What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 108 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 108 of 300

3040-01-483-9006
Friction Lining Set

014839006
735P3: RNCC: 3 | RNVC: 2
7353P: RNCC: 3 | RNVC: 9
735P3: RNCC: 5 | RNVC: 2
7353P: RNCC: 5 | RNVC: 9

11 Apr 2001

3040-01-486-4860
Straight Shaft

014864860
342-7067322-31: RNCC: 3 | RNVC: 2
H643-7003-31: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

29 Jun 2001

3040-01-489-6186
Rigid Connecting Link

014896186
122-5589567 PC 23: RNCC: 3 | RNVC: 2
122-5589566 PC 71: RNCC: 5 | RNVC: 2

18 Sep 2001

3040-01-493-9704
Shouldered Shaft

014939704
040-31-SP211: RNCC: 3 | RNVC: 2
040-31-SP211: RNCC: 5 | RNVC: 2
025SH2-211 ITEM 3: RNCC: 5 | RNVC: 9
025SH2-211: RNCC: D | RNVC: 9

28 Jan 2002

3040-01-497-2748
Counterbalance Weight

014972748
6935103: RNCC: 3 | RNVC: 2

15 May 2002

3040-01-501-2433
Gag Device Muzzl Dr

015012433
751-6402805-AY99: RNCC: 3 | RNVC: 2
211091320: RNCC: 5 | RNVC: 1
751-6402805-AY99: RNCC: 5 | RNVC: 2
751-6405237-REF 55: RNCC: 5 | RNVC: 2
6402805: RNCC: D | RNVC: 9

26 Sep 2002

3040-01-493-5922
Control Cam

014935922
751-7072335-1: RNCC: 3 | RNVC: 2
751-7072305-34: RNCC: 5 | RNVC: 2
751-7072306-34: RNCC: 5 | RNVC: 2
7072305-34: RNCC: 5 | RNVC: 2
7072306-34: RNCC: 5 | RNVC: 2
7072335-1: RNCC: 5 | RNVC: 2
7072305: RNCC: D | RNVC: 9
7072306: RNCC: D | RNVC: 9
7072335: RNCC: D | RNVC: 9
7072335: RNCC: D | RNVC: 9

10 Jan 2002

3040-01-483-6984
Shouldered Shaft

014836984
CC-3003-EPCA: RNCC: 3 | RNVC: 2
CC-3000 ITEM NO. 6: RNCC: 5 | RNVC: 9
CC-3000-EPCA: RNCC: 5 | RNVC: 9
LHD-03000-S1: RNCC: D | RNVC: 9

5 Apr 2001

3040-01-486-4846
Straight Shaft

014864846
342-7067322-76: RNCC: 3 | RNVC: 2
H643-7003-76: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

29 Jun 2001

3040-01-488-9292
Osc Cylinder

014889292
50001198: RNCC: 3 | RNVC: 2

6 Sep 2001

3040-01-475-3529
Rigid Connecting Link

014753529
11E422020: RNCC: 3 | RNVC: 2
RIA148785: RNCC: 5 | RNVC: 9

1 Jun 2000

3040-01-483-8147
Spline Adapter

014838147
2161602: RNCC: 3 | RNVC: 2
G2161602: RNCC: 5 | RNVC: 2
3131601: RNCC: D | RNVC: 9

9 Apr 2001

3040-01-486-4695
Straight Shaft

014864695
342-7067322-74: RNCC: 3 | RNVC: 2
H643-7003-74: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

29 Jun 2001

3040-01-492-2763
Linear Actuating Cylinder Assembly

014922763
86420478: RNCC: 3 | RNVC: 2
86420478: RNCC: 5 | RNVC: 1
86420478: RNCC: 5 | RNVC: 2

20 Nov 2001

3040-01-492-5513
Piston Rod Ring

014925513
566-6985426-75: RNCC: 3 | RNVC: 2
H621-0102-75: RNCC: 5 | RNVC: 2
08-30129-007: RNCC: 5 | RNVC: 9
08-30129-007: RNCC: C | RNVC: 1
H621-0102: RNCC: D | RNVC: 9
566-6985426: RNCC: D | RNVC: 9

3 Dec 2001

3040-01-494-8105
Shaft Collar

014948105
ZH2253: RNCC: 3 | RNVC: 2
ZH2253: RNCC: 3 | RNVC: 2
080DH2-211 ITEM 9: RNCC: 5 | RNVC: 9
025DH2-211: RNCC: D | RNVC: 9
ZH225: RNCC: D | RNVC: 9

25 Feb 2002

3040-01-437-0197
Linear Actuating Cylinder Assembly

014370197
CA951: RNCC: 3 | RNVC: 2
TG10EWXX3AACA951: RNCC: 5 | RNVC: 2
7A8-08507: RNCC: 5 | RNVC: 2

3 Oct 1996

3040-01-456-6389
Push-Pull Control Assembly

014566389
100-03333-0132: RNCC: 3 | RNVC: 2

19 Jun 1998

3040-01-454-5336
Shouldered Shaft

014545336
006-NGC-011-300: RNCC: 3 | RNVC: 2
99-NGC-0-03 ITEM 11-R: RNCC: 5 | RNVC: 9
006-NGC-0-11-30: RNCC: C | RNVC: 1

3 Apr 1998

3040-01-440-2117
Shaft Collar

014402117
40145: RNCC: 3 | RNVC: 2

7 Jan 1997

3040-01-436-4202
Toggle Link Set

014364202
S-4127 ITEM 29: RNCC: 3 | RNVC: 2
S-4127: RNCC: D | RNVC: 9

19 Sep 1996

3040-01-456-0544
Linear Actuating Cylinder

014560544
9383155-1: RNCC: 3 | RNVC: 9
9383166-1: RNCC: 5 | RNVC: 2

28 May 1998

3040-01-456-6296
Shouldered Shaft

014566296
1354928: RNCC: 3 | RNVC: 2
24KP171: RNCC: 5 | RNVC: 2
135-4928: RNCC: 5 | RNVC: 9
24KP171: RNCC: 5 | RNVC: 9

19 Jun 1998

3040-01-449-8455
Mechanically Actuated Spindle

014498455
8100-1253-0238 PT NO 37: RNCC: 3 | RNVC: 2
8100-1253-0238: RNCC: D | RNVC: 9

17 Oct 1997

3040-01-447-2720
Shouldered Shaft

014472720
006-NGD-002-300: RNCC: 3 | RNVC: 2
N-996-65GC-A-001 ITEM 6: RNCC: 5 | RNVC: 2
N999-65GC-A-001 PC. NO. 6: RNCC: 5 | RNVC: 2
D-006-NGD-0-02-300: RNCC: 5 | RNVC: 9
N999-65GC-A-001: RNCC: D | RNVC: 9
N-996-65GC-A-001: RNCC: D | RNVC: 9

31 Jul 1997

3040-01-452-6181
Remote Control Lever

014526181
801010: RNCC: 3 | RNVC: 2
801010: RNCC: 5 | RNVC: 9

2 Feb 1998

3040-01-456-7881
Linear Actuating Cylinder Piston

014567881
24202985: RNCC: 3 | RNVC: 2
5714939: RNCC: 5 | RNVC: 2
24202985: RNCC: 5 | RNVC: 9
3040PL0751899: RNCC: 6 | RNVC: 9

26 Jun 1998

3040-01-446-3793
Straight Shaft

014463793
0311-861591: RNCC: 3 | RNVC: 2
AIN/0311 860591: RNCC: 5 | RNVC: 2
AIN/0311 861591: RNCC: 5 | RNVC: 2

1 Jul 1997

3040-01-424-2171
Shouldered Shaft

014242171
13-1821-3: RNCC: 3 | RNVC: 2
6984ED84 PC NO 23: RNCC: C | RNVC: 1
6984ED84: RNCC: D | RNVC: 9

24 Jan 1996

3040-01-434-0927
Linear Actuating Cylinder Assembly

014340927
X-600: RNCC: 3 | RNVC: 2

19 Jul 1996

3040-01-411-9471
Piston Rod Ring

014119471
101-45300-973-0050: RNCC: 3 | RNVC: 2
101-45300-973-0050: RNCC: 5 | RNVC: 2
1131E19 FIND 30: RNCC: 5 | RNVC: 2
101-45300-973-0: RNCC: C | RNVC: 1
1131E19: RNCC: D | RNVC: 9

6 Apr 1995

3040-01-434-1814
Piston Rod Guide

014341814
186225-0001: RNCC: 3 | RNVC: 2
236248 ITEM 34: RNCC: 5 | RNVC: 2
236248: RNCC: D | RNVC: 9

23 Jul 1996

3040-01-420-1919
Shouldered Shaft Assembly

014201919
W3T106445: RNCC: 3 | RNVC: 2
37000-4: RNCC: 3 | RNVC: 9

11 Oct 1995

3040-01-424-1472
Linear Actuating Cylinder Assembly Parts Kit

014241472
904843: RNCC: 3 | RNVC: 2
D-1455 MK REF: RNCC: 5 | RNVC: 2

22 Jan 1996

3040-01-410-8102
Shaft Retaining Plate

014108102
12387928: RNCC: 3 | RNVC: 2

12 Mar 1995

3040-01-411-9467
Piston Ring

014119467
102-46301-973-0051: RNCC: 3 | RNVC: 2
102-46301-973-0051: RNCC: 5 | RNVC: 2
1131E19 FIND 29: RNCC: 5 | RNVC: 2
102-46301-973-0: RNCC: C | RNVC: 1
1131E19: RNCC: D | RNVC: 9

6 Apr 1995

3040-01-417-2330
Control Cam

014172330
07209001128: RNCC: 3 | RNVC: 2
SW142-16: RNCC: 5 | RNVC: 2
B07209.001.128: RNCC: 5 | RNVC: 9
B07209.001.128: RNCC: 5 | RNVC: 9
SW142-16: RNCC: 5 | RNVC: 9
MP8353 FIND NO: RNCC: C | RNVC: 1
SW144 FIND 25: RNCC: C | RNVC: 1
SW122 FIND 25: RNCC: C | RNVC: 1
SW142: RNCC: D | RNVC: 9

3 Aug 1995

3040-01-418-2108
Inertia Damper

014182108
21072-801-1: RNCC: 3 | RNVC: 2
21070 FIND NO. 8: RNCC: 5 | RNVC: 9
21070-8: RNCC: 5 | RNVC: 9
21070: RNCC: D | RNVC: 9

22 Aug 1995

3040-01-389-9411
Nonaircraft Mechanical Actuator

013899411
12101-502: RNCC: 3 | RNVC: 2
S09879-504: RNCC: 5 | RNVC: 9
9879-504: RNCC: 5 | RNVC: 9

7 May 1994

3040-01-400-3164
Straight Shaft

014003164
36-155-054: RNCC: 3 | RNVC: 2
1024-02-D P 4: RNCC: 5 | RNVC: 2
SD-1090: RNCC: D | RNVC: 9

14 Dec 1994

3040-01-386-1810
Breather

013861810
50215-1061: RNCC: 3 | RNVC: 9
01070-0281 ITEM 3-15: RNCC: 5 | RNVC: 2
01070-0281: RNCC: D | RNVC: 9

28 Jan 1994

3040-01-386-6660
Bevel Gearshaft

013866660
70351-08072-102: RNCC: 3 | RNVC: 2
70351-08072: RNCC: D | RNVC: 9

10 Feb 1994

3040-01-386-8336
Straight Shaft

013868336
DWG 181080 P/N 317735: RNCC: 3 | RNVC: 2
317735: RNCC: 5 | RNVC: 2
317735: RNCC: 5 | RNVC: 9

16 Feb 1994

3040-01-384-6228
Linear Actuating Cylinder Assembly

013846228
32500-000-17: RNCC: 3 | RNVC: 2

19 Dec 1993

3040-01-398-5574
Flexible Shaft Assembly Core

013985574
8407-201: RNCC: 3 | RNVC: 2
B409-8407-201: RNCC: 5 | RNVC: 9

5 Nov 1994

3040-01-384-8884
Rigid Connecting Link

013848884
189029-0030: RNCC: 3 | RNVC: 2
281449-0001-24: RNCC: 5 | RNVC: 2

23 Dec 1993

3040-01-382-2014
Brake Disc

013822014
125D823AX G2: RNCC: 3 | RNVC: 2
125D823AX G2: RNCC: 3 | RNVC: 9
X316263: RNCC: 5 | RNVC: 2
125D823AX PART 9: RNCC: 5 | RNVC: 2
125D823AX G2: RNCC: 5 | RNVC: 9
125D823AX PART 9: RNCC: 5 | RNVC: 9
X316263: RNCC: 5 | RNVC: 9
125D823AX G-2: RNCC: 5 | RNVC: 9
125D823AX G-2: RNCC: 5 | RNVC: 9
125D823AX PART 9: RNCC: 5 | RNVC: 9

29 Oct 1993

3040-01-368-7672
Linear Actuating Cylinder Assembly

013687672
2-195-2-00021: RNCC: 3 | RNVC: 2
2-195-2-00021: RNCC: 5 | RNVC: 2
2-195-2-00021: RNCC: 5 | RNVC: 2

8 Dec 1992

3040-01-370-2882
Linear Actuating Cylinder Piston

013702882
2-195-2-00017: RNCC: 3 | RNVC: 2
2-195-2-00017: RNCC: 5 | RNVC: 2
2-195-2-00017: RNCC: 5 | RNVC: 2

17 Jan 1993

3040-01-370-0231
Linear Actuating Cylinder Assembly

013700231
6-372-003475: RNCC: 3 | RNVC: 2
6-372-003475: RNCC: 5 | RNVC: 2
6-372-003475: RNCC: 5 | RNVC: 2

11 Jan 1993

3040-01-368-7609
Shouldered Shaft

013687609
50134-1: RNCC: 3 | RNVC: 2

8 Dec 1992

3040-01-368-7648
Linear Actuating Cylinder Piston

013687648
A8-B5471: RNCC: 3 | RNVC: 2
B5471: RNCC: 5 | RNVC: 9

8 Dec 1992

3040-01-373-7077
Straight Shaft

013737077
000150534-000: RNCC: 3 | RNVC: 2
000-150-534: RNCC: D | RNVC: 9

9 Apr 1993

3040-01-374-3977
Straight Shaft

013743977
124-4322615 PC12: RNCC: 3 | RNVC: 2
124-4322615: RNCC: D | RNVC: 9

22 Apr 1993

3040-01-376-7152
Linear Actuating Cylinder Assembly

013767152
A-82010: RNCC: 3 | RNVC: 9
1378AS297-1: RNCC: 5 | RNVC: 2
1378AS297-1: RNCC: 7 | RNVC: 2

7 Jun 1993

3040-01-365-2737
Rigid Connecting Link

013652737
MBEU146784: RNCC: 3 | RNVC: 2
MBEU146784: RNCC: 5 | RNVC: 2
MBEU146784: RNCC: 5 | RNVC: 9
10107284: RNCC: 6 | RNVC: 9

4 Oct 1992

3040-01-363-0907
Nonaircraft Mechanical Actuator

013630907
9170423-10: RNCC: 3 | RNVC: 2
9170423-10: RNCC: 3 | RNVC: 9
9170423: RNCC: D | RNVC: 9

21 Aug 1992

3040-01-374-6534
Linear Actuating Cylinder Assembly

013746534
1378AS292-1: RNCC: 3 | RNVC: 2

27 Apr 1993

3040-01-377-4211
Linear Actuating Cylinder

013774211
6113521: RNCC: 3 | RNVC: 2

15 Jul 1993

3040-01-351-9747
Disc Brake Caliper

013519747
SK5729: RNCC: 3 | RNVC: 2
5729: RNCC: 5 | RNVC: 9
10C-0001SP ITEM 48: RNCC: 5 | RNVC: 9
5749: RNCC: 5 | RNVC: 9
10C-0001SP: RNCC: D | RNVC: 9

17 Jan 1992

3040-01-345-8919
Friction Lining

013458919
000011937-000: RNCC: 3 | RNVC: 2
061-000-090 ITEM 26: RNCC: 5 | RNVC: 2
061-000-090: RNCC: D | RNVC: 9

24 Sep 1991

3040-01-356-5357
Flexible Drive Shaft

013565357
64361-04105-103: RNCC: 3 | RNVC: 2

6 Apr 1992

3040-01-338-2411
Linear Actuating Cylinder Assembly

013382411
2079365: RNCC: 3 | RNVC: 2
344390: RNCC: 5 | RNVC: 9
344390: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-359-6803
Brake Backing Plate

013596803
8-005-211-01: RNCC: 3 | RNVC: 2
8-005-211-01: RNCC: 5 | RNVC: 9
8-005-211-1: RNCC: 5 | RNVC: 9

10 Jun 1992

3040-01-344-5858
Remote Control Lever

013445858
12472: RNCC: 3 | RNVC: 2
2GL124: RNCC: 5 | RNVC: 2
2GL124: RNCC: 5 | RNVC: 9
12472-G: RNCC: 5 | RNVC: 9

31 Aug 1991

3040-01-357-8756
Shouldered Shaft

013578756
4524730-2: RNCC: 3 | RNVC: 2
4524730 ITEM 2: RNCC: 5 | RNVC: 9
BSPR03000L0660M: RNCC: 5 | RNVC: 9
8816-01-00: RNCC: 5 | RNVC: 9
3037210: RNCC: 5 | RNVC: 9
4524730: RNCC: D | RNVC: 9

3 May 1992

3040-01-344-1974
Rigid Connecting Link

013441974
4606-529: RNCC: 3 | RNVC: 2
QPM3510-529: RNCC: 5 | RNVC: 2
A-C17102-529: RNCC: 5 | RNVC: 9
17B9F1112-529: RNCC: 7 | RNVC: 2

24 Aug 1991

3040-01-345-2120
Shaft Retaining Plate

013452120
S5306KB: RNCC: 3 | RNVC: 2
SF11032 ITEM-3: RNCC: 5 | RNVC: 2
SF11032: RNCC: D | RNVC: 9

13 Sep 1991

3040-01-335-1828
Manual Control Lever

013351828
1076-05: RNCC: 3 | RNVC: 2

6 Mar 1991

3040-01-346-9819
Friction Lining

013469819
A000011937001: RNCC: 3 | RNVC: 2
061-000-090 ITEM 27: RNCC: 5 | RNVC: 9
061-000-090 ITEM 27: RNCC: 5 | RNVC: 9
061-000-090: RNCC: 5 | RNVC: 9
000011937-001: RNCC: 5 | RNVC: 9

12 Oct 1991

3040-01-340-6057
Remote Control Lever

013406057
8431880: RNCC: 3 | RNVC: 2
8431880: RNCC: 3 | RNVC: 9

17 Jun 1991

3040-01-354-8235
Dual Disk Brake

013548235
6-188-000174: RNCC: 3 | RNVC: 2
6-188-000174: RNCC: 5 | RNVC: 2
6-188-000174: RNCC: 5 | RNVC: 2
2HE971: RNCC: C | RNVC: 1

6 Mar 1992

3040-01-327-5446
Rotating Shaft Eye Bracket

013275446
12313337-3: RNCC: 3 | RNVC: 2
12313337-3: RNCC: 8 | RNVC: 1

17 Oct 1990

3040-01-322-3443
Mechanical Drive Housing

013223443
5544215: RNCC: 3 | RNVC: 2
5544215: RNCC: 5 | RNVC: 2

3 Jul 1990

3040-01-295-9824
Push-Pull Control Assembly

012959824
508-266-101: RNCC: 3 | RNVC: 2
508-266-101: RNCC: 3 | RNVC: 2
5191381-2: RNCC: 5 | RNVC: 2
5191381: RNCC: 7 | RNVC: 1

14 Mar 1989

3040-01-306-4130
Flexible Shaft Assembly

013064130
65300-12165: RNCC: 1 | RNVC: 2
S23119-604: RNCC: 3 | RNVC: 2
65300-12165-104: RNCC: 3 | RNVC: 2
23119-604: RNCC: 5 | RNVC: 9
23119-604: RNCC: 5 | RNVC: 9

24 Aug 1989

3040-01-306-6926
Shouldered Shaft

013066926
10029081: RNCC: 3 | RNVC: 2

29 Aug 1989

3040-01-310-7492
Push-Pull Control Assembly

013107492
2-73849-9: RNCC: 3 | RNVC: 2
2-73849-9: RNCC: 5 | RNVC: 2
7-44781-1: RNCC: 5 | RNVC: 2
2-73849-9: RNCC: 5 | RNVC: 9
2-73849-9: RNCC: 5 | RNVC: 9
7-44781-1: RNCC: 5 | RNVC: 9
2-73849: RNCC: D | RNVC: 9

13 Nov 1989

3040-01-293-6816
Rigid Connecting Link

012936816
S4127 PART57: RNCC: 3 | RNVC: 2

3 Feb 1989

3040-01-310-6561
Manual Control Lever

013106561
050560DL: RNCC: 3 | RNVC: 2
PLC-10642 ITEM 2: RNCC: 5 | RNVC: 2
C-4412PL791PC2O 54: RNCC: C | RNVC: 1

12 Nov 1989

3040-01-293-1248
Mechanical Drive Housing

012931248
C5A205490: RNCC: 3 | RNVC: 2
C5A205490: RNCC: 5 | RNVC: 9

26 Jan 1989

3040-01-294-0612
Rigid Connecting Link

012940612
70400-06698-048: RNCC: 3 | RNVC: 2
70400-06698-048: RNCC: 5 | RNVC: 2
70400-06698: RNCC: D | RNVC: 9

10 Feb 1989

3040-01-267-1390
Remote Control Lever

012671390
12351136: RNCC: 3 | RNVC: 2
12351136: RNCC: 3 | RNVC: 2
12351136: RNCC: 5 | RNVC: 2

5 Nov 1987

3040-01-285-1278
Manual Control Lever

012851278
116288-1: RNCC: 3 | RNVC: 2

7 Sep 1988

3040-01-264-8406
Linear Actuating Cylinder Assembly Parts Kit

012648406
C553117: RNCC: 3 | RNVC: 2
333833: RNCC: 5 | RNVC: 2
333833: RNCC: 5 | RNVC: 9

6 Oct 1987

3040-01-257-1625
Body Hub

012571625
1046058: RNCC: 3 | RNVC: 2
91317: RNCC: 5 | RNVC: 9

12 Jun 1987

3040-01-254-9831
Mechanical Drive Housing

012549831
034-49804: RNCC: 3 | RNVC: 2
034-40949: RNCC: 5 | RNVC: 9

14 May 1987

3040-01-267-0143
Friction Lining

012670143
9630235: RNCC: 3 | RNVC: 2
9630235: RNCC: 5 | RNVC: 2
9630235: RNCC: 5 | RNVC: 9
9630235: RNCC: 5 | RNVC: 9
9630235: RNCC: 5 | RNVC: 9

4 Nov 1987

3040-01-262-6192
Shouldered Shaft

012626192
M24060122: RNCC: 3 | RNVC: 2
A31170016 ITEM 11: RNCC: 5 | RNVC: 9
M24060122: RNCC: 5 | RNVC: 9

2 Sep 1987

3040-01-262-7595
Linear Actuating Cylinder Assembly Parts Kit

012627595
1501412: RNCC: 3 | RNVC: 2
1310390: RNCC: 5 | RNVC: 9
355696: RNCC: 5 | RNVC: 9

3 Sep 1987

3040-01-248-1571
Compressor Piston

012481571
MLH53826G1: RNCC: 3 | RNVC: 2
MLH53826G1: RNCC: 3 | RNVC: 9
MLH53826G1: RNCC: 5 | RNVC: 9
MLH53826G1: RNCC: 5 | RNVC: 9
34052522: RNCC: C | RNVC: 1

16 Jan 1987

3040-01-254-6077
Spur Gearshaft

012546077
85413202540: RNCC: 3 | RNVC: 2

8 May 1987

3040-01-248-0526
Disk Brake Shoe

012480526
DGR4350B PT70C: RNCC: 3 | RNVC: 2
DGR4350C PT70C: RNCC: 5 | RNVC: 1
D1704ADF ITEM 4: RNCC: 5 | RNVC: 1
DGR4350B PT70CVM: RNCC: 5 | RNVC: 2
1704-0004: RNCC: 5 | RNVC: 2
1704-0004VM: RNCC: 5 | RNVC: 2
D1704ADF ITEM 4VM: RNCC: 5 | RNVC: 2
DGR4350C PT70CVM: RNCC: 5 | RNVC: 2

15 Jan 1987

3040-01-244-4727
Shouldered Shaft

012444727
1499930: RNCC: 3 | RNVC: 2
1499930: RNCC: 5 | RNVC: 9
1499900: RNCC: C | RNVC: 1

14 Nov 1986

3040-01-246-5939
Linear Actuating Cylinder Assembly

012465939
52B10755-1: RNCC: 3 | RNVC: 2
3.25DD2HLT39AX22.00: RNCC: 5 | RNVC: 2
3.25DD2HLT39AX22.00: RNCC: 5 | RNVC: 2
52B10755-1: RNCC: 5 | RNVC: 2
3.25DD2HLT39AX22.00: RNCC: 5 | RNVC: 9
3040PL0828388: RNCC: 6 | RNVC: 9

16 Dec 1986

3040-01-241-4695
Shouldered Shaft

012414695
DS-842675: RNCC: 3 | RNVC: 2
842675: RNCC: D | RNVC: 9

26 Sep 1986

3040-01-258-6586
Spur Gearshaft

012586586
735661: RNCC: 3 | RNVC: 2
10106990: RNCC: 6 | RNVC: 9

6 Jul 1987

3040-01-237-6813
Control Cam

012376813
2640-809X5 PC 4: RNCC: 3 | RNVC: 2
845-4558777 ITEM 29: RNCC: 5 | RNVC: 2

5 Aug 1986

3040-01-223-5182
Remote Control Lever

012235182
12313389: RNCC: 3 | RNVC: 2
12313389: RNCC: 8 | RNVC: 1

30 Dec 1985

3040-01-239-4188
Push-Pull Control Assembly

012394188
B-2287-42: RNCC: 3 | RNVC: 2
B-2287-42: RNCC: 3 | RNVC: 9
B-2287-42VM: RNCC: C | RNVC: 1

28 Aug 1986

3040-01-219-9930
Remote Control Lever

012199930
16151EH: RNCC: 3 | RNVC: 2

6 Nov 1985

3040-01-226-0409
Push-Pull Control Assembly

012260409
B-2287-49: RNCC: 3 | RNVC: 1
B-2287-49: RNCC: 5 | RNVC: 2
B-2287-49VM: RNCC: 5 | RNVC: 2

11 Feb 1986

3040-01-215-5983
Flexible Shaft Assembly

012155983
11463732: RNCC: 3 | RNVC: 2
11463732: RNCC: 5 | RNVC: 1

27 Aug 1985

3040-01-233-2885
Rigid Connecting Link

012332885
11444554: RNCC: 3 | RNVC: 2
11444554: RNCC: 5 | RNVC: 1

29 May 1986

3040-01-215-1717
Manual Control Lever

012151717
02182900: RNCC: 3 | RNVC: 2

22 Aug 1985

3040-01-240-3566
Bevel-Spur Gearshaft

012403566
801335: RNCC: 3 | RNVC: 2
801335: RNCC: 5 | RNVC: 2
784968: RNCC: 5 | RNVC: 9

12 Sep 1986

3040-01-240-3567
Multiple Gears Gearshaft

012403567
801337: RNCC: 3 | RNVC: 2
801337: RNCC: 5 | RNVC: 2
801337: RNCC: 5 | RNVC: 2
801337: RNCC: 5 | RNVC: 9
801337: RNCC: 5 | RNVC: 9

12 Sep 1986

3040-01-192-4787
Special Cam

011924787
123LM10120-611: RNCC: 3 | RNVC: 2
123LM10120-611: RNCC: 5 | RNVC: 9
123LM10120-611: RNCC: C | RNVC: 1

21 Oct 1984

3040-01-208-8651
Remote Control Lever

012088651
L6314042-001: RNCC: 3 | RNVC: 2

21 May 1985

3040-01-209-0497
Straight Shaft

012090497
12259831: RNCC: 3 | RNVC: 2

22 May 1985

3040-01-210-5882
Linear Actuating Cylinder

012105882
77264292-1-16: RNCC: 3 | RNVC: 2
77264292-1-16: RNCC: 5 | RNVC: 9
152-TU006-325-3: RNCC: C | RNVC: 1

14 Jun 1985

3040-01-211-4977
Control Cam

012114977
6988-0000: RNCC: 3 | RNVC: 2
6988: RNCC: 5 | RNVC: 2

27 Jun 1985

3040-01-193-1758
Shaft Retaining Plate

011931758
6-547-000165: RNCC: 3 | RNVC: 2
6-547-000165: RNCC: 5 | RNVC: 2
6-547-000165: RNCC: 5 | RNVC: 2
2CD634: RNCC: 5 | RNVC: 2
2CD634: RNCC: 5 | RNVC: 9

31 Oct 1984

3040-01-210-4109
Pump Driving Shaft

012104109
617F186H01: RNCC: 3 | RNVC: 2

12 Jun 1985

3040-01-200-8708
Shouldered Shaft

012008708
803-4384431-79: RNCC: 3 | RNVC: 2
803-4384431-A-079: RNCC: 5 | RNVC: 2
803-4384431-A-7: RNCC: C | RNVC: 1
803-4384431: RNCC: D | RNVC: 9

10 Feb 1985

3040-01-201-2612
Linear Actuating Cylinder

012012612
2.50-CC2HLTS14AC X 3.00: RNCC: 3 | RNVC: 2
AG152755: RNCC: 5 | RNVC: 9
2 1-2CC2HLTS14CX3: RNCC: 5 | RNVC: 9
AG152756-C: RNCC: 5 | RNVC: 9
S/NAG152755: RNCC: 5 | RNVC: 9
2 1-2CC2HLTS14CX3: RNCC: 5 | RNVC: 9
2 1/2CC2HLTS14C: RNCC: C | RNVC: 1

14 Feb 1985

3040-01-170-0809
Rigid Connecting Link

011700809
70250-34042-042: RNCC: 3 | RNVC: 2
70250-34042-042: RNCC: 5 | RNVC: 2
70250-34042-042: RNCC: 5 | RNVC: 2

19 Jan 1984

3040-01-176-9384
Linear Actuating Cylinder Assembly

011769384
C28558-1-0985: RNCC: 3 | RNVC: 2
C28558A10985: RNCC: 3 | RNVC: 9
10500524-PW: RNCC: 5 | RNVC: 2
C28558-1-985: RNCC: 5 | RNVC: 9
C28558-A1-985: RNCC: 5 | RNVC: 9
10500524: RNCC: 5 | RNVC: 9

18 Apr 1984

3040-01-172-9362
Control Cam

011729362
2668957: RNCC: 3 | RNVC: 2
2668957: RNCC: 5 | RNVC: 2
10159086: RNCC: 6 | RNVC: 9

28 Feb 1984

3040-01-182-6897
Cylinder Assembly

011826897
3G5192: RNCC: 3 | RNVC: 2

27 Jun 1984

3040-01-168-9862
Body Hub

011689862
77288: RNCC: 3 | RNVC: 2
217689: RNCC: 5 | RNVC: 2
58962: RNCC: 5 | RNVC: 9
77288: RNCC: 5 | RNVC: 9
10512601: RNCC: 7 | RNVC: 2

30 Dec 1983

3040-01-181-1805
Drive Shaft

011811805
P12615036: RNCC: 3 | RNVC: 2
P12615036: RNCC: 3 | RNVC: 9
P12611503L: RNCC: 5 | RNVC: 9

7 Jun 1984

3040-01-181-9800
Shouldered Shaft

011819800
42000A: RNCC: 3 | RNVC: 2

19 Jun 1984

3040-01-171-2804
Bell Crank

011712804
9511M26P01: RNCC: 3 | RNVC: 2

4 Feb 1984

3040-01-161-0410
Shouldered Shaft

011610410
492536: RNCC: 3 | RNVC: 2

31 Aug 1983

3040-01-139-6846
Shouldered Shaft

011396846
2657040: RNCC: 3 | RNVC: 2
10159286: RNCC: 6 | RNVC: 9

5 Oct 1982

3040-01-159-4611
Rigid Connecting Link

011594611
70400-02258-048: RNCC: 3 | RNVC: 2
70400-02258-048: RNCC: 5 | RNVC: 2
3040PL1960072: RNCC: 6 | RNVC: 9
70400-02258-048: RNCC: 7 | RNVC: 2

9 Aug 1983

3040-01-162-5872
Shaft Retaining Plate

011625872
729205: RNCC: 3 | RNVC: 2

21 Sep 1983

3040-01-164-1852
Nonrotating Shaft Eye Bracket

011641852
1338370W: RNCC: 3 | RNVC: 2
1338370W: RNCC: 5 | RNVC: 9
1336370W: RNCC: 5 | RNVC: 9

13 Oct 1983

3040-01-140-6233
Linear Actuating Cylinder Piston Rod

011406233
H47016: RNCC: 3 | RNVC: 2
H47016: RNCC: 3 | RNVC: 9
H47016: RNCC: 5 | RNVC: 9
H47016: RNCC: 5 | RNVC: 9
33423294: RNCC: C | RNVC: 1

14 Oct 1982

3040-01-160-3170
Spur Gearshaft

011603170
731820: RNCC: 3 | RNVC: 2

19 Aug 1983

3040-01-163-7208
Straight Shaft

011637208
14022699: RNCC: 3 | RNVC: 2
5740148: RNCC: 5 | RNVC: 2
14022699: RNCC: 5 | RNVC: 9
3040PL0330714: RNCC: 6 | RNVC: 9

6 Oct 1983

3040-01-165-4816
Straight Shaft

011654816
91105-991: RNCC: 3 | RNVC: 2
2536064-801: RNCC: 3 | RNVC: 9
40428: RNCC: 5 | RNVC: 2
2 0000-325: RNCC: 5 | RNVC: 2
2 0000-325: RNCC: 5 | RNVC: 2
011457: RNCC: 5 | RNVC: 2
HE011457: RNCC: 5 | RNVC: 2
91105-991: RNCC: 5 | RNVC: 9
2 0000-325: RNCC: 5 | RNVC: 9
472-9956: RNCC: 6 | RNVC: 9

29 Oct 1983

3040-01-148-9527
Input Shaft

011489527
4775959-0034: RNCC: 3 | RNVC: 2
2642-982-03 PC34: RNCC: 5 | RNVC: 2
845-4687756 ITEM 110: RNCC: 5 | RNVC: 2
4775959-0034: RNCC: 5 | RNVC: 2
2642-982-01 ITEM 110: RNCC: 5 | RNVC: 9
845-4687756: RNCC: D | RNVC: 9
2642-982-01: RNCC: D | RNVC: 9

13 Mar 1983

3040-01-166-0582
Actuator Transmission Brake

011660582
KSMR3PT50-S50106: RNCC: 3 | RNVC: 2
10502577: RNCC: 5 | RNVC: 2
KSMR3PT50-S50106: RNCC: 5 | RNVC: 9
KSMR3PT501300NN: RNCC: 5 | RNVC: 9

6 Nov 1983

3040-01-147-9968
Remote Control Lever

011479968
12310975: RNCC: 3 | RNVC: 2
12285024: RNCC: E | RNVC: 8

26 Feb 1983

3040-01-148-8861
Push-Pull Control Assembly

011488861
8126745 98749: RNCC: 1 | RNVC: 2
048701-00-108FM: RNCC: 3 | RNVC: 2
048701-00-108FM: RNCC: 5 | RNVC: 2
048701-00-108FM: RNCC: 5 | RNVC: 9
8126745: RNCC: 5 | RNVC: 9
048701-00-108.C: RNCC: 5 | RNVC: 9
8126745: RNCC: 5 | RNVC: 9

11 Mar 1983

3040-01-166-2423
Shouldered Shaft

011662423
562243: RNCC: 3 | RNVC: 2
562243: RNCC: 5 | RNVC: 2

9 Nov 1983

3040-01-154-7829
Shouldered Shaft

011547829
10501012: RNCC: 3 | RNVC: 2

31 May 1983

3040-01-159-7135
Rigid Connecting Link

011597135
176C2591: RNCC: 3 | RNVC: 2
176C2591: RNCC: 5 | RNVC: 9

13 Aug 1983

3040-01-147-8568
Linear Actuating Cylinder Assembly

011478568
1H000027559: RNCC: 3 | RNVC: 2
1 1/2C2ATS14X9 5/8: RNCC: 5 | RNVC: 9
11/2C2ATS14X9.625: RNCC: 5 | RNVC: 9
FF035656A0: RNCC: 5 | RNVC: 9
3040PL1388789: RNCC: 6 | RNVC: 9
W121871: RNCC: C | RNVC: 1

23 Feb 1983

3040-01-109-4572
Straight Shaft

011094572
11629062: RNCC: 3 | RNVC: 2
11629062: RNCC: 5 | RNVC: 2

15 Mar 1981

3040-01-130-4541
Wheel Brake

011304541
9914.0413: RNCC: 3 | RNVC: 2
9914.0413: RNCC: 5 | RNVC: 2
2DY740: RNCC: 5 | RNVC: 2
BR-122-A: RNCC: 5 | RNVC: 2
9914.0413: RNCC: 5 | RNVC: 9
2DY740: RNCC: 5 | RNVC: 9
ISO-41-27: RNCC: 5 | RNVC: 9
9914-0413: RNCC: 5 | RNVC: 9

22 Apr 1982

3040-01-113-6244
Flexible Control Casing

011136244
3906503-9: RNCC: 3 | RNVC: 2
10106288: RNCC: 6 | RNVC: 9

30 May 1981

3040-01-118-1141
Worm Wheel Shaft

011181141
99139870: RNCC: 3 | RNVC: 2
39870: RNCC: 5 | RNVC: 9
3040PL0663009: RNCC: 6 | RNVC: 9

27 Aug 1981

3040-01-124-0867
Shouldered Shaft

011240867
4202023-1: RNCC: 3 | RNVC: 2
10106806: RNCC: 6 | RNVC: 9

27 Dec 1981

3040-01-089-3954
Counterbalance Weight

010893954
387384CL5: RNCC: 3 | RNVC: 2
387384CL5: RNCC: 5 | RNVC: 2

31 Jan 1980

3040-01-094-3015
Manual Control Lever

010943015
20380-001 FIND 32: RNCC: 3 | RNVC: 9
631C23-3: RNCC: 5 | RNVC: 2
631B23-3: RNCC: C | RNVC: 1
8-52N-680: RNCC: C | RNVC: 1
20380-001: RNCC: D | RNVC: 9

7 May 1980

3040-01-113-6467
Rigid Connecting Link

011136467
4-82017-1: RNCC: 3 | RNVC: 2
4-82017-1: RNCC: 3 | RNVC: 9
4-82017-1: RNCC: 5 | RNVC: 9
4-82017-1: RNCC: 5 | RNVC: 9
4-82017-1: RNCC: 5 | RNVC: 9
4-82017-1: RNCC: C | RNVC: 1
4-82017: RNCC: D | RNVC: 9

30 May 1981

3040-01-128-5717
Nonrotating Shaft Eye Bracket

011285717
12311028: RNCC: 3 | RNVC: 2

25 Mar 1982

3040-01-087-0436
Remote Control Lever

010870436
2585331: RNCC: 3 | RNVC: 2
2585331: RNCC: 5 | RNVC: 9

10 Dec 1979

3040-01-105-7166
Bell Crank

011057166
12269089: RNCC: 3 | RNVC: 2

3 Jan 1981

3040-01-109-6874
Hydraulic Accumulator Bladder

011096874
000SS-Z001-2: RNCC: 3 | RNVC: 2
000SS-Z005: RNCC: 5 | RNVC: 2
HS0-29-5N2: RNCC: 5 | RNVC: 9
HS0-29-6: RNCC: 5 | RNVC: 9
000SS-Z001: RNCC: D | RNVC: 9

19 Mar 1981

3040-01-107-1313
Nonrotating Shaft Eye Bracket

011071313
2584032: RNCC: 3 | RNVC: 2
2584032: RNCC: 5 | RNVC: 2
2584032: RNCC: 5 | RNVC: 2

30 Jan 1981

3040-01-120-9509
Manual Control Lever

011209509
2588254: RNCC: 1 | RNVC: 2
Q14094-1: RNCC: 3 | RNVC: 2
2600958: RNCC: 5 | RNVC: 2
Q14094: RNCC: 5 | RNVC: 9
2600958: RNCC: D | RNVC: 9

27 Oct 1981

3040-01-088-1916
Rigid Connecting Link

010881916
70400-01609-045: RNCC: 3 | RNVC: 2

8 Jan 1980

3040-01-137-8733
Shouldered Shaft

011378733
11319-D-18: RNCC: 3 | RNVC: 2
4X11S10X2: RNCC: 3 | RNVC: 2
4X11S10X2: RNCC: 3 | RNVC: 9
KMC-11319-D-18: RNCC: 5 | RNVC: 2
55-22208-15: RNCC: 5 | RNVC: 2
4X11-AP: RNCC: 5 | RNVC: 2
D-4X11S10X2: RNCC: 5 | RNVC: 9
11319-D-18: RNCC: 5 | RNVC: 9
4320PL1579827: RNCC: 6 | RNVC: 9

4 Sep 1982

3040-01-085-4284
Rigid Connecting Link

010854284
70400-02264-064: RNCC: 3 | RNVC: 2
70400-02264-064: RNCC: 5 | RNVC: 2
70400-02264-064: RNCC: 5 | RNVC: 2
70400-02264-056: RNCC: 5 | RNVC: 9
3040PL1954527: RNCC: 6 | RNVC: 9
70400-02264-064: RNCC: 7 | RNVC: 2

8 Nov 1979

3040-01-090-5935
Shaft Retaining Plate

010905935
70351-08024-101: RNCC: 3 | RNVC: 2

22 Feb 1980

3040-01-126-7461
Push-Pull Control Assembly

011267461
773-357-100-25: RNCC: 3 | RNVC: 2
4V9547: RNCC: 3 | RNVC: 2
773-357-100-25: RNCC: 5 | RNVC: 9

16 Feb 1982

3040-01-124-3880
Linear Actuating Cylinder

011243880
264269302-0001: RNCC: 3 | RNVC: 2
845-4687549 ITEM 1: RNCC: 3 | RNVC: 2
845-4687549: RNCC: D | RNVC: 9

1 Jan 1982

3040-01-084-2805
Linear Actuating Cylinder Head

010842805
4685194-0001: RNCC: 3 | RNVC: 2
87861-1507 ITEM 1: RNCC: 3 | RNVC: 2
21-85-6000: RNCC: 5 | RNVC: 2
704-4685194 ITEM 1: RNCC: 5 | RNVC: 2
87861-1507: RNCC: D | RNVC: 9
704-4685194: RNCC: D | RNVC: 9

14 Oct 1979

3040-01-059-3815
Counterbalance Weight

010593815
422633CLD: RNCC: 3 | RNVC: 2

10 Apr 1978

3040-01-083-5643
Remote Control Lever

010835643
12284026: RNCC: 3 | RNVC: 2
XM69475: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-01-040-6672
Rigid Connecting Link

010406672
2-13432-7: RNCC: 3 | RNVC: 2
2-13432-7: RNCC: 3 | RNVC: 9
2-13432-7: RNCC: 5 | RNVC: 9

12 May 1977

3040-01-057-3713
Shouldered Shaft

010573713
302003K1: RNCC: 3 | RNVC: 2
302003K1: RNCC: 5 | RNVC: 9
8038B: RNCC: 5 | RNVC: 9
8038B: RNCC: 5 | RNVC: 9
200136UPC44: RNCC: 5 | RNVC: 9

11 Mar 1978

3040-01-031-7500
Plain * Rail

010317500
2507583: RNCC: 3 | RNVC: 2

2 Dec 1976

3040-01-050-1633
Ball Joint Assembly

010501633
27491-2: RNCC: 3 | RNVC: 2
2479247: RNCC: 5 | RNVC: 9
27491-2: RNCC: 5 | RNVC: 9
27491: RNCC: D | RNVC: 9

1 Nov 1977

3040-01-067-2358
Linear Actuating Cylinder Piston

010672358
9987-955PC5-18: RNCC: 3 | RNVC: 2
360076: RNCC: 3 | RNVC: 2
360277: RNCC: 5 | RNVC: 9

27 Oct 1978

3040-01-062-3704
Linear Actuating Cylinder Piston

010623704
28-86-0003: RNCC: 3 | RNVC: 2
4685194-003B: RNCC: 3 | RNVC: 2
4685194-0003: RNCC: 3 | RNVC: 9
87861-1506ITEM4: RNCC: 5 | RNVC: 2
28-86-0003B: RNCC: 5 | RNVC: 9
4685194-0003A: RNCC: 5 | RNVC: 9
4685194-0003AB: RNCC: 5 | RNVC: 9

15 Jul 1978

3040-01-050-0064
Bevel Gearshaft

010500064
16K0746-7: RNCC: 3 | RNVC: 2

30 Oct 1977

3040-01-058-5204
Linear Actuating Cylinder

010585204
N-1462: RNCC: 3 | RNVC: 2
1809-1289ITEM17: RNCC: 5 | RNVC: 2

28 Mar 1978

3040-01-084-4211
Cylinder Adjusting Screw

010844211
87861-1514 ITEM 8: RNCC: 3 | RNVC: 2
704-4685201 ITEM 8: RNCC: 3 | RNVC: 2
704-4685201: RNCC: D | RNVC: 9

18 Oct 1979

3040-01-033-6786
Wiper Rod

010336786
2637513PC9: RNCC: 1 | RNVC: 2
4615SHD00750: RNCC: 3 | RNVC: 2

8 Jan 1977

3040-00-948-6571
Straight Shaft

009486571
369A8065: RNCC: 3 | RNVC: 2
369A8065: RNCC: 5 | RNVC: 9
369A8065: RNCC: 5 | RNVC: 9

6 Apr 1966

3040-00-991-3709
Counterbalance Weight

009913709
426836CL6: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-004-1357
Rigid Connecting Link

010041357
160C121005-1: RNCC: 3 | RNVC: 2
3004-1: RNCC: 5 | RNVC: 2
SR11485A1: RNCC: 5 | RNVC: 2
160C121005-3: RNCC: 5 | RNVC: 2
3504-1: RNCC: 5 | RNVC: 2
3504-1-G: RNCC: 5 | RNVC: 2
SR11006A: RNCC: 5 | RNVC: 2
160C121005-1: RNCC: 5 | RNVC: 9
160C121005-3: RNCC: 5 | RNVC: 9

22 May 1975

3040-00-968-8747
Cam Shaft

009688747
W2F24546: RNCC: 3 | RNVC: 2
W2F24546: RNCC: 5 | RNVC: 2
W2F24546: RNCC: 5 | RNVC: 9
W2F24546: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-008-1396
Rigid Connecting Link

010081396
8741933: RNCC: 3 | RNVC: 2
8741900: RNCC: D | RNVC: 9

16 Aug 1975

3040-00-944-8250
Fuel Control Output Shaft

009448250
9778BN: RNCC: 3 | RNVC: 2

16 Feb 1966

3040-01-003-6791
Linear Actuating Cylinder Assembly

010036791
740260: RNCC: 3 | RNVC: 9
4711525PC22: RNCC: 5 | RNVC: 1
740990: RNCC: 5 | RNVC: 2
50271160800: RNCC: 5 | RNVC: 9
D-8766-A: RNCC: 5 | RNVC: 9
740262: RNCC: 5 | RNVC: 9

3 May 1975

3040-00-968-8571
Bevel Gearshaft

009688571
W2F23702: RNCC: 3 | RNVC: 2
W2F23702: RNCC: 3 | RNVC: 9
W2F23702: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-991-4150
Control Cam

009914150
470388: RNCC: 3 | RNVC: 2
470388: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-01-011-4920
Bevel Gearshaft

010114920
742372: RNCC: 3 | RNVC: 2
742372: RNCC: 5 | RNVC: 2

23 Oct 1975

3040-00-891-1897
Shouldered Shaft

008911897
2481789: RNCC: 3 | RNVC: 2
2481789: RNCC: 5 | RNVC: 9

13 Jan 1967

3040-00-876-5023
Counterbalance Weight

008765023
422638CL4: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-877-3619
Spur Gearshaft

008773619
6787342: RNCC: 3 | RNVC: 2
6787342: RNCC: 3 | RNVC: 2
6787342: RNCC: 5 | RNVC: 2
6787342: RNCC: 5 | RNVC: 2
6787342: RNCC: 5 | RNVC: 9
6787342: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-888-4139
Counterbalance Weight

008884139
426836CL3: RNCC: 3 | RNVC: 2
426836CL3: RNCC: 5 | RNVC: 2
426836CL3: RNCC: 5 | RNVC: 2
426836CL3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-877-3551
Shouldered Shaft

008773551
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 5 | RNVC: 2
23007322: RNCC: 5 | RNVC: 2
23007322: RNCC: 5 | RNVC: 9
6825238: RNCC: 5 | RNVC: 9
6825238: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-873-4975
Shaft Collar

008734975
6084B: RNCC: 3 | RNVC: 9
873-4975: RNCC: 5 | RNVC: 2
200110AAG857: RNCC: 5 | RNVC: 9

3 Nov 1967

3040-00-913-1023
Brake Shoe

009131023
507208: RNCC: 3 | RNVC: 2
536276: RNCC: 3 | RNVC: 2
536276: RNCC: 5 | RNVC: 9
536276: RNCC: 5 | RNVC: 9
507208: RNCC: 5 | RNVC: 9

29 Jun 1966

3040-00-895-7083
Roller Shaft

008957083
810-2255759 PIECE 38 SHEET 16: RNCC: 3 | RNVC: 2
F61F1375: RNCC: 5 | RNVC: 2
F61F1375: RNCC: 5 | RNVC: 9
810-2255759-38: RNCC: C | RNVC: 1

27 Jan 1967

3040-00-922-5451
Rigid Connecting Link

009225451
10949637: RNCC: 3 | RNVC: 2
10949637: RNCC: 5 | RNVC: 2

19 Apr 1968

3040-00-854-0262
Shouldered Shaft

008540262
2481790: RNCC: 3 | RNVC: 2
APC2481790: RNCC: 5 | RNVC: 2
APC2481790: RNCC: 5 | RNVC: 9

11 Jan 1967

3040-00-888-4140
Counterbalance Weight

008884140
426836CL2: RNCC: 3 | RNVC: 2
426836CL2: RNCC: 5 | RNVC: 2
426836CL2: RNCC: 5 | RNVC: 2
426836CL2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-922-7999
Shaft Collar

009227999
11699387: RNCC: 3 | RNVC: 2

25 Dec 1965

3040-00-888-5185
Counterbalance Weight

008885185
436263CL7: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-759-0799
Linear Actuating Cylinder Assembly

007590799
PDD1015-3: RNCC: 3 | RNVC: 2
PDD1015-3: RNCC: 5 | RNVC: 2
PDD1015-3: RNCC: 5 | RNVC: 2
PDD1015-3: RNCC: 5 | RNVC: 2
PDD1015-3: RNCC: 5 | RNVC: 2
6997-010: RNCC: 5 | RNVC: 9
PDD0758-3: RNCC: 5 | RNVC: 9
PDG0372-3: RNCC: 5 | RNVC: 9
6997: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-837-1880
Counterbalance Weight

008371880
3010117CL4: RNCC: 3 | RNVC: 2
3010117CL4: RNCC: 5 | RNVC: 2

7 Dec 1966

3040-00-840-9581
Shaft Retaining Plate

008409581
10918113: RNCC: 3 | RNVC: 2
2540008409581: RNCC: 5 | RNVC: 9
2540008409581: RNCC: 6 | RNVC: 9

21 Dec 1966

3040-00-769-9367
Remote Control Lever

007699367
2300094-143000.08.0: RNCC: 3 | RNVC: 2
2300094-143000.08.0: RNCC: 5 | RNVC: 2
7699367: RNCC: 5 | RNVC: 2

12 May 1971

3040-00-830-5005
Counterbalance Weight

008305005
393513CL3: RNCC: 3 | RNVC: 2
393513CL3: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-830-5004
Counterbalance Weight

008305004
393513CL4: RNCC: 3 | RNVC: 2
393513CL4: RNCC: D | RNVC: 9

1 Jan 1962

3040-00-733-8912
Remote Control Lever

007338912
8351387: RNCC: 3 | RNVC: 2
3040007338912: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-827-3378
Pawl

008273378
6-50764-1: RNCC: 3 | RNVC: 2
6-50764-1: RNCC: 3 | RNVC: 9
6-50764-1: RNCC: 5 | RNVC: 9

23 Aug 1967

3040-00-670-9320
Linear Actuating Cylinder Assembly

006709320
56B23547-1: RNCC: 3 | RNVC: 2
56B23547-1: RNCC: 3 | RNVC: 9
56B23547-1: RNCC: 5 | RNVC: 2
56B23547-1: RNCC: 5 | RNVC: 9
3040PL0664060: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-605-8818
Linear Actuating Cylinder Assembly

006058818
55D21249: RNCC: 3 | RNVC: 2
55D21249: RNCC: 3 | RNVC: 9
55D21249: RNCC: 5 | RNVC: 2
55D21249: RNCC: 5 | RNVC: 2
5C1750A: RNCC: 5 | RNVC: 2
1C1750A: RNCC: 5 | RNVC: 2
LC1750A: RNCC: 5 | RNVC: 2
50-19108: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-631-2258
Crank Assembly

006312258
9-64334-8: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-593-5024
Flexible Casing Coupling Nut

005935024
09B17: RNCC: 3 | RNVC: 2
09B17: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-611-6187
Remote Control Lever

006116187
7962131: RNCC: 3 | RNVC: 2
3040006116187: RNCC: 5 | RNVC: 9

5 Feb 1975

3040-00-633-0214
Shouldered Shaft

006330214
373164: RNCC: 3 | RNVC: 2
373169: RNCC: 5 | RNVC: 2
6330214: RNCC: 5 | RNVC: 2
373164: RNCC: 5 | RNVC: 9
6330312: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-673-7883
Rigid Connecting Link

006737883
1655970: RNCC: 3 | RNVC: 2
BUWEPSDWG1655970: RNCC: 5 | RNVC: 2
BUWEPSDWG1655970: RNCC: 5 | RNVC: 9
BUWEPSDWG1655970: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-631-2257
Bell Crank

006312257
9-64334-7: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-678-3165
Shouldered Shaft

006783165
7953782: RNCC: 3 | RNVC: 2
3040006783165: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-560-2894
Rigid Connecting Link

005602894
283208: RNCC: 3 | RNVC: 2
283208: RNCC: 3 | RNVC: 9
283208: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-570-3392
Rigid Connecting Link

005703392
340239-7: RNCC: 3 | RNVC: 2
3040PL1608366: RNCC: 6 | RNVC: 9

1 Dec 1974

3040-00-589-9062
Bell Crank

005899062
354648-1: RNCC: 3 | RNVC: 2
354648-1: RNCC: 5 | RNVC: 2
354648-1: RNCC: 5 | RNVC: 2
354648-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-615-8802
Rigid Connecting Link

006158802
8741928: RNCC: 3 | RNVC: 2
3040006158802: RNCC: 5 | RNVC: 9
8741900: RNCC: D | RNVC: 9

15 Feb 1975

3040-00-460-2936
Rigid Connecting Link

004602936
416559-2: RNCC: 3 | RNVC: 2
416559-2: RNCC: 5 | RNVC: 2
416559-2: RNCC: 5 | RNVC: 2

5 Jan 1970

3040-00-544-2144
Manual Control Lever

005442144
344059-5: RNCC: 3 | RNVC: 2
344059-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-526-0350
Straight Shaft

005260350
94410-1: RNCC: 3 | RNVC: 2
94410-1: RNCC: 3 | RNVC: 9
94410-1: RNCC: 5 | RNVC: 2
94410-1: RNCC: 5 | RNVC: 9

28 Aug 1974

3040-00-435-5579
Shouldered Shaft

004355579
C5A27971: RNCC: 3 | RNVC: 9
C5A27971: RNCC: 5 | RNVC: 2

19 Mar 1969

3040-00-477-0436
Ball Joint

004770436
F22-27: RNCC: 3 | RNVC: 2
F22-27: RNCC: 5 | RNVC: 2
F22-27: RNCC: 5 | RNVC: 9
2587637-2: RNCC: D | RNVC: 9

11 Jun 1971

3040-00-435-0847
Bevel Gearshaft

004350847
C5A27163: RNCC: 3 | RNVC: 2
C5A27163: RNCC: 5 | RNVC: 9

14 Mar 1969

3040-00-394-5785
Rotating Shaft Eye Bracket

003945785
14-23529-1: RNCC: 3 | RNVC: 2
14-23529-1: RNCC: 3 | RNVC: 9
14-23529-1: RNCC: 5 | RNVC: 9

18 Apr 1974

3040-00-396-5098
Counterbalance Weight

003965098
211146CL7: RNCC: 3 | RNVC: 2
211146CL7: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-402-8328
Linear Actuating Cylinder Assembly Parts Kit

004028328
PK802HLL05: RNCC: 3 | RNVC: 2

1 Jun 1970

3040-00-372-4827
Brake Disc

003724827
566842400: RNCC: 3 | RNVC: 2
8-004-208-00: RNCC: 5 | RNVC: 9
8-004-208: RNCC: 5 | RNVC: 9
6097826-003: RNCC: C | RNVC: 1

12 Mar 1974

3040-00-435-0843
Multiple Gears Gearshaft

004350843
C5A27149: RNCC: 3 | RNVC: 2
C5A27149: RNCC: 3 | RNVC: 9

14 Mar 1969

3040-00-405-0671
Stud Shaft

004050671
420201-1: RNCC: 3 | RNVC: 2

29 Mar 1971

3040-00-403-7001
Shouldered Shaft

004037001
65652-11211-101: RNCC: 3 | RNVC: 2

30 Jul 1969

NSN 3040-00-396-5099 003965099 WEIGHT,COUNTERBALANCE

3040-00-396-5099
Counterbalance Weight

003965099
211146CL8: RNCC: 3 | RNVC: 2
211146CL8: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-316-4334
Linear Actuating Cylinder Cap

003164334
123AMM50007-1: RNCC: 3 | RNVC: 2
123AMM50007-1: RNCC: 5 | RNVC: 2
123AMM50007-1: RNCC: 5 | RNVC: 2
123AMM50007-1: RNCC: 5 | RNVC: 9

11 Nov 1973

3040-00-229-3417
Manual Control Lever

002293417
23053191: RNCC: 3 | RNVC: 2
6878491: RNCC: 5 | RNVC: 9
6878491: RNCC: 5 | RNVC: 9
6856989: RNCC: C | RNVC: 1

23 May 1973

3040-00-252-5452
Straight Shaft

002525452
135B5909-2: RNCC: 3 | RNVC: 2
3040PL0664003: RNCC: 6 | RNVC: 9
135B5909-2: RNCC: C | RNVC: 1

22 Jun 1973

3040-00-307-9792
Crew Door Shaft

003079792
339982: RNCC: 3 | RNVC: 9
307-9792: RNCC: 5 | RNVC: 2
339982: RNCC: 5 | RNVC: 2
339982: RNCC: 5 | RNVC: 9
3040PL0816039: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-342-8282
Bell Crank

003428282
60-3321-2: RNCC: 3 | RNVC: 2
60-3321-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-340-9427
Remote Control Lever

003409427
6-83888: RNCC: 3 | RNVC: 2
6-83888: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-213-9188
Rigid Connecting Link

002139188
6-40469-502: RNCC: 3 | RNVC: 2
6-40469-502: RNCC: 3 | RNVC: 9
6-40469-502: RNCC: 5 | RNVC: 2
6-40469-502: RNCC: 5 | RNVC: 9

27 Apr 1973

3040-00-220-2049
Pawl

002202049
8448235: RNCC: 3 | RNVC: 2

29 Jan 1969

3040-00-223-7793
Straight Shaft

002237793
A700069: RNCC: 3 | RNVC: 2
700069: RNCC: C | RNVC: 1

17 May 1973

3040-00-273-1205
Friction Lining

002731205
566586200: RNCC: 3 | RNVC: 2
5-18-6602: RNCC: 5 | RNVC: 9
5-18-6602-00: RNCC: 5 | RNVC: 9

30 Jul 1973

3040-00-340-9450
Remote Control Lever

003409450
60-2711: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-226-2558
Shouldered Shaft Assembly

002262558
10870627: RNCC: 3 | RNVC: 2

3 Jan 1968

3040-00-133-0983
Rotating Shaft Eye Bracket

001330983
10898073: RNCC: 3 | RNVC: 2
2510001330983: RNCC: 5 | RNVC: 9
2510001330983: RNCC: 6 | RNVC: 9

20 Dec 1968

3040-00-152-7105
Bevel Gearshaft

001527105
513512: RNCC: 3 | RNVC: 2

16 Oct 1971

3040-00-171-2308
Manual Control Lever

001712308
123LM10109-501: RNCC: 3 | RNVC: 2
123LM10109-501: RNCC: 5 | RNVC: 2
123LM10109-501: RNCC: 5 | RNVC: 9
123LM10109: RNCC: D | RNVC: 9

27 Aug 1972

3040-00-139-6507
Spur Gearshaft

001396507
9A186: RNCC: 3 | RNVC: 2

18 Aug 1971

3040-00-075-8491
Spur Gearshaft

000758491
490737: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-006-5233
Multiple Gears Gearshaft

000065233
42252E29: RNCC: 3 | RNVC: 2

16 Jul 1972

3040-00-075-5737
Rigid Connecting Link

000755737
2600RJS2: RNCC: 3 | RNVC: 9
108398-001: RNCC: 5 | RNVC: 2
600-RJS-02: RNCC: 5 | RNVC: 2
600RJS2: RNCC: 5 | RNVC: 9
30350-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-078-4445
Friction Lining

000784445
H080002-005: RNCC: 3 | RNVC: 2
H080002-003: RNCC: 3 | RNVC: 9
J80001PC3: RNCC: 5 | RNVC: 1
H080002-004: RNCC: 5 | RNVC: 9
H80002: RNCC: 5 | RNVC: 9
3040PL0822952: RNCC: 6 | RNVC: 9
H80002-2: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-015-8546
Nonrotating Shaft Eye Bracket

000158546
6829556: RNCC: 3 | RNVC: 2
6829556: RNCC: 5 | RNVC: 2
6829556MAS: RNCC: 5 | RNVC: 2
6829556: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-006-5232
Spur Gearshaft

000065232
42252E30: RNCC: 3 | RNVC: 2

16 Jul 1972

3040-00-072-8880
Shouldered Shaft

000728880
3-13420-1: RNCC: 3 | RNVC: 2
3-13420-1: RNCC: 3 | RNVC: 9
3-13420-1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-073-0187
Shouldered Shaft

000730187
8432936: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-006-6790
Spur Gearshaft

000066790
42252E31: RNCC: 3 | RNVC: 2

25 Jun 1972

3040-00-001-1682
Rigid Connecting Link

000011682
123L10013-501: RNCC: 3 | RNVC: 9
123L10013: RNCC: 5 | RNVC: 1
123L10013-501: RNCC: 5 | RNVC: 2
123L10013-501: RNCC: 5 | RNVC: 9
123L10013-501: RNCC: C | RNVC: 1
123L10013: RNCC: D | RNVC: 9

24 Sep 1972

3040-01-614-9798
Counterbalance Weight

016149798
7-5R2430112-015: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-614-9965
Housing Adapter

016149965
3855987: RNCC: 3 | RNVC: 2
3855987: RNCC: 5 | RNVC: 9

20 Dec 2012

3040-01-615-6475
Pivot Shaft Assembly

016156475
200126-01: RNCC: 3 | RNVC: 2

18 Jan 2013

3040-01-608-6285
Pneumatic Accumulator

016086285
AB-1500: RNCC: 3 | RNVC: 2

5 Jul 2012

3040-01-616-3709
Rigid Connecting Link

016163709
A3102V3454: RNCC: 3 | RNVC: 2
TDA A 3102X3454: RNCC: 5 | RNVC: 2

12 Feb 2013

3040-01-617-0388
Mechanical Drive Housing

016170388
02584686: RNCC: 3 | RNVC: 2

7 Mar 2013

3040-01-617-2490
Linear Actuating Cylinder Assembly

016172490
CRC-2522: RNCC: 3 | RNVC: 2
CRC-2522: RNCC: 5 | RNVC: 2
F149918 REV A: RNCC: D | RNVC: 9

18 Mar 2013

3040-01-610-0113
Housing Adapter

016100113
1978939: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-610-1098
Shaft Supp Liner

016101098
14005250: RNCC: 3 | RNVC: 2
172-20768-24: RNCC: 3 | RNVC: 9
172-20768-24: RNCC: 5 | RNVC: 9

9 Aug 2012

3040-01-612-2615
Extension Shaft

016122615
5188706: RNCC: 3 | RNVC: 2

5 Oct 2012

3040-01-611-8616
Shouldered Shaft Assembly

016118616
GS-5086-1: RNCC: 3 | RNVC: 2

26 Sep 2012

3040-01-612-3525
Linear Actuating Cylinder Assembly

016123525
MCTI-034-0777-10: RNCC: 3 | RNVC: 9

10 Oct 2012

3040-01-612-4211
Rigid Connecting Link

016124211
26142000055: RNCC: 3 | RNVC: 2
26142000055: RNCC: 3 | RNVC: 9

11 Oct 2012

3040-01-612-4463
Straight Shaft

016124463
332/D9439: RNCC: 3 | RNVC: 2

11 Oct 2012

3040-01-614-9701
Shouldered Shaft

016149701
41013384: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-614-0044
Shouldered Shaft

016140044
W6NSB30500: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-613-4743
Rigid Connecting Link

016134743
881210T02: RNCC: 3 | RNVC: 2

8 Nov 2012

3040-01-614-3617
Rigid Connecting Link

016143617
74A411717-1001: RNCC: 3 | RNVC: 2
74A411717-1001: RNCC: 5 | RNVC: 2

3 Dec 2012

3040-01-612-3789
Manual Control Lever

016123789
4026665: RNCC: 3 | RNVC: 2
4026665: RNCC: 5 | RNVC: 9

10 Oct 2012

3040-01-618-8468
Control Cable Assembly

016188468
J5090-0010: RNCC: 3 | RNVC: 2

8 May 2013

3040-01-620-0812
Shouldered Shaft

016200812
43042-00288-2: RNCC: 3 | RNVC: 2

1 Jul 2013

3040-01-621-3826
Linear Actuating Cylinder Assembly

016213826
WK-871-126 ASSY A: RNCC: 3 | RNVC: 2

5 Sep 2013

3040-01-621-7723
Linear Actuating Cylinder Piston

016217723
065091: RNCC: 3 | RNVC: 2

17 Sep 2013

3040-01-622-9633
Straight Shaft

016229633
4705608: RNCC: 3 | RNVC: 2
4705608: RNCC: 5 | RNVC: 2

28 Oct 2013

3040-01-622-8684
Mstr Hyd Brake Cyl

016228684
34762: RNCC: 3 | RNVC: 9
34762: RNCC: 5 | RNVC: 2

23 Oct 2013

3040-01-623-4173
Disk Brake Shoe

016234173
BRDMPAD-13: RNCC: 3 | RNVC: 2

13 Nov 2013

3040-01-624-9107
Rigid Connecting Link

016249107
123CM90602-5: RNCC: 3 | RNVC: 2
123CM90602-5: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-625-5794
Linear Actuating Cylinder Assembly

016255794
1PSR00000702: RNCC: 3 | RNVC: 2
4003583: RNCC: 5 | RNVC: 2
WD490120A0: RNCC: 5 | RNVC: 9
4003583: RNCC: 7 | RNVC: 9

7 Feb 2014

3040-01-626-0747
Housing Adapter

016260747
4014927: RNCC: 3 | RNVC: 2
4014927: RNCC: 5 | RNVC: 9

26 Feb 2014

3040-01-631-0534
Body Hub

016310534
17A4582P09: RNCC: 3 | RNVC: 2
17A4582P09: RNCC: 5 | RNVC: 9

27 Aug 2014

3040-01-630-4282
Shouldered Shaft

016304282
45M-759-1A: RNCC: 3 | RNVC: 2
EACD-824MF1-3W-HB-ITEM 24: RNCC: 5 | RNVC: 2

4 Aug 2014

3040-01-642-4348
Shouldered Shaft

016424348
845-7526489-2A-06-B-2N-6-008: RNCC: 3 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

25 Feb 2015

3040-01-642-7910
Linear Actuating Cylinder Assembly

016427910
BB298891A0: RNCC: 3 | RNVC: 2
BB298891: RNCC: 5 | RNVC: 9
BB298891AA: RNCC: D | RNVC: 9

10 Mar 2015

3040-01-644-1365
Shouldered Shaft

016441365
845-7526489-2B-07-A-3-N-E-008: RNCC: 3 | RNVC: 2

22 Apr 2015

3040-01-645-2392
Spline Adapter

016452392
3598-070: RNCC: 3 | RNVC: 2

9 Jun 2015

3040-01-645-8235
Mechanical Drive Housing

016458235
100554A1: RNCC: 3 | RNVC: 2

30 Jun 2015

3040-01-647-1787
Linear Actuating Cylinder Piston Rod

016471787
EP-0021211: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-647-2975
Linear Actuating Cylinder Assembly

016472975
B22528: RNCC: 3 | RNVC: 2

17 Aug 2015

3040-01-647-7101
Straight Shaft

016477101
3687312: RNCC: 3 | RNVC: 2

29 Aug 2015

3040-01-648-1660
Grease Cap

016481660
7018SUPCAP-60106: RNCC: 3 | RNVC: 2
CAP-60106: RNCC: 5 | RNVC: 2
PL-999F0934FIND47: RNCC: C | RNVC: 1

16 Sep 2015

3040-01-649-7374
Rigid Connecting Link

016497374
12580280-1: RNCC: 3 | RNVC: 2
12580280: RNCC: D | RNVC: 9

9 Nov 2015

3040-01-650-4441
Shouldered Shaft

016504441
13055584: RNCC: 3 | RNVC: 2

3 Dec 2015

3040-01-650-6538
Shouldered Shaft

016506538
4212759: RNCC: 1 | RNVC: 2
65330001: RNCC: 3 | RNVC: 2

14 Dec 2015

3040-01-650-3107
Linear Actuating Cylinder Assembly

016503107
333/E3430: RNCC: 3 | RNVC: 2
333/E3430: RNCC: 5 | RNVC: 2

27 Nov 2015

3040-01-651-6479
Control Cam

016516479
38004ZG: RNCC: 3 | RNVC: 2
206503 ITEM NO 1-11: RNCC: C | RNVC: 1

25 Jan 2016

3040-01-653-0838
Linear Actuating Cylinder Piston Rod

016530838
EP-0021732: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-1252
Linear Actuating Cylinder Piston Rod

016531252
EP-0021946: RNCC: 3 | RNVC: 2

11 Mar 2016

3040-01-653-3171
Pneumatic Actuator Cylinder Housing

016533171
EP-0021958: RNCC: 3 | RNVC: 2

18 Mar 2016

3040-01-654-1035
Shouldered Shaft

016541035
3587488: RNCC: 3 | RNVC: 2

18 Apr 2016

3040-01-653-7144
Piston Ring

016537144
509275-2073: RNCC: 3 | RNVC: 2
509275-2073: RNCC: 3 | RNVC: 2

4 Apr 2016

3040-01-653-7137
Planetary Gears Carrier

016537137
510257-021: RNCC: 3 | RNVC: 2
510257-021: RNCC: 3 | RNVC: 2

4 Apr 2016

3040-01-653-4453
Shaft Splined Kc 46

016534453
729861: RNCC: 3 | RNVC: 1

23 Mar 2016

3040-01-654-5540
Straight Shaft Assembly

016545540
256T5710-117: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-654-5550
Straight Shaft Assembly

016545550
256T5710-129: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-655-3102
Breather

016553102
AB-1000-3-M: RNCC: 3 | RNVC: 2
AB-1000-3 M3: RNCC: 3 | RNVC: 9

24 May 2016

3040-01-655-6604
Shaft Collar

016556604
125329AM-74: RNCC: 3 | RNVC: 1

4 Jun 2016

3040-01-654-7464
Shouldered Shaft

016547464
12592-26-A-801: RNCC: 3 | RNVC: 2
A-801-12592-26: RNCC: 5 | RNVC: 1
805-12348ITEM4: RNCC: C | RNVC: 1

9 May 2016

3040-01-656-0577
Remote Control Lever

016560577
1592150W: RNCC: 3 | RNVC: 2

15 Jun 2016

3040-01-656-4673
Differential Gear Unit

016564673
6690M/3-442-000: RNCC: 3 | RNVC: 2
6690-3-442-000: RNCC: 5 | RNVC: 9
6600 PL REV L FIND NO.11: RNCC: D | RNVC: 9

5 Jul 2016

3040-01-656-6293
Cylinder Support

016566293
ZF1296312042: RNCC: 3 | RNVC: 9
ZF1296312042: RNCC: 5 | RNVC: 2
1296.312.042: RNCC: 5 | RNVC: 9

12 Jul 2016

3040-01-656-9784
Linear Actuating Cylinder

016569784
EP-0021831: RNCC: 3 | RNVC: 2

26 Jul 2016

3040-01-659-3724
Nonaircraft Mechanical Actuator

016593724
6250-101: RNCC: 3 | RNVC: 2
6250-101: RNCC: 5 | RNVC: 2

22 Nov 2016

3040-01-660-2769
Push-Pull Control Assembly

016602769
68314: RNCC: 3 | RNVC: 2

13 Jan 2017

3040-01-661-3244
Straight Shaft

016613244
5122105-017-5: RNCC: 3 | RNVC: 2

27 Feb 2017

3040-01-662-1131
Nonaircraft Mechanical Actuator

016621131
S753300076-02: RNCC: 3 | RNVC: 2

27 Mar 2017

3040-01-663-1920
Belt-Chain Tension Adjusting Device

016631920
IDL-0010: RNCC: 3 | RNVC: 2
38131: RNCC: 5 | RNVC: 9
HBPAC-ASY-0003 ITEM 14: RNCC: D | RNVC: 9

1 May 2017

3040-01-666-9845
Straight Shaft

016669845
449-040-075-105: RNCC: 3 | RNVC: 2

28 Sep 2017

3040-01-667-6875
Spur Gearshaft

016676875
14001339: RNCC: 3 | RNVC: 2

26 Oct 2017

3040-01-683-1371
Double Rod Cylinder

016831371
SEF6466: RNCC: 3 | RNVC: 2
SEF6466: RNCC: 5 | RNVC: 2

10 Sep 2019

3040-01-687-1188
Linear Actuating Cylinder Piston

016871188
R5-508-16-HA046AA: RNCC: 3 | RNVC: 2
DWG-1Q8901-0010-01A REVD,IETM 6A: RNCC: D | RNVC: 9

19 Mar 2020

3040-01-687-2858
Linear Actuating Cylinder Assembly

016872858
RAC-306: RNCC: 3 | RNVC: 2
RAC-306: RNCC: 3 | RNVC: 9

26 Mar 2020

3040-01-687-8661
Manual Control Lever

016878661
JBIPR-209: RNCC: 3 | RNVC: 9
PR-209: RNCC: 5 | RNVC: 2

22 Apr 2020

3040-01-688-7458
Pawl

016887458
8198945: RNCC: 3 | RNVC: 2
8198945: RNCC: 5 | RNVC: 2

26 May 2020

3040-01-689-3144
Actuator Rod

016893144
4952361-68: RNCC: 3 | RNVC: 2
4952447/SHEET 2: RNCC: 5 | RNVC: 1

15 Jun 2020

3040-01-669-6269
Rigid Connecting Link

016696269
BB-8002407-01: RNCC: 3 | RNVC: 2

17 Jan 2018

3040-01-669-7131
Worm Shaft

016697131
BB-8002475-1: RNCC: 3 | RNVC: 2

18 Jan 2018

3040-01-670-6820
Control Cam

016706820
904215-01: RNCC: 3 | RNVC: 2

1 Mar 2018

3040-01-672-8152
Linear Actuating Cylinder Cap

016728152
ACC71720D45: RNCC: 3 | RNVC: 2
AEC71720 ITEM 29: RNCC: C | RNVC: 1
AEC71720: RNCC: D | RNVC: 9

17 May 2018

3040-01-678-4117
Shouldered Shaft Assembly

016784117
4381044: RNCC: 3 | RNVC: 2
N7295: RNCC: 5 | RNVC: 9

5 Feb 2019

3040-01-678-5980
Straight Shaft

016785980
11-PTR-9RBU: RNCC: 3 | RNVC: 9
11-PTR-9RBU: RNCC: C | RNVC: 1

14 Feb 2019

3040-01-609-9947
Rigid Connecting Link

016099947
803-6397268 REV-PC NO. 120: RNCC: 3 | RNVC: 2
6397268: RNCC: D | RNVC: 9

7 Aug 2012

3040-01-610-4624
Weldment

016104624
9302102: RNCC: 3 | RNVC: 2

17 Aug 2012

3040-01-610-7459
Nonaircraft Mechanical Actuator

016107459
646266: RNCC: 3 | RNVC: 2

28 Aug 2012

3040-01-617-5473
Mechanical Drive Housing

016175473
JGV3830: RNCC: 3 | RNVC: 2

26 Mar 2013

3040-01-617-6941
Hub Clamp

016176941
AX0772-32-SP: RNCC: 3 | RNVC: 2
LN0000316: RNCC: C | RNVC: 1

1 Apr 2013

3040-01-696-6710
Piston Ring

016966710
F11.43455-0024: RNCC: 3 | RNVC: 2

10 Aug 2021

3040-01-615-4078
Belt-Chain Tension Adjusting Device

016154078
70-89913: RNCC: 3 | RNVC: 2
136979: RNCC: 5 | RNVC: 2

10 Jan 2013

3040-01-615-7112
Housing Adapter

016157112
MTM-10116: RNCC: 3 | RNVC: 2

22 Jan 2013

3040-01-609-9797
Spider Assy

016099797
391407-3-JP5: RNCC: 3 | RNVC: 2
MIL-R-15917-IV-BR-MILGP IT NO 20: RNCC: 5 | RNVC: 2

7 Aug 2012

3040-01-617-4990
Breather

016174990
03246445: RNCC: 3 | RNVC: 2

25 Mar 2013

3040-01-618-3217
Shaft Collar

016183217
102425: RNCC: 3 | RNVC: 2

19 Apr 2013

3040-01-612-4042
Shouldered Shaft

016124042
4026652: RNCC: 3 | RNVC: 2
4026652: RNCC: 5 | RNVC: 9

10 Oct 2012

3040-01-612-5291
Manual Control Lever

016125291
TAHL2.250-12: RNCC: 3 | RNVC: 2

13 Oct 2012

3040-01-622-2635
Hydraulic Accumulator Cylinder

016222635
061871: RNCC: 3 | RNVC: 2

2 Oct 2013

3040-01-615-0279
Control Cam

016150279
M4304-06: RNCC: 3 | RNVC: 2
M4304 PC NO 6: RNCC: 5 | RNVC: 1

21 Dec 2012

3040-01-615-1277
Counterbalance Weight

016151277
7-5R2430112-017: RNCC: 3 | RNVC: 2

31 Dec 2012

3040-01-608-7556
Rotary Actuating Cylinder Assembly

016087556
347/20623: RNCC: 3 | RNVC: 2

10 Jul 2012

3040-01-609-1356
Flexible Drive Shaft

016091356
6070083: RNCC: 3 | RNVC: 2

17 Jul 2012

3040-01-617-1521
Manual Control Lever

016171521
WAF4: RNCC: 3 | RNVC: 2
WAF4: RNCC: 5 | RNVC: 2

13 Mar 2013

3040-01-610-5297
Aero-Caster

016105297
23541: RNCC: 3 | RNVC: 2

21 Aug 2012

3040-01-610-0110
Grease Cap

016100110
1859087: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-618-7515
Pad W Rtd

016187515
380402-002: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-610-0728
Grease Cap

016100728
1978828: RNCC: 3 | RNVC: 2

9 Aug 2012

3040-01-618-9263
Rigid Connecting Link

016189263
MC-012021-01: RNCC: 3 | RNVC: 2

10 May 2013

3040-01-611-4457
Ball Joint

016114457
458/20810: RNCC: 3 | RNVC: 2

14 Sep 2012

3040-01-620-2825
Krankkart 24V 18L

016202825
STMIL0022: RNCC: 3 | RNVC: 2

16 Jul 2013

3040-01-621-6066
Rigid Connecting Link

016216066
70400-01250-055: RNCC: 1 | RNVC: 2
2072-1: RNCC: 3 | RNVC: 2
3040PL1941494: RNCC: 6 | RNVC: 9

12 Sep 2013

3040-01-612-7501
Linear Actuating Cylinder Cap

016127501
8-B9092: RNCC: 3 | RNVC: 2

19 Oct 2012

3040-01-613-4472
Manual Control Lever

016134472
12545861: RNCC: 3 | RNVC: 2

7 Nov 2012

3040-01-613-9777
Brake Disc

016139777
TCR426325430: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-614-6612
Extension Shaft

016146612
4D09175-019: RNCC: 3 | RNVC: 2

12 Dec 2012

3040-01-614-7055
Remote Control Lever

016147055
6D69470H07: RNCC: 3 | RNVC: 2
6D69470-7: RNCC: 5 | RNVC: 9

12 Dec 2012

3040-01-624-1821
Rotating Shaft Eye Bracket

016241821
1028-A3: RNCC: 3 | RNVC: 2

18 Dec 2013

3040-01-625-7284
Straight Shaft

016257284
3977522: RNCC: 3 | RNVC: 2
3977522: RNCC: 5 | RNVC: 9

12 Feb 2014

3040-01-626-5447
Linear Actuating Cylinder Assembly

016265447
L15S0225AN118D: RNCC: 3 | RNVC: 9
20933DJ001 REV G FIND NO. 70: RNCC: 5 | RNVC: 2
J184675: RNCC: 5 | RNVC: 2
L15S0225AN11D8: RNCC: 5 | RNVC: 9
BM-2069: RNCC: 5 | RNVC: 9
1D-1336-PL: RNCC: D | RNVC: 9

13 Mar 2014

3040-01-626-7856
Multiple Gears Gearshaft

016267856
14002187: RNCC: 3 | RNVC: 2
14002187: RNCC: 3 | RNVC: 9

20 Mar 2014

3040-01-627-5581
Sliding Pad

016275581
PG-5029-00: RNCC: 3 | RNVC: 2

17 Apr 2014

3040-01-626-9400
Linear Actuating Cylinder Assembly

016269400
SUB-GAS SHOCK: RNCC: 3 | RNVC: 2

26 Mar 2014

3040-01-631-8149
Counterbalance Weight

016318149
8475531: RNCC: 3 | RNVC: 2
8595531: RNCC: 5 | RNVC: 9

26 Sep 2014

3040-01-633-6689
Shouldered Shaft

016336689
13055111: RNCC: 3 | RNVC: 2

28 Nov 2014

3040-01-642-2804
Mechanically Actuated Spindle

016422804
D-WK-879-92-9: RNCC: 3 | RNVC: 2
D-WK-879-92 REV H PC# 9: RNCC: C | RNVC: 1

19 Feb 2015

3040-01-643-0318
Control Cam

016430318
149B2016-2: RNCC: 3 | RNVC: 2

17 Mar 2015

3040-01-644-6086
Flexible Shaft Assembly

016446086
VCFX-1300-84: RNCC: 3 | RNVC: 2

13 May 2015

3040-01-644-3693
Clevis Hook

016443693
F167046: RNCC: 3 | RNVC: 2
F167039 REV A ITEM NO. 5: RNCC: C | RNVC: 1

1 May 2015

3040-01-646-0516
Shaft Collar

016460516
8A100: RNCC: 3 | RNVC: 2

10 Jul 2015

3040-01-647-0405
Rigid Connecting Link

016470405
W2T409804: RNCC: 3 | RNVC: 2

10 Aug 2015

3040-01-648-5131
Control Cam

016485131
153C6875P1: RNCC: 3 | RNVC: 2
153C6875: RNCC: D | RNVC: 9

28 Sep 2015

3040-01-649-1165
Rigid Connecting Link

016491165
311T4735-4: RNCC: 3 | RNVC: 1

19 Oct 2015

3040-01-650-3436
Rigid Connecting Link

016503436
12580280-3: RNCC: 3 | RNVC: 2
12580280: RNCC: D | RNVC: 9

30 Nov 2015

3040-01-651-0391
Nonaircraft Mechanical Actuator

016510391
EB6.1.SYD: RNCC: 3 | RNVC: 2
4164811: RNCC: 7 | RNVC: 2

30 Dec 2015

3040-01-653-3881
Linear Actuating Cylinder

016533881
EP-0021835: RNCC: 3 | RNVC: 2

22 Mar 2016

3040-01-654-4207
Straight Shaft Assembly

016544207
256T5710-505: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-654-4245
Straight Shaft Assembly

016544245
256T5710-133: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-655-1950
Spur Gearshaft

016551950
41657T: RNCC: 3 | RNVC: 2

20 May 2016

3040-01-657-2348
Rigid Connecting Link

016572348
4F61085-103A: RNCC: 3 | RNVC: 2

4 Aug 2016

3040-01-657-2424
Control Cable Assembly

016572424
CC34310: RNCC: 3 | RNVC: 2

4 Aug 2016

3040-01-659-5853
Linear Actuating Cylinder

016595853
PA12652913: RNCC: 3 | RNVC: 2
PA12652913: RNCC: 3 | RNVC: 9

5 Dec 2016

3040-01-660-2784
Transmission Fluid Cooler

016602784
FC18158: RNCC: 3 | RNVC: 2
FC18158: RNCC: 5 | RNVC: 2

13 Jan 2017

3040-01-662-1023
Spur Gearshaft

016621023
4977246-4: RNCC: 3 | RNVC: 2

27 Mar 2017

3040-01-663-1403
Straight Shaft Assembly

016631403
12581485: RNCC: 3 | RNVC: 2

27 Apr 2017

3040-01-665-6673
Worm Shaft

016656673
5400/8-999-000: RNCC: 3 | RNVC: 2
0511 PL REV T FIND NO. 32: RNCC: C | RNVC: 1

8 Aug 2017

3040-01-668-6709
Mechanical Drive Housing

016686709
7662491: RNCC: 3 | RNVC: 2
04080432: RNCC: 5 | RNVC: 2
7662491: RNCC: 5 | RNVC: 2
SW325-AC-IPB-010 FIG/INDEX 36-22: RNCC: C | RNVC: 1

1 Dec 2017

3040-01-669-3379
Shouldered Shaft

016693379
882T2700102-003: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-670-2263
Rigid Connecting Link

016702263
12581897: RNCC: 3 | RNVC: 2

12 Feb 2018

3040-01-669-7355
Shouldered Shaft

016697355
BB-8002563-1: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-674-2224
Nonaircraft Mechanical Actuator

016742224
40106: RNCC: 3 | RNVC: 2
40106: RNCC: 5 | RNVC: 9

17 Jul 2018

3040-01-674-2683
Spur Gearshaft

016742683
1712610: RNCC: 3 | RNVC: 2
1712610: RNCC: 5 | RNVC: 2

19 Jul 2018

3040-01-676-9786
Shaft Idler

016769786
GS-5251-4: RNCC: 3 | RNVC: 2
4367632: RNCC: 7 | RNVC: 2

20 Nov 2018

3040-01-682-4768
Rigid Connecting Link

016824768
74A671314-2001: RNCC: 3 | RNVC: 2
74A671314: RNCC: D | RNVC: 9

8 Aug 2019

3040-01-688-8108
Shouldered Shaft

016888108
810201-4: RNCC: 3 | RNVC: 2

27 May 2020

3040-01-689-0359
Power Transmission Components Boot

016890359
1125 BOOT: RNCC: 3 | RNVC: 2

3 Jun 2020

3040-01-689-0441
Flexible Shaft Assembly

016890441
22001-100X7FT6IN: RNCC: 3 | RNVC: 2
22001-100X90IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-693-7902
Spline Adapter

016937902
AKS4T-420-165: RNCC: 3 | RNVC: 2

5 Mar 2021

3040-01-694-7425
Linear Actuating Cylinder Piston

016947425
300-40507-2: RNCC: 3 | RNVC: 2

21 Apr 2021

3040-01-696-4820
Mechanically Actuated Spindle

016964820
2059-3429-000: RNCC: 3 | RNVC: 2

29 Jul 2021

3040-01-615-0881
Counterbalance Weight

016150881
7-5R2430112-003: RNCC: 3 | RNVC: 2

27 Dec 2012

3040-01-616-4179
Body Hub

016164179
12087-5038-02: RNCC: 3 | RNVC: 2

13 Feb 2013

3040-01-608-6048
Grease Cap

016086048
BB2328P: RNCC: 3 | RNVC: 2

3 Jul 2012

3040-01-618-5063
Spur Gearshaft

016185063
42093E289: RNCC: 3 | RNVC: 2
42093E289: RNCC: 3 | RNVC: 9

25 Apr 2013

3040-01-609-6575
Hydraulic Accumulator

016096575
2ASF12006: RNCC: 3 | RNVC: 2
2ASF12006: RNCC: 3 | RNVC: 9

31 Jul 2012

3040-01-632-1777
Pawl

016321777
0338335: RNCC: 3 | RNVC: 2

9 Oct 2014

3040-01-621-8750
Shouldered Shaft

016218750
12539191: RNCC: 3 | RNVC: 2
12539191: RNCC: 5 | RNVC: 2
12539191: RNCC: D | RNVC: 9

20 Sep 2013

3040-01-685-6627
Ball Joint

016856627
39-501: RNCC: 3 | RNVC: 2
39-501: RNCC: 5 | RNVC: 9

7 Jan 2020

3040-01-689-5208
Pivot Shaft Assembly

016895208
CMS151053: RNCC: 3 | RNVC: 2

25 Jun 2020

3040-01-692-0839
Rigid Connecting Link

016920839
3847AS137-3: RNCC: 3 | RNVC: 2

18 Nov 2020

3040-01-693-8286
Shaft Retaining Plate

016938286
SP-24: RNCC: 3 | RNVC: 2

8 Mar 2021

3040-01-614-9710
Helical Gearshaft

016149710
41012325-103: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-614-9861
Rigid Connecting Link

016149861
29-8078-1: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-617-6315
Remote Control Lever

016176315
2ABR12006: RNCC: 3 | RNVC: 2
2ABR12006: RNCC: 3 | RNVC: 9

28 Mar 2013

3040-01-609-1645
Shaft Idler

016091645
02/912527: RNCC: 3 | RNVC: 2

18 Jul 2012

3040-01-610-0108
Flexible Drive Shaft

016100108
1859086: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-611-8636
Shouldered Shaft Assembly

016118636
GS-5086-2: RNCC: 3 | RNVC: 2

26 Sep 2012

3040-01-612-9325
Body Hub

016129325
0011-2001: RNCC: 3 | RNVC: 2

24 Oct 2012

3040-01-613-6828
Planetary Gears Carrier

016136828
3412: RNCC: 3 | RNVC: 2

14 Nov 2012

3040-01-613-8033
Extension Shaft

016138033
4D09175-002: RNCC: 3 | RNVC: 2
388B109: RNCC: 5 | RNVC: 1

19 Nov 2012

3040-01-623-2488
Shaft Collar

016232488
88090485: RNCC: 3 | RNVC: 2
CCI-75-1-AL: RNCC: 3 | RNVC: 2
7A012: RNCC: 3 | RNVC: 2
6157K16: RNCC: 5 | RNVC: 2
17-3-2862-2: RNCC: 7 | RNVC: 2

6 Nov 2013

3040-01-624-7578
Shaft Collar

016247578
PL2005: RNCC: 3 | RNVC: 2

14 Jan 2014

3040-01-624-1739
Ball Joint

016241739
7000AG2252-1: RNCC: 3 | RNVC: 2

18 Dec 2013

3040-01-625-4142
Straight Shaft

016254142
3983996: RNCC: 3 | RNVC: 2
3983996: RNCC: 5 | RNVC: 9

4 Feb 2014

3040-01-625-3958
Shouldered Shaft

016253958
4019788: RNCC: 3 | RNVC: 2
4019788: RNCC: 5 | RNVC: 9

3 Feb 2014

3040-01-627-8068
Shouldered Shaft

016278068
3799632: RNCC: 3 | RNVC: 2
3799632: RNCC: 5 | RNVC: 2
3799632: RNCC: 5 | RNVC: 9
3799632: RNCC: 5 | RNVC: 9

29 Apr 2014

3040-01-627-9855
Manual Control Lever

016279855
PG-5056-00: RNCC: 3 | RNVC: 2

5 May 2014

3040-01-628-7588
Control Cam

016287588
C8757-2C: RNCC: 3 | RNVC: 2
92-24-212-12: RNCC: 5 | RNVC: 9

9 Jun 2014

3040-01-631-4485
Rigid Connecting Link

016314485
6-51857-13: RNCC: 3 | RNVC: 2

15 Sep 2014

3040-01-631-8471
Shouldered Shaft

016318471
5570701: RNCC: 3 | RNVC: 2

29 Sep 2014

3040-01-643-1059
Nonvehicular Propeller Shaft

016431059
828951: RNCC: 3 | RNVC: 2

20 Mar 2015

3040-01-644-1733
Linear Actuating Cylinder Assembly

016441733
RACH-206: RNCC: 3 | RNVC: 2

23 Apr 2015

3040-01-644-1215
Rigid Connecting Link

016441215
74A172207-2003: RNCC: 3 | RNVC: 2

22 Apr 2015

3040-01-644-9068
Brake Lining Kit

016449068
5100499-701: RNCC: 3 | RNVC: 2
5100499-701: RNCC: 3 | RNVC: 9
5100499-701: RNCC: 5 | RNVC: 9
5100499: RNCC: D | RNVC: 9

26 May 2015

3040-01-645-2224
Shouldered Shaft

016452224
3392AS1711: RNCC: 3 | RNVC: 2
3392AS1711: RNCC: 5 | RNVC: 2

8 Jun 2015

3040-01-645-5813
Mechanical Drive Housing Part

016455813
7-4651-5: RNCC: 3 | RNVC: 2

23 Jun 2015

3040-01-646-1055
Rigid Connecting Link

016461055
D-WK-879-30-25: RNCC: 3 | RNVC: 2
D-WK-879-30 REV K PC# 25: RNCC: C | RNVC: 1

13 Jul 2015

3040-01-649-3564
Shouldered Shaft

016493564
C501054-1: RNCC: 3 | RNVC: 2

27 Oct 2015

3040-01-650-9703
Mechanically Actuated Spindle

016509703
3992AS310-1: RNCC: 3 | RNVC: 2
3992AS310: RNCC: D | RNVC: 9

23 Dec 2015

3040-01-651-3209
Straight Shaft

016513209
110628-00: RNCC: 3 | RNVC: 2

13 Jan 2016

3040-01-651-3786
Counterbalance Weight

016513786
565906CL3: RNCC: 3 | RNVC: 2

15 Jan 2016

3040-01-652-0239
Straight Shaft

016520239
12304762: RNCC: 3 | RNVC: 2

8 Feb 2016

3040-01-653-2852
Shouldered Shaft

016532852
3637AS693-6: RNCC: 3 | RNVC: 2

17 Mar 2016

3040-01-653-3165
Pneumatic Actuator Cylinder Housing

016533165
EP-0021828: RNCC: 3 | RNVC: 2

18 Mar 2016

3040-01-654-2103
Rigid Connecting Link

016542103
273T4538-9: RNCC: 3 | RNVC: 1

20 Apr 2016

3040-01-654-4661
Straight Shaft Assembly

016544661
256T5710-125: RNCC: 3 | RNVC: 1

28 Apr 2016

3040-01-654-5384
Straight Shaft Assembly

016545384
256T5710-213: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-655-1890
Shouldered Shaft

016551890
T409161: RNCC: 3 | RNVC: 2

20 May 2016

3040-01-656-3841
Mechanically Actuated Spindle

016563841
14002356: RNCC: 3 | RNVC: 2
14002356: RNCC: 3 | RNVC: 9

29 Jun 2016

3040-01-656-5326
Straight Shaft

016565326
4646.254.020: RNCC: 3 | RNVC: 2
4646.254.006: RNCC: 5 | RNVC: 9

7 Jul 2016

3040-01-657-0546
Mixing Auger

016570546
2546-238-00: RNCC: 3 | RNVC: 2
1604-293-00: RNCC: 5 | RNVC: 9

28 Jul 2016

3040-01-658-0251
Straight Shaft

016580251
M27780012: RNCC: 3 | RNVC: 2
A31170063 REV 2 ITEM 36: RNCC: 5 | RNVC: 2

9 Sep 2016

3040-01-658-4528
Linear Actuating Cylinder Assembly

016584528
A-11-1-88-T-J-2: RNCC: 3 | RNVC: 2
1858570: RNCC: 3 | RNVC: 2

27 Sep 2016

3040-01-658-9102
Rigid Connecting Link

016589102
70400-06701-102: RNCC: 3 | RNVC: 2

25 Oct 2016

3040-01-661-4458
Straight Shaft Assembly

016614458
256T5710-123: RNCC: 3 | RNVC: 1

3 Mar 2017

3040-01-661-9184
Control Cam

016619184
617227017: RNCC: 3 | RNVC: 2
617257007 REV - FIND NO 4: RNCC: 5 | RNVC: 2
617257007: RNCC: 5 | RNVC: 9

20 Mar 2017

3040-01-667-7195
Bell Crank Support

016677195
1591M74P01: RNCC: 3 | RNVC: 2

26 Oct 2017

3040-01-692-9740
Nonaircraft Mechanical Actuator

016929740
JE1310-AFBUP-SR: RNCC: 3 | RNVC: 2
AFBUP-S: RNCC: 5 | RNVC: 1
JE-1310/NOTE 20/ASSEMBLY: RNCC: C | RNVC: 1
JE-1310: RNCC: D | RNVC: 9

21 Jan 2021

3040-01-669-2655
Manual Control Lever Assembly

016692655
803-7106793-4-2-41: RNCC: 3 | RNVC: 2
803-7106793-3-1-041: RNCC: 5 | RNVC: 9

3 Jan 2018

3040-01-672-5339
Brake Disc

016725339
4620147: RNCC: 3 | RNVC: 2

7 May 2018

3040-01-673-4375
Control Cable Assembly

016734375
NAS305-22-0274: RNCC: 3 | RNVC: 2

13 Jun 2018

3040-01-675-7162
Nonaircraft Mechanical Actuator

016757162
513-7585: RNCC: 3 | RNVC: 2

21 Sep 2018

3040-01-677-6907
Shaft Collar

016776907
269A5178-013: RNCC: 3 | RNVC: 9
269A5178-013: RNCC: 5 | RNVC: 9
269D5718-013: RNCC: 5 | RNVC: 9
269A5178-013: RNCC: C | RNVC: 1

31 Dec 2018

3040-01-615-7417
Shouldered Shaft

016157417
2ACA12010: RNCC: 3 | RNVC: 2
2ACA12010: RNCC: 3 | RNVC: 9

22 Jan 2013

3040-01-617-6309
Remote Control Lever

016176309
2ABR12012: RNCC: 3 | RNVC: 2
2ABR12012: RNCC: 3 | RNVC: 9

28 Mar 2013

3040-01-617-8041
Linear Actuating Cylinder Piston

016178041
050KE0026: RNCC: 3 | RNVC: 9

4 Apr 2013

3040-01-619-4671
Spline Adapter

016194671
269A6030-005: RNCC: 3 | RNVC: 2
269A6030-5: RNCC: 3 | RNVC: 2
269A6030-5: RNCC: 5 | RNVC: 2
269A6030-5: RNCC: 5 | RNVC: 9
269A6030-005: RNCC: 5 | RNVC: 9
269A6030-005: RNCC: 5 | RNVC: 9
269A6030-5: RNCC: 5 | RNVC: 9
269A6030-5: RNCC: C | RNVC: 1

3 Jun 2013

3040-01-610-4697
Body Hub

016104697
1051927: RNCC: 3 | RNVC: 2

17 Aug 2012

3040-01-610-0111
Rigid Connecting Link

016100111
1859386: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-611-2979
Bevel Gearshaft

016112979
HH5021 REV.F ITEM 3: RNCC: 3 | RNVC: 2
MD00001: RNCC: 3 | RNVC: 2

11 Sep 2012

3040-01-612-3136
Control Cam

016123136
4026653: RNCC: 3 | RNVC: 2
4026653: RNCC: 5 | RNVC: 9

9 Oct 2012

3040-01-612-4212
Shaft Collar

016124212
JD12/19-85B: RNCC: 3 | RNVC: 2
JD12/19-85B: RNCC: 3 | RNVC: 2

11 Oct 2012

3040-01-613-1297
Control Cam

016131297
039-055-00: RNCC: 3 | RNVC: 9

31 Oct 2012

3040-01-622-5110
Housing Adapter

016225110
12520031: RNCC: 3 | RNVC: 2

9 Oct 2013

3040-01-623-2781
Straight Shaft

016232781
31-4543-1: RNCC: 3 | RNVC: 2

6 Nov 2013

3040-01-624-9180
Linear Actuating Cylinder Assembly Parts Kit

016249180
J212550: RNCC: 3 | RNVC: 2
1D-1336-PL ITEM 1: RNCC: 5 | RNVC: 9
RPK-B/M-2069: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-627-0484
Shouldered Shaft Assembly

016270484
29546744: RNCC: 3 | RNVC: 2

31 Mar 2014

3040-01-628-6613
Shouldered Shaft

016286613
3796087: RNCC: 3 | RNVC: 2

5 Jun 2014

3040-01-628-8039
Control Cam

016288039
3037-1314: RNCC: 3 | RNVC: 2

10 Jun 2014

3040-01-630-0138
Shaft Collar

016300138
C200000031: RNCC: 3 | RNVC: 2
PI-NB2502-8PT6: RNCC: 5 | RNVC: 2

23 Jul 2014

3040-01-631-0550
Spline Adapter

016310550
803-5959305-X1XX-15: RNCC: 3 | RNVC: 1

27 Aug 2014

3040-01-644-1105
Rigid Connecting Link

016441105
74A670526-2005: RNCC: 3 | RNVC: 2

22 Apr 2015

3040-01-646-3909
Body Hub

016463909
144466A1: RNCC: 3 | RNVC: 2

21 Jul 2015

3040-01-647-1419
Mechanical Drive Housing

016471419
3585385: RNCC: 3 | RNVC: 2

12 Aug 2015

3040-01-647-2454
Linear Actuating Cylinder Piston Rod

016472454
EP-0021223: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-647-8124
Rigid Connecting Link

016478124
74A661145-1001: RNCC: 3 | RNVC: 2

2 Sep 2015

3040-01-647-8157
Control Cam

016478157
74A350842-2002: RNCC: 3 | RNVC: 2

2 Sep 2015

Load More Results