What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 111 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 111 of 300

3040-01-603-7172
Nonaircraft Mechanical Actuator

016037172
2000-40161-33: RNCC: 3 | RNVC: 2

12 Mar 2012

3040-01-602-9919
Belt-Chain Tension Adjusting Device

016029919
38159: RNCC: 3 | RNVC: 2
3895546: RNCC: 5 | RNVC: 2
3895546: RNCC: 7 | RNVC: 9

15 Feb 2012

3040-01-603-9592
Aircraft Guide Nrp

016039592
210781: RNCC: 3 | RNVC: 2

22 Mar 2012

3040-01-604-1771
Helical-Spur Gearshaft

016041771
531806-2: RNCC: 3 | RNVC: 2
531806-2: RNCC: 5 | RNVC: 9
531806-2: RNCC: 5 | RNVC: 9

28 Mar 2012

3040-01-605-0308
Push-Pull Control Assembly

016050308
CCX63306: RNCC: 3 | RNVC: 2
CCX63306: RNCC: 5 | RNVC: 2
CCX63306: RNCC: 5 | RNVC: 2

16 Apr 2012

3040-01-605-0390
Pneumatic Control Assembly

016050390
MTU-H002-CT-APE-00: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-6513
Mechanical Drive Housing

016056513
880686T24: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-608-3416
Shaft Collar

016083416
200945076-3: RNCC: 3 | RNVC: 2

25 Jun 2012

3040-01-527-3401
Rigid Connecting Link

015273401
69-9605-16: RNCC: 3 | RNVC: 2
69-9605: RNCC: D | RNVC: 9

28 Jan 2005

3040-01-527-7472
Rigid Connecting Link

015277472
11581493: RNCC: 3 | RNVC: 2

16 Feb 2005

3040-01-528-2982
Manual Control Lever

015282982
5-17-7707-00: RNCC: 3 | RNVC: 2
NI-087-602-A ITEM 17: RNCC: 5 | RNVC: 2
SA-770 ITEM 17: RNCC: 5 | RNVC: 2

9 Mar 2005

3040-01-528-5393
Rigid Connecting Link

015285393
901-001-930-105: RNCC: 3 | RNVC: 2

17 Mar 2005

3040-01-529-8665
Extension Shaft

015298665
RD-4-6076-0P: RNCC: 3 | RNVC: 2
RD-4-6076-0: RNCC: 5 | RNVC: 9

5 May 2005

3040-01-529-6310
Shouldered Shaft

015296310
21-11: RNCC: 3 | RNVC: 2
21-11: RNCC: 5 | RNVC: 9

25 Apr 2005

3040-01-532-0839
A Emer Toggle Shaft

015320839
B44054-1: RNCC: 3 | RNVC: 2
B44054: RNCC: D | RNVC: 9

28 Jul 2005

3040-01-532-0950
Aircr Support Shaft

015320950
110354-1: RNCC: 3 | RNVC: 2

28 Jul 2005

3040-01-530-2203
Spur Gearshaft

015302203
3949357: RNCC: 3 | RNVC: 2

18 May 2005

3040-01-532-2968
Rigid Connecting Link

015322968
901-301-023-119: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-4813
Flexible Shaft Assembly

015324813
2205329/0: RNCC: 3 | RNVC: 9
2205329/0: RNCC: 5 | RNVC: 2
2205329/0: RNCC: 5 | RNVC: 9
2205329/0: RNCC: 5 | RNVC: 9

10 Aug 2005

3040-01-532-9164
Pivot Shaft Assembly

015329164
65302-12560-109: RNCC: 3 | RNVC: 2
65302-12560-109: RNCC: 5 | RNVC: 2
65302-12560: RNCC: D | RNVC: 9

24 Aug 2005

3040-01-533-1828
Spur Gearshaft

015331828
00-874277: RNCC: 3 | RNVC: 2
F-43069 PG9 PL-56511 P/N 25: RNCC: 5 | RNVC: 2

6 Sep 2005

3040-01-531-0819
Counterbalance Weight

015310819
9127M56P04: RNCC: 3 | RNVC: 2

21 Jun 2005

3040-01-535-0829
Rigid Connecting Link

015350829
106A0208: RNCC: 3 | RNVC: 2

15 Nov 2005

3040-01-537-4183
Rigid Connecting Link

015374183
527-14908-4: RNCC: 3 | RNVC: 2

7 Feb 2006

3040-01-537-3180
Control Cam

015373180
039-048-00: RNCC: 3 | RNVC: 9

2 Feb 2006

3040-01-538-0829
Housing Adapter

015380829
4083195: RNCC: 3 | RNVC: 2
4083195: RNCC: 5 | RNVC: 2
CV187047: RNCC: 5 | RNVC: 2
4083195: RNCC: 5 | RNVC: 2

9 Mar 2006

3040-01-538-4735
Linear Actuating Cylinder Piston Rod

015384735
3-B9623-1: RNCC: 3 | RNVC: 2
B9622-1 ITEM 7: RNCC: 5 | RNVC: 2

23 Mar 2006

3040-01-538-4731
Linear Actuating Cylinder Piston Rod

015384731
3-B9822: RNCC: 3 | RNVC: 2
B9807 ITEM 5: RNCC: 5 | RNVC: 2

23 Mar 2006

3040-01-540-3739
Control Cam

015403739
0338742: RNCC: 3 | RNVC: 9
0338742: RNCC: 5 | RNVC: 2

17 May 2006

3040-01-541-8789
Ball Joint

015418789
007675: RNCC: 3 | RNVC: 2

14 Jul 2006

3040-01-542-2660
Rigid Connecting Link

015422660
1101203: RNCC: 3 | RNVC: 2
1101203: RNCC: 3 | RNVC: 9

27 Jul 2006

3040-01-543-3372
Straight Shaft

015433372
7T6581: RNCC: 3 | RNVC: 2

8 Sep 2006

3040-01-543-3592
Linear Actuating Cylinder Assembly

015433592
306-85-5: RNCC: 3 | RNVC: 2
1001256: RNCC: 5 | RNVC: 1

11 Sep 2006

3040-01-543-6736
Shouldered Shaft

015436736
8978-040-00S: RNCC: 3 | RNVC: 2

19 Sep 2006

3040-01-545-0097
Remote Control Lever

015450097
6289635: RNCC: 3 | RNVC: 2

30 Oct 2006

3040-01-545-0540
Linear Actuating Cylinder Head

015450540
595/10061: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-0797
Rigid Connecting Link

015450797
8728-006-00N: RNCC: 3 | RNVC: 2

1 Nov 2006

3040-01-545-9550
Push-Pull Control Assembly

015459550
CCX63334: RNCC: 3 | RNVC: 2
301947-003-408: RNCC: 5 | RNVC: 9

30 Nov 2006

3040-01-546-4092
Housing Adapter

015464092
158552-51151: RNCC: 3 | RNVC: 2
158552-51151: RNCC: 3 | RNVC: 9

14 Dec 2006

3040-01-546-5044
Body Hub

015465044
12312-999-000: RNCC: 3 | RNVC: 2
12221PL FIND 2 PN 12312-999-000: RNCC: 5 | RNVC: 2
12221: RNCC: D | RNVC: 9

19 Dec 2006

3040-01-548-5467
Crankshaft

015485467
752-7068502-98: RNCC: 3 | RNVC: 2
H832-1684-98: RNCC: 5 | RNVC: 2
H832-1684-89: RNCC: 5 | RNVC: 9
752-7068502-89: RNCC: 5 | RNVC: 9

27 Feb 2007

3040-01-548-6409
Rotary Actuating Cylinder Assembly

015486409
87454016: RNCC: 3 | RNVC: 2
1346190C2: RNCC: 5 | RNVC: 9

28 Feb 2007

3040-01-549-2406
Worm Wheel Gearshaft

015492406
47703M-442-000: RNCC: 3 | RNVC: 2
40201 PL FN29: RNCC: 5 | RNVC: 9
PC47703-442-000: RNCC: 5 | RNVC: 9

15 Mar 2007

3040-01-549-3977
Linear Actuating Cylinder Assembly

015493977
199721A1: RNCC: 3 | RNVC: 2

20 Mar 2007

3040-01-550-0382
Hydraulic Accumulator Bladder

015500382
1352561003: RNCC: 3 | RNVC: 2
BA005X364 IT 2: RNCC: 5 | RNVC: 9
1352561003: RNCC: 5 | RNVC: 9

5 Apr 2007

3040-01-551-9169
Shaft Retaining Plate

015519169
D-WK-871-25 PC13: RNCC: 3 | RNVC: 2
H-WK-871-2 PC13: RNCC: 5 | RNVC: 2

31 May 2007

3040-01-552-9105
Ball Joint

015529105
99520021201: RNCC: 3 | RNVC: 2
99520021201: RNCC: 3 | RNVC: 9
011663-18: RNCC: 5 | RNVC: 9
362253-006: RNCC: 5 | RNVC: 9

28 Jun 2007

3040-01-553-9500
Electrical-Fluid Pressure Connector Assembly

015539500
42487412: RNCC: 3 | RNVC: 2
42487412: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-1779
Rigid Connecting Link

015541779
47059112: RNCC: 3 | RNVC: 2
47059112: RNCC: 5 | RNVC: 9

1 Aug 2007

3040-01-553-9335
Shouldered Shaft

015539335
40099812: RNCC: 3 | RNVC: 2
40099812: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-1782
Rigid Connecting Link

015541782
47066312: RNCC: 3 | RNVC: 2
47066312: RNCC: 5 | RNVC: 9

1 Aug 2007

3040-01-555-0082
Straight Shaft

015550082
42860719-02: RNCC: 3 | RNVC: 2
860101-IPB-ITEM48: RNCC: 5 | RNVC: 2

27 Aug 2007

3040-01-555-8099
Shaft Retaining Plate

015558099
27011612: RNCC: 3 | RNVC: 2
27011612: RNCC: 5 | RNVC: 9

14 Sep 2007

3040-01-556-3591
Rigid Connecting Link

015563591
4286964: RNCC: 3 | RNVC: 2
4286964: RNCC: 5 | RNVC: 2

2 Oct 2007

3040-01-557-6560
Rigid Connecting Link

015576560
R0073178: RNCC: 3 | RNVC: 2
R0073178: RNCC: 5 | RNVC: 2
R0073178-0102: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-558-4427
Rigid Connecting Link

015584427
3666476: RNCC: 3 | RNVC: 2
3666476: RNCC: 5 | RNVC: 9

9 Nov 2007

3040-01-559-8338
Shouldered Shaft

015598338
16211400-15: RNCC: 3 | RNVC: 9
16211400 ITEM 4: RNCC: 5 | RNVC: 1
16211400-15: RNCC: 5 | RNVC: 2

8 Jan 2008

3040-01-560-2377
Rigid Connecting Link

015602377
21C8029P20: RNCC: 3 | RNVC: 2

22 Jan 2008

3040-01-560-7706
Straight Shaft

015607706
188877-2: RNCC: 3 | RNVC: 2

12 Feb 2008

3040-01-560-9215
Straight Shaft

015609215
S1602-1022997 PC NO 18: RNCC: 3 | RNVC: 2

20 Feb 2008

3040-01-561-7387
Control Cam

015617387
42860111-02: RNCC: 3 | RNVC: 2
1PB860601PC14: RNCC: 5 | RNVC: 2
1PB860602PC14: RNCC: 5 | RNVC: 2

17 Mar 2008

3040-01-561-6718
Manual Release Kit

015616718
893420A01: RNCC: 3 | RNVC: 2
893420A01: RNCC: 5 | RNVC: 2

13 Mar 2008

3040-01-562-0209
Shaft Collar

015620209
3693627: RNCC: 3 | RNVC: 2
3693627: RNCC: 5 | RNVC: 9

26 Mar 2008

3040-01-562-1279
Rigid Connecting Link

015621279
BS000466: RNCC: 3 | RNVC: 2

31 Mar 2008

3040-01-562-1614
Straight Shaft

015621614
3616296-2: RNCC: 3 | RNVC: 2

1 Apr 2008

3040-01-562-5691
Rigid Connecting Link

015625691
74A661329-1005: RNCC: 3 | RNVC: 2

10 Apr 2008

3040-01-562-9347
Shouldered Shaft

015629347
3305AS1189-1: RNCC: 3 | RNVC: 2

25 Apr 2008

3040-01-563-2160
Linear Actuating Cylinder Piston Rod

015632160
25093870: RNCC: 3 | RNVC: 2
84AX333: RNCC: 5 | RNVC: 9

6 May 2008

3040-01-563-4409
Rigid Connecting Link

015634409
6031744: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-563-4385
Linear Actuating Cylinder Piston

015634385
8242895: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-564-0299
Rod Assy - Hydraulic Lock

015640299
3683197C91: RNCC: 3 | RNVC: 2
3683197C91L: RNCC: 5 | RNVC: 9

3 Jun 2008

3040-01-564-0936
Rigid Connecting Link

015640936
803-6397268 PC 193: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-564-2313
Control Cam

015642313
16874-63A-75: RNCC: 3 | RNVC: 2

10 Jun 2008

3040-01-564-6627
Rigid Connecting Link

015646627
803-6397268 PC 163: RNCC: 3 | RNVC: 2
803-6397268: RNCC: D | RNVC: 9

24 Jun 2008

3040-01-564-7911
Vehicular Components Bracket

015647911
3685168C1: RNCC: 3 | RNVC: 2
3685168C1L: RNCC: 5 | RNVC: 9

27 Jun 2008

3040-01-565-0352
Straight Shaft

015650352
25-45-0001: RNCC: 3 | RNVC: 9
25-45-0001: RNCC: 5 | RNVC: 2

9 Jul 2008

3040-01-566-3666
Mechanical Drive Housing

015663666
4504482: RNCC: 3 | RNVC: 2

28 Aug 2008

3040-01-566-4949
Spur Gearshaft

015664949
T294884: RNCC: 3 | RNVC: 2
T173843: RNCC: 5 | RNVC: 9

3 Sep 2008

3040-01-566-5575
Counterbalance Weight

015665575
AT343431: RNCC: 3 | RNVC: 2

4 Sep 2008

3040-01-566-9698
Motor Shaft Assy Wi

015669698
0505-RR8-003: RNCC: 3 | RNVC: 2

15 Sep 2008

3040-01-566-8331
Rigid Connecting Link

015668331
TV080034: RNCC: 3 | RNVC: 2
TV080034: RNCC: 5 | RNVC: 2

11 Sep 2008

3040-01-567-5835
Linear Actuating Cylinder

015675835
CA20147303: RNCC: 3 | RNVC: 2
3776616: RNCC: 5 | RNVC: 2
3588351: RNCC: 5 | RNVC: 9
3776616: RNCC: 7 | RNVC: 9

1 Oct 2008

3040-01-568-2009
Linear Actuating Cylinder Assembly

015682009
304-11.54: RNCC: 3 | RNVC: 2
3001166: RNCC: 5 | RNVC: 2

23 Oct 2008

3040-01-568-0150
Flexible Drive Shaft

015680150
120HD-HC: RNCC: 3 | RNVC: 2

16 Oct 2008

3040-01-568-4019
Linear Actuating Cylinder

015684019
12505561: RNCC: 3 | RNVC: 2

29 Oct 2008

3040-01-569-2844
Shouldered Shaft

015692844
3505-21028-40: RNCC: 3 | RNVC: 2

25 Nov 2008

3040-01-570-4440
Detent Plate

015704440
50C-0014-0290: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-570-6659
Body Hub

015706659
A9-333-A-4317: RNCC: 3 | RNVC: 2

8 Jan 2009

3040-01-571-9068
Shouldered Shaft

015719068
3392AS766: RNCC: 3 | RNVC: 2

20 Feb 2009

3040-01-572-7063
Mechanical Drive Housing

015727063
13015640: RNCC: 3 | RNVC: 2

20 Mar 2009

3040-01-573-3839
Spur Gearshaft

015733839
41131-ZY6-000: RNCC: 3 | RNVC: 9

21 Apr 2009

3040-01-573-7815
Helical Gearshaft

015737815
532257-1: RNCC: 3 | RNVC: 2
532257-1: RNCC: 5 | RNVC: 9
532257: RNCC: D | RNVC: 9

5 May 2009

3040-01-573-3976
Breather

015733976
N260H001-IT9A: RNCC: 3 | RNVC: 2
DC2: RNCC: 5 | RNVC: 9

21 Apr 2009

3040-01-573-9911
Shouldered Shaft

015739911
111956001: RNCC: 3 | RNVC: 2
111956001: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-574-5546
Linear Actuating Cylinder Assembly

015745546
2087642: RNCC: 3 | RNVC: 2
2087642: RNCC: 5 | RNVC: 2

1 Jun 2009

3040-01-574-5820
Differential Gear Unit

015745820
139245: RNCC: 3 | RNVC: 9
6292E21-ITEM23: RNCC: 5 | RNVC: 2

2 Jun 2009

3040-01-575-6424
Tension Spring Assembly

015756424
07-09485-000: RNCC: 3 | RNVC: 2

10 Jul 2009

3040-01-575-7667
Rigid Connecting Link

015757667
18-51378-000: RNCC: 3 | RNVC: 2
16-51378: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-575-7725
Rigid Connecting Link

015757725
A16-18930-000: RNCC: 3 | RNVC: 2
A16-18930: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-577-4985
Mechanical Drive Housing

015774985
3817499: RNCC: 3 | RNVC: 2
3817499: RNCC: 5 | RNVC: 9

9 Sep 2009

3040-01-577-9842
Shaft Idler

015779842
R0097744: RNCC: 3 | RNVC: 2
R0097744: RNCC: 5 | RNVC: 2
R0097744-0102: RNCC: D | RNVC: 9

23 Sep 2009

3040-01-577-3669
Ball Joint

015773669
3831461: RNCC: 3 | RNVC: 2
3831461: RNCC: 5 | RNVC: 9

3 Sep 2009

3040-01-581-6665
Push-Pull Control Assembly

015816665
6620466-1: RNCC: 3 | RNVC: 2
10340170: RNCC: 6 | RNVC: 9

25 Jan 2010

3040-01-581-8446
Manual Control Lever

015818446
0350592: RNCC: 3 | RNVC: 2

29 Jan 2010

3040-01-582-8245
Hub Clamp

015828245
S3600Y-C125: RNCC: 3 | RNVC: 2

9 Mar 2010

3040-01-583-5653
Tension Spring Assembly

015835653
951-41V-0008-00: RNCC: 3 | RNVC: 2

30 Mar 2010

3040-01-582-4449
Straight Shaft

015824449
3807704: RNCC: 3 | RNVC: 2
3807704: RNCC: 5 | RNVC: 9

22 Feb 2010

3040-01-584-5124
Linear Actuating Cylinder

015845124
0974301: RNCC: 3 | RNVC: 2

28 Apr 2010

3040-01-584-5575
Ball Joint

015845575
63215K39: RNCC: 3 | RNVC: 2

29 Apr 2010

3040-01-584-6889
Rigid Connecting Link

015846889
450-060-912-101: RNCC: 3 | RNVC: 2

4 May 2010

3040-01-584-9705
Offset Clevis

015849705
03002A5091: RNCC: 3 | RNVC: 2

12 May 2010

3040-01-585-2510
Planetary Gears Carrier

015852510
29502046: RNCC: 3 | RNVC: 2

20 May 2010

3040-01-585-0459
Rigid Connecting Link

015850459
6448994-01M1: RNCC: 3 | RNVC: 2
6448994-01M1: RNCC: 3 | RNVC: 9
6448994-01M1: RNCC: 5 | RNVC: 2

13 May 2010

3040-01-585-6796
Spur Gearshaft

015856796
3955150: RNCC: 3 | RNVC: 2
4934418: RNCC: 5 | RNVC: 9

3 Jun 2010

3040-01-586-2121
Straight Shaft

015862121
30295-1083: RNCC: 3 | RNVC: 2
40001268-01: RNCC: 5 | RNVC: 2
30295-1083: RNCC: 5 | RNVC: 9

18 Jun 2010

3040-01-586-8956
Ball Joint

015868956
3950-6: RNCC: 3 | RNVC: 2

19 Jul 2010

3040-01-588-3068
Rigid Connecting Link

015883068
107147: RNCC: 3 | RNVC: 2

13 Sep 2010

3040-01-588-4188
Shouldered Shaft

015884188
41010959-200: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-588-4192
Shouldered Shaft

015884192
41010959-185: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-588-6743
Brake Shoe Set

015886743
95SK341: RNCC: 3 | RNVC: 2
95SK341: RNCC: 5 | RNVC: 9

29 Sep 2010

3040-01-591-0666
Manual Control Lever

015910666
4604594: RNCC: 3 | RNVC: 2
2090110: RNCC: 5 | RNVC: 2
4604594: RNCC: 5 | RNVC: 2
4604694: RNCC: 5 | RNVC: 9

10 Jan 2011

3040-01-592-5229
Rigid Connecting Link

015925229
3922AS168-1: RNCC: 3 | RNVC: 2

9 Mar 2011

3040-01-593-2879
Pivot Shaft Assembly

015932879
771846: RNCC: 3 | RNVC: 2

6 Apr 2011

3040-01-593-9495
Shouldered Shaft

015939495
3927430: RNCC: 3 | RNVC: 2
3927430: RNCC: 5 | RNVC: 9

22 Apr 2011

3040-01-595-6023
Remote Control Lever

015956023
5250841: RNCC: 3 | RNVC: 2

3 May 2011

3040-01-595-7171
Mechanical Drive Housing

015957171
A-3201-L-9294: RNCC: 3 | RNVC: 2

5 May 2011

3040-01-596-5584
Shouldered Shaft

015965584
471B-23: RNCC: 3 | RNVC: 2

19 May 2011

3040-01-597-1155
Shaft Idler

015971155
SYLC-1674: RNCC: 3 | RNVC: 2

27 May 2011

3040-01-598-0309
Straight Shaft

015980309
OXS6X180: RNCC: 3 | RNVC: 2
40071582: RNCC: 5 | RNVC: 2

28 Jun 2011

3040-01-601-0942
Shouldered Shaft

016010942
52720818: RNCC: 3 | RNVC: 2
4253623: RNCC: 5 | RNVC: 2
24KP267: RNCC: 5 | RNVC: 2
24KP267: RNCC: 5 | RNVC: 9
4253623: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-602-3268
Control Cable Assembly

016023268
09-2805393-1: RNCC: 3 | RNVC: 2

28 Jan 2012

3040-01-604-5909
Upper Tilt Shaft

016045909
99625003: RNCC: 3 | RNVC: 2

9 Apr 2012

3040-01-604-7722
Shaft Idler

016047722
14555-ZY3-003: RNCC: 3 | RNVC: 9

13 Apr 2012

3040-01-605-4376
Rigid Connecting Link

016054376
65070-20123-041: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-8928
Shaft Retaining Plate

016058928
804AS204: RNCC: 1 | RNVC: 2
DVBCM-015: RNCC: 3 | RNVC: 2

30 Apr 2012

3040-01-605-1158
Nonaircraft Mechanical Actuator

016051158
8M0124413: RNCC: 3 | RNVC: 2
864289A03: RNCC: 5 | RNVC: 9
8M0048114: RNCC: 5 | RNVC: 9

16 Apr 2012

3040-01-606-7343
Nonaircraft Mechanical Actuator

016067343
ED3UW: RNCC: 3 | RNVC: 2

23 May 2012

3040-01-606-8758
Shouldered Shaft Assembly

016068758
123L40010-601: RNCC: 3 | RNVC: 2
123L40010-601: RNCC: 5 | RNVC: 9

25 May 2012

3040-01-607-3165
Flexible Shaft Assembly

016073165
2ABE12007: RNCC: 3 | RNVC: 2
2ABE12007: RNCC: 3 | RNVC: 9

8 Jun 2012

3040-01-531-5706
Rigid Connecting Link

015315706
12479391: RNCC: 3 | RNVC: 2

14 Jul 2005

3040-01-531-6787
Shaft Collar

015316787
111685: RNCC: 3 | RNVC: 2

19 Jul 2005

3040-01-530-6845
Shaft Collar

015306845
7550138-6: RNCC: 3 | RNVC: 2
7550079-31: RNCC: 5 | RNVC: 1
G545-4102-31: RNCC: 5 | RNVC: 1
G545-4105-6: RNCC: 5 | RNVC: 2
7550138-6: RNCC: 5 | RNVC: 2

8 Jun 2005

3040-01-532-1883
Rigid Connecting Link

015321883
000993-153-1: RNCC: 3 | RNVC: 2
000993-153: RNCC: D | RNVC: 9

1 Aug 2005

3040-01-532-6092
Linear Actuating Cylinder Assembly

015326092
828-006-745: RNCC: 3 | RNVC: 2
540-047/255: RNCC: 5 | RNVC: 9
9404-074: RNCC: 5 | RNVC: 9

15 Aug 2005

3040-01-535-6537
Bell Crank Support

015356537
12469671: RNCC: 3 | RNVC: 2

7 Dec 2005

3040-01-537-3165
Remote Control Lever

015373165
047-019-00: RNCC: 3 | RNVC: 9

2 Feb 2006

3040-01-557-6497
Metallic Pipe

015576497
AH39-1 50X25-02: RNCC: 3 | RNVC: 2
R0084297: RNCC: 5 | RNVC: 2
R0084297: RNCC: 5 | RNVC: 9
R0084297: RNCC: 7 | RNVC: 2
R0084297-0301: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-570-4480
Rigid Connecting Link

015704480
N9535: RNCC: 3 | RNVC: 2
22KP949: RNCC: 5 | RNVC: 1

31 Dec 2008

3040-01-579-0391
Linear Actuating Cylinder Assembly Parts Kit

015790391
1031576: RNCC: 3 | RNVC: 2
V013347: RNCC: 3 | RNVC: 9

28 Oct 2009

3040-01-607-0025
Linear Actuating Cylinder Assembly

016070025
333/E3473: RNCC: 3 | RNVC: 2
347/00512: RNCC: 5 | RNVC: 9

29 May 2012

3040-01-528-1703
Nonaircraft Mechanical Actuator

015281703
APC30210: RNCC: 3 | RNVC: 2
APC30210: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-528-6520
Bearing Press Assembly Driver Shaft

015286520
7001126: RNCC: 3 | RNVC: 2

21 Mar 2005

3040-01-528-7660
Rigid Connecting Link

015287660
6-39387-21: RNCC: 3 | RNVC: 2
6-39387: RNCC: D | RNVC: 9

24 Mar 2005

3040-01-529-1517
Rigid Connecting Link

015291517
HPB450-3: RNCC: 3 | RNVC: 2

6 Apr 2005

3040-01-530-7688
Hev Gear

015307688
1000958: RNCC: 3 | RNVC: 2

10 Jun 2005

3040-01-530-6830
Straight Shaft

015306830
7550138-3: RNCC: 3 | RNVC: 2
7550079-21: RNCC: 5 | RNVC: 1
G545-4102-21: RNCC: 5 | RNVC: 1
G545-4105-3: RNCC: 5 | RNVC: 2
7550138-3: RNCC: 5 | RNVC: 2

8 Jun 2005

3040-01-530-8587
Ball Joint

015308587
RAM-101: RNCC: 3 | RNVC: 2
5031T61: RNCC: 5 | RNVC: 2
13022338: RNCC: 7 | RNVC: 2

14 Jun 2005

3040-01-531-0818
Counterbalance Weight

015310818
9127M56P03: RNCC: 3 | RNVC: 2

21 Jun 2005

3040-01-530-9873
Linear Actuating Cylinder Assembly

015309873
D-WK-861-7 PC6: RNCC: 3 | RNVC: 2
D-WK-861-13: RNCC: 5 | RNVC: 2

20 Jun 2005

3040-01-531-5216
Rigid Connecting Link

015315216
12489288: RNCC: 3 | RNVC: 2

13 Jul 2005

3040-01-532-0704
Control Cam

015320704
113339-1: RNCC: 3 | RNVC: 2

27 Jul 2005

3040-01-532-1452
Rigid Connecting Link

015321452
123CSM11818-1: RNCC: 3 | RNVC: 2
123CSM11818-1: RNCC: 5 | RNVC: 2
123CSM11818-1: RNCC: 5 | RNVC: 9
123CSM11818-1: RNCC: 5 | RNVC: 9
123CSM11818-1: RNCC: 5 | RNVC: 9
123CSM1818: RNCC: D | RNVC: 9

29 Jul 2005

3040-01-532-1500
Latch Spring

015321500
054-00286: RNCC: 3 | RNVC: 2

29 Jul 2005

3040-01-532-6572
Piston Rod Guide

015326572
131221CF: RNCC: 3 | RNVC: 2
PLC-13124 PC 2: RNCC: 5 | RNVC: 2

16 Aug 2005

3040-01-535-0443
Rigid Connecting Link

015350443
3468AS1106-2: RNCC: 3 | RNVC: 2
3468AS1106-2: RNCC: 5 | RNVC: 9

14 Nov 2005

3040-01-535-1884
Mechanically Actuated Spindle

015351884
803-6397269 REV A PC 122: RNCC: 3 | RNVC: 2

18 Nov 2005

3040-01-537-8674
Shouldered Shaft

015378674
HM025-704-1: RNCC: 3 | RNVC: 2

28 Feb 2006

3040-01-537-9859
Control Cam

015379859
202221-1P: RNCC: 3 | RNVC: 2
202221-1: RNCC: 3 | RNVC: 9

7 Mar 2006

3040-01-538-6216
Bell Crank Support

015386216
68A610052-1001: RNCC: 3 | RNVC: 2

28 Mar 2006

3040-01-539-6330
Shouldered Shaft

015396330
029562-3: RNCC: 3 | RNVC: 2

27 Apr 2006

3040-01-540-2427
Shouldered Shaft

015402427
12441889: RNCC: 3 | RNVC: 2

12 May 2006

3040-01-540-3484
Linear Actuating Cylinder Assembly

015403484
5005114: RNCC: 3 | RNVC: 9
5005114: RNCC: 5 | RNVC: 2

16 May 2006

3040-01-540-3746
Control Cam

015403746
0335592: RNCC: 3 | RNVC: 9
0335592: RNCC: C | RNVC: 1

17 May 2006

3040-01-541-4748
Detent Plate

015414748
29915-01E: RNCC: 3 | RNVC: 2
205101 ITEM 17: RNCC: 5 | RNVC: 2

28 Jun 2006

3040-01-541-5739
Linear Actuating Cylinder Cap

015415739
1078901: RNCC: 3 | RNVC: 2

30 Jun 2006

3040-01-539-9438
Ball Joint Head

015399438
MT10-1128: RNCC: 3 | RNVC: 2
3001945: RNCC: 5 | RNVC: 2

4 May 2006

3040-01-544-3366
Manual Control Lever Assembly

015443366
0501 211 287: RNCC: 3 | RNVC: 2
04/801301: RNCC: 5 | RNVC: 2

11 Oct 2006

3040-01-545-5530
Linear Actuating Cylinder Assembly

015455530
347/21008: RNCC: 3 | RNVC: 2

16 Nov 2006

3040-01-545-7658
Shouldered Shaft

015457658
7360-001: RNCC: 3 | RNVC: 2
158-3529-001 ITEM 9: RNCC: 5 | RNVC: 2

27 Nov 2006

3040-01-546-9404
Brake Shoe Set

015469404
554H-31A-410C: RNCC: 3 | RNVC: 2
554H-31A-410C: RNCC: 3 | RNVC: 2

9 Jan 2007

3040-01-547-1823
Remote Control Lever

015471823
D124528: RNCC: 3 | RNVC: 2

12 Jan 2007

3040-01-548-1324
Straight Shaft

015481324
104414: RNCC: 3 | RNVC: 2

9 Feb 2007

3040-01-548-2474
Pawl

015482474
226398-01: RNCC: 3 | RNVC: 2

15 Feb 2007

3040-01-548-6078
Hrm Idler Hub

015486078
HU6H3000IDT-PT: RNCC: 3 | RNVC: 2

28 Feb 2007

3040-01-548-5599
Shouldered Shaft

015485599
12446204: RNCC: 3 | RNVC: 2

27 Feb 2007

3040-01-548-7230
Push-Pull Control Assembly

015487230
TYPE 98, 3" STROKE: RNCC: 3 | RNVC: 2
F057783 IT 53: RNCC: 5 | RNVC: 2
F059848: RNCC: 5 | RNVC: 2

2 Mar 2007

3040-01-548-7815
Rigid Connecting Link

015487815
122974A1: RNCC: 3 | RNVC: 2

5 Mar 2007

3040-01-549-2422
Shouldered Shaft

015492422
PB52579-151-000: RNCC: 3 | RNVC: 2
40210 PL FN4: RNCC: 5 | RNVC: 2

15 Mar 2007

3040-01-550-5885
Linear Actuating Cylinder

015505885
412915: RNCC: 3 | RNVC: 2
412915: RNCC: 5 | RNVC: 9

24 Apr 2007

3040-01-550-6494
Linear Actuating Cylinder

015506494
295-6951: RNCC: 3 | RNVC: 2
230-3695: RNCC: 5 | RNVC: 9

25 Apr 2007

3040-01-551-1318
Rigid Connecting Link

015511318
2006A1010: RNCC: 3 | RNVC: 2

8 May 2007

3040-01-551-4646
Worm Shaft

015514646
1994-247: RNCC: 3 | RNVC: 2
1994-247-00: RNCC: D | RNVC: 9

17 May 2007

3040-01-551-9173
Shouldered Shaft

015519173
D-WK-871-29 PC12: RNCC: 3 | RNVC: 2
H-WK-871-3 PC12: RNCC: 5 | RNVC: 1

31 May 2007

3040-01-552-8090
Shouldered Shaft

015528090
3-P-1049X: RNCC: 3 | RNVC: 2
3699472: RNCC: 5 | RNVC: 2
3-P-831: RNCC: 5 | RNVC: 9
3699472: RNCC: 5 | RNVC: 9

25 Jun 2007

3040-01-552-6971
Straight Shaft

015526971
300034-2: RNCC: 3 | RNVC: 2
300034-2: RNCC: 3 | RNVC: 9
300184 R10 FIND NO. 4: RNCC: 5 | RNVC: 9
300184 R10 FIND NO. 4: RNCC: C | RNVC: 1

21 Jun 2007

3040-01-553-6276
Adaption Kit

015536276
41736312: RNCC: 3 | RNVC: 2
41736312: RNCC: 5 | RNVC: 9

20 Jul 2007

3040-01-553-8377
Linear Actuating Cylinder

015538377
16211602-2: RNCC: 3 | RNVC: 2
16211602-2: RNCC: 3 | RNVC: 9
16211600 PC23: RNCC: 5 | RNVC: 9
16211600 PC23: RNCC: C | RNVC: 1

26 Jul 2007

3040-01-553-9031
Linear Actuating Cylinder

015539031
19571612: RNCC: 3 | RNVC: 2
19571612: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-2607
Mechanical Drive Housing Part

015542607
29537009: RNCC: 3 | RNVC: 2

3 Aug 2007

3040-01-552-0087
Counterbalance Weight

015520087
38150-09424-103: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-555-6824
Shouldered Shaft Assembly

015556824
191925: RNCC: 3 | RNVC: 2
20864047: RNCC: 5 | RNVC: 2
20864004 FN2: RNCC: 5 | RNVC: 2
20864004: RNCC: D | RNVC: 9

11 Sep 2007

3040-01-555-9083
Rigid Connecting Link

015559083
21C14800P16: RNCC: 3 | RNVC: 2
21C14800P16: RNCC: 5 | RNVC: 2

18 Sep 2007

3040-01-556-4189
Shouldered Shaft

015564189
4286883: RNCC: 3 | RNVC: 2
4286883: RNCC: 5 | RNVC: 2

2 Oct 2007

3040-01-556-4550
Spur Gearshaft

015564550
KIT2318: RNCC: 3 | RNVC: 2
1653986C91: RNCC: 5 | RNVC: 2

3 Oct 2007

3040-01-556-5257
Shouldered Shaft

015565257
2504889C91: RNCC: 3 | RNVC: 2

3 Oct 2007

3040-01-557-5423
Bell Crank

015575423
R0075797: RNCC: 3 | RNVC: 2
R0075797: RNCC: 5 | RNVC: 2
R0075797-0107: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-557-6427
Extension Shaft

015576427
R0070824: RNCC: 3 | RNVC: 2
BRI 0015: RNCC: 5 | RNVC: 2
R0070824: RNCC: 5 | RNVC: 2
PH175: RNCC: 5 | RNVC: 2
R0070824-0301: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-558-6805
Counterbalance Weight

015586805
2116M38P03: RNCC: 3 | RNVC: 2

19 Nov 2007

3040-01-558-3895
Straight Shaft

015583895
4F19311-103A: RNCC: 3 | RNVC: 2

7 Nov 2007

3040-01-560-8088
Helical Gear And Shaft Assembly

015608088
5397-6: RNCC: 3 | RNVC: 2

13 Feb 2008

3040-01-561-1428
Shaft Retaining Plate

015611428
F1XWH6-10.5: RNCC: 3 | RNVC: 2
F1XWH-10.5: RNCC: 5 | RNVC: 9
F1XWH6-10.5: RNCC: 5 | RNVC: 9
1497-N47: RNCC: 5 | RNVC: 9

26 Feb 2008

3040-01-561-7099
Shouldered Shaft

015617099
19755T 7: RNCC: 3 | RNVC: 2
19755T 7: RNCC: 5 | RNVC: 2

14 Mar 2008

3040-01-563-1328
Rigid Connecting Link

015631328
414S1716-1: RNCC: 3 | RNVC: 2

2 May 2008

3040-01-563-6172
Rigid Connecting Link

015636172
11E422050: RNCC: 3 | RNVC: 2
RIA149122: RNCC: 5 | RNVC: 9

15 May 2008

3040-01-563-8604
Straight Shaft

015638604
5286984: RNCC: 3 | RNVC: 2
3102618: RNCC: 5 | RNVC: 9
4920497: RNCC: 5 | RNVC: 9

27 May 2008

3040-01-563-9217
Rigid Connecting Link

015639217
803-6397268 PC 191: RNCC: 3 | RNVC: 2

29 May 2008

3040-01-564-0263
Rigid Connecting Link

015640263
B-090106X16-HASB: RNCC: 3 | RNVC: 2

3 Jun 2008

3040-01-564-1994
Spline Adapter

015641994
9661M85P10: RNCC: 3 | RNVC: 2
9661M85P08: RNCC: 5 | RNVC: 9

9 Jun 2008

3040-01-564-8733
Control Cam

015648733
16874-63B-75: RNCC: 3 | RNVC: 2

1 Jul 2008

3040-01-565-4601
Linear Actuating Cylinder Assembly

015654601
MIL-001-446: RNCC: 3 | RNVC: 2

25 Jul 2008

3040-01-565-9740
Rigid Connecting Link

015659740
3730875: RNCC: 3 | RNVC: 2
3711381: RNCC: 5 | RNVC: 9
3730875: RNCC: 5 | RNVC: 9

14 Aug 2008

3040-01-566-1399
Rigid Connecting Link

015661399
LCS2-13533-24S: RNCC: 3 | RNVC: 2
13533-24S: RNCC: 5 | RNVC: 9

21 Aug 2008

3040-01-566-3938
Piston Rod Ring

015663938
H155770: RNCC: 3 | RNVC: 2

29 Aug 2008

3040-01-566-6786
Rigid Connecting Link

015666786
859D10097-1: RNCC: 3 | RNVC: 2
859D10097-1: RNCC: 5 | RNVC: 9

8 Sep 2008

3040-01-567-1475
Rigid Connecting Link

015671475
3683116C93: RNCC: 3 | RNVC: 2
3683116C92L: RNCC: 5 | RNVC: 9
3683116C92: RNCC: D | RNVC: 9

18 Sep 2008

3040-01-567-4947
Handles Left Shaft Assembly

015674947
22KP141: RNCC: 3 | RNVC: 2
12508497: RNCC: 5 | RNVC: 2
22KP141: RNCC: 5 | RNVC: 9

29 Sep 2008

3040-01-567-7451
Rigid Connecting Link

015677451
1410385: RNCC: 3 | RNVC: 2
TV080033: RNCC: 3 | RNVC: 9
TV080033: RNCC: 5 | RNVC: 9

6 Oct 2008

3040-01-567-8614
Shouldered Shaft

015678614
803-6397269 PC 85 MOD 316 SST: RNCC: 3 | RNVC: 2

9 Oct 2008

3040-01-568-3154
Linear Actuating Cylinder

015683154
TT-002: RNCC: 3 | RNVC: 9
TT-003: RNCC: 5 | RNVC: 9
TT-003: RNCC: C | RNVC: 1

27 Oct 2008

3040-01-568-6542
Nonaircraft Mechanical Actuator

015686542
33307-40425-10: RNCC: 3 | RNVC: 2

4 Nov 2008

3040-01-568-6575
Rigid Connecting Link

015686575
803-6397269 ASSY G-2: RNCC: 3 | RNVC: 2
803-6397268 PC195: RNCC: 5 | RNVC: 2

5 Nov 2008

3040-01-569-6044
Breather

015696044
41060-02-SV: RNCC: 3 | RNVC: 2

4 Dec 2008

3040-01-570-0322
Shouldered Shaft

015700322
1401-21020-33: RNCC: 3 | RNVC: 2

15 Dec 2008

3040-01-570-3701
Push-Pull Control Assembly

015703701
317302-03-138.0: RNCC: 3 | RNVC: 2
315058-3500: RNCC: 5 | RNVC: 2
315058-3500: RNCC: 5 | RNVC: 9

24 Dec 2008

3040-01-570-4421
Mechanical Drive Housing

015704421
29538345: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-572-9237
Shouldered Shaft

015729237
YZ4102930: RNCC: 3 | RNVC: 2
YZ4101422: RNCC: 5 | RNVC: 9

31 Mar 2009

3040-01-572-7912
Rigid Connecting Link

015727912
9-55623-2: RNCC: 3 | RNVC: 2

25 Mar 2009

3040-01-573-9880
Linear Actuating Cylinder Assembly

015739880
1H000040757: RNCC: 3 | RNVC: 2
BB278667AA: RNCC: 5 | RNVC: 9
BB278667A0: RNCC: 5 | RNVC: 9

12 May 2009

3040-01-575-3021
Manual Control Lever

015753021
DN60-3-24B: RNCC: 3 | RNVC: 2
DN60-3-24B: RNCC: 3 | RNVC: 9
D50-0016 ITEM 28: RNCC: 5 | RNVC: 2
D50-0016 ITEM 28: RNCC: 5 | RNVC: 9

26 Jun 2009

3040-01-575-3898
Rigid Connecting Link

015753898
347/11088: RNCC: 3 | RNVC: 2

30 Jun 2009

3040-01-575-7646
Rigid Connecting Link

015757646
WWS 50285-3402: RNCC: 3 | RNVC: 2

14 Jul 2009

3040-01-575-7084
Rigid Connecting Link

015757084
WWS 50287-3402: RNCC: 3 | RNVC: 2
50287-3402: RNCC: D | RNVC: 9

13 Jul 2009

3040-01-576-2720
Manual Control Lever

015762720
5005238: RNCC: 3 | RNVC: 2

27 Jul 2009

3040-01-576-6803
Straight Shaft

015766803
204-65535-1: RNCC: 3 | RNVC: 2

11 Aug 2009

3040-01-578-3155
Rigid Connecting Link

015783155
4002911: RNCC: 3 | RNVC: 2
52685-440: RNCC: 5 | RNVC: 2

1 Oct 2009

3040-01-578-3163
Rigid Connecting Link

015783163
4002910: RNCC: 3 | RNVC: 2
52683-440: RNCC: 5 | RNVC: 2

1 Oct 2009

3040-01-578-9040
Straight Shaft

015789040
N7086: RNCC: 3 | RNVC: 2

23 Oct 2009

3040-01-578-9640
Rigid Connecting Link

015789640
6443356-01M1: RNCC: 3 | RNVC: 2
6443356-01M1: RNCC: 3 | RNVC: 9
6443356-01M1: RNCC: 5 | RNVC: 2

27 Oct 2009

3040-01-579-8471
Shouldered Shaft

015798471
12509347: RNCC: 3 | RNVC: 2

25 Nov 2009

3040-01-580-2552
Flexible Shaft Assembly

015802552
212-070-493-107: RNCC: 3 | RNVC: 2

9 Dec 2009

3040-01-583-2688
Shouldered Shaft

015832688
M27780010: RNCC: 3 | RNVC: 2
M27780010: RNCC: 3 | RNVC: 9
A31170060 ITEM 25: RNCC: 5 | RNVC: 9

22 Mar 2010

3040-01-583-6693
Linear Actuating Cylinder

015836693
UC128OBF-2P: RNCC: 3 | RNVC: 2
UC128P-OBF2: RNCC: 5 | RNVC: 9

1 Apr 2010

3040-01-583-0786
Body Hub

015830786
10667587-001: RNCC: 3 | RNVC: 9
10667587-001: RNCC: 5 | RNVC: 2

15 Mar 2010

3040-01-589-9563
Pawl

015899563
6445727-01M1: RNCC: 3 | RNVC: 2
6445727-01M1: RNCC: 3 | RNVC: 2
6445727-01M1: RNCC: 3 | RNVC: 9
6445727-01M1: RNCC: 5 | RNVC: 2
6445727: RNCC: D | RNVC: 9

9 Nov 2010

3040-01-589-6359
Rigid Connecting Link

015896359
3896565: RNCC: 3 | RNVC: 2
3896565: RNCC: 5 | RNVC: 9

1 Nov 2010

3040-01-589-6372
Shaft Collar

015896372
6436K15: RNCC: 3 | RNVC: 2
3902138: RNCC: 5 | RNVC: 9
3902138: RNCC: 7 | RNVC: 2

1 Nov 2010

3040-01-591-7314
Mechanical Drive Housing

015917314
3180738-6: RNCC: 3 | RNVC: 2

7 Feb 2011

3040-01-592-6753
Mechanical Drive Housing

015926753
865440H66: RNCC: 3 | RNVC: 2

15 Mar 2011

3040-01-592-4796
Shouldered Shaft

015924796
6408-S3-1-5: RNCC: 3 | RNVC: 2

8 Mar 2011

3040-01-593-8580
Counterbalance Weight

015938580
771830: RNCC: 3 | RNVC: 2

20 Apr 2011

3040-01-595-4570
Shouldered Shaft

015954570
GTEET0006: RNCC: 3 | RNVC: 2

27 Apr 2011

3040-01-596-0732
Manual Control Lever Assembly

015960732
PST: RNCC: 3 | RNVC: 2

11 May 2011

3040-01-595-9543
Shouldered Shaft

015959543
8464-1514-00: RNCC: 3 | RNVC: 9
8464-1514-00: RNCC: C | RNVC: 1
DD-8464-1514-00: RNCC: D | RNVC: 9

9 May 2011

3040-01-596-4908
Control Cam

015964908
SYLC-1670: RNCC: 3 | RNVC: 2

18 May 2011

3040-01-597-3422
Cap Clevis Cylinder

015973422
A203ARM82: RNCC: 3 | RNVC: 2

7 Jun 2011

3040-01-598-1213
Shouldered Shaft

015981213
SYLC-1899: RNCC: 3 | RNVC: 2

30 Jun 2011

3040-01-598-9015
Shouldered Shaft

015989015
980256: RNCC: 3 | RNVC: 2

31 Aug 2011

3040-01-602-4935
Parts Kit

016024935
3651382: RNCC: 3 | RNVC: 2

31 Jan 2012

3040-01-602-5336
Camshaft Parts Kit

016025336
K71-101-00: RNCC: 3 | RNVC: 9
DXK71-101-00: RNCC: 5 | RNVC: 2

31 Jan 2012

3040-01-603-1729
Multiple Gears Gearshaft

016031729
1717372: RNCC: 3 | RNVC: 2

23 Feb 2012

3040-01-604-7879
Linear Actuating Cylinder Assembly Parts Kit

016047879
AH161591: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-605-1791
Breather

016051791
129045: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-4849
Piston Rod Guide

016054849
DSB90597-11161-15: RNCC: 3 | RNVC: 2
DSB90597-11161PC15: RNCC: 5 | RNVC: 2
156526: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-606-7577
Flexible Casing End Fitting

016067577
2ABV12006: RNCC: 3 | RNVC: 2
2ABV12006: RNCC: 3 | RNVC: 9

23 May 2012

3040-01-608-4867
Buffer Sheave Ram

016084867
3491AS0741-1: RNCC: 3 | RNVC: 2
3491AS0741-1: RNCC: 5 | RNVC: 2

28 Jun 2012

3040-01-527-5865
Shouldered Shaft

015275865
14366: RNCC: 3 | RNVC: 2

9 Feb 2005

3040-01-528-1597
Straight Shaft

015281597
APC30225: RNCC: 3 | RNVC: 2
APC30225: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-528-3683
Shouldered Shaft

015283683
AT-LG-500-320: RNCC: 3 | RNVC: 2

10 Mar 2005

3040-01-528-4853
Housing Adapter

015284853
6033520: RNCC: 3 | RNVC: 2

15 Mar 2005

3040-01-531-6537
Rigid Connecting Link

015316537
12479392: RNCC: 3 | RNVC: 2

18 Jul 2005

3040-01-531-9895
Pawl

015319895
0106822-00: RNCC: 3 | RNVC: 2
0106822-00: RNCC: 3 | RNVC: 9
0106822-00: RNCC: 5 | RNVC: 2

25 Jul 2005

3040-01-531-5086
Bell Crank

015315086
107550: RNCC: 3 | RNVC: 2

13 Jul 2005

3040-01-532-2948
Rigid Connecting Link

015322948
901-301-022-117: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-2954
Rigid Connecting Link

015322954
901-301-022-131: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-534-6215
Linear Actuating Cylinder Assembly

015346215
11450023-9: RNCC: 3 | RNVC: 2

27 Oct 2005

3040-01-534-6459
Bell Crank

015346459
803-6397269 PC 69 MOD CRES 316: RNCC: 3 | RNVC: 2
803-6397268 PC 95 MOD CRES 316: RNCC: 5 | RNVC: 2

28 Oct 2005

3040-01-532-5239
Bell Crank

015325239
5-67388-13: RNCC: 3 | RNVC: 2
5-67388-13: RNCC: 5 | RNVC: 2
5-67388-11: RNCC: 5 | RNVC: 9

11 Aug 2005

3040-01-537-3160
Remote Control Lever

015373160
047-020-00: RNCC: 3 | RNVC: 9

2 Feb 2006

3040-01-538-0215
Nonaircraft Mechanical Actuator

015380215
D-BK: RNCC: 3 | RNVC: 9

8 Mar 2006

3040-01-538-8529
Linear Actuating Cylinder Piston Rod

015388529
F-WK-871-4 PC 85: RNCC: 3 | RNVC: 2

3 Apr 2006

3040-01-538-7611
Rigid Connecting Link

015387611
74A671213-2006: RNCC: 3 | RNVC: 2

30 Mar 2006

3040-01-539-1525
Housing Adapter

015391525
12221/5-999-000: RNCC: 3 | RNVC: 2
12274PL FIND3 PN 12221/5-999-000: RNCC: D | RNVC: 9
12274: RNCC: D | RNVC: 9

12 Apr 2006

3040-01-538-8666
Manual Control Lever

015388666
382-812-030-401-026: RNCC: 3 | RNVC: 2

3 Apr 2006

3040-01-539-3916
Transmission Sleeve

015393916
F-WK-871-4 PC 105: RNCC: 3 | RNVC: 2
F-WK-871-4: RNCC: D | RNVC: 9

20 Apr 2006

3040-01-540-0287
Straight Shaft

015400287
167-6404600 FIND 34: RNCC: 3 | RNVC: 2
DF 1502-249-0034: RNCC: 5 | RNVC: 2
211017197: RNCC: 5 | RNVC: 9

8 May 2006

3040-01-539-9362
Linear Actuating Cylinder Assembly Parts Kit

015399362
AH164325: RNCC: 3 | RNVC: 2
AH164325: RNCC: 5 | RNVC: 2
AH164325: RNCC: 5 | RNVC: 2
AH164325: RNCC: 5 | RNVC: 9
AH164325: RNCC: 5 | RNVC: 9

4 May 2006

3040-01-541-1922
Multiple Gears Gearshaft

015411922
9904105288: RNCC: 3 | RNVC: 2

19 Jun 2006

3040-01-541-2820
Door Latch Linkage

015412820
2004A944: RNCC: 3 | RNVC: 2
2004A944-1: RNCC: 5 | RNVC: 2

22 Jun 2006

3040-01-543-3691
Linear Actuating Cylinder Piston

015433691
306-85-23: RNCC: 3 | RNVC: 2
1000917: RNCC: 5 | RNVC: 1

11 Sep 2006

3040-01-540-0411
Breather

015400411
9237270559: RNCC: 3 | RNVC: 2
923727.0559: RNCC: 5 | RNVC: 2
CV187124: RNCC: 5 | RNVC: 2
923727.0559: RNCC: 5 | RNVC: 2

8 May 2006

3040-01-542-1990
Spline Adapter

015421990
4502102: RNCC: 3 | RNVC: 2

26 Jul 2006

3040-01-545-0208
Ball Joint

015450208
8702-055-00V: RNCC: 3 | RNVC: 2

30 Oct 2006

3040-01-545-0450
Linear Actuating Cylinder Piston Rod

015450450
590/40154: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-0468
Linear Actuating Cylinder Piston Rod

015450468
590/40253: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-8362
Rigid Connecting Link

015458362
200622257-10: RNCC: 3 | RNVC: 2
200622257-10: RNCC: 3 | RNVC: 2

28 Nov 2006

3040-01-546-1816
Linear Actuating Cylinder Assembly Parts Kit

015461816
112842: RNCC: 3 | RNVC: 2

8 Dec 2006

3040-01-545-5868
Straight Shaft

015455868
209675: RNCC: 3 | RNVC: 2

17 Nov 2006

3040-01-545-6723
Mechanical Drive Housing

015456723
596-7409758-A8: RNCC: 3 | RNVC: 2
B831-8000-5: RNCC: 5 | RNVC: 1
596-7409757-5: RNCC: 5 | RNVC: 1
B831-8100-A8: RNCC: 5 | RNVC: 2

21 Nov 2006

3040-01-547-0559
Socket Handle

015470559
B26648: RNCC: 3 | RNVC: 2

11 Jan 2007

3040-01-547-4162
Manual Control Lever

015474162
279261A2: RNCC: 3 | RNVC: 2
367977A1: RNCC: 3 | RNVC: 9

19 Jan 2007

3040-01-547-3604
Control Cam

015473604
26032004916: RNCC: 3 | RNVC: 2
26032004916: RNCC: 3 | RNVC: 9
S9233-XX-MMA-010/LCS SH7-57 #303: RNCC: 5 | RNVC: 2

18 Jan 2007

3040-01-547-5788
Shouldered Shaft

015475788
1800-08150: RNCC: 3 | RNVC: 2
1800-08150: RNCC: 3 | RNVC: 9

25 Jan 2007

3040-01-547-4941
Shouldered Shaft

015474941
16222024-1: RNCC: 3 | RNVC: 2
16221000 FIND NO.10: RNCC: 5 | RNVC: 9
16222024-1: RNCC: 5 | RNVC: 9
16221000 FIND NO.10: RNCC: C | RNVC: 1

23 Jan 2007

3040-01-547-7101
Remote Control Lever

015477101
71749: RNCC: 3 | RNVC: 2
73977: RNCC: 3 | RNVC: 9

30 Jan 2007

3040-01-548-5658
Rigid Connecting Link

015485658
16231200: RNCC: 3 | RNVC: 2
16231000 FIND NO.4: RNCC: 5 | RNVC: 9
16231200: RNCC: 5 | RNVC: 9

27 Feb 2007

3040-01-548-7346
Bell Crank

015487346
176311A1: RNCC: 3 | RNVC: 2

2 Mar 2007

3040-01-549-1983
Worm Wheel Gearshaft

015491983
CL40MRSBML-A: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-551-1321
Rigid Connecting Link

015511321
2006A1011: RNCC: 3 | RNVC: 2

8 May 2007

3040-01-551-1324
Rigid Connecting Link

015511324
2006A1012: RNCC: 3 | RNVC: 2

8 May 2007

3040-01-551-4640
Control Cam

015514640
S25735: RNCC: 3 | RNVC: 2
18944 ITEM 104: RNCC: 5 | RNVC: 2

17 May 2007

3040-01-551-5074
Worm Shaft

015515074
1994-246: RNCC: 3 | RNVC: 2
5KP992: RNCC: 5 | RNVC: 2
5KP992: RNCC: 5 | RNVC: 9

18 May 2007

3040-01-551-6168
Nonrotating Shaft Eye Bracket

015516168
TYUW13558A: RNCC: 3 | RNVC: 2
8H-A32075: RNCC: D | RNVC: 9

22 May 2007

3040-01-552-1120
Breather

015521120
5216: RNCC: 3 | RNVC: 2
D-WK-471-56 PC4: RNCC: 5 | RNVC: 2
5216: RNCC: 5 | RNVC: 9

6 Jun 2007

3040-01-552-7076
Linear Actuating Cylinder Piston

015527076
2001902: RNCC: 3 | RNVC: 2
2B4106900: RNCC: 5 | RNVC: 2

21 Jun 2007

3040-01-553-8289
Key

015538289
45201512: RNCC: 3 | RNVC: 2
45201512: RNCC: 5 | RNVC: 9

26 Jul 2007

3040-01-553-9004
Linear Actuating Cylinder Assembly

015539004
19550412: RNCC: 3 | RNVC: 9
19550412: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-2386
Rigid Connecting Link

015542386
123AM42010-3: RNCC: 3 | RNVC: 2
123AM42010-3: RNCC: 5 | RNVC: 9
123AM42010-3: RNCC: 5 | RNVC: 9

2 Aug 2007

3040-01-554-3978
Transmission Planetary Carrier Assembly Parts Kit

015543978
29531096: RNCC: 3 | RNVC: 2

8 Aug 2007

3040-01-555-4498
Rigid Connecting Link

015554498
USCTR-001-107: RNCC: 3 | RNVC: 2
901-301-022-107: RNCC: 7 | RNVC: 2

6 Sep 2007

3040-01-559-0403
Rigid Connecting Link

015590403
A60200058: RNCC: 3 | RNVC: 2

4 Dec 2007

3040-01-558-7244
Shouldered Shaft

015587244
21C14067P11: RNCC: 3 | RNVC: 2
21C14067P11: RNCC: 5 | RNVC: 2
21C14067: RNCC: D | RNVC: 9

20 Nov 2007

3040-01-559-6103
Linear Actuating Cylinder Assembly

015596103
A203ARR56: RNCC: 3 | RNVC: 2

26 Dec 2007

3040-01-559-3476
Shouldered Shaft

015593476
SM-B-801628: RNCC: 3 | RNVC: 2

13 Dec 2007

3040-01-560-1176
Shouldered Shaft

015601176
5614-151-000: RNCC: 3 | RNVC: 2
0509 PL FIND NO 35: RNCC: 5 | RNVC: 2
5614-1-151-000: RNCC: 5 | RNVC: 9

16 Jan 2008

3040-01-560-7165
Straight Shaft

015607165
7417585: RNCC: 3 | RNVC: 2

11 Feb 2008

3040-01-560-7678
Shouldered Shaft

015607678
189048-2: RNCC: 3 | RNVC: 2

12 Feb 2008

3040-01-562-0978
Linear Actuating Cylinder Assembly Parts Kit

015620978
3J15809: RNCC: 3 | RNVC: 2

28 Mar 2008

3040-01-562-9340
Shouldered Shaft

015629340
3305AS1120-1: RNCC: 3 | RNVC: 2

25 Apr 2008

3040-01-563-1353
Mechanical Drive Housing

015631353
196-100-041: RNCC: 3 | RNVC: 2

2 May 2008

3040-01-563-4472
Body Hub

015634472
8242881-2: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-563-9214
Bell Crank

015639214
803-6397268 PC 159: RNCC: 3 | RNVC: 2

29 May 2008

3040-01-563-8472
Sleeve Lock Handle

015638472
3643592: RNCC: 3 | RNVC: 2
3643592: RNCC: 5 | RNVC: 9

27 May 2008

3040-01-564-0284
Rigid Connecting Link

015640284
B-090106X16-HIST: RNCC: 3 | RNVC: 2
803-6397269 PC 15 MOD: RNCC: 5 | RNVC: 2

3 Jun 2008

3040-01-564-0463
Nonaircraft Mechanical Actuator

015640463
3113721C91: RNCC: 3 | RNVC: 2
3113721C91L: RNCC: 5 | RNVC: 9

3 Jun 2008

3040-01-564-2365
Planetary Gears Carrier

015642365
6603/1M-999-000: RNCC: 3 | RNVC: 2
6603/1-999-000: RNCC: 3 | RNVC: 9
6600 PL FN 2 P/N 6603-1-999-000: RNCC: 5 | RNVC: 2

10 Jun 2008

3040-01-564-3297
Counterbalance Weight

015643297
P70072-2C: RNCC: 3 | RNVC: 2
P70072-2C: RNCC: 5 | RNVC: 9

12 Jun 2008

3040-01-564-2564
Straight Shaft

015642564
6606-999-000: RNCC: 3 | RNVC: 2
7906 PL FN 11: RNCC: 5 | RNVC: 2
6606-188-000: RNCC: 5 | RNVC: 9

10 Jun 2008

3040-01-564-5282
Shouldered Shaft Assembly

015645282
151-5966: RNCC: 3 | RNVC: 2
14KP161: RNCC: 5 | RNVC: 2
14KP161: RNCC: 5 | RNVC: 9

19 Jun 2008

3040-01-564-6496
Breather

015646496
40-55-0001: RNCC: 3 | RNVC: 9
40-55-0001: RNCC: 5 | RNVC: 2

24 Jun 2008

3040-01-564-7878
Rotating Shaft Eye Bracket

015647878
22KP124: RNCC: 3 | RNVC: 2
12508447: RNCC: 5 | RNVC: 2
22KP124: RNCC: 5 | RNVC: 9

27 Jun 2008

3040-01-564-6626
Manual Control Lever

015646626
22KP131: RNCC: 3 | RNVC: 2
12508458: RNCC: 5 | RNVC: 2
22KP131: RNCC: 5 | RNVC: 9

24 Jun 2008

3040-01-565-1221
Shoe Type Brake

015651221
3854812: RNCC: 3 | RNVC: 2
3854812: RNCC: 5 | RNVC: 9
K045528: RNCC: 5 | RNVC: 9
K045528: RNCC: 5 | RNVC: 9

14 Jul 2008

3040-01-565-9124
Shouldered Shaft

015659124
157D4015: RNCC: 3 | RNVC: 2

12 Aug 2008

3040-01-565-9025
Shouldered Shaft Assembly

015659025
IM-LCS1-113: RNCC: 3 | RNVC: 2

12 Aug 2008

3040-01-566-2558
Rigid Connecting Link

015662558
3713940: RNCC: 3 | RNVC: 2
3713940: RNCC: 3 | RNVC: 9

26 Aug 2008

3040-01-566-5605
Linear Actuating Cylinder

015665605
3261-A-1067: RNCC: 3 | RNVC: 2
1696245C91: RNCC: 5 | RNVC: 2

4 Sep 2008

3040-01-566-0594
Rigid Connecting Link

015660594
14KP974: RNCC: 3 | RNVC: 2
ML9-11.38: RNCC: 5 | RNVC: 2
ML9-11.38: RNCC: 5 | RNVC: 2
14KP974: RNCC: 5 | RNVC: 9

19 Aug 2008

3040-01-566-6896
Housing Adapter

015666896
003014-53: RNCC: 3 | RNVC: 2
3633136: RNCC: 5 | RNVC: 2
3633136: RNCC: 7 | RNVC: 9

8 Sep 2008

3040-01-567-1215
Cylinder Support

015671215
3683190C91: RNCC: 3 | RNVC: 2
3683190C91L: RNCC: 5 | RNVC: 9

18 Sep 2008

3040-01-567-1220
Cylinder Support

015671220
3683188C91: RNCC: 3 | RNVC: 2
3683188C91L: RNCC: 5 | RNVC: 9

18 Sep 2008

3040-01-566-8242
Linear Actuating Cylinder Assembly

015668242
MIL-001-067: RNCC: 3 | RNVC: 2

11 Sep 2008

3040-01-567-3382
Shouldered Shaft

015673382
87659406: RNCC: 3 | RNVC: 2

24 Sep 2008

3040-01-567-5287
Tension Spring Assembly

015675287
R505543: RNCC: 3 | RNVC: 2

30 Sep 2008

3040-01-567-6711
Ball Joint

015676711
T99520021801: RNCC: 3 | RNVC: 2
T99520021801: RNCC: 3 | RNVC: 9

2 Oct 2008

3040-01-568-4481
Shaft Collar

015684481
MHSH-R12U: RNCC: 3 | RNVC: 2
MHSH-R12R: RNCC: 3 | RNVC: 9
12422433-001: RNCC: 5 | RNVC: 9
12422433: RNCC: 7 | RNVC: 2

30 Oct 2008

3040-01-568-4535
Spur Gearshaft

015684535
4632-999-000: RNCC: 3 | RNVC: 2
4632-1-029-000: RNCC: 5 | RNVC: 9
4600PL FIND NO 3: RNCC: 5 | RNVC: 9

30 Oct 2008

3040-01-568-4811
Spur Gearshaft

015684811
4530-029-000: RNCC: 3 | RNVC: 2
4600PL FIND NO 9: RNCC: 5 | RNVC: 2

31 Oct 2008

3040-01-568-6208
Fan Drive Mounting

015686208
999536: RNCC: 3 | RNVC: 2
HOR4062600S: RNCC: 5 | RNVC: 9
HOR4062600S: RNCC: 5 | RNVC: 9

4 Nov 2008

3040-01-568-1415
Rigid Connecting Link

015681415
74A410683-1003: RNCC: 3 | RNVC: 2
74A410683-1003: RNCC: 5 | RNVC: 2
74A410683-1003: RNCC: 5 | RNVC: 2
74A410683-1003: RNCC: 5 | RNVC: 2
10369404: RNCC: 6 | RNVC: 9

21 Oct 2008

3040-01-569-3038
Linear Actuating Cylinder Cap

015693038
13017509: RNCC: 3 | RNVC: 2

25 Nov 2008

3040-01-569-9341
Counterbalance Weight

015699341
4821501: RNCC: 3 | RNVC: 2

11 Dec 2008

3040-01-570-4253
Door Actuator

015704253
APC30210-001: RNCC: 3 | RNVC: 2
APC30210-001: RNCC: 5 | RNVC: 2

30 Dec 2008

3040-01-570-6542
Rigid Connecting Link

015706542
CB-9-BR3902: RNCC: 3 | RNVC: 2
BR3902: RNCC: 3 | RNVC: 9
12503750: RNCC: D | RNVC: 9

8 Jan 2009

3040-01-571-1019
Rigid Connecting Link

015711019
65C18551-521: RNCC: 3 | RNVC: 2
65C18551-521: RNCC: 5 | RNVC: 2
65C18551-521: RNCC: 5 | RNVC: 9
65C18551-521: RNCC: 5 | RNVC: 9

23 Jan 2009

3040-01-571-0145
Straight Shaft

015710145
R0069335: RNCC: 3 | RNVC: 2
R0069335: RNCC: 5 | RNVC: 2
R0069335-0102: RNCC: D | RNVC: 9

22 Jan 2009

3040-01-572-2227
Pm Pinion Gear

015722227
48283: RNCC: 3 | RNVC: 2

4 Mar 2009

3040-01-572-9639
Shaft Collar

015729639
754-7286268-A1: RNCC: 3 | RNVC: 2
H553-1506-A1: RNCC: 5 | RNVC: 2

1 Apr 2009

3040-01-573-1072
Counterbalance Weight

015731072
23071999-7: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-572-7365
Linear Actuating Cylinder Piston Rod

015727365
8M0125869: RNCC: 3 | RNVC: 2
647-822373A09: RNCC: 5 | RNVC: 9

24 Mar 2009

3040-01-574-3572
Straight Shaft

015743572
8166323: RNCC: 3 | RNVC: 2

27 May 2009

3040-01-573-9787
Straight Shaft

015739787
563-7070228-43: RNCC: 3 | RNVC: 2
H696-1604-43: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-573-8836
Shouldered Shaft

015738836
22KP935: RNCC: 1 | RNVC: 2
N7187: RNCC: 3 | RNVC: 2

7 May 2009

3040-01-573-7466
Control Cable Assembly

015737466
60180-ZY6-003: RNCC: 3 | RNVC: 9

4 May 2009

3040-01-575-3118
Worm Shaft

015753118
5405-2-145-000: RNCC: 3 | RNVC: 2
5400PL FIND NO 21/5400-3-999-000: RNCC: 5 | RNVC: 2

26 Jun 2009

3040-01-575-5765
Linear Actuating Cylinder Assembly

015755765
3.25BC4MA2US14AX6.000: RNCC: 3 | RNVC: 2

8 Jul 2009

3040-01-575-5978
Treadle Cover

015755978
WIL 131386: RNCC: 3 | RNVC: 2

8 Jul 2009

3040-01-575-6356
Control Cam

015756356
DDE R23532937: RNCC: 3 | RNVC: 2
DDE 23532937: RNCC: 3 | RNVC: 9
23532937: RNCC: D | RNVC: 9

10 Jul 2009

3040-01-575-5757
Nonaircraft Mechanical Actuator

015755757
MIL-16925-R-23: RNCC: 3 | RNVC: 2
16906-58R: RNCC: 3 | RNVC: 9
12505996-002: RNCC: 7 | RNVC: 2

8 Jul 2009

3040-01-576-1914
Rigid Connecting Link

015761914
350622: RNCC: 3 | RNVC: 2
ZB0350622: RNCC: 5 | RNVC: 2

23 Jul 2009

3040-01-576-2718
Manual Control Lever

015762718
5006419: RNCC: 3 | RNVC: 2

27 Jul 2009

3040-01-576-2716
Control Cam

015762716
5005239: RNCC: 3 | RNVC: 2

27 Jul 2009

3040-01-578-9567
Body Hub

015789567
6578689: RNCC: 3 | RNVC: 2

26 Oct 2009

3040-01-579-8395
Shouldered Shaft

015798395
246-3130: RNCC: 3 | RNVC: 2
14KP886: RNCC: 5 | RNVC: 2

24 Nov 2009

3040-01-579-8915
Manual Control Lever

015798915
3563608: RNCC: 3 | RNVC: 2
3085204: RNCC: 3 | RNVC: 9

27 Nov 2009

3040-01-581-2046
Hydraulic Accumulator

015812046
24-49643: RNCC: 3 | RNVC: 1
21-19878 FIND NO 12: RNCC: 5 | RNVC: 1
21-19878 FIND NO 12CP: RNCC: 5 | RNVC: 2
24-49643CP: RNCC: 5 | RNVC: 2

8 Jan 2010

3040-01-581-6739
Push-Pull Control Assembly

015816739
6620465-1: RNCC: 3 | RNVC: 2
10340086: RNCC: 6 | RNVC: 9

25 Jan 2010

3040-01-581-8480
Rotary Actuating Cylinder Assembly

015818480
1310 0345 82: RNCC: 3 | RNVC: 2

29 Jan 2010

3040-01-581-9081
Shouldered Shaft

015819081
0351179: RNCC: 3 | RNVC: 2

1 Feb 2010

3040-01-583-2619
Linear Actuating Cylinder

015832619
MVG75-1088: RNCC: 3 | RNVC: 2
22KP408: RNCC: 5 | RNVC: 1

22 Mar 2010

3040-01-583-7420
Shouldered Shaft

015837420
24530: RNCC: 3 | RNVC: 2
24530: RNCC: 5 | RNVC: 1

5 Apr 2010

3040-01-584-4511
Remote Control Lever

015844511
3792628C1: RNCC: 3 | RNVC: 2
69081-026: RNCC: C | RNVC: 1

27 Apr 2010

3040-01-584-4186
Controllable Swashplate

015844186
2050565: RNCC: 3 | RNVC: 2

26 Apr 2010

3040-01-585-1091
Cylinder Support

015851091
4369619: RNCC: 3 | RNVC: 2

17 May 2010

3040-01-588-3446
Shouldered Shaft

015883446
41010959-180: RNCC: 3 | RNVC: 2

14 Sep 2010

3040-01-590-4747
Rigid Connecting Link

015904747
6-51857-15: RNCC: 3 | RNVC: 2

7 Dec 2010

3040-01-588-7400
Rigid Connecting Link

015887400
6445639-01M1: RNCC: 3 | RNVC: 2
6445639-01M1: RNCC: 3 | RNVC: 2
6445639-01M1: RNCC: 3 | RNVC: 9
6445639-01M1: RNCC: 5 | RNVC: 2
6445639: RNCC: D | RNVC: 9

30 Sep 2010

3040-01-589-2530
Nonaircraft Mechanical Actuator

015892530
D24-21B5-06-402: RNCC: 3 | RNVC: 2
R0102857: RNCC: 5 | RNVC: 2
R0102857: RNCC: 7 | RNVC: 2
R0102857-0301: RNCC: D | RNVC: 9

22 Oct 2010

3040-01-591-7312
Mechanical Drive Housing

015917312
3180738-4: RNCC: 3 | RNVC: 2

7 Feb 2011

3040-01-592-6979
Rigid Connecting Link

015926979
879150A34: RNCC: 3 | RNVC: 2

16 Mar 2011

3040-01-592-6865
Spline Adapter

015926865
T00200-5083: RNCC: 3 | RNVC: 2
T00200-5083: RNCC: 3 | RNVC: 9

16 Mar 2011

3040-01-592-7341
Pull Out Piston

015927341
1J0366: RNCC: 3 | RNVC: 2

17 Mar 2011

3040-01-595-5783
Linear Actuating Cylinder Assembly

015955783
11-718: RNCC: 3 | RNVC: 2

2 May 2011

3040-01-595-7551
Linear Actuating Cylinder Assembly

015957551
CR75-6: RNCC: 3 | RNVC: 2

5 May 2011

3040-01-595-5791
Rigid Connecting Link

015955791
30-383: RNCC: 3 | RNVC: 2

2 May 2011

3040-01-596-1415
Control Cam

015961415
SYLC-2223: RNCC: 3 | RNVC: 2

12 May 2011

3040-01-595-9261
Straight Shaft

015959261
123908: RNCC: 3 | RNVC: 2
E-4737 REV A ITEM NO. 77: RNCC: 5 | RNVC: 2

6 May 2011

3040-01-597-1594
Linear Actuating Cylinder Assembly

015971594
1137701G: RNCC: 3 | RNVC: 2

31 May 2011

3040-01-596-4510
Mechanical Drive Housing

015964510
SYLC-1678: RNCC: 3 | RNVC: 2

17 May 2011

3040-01-597-2544
Mechanical Drive Housing

015972544
SYLC-1679: RNCC: 3 | RNVC: 2

3 Jun 2011

3040-01-597-5006
Rigid Connecting Link

015975006
0700-12712-40: RNCC: 3 | RNVC: 2

10 Jun 2011

3040-01-600-7233
Spline Adapter

016007233
03E-95413: RNCC: 3 | RNVC: 2

15 Dec 2011

3040-01-601-0938
Shouldered Shaft

016010938
52721044: RNCC: 3 | RNVC: 2
24KP274: RNCC: 5 | RNVC: 2
24KP274: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-7030
Flexible Drive Shaft

016017030
M365520027S: RNCC: 3 | RNVC: 2
28KP810: RNCC: 5 | RNVC: 2
M3655200275: RNCC: 5 | RNVC: 9
28KP810: RNCC: 5 | RNVC: 9

19 Jan 2012

3040-01-602-3147
Control Cam

016023147
42315-181: RNCC: 3 | RNVC: 2
42315-181: RNCC: 5 | RNVC: 9

28 Jan 2012

3040-01-602-0685
Spur Gearshaft

016020685
42315-63: RNCC: 3 | RNVC: 2
42315-63: RNCC: 5 | RNVC: 9

26 Jan 2012

3040-01-602-4929
Linear Actuating Cylinder Head

016024929
1U4010: RNCC: 3 | RNVC: 2

31 Jan 2012

3040-01-603-1223
Shaft Retaining Plate

016031223
803-7504731-18A-A: RNCC: 3 | RNVC: 2

23 Feb 2012

3040-01-604-4480
Linear Actuating Cylinder Assembly

016044480
898479A03: RNCC: 3 | RNVC: 2
898479A02: RNCC: 5 | RNVC: 9

5 Apr 2012

3040-01-605-4093
Rigid Connecting Link

016054093
347/20064: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-606-8751
Rigid Connecting Link

016068751
26-5124: RNCC: 3 | RNVC: 2

25 May 2012

3040-01-606-3083
Linear Actuating Cylinder Assembly

016063083
347029: RNCC: 3 | RNVC: 2
46552053: RNCC: 5 | RNVC: 2

16 May 2012

3040-01-607-1101
Linear Actuating Cylinder Cap

016071101
R8506195-SP102: RNCC: 3 | RNVC: 2
R8506195-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-541-4742
Manual Control Lever

015414742
29903-01A: RNCC: 3 | RNVC: 2
205101 ITEM 14: RNCC: 5 | RNVC: 2

28 Jun 2006

3040-01-543-8562
Shouldered Shaft

015438562
30295-1250-4: RNCC: 3 | RNVC: 2
30295-1250-4: RNCC: 5 | RNVC: 9

22 Sep 2006

3040-01-573-5672
Manual Control Lever Assembly

015735672
061475-105: RNCC: 3 | RNVC: 2
061475-105: RNCC: 5 | RNVC: 2

28 Apr 2009

3040-01-573-5720
Linear Actuating Cylinder

015735720
ABR206: RNCC: 3 | RNVC: 2
L1693-02-205 ITEM #7: RNCC: 5 | RNVC: 9
P1AL-06I1C-GS32: RNCC: 5 | RNVC: 9
P1AP-06I1E-GS32: RNCC: 5 | RNVC: 9

28 Apr 2009

3040-01-573-7651
Belt-Chain Tension Adjusting Device

015737651
14510-ZY6-003: RNCC: 3 | RNVC: 9

5 May 2009

3040-01-561-4072
Manual Control Lever

015614072
258-4045: RNCC: 3 | RNVC: 2

5 Mar 2008

3040-01-561-8226
Mechanical Drive Housing

015618226
880696A08: RNCC: 3 | RNVC: 2
880696A08: RNCC: 5 | RNVC: 2

19 Mar 2008

3040-01-562-0225
Shouldered Shaft

015620225
193881: RNCC: 3 | RNVC: 2
20866033: RNCC: 5 | RNVC: 1
20866004 FIND NO 2: RNCC: 5 | RNVC: 2

26 Mar 2008

3040-01-527-7363
Shouldered Shaft

015277363
107318-00: RNCC: 3 | RNVC: 2
107318-A1 ITEM 1: RNCC: 5 | RNVC: 2

15 Feb 2005

3040-01-528-2535
Shaft Retaining Plate

015282535
034-032-00: RNCC: 3 | RNVC: 2

8 Mar 2005

3040-01-528-3682
Shouldered Shaft

015283682
AT-LG-500-310: RNCC: 3 | RNVC: 2

10 Mar 2005

3040-01-527-7471
Rigid Connecting Link

015277471
11581492: RNCC: 3 | RNVC: 2

16 Feb 2005

3040-01-528-4266
Shouldered Shaft

015284266
P10384: RNCC: 3 | RNVC: 2

12 Mar 2005

3040-01-529-5127
Shouldered Shaft

015295127
6853521 ITEM NO. 2: RNCC: 3 | RNVC: 2
6853521: RNCC: D | RNVC: 9

20 Apr 2005

3040-01-529-7253
Body Hub

015297253
9901.0671: RNCC: 3 | RNVC: 2
KDF1604: RNCC: D | RNVC: 9

28 Apr 2005

3040-01-529-3330
Piston Ring Set

015293330
960145-95: RNCC: 3 | RNVC: 2

13 Apr 2005

3040-01-530-0299
Control Cam Assembly

015300299
2059AS738-01: RNCC: 3 | RNVC: 2
2059AS738-01: RNCC: 5 | RNVC: 2

12 May 2005

3040-01-530-8944
Straight Shaft

015308944
465-4464-2: RNCC: 3 | RNVC: 9
465-4464-2: RNCC: C | RNVC: 1

15 Jun 2005

3040-01-531-0817
Counterbalance Weight

015310817
9127M56P01: RNCC: 3 | RNVC: 2

21 Jun 2005

3040-01-532-0690
Remote Control Lever

015320690
000993-158: RNCC: 3 | RNVC: 2
000993-158: RNCC: 5 | RNVC: 2

27 Jul 2005

3040-01-532-5704
Manual Control Lever

015325704
B5-HRS: RNCC: 3 | RNVC: 2

12 Aug 2005

3040-01-534-7399
Ball Joint

015347399
EST250: RNCC: 3 | RNVC: 2

1 Nov 2005

3040-01-535-5152
Housing Adapter

015355152
01318300: RNCC: 3 | RNVC: 2

2 Dec 2005

3040-01-536-0854
Straight Shaft

015360854
38514-546 15010: RNCC: 3 | RNVC: 2
38514-546: RNCC: 5 | RNVC: 9
38514-546 05010: RNCC: 5 | RNVC: 9

20 Dec 2005

3040-01-536-2768
Control Cable Assembly

015362768
7335247: RNCC: 3 | RNVC: 2
7335247-1 AND 7335247-2: RNCC: 3 | RNVC: 2
7335247: RNCC: 3 | RNVC: 2
7335247-1: RNCC: 5 | RNVC: 2
7335247-2: RNCC: 5 | RNVC: 2

27 Dec 2005

3040-01-538-0338
Ball Joint

015380338
3479345: RNCC: 1 | RNVC: 2
HCOM-22TS-9: RNCC: 3 | RNVC: 2
3479345: RNCC: 5 | RNVC: 9

8 Mar 2006

3040-01-541-1129
Hydraulic Accumulator Cylinder

015411129
6602231: RNCC: 3 | RNVC: 2
5HB66: RNCC: 5 | RNVC: 2
5HB66: RNCC: 5 | RNVC: 9

15 Jun 2006

3040-01-541-4271
Clutch Arm

015414271
005182-07: RNCC: 3 | RNVC: 2

27 Jun 2006

3040-01-541-4732
Straight Shaft

015414732
005541: RNCC: 3 | RNVC: 2

28 Jun 2006

3040-01-541-8766
Shaft Retaining Plate

015418766
007416: RNCC: 3 | RNVC: 2

14 Jul 2006

3040-01-542-1907
Rotary Actuating Cylinder Assembly

015421907
M3113: RNCC: 3 | RNVC: 2
M2715: RNCC: 5 | RNVC: 9

26 Jul 2006

3040-01-542-3707
Mechanical Drive Housing Part

015423707
9775PE: RNCC: 3 | RNVC: 2

2 Aug 2006

3040-01-542-4926
Nonrotating Shaft Eye Bracket

015424926
803-6397269 DETAIL 142-A: RNCC: 3 | RNVC: 2
803-6397269 PC 196: RNCC: 5 | RNVC: 2
803-6397269 DETAIL 126-A: RNCC: 5 | RNVC: 9

8 Aug 2006

3040-01-542-8464
Rigid Connecting Link

015428464
F055223: RNCC: 3 | RNVC: 2
F053003 ITEM 5: RNCC: 5 | RNVC: 2

22 Aug 2006

3040-01-545-0796
Rigid Connecting Link

015450796
8728-004-00V: RNCC: 3 | RNVC: 2

1 Nov 2006

3040-01-545-0805
Rigid Connecting Link

015450805
8728-024-00L: RNCC: 3 | RNVC: 2

1 Nov 2006

3040-01-545-7392
Linear Actuating Cylinder Cap

015457392
594/14025: RNCC: 3 | RNVC: 2

24 Nov 2006

3040-01-546-1414
Remote Control Lever

015461414
20015301: RNCC: 3 | RNVC: 2
20015301: RNCC: 3 | RNVC: 9
IQAN-LSL-E0-DN-L2-S: RNCC: 5 | RNVC: 9

7 Dec 2006

3040-01-546-1725
Shouldered Shaft

015461725
112833: RNCC: 3 | RNVC: 2

7 Dec 2006

3040-01-547-0531
Spur Gearshaft

015470531
B5547: RNCC: 3 | RNVC: 2

11 Jan 2007

3040-01-547-0525
Spur Gearshaft

015470525
S055480004: RNCC: 3 | RNVC: 2
B5548: RNCC: 3 | RNVC: 9

11 Jan 2007

3040-01-546-5501
Linear Actuating Cylinder Piston Rod

015465501
590/40317: RNCC: 3 | RNVC: 2

20 Dec 2006

3040-01-546-7065
Mechanical Drive Housing

015467065
901-045-213-101: RNCC: 3 | RNVC: 2

28 Dec 2006

3040-01-548-2877
Linear Actuating Cylinder Assembly

015482877
16236003-1: RNCC: 3 | RNVC: 2
CHH4025C-16-MT2-41345-2-9-5: RNCC: 3 | RNVC: 9
16231000 FIND NO.6: RNCC: 5 | RNVC: 9
16236003-1: RNCC: 5 | RNVC: 9

16 Feb 2007

3040-01-548-2633
Mechanically Actuated Spindle

015482633
J16222040-1: RNCC: 3 | RNVC: 2
16221800 FIND NO.1: RNCC: 5 | RNVC: 2
16222040-1: RNCC: 5 | RNVC: 2
16221810 FIND NO.1: RNCC: 5 | RNVC: 9
16222040-1: RNCC: 5 | RNVC: 9

15 Feb 2007

3040-01-548-4238
Shouldered Shaft

015484238
N7415: RNCC: 3 | RNVC: 2
16KP871: RNCC: 5 | RNVC: 2
16KP871: RNCC: 5 | RNVC: 9

22 Feb 2007

3040-01-548-5517
Manual Control Lever

015485517
LSZ51P: RNCC: 3 | RNVC: 2
F056093 ITEM 34: RNCC: 5 | RNVC: 2
F064973 IT 12: RNCC: 5 | RNVC: 2
F059458: RNCC: 5 | RNVC: 2
LSZ51P: RNCC: 5 | RNVC: 9

27 Feb 2007

3040-01-549-0891
Rigid Connecting Link

015490891
837C10250-1: RNCC: 3 | RNVC: 9
837C10250-1: RNCC: C | RNVC: 1

12 Mar 2007

3040-01-549-1540
Pneumatic Actuator Cylinder Housing

015491540
ZTR30A: RNCC: 3 | RNVC: 2

13 Mar 2007

3040-01-549-1413
Linear Actuating Cylinder Piston Rod

015491413
196164A1: RNCC: 3 | RNVC: 2

13 Mar 2007

3040-01-549-1992
Worm Wheel Gearshaft

015491992
CL40MRSBML-C: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-7943
Rigid Connecting Link

015497943
347/00245: RNCC: 3 | RNVC: 2

29 Mar 2007

3040-01-549-4127
Rigid Connecting Link

015494127
347/00243: RNCC: 3 | RNVC: 2

20 Mar 2007

3040-01-550-5979
Transmission Fluid Cooler

015505979
412902: RNCC: 3 | RNVC: 2
412902: RNCC: 5 | RNVC: 2
412902: RNCC: 5 | RNVC: 9

24 Apr 2007

3040-01-551-9144
Straight Shaft

015519144
4F19311-101A: RNCC: 3 | RNVC: 2

31 May 2007

3040-01-551-6123
Spur Gearshaft

015516123
SS350R-13-895: RNCC: 3 | RNVC: 2
04323275 REV B: RNCC: 5 | RNVC: 2

22 May 2007

3040-01-552-5051
Rigid Connecting Link

015525051
HR-470-50: RNCC: 3 | RNVC: 9
HR-470-50: RNCC: C | RNVC: 1

14 Jun 2007

3040-01-558-5487
Pivot Shaft Assembly

015585487
12KP281: RNCC: 3 | RNVC: 2
12KP281: RNCC: 5 | RNVC: 9

14 Nov 2007

3040-01-558-7151
Pawl

015587151
9951.0029: RNCC: 3 | RNVC: 2

20 Nov 2007

3040-01-560-5902
Grease Cap

015605902
HU8P-GC-4000: RNCC: 3 | RNVC: 2

5 Feb 2008

3040-01-560-0306
Remote Control Lever

015600306
362455630: RNCC: 3 | RNVC: 2

14 Jan 2008

3040-01-561-3843
Housing Adapter

015613843
258-3319: RNCC: 3 | RNVC: 2

4 Mar 2008

3040-01-554-8800
Shouldered Shaft

015548800
GMHOD75Z200: RNCC: 3 | RNVC: 2

22 Aug 2007

3040-01-555-1360
Control Cable Assembly

015551360
18505908: RNCC: 3 | RNVC: 2
18505900 / PN-18505908: RNCC: 5 | RNVC: 9

30 Aug 2007

3040-01-555-8990
Shouldered Shaft Assembly

015558990
29536845: RNCC: 3 | RNVC: 2

18 Sep 2007

3040-01-562-6116
Friction Lining

015626116
572932-80: RNCC: 3 | RNVC: 2
580040-02 REF 28: RNCC: 5 | RNVC: 1
574535-81 REF 7: RNCC: 5 | RNVC: 1

14 Apr 2008

3040-01-563-2196
Shouldered Shaft

015632196
6035170: RNCC: 3 | RNVC: 2
6031733: RNCC: 5 | RNVC: 9

6 May 2008

3040-01-563-4393
Linear Actuating Cylinder Cap

015634393
8242896: RNCC: 3 | RNVC: 2

12 May 2008

Load More Results