What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Shouldered Shaft?

A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.

What is a Linear Actuating Cylinder Assembly?

A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Counterbalance Weight?

A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.

What is a Straight Axle?

A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Shouldered Axle?

A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.

What is a Control Cam?

A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).

What is a Mechanical Drive Housing?

A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).

What is a Manual Control Lever?

A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.

Miscellaneous Power Transmission Equipment - Belgium (BE)

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Federal Supply Group (FSG): 30 Mechanical Power Transmission Equipment

NATO Supply Classification Group (NSG): 30 Mechanical Power Transmission Equipment

Items Managed by Belgium (BE) - NCB is 13

Page 1 of 2

NSN Format for Miscellaneous Power Transmission Equipment
Codified by Belgium

30	40	13	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

FSC 3040 Miscellaneous Power Transmission Equipment - Belgium (BE)

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

Supply Items Included in Federal Supply Class 3040

What is a Shaft Collar? 13 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Shaft Retaining Plate? 13 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Rigid Connecting Link? 115 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Nonrotating Shaft Eye Bracket? 15 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 14 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Remote Control Lever? 25 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 43 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 32 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Shaft? 58 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Linear Actuating Cylinder Assembly? 18 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Counterbalance Weight? 12 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Straight Axle? 25 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 22 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Control Cam? 34 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is a Mechanical Drive Housing? 17 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Manual Control Lever? 23 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.

Stock Items From Supply Class 3040 Page 1 of 2

3040-13-113-6140
Linear Actuating Cylinder Assembly

50092258: RNCC: 3 | RNVC: 2 | DAC: 2

1 Aug 1989

3040-13-121-1279
Ball Joint

3040-13-118-7907
Planetary Gears Carrier

3040-13-119-1563
Spur Gearshaft

3040-13-116-9252
Ball Joint

3040-13-118-7908
Planetary Gears Carrier

3040-13-122-9746

3040-13-118-8984
Shouldered Shaft

3632021520: RNCC: 3 | RNVC: 2 | DAC: 2

3 Jun 2004

3040-13-120-5371
Shouldered Axle

3632451530: RNCC: 3 | RNVC: 2 | DAC: 4

13 Feb 2009

3040-13-118-8995
Shouldered Axle

3632321510: RNCC: 3 | RNVC: 2 | DAC: 2

3 Jun 2004

3040-13-120-5374
Shouldered Axle

3633411420: RNCC: 3 | RNVC: 2 | DAC: 4

16 Feb 2009

3040-13-118-9000
Shouldered Axle

3632451390: RNCC: 3 | RNVC: 2 | DAC: 2

3 Jun 2004

3040-13-120-5375
Straight Axle

3633421420: RNCC: 3 | RNVC: 2 | DAC: 4

16 Feb 2009

3040-13-116-6401
Control Cam

3529581018: RNCC: 3 | RNVC: 2 | DAC: 5

1 Sep 1997

3040-13-116-6358
Pawl

3529121015: RNCC: 3 | RNVC: 2 | DAC: 5

13 Aug 1997

3040-13-120-5377
Straight Axle

3633441420: RNCC: 3 | RNVC: 2 | DAC: 4

16 Feb 2009

3040-13-116-6379
Pawl

3529201017: RNCC: 3 | RNVC: 2 | DAC: 5

1 Sep 1997

3040-13-117-9485
Ball Joint

1619013300: RNCC: 3 | RNVC: 2 | DAC: 3

7 Sep 2000

3040-13-112-4511
Shouldered Shaft

2PC5932: RNCC: 3 | RNVC: 2 | DAC: 2

9 Oct 1984

3040-13-118-5510
Straight Axle

814917: RNCC: 2 | RNVC: 2 | DAC: 4

9 Dec 2002

3040-13-118-2713
Rigid Connecting Link

8266 030-107: RNCC: 3 | RNVC: 2 | DAC: 3

27 Jul 2001

3040-13-120-7508
Rigid Connecting Link

DGR23692: RNCC: 3 | RNVC: 2 | DAC: 6

27 Jan 2010

3040-13-120-5096
Linear Actuating Cylinder Assembly

0610430: RNCC: 3 | RNVC: 2 | DAC: 5

15 Jan 2009

3040-13-114-7424
Ball Joint Parts Kit

A13 SXNO3/2: RNCC: 3 | RNVC: 2 | DAC: 4

15 Mar 1994

3040-13-118-5947
Straight Axle

3636811857: RNCC: 3 | RNVC: 2 | DAC: 2

17 Feb 2003

3040-13-116-1489
Manual Control Lever

L-2691-037: RNCC: 3 | RNVC: 2 | DAC: 4

14 Aug 1996

3040-13-114-3307
Shouldered Shaft

FV721424: RNCC: 3 | RNVC: 2 | DAC: 2

9 Dec 1992

3040-13-114-0677
Straight Axle

788.041.104.013: RNCC: 3 | RNVC: 2 | DAC: 1

26 Nov 1991

3040-13-111-3699
Remote Control Lever

2-1002: RNCC: 5 | RNVC: 2 | DAC: 2

6 Aug 1980

3040-13-118-8580
Rigid Connecting Link

S521F3701103: RNCC: 5 | RNVC: 2 | DAC: 4

31 Mar 2004

3040-13-121-5783
Mechanically Actuated Spindle

PM02007/0482: RNCC: 3 | RNVC: 2 | DAC: 4

23 Apr 2013

3040-13-116-2972
Straight Shaft

785.134.210.013: RNCC: 3 | RNVC: 2 | DAC: 4

18 Dec 1996

3040-13-121-5892
Shouldered Shaft

4/00028/0624: RNCC: 3 | RNVC: 2 | DAC: 4

8 May 2013

3040-13-113-2511
Nonrotating Shaft Eye Bracket

99000276: RNCC: 3 | RNVC: 2 | DAC: 1

2 Mar 1988

3040-13-116-8288
Manual Control Lever Assembly

800-1164: RNCC: 3 | RNVC: 2 | DAC: 4

17 Mar 1998

3040-13-112-5763
Worm Shaft:

3040-13-119-7404
Rigid Connecting Link

TR20364A: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-010-0601

3040-13-103-2202
Shouldered Shaft

A10-57111110: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-109-4021
Ball Joint:

3040-13-113-6334
Shoe Type Brake

99006143-1: RNCC: 3 | RNVC: 2 | DAC: 1

26 Sep 1989

3040-13-121-2833
Shouldered Axle

PM02007/0637: RNCC: 3 | RNVC: 2 | DAC: 2

20 Dec 2011

3040-13-114-2089
Shouldered Axle

243-127: RNCC: 3 | RNVC: 2 | DAC: 1

19 Aug 1992

3040-13-120-5650
Remote Control Lever

6H4-44121-00: RNCC: 3 | RNVC: 2 | DAC: 3

26 Mar 2009

3040-13-116-5851
Control Cam

LU-14 10 00-E: RNCC: 3 | RNVC: 2 | DAC: 5

9 Jul 1997

3040-13-107-1462
Shaft Retaining Plate

2049-1012P1: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-117-1663
Remote Control Lever

620.013.1400.04: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-113-7622
Counterbalance Weight

243-I-106: RNCC: 3 | RNVC: 2 | DAC: 1

27 Mar 1990

3040-13-115-9288
Mechanical Drive Housing

90398600C: RNCC: 3 | RNVC: 9 | DAC: 6

10 Apr 1996

3040-13-119-0167
Shouldered Shaft

3484440010: RNCC: 3 | RNVC: 2 | DAC: 4

10 Dec 2004

3040-13-120-6117
Manual Control Lever Assembly

16571-ZE3-W00: RNCC: 3 | RNVC: 2 | DAC: 3

19 Jun 2009

3040-13-110-4125
Linear Actuating Cylinder

03-08-200-106-035: RNCC: 3 | RNVC: 2 | DAC: 3

22 Apr 1976

3040-13-120-5654
Shaft Retaining Plate

6H4-45321-00: RNCC: 3 | RNVC: 2 | DAC: 3

26 Mar 2009

3040-13-103-8740
Body Hub

SC13-2951-9-12: RNCC: 3 | RNVC: 2 | DAC: 1

1 Apr 1975

3040-13-118-6564

3040-13-106-6645
Rope Wire

1405-000-26L2550: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-110-3623
Shaft Collar

A10-58158060: RNCC: 3 | RNVC: 2 | DAC: 2

7 Apr 1976

3040-13-119-7411
Rigid Connecting Link

TR20372A: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-113-9256
Push-Pull Control Assembly

900-329-101: RNCC: 3 | RNVC: 2 | DAC: 1

5 Feb 1991

3040-13-112-9710
Flexible Shaft Assembly

MAUB3: RNCC: 3 | RNVC: 2 | DAC: 2

17 Feb 1987

3040-13-116-2993
Shouldered Shaft

785.134.221.015: RNCC: 3 | RNVC: 2 | DAC: 4

18 Dec 1996

3040-13-121-6356
Ball Joint

32.09.017: RNCC: 3 | RNVC: 2 | DAC: 6

11 Jul 2013

3040-13-121-5110
Flexible Shaft Assembly Casing

PPDI0015: RNCC: 3 | RNVC: 2 | DAC: 4

19 Dec 2012

3040-13-121-4814
Linear Actuating Cylinder Assembly

81.65706-6130: RNCC: 5 | RNVC: 2 | DAC: 4

13 Nov 2012

3040-13-118-3230
Counterbalance Weight

8266 483-003: RNCC: 3 | RNVC: 2 | DAC: 3

29 Oct 2001

3040-13-114-6967
Straight Axle

5049: RNCC: 3 | RNVC: 2 | DAC: 4

18 Jan 1994

3040-13-113-2801
Control Cam

50092098: RNCC: 3 | RNVC: 2 | DAC: 2

30 Mar 1988

3040-13-116-5113
Transmission Sleeve

382801-9: RNCC: 3 | RNVC: 2 | DAC: 4

29 Apr 1997

3040-13-116-4859
Straight Shaft

382506-4: RNCC: 3 | RNVC: 2 | DAC: 4

2 Apr 1997

3040-13-115-1907
Mechanically Actuated Spindle

422766-6: RNCC: 3 | RNVC: 2 | DAC: 2

14 Mar 1995

3040-13-117-2070
Straight Axle

620.062.1413.01: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-115-2057
Rotating Shaft Eye Bracket

3045421410: RNCC: 3 | RNVC: 2 | DAC: 4

14 Mar 1995

3040-13-116-6175
Pawl

3616520024: RNCC: 3 | RNVC: 2 | DAC: 5

6 Aug 1997

3040-13-121-3188
Rigid Connecting Link

M528G2830200000: RNCC: 3 | RNVC: 2 | DAC: 6

5 Mar 2012

3040-13-001-8253
Shouldered Shaft

KI93: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-113-1031
Linear Actuating Cylinder

CMT270/6/03-01: RNCC: 3 | RNVC: 2 | DAC: 2

29 Sep 1987

3040-13-111-6825
Pawl:

3040-13-121-4812
Linear Actuating Cylinder Assembly

81.65706-6129: RNCC: 5 | RNVC: 2 | DAC: 4

13 Nov 2012

3040-13-116-5117
Helical Gearshaft

267849-8: RNCC: 3 | RNVC: 2 | DAC: 4

29 Apr 1997

3040-13-113-6615
Pawl

99000834: RNCC: 3 | RNVC: 2 | DAC: 1

24 Oct 1989

3040-13-107-1541
Shaft

3040-13-115-2284
Rigid Connecting Link

4850827-9: RNCC: 3 | RNVC: 2 | DAC: 4

14 Mar 1995

3040-13-112-3273
Shouldered Shaft

1-28-02: RNCC: 3 | RNVC: 2 | DAC: 6

14 Feb 1984

3040-13-119-7415
Tension Spring Assembly

R22065REV.A: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-115-1190
Control Cable Assembly

920408: RNCC: 3 | RNVC: 2 | DAC: 2

17 Jan 1995

3040-13-109-3269
A Cylinder Assembly

3040-13-118-2121
Manual Contro Lever

3040-13-113-3561
Nonrotating Shaft Eye Bracket

99000113DET1: RNCC: 3 | RNVC: 2 | DAC: 1

27 Apr 1988

3040-13-118-4926
Rotating Shaft Eye Bracket

3621201280: RNCC: 3 | RNVC: 2 | DAC: 2

27 Sep 2002

3040-13-121-4533
Rigid Connecting Link

R21125: RNCC: 3 | RNVC: 2 | DAC: 1

3 Oct 2012

3040-13-116-3018
Shouldered Shaft

785.134.242.013: RNCC: 3 | RNVC: 2 | DAC: 4

18 Dec 1996

3040-13-113-1221
Shaft Retaining Plate

CMT270/6/01-04: RNCC: 3 | RNVC: 2 | DAC: 6

13 Oct 1987

3040-13-115-1016
Control Cam

3602020901: RNCC: 3 | RNVC: 2 | DAC: 5

20 Dec 1994

3040-13-010-0122
Straight: Shaft

3040-13-103-4988
Spur: Gearshaft

3040-13-103-7030
Control: Cam

3040-13-105-8543
Brake Drum:

3040-13-106-7327
Spur: Gearshaft

3040-13-107-1542
Straight: Shaft

3040-13-120-1829
Rigid Connecting Link

3631601316: RNCC: 5 | RNVC: 2 | DAC: 4

8 Jan 2008

3040-13-103-7654
Shouldered: Shaft

3040-13-113-2854
Sha Retaining Plate

3040-13-113-1631
Jack Cover

TS-40-03: RNCC: 3 | RNVC: 2 | DAC: 2

8 Dec 1987

3040-13-117-1675
Spherical Lever Pin

610.013.9004.10: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-110-2059
Shaft Secondary Ass

536051: RNCC: 3 | RNVC: 2 | DAC: 2

18 Nov 1975

3040-13-116-5686
Shouldered Shaft

Z94/917: RNCC: 3 | RNVC: 2 | DAC: 4

10 Jun 1997

3040-13-112-1229
Rigid Connecting Link

150211.017: RNCC: 3 | RNVC: 2 | DAC: 2

1 Mar 1983

3040-13-118-9693
Shouldered Axle

1134-5052-03: RNCC: 3 | RNVC: 2 | DAC: 2

18 Sep 2004

3040-13-112-7504
Body Hub

B213-250-1-45: RNCC: 3 | RNVC: 2 | DAC: 3

11 Feb 1986

3040-13-108-3214
Rigid Connecting Link

902148-0: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-118-9945
Nonrotating Shaft Eye Bracket

3631711860: RNCC: 3 | RNVC: 2 | DAC: 4

3 Dec 2004

3040-13-106-0726
Vorderachse

W5266: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-114-4555
Hub Clamp

G026,9-VERZ-E: RNCC: 3 | RNVC: 2 | DAC: 2

25 May 1993

3040-13-119-8795
Rigid Connecting Link

R20341F: RNCC: 3 | RNVC: 2 | DAC: 4

24 Jul 2007

3040-13-113-6333
Shoe Type Brake

99006143: RNCC: 3 | RNVC: 2 | DAC: 1

26 Sep 1989

3040-13-119-1795
Rigid Connecting Link

R24855: RNCC: 3 | RNVC: 2 | DAC: 3

10 Aug 2005

3040-13-113-9750
Remote Control Lever

3-380: RNCC: 3 | RNVC: 2 | DAC: 1

16 Apr 1991

3040-13-118-1783
Mechanical Drive Housing

M412103P: RNCC: 3 | RNVC: 2 | DAC: 6

13 Mar 2001

3040-13-113-1059
Right Brake Shaft

CMT270/6/82-09: RNCC: 3 | RNVC: 2 | DAC: 2

29 Sep 1987

3040-13-113-6339
Linear Actuating Cylinder Piston

FV840172/2: RNCC: 3 | RNVC: 2 | DAC: 1

26 Sep 1989

3040-13-116-7919
Lever

17222: RNCC: 3 | RNVC: 2 | DAC: 5

4 Feb 1998

3040-13-010-0125
Pawl:

3040-13-010-0209
Pawl:

3040-13-114-4010
Rigid Connecting Link

4209650100: RNCC: 3 | RNVC: 2 | DAC: 6

30 Mar 1993

3040-13-120-5407
Electrical-Fluid Pressure Connector Assembly

1721: RNCC: 5 | RNVC: 2 | DAC: 3

17 Feb 2009

3040-13-110-9351
Piston Ring

6840233: RNCC: 3 | RNVC: 2 | DAC: 2

27 Jun 1978

3040-13-103-8369
Manual Control Lever

546249: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-112-8483
Shouldered Shaft

646202: RNCC: 3 | RNVC: 2 | DAC: 6

17 Jun 1986

3040-13-113-2806
Mechanical Drive Housing

50092135: RNCC: 3 | RNVC: 2 | DAC: 2

30 Mar 1988

3040-13-117-3004
Friction Lining Material

L78-40/10-10A: RNCC: 3 | RNVC: 2 | DAC: 4

9 Jun 1999

3040-13-105-8544
Shouldered: Shaft

3040-13-120-5127
Straight Shaft

A26-H100B001Q-LEG2603: RNCC: 3 | RNVC: 2 | DAC: 6

20 Jan 2009

3040-13-116-5004
Control Cam

382066-9: RNCC: 3 | RNVC: 2 | DAC: 4

15 Apr 1997

3040-13-121-1399
Rigid Connecting Link

203055: RNCC: 3 | RNVC: 2 | DAC: 2

29 Mar 2011

3040-13-113-3608
Manual Control Lever

99006376: RNCC: 3 | RNVC: 2 | DAC: 1

11 May 1988

3040-13-115-0604
Hydraulic Accumulator Cylinder

4784785-0: RNCC: 3 | RNVC: 2 | DAC: 4

25 Oct 1994

3040-13-109-5341
Rigid Connecting Link

52299: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-108-8049
Manual Contro Lever

3040-13-114-1388
Manual Control Lever

3041402414: RNCC: 3 | RNVC: 2 | DAC: 1

29 Apr 1992

3040-13-118-2233
Rigid Connecting Link

811408Z: RNCC: 3 | RNVC: 2 | DAC: 3

1 Jun 2001

3040-13-116-7942
Lever

12802: RNCC: 3 | RNVC: 2 | DAC: 5

4 Feb 1998

3040-13-118-0678
Manual Control Lever

HH249: RNCC: 3 | RNVC: 2 | DAC: 3

15 Dec 2000

3040-13-118-7983
Multiple Gears Gearshaft

6.160.3020: RNCC: 3 | RNVC: 2 | DAC: 4

20 Jan 2004

3040-13-103-8830
Rigid Connecting Link

10203253: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-114-8817
Control Cam

789.302.203.013: RNCC: 3 | RNVC: 2 | DAC: 2

5 Jul 1994

3040-13-103-2311
Pawl

A10-58-471-01-0: RNCC: 5 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-116-6176
Pawl

3616420029: RNCC: 3 | RNVC: 2 | DAC: 5

6 Aug 1997

3040-13-115-2689
Remote Control Lever

1605348-0: RNCC: 3 | RNVC: 2 | DAC: 4

28 Mar 1995

3040-13-109-3880
Accumulator Cap

2X90311: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-102-8474
Brake Disc

21017163: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-103-8839
Pawl

3602002613: RNCC: 3 | RNVC: 2 | DAC: 5

1 Apr 1975

3040-13-121-2075
Shouldered Shaft

1524403: RNCC: 3 | RNVC: 2 | DAC: 6

24 Aug 2011

3040-13-114-9321
Straight: Shaft

3040-13-109-0348
Helical: Gearshaft

3040-13-113-4956
Counterbalan Weight

3040-13-111-2085
Shouldered: Shaft

3040-13-112-6321
Shouldered: Shaft

3040-13-112-5464
Straight Shaft

83450: RNCC: 3 | RNVC: 2 | DAC: 3

12 Mar 1985

3040-13-119-7398
Rigid Connecting Link

TR20361A: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-120-1965
Rotating Shaft Eye Bracket

39.90.300: RNCC: 3 | RNVC: 2 | DAC: 6

29 Jan 2008

3040-13-113-7385
Shouldered Shaft

5016S224: RNCC: 3 | RNVC: 2 | DAC: 2

27 Feb 1990

3040-13-116-7125
Shouldered Shaft

C7B120REP10: RNCC: 3 | RNVC: 2 | DAC: 4

6 Nov 1997

3040-13-113-8137
Remote Control Lever

99005700: RNCC: 3 | RNVC: 2 | DAC: 1

14 Aug 1990

3040-13-117-3127
Pawl

2252 8226 00: RNCC: 3 | RNVC: 2 | DAC: 3

3 Jul 1999

3040-13-115-2291
Ball Joint

1527234-7: RNCC: 3 | RNVC: 2 | DAC: 4

14 Mar 1995

3040-13-113-2480
Shaft Retaining Plate

99000107DET2: RNCC: 3 | RNVC: 2 | DAC: 1

2 Mar 1988

3040-13-113-7961
Nonrotating Shaft Eye Bracket

50008873: RNCC: 3 | RNVC: 2 | DAC: 2

3 Jul 1990

3040-13-113-2479
Shaft Retaining Plate

99000107DET1: RNCC: 3 | RNVC: 2 | DAC: 1

2 Mar 1988

3040-13-118-3229
Counterbalance Weight

8266 483-002: RNCC: 3 | RNVC: 2 | DAC: 3

29 Oct 2001

3040-13-120-5696
Rigid Connecting Link

6L2-43676-00: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 2009

3040-13-110-2492
Remote Control Lever

3511028: RNCC: 3 | RNVC: 2 | DAC: 3

27 Jan 1976

3040-13-112-7201
Rigid Connecting Link

22475: RNCC: 3 | RNVC: 2 | DAC: 4

17 Dec 1985

3040-13-111-3483
Shaft Retaining Plate

4GI036064: RNCC: 3 | RNVC: 2 | DAC: 2

25 Jun 1980

3040-13-119-7406
Rigid Connecting Link

TR20370A: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-110-3290
Rigid Connecting Link

A10-58158030: RNCC: 3 | RNVC: 2 | DAC: 2

10 Mar 1976

3040-13-113-6340
Linear Actuating Cylinder Piston

FV840172/1: RNCC: 3 | RNVC: 2 | DAC: 1

26 Sep 1989

3040-13-118-6263
Rigid Connecting Link

R21281F: RNCC: 3 | RNVC: 2 | DAC: 4

17 Mar 2003

3040-13-102-8290
Pawl

3602008457: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-118-8583
Rigid Connecting Link

S521F3701109: RNCC: 5 | RNVC: 2 | DAC: 4

31 Mar 2004

3040-13-010-0878
Pawl

3602002412: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-114-7588
Straight Shaft

314500133: RNCC: 3 | RNVC: 2 | DAC: 2

15 Mar 1994

3040-13-119-9837
Manual Control Lever

B0142070286: RNCC: 3 | RNVC: 2 | DAC: 4

28 Aug 2007

3040-13-114-0625
Shouldered Axle

788.041.102.015: RNCC: 3 | RNVC: 2 | DAC: 1

26 Nov 1991

3040-13-120-1030
Shouldered Shaft

3684200010: RNCC: 3 | RNVC: 2 | DAC: 4

2 Oct 2007

3040-13-112-4671
Shouldered Shaft

2PC5929: RNCC: 3 | RNVC: 2 | DAC: 2

9 Nov 1984

3040-13-113-5528
Shouldered Shaft

99006048: RNCC: 3 | RNVC: 2 | DAC: 1

14 Feb 1989

3040-13-103-8360
Rigid Connecting Link

547047: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-121-1395
Straight Axle

103625: RNCC: 3 | RNVC: 2 | DAC: 2

29 Mar 2011

3040-13-118-0758
A Cylinder Assembly

3040-13-118-0757
A Cylinder Assembly

3040-13-115-7294
Straight Shaft

789.510.000.012: RNCC: 3 | RNVC: 2 | DAC: 4

3 Jan 1996

3040-13-010-0762
Pawl

3602003355: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-112-1788
Straight Shaft

WW416510: RNCC: 3 | RNVC: 2 | DAC: 4

28 Nov 1996

3040-13-114-8582
Straight Shaft

789.302.203.025: RNCC: 3 | RNVC: 2 | DAC: 2

10 May 1994

3040-13-100-5199
Pawl

252901: RNCC: 3 | RNVC: 2 | DAC: 1

1 Apr 1975

3040-13-117-1579
Counterbalance Weight

620.006.1102.01: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-119-7405
Rigid Connecting Link

TR20375C: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-117-1644
Rigid Connecting Link

610.012.2304.11: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-114-1938
Rigid Connecting Link

1111571: RNCC: 3 | RNVC: 2 | DAC: 1

19 Aug 1992

3040-13-103-8613
Flexible Core End Fitting

549209: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-119-7413
Rigid Connecting Link

TR20367A: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-800-0681
Shaft Collar

142-401C: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-118-9970
Shaft Collar

3632461860: RNCC: 3 | RNVC: 2 | DAC: 4

3 Dec 2004

3040-13-010-0076
Straight: Shaft

3040-13-010-0106
Sha Retaining Plate

3040-13-103-7681
Straight: Shaft

3040-13-106-7336
Actuating Cylinder

3040-13-107-1776
Control: Cam

3040-13-109-6625
Straight: Shaft

3040-13-110-6150
Rig Connecting Link

3040-13-120-8936
Rigid Connecting Link

R20785G: RNCC: 3 | RNVC: 2 | DAC: 1

8 Jul 2010

3040-13-118-6457

3040-13-100-4842
Worm Shaft:

3040-13-103-9126
Shaft: Collar

3040-13-107-1784
Pawl:

3040-13-108-3499
Shouldered: Shaft

3040-13-109-0347
Helical: Gearshaft

3040-13-111-3143
Manual Contro Lever

3040-13-111-3545
Worm Shaft:

3040-13-113-2950
Sha Retaining Plate

3040-13-118-5509
Straight Axle

814911: RNCC: 2 | RNVC: 2 | DAC: 4

9 Dec 2002

3040-13-113-4476
Pawl

99000108: RNCC: 3 | RNVC: 2 | DAC: 1

6 Jul 1988

3040-13-121-2330
Shouldered Shaft

103812: RNCC: 3 | RNVC: 2 | DAC: 6

22 Sep 2011

3040-13-010-0078
Shouldered: Shaft

3040-13-010-0193
Pawl:

3040-13-103-7683
Straight: Shaft

3040-13-010-0126
Pawl:

3040-13-106-7325
Spur: Gearshaft

3040-13-121-2331
Shouldered Shaft

104196: RNCC: 3 | RNVC: 2 | DAC: 6

22 Sep 2011

3040-13-118-2511
Sha Retaining Plate

3040-13-110-9350
Piston Ring

16121867: RNCC: 3 | RNVC: 2 | DAC: 2

27 Jun 1978

3040-13-120-2984
Shouldered Axle

7096436: RNCC: 5 | RNVC: 2 | DAC: 9

12 Mar 2008

3040-13-001-2782
Brake Band And Lining

KI63: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-117-1645
Lever Fitting

610.012.9014.11: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-010-0877
Pawl

3602002386: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-121-1779
Shouldered Shaft

1524321: RNCC: 3 | RNVC: 2 | DAC: 6

14 Jun 2011

3040-13-010-0207
Pawl:

3040-13-121-5452
Shouldered Shaft

55.02.001V: RNCC: 3 | RNVC: 2 | DAC: 6

25 Mar 2013

3040-13-113-8206
Manual Control Lever

121-167-0001: RNCC: 3 | RNVC: 2 | DAC: 1

14 Aug 1990

3040-13-104-2108
Pawl:

3040-13-118-0755
A Cylinder Assembly

3040-13-118-1759
Shouldered Shaft

M412223: RNCC: 3 | RNVC: 2 | DAC: 6

13 Mar 2001

3040-13-117-8796
Mechanical Housing

3040-13-118-0730
Remote Control Lever

HSV162: RNCC: 3 | RNVC: 2 | DAC: 3

15 Dec 2000

3040-13-120-5880
Pawl

3523670010: RNCC: 3 | RNVC: 2 | DAC: 4

30 Apr 2009

3040-13-114-6390
Push-Pull Control Assembly

2900081400: RNCC: 3 | RNVC: 2 | DAC: 6

7 Dec 1993

3040-13-120-6207
Rigid Connecting Link

R20786D: RNCC: 3 | RNVC: 2 | DAC: 2

7 Jul 2009

3040-13-109-1887
A Cylinder Assembly

3040-13-113-1058
Left Brake Shaft

CMT270/6/82-08: RNCC: 3 | RNVC: 2 | DAC: 2

29 Sep 1987

3040-13-121-0969
Rigid Connecting Link

R29064.00: RNCC: 3 | RNVC: 2 | DAC: 1

22 Feb 2011

3040-13-112-2700
Shouldered Shaft

31/3219: RNCC: 3 | RNVC: 2 | DAC: 6

6 Dec 1983

3040-13-113-8379
Shouldered Shaft

99006337: RNCC: 3 | RNVC: 2 | DAC: 1

14 Aug 1990

3040-13-103-4300
Worm Shaft

30670: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-103-2247
Pawl

A10-58-252-08-0: RNCC: 5 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-119-1929
Straight Shaft

610.011.7202.10: RNCC: 3 | RNVC: 2 | DAC: 4

28 Sep 2005

3040-13-119-7399
Rigid Connecting Link

TR20373C: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-114-4553
Link

3064060016: RNCC: 3 | RNVC: 2 | DAC: 2

12 Jul 1999

3040-13-111-2086
Shouldered: Shaft

3040-13-119-6947
Flexible Shaft Assembly Casing

J34567504: RNCC: 3 | RNVC: 2 | DAC: 4

18 Dec 2006

3040-13-121-1241
Mechanical Drive Housing

BAD031: RNCC: 3 | RNVC: 2 | DAC: 6

10 Mar 2011

3040-13-115-3159
Ball Joint:

3040-13-116-6542
Pawl:

3040-13-118-4690
Rig Connecting Link

3040-13-115-2703
Piston Ring

4833026: RNCC: 3 | RNVC: 2 | DAC: 4

28 Mar 1995

3040-13-100-4143
Pawl

B2046B2: RNCC: 3 | RNVC: 2 | DAC: 2

31 Mar 1977

3040-13-113-5645
Rigid Connecting Link

99000111: RNCC: 3 | RNVC: 2 | DAC: 1

11 Apr 1989

3040-13-114-5248
Rotary Joint Assemb

50040473: RNCC: 3 | RNVC: 2 | DAC: 2

3 Aug 1993

3040-13-108-7866
Spur: Gearshaft

3040-13-108-3167
Brake: Disc

3040-13-108-7881
Spur: Gearshaft

3040-13-109-8966
Ball Joint:

3040-13-114-1309
Shouldered: Axle

3040-13-111-3144
Manual Contro Lever

3040-13-121-3569
Shouldered Axle

3624951850: RNCC: 3 | RNVC: 2 | DAC: 1

25 Apr 2012

3040-13-121-2796
Rigid Connecting Link

TP534041: RNCC: 3 | RNVC: 2 | DAC: 6

16 Dec 2011

3040-13-103-3143
Helical Gearshaft

845-4162-01: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-112-8445
Manual Control Lever

2PC5926: RNCC: 3 | RNVC: 2 | DAC: 6

17 Jun 1986

3040-13-114-8581
Control Cam

789.302.313: RNCC: 3 | RNVC: 2 | DAC: 2

10 May 1994

3040-13-121-2802
Rigid Connecting Link

TP532010: RNCC: 3 | RNVC: 2 | DAC: 6

16 Dec 2011

3040-13-116-2976
Shouldered Shaft

785.134.317.011: RNCC: 3 | RNVC: 2 | DAC: 4

18 Dec 1996

3040-13-113-2784
Rod Assembly Fixed

S3004: RNCC: 3 | RNVC: 2 | DAC: 2

16 Mar 1988

3040-13-113-2780
Rod Assembly

S3005: RNCC: 3 | RNVC: 2 | DAC: 2

16 Mar 1988

3040-13-108-7865
Shouldered: Shaft

3040-13-010-0055
Pawl:

3040-13-108-7882
Shaft: Collar

3040-13-111-2880
Flexible Con Casing

3040-13-108-3594
Shaft: Collar

3040-13-108-7868
Control: Cam

3040-13-109-9244
Manual Contro Lever

3040-13-120-5648
Nonaircraft Mechanical Actuator

6L2-41217-00: RNCC: 3 | RNVC: 2 | DAC: 3

26 Mar 2009

3040-13-119-3806
Brake Disc

PIBA.MB.F218-ITEM 14: RNCC: 3 | RNVC: 2 | DAC: 4

15 May 2006

3040-13-109-9289
Remote Control Lever

C20170A82B82: RNCC: 3 | RNVC: 2 | DAC: 4

1 Apr 1975

3040-13-103-8817
Straight Shaft

546981: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-118-4308
Straight Axle

AXE15-22 MM: RNCC: 3 | RNVC: 2 | DAC: 2

25 Jun 2002

3040-13-001-0307
Flexible Shaft Assembly

CCD113: RNCC: 3 | RNVC: 2 | DAC: 6

11 Dec 1975

3040-13-121-1168
Remote Control Lever

PM02017/0047: RNCC: 3 | RNVC: 2 | DAC: 2

28 Feb 2011

3040-13-112-3410
Bell Crank

81327300007: RNCC: 3 | RNVC: 2 | DAC: 3

28 Feb 1984

3040-13-117-2185
Control Cam

620.073.9010.01: RNCC: 3 | RNVC: 2 | DAC: 4

6 Mar 1999

3040-13-115-1687
Flexible Drive Shaft

421028-0100: RNCC: 3 | RNVC: 2 | DAC: 6

1 Feb 1995

3040-13-112-1332
Piston Ring

M1904T: RNCC: 3 | RNVC: 2 | DAC: 2

29 Mar 1983

3040-13-108-6020
Straight Shaft

RW6T39: RNCC: 3 | RNVC: 2 | DAC: 1

1 Apr 1975

3040-13-121-1855
Shouldered Axle

0240640: RNCC: 3 | RNVC: 2 | DAC: 2

28 Jun 2011

3040-13-115-6462
Rigid Connecting Link

1567819: RNCC: 3 | RNVC: 2 | DAC: 4

24 Oct 1995

3040-13-119-7408
Rigid Connecting Link

TR20378C: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-112-5809
Rigid Connecting Link

4RM451564H01: RNCC: 3 | RNVC: 2 | DAC: 2

18 Jun 1985

3040-13-110-9352
Piston Ring

6840246: RNCC: 3 | RNVC: 2 | DAC: 2

27 Jun 1978

3040-13-116-5172
Straight Shaft

S17/40: RNCC: 3 | RNVC: 2 | DAC: 4

29 Apr 1997

3040-13-112-3402
Nonrotating Shaft Eye Bracket

81442010076: RNCC: 3 | RNVC: 2 | DAC: 3

28 Feb 1984

3040-13-110-2327
Detent Plate

4063020028: RNCC: 3 | RNVC: 2 | DAC: 3

30 Dec 1975

3040-13-100-4105
Pawl

B2201: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-114-6966
Straight Axle

4351219: RNCC: 3 | RNVC: 2 | DAC: 4

18 Jan 1994

3040-13-118-3228
Counterbalance Weight

8266 483-001A: RNCC: 3 | RNVC: 2 | DAC: 3

29 Oct 2001

3040-13-118-8621
Cylinder Assembly

9K1591: RNCC: 3 | RNVC: 2 | DAC: 6

6 Apr 2004

3040-13-117-0662
Linear A Piston Rod

3040-13-121-1135
Shouldered Axle

PM02017/0398: RNCC: 3 | RNVC: 2 | DAC: 2

28 Feb 2011

3040-13-104-0344
Rigid Connecting Link

548651: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-110-3291
Rigid Connecting Link

A10-58158040: RNCC: 3 | RNVC: 2 | DAC: 2

10 Mar 1976

3040-13-110-3883
Manual Control Lever

22896-02U01: RNCC: 3 | RNVC: 2 | DAC: 3

15 Jun 1976

3040-13-118-4691
Shouldered Axle

372587: RNCC: 3 | RNVC: 2 | DAC: 5

19 Aug 2002

3040-13-103-3142
Helical Gearshaft

845-4161-01: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-118-9934
Rigid Connecting Link

3631581860: RNCC: 3 | RNVC: 2 | DAC: 4

3 Dec 2004

3040-13-118-4533
Rigid Connecting Link

1372510: RNCC: 3 | RNVC: 2 | DAC: 6

17 Jul 2002

3040-13-117-1658
Extension Shaft

620.013.1100.02: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-112-3913
Shaft Retaining Plate

1117691: RNCC: 3 | RNVC: 2 | DAC: 1

23 May 1984

3040-13-113-6449
Rigid Connecting Link

3171701: RNCC: 3 | RNVC: 2 | DAC: 6

11 Oct 1989

3040-13-114-8428
Shouldered Shaft

785.134.233.012: RNCC: 3 | RNVC: 2 | DAC: 4

26 Apr 1994

3040-13-118-2128
Remote Contro Lever

3040-13-108-9581
Linear Actuating Cylinder

HS12U2-9-46: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-100-5184
Pawl

252780: RNCC: 3 | RNVC: 2 | DAC: 1

1 Apr 1975

3040-13-113-4483
Rigid Connecting Link

99001514: RNCC: 3 | RNVC: 2 | DAC: 1

6 Jul 1988

3040-13-102-8342

3040-13-109-7529
Nonrotating Shaft Eye Bracket

4215510738: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-114-1794
Shaft Collar

99005795: RNCC: 3 | RNVC: 2 | DAC: 1

24 Jun 1992

3040-13-010-0043
Control: Cam

3040-13-010-0138
Sha Retaining Plate

3040-13-010-0096
Manual Contro Lever

3040-13-103-4987
Spur: Gearshaft

3040-13-107-1775
Control: Cam

3040-13-111-2090
Shouldered: Shaft

3040-13-107-1780
Remote Contro Lever

3040-13-115-9084
Push-Pull Control Assembly

03-03-06-0012-2: RNCC: 3 | RNVC: 2 | DAC: 4

27 Mar 1996

3040-13-113-4189
Rigid Connecting Link

99005803: RNCC: 3 | RNVC: 2 | DAC: 1

22 Jun 1988

3040-13-119-2428
Shaft Retaining Plate

310455: RNCC: 3 | RNVC: 2 | DAC: 4

22 Dec 2005

3040-13-114-5462
Piston Ring

M-1904-FD: RNCC: 3 | RNVC: 2 | DAC: 4

17 Aug 1993

3040-13-117-6427
Straight Shaft

1568269-3: RNCC: 3 | RNVC: 2 | DAC: 2

1 Mar 2000

3040-13-113-6338
Linear Actuating Cylinder Piston

FV840172/3: RNCC: 3 | RNVC: 2 | DAC: 1

26 Sep 1989

3040-13-121-1425
Shouldered Shaft

PM02007/0420: RNCC: 3 | RNVC: 2 | DAC: 2

29 Mar 2011

3040-13-112-7562
Manual Control Lever

B213-250-1-7: RNCC: 3 | RNVC: 2 | DAC: 3

11 Feb 1986

3040-13-116-8462
A Cylinder Assembly

3040-13-118-2055
A Cylinder Assembly

3040-13-103-0134
Pawl

3602002466: RNCC: 3 | RNVC: 2 | DAC: 5

1 Apr 1975

3040-13-108-9694
Friction Lining

R6553-16: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-115-7355
Linear Actuating Cylinder Assembly

4833270-4: RNCC: 3 | RNVC: 2 | DAC: 4

16 Jan 1996

3040-13-118-8338
Straight Shaft Assembly

AGR -P 9411325: RNCC: 3 | RNVC: 2 | DAC: 4

10 Mar 2004

3040-13-113-7134
Control Cam

353043: RNCC: 3 | RNVC: 2 | DAC: 4

16 Jan 1990

3040-13-120-6108
Remote Control Lever

16551-ZE3-000: RNCC: 3 | RNVC: 2 | DAC: 3

19 Jun 2009

3040-13-117-8179
Sha Retaining Plate

3040-13-116-6135
Pawl:

3040-13-118-3443
Shouldered: Shaft

3040-13-117-9973
Shouldered: Shaft

3040-13-118-4643
Cylinder: Support

3040-13-010-0079
Shouldered Shaft

5525412: RNCC: 5 | RNVC: 9 | DAC: 9

31 Mar 1977

3040-13-110-3556
Rigid Connecting Link

784-026-45: RNCC: 3 | RNVC: 2 | DAC: 2

24 Mar 1976

3040-13-117-0982
Shouldered Shaft

5155774: RNCC: 3 | RNVC: 2 | DAC: 4

2 Feb 1999

3040-13-121-4516
Rotating Shaft Eye Bracket

01.00.036: RNCC: 5 | RNVC: 2 | DAC: 6

26 Sep 2012

3040-13-116-9263
Ball Joint

2002-221: RNCC: 3 | RNVC: 2 | DAC: 2

19 Jun 1998

3040-13-118-4932
Shouldered Axle

3621701280: RNCC: 3 | RNVC: 2 | DAC: 2

27 Sep 2002

3040-13-110-2866
Pawl

B7331: RNCC: 3 | RNVC: 2 | DAC: 2

24 Feb 1976

3040-13-121-2801
Rigid Connecting Link

TP532008: RNCC: 3 | RNVC: 2 | DAC: 6

16 Dec 2011

3040-13-114-7493
Bevel Gear And Shaft Assembly

99006614: RNCC: 3 | RNVC: 2 | DAC: 2

15 Mar 1994

3040-13-115-2235
Remote Control Lever

1607827-1: RNCC: 3 | RNVC: 2 | DAC: 4

14 Mar 1995

3040-13-118-9694
Shouldered Axle

1134-5052-04: RNCC: 3 | RNVC: 2 | DAC: 2

18 Sep 2004

3040-13-112-8392
Piston Housing

645214: RNCC: 3 | RNVC: 2 | DAC: 6

17 Jun 1986

3040-13-117-1672
Manual Control Lever

620.013.9006.02: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-114-2092
Control Cam

531L/19/6: RNCC: 3 | RNVC: 2 | DAC: 1

19 Aug 1992

3040-13-116-1443
Friction Lining

700.30.146.06.04: RNCC: 3 | RNVC: 2 | DAC: 4

14 Aug 1996

3040-13-117-2524
Body Hub

620.016.9002.04: RNCC: 3 | RNVC: 2 | DAC: 4

6 Mar 1999

3040-13-114-8430
Shouldered Shaft

785.134.234.012: RNCC: 3 | RNVC: 2 | DAC: 4

26 Apr 1994

3040-13-114-1710
Bell Crank

99000182: RNCC: 3 | RNVC: 2 | DAC: 1

24 Jun 1992

3040-13-113-5610
Nonrotating Shaft Eye Bracket

50010634: RNCC: 3 | RNVC: 2 | DAC: 2

15 Mar 1989

3040-13-114-8124
Rigid Connecting Link

T22003-03: RNCC: 3 | RNVC: 2 | DAC: 2

29 Mar 1994

3040-13-119-7409
Rigid Connecting Link

TR20391A: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-113-9434
Shaft Collar

124-154: RNCC: 3 | RNVC: 2 | DAC: 1

5 Mar 1991

3040-13-112-7153
Straight Shaft

CMT270/6/82-14: RNCC: 3 | RNVC: 2 | DAC: 2

3 Dec 1985

3040-13-115-6443
Rigid Connecting Link

1584143-0: RNCC: 3 | RNVC: 2 | DAC: 4

24 Oct 1995

3040-13-113-2813
Linear Actuating Cylinder Assembly

50092134: RNCC: 3 | RNVC: 2 | DAC: 2

30 Mar 1988

3040-13-120-9409
Control Cam

PM02007/0257: RNCC: 3 | RNVC: 2 | DAC: 2

3 Sep 2010

3040-13-116-2744
Body Hub

267777-1: RNCC: 3 | RNVC: 2 | DAC: 4

4 Dec 1996

3040-13-113-0504
Straight Shaft

CMT270/6/82-05: RNCC: 3 | RNVC: 2 | DAC: 2

22 Jul 1987

3040-13-112-4512
Shouldered Shaft

2PC5934: RNCC: 3 | RNVC: 2 | DAC: 2

9 Oct 1984

3040-13-116-9797
Shoe Type: Brake

3040-13-112-7747
Spur Gearshaft

PX67: RNCC: 3 | RNVC: 2 | DAC: 2

25 Mar 1986

3040-13-113-4792
Breather

1120393: RNCC: 3 | RNVC: 2 | DAC: 1

14 Sep 1988

3040-13-102-8346

3040-13-117-9593
Rigid Connecting Link

1586263-4: RNCC: 3 | RNVC: 2 | DAC: 3

8 Sep 2000

3040-13-110-3628
Rigid Connecting Link

A10-58458030: RNCC: 3 | RNVC: 2 | DAC: 2

7 Apr 1976

3040-13-117-8405
Control Cable Assembly

14542: RNCC: 3 | RNVC: 2 | DAC: 3

23 Jun 2000

3040-13-109-7729
Rigid Connecting Link

75380: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-114-3348
Straight: Shaft

3040-13-114-3097
Shouldered Shaft

FV721422: RNCC: 3 | RNVC: 2 | DAC: 2

25 Nov 1992

3040-13-118-5731
Straight Axle

M0125-39-0104-00: RNCC: 3 | RNVC: 2 | DAC: 2

20 Jan 2003

3040-13-119-7396
Rigid Connecting Link

TR20358A: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-116-2998
Straight Shaft

785.134.225.012: RNCC: 3 | RNVC: 2 | DAC: 4

18 Dec 1996

3040-13-115-2567
Rigid Connecting Link

1500408-8: RNCC: 3 | RNVC: 2 | DAC: 4

28 Mar 1995

3040-13-120-0437
Pawl

050163: RNCC: 3 | RNVC: 2 | DAC: 3

17 Sep 2007

3040-13-110-2060
Shaft Secondary

536052: RNCC: 3 | RNVC: 2 | DAC: 2

18 Nov 1975

3040-13-111-9629
Nonrotating Shaft Eye Bracket

1114385: RNCC: 3 | RNVC: 2 | DAC: 1

8 Jun 1982

3040-13-010-0063
Straight: Shaft

3040-13-103-9130
Straight: Shaft

3040-13-107-1782
Remote Contro Lever

3040-13-119-1088
Shouldered Shaft

630.016.1202.01: RNCC: 3 | RNVC: 2 | DAC: 4

22 Apr 2005

3040-13-118-8478
Straight Axle

6.052.551: RNCC: 3 | RNVC: 2 | DAC: 4

25 Mar 2004

3040-13-120-5088
Linear Actuating Cylinder Assembly

0406748: RNCC: 3 | RNVC: 2 | DAC: 2

14 Jan 2009

3040-13-119-7418
Rigid Connecting Link

TR20366A: RNCC: 3 | RNVC: 2 | DAC: 4

2 Feb 2007

3040-13-112-3666
Control Cam

243500.002: RNCC: 3 | RNVC: 2 | DAC: 1

28 Mar 1984

3040-13-121-6358
Shouldered Axle

07.00.138: RNCC: 3 | RNVC: 2 | DAC: 6

11 Jul 2013

3040-13-109-3836
Straight Shaft

17-2-5066-51: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-114-8451
Worm Shaft

785.134.705: RNCC: 3 | RNVC: 2 | DAC: 4

26 Apr 1994

3040-13-121-2329
Shouldered Shaft

103811: RNCC: 3 | RNVC: 2 | DAC: 6

22 Sep 2011

3040-13-100-4111
Pawl

B2206: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-118-1753
Rigid Connecting Link

R21282 E: RNCC: 3 | RNVC: 2 | DAC: 4

13 Mar 2001

3040-13-107-7216
Flexible Control Casing

539057: RNCC: 3 | RNVC: 2 | DAC: 2

31 Mar 1977

3040-13-121-0970
Rigid Connecting Link

R29065.00: RNCC: 3 | RNVC: 2 | DAC: 1

22 Feb 2011

3040-13-116-2991
Shouldered Shaft

785.134.221.016: RNCC: 3 | RNVC: 2 | DAC: 4

18 Dec 1996

3040-13-104-8665
Manual Control Lever

50091B: RNCC: 3 | RNVC: 2 | DAC: 3

31 Mar 1977

3040-13-115-0422
Pawl Latch

3040-13-010-0042
Control: Cam

3040-13-114-2520
Flexible Control Casing

1866/3.10I: RNCC: 3 | RNVC: 2 | DAC: 1

14 Oct 1992

3040-13-118-6544

3040-13-120-8565
Pawl

B0142040344: RNCC: 3 | RNVC: 2 | DAC: 4

5 May 2010

3040-13-113-1520
Rigid Connecting Link

R11565A: RNCC: 3 | RNVC: 2 | DAC: 2

24 Nov 1987

3040-13-113-6622
Remote Control Lever

99000827: RNCC: 3 | RNVC: 2 | DAC: 1

24 Oct 1989

3040-13-118-9944
Nonrotating Shaft Eye Bracket

3631701860: RNCC: 3 | RNVC: 2 | DAC: 4

3 Dec 2004

3040-13-117-1660
Extension Shaft

620.013.1101.02: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-118-7441
Straight Axle

3617020010: RNCC: 3 | RNVC: 2 | DAC: 2

27 Aug 2003

3040-13-103-9027
Flexible Casing End Fitting

549021: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-116-5005
Control Cam

1655289-5: RNCC: 3 | RNVC: 2 | DAC: 4

15 Apr 1997

3040-13-114-3332
Shaft: Collar

3040-13-118-8329
Straight Shaft Assembly

PA-S 9411194: RNCC: 3 | RNVC: 2 | DAC: 4

10 Mar 2004

3040-13-113-4190
Rigid Connecting Link

99005799: RNCC: 3 | RNVC: 2 | DAC: 1

22 Jun 1988

3040-13-109-8986
Shaft Retaining Plate

47639: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-117-4673
Control Pedal

Z-98-S61: RNCC: 3 | RNVC: 2 | DAC: 3

23 Nov 1999

3040-13-113-7711
Mechanical Drive Housing

99006613: RNCC: 3 | RNVC: 2 | DAC: 1

24 Apr 1990

3040-13-112-5149
Shouldered Shaft

3PC13313: RNCC: 3 | RNVC: 2 | DAC: 2

18 Dec 1984

3040-13-117-7169
Brake Band And Lining

23953LEG82: RNCC: 3 | RNVC: 2 | DAC: 4

12 Apr 2000

3040-13-116-1442
Brake Shoe

700.30.406.06.02: RNCC: 3 | RNVC: 2 | DAC: 4

14 Aug 1996

3040-13-117-1646
Lever Fitting

610.012.9023.11: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-120-6249
Remote Control Lever

3645641120: RNCC: 3 | RNVC: 2 | DAC: 4

14 Jul 2009

3040-13-117-1641
Lever Fitting

620.012.9005.01: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-121-6133
Spur Gearshaft

100265 F31: RNCC: 3 | RNVC: 2 | DAC: 3

13 Jun 2013

3040-13-119-7414
Tension Spring Assembly

R22065: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-119-7400
Rigid Connecting Link

TR20374C: RNCC: 3 | RNVC: 2 | DAC: 4

1 Feb 2007

3040-13-117-2485
Mechanically Actuated Spindle

620.014.1204.01: RNCC: 3 | RNVC: 2 | DAC: 4

6 Mar 1999

3040-13-103-8886
Flexible Control Casing

549057: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-114-1317
Straight Axle

531L/18/9: RNCC: 3 | RNVC: 2 | DAC: 1

1 Apr 1992

3040-13-121-1777
Shouldered Shaft

1524318: RNCC: 3 | RNVC: 2 | DAC: 6

14 Jun 2011

3040-13-112-7492
Straight Shaft

B213-250-1-111: RNCC: 3 | RNVC: 2 | DAC: 3

11 Feb 1986

3040-13-117-2838
Piston Ring

3662009461: RNCC: 3 | RNVC: 2 | DAC: 5

8 Mar 1999

3040-13-118-3235
Counterbalance Weight

8266-483-021: RNCC: 3 | RNVC: 2 | DAC: 3

29 Oct 2001

3040-13-103-8472
Rigid Connecting Link

546226: RNCC: 3 | RNVC: 2 | DAC: 2

1 Apr 1975

3040-13-113-5216
Control Cam

99005228: RNCC: 3 | RNVC: 2 | DAC: 1

7 Dec 1988

3040-13-118-8584
Rigid Connecting Link

R26010: RNCC: 3 | RNVC: 2 | DAC: 4

31 Mar 2004

3040-13-115-2248
Mechanical Drive Housing Part

266104: RNCC: 3 | RNVC: 2 | DAC: 4

14 Mar 1995

3040-13-109-3363
Flexible Drive Shaft

33554124: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-103-8614
Flexible Core End Fitting

549157: RNCC: 3 | RNVC: 2 | DAC: 6

1 Apr 1975

3040-13-117-1674
Lock Collar

620.013.9008.02: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

3040-13-116-3524
Shoe Brake Parts Kit

272904-4: RNCC: 3 | RNVC: 2 | DAC: 4

22 Jan 1997

3040-13-103-8887
Pawl

536135: RNCC: 3 | RNVC: 2 | DAC: 2

31 Mar 1977

3040-13-118-8581
Rigid Connecting Link

R26007: RNCC: 3 | RNVC: 2 | DAC: 4

31 Mar 2004

3040-13-120-4944
Linear Actuating Cylinder Assembly

0606984: RNCC: 3 | RNVC: 2 | DAC: 2

15 Dec 2008

3040-13-108-9659
Friction Lining

R6554-44: RNCC: 3 | RNVC: 2 | DAC: 3

1 Apr 1975

3040-13-113-8363
Shouldered Axle

246-106-2: RNCC: 3 | RNVC: 2 | DAC: 1

14 Aug 1990

3040-13-115-0598
Pawl Latch

3040-13-010-0108
Straight: Shaft

3040-13-103-9131
Straight: Shaft

3040-13-108-3498
Shouldered: Shaft

3040-13-115-0302
Mechanical Housing

3040-13-115-4592
Mechanically Actuated Spindle

789.302.203.012: RNCC: 3 | RNVC: 2 | DAC: 2

4 Jul 1995

3040-13-121-5425
Rigid Connecting Link

R24498: RNCC: 3 | RNVC: 2 | DAC: 6

18 Mar 2013

3040-13-108-6002
Straight Shaft

RW6T54A: RNCC: 3 | RNVC: 2 | DAC: 1

1 Apr 1975

3040-13-115-7356
Linear Actuating Cylinder Assembly

4833271-2: RNCC: 3 | RNVC: 2 | DAC: 4

16 Jan 1996

3040-13-111-0547
Straight: Shaft

3040-13-108-3174
Flex Shaft Assembly

3040-13-113-7522
Straight: Shaft

3040-13-114-3856
Rig Connecting Link

3040-13-115-5488
Ball Joint:

3040-13-120-9402
Shouldered Axle

PM01017/0054: RNCC: 3 | RNVC: 2 | DAC: 2

3 Sep 2010

3040-13-107-2182
Pawl

DM274: RNCC: 3 | RNVC: 2 | DAC: 5

1 Apr 1975

3040-13-110-4410
Shaft Retaining Plate

24-057-1209-00: RNCC: 3 | RNVC: 2 | DAC: 6

10 Jun 1976

3040-13-118-2525
Bevel Gearshaft

3623851311: RNCC: 3 | RNVC: 2 | DAC: 2

28 Jun 2001

3040-13-113-1056
Left Coupling Shaft

CMT270/6/82-06: RNCC: 3 | RNVC: 2 | DAC: 2

29 Sep 1987

3040-13-116-6134
Pawl:

3040-13-118-2123
Remote Contro Lever

3040-13-116-6434
Manu Lever Assembly

3040-13-117-0539
Control Cam

3862210019: RNCC: 5 | RNVC: 2 | DAC: 2

4 Dec 1998

3040-13-121-1843
Rigid Connecting Link

R28702.00: RNCC: 3 | RNVC: 2 | DAC: 4

20 Jun 2011

3040-13-114-1016
Control Cam

50008701: RNCC: 3 | RNVC: 2 | DAC: 2

4 Mar 1992

3040-13-112-2816
Linear Actuating Cylinder Assembly

22520493-80: RNCC: 3 | RNVC: 2 | DAC: 2

20 Dec 1983

3040-13-114-6396
Flexible Drive Shaft

421027-0100: RNCC: 3 | RNVC: 2 | DAC: 6

7 Dec 1993

3040-13-117-1913
Clutch Torsion Bar

610.083.1700.10: RNCC: 3 | RNVC: 2 | DAC: 4

1 Mar 1999

Load More Results