What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 106 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 106 of 300

3040-00-005-8064
Bell Crank

000058064
A51C31566-11: RNCC: 3 | RNVC: 2
A51C31566-1: RNCC: 3 | RNVC: 2
A51C31566-11: RNCC: 5 | RNVC: 9
A51C31566-1: RNCC: 5 | RNVC: 9

19 Jun 1972

3040-00-005-8058
Rigid Connecting Link

000058058
472P521C005-7: RNCC: 3 | RNVC: 2

19 Jun 1972

3040-00-005-7680
Shouldered Shaft

000057680
481287-1: RNCC: 3 | RNVC: 2

19 Jun 1972

3040-00-005-7676
Linear Actuating Cylin Parts Kit

1 Jan 1900

3040-00-005-7654

1 Jan 1900

3040-00-005-7650
Straight Shaft

000057650
483596-1: RNCC: 3 | RNVC: 2
483596-1: RNCC: 5 | RNVC: 9

19 Jun 1972

3040-00-005-7651
Straight Shaft

000057651
483598-1: RNCC: 3 | RNVC: 2
483598-1: RNCC: 5 | RNVC: 9

19 Jun 1972

3040-00-005-7582

1 Jan 1900

3040-00-005-7136
Shouldered Shaft

000057136
109707-1: RNCC: 3 | RNVC: 2

16 Jun 1972

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

3040-00-005-5665
Rigid Connecting Link

000055665
A51C31065-7: RNCC: 3 | RNVC: 2
A51C31065-5: RNCC: 5 | RNVC: 2
A51C31065-7: RNCC: 5 | RNVC: 9
A51C31065-5: RNCC: 5 | RNVC: 9

16 Jun 1972

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Dec 1993

3040-00-005-5036
Drive Shaft

1 Jan 1900

3040-00-005-4161
Shouldered Shaft

1 Jan 1900

3040-00-005-3725
Rigid Connecting Link

1 Jan 1900

3040-00-005-3482

1 Jan 1900

3040-00-005-2160
Straight Shaft

000052160
385203-1: RNCC: 3 | RNVC: 2

14 Jun 1972

3040-00-005-1621
Spur Gearshaft

000051621
203881-1: RNCC: 3 | RNVC: 2

16 Jun 1972

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

3040-00-004-9969
Bell Crank

7 Jun 1972

3040-00-004-9835
Bell Crank

7 Jun 1972

3040-00-004-9790
Bell Crank

16 Jun 1972

3040-00-004-9791
Bell Crank

16 Jun 1972

3040-00-004-9405
Spur Gearshaft

000049405
1539752: RNCC: 3 | RNVC: 2

7 Jun 1972

3040-00-004-8407
Hydraulic Cylinder

000048407
1540136: RNCC: 3 | RNVC: 2

7 Jun 1972

3040-00-004-8406
Linear Actuating Cylinder

7 Jun 1972

3040-00-004-8299

1 Jan 1900

3040-00-004-8273

1 Jan 1900

3040-00-004-4892
Rigid Connecting Link

7 Jun 1972

3040-00-004-4857
Bell Crank

000044857
A51C34502-5: RNCC: 3 | RNVC: 2
A51C34502-5: RNCC: 5 | RNVC: 9

7 Jun 1972

3040-00-004-4858
Bell Crank

000044858
A51C34502-6: RNCC: 3 | RNVC: 2
A51C34502-6: RNCC: 5 | RNVC: 9

7 Jun 1972

3040-00-004-4789

1 Jan 1900

3040-00-004-4461

1 Dec 1993

3040-00-004-4266
Shouldered Shaft

000044266
41862: RNCC: 3 | RNVC: 2

7 Jun 1972

3040-00-004-3943

1 Jan 1900

3040-00-004-3678
Worm Shaft

000043678
531867-3: RNCC: 3 | RNVC: 2

7 Jun 1972

3040-00-004-2948

1 Jan 1900

3040-00-004-2939
Rigid Connecting Link

000042939
A51P60735-1: RNCC: 3 | RNVC: 2
A51P60735-1: RNCC: 5 | RNVC: 9

7 Jun 1972

3040-00-004-2803
Straight Shaft

000042803
A51G10667-11: RNCC: 3 | RNVC: 2
A51G10667-11: RNCC: 5 | RNVC: 9

7 Jun 1972

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

3040-00-004-1931
Body Hub

000041931
482775-1: RNCC: 3 | RNVC: 2

7 Jun 1972

3040-00-004-1321
Rigid Connecting Link

000041321
A51B92610-1: RNCC: 3 | RNVC: 2
A51B92610-1: RNCC: 5 | RNVC: 9

24 May 1972

3040-00-004-1357
Bell Crank

24 May 1972

3040-00-004-1280
Spur Gearshaft

000041280
G7117-033-02: RNCC: 3 | RNVC: 2
G7117-033-02: RNCC: 5 | RNVC: 9

24 May 1972

3040-00-003-9962

1 Jan 1900

3040-00-003-8617
Manual Control Lever

000038617
68883-01: RNCC: 3 | RNVC: 2

7 Jun 1972

3040-00-003-8329
Brake Drum Assembly

000038329
483202-1: RNCC: 3 | RNVC: 2
483202-1: RNCC: 5 | RNVC: 9

7 Jun 1972

3040-00-003-7912
Shouldered Shaft

1 Jan 1900

3040-00-003-7900
Shouldered Shaft

1 Jan 1900

3040-00-003-7563

1 Jan 1900

3040-00-003-7572
Shaft Retaining Plate

000037572
D1-10724B2: RNCC: 3 | RNVC: 2
D1-10724B-2: RNCC: 5 | RNVC: 2

26 May 1972

3040-00-003-7219

1 Jan 1900

3040-00-003-7226
Shaft Collar

1 Jan 1900

3040-00-003-6475

1 Jan 1900

3040-00-003-6419
Rigid Connecting Link

000036419
A51C21053-3: RNCC: 3 | RNVC: 2
A51C21053-5: RNCC: 3 | RNVC: 2
A51C21053-3: RNCC: 5 | RNVC: 9
A51C21053-5: RNCC: 5 | RNVC: 9

26 May 1972

3040-00-003-5930
Straight Shaft

000035930
483594-1: RNCC: 3 | RNVC: 2

26 May 1972

3040-00-003-5599
Mechanical Drive Housing

1 Jan 1900

3040-00-003-5391
Differential Gear Unit

000035391
A51M20015-3: RNCC: 3 | RNVC: 2
A51M20015-1: RNCC: 5 | RNVC: 2
A51M20015-1: RNCC: 5 | RNVC: 9
A51M20015-3: RNCC: 5 | RNVC: 9

26 May 1972

3040-00-003-5312
Mechanical Drive Housing

17 May 1972

3040-00-003-5235

1 Jan 1900

3040-00-003-5232
Shouldered Shaft

1 Jan 1900

3040-00-003-4851
Straight Shaft

000034851
S1-8: RNCC: 3 | RNVC: 2
A8-6: RNCC: 3 | RNVC: 2

24 May 1972

3040-00-003-4500
Mechanical Drive Housing

24 May 1972

3040-00-003-4448
Body Hub

000034448
041-00002-00: RNCC: 3 | RNVC: 2

24 May 1972

3040-00-003-3100

1 Jan 1900

3040-00-003-1142

1 Jan 1900

3040-00-003-0533
Spur Gearshaft

000030533
23702: RNCC: 3 | RNVC: 2

21 May 1972

3040-00-003-0512
Shouldered Shaft

000030512
A51M20603-13: RNCC: 3 | RNVC: 2
A51M20603-13: RNCC: 5 | RNVC: 9

17 May 1972

3040-00-003-0510
Wormshaft And Gear

000030510
A51M20031-1: RNCC: 3 | RNVC: 2
A51M20031-1: RNCC: 5 | RNVC: 2
A51M20031-1: RNCC: 5 | RNVC: 9

17 May 1972

3040-00-003-0496

1 Jan 1900

3040-00-003-0495
Rigid Connecting Link

1 Jan 1900

3040-00-003-0480
Rigid Connecting Link

000030480
A51C22052-5: RNCC: 3 | RNVC: 2
A51C22052-5: RNCC: 5 | RNVC: 9

17 May 1972

3040-00-003-0450
Rigid Connecting Link

000030450
A51G20500-4: RNCC: 3 | RNVC: 2
A51G20500-4: RNCC: 5 | RNVC: 9

17 May 1972

3040-00-003-0494
Rigid Connecting Link

17 May 1972

3040-00-003-0420

1 Jan 1900

3040-00-003-0429
Helical Gearshaft

000030429
411D00670: RNCC: 3 | RNVC: 2

21 May 1972

3040-00-003-0395
Shouldered Shaft

000030395
PH1118130-1: RNCC: 3 | RNVC: 2
PH1118130-1: RNCC: 5 | RNVC: 9

17 May 1972

3040-00-003-0262
Zero Adjuster Shaft

000030262
252503-001: RNCC: 3 | RNVC: 2

11 May 1972

3040-00-003-0141
Linear Actuating Cylinder Assembly Parts Kit

000030141
6421-25: RNCC: 3 | RNVC: 2

11 May 1972

3040-00-003-0136
Snubber Ring

000030136
D12226: RNCC: 3 | RNVC: 2
D12226: RNCC: 5 | RNVC: 9

11 May 1972

3040-00-003-0139
Linear Actuating Cylinder Assembly Parts Kit

000030139
6510-15: RNCC: 3 | RNVC: 2

11 May 1972

3040-00-003-0140
Linear Actuating Cylinder Assembly Parts Kit

000030140
6436-50: RNCC: 3 | RNVC: 2
6436-50: RNCC: 5 | RNVC: 9

11 May 1972

3040-00-003-0099
Shouldered Shaft

11 May 1972

3040-00-003-0051
Brake Shoe

11 May 1972

3040-00-002-8839

1 Jan 1900

3040-00-001-9230
Manual Control Lever

000019230
8417193: RNCC: 3 | RNVC: 2
8417193: RNCC: 5 | RNVC: 2

7 Oct 1972

3040-00-001-8858
Straight Shaft

000018858
777-6004-003: RNCC: 3 | RNVC: 2

4 Oct 1972

3040-00-001-8400
Rigid Connecting Link

000018400
4N21267-105B: RNCC: 3 | RNVC: 2

4 Oct 1972

3040-00-001-8354
Control Cam

000018354
42234-78: RNCC: 3 | RNVC: 2
42234E78: RNCC: 5 | RNVC: 9

4 Oct 1972

3040-00-001-8353
Control Cam

000018353
42234-77: RNCC: 3 | RNVC: 2
42234E77: RNCC: 5 | RNVC: 9

4 Oct 1972

3040-00-001-8298
Rigid Connecting Link

000018298
8461-73159-1: RNCC: 3 | RNVC: 2

4 Oct 1972

3040-00-001-7773
Shouldered Shaft

000017773
089121: RNCC: 3 | RNVC: 2

27 Sep 1972

3040-00-001-7748

1 Jan 1900

3040-00-001-6795
Rigid Connecting Link

000016795
342-106175-7: RNCC: 3 | RNVC: 2

5 Nov 1972

3040-00-001-6796
Rigid Connecting Link

000016796
F310945-60: RNCC: 3 | RNVC: 2

3 Dec 1972

3040-00-001-6784
Shaft Collar

000016784
54000-40048: RNCC: 3 | RNVC: 2

5 Nov 1972

3040-00-001-6774
Rigid Connecting Link

5 Nov 1972

3040-00-001-6775
Rigid Connecting Link

000016775
709-1076-3: RNCC: 3 | RNVC: 2

5 Nov 1972

3040-00-001-6560

1 Jan 1900

3040-00-001-6490
Spur Gearshaft

000016490
2876042: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-001-6253

1 Jan 1900

3040-00-001-6234
Shouldered Shaft

000016234
A37696: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-001-6258
Linear Actuating Cylinder Piston Rod

000016258
D43081: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-001-6233
Spur Gearshaft

000016233
A37666: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-001-6226

1 Jan 1900

3040-00-001-6231
Shaft Assembly

000016231
A39077: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-001-6217
Manual Control Lever

1 Jan 1900

3040-00-001-6135

1 Jan 1900

3040-00-001-5995

1 Jan 1900

3040-00-001-5523
Shouldered Shaft

000015523
134765-2: RNCC: 3 | RNVC: 2

29 Sep 1972

3040-00-001-5316
Pawl

000015316
5211796: RNCC: 3 | RNVC: 9

29 Sep 1972

3040-00-001-5209
Manual Control Lever

000015209
8461-67842-1: RNCC: 3 | RNVC: 2

29 Sep 1972

3040-00-001-5195
Spur Gearshaft

000015195
47P238291-21-11: RNCC: 3 | RNVC: 2

29 Sep 1972

3040-00-001-4603
Shouldered Shaft

000014603
32-01025-1: RNCC: 3 | RNVC: 2

22 Sep 1972

3040-00-001-4457
Rigid Connecting Link

000014457
A51C34050-9: RNCC: 3 | RNVC: 2
A51C34050-9: RNCC: 5 | RNVC: 2
A51C34050-9: RNCC: 5 | RNVC: 2
18A787-3: RNCC: 5 | RNVC: 9
18A787: RNCC: D | RNVC: 9

29 Sep 1972

3040-00-001-4458
Rigid Connecting Link

29 Sep 1972

3040-00-001-4469
Spur Gearshaft

000014469
SYLC738: RNCC: 3 | RNVC: 2

29 Sep 1972

3040-00-001-3985
Shouldered Shaft

000013985
8916-4-1: RNCC: 3 | RNVC: 2
8916-1: RNCC: D | RNVC: 9

29 Sep 1972

3040-00-001-3979
Shaft Collar

1 Jan 1900

3040-00-001-3936

1 Jan 1900

3040-00-001-3470
Rigid Connecting Link

20 Sep 1972

3040-00-001-3469
Rigid Connecting Link

20 Sep 1972

3040-00-001-3462

1 Jan 1900

3040-00-001-3401

1 Jan 1900

3040-00-001-3385
Shaft Collar

000013385
G13458: RNCC: 3 | RNVC: 2

20 Sep 1972

3040-00-001-3386

1 Jan 1900

3040-00-001-3400

1 Jan 1900

3040-00-001-2663
Pawl

24 Sep 1972

3040-00-001-2047

1 Jan 1900

3040-00-001-1717
Bell Crank

000011717
A51C22502-3: RNCC: 3 | RNVC: 2
A51C22502-3: RNCC: 5 | RNVC: 9

24 Sep 1972

3040-00-001-1700
Rigid Connecting Link

000011700
123L10010-501: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-001-1701
Rigid Connecting Link

000011701
123L10011-501: RNCC: 3 | RNVC: 2
123L10011-501: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-001-1684
Rigid Connecting Link

000011684
975594-1: RNCC: 3 | RNVC: 2
975594-1: RNCC: 5 | RNVC: 9

24 Sep 1972

3040-00-001-1302

1 Jan 1900

3040-00-001-1244

1 Jan 1900

3040-00-001-1224
Straight Shaft

000011224
GS304: RNCC: 3 | RNVC: 2
070202-4-24: RNCC: 5 | RNVC: 9

24 Sep 1972

3040-00-001-0078
Straight Shaft

000010078
070202-4-30: RNCC: 3 | RNVC: 2

24 Sep 1972

3040-00-001-0089

1 Jan 1900

3040-00-001-0077
Straight Shaft

000010077
070202-4-28: RNCC: 3 | RNVC: 2

24 Sep 1972

1 Jan 1900

1 Jan 1900

1 Jan 1900

1 Jan 1900

3040-01-708-8264
Rigid Connecting Link

017088264
709-4403687-PART-NO-37: RNCC: 3 | RNVC: 2
709-4554791-PART-NO-124: RNCC: 5 | RNVC: 2
1706-136-PART-NO-124: RNCC: C | RNVC: 1
1706-50-PART-NO-37: RNCC: C | RNVC: 1

26 Apr 2023

3040-01-707-5441
Extension Shaft

017075441
27-18863: RNCC: 3 | RNVC: 2
18272: RNCC: D | RNVC: 9

8 Feb 2023

3040-01-706-2241
Piston Ring

017062241
F.US300308.25.3: RNCC: 3 | RNVC: 2

9 Nov 2022

3040-01-707-1263
Worm Shaft

017071263
219-8203088PART464: RNCC: 3 | RNVC: 1

18 Jan 2023

3040-01-707-1239
Rigid Connecting Link

017071239
ML2-33.81: RNCC: 3 | RNVC: 2

18 Jan 2023

3040-01-709-0358
Nonrotating Shaft Eye Bracket

017090358
709-6225716-ITEM-NO-30: RNCC: 3 | RNVC: 2
709-6225715-ITEM-NO-57: RNCC: 5 | RNVC: 2

8 May 2023

3040-01-255-5595
Push-Pull Control Assembly

012555595
D032377-3-240: RNCC: 3 | RNVC: 2
32377-003-240IN: RNCC: 5 | RNVC: 2
33C-20FT: RNCC: 5 | RNVC: 2
32377-003-20FT: RNCC: 5 | RNVC: 2
33-C-240IN: RNCC: 5 | RNVC: 2
D032377-20FT: RNCC: 5 | RNVC: 2
D032377-20FT: RNCC: 5 | RNVC: 9
D032377-3-240: RNCC: 5 | RNVC: 9
32377-003-20FT: RNCC: 5 | RNVC: 9
33C-20FT: RNCC: 5 | RNVC: 9

22 May 1987

3040-01-708-1229
Shouldered Shaft

017081229
50149: RNCC: 3 | RNVC: 2

15 Mar 2023

3040-01-705-6206
Shouldered Shaft

017056206
845-7286650 ITEM 52: RNCC: 3 | RNVC: 2
2643-859-10 ITEM 52: RNCC: 5 | RNVC: 2

29 Sep 2022

3040-01-710-8279
Counterbalance Weight

017108279
12644564: RNCC: 3 | RNVC: 2
12644564: RNCC: C | RNVC: 1

28 Jun 2023

3040-01-234-3617
Hydraulic Accumulator

012343617
J112210: RNCC: 3 | RNVC: 2
20065-M001: RNCC: 5 | RNVC: 9

13 Jun 1986

3040-01-703-3648
Straight Shaft Assembly

017033648
5-13-10204-3: RNCC: 3 | RNVC: 2
5-13-10204: RNCC: D | RNVC: 9

1 Sep 2022

3040-01-706-8834
Shouldered Shaft

017068834
4C52894-101A: RNCC: 3 | RNVC: 2
4C52894: RNCC: D | RNVC: 9

29 Dec 2022

3040-01-708-2741
Rigid Connecting Link

017082741
1TD13G1H00004-1001: RNCC: 3 | RNVC: 2
22556-1: RNCC: 5 | RNVC: 2

27 Mar 2023

3040-01-708-0569
Intermediate Shaft

017080569
W084834591: RNCC: 3 | RNVC: 2

14 Mar 2023

3040-01-706-7904
Straight Shaft

017067904
06351-08054-105: RNCC: 3 | RNVC: 2
06351-08054: RNCC: D | RNVC: 9

19 Dec 2022

3040-01-708-8680
Nonaircraft Mechanical Actuator

017088680
28357: RNCC: 3 | RNVC: 2
60-28380 ITEM 2: RNCC: C | RNVC: 1
60-28380: RNCC: D | RNVC: 9

27 Apr 2023

3040-01-708-0753
Transom Shield

017080753
22865044: RNCC: 3 | RNVC: 2
402VP22865044: RNCC: 5 | RNVC: 2

14 Mar 2023

3040-01-708-0563
Spline Adapter

017080563
UHK61026-1: RNCC: 3 | RNVC: 2

13 Mar 2023

3040-01-707-5320
Shouldered Shaft

017075320
4C21069-105A: RNCC: 3 | RNVC: 2
4C21069: RNCC: D | RNVC: 9

7 Feb 2023

3040-01-706-9387
Shouldered Shaft

017069387
20463-1050: RNCC: 3 | RNVC: 2
20463-004 ITEM 15: RNCC: 5 | RNVC: 2
20463-004: RNCC: D | RNVC: 9

4 Jan 2023

3040-01-707-1301
Shaft Idler

017071301
GS-5075: RNCC: 3 | RNVC: 2

18 Jan 2023

3040-00-393-3379
Shaft Collar

003933379
1689-4300: RNCC: 3 | RNVC: 2
187786PC242: RNCC: 3 | RNVC: 2
1689-4300: RNCC: 3 | RNVC: 2
7ENN113: RNCC: 3 | RNVC: 2
3229607: RNCC: 3 | RNVC: 2
1689-4300: RNCC: 5 | RNVC: 2
187477PC11-242: RNCC: 5 | RNVC: 2
4300-03F644PC7: RNCC: 5 | RNVC: 2
118928PC11-242: RNCC: 5 | RNVC: 2
FSN113PC7: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-705-9150
Piston Rod Ring

017059150
LG-958-1: RNCC: 3 | RNVC: 2
AW25M10017 / ITEM 33: RNCC: C | RNVC: 1
AW25M10017: RNCC: D | RNVC: 9

21 Oct 2022

3040-01-706-0878
Shaft Retaining Plate

017060878
38-A9089: RNCC: 3 | RNVC: 2
19843-ITEM-3: RNCC: 5 | RNVC: 2
19843 REV C SHEET 1 FIND 3: RNCC: 5 | RNVC: 9
19843: RNCC: D | RNVC: 9

31 Oct 2022

3040-01-706-6708
Shouldered Shaft

017066708
9Y-4939: RNCC: 3 | RNVC: 2

12 Dec 2022

3040-01-212-8736
Shouldered Shaft

012128736
066923078R: RNCC: 3 | RNVC: 2
87251 PIECE 40: RNCC: 5 | RNVC: 9
66923-78-R: RNCC: 5 | RNVC: 9
66923-78-A: RNCC: 5 | RNVC: 9

19 Jul 1985

3040-01-703-3357
Shouldered Shaft

017033357
184816-1: RNCC: 3 | RNVC: 2

30 Aug 2022

3040-00-354-6873
Rigid Connecting Link

003546873
020040651/2-04651: RNCC: 3 | RNVC: 2
CL8557: RNCC: 5 | RNVC: 2
DDE 05 05193421: RNCC: 5 | RNVC: 2
266696R1: RNCC: 5 | RNVC: 9
5193421: RNCC: 5 | RNVC: 9
266696R1: RNCC: 5 | RNVC: 9
P28797: RNCC: 5 | RNVC: 9
P28797: RNCC: 5 | RNVC: 9
266696R1: RNCC: 5 | RNVC: 9
K3301: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-194-0264
Control Cam

011940264
21610147-1: RNCC: 3 | RNVC: 2
21610147: RNCC: 3 | RNVC: 9
21610147: RNCC: 5 | RNVC: 9

9 Nov 1984

3040-01-697-6577
Brake Backing Plate

016976577
452550EMK30-7: RNCC: 3 | RNVC: 1

4 Oct 2021

3040-01-559-6030
Rotary Actuating Cylinder Assembly

015596030
30078A: RNCC: 3 | RNVC: 2
30078A-8613: RNCC: 3 | RNVC: 2
30078-41470: RNCC: 5 | RNVC: 2

26 Dec 2007

3040-01-139-1611
Front Wheel Hub

011391611
A333-T-2334: RNCC: 3 | RNVC: 2
A333-T-2334: RNCC: 5 | RNVC: 2
3040011391611: RNCC: 6 | RNVC: 9

25 Sep 1982

3040-01-128-2463
Mo Control Assembly

011282463
310777-000-00360: RNCC: 3 | RNVC: 2
D300-442-036: RNCC: 5 | RNVC: 2
2230-36: RNCC: 5 | RNVC: 2
D300-442-036: RNCC: 5 | RNVC: 2
D300-442-036: RNCC: 5 | RNVC: 2
D300-442-036: RNCC: 5 | RNVC: 2
D300-442-036: RNCC: 5 | RNVC: 2
D300-442-036: RNCC: 5 | RNVC: 2
67603: RNCC: 5 | RNVC: 2
D300-442-036: RNCC: 5 | RNVC: 9

20 Mar 1982

3040-01-703-0012
Rigid Connecting Link

017030012
347/21538: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-01-702-8716
Shouldered Shaft

017028716
5802328959: RNCC: 3 | RNVC: 2

3 Aug 2022

3040-01-703-1917
Expander Tube Brake

017031917
80620: RNCC: 3 | RNVC: 2
80619 ITEM 1: RNCC: C | RNVC: 1
80619 REV A: RNCC: D | RNVC: 9

22 Aug 2022

3040-01-702-1492
Straight Shaft

017021492
12617853: RNCC: 3 | RNVC: 2

22 Jun 2022

3040-01-702-0636
Bell Crank

017020636
12596575: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-701-0972
Straight Shaft

017010972
113T1217-1: RNCC: 3 | RNVC: 1

26 Apr 2022

3040-01-701-4599
Worm Wheel Gearshaft

017014599
506-30-35: RNCC: 3 | RNVC: 2
241-8592072 REV C SHEET 2 OF 2: RNCC: D | RNVC: 9

17 May 2022

3040-01-700-7108
Nonrotating Shaft Eye Bracket

017007108
314967: RNCC: 3 | RNVC: 2
306815: RNCC: D | RNVC: 9

8 Apr 2022

3040-01-702-7216
Screen Lens

017027216
12424-9-00100: RNCC: 3 | RNVC: 2
12151/ PL/ FN 23: RNCC: 5 | RNVC: 2

22 Jul 2022

3040-01-702-6818
Spline Adapter

017026818
03E-95165-0: RNCC: 3 | RNVC: 2

20 Jul 2022

3040-01-700-7729
Top Hub Assembly

017007729
8677747-001: RNCC: 3 | RNVC: 2

13 Apr 2022

3040-01-702-5791
Linear Actuating Cylinder Piston

017025791
8028-080-4103: RNCC: 3 | RNVC: 2

15 Jul 2022

3040-01-701-1502
Controllable Swashplate

017011502
SB8416-101: RNCC: 3 | RNVC: 2

29 Apr 2022

3040-01-698-7201
Shouldered Shaft

016987201
DSS1048: RNCC: 3 | RNVC: 2

3 Dec 2021

3040-01-699-3750
Remote Control Lever

016993750
4219676: RNCC: 3 | RNVC: 2

26 Jan 2022

3040-01-700-8918
Shouldered Shaft

017008918
2007659-11: RNCC: 3 | RNVC: 2

19 Apr 2022

3040-01-697-9988
Nonaircraft Mechanical Actuator

016979988
95462A505: RNCC: 3 | RNVC: 2

22 Oct 2021

3040-01-698-3889
Worm Wheel Gearshaft

016983889
50500-0195/50135-0221: RNCC: 3 | RNVC: 2

15 Nov 2021

3040-01-697-9837
Control Cam

016979837
16 404 634: RNCC: 3 | RNVC: 1
FIG 7-59-18: RNCC: D | RNVC: 9

21 Oct 2021

3040-01-702-2927
Shouldered Shaft

017022927
5-15-36045: RNCC: 3 | RNVC: 2

27 Jun 2022

3040-01-700-0482
Mechanical Drive Housing

017000482
8M0142338: RNCC: 3 | RNVC: 2

14 Mar 2022

3040-01-701-5867
Straight Shaft

017015867
P3860-403C: RNCC: 3 | RNVC: 2
P3860-005C/ITEM 1: RNCC: D | RNVC: 9

24 May 2022

3040-01-699-0825
Manual Control Lever

016990825
725-8838197-A2: RNCC: 3 | RNVC: 2
LOA007265-A2: RNCC: 5 | RNVC: 1

6 Jan 2022

3040-01-697-9235
Shouldered Shaft

016979235
226-7480: RNCC: 3 | RNVC: 2

19 Oct 2021

3040-01-699-0664
Remote Control Lever

016990664
725-8838998-A10: RNCC: 3 | RNVC: 2
LOA007264-A10: RNCC: 5 | RNVC: 2

5 Jan 2022

3040-01-697-8761
Manual Control Lever

016978761
226-2751: RNCC: 3 | RNVC: 2

15 Oct 2021

3040-01-702-1717
Pawl

017021717
12618007: RNCC: 3 | RNVC: 2

22 Jun 2022

3040-01-706-5656
Helical Gear And Shaft Assembly

017065656
101-3374: RNCC: 3 | RNVC: 2

6 Dec 2022

3040-01-706-4255
Straight Shaft

017064255
161-0070: RNCC: 3 | RNVC: 2

23 Nov 2022

3040-01-706-5220
Straight Shaft

017065220
560-0201: RNCC: 3 | RNVC: 2

2 Dec 2022

3040-01-706-5579
Pawl

017065579
350A25-1284-20: RNCC: 3 | RNVC: 2

6 Dec 2022

3040-01-706-8384
Ball Joint

017068384
ASCEND-14-BHQC: RNCC: 3 | RNVC: 2

22 Dec 2022

3040-01-706-6094
Linear Actuating Cylinder

017066094
26683018: RNCC: 3 | RNVC: 2
69.65706-0006: RNCC: 5 | RNVC: 2
69.65706-0006: RNCC: 5 | RNVC: 2

8 Dec 2022

3040-01-706-2792
Tension Spring Assembly

017062792
600456: RNCC: 3 | RNVC: 2

14 Nov 2022

3040-01-543-3378
Straight Shaft

015433378
9G0289: RNCC: 3 | RNVC: 2
9G-0289: RNCC: 5 | RNVC: 2

8 Sep 2006

3040-01-561-6446
Shouldered Shaft

015616446
00-913102-00341: RNCC: 3 | RNVC: 2
00-916458: RNCC: 3 | RNVC: 9
00-916458: RNCC: 5 | RNVC: 2

13 Mar 2008

3040-01-705-5976
Counterbalance Weight

017055976
1644M82P04: RNCC: 3 | RNVC: 2

28 Sep 2022

3040-01-705-9967
Shouldered Shaft

017059967
7490 5161 15: RNCC: 3 | RNVC: 2

24 Oct 2022

3040-01-703-0230
Planetary Gears Carrier

017030230
29535993: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-01-703-0169
Shouldered Shaft

017030169
29507874: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-01-601-9790
Housing Adapter

016019790
3P6308: RNCC: 3 | RNVC: 2
3P-6308: RNCC: 5 | RNVC: 2

26 Jan 2012

3040-01-550-5630
Linear Actuating Cylinder Assembly

015505630
9239762734: RNCC: 3 | RNVC: 2
MP-0001570G: RNCC: 3 | RNVC: 2
CV185418: RNCC: 5 | RNVC: 2
923976.2734: RNCC: 5 | RNVC: 2
923976.2734: RNCC: 5 | RNVC: 2

24 Apr 2007

3040-01-550-5633
Linear Actuating Cylinder Assembly

015505633
9239762735: RNCC: 3 | RNVC: 2
MP-0002717G: RNCC: 3 | RNVC: 2
CV185417: RNCC: 5 | RNVC: 2
923976.2735: RNCC: 5 | RNVC: 2
923976.2735: RNCC: 5 | RNVC: 2

24 Apr 2007

3040-01-707-5529
Extension Shaft

017075529
1047104: RNCC: 3 | RNVC: 2

8 Feb 2023

3040-01-707-4764
Lever Fitting

017074764
1025394: RNCC: 3 | RNVC: 2

3 Feb 2023

3040-01-707-5161
Rigid Connecting Link

017075161
74680-1: RNCC: 3 | RNVC: 2

7 Feb 2023

3040-01-707-5471
Linear Actuating Cylinder

017075471
109-8833: RNCC: 3 | RNVC: 2

8 Feb 2023

3040-01-479-4854
Linear Actuating Cylinder Piston

014794854
CB29099-001: RNCC: 3 | RNVC: 2
30096-41450 ITEM 12: RNCC: 5 | RNVC: 2
30078-41470 ITEM 12: RNCC: 5 | RNVC: 2
CC79493-001: RNCC: 5 | RNVC: 2
41462: RNCC: 5 | RNVC: 9
30078-41470: RNCC: D | RNVC: 9
30096-41450: RNCC: D | RNVC: 9

23 Oct 2000

3040-01-706-6387
Remote Control Lever

017066387
7C-8566: RNCC: 3 | RNVC: 2

9 Dec 2022

3040-01-707-7110
Shouldered Shaft

017077110
114S1849-2: RNCC: 3 | RNVC: 2

17 Feb 2023

3040-01-706-6752
Cylinder Support

017066752
576-9690: RNCC: 3 | RNVC: 2

12 Dec 2022

3040-01-706-4060
Shaft Idler

017064060
149-0563: RNCC: 3 | RNVC: 2

22 Nov 2022

3040-01-706-4207
Linear Actuating Cylinder Piston

017064207
HL3002: RNCC: 3 | RNVC: 2

22 Nov 2022

3040-01-697-7137
Mechanical Drive Housing

016977137
1K280: RNCC: 3 | RNVC: 2

6 Oct 2021

3040-01-707-1666
Mechanical Drive Housing Part

017071666
600235: RNCC: 3 | RNVC: 2

20 Jan 2023

3040-01-182-6971
Rigid Connecting Link

011826971
SR10784A-6019: RNCC: 3 | RNVC: 2
7514-6019: RNCC: 3 | RNVC: 2
KSL 125700BX-6019: RNCC: 5 | RNVC: 2
7014-125: RNCC: 5 | RNVC: 9
LE162-0002-6019: RNCC: 7 | RNVC: 2

27 Jun 1984

3040-01-705-9148
Bevel Gearshaft

017059148
3235063: RNCC: 3 | RNVC: 2

21 Oct 2022

3040-01-707-7531
Ball Joint

017077531
7061220: RNCC: 3 | RNVC: 2

21 Feb 2023

3040-00-518-6309
Shouldered Shaft

005186309
5186309: RNCC: 3 | RNVC: 2
1015005186309: RNCC: 5 | RNVC: 9
110524: RNCC: 5 | RNVC: 9
3040005186309: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-01-582-3150
Manual Control Lever Assembly

015823150
C2-33-35: RNCC: 3 | RNVC: 2
SW3DPS-C2-33-35: RNCC: 5 | RNVC: 9

16 Feb 2010

3040-01-700-4946
Rigid Connecting Link

017004946
23080252: RNCC: 3 | RNVC: 2

30 Mar 2022

3040-01-710-6061
Counterbalance Weight

017106061
23087713-6: RNCC: 3 | RNVC: 2

9 Jun 2023

3040-01-707-9146
Straight Axle

017079146
206-011-125-001: RNCC: 3 | RNVC: 2

3 Mar 2023

3040-01-706-6384
Shouldered Shaft

017066384
7E-7061: RNCC: 3 | RNVC: 2

9 Dec 2022

3040-01-707-1723
Counterbalance Weight

017071723
SLS-011-191-001: RNCC: 3 | RNVC: 2

20 Jan 2023

3040-01-706-4948
Rigid Connecting Link

017064948
4P-3135: RNCC: 3 | RNVC: 2

30 Nov 2022

3040-01-706-4279
Straight Shaft

017064279
161-0071: RNCC: 3 | RNVC: 2

23 Nov 2022

3040-01-709-1645
Linear Actuating Cylinder

017091645
CC99699-001: RNCC: 3 | RNVC: 2
CC73592-6: RNCC: 5 | RNVC: 2
CC73592/SHEET 1 ITEM 6: RNCC: C | RNVC: 1
CC73592: RNCC: D | RNVC: 9

15 May 2023

3040-01-708-4371
Rigid Connecting Link

017084371
SLS-010-220-102: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-708-7300
Nonaircraft Mechanical Actuator

017087300
SE 70002-3: RNCC: 3 | RNVC: 2
7519432-3: RNCC: 5 | RNVC: 2
0SE70002-3: RNCC: D | RNVC: 9
7519432 REV F: RNCC: D | RNVC: 9

19 Apr 2023

3040-01-705-5138
Shouldered Shaft

017055138
37032: RNCC: 3 | RNVC: 2
37032: RNCC: 5 | RNVC: 9

23 Sep 2022

3040-01-705-6048
Counterbalance Weight

017056048
1639M67P03: RNCC: 3 | RNVC: 2

28 Sep 2022

3040-01-709-1149
Shouldered Shaft

017091149
00-971868: RNCC: 3 | RNVC: 2

11 May 2023

3040-01-710-6382
Piston Ring

017106382
00-997696: RNCC: 3 | RNVC: 2

12 Jun 2023

3040-01-708-4366
Rigid Connecting Link

017084366
SLS-010-220-101: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-708-4235
Rigid Connecting Link

017084235
SLS-060-104-001: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-546-7930
Shaftzshoulderedzzz

015467930
7550477-264234303-1: RNCC: 3 | RNVC: 2
4558718-0001: RNCC: 5 | RNVC: 1
G547-0001-264234303-1: RNCC: 5 | RNVC: 1
2642-343-03 ITEM 1: RNCC: 5 | RNVC: 1
264234303-1: RNCC: 5 | RNVC: 1
845-4558718 ITEM 1: RNCC: 5 | RNVC: 1
2642-343-03 ITEM 1D4: RNCC: 5 | RNVC: 2
4558718-0001D4: RNCC: 5 | RNVC: 2
264234303-1D4: RNCC: 5 | RNVC: 2
845-4558718 ITEM 1D4: RNCC: 5 | RNVC: 2

3 Jan 2007

3040-01-702-9321
Push-Pull Control Assembly

017029321
60178-170-03: RNCC: 3 | RNVC: 2
PL 60178-100-02: RNCC: 5 | RNVC: 2

8 Aug 2022

3040-01-702-8134
Spline Adapter

017028134
187117-1: RNCC: 3 | RNVC: 2

30 Jul 2022

3040-01-703-3961
Hub

017033961
LG-955-A: RNCC: 3 | RNVC: 2
1806700011 REV 02 ITEM 8: RNCC: 5 | RNVC: 2
A816700011 REV 03 ITEM 8: RNCC: D | RNVC: 9

2 Sep 2022

3040-01-067-3856
Manual Control Lever

010673856
520252: RNCC: 3 | RNVC: 2
24047: RNCC: 5 | RNVC: 9
507710: RNCC: 5 | RNVC: 9
507710: RNCC: 5 | RNVC: 9

29 Oct 1978

3040-01-231-6955
Spur Gearshaft

012316955
0435020: RNCC: 3 | RNVC: 2
0435020: RNCC: 3 | RNVC: 9
5004938: RNCC: 5 | RNVC: 2
435020: RNCC: 5 | RNVC: 9
5004216: RNCC: 5 | RNVC: 9
391289: RNCC: 5 | RNVC: 9
5004216: RNCC: 5 | RNVC: 9
434026: RNCC: 5 | RNVC: 9
435020: RNCC: 5 | RNVC: 9
391289: RNCC: 5 | RNVC: 9

2 May 1986

3040-01-568-7992
Linear Actuating Cylinder Assembly

015687992
604-9020: RNCC: 3 | RNVC: 2
210-7082: RNCC: 5 | RNVC: 9

10 Nov 2008

3040-01-184-8912
Rigid Connecting Link

011848912
7514-6020: RNCC: 3 | RNVC: 2
SR10784A-6020: RNCC: 5 | RNVC: 2
KSL125700BX6020: RNCC: 5 | RNVC: 2
LE162-0002-6020: RNCC: 7 | RNVC: 2

24 Jul 1984

3040-01-181-0999
Remote Control Lever

011810999
9M7394: RNCC: 3 | RNVC: 2
9M7394: RNCC: 5 | RNVC: 2
9M-7394: RNCC: 5 | RNVC: 2

6 Jun 1984

3040-01-170-6754
Ball Joint

011706754
21844002-013: RNCC: 3 | RNVC: 2
90930-991: RNCC: 3 | RNVC: 9
21844002-013: RNCC: 5 | RNVC: 2
2184 4002-013: RNCC: 5 | RNVC: 2
21844002-013: RNCC: 5 | RNVC: 9
90930-991: RNCC: 5 | RNVC: 9
90930-991: RNCC: 5 | RNVC: 9

27 Jan 1984

3040-01-477-3197
Nonaircraft Mechanical Actuator

014773197
Y008557125K1: RNCC: 3 | RNVC: 2
Y008557125 WITH N24299: RNCC: 3 | RNVC: 9
18356N 85 WITH H.O.D.: RNCC: 5 | RNVC: 9
34362N 85 WITH H.O.D.: RNCC: 5 | RNVC: 9
85 WITH H.O.D.: RNCC: 5 | RNVC: 9
85HOD/CD34362N: RNCC: C | RNVC: 1
34362N: RNCC: D | RNVC: 9
18356N: RNCC: D | RNVC: 9

7 Aug 2000

3040-01-702-1165
Rigid Connecting Link

017021165
96350-09: RNCC: 3 | RNVC: 2
49-12-01 REV 0: RNCC: D | RNVC: 9
49-12-01 FIG 4: RNCC: D | RNVC: 9

22 Jun 2022

3040-01-183-2343
Straight Shaft

011832343
A2-17: RNCC: 3 | RNVC: 2
G3-14: RNCC: 3 | RNVC: 2
SS64: RNCC: 3 | RNVC: 2
GS-06: RNCC: 3 | RNVC: 2
7X1-06-017: RNCC: 3 | RNVC: 2
SCD10300: RNCC: 5 | RNVC: 2
120376-007: RNCC: 5 | RNVC: 2
S3-17: RNCC: 5 | RNVC: 9
644: RNCC: 5 | RNVC: 9
AAS-A3-7: RNCC: 5 | RNVC: 9

4 Jul 1984

3040-00-246-4530
Rigid Connecting Link

002464530
206-001-123-5: RNCC: 3 | RNVC: 2
206-001-123-005: RNCC: 5 | RNVC: 2

26 Feb 1969

3040-01-585-2627
Manual Control Lever Assembly

015852627
6V7190: RNCC: 3 | RNVC: 2
6V-7190: RNCC: 5 | RNVC: 2

20 May 2010

3040-01-502-9271
Transmission Fluid Cooler

015029271
314760-902: RNCC: 3 | RNVC: 2
12386405: RNCC: 3 | RNVC: 2
2886: RNCC: 5 | RNVC: 9
10474907: RNCC: 6 | RNVC: 9

25 Nov 2002

3040-01-698-2664
Brake Disc

016982664
7029735: RNCC: 3 | RNVC: 2
7029735: RNCC: 3 | RNVC: 9

5 Nov 2021

3040-01-698-1506
Straight Shaft

016981506
197K2712-5: RNCC: 3 | RNVC: 2
197K2712-5: RNCC: 5 | RNVC: 9

1 Nov 2021

3040-01-697-8173
Brake Backing Plate

016978173
HC3Z-4831-B: RNCC: 3 | RNVC: 2
HC3Z-4831-B: RNCC: 3 | RNVC: 9

13 Oct 2021

3040-01-698-0636
Straight Shaft

016980636
526188-1: RNCC: 3 | RNVC: 2

27 Oct 2021

3040-01-697-8180
Brake Backing Plate

016978180
DC3Z-2B582-A: RNCC: 3 | RNVC: 2
DC3Z-2B582-A: RNCC: 3 | RNVC: 9

13 Oct 2021

3040-01-698-5297
Linear Actuating Cylinder Cap

016985297
001390-000PC12: RNCC: 3 | RNVC: 2
B-0595-032257-000: RNCC: 3 | RNVC: 2

22 Nov 2021

3040-01-187-2977
Rigid Connecting Link

011872977
7514-6018: RNCC: 3 | RNVC: 2
SR10784A-6018: RNCC: 5 | RNVC: 2
125700BX-6018: RNCC: 5 | RNVC: 2
KSL125700BX-6018: RNCC: 5 | RNVC: 2
LE162-0002-6018: RNCC: 7 | RNVC: 2

21 Aug 1984

3040-01-700-7573
Nonaircraft Mechanical Actuator

017007573
HD24B045-1000EXX1EESD: RNCC: 3 | RNVC: 2
HD24B045-1000EXX1EES: RNCC: 5 | RNVC: 9

12 Apr 2022

3040-01-392-8861
Breather

013928861
A-15347: RNCC: 3 | RNVC: 2
52B9243-1: RNCC: 3 | RNVC: 2
52B9243-1: RNCC: 5 | RNVC: 2
303186: RNCC: 5 | RNVC: 2

11 Jul 1994

3040-01-693-1348
Multiple Gears Gearshaft

016931348
8000-0364: RNCC: 3 | RNVC: 2
8592276-001: RNCC: 3 | RNVC: 9
311-8592276: RNCC: D | RNVC: 9

27 Jan 2021

3040-01-648-6932
Control Cable Assembly

016486932
CC34310: RNCC: 3 | RNVC: 2
307060: RNCC: 5 | RNVC: 2
000-33072-0375: RNCC: 5 | RNVC: 2
000-33072-0325: RNCC: 5 | RNVC: 2
307060: RNCC: 5 | RNVC: 9

2 Oct 2015

3040-01-707-5498
Linear Actuating Cylinder

017075498
380-5284: RNCC: 3 | RNVC: 2

8 Feb 2023

3040-01-706-6893
Spur Gearshaft

017066893
7W-2401: RNCC: 3 | RNVC: 2

13 Dec 2022

3040-01-706-8220
Rigid Connecting Link

017068220
437-4030: RNCC: 3 | RNVC: 2

21 Dec 2022

3040-01-706-9212
Control Cam

017069212
16104410: RNCC: 3 | RNVC: 2

3 Jan 2023

3040-01-706-5031
Shaft Retaining Plate

017065031
4P-0294: RNCC: 3 | RNVC: 2

1 Dec 2022

3040-01-706-2034
Shouldered Shaft Assembly

017062034
125329B7: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-698-8263
Nonrotating Shaft Eye Bracket

016988263
HC3Z-1104-F: RNCC: 3 | RNVC: 2

13 Dec 2021

3040-01-703-2135
Straight Shaft

017032135
3031879-001: RNCC: 3 | RNVC: 2

23 Aug 2022

3040-01-702-9017
Mechanical Drive Housing

017029017
3867AS1021-3: RNCC: 3 | RNVC: 2
3867AS1021: RNCC: D | RNVC: 9

4 Aug 2022

3040-01-702-5925
Shouldered Shaft

017025925
187244-1: RNCC: 3 | RNVC: 2

16 Jul 2022

3040-01-554-2453
Linear Actuating Cylinder Assembly

015542453
AHC18997: RNCC: 3 | RNVC: 2
AHC17123: RNCC: 5 | RNVC: 2
AHC17123: RNCC: 5 | RNVC: 2
AHC17123: RNCC: 5 | RNVC: 9
AHC17123: RNCC: 5 | RNVC: 9
AH208631: RNCC: 5 | RNVC: 9
AH208631: RNCC: 5 | RNVC: 9
AHC17123: RNCC: 5 | RNVC: 9
AHC17123: RNCC: 5 | RNVC: 9

2 Aug 2007

3040-01-702-2483
Flexible Shaft Assembly Core

017022483
341B11220PF2230-205: RNCC: 3 | RNVC: 2

23 Jun 2022

3040-01-195-6125
Governor Valve Adapter

011956125
106048: RNCC: 3 | RNVC: 2
900005: RNCC: 3 | RNVC: 2
106035: RNCC: 3 | RNVC: 2
106035: RNCC: 5 | RNVC: 2
106035: RNCC: 5 | RNVC: 9
106048: RNCC: 5 | RNVC: 9
106035: RNCC: 5 | RNVC: 9
106048: RNCC: 5 | RNVC: 9
106035: RNCC: 5 | RNVC: 9
106048: RNCC: 5 | RNVC: 9

30 Nov 1984

3040-01-493-6858
Straight Shaft

014936858
387 4933-001: RNCC: 3 | RNVC: 9
387 9433-001: RNCC: 5 | RNVC: 2
387 9433-001: RNCC: 5 | RNVC: 2
387 4933-001: RNCC: 5 | RNVC: 9
387 4933-001: RNCC: 5 | RNVC: 9
387 4933-001 TA: RNCC: C | RNVC: 1

15 Jan 2002

3040-01-703-3637
Straight Shaft Assembly

017033637
5-13-10202-2: RNCC: 3 | RNVC: 2
5-13-10202: RNCC: D | RNVC: 9

1 Sep 2022

3040-01-704-3603
Straight Shaft Assembly

017043603
5-13-10203-3: RNCC: 3 | RNVC: 2
5-13-10203-3: RNCC: 5 | RNVC: 2
5-13-10203: RNCC: D | RNVC: 9

9 Sep 2022

3040-01-703-2950
Straight Shaft

017032950
717405174-001: RNCC: 3 | RNVC: 2
717405174: RNCC: D | RNVC: 9

27 Aug 2022

3040-01-189-1198
Rotating Shaft Eye Bracket

011891198
5-45-3310: RNCC: 3 | RNVC: 2
C5-45-3310: RNCC: 5 | RNVC: 9

11 Sep 1984

3040-01-680-6871
Rigid Connecting Link

016806871
2733732: RNCC: 3 | RNVC: 2
2741586: RNCC: 5 | RNVC: 9
2733732: RNCC: 5 | RNVC: 9

16 May 2019

3040-01-705-3892
Straight Shaft

017053892
72246: RNCC: 3 | RNVC: 2

19 Sep 2022

3040-01-704-3937
Straight Shaft Assembly

017043937
5-13-10203-2: RNCC: 3 | RNVC: 2
5-13-10203-2: RNCC: 5 | RNVC: 2
5-13-10203: RNCC: D | RNVC: 9

9 Sep 2022

3040-01-677-3780
Rigid Connecting Link

016773780
8592250-001: RNCC: 3 | RNVC: 2
561-8592250 FN 2: RNCC: 5 | RNVC: 2
8592750-001: RNCC: 5 | RNVC: 9

11 Dec 2018

3040-01-703-1891
Mechanical Drive Housing

017031891
415848-1: RNCC: 3 | RNVC: 2
415848: RNCC: D | RNVC: 9

22 Aug 2022

3040-01-140-0781
Straight Shaft

011400781
12012176: RNCC: 3 | RNVC: 2
P-ZLAB-0000524: RNCC: 5 | RNVC: 2
12012176: RNCC: 5 | RNVC: 2

7 Oct 1982

3040-01-433-2597
Linear Actuating Cylinder Assembly

014332597
1H2H0A00348949: RNCC: 3 | RNVC: 2
FG209302A0: RNCC: 3 | RNVC: 9
2.50CBB-2HLTVS14 X 78.00: RNCC: 5 | RNVC: 9

25 Jun 1996

3040-01-700-8018
Housing Adapter

017008018
5802076651: RNCC: 3 | RNVC: 2

14 Apr 2022

3040-01-700-8211
Straight Shaft

017008211
595-8544603-PN-10: RNCC: 3 | RNVC: 2
H684-8001-PN-10: RNCC: 5 | RNVC: 2
8544603: RNCC: 5 | RNVC: 2

15 Apr 2022

3040-01-700-6428
Spur Gearshaft

017006428
06351-08268-103: RNCC: 3 | RNVC: 2

5 Apr 2022

3040-01-699-6936
Straight Shaft

016996936
22405-01: RNCC: 1 | RNVC: 2
22405-01: RNCC: 3 | RNVC: 2

18 Feb 2022

3040-01-701-8230
Shouldered Shaft

017018230
B19157-1: RNCC: 3 | RNVC: 2

10 Jun 2022

3040-01-701-9511
Counterbalance Weight

017019511
6539582: RNCC: 3 | RNVC: 2

17 Jun 2022

3040-01-699-3965
Control Cam

016993965
47739-4: RNCC: 3 | RNVC: 2
5075 SHT 9 IT NO 9: RNCC: C | RNVC: 1
5075/REV C SHEET 9 FIND NO 9: RNCC: C | RNVC: 1

27 Jan 2022

3040-01-699-4165
Linear Actuating Cylinder Cap

016994165
CC49810-001: RNCC: 3 | RNVC: 2
CC49816-ITEM NO-7: RNCC: D | RNVC: 9

28 Jan 2022

3040-01-698-8748
Bell Crank Support

016988748
06208-02106-069: RNCC: 3 | RNVC: 2

16 Dec 2021

3040-01-702-4167
Linear Actuating Cylinder Piston

017024167
01135793: RNCC: 3 | RNVC: 2

5 Jul 2022

3040-01-701-0090
Hydraulic Accumulator Cylinder

017010090
71881800: RNCC: 3 | RNVC: 2
P009852 ITEM NO 2: RNCC: C | RNVC: 1
P010195: RNCC: D | RNVC: 9

22 Apr 2022

3040-01-701-0688
Lever Fitting

017010688
2007653-1: RNCC: 3 | RNVC: 2
2007653: RNCC: D | RNVC: 9

26 Apr 2022

3040-01-700-9609
Shouldered Shaft Assembly

017009609
8600117-03-001: RNCC: 3 | RNVC: 2
8600117-03/SHEET 1: RNCC: D | RNVC: 9

21 Apr 2022

3040-01-702-1497
Shaft Idler

017021497
4349010: RNCC: 3 | RNVC: 2

22 Jun 2022

3040-01-698-7229
Nonaircraft Mechanical Actuator

016987229
42442: RNCC: 3 | RNVC: 2
D-WK-879-3 / REV N PC 9 NOTE 11: RNCC: D | RNVC: 9
42442/ REV A: RNCC: D | RNVC: 9

3 Dec 2021

3040-01-702-3791
Helical Gearshaft

017023791
187123-1: RNCC: 3 | RNVC: 2

30 Jun 2022

3040-01-699-9088
In Pinion Assembly

016999088
06351-08260-042: RNCC: 3 | RNVC: 2

6 Mar 2022

3040-01-701-5695
Manual Control Lever Assembly

017015695
12582022: RNCC: 3 | RNVC: 2

24 May 2022

3040-01-698-5659
Actuator Rod

016985659
2238-5-66: RNCC: 3 | RNVC: 2
2238-5 ITEM NO 66: RNCC: 5 | RNVC: 1

24 Nov 2021

3040-01-699-9621
Detent Plate

016999621
5-13-10478-1: RNCC: 3 | RNVC: 2
5-13-10478: RNCC: 7 | RNVC: 2

8 Mar 2022

3040-01-699-8738
Straight Shaft

016998738
213747-00: RNCC: 3 | RNVC: 2

3 Mar 2022

3040-01-699-9085
Main Rotor Shaft

016999085
06351-08110-043: RNCC: 3 | RNVC: 2

6 Mar 2022

3040-01-710-6058
Counterbalance Weight

017106058
23087713-4: RNCC: 3 | RNVC: 2

9 Jun 2023

3040-01-710-6383
Piston Ring

017106383
00-997697: RNCC: 3 | RNVC: 2

12 Jun 2023

3040-01-708-7286
Straight Shaft

017087286
412-040-620-103FM: RNCC: 3 | RNVC: 2

19 Apr 2023

3040-01-710-5845
Rigid Connecting Link

017105845
752-7068433-PN-263: RNCC: 3 | RNVC: 2
H832-0399-PN-263: RNCC: 5 | RNVC: 2
752-7068433: RNCC: D | RNVC: 9

8 Jun 2023

3040-01-710-6165
Nonaircraft Mechanical Actuator

017106165
0511/15-S793-100: RNCC: 3 | RNVC: 2
OPC0511: RNCC: D | RNVC: 9

12 Jun 2023

3040-01-708-5057
Spur Gearshaft

017085057
406-040-028-101: RNCC: 3 | RNVC: 2

11 Apr 2023

3040-01-281-1101
Linear Actuating Cylinder Assembly

012811101
1H2H0A00070694: RNCC: 3 | RNVC: 2
GG112762A0: RNCC: 5 | RNVC: 9
2.00CBB-2HLTS14ACX18.500: RNCC: 5 | RNVC: 9
AG160854A0: RNCC: 5 | RNVC: 9

17 Jun 1988

3040-01-475-7149
Linear Actuating Cylinder Piston Rod

014757149
CC92854-001: RNCC: 3 | RNVC: 2
41137: RNCC: 3 | RNVC: 9
CC89964 IT 2: RNCC: 5 | RNVC: 2
LA95-41135 ITEM 2: RNCC: 5 | RNVC: 9

12 Jun 2000

3040-01-710-6763
Extension Shaft

017106763
113247006: RNCC: 3 | RNVC: 2

15 Jun 2023

3040-01-710-6032
Nonaircraft Mechanical Actuator

017106032
0511/15-S793-143: RNCC: 3 | RNVC: 2
OPC0511: RNCC: D | RNVC: 9

9 Jun 2023

3040-01-415-1700
Straight Shaft

014151700
CF646176: RNCC: 3 | RNVC: 2
646176: RNCC: 3 | RNVC: 9
643689: RNCC: 5 | RNVC: 9

21 Jun 1995

3040-01-189-4715
Linear Actuating Cylinder Cap

011894715
27191X01-001: RNCC: 3 | RNVC: 2
27191: RNCC: 5 | RNVC: 9
14-27030 ITEM 5: RNCC: 5 | RNVC: 9
14-27030: RNCC: D | RNVC: 9

15 Sep 1984

3040-01-588-0939
Shouldered Shaft

015880939
GS2AE8: RNCC: 3 | RNVC: 2
GS1AE8: RNCC: 3 | RNVC: 9

1 Sep 2010

3040-01-546-0716
Linear Actuating Cylinder Assembly

015460716
9241490001: RNCC: 3 | RNVC: 2
MP-0002720G: RNCC: 3 | RNVC: 2
924149.0001: RNCC: 5 | RNVC: 2
CV185419: RNCC: 5 | RNVC: 2
924149.0001: RNCC: 5 | RNVC: 2

5 Dec 2006

3040-01-161-1264
Shouldered Shaft

011611264
402-04-50-0064-0C2N: RNCC: 3 | RNVC: 9
2620-926X10: RNCC: 5 | RNVC: 2
SS845-2110229 PIECE 17-5IN: RNCC: 5 | RNVC: 9
2620-926X10PC17 5 IN: RNCC: 5 | RNVC: 9
2620-926X10 PIECE 16-17-5- IN: RNCC: 5 | RNVC: 9
SS845-2110229 PIECE 16-17-5-IN: RNCC: 5 | RNVC: 9
55845-2110229: RNCC: 5 | RNVC: 9
2620-926X10PC17 5 IN: RNCC: 5 | RNVC: 9
402-35-50-0054-0C2N: RNCC: 5 | RNVC: 9
SS845-2110229 PC 16 AN 17-5IN: RNCC: 5 | RNVC: 9

1 Sep 1983

3040-01-501-8589
Linear Actuating Cylinder Assembly

015018589
861659A 1: RNCC: 3 | RNVC: 2
861659T 1: RNCC: 3 | RNVC: 9

18 Oct 2002

3040-00-394-8447
Turbine Shaft

003948447
4953: RNCC: 3 | RNVC: 2
4953: RNCC: 5 | RNVC: 9
4953: RNCC: 5 | RNVC: 9
4953: RNCC: 5 | RNVC: 9
4953: RNCC: 5 | RNVC: 9
D15-664APC527T0531-574: RNCC: 5 | RNVC: 9
D15-664-0PC527T0531-574: RNCC: 5 | RNVC: 9
D15-664FPC574T0577: RNCC: 5 | RNVC: 9
D15-664EPC527T0531-574: RNCC: 5 | RNVC: 9
D15-664MPC527T0531-574: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-420-2009
Positioning Shoe

004202009
S805ED: RNCC: 3 | RNVC: 2
SG1968PC33: RNCC: 5 | RNVC: 9
SG1976PC33: RNCC: 5 | RNVC: 9
SG2042PC33: RNCC: 5 | RNVC: 9
SG1809PC33: RNCC: 5 | RNVC: 9
SG1749PC33: RNCC: 5 | RNVC: 9
SG1973PC33: RNCC: 5 | RNVC: 9
SG2039PC33: RNCC: 5 | RNVC: 9
SG2089PC33: RNCC: 5 | RNVC: 9
SG1728PC33: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-6780
Helical Gearshaft

007346780
62-8-40: RNCC: 3 | RNVC: 2
1001Z767: RNCC: 5 | RNVC: 2
62-8-40: RNCC: 5 | RNVC: 2
SQAP7346780: RNCC: 5 | RNVC: 2
495200C1: RNCC: 5 | RNVC: 2
7346780: RNCC: 5 | RNVC: 2
100077R1: RNCC: 5 | RNVC: 9
T406-18: RNCC: 5 | RNVC: 9
316679: RNCC: 5 | RNVC: 9
100077R1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-495-9385
Shaftzshoulderedzzz

014959385
7383858-H5471721-060: RNCC: 3 | RNVC: 1
167-7108111-60: RNCC: 5 | RNVC: 1
H547-0001-H5471721-060: RNCC: 5 | RNVC: 1
H547-1721-60: RNCC: 5 | RNVC: 1
7383858-7108111-60L1: RNCC: 5 | RNVC: 1
H5470001-H5471721-60: RNCC: 5 | RNVC: 1
167-7108111-60L1: RNCC: 5 | RNVC: 2
7383858-H5471721-060L1: RNCC: 5 | RNVC: 2
H547-0001-H5471721-060L1: RNCC: 5 | RNVC: 2
H547-1721-60L1: RNCC: 5 | RNVC: 2

28 Mar 2002

3040-01-703-0163
Mechanical Drive Housing

017030163
29549763: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-01-276-2851
Ball Joint

012762851
23-7003-00: RNCC: 3 | RNVC: 2
23-7000-00: RNCC: 5 | RNVC: 2

6 Apr 1988

3040-01-141-4011
Pump Shaft

011414011
737228: RNCC: 3 | RNVC: 2
NF7055-507: RNCC: 3 | RNVC: 2
NF-7055 PC 507: RNCC: 5 | RNVC: 2
507NF-7055: RNCC: 5 | RNVC: 9
NH-7034 PC 507: RNCC: 5 | RNVC: 9
737228: RNCC: 5 | RNVC: 9
NF-7055 PC 507: RNCC: 5 | RNVC: 9
NF-7055 PC 507: RNCC: 5 | RNVC: 9
737228: RNCC: 5 | RNVC: 9
507NF-7055: RNCC: 5 | RNVC: 9

28 Oct 1982

3040-00-337-1018
Helical Gearshaft

003371018
355154: RNCC: 3 | RNVC: 2
800520PC58: RNCC: 5 | RNVC: 2
800524PC58: RNCC: 5 | RNVC: 2
800503PC58: RNCC: 5 | RNVC: 2
801068PC58: RNCC: 5 | RNVC: 2
6887: RNCC: 5 | RNVC: 2
LST1S4200-253054: RNCC: 5 | RNVC: 2
LST1S4200-253067: RNCC: 5 | RNVC: 2
LST511S4200-2554: RNCC: 5 | RNVC: 2
801069PC58: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-475-1231
Linear Actuating Cylinder Assembly

014751231
3798328-1: RNCC: 3 | RNVC: 2
751-6402404 ITEM15: RNCC: 5 | RNVC: 2
751-6402405 ITEM15: RNCC: 5 | RNVC: 2
751-6402405-15: RNCC: 5 | RNVC: 2
751-6402406 FIND15: RNCC: 5 | RNVC: 2
751-6402406 ITEM15: RNCC: 5 | RNVC: 2
751-6402406-15: RNCC: 5 | RNVC: 2
751-6402407 FIND15: RNCC: 5 | RNVC: 2
751-6402407 ITEM15: RNCC: 5 | RNVC: 2
751-6402407-15: RNCC: 5 | RNVC: 2

23 May 2000

3040-01-701-4126
Straight Shaft

017014126
251T0101-503: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-701-4131
Straight Shaft

017014131
251T0100-504: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-699-8311
Breather

016998311
1700291257: RNCC: 3 | RNVC: 2

1 Mar 2022

3040-00-388-0944
Steam Turbine Shaft

003880944
KMC-SG3709-114: RNCC: 3 | RNVC: 2
11319: RNCC: 3 | RNVC: 2
S2819JA: RNCC: 3 | RNVC: 2
SG2956PC107: RNCC: 5 | RNVC: 2
SG2802PC111: RNCC: 5 | RNVC: 2
SG3709PC114: RNCC: 5 | RNVC: 2
G9695PC110: RNCC: 5 | RNVC: 2
G9696PC107: RNCC: 5 | RNVC: 2
SG2881APC78: RNCC: 5 | RNVC: 2
SG3973PC110: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-3822
Spur Gearshaft

016993822
3030678-001: RNCC: 3 | RNVC: 2

26 Jan 2022

3040-01-699-1570
Nonaircraft Mechanical Actuator

016991570
CTORVO-000294: RNCC: 3 | RNVC: 2
505-8787568 REV A (F3): RNCC: 5 | RNVC: 2
505-8787568 REV A: RNCC: D | RNVC: 9

12 Jan 2022

3040-01-700-8071
Controllable Swashplate

017008071
06100-08114-102: RNCC: 3 | RNVC: 2
06100-08114: RNCC: D | RNVC: 9

14 Apr 2022

3040-01-700-3065
Straight Shaft

017003065
12644201: RNCC: 3 | RNVC: 2
BS.2318.00.00.027: RNCC: 5 | RNVC: 9

23 Mar 2022

3040-01-699-0339
Shaft Collar

016990339
3890AS004706-01: RNCC: 3 | RNVC: 2

4 Jan 2022

3040-01-701-4601
Worm Wheel Gearshaft

017014601
506-30-51: RNCC: 3 | RNVC: 2
506-30-51: RNCC: 5 | RNVC: 9
241-8592072 REV C SHEET 2 OF 2: RNCC: D | RNVC: 9

17 May 2022

3040-01-699-0223
Shaft Idler

016990223
8418365: RNCC: 3 | RNVC: 1
8418365: RNCC: 5 | RNVC: 1

3 Jan 2022

3040-01-701-6079
Counterbalance Weight

017016079
952B928-5: RNCC: 3 | RNVC: 2

26 May 2022

3040-01-701-6078
Counterbalance Weight

017016078
952B928-6: RNCC: 3 | RNVC: 2

26 May 2022

3040-01-701-5056
Shaft Retaining Plate

017015056
8287874: RNCC: 3 | RNVC: 2
8288670PC01: RNCC: C | RNVC: 1
8288670: RNCC: D | RNVC: 9

19 May 2022

3040-01-698-8357
Nonvehicular Propeller Shaft

016988357
HC3Z-4A376-B: RNCC: 3 | RNVC: 2
HC3Z-4A376-B: RNCC: 5 | RNVC: 2
HC3Z-4A376-A: RNCC: 5 | RNVC: 9

14 Dec 2021

3040-01-701-7604
Air Clutch Outer Shaft End Cap

017017604
8287870: RNCC: 3 | RNVC: 2
8287862PC08: RNCC: C | RNVC: 1
8287862: RNCC: D | RNVC: 9

7 Jun 2022

3040-01-700-6352
Shaft Retaining Plate

017006352
607989-241-CA: RNCC: 3 | RNVC: 2
801635-541 PIECE 7: RNCC: 5 | RNVC: 1
801635-541: RNCC: D | RNVC: 9

5 Apr 2022

3040-01-701-3814
Mechanically Actuated Spindle

017013814
167-7569488 / PC NO 143: RNCC: 3 | RNVC: 2
SP002107 / PC NO 65: RNCC: 5 | RNVC: 1
7569488 / PC NO 143: RNCC: C | RNVC: 1

13 May 2022

3040-01-701-5254
Shouldered Shaft

017015254
8287636: RNCC: 1 | RNVC: 2
P3860-005C: RNCC: 3 | RNVC: 2

20 May 2022

3040-01-701-7124
Straight Shaft Assembly

017017124
8287954: RNCC: 3 | RNVC: 2
8287862PC33: RNCC: D | RNVC: 9

2 Jun 2022

3040-01-700-6445
Multiple Gears Gearshaft

017006445
06361-08004-101: RNCC: 3 | RNVC: 2

5 Apr 2022

3040-01-702-6816
Spline Adapter

017026816
03E-95164-0: RNCC: 3 | RNVC: 2

20 Jul 2022

3040-01-700-6624
Shaft Collar

017006624
10092067: RNCC: 3 | RNVC: 2
10091884 ITEM 9: RNCC: C | RNVC: 1

6 Apr 2022

3040-01-702-2816
Pawl

017022816
19009A0112: RNCC: 3 | RNVC: 2

27 Jun 2022

3040-01-701-4127
Straight Shaft

017014127
251T0100-130: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-701-4293
Shaft Idler

017014293
506-30-23: RNCC: 3 | RNVC: 2
241-8592072 REV C SHEET 1 OF 2: RNCC: D | RNVC: 9

16 May 2022

3040-01-701-7879
Linear Actuating Cylinder Cap

017017879
930-31553: RNCC: 3 | RNVC: 1

8 Jun 2022

3040-01-700-4174
Remote Control Lever

017004174
TEC-R11-MAN-TC: RNCC: 3 | RNVC: 2
TO 36A12-12-49-4: RNCC: D | RNVC: 9

28 Mar 2022

3040-01-702-0090
Straight Shaft

017020090
12617855: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-700-8385
Shouldered Shaft

017008385
7262200336: RNCC: 3 | RNVC: 2

15 Apr 2022

3040-01-702-1824
Counterbalance Weight

017021824
717407166-002: RNCC: 3 | RNVC: 2

22 Jun 2022

3040-01-701-0306
Linear Actuating Cylinder

017010306
R5-314-16-014.375A-MC: RNCC: 3 | RNVC: 2
IQ8901-0010-01A REV 3 ITEM 3: RNCC: D | RNVC: 9

22 Apr 2022

3040-01-701-9117
Rigid Connecting Link

017019117
1TD13G1H00003-1001: RNCC: 3 | RNVC: 2
22555-1: RNCC: 3 | RNVC: 2

15 Jun 2022

3040-01-703-0556
Shaft Collar

017030556
456-7822: RNCC: 3 | RNVC: 2

15 Aug 2022

3040-01-703-3962
Assembly Hub

017033962
A80090036M-A: RNCC: 3 | RNVC: 2
A816700011 REV 03 ITEM 1: RNCC: 5 | RNVC: 2
1806700011 REV 02 ITEM 1: RNCC: D | RNVC: 9

2 Sep 2022

3040-01-701-0754
Remote Control Lever

017010754
725-8837478-A9: RNCC: 3 | RNVC: 2
LOA017170-A9: RNCC: 5 | RNVC: 2
725-8837478: RNCC: D | RNVC: 9

26 Apr 2022

3040-01-700-8052
Rigid Connecting Link

017008052
0953SA119: RNCC: 3 | RNVC: 2
70016718: RNCC: 5 | RNVC: 9

14 Apr 2022

3040-01-702-9647
Counterbalance Weight

017029647
6539583: RNCC: 3 | RNVC: 2

9 Aug 2022

3040-01-698-1090
Disc Brake Caliper

016981090
HC3Z-2B292-B: RNCC: 3 | RNVC: 2
HC3Z-2B292-B: RNCC: 3 | RNVC: 9

28 Oct 2021

3040-01-699-5064
Linear Actuating Cylinder Cap

016995064
332/E7798: RNCC: 3 | RNVC: 2

4 Feb 2022

3040-01-698-0172
Ball Joint

016980172
BC3Z-3049-B: RNCC: 3 | RNVC: 2
BC3Z-3049-B: RNCC: 3 | RNVC: 9

22 Oct 2021

3040-01-543-3361
Linear Actuating Cylinder Piston

015433361
3W0640: RNCC: 3 | RNVC: 2
3W-0640: RNCC: 5 | RNVC: 2

8 Sep 2006

3040-01-698-0015
Body Hub

016980015
5-16-2103-00: RNCC: 3 | RNVC: 2

22 Oct 2021

3040-01-698-0146
Friction Lining

016980146
7B1-06492: RNCC: 3 | RNVC: 2
7B1-06492 REV A: RNCC: 5 | RNVC: 2
P008486 REV D ITEM NO 36: RNCC: C | RNVC: 1

22 Oct 2021

3040-01-699-2072
Transmission Sleeve

016992072
3030441-001: RNCC: 3 | RNVC: 2

15 Jan 2022

3040-01-699-1569
Nonaircraft Mechanical Actuator

016991569
CTORVO-000285: RNCC: 3 | RNVC: 2
505-8787566 REV A (F4): RNCC: 5 | RNVC: 2
505-8787566 REV A: RNCC: D | RNVC: 9

12 Jan 2022

3040-01-641-1212
Body Hub

016411212
7550479-DF331473-0002: RNCC: 3 | RNVC: 1
801-6406788 FIND 2: RNCC: 5 | RNVC: 1
DF331473 FIND 2: RNCC: 5 | RNVC: 1
211061327: RNCC: 5 | RNVC: 1
DF331473-0002: RNCC: 5 | RNVC: 1
G547-0003-DF331473-0002: RNCC: 5 | RNVC: 1
7383858-DF331473-0002: RNCC: 5 | RNVC: 1
H547-0001-DF331473-0002: RNCC: 5 | RNVC: 1
801-6406788 FIND 2D4: RNCC: 5 | RNVC: 2
7383858-DF331473-0002D4: RNCC: 5 | RNVC: 2

9 Jan 2015

3040-01-700-0137
Straight Shaft

017000137
MX00017: RNCC: 3 | RNVC: 9

11 Mar 2022

3040-01-696-4356
Linear Actuating Cylinder Assembly

016964356
D24008022FHAZ: RNCC: 3 | RNVC: 2
D240008022FHAZ: RNCC: 5 | RNVC: 9
3730487: RNCC: 7 | RNVC: 2

27 Jul 2021

3040-01-698-6433
Straight Shaft

016986433
8592552-046: RNCC: 3 | RNVC: 2
251-8592097 REV F FN 505: RNCC: 5 | RNVC: 2

1 Dec 2021

3040-01-697-7213
Straight Shaft

016977213
10017335-001-001: RNCC: 3 | RNVC: 2

6 Oct 2021

3040-01-699-8007
Linear Actuating Cylinder Cap

016998007
CC49812-001: RNCC: 3 | RNVC: 2

25 Feb 2022

3040-00-421-4791
Rigid Connecting Link

004214791
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-490: RNCC: 3 | RNVC: 2

9 Dec 1970

3040-01-699-5085
Linear Actuating Cylinder Cap

016995085
332/G8463: RNCC: 3 | RNVC: 2

4 Feb 2022

3040-01-698-5300
Linear Actuating Cylinder Cap

016985300
001390-000PC18: RNCC: 3 | RNVC: 2
B-0595-032055-000: RNCC: 3 | RNVC: 2

22 Nov 2021

3040-01-698-6444
Actuation Rod

016986444
8592097-013: RNCC: 3 | RNVC: 2
251-8592097 REV F FN 514: RNCC: 5 | RNVC: 2

1 Dec 2021

3040-00-118-8685
Manual Control Lever

001188685
XG8383984: RNCC: 3 | RNVC: 9
8754003: RNCC: 5 | RNVC: 2
XG8383984: RNCC: 5 | RNVC: 9
2520001188685: RNCC: 5 | RNVC: 9

14 Oct 1968

3040-00-420-2017
Positioning Shoe

004202017
SG1732PC16: RNCC: 3 | RNVC: 2
S805GE: RNCC: 3 | RNVC: 2
SG2632PC16: RNCC: 3 | RNVC: 2
SG1938PC16: RNCC: 3 | RNVC: 2
SG2053PC16: RNCC: 3 | RNVC: 2
SG2073PC16: RNCC: 3 | RNVC: 2
SG2635PC16: RNCC: 3 | RNVC: 2
SG1735PC16: RNCC: 3 | RNVC: 2
SG2050PC16: RNCC: 3 | RNVC: 2
SG1941PC16: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-704-3912
Straight Shaft Assembly

017043912
5-13-10202-3: RNCC: 3 | RNVC: 2
5-13-10202-3: RNCC: 5 | RNVC: 2
5-13-10202: RNCC: D | RNVC: 9

9 Sep 2022

3040-01-692-8446
Multiple Gears Gearshaft

016928446
8000-0367: RNCC: 3 | RNVC: 2
8592275-001: RNCC: 3 | RNVC: 9
311-8592275: RNCC: D | RNVC: 9

14 Jan 2021

3040-01-479-4853
Linear Actuating Cylinder Piston

014794853
CB29098-001: RNCC: 3 | RNVC: 2
CC79492-001: RNCC: 3 | RNVC: 2
30078-41470 ITEM 11: RNCC: 5 | RNVC: 2
30096-41450 ITEM 11: RNCC: 5 | RNVC: 2
41461: RNCC: 5 | RNVC: 9
30078-41470: RNCC: D | RNVC: 9
30096-41450: RNCC: D | RNVC: 9

23 Oct 2000

3040-01-702-0101
Rigid Connecting Link

017020101
12618214: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-702-7807
Shouldered Shaft

017027807
184937-1: RNCC: 3 | RNVC: 2

27 Jul 2022

3040-01-703-1348
Nonrotating Shaft Eye Bracket

017031348
510479-10: RNCC: 3 | RNVC: 2
510479: RNCC: D | RNVC: 9

18 Aug 2022

3040-01-073-5563
Straight Shaft

010735563
2241322-5: RNCC: 3 | RNVC: 2
2241322-5: RNCC: 3 | RNVC: 9
2241322-4: RNCC: 5 | RNVC: 9
2241322-2: RNCC: C | RNVC: 1

17 Mar 1979

3040-01-702-6534
Rigid Connecting Link

017026534
212A1125-31: RNCC: 3 | RNVC: 2

19 Jul 2022

3040-00-121-6391
Rigid Connecting Link

001216391
206-040-192-001: RNCC: 3 | RNVC: 2
206-040-192-1: RNCC: 5 | RNVC: 2

25 Oct 1968

3040-01-384-1054
Push-Pull Control Assembly

013841054
3009-075-1615: RNCC: 3 | RNVC: 2
032377-003-53FT: RNCC: 5 | RNVC: 9
32377-003-53FT: RNCC: 5 | RNVC: 9
33-C-636IN: RNCC: 5 | RNVC: 9
33C53FT: RNCC: 5 | RNVC: 9
D032377-003-53FT: RNCC: 5 | RNVC: 9
032377-003-53FT: RNCC: 5 | RNVC: 9
33C53FT: RNCC: 5 | RNVC: 9
D032377-003-53FT: RNCC: 5 | RNVC: 9
32377-003-53FT: RNCC: 5 | RNVC: 9

8 Dec 1993

3040-01-578-7519
Shaft Collar

015787519
790673-001 OXYGEN CLEAN: RNCC: 3 | RNVC: 1
790542 ITEM NO 5CP: RNCC: 5 | RNVC: 1
790673-001: RNCC: 5 | RNVC: 1
790673-001 OXYGEN CLEANCP: RNCC: 5 | RNVC: 2
790542 ITEM NO 5CP: RNCC: 5 | RNVC: 2
790673-001CP: RNCC: 5 | RNVC: 2

19 Oct 2009

3040-01-168-1488
Rigid Connecting Link

011681488
12255720: RNCC: 3 | RNVC: 2
2540011681488: RNCC: 6 | RNVC: 9

13 Dec 1983

3040-01-552-3749
Rigid Connecting Link

015523749
1821428: RNCC: 3 | RNVC: 2
1821428: RNCC: 5 | RNVC: 2
10466173: RNCC: 6 | RNVC: 9

12 Jun 2007

3040-01-257-8906
Remote Control Lever

012578906
T63652: RNCC: 3 | RNVC: 2
T11701: RNCC: 5 | RNVC: 9

25 Jun 1987

3040-01-326-3187
Body Hub

013263187
C109046: RNCC: 3 | RNVC: 2
E105860 PIECE 66: RNCC: 5 | RNVC: 2
D305450 PIECE 66: RNCC: 5 | RNVC: 2
E108165 PIECE 66: RNCC: 5 | RNVC: 2
E108186 PIECE 66: RNCC: 5 | RNVC: 2
E108186 PIECE 66: RNCC: 5 | RNVC: 9
C109046: RNCC: 5 | RNVC: 9
D305450 PIECE 66: RNCC: 5 | RNVC: 9
E105860 PIECE 66: RNCC: 5 | RNVC: 9
E108165 PIECE 66: RNCC: 5 | RNVC: 9

21 Sep 1990

3040-01-597-2326
Pawl

015972326
3W9208: RNCC: 3 | RNVC: 2
3W-9208: RNCC: 5 | RNVC: 2
343-9606: RNCC: D | RNVC: 9

2 Jun 2011

3040-01-706-4891
Shaft Idler

017064891
4W-6862: RNCC: 3 | RNVC: 2

30 Nov 2022

3040-01-706-6749
Cylinder Support

017066749
576-9689: RNCC: 3 | RNVC: 2

12 Dec 2022

3040-01-707-8045
Shouldered Shaft

017078045
031537: RNCC: 3 | RNVC: 2
309846: RNCC: 5 | RNVC: 2
031537: RNCC: 5 | RNVC: 9

23 Feb 2023

3040-01-705-8221
Counterbalance Weight

017058221
603862-0: RNCC: 3 | RNVC: 2

14 Oct 2022

3040-01-555-1058
Sun Gear

015551058
7T9370: RNCC: 3 | RNVC: 2
7T-9370: RNCC: 5 | RNVC: 2

29 Aug 2007

3040-01-565-0315
Hub (Pinion)

015650315
401-02329: RNCC: 3 | RNVC: 2
401-02297(K) POS 6: RNCC: 5 | RNVC: 2
401-02297(K): RNCC: D | RNVC: 9

9 Jul 2008

3040-00-567-0518
Hub Clamp

005670518
9360130-2: RNCC: 3 | RNVC: 2
L1-11: RNCC: 3 | RNVC: 2
711699-040: RNCC: 5 | RNVC: 2
711699-40: RNCC: 5 | RNVC: 2
9147C5035-2: RNCC: 5 | RNVC: 9
3040PL0733101: RNCC: 6 | RNVC: 9
3040005670518: RNCC: 6 | RNVC: 9
9360130: RNCC: 7 | RNVC: 1
9147C5035-2: RNCC: 7 | RNVC: 2
59127-2: RNCC: C | RNVC: 1

1 Jan 1961

NSN 3040-01-467-2856 014672856 FLEXIBLE SHAFT

3040-01-467-2856
Flexible Shaft

014672856
225-01: RNCC: 3 | RNVC: 9
0350624119185: RNCC: 5 | RNVC: 2
225: RNCC: 5 | RNVC: 9

23 Aug 1999

3040-01-442-1737
Push-Pull Control Assembly

014421737
CC23022: RNCC: 3 | RNVC: 2
3009-075-0671: RNCC: 5 | RNVC: 2
D032377-003-22FT: RNCC: 5 | RNVC: 9
D032377-003-264IN: RNCC: 5 | RNVC: 9
32377-003-264IN: RNCC: 5 | RNVC: 9
32377-003-264IN: RNCC: 5 | RNVC: 9
33C-264IN: RNCC: 5 | RNVC: 9
032377-003-264.0: RNCC: 5 | RNVC: 9
33C-22FT: RNCC: 5 | RNVC: 9
D032377-003-264IN: RNCC: 5 | RNVC: 9

6 Mar 1997

3040-00-035-9407
Manual Control Lever

000359407
B5468402004: RNCC: 3 | RNVC: 9
22360501: RNCC: 5 | RNVC: 9
S3998LPC12: RNCC: 5 | RNVC: 9
S4004LPC12: RNCC: 5 | RNVC: 9
S5163LPC12: RNCC: 5 | RNVC: 9
11722: RNCC: 5 | RNVC: 9
S3534L2PC12: RNCC: 5 | RNVC: 9
S3535L1PC12: RNCC: 5 | RNVC: 9
S3488L2PC12: RNCC: 5 | RNVC: 9
S3681LPC12: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-702-8619
Shouldered Shaft

017028619
184723-1: RNCC: 3 | RNVC: 2

2 Aug 2022

3040-01-702-9324
Push-Pull Control Assembly

017029324
60178-002-05: RNCC: 3 | RNVC: 2
60178-000-97: RNCC: 5 | RNVC: 2

8 Aug 2022

3040-01-702-7196
Straight Shaft

017027196
12309/5-151-000: RNCC: 3 | RNVC: 2
12151/ PL/ REV C FN 9: RNCC: 5 | RNVC: 2

22 Jul 2022

3040-01-702-0573
Spur Gearshaft

017020573
12617359: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-701-6359
Spur Gearshaft

017016359
256T5527-1: RNCC: 3 | RNVC: 1

27 May 2022

3040-01-701-6081
Counterbalance Weight

017016081
952B928-10: RNCC: 3 | RNVC: 2

26 May 2022

3040-01-701-1582
Spur Gearshaft

017011582
0693-10002-101: RNCC: 3 | RNVC: 2

29 Apr 2022

3040-01-698-3901
Worm Wheel Gearshaft

016983901
50500-0200/50135-0222: RNCC: 3 | RNVC: 2

15 Nov 2021

3040-01-700-9226
Piston Ring

017009226
137698: RNCC: 3 | RNVC: 2
71881800 PL: RNCC: D | RNVC: 9
71881800 REV- POS 0024: RNCC: D | RNVC: 9

20 Apr 2022

3040-01-699-1579
Nonaircraft Mechanical Actuator

016991579
CTORVO-000328: RNCC: 3 | RNVC: 2
505-8787572 REV A (F11): RNCC: 5 | RNVC: 2
505-8787572 REV A: RNCC: D | RNVC: 9

12 Jan 2022

3040-01-701-4118
Straight Shaft

017014118
251T0101-504: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-219-4795
Shouldered Shaft

012194795
656C0200K091A: RNCC: 3 | RNVC: 2
8656C0200K091A: RNCC: 3 | RNVC: 2
999R0178 PC 2-1: RNCC: 5 | RNVC: 2

26 Oct 1985

3040-01-700-7074
Brake Disc

017007074
HC3Z-1125-A: RNCC: 3 | RNVC: 9

8 Apr 2022

3040-01-700-7864
Housing Adapter

017007864
5802076648: RNCC: 3 | RNVC: 2

13 Apr 2022

3040-01-700-8485
Gearbox Parts Kit

017008485
2502000010: RNCC: 3 | RNVC: 2

16 Apr 2022

3040-01-699-7385
Gearshaft Set

016997385
14008886: RNCC: 3 | RNVC: 2
14000093: RNCC: C | RNVC: 1

23 Feb 2022

3040-01-698-7754
Nonaircraft Mechanical Actuator

016987754
30096-CC36605: RNCC: 3 | RNVC: 2
CC36605: RNCC: D | RNVC: 9

7 Dec 2021

3040-01-699-4534
Shouldered Axle

016994534
4360297: RNCC: 3 | RNVC: 2

1 Feb 2022

3040-01-699-3507
Shifter Shoe

016993507
185694: RNCC: 3 | RNVC: 2
20809078 REVISION C PIECE 6: RNCC: C | RNVC: 1
20809068: RNCC: D | RNVC: 9

25 Jan 2022

3040-01-700-0056
Multiple Gears Gearshaft

017000056
4525016: RNCC: 3 | RNVC: 2

11 Mar 2022

3040-01-699-8870
Rigid Connecting Link

016998870
123BM97139-3: RNCC: 3 | RNVC: 2

4 Mar 2022

3040-01-686-8658
Rigid Connecting Link

016868658
444-001-002-105: RNCC: 3 | RNVC: 2
444-001-002-101: RNCC: 5 | RNVC: 9

9 Mar 2020

3040-01-682-4341
Nonaircraft Mechanical Actuator

016824341
721-8541919-24: RNCC: 3 | RNVC: 2
721-8541924-A2TR: RNCC: 5 | RNVC: 2
R8611501-24: RNCC: C | RNVC: 1
R8611506-A2: RNCC: C | RNVC: 1
721-8541924-A2: RNCC: C | RNVC: 1

7 Aug 2019

3040-01-691-4828
Tongue Cylinder

016914828
936538: RNCC: 1 | RNVC: 2
100210B: RNCC: 3 | RNVC: 2
100298B: RNCC: 3 | RNVC: 2

13 Oct 2020

3040-01-424-7594
Linear Actuating Cylinder

014247594
USN01419: RNCC: 3 | RNVC: 2
22-07168: RNCC: 3 | RNVC: 9
USN01419: RNCC: 5 | RNVC: 2
USN01419: RNCC: 5 | RNVC: 2
USN01419: RNCC: 5 | RNVC: 2
589-6953106: RNCC: 5 | RNVC: 9
22-07168: RNCC: C | RNVC: 1
589-6953106: RNCC: C | RNVC: 1

5 Feb 1996

3040-00-945-6397
Rigid Connecting Link

009456397
NAS356: RNCC: 3 | RNVC: 1
NAS356-81-1050: RNCC: 3 | RNVC: 2

1 Mar 1966

3040-01-641-5830
Latch Interlock Assembly

016415830
100-7108435-B1: RNCC: 3 | RNVC: 1
H547-0290-B1: RNCC: 5 | RNVC: 1
H547-1720-1: RNCC: 5 | RNVC: 1
7383858-H5470290-0B1: RNCC: 5 | RNVC: 1
H547-0001-H5470290-0B1: RNCC: 5 | RNVC: 1
167-7107409-1: RNCC: 5 | RNVC: 1
167-7107409-1L1: RNCC: 5 | RNVC: 2
7383858-H5470290-0B1L1: RNCC: 5 | RNVC: 2
H547-0001-H5470290-0B1L1: RNCC: 5 | RNVC: 2
H547-0290-B1L1: RNCC: 5 | RNVC: 2

27 Jan 2015

3040-01-543-3358
Straight Shaft

015433358
3T4011: RNCC: 3 | RNVC: 2
3T-4011: RNCC: 5 | RNVC: 2

8 Sep 2006

3040-00-541-1560
Ball Joint

005411560
109408: RNCC: 3 | RNVC: 9
5164321: RNCC: 5 | RNVC: 2
D346-261: RNCC: 5 | RNVC: 2
109408: RNCC: 5 | RNVC: 2
109408: RNCC: 5 | RNVC: 2
G109408: RNCC: 5 | RNVC: 2
109408: RNCC: 5 | RNVC: 9
135X7: RNCC: 5 | RNVC: 9
5164321: RNCC: 5 | RNVC: 9
109408: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-224-9917
Shouldered Shaft

012249917
968251-00PH: RNCC: 3 | RNVC: 2
968251-00PH: RNCC: 3 | RNVC: 2
968251-00: RNCC: 3 | RNVC: 2
968251-00: RNCC: 3 | RNVC: 2
968251-00PH: RNCC: 3 | RNVC: 9
RY-167693 PC2: RNCC: 5 | RNVC: 1
RY-167693 PC2: RNCC: 5 | RNVC: 9
S6226-JZ-MMA-010 7-15-24: RNCC: 5 | RNVC: 9

25 Jan 1986

3040-01-641-7316
Shaft Collar

016417316
7550479-DF331473-0006: RNCC: 3 | RNVC: 1
7383858-DF331473-0006: RNCC: 5 | RNVC: 1
801-6406768 FIND 6: RNCC: 5 | RNVC: 1
G547-0003-DF331473-0006: RNCC: 5 | RNVC: 1
H547-0001-DF331473-0006: RNCC: 5 | RNVC: 1
DF331473 FIND 6: RNCC: 5 | RNVC: 1
211060922: RNCC: 5 | RNVC: 1
DF331473-0006: RNCC: 5 | RNVC: 1
211060922D4: RNCC: 5 | RNVC: 2
801-6406768 FIND 6D4: RNCC: 5 | RNVC: 2

30 Jan 2015

3040-01-542-7623
Linear Actuating Cylinder

015427623
NP0623-1: RNCC: 3 | RNVC: 2
NP0623-1 (AUTH.DISTRIB.FOR 830Q4: RNCC: 3 | RNVC: 2
NP-623 PC 1: RNCC: 5 | RNVC: 9
NP-623-1: RNCC: 5 | RNVC: 9
NP-622 PC 103: RNCC: 5 | RNVC: 9

17 Aug 2006

3040-01-433-8324
Push-Pull Control Assembly

014338324
32377-003-27FT: RNCC: 3 | RNVC: 2
D038038-003-27FT: RNCC: 5 | RNVC: 2
33C-003-324IN: RNCC: 5 | RNVC: 2
5105638 PC 125: RNCC: 5 | RNVC: 2
32377-003-324: RNCC: 5 | RNVC: 2
33C-003-27FT: RNCC: 5 | RNVC: 2
D038038-003-324IN: RNCC: 5 | RNVC: 2
32377-003-324: RNCC: 5 | RNVC: 9
33C-003-324IN.: RNCC: 5 | RNVC: 9
33C-003-27FT: RNCC: 5 | RNVC: 9

11 Jul 1996

3040-01-643-9925
Shaft Operator

016439925
7383858-H5471721-053: RNCC: 3 | RNVC: 1
167-7108111-53: RNCC: 5 | RNVC: 1
H547-0001-H5471721-053: RNCC: 5 | RNVC: 1
H547-1721-53: RNCC: 5 | RNVC: 1
7383858-7108111-53: RNCC: 5 | RNVC: 1
H5470001-H5471721-53: RNCC: 5 | RNVC: 1
167-7108111-53D4: RNCC: 5 | RNVC: 2
7383858-H5471721-053D4: RNCC: 5 | RNVC: 2
H547-0001-H5471721-053D4: RNCC: 5 | RNVC: 2
H547-1721-53D4: RNCC: 5 | RNVC: 2

17 Apr 2015

3040-01-642-4489
Ball Joint

016424489
167-7384258-91: RNCC: 3 | RNVC: 1
H5471905-091: RNCC: 5 | RNVC: 1
H547-1905-91: RNCC: 5 | RNVC: 1
7383858-H5471905-091: RNCC: 5 | RNVC: 1
H547-0001-H5471905-091: RNCC: 5 | RNVC: 1
7383858-H5471905-091D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-091D4: RNCC: 5 | RNVC: 2
H547-1905-91D4: RNCC: 5 | RNVC: 2
H5471905-091D4: RNCC: 5 | RNVC: 2
111-B-0027-2D4: RNCC: 5 | RNVC: 2

25 Feb 2015

3040-01-546-0718
Linear Actuating Cylinder Assembly

015460718
9241500001: RNCC: 3 | RNVC: 2
MP-0002721G: RNCC: 3 | RNVC: 2
924150.0001: RNCC: 5 | RNVC: 2
924150.0001: RNCC: 5 | RNVC: 2
CV185420: RNCC: 5 | RNVC: 2
A354530100: RNCC: E | RNVC: 8

5 Dec 2006

3040-00-446-7560
Thrust Bearing Shoe

004467560
462754PC1T03: RNCC: 3 | RNVC: 2
DD5781PC13: RNCC: 5 | RNVC: 2
27-29-19APC2T04: RNCC: 5 | RNVC: 2
27-29-19BPC2T04: RNCC: 5 | RNVC: 2
29-2754-1: RNCC: 5 | RNVC: 2
61098PC140MT140P: RNCC: 5 | RNVC: 2
801523PC1T03: RNCC: 5 | RNVC: 2
27-29-19BITEM2T04: RNCC: 5 | RNVC: 2
29-2754-1: RNCC: 5 | RNVC: 2
462754PC1T03: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-674-2367
Rigid Connecting Link

016742367
EB3Z5808A: RNCC: 3 | RNVC: 2
7423179364: RNCC: 5 | RNVC: 2
EB3C4264AB: RNCC: 5 | RNVC: 9

17 Jul 2018

3040-01-453-8976
Straight Shaft

014538976
211068971: RNCC: 3 | RNVC: 1
751-6402302 FIND6: RNCC: 5 | RNVC: 1
751-6402316 ITEM1: RNCC: 5 | RNVC: 1
751-6402301 ITEM6: RNCC: 5 | RNVC: 1
751-6402301 FIND 6: RNCC: 5 | RNVC: 1
211068971L1: RNCC: 5 | RNVC: 2
751-6402301 FIND 6L1: RNCC: 5 | RNVC: 2
751-6402302 FIND6L1: RNCC: 5 | RNVC: 2
751-6402302 ITEM 6L1: RNCC: 5 | RNVC: 2
751-6402301 ITEM6L1: RNCC: 5 | RNVC: 2

13 Mar 1998

3040-00-229-9000
Linear Actuating Cylinder Piston Rod

002299000
305475030: RNCC: 3 | RNVC: 2
20-07475-02: RNCC: 5 | RNVC: 9

28 Dec 1971

3040-01-702-8583
Straight Shaft

017028583
4003910: RNCC: 3 | RNVC: 2

2 Aug 2022

3040-00-216-8776
Worm Shaft

002168776
11-2LALT1PC28: RNCC: 3 | RNVC: 2
11-2DALT1PC28: RNCC: 3 | RNVC: 2
12-1FALT1PC28: RNCC: 3 | RNVC: 2
12-3EPC30: RNCC: 3 | RNVC: 2
12-3HALT1PC30: RNCC: 3 | RNVC: 2
12-3JPC30: RNCC: 3 | RNVC: 2
12-1KALT1PC28: RNCC: 3 | RNVC: 2
11-4DPC30: RNCC: 3 | RNVC: 2
12-3BPC30: RNCC: 3 | RNVC: 2
12-1HPC28: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-544-3389
Straight Shaft

015443389
751-7072601-7: RNCC: 3 | RNVC: 1
H821-0603-7: RNCC: 5 | RNVC: 1
751-7072604-7: RNCC: 5 | RNVC: 1
H821-0601-7: RNCC: 5 | RNVC: 1
H821-0602-7: RNCC: 5 | RNVC: 1
H821-0604-7: RNCC: 5 | RNVC: 1
7072614-1: RNCC: 5 | RNVC: 1
751-7072614-1: RNCC: 5 | RNVC: 1
751-7072602-7: RNCC: 5 | RNVC: 1
751-7072603-7: RNCC: 5 | RNVC: 1

11 Oct 2006

3040-01-670-4079
Shouldered Shaft

016704079
7550477-G5254201-04: RNCC: 3 | RNVC: 1
7384908 PN 4: RNCC: 5 | RNVC: 1
G5254201-04: RNCC: 5 | RNVC: 1
G547-0001-G5254201-04: RNCC: 5 | RNVC: 1
G525-4201 PN 4: RNCC: 5 | RNVC: 1
12100M501A: RNCC: 5 | RNVC: 1
G547-0001-G5254201-04D4: RNCC: 5 | RNVC: 2
G525-4201 PN 4D4: RNCC: 5 | RNVC: 2
12100M501AD4: RNCC: 5 | RNVC: 2
7384908 PN 4D4: RNCC: 5 | RNVC: 2

22 Feb 2018

3040-01-669-1420
Linear Actuating Cylinder Assembly

016691420
400/L7886: RNCC: 3 | RNVC: 2
332/F7185: RNCC: 5 | RNVC: 9

22 Dec 2017

3040-00-163-0371
Spur Gearshaft

001630371
19609: RNCC: 3 | RNVC: 2
A1210PC45: RNCC: 5 | RNVC: 2
A1211PC45: RNCC: 5 | RNVC: 2
A907PC45: RNCC: 5 | RNVC: 2
A914PC45: RNCC: 5 | RNVC: 2
A915PC45: RNCC: 5 | RNVC: 2
A906PC45: RNCC: 5 | RNVC: 2
99119609: RNCC: 5 | RNVC: 2
A1116PC45: RNCC: 5 | RNVC: 2
A1126PC45: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-216-0944
Spur Gearshaft

012160944
2642-343-12 ITEM 6: RNCC: 3 | RNVC: 2
845-5765823-0006: RNCC: 5 | RNVC: 2
845-5765824-0004: RNCC: 5 | RNVC: 2
2642-343-13 ITEM 6: RNCC: 5 | RNVC: 2
2642-343-12 ITEM 6: RNCC: 5 | RNVC: 9
2642-343-12 ITEM 6: RNCC: 5 | RNVC: 9
576584-0006: RNCC: C | RNVC: 1
2642-343-12: RNCC: D | RNVC: 9
2642-343-13: RNCC: D | RNVC: 9
845-5765824: RNCC: D | RNVC: 9

6 Sep 1985

3040-00-149-2170
Thrust Bearing Shoe

001492170
8-3153-7: RNCC: 3 | RNVC: 2
8-3153-7: RNCC: 5 | RNVC: 2
41J245PC7T09: RNCC: 5 | RNVC: 2
19F234PC1: RNCC: 5 | RNVC: 2
463152PC7T09: RNCC: 5 | RNVC: 2
M19F234PC1: RNCC: 5 | RNVC: 2
362848PC7T09: RNCC: 5 | RNVC: 2
41J244PC7T09: RNCC: 5 | RNVC: 2
463153PC7T09: RNCC: 5 | RNVC: 2
10G301PC1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-454-3221
Linear Actuating Cylinder Assembly

014543221
3798328-2: RNCC: 3 | RNVC: 2
751-6402401-66: RNCC: 5 | RNVC: 2
211076068: RNCC: 5 | RNVC: 2
751-6402402 ITEM 66: RNCC: 5 | RNVC: 2
751-6402409 ITEM 1: RNCC: 5 | RNVC: 2
751-6402402-66: RNCC: 5 | RNVC: 2
751-6402408-66: RNCC: C | RNVC: 1
751-6402403-66: RNCC: C | RNVC: 1
751-6402401 FIND 66: RNCC: C | RNVC: 1
751-6402406 ITEM 66: RNCC: C | RNVC: 1

26 Mar 1998

3040-01-580-1294
Rigid Connecting Link

015801294
9W2822: RNCC: 3 | RNVC: 2
9W-2822: RNCC: 5 | RNVC: 2

4 Dec 2009

3040-01-474-3767
Rotary Electro-Mechanical Actuator

014743767
4086390: RNCC: 1 | RNVC: 3
442043: RNCC: 3 | RNVC: 3
442043-2: RNCC: 5 | RNVC: 3

2 May 2000

3040-01-398-5289
Linear Actuating Cylinder Assembly Parts Kit

013985289
211052018: RNCC: 3 | RNVC: 1
6401267 IT 136: RNCC: 5 | RNVC: 1
6401440-1: RNCC: 5 | RNVC: 1
595-6401440 ITEM 1: RNCC: 5 | RNVC: 1
595-6401440-1: RNCC: 5 | RNVC: 1
595-6401267 ITEM 136: RNCC: 5 | RNVC: 1
595-6401440-1L1: RNCC: 5 | RNVC: 2
6401267IT 136L1: RNCC: 5 | RNVC: 2
6401440-1L1: RNCC: 5 | RNVC: 2
595-6401440 ITEM 1L1: RNCC: 5 | RNVC: 2

4 Nov 1994

Load More Results