3040-12-308-2207

Documents 6630-15-213-6388 2+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3040/de 3040-12-308-2207

to accomplish a specifically desired function. https//www.nsnlookup.com /fsg-30/fsc-3040/de 3040-12-308-2207
Belt-Chain Tension Adjusting Device 3040-12-308-2207 3040123082207 123082207 is a device designed

5310-01-213-6388 5310012136388 012136388 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5305-99-213-6388 5305992136388 992136388 is an externally threaded device whose threaded portion is of one nominal diameter with or without a head and having a cup, cone, or other type of machined point designed to prevent or restrict relative movement of parts and designed to be driven with either a wrench or inserted driver. a locking feature may be incorporated in the design of the head or threads.

5365-14-213-6388 5365142136388 142136388