Miscellaneous Power Transmission Equipment
Federal Supply Class (FSC): 3040
NATO Supply Classification Class (NSC): 3040
Group Description: Mechanical Power Transmission Equipment
Federal Supply Group (FSG): 30
NATO Supply Classification Group (NSG): 30
Page 37 of 575
Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.
Additional Information for Miscellaneous Power Transmission Equipment
NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.
Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.
Examples of items that fall under NATO Supply Class 3040 include:
1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.
2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.
3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.
4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.
5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.
6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.
7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.
8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.
NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.
NSN by Country
Frequently Asked Questions(FAQ) for Federal Supply Class 3040
- What is Federal Supply Class 3040?
- FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
- What is NATO Supply Classification Class 3040?
- NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
- Which Federal Supply Group is FSC 3040 in?
- FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
- Which NATO Supply Classification Group is NSC 3040 in?
- NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .
Supply Items Included in Federal Supply Class 3040
- What is a Push-Pull Control Assembly? 2425 Items
- A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
- What is a Transmission Fluid Cooler? 240 Items
- A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
- What is a Dual Disk Brake? 46 Items
- A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
- What is a Single Disk Brake? 139 Items
- A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
- What is an Expander Tube Brake? 14 Items
- An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
- What is a Multiple Disk Brake? 226 Items
- A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
- What is a Segmented Rotor Brake? 39 Items
- A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
- What is a Shoe Type Brake? 163 Items
- A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
- What is a Flexible Shafting? 203 Items
- A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
- What is a Flexible Shaft Assembly Core? 348 Items
- A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
- What is a Flexible Shaft Assembly Casing? 509 Items
- A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
- What is a Differential Spider? 118 Items
- A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
- What is a Breather? 472 Items
- A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
- What is a Brake Drum? 226 Items
- A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
- What is a Friction Lining? 854 Items
- A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
- What is a Piston Ring? 1114 Items
- A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
- What is a Shaft Collar? 5325 Items
- A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
- What is a Brake Lining Kit? 44 Items
- A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
- What is a Piston Ring Set? 91 Items
- A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
- What is a Ball Joint? 2503 Items
- A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
- What is a Double Ball Joint? 56 Items
- A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
- What is a Hydraulic Control Receiver-Transmitter? 46 Items
- A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
- What is a Worm Shaft? 1574 Items
- A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
- What is a Pedal Pad? 28 Items
- A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
- What is a Control Pedal? 222 Items
- A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
- What is a Friction Lining Material? 72 Items
- A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
- What is an Extension Shaft? 739 Items
- An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
- What is a Flexible Core End Fitting? 92 Items
- A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
- What is a Flexible Casing End Fitting? 259 Items
- A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
- What is a Flexible Casing Coupling Nut? 85 Items
- A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
- What is a Flexible Shaft Assembly? 1302 Items
- A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
- What is a Shaft Retaining Plate? 2593 Items
- A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
- What is a Flexible Drive Shaft? 1075 Items
- A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
- What is a Flexible Control Casing? 364 Items
- A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
- What is a Hydraulic Accumulator? 668 Items
- A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
- What is a Pneumatic Accumulator? 108 Items
- A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
- What is a Rigid Connecting Link? 27701 Items
- A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
- What is a Linear Actuating Cylinder? 3192 Items
- A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
- What is a Nonrotating Shaft Eye Bracket? 2279 Items
- A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
- What is a Rotating Shaft Eye Bracket? 1910 Items
- A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
- What is a Brake Backing Plate? 196 Items
- A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
- What is a Remote Control Lever? 8989 Items
- A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
- What is a Pawl? 3103 Items
- A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
- What is a Straight Shaft? 15830 Items
- A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
- What is a Detent Plate? 344 Items
- A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
- What is a Bell Crank? 3734 Items
- A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
- What is a Grease Cap? 205 Items
- A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
- What is a Shouldered Shaft? 29858 Items
- A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
- What is a Brake Drum Adapter? 22 Items
- A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
- What is a Hydraulic Accumulator Cylinder? 174 Items
- A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
- What is a Hub Clamp? 1267 Items
- A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
- What is a Body Hub? 2589 Items
- A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
- What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items
- A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
- What is a Hydraulic Accumulator Bladder? 113 Items
- A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
- What is a Friction Lining Set? 73 Items
- A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
- What is a Brake Shoe? 415 Items
- A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
- What is a Linear Actuating Cylinder Assembly? 10867 Items
- A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
- What is a Brake Band And Lining? 326 Items
- A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
- What is a Disk Brake Shoe? 151 Items
- A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
- What is a Disk Brake Shoe Set? 56 Items
- A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
- Parts Kit,Ball Joint 19 Items
- What is a Brake Shoe Parts Kit? 20 Items
- A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
- Parts Kit,Gearbox 91 Items
- Parts Kit,Oil Pan 16 Items
- What is a Counterbalance Weight? 4494 Items
- A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
- What is a Pneumatic Actuator Cylinder Housing? 192 Items
- A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
- What is a Belt-Chain Tension Adjusting Device? 273 Items
- A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
- What is a Bell Crank Support? 233 Items
- A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
- What is a Disc Brake Caliper Assembly? 67 Items
- A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
- What is a Disc Brake Caliper? 61 Items
- A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
- What is a Rotary Actuating Cylinder Assembly? 255 Items
- A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
- What is an Electrical-Fluid Pressure Connector Assembly? 163 Items
- An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
- What is a Push-Pull Control Assembly Parts Kit? 26 Items
- A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
- Wheel Assembly,Brake,Hose Reel 31 Items
- Shaft And Spring Assembly,Pressure Regulator 33 Items
- End Cap,Outer Shaft,Air Clutch 17 Items
- Hub,Range Clutch,Transmission 58 Items
- Shaft,Clutch,Transfer Drive 122 Items
- Pivot Shaft Assembly 427 Items
- What is a Shaft Idler? 214 Items
- A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
- What is a Piston Rod Ring? 611 Items
- A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
- Housing,Alteration 63 Items
- Sleeve,Transmission 209 Items
- Fitting,Lever 139 Items
- Cup,Piston Follower 34 Items
- What is a Piston Rod Guide? 264 Items
- A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
- What is a Shoe Brake Parts Kit? 39 Items
- A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
- What is a Straight Axle? 2615 Items
- A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
- What is a Shouldered Axle? 1620 Items
- A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
- What is a Shouldered Shaft Assembly? 935 Items
- A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
- What is a Brake Shoe Set? 47 Items
- A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
- What is a Disc Brake Caliper Parts Kit? 21 Items
- A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
- What is a Control Cable Assembly? 525 Items
- A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
- What is a Control Pedal Assembly? 57 Items
- A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
- What is a Ballscrew Assembly? 40 Items
- A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
- What is a Housing Adapter? 666 Items
- A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
- What is a Manual Control Lever Assembly? 459 Items
- A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
- What is a Cylinder Support? 318 Items
- A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
- What is a Multiple Gears Gearshaft? 1029 Items
- A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
- What is a Mechanically Actuated Spindle? 935 Items
- A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
- Arm,Brake 45 Items
- What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items
- A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
- What is a Mechanical Drive Housing Part? 508 Items
- A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
- What is a Clutch Torsion Bar? 15 Items
- A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
- What is a Brake Shoe Push Rod? 10 Items
- A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
- What is a Helical Gear And Shaft Assembly? 129 Items
- A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
- What is a Bevel Gear And Shaft Assembly? 110 Items
- A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
- What is a Spline Adapter? 209 Items
- A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
- What is a Control Cam Assembly? 112 Items
- A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
- What is a Straight Shaft Assembly? 671 Items
- A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
- What is a Shaft And Tube Support Assembly? 41 Items
- A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
- What is an Oil Distribution Box Shaft Assembly? 23 Items
- An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
- What is a Power Transmission Equipment Brake Band? 46 Items
- A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
- What is a Nonvehicular Propeller Shaft? 313 Items
- A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
- What is a Planetary Gears Carrier? 161 Items
- A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
- What is a Nonaircraft Mechanical Actuator? 1038 Items
- A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
- What is a Hydraulic Control Assembly? 217 Items
- A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
- What is a Control Cam? 7053 Items
- A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
- What is an Inertia Damper? 261 Items
- An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
- What is a Brake Disc? 738 Items
- A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
- What is a Bevel Gearshaft? 1352 Items
- A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
- What is a Bevel-Spur Gearshaft? 120 Items
- A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
- What is a Helical Gearshaft? 1470 Items
- A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
- What is a Helical-Spur Gearshaft? 216 Items
- A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
- What is a Spur Gearshaft? 10210 Items
- A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
- What is a Worm Wheel Gearshaft? 445 Items
- A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
- What is a Mechanical Drive Housing? 6041 Items
- A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
- What is a Controllable Swashplate? 118 Items
- A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
- What is a Manual Control Lever? 7610 Items
- A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
- What is a Linear Actuating Cylinder Cap? 804 Items
- A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
- What is a Linear Actuating Cylinder Piston? 3488 Items
- A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
- What is a Linear Actuating Cylinder Piston Rod? 1860 Items
- A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
- What is an Accumulator Cap? 102 Items
- An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
- What is a Linear Actuating Cylinder Head? 678 Items
- A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
- What is a Differential Gear Unit? 253 Items
- A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
- What is a Hydraulic Accumulator Piston Rod? 78 Items
- A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
- What is a Speedometer-Tachometer Drive Adapter? 257 Items
- A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
- What is a Band Type Brake? 21 Items
- A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
- What is a Tension Spring Assembly? 70 Items
- A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
- What is a Pneumatic Control Assembly? 39 Items
- A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
- What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items
- A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.
Stock Items From Supply Class 3040 Page 37of 575
- 011065912
- 10572-11-3
- RNCC: 3 | RNVC: 2
- 011065575
- 4017080
- RNCC: 3 | RNVC: 2
- 011063585
- 750P011C022-7
- RNCC: 3 | RNVC: 2
- 011063582
- 750P011C032-7
- RNCC: 3 | RNVC: 2
- 011063581
- 750P011C031-11
- RNCC: 3 | RNVC: 2
- 011062764
- 4029766
- RNCC: 3 | RNVC: 2
- 011062157
- 1376-97-118
- RNCC: 3 | RNVC: 2
- 1376-97-118-02
- RNCC: 5 | RNVC: 2
- 5521310
- RNCC: D | RNVC: 9
- 011061758
- 102-3
- RNCC: 3 | RNVC: 9
- 011061629
- 1755251
- RNCC: 3 | RNVC: 2
- 555-00-000000077
- RNCC: 5 | RNVC: 2
- 1755251
- RNCC: 5 | RNVC: 2
- 011061630
- 1755346
- RNCC: 3 | RNVC: 2
- 555-00-000000092
- RNCC: 5 | RNVC: 2
- 011061464
- 1755889-2
- RNCC: 3 | RNVC: 2
- 555-00-000000074
- RNCC: 5 | RNVC: 2
- 011061468
- 1755104
- RNCC: 3 | RNVC: 2
- 011061463
- 1755356-2
- RNCC: 3 | RNVC: 2
- 555-00-240000000
- RNCC: 5 | RNVC: 2
- 011061284
- SYLC866
- RNCC: 3 | RNVC: 2
- 011060818
- 23016857
- RNCC: 3 | RNVC: 2
- 6837628
- RNCC: 5 | RNVC: 9
- 011060016
- 137028
- RNCC: 3 | RNVC: 2
- AG-137028
- RNCC: 5 | RNVC: 9
- 011059922
- 5073D193-1
- RNCC: 3 | RNVC: 2
- 011059668
- A334A165-105
- RNCC: 3 | RNVC: 2
- 011057553
- 89376
- RNCC: 3 | RNVC: 2
- AG-89376
- RNCC: 5 | RNVC: 9
- 011056994
- 02320-0362-01
- RNCC: 3 | RNVC: 2
- 011056020
- 125949-3
- RNCC: 3 | RNVC: 2
- 011056019
- 125949-2
- RNCC: 3 | RNVC: 2
- 011055378
- 11737904
- RNCC: 3 | RNVC: 2
- 011055375
- 11737899
- RNCC: 3 | RNVC: 2
- 011055377
- 11737903
- RNCC: 3 | RNVC: 2
- 011055372
- 11737897
- RNCC: 3 | RNVC: 2
- 011054285
- 46296D481
- RNCC: 3 | RNVC: 2
- 46296D481
- RNCC: 5 | RNVC: 9
- 011053891
- 548-7969-004
- RNCC: 3 | RNVC: 2
- 011053824
- 8K9509
- RNCC: 3 | RNVC: 2
- 011052719
- 30030 ITEM 8
- RNCC: 3 | RNVC: 2
- B60522-01
- RNCC: 5 | RNVC: 9
- 30030
- RNCC: D | RNVC: 9
- 011050086
- 18-73013-1
- RNCC: 3 | RNVC: 2
- 011049532
- 114347
- RNCC: 3 | RNVC: 2
- AG-114347
- RNCC: 5 | RNVC: 9
- 011049153
- 12256355
- RNCC: 3 | RNVC: 2
- 011048675
- 1033C055
- RNCC: 3 | RNVC: 1
- 011048316
- 656839-1
- RNCC: 3 | RNVC: 2
- 011047013
- 011134
- RNCC: 3 | RNVC: 2
- PX140 TYPE H FLANGE
- RNCC: 5 | RNVC: 2
- PF172FLANGE
- RNCC: 5 | RNVC: 9
- 011046084
- PWA53881-12
- RNCC: 3 | RNVC: 2
- 011044138
- P57371
- RNCC: 3 | RNVC: 2
- 011044060
- A8-18
- RNCC: 3 | RNVC: 2
- S1-10
- RNCC: 3 | RNVC: 2
- 011042692
- 703716-1
- RNCC: 3 | RNVC: 2
- 011042303
- 12S1783-7
- RNCC: 3 | RNVC: 2
- 011041792
- D3NN-17365C
- RNCC: 3 | RNVC: 2
- 011039498
- 656780-2
- RNCC: 3 | RNVC: 2
- 011036359
- W/A200118
- RNCC: 3 | RNVC: 2
- 745625-1
- RNCC: 7 | RNVC: 2
- 011035013
- 5950-00
- RNCC: 3 | RNVC: 2
- 011034938
- 1-3838
- RNCC: 3 | RNVC: 2
- 011034311
- 8037-145
- RNCC: 3 | RNVC: 2
- 011034283
- S615814
- RNCC: 3 | RNVC: 2
- 011033969
- 658472-1
- RNCC: 3 | RNVC: 2
- 011033968
- 658471-1
- RNCC: 3 | RNVC: 2
- 011033971
- 703956-1
- RNCC: 3 | RNVC: 2
- 011033526
- 231-4992
- RNCC: 3 | RNVC: 2
- 011033120
- 703980-1
- RNCC: 3 | RNVC: 2
- 011033115
- LA-CH
- RNCC: 3 | RNVC: 2
- 011031651
- 658470-1
- RNCC: 3 | RNVC: 2
- 011030141
- 803-5001003-X7XX-29
- RNCC: 3 | RNVC: 2
- 803-5001003
- RNCC: D | RNVC: 9
- 011029223
- 10277009
- RNCC: 3 | RNVC: 2
- 011028579
- 12S1719-11
- RNCC: 3 | RNVC: 2
- 011028345
- 1492789
- RNCC: 3 | RNVC: 2
- 1492789
- RNCC: 5 | RNVC: 9
- 1492789-0001
- RNCC: 5 | RNVC: 9
- 011027292
- AP216070
- RNCC: 3 | RNVC: 2
- 011027163
- 12257579-2
- RNCC: 3 | RNVC: 2
- 011025746
- 3P3246
- RNCC: 3 | RNVC: 2
- 011025744
- L4-16
- RNCC: 3 | RNVC: 2
- 011019631
- 6441-61142-043
- RNCC: 3 | RNVC: 2
- 6441-61142
- RNCC: D | RNVC: 9
- 011019275
- 73710002-1
- RNCC: 3 | RNVC: 2
- 73710002-1
- RNCC: 5 | RNVC: 9
- 011019168
- 73710009-1
- RNCC: 3 | RNVC: 2
- 73710009-1
- RNCC: 5 | RNVC: 9
- 011019013
- 531113
- RNCC: 3 | RNVC: 2
- 011017411
- 029-001836
- RNCC: 3 | RNVC: 2
- 12510
- RNCC: 3 | RNVC: 2
- 12510
- RNCC: 5 | RNVC: 9
- 011008776
- CM-2992-9A
- RNCC: 3 | RNVC: 2
- NP2992009
- RNCC: 3 | RNVC: 2
- 2992009
- RNCC: 5 | RNVC: 9
- 011005014
- 100-601
- RNCC: 3 | RNVC: 2
- 011004588
- 168542-2
- RNCC: 3 | RNVC: 2
- 011000527
- MPI75074714
- RNCC: 3 | RNVC: 2
- SPINDLE,WHEEL
- RNCC: 3 | RNVC: 2
- MPI75074714
- RNCC: 5 | RNVC: 9
- SPINDLE,WHEEL
- RNCC: 5 | RNVC: 9
- 010999346
- 309883
- RNCC: 3 | RNVC: 2
- 010997795
- 1C952BA100J3AAL
- RNCC: 3 | RNVC: 9
- 010995176
- 3868W15G703
- RNCC: 3 | RNVC: 2
- 010994641
- 211095
- RNCC: 3 | RNVC: 2
- 010994416
- 2395271
- RNCC: 3 | RNVC: 2
- 010994408
- 089181
- RNCC: 3 | RNVC: 2
- 198810
- RNCC: 5 | RNVC: 9
- 198810
- RNCC: C | RNVC: 1
- 010994364
- 0520463
- RNCC: 3 | RNVC: 2
- 161540
- RNCC: 3 | RNVC: 2
- 010993667
- 6-013-000344
- RNCC: 3 | RNVC: 2
- 010991608
- 1459-45
- RNCC: 3 | RNVC: 2
- 010991576
- 8001879
- RNCC: 3 | RNVC: 2
- 010991575
- 1459-219
- RNCC: 3 | RNVC: 2
- 010991485
- 1459-204
- RNCC: 3 | RNVC: 2
- 010991172
- 236666
- RNCC: 3 | RNVC: 2
- 9-904-103917
- RNCC: 5 | RNVC: 9
- 236666
- RNCC: 5 | RNVC: 9
- 010989593
- 68A411057-2006
- RNCC: 3 | RNVC: 2
- 68A411057-2004
- RNCC: 5 | RNVC: 2
- 68A411057-1002
- RNCC: 5 | RNVC: 9
- 010989611
- 255373
- RNCC: 3 | RNVC: 2
- 010985400
- RR168K
- RNCC: 3 | RNVC: 2
- 010985324
- 282938
- RNCC: 3 | RNVC: 2
- 010985323
- 3225-9019-0
- RNCC: 3 | RNVC: 2
- 00554010
- RNCC: 5 | RNVC: 9
- 010985149
- 12287506
- RNCC: 3 | RNVC: 2
- 010985073
- 165104
- RNCC: 3 | RNVC: 2
- 010985072
- 165103
- RNCC: 3 | RNVC: 2
- 010984497
- 120621
- RNCC: 3 | RNVC: 2
- 010984095
- 1390-0245
- RNCC: 3 | RNVC: 2
- 1390-0245
- RNCC: 5 | RNVC: 9
- 010983426
- 68A411057-2005
- RNCC: 3 | RNVC: 2
- 68A411057-2003
- RNCC: 5 | RNVC: 2
- 68A411057-1001
- RNCC: 5 | RNVC: 9
- 010981800
- JS-15-2A
- RNCC: 3 | RNVC: 2
- 010979825
- 3B1151C1
- RNCC: 3 | RNVC: 9
- 010979577
- 3P3560
- RNCC: 3 | RNVC: 2
- 010977013
- 400957
- RNCC: 3 | RNVC: 2
- 400957
- RNCC: 5 | RNVC: 9
- 010976718
- 510248-1
- RNCC: 3 | RNVC: 2
- 010976483
- 8300-076
- RNCC: 3 | RNVC: 2
- 010976466
- 12524241
- RNCC: 3 | RNVC: 2
- 010975986
- 654M2004-29
- RNCC: 3 | RNVC: 2
- 010972974
- 12S1765-17
- RNCC: 3 | RNVC: 2
- 010972076
- 506-8468-002
- RNCC: 3 | RNVC: 2
- 010971006
- C31M6503-12
- RNCC: 3 | RNVC: 2
- C31M6503
- RNCC: D | RNVC: 9
- 010970197
- 30114
- RNCC: 3 | RNVC: 2
- 010968594
- 358746
- RNCC: 3 | RNVC: 2
- 010963222
- C31M2511-11
- RNCC: 3 | RNVC: 2
- 010963218
- 2472W14P003
- RNCC: 3 | RNVC: 2
- 2472W14
- RNCC: D | RNVC: 9
- 010962865
- 3FC11
- RNCC: 3 | RNVC: 2
- 3225-9017-0
- RNCC: 3 | RNVC: 2
- 00408810
- RNCC: 5 | RNVC: 9
- 010962717
- 12S1723-9
- RNCC: 3 | RNVC: 2
- 010962576
- C553-1801
- RNCC: 3 | RNVC: 2
- 010962545
- 160D997836-117
- RNCC: 3 | RNVC: 2
- 010962543
- C31M2512-11
- RNCC: 3 | RNVC: 2
- 010961366
- GN-52-2S
- RNCC: 3 | RNVC: 2
- 010960252
- 484764-1
- RNCC: 3 | RNVC: 2
- 484764-1
- RNCC: 5 | RNVC: 9
- 010959690
- C31M2510-11
- RNCC: 3 | RNVC: 2
- 010957601
- 114D2045-9
- RNCC: 3 | RNVC: 2
- 010957531
- 70400-02155-102
- RNCC: 3 | RNVC: 2
- 010957530
- 2227052-1
- RNCC: 3 | RNVC: 2
- 010956011
- B240X6
- RNCC: 3 | RNVC: 2
- 010955942
- C31M2207-1
- RNCC: 3 | RNVC: 2
- 010955873
- C31M2505-11
- RNCC: 3 | RNVC: 2
- 010955508
- TG10DDCA1AA11000
- RNCC: 3 | RNVC: 2
- SH-32X11CB1-5U
- RNCC: 5 | RNVC: 9
- 010955459
- 22630
- RNCC: 3 | RNVC: 2
- 010955266
- 101581-3
- RNCC: 3 | RNVC: 2
- 010954832
- 2741586
- RNCC: 3 | RNVC: 2
- 010954586
- 114D5245-10
- RNCC: 3 | RNVC: 2
- 010954588
- 114D1245-7
- RNCC: 3 | RNVC: 2
- 010954587
- 114D1044-14
- RNCC: 3 | RNVC: 2
- 010953564
- 5073J166-1
- RNCC: 3 | RNVC: 2
- 5073J166
- RNCC: D | RNVC: 9
- 010953496
- 481289-2
- RNCC: 3 | RNVC: 2
- 481289-2
- RNCC: 5 | RNVC: 9
- 010951099
- 3F21291-101
- RNCC: 3 | RNVC: 2
- 010950996
- C31M2002-1
- RNCC: 3 | RNVC: 2
- 010950514
- 70400-02239-041
- RNCC: 3 | RNVC: 2
- 010949730
- 323657
- RNCC: 3 | RNVC: 2
- 323657
- RNCC: 5 | RNVC: 2
- 323657
- RNCC: 5 | RNVC: 9
- 323657
- RNCC: 5 | RNVC: 9
- 323657
- RNCC: 5 | RNVC: 9
- 010948610
- 114D1243-8
- RNCC: 3 | RNVC: 2
- 010948608
- 114D6244-7
- RNCC: 3 | RNVC: 2
- 010948609
- 114D5068-7
- RNCC: 3 | RNVC: 2
- 010948582
- 114D5250-3
- RNCC: 3 | RNVC: 2
- 010946848
- S3-23
- RNCC: 3 | RNVC: 2
- 010945179
- 13047773
- RNCC: 3 | RNVC: 2
- B52085
- RNCC: 5 | RNVC: 2
- 13047773
- RNCC: D | RNVC: 9
- 010943623
- 533042-1
- RNCC: 3 | RNVC: 2
- 010941670
- 3227-3034-5
- RNCC: 3 | RNVC: 2
- 00646620
- RNCC: 5 | RNVC: 9
- 010941134
- 975683-1
- RNCC: 3 | RNVC: 2
- 975683-1
- RNCC: 5 | RNVC: 9
- 010940068
- 3227-3079-0
- RNCC: 3 | RNVC: 2
- 00646920
- RNCC: 5 | RNVC: 9
- 010939575
- 748849-1
- RNCC: 3 | RNVC: 2
- 010939576
- 23-2728-502
- RNCC: 3 | RNVC: 2
- 010938363
- 5073E115-15
- RNCC: 3 | RNVC: 2
- 010938206
- 883432-1
- RNCC: 3 | RNVC: 2
- 010936710
- 3531069
- RNCC: 3 | RNVC: 2
- 010936102
- 3017268
- RNCC: 3 | RNVC: 2
- 3224045 ITEM 14
- RNCC: 5 | RNVC: 2
- 010935502
- 2033086-1
- RNCC: 3 | RNVC: 2
- 010934019
- 656525
- RNCC: 3 | RNVC: 2
- 010932982
- 3853-1-8
- RNCC: 3 | RNVC: 2
- 010932980
- 3853-1-11
- RNCC: 3 | RNVC: 2
- 010932806
- 505427
- RNCC: 3 | RNVC: 2
- 505427
- RNCC: 5 | RNVC: 9
- 010932822
- 12009034
- RNCC: 3 | RNVC: 2
- 010932003
- 9662M62P03
- RNCC: 3 | RNVC: 2
- 010931829
- 32377-003-13FT
- RNCC: 3 | RNVC: 9
- 3003-075-0396
- RNCC: 5 | RNVC: 2
- 32377-003-13FT
- RNCC: 5 | RNVC: 9
- 33BC13FT
- RNCC: 5 | RNVC: 9
- 33BC13FT
- RNCC: 5 | RNVC: 9
- 33C-13FT
- RNCC: 5 | RNVC: 9
- 33C-13FT
- RNCC: 5 | RNVC: 9
- 010931099
- 033099
- RNCC: 3 | RNVC: 2
- 646B033099
- RNCC: 5 | RNVC: 2
- 646B033099
- RNCC: 5 | RNVC: 9
- 010930981
- 23-2728-501
- RNCC: 3 | RNVC: 2
- 23-2728-501
- RNCC: 5 | RNVC: 2
- 010930414
- 667712-1
- RNCC: 3 | RNVC: 2
- 667712
- RNCC: D | RNVC: 9
- 010929518
- 12277787
- RNCC: 3 | RNVC: 2
- 010926183
- 890249
- RNCC: 3 | RNVC: 2
- M-A129-20000
- RNCC: 5 | RNVC: 2
- 010925914
- 4059012
- RNCC: 3 | RNVC: 2
- 010922723
- 9P25
- RNCC: 3 | RNVC: 2
- 010922573
- 3897472
- RNCC: 3 | RNVC: 2
- 010922077
- 70400-01250-044
- RNCC: 3 | RNVC: 2
- 010922047
- 4000238
- RNCC: 3 | RNVC: 2
- 4000238
- RNCC: 5 | RNVC: 9
- 010921807
- 215434
- RNCC: 3 | RNVC: 2
- 215434
- RNCC: 5 | RNVC: 9
- 010917576
- 3015889
- RNCC: 3 | RNVC: 2
- 010917526
- 12009033
- RNCC: 3 | RNVC: 2
- 010917514
- 534623
- RNCC: 3 | RNVC: 2
- 534623
- RNCC: 5 | RNVC: 9
- 010917498
- 526560001-2001
- RNCC: 3 | RNVC: 2
- 010917429
- B-10-343-1
- RNCC: 3 | RNVC: 9
- 010915656
- 12009032
- RNCC: 3 | RNVC: 2
- 010914234
- 3227-3032-0
- RNCC: 3 | RNVC: 2
- 00286920
- RNCC: 5 | RNVC: 9
- 010914160
- 302605-001
- RNCC: 3 | RNVC: 2
- 010914070
- 3207-2005-0
- RNCC: 3 | RNVC: 2
- 00151310
- RNCC: 5 | RNVC: 9
- 010913631
- 10553199
- RNCC: 3 | RNVC: 2