What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

Miscellaneous Power Transmission Equipment - United States (US)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by United States (US) - NCB is 00 to 09

Page 1 of 300

NSN Format for Miscellaneous Power Transmission Equipment
Codified by United States

30	40	01	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - United States (US)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 1124 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 87 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 23 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 68 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 11 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 126 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 10 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 82 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 91 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 197 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 184 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 80 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 247 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 156 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 485 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 449 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 3066 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 15 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 50 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 728 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 16 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 13 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 965 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Control Pedal? 40 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 16 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 504 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 26 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 40 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 59 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 662 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 1724 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 662 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 66 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 236 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 55 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 13282 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 1410 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 1284 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 763 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 116 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 2910 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 1519 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 9714 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 206 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 2098 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 95 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 17082 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 15 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 112 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 889 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 1417 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1143 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 40 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 40 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 194 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 4545 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 194 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 88 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Brake Shoe Parts Kit? 16 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 33 Items
What is a Counterbalance Weight? 3265 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 134 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 64 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 143 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 28 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 28 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 142 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 129 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 13 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 20 Items
Shaft And Spring Assembly,Pressure Regulator 18 Items
End Cap,Outer Shaft,Air Clutch 15 Items
Hub,Range Clutch,Transmission 32 Items
Shaft,Clutch,Transfer Drive 36 Items
Pivot Shaft Assembly 151 Items
What is a Shaft Idler? 150 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 97 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Sleeve,Transmission 53 Items
Fitting,Lever 35 Items
Cup,Piston Follower 16 Items
What is a Piston Rod Guide? 121 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Straight Axle? 282 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 167 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 498 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 20 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Control Cable Assembly? 218 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 10 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 25 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 467 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 188 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 103 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 711 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 407 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 18 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 15 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 205 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Helical Gear And Shaft Assembly? 63 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 65 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 190 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 65 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 353 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 27 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 11 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 22 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 97 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 103 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 614 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 82 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 3833 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 134 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 432 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 726 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 32 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 713 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 30 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 6088 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 231 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 3194 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 69 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 3197 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 510 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 1601 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1001 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 89 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 448 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 179 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 40 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 94 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Tension Spring Assembly? 49 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 17 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.

Stock Items From Supply Class 3040 Page 1 of 300

NSN 3040-01-212-5868 012125868 ADAPTER,SPEEDOMETER-TACHOMETER DRIVE

3040-01-212-5868
Speedometer-Tachometer Drive Adapter

012125868
12338430: RNCC: 3 | RNVC: 2
SP-311 .929: RNCC: 5 | RNVC: 2
12338430: RNCC: 5 | RNVC: 2
5584049: RNCC: 5 | RNVC: 9
SP-311: RNCC: 5 | RNVC: 9
2590012125868: RNCC: 6 | RNVC: 9
3040PL0841919: RNCC: 6 | RNVC: 9
5573361-B: RNCC: D | RNVC: 9

14 Jul 1985

NSN 3040-01-186-3718 011863718 CONNECTING LINK,RIGID

3040-01-186-3718
Rigid Connecting Link

011863718
12338323: RNCC: 3 | RNVC: 2
0723224: RNCC: 5 | RNVC: 2
5569941-C: RNCC: 5 | RNVC: 2
EC12338323: RNCC: 5 | RNVC: 9
947130: RNCC: 5 | RNVC: 9
940150: RNCC: 5 | RNVC: 9
5569941: RNCC: 5 | RNVC: 9
3040011863718: RNCC: 5 | RNVC: 9
12338323: RNCC: 5 | RNVC: 9
3040PL0645426: RNCC: 6 | RNVC: 9

10 Aug 1984

3040-00-912-0265
Shouldered Shaft

009120265
11010618: RNCC: 3 | RNVC: 9
116C2708P1: RNCC: 5 | RNVC: 2
116C2708P1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-337-6541
Shouldered Shaft

003376541
8150391: RNCC: 3 | RNVC: 2

28 Oct 1993

3040-00-192-2159
Spur Gearshaft

001922159
291366: RNCC: 3 | RNVC: 2
291366: RNCC: 5 | RNVC: 9

22 Jan 1969

3040-01-128-4255
Linear Actuating Cylinder Head

011284255
1D23084-1: RNCC: 3 | RNVC: 2
1D23084-1: RNCC: 5 | RNVC: 2
1D23084-1: RNCC: 5 | RNVC: 2
10106841: RNCC: 6 | RNVC: 9
1D23084: RNCC: D | RNVC: 9

20 Mar 1982

3040-01-358-8713
Rigid Connecting Link

013588713
17P3A1922-501: RNCC: 3 | RNVC: 2

22 May 1992

NSN 3040-01-410-8054 014108054 CONNECTING LINK,RIGID

3040-01-410-8054
Rigid Connecting Link

014108054
12447178: RNCC: 1 | RNVC: 2
12447178: RNCC: 3 | RNVC: 2
6003174: RNCC: 5 | RNVC: 9
52827-1: RNCC: 5 | RNVC: 9
5342PL0737671: RNCC: 6 | RNVC: 9
52827-1: RNCC: C | RNVC: 1

12 Mar 1995

3040-00-915-5990
Rigid Connecting Link

009155990
C4W1590-5: RNCC: 3 | RNVC: 2
C4W1590-5: RNCC: 5 | RNVC: 9
C4W1590-1: RNCC: E | RNVC: 8

31 Oct 1965

3040-00-073-1026
Rigid Connecting Link

000731026
107P7524-1: RNCC: 3 | RNVC: 2
107P7524-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-190-3846
Rigid Connecting Link

011903846
7514-6008: RNCC: 3 | RNVC: 2
7075-29: RNCC: 5 | RNVC: 2
LE162-0002-6008: RNCC: 5 | RNVC: 2
SR10784A-6008: RNCC: 5 | RNVC: 2
LE162-0002: RNCC: D | RNVC: 9

26 Sep 1984

3040-01-326-8624
Mechanical Drive Housing

013268624
5819851: RNCC: 3 | RNVC: 2

3 Oct 1990

NSN 3040-01-184-4813 011844813 HOUSING,MECHANICAL DRIVE

3040-01-184-4813
Mechanical Drive Housing

011844813
12275790: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-557-6498
Metallic Pipe

015576498
AH39-1 50X25-01: RNCC: 3 | RNVC: 2
R0084298: RNCC: 5 | RNVC: 2
R0084298: RNCC: 7 | RNVC: 2
R0084298-0301: RNCC: D | RNVC: 9

25 Oct 2007

NSN 3040-01-642-2729 016422729 SHAFT,STRAIGHT

3040-01-642-2729
Straight Shaft

016422729
77D616347P001: RNCC: 3 | RNVC: 2
77D616347P001: RNCC: 5 | RNVC: 2
77D616347P1: RNCC: 5 | RNVC: 2
77D616347P001: RNCC: 5 | RNVC: 9
77D616347P1: RNCC: 5 | RNVC: 9

19 Feb 2015

NSN 3040-00-405-1842 004051842 RING,PISTON

3040-00-405-1842
Piston Ring

004051842
6830187: RNCC: 3 | RNVC: 2
2520004051842: RNCC: 5 | RNVC: 9
2520004051842: RNCC: 6 | RNVC: 9

31 Mar 1971

3040-01-539-4911
Idle Arm

015394911
6015229: RNCC: 3 | RNVC: 2

24 Apr 2006

3040-00-382-5911
Shaft Retaining Plate

003825911
655103: RNCC: 3 | RNVC: 2
265850: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 3040-01-422-0139 014220139 INSERTER AND REMOVER,SEAL

3040-01-422-0139
Seal Inserter And Remover

014220139
J-38731-3A: RNCC: 3 | RNVC: 2
J-38731-3: RNCC: 5 | RNVC: 9

20 Nov 1995

NSN 3040-01-422-5406 014225406 PROTECTOR,SEAL RING,SMALL

3040-01-422-5406
Small Seal Ring Protector

014225406
J-38736-2: RNCC: 3 | RNVC: 2

4 Dec 1995

NSN 3040-01-422-0173 014220173 INSERTER AND REMOVER,SEAL

3040-01-422-0173
Seal Inserter And Remover

014220173
J-38731-1A: RNCC: 3 | RNVC: 2
J-38731-1: RNCC: 5 | RNVC: 9

20 Nov 1995

NSN 3040-01-422-1310 014221310 INSTALLER,TRANSMISSION SEAL

3040-01-422-1310
Transmission Seal Installer

014221310
J-38736-1: RNCC: 3 | RNVC: 2

22 Nov 1995

NSN 3040-01-422-5411 014225411 SIZER,TRANSMISSION SEAL

3040-01-422-5411
Transmission Seal Sizer

014225411
J-38736-3: RNCC: 3 | RNVC: 2

4 Dec 1995

NSN 3040-01-366-0780 013660780 CONTROL ASSEMBLY,PUSH-PULL

3040-01-366-0780
Push-Pull Control Assembly

013660780
12351252-4: RNCC: 3 | RNVC: 2
12351252-4: RNCC: 5 | RNVC: 9
12351252: RNCC: D | RNVC: 9

21 Oct 1992

NSN 3040-00-735-4232 007354232 HOUSING,MECHANICAL DRIVE

3040-00-735-4232
Mechanical Drive Housing

007354232
8351654: RNCC: 3 | RNVC: 2
8351654: RNCC: 5 | RNVC: 2
2520007354232: RNCC: 6 | RNVC: 9
3040007354232: RNCC: 6 | RNVC: 9

1 Jan 1963

NSN 3040-00-789-7607 007897607 LEVER,MANUAL CONTROL

3040-00-789-7607
Manual Control Lever

007897607
10896915: RNCC: 3 | RNVC: 2
3040007897607: RNCC: 5 | RNVC: 9

1 Jan 1962

NSN 3040-00-736-0287 007360287 PISTON,LINEAR ACTUATING CYLINDER

3040-00-736-0287
Linear Actuating Cylinder Piston

007360287
8348770: RNCC: 3 | RNVC: 2

1 Jan 1963

NSN 3040-01-354-0406 013540406 SHAFT,SHOULDERED

3040-01-354-0406
Shouldered Shaft

013540406
23506053: RNCC: 3 | RNVC: 2
2HE208: RNCC: 5 | RNVC: 2
2HE208: RNCC: 5 | RNVC: 9

21 Feb 1992

NSN 3040-00-849-2163 008492163 SHAFT,SHOULDERED

3040-00-849-2163
Shouldered Shaft

008492163
5123150: RNCC: 3 | RNVC: 2
001916T: RNCC: 5 | RNVC: 2
K-5123150: RNCC: 5 | RNVC: 2
5123150: RNCC: 5 | RNVC: 9
K-5123150: RNCC: 5 | RNVC: 9
PC5123150: RNCC: 5 | RNVC: 9
3040PL0950591: RNCC: 6 | RNVC: 9

4 Jan 1967

NSN 3040-00-999-7709 009997709 SHAFT,BLOWER DRIVE

3040-00-999-7709
Blower Drive Shaft

009997709
5130295: RNCC: 3 | RNVC: 2
2990009997709: RNCC: 5 | RNVC: 9
K-5130295: RNCC: 5 | RNVC: 9
PC5130295: RNCC: 5 | RNVC: 9
3040009997709: RNCC: 6 | RNVC: 9

21 Mar 1966

NSN 3040-01-413-5999 014135999 BALL JOINT

3040-01-413-5999
Ball Joint

014135999
39006: RNCC: 3 | RNVC: 2
RCSK14735: RNCC: 5 | RNVC: 2
RCSK14735: RNCC: 5 | RNVC: 2

17 May 1995

NSN 3040-01-478-0475 014780475 CYLINDER,ACTUATING,LINEAR

3040-01-478-0475
Linear Actuating Cylinder

014780475
134114-3: RNCC: 3 | RNVC: 2

29 Aug 2000

NSN 3040-01-523-1684 015231684 ACTUATOR,MECHANICAL,NONAIRCRAFT

3040-01-523-1684
Nonaircraft Mechanical Actuator

015231684
0175P-24A3LS1: RNCC: 3 | RNVC: 2
APECS 0175P-24-A3LS1: RNCC: 5 | RNVC: 9

24 Aug 2004

3040-00-702-8667
Brake Shoe

007028667
7028667: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-220-6905
Linear Actuating Cylinder Cap

012206905
S640-56-5593: RNCC: 3 | RNVC: 2
B/S640-56-5593: RNCC: D | RNVC: 9

16 Nov 1985

NSN 3040-00-055-1564 000551564 CAM,CONTROL

3040-00-055-1564
Control Cam

000551564
5116125: RNCC: 3 | RNVC: 2
B5116125: RNCC: 5 | RNVC: 2
PC5116125: RNCC: 5 | RNVC: 9
33033: RNCC: 5 | RNVC: 9
K-5116125: RNCC: 5 | RNVC: 9
5116125: RNCC: 5 | RNVC: 9
2815000551564: RNCC: 6 | RNVC: 9

1 Jan 1963

NSN 3040-01-363-2384 013632384 CASE ASSEMBLY,DIFFERENTIAL

3040-01-363-2384
Differential Case Assembly

013632384
A2-3235H2166: RNCC: 3 | RNVC: 2
A2-3235H2166: RNCC: 5 | RNVC: 2
A2-3235H2166: RNCC: 5 | RNVC: 2
A2-3235H2166: RNCC: 5 | RNVC: 2
3235F2164: RNCC: 5 | RNVC: 9
4-62273 ITEM 25: RNCC: 5 | RNVC: 9
3235F2164: RNCC: 5 | RNVC: 9
4-62273: RNCC: D | RNVC: 9

27 Aug 1992

NSN 3040-01-478-0396 014780396 SHAFT,STRAIGHT

3040-01-478-0396
Straight Shaft

014780396
A7-3761-S-461: RNCC: 3 | RNVC: 2
216548: RNCC: 5 | RNVC: 2

29 Aug 2000

NSN 3040-00-921-6576 009216576 SHAFT,SHOULDERED

3040-00-921-6576
Shouldered Shaft

009216576
5117724: RNCC: 3 | RNVC: 2
K-5117724: RNCC: 5 | RNVC: 9
5162860: RNCC: 5 | RNVC: 9

3 Dec 1965

NSN 3040-01-574-4177 015744177 CYLINDER,HYDRAULIC ACCUMULATOR

3040-01-574-4177
Hydraulic Accumulator Cylinder

015744177
A2-3761-S-461: RNCC: 3 | RNVC: 2

28 May 2009

NSN 3040-00-402-4428 004024428 LEVER,REMOTE CONTROL

3040-00-402-4428
Remote Control Lever

004024428
10865324: RNCC: 3 | RNVC: 2
10865324: RNCC: 5 | RNVC: 2

6 Apr 1970

NSN 3040-01-486-6347 014866347 HOUSING,MECHANICAL DRIVE

3040-01-486-6347
Mechanical Drive Housing

014866347
3926518: RNCC: 3 | RNVC: 2
3926518: RNCC: 5 | RNVC: 2

9 Jul 2001

NSN 3040-01-478-0472 014780472 CYLINDER,ACTUATING,LINEAR

3040-01-478-0472
Linear Actuating Cylinder

014780472
134114-4: RNCC: 3 | RNVC: 2

29 Aug 2000

NSN 3040-01-013-1783 010131783 HOUSING,MECHANICAL DRIVE

3040-01-013-1783
Mechanical Drive Housing

010131783
10935541/1: RNCC: 3 | RNVC: 2
2930010131783: RNCC: 5 | RNVC: 9
3040010131783: RNCC: 6 | RNVC: 9
2930010131783: RNCC: 6 | RNVC: 9

27 Nov 1975

NSN 3040-00-678-3265 006783265 SHAFT,STRAIGHT

3040-00-678-3265
Straight Shaft

006783265
8761020: RNCC: 3 | RNVC: 2
2930006783265: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 3040-01-089-4999 010894999 CONNECTING LINK,RIGID

3040-01-089-4999
Rigid Connecting Link

010894999
11673897-2: RNCC: 3 | RNVC: 2

2 Feb 1980

NSN 3040-01-054-0265 010540265 HOUSING,MECHANICAL DRIVE

3040-01-054-0265
Mechanical Drive Housing

010540265
11684077-1: RNCC: 3 | RNVC: 2
11684077-1: RNCC: 5 | RNVC: 2
11684077-1: RNCC: 5 | RNVC: 2

13 Jan 1978

NSN 3040-00-394-3016 003943016 HOUSING,MECHANICAL DRIVE

3040-00-394-3016
Mechanical Drive Housing

003943016
11684077: RNCC: 3 | RNVC: 2
2815003943016: RNCC: 5 | RNVC: 9
2815003943016: RNCC: 6 | RNVC: 9

8 Apr 1974

NSN 3040-01-519-7683 015197683 HOUSING,MECHANICAL DRIVE

3040-01-519-7683
Mechanical Drive Housing

015197683
12354477: RNCC: 3 | RNVC: 2

30 Apr 2004

NSN 3040-01-519-6392 015196392 HOUSING,MECHANICAL DRIVE

3040-01-519-6392
Mechanical Drive Housing

015196392
12354477-1: RNCC: 3 | RNVC: 2
12354477: RNCC: D | RNVC: 9

27 Apr 2004

NSN 3040-00-736-3580 007363580 HOUSING,MECHANICAL DRIVE

3040-00-736-3580
Mechanical Drive Housing

007363580
8351304: RNCC: 3 | RNVC: 2
8351304: RNCC: 5 | RNVC: 2
3040007363580: RNCC: 6 | RNVC: 9

1 Jan 1963

NSN 3040-00-678-4233 006784233 SHAFT,SHOULDERED

3040-00-678-4233
Shouldered Shaft

006784233
8761440: RNCC: 3 | RNVC: 2
8761440: RNCC: 5 | RNVC: 2
8761440: RNCC: 5 | RNVC: 2
2815006784233: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 3040-00-861-1447 008611447 GEARSHAFT,SPUR

3040-00-861-1447
Spur Gearshaft

008611447
10898779: RNCC: 3 | RNVC: 2
10898779: RNCC: 5 | RNVC: 2
10898779: RNCC: 5 | RNVC: 2
10898779: RNCC: 5 | RNVC: 9
3040008611447: RNCC: 5 | RNVC: 9
3040008611447: RNCC: 6 | RNVC: 9

1 Jan 1962

NSN 3040-01-478-0598 014780598 SHAFT,SHOULDERED

3040-01-478-0598
Shouldered Shaft

014780598
216198: RNCC: 3 | RNVC: 2
915878-0916: RNCC: 5 | RNVC: 2

29 Aug 2000

NSN 3040-00-697-4789 006974789 GEARSHAFT,SPUR

3040-00-697-4789
Spur Gearshaft

006974789
5181746: RNCC: 3 | RNVC: 2
K-5181746: RNCC: 5 | RNVC: 9
PC5181746: RNCC: 5 | RNVC: 9
5181746A: RNCC: 5 | RNVC: 9
5181746: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 3040-00-690-1597 006901597 PROPELLER SHAFT,NONVEHICULAR

3040-00-690-1597
Nonvehicular Propeller Shaft

006901597
8756332: RNCC: 3 | RNVC: 2
2520006901597: RNCC: 5 | RNVC: 9
3040PL1483358: RNCC: 6 | RNVC: 9

1 Jan 1963

NSN 3040-00-921-5339 009215339 BRACKET,EYE,NONROTATING SHAFT

3040-00-921-5339
Nonrotating Shaft Eye Bracket

009215339
5116128: RNCC: 3 | RNVC: 2
B5116128: RNCC: 5 | RNVC: 2
K-5116128: RNCC: 5 | RNVC: 9
5116128: RNCC: 5 | RNVC: 9
PC5116128: RNCC: 5 | RNVC: 9
5116128: RNCC: 8 | RNVC: 2

3 Nov 1965

NSN 3040-00-089-6455 000896455 WEIGHT,COUNTERBALANCE

3040-00-089-6455
Counterbalance Weight

000896455
5122771: RNCC: 3 | RNVC: 2
PC5122771: RNCC: 5 | RNVC: 9
5122771: RNCC: 5 | RNVC: 9
5122771: RNCC: 8 | RNVC: 2

5 Jul 1967

NSN 3040-01-255-0950 012550950 BRACKET,EYE,ROTATING SHAFT

3040-01-255-0950
Rotating Shaft Eye Bracket

012550950
23501136: RNCC: 3 | RNVC: 2
8925276: RNCC: 5 | RNVC: 9
8925276-ND: RNCC: 5 | RNVC: 9

15 May 1987

NSN 3040-00-921-5345 009215345 SHAFT,STRAIGHT

3040-00-921-5345
Straight Shaft

009215345
5116418: RNCC: 3 | RNVC: 2
FP-5116418: RNCC: 5 | RNVC: 2
B5116418: RNCC: 5 | RNVC: 9
3040009215345: RNCC: 5 | RNVC: 9
PC5116418: RNCC: 5 | RNVC: 9
2815009215345: RNCC: 5 | RNVC: 9
K-5116418: RNCC: 5 | RNVC: 9
5116418: RNCC: 8 | RNVC: 2

3 Nov 1965

3040-00-921-5357
Body Hub

009215357
5124458: RNCC: 3 | RNVC: 2
B5124458: RNCC: 5 | RNVC: 2
3040009215357: RNCC: 5 | RNVC: 9
5124458: RNCC: 5 | RNVC: 9
5124458: RNCC: 5 | RNVC: 9
K-5124458: RNCC: 5 | RNVC: 9
PC5124458: RNCC: 5 | RNVC: 9
5124458: RNCC: 8 | RNVC: 2
5124458: RNCC: 8 | RNVC: 2

25 Dec 1965

NSN 3040-01-235-5038 012355038 WEIGHT,COUNTERBALANCE

3040-01-235-5038
Counterbalance Weight

012355038
8926005: RNCC: 3 | RNVC: 2

30 Jun 1986

NSN 3040-00-780-5252 007805252 CONNECTING LINK,RIGID

3040-00-780-5252
Rigid Connecting Link

007805252
5121452: RNCC: 3 | RNVC: 2
B5121452: RNCC: 5 | RNVC: 2
K-5121452: RNCC: 5 | RNVC: 9
5121452: RNCC: 5 | RNVC: 9
PC5121452: RNCC: 5 | RNVC: 9
2990007805252: RNCC: 5 | RNVC: 9
5121452: RNCC: 8 | RNVC: 2

1 Jan 1962

NSN 3040-00-157-3650 001573650 SHAFT,SHOULDERED,XTG-411

3040-00-157-3650
Xtg-411 Shouldered Shaft

001573650
8351268: RNCC: 3 | RNVC: 2

28 May 1970

NSN 3040-00-157-3651 001573651 SHAFT,SHOULDERED,XTG-411

3040-00-157-3651
Xtg-411 Shouldered Shaft

001573651
8351269: RNCC: 3 | RNVC: 2

28 May 1970

3040-00-999-2352
Body Hub

009992352
5125774: RNCC: 3 | RNVC: 2
2910009992352: RNCC: 6 | RNVC: 9
5125774: RNCC: 8 | RNVC: 2

18 Apr 1966

NSN 3040-00-780-5251 007805251 CONNECTING LINK,RIGID

3040-00-780-5251
Rigid Connecting Link

007805251
5121472: RNCC: 3 | RNVC: 2
B5121472: RNCC: 5 | RNVC: 2
5121472: RNCC: 5 | RNVC: 9
2990007805251: RNCC: 5 | RNVC: 9
3040007805251: RNCC: 5 | RNVC: 9
K-5121472: RNCC: 5 | RNVC: 9
PC5121472: RNCC: 5 | RNVC: 9
5121472: RNCC: 8 | RNVC: 2

1 Jan 1962

NSN 3040-00-440-3332 004403332 PITOT ASSY,TRANSMISSION,TX100

3040-00-440-3332
Tx100 Transmission Pitot Assy

004403332
23046477: RNCC: 3 | RNVC: 2
10910272: RNCC: 5 | RNVC: 2
3040004403332: RNCC: 5 | RNVC: 9
2520004403332: RNCC: 5 | RNVC: 9
6769527: RNCC: 5 | RNVC: 9
23017948: RNCC: 5 | RNVC: 9
23046477: RNCC: 5 | RNVC: 9
6769527: RNCC: 5 | RNVC: 9
3040004403332: RNCC: 6 | RNVC: 9
2520004403332: RNCC: 6 | RNVC: 9

1 Jan 1963

NSN 3040-00-903-0908 009030908 SHAFT,BLOWER DRIVE

3040-00-903-0908
Blower Drive Shaft

009030908
5135876: RNCC: 3 | RNVC: 2
FP5135876: RNCC: 5 | RNVC: 2
B5135876: RNCC: 5 | RNVC: 2
5135876: RNCC: 5 | RNVC: 9
2990009030908: RNCC: 5 | RNVC: 9
K5135876: RNCC: 5 | RNVC: 9
3040009030908: RNCC: 5 | RNVC: 9
3040PL0895782: RNCC: 6 | RNVC: 9
5135876: RNCC: 8 | RNVC: 2

1 Jan 1960

NSN 3040-00-996-0716 009960716 HOUSING,MECHANICAL DRIVE

3040-00-996-0716
Mechanical Drive Housing

009960716
10918160: RNCC: 3 | RNVC: 2
2530009960716: RNCC: 5 | RNVC: 9
2530009960716: RNCC: 6 | RNVC: 9
10918160: RNCC: 8 | RNVC: 2

1 Jan 1962

NSN 3040-00-936-8284 009368284 XTG-411 TRANSFER CASE HOUSING

3040-00-936-8284
Xtg-411 Transfer Case Housing

009368284
8351293: RNCC: 3 | RNVC: 2
3040009368284: RNCC: 5 | RNVC: 9

10 Mar 1967

NSN 3040-01-329-2189 013292189 CYLINDER ASSEMBLY,ACTUATING

3040-01-329-2189
Actuating Cylinder Assembly

013292189
CJ69D0708: RNCC: 3 | RNVC: 2
122605027: RNCC: 5 | RNVC: 2
NKMZ.306446.001: RNCC: 5 | RNVC: 2
122605027: RNCC: 5 | RNVC: 9
3040PL0883528: RNCC: 6 | RNVC: 9
3040013292189: RNCC: 6 | RNVC: 9
7532461-1: RNCC: 7 | RNVC: 2
7532461-1: RNCC: 8 | RNVC: 2

13 Nov 1990

NSN 3040-00-764-5087 007645087 LEVER,MANUAL CONTROL

3040-00-764-5087
Manual Control Lever

007645087
7645087: RNCC: 3 | RNVC: 2
7645087: RNCC: 5 | RNVC: 9
1240007645087: RNCC: 6 | RNVC: 9

1 Jan 1962

NSN 3040-00-692-4152 006924152 PLATE,RETAINING,SHAFT

3040-00-692-4152
Shaft Retaining Plate

006924152
5172734: RNCC: 3 | RNVC: 2
1DD423: RNCC: 5 | RNVC: 2
1DD423: RNCC: 5 | RNVC: 9
LA997-7: RNCC: 5 | RNVC: 9
PC5172734: RNCC: 5 | RNVC: 9
2815006924152: RNCC: 5 | RNVC: 9
5172734: RNCC: 5 | RNVC: 9
3040006924152: RNCC: 5 | RNVC: 9
5172734: RNCC: 5 | RNVC: 9
5172734: RNCC: 5 | RNVC: 9

1 Jan 1961

NSN 3040-01-457-0461 014570461 SHAFT,DRIVE,FLEXIBLE

3040-01-457-0461
Flexible Drive Shaft

014570461
12976082: RNCC: 1 | RNVC: 2
12976082-2: RNCC: 3 | RNVC: 2
12976082-2: RNCC: 3 | RNVC: 2
FALOC50BZ1: RNCC: 5 | RNVC: 2

9 Jul 1998

NSN 3040-01-633-2671 016332671 SHAFT,SHOULDERED

3040-01-633-2671
Shouldered Shaft

016332671
12542299: RNCC: 3 | RNVC: 2

17 Nov 2014

NSN 3040-01-314-8332 013148332 HOUSING,MECHANICAL DRIVE BRADLEY M2 M3 HMPT-500

3040-01-314-8332
Mechanical Drive Bradley M2 M3 Hmpt-500 Housing

013148332
12364215: RNCC: 3 | RNVC: 2

6 Feb 1990

NSN 3040-01-534-9054 015349054 CARRIER ASSEMBLY SET BRADLEY M2 M3

3040-01-534-9054
Carrier Assembly Set Bradley M2 M3

015349054
12446518: RNCC: 3 | RNVC: 2

8 Nov 2005

NSN 3040-01-106-8078 011068078 BELL CRANK

3040-01-106-8078
Bell Crank

011068078
12297135: RNCC: 3 | RNVC: 2

25 Jan 1981

NSN 3040-00-432-1777 004321777 DISC,BRAKE

3040-00-432-1777
Brake Disc

004321777
2584158: RNCC: 3 | RNVC: 2
2584158: RNCC: 3 | RNVC: 2
2584158: RNCC: 5 | RNVC: 2
2584158: RNCC: 5 | RNVC: 9

3 May 1971

NSN 3040-00-055-1583 000551583 SHAFT,STRAIGHT

3040-00-055-1583
Straight Shaft

000551583
5116072: RNCC: 3 | RNVC: 2
B5116072: RNCC: 5 | RNVC: 2
5116072: RNCC: 5 | RNVC: 9
PC5116072: RNCC: 5 | RNVC: 9
K-5116072: RNCC: 5 | RNVC: 9
33029: RNCC: 5 | RNVC: 9
5116072: RNCC: 5 | RNVC: 9
3040000551583: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-01-644-9696
Straight Shaft

016449696
7383858-H5470249-0233: RNCC: 3 | RNVC: 1
H547-0249-233: RNCC: 5 | RNVC: 1
167-7106787-233: RNCC: 5 | RNVC: 1
H547-0001-H5470249-0233: RNCC: 5 | RNVC: 1
H574-0001-H5470249-0233: RNCC: 5 | RNVC: 1
7383858-H5470249-0233D4: RNCC: 5 | RNVC: 2
H547-0249-233D4: RNCC: 5 | RNVC: 2
167-7106787-233D4: RNCC: 5 | RNVC: 2
H547-0001-H5470249-0233D4: RNCC: 5 | RNVC: 2
H574-0001-H5470249-0233D4: RNCC: 5 | RNVC: 2

29 May 2015

3040-01-644-9730
Straight Shaft

016449730
7383858-H5470249-0239: RNCC: 3 | RNVC: 1
H547-0249-239: RNCC: 5 | RNVC: 1
H574-0001-H5470249-0239: RNCC: 5 | RNVC: 1
167-7106787-239: RNCC: 5 | RNVC: 1
H547-0001-H5470249-0239: RNCC: 5 | RNVC: 1
H547-0001-H5470249-0239D4: RNCC: 5 | RNVC: 2
H547-0249-239D4: RNCC: 5 | RNVC: 2
H574-0001-H5470249-0239D4: RNCC: 5 | RNVC: 2
167-7106787-239D4: RNCC: 5 | RNVC: 2
7383858-H5470249-0239D4: RNCC: 5 | RNVC: 2

29 May 2015

3040-01-683-8674
Power Transmission Components Boot

016838674
NC3030 4: RNCC: 3 | RNVC: 2
M1502-871010: RNCC: 6 | RNVC: 9

10 Oct 2019

3040-01-680-5134
Straight Shaft Assembly

016805134
4470304: RNCC: 3 | RNVC: 2
470304: RNCC: 3 | RNVC: 9
924125 401: RNCC: 5 | RNVC: 2

8 May 2019

3040-01-644-9285
Straight Shaft

016449285
7383858-H5470249-0204: RNCC: 3 | RNVC: 1
H547-0001-H5470249-0204: RNCC: 5 | RNVC: 1
H547-0249-204: RNCC: 5 | RNVC: 1
H574-0001-H5470249-0204: RNCC: 5 | RNVC: 1
167-7106787-204: RNCC: 5 | RNVC: 1
167-7106787-204D4: RNCC: 5 | RNVC: 2
7383858-H5470249-0204D4: RNCC: 5 | RNVC: 2
H547-0001-H5470249-0204D4: RNCC: 5 | RNVC: 2
H547-0249-204D4: RNCC: 5 | RNVC: 2
H574-0001-H5470249-0204D4: RNCC: 5 | RNVC: 2

27 May 2015

3040-01-631-8073
Mechanical Drive Housing Part

016318073
8M0102481: RNCC: 3 | RNVC: 2
8M0078253: RNCC: 5 | RNVC: 9

25 Sep 2014

3040-01-641-9958
Shouldered Shaft

016419958
123-8180878 ITEM 11, 20 AND 21: RNCC: 3 | RNVC: 1
123-8180878 ITEM 20: RNCC: 5 | RNVC: 1
36-37-7422KS: RNCC: 5 | RNVC: 1
123-8180878 ITEM 11: RNCC: 5 | RNVC: 1
123-8180878 ITEM 21: RNCC: 5 | RNVC: 1
123-8180878 ITEM 20L1: RNCC: 5 | RNVC: 2
36-37-7422KSL1: RNCC: 5 | RNVC: 2
123-8180878 ITEM 11, 20 AND 21L1: RNCC: 5 | RNVC: 2
123-8180878 ITEM 11L1: RNCC: 5 | RNVC: 2
123-8180878 ITEM 21L1: RNCC: 5 | RNVC: 2

10 Feb 2015

3040-00-343-7369
Shaft Collar

003437369
AD14S43-016ALT1PC1: RNCC: 3 | RNVC: 2
AD14S43-016ALT1PH60KMW40310: RNCC: 3 | RNVC: 2
AD14S43-018ALT1PC1: RNCC: 3 | RNVC: 2
AD14S43-018ALT1PH60KMW40310: RNCC: 3 | RNVC: 2
AD14S43-15ALT5PC1: RNCC: 3 | RNVC: 2
AD14S43-15ALT5PCH60KMW40310: RNCC: 3 | RNVC: 2
AD14S43-17ALT4PC1: RNCC: 3 | RNVC: 2
AD14S43-17ALT4PCH60KMW40310: RNCC: 3 | RNVC: 2
AD32S4200-741259H60KMW40310: RNCC: 3 | RNVC: 2
AD32S4200-741259PC1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-461-8556
Linear Actuating Cylinder Assembly

014618556
1 H2H0A00116732: RNCC: 3 | RNVC: 2
1.50CF/H-2HLTVS13CX82.000: RNCC: 5 | RNVC: 9
5038017: RNCC: 5 | RNVC: 9
1H2H0A00278817: RNCC: 5 | RNVC: 9
AG189982D0: RNCC: 5 | RNVC: 9

7 Jan 1999

3040-01-546-7949
Shaftzzzzzzzzzzzzzz

015467949
7550477-G5472100-0313: RNCC: 3 | RNVC: 1
7384566 PN 313: RNCC: 5 | RNVC: 1
G547-0001-G5472100-0313: RNCC: 5 | RNVC: 1
G547-2100 PN 313: RNCC: 5 | RNVC: 1
G5472100-0313: RNCC: 5 | RNVC: 1
7550477-G5470001-0313: RNCC: 5 | RNVC: 1
G547-0001-G5472100-0313L1: RNCC: 5 | RNVC: 2
G547-2100 PN 313L1: RNCC: 5 | RNVC: 2
7384566 PN 313L1: RNCC: 5 | RNVC: 2
7550477-G5472100-0313L1: RNCC: 5 | RNVC: 2

3 Jan 2007

3040-01-520-3571
Rigid Connecting Link

015203571
423R3558-15: RNCC: 3 | RNVC: 2
423R3558-7: RNCC: E | RNVC: 8

10 May 2004

3040-01-391-9804
Shouldered Shaft

013919804
512-6404652 FIND 125: RNCC: 3 | RNVC: 1
512-6404652 FIND 3L1: RNCC: 5 | RNVC: 1
512-6404652 FIND 125L1: RNCC: 5 | RNVC: 1
512-6404653-33L1: RNCC: 5 | RNVC: 1
512-6404652 FIND 3: RNCC: 5 | RNVC: 1
512-6404652 FN 126L1: RNCC: 5 | RNVC: 1
512-6404652 FIND 127: RNCC: 5 | RNVC: 1
512-6404653 FIND 33: RNCC: 5 | RNVC: 1
512-6404652 FIND 127L1: RNCC: 5 | RNVC: 1
512-6404653 FIND 33L1: RNCC: 5 | RNVC: 1

21 Jun 1994

3040-01-412-7613
Linear Actuating Cylinder Assembly

014127613
LR5BL-8.00X10.00-N-1.38-1M-S-X--: RNCC: 3 | RNVC: 1
LR5BL-8.00X10.00-N-1.38-1M-S-X-X: RNCC: 3 | RNVC: 1
RE-014127613: RNCC: 5 | RNVC: 1
LR5BLX8X10: RNCC: 5 | RNVC: 9
R5BLX8X10: RNCC: 5 | RNVC: 9
1Q8901-0010-01A: RNCC: 5 | RNVC: 9

27 Apr 1995

3040-00-250-0840
Linear Actuating Cylinder Piston Rod

002500840
LT1-661: RNCC: 3 | RNVC: 9
P69633: RNCC: 5 | RNVC: 9

21 Feb 1969

3040-00-392-5549
Ball Joint

003925549
B3372-121: RNCC: 3 | RNVC: 2
SMB133069: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-369-0633
Remote Control Lever

003690633
3160646-1: RNCC: 3 | RNVC: 2
3160646-1: RNCC: 5 | RNVC: 9

3 Mar 1974

3040-00-420-6476
Shouldered Shaft

004206476
255201-4: RNCC: 3 | RNVC: 2
255201-4: RNCC: 3 | RNVC: 9
513P: RNCC: 5 | RNVC: 2
SL5200PC11: RNCC: 5 | RNVC: 9
SL6022PC11: RNCC: 5 | RNVC: 9
SL6023PC11: RNCC: 5 | RNVC: 9
513P: RNCC: 5 | RNVC: 9
SL5201PC11: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-299-1072
Pawl

002991072
179167PC5: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-917-4217
Hub Clamp

009174217
SC313DG60: RNCC: 3 | RNVC: 2
C64: RNCC: 5 | RNVC: 2
10669696: RNCC: 5 | RNVC: 2
M143-234: RNCC: 5 | RNVC: 9
42-P30088L001: RNCC: 5 | RNVC: 9
932422-5: RNCC: 7 | RNVC: 2
320006-1: RNCC: 7 | RNVC: 2
529260C90018-04: RNCC: C | RNVC: 1
CG1-12: RNCC: C | RNVC: 1
DL43: RNCC: C | RNVC: 1

27 Jul 1966

3040-00-109-5505
Straight Shaft

001095505
2239222: RNCC: 3 | RNVC: 2

9 Aug 1968

3040-00-385-2905
Straight Shaft

003852905
64A81B64-1: RNCC: 3 | RNVC: 2

25 Mar 1974

3040-00-432-2704
Hydraulic Accumulator

004322704
3285043-1: RNCC: 3 | RNVC: 2

4 Feb 1972

3040-00-479-9360
Linear Actuating Cylinder Assembly

004799360
5604917-505: RNCC: 3 | RNVC: 2

26 Aug 1970

3040-01-525-4440
Mechanical Drive Housing

015254440
626-0394: RNCC: 3 | RNVC: 2
190-5166: RNCC: 5 | RNVC: 9
236-2216: RNCC: 5 | RNVC: 9

9 Nov 2004

3040-01-644-9894
Locking Cast Pinion

016449894
7383858-H5470249-0243: RNCC: 3 | RNVC: 1
H574-0001-H5470249-0243: RNCC: 5 | RNVC: 1
H547-0001-H5470249-0243: RNCC: 5 | RNVC: 1
H547-0249-243: RNCC: 5 | RNVC: 1
167-7106787-243: RNCC: 5 | RNVC: 1
167-7106787-243D4: RNCC: 5 | RNVC: 2
7383858-H5470249-0243D4: RNCC: 5 | RNVC: 2
H574-0001-H5470249-0243D4: RNCC: 5 | RNVC: 2
H547-0001-H5470249-0243D4: RNCC: 5 | RNVC: 2
H547-0249-243D4: RNCC: 5 | RNVC: 2

29 May 2015

3040-01-641-7359
Worm Shaft

016417359
7550479-DF331473-0046: RNCC: 3 | RNVC: 1
DF331473 FIND 46: RNCC: 5 | RNVC: 1
DF331473-0046: RNCC: 5 | RNVC: 1
H547-0001-DF331473-0046: RNCC: 5 | RNVC: 1
7383858-DF331473-0046: RNCC: 5 | RNVC: 1
801-6406768 FIND 46: RNCC: 5 | RNVC: 1
211087674: RNCC: 5 | RNVC: 1
G547-0003-DF331473-0046: RNCC: 5 | RNVC: 1
7383858-DF331473-0046D4: RNCC: 5 | RNVC: 2
7550479-DF331473-0046D4: RNCC: 5 | RNVC: 2

30 Jan 2015

3040-01-375-3755
Spur Gearshaft

013753755
12706: RNCC: 3 | RNVC: 2
12706: RNCC: 3 | RNVC: 2
12706: RNCC: 5 | RNVC: 2
12706: RNCC: 5 | RNVC: 2
6HE93: RNCC: 7 | RNVC: 2

8 May 1993

3040-01-644-9476
Bevel Gearshaft

016449476
7383858-H5470249-0228: RNCC: 3 | RNVC: 1
167-7106787-228: RNCC: 5 | RNVC: 1
H547-0001-H5470249-0228: RNCC: 5 | RNVC: 1
H574-0001-H5470249-0228: RNCC: 5 | RNVC: 1
H547-0249-228: RNCC: 5 | RNVC: 1
H547-0001-H5470249-0228D4: RNCC: 5 | RNVC: 2
H574-0001-H5470249-0228D4: RNCC: 5 | RNVC: 2
H547-0249-228D4: RNCC: 5 | RNVC: 2
167-7106787-228D4: RNCC: 5 | RNVC: 2
7383858-H5470249-0228D4: RNCC: 5 | RNVC: 2

28 May 2015

3040-01-549-3730
Linear Actuating Cylinder Assembly

015493730
91743379: RNCC: 3 | RNVC: 2
384240A1: RNCC: 5 | RNVC: 9
87384876: RNCC: 5 | RNVC: 9

19 Mar 2007

3040-00-394-8448
Turbine Shaft

003948448
4954: RNCC: 3 | RNVC: 2
M-4954: RNCC: 5 | RNVC: 2
D15-496EPC527T0531-574: RNCC: 5 | RNVC: 9
D15-665JPC527T0577: RNCC: 5 | RNVC: 9
D15-617EPC527T0531-574: RNCC: 5 | RNVC: 9
D15-543LPC527T0531-574: RNCC: 5 | RNVC: 9
D15-633NPC527T0531-574: RNCC: 5 | RNVC: 9
D15-543EPC527T0531-574: RNCC: 5 | RNVC: 9
D15-496APC527T0531-574: RNCC: 5 | RNVC: 9
D15-665KPC527T0531-574: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-110-8666
Shouldered Shaft

011108666
0N260267: RNCC: 3 | RNVC: 2

7 Apr 1981

3040-01-122-6159
Ball Joint

011226159
3837094: RNCC: 3 | RNVC: 2
3514954: RNCC: 5 | RNVC: 9
3837092: RNCC: 5 | RNVC: 9

26 Nov 1981

3040-01-129-5724
Inertia Damper

011295724
13040298: RNCC: 3 | RNVC: 2
13040298: RNCC: 5 | RNVC: 1

8 Apr 1982

3040-01-103-9709
Pawl

011039709
3925409-1: RNCC: 3 | RNVC: 2

23 Nov 1980

3040-00-649-6867
Shaft Retaining Plate

006496867
9085628: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-772-0144
Linear Actuating Cylinder

007720144
9028359: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-033-7086
Pawl

010337086
361AS149: RNCC: 3 | RNVC: 2
361AS149: RNCC: 5 | RNVC: 9

8 Jan 1977

3040-00-061-0799
Hub Clamp

000610799
CG112: RNCC: 3 | RNVC: 2
C75: RNCC: 3 | RNVC: 2
YC15-2S: RNCC: 5 | RNVC: 2
10179123-2: RNCC: 5 | RNVC: 2
P1753-1: RNCC: 5 | RNVC: 2
321794-2: RNCC: 5 | RNVC: 2
10539417: RNCC: 5 | RNVC: 2
7527335P2: RNCC: 5 | RNVC: 9
7527335P0002: RNCC: 5 | RNVC: 9
321794-2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-244-2226
Piston Ring

002442226
RNG-1584: RNCC: 3 | RNVC: 2
025-0002-00: RNCC: 5 | RNVC: 9
025000200: RNCC: 5 | RNVC: 9
4R48-024: RNCC: 5 | RNVC: 9

12 Mar 1971

3040-00-800-2869
Hydraulic Accumulator

008002869
8002869: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-270-3480
Piston Ring

002703480
2180797: RNCC: 3 | RNVC: 9
7001963: RNCC: 5 | RNVC: 2
N10985: RNCC: 5 | RNVC: 9
EX3267: RNCC: 5 | RNVC: 9
2180797: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-529-8202
Guidezspringzlwrzzz

015298202
H547-0001-28522001113-23: RNCC: 3 | RNVC: 1
G547-0002-2852-2001-13-23: RNCC: 3 | RNVC: 1
2852-2001-13-23: RNCC: 3 | RNVC: 1
7550478-2852-2001-13-23: RNCC: 3 | RNVC: 2
7383858-28522001113-23D4: RNCC: 3 | RNVC: 2
7550478-2852-2001-13-23D4: RNCC: 3 | RNVC: 2
7383858-28522001113-23: RNCC: 3 | RNVC: 2
7550478-2852200111A-23D4: RNCC: 3 | RNVC: 2
2852-2001-11 ITEM 23: RNCC: 5 | RNVC: 1
2852200111A-23: RNCC: 5 | RNVC: 1

3 May 2005

3040-00-801-2699
Ball Joint

008012699
SS1002: RNCC: 3 | RNVC: 2
B08400-07: RNCC: 5 | RNVC: 2
211938: RNCC: 5 | RNVC: 2
B08400-07: RNCC: 5 | RNVC: 2
13593FX: RNCC: 5 | RNVC: 2
PS183429015209: RNCC: 5 | RNVC: 2
A29104: RNCC: 5 | RNVC: 9
2571610: RNCC: 5 | RNVC: 9
13593FX: RNCC: 5 | RNVC: 9
SS-1002-CP: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-630-4525
Backup Shoe

006304525
585-515-1716541REVAITEM18: RNCC: 3 | RNVC: 2
26-9-2017: RNCC: 3 | RNVC: 2
585-700-1716543REVAITEM17: RNCC: 5 | RNVC: 2
586-209-1720844REVALINE5: RNCC: 5 | RNVC: 2
586-515-1720856REVALINE5: RNCC: 5 | RNVC: 2
26-10-2174REVAITEM17: RNCC: 5 | RNVC: 9
26-10-2175REVAPC17: RNCC: 5 | RNVC: 9
26-10-2352REVAITEM17: RNCC: 5 | RNVC: 9
26-10-2362REVALINE5: RNCC: 5 | RNVC: 9
26-10-2365REVALINE5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-195-4125
Linear Actuating Cylinder Assembly

011954125
3236447-7: RNCC: 3 | RNVC: 2
3236447-6: RNCC: 5 | RNVC: 9
3236447-7: RNCC: 5 | RNVC: 9

28 Nov 1984

NSN 3040-00-175-7153 001757153 RING,PISTON

3040-00-175-7153
Piston Ring

001757153
8914194: RNCC: 3 | RNVC: 9
8914194: RNCC: C | RNVC: 1

3 Dec 1971

3040-01-129-1468
Remote Control Lever

011291468
5122744: RNCC: 3 | RNVC: 2

1 Apr 1982

3040-00-181-1631
Rudder Control Tube

1 Jan 1963

3040-01-104-5818
Linear Actuating Cylinder

011045818
3900148: RNCC: 3 | RNVC: 9
1456: RNCC: 5 | RNVC: 9
3900148: RNCC: C | RNVC: 1

6 Dec 1980

3040-01-126-8752
Inertia Damper

011268752
13040343: RNCC: 3 | RNVC: 2
13040343: RNCC: 5 | RNVC: 1

18 Feb 1982

3040-01-633-7089
Flexible Core End Fitting

016337089
218036946A: RNCC: 3 | RNVC: 2
ACN LE-T40-8168: RNCC: 5 | RNVC: 9

2 Dec 2014

3040-00-058-9833
Straight Shaft

000589833
SHF102: RNCC: 3 | RNVC: 2
SHF102: RNCC: 5 | RNVC: 9
5HF102: RNCC: 5 | RNVC: 9

22 May 1968

3040-01-277-7653
Nonrotating Shaft Eye Bracket

012777653
2304268: RNCC: 3 | RNVC: 2
2304268: RNCC: 3 | RNVC: 9

27 Apr 1988

3040-00-185-3480
Hydraulic Accumulator

001853480
20A11513-102-14: RNCC: 3 | RNVC: 2
895273-03: RNCC: 5 | RNVC: 9

12 Feb 1971

3040-01-465-6567
Tr Adapter Assembly

014656567
A02D2255-4: RNCC: 3 | RNVC: 2
A02D2255: RNCC: D | RNVC: 9

17 Jun 1999

3040-00-868-7121
Piston Ring

008687121
S1007-52: RNCC: 3 | RNVC: 9

23 Oct 1967

3040-00-468-0208
Straight Shaft

004680208
64A81B63-1: RNCC: 3 | RNVC: 2

7 Jun 1974

3040-01-054-2159
Remote Control Lever

010542159
12295: RNCC: 3 | RNVC: 2

17 Jan 1978

3040-01-067-5737
Brake Band Assembly

010675737
215N135F2: RNCC: 3 | RNVC: 2

3 Nov 1978

3040-01-647-5629
Rigid Connecting Link

016475629
3867AS310-1: RNCC: 3 | RNVC: 2

25 Aug 2015

3040-01-652-2843
Straight Shaft

016522843
8935-60: RNCC: 3 | RNVC: 2

17 Feb 2016

3040-01-212-5271
Shouldered Shaft

012125271
8262034: RNCC: 3 | RNVC: 2

12 Jul 1985

3040-01-228-7318
Linear Actuating Cylinder Assembly

012287318
R023962-141: RNCC: 3 | RNVC: 2
14100-304-71: RNCC: 3 | RNVC: 2
R023962-61: RNCC: 5 | RNVC: 9

20 Mar 1986

3040-01-103-4006
Piston Ring

011034006
X78-8-437: RNCC: 3 | RNVC: 2
X78-2-437: RNCC: 5 | RNVC: 9

12 Nov 1980

3040-01-103-4004
Piston Ring

011034004
X78-6-25: RNCC: 3 | RNVC: 2

12 Nov 1980

3040-01-103-4003
Piston Ring

011034003
X78-5-25: RNCC: 3 | RNVC: 2

12 Nov 1980

3040-01-184-2273
Remote Control Lever

011842273
ST1336: RNCC: 3 | RNVC: 2
5T1336: RNCC: 3 | RNVC: 2

17 Jul 1984

3040-01-137-0771
Pawl

011370771
307-55-21: RNCC: 3 | RNVC: 2

20 Aug 1982

3040-00-912-0750
Turbine Engine Counter Balance Weight

009120750
528490CL8: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-01-147-8769
Extension Shaft

011478769
384-1408-00: RNCC: 3 | RNVC: 2

24 Feb 1983

3040-01-103-4005
Piston Ring

011034005
X78-7-25: RNCC: 3 | RNVC: 2

12 Nov 1980

3040-00-601-4510
Counterbalance Weight

006014510
940-129: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-01-200-5088
Counterbalance Weight

012005088
3088-2: RNCC: 3 | RNVC: 2

5 Feb 1985

3040-01-199-3140
Body Hub

011993140
1210C1305-1: RNCC: 3 | RNVC: 2
1210C1305-1: RNCC: 5 | RNVC: 9
1210C1305: RNCC: D | RNVC: 9

19 Jan 1985

3040-00-887-7016
Linear Actuating Cylinder Assembly

008877016
337088: RNCC: 3 | RNVC: 2
337088: RNCC: 5 | RNVC: 9

5 May 1972

3040-00-957-3812
Shouldered Shaft

009573812
M71002630: RNCC: 3 | RNVC: 2
RNG1296: RNCC: 3 | RNVC: 2
RNG1296: RNCC: 5 | RNVC: 9
RNG1296: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-194-9995
Remote Control Lever

001949995
222480: RNCC: 3 | RNVC: 2
007222480: RNCC: 5 | RNVC: 2
222480: RNCC: 5 | RNVC: 9
007222480: RNCC: 5 | RNVC: 9

10 Jun 1970

3040-00-508-2340
Shouldered Shaft

005082340
810933: RNCC: 3 | RNVC: 2
7966638: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-508-2351
Shouldered Shaft

005082351
810928: RNCC: 3 | RNVC: 2
7966637: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-067-5736
Brake Band Assembly

010675736
215N134F2: RNCC: 3 | RNVC: 2

3 Nov 1978

3040-01-483-6833
Differential Gear Unit

014836833
5D9-03274: RNCC: 3 | RNVC: 2
3075AS145-1: RNCC: 5 | RNVC: 2

5 Apr 2001

3040-01-160-8290
Linear Actuating Cylinder Piston

011608290
340 0565: RNCC: 3 | RNVC: 2
2AW848: RNCC: 5 | RNVC: 9
2AW848: RNCC: C | RNVC: 1

27 Aug 1983

3040-01-103-9708
Pawl

011039708
3924338-1: RNCC: 3 | RNVC: 2

23 Nov 1980

3040-01-122-6160
Ball Joint

011226160
3837095: RNCC: 3 | RNVC: 2
3837093: RNCC: 5 | RNVC: 9

26 Nov 1981

3040-01-110-1871
Shouldered Shaft

011101871
0N260264: RNCC: 3 | RNVC: 2

27 Mar 1981

3040-00-925-0510
Straight Shaft

009250510
SHF117: RNCC: 3 | RNVC: 2
C4430-3031-9: RNCC: 5 | RNVC: 2

26 Jan 1966

3040-00-503-0018
Extension Shaft

005030018
534: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-912-0748
Turbine Engine Counter Balance Weight

009120748
528490CL6: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-099-9249
Hydraulic Accumulator

000999249
3285043-2: RNCC: 3 | RNVC: 2

15 Dec 1972

3040-01-641-7324
Mechanical Drive Housing

016417324
7550479-DF331473-0011: RNCC: 3 | RNVC: 1
G547-0003-DF331473-0011: RNCC: 5 | RNVC: 1
DF331473 FIND 11: RNCC: 5 | RNVC: 1
211064365: RNCC: 5 | RNVC: 1
7383858-DF331473-0011: RNCC: 5 | RNVC: 1
801-6406768 FIND 11: RNCC: 5 | RNVC: 1
DF331473-0011: RNCC: 5 | RNVC: 1
H547-0001-DF331473-0011: RNCC: 5 | RNVC: 1
801-6406768 FIND 11D4: RNCC: 5 | RNVC: 2
7383858-DF331473-0011D4: RNCC: 5 | RNVC: 2

30 Jan 2015

3040-00-193-8213
Remote Control Lever

001938213
8682676: RNCC: 3 | RNVC: 2
3040001938213: RNCC: 6 | RNVC: 9
2815001938213: RNCC: 6 | RNVC: 9

9 Mar 1970

3040-01-171-1762
Pawl

011711762
21858: RNCC: 3 | RNVC: 9

4 Feb 1984

3040-01-147-1730
Output Spline Adapter

011471730
06-19190-D: RNCC: 3 | RNVC: 2

11 Feb 1983

3040-01-278-2626
Counterbalance Weight

012782626
5124000-92: RNCC: 3 | RNVC: 2
5124000-92: RNCC: 3 | RNVC: 9

3 May 1988

3040-01-145-4123
Linear Actuating Cylinder Assembly

011454123
3400441: RNCC: 3 | RNVC: 2

11 Jan 1983

3040-00-357-5205
Steering Selector Valve

1 Jan 1900

3040-00-064-5188
Hub Clamp

1 Jan 1900

3040-00-575-8243
Ramp Tie Rod Assy

1 Jan 1900

3040-00-921-7241
Vehicular Universal Joint Spider

1 Jan 1900

3040-01-037-3887
Matched Helical Gear Set

1 Jan 1900

3040-00-466-4946
Shaft Collar

1 Jan 1900

3040-00-354-6049
Universal Joint Parts Kit

1 Jan 1900

3040-00-922-9774
Vehicular Universal Joint Spider

1 Jan 1900

3040-00-900-0430
Shaft Collar

1 Jan 1900

3040-00-335-1386
Shaft Collar

1 Jan 1900

3040-00-612-1822
Ball Joint

1 Jan 1900

3040-00-580-9749
Shaft Collar

1 Jan 1900

3040-00-567-8827
Shaft Coupling Half

1 Jan 1900

3040-01-133-7884
Electric Brake

1 Jan 1900

3040-01-219-8762
Cylinder Sleeve

1 Jan 1900

3040-00-613-9210
Rigid Connecting Link

1 Jan 1900

3040-01-204-0929
Flexible Drive Shaft

1 Jun 1994

3040-00-880-0641
Manualcontrol Lever

1 Jan 1900

3040-00-834-8821
Shaft Collar

1 Jan 1900

3040-00-611-3049
Flexible Coupling Insert

1 Jan 1900

3040-01-031-6578
Spur Gearshaft

1 Jan 1900

3040-00-697-8711
Dust And Moisture Protective Cap

1 Jan 1900

3040-00-913-5989
Electrical Wire

1 Jan 1900

3040-00-952-5723
Shaft Collar

1 Jan 1900

3040-00-537-1630
Shaft Collar

1 Jan 1900

3040-01-052-2915
Rigid Connecting Link

010522915
16P1529-3: RNCC: 3 | RNVC: 2
16P1529-3: RNCC: 5 | RNVC: 2
16P1529-1: RNCC: 5 | RNVC: 9
3040PL2064157: RNCC: 6 | RNVC: 9
16P1529-3: RNCC: 8 | RNVC: 2

12 Dec 1977

3040-01-279-6196
Lever Assembl Brake

012796196
01080-KIT: RNCC: 3 | RNVC: 2
01080: RNCC: 3 | RNVC: 9

21 May 1988

3040-01-167-2037
Shouldered Shaft

011672037
90039-991: RNCC: 3 | RNVC: 9
153 6086-001: RNCC: 5 | RNVC: 2
153 6086-001: RNCC: 5 | RNVC: 2
453 6086-001: RNCC: 5 | RNVC: 2
HE010783: RNCC: 5 | RNVC: 2
010783: RNCC: 5 | RNVC: 2
445-9813: RNCC: 6 | RNVC: 9

23 Nov 1983

3040-00-036-3421
Key Output Shaft

000363421
29245: RNCC: 3 | RNVC: 9
CA6377-2PC532: RNCC: 5 | RNVC: 9
CA6513PC532: RNCC: 5 | RNVC: 9
E2852PC191: RNCC: 5 | RNVC: 9
CA6373-532: RNCC: 5 | RNVC: 9
E2848PC191: RNCC: 5 | RNVC: 9
E2839PC191: RNCC: 5 | RNVC: 9
29245: RNCC: 5 | RNVC: 9
CA6372PC532: RNCC: 5 | RNVC: 9
CA6512PC532: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-703-3399
Rigid Connecting Link

017033399
4Y01003-131A: RNCC: 3 | RNVC: 2

31 Aug 2022

3040-01-602-8678
Straight Shaft

016028678
8417954-6: RNCC: 3 | RNVC: 2
8417954-61: RNCC: 5 | RNVC: 9

10 Feb 2012

3040-01-698-3114
Housing Adapter

016983114
26-045-003: RNCC: 3 | RNVC: 2

9 Nov 2021

3040-01-485-0768
Remote Control Lever

014850768
064-48419-000: RNCC: 3 | RNVC: 2
364-48946-000 ITEM 127: RNCC: 5 | RNVC: 2
064-48419C000: RNCC: 5 | RNVC: 9
364-48419-000: RNCC: C | RNVC: 1

16 May 2001

3040-01-678-4728
Rigid Connecting Link

016784728
4301478: RNCC: 3 | RNVC: 2
4301478 REV C: RNCC: 3 | RNVC: 2
4301478 REV A: RNCC: 5 | RNVC: 2

7 Feb 2019

3040-01-706-7979
Spur Gearshaft

017067979
7057-155: RNCC: 3 | RNVC: 2

20 Dec 2022

3040-01-707-4668
Piston Rod Guide

017074668
04652U314071: RNCC: 3 | RNVC: 2

3 Feb 2023

3040-01-706-5966
Rigid Connecting Link

017065966
A7-20126: RNCC: 3 | RNVC: 2
20138-28953 FIND ITEM 4: RNCC: C | RNVC: 1
20139-28953 FIND ITEM 4: RNCC: C | RNVC: 1
20127-28953 FIND ITEM 3: RNCC: C | RNVC: 1
20138-28953: RNCC: D | RNVC: 9
20127-28953: RNCC: D | RNVC: 9
20139-28953: RNCC: D | RNVC: 9

7 Dec 2022

3040-01-707-1224
Shaft Idler

017071224
GS-5075-1: RNCC: 3 | RNVC: 2

18 Jan 2023

3040-01-672-0798
Rotary Actuator

016720798
13059953: RNCC: 3 | RNVC: 2
13049316: RNCC: 5 | RNVC: 9

20 Apr 2018

3040-01-708-6437
Linear Actuating Cylinder Assembly

017086437
REN08-25: RNCC: 3 | RNVC: 2

14 Apr 2023

3040-01-703-1980
Push-Pull Control Assembly

017031980
425239-1: RNCC: 3 | RNVC: 2
425239: RNCC: D | RNVC: 9

23 Aug 2022

3040-01-701-4123
Straight Shaft

017014123
251T0100-415: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-705-4869
Shouldered Shaft

017054869
184807-1: RNCC: 3 | RNVC: 2

21 Sep 2022

3040-01-707-5658
Mechanically Actuated Spindle

017075658
816V-S: RNCC: 3 | RNVC: 2

9 Feb 2023

3040-01-707-6300
Mechanical Drive Housing

017076300
4240112-1: RNCC: 3 | RNVC: 2

13 Feb 2023

3040-01-707-6695
Extension Shaft

017076695
6545C214-1: RNCC: 3 | RNVC: 2
6545C214-1: RNCC: 5 | RNVC: 9
6545C214: RNCC: D | RNVC: 9

15 Feb 2023

3040-01-706-3380
Shouldered Shaft

017063380
BL-16029-1: RNCC: 3 | RNVC: 2

17 Nov 2022

3040-01-707-7418
Linear Actuating Cylinder Assembly

017077418
R69969669: RNCC: 3 | RNVC: 2

21 Feb 2023

3040-01-709-1306
Shaft Collar

017091306
18-0002-1: RNCC: 3 | RNVC: 2
7-4839-1: RNCC: 5 | RNVC: 1

12 May 2023

3040-01-706-2254
Piston Ring

017062254
F.US116124.25.3: RNCC: 3 | RNVC: 2

9 Nov 2022

3040-01-702-8143
Linear Actuating Cylinder Assembly

017028143
256T3250-6: RNCC: 3 | RNVC: 2

30 Jul 2022

3040-01-702-9290
Push-Pull Control Assembly

017029290
60178-002-04: RNCC: 3 | RNVC: 2
PL 60178-000-97: RNCC: 5 | RNVC: 2

8 Aug 2022

3040-01-702-9889
Housing Adapter

017029889
21418129: RNCC: 3 | RNVC: 2
17-60054: RNCC: 7 | RNVC: 2

10 Aug 2022

3040-01-702-8752
Linear Actuating Cylinder Assembly

017028752
630124-10: RNCC: 3 | RNVC: 2

3 Aug 2022

3040-01-703-0987
Breather

017030987
184862-2: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-01-703-2125
Straight Shaft

017032125
00-971497: RNCC: 3 | RNVC: 2

23 Aug 2022

3040-01-453-9097
Straight Shaft

014539097
1243630: RNCC: 3 | RNVC: 2
124-3630: RNCC: 3 | RNVC: 2
125-1296: RNCC: 5 | RNVC: 9

13 Mar 1998

3040-01-699-4119
Linear Actuating Cylinder Assembly

016994119
064 130: RNCC: 3 | RNVC: 2

28 Jan 2022

3040-01-701-4116
Straight Shaft

017014116
251T0101-117: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-699-3527
Mechanically Actuated Spindle

016993527
DB-071719 SHT 7 DET 36-A: RNCC: 3 | RNVC: 2
167-7044216-PC79: RNCC: 5 | RNVC: 2
167-7044216 REV A PC 79: RNCC: D | RNVC: 9

25 Jan 2022

3040-01-699-4228
Manual Control Lever Assembly

016994228
20809078 REV C: RNCC: 3 | RNVC: 2

28 Jan 2022

3040-01-698-1660
Straight Shaft

016981660
197K2712-4: RNCC: 3 | RNVC: 2
197K2712-4: RNCC: 5 | RNVC: 9

2 Nov 2021

3040-01-699-3959
Control Cam

016993959
47739-3: RNCC: 3 | RNVC: 2
5075/REV C SHEET 9 FIND IT NO 8: RNCC: C | RNVC: 1
5075 SHT 9 IT NO 8: RNCC: C | RNVC: 1

27 Jan 2022

3040-01-701-5067
Shouldered Shaft

017015067
1043F411000: RNCC: 3 | RNVC: 2
5802954459: RNCC: 5 | RNVC: 9

19 May 2022

3040-01-701-7406
Controllable Swashplate

017017406
449-210-004-115: RNCC: 3 | RNVC: 2

6 Jun 2022

3040-01-698-4561
Shouldered Shaft Assembly

016984561
355-2411: RNCC: 3 | RNVC: 2

18 Nov 2021

3040-01-701-0354
Piston Follower Cup

017010354
06351-08263-102: RNCC: 3 | RNVC: 2

23 Apr 2022

3040-01-701-6598
Shouldered Shaft

017016598
563-8615259-ITEM NO-22: RNCC: 3 | RNVC: 2
R696-1620-ITEM NO-22: RNCC: 5 | RNVC: 2

31 May 2022

3040-01-700-4135
Shaft Retaining Plate

017004135
06351-08503-102: RNCC: 3 | RNVC: 2
06351-08503: RNCC: D | RNVC: 9

28 Mar 2022

3040-01-701-1585
Pawl

017011585
06100-08831-105: RNCC: 3 | RNVC: 2

29 Apr 2022

3040-01-697-9563
Linear Actuating Cylinder Piston

016979563
8603363: RNCC: 3 | RNVC: 2
7377582-5: RNCC: 5 | RNVC: 2

20 Oct 2021

3040-01-699-8258
Linear Actuating Cylinder Assembly

016998258
416622-1: RNCC: 3 | RNVC: 2
416622: RNCC: D | RNVC: 9

1 Mar 2022

3040-01-699-9600
Linear Actuating Cylinder

016999600
450540: RNCC: 3 | RNVC: 2
32793 ITEM 11: RNCC: 5 | RNVC: 2

8 Mar 2022

3040-01-699-1358
Remote Control Lever

016991358
CTORVO-000303: RNCC: 3 | RNVC: 2
505-8787570 REV B F-4: RNCC: 5 | RNVC: 2

11 Jan 2022

3040-01-700-2976
Linear Actuating Cylinder Assembly

017002976
90620: RNCC: 3 | RNVC: 2

23 Mar 2022

3040-01-698-6488
Straight Shaft

016986488
8592552-045: RNCC: 3 | RNVC: 2
251-8592097 REV F FN 504: RNCC: 5 | RNVC: 2

1 Dec 2021

3040-01-700-4277
Shouldered Shaft

017004277
M99001577: RNCC: 3 | RNVC: 2
M99000461: RNCC: D | RNVC: 9

29 Mar 2022

3040-01-698-5008
Shouldered Shaft

016985008
12364590: RNCC: 3 | RNVC: 2
12364590: RNCC: 5 | RNVC: 9

19 Nov 2021

3040-01-699-1445
Linear Actuating Cylinder Piston Rod

016991445
721-8618575-4: RNCC: 3 | RNVC: 2
H861-5202-4: RNCC: 5 | RNVC: 2
721-8618575: RNCC: D | RNVC: 9

11 Jan 2022

3040-01-701-1421
Shouldered Shaft

017011421
316145: RNCC: 3 | RNVC: 2
315957: RNCC: D | RNVC: 9

29 Apr 2022

3040-01-701-4604
Straight Shaft

017014604
7000-2898: RNCC: 3 | RNVC: 2
506-40-7: RNCC: 5 | RNVC: 9
241-8592072 REV C SHEET 1 OF 2: RNCC: D | RNVC: 9

17 May 2022

3040-01-700-6883
Linear Actuating Cylinder Assembly Parts Kit

017006883
316224: RNCC: 3 | RNVC: 2
312625: RNCC: D | RNVC: 9

7 Apr 2022

3040-01-702-1795
Shouldered Shaft

017021795
433210015: RNCC: 3 | RNVC: 1

22 Jun 2022

3040-01-702-2991
Straight Shaft

017022991
256T2727-1: RNCC: 3 | RNVC: 1

27 Jun 2022

3040-01-702-2969
Mechanically Actuated Spindle

017022969
8667865-010: RNCC: 1 | RNVC: 2
0031040708-038: RNCC: 3 | RNVC: 2
8667865/SHEET 4/ITEM 10: RNCC: D | RNVC: 9

27 Jun 2022

3040-01-702-0508
Shouldered Shaft

017020508
12618131: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-430-3355
Rigid Connecting Link

014303355
7T1099: RNCC: 3 | RNVC: 2
A00277: RNCC: 5 | RNVC: 2
7T-1099: RNCC: 5 | RNVC: 2

26 Apr 1996

3040-01-525-5528
Nonrotating Shaft Eye Bracket

015255528
11581527: RNCC: 3 | RNVC: 2
E1211162: RNCC: 5 | RNVC: 2
777.21.018: RNCC: 5 | RNVC: 2

16 Nov 2004

3040-01-710-7033
Belt-Chain Tension Adjusting Device

017107033
3973819: RNCC: 3 | RNVC: 2

17 Jun 2023

3040-01-708-4160
Shouldered Shaft Assembly

017084160
29545018: RNCC: 3 | RNVC: 2

4 Apr 2023

3040-01-708-3659
Linear Actuating Cylinder Assembly

017083659
2717201: RNCC: 3 | RNVC: 2

1 Apr 2023

3040-01-714-1560

017141560
975898-10: RNCC: 3 | RNVC: 2
975898: RNCC: D | RNVC: 9

3040-01-714-1412

017141412
563-8842381-35: RNCC: 3 | RNVC: 2
R5520601-35: RNCC: 5 | RNVC: 2
LOA022823-35: RNCC: 5 | RNVC: 2
8842381/PAGE 24: RNCC: C | RNVC: 1
8842381: RNCC: D | RNVC: 9

3040-01-711-1169

017111169
GENATOM-002: RNCC: 3 | RNVC: 2

3040-01-713-8048

017138048
C27097-1: RNCC: 3 | RNVC: 2
C27097: RNCC: D | RNVC: 9

3040-01-714-3126

017143126
G14-28V4-01356: RNCC: 3 | RNVC: 2

3040-01-713-5656

017135656
L5226261-021: RNCC: 3 | RNVC: 2
L5226261: RNCC: D | RNVC: 9

3040-01-708-4965
Linear Actuating Cylinder Assembly

017084965
1340853C2: RNCC: 3 | RNVC: 2

10 Apr 2023

3040-01-714-2086

017142086
AUC12838: RNCC: 3 | RNVC: 2

3040-01-708-3052
Mechanical Drive Housing

017083052
93011-151: RNCC: 3 | RNVC: 2

28 Mar 2023

3040-01-710-5901
Piston Ring

017105901
00-997699: RNCC: 3 | RNVC: 2

8 Jun 2023

3040-01-708-4231
Rigid Connecting Link

017084231
SLS-060-103-001: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-710-9795
Push-Pull Control Assembly

017109795
CH7800: RNCC: 3 | RNVC: 2

12 Jul 2023

3040-01-683-9486
Ballscrew Assembly

016839486
W-20181: RNCC: 3 | RNVC: 2
W20181: RNCC: 3 | RNVC: 2

15 Oct 2019

3040-01-708-9540
Shouldered Shaft

017089540
4011-6: RNCC: 3 | RNVC: 2

3 May 2023

3040-01-228-3187
Linear Actuating Cylinder Head

012283187
4292-012056: RNCC: 3 | RNVC: 2
510635B: RNCC: 5 | RNVC: 2

17 Mar 1986

3040-01-648-4147
Mechanically Actuated Spindle

016484147
8100-1252-0318, ASSY 061, PC 35: RNCC: 3 | RNVC: 2
8100-1252-0318 ASSY 061 PT NO 35: RNCC: 3 | RNVC: 9
8100-1252-0318: RNCC: D | RNVC: 9

23 Sep 2015

3040-01-462-1673
Linear Actuating Cylinder Assembly

014621673
1H2H0A00269611: RNCC: 3 | RNVC: 2
6.00 CBB-2HTVS43C X 38.875: RNCC: 5 | RNVC: 9
5038038: RNCC: 5 | RNVC: 9
AG189989D0: RNCC: 5 | RNVC: 9

22 Jan 1999

3040-00-906-0147
Linear Actuating Cylinder Assembly Parts Kit

009060147
5703405: RNCC: 3 | RNVC: 2
5703405: RNCC: 5 | RNVC: 2
5793070027: RNCC: 5 | RNVC: 2
2590009060147: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-01-706-1295
Straight Shaft Assembly

017061295
12638872: RNCC: 3 | RNVC: 2

2 Nov 2022

3040-01-706-2040
Housing Adapter

017062040
200799572: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-706-2022
Linear Actuating Cylinder Piston

017062022
34503030D: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-707-6405
Housing Adapter

017076405
516-5928036-28-1: RNCC: 3 | RNVC: 2
2305-115 SHEET 26: RNCC: 5 | RNVC: 9
2305-115-28-1: RNCC: 5 | RNVC: 9
2305-115: RNCC: D | RNVC: 9

14 Feb 2023

3040-01-707-4366
Brake Shoe

017074366
474013324071: RNCC: 3 | RNVC: 2

2 Feb 2023

3040-01-707-4667
Counterbalance Weight

017074667
44-20366: RNCC: 3 | RNVC: 2
20526-ITEM-19: RNCC: 5 | RNVC: 2
20526 REV E SHEET 1 FIND 19: RNCC: 5 | RNVC: 2

3 Feb 2023

3040-01-706-6013
Body Hub

017066013
LG-958-A: RNCC: 3 | RNVC: 2
AW25M10017 / ITEM 7: RNCC: D | RNVC: 9

7 Dec 2022

3040-01-707-3665
Body Hub

017073665
44209UNBJA71: RNCC: 3 | RNVC: 2

30 Jan 2023

3040-01-707-3645
Counterbalance Weight

017073645
38-21406: RNCC: 3 | RNVC: 2
20526-ITEM-28: RNCC: 5 | RNVC: 2
20526 REV E SHEET 1 FIND 28: RNCC: 5 | RNVC: 9
20526: RNCC: D | RNVC: 9

30 Jan 2023

3040-01-705-7660
Nonrotating Shaft Eye Bracket

017057660
3101-756: RNCC: 3 | RNVC: 2

11 Oct 2022

3040-01-706-7093
Power Takeoff

017067093
23093741: RNCC: 3 | RNVC: 2

14 Dec 2022

3040-01-706-7026
Rigid Connecting Link

017067026
4Y01004-101A: RNCC: 3 | RNVC: 2

14 Dec 2022

3040-01-706-8134
Shouldered Shaft

017068134
NCZ134896: RNCC: 3 | RNVC: 2

20 Dec 2022

3040-01-707-7945
Rigid Connecting Link

017077945
04103655: RNCC: 3 | RNVC: 2
04103655: RNCC: 5 | RNVC: 2
0511 4518 ITEM 3: RNCC: 5 | RNVC: 9

22 Feb 2023

3040-01-706-8660
Power Connector Cap

017068660
1810-400-230: RNCC: 3 | RNVC: 2

27 Dec 2022

3040-01-337-7302
Shouldered Shaft

013377302
8929232: RNCC: 3 | RNVC: 2
DDE8929232: RNCC: 5 | RNVC: 2

21 Apr 1991

3040-01-677-6408
Linear Actuating Cylinder Assembly

016776408
N5W-5.00X80.75-N-2.50-2-T-F-V-1-: RNCC: 3 | RNVC: 1
LINE01 N5W-5.00X80.75-N-2.50-2-T: RNCC: 5 | RNVC: 1
ELRN-016776408: RNCC: 5 | RNVC: 2

26 Dec 2018

3040-01-699-0163
Brake Arm

016990163
4089551: RNCC: 3 | RNVC: 2

3 Jan 2022

3040-01-174-6964
Rigid Connecting Link

011746964
99207/5055T13P01: RNCC: 1 | RNVC: 2
5055T13P01: RNCC: 3 | RNVC: 2
D0-514-DL: RNCC: 3 | RNVC: 2
ALK5-57: RNCC: 3 | RNVC: 2
10106967: RNCC: 6 | RNVC: 9
5055T13: RNCC: D | RNVC: 9

21 Mar 1984

3040-01-703-0934
Shouldered Shaft

017030934
556-8545101-ITEM NO 2: RNCC: 3 | RNVC: 2
2644-7000-ITEM NO-2: RNCC: 5 | RNVC: 2

16 Aug 2022

3040-01-703-3662
Straight Shaft Assembly

017033662
5-13-10199-2: RNCC: 3 | RNVC: 2
5-13-10199: RNCC: D | RNVC: 9

1 Sep 2022

3040-01-656-8076
Flexible Shaft Assembly Core

016568076
8893-12-BULK: RNCC: 3 | RNVC: 2
A-212-8893-12: RNCC: 5 | RNVC: 9
8897: RNCC: D | RNVC: 9

19 Jul 2016

3040-01-538-0962
Shouldered Shaft

015380962
513009-1: RNCC: 3 | RNVC: 2
11210962: RNCC: 5 | RNVC: 2

10 Mar 2006

3040-01-698-5788
Shouldered Shaft

016985788
60633: RNCC: 3 | RNVC: 2

26 Nov 2021

3040-01-693-1294
Multiple Gears Gearshaft

016931294
7000-2931: RNCC: 3 | RNVC: 2
8592276-101: RNCC: 3 | RNVC: 9
311-8592276: RNCC: D | RNVC: 9

27 Jan 2021

3040-01-705-7189
Push-Pull Control Assembly

017057189
CHX8740P: RNCC: 3 | RNVC: 2

6 Oct 2022

3040-01-483-1204
Ball Joint

014831204
66016-1: RNCC: 3 | RNVC: 2
12477543: RNCC: 5 | RNVC: 9
12477543: RNCC: 7 | RNVC: 2

16 Mar 2001

3040-01-204-0327
Shouldered Shaft

012040327
937891: RNCC: 3 | RNVC: 2
937891: RNCC: 3 | RNVC: 9
1513160-4: RNCC: 5 | RNVC: 2
15136010-4: RNCC: 5 | RNVC: 2
937891PH: RNCC: 5 | RNVC: 2
10915: RNCC: 5 | RNVC: 2
151316010-4-1: RNCC: 5 | RNVC: 9
937891PH: RNCC: 5 | RNVC: 9
93789102: RNCC: C | RNVC: 1
937891-00: RNCC: C | RNVC: 1

22 Mar 1985

3040-01-543-2721
Shouldered Shaft

015432721
1W4746: RNCC: 3 | RNVC: 2
1W-4746: RNCC: 5 | RNVC: 2

6 Sep 2006

3040-01-531-1671
Curv Shaft Assembly

015311671
13006416: RNCC: 3 | RNVC: 2
A13803SB: RNCC: 5 | RNVC: 2
777.26.010SK: RNCC: 5 | RNVC: 2

24 Jun 2005

3040-01-709-1753
Shouldered Shaft

017091753
91908-2: RNCC: 3 | RNVC: 2

15 May 2023

3040-01-710-3194
Breather

017103194
REN08-12: RNCC: 3 | RNVC: 2

24 May 2023

3040-01-710-5157
Shouldered Shaft

017105157
845-8616936-ITEM 94: RNCC: 3 | RNVC: 2
2644-343-01: RNCC: D | RNVC: 9

5 Jun 2023

3040-01-706-5314
Linear Actuating Cylinder Assembly

017065314
20-212: RNCC: 3 | RNVC: 2

5 Dec 2022

3040-01-567-5864
Linear Actuating Cylinder

015675864
AHC17464: RNCC: 3 | RNVC: 2
AH163631: RNCC: 3 | RNVC: 9

1 Oct 2008

3040-01-703-0385
Piston Ring

017030385
PK202HH004: RNCC: 3 | RNVC: 2

12 Aug 2022

3040-01-045-9985
Rigid Connecting Link

010459985
16P184-5: RNCC: 3 | RNVC: 2
16P184-3: RNCC: 5 | RNVC: 9
3040PL2061389: RNCC: 6 | RNVC: 9
16P184-5: RNCC: 8 | RNVC: 2

10 Aug 1977

3040-01-710-8563
Straight Shaft Assembly

017108563
112153040: RNCC: 3 | RNVC: 2

30 Jun 2023

3040-01-711-0785
Straight Shaft

017110785
412-040-621-107FM: RNCC: 3 | RNVC: 2

19 Jul 2023

3040-01-710-8757
Straight Shaft Assembly

017108757
112153037: RNCC: 3 | RNVC: 2

5 Jul 2023

3040-01-708-1912
Rigid Connecting Link

017081912
206-010-360-005: RNCC: 3 | RNVC: 2

21 Mar 2023

3040-01-708-3249
Shouldered Shaft

017083249
251N3084-1: RNCC: 3 | RNVC: 2

29 Mar 2023

3040-01-708-8247
Extension Shaft

017088247
113257005: RNCC: 3 | RNVC: 2

25 Apr 2023

3040-01-690-3766
Rigid Connecting Link

016903766
221K718H17: RNCC: 3 | RNVC: 2
221K718H17: RNCC: 5 | RNVC: 2
221K718H07: RNCC: 5 | RNVC: 9
221K718: RNCC: D | RNVC: 9

10 Aug 2020

3040-01-700-9384
Housing Adapter

017009384
5802008492: RNCC: 3 | RNVC: 2

21 Apr 2022

3040-01-154-3069
Brake Hub

011543069
D104370: RNCC: 3 | RNVC: 2
E108495 FIND 94: RNCC: 5 | RNVC: 2
E108496 PIECE 94: RNCC: 5 | RNVC: 2
E105859 PIECE 94: RNCC: 5 | RNVC: 2
E105860 PIECE 94: RNCC: 5 | RNVC: 2
E108165 PIECE 94: RNCC: 5 | RNVC: 2
D305450 PIECE 94: RNCC: 5 | RNVC: 2
E108494 FIND 94: RNCC: 5 | RNVC: 2
E108165 PIECE 94: RNCC: 5 | RNVC: 9
E105860 PIECE 94: RNCC: 5 | RNVC: 9

23 May 1983

3040-01-009-3814
Manual Control Lever

010093814
01009403: RNCC: 3 | RNVC: 2
1-5907: RNCC: 3 | RNVC: 2
1-5904: RNCC: 3 | RNVC: 2
160034: RNCC: 3 | RNVC: 2
ES0160: RNCC: 5 | RNVC: 2
68005: RNCC: 5 | RNVC: 2
1-5919: RNCC: 5 | RNVC: 9
68005: RNCC: 5 | RNVC: 9
73173900: RNCC: 5 | RNVC: 9
88101325FIND2: RNCC: 5 | RNVC: 9

11 Sep 1975

3040-00-163-0400
Spur Gearshaft

001630400
99121620: RNCC: 3 | RNVC: 2
A1259PC56: RNCC: 5 | RNVC: 9
A1279PC56: RNCC: 5 | RNVC: 9
A1280PC56: RNCC: 5 | RNVC: 9
A1354MPC56: RNCC: 5 | RNVC: 9
A1351PC56: RNCC: 5 | RNVC: 9
A1352PC56: RNCC: 5 | RNVC: 9
A1353MPC56: RNCC: 5 | RNVC: 9
A1990PC56: RNCC: 5 | RNVC: 9
A2045PC56: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-700-8103
Cylinder Support

017008103
5802073922: RNCC: 3 | RNVC: 2
1827001621: RNCC: 5 | RNVC: 2

14 Apr 2022

3040-01-643-5804
Swing Arm

016435804
501-7108142-33: RNCC: 3 | RNVC: 1
H5257207-033: RNCC: 5 | RNVC: 1
H547-0001-H5257617-01-4: RNCC: 5 | RNVC: 1
7383858-H5257207-035: RNCC: 5 | RNVC: 1
7383858-H5257207-033: RNCC: 5 | RNVC: 1
H547-0001-H5257207-033: RNCC: 5 | RNVC: 1
H525-7207-33: RNCC: 5 | RNVC: 1
501-7108142-35: RNCC: 5 | RNVC: 1
501-7108142-33D4: RNCC: 5 | RNVC: 2
501-7108142-35D4: RNCC: 5 | RNVC: 2

7 Apr 2015

3040-01-701-3750
Straight Shaft

017013750
563-8615259-ITEM NO-23: RNCC: 3 | RNVC: 2
R696-1630-ITEM NO 23: RNCC: 5 | RNVC: 2
563-8615259: RNCC: D | RNVC: 9

13 May 2022

3040-01-701-4125
Straight Shaft

017014125
251T0101-412: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-699-5832
Control Cam

016995832
11583592: RNCC: 3 | RNVC: 2

10 Feb 2022

3040-01-701-0836
Piston Rod Ring

017010836
CM 10036550: RNCC: 3 | RNVC: 2
CM 10033288: RNCC: 5 | RNVC: 9

26 Apr 2022

3040-01-700-3363
Shouldered Shaft Assembly

017003363
06351-08240-042: RNCC: 3 | RNVC: 2

23 Mar 2022

3040-01-701-4124
Straight Shaft

017014124
251T0100-503: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-701-4119
Straight Shaft

017014119
251T0100-129: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-699-0012
Housing Adapter

016990012
12628441: RNCC: 3 | RNVC: 2

29 Dec 2021

3040-01-699-0307
Shouldered Shaft

016990307
00-693779: RNCC: 3 | RNVC: 2

4 Jan 2022

3040-01-699-1568
Nonaircraft Mechanical Actuator

016991568
CTORVO-000293: RNCC: 3 | RNVC: 2
505-8787568 REV A (F2): RNCC: 5 | RNVC: 2
505-8787568 REV A: RNCC: D | RNVC: 9

12 Jan 2022

3040-01-699-1022
Straight Shaft

016991022
721-8544172-PN-11: RNCC: 3 | RNVC: 2
H861-1505-PN-11: RNCC: D | RNVC: 9

7 Jan 2022

3040-01-699-8015
Mechanical Drive Housing

016998015
628034-1: RNCC: 3 | RNVC: 2

25 Feb 2022

3040-01-699-1814
Nonaircraft Mechanical Actuator

016991814
CTORVO-000327: RNCC: 3 | RNVC: 2
505-8787572 REV A (F10): RNCC: 5 | RNVC: 2
505-8787572 REV A: RNCC: D | RNVC: 9

13 Jan 2022

3040-01-699-2317
Piston Ring

016992317
3029148-014: RNCC: 3 | RNVC: 2

18 Jan 2022

3040-01-699-8555
Mechanically Actuated Spindle

016998555
SP002096 PC NO 38 DET 32-4A: RNCC: 3 | RNVC: 2
SP002096 PC NO 38 DET 32-4A: RNCC: 5 | RNVC: 2
SP002096: RNCC: D | RNVC: 9

2 Mar 2022

3040-01-699-0296
Linear Actuating Cylinder Assembly Parts Kit

016990296
LCS1500RVS-002: RNCC: 3 | RNVC: 2

4 Jan 2022

3040-01-703-4459
Shouldered Shaft

017034459
184824-1: RNCC: 3 | RNVC: 2

7 Sep 2022

3040-01-699-1207
Linear Actuating Cylinder Assembly

016991207
721-8618575-PN-5: RNCC: 3 | RNVC: 2
H861-5202-PN-5: RNCC: D | RNVC: 9

10 Jan 2022

3040-01-701-6180
Nonaircraft Mechanical Actuator

017016180
73730124-3: RNCC: 3 | RNVC: 2

26 May 2022

3040-01-701-6080
Counterbalance Weight

017016080
952B928-11: RNCC: 3 | RNVC: 2

26 May 2022

3040-01-706-6571
Rigid Connecting Link

017066571
1544501: RNCC: 3 | RNVC: 2

10 Dec 2022

3040-01-702-0510
Straight Shaft

017020510
12617553: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-702-6727
Shouldered Shaft

017026727
184713-1: RNCC: 3 | RNVC: 2

19 Jul 2022

3040-01-706-8298
Shouldered Shaft

017068298
8714686: RNCC: 3 | RNVC: 2

21 Dec 2022

3040-01-702-0799
Shouldered Shaft

017020799
988-0425: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-699-3879
Straight Shaft

016993879
5064-151-000: RNCC: 3 | RNVC: 2
5075 SHT 9 IT NO 13: RNCC: C | RNVC: 1

27 Jan 2022

3040-01-701-0545
Straight Shaft

017010545
0953SA177: RNCC: 3 | RNVC: 2
100167185: RNCC: 5 | RNVC: 9
ITEM 6,0953SA072 REV D: RNCC: 5 | RNVC: 9

25 Apr 2022

3040-01-702-0254
Straight Shaft

017020254
12596846: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-706-9196
Linear Actuating Cylinder Piston

017069196
7378042: RNCC: 3 | RNVC: 2
7378042-D1443688: RNCC: 5 | RNVC: 2
7378017-4: RNCC: 5 | RNVC: 2

3 Jan 2023

3040-01-702-7738
Nonaircraft Mechanical Actuator

017027738
58202-4: RNCC: 3 | RNVC: 1

27 Jul 2022

3040-01-702-1833
Counterbalance Weight

017021833
717405203-001: RNCC: 3 | RNVC: 2

22 Jun 2022

3040-01-701-6529
Shouldered Shaft

017016529
113T1216-1: RNCC: 3 | RNVC: 1

28 May 2022

3040-01-705-7814
Shouldered Shaft

017057814
12606708: RNCC: 3 | RNVC: 2
12606708: RNCC: 5 | RNVC: 2

12 Oct 2022

3040-01-707-6414
Shaft Collar

017076414
S2600A2900B0600: RNCC: 3 | RNVC: 2

14 Feb 2023

3040-01-707-2824
Mechanical Drive Housing Part

017072824
2943160-103: RNCC: 3 | RNVC: 2

26 Jan 2023

3040-01-703-2330
Linear Actuating Cylinder Cap

017032330
4336-0008: RNCC: 3 | RNVC: 2

24 Aug 2022

3040-01-705-5212
Brake Lining Kit

017055212
2101067-JNN: RNCC: 3 | RNVC: 2

23 Sep 2022

3040-01-705-5155
Mechanical Drive Housing

017055155
12576296: RNCC: 3 | RNVC: 2

23 Sep 2022

3040-01-706-0443
Shouldered Shaft

017060443
5802528460: RNCC: 3 | RNVC: 2

27 Oct 2022

3040-01-156-0575
Manual Control Lever

011560575
0P9011EY: RNCC: 3 | RNVC: 2
2246260: RNCC: 5 | RNVC: 2
0P90011EY: RNCC: 5 | RNVC: 9
40397A-005: RNCC: 5 | RNVC: 9
2246260: RNCC: 5 | RNVC: 9
138-1: RNCC: 5 | RNVC: 9
15003: RNCC: 5 | RNVC: 9
45A212: RNCC: 5 | RNVC: 9
40397A: RNCC: 5 | RNVC: 9
10550-2: RNCC: 5 | RNVC: 9

18 Jun 1983

3040-01-700-8209
Belt-Chain Tension Adjusting Device

017008209
A9062002470: RNCC: 3 | RNVC: 2

15 Apr 2022

3040-01-201-2611
Linear Actuating Cylinder

012012611
1H000075773: RNCC: 3 | RNVC: 2
AA018860D0: RNCC: 3 | RNVC: 9
2CCHLTS14CX3 AG: RNCC: 5 | RNVC: 9
2CC2HLTS14CX3IN: RNCC: 5 | RNVC: 9
2CC2HLTS14X3: RNCC: 5 | RNVC: 9
CC2HLTS14AC3: RNCC: 5 | RNVC: 9
15SH0A00132988: RNCC: 5 | RNVC: 9

14 Feb 1985

3040-01-479-5023
L Cylinder Assembly

014795023
12422486: RNCC: 3 | RNVC: 2
12422486: RNCC: 5 | RNVC: 2
TVS22428: RNCC: 5 | RNVC: 9
3040014795023: RNCC: 6 | RNVC: 9

24 Oct 2000

3040-01-422-9437
Linear Actuating Cylinder Assembly

014229437
1H2H0A00294553: RNCC: 3 | RNVC: 2
EE110718E: RNCC: 3 | RNVC: 9
2.00CC2HKTVS14AC9.5: RNCC: 5 | RNVC: 1
1H2H0A00334843: RNCC: 5 | RNVC: 9

12 Dec 1995

3040-01-714-2627

017142627
HST1570ZBWT12: RNCC: 3 | RNVC: 2
HST1570: RNCC: D | RNVC: 9

3040-01-713-6936

017136936
12640872: RNCC: 3 | RNVC: 2
12640872: RNCC: C | RNVC: 1

3040-01-713-6342

017136342
8198926: RNCC: 3 | RNVC: 2
01162720: RNCC: 5 | RNVC: 2

3040-01-714-4823

017144823
CC73655-001: RNCC: 3 | RNVC: 2
CC73649-5: RNCC: C | RNVC: 1

3040-01-686-7694
Rigid Connecting Link

016867694
444-001-001-113: RNCC: 3 | RNVC: 2
444-001-001-101: RNCC: 5 | RNVC: 9

4 Mar 2020

3040-01-710-9275
Shoe Type Brake

017109275
K23-171-00: RNCC: 3 | RNVC: 2

10 Jul 2023

3040-01-710-6117
Rotary Actuating Cylinder Assembly

017106117
184100000-1: RNCC: 3 | RNVC: 2

10 Jun 2023

3040-01-632-5650
Control Cam

016325650
69-76557-4: RNCC: 3 | RNVC: 2
69-76557-2: RNCC: 5 | RNVC: 2

23 Oct 2014

3040-01-706-4625
Straight Shaft

017064625
515-4457057-5: RNCC: 3 | RNVC: 2
515-4457063-17: RNCC: 3 | RNVC: 2

28 Nov 2022

3040-01-706-3836
Rigid Connecting Link

017063836
1544510: RNCC: 3 | RNVC: 2

19 Nov 2022

3040-01-707-5445
Counterbalance Weight

017075445
44-20445: RNCC: 3 | RNVC: 2
18272: RNCC: D | RNVC: 9

8 Feb 2023

3040-01-707-3696
Linear Actuating Cylinder Piston Rod

017073696
P3242-03: RNCC: 3 | RNVC: 2

30 Jan 2023

3040-01-707-3436
Counterbalance Weight

017073436
38-20380: RNCC: 3 | RNVC: 2
20526-ITEM-17: RNCC: C | RNVC: 1
20526: RNCC: D | RNVC: 9

28 Jan 2023

3040-01-707-7934
Rigid Connecting Link

017077934
2643-998-01-ITEM-36: RNCC: 3 | RNVC: 2
845-6351932-ITEM-36: RNCC: 5 | RNVC: 2
2643-998-01: RNCC: D | RNVC: 9
845-6351932: RNCC: D | RNVC: 9

22 Feb 2023

3040-01-705-6024
Shouldered Shaft

017056024
845-7286650 ITEM 53: RNCC: 3 | RNVC: 2
2643-859-10 ITEM 53: RNCC: 5 | RNVC: 2

28 Sep 2022

3040-01-706-6613
Rigid Connecting Link

017066613
A7-20118: RNCC: 3 | RNVC: 2
20127-28953-ITEM-3.1: RNCC: 5 | RNVC: 2
20139-ITEM-4.1: RNCC: 5 | RNVC: 2
20138-28953-ITEM-4.1: RNCC: 5 | RNVC: 2
20139 REV C SHEET 1 FIND 4.1: RNCC: D | RNVC: 9
20127-28953 SHEET 1 FIND 3.1: RNCC: D | RNVC: 9
20138-28953 SHEET 1 FIND 4.1: RNCC: D | RNVC: 9

12 Dec 2022

3040-01-705-6615
Shaft Unit

017056615
PAAF984452: RNCC: 3 | RNVC: 2
S9247-AR-MMC-A10 PG 17: RNCC: 5 | RNVC: 2

3 Oct 2022

3040-01-708-8337
Shouldered Shaft

017088337
EB211043785: RNCC: 3 | RNVC: 2
LSA003940-34: RNCC: 5 | RNVC: 1
556-8843849-34: RNCC: 5 | RNVC: 2
R7912701-34: RNCC: C | RNVC: 1
556-8843849: RNCC: D | RNVC: 9

26 Apr 2023

3040-01-705-8399
Shaft Idler

017058399
12638845: RNCC: 3 | RNVC: 2

17 Oct 2022

3040-01-705-7765
Nonrotating Shaft Eye Bracket

017057765
3101-427: RNCC: 3 | RNVC: 2

12 Oct 2022

3040-01-708-1375
Shouldered Shaft

017081375
51893: RNCC: 3 | RNVC: 2

16 Mar 2023

3040-01-706-8302
Shouldered Shaft

017068302
8714698: RNCC: 3 | RNVC: 2

21 Dec 2022

3040-01-707-2600
Breather

017072600
06351-08801-103: RNCC: 3 | RNVC: 2
06351-08801: RNCC: D | RNVC: 9

25 Jan 2023

3040-01-577-6050
Body Hub

015776050
3653717: RNCC: 3 | RNVC: 2
2391253: RNCC: 5 | RNVC: 9

14 Sep 2009

3040-00-402-6091
Linear Actuating Cylinder Assembly

8 Apr 1970

3040-01-701-4083
Shouldered Shaft

017014083
113T1216-2: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-699-3326
Linear Actuating Cylinder Piston Rod

016993326
373545-1: RNCC: 3 | RNVC: 2

24 Jan 2022

3040-01-699-6925
Rotary Actuating Cylinder Assembly

016996925
500B12M: RNCC: 3 | RNVC: 1
500-28355TR: RNCC: 5 | RNVC: 2
500B12MTR: RNCC: 5 | RNVC: 2
500-28355: RNCC: D | RNVC: 9

18 Feb 2022

3040-01-700-2982
Linear Actuating Cylinder Assembly

017002982
90839: RNCC: 3 | RNVC: 2

23 Mar 2022

3040-01-512-5706
Brake Disc

015125706
AHA0200-113-000: RNCC: 3 | RNVC: 2
A9876 ITEM 9: RNCC: 5 | RNVC: 2
AHA200-113-000: RNCC: 5 | RNVC: 9

4 Sep 2003

3040-01-699-6080
Push-Pull Control Assembly Parts Kit

016996080
06240-ZY6-V90: RNCC: 3 | RNVC: 9

11 Feb 2022

3040-01-702-5328
Rotary Actuating Cylinder Assembly

017025328
341B11210PF2410-101: RNCC: 3 | RNVC: 2

13 Jul 2022

3040-01-702-7035
Rotary Actuating Cylinder Assembly

017027035
341B11210PF1612-201: RNCC: 3 | RNVC: 2

21 Jul 2022

3040-01-703-1495
Pneumatic Actuator Cylinder Housing

017031495
1011-86: RNCC: 3 | RNVC: 2

19 Aug 2022

3040-01-702-2469
Rotary Actuating Cylinder Assembly

017022469
341B11210PF3617-202: RNCC: 3 | RNVC: 2

23 Jun 2022

3040-01-526-5126
Flexible Shaft Assembly

015265126
57353-120FT0IN: RNCC: 3 | RNVC: 2
57353-120: RNCC: 5 | RNVC: 2

21 Dec 2004

3040-01-622-6357
Manual Control Lever

016226357
266FTS-3/4: RNCC: 3 | RNVC: 2
S04-C1113-SSEA: RNCC: 5 | RNVC: 2
S04-C1113-SSEA: RNCC: 5 | RNVC: 2
F11SRC-75: RNCC: 5 | RNVC: 9

16 Oct 2013

3040-01-710-7666
Straight Shaft Assembly

017107666
112153038: RNCC: 3 | RNVC: 2

23 Jun 2023

3040-01-710-7477
Hub Clamp

017107477
001-000225-000: RNCC: 3 | RNVC: 2
DXE-RSB-I05000: RNCC: 5 | RNVC: 2

22 Jun 2023

3040-01-575-6411
Transmission Fluid Cooler

015756411
07-25471-000: RNCC: 3 | RNVC: 2
SEN 1568115: RNCC: 5 | RNVC: 9
15681-1-5: RNCC: D | RNVC: 9

10 Jul 2009

3040-01-710-6672
Brake Backing Plate

017106672
100020358: RNCC: 3 | RNVC: 2

14 Jun 2023

3040-01-093-7655
Remote Control Lever

010937655
441B269-1: RNCC: 3 | RNVC: 2
441B269-001: RNCC: 3 | RNVC: 9
441B269-001: RNCC: 5 | RNVC: 9
7378E65P99: RNCC: 5 | RNVC: 9
441B269P1: RNCC: 5 | RNVC: 9
441B269-1: RNCC: 5 | RNVC: 9
441B269-001: RNCC: C | RNVC: 1

24 Apr 1980

3040-01-708-7918
Nonaircraft Mechanical Actuator

017087918
324001-1: RNCC: 3 | RNVC: 2
324001: RNCC: D | RNVC: 9

24 Apr 2023

3040-01-710-6173
Nonaircraft Mechanical Actuator

017106173
0511/25-S793-100: RNCC: 3 | RNVC: 2
OPC0511: RNCC: D | RNVC: 9

12 Jun 2023

3040-01-249-1149
Rigid Connecting Link

012491149
250-4856446 PC 412: RNCC: 3 | RNVC: 2
250-4856382ITEM16: RNCC: 5 | RNVC: 1

5 Feb 1987

3040-01-708-7153
Extension Shaft

017087153
DTSX: RNCC: 3 | RNVC: 2
DTSX: RNCC: 5 | RNVC: 2

18 Apr 2023

3040-01-708-4519
Mechanical Drive Housing

017084519
SLS-040-056-101: RNCC: 3 | RNVC: 2

6 Apr 2023

3040-01-437-8066
Helical Gearshaft

014378066
US2:003520741: RNCC: 3 | RNVC: 2
3520741: RNCC: 3 | RNVC: 9
5678014-SDN425 PC 300: RNCC: 5 | RNVC: 9
5678014: RNCC: D | RNVC: 9

24 Oct 1996

3040-01-708-1863
Shouldered Shaft

017081863
765456: RNCC: 3 | RNVC: 2

20 Mar 2023

3040-01-708-4157
Shouldered Shaft

017084157
29544814: RNCC: 3 | RNVC: 2

4 Apr 2023

3040-01-708-4147
Transmission Range Clutch Hub

017084147
29551652: RNCC: 3 | RNVC: 2

4 Apr 2023

3040-01-710-4666
Counterbalance Weight

017104666
23087713-3: RNCC: 3 | RNVC: 2

31 May 2023

3040-01-708-3317
Straight Shaft

017083317
73859: RNCC: 3 | RNVC: 1
2498-00-313PN7,SZ4TYI: RNCC: 5 | RNVC: 1

30 Mar 2023

3040-01-710-6075
Linear Actuating Cylinder Cap

017106075
00-973134: RNCC: 3 | RNVC: 2

10 Jun 2023

3040-01-487-0263
Shouldered Shaft

014870263
064-48737-000: RNCC: 3 | RNVC: 2
364-48756-000 ITEM 35A: RNCC: 5 | RNVC: 2
064-48737D000: RNCC: C | RNVC: 1
364-48756-000: RNCC: D | RNVC: 9

23 Jul 2001

3040-01-707-1521
Body Hub

017071521
206-040-328-101: RNCC: 3 | RNVC: 2

19 Jan 2023

3040-01-707-1491
Counterbalance Weight

017071491
SLS-010-313-103: RNCC: 3 | RNVC: 2

19 Jan 2023

3040-01-706-6258
Shouldered Shaft

017066258
7E-7167: RNCC: 3 | RNVC: 2

8 Dec 2022

3040-01-706-4043
Shaft Idler

017064043
149-0562: RNCC: 3 | RNVC: 2

22 Nov 2022

3040-01-706-3928
Flexible Drive Shaft

017063928
92361-03801-102: RNCC: 3 | RNVC: 2

21 Nov 2022

3040-01-496-9424
Linear Actuating Cylinder Assembly

014969424
4.00CC2HHNAT1S24AC16.000: RNCC: 3 | RNVC: 2
SH-4A42-16-2 1/2-P1: RNCC: 5 | RNVC: 2
4.00CC-2HLTS24AC16.00: RNCC: 5 | RNVC: 2
1H2H0A00261195: RNCC: 5 | RNVC: 2

2 May 2002

3040-01-299-7095
Spur Gearshaft

012997095
803-5001004-XXXX-49: RNCC: 3 | RNVC: 2
5001004-49: RNCC: 3 | RNVC: 2
5001004-XXXX-33-48: RNCC: 5 | RNVC: 2

4 May 1989

3040-01-325-4879
Pawl

013254879
D305450 PIECE 134: RNCC: 3 | RNVC: 9
E108496 PIECE 134: RNCC: 5 | RNVC: 9
C110611: RNCC: 5 | RNVC: 9
E108186 PIECE 134: RNCC: 5 | RNVC: 9
E108165 PIECE 134: RNCC: 5 | RNVC: 9
E105860 PIECE 134: RNCC: 5 | RNVC: 9
E108496: RNCC: D | RNVC: 9
E105860: RNCC: D | RNVC: 9
E108165: RNCC: D | RNVC: 9
D305450: RNCC: D | RNVC: 9

5 Sep 1990

3040-01-705-3955
Rigid Connecting Link

017053955
4971296-1: RNCC: 3 | RNVC: 2

19 Sep 2022

3040-01-705-9207
Bevel Gearshaft

017059207
3235194: RNCC: 3 | RNVC: 2

21 Oct 2022

3040-01-706-1011
Cylinder Support

017061011
P563661-C1: RNCC: 3 | RNVC: 2
P563662 REV D ITEM 2: RNCC: 5 | RNVC: 2
P563662: RNCC: D | RNVC: 9

1 Nov 2022

3040-01-706-2080
Linear Actuating Cylinder Piston

017062080
34510002: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-708-9089
Grease Cap

017089089
CJ655-9K-MOD: RNCC: 3 | RNVC: 2
7067897-69: RNCC: 5 | RNVC: 2
H696-1603-69: RNCC: C | RNVC: 1
7067897: RNCC: D | RNVC: 9

1 May 2023

3040-01-706-3747
Linear Actuating Cylinder Assembly

017063747
HYD-200-115: RNCC: 3 | RNVC: 2
HYD-200-115: RNCC: 5 | RNVC: 2

18 Nov 2022

3040-01-706-3630
Piston Ring

017063630
04287513: RNCC: 3 | RNVC: 2
0511 4520 ITEM 4: RNCC: 5 | RNVC: 2

18 Nov 2022

3040-01-706-2049
Linear Actuating Cylinder Piston

017062049
34511022: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-705-8127
Shouldered Shaft

017058127
8668869-010: RNCC: 3 | RNVC: 2
8668869: RNCC: D | RNVC: 9

14 Oct 2022

3040-01-706-6619
Linear Actuating Cylinder Piston

017066619
7383858-8483299-4: RNCC: 3 | RNVC: 2
H541-0255-4: RNCC: 5 | RNVC: 2
167-8483299-4: RNCC: 5 | RNVC: 9
H5470001-H5410255-4: RNCC: 5 | RNVC: 9
8483299: RNCC: D | RNVC: 9

12 Dec 2022

3040-01-707-1308
Rigid Connecting Link

017071308
ML2-11.68: RNCC: 3 | RNVC: 2

18 Jan 2023

3040-01-553-9492
Mechanical Drive Housing

015539492
77119700: RNCC: 3 | RNVC: 2
42295712: RNCC: 3 | RNVC: 9
77119700: RNCC: 5 | RNVC: 9
1089196: RNCC: 7 | RNVC: 2

27 Jul 2007

3040-01-707-1204
Linear Actuating Cylinder Piston

017071204
A8-20141: RNCC: 3 | RNVC: 2

18 Jan 2023

3040-01-707-8817
Flexible Casing End Fitting

017078817
8287240: RNCC: 3 | RNVC: 2

28 Feb 2023

3040-01-706-8293
Shouldered Shaft

017068293
8714685: RNCC: 3 | RNVC: 2

21 Dec 2022

3040-01-707-8156
Linear Actuating Cylinder Assembly

017078156
9D02599-1: RNCC: 3 | RNVC: 2

24 Feb 2023

3040-01-706-4154
Piston Ring

017064154
F.US216224.25.3: RNCC: 3 | RNVC: 2

22 Nov 2022

3040-01-707-1953
Shaft Collar

017071953
IC-075-Z: RNCC: 3 | RNVC: 2
13071355: RNCC: 7 | RNVC: 2

20 Jan 2023

3040-01-708-6438
Rigid Connecting Link

017086438
566-6985431-PN-1: RNCC: 3 | RNVC: 2
H623-0503-PN-1: RNCC: C | RNVC: 1

14 Apr 2023

3040-01-708-1565
Hydraulic Control Assembly

017081565
C29300-004: RNCC: 3 | RNVC: 2
C293000: RNCC: D | RNVC: 9

17 Mar 2023

3040-01-708-7351
Mechanical Drive Housing Part

017087351
551-7068554-2: RNCC: 3 | RNVC: 2
H845-1801-2: RNCC: 5 | RNVC: 2
551-7068554: RNCC: D | RNVC: 9

19 Apr 2023

3040-01-708-5229
Shouldered Shaft

017085229
N7237: RNCC: 3 | RNVC: 2

12 Apr 2023

3040-01-617-8435
Linear Actuating Cylinder Piston

016178435
EP-0032060: RNCC: 3 | RNVC: 2
050ME0011: RNCC: 3 | RNVC: 9

5 Apr 2013

3040-00-371-5584
Ball Joint

003715584
7372734: RNCC: 3 | RNVC: 2
7418397: RNCC: 3 | RNVC: 2
150-0638: RNCC: 3 | RNVC: 2
1111691: RNCC: 3 | RNVC: 2
08525ABI: RNCC: 5 | RNVC: 2
3H1902J2: RNCC: 5 | RNVC: 2
S12414: RNCC: 5 | RNVC: 2
191474: RNCC: 5 | RNVC: 2
527641: RNCC: 5 | RNVC: 2
109415: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-01-710-4619
Control Cam

017104619
845-7108792-58: RNCC: 3 | RNVC: 2
845-7108792 ITEM NUMBER 58: RNCC: C | RNVC: 1
845-7108792: RNCC: D | RNVC: 9

31 May 2023

3040-01-094-4917
Remote Control Lever

010944917
5100845: RNCC: 3 | RNVC: 2
5100844: RNCC: 5 | RNVC: 1
5100844: RNCC: 5 | RNVC: 9
3040010944917: RNCC: 6 | RNVC: 9

10 May 1980

3040-00-690-0642
Shouldered Shaft

006900642
415ND6282: RNCC: 3 | RNVC: 9
900171: RNCC: 5 | RNVC: 2
F-8278 PC1X: RNCC: 5 | RNVC: 9
NH7182PC415: RNCC: 5 | RNVC: 9
737120: RNCC: 5 | RNVC: 9
ND6282BPC415: RNCC: 5 | RNVC: 9
415ND6282: RNCC: 5 | RNVC: 9
H-8205PIECE 46: RNCC: 5 | RNVC: 9
ND6282PC415: RNCC: 5 | RNVC: 9
H-8188 PIECE 38: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-765-3384
Rigid Connecting Link

007653384
NAS359: RNCC: 3 | RNVC: 1
NAS359-61-390: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-151-6381
Push-Pull Control Assembly

011516381
065870-03-084.0: RNCC: 3 | RNVC: 2
D032377-003-84IN: RNCC: 3 | RNVC: 9
CC33007P: RNCC: 5 | RNVC: 2
32377-003-7FT: RNCC: 5 | RNVC: 9
33C 7FT: RNCC: 5 | RNVC: 9
33-C-84IN: RNCC: 5 | RNVC: 9
30P225: RNCC: 5 | RNVC: 9
MOR33C: RNCC: 5 | RNVC: 9
CC3300-0225: RNCC: 5 | RNVC: 9
33C 7FT: RNCC: 5 | RNVC: 9

20 Apr 1983

3040-01-154-6944
Rigid Connecting Link

011546944
74A450996-1003: RNCC: 3 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
PL74A450996 REV A: RNCC: 5 | RNVC: 9
74A450996-1003: RNCC: 5 | RNVC: 9
74A450996-1003: RNCC: 5 | RNVC: 9
74A450996-1003: RNCC: 5 | RNVC: 9

29 May 1983

3040-01-248-0527
Disk Brake Shoe

012480527
D-5206-0007: RNCC: 3 | RNVC: 9
DGR4350B PT70E: RNCC: 5 | RNVC: 1
DGR4350C PT70E: RNCC: 5 | RNVC: 1
D-5026-0007: RNCC: 5 | RNVC: 1
DGR4350C PT70EVM: RNCC: 5 | RNVC: 2
DGR4350B PT70E: RNCC: 5 | RNVC: 2
D-5206-0007VM: RNCC: 5 | RNVC: 2

15 Jan 1987

3040-01-366-9582
Linear Actuating Cylinder Assembly

013669582
7LSG1.50-11.50-NC-0.625-1-NPTF11: RNCC: 3 | RNVC: 2
7LG1.5X11.5NC 1 1: RNCC: 5 | RNVC: 9
23038641: RNCC: 7 | RNVC: 2

4 Nov 1992

3040-01-356-4589
Shouldered Shaft

013564589
12701506: RNCC: 3 | RNVC: 2
1863010W: RNCC: 5 | RNVC: 2
1863010W: RNCC: 5 | RNVC: 9

4 Apr 1992

3040-01-564-2055
Shoe Type Brake

015642055
3596011: RNCC: 1 | RNVC: 2
K027790: RNCC: 3 | RNVC: 2
BCA1208 PCD: RNCC: 3 | RNVC: 2
331229: RNCC: 5 | RNVC: 9
K027790: RNCC: 5 | RNVC: 9
3596011: RNCC: 5 | RNVC: 9

9 Jun 2008

3040-01-487-8480
Mechanically Actuated Spindle

014878480
124-5589896 PC 28: RNCC: 3 | RNVC: 2
124-4322648 PC 32: RNCC: 3 | RNVC: 2
124-4366739 PC 31: RNCC: 5 | RNVC: 2
124-4322651 PC 35: RNCC: 5 | RNVC: 2
124-4322652 PC 35: RNCC: 5 | RNVC: 2
124-5200227 PC 8: RNCC: 5 | RNVC: 2
124-4366739: RNCC: D | RNVC: 9
124-4322651: RNCC: D | RNVC: 9
124-4322652: RNCC: D | RNVC: 9
124-5589896: RNCC: D | RNVC: 9

21 Aug 2001

3040-01-564-2110
Shoe Type Brake

015642110
K027789: RNCC: 3 | RNVC: 2
BCA1209 PCD: RNCC: 3 | RNVC: 2
331228: RNCC: 5 | RNVC: 9
K027789: RNCC: 5 | RNVC: 9
14KP949: RNCC: 5 | RNVC: 9
3596010: RNCC: 5 | RNVC: 9
3596010: RNCC: 7 | RNVC: 2

9 Jun 2008

3040-01-261-1463
Extension Shaft

012611463
3825029: RNCC: 3 | RNVC: 2
3825029: RNCC: 3 | RNVC: 2
3825029: RNCC: 5 | RNVC: 2
3825029-2: RNCC: 5 | RNVC: 2
3825029: RNCC: 5 | RNVC: 9

9 Aug 1987

3040-01-710-6056
Counterbalance Weight

017106056
23087713-2: RNCC: 3 | RNVC: 2

9 Jun 2023

3040-01-710-4762
Shaft Retaining Plate

017104762
FA9734-02: RNCC: 3 | RNVC: 2

1 Jun 2023

3040-01-710-2666
Remote Control Lever

017102666
395515: RNCC: 3 | RNVC: 2
23869380: RNCC: 5 | RNVC: 2
7423869380: RNCC: 5 | RNVC: 2

20 May 2023

3040-01-710-4727
Nonvehicular Propeller Shaft

017104727
W084834592: RNCC: 3 | RNVC: 2

1 Jun 2023

3040-01-710-6386
Piston Ring

017106386
00-997698: RNCC: 3 | RNVC: 2

12 Jun 2023

3040-01-037-2750
Linear Actuating Cylinder Cap

010372750
R433092526: RNCC: 3 | RNVC: 2
P153809-0102: RNCC: 3 | RNVC: 9
P153809-0000: RNCC: 5 | RNVC: 9
P153687 PC 23: RNCC: 5 | RNVC: 9
P153809-0102: RNCC: 5 | RNVC: 9

16 Mar 1977

3040-01-710-9704
Shouldered Shaft

017109704
842121: RNCC: 3 | RNVC: 2

11 Jul 2023

3040-01-710-7660
Straight Shaft Assembly

017107660
112153039: RNCC: 3 | RNVC: 2

23 Jun 2023

3040-01-711-0712
Piston Ring

017110712
5146T81P04: RNCC: 3 | RNVC: 2
5146T81: RNCC: D | RNVC: 9

18 Jul 2023

3040-01-710-7472
Hub Clamp

017107472
001-000230-000: RNCC: 3 | RNVC: 2
DXE-RSB-I12500: RNCC: 5 | RNVC: 2

22 Jun 2023

3040-01-334-4902
Straight Shaft

013344902
RE548060: RNCC: 3 | RNVC: 2
RE519737: RNCC: 5 | RNVC: 9
R54986: RNCC: 5 | RNVC: 9
R54986: RNCC: 5 | RNVC: 9

23 Feb 1991

3040-00-735-1514
Shouldered Shaft

007351514
7351514: RNCC: 3 | RNVC: 2
7351514: RNCC: 5 | RNVC: 9
2920007351514: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-710-9074
Shouldered Shaft

017109074
00-971962: RNCC: 3 | RNVC: 2

7 Jul 2023

3040-01-707-6866
Shouldered Shaft

017076866
09203045-01: RNCC: 3 | RNVC: 2

16 Feb 2023

3040-00-390-8843
Straight Shaft

003908843
PT-822: RNCC: 3 | RNVC: 2
5192251: RNCC: 5 | RNVC: 2
519225: RNCC: 5 | RNVC: 9
266663R1: RNCC: 5 | RNVC: 9
266663R1: RNCC: 5 | RNVC: 9
K3307: RNCC: 5 | RNVC: 9
5192251: RNCC: 5 | RNVC: 9
4-410-140 ITEM 014: RNCC: 5 | RNVC: 9
2-778-998-06431: RNCC: 5 | RNVC: 9
5192251: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-254-3501
Push-Pull Control Assembly

012543501
7514-6014: RNCC: 3 | RNVC: 2
SR10784A-6774: RNCC: 5 | RNVC: 2
KSL125700BX-6014: RNCC: 5 | RNVC: 2
7014-137: RNCC: 5 | RNVC: 9
LE162-0002-6014: RNCC: 7 | RNVC: 2

5 May 1987

3040-01-252-4260
Mechanical Drive Housing

012524260
01-467-0108-3: RNCC: 3 | RNVC: 2
01-435-0212-5 PC31: RNCC: 5 | RNVC: 1
17700-391: RNCC: 5 | RNVC: 2

2 Apr 1987

3040-01-083-7491
Linear Actuating Cylinder Assembly

010837491
EE103448: RNCC: 3 | RNVC: 2
117402: RNCC: 5 | RNVC: 9
2590011200167: RNCC: 5 | RNVC: 9
EE103448: RNCC: 5 | RNVC: 9
3WB205: RNCC: E | RNVC: 8

29 Sep 1979

3040-01-182-6260
Rigid Connecting Link

011826260
7514-6021: RNCC: 3 | RNVC: 2
SR10784A-6021: RNCC: 5 | RNVC: 2
KSL125700BX-6021: RNCC: 5 | RNVC: 2
7014-141: RNCC: 5 | RNVC: 9
LE162-0002-6021: RNCC: 7 | RNVC: 2

26 Jun 1984

3040-00-027-2615
Differential Gear Unit

000272615
8587531: RNCC: 3 | RNVC: 2
8587531: RNCC: 5 | RNVC: 2
8587531: RNCC: 5 | RNVC: 2
8587531: RNCC: 5 | RNVC: 9
3040000272615: RNCC: 6 | RNVC: 9

2 May 1967

3040-01-102-7147
Flexible Drive Shaft

011027147
FA GEN 13AX1: RNCC: 3 | RNVC: 2
312-16202X: RNCC: 5 | RNVC: 9
3XR2306: RNCC: 5 | RNVC: 9
A-200-4050: RNCC: 5 | RNVC: 9
3XR23: RNCC: 5 | RNVC: 9
312-16202X: RNCC: 5 | RNVC: 9
3XR23: RNCC: 5 | RNVC: 9
3XR2306: RNCC: 5 | RNVC: 9
12273191: RNCC: 5 | RNVC: 9
3040011027147: RNCC: 6 | RNVC: 9

25 Oct 1980

Load More Results