3040-14-337-5701

Shouldered Shaft

3040143375701 143375701 523022

A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT. View more Shouldered Shaft

Managed by France

NSN Created on 7 Oct 1976

Data Last Changed
July 2023

NATO Update Count
1

NATO Data Quality

3040-14-337-5701 SHAFT,SHOULDERED 3040143375701 143375701 1/1 — NSN 3040-14-337-5701 (Generic Image) 1/1

Marketplace 3040-14-337-5701

Need Help?
Request a Quotation from participating marketplace vendors

Updated Every Day

3040-14-337-5701 RQST NE

Updated Every Day

3040-14-337-5701 RQST

Updated Every Day

3040-14-337-5701 RQST NE

Related Documents 3040-14-337-5701 5+ Documents (More...)

https//www.nsnlookup.com
/fsg-53/fsc-5310/fr

5310-14-501-2559 Flat Washer 5310145012559 145012559,523-022

5310-14-501-2559 5310145012559 145012559 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

https//www.nsnlookup.com
/fsg-59/fsc-5975/us

5975-01-177-6951 Electrical Components Tie Down Strap,523022

your Account Upgrade 5975-01-177-6951Electrical Components Tie Down Strap5975011776951 011776951 523022
enable JavaScript in your web browser . 2915-14-263-6677Tuyauterie Circuit2915142636677 142636677 0176-523022
-6677 is a Tuyauterie Circuit Approved Sources 2915-14-263-6677 Part NumberManufacturerStatus0176-523022

https//www.nsnlookup.com
/fsg-29/fsc-2915/fr

2915-14-263-6677 Tuyauterie Circuit 2915142636677 142636677

enable JavaScript in your web browser . 2915-14-263-6677Tuyauterie Circuit2915142636677 142636677 0176-523022
-6677 is a Tuyauterie Circuit Approved Sources 2915-14-263-6677 Part NumberManufacturerStatus0176-523022

https//www.nsnlookup.com
/cage

Safran Aerosystems Ex Safran (CAGE Code F0422)

May 2000 4730-14-511-0364 Flange To Hose Elbow 2K20-090RNCC: 3 | RNVC: 2 | DAC: 2 27 Nov 1998 3040-14-337-5701

https//www.nsnlookup.com
/fsg-48/fsc-4820/fr

4820-14-321-9265 Plaque De Rincage 4820143219265 143219265

4820-14-321-9265 4820143219265 143219265 PLAQUE DE RINCAGE