3040-99-702-4363
Socket Ball Joint
3040997024363 997024363 S-639-05-19-A 170A-5310
Managed by United Kingdom
NSN Created on 1 Aug 1997
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 3040-99-702-4363
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3040-99-702-4363 5+ Documents (More...)
5310-98-207-6665 5310982076665 982076665 is a nut on which has been assembled a nonremovable washer. an integral feature is incorporated for locking on the threads of a mating member.
5310-14-554-2407 5310145542407 145542407 is a nut having 12 drive points, 24 sides, and an integral washer which extends beyond the points or periphery.
https//www.nsnlookup.com
/fsg-53/fsc-5310/us
/fsg-53/fsc-5310/us
5310-01-170-6233 Gang Channel Self-Locking Nut Assembly
5310-01-170-6233 5310011706233 011706233 is an item composed of a specially designed channel and a series of nuts having integral self-locking features assembled in predetermined spacing.
5310-01-170-2277 5310011702277 011702277 is a nut, flat on top and bottom having 6 flat sides. for items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see locknut, electrical conduit. see also locknut, tube fitting. for items having a thickness (or height) exceeding two times the width across the flats, use post, electrical-mechanical equipment. (when height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.)
5310-01-170-6264 5310011706264 011706264 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
Restrictions 3040-99-702-4363
End Users 3040-99-702-4363
- United Kingdom (ZK)
Approved Sources 3040-99-702-4363
- Part Number
- Manufacturer
- Status
- S-639-05-19-A
- Manufacturer
- K4944 - Bae Systems Surface Ships Limited (Active)
- Primary Buy
- Primary Buy
- 170A-5310
- K2516 - Ministry Of Defence (Navy) Ships (Active)
- Secondary Buy
- Secondary Buy
NATO Stock Numbers Related to 3040-99-702-4363
2510-15-209-3009 2520-99-446-6108 6220-15-204-1528 9999-37-515-0085 5310-15-139-2426 9915-15-219-4601 1730-25-105-4112 1220-14-266-0252 4030-15-175-3668 6685-14-380-3542 1560-99-601-1385 1680-99-600-3219 1005-13-103-5661 2540-15-138-4766 4920-14-441-3681 5340-14-436-9248 2910-12-148-8383 5820-15-138-1601