3040-14-463-3338

your web browser . 6150-14-551-4606Electrical Special Purpose Cable Assembly6150145514606 145514606 713789
3BWM3 Power Up Inc in Houston, TX United States https//www.nsnlookup.com /fsg-30/fsc-3040/fr 3040-14-463-3338
Straight Shaft 3040144633338 144633338 JavaScript in your web browser . 3040-14-463-3338Straight

CAGE 369Q1 Houston Growth Associates Ltd And in Houston, TX United States

CAGE 4X3Y4 Western Major Appliancesinc in Houston, TX United States

5310-99-560-8048 5310995608048 995608048 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5310-99-560-8049 5310995608049 995608049 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.