What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.

What is a Linear Actuating Cylinder Assembly Parts Kit?

A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.

What is a Linear Actuating Cylinder Assembly?

A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Counterbalance Weight?

A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.

What is a Straight Axle?

A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Shouldered Axle?

A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.

What is a Shouldered Shaft Assembly?

A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.

What is a Mechanically Actuated Spindle?

A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)

What is a Nonaircraft Mechanical Actuator?

A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT

What is a Control Cam?

A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).

What is a Helical Gearshaft?

A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.

What is a Spur Gearshaft?

A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.

What is a Mechanical Drive Housing?

A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).

What is a Manual Control Lever?

A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.

Miscellaneous Power Transmission Equipment - Netherlands (NL)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by Netherlands (NL) - NCB is 17

Page 5 of 6

NSN Format for Miscellaneous Power Transmission Equipment
Codified by Netherlands

30	40	17	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - Netherlands (NL)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 16 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Friction Lining? 13 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 17 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 44 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Ball Joint? 23 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Worm Shaft? 25 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Shaft Retaining Plate? 18 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 15 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Hydraulic Accumulator? 16 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Rigid Connecting Link? 138 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 53 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 19 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 20 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Remote Control Lever? 94 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 77 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 192 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Bell Crank? 34 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Shouldered Shaft? 438 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Body Hub? 31 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 19 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Linear Actuating Cylinder Assembly? 174 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Counterbalance Weight? 15 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Straight Axle? 37 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 29 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 11 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Mechanically Actuated Spindle? 13 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
What is a Nonaircraft Mechanical Actuator? 13 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Control Cam? 35 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is a Helical Gearshaft? 12 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Spur Gearshaft? 73 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 54 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Manual Control Lever? 46 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.

Stock Items From Supply Class 3040 Page 5 of 6

3040-17-112-6952
Shouldered Axle

171126952
65.07.030-001: RNCC: 3 | RNVC: 2

19 Jul 1999

3040-17-121-1095
Pneumatic Actuator Cylinder Housing

171211095
8500-338-002: RNCC: 3 | RNVC: 2
8500-338-002: RNCC: 5 | RNVC: 2

21 Feb 2008

3040-17-023-4266
Pawl

170234266
00.140.1542: RNCC: 3 | RNVC: 2
00-140-1542: RNCC: 6 | RNVC: 9
19423-4: RNCC: 6 | RNVC: 9

21 Feb 1973

3040-17-049-0783
Blokkeerplaat

170490783
106-003-5Z: RNCC: 3 | RNVC: 2
NO PRIMARY REF 17-049-0783: RNCC: 3 | RNVC: 2
0106-003-005: RNCC: 5 | RNVC: 2
106-003-3-4-5: RNCC: 5 | RNVC: 9

12 Jan 1977

3040-17-116-4846
Shouldered Shaft

171164846
C25A0043A: RNCC: 3 | RNVC: 2

18 Mar 2004

3040-17-123-6131
Linear Actuating Cylinder

171236131
CIL-40/25/150(33241): RNCC: 3 | RNVC: 2
3-4501511394GRENDELCIL: RNCC: 5 | RNVC: 2

9 Mar 2011

3040-17-110-4894
Shouldered Shaft

171104894
2.85292.22: RNCC: 3 | RNVC: 2

2 Oct 1996

3040-17-023-7658
Stang

170237658
0190446: RNCC: 3 | RNVC: 2
190446: RNCC: 5 | RNVC: 9
EHR040-0030-164-013: RNCC: 6 | RNVC: 9

17 Jun 1972

3040-17-102-4586
Mechanical Drive Housing

171024586
JWK20VIERK12MM: RNCC: 3 | RNVC: 2

4 Aug 1988

3040-17-106-6411
Shaft Collar

171066411
04-06-20-18: RNCC: 3 | RNVC: 2

9 Sep 1992

3040-17-104-9417
Shouldered Shaft

171049417
352233511140: RNCC: 3 | RNVC: 2

4 Dec 1990

3040-17-104-4761
Straight Shaft

171044761
445379-POS17-4-110316: RNCC: 3 | RNVC: 2
445379-POS17-4-110316: RNCC: 5 | RNVC: 9

17 Jul 1990

3040-17-054-3770
Remote Control Lever

170543770
0651521: RNCC: 3 | RNVC: 2
651521: RNCC: 5 | RNVC: 9

11 May 1983

3040-17-102-7728
Remote Control Lever

171027728
2301F154: RNCC: 3 | RNVC: 2

3 Jan 1989

3040-17-114-4180
Control Cam

171144180
352232590340: RNCC: 3 | RNVC: 2

30 Oct 2001

3040-17-114-7222
Shouldered Axle

171147222
262601301ZT124: RNCC: 3 | RNVC: 2

19 Mar 2002

3040-17-053-4256
Plunjer

170534256
4502-34-10-00: RNCC: 3 | RNVC: 2

9 Dec 1983

3040-17-116-4343
Band Type Brake

171164343
W4-0171: RNCC: 3 | RNVC: 2

24 Feb 2004

3040-17-105-1173
Nonaircraft Mechanical Actuator

171051173
AB1950: RNCC: 3 | RNVC: 2

3 Apr 2007

3040-17-105-1792
Spur Gearshaft

171051792
352232563080: RNCC: 3 | RNVC: 2

31 Jan 1991

3040-17-051-9650
Shouldered Shaft

170519650
C69719LEG38: RNCC: 3 | RNVC: 2

2 Sep 1981

3040-17-102-4252
Geleide Stuk

171024252
69.11.015LEG5: RNCC: 3 | RNVC: 2

14 Jul 1988

3040-17-048-9389
Shouldered Shaft

170489389
0101759: RNCC: 3 | RNVC: 2
101759: RNCC: 5 | RNVC: 9

14 Dec 1976

3040-17-105-8599
Shouldered Shaft

171058599
FAN-SH017-000: RNCC: 3 | RNVC: 2
2.001978: RNCC: 5 | RNVC: 2

19 Sep 1991

3040-17-050-9210
Linear Actuating Cylinder Assembly

170509210
2-15356: RNCC: 3 | RNVC: 2
6641192: RNCC: 5 | RNVC: 2

31 Aug 1979

3040-17-112-9530
Linear Actuating Cylinder Assembly Parts Kit

171129530
96051 (SEAL KIT): RNCC: 3 | RNVC: 2

8 Dec 1999

3040-17-118-4228
M1 Idler

171184228
RE505265: RNCC: 3 | RNVC: 2

17 Mar 2006

3040-17-103-5678
Straight Shaft

171035678
FFVAOE-440030: RNCC: 3 | RNVC: 2

12 Sep 1989

3040-17-105-5108
Spur Gearshaft

171055108
352232364820: RNCC: 3 | RNVC: 2

7 May 1991

3040-17-046-8125
Hefboom

170468125
05-2-17-51A: RNCC: 3 | RNVC: 2

20 Dec 1978

3040-17-054-8108
Straight Shaft

170548108
0240610: RNCC: 3 | RNVC: 2
240610: RNCC: 5 | RNVC: 9

29 Nov 1983

3040-17-110-5267
Disk Brake Shoe

171105267
NO PRIMARY REF 17-110-5267: RNCC: 3 | RNVC: 2
VG4510099: RNCC: 5 | RNVC: 9

23 Oct 1996

3040-17-112-6957
Helical Gearshaft

171126957
65.12.040-002: RNCC: 3 | RNVC: 2

19 Jul 1999

3040-17-102-1073
Montagestrip

171021073
856.7280: RNCC: 3 | RNVC: 2

25 Mar 1988

3040-17-103-5153
Rigid Connecting Link

171035153
FFVAOE-440558: RNCC: 3 | RNVC: 2

23 Aug 1989

3040-17-053-6064
Gegroefd Getrapt As

170536064
VRI12C75: RNCC: 3 | RNVC: 2

25 Feb 1985

3040-17-049-8684
Straight Shaft

170498684
03-2-7016BL30P0S20B2: RNCC: 3 | RNVC: 2

31 Mar 1978

3040-17-105-5914
Straight Shaft

171055914
352233045310: RNCC: 3 | RNVC: 2

5 Jun 1991

3040-17-052-4135
Worm Shaft

170524135
79.131.1-08LEG1: RNCC: 3 | RNVC: 2
79.131.1-08LEG1: RNCC: 5 | RNVC: 9

15 Feb 1982

3040-17-044-4202
Drukring

170444202
4502-05-04-00: RNCC: 3 | RNVC: 2

17 Jun 1974

3040-17-051-7555
Shaft Collar

170517555
79.131.1-24LEG2: RNCC: 3 | RNVC: 2
79.131.1-24LEG2: RNCC: 5 | RNVC: 9

24 Mar 1981

3040-17-105-2519
Shouldered Shaft

171052519
6127308: RNCC: 3 | RNVC: 2

12 Feb 1991

3040-17-122-1791
Linear Actuating Cylinder Assembly

171221791
2 0157-706: RNCC: 3 | RNVC: 2

25 May 2009

3040-17-101-4282
Shouldered Shaft

171014282
895 783 173 4: RNCC: 3 | RNVC: 2

3 Jun 1987

3040-17-039-1440
Shouldered Shaft

170391440
06-01-30-34: RNCC: 3 | RNVC: 2

2 Dec 1971

3040-17-123-6043
Brake Band And Lining

171236043
NB 338-4401: RNCC: 3 | RNVC: 2

3 Mar 2011

3040-17-113-7990
Ball Joint

171137990
WG.8: RNCC: 3 | RNVC: 2

30 Jan 2001

3040-17-114-0665
Rigid Connecting Link

171140665
F3203-042-421: RNCC: 3 | RNVC: 2

30 May 2001

3040-17-103-4341
Linear Actuating Cylinder Assembly

171034341
FFVAOE-340337: RNCC: 3 | RNVC: 2

25 Jul 1989

3040-17-023-6190
Straight Shaft

170236190
0210063: RNCC: 3 | RNVC: 2
615-2-41-1LEG10: RNCC: 5 | RNVC: 2
210063: RNCC: 5 | RNVC: 9

24 Sep 1974

3040-17-123-3640
Hydraulic Cylinder

171233640
D50/25-55-TFE20-TS20C: RNCC: 3 | RNVC: 2

18 Oct 2010

3040-17-103-9042
Ball Joint

171039042
5038345: RNCC: 3 | RNVC: 2

9 Jan 1990

3040-17-100-4005
Kogelkoppeling Met

171004005
0840.764BLAD1-ELSO-8529-ONGEB.: RNCC: 3 | RNVC: 2

10 Dec 1985

3040-17-124-1379
Gasveer

171241379
02-83-2500-ADM-0000 ITEM 121: RNCC: 3 | RNVC: 2
WINCO Z0M0N47-20-130 3600N: RNCC: 3 | RNVC: 2

23 Dec 2011

3040-17-122-6889
Link

171226889
NO PRIMARY REF 17-122-6889: RNCC: 3 | RNVC: 2
72D015001-2019: RNCC: 5 | RNVC: 2

24 Nov 2009

3040-17-117-5286
Push-Pull Control Assembly

171175286
553178: RNCC: 3 | RNVC: 2

18 Mar 2005

3040-17-055-2268
Rigid Connecting Link

170552268
2-15426: RNCC: 3 | RNVC: 2
6641253: RNCC: 5 | RNVC: 2

8 May 1984

3040-17-111-7856
Linear Actuating Cylinder Assembly

171117856
09-08-04-01L: RNCC: 3 | RNVC: 2

16 Apr 1998

3040-17-121-8905
Linear Actuating Cylinder Assembly

171218905
756PA0023.1178.1: RNCC: 3 | RNVC: 2

28 Jan 2009

3040-17-035-1340
Remote Control Lever

170351340
739341: RNCC: 3 | RNVC: 2

18 Nov 1969

3040-17-101-6031
Bevel-Spur Gearshaft

171016031
8.9432.3070.0: RNCC: 3 | RNVC: 2
8.9432.3070.0: RNCC: 5 | RNVC: 1

29 Jul 1987

3040-17-053-6046
Tandwiel As

170536046
VBN1A97: RNCC: 3 | RNVC: 2
352231020720: RNCC: 5 | RNVC: 2

25 Feb 1985

3040-17-108-6276
Nonaircraft Mechanical Actuator

171086276
T-8241028-S/100MM/ITEM9: RNCC: 3 | RNVC: 2
T-8241028-S/100MM/ITEM9: RNCC: 5 | RNVC: 2

11 Jan 1995

3040-17-105-0524
Mechanical Drive Housing

171050524
A2-32006LEG8: RNCC: 3 | RNVC: 2

20 Dec 1990

3040-17-106-7114
Shouldered Shaft

171067114
J01037-03-1300P029 R BW02: RNCC: 3 | RNVC: 2
J01037-03-1300P029 R BW02: RNCC: 5 | RNVC: 9

14 Oct 1992

3040-17-100-4854
Worm Shaft

171004854
442509: RNCC: 3 | RNVC: 2

28 Jan 1986

3040-17-104-2137
Manual Control Lever

171042137
XX004-8446: RNCC: 3 | RNVC: 2

3 Apr 1990

3040-17-053-6386
Nok Schyf

170536386
A405003/3920500: RNCC: 3 | RNVC: 2

1 May 1985

3040-17-053-6031
Excenterflens

170536031
VRI24M13: RNCC: 3 | RNVC: 2

25 Feb 1985

3040-17-113-0982
Rigid Connecting Link

171130982
857.8621: RNCC: 3 | RNVC: 2

22 Feb 2000

3040-17-120-1187
Straight Axle

171201187
242366: RNCC: 3 | RNVC: 2

7 Feb 2007

3040-17-109-5484
Straight Shaft

171095484
94-294-00LEG53: RNCC: 3 | RNVC: 2

21 Nov 1995

3040-17-121-8642
As

171218642
262604005ZT137: RNCC: 3 | RNVC: 2
4830-014: RNCC: 3 | RNVC: 2

15 Jan 2009

3040-17-103-5989
Recht As

3040-17-055-4066
Cilindersamenstel

3040-17-052-5353
Rigid Connecting Link

170525353
3-17524: RNCC: 3 | RNVC: 2
6641311: RNCC: 5 | RNVC: 2

5 Apr 1982

3040-17-120-7714
Straight Shaft

171207714
450.534-004: RNCC: 3 | RNVC: 2

28 Sep 2007

3040-17-104-8373
Shouldered Shaft

171048373
352232535870: RNCC: 3 | RNVC: 2

20 Nov 1990

3040-17-123-6001
Remmoer

171236001
NB 311-4402-2: RNCC: 3 | RNVC: 2

2 Mar 2011

3040-17-050-2435
Shouldered Shaft

170502435
05-2-17-52: RNCC: 3 | RNVC: 2

14 Jul 1978

3040-17-106-2152
Manifoldblock

171062152
308.224 B: RNCC: 3 | RNVC: 2
308.224 B: RNCC: 5 | RNVC: 9

25 Feb 1992

3040-17-109-6324
Rotating Shaft Eye Bracket

171096324
XX005-7004: RNCC: 3 | RNVC: 2

12 Dec 1995

3040-17-111-6895
Straight Axle

171116895
37521-007-43: RNCC: 3 | RNVC: 2

19 Mar 1998

3040-17-102-6362
Rotating Shaft Eye Bracket

171026362
XX003-9937: RNCC: 3 | RNVC: 2

3 Nov 1988

3040-17-104-1424
Control Cam

171041424
2194-107BL4: RNCC: 3 | RNVC: 2

6 Mar 1990

3040-17-026-3866
Brake Backing Plate

170263866
0219471: RNCC: 3 | RNVC: 2
219471: RNCC: 5 | RNVC: 9

17 Jun 1972

3040-17-121-0584
As

171210584
3P6938: RNCC: 3 | RNVC: 2

5 Feb 2008

3040-17-054-6568
Afstandsbe Hefboom

3040-17-054-6558
Afstandsbe Hefboom

3040-17-054-6221
Pal

3040-17-121-6888
Hydraulic Accumulator

171216888
ELM1,4-350/90/F: RNCC: 3 | RNVC: 2
ELM1,4-350/90/F: RNCC: 3 | RNVC: 9

28 Oct 2008

3040-17-111-3227
Flexible Drive Shaft

171113227
0622546: RNCC: 3 | RNVC: 2
622546: RNCC: 5 | RNVC: 9

20 Nov 1997

3040-17-047-1652
Worm Shaft

170471652
WW 308 094 A: RNCC: 3 | RNVC: 2

7 Apr 1975

3040-17-048-9504
Piston Ring

170489504
A305472-4060011: RNCC: 3 | RNVC: 2

21 Dec 1976

3040-17-055-4596
Spur Gearshaft

170554596
828.4906.51: RNCC: 3 | RNVC: 2

25 Sep 1984

3040-17-112-7800
Control Cam

171127800
98X49X46: RNCC: 3 | RNVC: 2

15 Sep 1999

3040-17-103-0932
Shouldered Shaft

171030932
0653235: RNCC: 3 | RNVC: 2
653235: RNCC: 5 | RNVC: 9

1 Jan 2000

3040-17-113-0438
Extension Shaft

171130438
3LD9 122-2C: RNCC: 3 | RNVC: 2

26 Jan 2000

3040-17-103-0060
Manual Control Lever

171030060
XX004-0963: RNCC: 3 | RNVC: 2

11 Apr 1989

3040-17-053-6057
Gegroefd Getrapt As

170536057
VRI23B64: RNCC: 3 | RNVC: 2
352231082130: RNCC: 5 | RNVC: 2

25 Feb 1985

3040-17-102-4296
Straight Shaft

171024296
79.131.1-31POS1: RNCC: 3 | RNVC: 2
79.131.1-31LEG1: RNCC: 5 | RNVC: 2

14 Jul 1988

3040-17-116-9700
Rigid Connecting Link

171169700
S521F3275201: RNCC: 3 | RNVC: 2

7 Oct 2004

3040-17-121-6746
Straight Shaft

171216746
1319307: RNCC: 3 | RNVC: 2
1319 307: RNCC: 5 | RNVC: 2
8711426675377: RNCC: 5 | RNVC: 2

22 Oct 2008

3040-17-122-7839
Mechanically Actuated Spindle

171227839
ET237TM5RH-2: RNCC: 3 | RNVC: 2

31 Dec 2009

3040-17-046-0546
Aandrijfas

170460546
0246248: RNCC: 3 | RNVC: 2
246248: RNCC: 5 | RNVC: 9

21 Jan 1975

3040-17-109-9701
Linear Actuating Cylinder Assembly

171099701
2737.521: RNCC: 3 | RNVC: 2

20 Mar 1996

3040-17-112-6882
Straight Shaft

171126882
1319.315: RNCC: 3 | RNVC: 2
172H0207: RNCC: 5 | RNVC: 2

12 Jul 1999

3040-17-111-3813
Linear Actuating Cylinder Assembly

171113813
ACDK-80/40-760-R/E+G2-40B: RNCC: 3 | RNVC: 2

16 Dec 1997

3040-17-108-6274
Nonaircraft Mechanical Actuator

171086274
T-8221059-S/80MM/ITEM9: RNCC: 3 | RNVC: 2
T-8221059-S/80MM/ITEM9: RNCC: 5 | RNVC: 2

11 Jan 1995

3040-17-102-7733
Manual Control Lever

171027733
3003F184: RNCC: 3 | RNVC: 2

3 Jan 1989

3040-17-107-8217
Shouldered Shaft

171078217
2.80873.01: RNCC: 3 | RNVC: 2

1 Feb 1994

3040-17-114-6569
Shouldered Shaft

171146569
352233109440: RNCC: 3 | RNVC: 2

19 Feb 2002

3040-17-039-1447
Ontvanger

170391447
06-01-30BL11: RNCC: 3 | RNVC: 2

2 Dec 1971

3040-17-104-9966
Body Hub

171049966
352233124530: RNCC: 3 | RNVC: 2
352233124532D: RNCC: 5 | RNVC: 2

20 Dec 1990

3040-17-104-1678
Linear Actuating Cylinder Cap

171041678
6299734: RNCC: 3 | RNVC: 2

15 Mar 1990

3040-17-051-9901
Assamenstel

170519901
046-11-9775580: RNCC: 3 | RNVC: 2

21 Sep 1981

3040-17-050-5815
Spur Gearshaft

170505815
4705353: RNCC: 3 | RNVC: 2

20 Feb 1979

3040-17-118-1544
Shouldered Shaft

171181544
S521F3296202: RNCC: 3 | RNVC: 2

14 Dec 2005

3040-17-111-6994
Linear Actuating Cylinder Assembly Parts Kit

171116994
ACDK-60/35-220-SEALKIT: RNCC: 3 | RNVC: 2

23 Mar 1998

3040-17-114-7451
Linear Actuating Cylinder Assembly

171147451
DCD1713-76-97-3: RNCC: 3 | RNVC: 2
613934: RNCC: 5 | RNVC: 2

28 Mar 2002

3040-17-103-6043
Bevel Gearshaft

171036043
XX004-7184: RNCC: 3 | RNVC: 2

19 Sep 1989

3040-17-050-2379
Rigid Connecting Link

170502379
4-10654: RNCC: 3 | RNVC: 2
6632217: RNCC: 5 | RNVC: 2

11 Jul 1978

3040-17-123-2744
Ring Od-Box

171232744
R214375A: RNCC: 3 | RNVC: 2

1 Sep 2010

3040-17-105-1759
Shouldered Shaft

171051759
352233034220: RNCC: 3 | RNVC: 2

31 Jan 1991

3040-17-123-2980
Remote Control Lever

171232980
27926-9-2-0: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-17-111-7519
Shouldered Shaft

171117519
4933B 021: RNCC: 3 | RNVC: 2
SL6920-2-154-090: RNCC: 5 | RNVC: 2

7 Apr 1998

3040-17-103-9882
Linear Actuating Cylinder

171039882
5146671: RNCC: 3 | RNVC: 2

30 Jan 1990

3040-17-124-0942
Shaft Strongpoint

171240942
GENERIC-02-83-2500-PDM-1003: RNCC: 3 | RNVC: 2

2 Dec 2011

3040-17-105-4934
Shouldered Shaft

171054934
814419-8: RNCC: 3 | RNVC: 2

1 May 1991

3040-17-109-5886
Manual Control Lever

171095886
250041-180121.20: RNCC: 3 | RNVC: 2

28 Nov 1995

3040-17-049-6762
Hefboom As

170496762
0615644: RNCC: 3 | RNVC: 2
615644: RNCC: 5 | RNVC: 9

6 Dec 1977

3040-17-103-6901
Shouldered Shaft

171036901
C67804-121: RNCC: 3 | RNVC: 2

17 Oct 1989

3040-17-104-0314
Detent Plate

171040314
175G16900: RNCC: 3 | RNVC: 2

13 Feb 1990

3040-17-102-3929
Gasveer

171023929
352250042366: RNCC: 3 | RNVC: 2

29 Jun 1988

3040-17-105-5343
Isolatieas

171055343
352232695400: RNCC: 3 | RNVC: 2
NE206B18-B184: RNCC: 5 | RNVC: 2

14 May 1991

3040-17-054-5860
Linear Actuating Cylinder Assembly

170545860
853.7071: RNCC: 3 | RNVC: 2

7 Sep 1983

3040-17-110-7751
Control Pedal

171107751
K870: RNCC: 3 | RNVC: 2

11 Mar 1997

3040-17-118-1546
Shouldered Shaft

171181546
S521F3296204: RNCC: 3 | RNVC: 2

14 Dec 2005

3040-17-111-3807
Linear Actuating Cylinder Assembly

171113807
ACDGK25DO-60/40-2260-R1/2+GK25DO: RNCC: 3 | RNVC: 2

16 Dec 1997

3040-17-105-5037
Helical Gearshaft

171055037
852984-4: RNCC: 3 | RNVC: 2

1 May 1991

3040-17-125-1336
Counterbalance Weight

171251336
432.276: RNCC: 3 | RNVC: 2

16 Oct 2013

3040-17-045-9768
Pawl

170459768
WW 308 080 B: RNCC: 3 | RNVC: 2

25 Feb 1975

3040-17-101-1484
Shouldered Shaft

171011484
3.84505.21: RNCC: 3 | RNVC: 2

9 Dec 1986

3040-17-105-7219
Shouldered Shaft

171057219
2.85009.02-AISI316: RNCC: 3 | RNVC: 2

12 Jul 1991

3040-17-104-4048
Spanelement

171044048
100202: RNCC: 3 | RNVC: 2
SE18: RNCC: 3 | RNVC: 2

12 Jun 1990

3040-17-117-0714
Shouldered Axle

171170714
VRI70N104: RNCC: 3 | RNVC: 2

24 Nov 2004

3040-17-053-1241
Pneuma Geluiddemper

170531241
GD2: RNCC: 3 | RNVC: 2
2110842: RNCC: 5 | RNVC: 2

16 Feb 1982

3040-17-106-0163
Shouldered Shaft

171060163
352231290750: RNCC: 3 | RNVC: 2
VRI70A516: RNCC: 5 | RNVC: 2

19 Nov 1991

3040-17-025-8146
Nonrotating Shaft Eye Bracket

170258146
SVTG3450: RNCC: 3 | RNVC: 2
0210009: RNCC: 3 | RNVC: 2
210009: RNCC: 5 | RNVC: 9

17 Jun 1972

3040-17-124-4510
Koppeling

171244510
12C6X: RNCC: 3 | RNVC: 2

2 Aug 2012

3040-17-110-8710
Montageas Boven

171108710
23-11-00-01: RNCC: 3 | RNVC: 2
23110001: RNCC: 5 | RNVC: 9

6 May 1997

3040-17-106-9050
Shouldered Shaft

171069050
172H10900: RNCC: 3 | RNVC: 2

24 Dec 1992

3040-17-114-7343
Counterbalance Weight

171147343
352233037320: RNCC: 3 | RNVC: 2

26 Mar 2002

3040-17-052-1926
Shouldered Shaft

170521926
B211ADWB: RNCC: 3 | RNVC: 1
046-11-9776075: RNCC: 3 | RNVC: 2
2.81003.21: RNCC: 3 | RNVC: 2
046.11.9776075: RNCC: 5 | RNVC: 2

1 Oct 1981

3040-17-109-9174
Shouldered Shaft

171099174
A406740/1951200: RNCC: 3 | RNVC: 2

13 Mar 1996

3040-17-049-5099
Shouldered Shaft

170495099
432208190330: RNCC: 3 | RNVC: 2

8 Aug 1977

3040-17-116-6175
Rigid Connecting Link

171166175
312/169.4/0100: RNCC: 3 | RNVC: 2
312/169.4/0100: RNCC: 5 | RNVC: 2

28 Apr 2004

3040-17-105-5913
Straight Shaft

171055913
352233045320: RNCC: 3 | RNVC: 2

5 Jun 1991

3040-17-104-3339
Shouldered Shaft

171043339
352232581901: RNCC: 3 | RNVC: 2

10 May 1990

3040-17-043-2712
Brake Band And Lining

170432712
1077421: RNCC: 3 | RNVC: 2

11 Nov 1973

3040-17-111-3274
Disc Brake Caliper Assembly

171113274
SKD-50: RNCC: 3 | RNVC: 2

24 Nov 1997

3040-17-046-4058
Glydring

170464058
S30059-25: RNCC: 3 | RNVC: 2

22 Sep 1980

3040-17-050-5157
Shouldered Shaft

170505157
03-0-7015-1-2-4-5-6P0S30: RNCC: 3 | RNVC: 2
03-4-7015F0L40P0S30: RNCC: 5 | RNVC: 2

4 Jan 1979

3040-17-053-4548
Bevel Gearshaft

170534548
0149203: RNCC: 3 | RNVC: 2
149203: RNCC: 5 | RNVC: 9

9 Feb 1984

3040-17-110-8533
Rigid Connecting Link

171108533
W003700044: RNCC: 3 | RNVC: 2

22 Apr 1997

3040-17-113-3339
Shouldered Shaft

171133339
T003001507: RNCC: 3 | RNVC: 2
3001507: RNCC: 5 | RNVC: 2

31 May 2000

3040-17-116-8175
Friction Lining

171168175
2614-3016: RNCC: 3 | RNVC: 2

6 Jul 2004

3040-17-118-5636
Tool Bracket

171185636
15641191: RNCC: 3 | RNVC: 2

10 May 2006

3040-17-051-7559
Shaft Collar

170517559
79.131.1-20LEG2: RNCC: 3 | RNVC: 2
79.131.1-20LEG2: RNCC: 5 | RNVC: 9

24 Mar 1981

3040-17-120-4734
Belt-Chain Tension Adjusting Device

171204734
2 0121-668: RNCC: 3 | RNVC: 2

24 May 2007

3040-17-102-9414
Shouldered Shaft

171029414
PB24420C: RNCC: 3 | RNVC: 2

14 Mar 1989

3040-17-100-7732
Extension Shaft

171007732
352232340340: RNCC: 3 | RNVC: 2

3 Jun 1986

3040-17-112-4142
Electrical-Fluid Pressure Connector Assembly

171124142
955651931900: RNCC: 3 | RNVC: 2

1 Feb 1999

3040-17-106-3883
Shouldered Shaft

171063883
3300BL791: RNCC: 3 | RNVC: 2
2.006945: RNCC: 5 | RNVC: 2

29 Apr 1992

3040-17-114-4304
Shouldered Shaft

171144304
352232591960: RNCC: 3 | RNVC: 2

30 Oct 2001

3040-17-108-3821
Cilinder Pneumatisc

171083821
1242720: RNCC: 3 | RNVC: 2

20 Sep 1994

3040-17-101-6918
Body Hub

171016918
550538: RNCC: 3 | RNVC: 2

16 Sep 1987

3040-17-052-5134
Rigid Connecting Link

170525134
0669033: RNCC: 3 | RNVC: 2
669033: RNCC: 5 | RNVC: 9

26 Mar 1982

3040-17-054-4290
Body Hub

170544290
50A1105: RNCC: 3 | RNVC: 2

9 Jun 1983

3040-17-103-6441
Shouldered Shaft

171036441
39095: RNCC: 3 | RNVC: 2

1 Jan 2000

3040-17-118-7484
Asverlenging

171187484
86389BLEG5: RNCC: 3 | RNVC: 2

17 Jul 2006

3040-17-124-4306
Shouldered Shaft

171244306
CA97492-224: RNCC: 3 | RNVC: 2

17 Jul 2012

3040-17-103-9978
Hydraulic Accumulator Cylinder

171039978
755.023: RNCC: 3 | RNVC: 2

6 Feb 1990

3040-17-111-6985
Linear Actuating Cylinder Assembly Parts Kit

171116985
ACDGK25DO-50/35-900-SEALKIT: RNCC: 3 | RNVC: 2

20 Mar 1998

3040-17-124-6350
Linear Actuating Cylinder Piston Rod

171246350
55000050.72.001: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-17-116-5935
Shouldered Shaft

171165935
VAG16E51: RNCC: 3 | RNVC: 2

23 Apr 2004

3040-17-120-9426
Shouldered Shaft

171209426
9113009: RNCC: 3 | RNVC: 2

5 Dec 2007

3040-17-114-6762
Counterbalance Weight

171146762
352233031850: RNCC: 3 | RNVC: 2

25 Feb 2002

3040-17-050-3331
Mechanical Drive Housing

170503331
352232420180: RNCC: 3 | RNVC: 2

23 Aug 1978

3040-17-121-7154
Stootstang

171217154
27-0834110: RNCC: 3 | RNVC: 2

11 Nov 2008

3040-17-046-4078
Glydring

170464078
S3005826: RNCC: 3 | RNVC: 2

22 Sep 1980

3040-17-113-1123
Belt-Chain Tension Adjusting Device

171131123
859.8185: RNCC: 3 | RNVC: 2

22 Feb 2000

3040-17-053-3768
Shouldered Shaft

170533768
352232492220: RNCC: 3 | RNVC: 2
352232492221: RNCC: 5 | RNVC: 1

23 Jun 1983

3040-17-114-7824
Mechanical Drive Housing

171147824
352243271400: RNCC: 3 | RNVC: 2

16 Apr 2002

3040-17-106-5230
Koppeling

171065230
7402-23: RNCC: 3 | RNVC: 2
0000-26-159-4730: RNCC: 3 | RNVC: 2
0000-26-159-4730: RNCC: 5 | RNVC: 9
7402-23: RNCC: 5 | RNVC: 9

24 Jun 1992

3040-17-110-9290
Straight Shaft

171109290
172H0116: RNCC: 3 | RNVC: 2

3 Jun 1997

3040-17-031-6092
Groefring Manchet

170316092
1664-06-20-01: RNCC: 3 | RNVC: 2

5 Aug 1969

3040-17-123-8424
Extension Shaft

171238424
GENERIC-02-83-9300-ADM-0000: RNCC: 3 | RNVC: 2

2 Aug 2011

3040-17-109-2397
Rem Schijf

3040-17-114-8610
Rigid Connecting Link

171148610
352242291200: RNCC: 3 | RNVC: 2

16 May 2002

3040-17-118-0360
Flexible Drive Shaft

171180360
10-61-0000-003-1-LEG118: RNCC: 3 | RNVC: 2
127452: RNCC: 3 | RNVC: 2

1 Nov 2005

3040-17-025-1005
Straight Shaft

170251005
0232509: RNCC: 3 | RNVC: 2
232509: RNCC: 5 | RNVC: 9

17 Jun 1972

3040-17-031-6099
Zuigerstang

170316099
4502-06-10-00: RNCC: 3 | RNVC: 2

5 Aug 1969

3040-17-052-3274
Linear Actuating Cylinder Assembly

170523274
405395C: RNCC: 3 | RNVC: 2
405395C: RNCC: 5 | RNVC: 9
405395C: RNCC: 5 | RNVC: 9

28 Dec 1981

3040-17-111-4848
Mechanical Drive Housing

171114848
WKAB210: RNCC: 3 | RNVC: 2

26 Jan 1998

3040-17-102-7288
Shouldered Shaft

171027288
VSV88C33: RNCC: 3 | RNVC: 2

15 Dec 1988

3040-17-048-3473
Shouldered Shaft

170483473
352035014400: RNCC: 3 | RNVC: 2
EBM1A63: RNCC: 5 | RNVC: 2

3 Jun 1976

3040-17-042-7288
Shouldered Shaft

170427288
A001826-05301LEG11: RNCC: 3 | RNVC: 2
A303593-19502: RNCC: 3 | RNVC: 2

6 May 1973

3040-17-122-8788
Shouldered Shaft

171228788
131015: RNCC: 3 | RNVC: 2

18 Feb 2010

3040-17-054-5346
Shaft Collar

170545346
12250-40/10: RNCC: 3 | RNVC: 2
12250-40/10: RNCC: 5 | RNVC: 9

20 Jul 1983

3040-17-101-1469
Shouldered Shaft

171011469
2.84595.25: RNCC: 3 | RNVC: 2

9 Dec 1986

3040-17-106-8802
Remote Control Lever

171068802
172H20400: RNCC: 3 | RNVC: 2

16 Dec 1992

3040-17-115-4990
Band Type Brake

171154990
90171.113.00.00: RNCC: 3 | RNVC: 2

26 Feb 2003

3040-17-101-0888
Shouldered Shaft

171010888
2.83835.26: RNCC: 3 | RNVC: 2

11 Nov 1986

3040-17-047-1650
Pawl

170471650
NO PRIMARY REF 17-047-1650: RNCC: 3 | RNVC: 2
412M024: RNCC: 5 | RNVC: 9

23 Apr 1975

3040-17-109-8389
Pawl

171098389
6300-45/13: RNCC: 3 | RNVC: 2
6300-45/13: RNCC: 5 | RNVC: 9

20 Feb 1996

3040-17-103-2686
Linear Actuating Cylinder Assembly

171032686
GD-0-DS-0-63/30: RNCC: 3 | RNVC: 2

23 Jun 1989

3040-17-052-8818
Regelnaald

170528818
146389A: RNCC: 3 | RNVC: 2
146389A: RNCC: 5 | RNVC: 9
146389A: RNCC: 5 | RNVC: 9

7 Oct 1982

3040-17-108-1464
Extension Shaft

171081464
KL-0007: RNCC: 3 | RNVC: 2

14 Jun 1994

3040-17-123-2548
Gas Spring

171232548
MVT07503001TNSCM0155N: RNCC: 3 | RNVC: 2
MVT07503001T: RNCC: 5 | RNVC: 2

24 Aug 2010

3040-17-037-4552
Shouldered Shaft

170374552
20-6-25-12: RNCC: 3 | RNVC: 2

11 Feb 1971

3040-17-119-0672
Mechanical Drive Housing

171190672
690-090-0350: RNCC: 3 | RNVC: 2

1 Nov 2006

3040-17-110-7168
Shouldered Shaft

171107168
2.85235.11: RNCC: 3 | RNVC: 2

4 Feb 1997

3040-17-051-7650
Shouldered Shaft

170517650
HS288-2-1LEG11: RNCC: 3 | RNVC: 1

3 Apr 1981

3040-17-118-2469
Remote Control Lever

171182469
2 0072-352: RNCC: 3 | RNVC: 2

23 Jan 2006

3040-17-051-0593
Straight Shaft

170510593
3171086: RNCC: 3 | RNVC: 2

2 Nov 1979

3040-17-108-9670
Bell Crank

171089670
72530: RNCC: 3 | RNVC: 2
0159560: RNCC: 5 | RNVC: 2

30 May 1995

3040-17-121-2984
Linear Actuating Cylinder Assembly

171212984
DM 50/25/250 D: RNCC: 3 | RNVC: 2
2 0073-979: RNCC: 5 | RNVC: 2

20 May 2008

3040-17-051-9190
Shouldered Shaft

170519190
046-11-3485033: RNCC: 3 | RNVC: 2
046.11.3485033: RNCC: 5 | RNVC: 2

23 Jul 1981

3040-17-122-8061
Linear Actuating Cylinder Assembly

171228061
189-3190: RNCC: 3 | RNVC: 2
189-3190: RNCC: 5 | RNVC: 2
1893190: RNCC: 5 | RNVC: 2

14 Jan 2010

3040-17-108-1145
Mechanical Drive Housing

171081145
SITI MI150A 1:50: RNCC: 3 | RNVC: 2

25 May 1994

3040-17-111-1191
Pawl

171111191
921965: RNCC: 3 | RNVC: 2

12 Aug 1997

3040-17-105-7777
Pawl

171057777
83022-415: RNCC: 3 | RNVC: 2

6 Aug 1991

3040-17-111-1744
Shaft Collar

171111744
023.100.030.016: RNCC: 3 | RNVC: 2

9 Sep 1997

3040-17-102-0291
Brake Backing Plate

171020291
XX003-8978: RNCC: 3 | RNVC: 2

3 Mar 1988

3040-17-049-8682
Straight Shaft

170498682
03-2-7016BL30P0S20A2: RNCC: 3 | RNVC: 2

31 Mar 1978

3040-17-124-8942
Control Cable Assembly

171248942
LANYARD FOR SWITCH 3817092: RNCC: 3 | RNVC: 2

27 May 2013

3040-17-124-0543
Damping Shaft

171240543
GENERIC-02-83-2100-ADM-1100: RNCC: 3 | RNVC: 2

10 Nov 2011

3040-17-103-1623
Shouldered Shaft

171031623
1620SW107: RNCC: 3 | RNVC: 2

24 May 1989

3040-17-027-9500
Pawl

170279500
167235: RNCC: 3 | RNVC: 2
167235: RNCC: 5 | RNVC: 9

17 Jun 1972

3040-17-120-7032
Disc Brake Caliper Assembly

171207032
SKD-65: RNCC: 3 | RNVC: 2

30 Aug 2007

3040-17-122-8066
Linear Actuating Cylinder Assembly

171228066
191-6963: RNCC: 3 | RNVC: 2
191-6963: RNCC: 5 | RNVC: 2
1916963: RNCC: 5 | RNVC: 2

14 Jan 2010

3040-17-124-6040
Koppeling

171246040
21325461: RNCC: 3 | RNVC: 2

23 Nov 2012

3040-17-039-6133
Shouldered Shaft

170396133
DB6-41-009S13: RNCC: 3 | RNVC: 2
DB6-41-009: RNCC: 3 | RNVC: 2
DB6-4I009: RNCC: 3 | RNVC: 2

29 Jul 1972

3040-17-103-4241
Worm Shaft

171034241
W/A033-20-04LEG3: RNCC: 3 | RNVC: 2
WA52BLAD7: RNCC: 5 | RNVC: 2

19 Jul 1989

3040-17-110-9283
Shouldered Shaft

171109283
KGE12-5 POS1050 ART NR3.84341.21: RNCC: 3 | RNVC: 2

3 Jun 1997

3040-17-123-6423
Body Hub

171236423
214670 ITEM 01: RNCC: 3 | RNVC: 2

29 Mar 2011

3040-17-053-5492
Spur Gearshaft

170535492
352232511550: RNCC: 3 | RNVC: 2
352232511551A: RNCC: 5 | RNVC: 2

2 Oct 1984

3040-17-122-8069
Linear Actuating Cylinder Assembly

171228069
191-1139: RNCC: 3 | RNVC: 2
191-1139: RNCC: 5 | RNVC: 2
1911139: RNCC: 5 | RNVC: 2

14 Jan 2010

3040-17-105-4310
Linear Actuating Cylinder Assembly

171054310
133.463E: RNCC: 3 | RNVC: 2
133.463E: RNCC: 5 | RNVC: 9

3 Apr 1991

3040-17-118-4302
Repair Kit

171184302
A340 420 P: RNCC: 3 | RNVC: 2

17 Mar 2006

3040-17-047-7085
As

170477085
VRK6E34: RNCC: 3 | RNVC: 2
352231293030: RNCC: 5 | RNVC: 2

27 Jan 1976

3040-17-044-0249
Doorvoerbus

170440249
3606-01-06-00: RNCC: 3 | RNVC: 2

22 Apr 1974

3040-17-120-6901
Straight Shaft

171206901
612-100-0440: RNCC: 3 | RNVC: 2

23 Aug 2007

3040-17-117-9015
Mechanical Drive Housing

171179015
FIG.4003AB-880G-DN350MM: RNCC: 3 | RNVC: 2

6 Sep 2005

3040-17-048-4798
Shaft Collar

170484798
NO PRIMARY REF 17-048-4798: RNCC: 3 | RNVC: 2
0A00704LEG26: RNCC: 5 | RNVC: 9

30 Jun 1976

3040-17-101-2958
Rigid Connecting Link

171012958
523.33.000: RNCC: 3 | RNVC: 2

31 Mar 1987

3040-17-045-9764
Straight Shaft

170459764
WW 305 831 D: RNCC: 3 | RNVC: 2
583500230200: RNCC: 5 | RNVC: 2

25 Feb 1975

3040-17-123-4206
Straight Shaft

171234206
SHAFT PVV/PVQ 4-1X/A+LAGER: RNCC: 3 | RNVC: 2

10 Nov 2010

3040-17-116-6318
Hydraulic Accumulator Bladder

171166318
NO PRIMARY REF 17-116-6318: RNCC: 3 | RNVC: 2
A1-2-20197-00 ITEM 04.01A: RNCC: 5 | RNVC: 2

29 Apr 2004

3040-17-115-2185
Differential Spider

171152185
71.59.018.001: RNCC: 3 | RNVC: 2

22 Oct 2002

3040-17-053-4142
Smoorventiel

170534142
SVB1: RNCC: 3 | RNVC: 2
2170010: RNCC: 5 | RNVC: 2

11 Nov 1983

3040-17-103-9373
Gegr Cilinder Zadel

171039373
A-102G: RNCC: 3 | RNVC: 2

17 Jan 1990

3040-17-053-6244
Gegroefd Getrapt As

170536244
352231104630: RNCC: 3 | RNVC: 2
VRI62A11: RNCC: 5 | RNVC: 2

26 Feb 1985

3040-17-046-4057
Glydring

170464057
S30058-23: RNCC: 3 | RNVC: 2

22 Sep 1980

3040-17-050-6909
Straight Shaft

170506909
4-10197: RNCC: 3 | RNVC: 2
6632067: RNCC: 5 | RNVC: 2

24 Apr 1979

3040-17-051-6704
Pawl

170516704
144J14800: RNCC: 3 | RNVC: 2

14 Jan 1981

3040-17-049-7362
Worm Shaft

170497362
0509057: RNCC: 3 | RNVC: 2
509057: RNCC: 5 | RNVC: 9

6 Jan 1978

3040-17-116-6459
Shouldered Shaft

171166459
S521F3248104: RNCC: 3 | RNVC: 2

11 May 2004

3040-17-053-3770
Shouldered Shaft

170533770
352232069230: RNCC: 3 | RNVC: 2
352232069232: RNCC: 5 | RNVC: 1

23 Jun 1983

3040-17-711-0003
Oliekoeler Pyp

177110003
0246102: RNCC: 3 | RNVC: 2
246102: RNCC: 5 | RNVC: 9

25 Nov 1967

3040-17-004-4879
Plunjer Huis

170044879
4020079: RNCC: 3 | RNVC: 2
4026939: RNCC: 3 | RNVC: 2

17 Jun 1972

3040-17-103-0083
Pawl

171030083
GSV3248H-SPERRKLINKETAGESCHOSS: RNCC: 3 | RNVC: 2
GSV3248H-PAL DAGSCHOOT: RNCC: 3 | RNVC: 2

11 Apr 1989

3040-17-045-1794
Shaft Retaining Plate

170451794
1062: RNCC: 3 | RNVC: 1
250-251/1062: RNCC: 3 | RNVC: 2
HZTL415055P1: RNCC: 3 | RNVC: 2
250-251/1062: RNCC: 5 | RNVC: 2
1062: RNCC: 5 | RNVC: 2

22 Sep 1980

3040-17-009-7942
Worm Shaft

170097942
3040 018: RNCC: 3 | RNVC: 2

17 Jun 1972

3040-17-101-2234
Shouldered Shaft

171012234
240055: RNCC: 3 | RNVC: 2

28 Jan 1987

3040-17-054-4719
Remote Control Lever

170544719
0672952: RNCC: 3 | RNVC: 2
672952: RNCC: 5 | RNVC: 9

24 Jun 1983

3040-17-110-1598
Shouldered Shaft

171101598
XX006-5792: RNCC: 3 | RNVC: 2

15 May 1996

3040-17-109-8765
Linear Actuating Cylinder Assembly Parts Kit

171098765
93020.033: RNCC: 3 | RNVC: 2

27 Feb 1996

3040-17-111-2295
Rigid Connecting Link

171112295
NO PRIMARY REF 17-111-2295: RNCC: 3 | RNVC: 2
VG5460105: RNCC: 5 | RNVC: 9

3 Oct 1997

3040-17-107-2530
Bell Crank

171072530
1182162: RNCC: 3 | RNVC: 2
4101108: RNCC: 5 | RNVC: 2

11 May 1993

3040-17-050-8482
Straight Shaft

170508482
4-15419: RNCC: 3 | RNVC: 2
6641212: RNCC: 5 | RNVC: 2

16 Jul 1979

3040-17-043-1458
Invoerbus

170431458
4502-05-06-00: RNCC: 3 | RNVC: 2

4 Nov 1973

3040-17-123-6555
Netten Snijder

171236555
K71380-1: RNCC: 3 | RNVC: 2

4 Apr 2011

3040-17-102-3338
Remote Control Lever

171023338
XX004-0962: RNCC: 3 | RNVC: 2

1 Jun 1988

3040-17-122-8065
Linear Actuating Cylinder Assembly

171228065
188-8064: RNCC: 3 | RNVC: 2
188-8064: RNCC: 5 | RNVC: 2
1888064: RNCC: 5 | RNVC: 2

14 Jan 2010

3040-17-113-2221
Piston Ring

171132221
114.35.07.062: RNCC: 3 | RNVC: 2

28 Mar 2000

3040-17-124-9923
Shouldered Axle

171249923
8008.2454: RNCC: 3 | RNVC: 2

24 Jul 2013

3040-17-003-4684
Shaft Collar

170034684
6002492: RNCC: 3 | RNVC: 2

17 Jun 1972

3040-17-053-4068
Inschroefkoppeling

170534068
1003-91-04-10: RNCC: 3 | RNVC: 2

13 Oct 1983

3040-17-122-8933
Linear Actuating Cylinder

171228933
C20H63/45/100KT5A10P1SP: RNCC: 3 | RNVC: 2

1 Mar 2010

3040-17-114-7724
Linear Actuating Cylinder Assembly

171147724
DCD1810-73-98/4: RNCC: 3 | RNVC: 2
0677132: RNCC: 5 | RNVC: 2

10 Apr 2002

3040-17-123-8426
Extension Shaft

171238426
GENERIC-02-83-9300-ADM-0020: RNCC: 3 | RNVC: 2

2 Aug 2011

3040-17-031-2723
Push-Pull Control Assembly

170312723
4500-07-44-00: RNCC: 3 | RNVC: 2
85-657-6507: RNCC: 6 | RNVC: 9

19 May 1974

3040-17-027-9512
Pawl

170279512
165764: RNCC: 3 | RNVC: 2
165764: RNCC: 5 | RNVC: 9

17 Jun 1972

3040-17-049-9896
Shouldered Shaft

170499896
352232192610: RNCC: 3 | RNVC: 2

7 Jun 1978

3040-17-049-0786
Shouldered Shaft

170490786
106-003-3Z: RNCC: 3 | RNVC: 2
0106-003-003: RNCC: 5 | RNVC: 2
106-003-3-4-5: RNCC: 5 | RNVC: 9

12 Jan 1977

3040-17-111-6933
Straight Axle

171116933
37521-107-2: RNCC: 3 | RNVC: 2

19 Mar 1998

3040-17-113-2423
Mechanical Drive Housing

171132423
AB210/07-SG200-VK12: RNCC: 3 | RNVC: 2
NYW13401VK12: RNCC: 3 | RNVC: 2

7 Apr 2000

3040-17-124-5926
Straight Axle

171245926
E1031-12-P9: RNCC: 3 | RNVC: 2
TNU-40-LILA-BRONS-P9: RNCC: 3 | RNVC: 2

19 Nov 2012

3040-17-056-7262
Cardan Shaft

170567262
945.01.10.003: RNCC: 3 | RNVC: 2
TR782223958: RNCC: 5 | RNVC: 1

18 Mar 1997

3040-17-122-1858
Shouldered Shaft

171221858
2 0157-770: RNCC: 3 | RNVC: 2

25 May 2009

3040-17-114-6628
Linear Actuating Cylinder Assembly

171146628
44994-01602: RNCC: 3 | RNVC: 2
410RF02136 ITEM 092: RNCC: 5 | RNVC: 2
410RF02136/092: RNCC: 5 | RNVC: 2

19 Feb 2002

3040-17-105-2830
Houder-Deksel

171052830
1174590: RNCC: 3 | RNVC: 2
5068729: RNCC: 3 | RNVC: 2

19 Feb 1991

3040-17-123-5170
Adaptor

171235170
262605402ZT142: RNCC: 3 | RNVC: 2
1910-002: RNCC: 3 | RNVC: 2

24 Jan 2011

3040-17-043-3551
Shouldered Shaft

170433551
094C14400: RNCC: 3 | RNVC: 2

25 Mar 1974

3040-17-105-9939
Mechanical Drive Housing

171059939
352243407300: RNCC: 3 | RNVC: 2

12 Nov 1991

3040-17-046-2297
Shaft Collar

170462297
VBM95A60: RNCC: 3 | RNVC: 2
352231017020: RNCC: 5 | RNVC: 2

18 Feb 1975

3040-17-114-6005
Push-Pull Control Assembly

171146005
25280-1383: RNCC: 3 | RNVC: 2

5 Feb 2002

3040-17-103-1812
Mechanical Drive Housing

171031812
0371504: RNCC: 3 | RNVC: 2
371504: RNCC: 5 | RNVC: 9

5 Jun 1989

3040-17-112-2879
Hydrau Aansluitblok

171122879
37647-04-LINKS: RNCC: 3 | RNVC: 2

20 Nov 1998

3040-17-101-6107
Straight Shaft

171016107
660409: RNCC: 3 | RNVC: 2

4 Aug 1987

3040-17-050-3025
Shouldered Shaft

170503025
05-2-18-52: RNCC: 3 | RNVC: 2

7 Aug 1978

3040-17-036-9494
Spur Gearshaft

170369494
432208155731: RNCC: 3 | RNVC: 2

14 Jan 1971

3040-17-046-2308
Shaft Collar

170462308
VAG14D73: RNCC: 3 | RNVC: 2
352235099250: RNCC: 5 | RNVC: 2

18 Feb 1975

3040-17-120-9416
Hydraulic Control Assembly

171209416
3550255: RNCC: 3 | RNVC: 2

5 Dec 2007

3040-17-111-6891
Straight Axle

171116891
37521-007-3: RNCC: 3 | RNVC: 2

19 Mar 1998

3040-17-109-9926
Linear Actuating Cylinder Head

171099926
A303760/4314300: RNCC: 3 | RNVC: 2
W004314300: RNCC: 5 | RNVC: 2
W004314300: RNCC: 5 | RNVC: 2

3 Apr 1996

3040-17-055-6517
Set Geleideringen

170556517
017.50.094: RNCC: 3 | RNVC: 2
0823822: RNCC: 5 | RNVC: 2
823822: RNCC: 5 | RNVC: 9

21 Dec 1984

3040-17-123-2291
Rigid Connecting Link

171232291
961396: RNCC: 3 | RNVC: 2
C961396: RNCC: 5 | RNVC: 2

11 Aug 2010

3040-17-117-0975
Shaft Collar

171170975
352232076090: RNCC: 3 | RNVC: 2

25 Nov 2004

3040-17-101-6370
Shouldered Shaft

171016370
NO PRIMARY REF 17-101-6370: RNCC: 3 | RNVC: 2
41A-00593: RNCC: 5 | RNVC: 9

18 Aug 1987

3040-17-117-7329
Pawl

171177329
666632: RNCC: 3 | RNVC: 2

6 Jun 2005

3040-17-025-2911
Straight Shaft

170252911
0232510: RNCC: 3 | RNVC: 2
232510: RNCC: 5 | RNVC: 9

17 Jun 1972

3040-17-055-6702
Pawl

170556702
3111-0020: RNCC: 3 | RNVC: 2
3111-0020: RNCC: 5 | RNVC: 2

7 Jan 1985

3040-17-115-1445
Flexible Drive Shaft

171151445
AA795100: RNCC: 3 | RNVC: 2

10 Sep 2002

3040-17-050-3026
Shouldered Shaft

170503026
05-2-18BLAD4: RNCC: 3 | RNVC: 2

7 Aug 1978

3040-17-102-0084
Linear Actuating Cylinder Assembly

171020084
0296979: RNCC: 3 | RNVC: 2
296979: RNCC: 5 | RNVC: 9

23 Feb 1988

3040-17-116-0173
Rigid Connecting Link

171160173
RS155-30: RNCC: 3 | RNVC: 2

19 Sep 2003

3040-17-039-6152
Hefboomsarmsamenste

170396152
1132-02-9-11A8: RNCC: 3 | RNVC: 2
1132-02-9-11: RNCC: 3 | RNVC: 2

12 Aug 1972

3040-17-109-9169
Straight Shaft

171099169
A404709/1951100: RNCC: 3 | RNVC: 2

13 Mar 1996

3040-17-109-9462
Brake Band And Lining

171099462
C8-8: RNCC: 3 | RNVC: 2
C5-214/1 ITEM 39: RNCC: 5 | RNVC: 2

20 Mar 1996

3040-17-117-6435
Shouldered Shaft

171176435
9029015: RNCC: 3 | RNVC: 2

3 May 2005

3040-17-048-4950
Tandwiel

170484950
VBA201D62: RNCC: 3 | RNVC: 2
352231286960: RNCC: 5 | RNVC: 2

1 Jul 1976

3040-17-109-1923
Straight Shaft

171091923
5722SP-3: RNCC: 3 | RNVC: 2
EA00786: RNCC: 5 | RNVC: 2

5 Sep 1995

3040-17-053-4269
Cilindervoet

170534269
3606-01-01-00: RNCC: 3 | RNVC: 2

16 Dec 1983

3040-17-050-6185
Shouldered Shaft

170506185
H76869S1A: RNCC: 3 | RNVC: 2
2.008594: RNCC: 5 | RNVC: 2
H76869S1A: RNCC: 5 | RNVC: 9

8 Mar 1979

3040-17-113-2347
Mechanical Drive Housing

171132347
NYW13401VK16: RNCC: 3 | RNVC: 2
AB210/07-SG200-VK16: RNCC: 3 | RNVC: 2
2.006331: RNCC: 5 | RNVC: 2

5 Apr 2000

3040-17-100-8413
Hefboom

171008413
027U00300: RNCC: 3 | RNVC: 2

8 Jul 1986

3040-17-113-5649
Shouldered Axle

171135649
VRI70A421: RNCC: 3 | RNVC: 2

21 Sep 2000

3040-17-121-6501
Manual Control Lever Assembly

171216501
184-6761: RNCC: 3 | RNVC: 2
184-6761: RNCC: 5 | RNVC: 2

13 Oct 2008

3040-17-105-5316
Aseind Opsluitstuk

171055316
W004352346: RNCC: 3 | RNVC: 2

14 May 1991

3040-17-122-0327
Remschijf

171220327
REMSCHIJF T.B.V. NITCHI H-50A: RNCC: 3 | RNVC: 2

24 Mar 2009

3040-17-123-3149
Bell Crank

171233149
113801: RNCC: 3 | RNVC: 2

27 Sep 2010

3040-17-105-9027
Remote Control Lever

171059027
VAG16C39: RNCC: 3 | RNVC: 2

1 Oct 1991

3040-17-120-8274
Manual Control Lever

171208274
352243364000: RNCC: 3 | RNVC: 2
3522 433 64000: RNCC: 5 | RNVC: 2

25 Oct 2007

3040-17-048-4978
As

170484978
NE18A4X11-7X24: RNCC: 3 | RNVC: 2
352230004490: RNCC: 5 | RNVC: 2

1 Jul 1976

3040-17-710-9293
Shouldered Shaft

177109293
0140246: RNCC: 3 | RNVC: 2
140246: RNCC: 5 | RNVC: 9
2-369-40-18-00-000: RNCC: 6 | RNVC: 9

25 Nov 1968

3040-17-104-0262
Linear Actuating Cylinder Assembly

171040262
DCD1613-76-97: RNCC: 3 | RNVC: 2

13 Feb 1990

3040-17-045-9754
Pawl

170459754
WW 416 522 A: RNCC: 3 | RNVC: 2
583500232100: RNCC: 5 | RNVC: 2

18 Nov 1974

3040-17-112-4827
Linear Actuating Cylinder Assembly Parts Kit

171124827
ACDB-110/50-770+1G-40B-SEALKIT: RNCC: 3 | RNVC: 2

16 Mar 1999

3040-17-115-9241
Linear Actuating Cylinder Assembly

171159241
498-7322: RNCC: 3 | RNVC: 2

14 Aug 2003

3040-17-123-7964
Band Type Brake

171237964
503 70 44-01: RNCC: 3 | RNVC: 2

29 Jun 2011

3040-17-045-9772
Pawl

170459772
WW 423 342 A: RNCC: 3 | RNVC: 2

25 Feb 1975

3040-17-026-3867
Brake Backing Plate

170263867
0219472: RNCC: 3 | RNVC: 2
219472: RNCC: 5 | RNVC: 9

17 Jun 1972

3040-17-054-2093
Bediening Stang

170542093
0670856: RNCC: 3 | RNVC: 2
670856: RNCC: 5 | RNVC: 9

9 Mar 1983

3040-17-116-1272
Shouldered Shaft

171161272
160-441-0700: RNCC: 3 | RNVC: 2

20 Jul 2000

3040-17-108-3452
Shouldered Shaft

171083452
T003001449: RNCC: 3 | RNVC: 2

30 Aug 1994

3040-17-100-6076
Rechte T Tandwielas

171006076
VRI22C56: RNCC: 3 | RNVC: 2

23 Mar 1986

3040-17-109-1861
Shouldered Shaft

171091861
2.85300.21: RNCC: 3 | RNVC: 2

29 Aug 1995

3040-17-111-7586
Mechanical Drive Housing

171117586
WKAB880: RNCC: 3 | RNVC: 2
2.006337: RNCC: 5 | RNVC: 2

9 Apr 1998

3040-17-118-6764
Pivot Shaft Assembly

171186764
HLD152-091: RNCC: 3 | RNVC: 2

26 Jun 2006

3040-17-051-7107
Shouldered Shaft

170517107
A307914-1950079: RNCC: 3 | RNVC: 2

6 Feb 1981

3040-17-119-0966
Linear Actuating Cylinder

171190966
6101001/75150250AA GASDRUKVEER: RNCC: 3 | RNVC: 2
6-15-100-1/75N-150-250-A-A: RNCC: 3 | RNVC: 2

13 Nov 2006

3040-17-053-4307
Straight Shaft

170534307
6832-704: RNCC: 3 | RNVC: 2
5-212-0014: RNCC: 5 | RNVC: 2

12 Jan 1984

3040-17-115-1849
As

171151849
2141.91.1.16: RNCC: 3 | RNVC: 2

8 Oct 2002

3040-17-102-4250
Geleide Stuk

171024250
69.11.015LEG3: RNCC: 3 | RNVC: 2

14 Jul 1988

3040-17-051-0233
Linear Actuating Cylinder

170510233
BCI10-2: RNCC: 3 | RNVC: 2

5 Dec 1978

3040-17-108-4346
Linear Actuating Cylinder Assembly

171084346
03.018.276A1: RNCC: 3 | RNVC: 2
03.018.276A1: RNCC: 5 | RNVC: 9

12 Oct 1994

3040-17-111-0306
Straight Axle

171110306
208375: RNCC: 3 | RNVC: 2
1337929: RNCC: 5 | RNVC: 2

22 Jul 1997

3040-17-114-7522
Linear Actuating Cylinder Assembly

171147522
03-051620A0: RNCC: 3 | RNVC: 2
03-051620A0: RNCC: 5 | RNVC: 9

2 Apr 2002

3040-17-115-1623
Straight Axle

171151623
352236050640: RNCC: 3 | RNVC: 2

23 Sep 2002

3040-17-054-2460
Ball Joint

170542460
0656085: RNCC: 3 | RNVC: 2
656085: RNCC: 5 | RNVC: 9

24 Mar 1983

3040-17-105-7101
Manual Control Lever

171057101
352243363700: RNCC: 3 | RNVC: 2

12 Jul 1991

3040-17-049-5289
Assamenstel

170495289
44-2-021LEG4-22-23: RNCC: 3 | RNVC: 2

31 Aug 1977

3040-17-027-3026
Pawl

170273026
625641: RNCC: 3 | RNVC: 2

17 Jun 1972

3040-17-123-3414
Linear Actuating Cylinder

171233414
1821 691.0: RNCC: 3 | RNVC: 2

7 Oct 2010

3040-17-122-9170
Bell Crank

171229170
27926-9-0: RNCC: 3 | RNVC: 2

12 Mar 2010

3040-17-115-2734
Oil Distribution Box Shaft Assembly

171152734
W000401237: RNCC: 3 | RNVC: 2
RO 260-3N: RNCC: 5 | RNVC: 1

15 Nov 2002

3040-17-101-0240
Straight Shaft

171010240
EC80L: RNCC: 3 | RNVC: 2
EC80L: RNCC: 5 | RNVC: 2

7 Oct 1986

3040-17-113-2823
Mechanical Drive Housing

171132823
AWAB550-F12DD0E: RNCC: 3 | RNVC: 2
MAR-217-DN200-LEG3: RNCC: 3 | RNVC: 2

3 May 2000

3040-17-106-7920
Mechanical Drive Housing

171067920
C7-560: RNCC: 3 | RNVC: 2

25 Nov 1992

3040-17-039-1445
Straight Shaft

170391445
06-01-30-54: RNCC: 3 | RNVC: 2

2 Dec 1971

3040-17-107-1005
Worm Shaft

171071005
352231227750: RNCC: 3 | RNVC: 2
VBN22A81: RNCC: 5 | RNVC: 2

16 Mar 1993

3040-17-105-3449
Regelnaald

171053449
133.525B L=81MM: RNCC: 3 | RNVC: 2
133.525B L=81MM: RNCC: 5 | RNVC: 9

14 Mar 1991

3040-17-120-0115
Linear Actuating Cylinder Assembly

171200115
W000560000: RNCC: 3 | RNVC: 2
A103682/0560000B: RNCC: 5 | RNVC: 2

19 Dec 2006

3040-17-047-0952
Recht Tandwielas

3040-17-120-5744
Hydraulic Accumulator

171205744
150-1315-082-711: RNCC: 3 | RNVC: 2

28 Jun 2007

3040-17-117-9018
Shaft Primary

171179018
853809: RNCC: 3 | RNVC: 2

6 Sep 2005

3040-17-109-5483
Straight Shaft

171095483
94-294-00LEG27: RNCC: 3 | RNVC: 2

21 Nov 1995

3040-17-124-8586
Linear Actuating Cylinder Assembly Parts Kit

171248586
RE2008001: RNCC: 3 | RNVC: 2
RE2008001: RNCC: 5 | RNVC: 2

29 Apr 2013

3040-17-100-9994
Worm Shaft

171009994
1004503: RNCC: 3 | RNVC: 2

2 Oct 1986

3040-17-003-4683
Shaft Collar

170034683
6115945: RNCC: 3 | RNVC: 2
6153200: RNCC: 3 | RNVC: 2

17 Jun 1972

3040-17-114-6249
Shouldered Axle

171146249
352233054580: RNCC: 3 | RNVC: 2

12 Feb 2002

3040-17-054-2703
Linear Actuating Cylinder

170542703
0641957: RNCC: 3 | RNVC: 2
641957: RNCC: 5 | RNVC: 9

5 Apr 1983

3040-17-121-0471
Pal

171210471
C/85 - OMKEERPAL(102135): RNCC: 3 | RNVC: 2

30 Jan 2008

3040-17-032-1140
Ball Joint

170321140
449623: RNCC: 3 | RNVC: 2

17 Jun 1972

3040-17-124-5609
Shouldered Shaft

171245609
2 0000-498: RNCC: 3 | RNVC: 2

30 Oct 2012

3040-17-118-0227
Remote Control Lever

171180227
34770: RNCC: 3 | RNVC: 2

25 Oct 2005

3040-17-123-6002
Rem Stang

171236002
NB 311-4405-1: RNCC: 3 | RNVC: 2

2 Mar 2011

3040-17-100-6435
Kleminrichting

171006435
10714-0000-0501 WKT01: RNCC: 3 | RNVC: 2

10 Apr 1986

3040-17-106-5144
Zuigerstang Ring

3040-17-112-5306
Linear Actuating Cylinder Assembly

171125306
ACDK-60/35-686-R/E+G2-35B-LINKS: RNCC: 3 | RNVC: 2

29 Mar 1999

3040-17-102-6160
Remote Control Lever

171026160
2301R238: RNCC: 3 | RNVC: 2

19 Oct 1988

3040-17-112-5187
Linear Actuating Cylinder Assembly

171125187
ACDB-110/50-770+G1-40B: RNCC: 3 | RNVC: 2

23 Mar 1999

3040-17-102-4509
Mechanical Drive Housing

171024509
7248: RNCC: 3 | RNVC: 9
HWO-50 5IN-6IN: RNCC: 3 | RNVC: 9

28 Jul 1988

3040-17-118-3971
Straight Shaft Assembly

171183971
D4-0490-1: RNCC: 3 | RNVC: 2

10 Mar 2006

3040-17-110-8571
Gear Sector Assy

171108571
21.02402.23: RNCC: 3 | RNVC: 2

22 Apr 1997

3040-17-123-4603
Rigid Connecting Link

171234603
S322F1655150: RNCC: 3 | RNVC: 2

10 Dec 2010

3040-17-111-7096
Sensor Positie Opne

171117096
3.033704: RNCC: 3 | RNVC: 2
CIMS-MK1-IP67-1560/220: RNCC: 5 | RNVC: 2
3.033704: RNCC: 5 | RNVC: 9
CIMS-MK1-IP67-1560/220: RNCC: 5 | RNVC: 9

25 Mar 1998

3040-17-027-1578
Control Cam

170271578
55191424: RNCC: 3 | RNVC: 2
NE129-1: RNCC: 3 | RNVC: 2
352242006200: RNCC: 5 | RNVC: 2

21 Aug 1968

3040-17-050-9432
Linear Actuating Cylinder Assembly

170509432
2-15363: RNCC: 3 | RNVC: 2
6641190: RNCC: 5 | RNVC: 2

12 Sep 1979

3040-17-113-2780
Shoe Type Brake

171132780
66.22.006: RNCC: 3 | RNVC: 2

2 May 2000

3040-17-107-1225
Shouldered Shaft

171071225
MJ332-3019-POS38: RNCC: 3 | RNVC: 2

23 Mar 1993

3040-17-123-6045
Remmoer

171236045
NB 338-4402-1: RNCC: 3 | RNVC: 2

3 Mar 2011

3040-17-112-5322
Linear Actuating Cylinder Assembly

171125322
ACDH-40/25-220-R/E+G2-20B: RNCC: 3 | RNVC: 2

29 Mar 1999

3040-17-125-0421
Shaft Collar

171250421
024-000011-000: RNCC: 3 | RNVC: 2
024-000011-000: RNCC: 5 | RNVC: 2

29 Aug 2013

3040-17-122-0381
Linear Actuating Cylinder Assembly

171220381
71504392: RNCC: 3 | RNVC: 2

26 Mar 2009

3040-17-049-5368
Rigid Connecting Link

170495368
WW429568: RNCC: 3 | RNVC: 2

6 Sep 1977

3040-17-103-5150
Rigid Connecting Link

171035150
FFVAOE-440551: RNCC: 3 | RNVC: 2

23 Aug 1989

3040-17-118-1543
Shouldered Shaft

171181543
S521F3296201: RNCC: 3 | RNVC: 2

14 Dec 2005

3040-17-101-1543
Body Hub

171011543
10071: RNCC: 3 | RNVC: 2

9 Dec 1986

3040-17-034-2299
Friction Lining

170342299
H5205-2-31: RNCC: 3 | RNVC: 2
H5205-2-31: RNCC: 5 | RNVC: 9

15 Apr 1969

3040-17-108-6273
Nonaircraft Mechanical Actuator

171086273
T-8221093-S/125MM/ITEM9: RNCC: 3 | RNVC: 2
T-8221093-S/125MM/ITEM9: RNCC: 5 | RNVC: 2

11 Jan 1995

3040-17-045-7797
Piston Ring

170457797
A304252-40624: RNCC: 3 | RNVC: 2

8 Nov 1979

3040-17-056-6444
Lever

170566444
F8485-347-001: RNCC: 3 | RNVC: 2

21 Nov 1995

3040-17-101-7931
Shouldered Shaft

171017931
53086: RNCC: 3 | RNVC: 2

25 Nov 1987

3040-17-111-3741
Linear Actuating Cylinder Assembly

171113741
ACDGK25DO-50/35-900-R+GK25DO: RNCC: 3 | RNVC: 2
HD12425-670/1 SLAG900MM: RNCC: 3 | RNVC: 2

15 Dec 1997

3040-17-113-7442
Linear Actuating Cylinder Assembly

171137442
DCD2017-76-93/1: RNCC: 3 | RNVC: 2

8 Jan 2001

3040-17-110-8171
Push-Pull Control Assembly

171108171
25270-1485: RNCC: 3 | RNVC: 2

1 Apr 1997

3040-17-045-7426
Shouldered Shaft

170457426
352281002531: RNCC: 3 | RNVC: 2

6 Apr 1981

3040-17-111-6929
Straight Axle

171116929
37521-107-45: RNCC: 3 | RNVC: 2

19 Mar 1998

3040-17-109-0230
Linear Actuating Cylinder Assembly

171090230
574-34: RNCC: 3 | RNVC: 2

21 Jun 1995

3040-17-054-7962
Shaft Collar

170547962
NO PRIMARY REF 17-054-7962: RNCC: 3 | RNVC: 2
0A-00378LEG56: RNCC: 5 | RNVC: 9

21 Nov 1983

3040-17-113-2486
Belt-Chain Tension Adjusting Device

171132486
TA1702: RNCC: 3 | RNVC: 2

13 Apr 2000

3040-17-114-6441
Hydraulic Accumulator

171146441
AM0,75P210CG0: RNCC: 3 | RNVC: 2
AM0,75P210CG0: RNCC: 5 | RNVC: 2

18 Feb 2002

3040-17-105-9957
Shouldered Shaft

171059957
X12580-025: RNCC: 3 | RNVC: 2
01021-80040: RNCC: 5 | RNVC: 2

12 Nov 1991

3040-17-039-6072
Straight Shaft

170396072
TF44141-7W11: RNCC: 3 | RNVC: 2

29 Jul 1972

3040-17-115-0396
Straight Shaft

171150396
393909854MR104(480-14): RNCC: 3 | RNVC: 2

16 Jul 2002

3040-17-114-7210
Shouldered Axle

171147210
262601401ZT102: RNCC: 3 | RNVC: 2

19 Mar 2002

3040-17-038-6348
Wormasstel

170386348
1E80-30HIS1B2006F101ET102: RNCC: 3 | RNVC: 2

26 Aug 1971

3040-17-116-1118
Rigid Connecting Link

171161118
686-100-0000: RNCC: 3 | RNVC: 2

19 Jul 2000

3040-17-045-5958
Shaft Worm

170455958
NO PRIMARY REF 17-045-5958: RNCC: 3 | RNVC: 2
9-10-3-1: RNCC: 6 | RNVC: 9

31 Mar 1981

3040-17-049-7546
Cilinder Voet

3040-17-103-6350
Shouldered Shaft

171036350
71130: RNCC: 3 | RNVC: 2

1 Jan 2000

3040-17-110-8535
Rigid Connecting Link

171108535
W003850081: RNCC: 3 | RNVC: 2

22 Apr 1997

3040-17-051-7106
Shouldered Shaft

170517106
A307912-1950080: RNCC: 3 | RNVC: 2

6 Feb 1981

3040-17-123-5943
Shaft

171235943
01-0962089: RNCC: 3 | RNVC: 2

28 Feb 2011

3040-17-112-5317
Shouldered Shaft

171125317
T002010145: RNCC: 3 | RNVC: 2

29 Mar 1999

3040-17-115-4958
Linear Actuating Cylinder

171154958
90091.322.00.00: RNCC: 3 | RNVC: 2

25 Feb 2003

3040-17-117-5897
Mechanical Drive Housing Part

171175897
VJ-1603: RNCC: 3 | RNVC: 2
VJ-1603: RNCC: 5 | RNVC: 2

13 Apr 2005

3040-17-102-3932
Shouldered Shaft

171023932
79.131.1-17POS1: RNCC: 3 | RNVC: 2

29 Jun 1988

3040-17-109-6322
Bell Crank

171096322
XX005-7574: RNCC: 3 | RNVC: 2

12 Dec 1995

3040-17-042-7289
Shouldered Shaft

170427289
A001826-05301LEG14: RNCC: 3 | RNVC: 2
A303594-19503: RNCC: 3 | RNVC: 2

6 May 1973

3040-17-044-3529
Shouldered Shaft

170443529
A406499-19507: RNCC: 3 | RNVC: 2

27 May 1974

3040-17-123-0733
Rigid Connecting Link

171230733
S322F1659101: RNCC: 3 | RNVC: 2

9 Jun 2010

3040-17-103-2923
Reparatieset Hogedr

171032923
NO PRIMARY REF 17-103-2923: RNCC: 3 | RNVC: 2
113672: RNCC: 5 | RNVC: 9

23 Jun 1989

3040-17-110-8708
Linear Actuating Cylinder Assembly

171108708
09-08-02-01: RNCC: 3 | RNVC: 2
09080201: RNCC: 5 | RNVC: 9

6 May 1997

3040-17-100-8174
Regelnaald

171008174
133.479B: RNCC: 3 | RNVC: 2
133.479B: RNCC: 5 | RNVC: 9
133.479B: RNCC: 5 | RNVC: 9

24 Jun 1986

3040-17-110-8836
Shouldered Shaft

171108836
2.85236.21: RNCC: 3 | RNVC: 2

13 May 1997

3040-17-120-9266
Hydraulic Accumulator

171209266
ELM2-350/90/AF: RNCC: 3 | RNVC: 2

27 Nov 2007

3040-17-101-2236
Shouldered Shaft

171012236
240057: RNCC: 3 | RNVC: 2

28 Jan 1987

3040-17-111-6995
Linear Actuating Cylinder Assembly Parts Kit

171116995
ACDK-80/40-760-SEALKIT: RNCC: 3 | RNVC: 2

23 Mar 1998

3040-17-054-0716
Shouldered Shaft

170540716
NO PRIMARY REF 17-054-0716: RNCC: 3 | RNVC: 2
TC-78-127-004CLEG4EN5: RNCC: 5 | RNVC: 9

27 Dec 1982

3040-17-104-7320
Shouldered Shaft

171047320
D1-02-08-0200: RNCC: 3 | RNVC: 2

16 Oct 1990

3040-17-102-4510
Mechanical Drive Housing

171024510
7175: RNCC: 3 | RNVC: 9
HWO-90 7IN-8IN-9IN: RNCC: 3 | RNVC: 9

28 Jul 1988

3040-17-114-0160
Ball Joint

171140160
03 3025-50-1ZR: RNCC: 3 | RNVC: 2
23453.0404: RNCC: 5 | RNVC: 2
7.GT.23453.404A: RNCC: 5 | RNVC: 2

2 May 2001

3040-17-113-0048
Mechanically Actuated Spindle

171130048
6505031: RNCC: 3 | RNVC: 2

10 Jan 2000

3040-17-053-5519
Zuigerstang Samenst

170535519
5093-12DE: RNCC: 3 | RNVC: 2
3-712-0029: RNCC: 5 | RNVC: 2
5093-12D POS9,15: RNCC: 5 | RNVC: 2

2 Oct 1984

3040-17-100-4997
Kogelkoppeling Met

171004997
0840.764BLAD1-ELSO-8563-GEBOORD: RNCC: 3 | RNVC: 2

5 Feb 1986

3040-17-110-8740
Schuifcilinder Cpl.

171108740
09-08-01-01: RNCC: 3 | RNVC: 2
09080101: RNCC: 5 | RNVC: 9

6 May 1997

3040-17-023-4286
Pawl

170234286
00.107.0414: RNCC: 3 | RNVC: 2
00-107-0414: RNCC: 6 | RNVC: 9
61006-4: RNCC: 6 | RNVC: 9

21 Feb 1973

3040-17-114-6639
Linear Actuating Cylinder Assembly

171146639
44994-01601: RNCC: 3 | RNVC: 2
410RF02136 ITEM 0191: RNCC: 5 | RNVC: 2
410RF02136/0191: RNCC: 5 | RNVC: 2

20 Feb 2002

3040-17-053-4326
Linear Actuating Cylinder Assembly

170534326
2737-521: RNCC: 3 | RNVC: 2
3-712-0018: RNCC: 5 | RNVC: 2
TK-BA35-2590-256: RNCC: 5 | RNVC: 2

12 Jan 1984

3040-17-115-1505
Friction Lining

171151505
M9010/1-338-435X4,76: RNCC: 3 | RNVC: 2

16 Sep 2002

3040-17-112-1776
Brake Disc

171121776
5017361-001: RNCC: 3 | RNVC: 2

29 Oct 1998

3040-17-106-4546
Rigid Connecting Link

171064546
T-8221070-S/16/17: RNCC: 3 | RNVC: 2
T.8221070.S/16/17: RNCC: 5 | RNVC: 2

3 Jun 1992

3040-17-111-7437
Rigid Connecting Link

171117437
KL-2013.A: RNCC: 3 | RNVC: 2

3 Apr 1998

3040-17-115-9240
Linear Actuating Cylinder Assembly

171159240
498-7268: RNCC: 3 | RNVC: 2

14 Aug 2003

3040-17-053-6037
Excenterflens

170536037
VRI23C9: RNCC: 3 | RNVC: 2
352231082220: RNCC: 5 | RNVC: 2

25 Feb 1985

3040-17-110-8709
Linear Actuating Cylinder Assembly

171108709
09-08-13-03: RNCC: 3 | RNVC: 2
09081303: RNCC: 5 | RNVC: 9

6 May 1997

3040-17-114-5601
Belt-Chain Tension Adjusting Device

171145601
02-007168: RNCC: 3 | RNVC: 2
02-007168: RNCC: 5 | RNVC: 9

23 Jan 2002

3040-17-052-1925
Shouldered Shaft

170521925
B211ADW: RNCC: 3 | RNVC: 1
046-11-9776058: RNCC: 3 | RNVC: 2
2.81222.21: RNCC: 3 | RNVC: 2
046.11.9776058: RNCC: 5 | RNVC: 2

1 Oct 1981

3040-17-114-9838
Shaft Collar

171149838
37810-220.001: RNCC: 3 | RNVC: 2
37810-22X36X14MM: RNCC: 5 | RNVC: 2

19 Jun 2002

3040-17-104-2029
Bell Crank

171042029
W01-1-22-04: RNCC: 3 | RNVC: 2

27 Mar 1990

3040-17-051-4445
Worm Shaft

170514445
C67802-111: RNCC: 3 | RNVC: 2

21 Jul 1980

3040-17-105-3421
Pneumatic Accumulator

171053421
087267-01130: RNCC: 3 | RNVC: 2
IHV10-250/17: RNCC: 3 | RNVC: 2

14 Mar 1991

3040-17-050-4945
Straight Shaft

170504945
658327: RNCC: 3 | RNVC: 2
7658327: RNCC: 5 | RNVC: 2

15 Dec 1978

3040-17-115-0719
Straight Shaft

171150719
442SK182810-12: RNCC: 3 | RNVC: 2

29 Jul 2002

3040-17-055-0766
Shouldered Shaft

170550766
53-4-580: RNCC: 3 | RNVC: 2

8 Mar 1984

3040-17-053-4391
Shouldered Shaft

170534391
3815-601: RNCC: 3 | RNVC: 2
5-242-0043: RNCC: 5 | RNVC: 2

12 Jan 1984

3040-17-115-9020
Linear Actuating Cylinder

171159020
537 15 73-02: RNCC: 3 | RNVC: 2

4 Aug 2003

3040-17-107-3315
Mechanically Actuated Spindle

171073315
MAR34-6122LEG21-DN125-200: RNCC: 3 | RNVC: 2

15 Jun 1993

3040-17-121-5239
Linear Actuating Cylinder Assembly

171215239
TS90-25X250: RNCC: 3 | RNVC: 2

19 Aug 2008

3040-17-111-6935
Straight Axle

171116935
37521-107-40: RNCC: 3 | RNVC: 2

19 Mar 1998

3040-17-031-2724
Push-Pull Control Assembly

170312724
4500-07-46-00: RNCC: 3 | RNVC: 2
85-657-6527: RNCC: 6 | RNVC: 9

5 Jul 1966

3040-17-049-6489
Restrictienippel

170496489
CF447281: RNCC: 3 | RNVC: 2
CF447281: RNCC: 5 | RNVC: 2

24 Nov 1977

3040-17-109-8857
Linear Actuating Cylinder Assembly

171098857
HCT25.H125.90.1280.KZ5A.11SPEC.: RNCC: 3 | RNVC: 2
HCT25.H125.90.1280.KZ5A.11SPEC.: RNCC: 5 | RNVC: 9

27 Feb 1996

3040-17-114-8026
Control Cam

171148026
352232630380: RNCC: 3 | RNVC: 2

22 Apr 2002

3040-17-112-3359
Linear Actuating Cylinder Assembly

171123359
ACDA-50/30-300-R/E: RNCC: 3 | RNVC: 2

14 Dec 1998

Load More Results