What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 107 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 107 of 300

3040-01-220-5429
Shouldered Shaft

012205429
J180818: RNCC: 3 | RNVC: 2
C20035D135: RNCC: 5 | RNVC: 9
C20035D135A: RNCC: C | RNVC: 1

16 Nov 1985

3040-00-146-9143
Spur Gearshaft

001469143
6005: RNCC: 3 | RNVC: 2
D15-600UPC528: RNCC: 3 | RNVC: 2
D15-648AAPC608: RNCC: 3 | RNVC: 2
D15-648BPC608: RNCC: 3 | RNVC: 2
D15-548PPC528: RNCC: 3 | RNVC: 2
D15-548SPC528: RNCC: 3 | RNVC: 2
D15-548TPC528: RNCC: 3 | RNVC: 2
D15-600BPC528: RNCC: 3 | RNVC: 2
D15-600WPC528: RNCC: 3 | RNVC: 2
D15-648XPC608: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-145-2769
Pawl

001452769
1278B: RNCC: 3 | RNVC: 2
1278B: RNCC: 3 | RNVC: 9
1278B: RNCC: 5 | RNVC: 9
111211PC126: RNCC: 5 | RNVC: 9
111023PC123: RNCC: 5 | RNVC: 9
111111PC126: RNCC: 5 | RNVC: 9
101028PC126: RNCC: 5 | RNVC: 9
101011PC126: RNCC: 5 | RNVC: 9
107224PC123: RNCC: 5 | RNVC: 9
107511PC126: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-129-6353
Bell Crank Support

001296353
318208: RNCC: 3 | RNVC: 2
70357HPC70966C: RNCC: 5 | RNVC: 2
NP71922ESPC28: RNCC: 5 | RNVC: 2
331320SH1ITEM15: RNCC: 5 | RNVC: 2
70327PC70966C: RNCC: 5 | RNVC: 2
70329PC70966C: RNCC: 5 | RNVC: 2
70966C: RNCC: 5 | RNVC: 2
NP71920ESPC28: RNCC: 5 | RNVC: 2
NP71921ESPC28: RNCC: 5 | RNVC: 2
70329PC70966C: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-407-6063
Linear Actuating Cylinder Assembly

014076063
SR-503-DV: RNCC: 3 | RNVC: 2
SR-503-D-V: RNCC: 3 | RNVC: 9
35916: RNCC: 5 | RNVC: 9

31 Jan 1995

3040-00-097-0983
Shaft Collar

000970983
Y10: RNCC: 3 | RNVC: 2
55-22381-72: RNCC: 5 | RNVC: 2
R136PC26: RNCC: 5 | RNVC: 9
R390PC26: RNCC: 5 | RNVC: 9
R140PC26: RNCC: 5 | RNVC: 9
R142PC26: RNCC: 5 | RNVC: 9
R143ITEM6A: RNCC: 5 | RNVC: 9
R129PC26: RNCC: 5 | RNVC: 9
R131PC26: RNCC: 5 | RNVC: 9
R138PC26: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-186-3356
Single Disk Brake

011863356
108766200HLB: RNCC: 3 | RNVC: 2
1087766200HLB: RNCC: 5 | RNVC: 9
1087662H0HLB: RNCC: 5 | RNVC: 9
1-087-662-H0-HL: RNCC: C | RNVC: 1

9 Aug 1984

3040-01-675-7500
Shaft Lower

016757500
E541-0252-62: RNCC: 3 | RNVC: 1
36-37-7818KS: RNCC: 5 | RNVC: 1
167-8483300-62: RNCC: 5 | RNVC: 1
8483300-62-MOD36-37-7818KS: RNCC: 5 | RNVC: 1
167-8483300-62L1: RNCC: 5 | RNVC: 2
36-37-7818KSL1: RNCC: 5 | RNVC: 2
8483300-62-MOD36-37-7818KSL1: RNCC: 5 | RNVC: 2
E541-0252-62L1: RNCC: 5 | RNVC: 2

25 Sep 2018

3040-01-454-5123
Straight Shaft

014545123
751-6402951 ITEM 1: RNCC: 3 | RNVC: 2
751-6402401-52: RNCC: C | RNVC: 1
751-6402402 ITEM 52: RNCC: C | RNVC: 1
751-6402403-52: RNCC: C | RNVC: 1
751-6402407 FIND 52: RNCC: C | RNVC: 1
751-6402406 ITEM 52: RNCC: C | RNVC: 1
751-6402407-52: RNCC: C | RNVC: 1
751-6402404 ITEM 52: RNCC: C | RNVC: 1
751-6402405-52: RNCC: C | RNVC: 1
751-6402403 FIND 52: RNCC: C | RNVC: 1

2 Apr 1998

3040-01-669-1028
Rigid Connecting Link

016691028
140442: RNCC: 3 | RNVC: 2
140442: RNCC: 5 | RNVC: 2
62400-0017E01: RNCC: 5 | RNVC: 9
62400-0017E01: RNCC: 7 | RNVC: 2

20 Dec 2017

3040-01-614-9782
Breather

016149782
339-1048: RNCC: 3 | RNVC: 2
339-1048: RNCC: 5 | RNVC: 2
10464058: RNCC: 6 | RNVC: 9

20 Dec 2012

3040-01-474-3768
Rotary Electro-Mechanical Actuator

014743768
4086391: RNCC: 1 | RNVC: 3
442044: RNCC: 3 | RNVC: 3
442044-4: RNCC: 5 | RNVC: 3

2 May 2000

3040-01-703-1445
Straight Shaft

017031445
4011-6: RNCC: 3 | RNVC: 2

19 Aug 2022

3040-01-703-0200
Planetary Gears Carrier

017030200
29501047: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-00-036-3415
Turbine And P Shaft

000363415
29163: RNCC: 3 | RNVC: 9
CA6463PC532: RNCC: 5 | RNVC: 2
CA6877PC532: RNCC: 5 | RNVC: 2
CA6466PC532: RNCC: 5 | RNVC: 2
CA6461-532: RNCC: 5 | RNVC: 2
E3133PC191: RNCC: 5 | RNVC: 9
CA6877PC532: RNCC: 5 | RNVC: 9
CA6463PC532: RNCC: 5 | RNVC: 9
E2810PC191: RNCC: 5 | RNVC: 9
E2802PC191: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-702-4926
Control Cam

017024926
1159LM51032-11: RNCC: 3 | RNVC: 2

11 Jul 2022

3040-01-707-5257
Straight Shaft Assembly

017075257
LAN-11-803-WAD: RNCC: 3 | RNVC: 2

7 Feb 2023

3040-01-707-5993
Spur Gearshaft

017075993
X0606-01036-101: RNCC: 3 | RNVC: 2
X0606-01036: RNCC: D | RNVC: 9
PL X0606-01036: RNCC: D | RNVC: 9

10 Feb 2023

3040-01-706-3066
Piston Ring

017063066
F.US200208.25.3: RNCC: 3 | RNVC: 2

15 Nov 2022

3040-01-707-5238
Straight Shaft Assembly

017075238
LAN-11-802-WAD: RNCC: 3 | RNVC: 2

7 Feb 2023

3040-01-706-8530
Ball Joint

017068530
7082422: RNCC: 3 | RNVC: 2

23 Dec 2022

3040-01-706-8485
Push-Pull Control Assembly

017068485
21V42DF-3-84: RNCC: 3 | RNVC: 2

22 Dec 2022

3040-01-701-5227
Shouldered Shaft

017015227
4000-6182: RNCC: 3 | RNVC: 2
798C-10017 SHEET 2 OF 4: RNCC: 5 | RNVC: 2
506-90-23: RNCC: 5 | RNVC: 9

20 May 2022

3040-01-706-0026
Manual Control Lever Assembly

017060026
725-8838197-A4: RNCC: 3 | RNVC: 2
LOA007265-A4: RNCC: 5 | RNVC: 2

24 Oct 2022

3040-01-707-4500
Pawl

017074500
474622200171: RNCC: 3 | RNVC: 2

2 Feb 2023

3040-01-707-6453
Shaft Collar

017076453
W211323-625: RNCC: 3 | RNVC: 2
KGW211323-625: RNCC: 5 | RNVC: 2
AP00192-14: RNCC: 5 | RNVC: 2

14 Feb 2023

3040-01-707-4656
Straight Shaft

017074656
13071333: RNCC: 3 | RNVC: 2

3 Feb 2023

3040-01-706-7927
Counterbalance Weight

017067927
6539155-2: RNCC: 3 | RNVC: 2

19 Dec 2022

3040-00-385-9483
Worm Shaft

003859483
1503398: RNCC: 3 | RNVC: 2
G7852PC84: RNCC: 5 | RNVC: 2
W65N7X1: RNCC: 5 | RNVC: 2
26J291PC120: RNCC: 5 | RNVC: 2
26J295PC103: RNCC: 5 | RNVC: 2
800840PC84: RNCC: 5 | RNVC: 2
1503398: RNCC: 5 | RNVC: 2
700404PC84: RNCC: 5 | RNVC: 2
800836PC84: RNCC: 5 | RNVC: 2
800840PC84: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-153-7662
Straight Shaft

001537662
W1223-3: RNCC: 3 | RNVC: 9
AB0070101401: RNCC: 5 | RNVC: 2
07-811H163: RNCC: 5 | RNVC: 2
W1223-3: RNCC: 5 | RNVC: 2
07-101401: RNCC: 5 | RNVC: 2
101401: RNCC: 5 | RNVC: 2
07-811H163: RNCC: 5 | RNVC: 9
AB0070101401: RNCC: 5 | RNVC: 9
62-2: RNCC: 5 | RNVC: 9
101401: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-614-7677
Remote Control Lever

016147677
6D69470H08: RNCC: 3 | RNVC: 2
6D69470-8: RNCC: 5 | RNVC: 9
6D69470H083: RNCC: 5 | RNVC: 9

14 Dec 2012

3040-01-613-2293
Shaft Retaining Plate

016132293
31.03.12.024H: RNCC: 3 | RNVC: 2
310312024H: RNCC: 3 | RNVC: 9
31.03.12.024H: RNCC: 5 | RNVC: 9

2 Nov 2012

3040-00-360-3902
Hub Clamp

003603902
4B4715: RNCC: 3 | RNVC: 2
117: RNCC: 3 | RNVC: 2
X117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
18Z94: RNCC: 5 | RNVC: 2
0P691: RNCC: 5 | RNVC: 2
TDC117: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-422-5622
Shouldered Shaft

004225622
AC3263-1: RNCC: 3 | RNVC: 9
3N82ALT1PC637: RNCC: 5 | RNVC: 9
3N83ALT1PC637: RNCC: 5 | RNVC: 9
3N111PC637: RNCC: 5 | RNVC: 9
3N112PC637: RNCC: 5 | RNVC: 9
3N21-2PC637: RNCC: 5 | RNVC: 9
3N40PC637: RNCC: 5 | RNVC: 9
3N73PC637: RNCC: 5 | RNVC: 9
3N77PC637: RNCC: 5 | RNVC: 9
3N80PC637: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-193-4614
Reduction Wormshaft

011934614
10308/40/1 SDO: RNCC: 3 | RNVC: 2
R22-4RD01/40-1: RNCC: 3 | RNVC: 2
RW1/820358 PC 36: RNCC: 5 | RNVC: 2

3 Nov 1984

3040-01-352-3837
Flexible Shaft Assembly Casing

013523837
446900-1E-44: RNCC: 3 | RNVC: 2
5818152-44: RNCC: 5 | RNVC: 2
HXOSH12AZ1: RNCC: 5 | RNVC: 2
3040013523837: RNCC: 5 | RNVC: 9
1867920: RNCC: 7 | RNVC: 2
1867920: RNCC: 7 | RNVC: 9

25 Jan 1992

3040-00-976-4718
Linear Actuating Cylinder Piston

009764718
607024: RNCC: 3 | RNVC: 2
607024: RNCC: 3 | RNVC: 9
291ND5063: RNCC: 5 | RNVC: 2
ND5063PC291: RNCC: 5 | RNVC: 2
291ND5063: RNCC: 5 | RNVC: 9
607024: RNCC: 5 | RNVC: 9
ND5063PC291: RNCC: 5 | RNVC: 9
607024: RNCC: 5 | RNVC: 9
ND5063PC291: RNCC: 5 | RNVC: 9
291ND5063: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-201-6160
Manual Control Lever

012016160
3750AS700-14: RNCC: 3 | RNVC: 2
PDG7846-1: RNCC: 3 | RNVC: 9

20 Feb 1985

3040-01-538-4889
Straight Shaft

015384889
5133806: RNCC: 3 | RNVC: 2
5133806: RNCC: 5 | RNVC: 2
5133806-NP: RNCC: 5 | RNVC: 2
10366844: RNCC: 6 | RNVC: 9

23 Mar 2006

3040-01-553-0488
Linear Actuating Cylinder

015530488
3005482: RNCC: 3 | RNVC: 2
3005482 REV L: RNCC: 5 | RNVC: 2
3007968 REV N/CFIND NO.7: RNCC: 5 | RNVC: 2
3008022 REV A PC7: RNCC: 5 | RNVC: 2
3005484/FIND 6: RNCC: 5 | RNVC: 9
3005487/FIND 15: RNCC: 5 | RNVC: 9
3005482: RNCC: 5 | RNVC: 9

3 Jul 2007

3040-01-516-2390
Nonaircraft Mechanical Actuator

015162390
924012: RNCC: 3 | RNVC: 2
924012 (DISTRIBUTOR): RNCC: 3 | RNVC: 2
924012: RNCC: 3 | RNVC: 2
V5D10038-01: RNCC: 5 | RNVC: 2
V1E10526 ITEM 35: RNCC: 5 | RNVC: 2
924012: RNCC: 5 | RNVC: 9

24 Dec 2003

3040-01-702-7090
Rigid Connecting Link

017027090
1001-0201-500-001: RNCC: 3 | RNVC: 2
27-01-03 FIG 1 ITEM 1: RNCC: D | RNVC: 9
27-01-03 REV 0: RNCC: D | RNVC: 9

21 Jul 2022

3040-01-700-9527
Straight Shaft

017009527
470M132-1: RNCC: 3 | RNVC: 2

21 Apr 2022

3040-01-595-6486
Ballscrew Assembly

015956486
7383858-H5471906-002: RNCC: 3 | RNVC: 1
H547-0001-H5471906-002: RNCC: 5 | RNVC: 1
H5471906-002: RNCC: 5 | RNVC: 1
H547-1906-2: RNCC: 5 | RNVC: 1
167-7384259-2: RNCC: 5 | RNVC: 1
H547-0001-H5471906-002D4: RNCC: 5 | RNVC: 2
H547-1906-2D4: RNCC: 5 | RNVC: 2
H5471906-002D4: RNCC: 5 | RNVC: 2
167-7384259-2D4: RNCC: 5 | RNVC: 2
7383858-H5471906-002D4: RNCC: 5 | RNVC: 2

4 May 2011

3040-01-648-6931
Control Cable Assembly

016486931
CC34315: RNCC: 3 | RNVC: 2
307062: RNCC: 5 | RNVC: 2
000-33072-0375: RNCC: 5 | RNVC: 2
307062: RNCC: 5 | RNVC: 9

2 Oct 2015

3040-00-740-9781
Remote Control Lever

007409781
5239504: RNCC: 3 | RNVC: 2
PGF8938A: RNCC: 3 | RNVC: 2
0003436527: RNCC: 5 | RNVC: 2
3436527: RNCC: 5 | RNVC: 2
7409781: RNCC: 5 | RNVC: 2
5239504: RNCC: 5 | RNVC: 9
PGF8938: RNCC: 5 | RNVC: 9
PGF8938A: RNCC: 5 | RNVC: 9
1775N2: RNCC: 5 | RNVC: 9
KC9452: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-793-5151
Shouldered Shaft

007935151
737044: RNCC: 3 | RNVC: 2
12ND5014: RNCC: 5 | RNVC: 9
12ND6792: RNCC: 5 | RNVC: 9
ND6792PC12: RNCC: 5 | RNVC: 9
H-8413 PIECE 1: RNCC: 5 | RNVC: 9
NC-4215: RNCC: 5 | RNVC: 9
NH-6585 PIECE 12: RNCC: 5 | RNVC: 9
NH7407PC12: RNCC: 5 | RNVC: 9
737044: RNCC: C | RNVC: 1
12ND5014: RNCC: C | RNVC: 1

1 Jan 1962

3040-01-302-6683
Rigid Connecting Link

013026683
353 7646-002: RNCC: 3 | RNVC: 2
92048-991: RNCC: 3 | RNVC: 9
353 7646-002: RNCC: 5 | RNVC: 2
3537646-002: RNCC: 5 | RNVC: 2
012301: RNCC: 5 | RNVC: 2
HE012301: RNCC: 5 | RNVC: 2
92048-991: RNCC: 5 | RNVC: 9
3537646-002: RNCC: 5 | RNVC: 9

17 Jun 1989

3040-01-451-5800
Straight Shaft

014515800
211068972: RNCC: 3 | RNVC: 1
751-6402302 ITEM 5: RNCC: 5 | RNVC: 1
751-6402315-1: RNCC: 5 | RNVC: 1
751-6402301 ITEM5: RNCC: 5 | RNVC: 1
751-6402315 ITEM1: RNCC: 5 | RNVC: 1
211068972L1: RNCC: 5 | RNVC: 2
751-6402301 FIND 5L1: RNCC: 5 | RNVC: 2
751-6402302 FIND5: RNCC: 5 | RNVC: 2
751-6402302 ITEM 5L1: RNCC: 5 | RNVC: 2
751-6402301 ITEM5L1: RNCC: 5 | RNVC: 2

21 Dec 1997

3040-00-385-9488
Helical Gearshaft

003859488
W98AS: RNCC: 3 | RNVC: 9
G7613PC72: RNCC: 5 | RNVC: 2
G7939PC84: RNCC: 5 | RNVC: 2
G7988PC84: RNCC: 5 | RNVC: 2
G5965PC72: RNCC: 5 | RNVC: 2
G6628PC84: RNCC: 5 | RNVC: 2
G6634PC84: RNCC: 5 | RNVC: 2
G6726PC84: RNCC: 5 | RNVC: 2
G7641PC72: RNCC: 5 | RNVC: 2
G7657PC82: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-388-3733
Straight Shaft

003883733
72512: RNCC: 3 | RNVC: 2
130893: RNCC: 5 | RNVC: 2
842964: RNCC: 5 | RNVC: 2
8MTH7111: RNCC: 5 | RNVC: 9
71860R1: RNCC: 5 | RNVC: 9
72512: RNCC: 5 | RNVC: 9
D76036: RNCC: 5 | RNVC: 9
T98-3: RNCC: 5 | RNVC: 9
SK4444-3: RNCC: 5 | RNVC: 9
53704: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-476-0511
Linear Actuating Cylinder Assembly

014760511
9264717: RNCC: 3 | RNVC: 2
PG200674J: RNCC: 3 | RNVC: 9
9173705EX: RNCC: 5 | RNVC: 9
9173705JEK: RNCC: 5 | RNVC: 9
AT250456: RNCC: 5 | RNVC: 9

23 Jun 2000

3040-01-195-3663
Ball Joint

011953663
88911387: RNCC: 3 | RNVC: 2
9767112: RNCC: 5 | RNVC: 9
3986009: RNCC: 5 | RNVC: 9
9764615: RNCC: 5 | RNVC: 9
10268: RNCC: 5 | RNVC: 9
9762023: RNCC: 5 | RNVC: 9
339781: RNCC: 5 | RNVC: 9
339781: RNCC: 5 | RNVC: 9
9764615: RNCC: 5 | RNVC: 9
9767112: RNCC: 5 | RNVC: 9

28 Nov 1984

3040-00-420-2023
Positioning Shoe

004202023
S805JE3464: RNCC: 3 | RNVC: 2
SG2003PC16: RNCC: 5 | RNVC: 2
SG2185: RNCC: 5 | RNVC: 2
SG2188: RNCC: 5 | RNVC: 2
SG2191: RNCC: 5 | RNVC: 2
SG2194: RNCC: 5 | RNVC: 2
SG1736PC16: RNCC: 5 | RNVC: 2
SG1739PC16: RNCC: 5 | RNVC: 2
SG1741PC16: RNCC: 5 | RNVC: 2
SG1744PC16: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-706-3523
Flexible Drive Shaft

017063523
92361-05801-113: RNCC: 3 | RNVC: 2

17 Nov 2022

3040-01-706-3706
Gearbox Parts Kit

017063706
128-9691: RNCC: 3 | RNVC: 2

18 Nov 2022

3040-01-706-8385
Ball Joint

017068385
BH-40 LR II: RNCC: 3 | RNVC: 2

22 Dec 2022

3040-01-707-5488
Linear Actuating Cylinder

017075488
109-8832: RNCC: 3 | RNVC: 2

8 Feb 2023

3040-01-701-7482
Rigid Connecting Link

017017482
B001262L01003-1: RNCC: 3 | RNVC: 2

6 Jun 2022

3040-00-499-7145
Friction Lining

004997145
514510: RNCC: 3 | RNVC: 2
54J762ITEM3: RNCC: 5 | RNVC: 2
714798ITEM2: RNCC: 5 | RNVC: 2
S514510: RNCC: 5 | RNVC: 2
1JH624ITEM3: RNCC: 5 | RNVC: 2
35J738ITEM3: RNCC: 5 | RNVC: 2
35J739ITEM3: RNCC: 5 | RNVC: 2
45J684ITEM3: RNCC: 5 | RNVC: 2
S6307H3121098ITEM3: RNCC: 5 | RNVC: 2
AV14S2000-399218ITEM3: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-01-377-7423
Push-Pull Control Assembly

013777423
3009-075-1372: RNCC: 3 | RNVC: 2
032377-003-45FT: RNCC: 5 | RNVC: 9
33C45FT: RNCC: 5 | RNVC: 9
32377-003-45FT: RNCC: 5 | RNVC: 9
33-C-540IN: RNCC: 5 | RNVC: 9
D032377-003-45FT: RNCC: 5 | RNVC: 9
032377-003-45FT: RNCC: 5 | RNVC: 9
33C45FT: RNCC: 5 | RNVC: 9
D032377-003-45FT: RNCC: 5 | RNVC: 9
32377-003-45FT: RNCC: 5 | RNVC: 9

24 Jul 1993

3040-01-256-2255
Flexible Shaft Assembly

012562255
57714-02: RNCC: 3 | RNVC: 2
57714-2: RNCC: 5 | RNVC: 9

3 Jun 1987

3040-00-367-8843
Friction Lining

003678843
071Z8A: RNCC: 3 | RNVC: 2
6B1204: RNCC: 3 | RNVC: 2
112B10: RNCC: 3 | RNVC: 2
112B10: RNCC: 5 | RNVC: 2
07128: RNCC: 5 | RNVC: 2
07128A: RNCC: 5 | RNVC: 2
835107: RNCC: 5 | RNVC: 2
R14161-112B10: RNCC: 5 | RNVC: 9
112B10: RNCC: 5 | RNVC: 9
112B10: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-367-0174
Shaft Collar

003670174
A1A156A100PC39: RNCC: 3 | RNVC: 2
17Y2388PC39: RNCC: 5 | RNVC: 2
5000S4803-529926: RNCC: 5 | RNVC: 2
5000S4803-529926PC39: RNCC: 5 | RNVC: 2
S4803-465689PC39: RNCC: 5 | RNVC: 2
A1A156A103PC39: RNCC: 5 | RNVC: 2
A1A222A46PC39: RNCC: 5 | RNVC: 2
D6A27A: RNCC: 5 | RNVC: 2
A1A222A38PC39: RNCC: 5 | RNVC: 2
A1A156A100PC39: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-01-325-9081
Manual Control Lever

013259081
D305450 PIECE 87: RNCC: 3 | RNVC: 9
E108496 PIECE 87: RNCC: 5 | RNVC: 2
E108860 PIECE 87: RNCC: 5 | RNVC: 2
E108165 PIECE 87: RNCC: 5 | RNVC: 2
E108186 PIECE 87: RNCC: 5 | RNVC: 2
E108496 PIECE 87: RNCC: 5 | RNVC: 9
E108860 PIECE 87: RNCC: 5 | RNVC: 9
D105873: RNCC: 5 | RNVC: 9
E108165 PIECE 87: RNCC: 5 | RNVC: 9
E108186 PIECE 87: RNCC: 5 | RNVC: 9

13 Sep 1990

3040-00-820-1719
Shaft Collar

008201719
SC87MODIFIED: RNCC: 3 | RNVC: 1
7064165P1: RNCC: 3 | RNVC: 2
7064165P1: RNCC: 5 | RNVC: 9
7064165: RNCC: D | RNVC: 9
504-009: RNCC: E | RNVC: 8

1 Jan 1962

3040-01-395-4626
Control Cam

013954626
211051287: RNCC: 3 | RNVC: 1
211090179L1: RNCC: 5 | RNVC: 1
211051287L1: RNCC: 5 | RNVC: 1
211090179: RNCC: 5 | RNVC: 1
595-6401267 ITEM 82: RNCC: 5 | RNVC: 1
595-6401641 ASSEMBLY 99: RNCC: 5 | RNVC: 1
595-6401641-AY99: RNCC: 5 | RNVC: 1
6401267ITEM82: RNCC: 5 | RNVC: 1
595-6401267ITEM82L1: RNCC: 5 | RNVC: 1
595-6401641-AY99L1: RNCC: 5 | RNVC: 1

30 Aug 1994

3040-00-334-3751
Thrust Shoe

003343751
SG1034PC16: RNCC: 3 | RNVC: 2
SG1947PC16: RNCC: 3 | RNVC: 2
S805BB: RNCC: 3 | RNVC: 2
SG1791PC16: RNCC: 3 | RNVC: 2
SG1916PC16: RNCC: 3 | RNVC: 2
SG1919PC16: RNCC: 3 | RNVC: 2
SG1351PC16: RNCC: 3 | RNVC: 2
SG1788PC16: RNCC: 3 | RNVC: 2
S805BE: RNCC: 3 | RNVC: 2
3315A: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-700-4779
Counterbalance Weight

017004779
5127T65P01: RNCC: 3 | RNVC: 2

29 Mar 2022

3040-00-036-4010
Friction Lining

000364010
327461: RNCC: 3 | RNVC: 2
321225: RNCC: 5 | RNVC: 2
332407SH2ITEM3: RNCC: 5 | RNVC: 2
332366SH1ITEM46: RNCC: 5 | RNVC: 2
322044PC48: RNCC: 5 | RNVC: 2
322660PC71: RNCC: 5 | RNVC: 2
322661PC71: RNCC: 5 | RNVC: 2
322661PC71: RNCC: 5 | RNVC: 9
327461: RNCC: 5 | RNVC: 9
332366SH1ITEM46: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-768-1853
Worm Shaft

007681853
737121: RNCC: 3 | RNVC: 2
737121: RNCC: 3 | RNVC: 9
NH6714PC415: RNCC: 5 | RNVC: 9
NF6095PC415: RNCC: 5 | RNVC: 9
NH7407PC415: RNCC: 5 | RNVC: 9
NH6357PC415: RNCC: 5 | RNVC: 9
737121: RNCC: 5 | RNVC: 9
F3179389REVDPC415: RNCC: 5 | RNVC: 9
737121: RNCC: 5 | RNVC: 9
NH6688PC415: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-071-1228
Rigid Connecting Link

010711228
16K2857-3: RNCC: 3 | RNVC: 2
3040PL1960302: RNCC: 6 | RNVC: 9

29 Jan 1979

3040-00-398-8546
Shaft Retaining Plate

003988546
SK133650: RNCC: 3 | RNVC: 2
SL7774PC20: RNCC: 3 | RNVC: 2
SL7487PC75: RNCC: 3 | RNVC: 2
SL5683PC75: RNCC: 5 | RNVC: 2
SL4629PC75: RNCC: 5 | RNVC: 2
SL4630PC75: RNCC: 5 | RNVC: 2
SL5686PC75: RNCC: 5 | RNVC: 2
SL5840PC75: RNCC: 5 | RNVC: 2
SL5843PC75: RNCC: 5 | RNVC: 2
SL4201PC75: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-668-9050
Rigid Connecting Link

016689050
NAS356: RNCC: 3 | RNVC: 1
NAS356-84-1041: RNCC: 3 | RNVC: 2

12 Dec 2017

3040-00-395-0150
Shifter Shoe

003950150
V308PC241: RNCC: 3 | RNVC: 2
477-16F: RNCC: 3 | RNVC: 2
477-16F: RNCC: 5 | RNVC: 9
477-35PC477-16F: RNCC: 5 | RNVC: 9
478-124PC478-30T: RNCC: 5 | RNVC: 9
478-141PC478-30T: RNCC: 5 | RNVC: 9
478-143PC478-30T: RNCC: 5 | RNVC: 9
477-52PC477-16F: RNCC: 5 | RNVC: 9
477-58PC477-16F: RNCC: 5 | RNVC: 9
478-96PC478-30T: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-394-8718
Handwheel Shaft

003948718
25J553PC119: RNCC: 3 | RNVC: 2
28J373PC81: RNCC: 3 | RNVC: 2
28J398PC172: RNCC: 3 | RNVC: 2
1387578: RNCC: 3 | RNVC: 2
25J427PC119: RNCC: 3 | RNVC: 2
25J485PC81: RNCC: 3 | RNVC: 2
25J488PC26: RNCC: 3 | RNVC: 2
28J375PC26: RNCC: 3 | RNVC: 2
1387578: RNCC: 3 | RNVC: 2
25J641PC119: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-220-0685
Disk Brake Shoe

012200685
J213204: RNCC: 3 | RNVC: 2
F520C001: RNCC: 5 | RNVC: 9

8 Nov 1985

3040-00-413-4243
Control Cam

004134243
N3-19851-196FM5101: RNCC: 3 | RNVC: 2
G9B3-45PC24: RNCC: 5 | RNVC: 2
N3-11336PC425: RNCC: 5 | RNVC: 2
N3-11337PC425: RNCC: 5 | RNVC: 2
N3-11372PC428: RNCC: 5 | RNVC: 2
N3-11382PC428: RNCC: 5 | RNVC: 2
N3-11386PC428: RNCC: 5 | RNVC: 2
N3-11479PC423: RNCC: 5 | RNVC: 2
N3-11695PC421: RNCC: 5 | RNVC: 2
N3-12285PC428: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-463-6970
Remote Control Lever

004636970
37341D: RNCC: 3 | RNVC: 2
4B4703: RNCC: 3 | RNVC: 2
103F: RNCC: 3 | RNVC: 2
XTD103F: RNCC: 5 | RNVC: 2
0P682: RNCC: 5 | RNVC: 2
11182: RNCC: 5 | RNVC: 2
3H0436: RNCC: 5 | RNVC: 2
NDP1011PC13: RNCC: 5 | RNVC: 2
1-366: RNCC: 5 | RNVC: 2
TD103F: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-399-4095
Thrust Bearing Shoe

003994095
28-2757-1: RNCC: 3 | RNVC: 2
462757BPC1T03: RNCC: 3 | RNVC: 2
462772BPC1T03: RNCC: 3 | RNVC: 2
462772PC1T03: RNCC: 3 | RNVC: 2
462772PC1T03: RNCC: 3 | RNVC: 2
700242PC1T03: RNCC: 5 | RNVC: 2
28-2757-1: RNCC: 5 | RNVC: 2
462757PC1T03: RNCC: 5 | RNVC: 2
28-2757-1: RNCC: 5 | RNVC: 2
462772BPC1T03: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-291-5847
Straight Shaft

012915847
A-15252: RNCC: 3 | RNVC: 2
A15252: RNCC: 3 | RNVC: 9
10-3010 ITEM 24: RNCC: 5 | RNVC: 9

30 Dec 1988

3040-01-451-5802
Straight Shaft

014515802
211033414: RNCC: 3 | RNVC: 1
751-6402313-1: RNCC: 5 | RNVC: 1
751-6402301 ITEM3: RNCC: 5 | RNVC: 1
751-6402302 ITEM 3: RNCC: 5 | RNVC: 1
751-6402302 FIND3: RNCC: 5 | RNVC: 1
751-6402313 ITEM1: RNCC: 5 | RNVC: 1
211033414L1: RNCC: 5 | RNVC: 2
751-6402301 FIND 3L1: RNCC: 5 | RNVC: 2
751-6402301 ITEM3L1: RNCC: 5 | RNVC: 2
751-6402302 FIND3L1: RNCC: 5 | RNVC: 2

21 Dec 1997

3040-01-451-3531
Shouldered Shaft

014513531
211033411: RNCC: 3 | RNVC: 1
751-6402301 FIND 7: RNCC: 5 | RNVC: 1
751-6402302 FIND 7: RNCC: 5 | RNVC: 1
751-6402301 ITEM 7: RNCC: 5 | RNVC: 1
751-6402317 ITEM1: RNCC: 5 | RNVC: 1
751-6402301 FIND 7L1: RNCC: 5 | RNVC: 2
211033411L1: RNCC: 5 | RNVC: 2
751-6402317 ITEM1: RNCC: 5 | RNVC: 2
751-6402317 ITEM1L1: RNCC: 5 | RNVC: 2
751-6402302 ITEM 7L1: RNCC: 5 | RNVC: 2

13 Dec 1997

3040-00-337-6979
Mechanical Drive Housing

003376979
8364436: RNCC: 3 | RNVC: 2
2530003376979: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-01-451-5798
Straight Shaft

014515798
211033415: RNCC: 3 | RNVC: 1
751-6402302-2: RNCC: 5 | RNVC: 1
751-6402301 ITEM 2: RNCC: 5 | RNVC: 1
751-6402302 ITEM 2: RNCC: 5 | RNVC: 1
751-6402312-1: RNCC: 5 | RNVC: 1
751-6402301-2: RNCC: 5 | RNVC: 1
751-6402302 FIND 2: RNCC: 5 | RNVC: 1
751-6402312 ITEM1: RNCC: 5 | RNVC: 1
751-6402312 ITEM1L1: RNCC: 5 | RNVC: 2
751-6402312-1L1: RNCC: 5 | RNVC: 2

21 Dec 1997

3040-00-399-4093
Thrust Bearing Shoe

003994093
21-2839-1: RNCC: 3 | RNVC: 2
261733: RNCC: 3 | RNVC: 2
32J645PC48: RNCC: 3 | RNVC: 2
462839A1T03: RNCC: 3 | RNVC: 2
462839A1T03: RNCC: 5 | RNVC: 2
462839PC1T03: RNCC: 5 | RNVC: 2
21-2839-1: RNCC: 5 | RNVC: 2
21-2839-1: RNCC: 5 | RNVC: 2
32J645PC48: RNCC: 5 | RNVC: 2
21-2839-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-127-3964
Thrust Bearing Shoe

001273964
175B46CX1: RNCC: 3 | RNVC: 2
175B46CX1: RNCC: 3 | RNVC: 9
217302PC46: RNCC: 5 | RNVC: 9
W156NT500X17PC46: RNCC: 5 | RNVC: 9
W156NT500X7PC46: RNCC: 5 | RNVC: 9
W254RTM500X5PC46: RNCC: 5 | RNVC: 9
215183PC66: RNCC: 5 | RNVC: 9
216878PC46: RNCC: 5 | RNVC: 9
217301ITEM4: RNCC: 5 | RNVC: 9
217301PC46: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-394-8357
Thrust Bearing Shoe

003948357
D15-621PPC640T0643: RNCC: 3 | RNVC: 2
461966BPC2T04: RNCC: 5 | RNVC: 2
461966CPC2T04: RNCC: 5 | RNVC: 2
462246BPC2T04: RNCC: 5 | RNVC: 2
462246CPC2T04: RNCC: 5 | RNVC: 2
462246PC2T04: RNCC: 5 | RNVC: 2
462752PC2T04: RNCC: 5 | RNVC: 2
462973PC732T0734: RNCC: 5 | RNVC: 2
5-2222-2: RNCC: 5 | RNVC: 2
5-2222-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-374-6076
Manual Control Lever

003746076
CA530: RNCC: 3 | RNVC: 9
4108P11: RNCC: 5 | RNVC: 2
10S0938: RNCC: 5 | RNVC: 2
1SJ15: RNCC: 5 | RNVC: 2
8B2205: RNCC: 5 | RNVC: 2
32430H: RNCC: 5 | RNVC: 9
2092229: RNCC: 5 | RNVC: 9
153404: RNCC: 5 | RNVC: 9
C530: RNCC: 5 | RNVC: 9
C530: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-391-6301
Wiper Shaft

003916301
KS1385WD5PC15A: RNCC: 3 | RNVC: 2
KS1385PD12-15: RNCC: 3 | RNVC: 2
KS1150DCSPC15: RNCC: 5 | RNVC: 2
KS1250APC15: RNCC: 5 | RNVC: 2
KS1381PC15: RNCC: 5 | RNVC: 2
KS1385PD10PC15: RNCC: 5 | RNVC: 2
KS1385PD11PC15A: RNCC: 5 | RNVC: 2
KS1350HPC15: RNCC: 5 | RNVC: 2
KS1350MPC15: RNCC: 5 | RNVC: 2
KS1285PD4PC15: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-454-2263
Bell Crank

004542263
007852670: RNCC: 3 | RNVC: 2
007852670: RNCC: 3 | RNVC: 9
533K316: RNCC: 5 | RNVC: 2
07-852670: RNCC: 5 | RNVC: 2
852670: RNCC: 5 | RNVC: 2
852670: RNCC: 5 | RNVC: 2
07-852670: RNCC: 5 | RNVC: 9
852670: RNCC: 5 | RNVC: 9
852670: RNCC: 5 | RNVC: 9
155960: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-388-6888
Manual Control Lever

003886888
D15-655P123: RNCC: 3 | RNVC: 2
D15-661BPC123: RNCC: 3 | RNVC: 2
D15-661IPC123: RNCC: 3 | RNVC: 2
D15-661JPC123: RNCC: 3 | RNVC: 2
34816: RNCC: 3 | RNVC: 2
D15-661FPC123: RNCC: 5 | RNVC: 2
D15-394IPC123: RNCC: 5 | RNVC: 9
D15-394JPC123: RNCC: 5 | RNVC: 9
D15-443BPC123: RNCC: 5 | RNVC: 9
D15-443FPC123: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-447-8831
Shaft Retaining Plate

004478831
A1181: RNCC: 3 | RNVC: 2
321792: RNCC: 5 | RNVC: 2
62995D: RNCC: 5 | RNVC: 2
C107SP5PCA1181: RNCC: 5 | RNVC: 2
A1181: RNCC: 5 | RNVC: 2
X8317PCA1181: RNCC: 5 | RNVC: 9
X8317SPCA1181: RNCC: 5 | RNVC: 9
Z433PCA1181: RNCC: 5 | RNVC: 9
321792: RNCC: 5 | RNVC: 9
Z92: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-374-3899
Body Hub

003743899
676240: RNCC: 3 | RNVC: 9
5520E5004: RNCC: 5 | RNVC: 2
07-863624: RNCC: 5 | RNVC: 2
4C5031: RNCC: 5 | RNVC: 2
863624: RNCC: 5 | RNVC: 2
676240: RNCC: 5 | RNVC: 9
1121706: RNCC: 5 | RNVC: 9
1121706: RNCC: 5 | RNVC: 9
07-863624: RNCC: 5 | RNVC: 9
1121706: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-432-1945
Remote Control Lever

004321945
3048296: RNCC: 3 | RNVC: 2
AR51324: RNCC: 5 | RNVC: 9
AR6414: RNCC: 5 | RNVC: 9
AR-06413: RNCC: 5 | RNVC: 9
173718: RNCC: 5 | RNVC: 9
BM94851: RNCC: 5 | RNVC: 9
3024165: RNCC: 5 | RNVC: 9
AR51323: RNCC: 5 | RNVC: 9
173709: RNCC: 5 | RNVC: 9
3025539: RNCC: 5 | RNVC: 9

3 May 1971

3040-00-420-2011
Positioning Shoe

004202011
S805EE: RNCC: 3 | RNVC: 2
SG2154PC16: RNCC: 5 | RNVC: 9
S805EE: RNCC: 5 | RNVC: 9
SG1973PC16: RNCC: 5 | RNVC: 9
SG2042PC16: RNCC: 5 | RNVC: 9
SG2092PC16: RNCC: 5 | RNVC: 9
SG1746PC16: RNCC: 5 | RNVC: 9
SG1971PC16: RNCC: 5 | RNVC: 9
SG1881PC16: RNCC: 5 | RNVC: 9
SG1937PC16: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-393-7690
Linear Actuating Cylinder Assembly Parts Kit

013937690
211050269: RNCC: 3 | RNVC: 1
595-6401267 ITEM 141: RNCC: 5 | RNVC: 1
595-6401441 ITEM 1: RNCC: 5 | RNVC: 1
6401267 ITEM 141: RNCC: 5 | RNVC: 1
595-6401441-1: RNCC: 5 | RNVC: 1
6501267 IT 141: RNCC: 5 | RNVC: 1
6401441-1: RNCC: 5 | RNVC: 1
211050269L1: RNCC: 5 | RNVC: 2
595-6401441 ITEM 1L1: RNCC: 5 | RNVC: 2
595-6401441-1L1: RNCC: 5 | RNVC: 2

27 Jul 1994

3040-00-528-1998
Friction Lining

005281998
40-641: RNCC: 3 | RNVC: 2
SN3557PCDD5936: RNCC: 5 | RNVC: 2
NP4016-1PC4D: RNCC: 5 | RNVC: 2
NP4016-1PC51: RNCC: 5 | RNVC: 2
NP4016PC4D: RNCC: 5 | RNVC: 2
14U1466PCDD5936: RNCC: 5 | RNVC: 2
27U6421PC4D: RNCC: 5 | RNVC: 2
27U6421PC51: RNCC: 5 | RNVC: 2
27U6538PC51: RNCC: 5 | RNVC: 2
27U6420PC4D: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-532-3862
Linear Actuating Cylinder Piston

005323862
8689336: RNCC: 3 | RNVC: 2
3040005323862: RNCC: 6 | RNVC: 9
1015005323862: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-01-666-8243
Worm Shaft

016668243
P00060-1BT: RNCC: 3 | RNVC: 2
P 00060-1BT: RNCC: 5 | RNVC: 2

21 Sep 2017

3040-01-388-7101
Linear Actuating Cylinder Assembly

013887101
509E211RY/GP6 FACTORY ENGINEERIN: RNCC: 3 | RNVC: 2
509E211RY/GP6: RNCC: 3 | RNVC: 2
AS509E211RYG-6: RNCC: 3 | RNVC: 2
509E211RY/GP1: RNCC: 3 | RNVC: 9

6 Apr 1994

3040-00-410-9601
Remote Control Lever

004109601
B7TZ7A256A: RNCC: 3 | RNVC: 9
1797494: RNCC: 5 | RNVC: 2
897337R91: RNCC: 5 | RNVC: 2
6757361: RNCC: 5 | RNVC: 2
10863146: RNCC: 5 | RNVC: 2
4234T2: RNCC: 5 | RNVC: 9
897337R91: RNCC: 5 | RNVC: 9
897337R91: RNCC: 5 | RNVC: 9
867669: RNCC: 5 | RNVC: 9
B7TZ7A256A: RNCC: 5 | RNVC: 9

15 Aug 1969

3040-01-703-0913
Planetary Gears Carrier

017030913
29544813: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-01-701-8578
Remote Control Lever

017018578
6147085: RNCC: 3 | RNVC: 2

13 Jun 2022

3040-00-127-3965
Set Shoe

001273965
Y175B47CX1-142/165-002: RNCC: 3 | RNVC: 2
Y175B47CX1-142/165-002: RNCC: 3 | RNVC: 9
W254RTM500X5PC47: RNCC: 5 | RNVC: 9
W254RTM500X6PC47: RNCC: 5 | RNVC: 9
Y175B47CX1-229: RNCC: 5 | RNVC: 9
216850PC47: RNCC: 5 | RNVC: 9
Y242302: RNCC: 5 | RNVC: 9
W156NT500X17PC47: RNCC: 5 | RNVC: 9
W242316PC47: RNCC: 5 | RNVC: 9
217301ITEM5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-7714
Multiple Gears Gearshaft

007347714
10092R1: RNCC: 3 | RNVC: 2
62-30-9: RNCC: 5 | RNVC: 2
T406-3: RNCC: 5 | RNVC: 2
100092R1: RNCC: 5 | RNVC: 2
7347714: RNCC: 5 | RNVC: 2
62-30-9: RNCC: 5 | RNVC: 2
2345414: RNCC: 5 | RNVC: 9
100092R1: RNCC: 5 | RNVC: 9
316696: RNCC: 5 | RNVC: 9
801E679: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-216-9286
Thrust Bearing Shoe

002169286
462503BPC5T07: RNCC: 3 | RNVC: 2
6 1-4-2503-5: RNCC: 3 | RNVC: 2
61-4-2503-5: RNCC: 3 | RNVC: 2
462503AP5: RNCC: 5 | RNVC: 2
W5928159PC5T07: RNCC: 5 | RNVC: 2
6 1-4 2503-5: RNCC: 5 | RNVC: 2
W5938253PC35: RNCC: 5 | RNVC: 2
262629CPC5T07: RNCC: 5 | RNVC: 2
462503DPC5T07: RNCC: 5 | RNVC: 2
462504CPC5T07: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-499-3479
Shouldered Shaft

004993479
A5783: RNCC: 3 | RNVC: 2
5164460: RNCC: 5 | RNVC: 9
18438PCA5783: RNCC: 5 | RNVC: 9
X8708APC81: RNCC: 5 | RNVC: 9
N32250PC81: RNCC: 5 | RNVC: 9
5164460: RNCC: 5 | RNVC: 9
5164460: RNCC: 5 | RNVC: 9
N1062PCA5783: RNCC: 5 | RNVC: 9
5164460: RNCC: 5 | RNVC: 9
X8708APCA5783: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-177-9293
Rigid Connecting Link

001779293
8754274: RNCC: 3 | RNVC: 2
3040001779293: RNCC: 5 | RNVC: 9

29 Jan 1969

3040-01-702-4547
Control Cam

017024547
1159LM51032-12: RNCC: 3 | RNVC: 2
1159LM51032-16: RNCC: 3 | RNVC: 2
1159LM51032-15: RNCC: 3 | RNVC: 2

7 Jul 2022

3040-00-467-9846
Shouldered Shaft

004679846
232-49: RNCC: 3 | RNVC: 9
4801-521854PC27: RNCC: 5 | RNVC: 2
4801-593942PC27: RNCC: 5 | RNVC: 2
4801-877643PC27: RNCC: 5 | RNVC: 2
S4801-593942PC27: RNCC: 5 | RNVC: 2
S4801-877643PC27: RNCC: 5 | RNVC: 2
232-49KM0NEL: RNCC: 5 | RNVC: 9
232-20PC27: RNCC: 5 | RNVC: 9
232-49PCALL: RNCC: 5 | RNVC: 9
236-20PC27: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-176-0588
Rigid Connecting Link

011760588
LA64012PIECE8.44: RNCC: 3 | RNVC: 2
LA-64120: RNCC: 3 | RNVC: 2
LA64012-25PIECE8.44: RNCC: 5 | RNVC: 2
LA64012-25PIECE8.44: RNCC: 5 | RNVC: 9
LA-64120: RNCC: 5 | RNVC: 9
LA64012PIECE8.44: RNCC: 5 | RNVC: 9
LA64012-25PIECE8.44: RNCC: 5 | RNVC: 9
LA64012PIECE8.44: RNCC: 5 | RNVC: 9
LA-64120: RNCC: 5 | RNVC: 9
LA64012-25PIECE8.44: RNCC: 5 | RNVC: 9

7 Apr 1984

3040-00-469-1106
Shaft Collar

004691106
1503: RNCC: 3 | RNVC: 2
AB4651-1: RNCC: 3 | RNVC: 9
3N46PC1503: RNCC: 5 | RNVC: 9
3N47ALT6PC1503: RNCC: 5 | RNVC: 9
3N48ALT6PC1503: RNCC: 5 | RNVC: 9
3N69PC1503: RNCC: 5 | RNVC: 9
3N75PC1503: RNCC: 5 | RNVC: 9
3N82PC1503: RNCC: 5 | RNVC: 9
SG1771PC12: RNCC: 5 | RNVC: 9
SG1773PC12: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-097-5927
Shouldered Shaft

000975927
291B: RNCC: 3 | RNVC: 2
291B: RNCC: 3 | RNVC: 9
111214PC286: RNCC: 5 | RNVC: 2
107028PC286: RNCC: 5 | RNVC: 9
107414PC286: RNCC: 5 | RNVC: 9
91027PC286: RNCC: 5 | RNVC: 9
91127PC286: RNCC: 5 | RNVC: 9
110927PC286: RNCC: 5 | RNVC: 9
111228PC286: RNCC: 5 | RNVC: 9
113414PC286: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-752-1685
Helical Gearshaft

007521685
3891B730: RNCC: 3 | RNVC: 2
7521685: RNCC: 3 | RNVC: 2
801E562: RNCC: 5 | RNVC: 9
913747: RNCC: 5 | RNVC: 9
2658D5: RNCC: 5 | RNVC: 9
25207521685: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-703-0911
Multiple Gears Gearshaft

017030911
29535216: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-01-700-0837
Flexible Drive Shaft

017000837
7183-225H: RNCC: 3 | RNVC: 2

16 Mar 2022

3040-01-700-8642
Linear Actuating Cylinder Piston

017008642
HC5330-3: RNCC: 3 | RNVC: 2

18 Apr 2022

3040-01-701-1311
Shouldered Shaft

017011311
90.1353.00: RNCC: 3 | RNVC: 2

28 Apr 2022

3040-00-375-8523
Rigid Connecting Link

003758523
524605: RNCC: 3 | RNVC: 2
62472: RNCC: 5 | RNVC: 2
62646-2PC31: RNCC: 5 | RNVC: 2
62669-2PC31: RNCC: 5 | RNVC: 2
62472: RNCC: 5 | RNVC: 2
A62472PCALL: RNCC: 5 | RNVC: 2
62654-2PC31: RNCC: 5 | RNVC: 2
62669-6ITEM2: RNCC: 5 | RNVC: 2
62644-2PC53: RNCC: 5 | RNVC: 2
62644-2PC53: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-740-9644
Shouldered Shaft

007409644
5215794: RNCC: 3 | RNVC: 9
5215794: RNCC: 5 | RNVC: 2
7409644: RNCC: 5 | RNVC: 2
HCF1278: RNCC: 5 | RNVC: 9
HCF1278B: RNCC: 5 | RNVC: 9
HCF1278A: RNCC: 5 | RNVC: 9
HCF1278C: RNCC: 5 | RNVC: 9
HCF1278D: RNCC: 5 | RNVC: 9
HCF1278E: RNCC: 5 | RNVC: 9
HCF1278G: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-371-5003
Straight Shaft

003715003
005974: RNCC: 3 | RNVC: 2
007851138: RNCC: 5 | RNVC: 2
851138: RNCC: 5 | RNVC: 2
25606: RNCC: 5 | RNVC: 9
F218L-204: RNCC: 5 | RNVC: 9
5974: RNCC: 5 | RNVC: 9
5620E9116: RNCC: 5 | RNVC: 9
851138: RNCC: 5 | RNVC: 9
007851138: RNCC: 5 | RNVC: 9
09-5974: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-0153
Pump Plunger Shoe

007340153
11136: RNCC: 3 | RNVC: 2
73516: RNCC: 5 | RNVC: 2
205-2: RNCC: 5 | RNVC: 2
6945: RNCC: 5 | RNVC: 2
40934: RNCC: 5 | RNVC: 2
368804R1: RNCC: 5 | RNVC: 9
368804R1: RNCC: 5 | RNVC: 9
11136: RNCC: 5 | RNVC: 9
73025173: RNCC: 5 | RNVC: 9
25173: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-4439
Alignment Disk

016994439
AF-216445: RNCC: 3 | RNVC: 2

31 Jan 2022

3040-00-368-9971
Shouldered Shaft

003689971
8409PC24: RNCC: 3 | RNVC: 2
389887PCRS: RNCC: 5 | RNVC: 2
1760-381PC24: RNCC: 5 | RNVC: 2
7503PC120: RNCC: 5 | RNVC: 2
1762-381PC24: RNCC: 5 | RNVC: 2
25951PCRS: RNCC: 5 | RNVC: 2
8402PC24: RNCC: 5 | RNVC: 2
8404PC24: RNCC: 5 | RNVC: 2
375911ALT2PCRS: RNCC: 5 | RNVC: 2
1767-381PC24: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-148-5373
Ball Joint

001485373
1388630: RNCC: 3 | RNVC: 9
WW8453905PC14: RNCC: 5 | RNVC: 2
WW8453309PC18: RNCC: 5 | RNVC: 2
WW8454631PC10: RNCC: 5 | RNVC: 2
WW5547588PC26: RNCC: 5 | RNVC: 2
W6680743PC27: RNCC: 5 | RNVC: 2
WW5547587PC12: RNCC: 5 | RNVC: 2
WW5547597PC65: RNCC: 5 | RNVC: 2
WW8453310PC6T09: RNCC: 5 | RNVC: 2
3713131-75: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-123-0666
Rigid Connecting Link

001230666
NAS356: RNCC: 3 | RNVC: 1
NAS356-63-590: RNCC: 3 | RNVC: 2

1 Nov 1968

3040-00-389-8586
Turbine Shaft

003898586
4987: RNCC: 3 | RNVC: 2
D15-631GPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-631PPC523-524-525-534: RNCC: 5 | RNVC: 2
D15-631BPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-631QPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-631RPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-640QPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-640BPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-640GPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-640PPC523-524-526-534: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-343-7361
Thrust Bearing Shoe

003437361
DD381S41-292ALT2PC2T04: RNCC: 3 | RNVC: 2
262234PC5T07: RNCC: 5 | RNVC: 2
461884APC2T04: RNCC: 5 | RNVC: 2
461884BPC2T04: RNCC: 5 | RNVC: 2
461884PC2T04: RNCC: 5 | RNVC: 2
461885APC5T07: RNCC: 5 | RNVC: 2
461885BPC5T07: RNCC: 5 | RNVC: 2
461885CPC5T07: RNCC: 5 | RNVC: 2
461885PC5T07: RNCC: 5 | RNVC: 2
461886CPC2T04: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-517-0117
Flexible Control Casing

005170117
AN8016-3-61: RNCC: 2 | RNVC: 2
MIL-C-5638: RNCC: 4 | RNVC: 1

1 Jan 1963

3040-00-339-4544
Governor Shaft

003394544
1429174: RNCC: 3 | RNVC: 9
40J31PC8: RNCC: 5 | RNVC: 2
40J94PC163: RNCC: 5 | RNVC: 2
206DD0856LPC42: RNCC: 5 | RNVC: 2
LSD1S6100-650992PC8: RNCC: 5 | RNVC: 2
1429174: RNCC: 5 | RNVC: 2
12E947PC42: RNCC: 5 | RNVC: 2
1429174: RNCC: 5 | RNVC: 2
15E214PC42: RNCC: 5 | RNVC: 2
8G475PC1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-499-3808
Friction Lining

004993808
48-338-13: RNCC: 3 | RNVC: 2
503-4-2M1ALT1PC4: RNCC: 5 | RNVC: 2
503-4-3M1ALT1ITEM4: RNCC: 5 | RNVC: 2
503-4-3M1ALT1PC4: RNCC: 5 | RNVC: 2
503-4-5X1ALT2ITEM4: RNCC: 5 | RNVC: 2
5173ALT1PC5: RNCC: 5 | RNVC: 2
5306-14: RNCC: 5 | RNVC: 2
83221W1ITEM4: RNCC: 5 | RNVC: 2
287044PC5: RNCC: 5 | RNVC: 2
96804S6307-1897ALT1ITEM4: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-317-2522
Friction Lining

003172522
A989PC52: RNCC: 3 | RNVC: 2
15733: RNCC: 3 | RNVC: 2
A1115PC61: RNCC: 3 | RNVC: 2
A1161PC52: RNCC: 3 | RNVC: 2
A1210PC52: RNCC: 3 | RNVC: 2
A1065PC52: RNCC: 3 | RNVC: 2
A914PC52: RNCC: 3 | RNVC: 2
A975PC61: RNCC: 3 | RNVC: 2
A2038PC52: RNCC: 3 | RNVC: 2
A995PC61: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-353-0642
Manual Control Lever

003530642
FWX308: RNCC: 3 | RNVC: 2
F539-7: RNCC: 3 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
5328463: RNCC: 5 | RNVC: 2
A328463: RNCC: 5 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
5328463: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-336-9613
Intermediate Shaft

003369613
NAVY1245APC30: RNCC: 3 | RNVC: 2
NAVY1245B1PC30: RNCC: 3 | RNVC: 2
NAVY1245BPC30: RNCC: 3 | RNVC: 2
NAVY1245PC30: RNCC: 3 | RNVC: 2
NAVY1250BPC11: RNCC: 3 | RNVC: 2
NAVY1250CPC11: RNCC: 3 | RNVC: 2
NAVY1250PC11: RNCC: 3 | RNVC: 2
NAVY1289PC30: RNCC: 3 | RNVC: 2
NAVY2332PC73: RNCC: 3 | RNVC: 2
NAVY2347PC16: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-318-6223
Shaft Collar

003186223
CL55S47-6ALT1PC27: RNCC: 3 | RNVC: 2
CL55S47-9ALT2PC27: RNCC: 3 | RNVC: 2
BB61S47-085PC27: RNCC: 3 | RNVC: 2
G96PC27: RNCC: 3 | RNVC: 2
BB61S47-087PC27: RNCC: 3 | RNVC: 2
G86PC27: RNCC: 3 | RNVC: 2
G86PC27: RNCC: 5 | RNVC: 2
C86PC27: RNCC: 5 | RNVC: 9
31: RNCC: 5 | RNVC: 9
1-7528: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-218-6183
Controla Shaft Assy

002186183
521131: RNCC: 3 | RNVC: 2
SN575013PC70T075-107: RNCC: 5 | RNVC: 9
SN575029PC29T030-42: RNCC: 5 | RNVC: 9
X1075A1PC72-73-83: RNCC: 5 | RNVC: 9
X1018A1PC70T075-107: RNCC: 5 | RNVC: 9
X1036A1PC51T056-162T0164: RNCC: 5 | RNVC: 9
Y1025A2PC25T030-42: RNCC: 5 | RNVC: 9
X1076A1PC72T074-83: RNCC: 5 | RNVC: 9
Y1025A1PC25T030-42: RNCC: 5 | RNVC: 9
Y1025A3PC25T030-42: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-420-2006
Positioning Shoe

004202006
SG1251PC16: RNCC: 3 | RNVC: 2
SG1264PC16: RNCC: 3 | RNVC: 2
SG1039PC16: RNCC: 3 | RNVC: 2
SG1266PC16: RNCC: 3 | RNVC: 2
SG1282PC16: RNCC: 3 | RNVC: 2
SG1545PC16: RNCC: 3 | RNVC: 2
SG1041PC16: RNCC: 3 | RNVC: 2
SG1165PC16: RNCC: 3 | RNVC: 2
SG1248PC16: RNCC: 3 | RNVC: 2
SG1366PC16: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-179-9605
Shouldered Shaft

001799605
ADG8646A: RNCC: 3 | RNVC: 2
ADG8646A: RNCC: 3 | RNVC: 9
MADG8660APC10: RNCC: 5 | RNVC: 9
10ADE8660BPC10: RNCC: 5 | RNVC: 9
13ADD8660BPC10: RNCC: 5 | RNVC: 9
10ADE8660APC10: RNCC: 5 | RNVC: 9
13ADD8660APC10: RNCC: 5 | RNVC: 9
15ADD8660APC10: RNCC: 5 | RNVC: 9
7ADD8660APC10: RNCC: 5 | RNVC: 9
ADE8646A: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-218-3710
Shouldered Shaft

002183710
4258P: RNCC: 3 | RNVC: 2
4258P: RNCC: 3 | RNVC: 9
171624D: RNCC: 5 | RNVC: 2
SL4276PC33: RNCC: 5 | RNVC: 2
SL4279PC33: RNCC: 5 | RNVC: 2
SL4637PC33: RNCC: 5 | RNVC: 2
AD14-S47-57PC33: RNCC: 5 | RNVC: 2
SL4276PC33: RNCC: 5 | RNVC: 9
SL4637PC33: RNCC: 5 | RNVC: 9
SL4279PC33: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-181-2931
Bell Crank

001812931
206-061-742-3: RNCC: 3 | RNVC: 2
206-061-742-003: RNCC: 5 | RNVC: 2

25 May 1970

3040-01-698-4166
Brake Shoe Set

016984166
4725398: RNCC: 3 | RNVC: 2

16 Nov 2021

3040-00-126-3362
Shouldered Shaft

001263362
X-242351: RNCC: 3 | RNVC: 2
X-242351: RNCC: 3 | RNVC: 9
X300B144X37: RNCC: 5 | RNVC: 2
300B144X37-430N: RNCC: 5 | RNVC: 9
Y300B144X31: RNCC: 5 | RNVC: 9
300B144X31-113N: RNCC: 5 | RNVC: 9
217470PC68: RNCC: 5 | RNVC: 9
215557PC68: RNCC: 5 | RNVC: 9
215176PC68: RNCC: 5 | RNVC: 9
215183PC68: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-700-8092
Flexible Shaft Assembly Casing

017008092
209-001-196-101: RNCC: 3 | RNVC: 2

14 Apr 2022

3040-01-699-3318
Straight Shaft

016993318
373583-1: RNCC: 3 | RNVC: 2

24 Jan 2022

3040-01-699-0306
Shouldered Shaft

016990306
00-693448: RNCC: 3 | RNVC: 2

4 Jan 2022

3040-01-675-3246
Rigid Connecting Link

016753246
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-1101: RNCC: 3 | RNVC: 2

5 Sep 2018

3040-00-150-7320
Mechanical Drive Housing

001507320
8754337: RNCC: 3 | RNVC: 2
2920001507320: RNCC: 5 | RNVC: 9
29201507320: RNCC: 5 | RNVC: 9

30 Jul 1970

3040-00-146-4491
Shoe

001464491
107772PC170: RNCC: 3 | RNVC: 2
114972PC170: RNCC: 3 | RNVC: 2
114960PC170: RNCC: 3 | RNVC: 2
107672PC170: RNCC: 3 | RNVC: 2
107760PC170: RNCC: 3 | RNVC: 2
107660PC170: RNCC: 3 | RNVC: 2
11B: RNCC: 3 | RNVC: 2
107772PC170: RNCC: 5 | RNVC: 9
114960PC170: RNCC: 5 | RNVC: 9
11B: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-146-1111
Pump Shaft

001461111
1111800: RNCC: 3 | RNVC: 2
39J763PC103: RNCC: 5 | RNVC: 2
40J442PC480T0483: RNCC: 5 | RNVC: 2
25J123PC557T0560: RNCC: 5 | RNVC: 2
25J98PC432T0435: RNCC: 5 | RNVC: 2
40J414PC104T0107: RNCC: 5 | RNVC: 2
39J762PC607-610-611-616: RNCC: 5 | RNVC: 2
25J114PC132: RNCC: 5 | RNVC: 9
40J414PC104T0107: RNCC: 5 | RNVC: 9
40J442PC480T0483: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-147-0468
Shouldered Shaft

001470468
ADD8499A: RNCC: 3 | RNVC: 2
ADD8499A: RNCC: 3 | RNVC: 9
13ADD8491BPC5: RNCC: 5 | RNVC: 9
7ADD8491APC5: RNCC: 5 | RNVC: 9
MAADG8491APC5: RNCC: 5 | RNVC: 9
MADG8491APC5: RNCC: 5 | RNVC: 9
MADG8491CPC5: RNCC: 5 | RNVC: 9
13ADD8491APC5: RNCC: 5 | RNVC: 9
15ADD8491BPC5: RNCC: 5 | RNVC: 9
15ADD8491CPC5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-700-4778
Counterbalance Weight

017004778
5127T65P02: RNCC: 3 | RNVC: 2

29 Mar 2022

3040-01-699-3040
Bell Crank Support

016993040
990209-1: RNCC: 3 | RNVC: 2

22 Jan 2022

3040-01-698-4956
Spur Gearshaft

016984956
5165T73P01: RNCC: 3 | RNVC: 2
5165T73P01: RNCC: 5 | RNVC: 2

19 Nov 2021

3040-01-699-2763
Straight Shaft

016992763
50426-1: RNCC: 3 | RNVC: 2

21 Jan 2022

3040-00-213-0334
Shouldered Shaft

002130334
A909PC29: RNCC: 3 | RNVC: 2
A882PC27: RNCC: 3 | RNVC: 2
A924PC57: RNCC: 3 | RNVC: 2
A982PC27: RNCC: 3 | RNVC: 2
A1063PC57: RNCC: 3 | RNVC: 2
A890PC29: RNCC: 3 | RNVC: 2
A891PC29: RNCC: 3 | RNVC: 2
A917PC57: RNCC: 3 | RNVC: 2
A908PC29: RNCC: 3 | RNVC: 2
A925PC57: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-703-0196
Planetary Gears Carrier

017030196
29535986: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-01-702-6536
Rigid Connecting Link

017026536
212A1125-35: RNCC: 3 | RNVC: 2

19 Jul 2022

3040-00-216-9281
Thrust Bearing Shoe

002169281
47-16-2175-2: RNCC: 3 | RNVC: 2
1111506: RNCC: 3 | RNVC: 2
462175BPC2T04: RNCC: 5 | RNVC: 2
462175CPC2T04: RNCC: 5 | RNVC: 2
462175EPC2T04: RNCC: 5 | RNVC: 2
462175FPC2T04: RNCC: 5 | RNVC: 2
462585CPC2T04: RNCC: 5 | RNVC: 2
462585DPC2T04: RNCC: 5 | RNVC: 2
462585EPC2T04: RNCC: 5 | RNVC: 2
462585FPC2T04: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-703-4300
Hydraulic Accumulator

017034300
AKB25B-12P-NT: RNCC: 3 | RNVC: 2

7 Sep 2022

3040-00-126-8862
Shouldered Shaft

001268862
55-22404-15: RNCC: 3 | RNVC: 2
9354: RNCC: 3 | RNVC: 2
CA6781-14-1: RNCC: 5 | RNVC: 2
CA6660PC14-9354: RNCC: 5 | RNVC: 9
CA6782-14-1: RNCC: 5 | RNVC: 9
CA6782PC14-1: RNCC: 5 | RNVC: 9
CA6854PC14-1: RNCC: 5 | RNVC: 9
CA6856PC14-1: RNCC: 5 | RNVC: 9
9354-46M7: RNCC: 5 | RNVC: 9
9354P14-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-125-7848
Drive Shaft

001257848
FS26N: RNCC: 3 | RNVC: 2
FS0-26-2PC56: RNCC: 5 | RNVC: 9
FS0-262BPC56: RNCC: 5 | RNVC: 9
FSE26APC32: RNCC: 5 | RNVC: 9
FSE26PC32: RNCC: 5 | RNVC: 9
FSL26-3APC39: RNCC: 5 | RNVC: 9
FSL26-3PC39: RNCC: 5 | RNVC: 9
FSC26BPC28: RNCC: 5 | RNVC: 9
FSC26PC28: RNCC: 5 | RNVC: 9
FSN26PC5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-1646
Shouldered Shaft

016991646
00-972588: RNCC: 3 | RNVC: 2

13 Jan 2022

3040-00-177-3168
Straight Shaft

001773168
4953-4500-10: RNCC: 3 | RNVC: 2
4500-10F581PC16: RNCC: 5 | RNVC: 2
4500-10F692PC17: RNCC: 5 | RNVC: 2
4500-10F693PC17: RNCC: 5 | RNVC: 2
4080-4500-10V2036: RNCC: 5 | RNVC: 9
4080-4500-10V2036: RNCC: 5 | RNVC: 9
4500-10F581PC16: RNCC: 5 | RNVC: 9
4500-10F692PC17: RNCC: 5 | RNVC: 9
4953-4500-10: RNCC: 5 | RNVC: 9
4500-10F693PC17: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-175-8894
Ball Joint

001758894
3713131-55: RNCC: 3 | RNVC: 9
WW6666560SH5PC58-60: RNCC: 5 | RNVC: 2
WW6666560SH1PC58-60: RNCC: 5 | RNVC: 2
WW8454512PC2: RNCC: 5 | RNVC: 2
WW8454513PC2: RNCC: 5 | RNVC: 2
WW6683539PC45: RNCC: 5 | RNVC: 2
WW8454437PC45: RNCC: 5 | RNVC: 2
WW8497158PC45: RNCC: 5 | RNVC: 2
3713131-55: RNCC: 5 | RNVC: 2
WW6666560SH1PC58-60: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-152-2431
Mechanically Actuated Spindle

001522431
3N9PC20: RNCC: 3 | RNVC: 9
3N103PC20: RNCC: 5 | RNVC: 9
3N101PC20: RNCC: 5 | RNVC: 9
NN16-8PC20: RNCC: 5 | RNVC: 9
3N37PC20: RNCC: 5 | RNVC: 9
NN11-17PC20: RNCC: 5 | RNVC: 9
AC2308-1: RNCC: 5 | RNVC: 9
NN16-3PC20: RNCC: 5 | RNVC: 9
1749: RNCC: 5 | RNVC: 9
20-11: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-698-5983
Shouldered Shaft

016985983
8656C0200K091A: RNCC: 3 | RNVC: 1

29 Nov 2021

3040-01-673-9906
Control Cam

016739906
AB3Z5K751A: RNCC: 3 | RNVC: 2
7423203657: RNCC: 5 | RNVC: 2
AB315K751AA: RNCC: 5 | RNVC: 9

9 Jul 2018

3040-00-218-3374
Shouldered Shaft

002183374
2377P: RNCC: 3 | RNVC: 2
2377P: RNCC: 3 | RNVC: 9
254881-2: RNCC: 5 | RNVC: 9
SL4881PC32: RNCC: 5 | RNVC: 9
SL6411PC32: RNCC: 5 | RNVC: 9
SL6451PC32: RNCC: 5 | RNVC: 9
SL7650PC32: RNCC: 5 | RNVC: 9
SL8132PC4: RNCC: 5 | RNVC: 9
SL4879PC32: RNCC: 5 | RNVC: 9
SL6413PC32: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-0548
Shaft Shouldered

016990548
990199-1: RNCC: 3 | RNVC: 2

5 Jan 2022

3040-01-697-7776
Manual Control Lever

016977776
13-13-598-002: RNCC: 3 | RNVC: 2

8 Oct 2021

3040-00-204-3268
Friction Lining

002043268
214-7039: RNCC: 3 | RNVC: 2
454400ITEM5: RNCC: 5 | RNVC: 2
97804S6307-506591ALT1PC4: RNCC: 5 | RNVC: 2
4188ALT1ITEM5: RNCC: 5 | RNVC: 2
503-5-2M1ALT1ITEM4: RNCC: 5 | RNVC: 2
78818W1PC15: RNCC: 5 | RNVC: 2
94977W1PC4: RNCC: 5 | RNVC: 2
A50-73: RNCC: 5 | RNVC: 2
90929W1PC4: RNCC: 5 | RNVC: 2
PUB6393-21ITEM15: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-697-9180
Pneumatic Accumulator

016979180
4053709: RNCC: 3 | RNVC: 2
4222122: RNCC: 5 | RNVC: 2
4222122: RNCC: 5 | RNVC: 9
4222122: RNCC: 7 | RNVC: 2

19 Oct 2021

3040-01-699-1139
Housing Adapter

016991139
2004181-1: RNCC: 3 | RNVC: 2

8 Jan 2022

3040-01-699-0500
Cam Control

016990500
2005232-1: RNCC: 3 | RNVC: 2

5 Jan 2022

3040-01-698-2122
Straight Shaft Assembly

016982122
111153009: RNCC: 3 | RNVC: 2

3 Nov 2021

3040-01-698-4767
Shaft Collar

016984767
143031978E: RNCC: 3 | RNVC: 2

18 Nov 2021

3040-01-174-6004
Remote Control Lever

011746004
LA64012PIECE8.9: RNCC: 3 | RNVC: 2
LA64012PIECE8.9: RNCC: 3 | RNVC: 9
LA64012 SHEET 22: RNCC: 5 | RNVC: 2
LB-64089: RNCC: 5 | RNVC: 2
LA64012 SHEET 22: RNCC: 5 | RNVC: 9
LA64012PIECE8.9: RNCC: 5 | RNVC: 9
LA64012 SHEET 22: RNCC: 5 | RNVC: 9
LA64012PIECE8.9: RNCC: 5 | RNVC: 9
LB-64089: RNCC: 5 | RNVC: 9
SPI-LB64089: RNCC: 5 | RNVC: 9

21 Mar 1984

3040-01-552-3748
Rigid Connecting Link

015523748
1821430: RNCC: 3 | RNVC: 2
1821430: RNCC: 5 | RNVC: 2
10466172: RNCC: 6 | RNVC: 9

12 Jun 2007

3040-01-698-2207
Linear Actuating Cylinder

016982207
E-7417: RNCC: 3 | RNVC: 2

3 Nov 2021

3040-01-700-9557
Rigid Connecting Link

017009557
251A1673-3: RNCC: 3 | RNVC: 2

21 Apr 2022

3040-01-698-9769
Shouldered Shaft

016989769
00-848722: RNCC: 3 | RNVC: 2

28 Dec 2021

3040-01-699-1136
Pawl

016991136
990322-1: RNCC: 3 | RNVC: 2

8 Jan 2022

3040-00-528-8736
Flexible Shaft Assembly Core

005288736
1581430: RNCC: 3 | RNVC: 9
581430: RNCC: 5 | RNVC: 2
100730R91: RNCC: 5 | RNVC: 2
111576R91: RNCC: 5 | RNVC: 2
7355825: RNCC: 5 | RNVC: 2
7413487: RNCC: 5 | RNVC: 2
G418049-87-1-2: RNCC: 5 | RNVC: 9
100730R91: RNCC: 5 | RNVC: 9
111576R91: RNCC: 5 | RNVC: 9
KC8721: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-787-7250
Straight Shaft

007877250
SS117: RNCC: 3 | RNVC: 2
A3-12: RNCC: 3 | RNVC: 2
9188646: RNCC: 3 | RNVC: 2
13029362: RNCC: 3 | RNVC: 2
G4-10: RNCC: 5 | RNVC: 2
966290-403: RNCC: 5 | RNVC: 2
G4-10: RNCC: 5 | RNVC: 2
S3-12: RNCC: 5 | RNVC: 9
412581-3: RNCC: 7 | RNVC: 2
Z8-40: RNCC: C | RNVC: 1

1 Jan 1960

3040-00-513-5786
Linear Actuating Cylinder Assembly

005135786
M2022790: RNCC: 3 | RNVC: 2
8327979: RNCC: 3 | RNVC: 2
AID968: RNCC: 5 | RNVC: 2
2297549: RNCC: 5 | RNVC: 2
648E17: RNCC: 5 | RNVC: 9
KC9668: RNCC: 5 | RNVC: 9
A4020: RNCC: 5 | RNVC: 9
2297549: RNCC: 5 | RNVC: 9
3040005135786: RNCC: 5 | RNVC: 9
2297549: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-036-3080
Thrust Bearing Shoe

000363080
27-1866-2: RNCC: 3 | RNVC: 2
461868FPC2T04: RNCC: 3 | RNVC: 2
27-1866-2: RNCC: 3 | RNVC: 2
461866FPC2T04: RNCC: 3 | RNVC: 2
461866KPC2T04: RNCC: 5 | RNVC: 9
461866EPC2T04: RNCC: 5 | RNVC: 9
461866GPC2T04: RNCC: 5 | RNVC: 9
461866HPC2T04: RNCC: 5 | RNVC: 9
461866FPC2T04: RNCC: 5 | RNVC: 9
461868FPC2T04: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-499-2476
Shaft Retaining Plate

004992476
S4105-441657PC8715: RNCC: 3 | RNVC: 2
8715: RNCC: 3 | RNVC: 2
87911S4105-441767PC59: RNCC: 3 | RNVC: 2
87911S4105-441782PC8715: RNCC: 3 | RNVC: 2
N1072PC8715: RNCC: 5 | RNVC: 2
N32400PC8715: RNCC: 5 | RNVC: 2
N32250PC59: RNCC: 5 | RNVC: 2
X8715: RNCC: 5 | RNVC: 9
18438PC8715: RNCC: 5 | RNVC: 9
14247PC8715: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-648-6929
Control Cable Assembly

016486929
CCX43326: RNCC: 3 | RNVC: 2
308726: RNCC: 5 | RNVC: 2
45101-26: RNCC: 5 | RNVC: 2
45101-0792: RNCC: 5 | RNVC: 2
308726: RNCC: 5 | RNVC: 9

2 Oct 2015

3040-01-472-4006
Rigid Connecting Link

014724006
NAS356: RNCC: 3 | RNVC: 1
NAS356-61-846: RNCC: 3 | RNVC: 2

1 Mar 2000

3040-01-703-0909
Planetary Gears Carrier

017030909
29545366: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-01-703-0921
Linear Actuating Cylinder Piston

017030921
29544956: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-00-152-2430
Mechanically Actuated Spindle

001522430
AC2307-1: RNCC: 3 | RNVC: 9
3N21-2PC20: RNCC: 5 | RNVC: 9
3N23-5PC20: RNCC: 5 | RNVC: 9
3N6PC20: RNCC: 5 | RNVC: 9
3N6PC21: RNCC: 5 | RNVC: 9
3N73PC20: RNCC: 5 | RNVC: 9
3N74PC20: RNCC: 5 | RNVC: 9
3N91PC20: RNCC: 5 | RNVC: 9
3N51PC20: RNCC: 5 | RNVC: 9
3N67PC20: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-673-6834
Rigid Connecting Link

016736834
146T7245Y112: RNCC: 3 | RNVC: 1
146T7245-112: RNCC: C | RNVC: 1

21 Jun 2018

3040-00-119-3239
Air Compressor Shoe

001193239
1569B: RNCC: 3 | RNVC: 2
1569B: RNCC: 3 | RNVC: 9
107427PC182: RNCC: 5 | RNVC: 9
110928PC182: RNCC: 5 | RNVC: 9
111128PC182: RNCC: 5 | RNVC: 9
118227PC182: RNCC: 5 | RNVC: 9
116312PC182: RNCC: 5 | RNVC: 9
11692PC182: RNCC: 5 | RNVC: 9
116927PC182: RNCC: 5 | RNVC: 9
118228PC182: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-01-670-3843
Shouldered Axle

016703843
7550477-G5254201-060: RNCC: 3 | RNVC: 1
G5254201-060: RNCC: 5 | RNVC: 1
G547-0001-G5254201-060: RNCC: 5 | RNVC: 1
7384908 PN 60D4: RNCC: 5 | RNVC: 1
12159M501E: RNCC: 5 | RNVC: 1
G525-4201 PN 60: RNCC: 5 | RNVC: 1
12-36-3010: RNCC: 5 | RNVC: 1
7384908 PN 60D4: RNCC: 5 | RNVC: 2
G5254201-060D4: RNCC: 5 | RNVC: 2
12-36-3010D4: RNCC: 5 | RNVC: 2

21 Feb 2018

3040-01-670-0726
Control Cam

016700726
7550479-264375101-27: RNCC: 3 | RNVC: 1
845-7285216 ITEM 27: RNCC: 5 | RNVC: 1
2643-820-12 ITEM 24: RNCC: 5 | RNVC: 1
264375101-27: RNCC: 5 | RNVC: 1
2643-751-01 ITEM 27: RNCC: 5 | RNVC: 1
G547-0003-264375101-27: RNCC: 5 | RNVC: 1
2643-820-12 ITEM 24D4: RNCC: 5 | RNVC: 2
7550479-264375101-27D4: RNCC: 5 | RNVC: 2
G547-0003-264375101-27D4: RNCC: 5 | RNVC: 2
264375101-27D4: RNCC: 5 | RNVC: 2

5 Feb 2018

3040-00-640-4880
Shaft Collar

006404880
SC31: RNCC: 3 | RNVC: 2
67700: RNCC: 3 | RNVC: 2
504-003: RNCC: E | RNVC: 8

1 Jan 1963

3040-00-364-4261
Shaft Collar

003644261
N21141PC7: RNCC: 3 | RNVC: 2
N21141PC7: RNCC: 5 | RNVC: 9
N12808PC34: RNCC: 5 | RNVC: 9
N21141PC7: RNCC: 5 | RNVC: 9
N29941PC7: RNCC: 5 | RNVC: 9
N30741PC7: RNCC: 5 | RNVC: 9
N8808PC34: RNCC: 5 | RNVC: 9
N38841PC7: RNCC: 5 | RNVC: 9
N4835PC34: RNCC: 5 | RNVC: 9
N5808PC34: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-071-5505
Thrust Bearing Shoe

000715505
26J819PC1T03: RNCC: 3 | RNVC: 2
37-2590-1: RNCC: 3 | RNVC: 2
462590CPC1T03: RNCC: 3 | RNVC: 2
26J291PC160T0162: RNCC: 3 | RNVC: 2
26J820PC1T03: RNCC: 3 | RNVC: 2
462591CPC1T03: RNCC: 3 | RNVC: 2
37-4716-2: RNCC: 3 | RNVC: 2
462590CPC1T03: RNCC: 3 | RNVC: 2
26J820PC1T03: RNCC: 5 | RNVC: 2
464717PC2T04: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-615-6760
Shouldered Shaft

006156760
2843E57: RNCC: 3 | RNVC: 2
2843E57: RNCC: 5 | RNVC: 2
6156760: RNCC: 5 | RNVC: 2
2843E57: RNCC: 5 | RNVC: 2
187310R1: RNCC: 5 | RNVC: 2
364931: RNCC: 5 | RNVC: 2
2150054: RNCC: 5 | RNVC: 2
367SP36: RNCC: 5 | RNVC: 9
2843E57: RNCC: 5 | RNVC: 9
2150054: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-398-5780
Shouldered Shaft

003985780
728-7260-623: RNCC: 3 | RNVC: 9
220-5-6ASS: RNCC: 5 | RNVC: 9
50387-191: RNCC: 5 | RNVC: 9
50387PC191: RNCC: 5 | RNVC: 9
728-0234-104: RNCC: 5 | RNVC: 9
50376-1-191: RNCC: 5 | RNVC: 9
50376-1PC191: RNCC: 5 | RNVC: 9
50376PC191: RNCC: 5 | RNVC: 9
50387-191: RNCC: 5 | RNVC: 9
50387PC191: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-398-8930
Rigid Connecting Link

003988930
297882-01: RNCC: 3 | RNVC: 2
297882-01: RNCC: 3 | RNVC: 9
SL8675PC22: RNCC: 5 | RNVC: 2
5587P: RNCC: 5 | RNVC: 2
10700: RNCC: 5 | RNVC: 2
SL9032PC29: RNCC: 5 | RNVC: 2
SL8907PC29: RNCC: 5 | RNVC: 2
DR82989PC343-343A: RNCC: 5 | RNVC: 9
SL5720PC343: RNCC: 5 | RNVC: 9
SL5738PC343: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-698-2474
Differential Gear Unit

016982474
4242-0001-1: RNCC: 3 | RNVC: 2

4 Nov 2021

3040-01-697-7513
Spur Gearshaft

016977513
5036T84P04: RNCC: 3 | RNVC: 2

7 Oct 2021

3040-01-699-0137
Shouldered Shaft

016990137
00-293963: RNCC: 3 | RNVC: 2

31 Dec 2021

3040-01-699-1137
Housing Adapter

016991137
2004180-1: RNCC: 3 | RNVC: 2

8 Jan 2022

3040-01-699-2660
Bell Crank Support

016992660
980110-1: RNCC: 3 | RNVC: 2

20 Jan 2022

3040-01-700-8079
Flexible Shaft Assembly Core

017008079
209-001-195-101: RNCC: 3 | RNVC: 2

14 Apr 2022

3040-01-698-8772
Shouldered Shaft

016988772
00-248821: RNCC: 3 | RNVC: 2

16 Dec 2021

3040-01-698-4987
Bevel Gearshaft

016984987
6034T39G04: RNCC: 3 | RNVC: 2
6034T39G04: RNCC: 5 | RNVC: 2

19 Nov 2021

3040-01-699-0919
Shouldered Axle

016990919
00-855520: RNCC: 3 | RNVC: 2

6 Jan 2022

3040-01-577-4115
Mechanical Drive Housing

015774115
1341428: RNCC: 3 | RNVC: 2
1341428: RNCC: 5 | RNVC: 2
1341428: RNCC: 5 | RNVC: 2
10466175: RNCC: 6 | RNVC: 9

3 Sep 2009

3040-01-658-7378
Ball Joint

016587378
BC3Z-3050-A: RNCC: 3 | RNVC: 9
BC3Z3050D: RNCC: 5 | RNVC: 2

14 Oct 2016

3040-00-423-0801
Spur Gearshaft

004230801
TG07: RNCC: 3 | RNVC: 2
8B8119: RNCC: 3 | RNVC: 2
193-13: RNCC: 3 | RNVC: 2
7994328: RNCC: 3 | RNVC: 2
666947: RNCC: 3 | RNVC: 9
7EQ7113A: RNCC: 5 | RNVC: 9
3446: RNCC: 5 | RNVC: 9
DU3441: RNCC: 5 | RNVC: 9
7EQ7113: RNCC: 5 | RNVC: 9
2073114: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-666-8245
Worm Shaft

016668245
P00356-1: RNCC: 3 | RNVC: 2
P000356-1: RNCC: 5 | RNVC: 2

21 Sep 2017

3040-01-703-0166
Mechanical Drive Housing

017030166
29544592: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-01-507-1608
Linear Actuating Cylinder Assembly

015071608
180-4239: RNCC: 3 | RNVC: 2
206-0514: RNCC: 5 | RNVC: 2

21 Apr 2003

3040-00-546-5146
Rigid Connecting Link

005465146
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-1240: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-398-9892
Friction Lining

003989892
2262527: RNCC: 3 | RNVC: 2
WW2265910PC41: RNCC: 5 | RNVC: 2
WW2265918PC33: RNCC: 5 | RNVC: 2
WW2265942PC26: RNCC: 5 | RNVC: 2
2262527REFAM24: RNCC: 5 | RNVC: 2
226252REFAM24: RNCC: 5 | RNVC: 2
WW2265970PC33: RNCC: 5 | RNVC: 2
WW2265975PC33: RNCC: 5 | RNVC: 2
WW2265941PC26: RNCC: 5 | RNVC: 2
WW2265965PC33: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-698-5281
Spur Gearshaft

016985281
5034T78P04: RNCC: 3 | RNVC: 2
5034T78P04: RNCC: 5 | RNVC: 2

22 Nov 2021

3040-01-699-1673
Rigid Connecting Link

016991673
2005228-1: RNCC: 3 | RNVC: 2

13 Jan 2022

3040-01-697-6578

4 Oct 2021

3040-00-118-8691
Mechanical Drive Housing

001188691
XG8380676: RNCC: 3 | RNVC: 9
8754260: RNCC: 5 | RNVC: 2
XG8380676: RNCC: 5 | RNVC: 9
2520001188691: RNCC: 6 | RNVC: 9

14 Oct 1968

3040-00-396-2513
Linear Actuating Cylinder Piston Rod

003962513
36795: RNCC: 3 | RNVC: 2
316308PC37: RNCC: 5 | RNVC: 2
316313PC37: RNCC: 5 | RNVC: 2
402213PC37: RNCC: 5 | RNVC: 2
402219PC37: RNCC: 5 | RNVC: 2
428377PC81: RNCC: 5 | RNVC: 2
428384PC81: RNCC: 5 | RNVC: 2
432410P37: RNCC: 5 | RNVC: 2
445100PC82: RNCC: 5 | RNVC: 2
457282PC82: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-145-2448
Spur Gearshaft

001452448
10C1163: RNCC: 3 | RNVC: 2
10C1163PC1: RNCC: 3 | RNVC: 2
2384PC10C1163: RNCC: 3 | RNVC: 2
10C1153: RNCC: 3 | RNVC: 2
685PCWH2E10C1163: RNCC: 3 | RNVC: 2
W209C: RNCC: 3 | RNVC: 2
WH2E10C1163: RNCC: 3 | RNVC: 2
11092: RNCC: 3 | RNVC: 2
11092PC1: RNCC: 3 | RNVC: 2
51185PCW209C: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-698-6776
Shouldered Shaft

016986776
148-7988: RNCC: 3 | RNVC: 2

2 Dec 2021

3040-01-699-0512
Plate Detergent

016990512
2004190-1: RNCC: 3 | RNVC: 2

5 Jan 2022

3040-01-699-0308
Shouldered Shaft

016990308
00-848559: RNCC: 3 | RNVC: 2

4 Jan 2022

3040-01-698-8777
Shouldered Shaft

016988777
00-317088: RNCC: 3 | RNVC: 2

16 Dec 2021

3040-00-266-8276
Rigid Connecting Link

002668276
NAS356: RNCC: 3 | RNVC: 1
NAS356-84-1209: RNCC: 3 | RNVC: 2

8 Jul 1973

3040-00-473-3538
Sheathing

004733538
MF34442ITEM22: RNCC: 3 | RNVC: 2
MF34442PC34638: RNCC: 3 | RNVC: 2
MF34443ITEM11: RNCC: 3 | RNVC: 2
MF36433ITEM22: RNCC: 3 | RNVC: 2
3286933REVAPC7: RNCC: 5 | RNVC: 2
3286933REVAPC7: RNCC: 5 | RNVC: 9
MF38844ITEM19: RNCC: 5 | RNVC: 9
MF38844PC34638: RNCC: 5 | RNVC: 9
MF36433PC34638: RNCC: 5 | RNVC: 9
MF36434ITEM11: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-9687
Pivot Shaft Assembly

016999687
90.1341.00: RNCC: 3 | RNVC: 2

9 Mar 2022

3040-01-700-0214
Linear Actuating Cylinder Piston

017000214
C-7616: RNCC: 3 | RNVC: 2

11 Mar 2022

3040-01-698-4941
Spur Gearshaft

016984941
5165T65P01: RNCC: 3 | RNVC: 2
5165T65P01: RNCC: 5 | RNVC: 2

19 Nov 2021

3040-01-641-0975
Bearing Inner Fixed Cap

016410975
G45605: RNCC: 3 | RNVC: 2
10004774-001: RNCC: 3 | RNVC: 2

8 Jan 2015

3040-01-702-8756
Nonaircraft Mechanical Actuator

017028756
3592773: RNCC: 3 | RNVC: 2

3 Aug 2022

3040-01-699-0546
Housing-Mechanical

016990546
980138-1: RNCC: 3 | RNVC: 2

5 Jan 2022

3040-01-702-8415
Shaft Collar

017028415
0-101-079-02: RNCC: 3 | RNVC: 2

1 Aug 2022

3040-01-504-7561
Bevel Gearshaft

015047561
SH8821A: RNCC: 3 | RNVC: 2
3040015047561: RNCC: 5 | RNVC: 9

7 Feb 2003

3040-01-668-9048
Rigid Connecting Link

016689048
NAS356: RNCC: 3 | RNVC: 1
NAS356-84-1101: RNCC: 3 | RNVC: 2

12 Dec 2017

3040-00-365-2018
Friction Lining

003652018
5878R: RNCC: 3 | RNVC: 2
6410013: RNCC: 5 | RNVC: 2
5878S: RNCC: 5 | RNVC: 2
45550-022-05: RNCC: 5 | RNVC: 2
C99L13: RNCC: 5 | RNVC: 2
26540009: RNCC: 5 | RNVC: 2
TD5878S: RNCC: 5 | RNVC: 2
5878S: RNCC: 5 | RNVC: 9
C99L13: RNCC: 5 | RNVC: 9
5878S: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-698-4167
Brake Shoe Set

016984167
4725399: RNCC: 3 | RNVC: 2

16 Nov 2021

3040-00-925-9795
Rigid Connecting Link

009259795
NAS356: RNCC: 3 | RNVC: 1
NAS356-81-1450: RNCC: 3 | RNVC: 2

26 Jan 1966

3040-00-277-3652
Shaft Collar

002773652
N21136PC7: RNCC: 3 | RNVC: 2
3229939: RNCC: 3 | RNVC: 2
3242099: RNCC: 3 | RNVC: 2
N12809PC20: RNCC: 3 | RNVC: 2
N30039PC6: RNCC: 3 | RNVC: 2
N38439PC5: RNCC: 3 | RNVC: 2
N12809PC20: RNCC: 5 | RNVC: 9
N4836PC20: RNCC: 5 | RNVC: 9
N4875PC59: RNCC: 5 | RNVC: 9
N4879PC67: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-270-8333
Ball Joint

002708333
SF-96#7: RNCC: 3 | RNVC: 2
5365090A: RNCC: 3 | RNVC: 2
JS32PC2: RNCC: 5 | RNVC: 9
32N793PC41: RNCC: 5 | RNVC: 9
32N804PC41: RNCC: 5 | RNVC: 9
36N407BPC13: RNCC: 5 | RNVC: 9
36N506BPC13: RNCC: 5 | RNVC: 9
DS2386: RNCC: 5 | RNVC: 9
DS2387: RNCC: 5 | RNVC: 9
PL138W10CDS3466: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-700-6510
Nonaircraft Mechanical Actuator

017006510
TYCO5519982: RNCC: 3 | RNVC: 2
AD-214972-W01-A: RNCC: D | RNVC: 9

5 Apr 2022

3040-01-700-9583
Rigid Connecting Link

017009583
251A1814-14: RNCC: 3 | RNVC: 2

21 Apr 2022

3040-01-699-5932
Manual Control Lever Assembly

016995932
57204G03: RNCC: 3 | RNVC: 2
57204G03: RNCC: 5 | RNVC: 2

10 Feb 2022

3040-00-172-8548
Shouldered Shaft

001728548
ADD8660A: RNCC: 3 | RNVC: 2
ADD8660A: RNCC: 3 | RNVC: 9
10ADE8660CPC17: RNCC: 5 | RNVC: 9
13ADD8660CPC17: RNCC: 5 | RNVC: 9
MADG8660CPC17: RNCC: 5 | RNVC: 9
15ADD8660CPC17: RNCC: 5 | RNVC: 9
13ADD8660APC17: RNCC: 5 | RNVC: 9
7ADD8660APC17: RNCC: 5 | RNVC: 9
ADE8660A: RNCC: 5 | RNVC: 9
MADG8660APC17: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-3194
Push-Pull Control Assembly

016993194
CCX63309: RNCC: 3 | RNVC: 2
9130002263: RNCC: 3 | RNVC: 2

24 Jan 2022

3040-00-353-2377
Shouldered Shaft

003532377
A3880N326: RNCC: 3 | RNVC: 2
367SPA60: RNCC: 5 | RNVC: 2
11C7124X: RNCC: 5 | RNVC: 2
A3880N326: RNCC: 5 | RNVC: 2
2161952: RNCC: 5 | RNVC: 2
A3880N326: RNCC: 5 | RNVC: 2
19FK0218: RNCC: 5 | RNVC: 2
11C7124: RNCC: 5 | RNVC: 2
A3880N326: RNCC: 5 | RNVC: 9
A3880N326: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-352-5706
Friction Lining

003525706
337232: RNCC: 3 | RNVC: 9
3DC18-96: RNCC: 5 | RNVC: 2
7349613: RNCC: 5 | RNVC: 2
3B045A: RNCC: 5 | RNVC: 9
14LC58: RNCC: 5 | RNVC: 9
C18-96: RNCC: 5 | RNVC: 9
P17912: RNCC: 5 | RNVC: 9
C18-471: RNCC: 5 | RNVC: 9
P17912: RNCC: 5 | RNVC: 9
9043639: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-345-9111
Water Pump Shaft

003459111
5136671: RNCC: 3 | RNVC: 2
7744062: RNCC: 5 | RNVC: 2
5172818: RNCC: 5 | RNVC: 2
N23010PC945233: RNCC: 5 | RNVC: 9
N24315PC1: RNCC: 5 | RNVC: 9
5186493: RNCC: 5 | RNVC: 9
D346-436CPC6-11: RNCC: 5 | RNVC: 9
NT4058PC1: RNCC: 5 | RNVC: 9
NT10805PC1: RNCC: 5 | RNVC: 9
PC5136671: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-671-4380
Shouldered Shaft

016714380
7550479-DF331106-0017: RNCC: 3 | RNVC: 1
DF331106-0017: RNCC: 5 | RNVC: 1
801-6406709 FIND 17: RNCC: 5 | RNVC: 1
211041080: RNCC: 5 | RNVC: 1
G547-0003-DF331106-0017: RNCC: 5 | RNVC: 1
DF331106 FIND 17: RNCC: 5 | RNVC: 1
211041080D4: RNCC: 5 | RNVC: 2
DF331106-0017D4: RNCC: 5 | RNVC: 2
7550479-DF331106-0017D4: RNCC: 5 | RNVC: 2
DF331106 FIND 17D4: RNCC: 5 | RNVC: 2

28 Mar 2018

3040-00-982-7551
Flexible Control Casing

009827551
AN8016-3-64: RNCC: 2 | RNVC: 2
MIL-C-5638: RNCC: 4 | RNVC: 1

1 Jan 1962

3040-01-699-8415
Mechanical Drive Housing

016998415
2-060-250-18: RNCC: 3 | RNVC: 2

1 Mar 2022

3040-01-700-3909
Control Cable Assembly

017003909
GT-2020-10: RNCC: 3 | RNVC: 2

25 Mar 2022

3040-01-700-8096
Flexible Casing End Fitting

017008096
212-001-156-101: RNCC: 3 | RNVC: 2

14 Apr 2022

3040-01-703-5658
Alteration Housing

017035658
29541823: RNCC: 3 | RNVC: 2

8 Sep 2022

3040-01-699-2654
Shouldered Shaft

016992654
53787: RNCC: 3 | RNVC: 2

20 Jan 2022

3040-00-216-7807
Control Cam

002167807
U57G6: RNCC: 3 | RNVC: 2
187940APC292: RNCC: 5 | RNVC: 9
185727PC292: RNCC: 5 | RNVC: 9
186566PC292: RNCC: 5 | RNVC: 9
N215PC326: RNCC: 5 | RNVC: 9
N199PC326: RNCC: 5 | RNVC: 9
N434PC326: RNCC: 5 | RNVC: 9
184244PC292: RNCC: 5 | RNVC: 9
N255PC204: RNCC: 5 | RNVC: 9
N266PC204: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-615-6053
Straight Shaft

006156053
202522: RNCC: 3 | RNVC: 2
2522: RNCC: 3 | RNVC: 2
8A8503: RNCC: 5 | RNVC: 2
72523: RNCC: 5 | RNVC: 9
202522: RNCC: 5 | RNVC: 9
2522: RNCC: 5 | RNVC: 9
07-2522: RNCC: 5 | RNVC: 9
07-202522: RNCC: 5 | RNVC: 9
42004F: RNCC: 5 | RNVC: 9
07-202522: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-570-2780
Cylinder He * Adapter

005702780
3767-152-1SPC6: RNCC: 3 | RNVC: 2
5048D2: RNCC: 3 | RNVC: 2
35755: RNCC: 3 | RNVC: 2
3767-152X1SPC6: RNCC: 5 | RNVC: 2
AN4076-1: RNCC: 5 | RNVC: 2
8T688: RNCC: 5 | RNVC: 2
575-6504-1753957PC6: RNCC: 5 | RNVC: 2
460 664: RNCC: 5 | RNVC: 2
83145: RNCC: 5 | RNVC: 2
R101A: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-420-2019
Positioning Shoe

004202019
S805HA: RNCC: 3 | RNVC: 2
SG1127PC16: RNCC: 3 | RNVC: 2
SG1129PC16: RNCC: 3 | RNVC: 2
SG1374PC16: RNCC: 3 | RNVC: 2
SG1377PC16: RNCC: 3 | RNVC: 2
SG1379PC16: RNCC: 3 | RNVC: 2
SG1382PC16: RNCC: 3 | RNVC: 2
SG1392PC16: RNCC: 3 | RNVC: 2
SG1427PC16: RNCC: 3 | RNVC: 2
SG1430PC16: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-399-4091
Thrust Bearing Shoe

003994091
18-2634-1: RNCC: 3 | RNVC: 2
18-2634-1: RNCC: 5 | RNVC: 2
462634PC1T3: RNCC: 5 | RNVC: 9
18-2634-1: RNCC: 5 | RNVC: 9
D2-8772PC113: RNCC: 5 | RNVC: 9
D2-9713PC85: RNCC: 5 | RNVC: 9
D2-8772PC113: RNCC: 5 | RNVC: 9
D2-8851PC113: RNCC: 5 | RNVC: 9
462634APC1T3: RNCC: 5 | RNVC: 9
D2-8772PC113: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-447-5449
Shouldered Shaft

004475449
5330: RNCC: 3 | RNVC: 2
H2918: RNCC: 5 | RNVC: 2
5330: RNCC: 5 | RNVC: 2
8B7067: RNCC: 5 | RNVC: 2
64879H: RNCC: 5 | RNVC: 2
395408: RNCC: 5 | RNVC: 2
7349340: RNCC: 5 | RNVC: 2
9041838: RNCC: 5 | RNVC: 9
BB22174: RNCC: 5 | RNVC: 9
5330: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-308-9935
Pin Shoe

003089935
3303019: RNCC: 3 | RNVC: 2
3376024: RNCC: 3 | RNVC: 2
3373485: RNCC: 3 | RNVC: 2
7709PC577: RNCC: 5 | RNVC: 2
3373485: RNCC: 5 | RNVC: 2
1364: RNCC: 5 | RNVC: 2
7700PC577: RNCC: 5 | RNVC: 2
3303019: RNCC: 5 | RNVC: 9
3376024: RNCC: 5 | RNVC: 9
3373485: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-385-9474
Spur Gearshaft

003859474
W416N3X1: RNCC: 3 | RNVC: 9
G9683PC119: RNCC: 5 | RNVC: 9
700404PC119: RNCC: 5 | RNVC: 9
800323PC119: RNCC: 5 | RNVC: 9
G7852PC119: RNCC: 5 | RNVC: 9
G7857PC119: RNCC: 5 | RNVC: 9
1503399: RNCC: 5 | RNVC: 9
W416N3X1: RNCC: 5 | RNVC: 9
G7857PC119: RNCC: 5 | RNVC: 9
G9678PC119: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-355-3479
Friction Lining

003553479
CL11289-13: RNCC: 3 | RNVC: 2
64103R2: RNCC: 5 | RNVC: 2
68760HDX: RNCC: 5 | RNVC: 2
55314: RNCC: 5 | RNVC: 2
55738D: RNCC: 5 | RNVC: 9
64103R2: RNCC: 5 | RNVC: 9
68760HDX: RNCC: 5 | RNVC: 9
UCL8679-16CR2: RNCC: 5 | RNVC: 9
CL4178: RNCC: 5 | RNVC: 9
CL8679-43: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-461-8856
Straight Shaft

004618856
204459: RNCC: 3 | RNVC: 2
4459: RNCC: 5 | RNVC: 2
7348054: RNCC: 5 | RNVC: 2
5429F: RNCC: 5 | RNVC: 9
4459: RNCC: 5 | RNVC: 9
4459: RNCC: 5 | RNVC: 9
4459: RNCC: 5 | RNVC: 9
3T5274: RNCC: 5 | RNVC: 9
4459: RNCC: 5 | RNVC: 9
204459: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-640-2270
Flexible Control Casing

006402270
AN8016-3: RNCC: 2 | RNVC: 2
MIL-C-5638: RNCC: 4 | RNVC: 1

1 Jan 1963

3040-00-607-7210
Friction Lining

006077210
ST11764: RNCC: 3 | RNVC: 2
11764: RNCC: 5 | RNVC: 2
11764: RNCC: 5 | RNVC: 2
852967: RNCC: 5 | RNVC: 2
ST11526: RNCC: 5 | RNVC: 2
850999: RNCC: 5 | RNVC: 2
852967: RNCC: 5 | RNVC: 9
850999: RNCC: 5 | RNVC: 9
07-852967: RNCC: 5 | RNVC: 9
007852967: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-036-3427
Turbine Complete Shaft

000363427
29616: RNCC: 3 | RNVC: 2
29616: RNCC: 3 | RNVC: 9
E1811YPC1: RNCC: 5 | RNVC: 2
E2965PC11: RNCC: 5 | RNVC: 2
S60S75262-1860: RNCC: 5 | RNVC: 2
H60TRR41024: RNCC: 5 | RNVC: 2
11260: RNCC: 5 | RNVC: 2
H60TRR41024: RNCC: 5 | RNVC: 9
E2965PC11: RNCC: 5 | RNVC: 9
E1811YPC1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-473-3539
Outside Sheathing

004733539
MF34442ITEM23: RNCC: 3 | RNVC: 2
MF34442PC34639: RNCC: 3 | RNVC: 2
MF34443ITEM12: RNCC: 3 | RNVC: 2
MF34443PC34639: RNCC: 3 | RNVC: 2
MF36433ITEM23: RNCC: 3 | RNVC: 2
3155134ALT1ITEM8: RNCC: 5 | RNVC: 2
3286933REVAPC8: RNCC: 5 | RNVC: 2
3235033PC20: RNCC: 5 | RNVC: 2
6204-3111583ALTBPC8: RNCC: 5 | RNVC: 2
6204-3175083ITEM20: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-700-5281
Straight Shaft

007005281
H216: RNCC: 3 | RNVC: 2
7005281: RNCC: 5 | RNVC: 2
H216: RNCC: 5 | RNVC: 2
H216: RNCC: 5 | RNVC: 2
H216: RNCC: 5 | RNVC: 2
H216: RNCC: 5 | RNVC: 2
H216: RNCC: 5 | RNVC: 9
H216: RNCC: 5 | RNVC: 9
H216: RNCC: 5 | RNVC: 9
TG16: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-359-0402
Control Cam

003590402
813474: RNCC: 3 | RNVC: 9
866047: RNCC: 5 | RNVC: 2
69347: RNCC: 5 | RNVC: 2
72525R1: RNCC: 5 | RNVC: 2
F10602: RNCC: 5 | RNVC: 9
07-866047: RNCC: 5 | RNVC: 9
2253949: RNCC: 5 | RNVC: 9
866047: RNCC: 5 | RNVC: 9
FC10602: RNCC: 5 | RNVC: 9
AB0070866047: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-385-8775
Rigid Connecting Link

003858775
G5440PC24: RNCC: 3 | RNVC: 2
LCVP8981PC24: RNCC: 5 | RNVC: 2
LCVP1298874PC24: RNCC: 5 | RNVC: 2
LCVP420012PC1: RNCC: 5 | RNVC: 2
3016PCL3-49: RNCC: 5 | RNVC: 9
5016PCL3-49: RNCC: 5 | RNVC: 9
5026PCL3-49: RNCC: 5 | RNVC: 9
L3-49: RNCC: 5 | RNVC: 9
5-32-2APC1: RNCC: 5 | RNVC: 9
5-32-2PC1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-374-9419
Shouldered Shaft

003749419
71834R2: RNCC: 3 | RNVC: 2
T98-2A: RNCC: 3 | RNVC: 2
53684: RNCC: 5 | RNVC: 2
614066: RNCC: 5 | RNVC: 2
801543: RNCC: 5 | RNVC: 2
71834R1: RNCC: 5 | RNVC: 9
71834R2: RNCC: 5 | RNVC: 9
842947: RNCC: 5 | RNVC: 9
2600T2: RNCC: 5 | RNVC: 9
22125W: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-110-0665
Ring

011100665
74A450616-2003: RNCC: 3 | RNVC: 2
74A50616-2003: RNCC: 5 | RNVC: 2
74A50616-2003: RNCC: 5 | RNVC: 2
74A450616-2003: RNCC: 5 | RNVC: 2
74A450616-2003: RNCC: 5 | RNVC: 2
74A450616-2003: RNCC: 5 | RNVC: 2
74A50616-2003: RNCC: 5 | RNVC: 2
74A450616-2003: RNCC: 5 | RNVC: 9
74A450616-2003: RNCC: 5 | RNVC: 9
1958-C-270-A: RNCC: 5 | RNVC: 9

25 Mar 1981

3040-00-350-2849
Remote Control Lever

003502849
DC554R: RNCC: 3 | RNVC: 9
10NC0701: RNCC: 5 | RNVC: 2
A214658: RNCC: 5 | RNVC: 2
14Q834: RNCC: 5 | RNVC: 2
80980: RNCC: 5 | RNVC: 9
C554: RNCC: 5 | RNVC: 9
C554: RNCC: 5 | RNVC: 9
C554: RNCC: 5 | RNVC: 9
C1344-1: RNCC: 5 | RNVC: 9
14Q834: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-565-3197
Shouldered Shaft

005653197
8335145: RNCC: 3 | RNVC: 2
1005005653197: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-175-9201
Ball Joint

001759201
3713131-12: RNCC: 3 | RNVC: 2
3713131-12: RNCC: 5 | RNVC: 2
WW6666710SH3PC45-46: RNCC: 5 | RNVC: 2
WW8454703PC26-32: RNCC: 5 | RNVC: 2
W5586172SH1PC35-36: RNCC: 5 | RNVC: 2
WW5599124SH3PC45-46: RNCC: 5 | RNVC: 2
W5586122SH4PC35-36: RNCC: 5 | RNVC: 2
W5586172SH1PC35-36: RNCC: 5 | RNVC: 2
W5586172SH4PC35-36: RNCC: 5 | RNVC: 2
W5599060SH4PC49: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-127-2989
Mechanical Drive Housing

001272989
N24235PC2: RNCC: 3 | RNVC: 2
N24241PC1: RNCC: 3 | RNVC: 2
5157199: RNCC: 3 | RNVC: 2
NT10786PC2: RNCC: 5 | RNVC: 9
5157199: RNCC: 5 | RNVC: 9
NT10787PC1: RNCC: 5 | RNVC: 9
N24235PC2: RNCC: 5 | RNVC: 9
N24241PC1: RNCC: 5 | RNVC: 9
NT10787PC1: RNCC: 5 | RNVC: 9
NT4040PC1: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-708-5128
Shaft Collar

007085128
11A8717: RNCC: 3 | RNVC: 2
1199R434: RNCC: 5 | RNVC: 2
11BMT157: RNCC: 5 | RNVC: 2
1199R434: RNCC: 5 | RNVC: 2
4NFG016: RNCC: 5 | RNVC: 2
4NFG0164: RNCC: 5 | RNVC: 2
1199R434: RNCC: 5 | RNVC: 2
1199R434: RNCC: 5 | RNVC: 2
7-9-2: RNCC: 5 | RNVC: 2
1199R434: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-420-2018
Positioning Shoe

004202018
S805GE: RNCC: 3 | RNVC: 2
SG2025PC33: RNCC: 3 | RNVC: 2
SG2074PC33: RNCC: 3 | RNVC: 2
SG2144PC33: RNCC: 3 | RNVC: 2
S805GF: RNCC: 3 | RNVC: 2
SG2077PC33: RNCC: 3 | RNVC: 2
SG2127PC33: RNCC: 3 | RNVC: 2
SG2130PC33: RNCC: 3 | RNVC: 2
SG2141PC33: RNCC: 3 | RNVC: 2
SG2028PC33: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-860-7525
Linear Actuating Cylinder Assembly

008607525
4C611649: RNCC: 3 | RNVC: 2
4C605793: RNCC: 3 | RNVC: 2
35A7177: RNCC: 5 | RNVC: 2
66-4C611649: RNCC: 5 | RNVC: 9
66-4C605793: RNCC: 5 | RNVC: 9
35A13: RNCC: 5 | RNVC: 9
35A4947: RNCC: 5 | RNVC: 9
01935A13: RNCC: 5 | RNVC: 9
19-35A4947: RNCC: 5 | RNVC: 9
19-35A7177: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-146-4582
Shouldered Shaft

001464582
Y150S126PX3-20H: RNCC: 3 | RNVC: 2
Y150S126PX3-20H: RNCC: 3 | RNVC: 9
150S126PX3-20H: RNCC: 5 | RNVC: 9
150S126PX5-20H: RNCC: 5 | RNVC: 9
217301PC126: RNCC: 5 | RNVC: 9
217307PC126: RNCC: 5 | RNVC: 9
IR01-8639-126: RNCC: 5 | RNVC: 9
W154NTM500X2PC126A: RNCC: 5 | RNVC: 9
W254NTM500X4PC126A: RNCC: 5 | RNVC: 9
W254RTM500X3PC126: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-01-684-3268
Pawl

016843268
258T1126-5: RNCC: 3 | RNVC: 2

29 Oct 2019

3040-01-684-4867
Rigid Connecting Link

016844867
113T1307-41: RNCC: 3 | RNVC: 2

4 Nov 2019

3040-01-684-2483
Rigid Connecting Link

016842483
251T0100-249: RNCC: 3 | RNVC: 2

26 Oct 2019

3040-01-694-5584
Rigid Connecting Link

016945584
113T1957-3: RNCC: 3 | RNVC: 1

8 Apr 2021

3040-01-679-1705
Rigid Connecting Link

016791705
TL20049-101: RNCC: 3 | RNVC: 1

12 Mar 2019

3040-01-684-0837
Rigid Connecting Link

016840837
251T0100-406: RNCC: 3 | RNVC: 2

19 Oct 2019

3040-01-689-5486
Manual Control Lever

016895486
046-073-00: RNCC: 3 | RNVC: 2
046-073-00: RNCC: 3 | RNVC: 9
046-073-00: RNCC: 5 | RNVC: 9

26 Jun 2020

3040-01-693-5701
Shouldered Shaft

016935701
8628280-1: RNCC: 3 | RNVC: 2
8628280: RNCC: D | RNVC: 9

22 Feb 2021

3040-01-684-0436
Straight Shaft

016840436
251T4326-1: RNCC: 3 | RNVC: 2

17 Oct 2019

3040-01-684-7844
Rigid Connecting Link

016847844
4359919: RNCC: 3 | RNVC: 2

15 Nov 2019

3040-01-684-8932
Rigid Connecting Link

016848932
251T0100-180: RNCC: 3 | RNVC: 2

19 Nov 2019

3040-01-686-3016
Remote Control Lever

016863016
4359930: RNCC: 3 | RNVC: 2

7 Feb 2020

3040-01-692-3405
Rigid Connecting Link

016923405
13552421-1: RNCC: 3 | RNVC: 2
13552421-1: RNCC: 5 | RNVC: 9

8 Dec 2020

3040-01-694-8142
Rigid Connecting Link

016948142
251T1289-1: RNCC: 3 | RNVC: 1

26 Apr 2021

3040-01-679-1708
Rigid Connecting Link

016791708
TL20049-105: RNCC: 3 | RNVC: 1

12 Mar 2019

3040-01-684-0435
Straight Shaft

016840435
251T4325-1: RNCC: 3 | RNVC: 2

17 Oct 2019

3040-01-693-7864
Rigid Connecting Link

016937864
69B15978-7: RNCC: 3 | RNVC: 1

5 Mar 2021

3040-01-694-6754
Rigid Connecting Link

016946754
W21045-3586: RNCC: 3 | RNVC: 9

16 Apr 2021

3040-01-695-0742
Shouldered Shaft

016950742
233N7612-1: RNCC: 3 | RNVC: 1

12 May 2021

3040-01-681-3026
Straight Shaft

016813026
113T1228-2: RNCC: 3 | RNVC: 1

11 Jun 2019

3040-01-682-9770
Linear Actuating Cylinder Assembly

016829770
5-0014: RNCC: 3 | RNVC: 2

3 Sep 2019

3040-01-684-1113
Rigid Connecting Link

016841113
251T0100-184: RNCC: 3 | RNVC: 2

21 Oct 2019

3040-01-684-4495
Housing Adapter

016844495
43667: RNCC: 3 | RNVC: 2

4 Nov 2019

3040-01-684-9393
Rigid Connecting Link

016849393
251T3733-1: RNCC: 3 | RNVC: 2

20 Nov 2019

3040-01-689-5757
Nonaircraft Mechanical Actuator

016895757
3596AS291-1: RNCC: 1 | RNVC: 2
54289-ESCO-BA: RNCC: 3 | RNVC: 2

29 Jun 2020

3040-01-694-8517
Shouldered Shaft

016948517
233T8302-41: RNCC: 3 | RNVC: 1

29 Apr 2021

3040-01-684-1647
Rigid Connecting Link

016841647
251T0100-369: RNCC: 3 | RNVC: 2

23 Oct 2019

3040-01-684-2478
Rigid Connecting Link

016842478
251T0100-182: RNCC: 3 | RNVC: 2

26 Oct 2019

3040-01-684-2481
Rigid Connecting Link

016842481
251T0100-183: RNCC: 3 | RNVC: 2

26 Oct 2019

3040-01-678-4516
Rigid Connecting Link

016784516
141T7837-1: RNCC: 3 | RNVC: 1

6 Feb 2019

3040-01-679-1706
Rigid Connecting Link

016791706
TL20049-103: RNCC: 3 | RNVC: 1

12 Mar 2019

3040-01-684-2477
Rigid Connecting Link

016842477
251T0100-181: RNCC: 3 | RNVC: 2

26 Oct 2019

3040-01-680-7770
Straight Shaft

016807770
113T1228-1: RNCC: 3 | RNVC: 1

20 May 2019

3040-01-687-1462
Rigid Connecting Link

016871462
65B41247-157: RNCC: 3 | RNVC: 1

20 Mar 2020

3040-01-687-6030
Rigid Connecting Link

016876030
113T8115-503: RNCC: 3 | RNVC: 2

9 Apr 2020

3040-01-693-8656
Rigid Connecting Link

016938656
69B15978-4: RNCC: 3 | RNVC: 1

8 Mar 2021

3040-01-684-0439
Straight Shaft

016840439
251T4327-1: RNCC: 3 | RNVC: 2

17 Oct 2019

3040-01-684-1645
Rigid Connecting Link

016841645
251T0100-425: RNCC: 3 | RNVC: 2

23 Oct 2019

3040-01-694-5594
Centering Cam-Upper

016945594
162T1506-2: RNCC: 3 | RNVC: 1

8 Apr 2021

3040-01-684-2484
Rigid Connecting Link

016842484
251T0100-250: RNCC: 3 | RNVC: 2

26 Oct 2019

3040-01-684-1416
Straight Shaft

016841416
251T4328-1: RNCC: 3 | RNVC: 2

23 Oct 2019

3040-01-684-2482
Rigid Connecting Link

016842482
251T0100-251: RNCC: 3 | RNVC: 2

26 Oct 2019

3040-01-684-4860
Rigid Connecting Link

016844860
251T0100-405: RNCC: 3 | RNVC: 2

4 Nov 2019

3040-01-687-7081
Shouldered Shaft

016877081
69-26660-1: RNCC: 3 | RNVC: 1

14 Apr 2020

3040-01-694-5590
Rigid Connecting Link

016945590
113T1957-5: RNCC: 3 | RNVC: 1

8 Apr 2021

3040-01-650-2896
Linear Actuating Cylinder Assembly

016502896
333/E3449: RNCC: 3 | RNVC: 2

25 Nov 2015

3040-01-653-2714
Straight Shaft Assembly

016532714
140T2937-12: RNCC: 3 | RNVC: 1

16 Mar 2016

3040-01-653-4512
Straight Shaft Assembly

016534512
140T2664-1: RNCC: 3 | RNVC: 1

23 Mar 2016

3040-01-667-7617
Rigid Connecting Link

016677617
257T4307-1: RNCC: 3 | RNVC: 1

28 Oct 2017

3040-01-650-2899
Linear Actuating Cylinder Assembly

016502899
333/E3684: RNCC: 3 | RNVC: 2

25 Nov 2015

3040-01-653-9156
Flexible Drive Shaft

016539156
140312-8: RNCC: 3 | RNVC: 1
S140T264-8: RNCC: 7 | RNVC: 1

11 Apr 2016

3040-01-654-2093
Rigid Connecting Link

016542093
113T8220-5: RNCC: 3 | RNVC: 1

20 Apr 2016

3040-01-661-2235
Rigid Connecting Link

016612235
113T1293-10: RNCC: 3 | RNVC: 1

23 Feb 2017

3040-01-661-9220
Linear Actuating Cylinder Cap

016619220
252T3154-3: RNCC: 3 | RNVC: 1

20 Mar 2017

3040-01-662-0748
Rigid Connecting Link

016620748
252T1172-5: RNCC: 3 | RNVC: 1

25 Mar 2017

3040-01-667-0274
Nonaircraft Mechanical Actuator

016670274
J15662090-32: RNCC: 3 | RNVC: 2

29 Sep 2017

3040-01-643-7376
Nonaircraft Mechanical Actuator

016437376
648064: RNCC: 3 | RNVC: 2
648065: RNCC: 5 | RNVC: 9
12578138: RNCC: 7 | RNVC: 2

10 Apr 2015

3040-01-650-2909
Linear Actuating Cylinder Assembly

016502909
333/E3621: RNCC: 3 | RNVC: 2
333/E3621: RNCC: 5 | RNVC: 2

25 Nov 2015

3040-01-654-7820
Pivot Shaft Assembly

016547820
161T2010-7: RNCC: 3 | RNVC: 1

9 May 2016

3040-01-655-0558
Straight Shaft

016550558
14330-236: RNCC: 3 | RNVC: 1

17 May 2016

3040-01-661-8386
Straight Shaft Assembly

016618386
140T2937-10: RNCC: 3 | RNVC: 1

16 Mar 2017

3040-01-662-1637
Rigid Connecting Link

016621637
312T2359-25: RNCC: 3 | RNVC: 1

28 Mar 2017

3040-01-667-4610
Rigid Connecting Link

016674610
275T6227-7: RNCC: 3 | RNVC: 1

18 Oct 2017

3040-01-645-6175
Linear Actuating Cylinder Cap

016456175
301127: RNCC: 3 | RNVC: 9

23 Jun 2015

3040-01-652-4767
Rigid Connecting Link

016524767
312T3216-40: RNCC: 3 | RNVC: 1

23 Feb 2016

3040-01-667-4560
Piston Ring

016674560
GR04WB210AT40: RNCC: 3 | RNVC: 2
IS-34549: RNCC: D | RNVC: 9

17 Oct 2017

3040-01-671-3430
Piston Rod Ring

016713430
97226136: RNCC: 3 | RNVC: 2
4381405: RNCC: 7 | RNVC: 2

22 Mar 2018

3040-01-653-6263
Rigid Connecting Link

016536263
149T6935-1: RNCC: 3 | RNVC: 1

30 Mar 2016

3040-01-654-2096
Rigid Connecting Link

016542096
113T8220-9: RNCC: 3 | RNVC: 1

20 Apr 2016

3040-01-654-2410
Pawl

016542410
86398-20: RNCC: 3 | RNVC: 1

22 Apr 2016

3040-01-654-6053
Rigid Connecting Link

016546053
162T5002-3: RNCC: 3 | RNVC: 1

3 May 2016

3040-01-661-3295
Control Cam

016613295
251T2441-1: RNCC: 3 | RNVC: 1

27 Feb 2017

3040-01-662-0749
Control Cam

016620749
252T3118-4: RNCC: 3 | RNVC: 2

25 Mar 2017

3040-01-670-7311
Ball Joint

016707311
02651: RNCC: 3 | RNVC: 2
6072K11: RNCC: 5 | RNVC: 2

5 Mar 2018

3040-01-672-1804
Shaft Idler

016721804
GS-5252-1: RNCC: 3 | RNVC: 2
4350836: RNCC: 7 | RNVC: 2

24 Apr 2018

3040-01-673-8690
Rigid Connecting Link

016738690
149W5268-1: RNCC: 3 | RNVC: 1

30 Jun 2018

3040-01-654-0728
Helical Gearshaft

016540728
256T3104-1: RNCC: 3 | RNVC: 1

16 Apr 2016

3040-01-656-2572
Rigid Connecting Link

016562572
310T3032-13: RNCC: 3 | RNVC: 2

22 Jun 2016

3040-01-665-5310
Manual Control Lever Assembly

016655310
802774-3: RNCC: 3 | RNVC: 2

3 Aug 2017

3040-01-649-3213
Linear Actuating Cylinder Assembly

016493213
3969536: RNCC: 3 | RNVC: 2
M16698: RNCC: 5 | RNVC: 2
3969536: RNCC: 5 | RNVC: 2
3969536: RNCC: 5 | RNVC: 9

26 Oct 2015

3040-01-653-2711
Straight Shaft Assembly

016532711
140T2937-11: RNCC: 3 | RNVC: 1

16 Mar 2016

3040-01-652-6995
Rigid Connecting Link

016526995
332T4362-1: RNCC: 3 | RNVC: 1

1 Mar 2016

3040-01-661-4882
Rigid Connecting Link

016614882
65B41247-27: RNCC: 3 | RNVC: 1

4 Mar 2017

3040-01-661-6232
Straight Shaft Assembly

016616232
140312-5: RNCC: 3 | RNVC: 1

10 Mar 2017

3040-01-654-5400
Housing Adapter

016545400
MM3001: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-655-7906
Rigid Connecting Link

016557906
162T4008-10: RNCC: 3 | RNVC: 2

7 Jun 2016

3040-01-658-5553
Shaft Collar

016585553
4325320: RNCC: 3 | RNVC: 2
12001001: RNCC: 5 | RNVC: 9

3 Oct 2016

3040-01-664-8275
Mechanical Drive Housing

016648275
8M0107156: RNCC: 3 | RNVC: 2

7 Jul 2017

3040-01-652-6562
Rigid Connecting Link

016526562
332T4320-2: RNCC: 3 | RNVC: 1

29 Feb 2016

3040-01-653-4123
Straight Shaft Assembly

016534123
140312-7: RNCC: 3 | RNVC: 1

22 Mar 2016

3040-01-654-5379
Straight Shaft Assembly

016545379
256T5710-209: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-657-8041
Shouldered Shaft

016578041
3392AS766-1: RNCC: 3 | RNVC: 2
3392AS766: RNCC: D | RNVC: 9

30 Aug 2016

3040-01-645-4849
Hydraulic Accumulator Cylinder

016454849
RC-20-SA-2: RNCC: 3 | RNVC: 2

18 Jun 2015

3040-01-653-2738
Rigid Connecting Link

016532738
65B41247-152: RNCC: 3 | RNVC: 1

16 Mar 2016

3040-01-654-2099
Rigid Connecting Link

016542099
113T8315-3: RNCC: 3 | RNVC: 1

20 Apr 2016

3040-01-654-9211
Straight Shaft

016549211
0FV8150A01M05: RNCC: 3 | RNVC: 9
0FV8150A01M05: RNCC: 5 | RNVC: 9
0FV8150A01M05: RNCC: C | RNVC: 1

12 May 2016

3040-01-656-6543
Rigid Connecting Link

016566543
544 00211: RNCC: 3 | RNVC: 2
MHS-544 00211: RNCC: 5 | RNVC: 2

13 Jul 2016

3040-01-661-1929
Rigid Connecting Link

016611929
251T0100-306: RNCC: 3 | RNVC: 1

22 Feb 2017

3040-01-661-9207
Rigid Connecting Link

016619207
69-15812-2: RNCC: 3 | RNVC: 1

20 Mar 2017

3040-01-662-2497
Rigid Connecting Link

016622497
251T0100-148: RNCC: 3 | RNVC: 1

30 Mar 2017

3040-01-645-7382
Straight Axle

016457382
1040262: RNCC: 3 | RNVC: 2

25 Jun 2015

3040-01-651-1764
Push-Pull Control Assembly

016511764
KRF3000-TT-16.5: RNCC: 3 | RNVC: 2

7 Jan 2016

3040-01-652-3896
Rigid Connecting Link

016523896
312T2359-23: RNCC: 3 | RNVC: 1

20 Feb 2016

3040-01-652-7000
Rigid Connecting Link

016527000
315T3013-1: RNCC: 3 | RNVC: 1

1 Mar 2016

3040-01-653-4049
Shouldered Shaft

016534049
141T6163-2: RNCC: 3 | RNVC: 1

22 Mar 2016

3040-01-654-7741
Load Limiter Assembl

016547741
257T3502-5: RNCC: 3 | RNVC: 1

9 May 2016

3040-01-661-2262
Rigid Connecting Link

016612262
113T1293-9: RNCC: 3 | RNVC: 1

23 Feb 2017

3040-01-661-8387
Straight Shaft Assembly

016618387
140T2937-9: RNCC: 3 | RNVC: 1

16 Mar 2017

3040-01-662-1640
Rigid Connecting Link

016621640
312T2359-30: RNCC: 3 | RNVC: 1

28 Mar 2017

3040-01-670-4188
Rigid Connecting Link

016704188
02653: RNCC: 3 | RNVC: 2
2DLR3: RNCC: 5 | RNVC: 2

22 Feb 2018

3040-01-661-4068
Rigid Connecting Link

016614068
251T0100-149: RNCC: 3 | RNVC: 1

1 Mar 2017

3040-01-661-6583
Rigid Connecting Link

016616583
113T2401-5: RNCC: 3 | RNVC: 1

11 Mar 2017

3040-01-595-3598
Breather

015953598
415068: RNCC: 3 | RNVC: 2

26 Apr 2011

3040-01-600-1867
Ball Joint

016001867
2998K321: RNCC: 3 | RNVC: 2

15 Nov 2011

3040-01-605-4094
Rigid Connecting Link

016054094
347/20067: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-597-3428
Nonaircraft Mechanical Actuator

015973428
0936970000: RNCC: 3 | RNVC: 2
SKD168332: RNCC: D | RNVC: 9

7 Jun 2011

3040-01-619-9766
Shouldered Shaft

016199766
184-0060: RNCC: 3 | RNVC: 2

25 Jun 2013

3040-01-606-5156
Linear Actuating Cylinder Assembly

016065156
716 0152: RNCC: 3 | RNVC: 2

18 May 2012

3040-01-604-1688
Linear Actuating Cylinder Piston

016041688
P12611623: RNCC: 3 | RNVC: 2
P12611623: RNCC: 3 | RNVC: 9

28 Mar 2012

3040-01-618-9588
Rigid Connecting Link

016189588
65C18552-515: RNCC: 3 | RNVC: 2
65C18552-515: RNCC: 3 | RNVC: 2
65C18552-515: RNCC: 5 | RNVC: 2
65C18552-515: RNCC: 5 | RNVC: 2
65C18552-515: RNCC: 5 | RNVC: 9

13 May 2013

3040-01-617-5013
Breather

016175013
02096417: RNCC: 3 | RNVC: 2
EP-0009473: RNCC: 5 | RNVC: 2

25 Mar 2013

3040-01-617-1880
Linear Actuating Cylinder Assembly

016171880
CRC-2523: RNCC: 3 | RNVC: 2
CRC-2523: RNCC: 5 | RNVC: 2
F143318: RNCC: D | RNVC: 9

14 Mar 2013

3040-01-616-9017
Shouldered Shaft

016169017
5717178: RNCC: 3 | RNVC: 2
54953: RNCC: 5 | RNVC: 2

4 Mar 2013

3040-01-606-4107
Linear Actuating Cylinder Assembly

016064107
716 0032-P5: RNCC: 3 | RNVC: 2

17 May 2012

3040-01-622-2632
Hydraulic Accumulator Cylinder

016222632
061827: RNCC: 3 | RNVC: 2

2 Oct 2013

3040-01-596-5681
Rigid Connecting Link

015965681
4425937G: RNCC: 3 | RNVC: 2
4425937G: RNCC: 5 | RNVC: 2
4425937G: RNCC: 5 | RNVC: 9

19 May 2011

3040-01-627-0871
Rigid Connecting Link

016270871
12465875-4: RNCC: 3 | RNVC: 2
12465875: RNCC: D | RNVC: 9

1 Apr 2014

3040-01-642-5340
Linear Actuating Cylinder Assembly

016425340
3921292: RNCC: 1 | RNVC: 2
151234B: RNCC: 3 | RNVC: 2

27 Feb 2015

3040-01-607-2779
Bell Crank

016072779
220137: RNCC: 3 | RNVC: 2

7 Jun 2012

3040-01-612-6115
Linear Actuating Cylinder Assembly Parts Kit

016126115
57K7635: RNCC: 3 | RNVC: 2

16 Oct 2012

3040-01-573-9898
Linear Actuating Cylinder Assembly Parts Kit

015739898
BB278667A51: RNCC: 3 | RNVC: 2
BB278667AA / BB278667A51: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-575-5967
Shaft Idler

015755967
01-32086-000: RNCC: 3 | RNVC: 2

8 Jul 2009

3040-01-556-9064
Linear Actuating Cylinder Assembly

015569064
JEM7500: RNCC: 3 | RNVC: 2

9 Oct 2007

3040-01-568-4469
Nonaircraft Mechanical Actuator

015684469
0511/15S704100: RNCC: 3 | RNVC: 2
MS05Q: RNCC: 5 | RNVC: 9

30 Oct 2008

3040-01-568-6678
Push-Pull Control Assembly

015686678
040489-146: RNCC: 3 | RNVC: 2

5 Nov 2008

3040-01-569-3680
Linear Actuating Cylinder Assembly

015693680
12505545: RNCC: 1 | RNVC: 2
9010000178: RNCC: 3 | RNVC: 2

1 Dec 2008

3040-01-556-0789
Brake Shoe

015560789
834969G040: RNCC: 3 | RNVC: 2

24 Sep 2007

3040-01-561-9283
Linear Actuating Cylinder Assembly

015619283
2051325: RNCC: 3 | RNVC: 2

24 Mar 2008

3040-01-559-1785
Shouldered Shaft

015591785
RB1076: RNCC: 3 | RNVC: 2

7 Dec 2007

3040-01-573-9921
Nonrotating Shaft Eye Bracket

015739921
111557301: RNCC: 3 | RNVC: 2
111557301: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-591-8978
Bevel Gear And Shaft Assembly

015918978
822571: RNCC: 3 | RNVC: 2
822571: RNCC: 5 | RNVC: 2

15 Feb 2011

3040-01-564-5215
Mechanical Drive Housing

015645215
355-6100: RNCC: 3 | RNVC: 2
14KP711: RNCC: 5 | RNVC: 2
14KP711: RNCC: 5 | RNVC: 9
246-4730: RNCC: 5 | RNVC: 9

19 Jun 2008

3040-01-577-7117
Linear Actuating Cylinder Assembly

015777117
1684474: RNCC: 3 | RNVC: 2
150820B: RNCC: 5 | RNVC: 9

15 Sep 2009

3040-01-579-4923
Body Hub

015794923
A-333-W-4235: RNCC: 3 | RNVC: 2

13 Nov 2009

3040-01-585-6638
Linear Actuating Cylinder Piston Rod

015856638
18-006-054: RNCC: 3 | RNVC: 2
1003-04-D FIND NO. 22: RNCC: 3 | RNVC: 9

2 Jun 2010

3040-01-572-7391
Linear Actuating Cylinder Assembly

015727391
9010000217: RNCC: 3 | RNVC: 2
12505529: RNCC: 7 | RNVC: 2

24 Mar 2009

3040-01-579-8459
Rigid Connecting Link

015798459
12509493: RNCC: 3 | RNVC: 2

25 Nov 2009

3040-01-567-2634
Control Cam

015672634
12505531: RNCC: 3 | RNVC: 2

22 Sep 2008

3040-01-555-7597
Linear Actuating Cylinder Assembly

015557597
320548B: RNCC: 3 | RNVC: 2
141172B ITEM 7: RNCC: 5 | RNVC: 2

12 Sep 2007

3040-01-563-4404
Linear Actuating Cylinder Piston Rod

015634404
8242878: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-586-8952
Ball Joint

015868952
3950-7: RNCC: 3 | RNVC: 2

19 Jul 2010

3040-01-557-1259
Flexible Shaft Assembly

015571259
FADEL25BZ1: RNCC: 3 | RNVC: 2
7579228-001: RNCC: 7 | RNVC: 2

12 Oct 2007

3040-01-572-5859
Linear Actuating Cylinder

015725859
87705799: RNCC: 3 | RNVC: 2
87705800: RNCC: 3 | RNVC: 9
57705799: RNCC: 5 | RNVC: 2

17 Mar 2009

3040-01-578-3873
Shouldered Shaft

015783873
HM029-425-1: RNCC: 3 | RNVC: 2

5 Oct 2009

3040-01-560-4945
Control Cam

015604945
12473245: RNCC: 3 | RNVC: 2

1 Feb 2008

3040-01-566-7914
Shouldered Shaft

015667914
LA-143: RNCC: 3 | RNVC: 9
LA-143: RNCC: 5 | RNVC: 2

10 Sep 2008

3040-01-583-8944
Linear Actuating Cylinder Assembly

015838944
PSH00010-12-11-1X12: RNCC: 3 | RNVC: 2
PSH12-12: RNCC: 3 | RNVC: 9

9 Apr 2010

3040-01-590-2265
Nonaircraft Mechanical Actuator

015902265
13023199: RNCC: 1 | RNVC: 2
DSI-EXL-00001: RNCC: 3 | RNVC: 2

23 Nov 2010

3040-01-526-1496
Linear Actuating Cylinder Assembly

015261496
52021: RNCC: 3 | RNVC: 2

9 Dec 2004

3040-01-530-3314
Control Cable Assembly

015303314
65042-85FT0IN: RNCC: 3 | RNVC: 2
P-2377 SHT 6 FIND 9: RNCC: 5 | RNVC: 2

23 May 2005

3040-01-532-3402
Linear Actuating Cylinder

015323402
1802259: RNCC: 3 | RNVC: 9
1802259: RNCC: 5 | RNVC: 2
496-3199: RNCC: 5 | RNVC: 9

4 Aug 2005

3040-01-548-4783
Linear Actuating Cylinder Assembly

015484783
87454017: RNCC: 3 | RNVC: 2
1346189C2: RNCC: 5 | RNVC: 9

23 Feb 2007

3040-01-546-1061
Linear Actuating Cylinder Assembly

015461061
333/E3650: RNCC: 3 | RNVC: 2
CV165710H: RNCC: 5 | RNVC: 2
347/21007: RNCC: 5 | RNVC: 9

6 Dec 2006

3040-01-540-0340
Spur Gearshaft

015400340
12441890: RNCC: 3 | RNVC: 2

8 May 2006

3040-01-524-7762
Shouldered Shaft

015247762
4KK622: RNCC: 3 | RNVC: 2
4KK622: RNCC: 3 | RNVC: 9
499-2211: RNCC: 5 | RNVC: 2

15 Oct 2004

3040-01-537-7225
Pawl

015377225
10052654: RNCC: 3 | RNVC: 2

22 Feb 2006

3040-01-540-0185
Shouldered Shaft

015400185
12443769: RNCC: 3 | RNVC: 2

5 May 2006

3040-01-549-1851
Worm Wheel Gearshaft

015491851
16D33-B: RNCC: 3 | RNVC: 9
16D33-UB: RNCC: 5 | RNVC: 2
16D33-UB: RNCC: 5 | RNVC: 9

14 Mar 2007

3040-01-526-4991
Linear Actuating Cylinder

015264991
4KK626: RNCC: 3 | RNVC: 2
4KK626: RNCC: 3 | RNVC: 9
499-2342: RNCC: 5 | RNVC: 2

20 Dec 2004

3040-01-528-5112
Extension Shaft

015285112
112130128: RNCC: 3 | RNVC: 2

16 Mar 2005

3040-01-541-9790
Iso Sp0ol With Gauge And Tubing

015419790
5600280: RNCC: 3 | RNVC: 2
5900079 ITEM 19: RNCC: 5 | RNVC: 9
5600280: RNCC: 5 | RNVC: 9

19 Jul 2006

3040-01-524-7763
Straight Shaft

015247763
4KK624: RNCC: 3 | RNVC: 2
4KK624: RNCC: 3 | RNVC: 9
499-2288: RNCC: 5 | RNVC: 2

15 Oct 2004

3040-01-526-0362
Manual Control Lever

015260362
802T-W16: RNCC: 3 | RNVC: 2
AV0616 FIND 6: RNCC: 5 | RNVC: 2

4 Dec 2004

3040-01-529-2874
Manual Control Lever Assembly

015292874
37D00706-010: RNCC: 3 | RNVC: 2
23533087: RNCC: 5 | RNVC: 2

12 Apr 2005

3040-01-532-1803
Body Hub

015321803
010481602151: RNCC: 3 | RNVC: 2
000993-963-2: RNCC: 5 | RNVC: 2
5010481602151: RNCC: 5 | RNVC: 9
601-048160-0001: RNCC: 5 | RNVC: 9
3040PL1217407: RNCC: 6 | RNVC: 9
000993-963: RNCC: 7 | RNVC: 2

1 Aug 2005

3040-01-548-8531
Breather

015488531
D101: RNCC: 3 | RNVC: 2

6 Mar 2007

3040-01-528-1594
Rigid Connecting Link

015281594
APC30017: RNCC: 3 | RNVC: 2
APC30017: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-546-3069
Linear Actuating Cylinder Assembly

015463069
HC5312-3: RNCC: 3 | RNVC: 2
HC5312: RNCC: 5 | RNVC: 9

13 Dec 2006

3040-01-524-7458
Linear Actuating Cylinder Assembly

015247458
4KK625: RNCC: 3 | RNVC: 2
4KK625: RNCC: 3 | RNVC: 9
499-2334: RNCC: 5 | RNVC: 2

14 Oct 2004

3040-01-528-3168
Shouldered Shaft

015283168
29542543: RNCC: 3 | RNVC: 2
5HA247: RNCC: 5 | RNVC: 2
29516499: RNCC: 5 | RNVC: 9
5HA247: RNCC: 5 | RNVC: 9

9 Mar 2005

3040-01-527-9313
Shouldered Shaft

015279313
62031A: RNCC: 3 | RNVC: 2

24 Feb 2005

3040-01-549-1854
Worm Wheel Gearshaft

015491854
16D33-UG: RNCC: 3 | RNVC: 2
16D33-G: RNCC: 3 | RNVC: 9

14 Mar 2007

3040-01-507-7892
Spur Gearshaft

015077892
1703422: RNCC: 3 | RNVC: 2

6 May 2003

3040-01-508-1747
Linear Actuating Cylinder Assembly

015081747
1-5381: RNCC: 3 | RNVC: 2
1-5381: RNCC: 5 | RNVC: 9

14 May 2003

3040-01-513-4503
Brake Shoe

015134503
BW8733E ITEM 12: RNCC: 3 | RNVC: 2
558SPB: RNCC: 5 | RNVC: 2

25 Sep 2003

3040-01-514-0100
Linear Actuating Cylinder Assembly Parts Kit

015140100
3J14763: RNCC: 3 | RNVC: 2

14 Oct 2003

3040-01-522-6858
Rigid Connecting Link

015226858
12423354-003: RNCC: 3 | RNVC: 2
12423354-003: RNCC: 5 | RNVC: 2
12423354-001: RNCC: 5 | RNVC: 9
12423354: RNCC: D | RNVC: 9

9 Aug 2004

3040-01-518-3216
Rigid Connecting Link

015183216
12475675: RNCC: 3 | RNVC: 2

9 Mar 2004

3040-01-507-9363
Linear Actuating Cylinder Assembly

015079363
189653A2: RNCC: 3 | RNVC: 2

8 May 2003

3040-01-521-9236
Straight Shaft

015219236
106-0252: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 10: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-522-2674
Push-Pull Control Assembly

015222674
4602BG4-097B: RNCC: 3 | RNVC: 2
4602BG4-097: RNCC: 5 | RNVC: 9
1588 ITEM 44: RNCC: 5 | RNVC: 9
1588 ITEM 44: RNCC: C | RNVC: 1

26 Jul 2004

3040-01-513-4577
Single Disk Brake

015134577
AFS0200990DL000: RNCC: 3 | RNVC: 2
1205-1148-1: RNCC: 5 | RNVC: 2
1205-1148 REV A: RNCC: 5 | RNVC: 2
A9876 REV 3: RNCC: D | RNVC: 9

25 Sep 2003

3040-01-514-0085
Linear Actuating Cylinder Assembly Parts Kit

015140085
3J14408: RNCC: 3 | RNVC: 2

14 Oct 2003

3040-01-504-7842
Rigid Connecting Link

015047842
300-30131-01: RNCC: 3 | RNVC: 2
0-001-110-01 FIND NO 74: RNCC: 5 | RNVC: 2
0-101-300-02: RNCC: 5 | RNVC: 9
0-101-300-02: RNCC: 5 | RNVC: 9
0-001-110-01: RNCC: D | RNVC: 9

10 Feb 2003

3040-01-506-3692
Linear Actuating Cylinder Assembly

015063692
1H2H0A00027879: RNCC: 3 | RNVC: 2
1.50CBB2HLTVS28AC19.500: RNCC: 5 | RNVC: 2
HH279031A: RNCC: 5 | RNVC: 9

28 Mar 2003

3040-01-515-3547
Linear Actuating Cylinder Cap

015153547
245651: RNCC: 3 | RNVC: 2
501-01-1996: RNCC: 3 | RNVC: 9

21 Nov 2003

3040-01-519-6611
Linear Actuating Cylinder Assembly

015196611
9T8039: RNCC: 3 | RNVC: 2

27 Apr 2004

3040-01-511-2361
Shouldered Shaft

015112361
243-6985876-36: RNCC: 3 | RNVC: 2
H7130105A-36A: RNCC: 5 | RNVC: 2
H7130105-36: RNCC: 5 | RNVC: 9
H7130105A-36: RNCC: 5 | RNVC: 9
6985876: RNCC: D | RNVC: 9

5 Aug 2003

3040-01-512-1726
Brake Disc

015121726
95C4B2B098D: RNCC: 3 | RNVC: 2
7D3-07599 REV H ITEM 33: RNCC: 5 | RNVC: 2
7D3-07599: RNCC: D | RNVC: 9

25 Aug 2003

3040-01-512-2010
Master Rebuild Kit

015122010
95-015-3251: RNCC: 3 | RNVC: 2

26 Aug 2003

3040-01-512-3729
Linear Actuating Cylinder Assembly

015123729
SEF863: RNCC: 3 | RNVC: 9

28 Aug 2003

3040-01-511-5526
Linear Actuating Cylinder Assembly

015115526
6623365: RNCC: 3 | RNVC: 2
6623867: RNCC: 3 | RNVC: 2
6623365: RNCC: 5 | RNVC: 9
6623867: RNCC: 5 | RNVC: 9

12 Aug 2003

3040-01-519-7330
Linear Actuating Cylinder

015197330
1HA162: RNCC: 3 | RNVC: 2
1HA162: RNCC: 3 | RNVC: 9
4900148-003: RNCC: 5 | RNVC: 2

29 Apr 2004

3040-01-521-9156
Linear Actuating Cylinder Assembly

015219156
1.50 BB3LCT24A 7.000: RNCC: 3 | RNVC: 2
PL 15861020 FN 3: RNCC: 5 | RNVC: 2
15866000 REV G IT 9: RNCC: 5 | RNVC: 2
PL 15861040 FN 3: RNCC: 5 | RNVC: 2
15866000-12: RNCC: 5 | RNVC: 2
PL 15861020 FN 3: RNCC: 5 | RNVC: 9
PL 15861040 FN 3: RNCC: 5 | RNVC: 9
15866000 REV G IT 9: RNCC: 5 | RNVC: 9
1.5"BB-3LT24A7: RNCC: 5 | RNVC: 9
15866000-12: RNCC: 5 | RNVC: 9

10 Jul 2004

3040-01-505-3325
Rotating Shaft Eye Bracket

015053325
5599884-11: RNCC: 3 | RNVC: 2

4 Mar 2003

3040-01-486-4251
Shouldered Shaft

014864251
342-7067322-67: RNCC: 3 | RNVC: 2
H643-7003-67: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

28 Jun 2001

NSN 3040-01-500-5349 015005349 BRACKET,EYE,NONROTATING SHAFT

3040-01-500-5349
Nonrotating Shaft Eye Bracket

015005349
21C7082P07: RNCC: 3 | RNVC: 2
21C7082P07: RNCC: 5 | RNVC: 2
21C7082P07: RNCC: 5 | RNVC: 2
21C7082P07: RNCC: 5 | RNVC: 9
21C7082: RNCC: D | RNVC: 9

29 Aug 2002

3040-01-479-8326
Linear Actuating Cylinder Assembly

014798326
6-372-100143: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-492-6051
Breather

014926051
DC125E: RNCC: 3 | RNVC: 2

5 Dec 2001

3040-01-499-1397
Spur Gearshaft

014991397
03018000-10: RNCC: 3 | RNVC: 2
425B242AC: RNCC: 5 | RNVC: 9

15 Jul 2002

3040-01-503-1047
Bevel Gearshaft

015031047
786203: RNCC: 3 | RNVC: 2
786203: RNCC: 5 | RNVC: 2

4 Dec 2002

3040-01-478-1151
Linear Actuating Cylinder

014781151
135444: RNCC: 3 | RNVC: 2

30 Aug 2000

Load More Results