What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 109 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 109 of 300

3040-01-650-2867
Housing Adapter

016502867
7-562107001-603: RNCC: 3 | RNVC: 2
7-562107001: RNCC: D | RNVC: 9

25 Nov 2015

3040-01-650-0479
Rigid Connecting Link

016500479
212A1125-3: RNCC: 3 | RNVC: 2

18 Nov 2015

3040-01-650-3105
Linear Actuating Cylinder Assembly

016503105
333/E3644: RNCC: 3 | RNVC: 2
333/E3644: RNCC: 5 | RNVC: 2

27 Nov 2015

3040-01-652-9929
Linear Actuating Cylinder Piston Rod

016529929
EP-0019824: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-652-9932
Linear Actuating Cylinder Piston Rod

016529932
EP-0021826: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-1731
Linear Actuating Cylinder

016531731
EP-0021944: RNCC: 3 | RNVC: 2

14 Mar 2016

3040-01-653-6842
Mechanical Drive Housing Part

016536842
MR-3A: RNCC: 3 | RNVC: 2

1 Apr 2016

3040-01-654-4205
Straight Shaft Assembly

016544205
256T5710-503: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-654-5509
Straight Shaft Assembly

016545509
256T5710-127: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-654-5547
Straight Shaft Assembly

016545547
256T5710-119: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-654-5570
Straight Shaft Assembly

016545570
256T5710-113: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-656-5335
Worm Wheel Gearshaft

016565335
4646.323.015: RNCC: 3 | RNVC: 2

7 Jul 2016

3040-01-658-6100
Shouldered Shaft Assembly

016586100
FV110519P1: RNCC: 3 | RNVC: 2
FV110519: RNCC: D | RNVC: 9

5 Oct 2016

3040-01-659-0712
Rigid Connecting Link

016590712
145C2013-5: RNCC: 3 | RNVC: 2

2 Nov 2016

3040-01-658-5952
Linear Actuating Cylinder

016585952
RCS-92015: RNCC: 3 | RNVC: 2

5 Oct 2016

3040-01-659-4875
Straight Shaft

016594875
4193958: RNCC: 3 | RNVC: 2

30 Nov 2016

3040-01-659-7896
Transfer Drive Clutch Shaft

016597896
4235162: RNCC: 1 | RNVC: 2
GS-5123: RNCC: 3 | RNVC: 2

15 Dec 2016

3040-01-667-5997
Flexible Drive Shaft

016675997
14001309: RNCC: 3 | RNVC: 2

24 Oct 2017

3040-01-668-8160
Rigid Connecting Link

016688160
65302-12544-041: RNCC: 3 | RNVC: 2
65302-12544-041: RNCC: 5 | RNVC: 2

8 Dec 2017

3040-01-668-8707
Shouldered Shaft

016688707
8M0048180: RNCC: 3 | RNVC: 2

11 Dec 2017

3040-01-670-3975
Straight Shaft

016703975
87011A0622M1: RNCC: 3 | RNVC: 2

21 Feb 2018

3040-01-689-8412
Linear Actuating Cylinder Assembly

016898412
4651451: RNCC: 3 | RNVC: 2

14 Jul 2020

3040-01-672-6382
Remote Control Lever

016726382
12608038: RNCC: 3 | RNVC: 2
12608038: RNCC: D | RNVC: 9

10 May 2018

3040-01-692-8987
Multiple Gears Gearshaft

016928987
8592279-002: RNCC: 3 | RNVC: 2
311-8592279: RNCC: D | RNVC: 9

15 Jan 2021

3040-01-676-7840
Bevel Gearshaft

016767840
68309: RNCC: 3 | RNVC: 2
60563 FN39: RNCC: 5 | RNVC: 2

13 Nov 2018

3040-01-696-6506
Shouldered Shaft

016966506
K06.56269-0606: RNCC: 3 | RNVC: 2

9 Aug 2021

3040-01-615-2194
Disc Brake Caliper

016152194
BRDM12-SSCAL-316: RNCC: 3 | RNVC: 2

4 Jan 2013

3040-01-609-1408
Rigid Connecting Link

016091408
803-6397268 REV - PC NO.91: RNCC: 3 | RNVC: 2
803-6397268 REV -: RNCC: D | RNVC: 9

17 Jul 2012

3040-01-609-6573
Hydraulic Accumulator

016096573
801000003: RNCC: 3 | RNVC: 2
801000003: RNCC: 3 | RNVC: 9

31 Jul 2012

3040-01-621-9187
Linear Actuating Cylinder Assembly

016219187
9416K192: RNCC: 3 | RNVC: 2
C16-14874-133N-30#: RNCC: 5 | RNVC: 2
11027B0704: RNCC: 7 | RNVC: 2

23 Sep 2013

3040-01-681-5050
Control Cam

016815050
159113: RNCC: 3 | RNVC: 2
DS-B99977-03-8-09-11-RF-09-FF-: RNCC: 5 | RNVC: 2

20 Jun 2019

3040-01-682-2861
Shouldered Shaft

016822861
609039-33-A: RNCC: 3 | RNVC: 2
801627-639 PC NO 31A: RNCC: C | RNVC: 1
801627-639: RNCC: D | RNVC: 9

31 Jul 2019

3040-01-684-4466
Linear Actuating Cylinder Assembly

016844466
B33004: RNCC: 3 | RNVC: 2
B33004: RNCC: 5 | RNVC: 2
B33004: RNCC: 5 | RNVC: 2

4 Nov 2019

3040-01-672-8539
Rigid Connecting Link

016728539
12608039: RNCC: 3 | RNVC: 2
12608039: RNCC: 5 | RNVC: 2

18 May 2018

3040-01-672-9796
Spur Gearshaft

016729796
1712609: RNCC: 3 | RNVC: 2

24 May 2018

3040-01-617-2533
Straight Shaft

016172533
1365856: RNCC: 3 | RNVC: 2
1365856: RNCC: 5 | RNVC: 2
1365856: RNCC: 5 | RNVC: 2

18 Mar 2013

3040-01-617-5674
Belt-Chain Tension Adjusting Device

016175674
1514087: RNCC: 3 | RNVC: 2
1514087: RNCC: 5 | RNVC: 2

27 Mar 2013

3040-01-614-9711
Helical Gearshaft

016149711
41012325-102: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-615-0369
Nonvehicular Propeller Shaft

016150369
1501092: RNCC: 3 | RNVC: 2
1501092: RNCC: 5 | RNVC: 2

21 Dec 2012

3040-01-615-2200
Disk Brake Shoe

016152200
BRDM10-12-PAD-316: RNCC: 3 | RNVC: 2

4 Jan 2013

3040-01-615-7415
Pivot Shaft Assembly

016157415
EP-0009142: RNCC: 3 | RNVC: 2

22 Jan 2013

3040-01-608-6927
Shaft-Hub Clamp-Bushing Assembly

016086927
2ABC12005: RNCC: 3 | RNVC: 2
2ABC12005: RNCC: 3 | RNVC: 9

9 Jul 2012

3040-01-613-1846
Rigid Connecting Link

016131846
269D1336-3: RNCC: 3 | RNVC: 2
269D1336-3: RNCC: 3 | RNVC: 9
269D1336-3: RNCC: 5 | RNVC: 9

1 Nov 2012

3040-01-614-7217
Straight Shaft

016147217
3620156-2: RNCC: 3 | RNVC: 2

13 Dec 2012

3040-01-614-9699
Shouldered Shaft

016149699
41012345: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-620-4410
Helical-Spur Gearshaft

016204410
185-5630: RNCC: 3 | RNVC: 2

24 Jul 2013

3040-01-620-3390
Remote Control Lever

016203390
184-0059: RNCC: 3 | RNVC: 2

18 Jul 2013

3040-01-621-5491
Rigid Connecting Link

016215491
13210-PGK-A00: RNCC: 3 | RNVC: 9

11 Sep 2013

3040-01-625-4179
Friction Lining

016254179
TMS-8929-08-PC3: RNCC: 3 | RNVC: 2

4 Feb 2014

3040-01-625-8340
Straight Shaft

016258340
71-004-0121: RNCC: 3 | RNVC: 2

18 Feb 2014

3040-01-625-0636
Linear Actuating Cylinder Assembly Parts Kit

016250636
J212551: RNCC: 3 | RNVC: 2
RPK-B/M-2068: RNCC: 5 | RNVC: 9
1D-1335-PL REV A ITEM1: RNCC: 5 | RNVC: 9

23 Jan 2014

3040-01-626-2487
Shouldered Shaft

016262487
3535983: RNCC: 3 | RNVC: 2

4 Mar 2014

3040-01-626-6085
Linear Actuating Cylinder Assembly Parts Kit

016266085
HV2-KR120-138: RNCC: 3 | RNVC: 9
D-WK871-63 REV A/HV2-KR120-138: RNCC: 5 | RNVC: 2

17 Mar 2014

3040-01-626-5733
Shouldered Shaft

016265733
7010663: RNCC: 3 | RNVC: 2

14 Mar 2014

3040-01-627-4260
Linear Actuating Cylinder Assembly

016274260
3770121146: RNCC: 3 | RNVC: 2

14 Apr 2014

3040-01-629-3144
Flexible Drive Shaft

016293144
14001341: RNCC: 3 | RNVC: 2
14001341: RNCC: 3 | RNVC: 9

25 Jun 2014

3040-01-632-5640
Rigid Connecting Link

016325640
69-39176-1: RNCC: 3 | RNVC: 2

23 Oct 2014

3040-01-640-8882
Control Cam

016408882
12585720: RNCC: 3 | RNVC: 2

30 Dec 2014

3040-01-641-6760
Bevel Gearshaft

016416760
70358-06620-106: RNCC: 3 | RNVC: 2
70358-06620: RNCC: D | RNVC: 9

29 Jan 2015

3040-01-642-3480
Rigid Connecting Link

016423480
852-39-SS: RNCC: 3 | RNVC: 2
D-WK-879-65 REV H PC# 8: RNCC: C | RNVC: 1

23 Feb 2015

3040-01-641-7474
Linear Actuating Cylinder Assembly

016417474
MIL-001-130: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-643-9415
Ball Joint

016439415
L3011797-005: RNCC: 3 | RNVC: 2

16 Apr 2015

3040-01-645-4081
Linear Actuating Cylinder Assembly

016454081
50JCHDBT8A75: RNCC: 3 | RNVC: 2
F160285: RNCC: 7 | RNVC: 2
F181101 ITEM 2: RNCC: C | RNVC: 1
F160197 ITEM 2: RNCC: C | RNVC: 1

15 Jun 2015

3040-01-645-5744
Push-Pull Control Assembly

016455744
40-250-TTL-BH-3: RNCC: 3 | RNVC: 2
F177893 REV A ITEM NO.8: RNCC: C | RNVC: 1
F177893: RNCC: D | RNVC: 9

22 Jun 2015

3040-01-644-0124
Shouldered Shaft

016440124
300432-1: RNCC: 3 | RNVC: 2
300842-01RH-2 ITEM 5: RNCC: 5 | RNVC: 9

20 Apr 2015

3040-01-647-2568
Linear Actuating Cylinder

016472568
EP-0021222: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-647-6042
Mechanical Drive Housing

016476042
3695173: RNCC: 3 | RNVC: 2

26 Aug 2015

3040-01-647-7133
Mechanical Drive Housing

016477133
4308423: RNCC: 3 | RNVC: 2
3585387: RNCC: 5 | RNVC: 9

29 Aug 2015

3040-01-649-0163
Housing Adapter

016490163
2AFF01005: RNCC: 3 | RNVC: 2
2AFF01005: RNCC: 3 | RNVC: 9

15 Oct 2015

3040-01-649-3084
Shouldered Shaft

016493084
29385: RNCC: 3 | RNVC: 2

26 Oct 2015

3040-01-650-0481
Rigid Connecting Link

016500481
212A1125-32: RNCC: 3 | RNVC: 2

18 Nov 2015

3040-01-651-0506
Flexible Drive Shaft

016510506
208821-00: RNCC: 3 | RNVC: 2

31 Dec 2015

3040-01-651-0388
Linear Actuating Cylinder Assembly

016510388
AVP-0.75X2.25-R: RNCC: 3 | RNVC: 2
3907609: RNCC: 7 | RNVC: 2

30 Dec 2015

3040-01-652-7820
Spur Gearshaft

016527820
67411644-1: RNCC: 3 | RNVC: 2
67411644-1: RNCC: 5 | RNVC: 2

3 Mar 2016

3040-01-653-0200
Rigid Connecting Link

016530200
69-1989-7: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-1258
Linear Actuating Cylinder Piston Rod

016531258
EP-0021965: RNCC: 3 | RNVC: 2

11 Mar 2016

3040-01-653-1459
Piston Ring

016531459
CC-0011468: RNCC: 3 | RNVC: 2

14 Mar 2016

3040-01-653-3742
Cartridge Assembly

016533742
008-9224-949: RNCC: 3 | RNVC: 2
243-7670407 ITEM NO. 19: RNCC: 3 | RNVC: 9
1Q8901-0010-01A ITEM 8: RNCC: C | RNVC: 1

22 Mar 2016

3040-01-655-4052
Pawl

016554052
69B81068-3: RNCC: 3 | RNVC: 1

26 May 2016

3040-01-657-2350
Rigid Connecting Link

016572350
4F61085-101A: RNCC: 3 | RNVC: 2

4 Aug 2016

3040-01-657-2352
Mechanically Actuated Spindle

016572352
8100-1251-0265 PT NO 115: RNCC: 3 | RNVC: 2

4 Aug 2016

3040-01-658-2942
Mechanical Drive Housing Part

016582942
8M0117254: RNCC: 3 | RNVC: 2

21 Sep 2016

3040-01-659-2076
Control Cable Assembly

016592076
320-3705: RNCC: 3 | RNVC: 2

9 Nov 2016

3040-01-661-0663
Nonaircraft Mechanical Actuator

016610663
S753300152-03: RNCC: 3 | RNVC: 2
S753300152-02: RNCC: 5 | RNVC: 9

15 Feb 2017

3040-01-661-9237
Spider Cam

016619237
617227016: RNCC: 3 | RNVC: 2
617257007 REV - FIND NO 3: RNCC: 5 | RNVC: 2

21 Mar 2017

3040-01-663-3044
Shouldered Shaft

016633044
101008-0001: RNCC: 3 | RNVC: 2
284156-0007ITEM9: RNCC: C | RNVC: 1
284156-0007: RNCC: D | RNVC: 9

4 May 2017

3040-01-665-0449
Shouldered Shaft

016650449
8M0140439: RNCC: 3 | RNVC: 2
8M0031504: RNCC: 5 | RNVC: 9

17 Jul 2017

3040-01-666-3077
Rigid Connecting Link

016663077
3637: RNCC: 3 | RNVC: 2

31 Aug 2017

3040-01-665-6955
Manual Control Lever Assembly

016656955
201219020-10: RNCC: 3 | RNVC: 2

9 Aug 2017

3040-01-669-5276
Straight Shaft

016695276
M27780011: RNCC: 3 | RNVC: 2
A31170064 ITEM NO. 38: RNCC: 5 | RNVC: 1
A31170064: RNCC: D | RNVC: 9

10 Jan 2018

3040-01-670-3461
Linear Actuating Cylinder Assembly

016703461
400NPLUE16AX3.00: RNCC: 3 | RNVC: 2
5190-1: RNCC: 5 | RNVC: 2
4.00NPLUE16AX3.00: RNCC: 5 | RNVC: 9

16 Feb 2018

3040-01-671-3350
Mechanically Actuated Spindle

016713350
12606012: RNCC: 3 | RNVC: 2
12606012: RNCC: C | RNVC: 1

22 Mar 2018

3040-01-674-2273
Linear Actuating Cylinder Piston Rod

016742273
211036037: RNCC: 3 | RNVC: 2
512-6405698 FIND 5: RNCC: 5 | RNVC: 1
DF6501-78 FIND 5: RNCC: 5 | RNVC: 1
512-6405301 FIND 1: RNCC: 5 | RNVC: 1
512-6405301: RNCC: D | RNVC: 9

17 Jul 2018

3040-01-673-5654
Ball Joint

016735654
201219027-01: RNCC: 3 | RNVC: 2
SR111G: RNCC: 3 | RNVC: 2
201219027: RNCC: 7 | RNVC: 2

18 Jun 2018

3040-01-679-7456
Flexible Drive Shaft

016797456
12118-1400: RNCC: 3 | RNVC: 2

9 Apr 2019

3040-01-681-1811
Rigid Connecting Link

016811811
P90011-0002: RNCC: 3 | RNVC: 2
P90015-0001: RNCC: 3 | RNVC: 2
P90073-4 FIND NO 28: RNCC: 5 | RNVC: 9
P90011-2: RNCC: 5 | RNVC: 9

7 Jun 2019

3040-01-684-1765
Rigid Connecting Link

016841765
108756-1: RNCC: 3 | RNVC: 2

24 Oct 2019

3040-01-686-4007
Rigid Connecting Link

016864007
42737-1: RNCC: 3 | RNVC: 2
42737: RNCC: 3 | RNVC: 2
42737-1: RNCC: 5 | RNVC: 9

12 Feb 2020

3040-01-688-8933
Flexible Shaft Assembly

016888933
22001-100X3FT: RNCC: 3 | RNVC: 2
22001-100X36IN: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

29 May 2020

3040-01-689-8361
Rigid Connecting Link

016898361
4158977: RNCC: 3 | RNVC: 2

14 Jul 2020

3040-01-689-8409
Linear Actuating Cylinder Assembly

016898409
4651449: RNCC: 3 | RNVC: 2

14 Jul 2020

3040-01-691-2396
Mechanical Drive Housing Part

016912396
682617-06: RNCC: 3 | RNVC: 2

29 Sep 2020

3040-01-696-1310
Brake Backing Plate

016961310
H250T1-6000-4RH: RNCC: 3 | RNVC: 2

12 Jul 2021

3040-01-616-1715
Friction Lining Material

016161715
3J-266714: RNCC: 3 | RNVC: 2

4 Feb 2013

3040-01-616-7155
Shaft Collar

016167155
13028822: RNCC: 3 | RNVC: 2

25 Feb 2013

3040-01-617-6316
Remote Control Lever

016176316
2ABR12007: RNCC: 3 | RNVC: 2
2ABR12007: RNCC: 3 | RNVC: 9

28 Mar 2013

3040-01-608-5965
Shouldered Axle

016085965
901-031-724-139: RNCC: 3 | RNVC: 2

3 Jul 2012

3040-01-609-1042
Manual Control Lever

016091042
6035176: RNCC: 3 | RNVC: 2

16 Jul 2012

3040-01-620-6838
Shaft Retaining Plate

016206838
185-5561: RNCC: 3 | RNVC: 2

6 Aug 2013

3040-01-622-0160
Straight Shaft Assembly

016220160
364-51640-000: RNCC: 3 | RNVC: 2
364-51396-000ITEM21: RNCC: 5 | RNVC: 2

25 Sep 2013

3040-01-611-6884
Counterbalance Weight

016116884
12522314: RNCC: 3 | RNVC: 2

21 Sep 2012

3040-01-612-5773
Manual Control Lever

016125773
4026674: RNCC: 3 | RNVC: 2
4026674: RNCC: 5 | RNVC: 9

15 Oct 2012

3040-01-614-5746
Housing Adapter

016145746
12542961: RNCC: 3 | RNVC: 2

7 Dec 2012

3040-01-624-0164
Counterbalance Weight

016240164
9319M30P08: RNCC: 3 | RNVC: 2

11 Dec 2013

3040-01-626-0808
Rigid Connecting Link

016260808
145C2013-6: RNCC: 3 | RNVC: 2

26 Feb 2014

3040-01-625-5576
Cylinder Support

016255576
12528485: RNCC: 3 | RNVC: 2
12528485: RNCC: 5 | RNVC: 2
12528485: RNCC: D | RNVC: 9

7 Feb 2014

3040-01-627-1791
Worm Shaft

016271791
301310-1: RNCC: 3 | RNVC: 2
CE221N REV D ITEM NO 34: RNCC: 5 | RNVC: 2

4 Apr 2014

3040-01-628-0846
Mechanical Drive Housing

016280846
41100-ZY3-E03ZB: RNCC: 3 | RNVC: 9

8 May 2014

3040-01-628-1254
Spur Gearshaft

016281254
14003321: RNCC: 3 | RNVC: 2
14003321: RNCC: 3 | RNVC: 9

9 May 2014

3040-01-628-5289
Spur Gearshaft

016285289
188C1546G1: RNCC: 3 | RNVC: 2

29 May 2014

3040-01-629-5979
Nonaircraft Mechanical Actuator

016295979
PA12650382 REV 2: RNCC: 3 | RNVC: 2
PA12650382 REV 2: RNCC: 3 | RNVC: 9
86551-A7: RNCC: 5 | RNVC: 2

8 Jul 2014

3040-01-631-8758
Linear Actuating Cylinder Assembly

016318758
FF510250400: RNCC: 3 | RNVC: 9
FF510250400: RNCC: 5 | RNVC: 2
FF510250400: RNCC: 5 | RNVC: 2
20544: RNCC: 5 | RNVC: 9

29 Sep 2014

3040-01-631-9769
Shouldered Shaft

016319769
11683944: RNCC: 3 | RNVC: 2

2 Oct 2014

3040-01-641-7486
Guide Shoe

016417486
MIL-001-1050: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-643-7334
Multiple Gears Gearshaft

016437334
F160555: RNCC: 3 | RNVC: 2
F160468 REV C ITEM NO. 7: RNCC: C | RNVC: 1

10 Apr 2015

3040-01-644-9065
Brake Lining Kit

016449065
5100500-701: RNCC: 3 | RNVC: 2
5100500-701: RNCC: 3 | RNVC: 9
5100500-701: RNCC: 5 | RNVC: 9
5100500: RNCC: D | RNVC: 9

26 May 2015

3040-01-645-4128
Sheave Pin

016454128
F160336: RNCC: 3 | RNVC: 2
F160196 ITEM 3: RNCC: C | RNVC: 1

15 Jun 2015

3040-01-646-0774
Nonaircraft Mechanical Actuator

016460774
5-MSJ-DC24:1/SSE-1/SSE-2/CC/28.-: RNCC: 3 | RNVC: 1
AJ-240091-1: RNCC: 5 | RNVC: 2

13 Jul 2015

3040-01-647-4920
Pivot Shaft Assembly

016474920
490465: RNCC: 3 | RNVC: 2

24 Aug 2015

3040-01-649-2176
Rigid Connecting Link

016492176
6061T56P27: RNCC: 3 | RNVC: 2

21 Oct 2015

3040-01-651-6475
Control Cam

016516475
38004ZY: RNCC: 3 | RNVC: 2
206503 ITEM NO 1-13: RNCC: C | RNVC: 1

25 Jan 2016

3040-01-652-2880
Linear Actuating Cylinder Piston

016522880
EP-0021720: RNCC: 3 | RNVC: 2

17 Feb 2016

3040-01-653-0797
Shouldered Shaft

016530797
161A6111-1: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-2330
Linear Actuating Cylinder Piston

016532330
EP-0021733: RNCC: 3 | RNVC: 2

15 Mar 2016

3040-01-653-1730
Linear Actuating Cylinder

016531730
EP-0021964: RNCC: 3 | RNVC: 2

14 Mar 2016

3040-01-653-3335
Pneumatic Actuator Cylinder Housing

016533335
EP-0021953: RNCC: 3 | RNVC: 2

21 Mar 2016

3040-01-653-5464
Transmission Sleeve

016535464
29516488: RNCC: 3 | RNVC: 2

28 Mar 2016

3040-01-654-1501
Rigid Connecting Link

016541501
74A182201-1006: RNCC: 3 | RNVC: 2

19 Apr 2016

3040-01-654-5559
Straight Shaft Assembly

016545559
256T5710-109: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-654-5330
Cylinder Support

016545330
704AS4070: RNCC: 3 | RNVC: 2

2 May 2016

3040-01-655-9451
Ball Joint

016559451
4-0043: RNCC: 3 | RNVC: 2
4-0043: RNCC: 5 | RNVC: 2
N0083: RNCC: D | RNVC: 9

13 Jun 2016

3040-01-656-3585
Shaft Collar

016563585
14002344: RNCC: 3 | RNVC: 2
14002344: RNCC: 3 | RNVC: 9

28 Jun 2016

3040-01-656-9120
Straight Shaft

016569120
EP-0021825: RNCC: 3 | RNVC: 2

22 Jul 2016

3040-01-657-6168
Straight Shaft

016576168
16261209-1: RNCC: 3 | RNVC: 2
16261100 REV X FN 22: RNCC: 5 | RNVC: 1
16261100 REV X: RNCC: D | RNVC: 9

23 Aug 2016

3040-01-658-4122
Rigid Connecting Link

016584122
141A6497-1: RNCC: 3 | RNVC: 2

26 Sep 2016

3040-01-662-3757
Mechanical Drive Housing Part

016623757
5400-4-999-000: RNCC: 3 | RNVC: 2
0511PL FIND 5: RNCC: 5 | RNVC: 2

5 Apr 2017

3040-01-665-3476
Pawl

016653476
74A460601-1007: RNCC: 3 | RNVC: 2
74A460601-1007: RNCC: 5 | RNVC: 2
74A460601-1007: RNCC: 5 | RNVC: 2

26 Jul 2017

3040-01-663-3150
Shaft Retaining Plate

016633150
101012-0002: RNCC: 3 | RNVC: 2
284156-0007ITEM13: RNCC: C | RNVC: 1
284156-0007: RNCC: D | RNVC: 9

5 May 2017

3040-01-667-2469
Rigid Connecting Link

016672469
4C63119-101A: RNCC: 3 | RNVC: 2

10 Oct 2017

3040-01-667-6873
Straight Shaft

016676873
14001308: RNCC: 3 | RNVC: 2

26 Oct 2017

3040-01-668-6687
Shouldered Shaft

016686687
7662492: RNCC: 3 | RNVC: 2
05079028: RNCC: 5 | RNVC: 2
SW325-AC-IPB-010 FIG/INDEX 36-89: RNCC: C | RNVC: 1

1 Dec 2017

3040-01-672-3038
Linear Actuating Cylinder Piston Rod

016723038
P546347: RNCC: 3 | RNVC: 2
DU500023061 ITEM 7: RNCC: D | RNVC: 9

26 Apr 2018

3040-01-680-4156
Rigid Connecting Link

016804156
P90018-0002: RNCC: 3 | RNVC: 2
P90018-2: RNCC: 5 | RNVC: 9
P90073-4 FIND NO 41: RNCC: C | RNVC: 1
P90073-4: RNCC: D | RNVC: 9

3 May 2019

3040-01-681-6597
Rigid Connecting Link

016816597
102526-0036: RNCC: 3 | RNVC: 2
285151-0001 ITEM 24: RNCC: C | RNVC: 1

27 Jun 2019

3040-01-682-2402
Linear Actuating Cylinder Assembly

016822402
210-7088: RNCC: 3 | RNVC: 2

29 Jul 2019

3040-01-683-1362
Linear Actuating Cylinder Assembly

016831362
1H2H0A00276504: RNCC: 3 | RNVC: 2
1H2H0A00276504: RNCC: 5 | RNVC: 2

10 Sep 2019

3040-01-688-6348
Shouldered Shaft Assembly

016886348
1030609-1: RNCC: 3 | RNVC: 2

21 May 2020

3040-01-689-0230
Power Transmission Components Boot

016890230
1750 BOOT: RNCC: 3 | RNVC: 2

3 Jun 2020

3040-01-689-0366
Power Transmission Components Boot

016890366
1250 BOOT: RNCC: 3 | RNVC: 2

3 Jun 2020

3040-01-692-3565
Straight Shaft

016923565
70400-02172-103: RNCC: 3 | RNVC: 2

9 Dec 2020

3040-01-697-0940
Manual Control Lever Assembly

016970940
2669954: RNCC: 3 | RNVC: 2
2669954: RNCC: 3 | RNVC: 9

1 Sep 2021

3040-01-620-4444
Shaft Collar

016204444
A040R002: RNCC: 3 | RNVC: 2
184-0057: RNCC: 5 | RNVC: 9

24 Jul 2013

3040-01-621-3828
Linear Actuating Cylinder Assembly

016213828
WK-871-125: RNCC: 3 | RNVC: 2

5 Sep 2013

3040-01-609-0703
Manual Control Lever

016090703
6035175: RNCC: 3 | RNVC: 2

16 Jul 2012

3040-01-611-5458
Shaft Collar

016115458
12282289: RNCC: 3 | RNVC: 2

18 Sep 2012

3040-01-615-9809
Linear Actuating Cylinder Piston

016159809
050GP0029: RNCC: 3 | RNVC: 9
1007761: RNCC: 5 | RNVC: 2

29 Jan 2013

3040-01-611-5005
Shouldered Shaft

016115005
12282428: RNCC: 3 | RNVC: 2

17 Sep 2012

3040-01-614-9702
Shouldered Shaft

016149702
41012344: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-614-9920
Straight Shaft

016149920
800918: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-615-0490
Shouldered Shaft

016150490
6023400-001: RNCC: 3 | RNVC: 2
28KP080: RNCC: 5 | RNVC: 2
28KP080: RNCC: 5 | RNVC: 9

26 Dec 2012

3040-01-615-0829
Flexible Control Casing

016150829
7-5R2430107-001: RNCC: 3 | RNVC: 2

27 Dec 2012

3040-01-615-2961
Straight Axle

016152961
AXTDF06-76-22: RNCC: 3 | RNVC: 2

8 Jan 2013

3040-01-610-0724
Grease Cap

016100724
1859107: RNCC: 3 | RNVC: 2

9 Aug 2012

3040-01-611-1141
Linear Actuating Cylinder

016111141
13041942: RNCC: 3 | RNVC: 2

6 Sep 2012

3040-01-611-4101
Outrigger Cylinder

016114101
200919776: RNCC: 3 | RNVC: 2
200919776: RNCC: 3 | RNVC: 2

13 Sep 2012

3040-01-617-0441
Mechanical Drive Housing

016170441
02585611: RNCC: 3 | RNVC: 2

8 Mar 2013

3040-01-617-1966
Straight Shaft

016171966
MP-0008582T: RNCC: 3 | RNVC: 2
EP-0008582: RNCC: D | RNVC: 9

14 Mar 2013

3040-01-620-2392
Shouldered Shaft

016202392
122E1059-G03: RNCC: 3 | RNVC: 2
122E1059G03: RNCC: 3 | RNVC: 9
122E1097-G01ITEM48: RNCC: 5 | RNVC: 9

11 Jul 2013

3040-01-620-8339
Rigid Connecting Link

016208339
12519542: RNCC: 3 | RNVC: 2
12519542: RNCC: 5 | RNVC: 2

13 Aug 2013

3040-01-620-5667
Clutch Release Bearing Carrier

016205667
150-2643-S0: RNCC: 3 | RNVC: 2
150-2643-S0: RNCC: 5 | RNVC: 9

30 Jul 2013

3040-01-624-0156
Counterbalance Weight

016240156
9319M30P11: RNCC: 3 | RNVC: 2

11 Dec 2013

3040-01-626-5136
Rigid Connecting Link

016265136
7010664: RNCC: 3 | RNVC: 2

12 Mar 2014

3040-01-626-5684
Manual Control Lever Assembly

016265684
MTM-10750: RNCC: 3 | RNVC: 2
MTM-10400: RNCC: 5 | RNVC: 9
MTM-10750: RNCC: 5 | RNVC: 9
12568950: RNCC: D | RNVC: 9

14 Mar 2014

3040-01-630-9067
Straight Shaft

016309067
27M-281: RNCC: 3 | RNVC: 2
BPR300-625ITEM13: RNCC: C | RNVC: 1

22 Aug 2014

3040-01-631-7971
Straight Shaft

016317971
35 79501 1059 2: RNCC: 3 | RNVC: 2

25 Sep 2014

3040-01-633-4403
Rigid Connecting Link

016334403
4F51653-105A: RNCC: 3 | RNVC: 2
4F51653: RNCC: D | RNVC: 9

21 Nov 2014

3040-01-641-4296
Mechanical Drive Housing

016414296
44107101: RNCC: 3 | RNVC: 2
44107101: RNCC: 5 | RNVC: 1

21 Jan 2015

3040-01-643-0630
Bevel-Spur Gearshaft

016430630
897625T: RNCC: 3 | RNVC: 2

18 Mar 2015

3040-01-643-7086
Shouldered Shaft

016437086
300162-2: RNCC: 3 | RNVC: 2
300111-3FIND 10: RNCC: 5 | RNVC: 2

10 Apr 2015

3040-01-644-7902
Rigid Connecting Link

016447902
8238786: RNCC: 3 | RNVC: 2
05230003: RNCC: 3 | RNVC: 9
01213479: RNCC: 5 | RNVC: 2

20 May 2015

3040-01-648-8618
Control Cam

016488618
153C6877P1: RNCC: 3 | RNVC: 2

9 Oct 2015

3040-01-648-8555
Piston Ring

016488555
27019: RNCC: 1 | RNVC: 2
27PD0572405A073: RNCC: 3 | RNVC: 2

9 Oct 2015

3040-01-650-0483
Rigid Connecting Link

016500483
212A1125-4: RNCC: 3 | RNVC: 2

18 Nov 2015

3040-01-650-8510
Linear Actuating Cylinder

016508510
DNC-80-250-PPV-A-S6: RNCC: 3 | RNVC: 2
R0154951: RNCC: 5 | RNVC: 2
R0154951: RNCC: 7 | RNVC: 2
R0154951-0300: RNCC: D | RNVC: 9

18 Dec 2015

3040-01-650-8487
Rigid Connecting Link

016508487
70106-08003-102: RNCC: 3 | RNVC: 2
70106-08003: RNCC: D | RNVC: 9

17 Dec 2015

3040-01-651-2325
Single Disk Brake

016512325
8603523-1: RNCC: 3 | RNVC: 2

11 Jan 2016

3040-01-652-9928
Linear Actuating Cylinder Piston Rod

016529928
EP-0021957: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-0199
Rigid Connecting Link

016530199
66-18315-2: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-0222
Extension Shaft

016530222
69-43973-3: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-3198
Pneumatic Actuator Cylinder Housing

016533198
EP-0021833: RNCC: 3 | RNVC: 2

18 Mar 2016

3040-01-653-4764
Mechanically Actuated Spindle

016534764
3580290: RNCC: 3 | RNVC: 2

24 Mar 2016

3040-01-654-5378
Straight Shaft Assembly

016545378
256T5710-207: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-654-4964
Straight Shaft Assembly

016544964
256T5710-105: RNCC: 3 | RNVC: 1

30 Apr 2016

3040-01-656-3965
Nonaircraft Mechanical Actuator

016563965
12222-021-000: RNCC: 3 | RNVC: 2
12222 PL ASSY: RNCC: C | RNVC: 1
12151 ITEM 1: RNCC: D | RNVC: 9

29 Jun 2016

3040-01-656-9450
Linear Actuating Cylinder Piston Rod

016569450
220-2066: RNCC: 3 | RNVC: 2

25 Jul 2016

3040-01-656-6292
Spur Gearshaft

016566292
4646.305.052: RNCC: 3 | RNVC: 2

12 Jul 2016

3040-01-658-6638
Planetary Gears Carrier

016586638
29537386: RNCC: 3 | RNVC: 2
24KP993: RNCC: 3 | RNVC: 2

11 Oct 2016

3040-01-659-3078
Nonaircraft Mechanical Actuator

016593078
12153/1S757100-040: RNCC: 3 | RNVC: 2

17 Nov 2016

3040-01-661-3284
Rigid Connecting Link

016613284
251T0100-606: RNCC: 3 | RNVC: 1

27 Feb 2017

3040-01-661-7582
Rigid Connecting Link

016617582
251T0100-323: RNCC: 3 | RNVC: 1

14 Mar 2017

3040-01-663-8286
Manual Control Lever Assembly

016638286
158770: RNCC: 3 | RNVC: 2
11.1099.007-500: RNCC: 3 | RNVC: 2

24 May 2017

3040-01-667-7627
Counterbalance Weight

016677627
50N401: RNCC: 3 | RNVC: 2

28 Oct 2017

3040-01-668-1699
Worm Wheel Gearshaft

016681699
8M0141338: RNCC: 3 | RNVC: 2
8M0103304: RNCC: 3 | RNVC: 9

13 Nov 2017

3040-01-668-6707
Mechanical Drive Housing

016686707
7662502: RNCC: 3 | RNVC: 2
7662502: RNCC: 5 | RNVC: 2
06271504: RNCC: 5 | RNVC: 9
SW325-AC-IPB-010 FIG/INDEX 36-59: RNCC: C | RNVC: 1

1 Dec 2017

3040-01-668-5277
Worm Shaft

016685277
60-420-0072-1: RNCC: 3 | RNVC: 2
01-435-0435-4 ITEM 12: RNCC: D | RNVC: 9

28 Nov 2017

3040-01-669-7654
Rigid Connecting Link

016697654
2589898-1: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-669-8549
Rigid Connecting Link

016698549
412T3210-87: RNCC: 3 | RNVC: 1

24 Jan 2018

3040-01-669-0803
Remote Control Lever

016690803
1330-1256-10: RNCC: 3 | RNVC: 2
1330-1256: RNCC: D | RNVC: 9

20 Dec 2017

3040-01-671-3321
Shaft Idler

016713321
GS-5252-4: RNCC: 3 | RNVC: 2
4367633: RNCC: 7 | RNVC: 2

22 Mar 2018

3040-01-669-4718
Counterbalance Weight

016694718
1A9720: RNCC: 3 | RNVC: 1

9 Jan 2018

3040-01-671-4247
Rigid Connecting Link

016714247
901-034-114-101: RNCC: 3 | RNVC: 2

27 Mar 2018

3040-01-672-2390
Pivot Shaft Assembly

016722390
161-093-002: RNCC: 3 | RNVC: 2
12602301: RNCC: 3 | RNVC: 2
12602301: RNCC: 7 | RNVC: 2

25 Apr 2018

3040-01-672-1805
Shaft Idler

016721805
GS-5251-3: RNCC: 3 | RNVC: 2
4345597: RNCC: 7 | RNVC: 2

24 Apr 2018

3040-01-674-9794
Linear Actuating Cylinder Assembly

016749794
450-5851: RNCC: 3 | RNVC: 2

16 Aug 2018

3040-01-675-2911
Linear Actuating Cylinder Piston Rod

016752911
AH215677: RNCC: 3 | RNVC: 2

31 Aug 2018

3040-01-679-3933
Piston Ring

016793933
4309443: RNCC: 3 | RNVC: 2

21 Mar 2019

3040-01-682-7348
Control Cable Assembly

016827348
8599190-001: RNCC: 1 | RNVC: 2
7-46224-1: RNCC: 3 | RNVC: 2

21 Aug 2019

3040-01-615-0749
Linear Actuating Cylinder Assembly

016150749
91020: RNCC: 3 | RNVC: 2

27 Dec 2012

3040-01-615-1275
Counterbalance Weight

016151275
7-5R2430112-009: RNCC: 3 | RNVC: 2

31 Dec 2012

3040-01-615-7180
Pivot Shaft Assembly

016157180
EP-0009132: RNCC: 3 | RNVC: 2

22 Jan 2013

3040-01-618-4350
Shouldered Shaft

016184350
029-9051-000: RNCC: 3 | RNVC: 2

24 Apr 2013

3040-01-609-7830
Counterbalance Weight

016097830
901-015-019-105: RNCC: 3 | RNVC: 2

2 Aug 2012

3040-01-610-4523
Manual Control Lever

016104523
2593685C1: RNCC: 3 | RNVC: 2

17 Aug 2012

3040-01-610-9674
Remote Control Lever

016109674
2ARR12002: RNCC: 3 | RNVC: 2
2ARR12002: RNCC: 3 | RNVC: 9

31 Aug 2012

3040-01-611-0367
Cylinder Support

016110367
8469068-1: RNCC: 3 | RNVC: 2

5 Sep 2012

3040-01-611-4923
Shouldered Shaft

016114923
12282405: RNCC: 3 | RNVC: 2

17 Sep 2012

3040-01-612-4686
Bell Crank

016124686
4026644: RNCC: 3 | RNVC: 2
4026644: RNCC: 5 | RNVC: 9

12 Oct 2012

3040-01-612-5931
Control Cable Assembly

016125931
E-4209-16: RNCC: 3 | RNVC: 2

16 Oct 2012

3040-01-612-5363
Mechanically Actuated Spindle

016125363
201124265-01: RNCC: 3 | RNVC: 2

13 Oct 2012

3040-01-612-9452
Rigid Connecting Link

016129452
4181786: RNCC: 1 | RNVC: 2
73191: RNCC: 3 | RNVC: 2
83229: RNCC: 5 | RNVC: 9

25 Oct 2012

3040-01-613-8129
Nonaircraft Mechanical Actuator

016138129
0112-2001: RNCC: 3 | RNVC: 2

19 Nov 2012

3040-01-623-0403
Spur Gearshaft

016230403
305-101-303-0: RNCC: 3 | RNVC: 2

30 Oct 2013

3040-01-623-1297
Manual Control Lever Assembly

016231297
539862: RNCC: 3 | RNVC: 2
539862: RNCC: 5 | RNVC: 9
PL86-75113CA7 FIG 28: RNCC: 5 | RNVC: 9

1 Nov 2013

3040-01-625-1889
Linear Actuating Cylinder Assembly

016251889
BM-2068: RNCC: 3 | RNVC: 9
J184151: RNCC: 5 | RNVC: 2
L4011600AN118: RNCC: 5 | RNVC: 9
20933DJ001 REV G FIND NO. 11: RNCC: D | RNVC: 9
1D-1335-PL REV A: RNCC: D | RNVC: 9

28 Jan 2014

3040-01-626-5746
Manual Control Lever

016265746
7010665: RNCC: 3 | RNVC: 2

14 Mar 2014

3040-01-626-5037
Hub Clamp

016265037
8475527: RNCC: 3 | RNVC: 2

12 Mar 2014

3040-01-628-3888
Control Cam

016283888
8288015: RNCC: 3 | RNVC: 2

21 May 2014

3040-01-629-3419
Straight Axle

016293419
NC05026: RNCC: 3 | RNVC: 2

26 Jun 2014

3040-01-632-4565
Straight Shaft

016324565
8974K18: RNCC: 3 | RNVC: 2

20 Oct 2014

3040-01-642-0769
Electrical-Fluid Pressure Connector Assembly

016420769
CD16AR-BE: RNCC: 3 | RNVC: 2
1.691.1600.15: RNCC: 5 | RNVC: 9

11 Feb 2015

3040-01-644-5835
Straight Shaft

016445835
4631-39: RNCC: 3 | RNVC: 2

13 May 2015

3040-01-644-9853
Control Cable Assembly

016449853
B-4-3: RNCC: 3 | RNVC: 2

29 May 2015

3040-01-646-1670
Mechanically Actuated Spindle

016461670
D-WK-879-39-9: RNCC: 3 | RNVC: 2
D-WK-879-39 REV D PC# 9: RNCC: C | RNVC: 1

14 Jul 2015

3040-01-646-8407
Housing Adapter

016468407
3780104: RNCC: 3 | RNVC: 2
CSAS: RNCC: 5 | RNVC: 9

31 Jul 2015

3040-01-646-3853
Rigid Connecting Link

016463853
23149-1: RNCC: 3 | RNVC: 2

21 Jul 2015

3040-01-646-8831
Pneumatic Rotor Vane

016468831
TCR137102123: RNCC: 3 | RNVC: 2
EDOC0135 REV 2 ITEM 40: RNCC: C | RNVC: 1

3 Aug 2015

3040-01-647-2461
Linear Actuating Cylinder

016472461
EP-0021224: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-648-6438
Spur Gearshaft

016486438
0936480000: RNCC: 3 | RNVC: 2
SKD168962 ITEM 30: RNCC: 5 | RNVC: 2

30 Sep 2015

3040-01-650-3103
Linear Actuating Cylinder Assembly

016503103
333/E3509: RNCC: 3 | RNVC: 2
333/E3509: RNCC: 5 | RNVC: 2

27 Nov 2015

3040-01-652-9927
Linear Actuating Cylinder Piston Rod

016529927
EP-0021718: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-651-8653
Manual Control Lever

016518653
4C27203-101B: RNCC: 3 | RNVC: 2

2 Feb 2016

3040-01-653-0246
Rigid Connecting Link

016530246
69-73863-1: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-654-2104
Rigid Connecting Link

016542104
273T4539-1: RNCC: 3 | RNVC: 1

20 Apr 2016

3040-01-654-7745
Load Limiter Assembl

016547745
257T3011-1: RNCC: 3 | RNVC: 1

9 May 2016

3040-01-655-4607
Shouldered Shaft

016554607
0625-09-0115-01: RNCC: 3 | RNVC: 2

27 May 2016

3040-01-655-9442
Shouldered Shaft

016559442
1-101257-M: RNCC: 3 | RNVC: 2
1-101257-M: RNCC: 5 | RNVC: 2
N0083: RNCC: D | RNVC: 9

13 Jun 2016

3040-01-656-5051
Manual Control Lever

016565051
11247: RNCC: 3 | RNVC: 2

6 Jul 2016

3040-01-656-5365
Piston Ring

016565365
ZF1296312053: RNCC: 3 | RNVC: 2
1296.312.053: RNCC: 5 | RNVC: 9

7 Jul 2016

3040-01-656-6260
Control Cam

016566260
440G-A27011: RNCC: 3 | RNVC: 2
440G-A27011: RNCC: 5 | RNVC: 9

12 Jul 2016

3040-01-657-8941
Linear Actuating Cylinder

016578941
6E-5025: RNCC: 3 | RNVC: 2

2 Sep 2016

3040-01-658-6252
Rigid Connecting Link

016586252
12581642: RNCC: 3 | RNVC: 2

6 Oct 2016

3040-01-661-0643
Housing Adapter

016610643
6631847-1: RNCC: 3 | RNVC: 2

15 Feb 2017

3040-01-664-0085
Rigid Connecting Link

016640085
2814630-1: RNCC: 3 | RNVC: 2

1 Jun 2017

3040-01-663-7205
Brake Backing Plate

016637205
291J1: RNCC: 3 | RNVC: 2

19 May 2017

3040-01-666-1628
Shouldered Shaft

016661628
8M0141337: RNCC: 3 | RNVC: 2
8M0103303: RNCC: 5 | RNVC: 9

28 Aug 2017

3040-01-666-1685
Belt-Chain Tension Adjusting Device

016661685
8M0101707: RNCC: 3 | RNVC: 2

28 Aug 2017

3040-01-667-6579
Counterbalance Weight

016676579
14001878: RNCC: 3 | RNVC: 2

25 Oct 2017

3040-01-668-8646
Tension Spring Assembly

016688646
J-12-4-11: RNCC: 3 | RNVC: 2
617240001 FIND NO 21: RNCC: D | RNVC: 9

11 Dec 2017

3040-01-669-3635
Rigid Connecting Link

016693635
108757-1: RNCC: 3 | RNVC: 2
H2177: RNCC: 5 | RNVC: 9

8 Jan 2018

3040-01-669-5213
Counterbalance Weight

016695213
393514CL4: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-669-9558
Control Cable Assembly

016699558
VT7301G100: RNCC: 3 | RNVC: 2

30 Jan 2018

3040-01-671-3265
Ball Joint

016713265
B0000373: RNCC: 3 | RNVC: 2

22 Mar 2018

3040-01-671-3140
Rigid Connecting Link

016713140
10062622: RNCC: 3 | RNVC: 2

22 Mar 2018

3040-01-674-9872
Control Cam

016749872
11916470: RNCC: 3 | RNVC: 2
16405132 ITEM 14: RNCC: 5 | RNVC: 2

17 Aug 2018

3040-01-676-8953
Rigid Connecting Link

016768953
12608401: RNCC: 3 | RNVC: 2
12608401: RNCC: 5 | RNVC: 2

19 Nov 2018

3040-01-676-9013
Rigid Connecting Link

016769013
12608402: RNCC: 3 | RNVC: 2
12608402: RNCC: 3 | RNVC: 2

19 Nov 2018

3040-01-676-9975
Shouldered Shaft

016769975
68490: RNCC: 3 | RNVC: 2
60563 FN 20: RNCC: D | RNVC: 9

21 Nov 2018

3040-01-677-6908
Shaft Collar

016776908
269A5178-017: RNCC: 3 | RNVC: 9
269D5718-017: RNCC: 5 | RNVC: 9

31 Dec 2018

3040-01-679-1963
Shouldered Shaft

016791963
3Z40184-011NM: RNCC: 3 | RNVC: 2
40200 (NPS 14) ITEM 41: RNCC: 5 | RNVC: 2
40200: RNCC: D | RNVC: 9

13 Mar 2019

3040-01-681-6308
Ratio Link

016816308
120-33851: RNCC: 3 | RNVC: 2
120-33851: RNCC: 5 | RNVC: 9

26 Jun 2019

3040-01-687-9425
Rigid Connecting Link

016879425
W-NR-07-00: RNCC: 3 | RNVC: 2

27 Apr 2020

3040-01-688-1587
Shouldered Shaft

016881587
413-10663-1: RNCC: 3 | RNVC: 2

6 May 2020

3040-01-696-7724
Nonrotating Shaft Eye Bracket

016967724
845-7526223-4-82: RNCC: 3 | RNVC: 2

17 Aug 2021

3040-01-619-9333
Shaft Collar

016199333
210253: RNCC: 3 | RNVC: 2

24 Jun 2013

3040-01-620-2841
Helical-Spur Gearshaft

016202841
185-5565: RNCC: 3 | RNVC: 2

16 Jul 2013

3040-01-630-1960
Rigid Connecting Link

016301960
209-062-758-131: RNCC: 3 | RNVC: 2

28 Jul 2014

3040-01-630-5763
Straight Shaft Assembly

016305763
PAAI031972: RNCC: 3 | RNVC: 2
DAAK105738 SEQ 014: RNCC: 5 | RNVC: 2

11 Aug 2014

3040-01-653-1102
Pneumatic Actuator Cylinder Housing

016531102
EP-0021956: RNCC: 3 | RNVC: 2

11 Mar 2016

3040-01-653-1624
Pawl

016531624
C923A0050RT: RNCC: 3 | RNVC: 9
C50893 PC NO 42: RNCC: C | RNVC: 1
C50893: RNCC: D | RNVC: 9

14 Mar 2016

3040-01-617-6301
Straight Axle

016176301
2ABR12017: RNCC: 3 | RNVC: 2
2ABR12017: RNCC: 3 | RNVC: 9

28 Mar 2013

3040-01-617-3252
Rigid Connecting Link

016173252
1308M32G07: RNCC: 3 | RNVC: 2
1308M32G07: RNCC: 5 | RNVC: 2

19 Mar 2013

3040-01-617-9795
Breather

016179795
209001-01: RNCC: 3 | RNVC: 2
209001-01: RNCC: C | RNVC: 1

9 Apr 2013

3040-01-617-2439
Rigid Connecting Link

016172439
1308M32G01: RNCC: 3 | RNVC: 2
1308M32G01: RNCC: 5 | RNVC: 2

16 Mar 2013

3040-01-620-4012
Remote Control Lever

016204012
185-5702: RNCC: 3 | RNVC: 2

22 Jul 2013

3040-01-609-1285
Shaft Idler

016091285
02/912573: RNCC: 3 | RNVC: 2

17 Jul 2012

3040-01-613-7357
Belt-Chain Tension Adjusting Device

016137357
89438: RNCC: 3 | RNVC: 2

15 Nov 2012

3040-01-613-2022
Rigid Connecting Link

016132022
7664337/KRF 4200: RNCC: 1 | RNVC: 2
KRF 4200: RNCC: 3 | RNVC: 2

1 Nov 2012

3040-01-614-6382
Piston Ring

016146382
PYLB147: RNCC: 3 | RNVC: 2

11 Dec 2012

3040-01-624-0155
Counterbalance Weight

016240155
9319M30P12: RNCC: 3 | RNVC: 2

11 Dec 2013

3040-01-624-0697
Counterbalance Weight

016240697
9319M30P09: RNCC: 3 | RNVC: 2

14 Dec 2013

3040-01-625-6522
Linear Actuating Cylinder Assembly

016256522
4012251: RNCC: 1 | RNVC: 2
121461B: RNCC: 3 | RNVC: 2
4012251: RNCC: 5 | RNVC: 9

11 Feb 2014

3040-01-626-6183
Shouldered Shaft

016266183
8555396: RNCC: 3 | RNVC: 2

18 Mar 2014

3040-01-627-0113
Straight Shaft

016270113
4994603: RNCC: 3 | RNVC: 2

28 Mar 2014

3040-01-627-0505
Shouldered Shaft Assembly

016270505
29558949: RNCC: 3 | RNVC: 2
29548947: RNCC: 3 | RNVC: 9

31 Mar 2014

3040-01-627-0637
Counterbalance Weight

016270637
8475529: RNCC: 3 | RNVC: 2

1 Apr 2014

3040-01-627-1971
Nonaircraft Mechanical Actuator

016271971
KFS4730-LA36-ACT: RNCC: 3 | RNVC: 2
12538913: RNCC: 7 | RNVC: 2

4 Apr 2014

3040-01-627-9398
Rigid Connecting Link

016279398
14003617: RNCC: 3 | RNVC: 2
14003617: RNCC: 3 | RNVC: 9

2 May 2014

3040-01-628-4286
Linear Actuating Cylinder Assembly

016284286
5373-1: RNCC: 3 | RNVC: 2
5373-1: RNCC: 7 | RNVC: 2

23 May 2014

3040-01-631-0981
Rigid Connecting Link

016310981
27M-282: RNCC: 3 | RNVC: 2

29 Aug 2014

3040-01-629-9600
Straight Shaft

016299600
27M-248-2: RNCC: 3 | RNVC: 2
EACD-824MF1-3W-HB-ITEM3: RNCC: C | RNVC: 1

21 Jul 2014

3040-01-630-0170
Mechanical Drive Housing

016300170
880686T25: RNCC: 3 | RNVC: 2

23 Jul 2014

3040-01-632-3578
Straight Shaft

016323578
300034-3: RNCC: 3 | RNVC: 2
300184ITEM4: RNCC: 5 | RNVC: 2

16 Oct 2014

3040-01-630-3933
Spline Adapter

016303933
45M-836: RNCC: 3 | RNVC: 2
EACD-824MF1-3W-HB-ITEM2: RNCC: 5 | RNVC: 2

1 Aug 2014

3040-01-633-1729
Remote Control Lever

016331729
9720-15: RNCC: 3 | RNVC: 2

12 Nov 2014

3040-01-641-7043
Planetary Gears Carrier

016417043
29547414: RNCC: 3 | RNVC: 2

29 Jan 2015

3040-01-641-7462
Linear Actuating Cylinder Assembly

016417462
MIL-001-203: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-642-1572
Linear Actuating Cylinder Piston Rod

016421572
201309308-01: RNCC: 3 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2

14 Feb 2015

3040-01-645-4140
Sheave Pin

016454140
F160295: RNCC: 3 | RNVC: 2
F160402 ITEM 3: RNCC: C | RNVC: 1

15 Jun 2015

3040-01-645-4412
Shaft Collar

016454412
CL5 SS: RNCC: 3 | RNVC: 2

16 Jun 2015

3040-01-644-2207
Extension Shaft

016442207
MT-EXT: RNCC: 3 | RNVC: 2

27 Apr 2015

3040-01-646-0936
Tension Spring Assembly

016460936
12543058: RNCC: 3 | RNVC: 2

13 Jul 2015

3040-01-646-9089
Brake Disc

016469089
TCR426224430: RNCC: 3 | RNVC: 2
EDOC0135 REV 2 ITEM 73: RNCC: C | RNVC: 1

4 Aug 2015

3040-01-647-1790
Linear Actuating Cylinder

016471790
EP-0021213: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-647-3448
Shouldered Shaft

016473448
7-4648-3: RNCC: 3 | RNVC: 2

19 Aug 2015

3040-01-647-7577
Straight Shaft

016477577
20-1312-84-20: RNCC: 3 | RNVC: 2
20-1312-84-23: RNCC: 5 | RNVC: 9

31 Aug 2015

3040-01-649-7409
Control Pedal Assembly

016497409
12580271: RNCC: 3 | RNVC: 2

9 Nov 2015

3040-01-652-8234
Spur Gearshaft

016528234
67411643-1: RNCC: 3 | RNVC: 2
67411643-1: RNCC: 5 | RNVC: 2

4 Mar 2016

3040-01-652-9926
Linear Actuating Cylinder Piston Rod

016529926
EP-0021832: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-654-4200
Straight Shaft Assembly

016544200
256T5710-215: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-654-4242
Straight Shaft Assembly

016544242
256T5710-131: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-653-3157
Pneumatic Actuator Cylinder Housing

016533157
EP-0021967: RNCC: 3 | RNVC: 2

18 Mar 2016

3040-01-656-2790
Control Cam

016562790
593-7067139-281: RNCC: 3 | RNVC: 2
H577-3302-281: RNCC: 5 | RNVC: 2

23 Jun 2016

3040-01-655-1893
Mechanical Drive Housing

016551893
8294A16: RNCC: 3 | RNVC: 2

20 May 2016

3040-01-656-5528
Shouldered Shaft

016565528
ZF4646.355.046: RNCC: 3 | RNVC: 9
4646.355.046: RNCC: 5 | RNVC: 9

8 Jul 2016

3040-01-658-3858
Rigid Connecting Link

016583858
250N2004-1124: RNCC: 3 | RNVC: 2

23 Sep 2016

3040-01-658-1452
Linear Actuating Cylinder Assembly

016581452
3871090: RNCC: 3 | RNVC: 2
M16100: RNCC: 3 | RNVC: 2

14 Sep 2016

3040-01-659-3081
Piston Ring

016593081
ZF0899317869: RNCC: 3 | RNVC: 2
0899.317.869: RNCC: 3 | RNVC: 9
ZF0899317869: RNCC: 5 | RNVC: 2
0899.317.869: RNCC: 5 | RNVC: 9

17 Nov 2016

3040-01-661-0852
Nonaircraft Mechanical Actuator

016610852
S753300108-03: RNCC: 3 | RNVC: 2
663588 FIND NO. 6: RNCC: C | RNVC: 1
663588: RNCC: D | RNVC: 9

15 Feb 2017

3040-01-662-1088
Control Cam

016621088
617227018: RNCC: 3 | RNVC: 2
617257007 REV - FIND NO 5: RNCC: 5 | RNVC: 2

27 Mar 2017

3040-01-662-6252
Rigid Connecting Link

016626252
747049K01: RNCC: 3 | RNVC: 2
747049-K1: RNCC: 3 | RNVC: 9

13 Apr 2017

3040-01-662-3393
Straight Shaft

016623393
6653110-1: RNCC: 3 | RNVC: 2

4 Apr 2017

3040-01-666-0618
Pawl

016660618
1103-1937-01: RNCC: 3 | RNVC: 2

22 Aug 2017

3040-01-664-9394
Straight Shaft

016649394
EP-0001586: RNCC: 3 | RNVC: 2
9238280767: RNCC: 5 | RNVC: 9

12 Jul 2017

3040-01-669-7848
Pointer Shaft

016697848
BB-8002340-1: RNCC: 3 | RNVC: 2

22 Jan 2018

3040-01-670-5648
Gear Pin Hub

016705648
071-1542787: RNCC: 3 | RNVC: 2

27 Feb 2018

3040-01-672-9037
Spur Gearshaft

016729037
12602049: RNCC: 3 | RNVC: 2
12602049: RNCC: 3 | RNVC: 2

22 May 2018

3040-01-675-0768
Rigid Connecting Link

016750768
HJ109215: RNCC: 3 | RNVC: 2

21 Aug 2018

3040-01-675-3102
Nonaircraft Mechanical Actuator

016753102
378-1020: RNCC: 3 | RNVC: 2

4 Sep 2018

3040-01-677-3830
Manual Control Lever Assembly

016773830
352 9100 110: RNCC: 3 | RNVC: 9

11 Dec 2018

3040-01-677-6856
Shouldered Shaft

016776856
901-211-001-113: RNCC: 3 | RNVC: 2
901-211-001: RNCC: D | RNVC: 9

28 Dec 2018

3040-01-678-7235
Manual Control Lever

016787235
BB-8007800-1: RNCC: 3 | RNVC: 2

22 Feb 2019

3040-01-678-7801
Extension Shaft

016787801
2X36-HSL: RNCC: 3 | RNVC: 2

26 Feb 2019

3040-01-683-0000
Nonrotating Shaft Eye Bracket

016830000
3890AS004514-01: RNCC: 3 | RNVC: 2
3890AS004514-01: RNCC: 5 | RNVC: 2

4 Sep 2019

3040-01-686-2916
Shouldered Shaft

016862916
36-3724: RNCC: 3 | RNVC: 2

6 Feb 2020

3040-01-686-3676
Shouldered Shaft

016863676
596-7410506-PN-13: RNCC: 3 | RNVC: 2
596-7410504-PN-10: RNCC: 5 | RNVC: 2
B434-5217-PN-10: RNCC: 5 | RNVC: 2
B434-5219-PN-13: RNCC: 5 | RNVC: 2
596-7410504: RNCC: D | RNVC: 9
596-7410506: RNCC: D | RNVC: 9

11 Feb 2020

3040-01-685-8112
Shaft And Tube Support Assembly

016858112
09203014-01: RNCC: 3 | RNVC: 2

14 Jan 2020

3040-01-689-4732
Flexible Drive Shaft

016894732
BB-8006882-1: RNCC: 3 | RNVC: 2

23 Jun 2020

3040-01-693-4951
Extension Shaft

016934951
MK-PVBG1K1342: RNCC: 3 | RNVC: 2

17 Feb 2021

3040-01-696-1257
Brake Backing Plate

016961257
H250T1-6000-4LH: RNCC: 3 | RNVC: 2

12 Jul 2021

3040-01-615-1479
Counterbalance Weight

016151479
7-5R2430113-001: RNCC: 3 | RNVC: 2

2 Jan 2013

3040-01-617-6938
Hub Clamp

016176938
AX0772-24-SP: RNCC: 3 | RNVC: 2
LN0000641: RNCC: C | RNVC: 1

1 Apr 2013

3040-01-619-6993
Shaft Collar

016196993
6432K26: RNCC: 3 | RNVC: 2

13 Jun 2013

3040-01-620-4442
Shaft Collar

016204442
185-5582: RNCC: 3 | RNVC: 2
185-7407: RNCC: 5 | RNVC: 9

24 Jul 2013

3040-01-621-9844
Shaft Collar

016219844
064-52697-000: RNCC: 3 | RNVC: 2
364-51396-000ITEM30: RNCC: 5 | RNVC: 2

24 Sep 2013

3040-01-608-4850
Sheave Shaft

016084850
3491AS0772-1: RNCC: 3 | RNVC: 2
3491AS0772-1: RNCC: 5 | RNVC: 2
3491AS0772-1: RNCC: 5 | RNVC: 2
3491AS0772-1: RNCC: 5 | RNVC: 9

28 Jun 2012

3040-01-610-1474
Hose Reel Brake Wheel Assembly

016101474
391427-DFARS-PP: RNCC: 3 | RNVC: 2
MIL-R-15917-IV-BR-MILGP IT NO 11: RNCC: 5 | RNVC: 2
MIL-R-15917-IV-BR-MILGP: RNCC: D | RNVC: 9

10 Aug 2012

3040-01-611-5497
Shaft Collar

016115497
12282409: RNCC: 3 | RNVC: 2

18 Sep 2012

3040-01-611-9216
Linear Actuating Cylinder Assembly

016119216
MCTI-030-0960-10: RNCC: 3 | RNVC: 9

27 Sep 2012

3040-01-612-3196
Counterbalance Weight

016123196
12522198: RNCC: 3 | RNVC: 2

9 Oct 2012

3040-01-612-4028
Bell Crank

016124028
4026643: RNCC: 3 | RNVC: 2
4026643: RNCC: 5 | RNVC: 9

10 Oct 2012

3040-01-613-0103
Nonaircraft Mechanical Actuator

016130103
340805024P: RNCC: 3 | RNVC: 2
340805024P: RNCC: 3 | RNVC: 9

27 Oct 2012

3040-01-613-1027
Linear Actuating Cylinder Head

016131027
114310-11020: RNCC: 3 | RNVC: 9
114310-11020: RNCC: 5 | RNVC: 2

30 Oct 2012

3040-01-613-1856
Rigid Connecting Link

016131856
269A1335-007: RNCC: 3 | RNVC: 2
269A1335-007: RNCC: 3 | RNVC: 9
269A1335-007: RNCC: 5 | RNVC: 9
269A1335-007: RNCC: 5 | RNVC: 9
269A1335-007: RNCC: 5 | RNVC: 9

1 Nov 2012

3040-01-623-0409
Rigid Connecting Link

016230409
803-6397268 PC 168: RNCC: 3 | RNVC: 2
803-6397269 ASSY M-2: RNCC: 5 | RNVC: 2
803-6397268: RNCC: D | RNVC: 9
803-6397269: RNCC: D | RNVC: 9

30 Oct 2013

3040-01-622-9847
Linear Actuating Cylinder Assembly

016229847
755001058A01: RNCC: 3 | RNVC: 2

28 Oct 2013

3040-01-625-3929
Hex Cartridge

016253929
ST4-014: RNCC: 3 | RNVC: 2

3 Feb 2014

3040-01-627-1860
Spline Adapter

016271860
P18407P1: RNCC: 3 | RNVC: 2

4 Apr 2014

3040-01-629-2067
Straight Shaft

016292067
820201-4: RNCC: 3 | RNVC: 2
820201-4: RNCC: 3 | RNVC: 9

23 Jun 2014

3040-01-630-6315
Rigid Connecting Link

016306315
25078-#2ZC: RNCC: 3 | RNVC: 2
4292315: RNCC: 5 | RNVC: 2
4292315: RNCC: 5 | RNVC: 2

12 Aug 2014

3040-01-631-3293
Nonaircraft Mechanical Actuator

016313293
IC34.08.05.011H: RNCC: 3 | RNVC: 2
IC34.08.05.011H: RNCC: 3 | RNVC: 9
H5BH16104631307K: RNCC: 5 | RNVC: 9

10 Sep 2014

3040-01-641-5633
Mechanical Drive Housing

016415633
814155-1: RNCC: 3 | RNVC: 2

26 Jan 2015

3040-01-641-5923
Rigid Connecting Link

016415923
D-WK-879-67-25: RNCC: 3 | RNVC: 2
D-WK-879-67 REV G PC# 25: RNCC: 5 | RNVC: 2
D-WK-879-67: RNCC: D | RNVC: 9

27 Jan 2015

3040-01-643-4917
Control Cam

016434917
845-7285216-56: RNCC: 3 | RNVC: 2
2643-751-01-56: RNCC: 5 | RNVC: 2

3 Apr 2015

3040-01-643-9773
Housing Adapter

016439773
4300301: RNCC: 3 | RNVC: 2
3695172: RNCC: 5 | RNVC: 9

17 Apr 2015

3040-01-645-6058
Control Cam

016456058
C5M29821: RNCC: 3 | RNVC: 2

23 Jun 2015

3040-01-646-9662
Shouldered Shaft

016469662
LPE-14K-EC124-01: RNCC: 3 | RNVC: 2
F160217: RNCC: 5 | RNVC: 2
F160216 ITEM 4: RNCC: 5 | RNVC: 9

6 Aug 2015

3040-01-647-1796
Linear Actuating Cylinder Head

016471796
EP-0021215: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-645-4638
Friction Lining

016454638
2311105-1: RNCC: 3 | RNVC: 2

17 Jun 2015

3040-01-647-7189
Mechanical Drive Housing Part

016477189
7-4625-6: RNCC: 3 | RNVC: 2
7-4625-5: RNCC: 5 | RNVC: 9

31 Aug 2015

3040-01-648-1118
Hydraulic Accumulator Cylinder

016481118
GG775794A0: RNCC: 3 | RNVC: 2
1H000000107: RNCC: 5 | RNVC: 2
GG775794A0 REV B: RNCC: 5 | RNVC: 2

15 Sep 2015

3040-01-647-0564
Hydraulic Accumulator Cylinder

016470564
CD23073501: RNCC: 3 | RNVC: 2
12542702: RNCC: 7 | RNVC: 2
BH-0895: RNCC: E | RNVC: 8
12505535: RNCC: E | RNVC: 8

10 Aug 2015

3040-01-649-3160
Linear Actuating Cylinder Assembly

016493160
3969538: RNCC: 3 | RNVC: 2
M16699: RNCC: 5 | RNVC: 2
3969538: RNCC: 5 | RNVC: 2
3969538: RNCC: 5 | RNVC: 9

26 Oct 2015

3040-01-649-6283
Shouldered Shaft Assembly

016496283
12580272: RNCC: 3 | RNVC: 2

5 Nov 2015

3040-01-648-5847
Linear Actuating Cylinder

016485847
HF610020320: RNCC: 3 | RNVC: 9
HF610020320: RNCC: 5 | RNVC: 2
HF610020320: RNCC: 5 | RNVC: 9

29 Sep 2015

3040-01-652-6693
Shouldered Shaft

016526693
3905081C91: RNCC: 3 | RNVC: 2

1 Mar 2016

3040-01-653-0717
Rigid Connecting Link

016530717
116A7391-9: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-3278
Hydraulic Control Receiver-Transmitter

016533278
1122493: RNCC: 3 | RNVC: 1
S270T245-3: RNCC: 7 | RNVC: 2

19 Mar 2016

3040-01-654-2567
Ball Joint

016542567
6058K73: RNCC: 3 | RNVC: 2
12595521: RNCC: D | RNVC: 9

22 Apr 2016

3040-01-654-2761
Spur Gearshaft

016542761
518-5940648 ITEM 174: RNCC: 3 | RNVC: 2
20410-414 ITEM 174: RNCC: 5 | RNVC: 2

22 Apr 2016

3040-01-654-6398
Linear Actuating Cylinder Piston Rod

016546398
EP-0021717: RNCC: 3 | RNVC: 2

4 May 2016

3040-01-656-0367
Control Cam

016560367
3972AS330-1: RNCC: 3 | RNVC: 2

15 Jun 2016

3040-01-656-2680
Control Cam

016562680
5006475: RNCC: 3 | RNVC: 2

23 Jun 2016

3040-01-654-7622
Grease Cap

016547622
6396: RNCC: 3 | RNVC: 2

9 May 2016

3040-01-656-3295
Shouldered Shaft

016563295
ZF4646308013: RNCC: 3 | RNVC: 2
4646.308.013: RNCC: 5 | RNVC: 9
4646.308.013: RNCC: D | RNVC: 9

27 Jun 2016

3040-01-656-5313
Spur Gearshaft

016565313
4646.305.053: RNCC: 3 | RNVC: 2

7 Jul 2016

3040-01-656-6060
Linear Actuating Cylinder Piston

016566060
EP-0019827: RNCC: 3 | RNVC: 2
KALM014015600P1: RNCC: 5 | RNVC: 9

11 Jul 2016

3040-01-657-2057
Rigid Connecting Link

016572057
75A753155-9ADA: RNCC: 3 | RNVC: 2
75A753155-9ADA: RNCC: 5 | RNVC: 2

3 Aug 2016

3040-01-657-8813
Linear Actuating Cylinder Assembly

016578813
A2D-20-B: RNCC: 3 | RNVC: 2
A2D-20-B: RNCC: 3 | RNVC: 2
4253902: RNCC: 7 | RNVC: 2

1 Sep 2016

3040-01-658-0551
Linear Actuating Cylinder Assembly

016580551
M17420: RNCC: 3 | RNVC: 2
4100553: RNCC: 7 | RNVC: 2

12 Sep 2016

3040-01-660-3831
Breather

016603831
39131: RNCC: 3 | RNVC: 2
02080980: RNCC: 3 | RNVC: 9
39131: RNCC: 5 | RNVC: 2

19 Jan 2017

3040-01-661-9240
Hydraulic Accumulator

016619240
MB22423: RNCC: 3 | RNVC: 2

21 Mar 2017

3040-01-662-5923
Housing Adapter

016625923
231136: RNCC: 3 | RNVC: 2
231136: RNCC: 5 | RNVC: 2

12 Apr 2017

3040-01-663-5060
Lever Coil

016635060
S2X-6123H: RNCC: 3 | RNVC: 2

11 May 2017

3040-01-667-4286
Rigid Connecting Link

016674286
5147T51G01: RNCC: 3 | RNVC: 2

17 Oct 2017

3040-01-667-6874
Straight Shaft

016676874
14001338: RNCC: 3 | RNVC: 2

26 Oct 2017

3040-01-668-4047
Manual Control Lever

016684047
5904-21: RNCC: 3 | RNVC: 2

21 Nov 2017

3040-01-668-6895
Control Cam

016686895
7662489: RNCC: 3 | RNVC: 2
03053029: RNCC: 5 | RNVC: 2
7662489: RNCC: 5 | RNVC: 2
SW325-AC-1PB-010 FIG/INDEX 36-32: RNCC: C | RNVC: 1

4 Dec 2017

3040-01-668-8728
Housing Adapter

016688728
248-8592622 FN 201: RNCC: 3 | RNVC: 2
SNW 3026X4.1/2: RNCC: 3 | RNVC: 2
Z-7045 FN 12: RNCC: 3 | RNVC: 2
248-8592622: RNCC: D | RNVC: 9

11 Dec 2017

3040-01-669-2614
Extension Shaft

016692614
4999-9068: RNCC: 3 | RNVC: 2
4999-9068: RNCC: 3 | RNVC: 2

3 Jan 2018

3040-01-669-5128
Counterbalance Weight

016695128
393514CL7: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-669-5156
Counterbalance Weight

016695156
393514CL6: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-670-4769
Brake Disc

016704769
98006A0625M1: RNCC: 3 | RNVC: 2

23 Feb 2018

3040-01-670-3587
Straight Shaft

016703587
87011A0623M1: RNCC: 3 | RNVC: 2

20 Feb 2018

3040-01-672-3035
Linear Actuating Cylinder Piston Rod

016723035
P528135: RNCC: 3 | RNVC: 2
DU500041389 ITEM 19: RNCC: D | RNVC: 9

26 Apr 2018

3040-01-676-1230
Ball Joint

016761230
SPAL4008921: RNCC: 3 | RNVC: 2

12 Oct 2018

3040-01-671-5289
Counterbalance Weight

016715289
530-000090-000: RNCC: 3 | RNVC: 2
530-000090-000: RNCC: 5 | RNVC: 2

2 Apr 2018

3040-01-680-9496
Straight Shaft

016809496
700069C00: RNCC: 3 | RNVC: 2

29 May 2019

3040-01-681-4176
Straight Shaft

016814176
6525743: RNCC: 3 | RNVC: 2
6525713: RNCC: D | RNVC: 9

17 Jun 2019

3040-01-684-3778
Rigid Connecting Link

016843778
201334721: RNCC: 3 | RNVC: 2

31 Oct 2019

3040-01-692-8981
Multiple Gears Gearshaft

016928981
8592279-102: RNCC: 3 | RNVC: 2
311-8592279: RNCC: D | RNVC: 9

15 Jan 2021

3040-01-693-8198
Rigid Connecting Link

016938198
69B90018-1: RNCC: 3 | RNVC: 1

6 Mar 2021

3040-01-615-0655
Counterbalance Weight

016150655
7-5R2430112-005: RNCC: 3 | RNVC: 2

26 Dec 2012

3040-01-615-3589
Shouldered Axle

016153589
MTM-10117: RNCC: 3 | RNVC: 2
12522561: RNCC: D | RNVC: 9

10 Jan 2013

3040-01-617-6137
Shouldered Shaft

016176137
1362621: RNCC: 3 | RNVC: 2
1362621: RNCC: 5 | RNVC: 2

28 Mar 2013

3040-01-618-8757
Segmented Rotor Brake

016188757
RTR-10-SS: RNCC: 3 | RNVC: 9
ROTOR-10-SS: RNCC: 5 | RNVC: 9

9 May 2013

3040-01-619-6464
Shouldered Shaft

016196464
43042-00304-2: RNCC: 3 | RNVC: 2

11 Jun 2013

3040-01-619-7873
Straight Shaft

016197873
185-5703: RNCC: 3 | RNVC: 2

18 Jun 2013

3040-01-619-7706
Worm Wheel Gearshaft

016197706
43042-00306-2: RNCC: 3 | RNVC: 2

17 Jun 2013

3040-01-611-4202
Straight Shaft

016114202
12279022: RNCC: 3 | RNVC: 2

13 Sep 2012

3040-01-612-5949
Control Cam

016125949
4026670: RNCC: 3 | RNVC: 2
4026670: RNCC: 5 | RNVC: 9

16 Oct 2012

3040-01-623-3805
Linear Actuating Cylinder Assembly

016233805
JNA050: RNCC: 3 | RNVC: 2
JNA050 ITEM NO. 6: RNCC: 5 | RNVC: 2
JNA055: RNCC: D | RNVC: 9

12 Nov 2013

3040-01-623-1858
Linear Actuating Cylinder Assembly

016231858
FS0100.NU40CWALT.NL19SKA.00XX: RNCC: 3 | RNVC: 2
ES0100.U1A04.19K0: RNCC: 5 | RNVC: 9
DOC.41.EDN REV E: RNCC: 5 | RNVC: 9

4 Nov 2013

3040-01-624-0165
Counterbalance Weight

016240165
9319M30P10: RNCC: 3 | RNVC: 2

11 Dec 2013

3040-01-625-2243
Shaft Collar

016252243
12528487: RNCC: 3 | RNVC: 2
12528487: RNCC: 5 | RNVC: 2
12528487: RNCC: D | RNVC: 9

29 Jan 2014

3040-01-626-9502
Transmission Sleeve

016269502
8475528: RNCC: 3 | RNVC: 2

26 Mar 2014

3040-01-628-1340
Shouldered Shaft

016281340
6759SL: RNCC: 3 | RNVC: 2
19KP786: RNCC: 5 | RNVC: 2

9 May 2014

3040-01-628-2402
Mechanically Actuated Spindle

016282402
167-8200543 ITEM NO 28: RNCC: 3 | RNVC: 2
167-8278258: RNCC: 5 | RNVC: 1

15 May 2014

3040-01-632-5449
Piston Ring

016325449
N72184: RNCC: 3 | RNVC: 2
38981N-2-C-C-17: RNCC: 5 | RNVC: 2

23 Oct 2014

3040-01-641-7490
Guide Shoe

016417490
MIL-001-1047: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-642-7970
Rigid Connecting Link

016427970
5362-243: RNCC: 3 | RNVC: 2

10 Mar 2015

3040-01-642-9264
Shouldered Shaft

016429264
7377567: RNCC: 3 | RNVC: 2
7225837 ITEM 1: RNCC: C | RNVC: 1

13 Mar 2015

3040-01-644-2137
Piston Ring

016442137
104716-1: RNCC: 3 | RNVC: 2
500040 ITEM NO. 7 P/N 104716-1: RNCC: C | RNVC: 1
500040: RNCC: D | RNVC: 9

27 Apr 2015

3040-01-645-7672
Shouldered Shaft

016457672
13045799: RNCC: 3 | RNVC: 2

26 Jun 2015

3040-01-647-3408
Rigid Connecting Link

016473408
7-1403-8: RNCC: 3 | RNVC: 2
7-1403-7: RNCC: 3 | RNVC: 9

18 Aug 2015

3040-01-648-6031
Mechanical Drive Housing Part

016486031
X00E50210046: RNCC: 3 | RNVC: 2
X00E50202753/S0003: RNCC: 3 | RNVC: 9
X00E50202753/S0003: RNCC: 5 | RNVC: 2
X00E50202753/S0003: RNCC: 5 | RNVC: 9

29 Sep 2015

3040-01-648-8104
Rigid Connecting Link

016488104
2AYG12019: RNCC: 3 | RNVC: 2
2AYG12019: RNCC: 5 | RNVC: 9

7 Oct 2015

3040-01-649-5924
Rigid Connecting Link

016495924
12580280-4: RNCC: 3 | RNVC: 2
12580280: RNCC: D | RNVC: 9

4 Nov 2015

3040-01-650-4298
Bell Crank

016504298
2039M51P02: RNCC: 3 | RNVC: 2

2 Dec 2015

3040-01-650-6910
Manual Control Lever

016506910
T00376-5083: RNCC: 3 | RNVC: 2
T00376-5083: RNCC: 3 | RNVC: 9

15 Dec 2015

3040-01-651-0014
Flexible Drive Shaft

016510014
89162-401-2: RNCC: 3 | RNVC: 2

28 Dec 2015

3040-01-651-6020
Piston Ring

016516020
266-22200-161-6060: RNCC: 3 | RNVC: 2
2211141-600-222: RNCC: D | RNVC: 9

22 Jan 2016

3040-01-653-1066
Pneumatic Actuator Cylinder Housing

016531066
EP-0021731: RNCC: 3 | RNVC: 2
EP-002719: RNCC: D | RNVC: 9

11 Mar 2016

3040-01-653-8671
Shouldered Shaft Assembly

016538671
29542538: RNCC: 3 | RNVC: 2

8 Apr 2016

3040-01-657-6830
Bell Crank

016576830
8226406: RNCC: 3 | RNVC: 2

25 Aug 2016

3040-01-661-4459
Straight Shaft Assembly

016614459
256T5710-121: RNCC: 3 | RNVC: 1

3 Mar 2017

3040-01-662-3122
Shouldered Shaft

016623122
6640207-1: RNCC: 3 | RNVC: 2

3 Apr 2017

3040-01-663-5715
Straight Shaft

016635715
3234AS540-03: RNCC: 3 | RNVC: 2
3234AS540-03: RNCC: 5 | RNVC: 2

15 May 2017

3040-01-664-6067
Linear Actuating Cylinder Assembly

016646067
8M0155794: RNCC: 3 | RNVC: 2
8M0098629: RNCC: 5 | RNVC: 9

27 Jun 2017

3040-01-653-5600
Body Hub

016535600
3612642: RNCC: 1 | RNVC: 2
29510823: RNCC: 3 | RNVC: 2

29 Mar 2016

3040-01-654-4201
Straight Shaft Assembly

016544201
256T5710-501: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-654-5558
Straight Shaft Assembly

016545558
256T5710-107: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-655-3963
Shouldered Shaft

016553963
802011341386-1: RNCC: 3 | RNVC: 2

25 May 2016

3040-01-655-9393
Shouldered Shaft

016559393
4646.302.106: RNCC: 3 | RNVC: 2

13 Jun 2016

3040-01-656-3721
Rigid Connecting Link

016563721
14002359: RNCC: 3 | RNVC: 9
14002359: RNCC: C | RNVC: 1

28 Jun 2016

3040-01-656-3870
Rigid Connecting Link

016563870
49150: RNCC: 3 | RNVC: 2

29 Jun 2016

3040-01-656-9796
Linear Actuating Cylinder Piston Rod

016569796
EP-0021836: RNCC: 3 | RNVC: 2

26 Jul 2016

3040-01-668-2519
Breather

016682519
HC-120-T-24P-E: RNCC: 3 | RNVC: 2

15 Nov 2017

3040-01-669-5177
Counterbalance Weight

016695177
393514CL5: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-670-3686
Disc Brake Caliper Assembly

016703686
98006A0624M1: RNCC: 3 | RNVC: 2

20 Feb 2018

3040-01-671-1644
Hydraulic Control Assembly

016711644
80550: RNCC: 3 | RNVC: 2
80550: RNCC: 3 | RNVC: 9
6183342: RNCC: 7 | RNVC: 2

16 Mar 2018

3040-01-670-6983
Shouldered Shaft Assembly

016706983
50185-1: RNCC: 3 | RNVC: 2
P51110-1 ITEM 6: RNCC: C | RNVC: 1
P51110-1: RNCC: D | RNVC: 9

1 Mar 2018

3040-01-682-5229
Rigid Connecting Link

016825229
748598K01: RNCC: 3 | RNVC: 2

12 Aug 2019

3040-01-684-1757
Rigid Connecting Link

016841757
108756-3: RNCC: 3 | RNVC: 2

24 Oct 2019

3040-01-608-7626
Nonaircraft Mechanical Actuator

016087626
593-7067140-A7: RNCC: 3 | RNVC: 2
H577-3303-A7: RNCC: 5 | RNVC: 2

11 Jul 2012

3040-01-609-6574
Hydraulic Accumulator

016096574
2ASF12005: RNCC: 3 | RNVC: 2
2ASF12005: RNCC: 3 | RNVC: 9

31 Jul 2012

3040-01-610-1292
Straight Shaft Assembly

016101292
70700-20421-044: RNCC: 3 | RNVC: 2
70700-20421: RNCC: D | RNVC: 9

10 Aug 2012

3040-01-619-6378
Rigid Connecting Link

016196378
209-062-758-137: RNCC: 3 | RNVC: 2
450-060-031: RNCC: D | RNVC: 9

11 Jun 2013

3040-01-622-5211
Straight Shaft

016225211
13480702: RNCC: 3 | RNVC: 2

10 Oct 2013

3040-01-682-2257
Rotating Shaft Eye Bracket

016822257
8381613: RNCC: 3 | RNVC: 2
8381613: RNCC: 5 | RNVC: 2

29 Jul 2019

3040-01-671-8721
Linear Actuating Cylinder

016718721
334/D1131: RNCC: 3 | RNVC: 2

13 Apr 2018

Load More Results