What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 112 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 112 of 300

3040-01-563-4016
Shouldered Shaft Assembly

015634016
13017430: RNCC: 3 | RNVC: 2

9 May 2008

3040-01-563-5061
Straight Shaft

015635061
87011A0630-1: RNCC: 3 | RNVC: 2
87011A0630-1: RNCC: 3 | RNVC: 2
87011A0630-1: RNCC: 5 | RNVC: 9

13 May 2008

3040-01-563-6234
Linear Actuating Cylinder Piston Rod

015636234
5262835: RNCC: 3 | RNVC: 2
5272598 REV G ITEM 20: RNCC: 5 | RNVC: 2

15 May 2008

3040-01-564-3126
Counterbalance Weight

015643126
P70072-2T: RNCC: 3 | RNVC: 2
P70072-2T: RNCC: 5 | RNVC: 2
P70072-2T: RNCC: 5 | RNVC: 9

11 Jun 2008

3040-01-564-7914
Roller Chain Connecting And Offset Link Set

015647914
3685167C91: RNCC: 3 | RNVC: 2
3685167C1: RNCC: 5 | RNVC: 9
3685167C1L: RNCC: 5 | RNVC: 9

27 Jun 2008

3040-01-564-8351
Ball Joint Receptical

015648351
65-73-0005: RNCC: 3 | RNVC: 2
65-73-0005: RNCC: 3 | RNVC: 9

30 Jun 2008

3040-01-565-0759
Shouldered Shaft

015650759
4995082-003: RNCC: 3 | RNVC: 2

10 Jul 2008

3040-01-565-6484
Mechanically Actuated Spindle

015656484
FIG112-3: RNCC: 3 | RNVC: 2

1 Aug 2008

3040-01-566-9782
Shaft Idler

015669782
2061-AA3-002: RNCC: 3 | RNVC: 2
2061-AA3: RNCC: D | RNVC: 9

15 Sep 2008

3040-01-567-3553
Push-Pull Control Assembly

015673553
UFLMC0X36: RNCC: 3 | RNVC: 9
216-MC0X36: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-567-4711
Rigid Connecting Link

015674711
724S3847-101: RNCC: 3 | RNVC: 2

26 Sep 2008

3040-01-568-2235
Shouldered Shaft

015682235
3305AS1542-1: RNCC: 3 | RNVC: 2
3305AS1579 FIND 1: RNCC: 5 | RNVC: 2

23 Oct 2008

3040-01-568-1066
Shouldered Axle

015681066
6070083-CV42: RNCC: 3 | RNVC: 2

21 Oct 2008

3040-01-568-5989
Shouldered Shaft

015685989
3689080C2: RNCC: 3 | RNVC: 2
3689080C2L: RNCC: 5 | RNVC: 9
3689080C1L: RNCC: 5 | RNVC: 9

4 Nov 2008

3040-01-567-3531
Push-Pull Control Assembly

015673531
UFLMC0X28: RNCC: 3 | RNVC: 9
216-MC0X28: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-570-9639
Nonaircraft Mechanical Actuator

015709639
12505998: RNCC: 1 | RNVC: 2
16913-23: RNCC: 3 | RNVC: 2
16913: RNCC: 5 | RNVC: 9

21 Jan 2009

3040-01-571-1250
Linear Actuating Cylinder Cap

015711250
13017352: RNCC: 3 | RNVC: 2

23 Jan 2009

3040-01-572-5053
Remote Control Lever

015725053
29542692: RNCC: 3 | RNVC: 2
0744940: RNCC: 5 | RNVC: 2
165614: RNCC: 5 | RNVC: 2

12 Mar 2009

3040-01-572-3112
Control Cable Assembly

015723112
F079438: RNCC: 3 | RNVC: 2
F079453 ITEM 8: RNCC: 5 | RNVC: 2

6 Mar 2009

3040-01-573-5758
Shouldered Shaft

015735758
111956701: RNCC: 3 | RNVC: 9
111956701: RNCC: 5 | RNVC: 2

28 Apr 2009

3040-01-573-7482
Shouldered Shaft

015737482
24310-ZY6-710: RNCC: 3 | RNVC: 9

4 May 2009

3040-01-573-2490
Rigid Connecting Link

015732490
4299898: RNCC: 3 | RNVC: 2
4299898: RNCC: 5 | RNVC: 2

14 Apr 2009

3040-01-574-8808
Extension Shaft

015748808
M22-DZ-R-X0: RNCC: 3 | RNVC: 2
E22MRL: RNCC: 5 | RNVC: 9

12 Jun 2009

3040-01-574-1618
Rotary Actuating Cylinder Assembly

015741618
5007117: RNCC: 3 | RNVC: 2
5007117: RNCC: 5 | RNVC: 9

18 May 2009

3040-01-575-6502
Brake Drum

015756502
GUN 3687X: RNCC: 3 | RNVC: 2

10 Jul 2009

3040-01-576-2182
Rigid Connecting Link

015762182
1308M32G02: RNCC: 3 | RNVC: 2
1308M32G02: RNCC: 5 | RNVC: 2

23 Jul 2009

3040-01-576-6703
Rigid Connecting Link

015766703
A05-27895-000: RNCC: 3 | RNVC: 2
A05-27895: RNCC: D | RNVC: 9

11 Aug 2009

3040-01-577-2674
Rigid Connecting Link

015772674
1523895: RNCC: 3 | RNVC: 2

1 Sep 2009

3040-01-577-5671
Multiple Gears Gearshaft

015775671
29556458: RNCC: 3 | RNVC: 2
29556458: RNCC: 5 | RNVC: 2
29527781: RNCC: 5 | RNVC: 9

11 Sep 2009

3040-01-578-4239
Shaft Collar

015784239
MBCS13331: RNCC: 3 | RNVC: 2

6 Oct 2009

3040-01-578-3679
Planetary Gears Carrier

015783679
29530468: RNCC: 3 | RNVC: 2

2 Oct 2009

3040-01-581-0081
Piston Ring

015810081
B101514: RNCC: 3 | RNVC: 2
C105229 FIND 7: RNCC: 5 | RNVC: 2

4 Jan 2010

3040-01-583-8957
Shouldered Shaft

015838957
449-040-118-101: RNCC: 3 | RNVC: 2

9 Apr 2010

3040-01-584-4899
Straight Shaft

015844899
1003910: RNCC: 3 | RNVC: 2
1003910: RNCC: 3 | RNVC: 9
1003910T: RNCC: 5 | RNVC: 9

27 Apr 2010

3040-01-584-9249
Rigid Connecting Link

015849249
6443898-01M1: RNCC: 3 | RNVC: 2
6443898-01M1: RNCC: 3 | RNVC: 9
6443898-01M1: RNCC: 5 | RNVC: 2
6443898: RNCC: D | RNVC: 9

11 May 2010

3040-01-585-7943
Pawl

015857943
JA20121: RNCC: 3 | RNVC: 2

7 Jun 2010

3040-01-586-3659
Shaft Collar

015863659
32957524: RNCC: 3 | RNVC: 2

28 Jun 2010

3040-01-586-7506
Tension Spring Assembly

015867506
S11406-S: RNCC: 3 | RNVC: 9
S11406-S: RNCC: 5 | RNVC: 2

13 Jul 2010

3040-01-587-3480
Rigid Connecting Link

015873480
GS-5253: RNCC: 3 | RNVC: 2

3 Aug 2010

3040-01-589-0107
Linear Actuating Cylinder Assembly

015890107
45AF014: RNCC: 3 | RNVC: 2

14 Oct 2010

3040-01-589-4127
Control Cam

015894127
12521194: RNCC: 3 | RNVC: 2

25 Oct 2010

3040-01-591-3196
Shouldered Axle

015913196
074-07734-000: RNCC: 3 | RNVC: 2
074-07734-000: RNCC: 3 | RNVC: 9
333-D-7610ITEM18: RNCC: 5 | RNVC: 2

20 Jan 2011

3040-01-592-3259
Straight Shaft Assembly

015923259
4026AS840-1: RNCC: 3 | RNVC: 2
6408-S3-1-3: RNCC: 5 | RNVC: 9

2 Mar 2011

3040-01-592-7334
Rigid Connecting Link

015927334
1119AS124: RNCC: 3 | RNVC: 2

17 Mar 2011

3040-01-592-2602
Shaft Collar

015922602
6436K760: RNCC: 3 | RNVC: 2
10010548: RNCC: 7 | RNVC: 2

1 Mar 2011

3040-01-592-6035
Straight Shaft

015926035
CAU11939: RNCC: 1 | RNVC: 2
410-2158-C: RNCC: 3 | RNVC: 2
CAU11939: RNCC: 5 | RNVC: 2

14 Mar 2011

3040-01-592-8841
Manual Control Lever

015928841
3922AS124-2: RNCC: 3 | RNVC: 2
DV1745-016-2 L/H: RNCC: 5 | RNVC: 2

25 Mar 2011

3040-01-593-2119
Rigid Connecting Link

015932119
1590M22P01: RNCC: 3 | RNVC: 2

5 Apr 2011

3040-01-595-4625
Pivot Shaft Assembly

015954625
9720-276: RNCC: 3 | RNVC: 2

28 Apr 2011

3040-01-596-0278
Shouldered Axle

015960278
7548088-22: RNCC: 3 | RNVC: 2

10 May 2011

3040-01-596-0538
Straight Shaft

015960538
100-31-621: RNCC: 3 | RNVC: 2
1003DA-2-621 ITEM 3: RNCC: 5 | RNVC: 2

11 May 2011

3040-01-596-0616
Shaft Retaining Plate

015960616
M3992: RNCC: 3 | RNVC: 2
20201-01 PC 6: RNCC: 5 | RNVC: 1

11 May 2011

3040-01-596-6446
Flexible Drive Shaft

015966446
1800-09654: RNCC: 3 | RNVC: 2
1809019-20/4.3.1 ITEM 3: RNCC: 5 | RNVC: 2
1809019-20 / 4.3.1 ITEM 3: RNCC: 5 | RNVC: 9
1800-09654: RNCC: 5 | RNVC: 9

20 May 2011

3040-01-596-4500
Manual Control Lever Assembly

015964500
OP9002EY: RNCC: 3 | RNVC: 2

17 May 2011

3040-01-597-3395
Pneumatic Accumulator

015973395
0700-12719-27: RNCC: 3 | RNVC: 2

7 Jun 2011

3040-01-598-7832
Rigid Connecting Link

015987832
10014711: RNCC: 3 | RNVC: 2

26 Aug 2011

3040-01-598-8469
Body Hub

015988469
884011088A02: RNCC: 3 | RNVC: 2

30 Aug 2011

3040-01-599-1995
Piston Ring

015991995
853237: RNCC: 3 | RNVC: 2

15 Sep 2011

3040-01-599-1381
Retaining Plate Nrp

015991381
74A400705-2003: RNCC: 3 | RNVC: 2

13 Sep 2011

3040-01-600-4839
Linear Actuating Cylinder Head

016004839
622262-2L: RNCC: 3 | RNVC: 2

2 Dec 2011

3040-01-601-0945
Shouldered Shaft

016010945
52720821: RNCC: 3 | RNVC: 2
24KP270: RNCC: 5 | RNVC: 2
24KP270: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-1967
Rigid Connecting Link

016011967
7-511527009-101: RNCC: 3 | RNVC: 2

12 Jan 2012

3040-01-602-4030
Torsion Axle

016024030
AXTDF-07-66-00-AX: RNCC: 3 | RNVC: 2

30 Jan 2012

3040-01-602-9175
Housing Adapter

016029175
13602: RNCC: 3 | RNVC: 2
13602: RNCC: 3 | RNVC: 9
26KP421: RNCC: 5 | RNVC: 2
26KP421: RNCC: 5 | RNVC: 9

13 Feb 2012

3040-01-602-5335
Hub And Drum Assembly

016025335
008-277-71: RNCC: 3 | RNVC: 9
DX008-277-71: RNCC: 5 | RNVC: 2

31 Jan 2012

3040-01-602-9893
Spec Hub Assembly

016029893
008-277-05: RNCC: 3 | RNVC: 9
DX008-277-05: RNCC: 5 | RNVC: 2

15 Feb 2012

3040-01-603-9240
Rigid Connecting Link

016039240
65209-03085-042: RNCC: 3 | RNVC: 2
65209-03085-042: RNCC: 5 | RNVC: 2

22 Mar 2012

3040-01-604-1891
Spur Gearshaft

016041891
14003021: RNCC: 3 | RNVC: 9
14003016 ITEM NO. 5: RNCC: 5 | RNVC: 9
14003021: RNCC: C | RNVC: 1
14003016 ITEM NO. 5: RNCC: C | RNVC: 1
14003016: RNCC: D | RNVC: 9

29 Mar 2012

3040-01-604-5724
Push-Pull Control Assembly

016045724
KRF3000-35-THT: RNCC: 3 | RNVC: 2

9 Apr 2012

3040-01-604-9509
Housing Adapter

016049509
878584Q1: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-605-6258
Straight Shaft

016056258
08002183: RNCC: 3 | RNVC: 2
PL08002167 REV L FIND# 10: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-8545
Housing Adapter

016058545
HA5419: RNCC: 3 | RNVC: 2

26 Apr 2012

3040-01-606-0315
Shouldered Shaft

016060315
CL-6-HRPK-L: RNCC: 3 | RNVC: 2
030-001875-0001: RNCC: 7 | RNVC: 2
030-001875: RNCC: D | RNVC: 9

3 May 2012

3040-01-606-6166
Worm Shaft

016066166
00-916961: RNCC: 3 | RNVC: 2
PL-58130 IT 30: RNCC: 5 | RNVC: 2

22 May 2012

3040-01-607-0787
Plain Shoeassy

016070787
20-8593-1: RNCC: 3 | RNVC: 2
478596-002: RNCC: 5 | RNVC: 2

30 May 2012

3040-01-608-0246
Shaft Collar

016080246
B18180006: RNCC: 3 | RNVC: 2
B18180006: RNCC: 3 | RNVC: 9

20 Jun 2012

3040-01-608-5774
Push-Pull Control Assembly

016085774
40-132-TTL-BH-3: RNCC: 3 | RNVC: 2
F151503 REV A ITEM NO.: RNCC: D | RNVC: 9

3 Jul 2012

3040-01-526-9662
Body Hub

015269662
C33590: RNCC: 3 | RNVC: 2

13 Jan 2005

3040-01-527-2211
Shouldered Shaft Assembly

015272211
5-66-7321-00: RNCC: 3 | RNVC: 2
8-078-921-00 ITEM 8: RNCC: 5 | RNVC: 1

25 Jan 2005

3040-01-527-6861
Shouldered Shaft

015276861
11581502: RNCC: 3 | RNVC: 2

11 Feb 2005

3040-01-528-1577
Rigid Connecting Link

015281577
APC30201: RNCC: 3 | RNVC: 2
APC30201: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-528-0523
Housing Adapter

015280523
17-2-0232-1: RNCC: 3 | RNVC: 2
2116: RNCC: 5 | RNVC: 2

1 Mar 2005

3040-01-529-2939
Straight Shaft

015292939
752-7068428-70: RNCC: 3 | RNVC: 2
H8320350A-2A: RNCC: 5 | RNVC: 2
H832-0350-70: RNCC: 5 | RNVC: 9

12 Apr 2005

3040-01-529-9549
Straight Shaft

015299549
3417765: RNCC: 3 | RNVC: 2
3417765: RNCC: 5 | RNVC: 2

10 May 2005

3040-01-530-2979
Mechanical Drive Housing

015302979
DBA100: RNCC: 3 | RNVC: 2

20 May 2005

NSN 3040-01-530-4353 015304353 COOLER,FLUID,TRANSMISSION

3040-01-530-4353
Transmission Fluid Cooler

015304353
3N-8888: RNCC: 3 | RNVC: 2

26 May 2005

3040-01-530-6834
Straight Shaft

015306834
7550138-9: RNCC: 3 | RNVC: 2
7550079-22: RNCC: 5 | RNVC: 1
G545-4102-22: RNCC: 5 | RNVC: 1
G545-4105-9: RNCC: 5 | RNVC: 2
7550138-9: RNCC: 5 | RNVC: 2

8 Jun 2005

3040-01-531-6779
Rigid Connecting Link

015316779
111526: RNCC: 3 | RNVC: 2

19 Jul 2005

3040-01-531-4386
Ball Joint

015314386
6058K25: RNCC: 3 | RNVC: 2

8 Jul 2005

3040-01-532-3296
Linear Actuating Cylinder Assembly

015323296
496-3750: RNCC: 3 | RNVC: 2
496-3750: RNCC: 5 | RNVC: 2

4 Aug 2005

3040-01-532-6610
Extension Shaft

015326610
111408-1: RNCC: 3 | RNVC: 2

16 Aug 2005

3040-01-533-4099
Rigid Connecting Link

015334099
563-6404331-1: RNCC: 3 | RNVC: 2
14564973: RNCC: 5 | RNVC: 2

14 Sep 2005

3040-01-533-8882
Ball Joint

015338882
180-2232: RNCC: 3 | RNVC: 9
180-2232: RNCC: 5 | RNVC: 2
449-9328: RNCC: 5 | RNVC: 9

29 Sep 2005

3040-01-534-7344
Control Cam

015347344
VLRE-1.50-4: RNCC: 3 | RNVC: 2

1 Nov 2005

3040-01-536-4363
Shouldered Shaft

015364363
12484186: RNCC: 3 | RNVC: 2

4 Jan 2006

3040-01-535-5682
Counterbalance Weight

015355682
660509680: RNCC: 3 | RNVC: 2

5 Dec 2005

3040-01-536-6193
Straight Shaft

015366193
12446530: RNCC: 3 | RNVC: 2

10 Jan 2006

3040-01-538-3074
Shaft Collar

015383074
1632909: RNCC: 3 | RNVC: 2
249336: RNCC: 5 | RNVC: 9
256383: RNCC: 5 | RNVC: 9

17 Mar 2006

3040-01-539-3924
Detent Plate

015393924
12478262: RNCC: 3 | RNVC: 2

20 Apr 2006

3040-01-539-1907
Linear Actuating Cylinder Cap

015391907
9239762778: RNCC: 3 | RNVC: 2
923976.2778: RNCC: 5 | RNVC: 2
CV187247: RNCC: 5 | RNVC: 2
923976.2778: RNCC: 5 | RNVC: 2

13 Apr 2006

3040-01-539-8892
Straight Shaft

015398892
167-7066800-75: RNCC: 3 | RNVC: 2
H547-1803-75: RNCC: 5 | RNVC: 2

3 May 2006

3040-01-540-3475
Nonaircraft Mechanical Actuator

015403475
12486571: RNCC: 3 | RNVC: 2

16 May 2006

3040-01-540-3500
Shouldered Shaft Assembly

015403500
5000615: RNCC: 3 | RNVC: 2
5000615: RNCC: 3 | RNVC: 9
2012061: RNCC: 5 | RNVC: 9

16 May 2006

3040-01-539-9344
Linear Actuating Cylinder Assembly Parts Kit

015399344
AH149813: RNCC: 3 | RNVC: 2
AH149813: RNCC: 5 | RNVC: 2
AH149813: RNCC: 5 | RNVC: 2
AH149813: RNCC: 5 | RNVC: 9
AH149813: RNCC: 5 | RNVC: 9

4 May 2006

3040-01-540-3736
Shouldered Shaft

015403736
0346004: RNCC: 3 | RNVC: 9

17 May 2006

3040-01-541-7295
Linear Actuating Cylinder Assembly

015417295
PMC-5608: RNCC: 3 | RNVC: 2
5HB78: RNCC: 5 | RNVC: 2
6602660: RNCC: 5 | RNVC: 2
5HB78: RNCC: 5 | RNVC: 9

10 Jul 2006

3040-01-541-9528
Straight Shaft

015419528
F056641: RNCC: 3 | RNVC: 2
F056433 ITEM 4: RNCC: 5 | RNVC: 2

18 Jul 2006

3040-01-542-4039
Rigid Connecting Link

015424039
12501510: RNCC: 3 | RNVC: 2

3 Aug 2006

3040-01-542-2690
Electrical Special Purpose Cable Assembly

015422690
200-04333-0324: RNCC: 3 | RNVC: 2

27 Jul 2006

3040-01-542-8475
Rigid Connecting Link

015428475
F055213: RNCC: 3 | RNVC: 2
F053003 ITEM 6: RNCC: 5 | RNVC: 2

22 Aug 2006

3040-01-545-0416
Linear Actuating Cylinder Piston Rod

015450416
590/40666: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-0426
Linear Actuating Cylinder Piston Rod

015450426
590/40669: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-2724
Straight Shaft

015452724
60 328-0122-2: RNCC: 3 | RNVC: 2
01-435-0093-5PC73: RNCC: 5 | RNVC: 2

7 Nov 2006

3040-01-545-2669
Linear Actuating Cylinder Assembly

015452669
333/E3599: RNCC: 3 | RNVC: 2
CV165711H: RNCC: 5 | RNVC: 2
347/21011: RNCC: 5 | RNVC: 9

7 Nov 2006

3040-01-546-1406
Multiple Gears Gearshaft

015461406
4633-029-000: RNCC: 3 | RNVC: 2
4600PL FIND NO 8: RNCC: 5 | RNVC: 9

7 Dec 2006

3040-01-546-4128
Filler Service Unit

015464128
061482-100: RNCC: 3 | RNVC: 2

14 Dec 2006

3040-01-546-0235
Body Hub

015460235
29543361: RNCC: 3 | RNVC: 2
9KP999: RNCC: 5 | RNVC: 2
29543361: RNCC: 5 | RNVC: 2
9KP999: RNCC: 5 | RNVC: 9

4 Dec 2006

3040-01-547-2877
Rigid Connecting Link

015472877
8728-011-00Z: RNCC: 3 | RNVC: 2

17 Jan 2007

3040-01-547-4170
Rigid Connecting Link

015474170
4C22133-101A: RNCC: 3 | RNVC: 2

19 Jan 2007

3040-01-547-8668
Control Cam

015478668
7575841-001: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-548-5501
Manual Control Lever

015485501
F068179: RNCC: 3 | RNVC: 2
F067983 IT 12: RNCC: 5 | RNVC: 2
F067993 IT 12: RNCC: 5 | RNVC: 2

27 Feb 2007

3040-01-548-2505
Pivot Shaft Assembly

015482505
16232055-1: RNCC: 3 | RNVC: 2
16232051 FIND NO.1: RNCC: 5 | RNVC: 9
16232055-1: RNCC: 5 | RNVC: 9
16232050 FIND NO.1: RNCC: 5 | RNVC: 9
16232050 FIND NO.1: RNCC: C | RNVC: 1
16232051 FIND NO.1: RNCC: C | RNVC: 1

15 Feb 2007

3040-01-549-2114
Worm Wheel Gearshaft

015492114
CL40MRSBML-D: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-3219
Manual Control Lever

015493219
335/07901: RNCC: 3 | RNVC: 2

16 Mar 2007

3040-01-549-2017
Worm Wheel Gearshaft

015492017
CL40FRSBML-B: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-7920
Rigid Connecting Link

015497920
347/00248: RNCC: 3 | RNVC: 2

29 Mar 2007

3040-01-549-6454
Rigid Connecting Link

015496454
347/00195: RNCC: 3 | RNVC: 2

27 Mar 2007

3040-01-550-5800
Multiple Gears Gearshaft

015505800
85413201540: RNCC: 3 | RNVC: 2

24 Apr 2007

3040-01-551-2725
Straight Shaft

015512725
5114-004: RNCC: 3 | RNVC: 2
5114-004-00350: RNCC: 5 | RNVC: 9

11 May 2007

3040-01-551-6078
Manual Control Lever

015516078
234-0774: RNCC: 3 | RNVC: 2
234-0774: RNCC: 5 | RNVC: 2

22 May 2007

3040-01-551-5990
Push-Pull Control Assembly

015515990
234-0732: RNCC: 3 | RNVC: 2
CV152061D: RNCC: 5 | RNVC: 2
234-0732: RNCC: 5 | RNVC: 2

22 May 2007

3040-01-552-0086
Counterbalance Weight

015520086
38150-09424-101: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-552-0088
Counterbalance Weight

015520088
38150-09424-110: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-553-4208
Rigid Connecting Link

015534208
72100-580: RNCC: 3 | RNVC: 2
4000512: RNCC: 5 | RNVC: 9
72100-580: RNCC: 5 | RNVC: 9
17QF 457P313: RNCC: 5 | RNVC: 9

16 Jul 2007

3040-01-558-6103
Mechanically Actuated Spindle

015586103
114853-000 POS 150/151: RNCC: 3 | RNVC: 2
115110-000 POS 150/151: RNCC: 5 | RNVC: 2

15 Nov 2007

3040-01-558-7556
Rigid Connecting Link

015587556
P41190: RNCC: 3 | RNVC: 2
P41190: RNCC: 3 | RNVC: 2
AMBK4-4063: RNCC: 5 | RNVC: 2
AMBK4-4063: RNCC: 5 | RNVC: 2
P41190: RNCC: 5 | RNVC: 2
P41190: RNCC: 5 | RNVC: 2
AMBK4-4063: RNCC: 5 | RNVC: 2

20 Nov 2007

3040-01-559-4801
Mechanical Drive Housing Part

015594801
527-5942038 PIECE 8: RNCC: 3 | RNVC: 2
1313-2 PIECE 8: RNCC: 5 | RNVC: 9

19 Dec 2007

3040-01-554-1296
Control Cable Assembly

015541296
174-LTT-2-74.75: RNCC: 3 | RNVC: 2
1386F95FIND15: RNCC: 5 | RNVC: 2

31 Jul 2007

3040-01-554-2563
Shouldered Shaft

015542563
123AMM42153-1: RNCC: 3 | RNVC: 2
123AMM42153-1: RNCC: 5 | RNVC: 9
123AMM42153-1: RNCC: 5 | RNVC: 9

2 Aug 2007

3040-01-554-4408
Brake Shoe

015544408
826759: RNCC: 3 | RNVC: 2
50076285: RNCC: 5 | RNVC: 2

9 Aug 2007

3040-01-555-4499
Rigid Connecting Link

015554499
901-301-022-111: RNCC: 3 | RNVC: 2
USCTR-002-111: RNCC: 5 | RNVC: 2

6 Sep 2007

3040-01-559-0339
Rigid Connecting Link

015590339
P40890: RNCC: 3 | RNVC: 2
P40890: RNCC: 3 | RNVC: 2
AMBK4-4062: RNCC: 5 | RNVC: 2
P40890: RNCC: 5 | RNVC: 2
P40890: RNCC: 5 | RNVC: 2
AMBK4-4062: RNCC: 5 | RNVC: 2
AMBK4-4062: RNCC: 5 | RNVC: 2

3 Dec 2007

3040-01-562-3665
Shouldered Shaft

015623665
52137-1004-1: RNCC: 3 | RNVC: 2
52136 FIND 13: RNCC: 5 | RNVC: 1

7 Apr 2008

3040-01-562-2126
Straight Shaft

015622126
AM0-0087: RNCC: 3 | RNVC: 2

2 Apr 2008

3040-01-563-4448
Body Hub

015634448
8242881-1: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-564-0924
Rigid Connecting Link

015640924
4006-5A: RNCC: 3 | RNVC: 2
803-6397268 PC 164: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-564-2311
Control Cam

015642311
16874-64-75: RNCC: 3 | RNVC: 2

10 Jun 2008

3040-01-564-4925
Counterbalance Weight

015644925
P70072-1T: RNCC: 1 | RNVC: 2
P70072-1T: RNCC: 3 | RNVC: 2
P70072-: RNCC: 5 | RNVC: 9

18 Jun 2008

3040-01-564-7922
Vehicular Components Bracket

015647922
3685169C1: RNCC: 3 | RNVC: 2
3685169C1L: RNCC: 5 | RNVC: 9

27 Jun 2008

3040-01-564-6463
Rigid Connecting Link

015646463
RD-3-7291-0P: RNCC: 3 | RNVC: 2
RD-3-7291-0: RNCC: 5 | RNVC: 9

24 Jun 2008

3040-01-564-9968
Ball Joint

015649968
0304677: RNCC: 3 | RNVC: 2
0304677: RNCC: 5 | RNVC: 9

8 Jul 2008

3040-01-565-2577
Rigid Connecting Link

015652577
39068-1: RNCC: 3 | RNVC: 2

17 Jul 2008

3040-01-565-7565
Rigid Connecting Link

015657565
B-090106X40TBDA: RNCC: 3 | RNVC: 2

6 Aug 2008

3040-01-566-1709
Pivot Shaft Assembly

015661709
105-200566-001: RNCC: 3 | RNVC: 2

22 Aug 2008

3040-01-566-6891
Linear Actuating Cylinder Assembly

015666891
MIL-001-080: RNCC: 3 | RNVC: 2

8 Sep 2008

3040-01-567-3529
Push-Pull Control Assembly

015673529
UFLMC0X26: RNCC: 3 | RNVC: 9
216-MC0X26: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-568-4000
Mechanical Drive Housing

015684000
YZ121051: RNCC: 3 | RNVC: 2
YZ121325: RNCC: 3 | RNVC: 9

29 Oct 2008

3040-01-568-1247
Inertia Damper

015681247
12505368-001: RNCC: 3 | RNVC: 2

21 Oct 2008

3040-01-570-0741
Rigid Connecting Link

015700741
136884: RNCC: 3 | RNVC: 2
136884: RNCC: 5 | RNVC: 9
136884: RNCC: 7 | RNVC: 2

16 Dec 2008

3040-01-570-5855
Body Hub

015705855
A8 333A4317: RNCC: 3 | RNVC: 2

7 Jan 2009

3040-01-570-7420
Mechanical Drive Housing

015707420
1HT178: RNCC: 3 | RNVC: 2
1HT178: RNCC: 5 | RNVC: 9
SA88210094: RNCC: C | RNVC: 1

13 Jan 2009

3040-01-570-7505
Straight Shaft

015707505
12506001-004: RNCC: 3 | RNVC: 2
12506001: RNCC: D | RNVC: 9

13 Jan 2009

3040-01-572-2455
Straight Shaft Assembly

015722455
4040301: RNCC: 3 | RNVC: 2

4 Mar 2009

3040-01-572-3441
Rigid Connecting Link

015723441
1900-43025-40: RNCC: 3 | RNVC: 2

9 Mar 2009

3040-01-572-3739
Pivot Shaft Assembly

015723739
154247: RNCC: 3 | RNVC: 2
1624442: RNCC: 5 | RNVC: 2
12491682: RNCC: D | RNVC: 9

10 Mar 2009

3040-01-573-1077
Counterbalance Weight

015731077
23071999-5: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-7833
Shaft Retaining Plate

015737833
24124-ZY6-000: RNCC: 3 | RNVC: 9

5 May 2009

3040-01-575-3347
Nonaircraft Mechanical Actuator

015753347
0511/15S731100: RNCC: 3 | RNVC: 2
0511 REV N AND PL 0511 REV G: RNCC: 5 | RNVC: 2

29 Jun 2009

3040-01-575-6352
Hub Cam Drive Gear

015756352
DDE 23524883: RNCC: 3 | RNVC: 2
23524883: RNCC: 5 | RNVC: 2
23524883: RNCC: D | RNVC: 9

10 Jul 2009

3040-01-576-4799
Shouldered Shaft Assembly

015764799
1D6004-5AEQ: RNCC: 3 | RNVC: 2

3 Aug 2009

3040-01-577-4976
Mechanical Drive Housing

015774976
3817500: RNCC: 3 | RNVC: 2
3817500: RNCC: 5 | RNVC: 9

9 Sep 2009

3040-01-577-9801
Nonaircraft Mechanical Actuator

015779801
R0094764: RNCC: 3 | RNVC: 2
R0094764: RNCC: 5 | RNVC: 2
R0094764-0300: RNCC: D | RNVC: 9

23 Sep 2009

3040-01-577-6141
Body Hub

015776141
2428863: RNCC: 3 | RNVC: 2

14 Sep 2009

3040-01-578-3123
Rigid Connecting Link

015783123
10007662: RNCC: 3 | RNVC: 2

1 Oct 2009

3040-01-578-6449
Shouldered Shaft

015786449
4102230-1: RNCC: 3 | RNVC: 2
4102230-1: RNCC: 5 | RNVC: 9

14 Oct 2009

3040-01-579-0127
Pedal Pad

015790127
HJFC-0007: RNCC: 3 | RNVC: 2

28 Oct 2009

3040-01-579-4844
Mechanical Drive Housing

015794844
5007686: RNCC: 3 | RNVC: 2
ZB5007686: RNCC: 5 | RNVC: 2

13 Nov 2009

3040-01-579-7806
Rigid Connecting Link

015797806
2-16877OH-56-75: RNCC: 3 | RNVC: 2
6439689-01M1: RNCC: 5 | RNVC: 2
12537520-1: RNCC: 7 | RNVC: 2
6439689-01M1: RNCC: 7 | RNVC: 2
6439689: RNCC: D | RNVC: 9
12537520: RNCC: D | RNVC: 9

23 Nov 2009

3040-01-579-6785
Swingarm Assembly

015796785
13021522: RNCC: 1 | RNVC: 2
M10-001-LAV: RNCC: 3 | RNVC: 2

19 Nov 2009

3040-01-579-9041
Linear Actuating Cylinder Piston

015799041
3796799: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-581-1069
Housing Adapter

015811069
200713051-01: RNCC: 3 | RNVC: 2
200713051: RNCC: D | RNVC: 9

6 Jan 2010

3040-01-581-1616
Shouldered Shaft

015811616
765338: RNCC: 3 | RNVC: 2

7 Jan 2010

3040-01-581-1624
Manual Control Lever

015811624
200713039-01: RNCC: 3 | RNVC: 2
200713039: RNCC: D | RNVC: 9

7 Jan 2010

3040-01-580-4387
Rigid Connecting Link

015804387
2721622: RNCC: 3 | RNVC: 2

15 Dec 2009

3040-01-581-6682
Machined Main Housing

015816682
6620258-1: RNCC: 3 | RNVC: 2

25 Jan 2010

3040-01-582-3412
Hub Clamp

015823412
S3600Y-J124: RNCC: 3 | RNVC: 2

17 Feb 2010

3040-01-582-5792
Housing Adapter

015825792
MT93-1324: RNCC: 3 | RNVC: 2
22KP281: RNCC: 7 | RNVC: 2

26 Feb 2010

3040-01-583-2763
Rigid Connecting Link

015832763
0312105969-00: RNCC: 3 | RNVC: 2
26KP372: RNCC: 7 | RNVC: 2

22 Mar 2010

3040-01-583-7427
Spur Gearshaft

015837427
24718: RNCC: 3 | RNVC: 2
24718: RNCC: 5 | RNVC: 1

5 Apr 2010

3040-01-584-1553
Control Cam

015841553
203221-1: RNCC: 3 | RNVC: 2
203221-1: RNCC: 3 | RNVC: 9

19 Apr 2010

3040-01-584-5627
Ball Joint

015845627
59915K272: RNCC: 3 | RNVC: 2

29 Apr 2010

3040-01-585-6199
Straight Shaft

015856199
449-040-119-101: RNCC: 3 | RNVC: 2

1 Jun 2010

3040-01-585-4430
Hub Clamp

015854430
3880610C1: RNCC: 3 | RNVC: 2
69158-000: RNCC: 5 | RNVC: 9

26 May 2010

3040-01-587-9788
Body Hub

015879788
9930.5703: RNCC: 3 | RNVC: 2
2DB26: RNCC: 5 | RNVC: 2
2DB26: RNCC: 5 | RNVC: 9

27 Aug 2010

3040-01-588-2086
Ballscrew Assembly

015882086
30295-3028: RNCC: 3 | RNVC: 2
40002467-001: RNCC: 5 | RNVC: 2
30295-3028: RNCC: 5 | RNVC: 9

7 Sep 2010

3040-01-589-2485
Shouldered Shaft

015892485
MBCS13168: RNCC: 3 | RNVC: 2
MBCS13168: RNCC: 5 | RNVC: 9

22 Oct 2010

3040-01-589-9898
Mechanical Drive Housing

015899898
04-20138: RNCC: 1 | RNVC: 2
119803-01500: RNCC: 3 | RNVC: 2
719803-01500: RNCC: 3 | RNVC: 2
119803-01500: RNCC: 5 | RNVC: 9
719803-01500: RNCC: 5 | RNVC: 9
04-20138: RNCC: D | RNVC: 9

10 Nov 2010

3040-01-590-1587
Straight Shaft Assembly

015901587
122728-1: RNCC: 3 | RNVC: 2

22 Nov 2010

3040-01-591-1704
Bell Crank

015911704
R0147355: RNCC: 3 | RNVC: 2
R0147355: RNCC: 5 | RNVC: 2
R0147355-0103: RNCC: D | RNVC: 9

13 Jan 2011

3040-01-591-1764
Shaft Collar

015911764
R190,707: RNCC: 3 | RNVC: 9
R190,707: RNCC: 5 | RNVC: 2

13 Jan 2011

3040-01-589-4909
Rigid Connecting Link

015894909
3671240C01003-7: RNCC: 3 | RNVC: 2
3671240C01003-7: RNCC: 3 | RNVC: 9

27 Oct 2010

3040-01-592-1444
Shouldered Shaft

015921444
6408-S3-1-10: RNCC: 3 | RNVC: 2

23 Feb 2011

3040-01-593-5457
Shaft Collar

015935457
764006: RNCC: 3 | RNVC: 2

11 Apr 2011

3040-01-593-0048
Straight Shaft

015930048
6563: RNCC: 3 | RNVC: 2
12478085: RNCC: 5 | RNVC: 2

31 Mar 2011

3040-01-595-9373
Shaft Collar

015959373
84001217-002: RNCC: 3 | RNVC: 2
84001217-002: RNCC: 5 | RNVC: 9

9 May 2011

3040-01-596-0294
Shaft Retaining Plate

015960294
M3978: RNCC: 3 | RNVC: 2
20201-01 PC 4: RNCC: 5 | RNVC: 1

10 May 2011

3040-01-596-1559
Hanger Shaft

015961559
12147-505: RNCC: 3 | RNVC: 2
207-8424619ITEM2: RNCC: D | RNVC: 9

13 May 2011

3040-01-596-3674
Control Cable Assembly

015963674
95255A224: RNCC: 3 | RNVC: 2

16 May 2011

3040-01-597-1148
Rigid Connecting Link

015971148
04-21076: RNCC: 3 | RNVC: 2

27 May 2011

3040-01-598-7159
Brake Band And Lining

015987159
DMD-2903: RNCC: 3 | RNVC: 2

23 Aug 2011

3040-01-598-8472
Ball Joint

015988472
R0071166: RNCC: 3 | RNVC: 2
R0071166: RNCC: 5 | RNVC: 2
R0071166-0301: RNCC: D | RNVC: 9

30 Aug 2011

3040-01-600-2630
Rigid Connecting Link

016002630
114210-14400: RNCC: 3 | RNVC: 2
114210-14400: RNCC: 3 | RNVC: 9

18 Nov 2011

3040-01-603-9773
Bell Crank

016039773
R0147356: RNCC: 3 | RNVC: 2
R0147356: RNCC: 5 | RNVC: 2
R0147356-0103: RNCC: D | RNVC: 9

23 Mar 2012

3040-01-603-9761
Bell Crank

016039761
R0147354: RNCC: 3 | RNVC: 2
R0147354: RNCC: 5 | RNVC: 2
R0147354-0103: RNCC: D | RNVC: 9

23 Mar 2012

3040-01-605-3975
Hydraulic Control Assembly

016053975
347/20856: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-604-8239
Mechanical Drive Housing

016048239
12549117: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-606-0085
Multiple Gears Gearshaft

016060085
53362: RNCC: 3 | RNVC: 2

3 May 2012

3040-01-606-0165
Shouldered Shaft

016060165
25KP176: RNCC: 3 | RNVC: 2
25KP176: RNCC: 3 | RNVC: 9

3 May 2012

3040-01-606-1467
Body Hub

016061467
CR1612: RNCC: 3 | RNVC: 2

9 May 2012

3040-01-606-6661
Shaft Collar

016066661
42093D79: RNCC: 3 | RNVC: 2
42093D79: RNCC: 5 | RNVC: 2

22 May 2012

3040-01-606-7609
Flexible Casing End Fitting

016067609
2ABS12011: RNCC: 3 | RNVC: 2
2ABS12011: RNCC: 3 | RNVC: 9

23 May 2012

3040-01-607-1095
Shaft Retaining Plate

016071095
R8505956-SP102: RNCC: 3 | RNVC: 2
R8505956-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-608-3074
Mechanical Drive Housing

016083074
1641-8294A19: RNCC: 3 | RNVC: 2

22 Jun 2012

3040-01-608-4970
Shaft Collar

016084970
3808440: RNCC: 3 | RNVC: 2
3808440: RNCC: 5 | RNVC: 9

28 Jun 2012

3040-01-559-4817
Pneumatic Actuator Cylinder Housing

015594817
89U200463JJ0133: RNCC: 3 | RNVC: 2
80-0355: RNCC: 5 | RNVC: 2

19 Dec 2007

3040-01-560-2688
Pivot Shaft Assembly

015602688
4660128-002: RNCC: 3 | RNVC: 2
4660128-0002: RNCC: 3 | RNVC: 9
4660128-002: RNCC: 5 | RNVC: 2
4660128-01M1: RNCC: 5 | RNVC: 9
4660128-002: RNCC: 5 | RNVC: 9
4660128: RNCC: D | RNVC: 9

23 Jan 2008

3040-01-560-8083
Helical Gear And Shaft Assembly

015608083
5397: RNCC: 3 | RNVC: 2

13 Feb 2008

3040-01-559-4464
Rigid Connecting Link

015594464
74A410576-1005: RNCC: 3 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 9
74A410576-1005: RNCC: 5 | RNVC: 9
10448312: RNCC: 6 | RNVC: 9
74A410576-1005: RNCC: C | RNVC: 1

18 Dec 2007

3040-01-547-6239
Linear Actuating Cylinder Piston

015476239
16242006-1: RNCC: 3 | RNVC: 2
16241014 FIND NO. 7: RNCC: 5 | RNVC: 2
16242006-1: RNCC: 5 | RNVC: 9

26 Jan 2007

3040-01-553-7494
Rigid Connecting Link

015537494
036361: RNCC: 3 | RNVC: 9
36361: RNCC: 5 | RNVC: 9
36361: RNCC: 5 | RNVC: 9
036361: RNCC: 5 | RNVC: 9
036361: RNCC: 5 | RNVC: 9

24 Jul 2007

3040-01-559-0338
Rigid Connecting Link

015590338
P40840: RNCC: 3 | RNVC: 2
P40840: RNCC: 3 | RNVC: 2
AMBK4-4058: RNCC: 5 | RNVC: 2
P40840: RNCC: 5 | RNVC: 2

3 Dec 2007

3040-01-554-2714
Planetary Gears Carrier

015542714
29531249: RNCC: 3 | RNVC: 2

3 Aug 2007

3040-01-553-9926
Housing Adapter

015539926
77872973: RNCC: 3 | RNVC: 2
77872973: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-559-8295
Straight Shaft

015598295
802011213907-1: RNCC: 3 | RNVC: 2

8 Jan 2008

3040-01-559-8729
Turn Signal Housing

015598729
7HB417: RNCC: 3 | RNVC: 2
7HB417: RNCC: 3 | RNVC: 9
456116: RNCC: 5 | RNVC: 2

8 Jan 2008

3040-01-561-8536
Shouldered Shaft

015618536
AM0-0121P: RNCC: 3 | RNVC: 2
AM0-0121: RNCC: 3 | RNVC: 9

20 Mar 2008

3040-01-562-0887
Linear Actuating Cylinder Assembly Parts Kit

015620887
3J16630: RNCC: 3 | RNVC: 2

28 Mar 2008

3040-01-555-0812
Control Cable Assembly

015550812
18505909: RNCC: 3 | RNVC: 2
18505900 / PN-8505909: RNCC: 5 | RNVC: 2

29 Aug 2007

3040-01-562-2122
Shouldered Shaft

015622122
AM0-0089: RNCC: 3 | RNVC: 2

2 Apr 2008

3040-01-563-0477
Nonaircraft Mechanical Actuator

015630477
880665T01: RNCC: 3 | RNVC: 2
880665T01: RNCC: 5 | RNVC: 2
880665T01: RNCC: 5 | RNVC: 2

30 Apr 2008

3040-01-563-4903
Manual Control Lever

015634903
155L3151K: RNCC: 3 | RNVC: 2

13 May 2008

3040-01-563-5160
Rigid Connecting Link

015635160
6031769: RNCC: 3 | RNVC: 2

13 May 2008

3040-01-563-6616
Worm Shaft

015636616
993800-2: RNCC: 3 | RNVC: 2
993015 ITEM 37: RNCC: 5 | RNVC: 2

16 May 2008

3040-01-557-4807
Rigid Connecting Link

015574807
HP892105-1: RNCC: 3 | RNVC: 2
HP892105-1: RNCC: 3 | RNVC: 9

24 Oct 2007

3040-01-526-5028
Flexible Shaft Assembly

015265028
65042-97FT0IN: RNCC: 3 | RNVC: 2
P-2366 SH 3, FN 9: RNCC: 5 | RNVC: 2
65042-097FT0IN: RNCC: 5 | RNVC: 9

20 Dec 2004

3040-01-527-1493
Body Hub

015271493
SDS1-1/8: RNCC: 3 | RNVC: 2
7010437: RNCC: 3 | RNVC: 2
05506-SDS1-1/8: RNCC: 5 | RNVC: 9

21 Jan 2005

3040-01-527-3395
Rigid Connecting Link

015273395
69-9605-18: RNCC: 3 | RNVC: 2
69-9605: RNCC: D | RNVC: 9

28 Jan 2005

3040-01-527-3390
Rigid Connecting Link

015273390
69-9605-20: RNCC: 3 | RNVC: 2
69-9605: RNCC: D | RNVC: 9

28 Jan 2005

3040-01-528-5400
Rigid Connecting Link

015285400
74A672480-2003: RNCC: 3 | RNVC: 2

17 Mar 2005

3040-01-530-0755
Shaft Collar

015300755
BA020383071503: RNCC: 3 | RNVC: 2
602-038300-0011: RNCC: 5 | RNVC: 2
602-038300-0011: RNCC: 5 | RNVC: 9

13 May 2005

3040-01-530-0491
Hub Clamp

015300491
20038184: RNCC: 3 | RNVC: 2
SC2-1250: RNCC: C | RNVC: 1

12 May 2005

3040-01-528-2817
Linear Actuating Cylinder Assembly

015282817
213.24.620.06: RNCC: 3 | RNVC: 2

9 Mar 2005

3040-01-528-1595
Rigid Connecting Link

015281595
APC30055: RNCC: 3 | RNVC: 2
APC30055: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-530-0763
Shaft Collar

015300763
BA020383174100: RNCC: 3 | RNVC: 2
602-038310-0018: RNCC: 5 | RNVC: 2
BA0200383174100: RNCC: 5 | RNVC: 9
602-038310-0018: RNCC: 5 | RNVC: 9

13 May 2005

3040-01-530-4163
Shaft And Tube Support Assembly

015304163
754-6726717-AY96: RNCC: 3 | RNVC: 2
6726717 AY96: RNCC: 5 | RNVC: 2
211096748: RNCC: 5 | RNVC: 2
211096748: RNCC: 5 | RNVC: 9

26 May 2005

3040-01-530-0926
Rigid Connecting Link

015300926
393HN3047-1: RNCC: 3 | RNVC: 2
393HN3047-1: RNCC: 5 | RNVC: 9
393HN3047-1: RNCC: 5 | RNVC: 9

13 May 2005

3040-01-530-1998
Control Cam

015301998
7642216: RNCC: 3 | RNVC: 2

18 May 2005

3040-01-530-5181
Spur Gearshaft

015305181
152651: RNCC: 3 | RNVC: 2

1 Jun 2005

3040-01-527-7357
Flexible Shaft Assembly

015277357
107318-A1 REV C: RNCC: 3 | RNVC: 2
107318-A1: RNCC: 5 | RNVC: 9
GWB 687.35: RNCC: 5 | RNVC: 9

15 Feb 2005

3040-01-534-7886
Control Cam

015347886
123AM40034-15: RNCC: 3 | RNVC: 2
123AM40034-15: RNCC: 5 | RNVC: 9
123AM40034: RNCC: D | RNVC: 9

2 Nov 2005

3040-01-534-7438
Shouldered Shaft

015347438
DTA183072: RNCC: 3 | RNVC: 2
DTA183072: RNCC: 5 | RNVC: 2

1 Nov 2005

3040-01-536-3889
Control Cam

015363889
A-582: RNCC: 3 | RNVC: 2

3 Jan 2006

3040-01-535-9809
Housing Adapter

015359809
7-311330131-9: RNCC: 3 | RNVC: 2
7-311330131: RNCC: E | RNVC: 8

15 Dec 2005

3040-01-536-8085
Shouldered Shaft

015368085
6426976-1: RNCC: 3 | RNVC: 2
6426976-1: RNCC: 3 | RNVC: 9
30B95-46C: RNCC: 5 | RNVC: 2

17 Jan 2006

3040-01-537-3478
Remote Control Lever

015373478
047-070-00: RNCC: 3 | RNVC: 9

3 Feb 2006

3040-01-539-4352
Shouldered Shaft

015394352
3-55598-2: RNCC: 3 | RNVC: 2

20 Apr 2006

3040-01-541-8537
Linear Actuating Cylinder Assembly

015418537
3301387: RNCC: 3 | RNVC: 2
4HB878: RNCC: 5 | RNVC: 2
4HB878: RNCC: 5 | RNVC: 9

13 Jul 2006

3040-01-541-2121
Control Pedal

015412121
1000195-0102: RNCC: 1 | RNVC: 2
05-20110-001: RNCC: 3 | RNVC: 2
131508: RNCC: 3 | RNVC: 9
0421-HH4-007: RNCC: 5 | RNVC: 2
132244: RNCC: 5 | RNVC: 9
4001376: RNCC: 5 | RNVC: 9
0421-HH4: RNCC: D | RNVC: 9

20 Jun 2006

3040-01-541-9393
Tension Spring Assembly

015419393
31B63-00500: RNCC: 3 | RNVC: 2
31B63-00500: RNCC: 3 | RNVC: 9

18 Jul 2006

3040-01-541-1488
Straight Shaft

015411488
GTHB-99-17-045-0: RNCC: 3 | RNVC: 2

16 Jun 2006

3040-01-540-0437
Shouldered Shaft

015400437
7491073: RNCC: 3 | RNVC: 2
8878051122: RNCC: 5 | RNVC: 2
7491073: RNCC: 5 | RNVC: 2

8 May 2006

3040-01-544-5908
Housing Adapter

015445908
2207171: RNCC: 3 | RNVC: 2

17 Oct 2006

3040-01-545-2758
Rigid Connecting Link

015452758
5V4998: RNCC: 3 | RNVC: 2
5V-4998: RNCC: 5 | RNVC: 2

7 Nov 2006

3040-01-545-6529
Linear Actuating Cylinder Head

015456529
595/27704: RNCC: 3 | RNVC: 2

20 Nov 2006

3040-01-546-1251
Ai Fill Pump Ac Oil

015461251
061476-100: RNCC: 3 | RNVC: 2

7 Dec 2006

3040-01-546-1824
Flexible Shaft Assembly Casing

015461824
112908: RNCC: 3 | RNVC: 2

8 Dec 2006

3040-01-546-2087
Straight Shaft Assembly

015462087
246-5949: RNCC: 3 | RNVC: 2

11 Dec 2006

3040-01-547-7960
Aircraft Fork Assy

015477960
42555-274: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-548-6129
Flexible Shafting

015486129
57353-14: RNCC: 3 | RNVC: 2

28 Feb 2007

3040-01-548-7185
Straight Shaft Assembly

015487185
12270483: RNCC: 3 | RNVC: 2

2 Mar 2007

3040-01-548-7223
Horizo Assy Sheave

015487223
F063153: RNCC: 3 | RNVC: 2
F059593 IT 2: RNCC: 5 | RNVC: 2

2 Mar 2007

3040-01-549-1874
Worm Wheel Gearshaft

015491874
CL40FRSBML-E: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-551-2279
Rigid Connecting Link

015512279
74A182200-1006: RNCC: 3 | RNVC: 2
74A182200-1004: RNCC: E | RNVC: 8

10 May 2007

3040-01-550-3859
Breather

015503859
P562492: RNCC: 3 | RNVC: 2
P562-492: RNCC: 5 | RNVC: 9
RPS-40-5-N12: RNCC: 5 | RNVC: 9
802027299963-1: RNCC: C | RNVC: 1

18 Apr 2007

3040-01-551-9381
Control Cable Assembly

015519381
D-WK-871-73-ASO: RNCC: 3 | RNVC: 2
H-WK-871-8 PC5: RNCC: 5 | RNVC: 2

31 May 2007

3040-01-552-0085
Counterbalance Weight

015520085
38150-09424-102: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-552-1137
Mechanical Drive Housing Part

015521137
190300: RNCC: 3 | RNVC: 2
190300: RNCC: 3 | RNVC: 9

6 Jun 2007

3040-01-552-1765
Nonrotating Shaft Eye Bracket

015521765
5HB334: RNCC: 3 | RNVC: 2
5151-120: RNCC: 5 | RNVC: 2
5HB334: RNCC: 5 | RNVC: 9

7 Jun 2007

3040-01-552-1740
Shaft Retaining Plate

015521740
D-WK-871-38 PC7: RNCC: 3 | RNVC: 2
H-WK-871-3 PC13: RNCC: 5 | RNVC: 1
D-WK-871-29 PC13: RNCC: 5 | RNVC: 2

7 Jun 2007

3040-01-552-2725
Rigid Connecting Link

015522725
70400-02125-046: RNCC: 3 | RNVC: 2

9 Jun 2007

3040-01-558-2017
Mechanical Drive Housing

015582017
3657160: RNCC: 3 | RNVC: 2
3657160: RNCC: 5 | RNVC: 9

2 Nov 2007

3040-01-553-9001
Linear Actuating Cylinder Assembly

015539001
19550312: RNCC: 3 | RNVC: 2
19550312: RNCC: 5 | RNVC: 2
19550312: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-0947
Pneumatic Actuator Cylinder Housing

015540947
27052512: RNCC: 3 | RNVC: 2
27052512: RNCC: 5 | RNVC: 9

30 Jul 2007

3040-01-559-3971
Shouldered Shaft

015593971
TX70-ATS ITEM 16: RNCC: 3 | RNVC: 2
TX70-ATS ITEM 16: RNCC: 3 | RNVC: 9

17 Dec 2007

3040-01-559-8322
Spur Gearshaft

015598322
16211210-20: RNCC: 3 | RNVC: 2
16211210-20: RNCC: 3 | RNVC: 9
16211210 ITEM 6: RNCC: 5 | RNVC: 1

8 Jan 2008

3040-01-554-7197
Differential Gear Unit

015547197
12112-1503: RNCC: 3 | RNVC: 2
7291745 ITEM 3: RNCC: 5 | RNVC: 2

17 Aug 2007

3040-01-554-5425
Mounting Coupling

015545425
PAAI006876: RNCC: 3 | RNVC: 2

14 Aug 2007

3040-01-554-8861
Module Pinion

015548861
RI150Z12B38: RNCC: 3 | RNVC: 2
K77 ITEM17: RNCC: 5 | RNVC: 2

22 Aug 2007

3040-01-555-4496
Rigid Connecting Link

015554496
901-301-022-113: RNCC: 3 | RNVC: 2
USCTR-001-113: RNCC: 5 | RNVC: 2
901-301-023-113: RNCC: E | RNVC: 8

6 Sep 2007

3040-01-555-4497
Rigid Connecting Link

015554497
901-301-022-125: RNCC: 1 | RNVC: 2
USCTR-001-125: RNCC: 3 | RNVC: 2

6 Sep 2007

3040-01-562-0968
Linear Actuating Cylinder Assembly Parts Kit

015620968
3J16889: RNCC: 3 | RNVC: 2

28 Mar 2008

3040-01-555-9929
Flexible Drive Shaft

015559929
820201-1: RNCC: 3 | RNVC: 9
906010-5-1PL FIND NO 23: RNCC: 5 | RNVC: 9
820201-1: RNCC: C | RNVC: 1
906010-5-1PL FIND NO 23: RNCC: C | RNVC: 1

20 Sep 2007

3040-01-556-7265
Linear Actuating Cylinder Assembly

015567265
AMD-1721: RNCC: 3 | RNVC: 2

4 Oct 2007

3040-01-557-2749
Shouldered Shaft

015572749
DBA007: RNCC: 3 | RNVC: 2

17 Oct 2007

3040-01-557-0732
Shouldered Shaft

015570732
08686-01: RNCC: 3 | RNVC: 2
10004176: RNCC: 5 | RNVC: 2
0868601: RNCC: 5 | RNVC: 2

11 Oct 2007

3040-01-564-0285
Rigid Connecting Link

015640285
B-090106X16-HISB: RNCC: 3 | RNVC: 2
803-6397269 PC 17 MOD: RNCC: 5 | RNVC: 2

3 Jun 2008

3040-01-564-0366
Nonaircraft Mechanical Actuator

015640366
3683201C91: RNCC: 3 | RNVC: 2
3683201C91L: RNCC: 5 | RNVC: 9

3 Jun 2008

3040-01-564-2103
Shoe Type Brake

015642103
3596013: RNCC: 1 | RNVC: 2
K027788: RNCC: 3 | RNVC: 2
331227: RNCC: 5 | RNVC: 9
3596013: RNCC: 5 | RNVC: 9

9 Jun 2008

3040-01-564-3125
Counterbalance Weight

015643125
P70072-3C: RNCC: 3 | RNVC: 2

11 Jun 2008

3040-01-564-6081
Bell Crank

015646081
60-30-0001: RNCC: 3 | RNVC: 9
60-30-0001: RNCC: 5 | RNVC: 2

23 Jun 2008

3040-01-564-9707
Shouldered Shaft

015649707
25-65-0001: RNCC: 3 | RNVC: 2
25-65-0001: RNCC: 3 | RNVC: 9

7 Jul 2008

3040-01-565-9646
Shouldered Shaft

015659646
3553706: RNCC: 3 | RNVC: 2
3553706: RNCC: 5 | RNVC: 9

14 Aug 2008

3040-01-565-2040
Traversing Shaft

015652040
13017440: RNCC: 3 | RNVC: 2

15 Jul 2008

3040-01-565-8939
Pawl

015658939
7N-0914: RNCC: 3 | RNVC: 2

12 Aug 2008

3040-01-566-9784
Transfer To I Shaft

015669784
0928-PP2-235: RNCC: 3 | RNVC: 2

15 Sep 2008

3040-01-566-8691
Shouldered Shaft

015668691
7251582: RNCC: 3 | RNVC: 2

12 Sep 2008

3040-01-566-9685
Rigid Connecting Link

015669685
4294423: RNCC: 3 | RNVC: 2
4294423: RNCC: 5 | RNVC: 2

15 Sep 2008

3040-01-567-3548
Push-Pull Control Assembly

015673548
UFLMC0X32: RNCC: 3 | RNVC: 9
216-MC0X32: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-567-7196
Cylinderzhydraulicz

015677196
P03704: RNCC: 3 | RNVC: 2
MWW: RNCC: 3 | RNVC: 2
E108130 FIND 114: RNCC: 5 | RNVC: 2
CDT4MP1/2.00/1.00/1.50Z1X/S22HHU: RNCC: 5 | RNVC: 9

3 Oct 2008

3040-01-568-5036
Mechanical Drive Housing

015685036
13018032: RNCC: 3 | RNVC: 2

31 Oct 2008

3040-01-568-5212
Counter-Weight

015685212
12505310: RNCC: 3 | RNVC: 2
12505310: RNCC: 5 | RNVC: 2

3 Nov 2008

3040-01-569-0268
Spline Adapter

015690268
AT300740: RNCC: 3 | RNVC: 2

18 Nov 2008

3040-01-569-0222
Mechanical Drive Housing

015690222
5400-999-000: RNCC: 3 | RNVC: 2
5400-1-999-000: RNCC: 3 | RNVC: 9
0511PL FIND NO 5: RNCC: 5 | RNVC: 2

18 Nov 2008

3040-01-570-8485
Rigid Connecting Link

015708485
7512-F: RNCC: 3 | RNVC: 2
87736558: RNCC: 5 | RNVC: 2

15 Jan 2009

3040-01-571-5885
Rigid Connecting Link

015715885
17A5736P04: RNCC: 3 | RNVC: 2
17A5736P04: RNCC: 5 | RNVC: 2

10 Feb 2009

3040-01-572-3117
Hydraulic Control Assembly

015723117
3100106: RNCC: 3 | RNVC: 2

6 Mar 2009

3040-01-572-5779
Belt-Chain Tension Adjusting Device

015725779
101339-3: RNCC: 3 | RNVC: 2

16 Mar 2009

3040-01-572-9627
Shouldered Shaft

015729627
751-7072805-A1: RNCC: 3 | RNVC: 2
799-7072841-13: RNCC: 5 | RNVC: 1
H821-0841-13: RNCC: 5 | RNVC: 1
H821-0805-A1: RNCC: 5 | RNVC: 2

1 Apr 2009

3040-01-573-4170
Bevel Gear And Shaft Assembly

015734170
41151-ZY6-000: RNCC: 3 | RNVC: 9

22 Apr 2009

3040-01-572-3736
Pivot Shaft Assembly

015723736
1624443: RNCC: 3 | RNVC: 2
154248: RNCC: 5 | RNVC: 9
124914682: RNCC: D | RNVC: 9

10 Mar 2009

3040-01-575-6365
Control Cam

015756365
DDE R23537090: RNCC: 3 | RNVC: 2

10 Jul 2009

3040-01-576-1898
Rigid Connecting Link

015761898
331224: RNCC: 3 | RNVC: 2

23 Jul 2009

3040-01-575-8459
Linear Actuating Cylinder

015758459
GSS6365UG: RNCC: 3 | RNVC: 2

15 Jul 2009

3040-01-575-8983
Swivel Flange

015758983
174394: RNCC: 3 | RNVC: 2
R0093773: RNCC: 5 | RNVC: 2
R0093773: RNCC: 7 | RNVC: 2
R0093773-0301: RNCC: D | RNVC: 9

16 Jul 2009

3040-01-576-4874
Shouldered Shaft

015764874
1B5097-19: RNCC: 3 | RNVC: 2

3 Aug 2009

3040-01-577-7240
Rigid Connecting Link

015777240
RE529237: RNCC: 3 | RNVC: 2

16 Sep 2009

3040-01-577-4857
Nonaircraft Mechanical Actuator

015774857
12505995: RNCC: 1 | RNVC: 2
MIL-16922-23: RNCC: 3 | RNVC: 2
12505995: RNCC: 5 | RNVC: 2
16906-50: RNCC: 5 | RNVC: 9

9 Sep 2009

3040-01-578-0367
Manual Control Lever

015780367
19-0204-12: RNCC: 3 | RNVC: 2
12239: RNCC: D | RNVC: 9

24 Sep 2009

3040-01-578-1185
Mechanically Actuated Spindle

015781185
124-5563773 PC 2: RNCC: 3 | RNVC: 2

28 Sep 2009

3040-01-578-9311
Controllable Swashplate

015789311
P-29L42176R: RNCC: 3 | RNVC: 2
P-29L42176R: RNCC: 5 | RNVC: 2

26 Oct 2009

3040-01-582-3825
Rigid Connecting Link

015823825
13993: RNCC: 3 | RNVC: 2

18 Feb 2010

3040-01-583-0168
Manual Control Lever

015830168
42675C208-8: RNCC: 3 | RNVC: 2

11 Mar 2010

3040-01-582-3394
Cam Detent

015823394
4977170-2: RNCC: 3 | RNVC: 2
4977170-2: RNCC: 5 | RNVC: 2
4977170-0002: RNCC: 5 | RNVC: 2

17 Feb 2010

3040-01-583-8204
Pivot Shaft Assembly

015838204
22KP129: RNCC: 3 | RNVC: 2
12508453: RNCC: 5 | RNVC: 2
22KP129: RNCC: 5 | RNVC: 9
12508453: RNCC: 5 | RNVC: 9

7 Apr 2010

3040-01-583-8763
Shouldered Shaft

015838763
PD44500PCBC: RNCC: 3 | RNVC: 2

9 Apr 2010

3040-01-583-9472
Ramp Connection Rld Tenon

015839472
891-22455: RNCC: 3 | RNVC: 2

13 Apr 2010

3040-01-585-2205
Male Coupler

015852205
2307625W: RNCC: 3 | RNVC: 2

19 May 2010

3040-01-584-9061
Shaft Retaining Plate

015849061
60244-40936: RNCC: 3 | RNVC: 2

11 May 2010

3040-01-585-2000
Piston Rod Ring

015852000
200413558-01: RNCC: 1 | RNVC: 2
220FTE-160-4567: RNCC: 3 | RNVC: 2

19 May 2010

3040-01-587-3736
Pawl Guide

015873736
19KP738: RNCC: 1 | RNVC: 2
2297U4597: RNCC: 3 | RNVC: 2

4 Aug 2010

3040-01-584-2715
Shouldered Shaft

015842715
214-040-622-109: RNCC: 3 | RNVC: 2

21 Apr 2010

3040-01-585-7956
Shouldered Shaft

015857956
35-79501-2242-3: RNCC: 3 | RNVC: 2

7 Jun 2010

3040-01-588-4167
Shouldered Shaft

015884167
41010938: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-588-2265
Friction Lining

015882265
71750-22203-117: RNCC: 3 | RNVC: 2

8 Sep 2010

3040-01-589-5259
Rigid Connecting Link

015895259
4088863: RNCC: 3 | RNVC: 2
4088863: RNCC: 5 | RNVC: 2

29 Oct 2010

3040-01-590-2406
Straight Shaft

015902406
OXP6X290: RNCC: 3 | RNVC: 2
1SCA022042R6370: RNCC: 5 | RNVC: 1
1SCA022042R6370: RNCC: 5 | RNVC: 2
31L25403: RNCC: 5 | RNVC: 2
P-041605: RNCC: 5 | RNVC: 2
40082550: RNCC: 5 | RNVC: 2
40090833: RNCC: 5 | RNVC: 2
40108110: RNCC: 5 | RNVC: 2
OXP6*290: RNCC: 5 | RNVC: 2
24087-320-0220 PC 1 PN/OXP6X290: RNCC: 5 | RNVC: 2

24 Nov 2010

3040-01-591-1762
Shaft Collar

015911762
R190,706: RNCC: 3 | RNVC: 9
R190,706: RNCC: 5 | RNVC: 2

13 Jan 2011

3040-01-592-7875
Rigid Connecting Link

015927875
3922AS170-3: RNCC: 3 | RNVC: 2

21 Mar 2011

3040-01-594-7484
Shouldered Shaft

015947484
2532996105: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-595-4564
Shouldered Shaft

015954564
GTEET0002: RNCC: 3 | RNVC: 2

27 Apr 2011

3040-01-598-3997
Manual Control Lever

015983997
1116000: RNCC: 3 | RNVC: 2
01116000: RNCC: D | RNVC: 9

28 Jul 2011

3040-01-600-2869
Shaft Collar

016002869
10010549: RNCC: 3 | RNVC: 2
6436K75: RNCC: 5 | RNVC: 2
6436K75: RNCC: 5 | RNVC: 2
6436K750: RNCC: 5 | RNVC: 9

21 Nov 2011

3040-01-600-5347
Linear Actuating Cylinder

016005347
MIL-001-1242: RNCC: 3 | RNVC: 2

7 Dec 2011

3040-01-602-1681
Shaft Collar

016021681
300763-5607-0101: RNCC: 3 | RNVC: 2

27 Jan 2012

3040-01-602-4235
Rigid Connecting Link

016024235
18KP888: RNCC: 3 | RNVC: 2
0238040424-00: RNCC: 5 | RNVC: 2
0238040424-00: RNCC: 5 | RNVC: 9
18KP888: RNCC: 5 | RNVC: 9

31 Jan 2012

3040-01-602-8002
Roller Shaft

016028002
53816: RNCC: 3 | RNVC: 2
23KP945: RNCC: 5 | RNVC: 2
23KP945: RNCC: 5 | RNVC: 9

7 Feb 2012

3040-01-602-8003
Roller Shaft

016028003
53940: RNCC: 3 | RNVC: 2

7 Feb 2012

3040-01-604-3977
Spur Gearshaft

016043977
531807-2: RNCC: 3 | RNVC: 2
531807-2: RNCC: 5 | RNVC: 9

4 Apr 2012

3040-01-604-8503
Rotating Shaft Eye Bracket

016048503
347/20722: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-605-3214
Control Cam

016053214
5000531A: RNCC: 3 | RNVC: 2
DD-HB40: RNCC: 5 | RNVC: 9

18 Apr 2012

3040-01-605-4541
Pivot Shaft Assembly

016054541
347/00140: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-607-0061
Breather

016070061
0704.118: RNCC: 3 | RNVC: 2

29 May 2012

3040-01-607-1096
Piston Ring

016071096
R8506128-SP102: RNCC: 3 | RNVC: 2
R8506128-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-526-5216
Nonrotating Shaft Eye Bracket

015265216
CH47317: RNCC: 3 | RNVC: 2
CH47317: RNCC: 3 | RNVC: 9
47293: RNCC: 5 | RNVC: 9

21 Dec 2004

3040-01-525-5081
Rigid Connecting Link

015255081
3480191: RNCC: 1 | RNVC: 2
90554832: RNCC: 3 | RNVC: 2
3480191: RNCC: 5 | RNVC: 9

12 Nov 2004

3040-01-527-7473
Rigid Connecting Link

015277473
11581494: RNCC: 3 | RNVC: 2

16 Feb 2005

3040-01-529-2470
Pawl

015292470
123LM50032-13: RNCC: 3 | RNVC: 9
123LM50032-13: RNCC: 5 | RNVC: 2
123LM50032-13: RNCC: 5 | RNVC: 2
123LM50032-13: RNCC: 5 | RNVC: 2
123LM50032-13: RNCC: 5 | RNVC: 9
123LM50032-13: RNCC: C | RNVC: 1
123LM50032: RNCC: D | RNVC: 9

11 Apr 2005

3040-01-529-5041
En Actuator Linkage

015295041
17-2-0531-1: RNCC: 3 | RNVC: 2
DYNK-10307: RNCC: 5 | RNVC: 2
DYNK-10307: RNCC: 5 | RNVC: 2

19 Apr 2005

3040-01-529-6767
Linear Actuating Cylinder Piston

015296767
189657A2: RNCC: 3 | RNVC: 2

27 Apr 2005

3040-01-530-9847
Rigid Connecting Link

015309847
123AMM42156-1: RNCC: 3 | RNVC: 2
123AMM42156-1: RNCC: 5 | RNVC: 9
123AMM42156: RNCC: D | RNVC: 9

20 Jun 2005

3040-01-531-3579
Linear Actuating Cylinder Assembly

015313579
04-77039: RNCC: 3 | RNVC: 9
SK-120103: RNCC: 5 | RNVC: 2
YMD-9386: RNCC: 5 | RNVC: 2
YMD-9386: RNCC: 5 | RNVC: 2

6 Jul 2005

3040-01-532-6266
Rigid Connecting Link

015326266
60-2249-6: RNCC: 3 | RNVC: 2

15 Aug 2005

3040-01-534-2953
Rigid Connecting Link

015342953
803-6397269 PC 76 MOD CRES 316: RNCC: 3 | RNVC: 2
803-6397268 PC 102 MOD CRES 316: RNCC: 5 | RNVC: 2

17 Oct 2005

3040-01-536-0909
Shaft Collar

015360909
1C010-2353-0: RNCC: 3 | RNVC: 2

20 Dec 2005

3040-01-535-6414
Manual Control Lever Assembly

015356414
3387693: RNCC: 3 | RNVC: 2
3387693: RNCC: 3 | RNVC: 9
050030008: RNCC: 5 | RNVC: 2

7 Dec 2005

3040-01-538-2108
Shouldered Shaft

015382108
45-888434A 1: RNCC: 3 | RNVC: 2
45-812561A2: RNCC: 5 | RNVC: 2

15 Mar 2006

3040-01-538-9918
Rigid Connecting Link

015389918
4C24012-101B: RNCC: 3 | RNVC: 2

6 Apr 2006

3040-01-539-2839
Rigid Connecting Link

015392839
1627841: RNCC: 3 | RNVC: 2
137440: RNCC: 5 | RNVC: 9
132894: RNCC: D | RNVC: 9

17 Apr 2006

3040-01-540-3731
Remote Control Lever

015403731
0433817: RNCC: 3 | RNVC: 2
0433817: RNCC: 3 | RNVC: 9

17 May 2006

3040-01-540-9562
Straight Shaft

015409562
GTHB-99-17-040-0: RNCC: 3 | RNVC: 2

9 Jun 2006

3040-01-542-4043
Rigid Connecting Link

015424043
12501511: RNCC: 3 | RNVC: 2

3 Aug 2006

3040-01-542-9567
Rigid Connecting Link

015429567
RSC216-46-60D: RNCC: 3 | RNVC: 2
167-7044216 PC 46 MOD: RNCC: 5 | RNVC: 1
167-7044215 PC 53 MOD: RNCC: 5 | RNVC: 1

24 Aug 2006

3040-01-543-6449
Ball Joint

015436449
8702-055-0AA: RNCC: 3 | RNVC: 2

19 Sep 2006

3040-01-543-6682
Ball Joint

015436682
9612-205-00X: RNCC: 3 | RNVC: 2

19 Sep 2006

3040-01-543-7815
Pawl

015437815
B008: RNCC: 3 | RNVC: 2

21 Sep 2006

3040-01-544-0251
Shaft Idler

015440251
HU6H3000IST20-GV: RNCC: 3 | RNVC: 2

28 Sep 2006

3040-01-544-8625
Linear Actuating Cylinder Piston Rod

015448625
590/40696: RNCC: 3 | RNVC: 2

25 Oct 2006

3040-01-547-2676
Shaft Collar

015472676
T001412527: RNCC: 3 | RNVC: 2
T001412527: RNCC: 3 | RNVC: 9
N31002 ITEM NO 25: RNCC: 5 | RNVC: 9

17 Jan 2007

3040-01-547-2682
Manual Control Lever

015472682
029221-2: RNCC: 3 | RNVC: 2

17 Jan 2007

3040-01-547-8149
Aircra Pinion Shaft

015478149
42555-616: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-548-2576
Bevel Gear And Shaft Assembly

015482576
C919-0050: RNCC: 3 | RNVC: 9
919: RNCC: 5 | RNVC: 9

15 Feb 2007

3040-01-548-4244
Mechanical Drive Housing

015484244
1858063C91: RNCC: 3 | RNVC: 2
1841396C1: RNCC: 5 | RNVC: 9

22 Feb 2007

3040-01-548-7205
Rh Knurled Rlr Assy

015487205
F058473: RNCC: 3 | RNVC: 2
F057783 IT 2: RNCC: 5 | RNVC: 2

2 Mar 2007

3040-01-549-2068
Worm Wheel Gearshaft

015492068
CL40FRSBML-C: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-2489
Breather

015492489
NBF-2016: RNCC: 3 | RNVC: 2
185940: RNCC: 5 | RNVC: 2
20809002 FN 50: RNCC: 5 | RNVC: 2

15 Mar 2007

3040-01-549-6151
Remote Control Lever

015496151
RE521050: RNCC: 3 | RNVC: 2
RE521050: RNCC: 5 | RNVC: 9

26 Mar 2007

3040-01-550-6481
Shaft Collar

015506481
412815: RNCC: 3 | RNVC: 2
412815: RNCC: 5 | RNVC: 9

25 Apr 2007

3040-01-550-3441
Linear Actuating Cylinder

015503441
306-9637: RNCC: 3 | RNVC: 2

17 Apr 2007

3040-01-551-2555
Cam Valve

015512555
5405-001: RNCC: 3 | RNVC: 2
9624-0329: RNCC: 5 | RNVC: 2
5HB395: RNCC: 5 | RNVC: 2
5HB395: RNCC: 5 | RNVC: 9

10 May 2007

3040-01-552-0084
Counterbalance Weight

015520084
38150-09424-108: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-551-9360
Control Cable Assembly

015519360
D-WK-871-86 ASSY A: RNCC: 3 | RNVC: 2
F-WK-871-10 PC48: RNCC: 5 | RNVC: 2

31 May 2007

3040-01-552-0083
Counterbalance Weight

015520083
38150-09424-109: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-554-9654
Straight Shaft

015549654
191924: RNCC: 3 | RNVC: 2
20868046: RNCC: 5 | RNVC: 2
20864004 FN17: RNCC: 5 | RNVC: 2

24 Aug 2007

3040-01-555-3813
Shouldered Shaft

015553813
2244418: RNCC: 3 | RNVC: 2

5 Sep 2007

3040-01-555-4501
Rigid Connecting Link

015554501
USCTR-002-119: RNCC: 3 | RNVC: 2
901-301-022-119: RNCC: 3 | RNVC: 2
901-301-023-119: RNCC: E | RNVC: 8

6 Sep 2007

3040-01-555-9336
Rigid Connecting Link

015559336
123C40203-1: RNCC: 3 | RNVC: 2
123C40203-1: RNCC: 3 | RNVC: 9

18 Sep 2007

3040-01-556-7334
Manual Control Lever

015567334
3750AS382-1: RNCC: 3 | RNVC: 2
3221AS652-1: RNCC: 3 | RNVC: 9
3221AS652: RNCC: 5 | RNVC: 9
3750AS382: RNCC: D | RNVC: 9

4 Oct 2007

3040-01-557-5880
Bell Crank

015575880
R0030438: RNCC: 3 | RNVC: 2
R0030438: RNCC: 5 | RNVC: 2
R0030438-0107: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-558-5659
Flexible Drive Shaft

015585659
3758661: RNCC: 3 | RNVC: 2
3758661: RNCC: 5 | RNVC: 9
3555829: RNCC: 5 | RNVC: 9

14 Nov 2007

3040-01-558-7089
Counterbalance Weight

015587089
2116M38P02: RNCC: 3 | RNVC: 2

19 Nov 2007

3040-01-560-1598
Shouldered Shaft

015601598
5405-145-000: RNCC: 3 | RNVC: 2
0509 PL FIND NO 40: RNCC: 5 | RNVC: 2

17 Jan 2008

3040-01-560-3937
Control Cam

015603937
12473307: RNCC: 3 | RNVC: 2

29 Jan 2008

3040-01-561-2646
Linear Actuating Cylinder Assembly

015612646
2935711: RNCC: 3 | RNVC: 2
258-2514: RNCC: 5 | RNVC: 9

28 Feb 2008

3040-01-559-2074
Shouldered Shaft Assembly

015592074
122419: RNCC: 3 | RNVC: 2
2FH340: RNCC: 5 | RNVC: 2
2FH340: RNCC: 5 | RNVC: 9

10 Dec 2007

3040-01-561-5405
Nonrotating Shaft Eye Bracket

015615405
12443636-003: RNCC: 3 | RNVC: 2

10 Mar 2008

3040-01-561-5789
Shouldered Shaft

015615789
00-874635: RNCC: 3 | RNVC: 2

11 Mar 2008

3040-01-563-2536
Linear Actuating Cylinder Assembly

015632536
896500A01: RNCC: 3 | RNVC: 2
896500A01: RNCC: 5 | RNVC: 2
896500A01: RNCC: 5 | RNVC: 2
8M0118141: RNCC: 5 | RNVC: 2

6 May 2008

3040-01-563-2390
Rotary Actuating Cylinder Assembly

015632390
45AB008: RNCC: 3 | RNVC: 2
10024932: RNCC: 5 | RNVC: 2
45AF008: RNCC: 5 | RNVC: 9

6 May 2008

3040-01-563-4900
Straight Shaft

015634900
87011A3200: RNCC: 3 | RNVC: 2
87011A3200: RNCC: 3 | RNVC: 9
87011A3200: RNCC: 5 | RNVC: 2

13 May 2008

3040-01-563-9590
Linear Actuating Cylinder Cap

015639590
03462: RNCC: 3 | RNVC: 2

30 May 2008

3040-01-563-9974
Rigid Connecting Link

015639974
A2-3102-N-3472: RNCC: 3 | RNVC: 2
2597100C91: RNCC: 5 | RNVC: 2
A2310223458: RNCC: 5 | RNVC: 9

2 Jun 2008

3040-01-564-0888
Rigid Connecting Link

015640888
B-090106X14-CR: RNCC: 3 | RNVC: 2
803-6397269 PC 55 MOD: RNCC: 5 | RNVC: 2

4 Jun 2008

3040-01-564-2096
Shoe Type Brake

015642096
3596002: RNCC: 1 | RNVC: 2
K027784: RNCC: 3 | RNVC: 2
331221: RNCC: 5 | RNVC: 9
331221: RNCC: 5 | RNVC: 9
3596002: RNCC: 5 | RNVC: 9

9 Jun 2008

3040-01-564-0356
Nonaircraft Mechanical Actuator

015640356
3683200C91: RNCC: 3 | RNVC: 2
3683200C91L: RNCC: D | RNVC: 9

3 Jun 2008

3040-01-564-4422
Shouldered Shaft Assembly

015644422
158-3416: RNCC: 3 | RNVC: 2
14KP166: RNCC: 5 | RNVC: 2
14KP166: RNCC: 5 | RNVC: 9

17 Jun 2008

3040-01-564-4916
Shouldered Shaft

015644916
112428-1: RNCC: 3 | RNVC: 2

18 Jun 2008

3040-01-564-4001
Counterbalance Weight

015644001
P70072-1C: RNCC: 3 | RNVC: 2
P70071-1C: RNCC: 5 | RNVC: 9

16 Jun 2008

3040-01-564-6375
Housing Adapter

015646375
112484-1: RNCC: 3 | RNVC: 2

23 Jun 2008

3040-01-564-6444
Mechanical Drive Housing Part

015646444
121845: RNCC: 3 | RNVC: 2
1KS281: RNCC: 5 | RNVC: 2
1KS281: RNCC: 5 | RNVC: 9

24 Jun 2008

3040-01-564-6503
Rigid Connecting Link

015646503
14KP514: RNCC: 3 | RNVC: 2
12508466: RNCC: 5 | RNVC: 2
14KP514: RNCC: 5 | RNVC: 9

24 Jun 2008

3040-01-565-5296
Breather

015655296
1214-AA: RNCC: 3 | RNVC: 2

22 Apr 2021

3040-01-565-6402
Pivot Shaft Assembly

015656402
3305AS1249-1: RNCC: 3 | RNVC: 2

31 Jul 2008

3040-01-565-5738
Brake Drum

015655738
1566418: RNCC: 3 | RNVC: 2

30 Jul 2008

3040-01-566-0592
Rigid Connecting Link

015660592
14KP973: RNCC: 3 | RNVC: 2
ML5-22.50: RNCC: 5 | RNVC: 1
ML5-22.50: RNCC: 5 | RNVC: 2
14KP973: RNCC: 5 | RNVC: 9

19 Aug 2008

3040-01-566-1398
Rigid Connecting Link

015661398
LCS2-12033-35S: RNCC: 3 | RNVC: 2
12033-35S: RNCC: 5 | RNVC: 9

21 Aug 2008

3040-01-566-1403
Rigid Connecting Link

015661403
LCS2-12033-35: RNCC: 3 | RNVC: 2
12033-35: RNCC: 5 | RNVC: 9

21 Aug 2008

3040-01-566-3099
Rigid Connecting Link

015663099
87440124: RNCC: 3 | RNVC: 2

27 Aug 2008

3040-01-566-3171
Wheelzassemblyzzzzz

015663171
120660-6: RNCC: 3 | RNVC: 2
38638-1: RNCC: 5 | RNVC: 9
120660-6: RNCC: 5 | RNVC: 9

27 Aug 2008

3040-01-567-0733
Rigid Connecting Link

015670733
3681760C1: RNCC: 3 | RNVC: 2
3681760C1L: RNCC: 5 | RNVC: 9

17 Sep 2008

3040-01-567-1326
Counterbalance Weight

015671326
T237652: RNCC: 3 | RNVC: 2

18 Sep 2008

3040-01-567-3373
Shouldered Shaft

015673373
87533223: RNCC: 3 | RNVC: 2

24 Sep 2008

3040-01-567-8301
Shouldered Shaft

015678301
803-6397269 PC 84 MOD 316 SST: RNCC: 3 | RNVC: 2

8 Oct 2008

3040-01-569-0224
Hydraulic Control Assembly

015690224
1731-999-000: RNCC: 3 | RNVC: 2
0511PL FIND NO 3: RNCC: 5 | RNVC: 2

18 Nov 2008

3040-01-570-0706
Pneumatic Actuator Cylinder Housing

015700706
A203ARM86: RNCC: 3 | RNVC: 2

16 Dec 2008

3040-01-571-3277
Linear Actuating Cylinder Assembly

015713277
1384812: RNCC: 3 | RNVC: 2
R0089588: RNCC: 5 | RNVC: 2
163473: RNCC: 5 | RNVC: 9
DNC-100-250-PPV-A 163473: RNCC: 5 | RNVC: 9
163473: RNCC: 5 | RNVC: 9
1384812: RNCC: 5 | RNVC: 9
R0089588: RNCC: 7 | RNVC: 2
R0089588-0301: RNCC: D | RNVC: 9

30 Jan 2009

3040-01-571-8960
Counterbalance Weight

015718960
064-51451-000: RNCC: 3 | RNVC: 2
364-51227-000 ITEM 36: RNCC: 5 | RNVC: 2

20 Feb 2009

3040-01-571-8900
Bevel Gearshaft

015718900
B411001390: RNCC: 3 | RNVC: 2
A-41631K2: RNCC: 5 | RNVC: 9

20 Feb 2009

3040-01-573-0807
Shaft Collar

015730807
064-46761-000: RNCC: 3 | RNVC: 2
064-46761B: RNCC: 5 | RNVC: 9

7 Apr 2009

3040-01-573-0923
Planetary Gears Carrier

015730923
29545240: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-1069
Counterbalance Weight

015731069
23071999-3: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-1078
Counterbalance Weight

015731078
23071999-6: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-9846
Straight Shaft

015739846
111570001: RNCC: 3 | RNVC: 2
111570001: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-575-5700
Rigid Connecting Link

015755700
A05-27896-000: RNCC: 3 | RNVC: 2

7 Jul 2009

3040-01-575-6367
Control Cam

015756367
DDE R23537091: RNCC: 3 | RNVC: 2

10 Jul 2009

3040-01-575-6026
Transmission Fluid Cooler

015756026
TDC 15448: RNCC: 3 | RNVC: 2

8 Jul 2009

3040-01-575-7663
Rigid Connecting Link

015757663
16-15069-001: RNCC: 3 | RNVC: 2
16-15069: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-576-8664
Manual Control Lever Assembly

015768664
B3437-583: RNCC: 3 | RNVC: 9
B3437-583: RNCC: 5 | RNVC: 2
D50-0019 ITEM 26: RNCC: 5 | RNVC: 2
D50-0019 ITEM 26: RNCC: 5 | RNVC: 9

18 Aug 2009

3040-01-578-1331
Rigid Connecting Link

015781331
351217: RNCC: 3 | RNVC: 2
0351217: RNCC: 5 | RNVC: 2

28 Sep 2009

3040-01-578-9632
Nonaircraft Mechanical Actuator

015789632
6442704-01M1: RNCC: 3 | RNVC: 9
6442704-01M1: RNCC: 5 | RNVC: 2
6442704-01M1: RNCC: C | RNVC: 1

27 Oct 2009

3040-01-579-4868
Rigid Connecting Link

015794868
0351218: RNCC: 3 | RNVC: 2
ZB0351218: RNCC: 5 | RNVC: 2

13 Nov 2009

3040-01-579-8463
Rigid Connecting Link

015798463
12509494: RNCC: 3 | RNVC: 2

25 Nov 2009

3040-01-579-8900
Nonrotating Shaft Eye Bracket

015798900
3606937: RNCC: 3 | RNVC: 2
2333226: RNCC: 5 | RNVC: 9

27 Nov 2009

3040-01-579-9079
Rigid Connecting Link

015799079
12506078: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-580-2025
Flexible Shaft Assembly

015802025
GTC-702-17: RNCC: 3 | RNVC: 2

8 Dec 2009

3040-01-580-5788
Linear Actuating Cylinder Assembly Parts Kit

015805788
RK2HLTS201: RNCC: 3 | RNVC: 2

17 Dec 2009

3040-01-581-1615
Rigid Connecting Link

015811615
74A661153-1001: RNCC: 3 | RNVC: 2

7 Jan 2010

3040-01-581-9032
Rotary Actuating Cylinder Assembly

015819032
35316611: RNCC: 3 | RNVC: 2

1 Feb 2010

3040-01-582-4879
Hub Clamp

015824879
4977220-1: RNCC: 3 | RNVC: 2
4977220-0001: RNCC: 5 | RNVC: 2

23 Feb 2010

3040-01-584-0100
Shaft Collar

015840100
6436K41: RNCC: 3 | RNVC: 2

14 Apr 2010

3040-01-585-4423
Inertia Damper

015854423
RE505939: RNCC: 3 | RNVC: 2

26 May 2010

3040-01-585-6622
Piston Rod Guide

015856622
1003-04-D FIND NO. 19: RNCC: 3 | RNVC: 2
18-006-022: RNCC: 3 | RNVC: 2

2 Jun 2010

3040-01-586-2129
Shouldered Shaft

015862129
30295-1037: RNCC: 3 | RNVC: 2
40001207-01: RNCC: 5 | RNVC: 2
30295-1037: RNCC: 5 | RNVC: 9

18 Jun 2010

3040-01-587-3293
Remote Control Lever

015873293
3837885C1: RNCC: 3 | RNVC: 2
3837885C1L: RNCC: 5 | RNVC: 9

3 Aug 2010

3040-01-588-3183
Shouldered Shaft

015883183
41010959-210: RNCC: 3 | RNVC: 2

13 Sep 2010

3040-01-588-3837
Rigid Connecting Link

015883837
791HN113-1: RNCC: 3 | RNVC: 2

15 Sep 2010

3040-01-588-4183
Shouldered Shaft

015884183
41010959-190: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-587-9279
Axle Vent Line Kit

015879279
3891693C91: RNCC: 3 | RNVC: 2

26 Aug 2010

3040-01-588-5084
Straight Shaft

015885084
5023022-101: RNCC: 3 | RNVC: 2
5023022-101: RNCC: 5 | RNVC: 9
5992015: RNCC: D | RNVC: 9

22 Sep 2010

3040-01-589-4908
Rigid Connecting Link

015894908
3671240C01003-5: RNCC: 3 | RNVC: 2
3671240C01003-5: RNCC: 3 | RNVC: 9

27 Oct 2010

3040-01-589-6374
Rigid Connecting Link

015896374
3902294: RNCC: 3 | RNVC: 2
3902294: RNCC: 5 | RNVC: 9

1 Nov 2010

3040-01-589-4394
Rigid Connecting Link

015894394
4088864: RNCC: 3 | RNVC: 2
4088864: RNCC: 5 | RNVC: 2

26 Oct 2010

3040-01-590-8400
Rigid Connecting Link

015908400
6-51857-10: RNCC: 3 | RNVC: 2

27 Dec 2010

3040-01-592-1345
Nonaircraft Mechanical Actuator

015921345
13046620: RNCC: 3 | RNVC: 2
205620: RNCC: 5 | RNVC: 2

22 Feb 2011

3040-01-593-5529
Flexible Drive Shaft

015935529
177K412G01: RNCC: 3 | RNVC: 2

11 Apr 2011

3040-01-593-2075
Rigid Connecting Link

015932075
1590M22P04: RNCC: 3 | RNVC: 2

5 Apr 2011

3040-01-595-6184
Linear Actuating Cylinder Piston

015956184
1137703: RNCC: 3 | RNVC: 2

3 May 2011

3040-01-596-0691
Helical Gear And Shaft Assembly

015960691
3834665: RNCC: 3 | RNVC: 2
3834665: RNCC: 5 | RNVC: 9

11 May 2011

3040-01-597-1004
Manual Control Lever

015971004
64A114C80-8: RNCC: 3 | RNVC: 2
DVMHULCS FIND #34: RNCC: 5 | RNVC: 2

26 May 2011

3040-01-597-9055
Rigid Connecting Link

015979055
5129T56P01: RNCC: 3 | RNVC: 2

22 Jun 2011

3040-01-598-2049
Housing Adapter

015982049
13046409: RNCC: 3 | RNVC: 2
205409: RNCC: 5 | RNVC: 2

11 Jul 2011

Load More Results