3040-99-192-0089

Shouldered Shaft

3040991920089 991920089 SSBN.01/510.01/401/001/140/42 QCA/SSBN01/510.01/401/001/140/42 SSBN01/510.01/401/001/140 SHEET- 510.01/401/001/140 PART 42 510.01/401/001/140 SHEET 5 510.01/401/001/140/42 SSBN01/510.01/401/001/140 PART -

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft