3040-27-014-6049
Remote Control Lever
3040270146049 270146049 2901620
A rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL. View more Remote Control Lever
Managed by Turkey
NSN Created on 13 Nov 2002
Data Last Changed
January 2023
January 2023
NATO Update Count
1
1
NATO Data Quality
Marketplace 3040-27-014-6049
Need Help?
Request a Quotation from participating marketplace vendors
Request a Quotation from participating marketplace vendors
Related Documents 3040-27-014-6049 5+ Documents (More...)
6675-22-290-1620 6675222901620 222901620
6210-01-290-1620 6210012901620 012901620 is a light, with mounting facilities furnished, designed to convey information of a specific nature concerning the circuit in which inserted. must include or provide for the use of a lens as a part of it. for items without a lens, see lampholder, and also see light (1), panel.
5310-00-290-1620 5310002901620 002901620 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.
https//www.nsnlookup.com
/fsg-26/fsc-2610/fr
/fsg-26/fsc-2610/fr
2610-14-290-1620 Vehicular Pneumatic Tire 2610142901620
2610-14-290-1620 2610142901620 142901620 is a mechanical device made of rubber, chemicals, fabric and steel or other materials, which, when mounted on a vehicular wheel, provides the traction and contains the fluid that sustains the load. tube type tires are a form to inclose an inner tube containing air under pressure. tubeless tires incorporate carcass materials and construction to provide fluid retention equal to that of a conventional tire and tube.
: 3 12 Mar 2002 3120-27-009-2665 Sleeve Bushing 2901916RNCC: 2 | RNVC: 1 | DAC: 3 5 Jun 2001 3040-27-014-6049
Restrictions 3040-27-014-6049
End Users 3040-27-014-6049
- Turkey (ZW)
Approved Sources 3040-27-014-6049
- Part Number
- Manufacturer
- Status
- 2901620
- Manufacturer
- T1259 - Mastas Mak.San.Tic.A.S. (Active)
- Related Standard
- Related Standard
NATO Stock Numbers Related to 3040-27-014-6049
2915-14-464-2426 3040-33-115-9012 3040-34-031-1667 2915-99-458-0503 1680-14-450-8758 3040-15-195-2189 3040-14-548-7627 3960-14-387-3491 3040-33-116-6710 3040-14-445-5582 3040-12-177-2275 3040-14-559-2330 3040-33-103-1684 3040-12-189-8097 3040-98-104-9679 1680-14-337-3329 1680-14-315-7093 3040-14-341-4845