What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

✨ Tired of ads? Register and login for a clean, ad-free experience!

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 2 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149442 Items

FR
France
43199 Items

UK
United Kingdom
31329 Items

DE
Germany
16659 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2424 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 239 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 505 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 469 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 227 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 849 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1096 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5323 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2498 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1573 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 721 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2591 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1072 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 363 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 667 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27690 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3189 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2276 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1909 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8947 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3100 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15829 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 343 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3727 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29810 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 173 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1266 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2588 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 414 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10869 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 325 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4446 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 191 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 272 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 254 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 46 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 526 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 664 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 458 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 317 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1028 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 208 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 670 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 307 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 160 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1028 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 216 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7048 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 257 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6038 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 117 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3479 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1850 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 253 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 71 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 38 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 2of 575

3040-01-354-0411
Linear Ac Parts Kit

013540411
AH137208: RNCC: 3 | RNVC: 2
AH137208: RNCC: 5 | RNVC: 9

21 Feb 1992

3040-01-353-8525
Di Caliper Assembly

013538525
SB06605: RNCC: 3 | RNVC: 2
6750-A: RNCC: 5 | RNVC: 2

19 Feb 1992

3040-01-353-8348
Straight Shaft

013538348
622219-1: RNCC: 3 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 9
622219-1: RNCC: 5 | RNVC: 9
622219-1: RNCC: 5 | RNVC: 9

18 Feb 1992

3040-01-353-4693
Bell Crank

013534693
17P6F1054-1: RNCC: 3 | RNVC: 2

11 Feb 1992

3040-01-352-9166
Rig Connecting Link

013529166
214-001-023-107: RNCC: 3 | RNVC: 2
214-001-023: RNCC: D | RNVC: 9

1 Feb 1992

3040-01-352-9125
A Cylinder Assembly

013529125
6-372-003441: RNCC: 3 | RNVC: 2
2HG4: RNCC: C | RNVC: 1

1 Feb 1992

3040-01-352-1314
Multiple Gearshaft

013521314
101119-2: RNCC: 3 | RNVC: 2

20 Jan 1992

3040-01-350-6311
Shouldered Shaft

013506311
1W8410: RNCC: 3 | RNVC: 2

19 Dec 1991

3040-01-350-3314
Friction Lining Set

013503314
13.5-8480-17X18X47: RNCC: 3 | RNVC: 2
468480 PIECE 17: RNCC: 5 | RNVC: 2

13 Dec 1991

3040-01-349-8696
Rig Connecting Link

013498696
5058T65P01: RNCC: 3 | RNVC: 2
178293-X: RNCC: 5 | RNVC: 2
HTLK4-4: RNCC: 5 | RNVC: 2
10159295: RNCC: 6 | RNVC: 9
5058T65: RNCC: D | RNVC: 9
5058T27G01: RNCC: E | RNVC: 8

5 Dec 1991

3040-01-349-7892
Spur Gearshaft

013497892
8521-14: RNCC: 3 | RNVC: 2

4 Dec 1991

3040-01-349-7363
Shouldered Shaft

013497363
DGB000-92901580: RNCC: 3 | RNVC: 2
5-39MIL1-1204-15: RNCC: 5 | RNVC: 9
5-227 ITEM 15 5-39MIL-1204: RNCC: 5 | RNVC: 9
5-39MIL 1-1204-15: RNCC: 5 | RNVC: 9

3 Dec 1991

3040-01-349-6927
Inertia Damper

013496927
12479785: RNCC: 1 | RNVC: 2
12426: RNCC: 3 | RNVC: 2
1242600: RNCC: 5 | RNVC: 2
12426: RNCC: 5 | RNVC: 9
12426: RNCC: 5 | RNVC: 9
12426: RNCC: 5 | RNVC: 9
1242600: RNCC: 5 | RNVC: 9
1242600: RNCC: 5 | RNVC: 9

2 Dec 1991

3040-01-348-8024
Shouldered Shaft

013488024
5-39MIL1-0803-15: RNCC: 3 | RNVC: 9
5-227 ITEM 15 5-39MIL1-0803: RNCC: 5 | RNVC: 2
5-39MIL1-0803-15: RNCC: 5 | RNVC: 2
5-227: RNCC: D | RNVC: 9

16 Nov 1991

3040-01-348-8023
Shouldered Shaft

013488023
11-39MIL1-2006-16: RNCC: 3 | RNVC: 9
11-39MIL1-2006-15: RNCC: 5 | RNVC: 2
5-227 ITEM 15 11-39MIL1-2006: RNCC: 5 | RNVC: 2
11-39MIL1-2006-15: RNCC: 5 | RNVC: 9
5-227: RNCC: D | RNVC: 9

16 Nov 1991

3040-01-348-2405
Rig Connecting Link

013482405
4F54178-143B: RNCC: 3 | RNVC: 2
4F54178-143: RNCC: 5 | RNVC: 2
4F54178-143B: RNCC: 5 | RNVC: 9

6 Nov 1991

3040-01-348-1517
Piston Rod Ring

013481517
740369-21: RNCC: 3 | RNVC: 2

5 Nov 1991

3040-01-347-7921
Breather

013477921
6310226-138: RNCC: 1 | RNVC: 2
WC-00394-41D5BVA: RNCC: 3 | RNVC: 2
WC-00394-41D5BVA: RNCC: 5 | RNVC: 2
WE-00394-41B: RNCC: 5 | RNVC: 9
6310226-138: RNCC: 5 | RNVC: 9

29 Oct 1991

3040-01-346-4754
Worm Shaft

013464754
993240: RNCC: 3 | RNVC: 9
993240-1: RNCC: 5 | RNVC: 9
993600PL FIND 3: RNCC: 5 | RNVC: 9

5 Oct 1991

3040-01-345-0548
Shaft Retaining Plate

013450548
12347351: RNCC: 3 | RNVC: 2
12347351: RNCC: 5 | RNVC: 2

11 Sep 1991

3040-01-343-8678
Rigid Connecting Link

013438678
70400-02291-104: RNCC: 3 | RNVC: 2
3040PL1938568: RNCC: 6 | RNVC: 9

17 Aug 1991

3040-01-343-2941
Housing Adapter

013432941
6SE01170-1: RNCC: 3 | RNVC: 2
ADU-567/E: RNCC: 5 | RNVC: 1

9 Aug 1991

3040-01-343-1884
Straight Shaft

013431884
87494: RNCC: 3 | RNVC: 2

7 Aug 1991

3040-01-343-0704
Control Cam

013430704
3035-450: RNCC: 3 | RNVC: 2
3035-450: RNCC: 5 | RNVC: 2
3035-450: RNCC: 5 | RNVC: 2

4 Aug 1991

3040-01-342-5214
Rig Connecting Link

013425214
4436-154: RNCC: 3 | RNVC: 2

25 Jul 1991

3040-01-342-4803
Rigid Connecting Link

013424803
4071755: RNCC: 3 | RNVC: 2
4071756: RNCC: 5 | RNVC: 2
4071757: RNCC: 5 | RNVC: 2
4071759: RNCC: 5 | RNVC: 2
4071755: RNCC: 5 | RNVC: 2
4071759: RNCC: 5 | RNVC: 2
4071756: RNCC: 5 | RNVC: 2
4071757: RNCC: 5 | RNVC: 2
4071755: RNCC: 5 | RNVC: 9
4071756: RNCC: 5 | RNVC: 9

24 Jul 1991

3040-01-342-4425
Multiple Disk Brake

013424425
536290: RNCC: 3 | RNVC: 2
AA191071: RNCC: 3 | RNVC: 2
AA191071: RNCC: 5 | RNVC: 9
AA19107-1: RNCC: 5 | RNVC: 9
536290: RNCC: 5 | RNVC: 9

23 Jul 1991

3040-01-342-0644
Housing Adapter

013420644
115644162: RNCC: 3 | RNVC: 2
115654161 PC 16: RNCC: 5 | RNVC: 2

14 Jul 1991

3040-01-341-6587
Linear Ac Parts Kit

013416587
L070750005: RNCC: 3 | RNVC: 2

5 Jul 1991

3040-01-341-2241
Control Cam

013412241
934: RNCC: 3 | RNVC: 2
934-40: RNCC: C | RNVC: 1

26 Jun 1991

3040-01-340-5913
Shouldered Shaft

013405913
70700-20130-102: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-340-5900
Friction Lining

013405900
15221003-109: RNCC: 3 | RNVC: 9
15221003-109: RNCC: 5 | RNVC: 2
15221003-109: RNCC: 5 | RNVC: 9
15221003: RNCC: D | RNVC: 9

17 Jun 1991

3040-01-340-0213
Bevel Gearshaft

013400213
2677651: RNCC: 3 | RNVC: 2
2677651: RNCC: 5 | RNVC: 2
2677651: RNCC: 5 | RNVC: 9

6 Jun 1991

3040-01-339-9763
Shouldered Shaft

013399763
1112312: RNCC: 3 | RNVC: 2

5 Jun 1991

3040-01-339-7540
Actuating Cylinder

013397540
101401-2: RNCC: 3 | RNVC: 2

29 May 1991

3040-01-339-7507
Shouldered Shaft

013397507
70654-23801-102: RNCC: 1 | RNVC: 2
DS-937978: RNCC: 3 | RNVC: 2
937978: RNCC: 3 | RNVC: 2

29 May 1991

3040-01-339-3580
A Cylinder Assembly

013393580
1H2H0A00075124: RNCC: 3 | RNVC: 2
4.0CBB2HTS14AC52.0: RNCC: 5 | RNVC: 9
1H000075124: RNCC: 5 | RNVC: 9
CG160622AA: RNCC: 5 | RNVC: 9
GG160622AA: RNCC: 5 | RNVC: 9

21 May 1991

3040-01-339-1583
Shouldered Shaft

013391583
762817: RNCC: 3 | RNVC: 2
751608: RNCC: 5 | RNVC: 9

17 May 1991

3040-01-339-0518
Spur Gearshaft

013390518
747450: RNCC: 3 | RNVC: 2

15 May 1991

NSN 3040-01-339-0510 013390510 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-01-339-0510
Linear Actuating Cylinder Assembly

013390510
R59: RNCC: 3 | RNVC: 2
RC59: RNCC: 5 | RNVC: 9
RC-59: RNCC: 5 | RNVC: 9
HSR-59T: RNCC: 5 | RNVC: 9
12913203: RNCC: 5 | RNVC: 9

15 May 1991

3040-01-339-0419
Shouldered Shaft

013390419
742407: RNCC: 3 | RNVC: 2

15 May 1991

3040-01-338-4419
Straight Shaft

013384419
167C2973: RNCC: 3 | RNVC: 2

3 May 1991

3040-01-338-3697
Manual Contro Lever

013383697
1318406: RNCC: 3 | RNVC: 2
1318406: RNCC: 5 | RNVC: 9

3 May 1991

3040-01-338-2412
A Cylinder Assembly

013382412
TL15HAXX3AAAK137: RNCC: 3 | RNVC: 2
TL15HACX3AAG8356: RNCC: 5 | RNVC: 9
TL15HACX3AAAK137: RNCC: 5 | RNVC: 9
G8356: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-337-6174
Shouldered Shaft

013376174
157D3606: RNCC: 3 | RNVC: 2

18 Apr 1991

3040-01-337-4549
Linear Actuating Cylinder Head

013374549
CB27583-001: RNCC: 3 | RNVC: 2
29527: RNCC: 3 | RNVC: 9
895-29475 ITEM 8: RNCC: 5 | RNVC: 2
895-29475 REV G ITEM 8: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-336-8209
Mechanical Drive Housing

013368209
8928530: RNCC: 3 | RNVC: 2
2GH665: RNCC: 5 | RNVC: 2
2GH665: RNCC: 5 | RNVC: 9

3 Apr 1991

3040-01-335-9817
Rig Connecting Link

013359817
A84029-1: RNCC: 3 | RNVC: 2
A84029-1: RNCC: 5 | RNVC: 9
A84029: RNCC: D | RNVC: 9

17 Mar 1991

3040-01-335-1828
Manual Contro Lever

013351828
1076-05: RNCC: 3 | RNVC: 2

6 Mar 1991

3040-01-334-9258
Hub Clamp

013349258
1252143: RNCC: 3 | RNVC: 2
1252143: RNCC: 5 | RNVC: 9

4 Mar 1991

3040-01-334-4900
Straight Shaft

013344900
36-155-110: RNCC: 3 | RNVC: 2

23 Feb 1991

3040-01-334-2068
Brake Shoe

013342068
15222001-001: RNCC: 3 | RNVC: 9
15222001-001: RNCC: 5 | RNVC: 2
15222001-003: RNCC: 5 | RNVC: 9
15222001-001: RNCC: 5 | RNVC: 9

17 Feb 1991

3040-01-334-0751
Rigid Connecting Link

013340751
753665-2: RNCC: 3 | RNVC: 2

14 Feb 1991

3040-01-333-8269
Mechanical Housing

013338269
8555-121: RNCC: 3 | RNVC: 2

9 Feb 1991

3040-01-333-8241
Shou Shaft Assembly

013338241
8W3589: RNCC: 3 | RNVC: 2

9 Feb 1991

3040-01-333-0542
Rigid Connecting Link

013330542
209-001-079-101: RNCC: 3 | RNVC: 2

21 Jan 1991

3040-01-332-1669
Rigid Connecting Link

013321669
495-300220-1: RNCC: 3 | RNVC: 2
495-300220-1: RNCC: 5 | RNVC: 9
495-300220-1: RNCC: 5 | RNVC: 9
495-300220-1: RNCC: 5 | RNVC: 9
495-300220: RNCC: D | RNVC: 9

5 Jan 1991

3040-01-332-0074
Linear Ac Parts Kit

013320074
RE25151: RNCC: 3 | RNVC: 2
RE25151: RNCC: 5 | RNVC: 2
RE25151: RNCC: 5 | RNVC: 9

31 Dec 1990

3040-01-331-8761
Shaft Collar

013318761
62709 ITEM 10: RNCC: 3 | RNVC: 2
6975-032: RNCC: 5 | RNVC: 2
62709: RNCC: D | RNVC: 9

29 Dec 1990

3040-01-331-5492
Extension Shaft

013315492
865B1110: RNCC: 3 | RNVC: 2

20 Dec 1990

3040-01-330-6125
Nonrota Eye Bracket

013306125
110973: RNCC: 3 | RNVC: 2
219034 FIND 26: RNCC: 5 | RNVC: 2

5 Dec 1990

3040-01-329-9926
Mechanical Housing

013299926
A-3226-R-1006: RNCC: 3 | RNVC: 2
A-3226-R-1006: RNCC: 5 | RNVC: 2
1656924C91: RNCC: 5 | RNVC: 2

28 Nov 1990

NSN 3040-01-329-2189 013292189 CYLINDER, HYDRAULIC, RAMP LIFTING

3040-01-329-2189
Ramp Lifting Hydraulic Cylinder

013292189
CJ69D0708: RNCC: 3 | RNVC: 2
122605027: RNCC: 5 | RNVC: 2
NKMZ.306446.001: RNCC: 5 | RNVC: 2
122605027: RNCC: 5 | RNVC: 9
3040PL0883528: RNCC: 6 | RNVC: 9
3040013292189: RNCC: 6 | RNVC: 9
7532461-1: RNCC: 7 | RNVC: 2
7532461-1: RNCC: 8 | RNVC: 2

13 Nov 1990

3040-01-327-2763
Extension Shaft

013272763
22516: RNCC: 3 | RNVC: 2
22516: RNCC: 5 | RNVC: 1
25162: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-327-0532
Spline Adapter

013270532
2165901: RNCC: 3 | RNVC: 2
2165901: RNCC: 5 | RNVC: 1

5 Oct 1990

3040-01-326-9722
Control Cam

013269722
2042376-1: RNCC: 3 | RNVC: 2

4 Oct 1990

3040-01-326-9710
Shouldered Shaft

013269710
754616: RNCC: 3 | RNVC: 2

4 Oct 1990

3040-01-326-9122
Shouldered Shaft

013269122
23015: RNCC: 3 | RNVC: 2

3 Oct 1990

3040-01-326-9121
Shouldered Shaft

013269121
21607: RNCC: 3 | RNVC: 2

3 Oct 1990

3040-01-326-0871
A Cylinder Assembly

013260871
MS2-3A-CC-6.00-37.75-HIM1A: RNCC: 3 | RNVC: 2
MS2-3A-CC-6.00-37.75-HIM1A: RNCC: 3 | RNVC: 9
MS2-3A-CC-6.00: RNCC: 5 | RNVC: 9

18 Sep 1990

3040-01-326-0870
A Cylinder Assembly

013260870
MS2-3A-CC-6.00-51.625-HIM1A: RNCC: 3 | RNVC: 9
MS2-3A-CC-6.00-51.625-HIM1A: RNCC: 5 | RNVC: 2

18 Sep 1990

3040-01-325-8079
Spur Gearshaft

013258079
749418: RNCC: 3 | RNVC: 2

11 Sep 1990

3040-01-325-7874
Bell Crank Support

013257874
70400-08163-043: RNCC: 3 | RNVC: 2
70400-08163-102-044-043: RNCC: 5 | RNVC: 2
70400-08163-043: RNCC: 5 | RNVC: 2

11 Sep 1990

3040-01-325-6341
Rig Connecting Link

013256341
4F23660-137A: RNCC: 3 | RNVC: 2

7 Sep 1990

3040-01-325-3029
Remote Contro Lever

013253029
3D9777: RNCC: 3 | RNVC: 2

31 Aug 1990

3040-01-323-9840
Remote Contro Lever

013239840
7002593-2: RNCC: 3 | RNVC: 2
7002593-2: RNCC: 5 | RNVC: 2

7 Aug 1990

3040-01-323-9839
Remote Contro Lever

013239839
3825093-4: RNCC: 3 | RNVC: 2
3825093-4: RNCC: 5 | RNVC: 2
3825093-4: RNCC: 5 | RNVC: 9
10107024: RNCC: 6 | RNVC: 9

7 Aug 1990

3040-01-323-9805
Straight Shaft

013239805
7002597-2: RNCC: 3 | RNVC: 2
7002597-2: RNCC: 5 | RNVC: 2
10130528: RNCC: 6 | RNVC: 9

6 Aug 1990

3040-01-323-9514
Hydraulic Swiv Ring

013239514
AE15070-001: RNCC: 3 | RNVC: 2

6 Aug 1990

3040-01-323-8663
Straight Shaft

013238663
3825156-1: RNCC: 3 | RNVC: 2
382156-1: RNCC: 5 | RNVC: 1
3825156-1: RNCC: 5 | RNVC: 2
3825156-1: RNCC: 5 | RNVC: 9
10107022: RNCC: 6 | RNVC: 9
3825156-1: RNCC: C | RNVC: 1
3825156: RNCC: D | RNVC: 9
3825156-10019: RNCC: D | RNVC: 9

5 Aug 1990

3040-01-323-3415
Shouldered Shaft

013233415
7002536: RNCC: 3 | RNVC: 2
7002536-1: RNCC: 5 | RNVC: 2
7002536-1: RNCC: 5 | RNVC: 2
7002536-1: RNCC: 5 | RNVC: 9
10107021: RNCC: 6 | RNVC: 9
7002536: RNCC: E | RNVC: 8

26 Jul 1990

3040-01-323-1801
Mechanical Housing

013231801
5544108: RNCC: 3 | RNVC: 2
5544108: RNCC: 5 | RNVC: 2

23 Jul 1990

3040-01-322-9362
Rig Connecting Link

013229362
SW34700-1: RNCC: 3 | RNVC: 2
SW28598: RNCC: 5 | RNVC: 9
SW32247: RNCC: 5 | RNVC: 9
SW34700: RNCC: D | RNVC: 9

17 Jul 1990

3040-01-322-9049
Hydrauli Piston Rod

013229049
K514745: RNCC: 3 | RNVC: 2
A514745: RNCC: 3 | RNVC: 9

17 Jul 1990

3040-01-322-6295
Spur Gear Cluster

013226295
5544117: RNCC: 3 | RNVC: 2
5544117: RNCC: D | RNVC: 9

11 Jul 1990

3040-01-322-4227
Brake Backing Plate

013224227
8-002-103-01-30B: RNCC: 3 | RNVC: 9

5 Jul 1990

3040-01-322-0684
Rig Connecting Link

013220684
16P1103-803: RNCC: 3 | RNVC: 2
16P1103-803: RNCC: 5 | RNVC: 2
16P1103-803: RNCC: 5 | RNVC: 2
16P1103-803: RNCC: 5 | RNVC: 2
3040PL0669132: RNCC: 6 | RNVC: 9

28 Jun 1990

3040-01-322-0683
Remote Contro Lever

013220683
4074624: RNCC: 3 | RNVC: 2
4074624: RNCC: 5 | RNVC: 2
3040PL0669121: RNCC: 6 | RNVC: 9

28 Jun 1990

3040-01-321-5103
Rig Connecting Link

013215103
16P3102-801: RNCC: 3 | RNVC: 2
16P3102-801: RNCC: 5 | RNVC: 2
16P3102-80: RNCC: 8 | RNVC: 2

19 Jun 1990

3040-01-320-9504
Rig Connecting Link

013209504
4069877: RNCC: 3 | RNVC: 2
3040PL0668846: RNCC: 6 | RNVC: 9

6 Jun 1990

3040-01-320-4262
Rigid Connecting Link

013204262
4074709: RNCC: 3 | RNVC: 2
4074709: RNCC: 5 | RNVC: 2
4074711: RNCC: 5 | RNVC: 2
4074710: RNCC: 5 | RNVC: 2
4074711: RNCC: 5 | RNVC: 2
4071760: RNCC: 5 | RNVC: 2
4074710: RNCC: 5 | RNVC: 2
4071760: RNCC: 5 | RNVC: 2
4074711: RNCC: 5 | RNVC: 9

24 May 1990

3040-01-320-4261
Rig Connecting Link

013204261
4073564: RNCC: 3 | RNVC: 2
4073564: RNCC: 5 | RNVC: 2
3040PL0668565: RNCC: 6 | RNVC: 9

24 May 1990

3040-01-320-4260
Rig Connecting Link

013204260
4071328: RNCC: 3 | RNVC: 2
4071328: RNCC: 5 | RNVC: 2
4071328: RNCC: 5 | RNVC: 9
3040PL0668556: RNCC: 6 | RNVC: 9

24 May 1990

3040-01-319-9504
Control Cam

013199504
2676564: RNCC: 3 | RNVC: 2

17 May 1990

3040-01-317-0271
Rigid Connecting Link

013170271
4069279: RNCC: 3 | RNVC: 2
4069279: RNCC: 5 | RNVC: 2
3040PL0668545: RNCC: 6 | RNVC: 9

21 Mar 1990

3040-01-316-7286
Rotatin Eye Bracket

013167286
4074199: RNCC: 3 | RNVC: 2
4074199: RNCC: 5 | RNVC: 2
4074199: RNCC: 5 | RNVC: 2
3040PL0668528: RNCC: 6 | RNVC: 9

14 Mar 1990

3040-01-316-3261
Flex Shaft Assembly

013163261
1858851: RNCC: 3 | RNVC: 2
1977616 ITEM 7: RNCC: 5 | RNVC: 2

8 Mar 1990

3040-01-316-0634
A Cylinder Assembly

013160634
204087: RNCC: 3 | RNVC: 2
204087: RNCC: 5 | RNVC: 2
1589AS604-1: RNCC: 5 | RNVC: 9
600-1786: RNCC: 5 | RNVC: 9
600-1786: RNCC: 5 | RNVC: 9

2 Mar 1990

3040-01-315-2505
Rig Connecting Link

013152505
5125986: RNCC: 3 | RNVC: 2
3040PL0956397: RNCC: 6 | RNVC: 9

13 Feb 1990

3040-01-314-7911
Shouldered Shaft

013147911
02-6102-02: RNCC: 3 | RNVC: 2
02-6102-02: RNCC: 3 | RNVC: 9

6 Feb 1990

3040-01-314-5180
Rig Connecting Link

013145180
5143133: RNCC: 3 | RNVC: 2
3040PL0956254: RNCC: 6 | RNVC: 9

31 Jan 1990

3040-01-314-5176
Remote Contro Lever

013145176
5139542: RNCC: 3 | RNVC: 2
3040PL0951141: RNCC: 6 | RNVC: 9

31 Jan 1990

3040-01-313-6647
Pawl

013136647
S600018: RNCC: 3 | RNVC: 2
600018: RNCC: 3 | RNVC: 9

12 Jan 1990

3040-01-312-4237
Linear Actuating Cylinder Assembly

013124237
1H2H0A00270353: RNCC: 3 | RNVC: 2
GG122908G0: RNCC: 5 | RNVC: 9

15 Dec 1989

3040-01-312-1352
Linear Actua Piston

013121352
220812TD1: RNCC: 3 | RNVC: 2
220812TD1: RNCC: 3 | RNVC: 9
220812TD1: RNCC: 5 | RNVC: 9
11025012: RNCC: 5 | RNVC: 9

12 Dec 1989

3040-01-311-9528
Manual Contro Lever

013119528
B49361MFD: RNCC: 3 | RNVC: 2
D52008 ITEM 16: RNCC: 5 | RNVC: 2
D49445-VEN ITEM NO 16: RNCC: C | RNVC: 1
D49445-VTN ITEM NO 16: RNCC: C | RNVC: 1
D52008: RNCC: D | RNVC: 9

7 Dec 1989

3040-01-311-5092
Mechanical Housing

013115092
10029101: RNCC: 3 | RNVC: 2

29 Nov 1989

3040-01-311-3246
A Cylinder Assembly

013113246
GG122908C0: RNCC: 3 | RNVC: 2

23 Nov 1989

3040-01-311-2567
Shouldered Shaft

013112567
A1022A152: RNCC: 3 | RNVC: 2

22 Nov 1989

3040-01-310-2137
Flexible Sha Casing

013102137
4059848: RNCC: 1 | RNVC: 2
441451-ISS1: RNCC: 3 | RNVC: 2
441451: RNCC: 3 | RNVC: 9
3040PL1601323: RNCC: 6 | RNVC: 9
3040PL0668463: RNCC: 6 | RNVC: 9

1 Nov 1989

3040-01-310-0037
Shaft Collar

013100037
S8542HA: RNCC: 3 | RNVC: 2

27 Oct 1989

3040-01-309-8417
Bell Crank

013098417
116113-2: RNCC: 3 | RNVC: 2

24 Oct 1989

3040-01-309-7950
Rig Connecting Link

013097950
116038-11: RNCC: 3 | RNVC: 2

23 Oct 1989

3040-01-309-7949
Rig Connecting Link

013097949
116038-9: RNCC: 3 | RNVC: 2

23 Oct 1989

3040-01-309-7522
A Cylinder Assembly

013097522
B-6600-D: RNCC: 3 | RNVC: 9
D-6600 W/B6600-D CAM: RNCC: 5 | RNVC: 2
D-6600 W/CAM: RNCC: 5 | RNVC: 9
D-6600: RNCC: 5 | RNVC: 9

22 Oct 1989

3040-01-309-5347
Straight Shaft

013095347
3174178-1: RNCC: 3 | RNVC: 2

19 Oct 1989

3040-01-309-4138
Control Cam

013094138
30001-2010: RNCC: 3 | RNVC: 2
30001-001 FIND 24: RNCC: 5 | RNVC: 9
30001-001: RNCC: D | RNVC: 9

18 Oct 1989

3040-01-308-7099
Rig Connecting Link

013087099
145CS340-1 77272: RNCC: 1 | RNVC: 2
145CS340-1: RNCC: 3 | RNVC: 2
89-1000-1: RNCC: 3 | RNVC: 9
145C2010-14: RNCC: E | RNVC: 8

3 Oct 1989

3040-01-308-7098
Rig Connecting Link

013087098
145CS340-17: RNCC: 3 | RNVC: 2
89-10000-17: RNCC: 3 | RNVC: 9
145CS340-17 77272: RNCC: 7 | RNVC: 2

3 Oct 1989

3040-01-308-4507
Rig Connecting Link

013084507
4080732: RNCC: 3 | RNVC: 2
4080732: RNCC: 5 | RNVC: 2
4070115-01: RNCC: 5 | RNVC: 2
4080711-01: RNCC: 5 | RNVC: 2
4080732: RNCC: 5 | RNVC: 2
4070115-01: RNCC: 5 | RNVC: 2
4080711-01: RNCC: 5 | RNVC: 2
3040PL0668219: RNCC: 6 | RNVC: 9

29 Sep 1989

3040-01-307-5485
Straight Shaft

013075485
558932: RNCC: 3 | RNVC: 2
558932: RNCC: 3 | RNVC: 9

13 Sep 1989

3040-01-307-2504
Shouldered Shaft

013072504
10029079-1: RNCC: 3 | RNVC: 2

8 Sep 1989

3040-01-306-6926
Shouldered Shaft

013066926
10029081: RNCC: 3 | RNVC: 2

29 Aug 1989

3040-01-304-0696
Straight Shaft

013040696
3046690: RNCC: 3 | RNVC: 2

11 Jul 1989

3040-01-302-7784
Piston Ring

013027784
425250-1: RNCC: 3 | RNVC: 2
425250-1: RNCC: 5 | RNVC: 2
425250-1: RNCC: 5 | RNVC: 9

20 Jun 1989

3040-01-302-4954
Threaded Cylinder Retainer

013024954
341997: RNCC: 3 | RNVC: 2
341997: RNCC: 5 | RNVC: 2

15 Jun 1989

3040-01-302-2492
Brake Band And Lini

013022492
453 8742 607: RNCC: 3 | RNVC: 2
453 8742-609: RNCC: 3 | RNVC: 2
126 270 16 62: RNCC: 3 | RNVC: 2
94211-991: RNCC: 3 | RNVC: 9
453872-609: RNCC: 5 | RNVC: 2
126 270 16 62: RNCC: 5 | RNVC: 9
94211-991: RNCC: 5 | RNVC: 9
4538742-609: RNCC: 5 | RNVC: 9
453872-609: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-301-8986
A Cylinder Assembly

013018986
1H2H0A00277297: RNCC: 3 | RNVC: 2
GG122908L0: RNCC: 5 | RNVC: 9

5 Jun 1989

3040-01-301-8075
Linear Actua Piston

013018075
1038Z385: RNCC: 3 | RNVC: 2

3 Jun 1989

3040-01-301-3037
Remote Contro Lever

013013037
1647370: RNCC: 3 | RNVC: 2
1647370: RNCC: 5 | RNVC: 9

26 May 1989

3040-01-301-2861
Rig Connecting Link

013012861
374536-7: RNCC: 3 | RNVC: 2
374536-7: RNCC: 5 | RNVC: 2
374536-7: RNCC: 5 | RNVC: 9

26 May 1989

3040-01-299-9891
A Cylinder Assembly

012999891
GG 123543C0: RNCC: 3 | RNVC: 2
GG12343C0: RNCC: 5 | RNVC: 9
1.5-CBB-2ALTS 14C X 8.125: RNCC: 5 | RNVC: 9

9 May 1989

3040-01-299-7095
Spur Gearshaft

012997095
803-5001004-XXXX-49: RNCC: 3 | RNVC: 2
5001004-49: RNCC: 3 | RNVC: 2
5001004-XXXX-33-48: RNCC: 5 | RNVC: 2

4 May 1989

3040-01-299-3955
Shouldered Shaft

012993955
8644618-01: RNCC: 3 | RNVC: 2
8644618-01: RNCC: 3 | RNVC: 9
8618-01: RNCC: 5 | RNVC: 9
8644618-01: RNCC: 5 | RNVC: 9
8644618-01: RNCC: 5 | RNVC: 9

30 Apr 1989

3040-01-299-2182
Rig Connecting Link

012992182
116214-3: RNCC: 3 | RNVC: 2

28 Apr 1989

3040-01-298-9017
Mechanical Housing

012989017
116069-5: RNCC: 3 | RNVC: 2

23 Apr 1989

3040-01-298-8932
Shouldered Shaft

012988932
10029136: RNCC: 3 | RNVC: 2

23 Apr 1989

3040-01-298-8918
Piston Ring

012988918
TF500A-429(600): RNCC: 3 | RNVC: 2
TF500A-429(600): RNCC: 5 | RNVC: 9
TF500A-429(600): RNCC: 5 | RNVC: 9

23 Apr 1989

3040-01-298-8816
Multiple Disk Brake

012988816
75800: RNCC: 3 | RNVC: 2
53120: RNCC: 5 | RNVC: 9

22 Apr 1989

3040-01-298-8643
Shouldered Shaft

012988643
NMP-1523 PIECE 34: RNCC: 3 | RNVC: 2
NMP-1523 PIECE 34: RNCC: 5 | RNVC: 9
NMP-1523 PIECE 34: RNCC: 5 | RNVC: 9

22 Apr 1989

3040-01-298-8634
Straight Shaft

012988634
36-155-090: RNCC: 3 | RNVC: 2
6455007624: RNCC: 5 | RNVC: 9
1 3/16DIA X 20: RNCC: C | RNVC: 1

22 Apr 1989

3040-01-298-6668
Hinge Bracket

012986668
5599810-1: RNCC: 3 | RNVC: 2
5599810-1: RNCC: 5 | RNVC: 2
5599810: RNCC: D | RNVC: 9

19 Apr 1989

3040-01-298-5742
Rotatin Eye Bracket

012985742
6532C132-3: RNCC: 3 | RNVC: 2
6532C132-3: RNCC: C | RNVC: 1

19 Apr 1989

3040-01-298-4496
Shouldered Shaft

012984496
10029074: RNCC: 3 | RNVC: 2
10029074: RNCC: 5 | RNVC: 2

16 Apr 1989

3040-01-298-2944
Linear Actuating Cylinder Assembly

012982944
AG144772C0: RNCC: 3 | RNVC: 2

14 Apr 1989

3040-01-297-9106
Linear Actuatin Cap

012979106
CEC4-5219-06: RNCC: 3 | RNVC: 2
CEC 5219-06: RNCC: 5 | RNVC: 9
CEC 5219: RNCC: 5 | RNVC: 9

8 Apr 1989

3040-01-297-7879
Body Hub

012977879
246656: RNCC: 3 | RNVC: 2

6 Apr 1989

3040-01-297-6895
Housing Adapter

012976895
8877766-01: RNCC: 3 | RNVC: 2
6099-4: RNCC: 5 | RNVC: 2
8877766-01: RNCC: 5 | RNVC: 9
8877766-01: RNCC: 5 | RNVC: 9

6 Apr 1989

3040-01-297-6579
Alternator. Shaft Assembly

012976579
5905691: RNCC: 3 | RNVC: 2
5905691: RNCC: 5 | RNVC: 2

5 Apr 1989

3040-01-297-5985
Shouldered Shaft

012975985
064-24520-000: RNCC: 3 | RNVC: 2
664-24520D: RNCC: 5 | RNVC: 9
664-24520-000: RNCC: 5 | RNVC: 9
064-24520D: RNCC: C | RNVC: 1

4 Apr 1989

3040-01-297-5616
Worm Whee Gearshaft

012975616
810210-50: RNCC: 3 | RNVC: 2
810210-50: RNCC: 5 | RNVC: 9
810210: RNCC: 5 | RNVC: 9
884010PL FIND 17: RNCC: D | RNVC: 9

4 Apr 1989

3040-01-297-5282
Receiver Connector Assembly

012975282
21070: RNCC: 3 | RNVC: 2

4 Apr 1989

3040-01-297-4540
Rigid Connecting Link

012974540
5598276-2: RNCC: 3 | RNVC: 2
5598276-2: RNCC: 5 | RNVC: 2
5598276-1: RNCC: 5 | RNVC: 9
5598276-1: RNCC: 5 | RNVC: 9

4 Apr 1989

3040-01-297-1414
Shouldered Shaft

012971414
DAA3222D341-001: RNCC: 3 | RNVC: 2
DAA3222D341-001: RNCC: 5 | RNVC: 2

29 Mar 1989

3040-01-295-5813
Shouldered Shaft

012955813
5497624-2: RNCC: 3 | RNVC: 2
5497624-2: RNCC: 5 | RNVC: 2
5497624-1: RNCC: 5 | RNVC: 9
5497624-1: RNCC: 5 | RNVC: 9
5497624: RNCC: D | RNVC: 9

9 Mar 1989

3040-01-294-7232
Straight Shaft

012947232
6601302: RNCC: 3 | RNVC: 2
6601302: RNCC: 5 | RNVC: 9

22 Feb 1989

3040-01-294-7231
Hub Clamp

012947231
5189738-002: RNCC: 3 | RNVC: 1
5186925-2: RNCC: 3 | RNVC: 2
5186925: RNCC: D | RNVC: 9

22 Feb 1989

3040-01-294-5917
Shouldered Shaft

012945917
14-18471-00: RNCC: 3 | RNVC: 2
15-51037-01 ITEM 9-121: RNCC: 5 | RNVC: 9
14-18471-00: RNCC: 5 | RNVC: 9
15-51037-01: RNCC: D | RNVC: 9

18 Feb 1989

3040-01-293-8548
Shouldered Shaft

012938548
6607513: RNCC: 3 | RNVC: 2
6607513: RNCC: 5 | RNVC: 9

8 Feb 1989

3040-01-293-6868
Tie-Rod End

012936868
A1-3144-Q-1005: RNCC: 3 | RNVC: 2

3 Feb 1989

3040-01-293-6061
Rigid Connecting Link

012936061
12358607: RNCC: 3 | RNVC: 2
12358607: RNCC: 3 | RNVC: 2
12358607: RNCC: 5 | RNVC: 2

3 Feb 1989

3040-01-293-6040
Mechanical Housing

012936040
D36973: RNCC: 3 | RNVC: 2
36973: RNCC: 5 | RNVC: 2

3 Feb 1989

3040-01-293-1850
Brake Disc

012931850
H070280-002: RNCC: 3 | RNVC: 2
H-70280-1: RNCC: 5 | RNVC: 9
H70280-2: RNCC: 5 | RNVC: 9

28 Jan 1989

3040-01-293-1248
Mechanical Housing

012931248
C5A205490: RNCC: 3 | RNVC: 2
C5A205490: RNCC: 5 | RNVC: 9

26 Jan 1989

3040-01-291-1290
Slide Ring

012911290
3-0406/5221/0: RNCC: 3 | RNVC: 2
3-0406/5221/0: RNCC: 5 | RNVC: 2
4-1705/3020/0 PC-13: RNCC: 5 | RNVC: 2
3-0406/5221/0: RNCC: 5 | RNVC: 9

24 Dec 1988

3040-01-290-9284
Actuating Cylinder

012909284
AG158691B: RNCC: 3 | RNVC: 2
4CBC2HLTS 24X46: RNCC: C | RNVC: 1

19 Dec 1988

3040-01-290-1436
Hose Reel Brake Wheel Assembly

012901436
9914.0210: RNCC: 3 | RNVC: 2
IS0-35-13: RNCC: 5 | RNVC: 9

7 Dec 1988

3040-01-290-1083
Control Cam

012901083
104B5003-1: RNCC: 3 | RNVC: 2
104B5005-1: RNCC: 5 | RNVC: 9
104B5005: RNCC: D | RNVC: 9

6 Dec 1988

3040-01-289-5381
Manual Contro Lever

012895381
3823609: RNCC: 3 | RNVC: 2
ST-1193: RNCC: 5 | RNVC: 9

25 Nov 1988

3040-01-288-0420
Remote Contro Lever

012880420
11450121-1: RNCC: 3 | RNVC: 2
11450121-1: RNCC: 5 | RNVC: 2

1 Nov 1988

3040-01-287-9131
Shouldered Shaft

012879131
481-200417: RNCC: 3 | RNVC: 2
481-200417: RNCC: 5 | RNVC: 2
481-200417: RNCC: 5 | RNVC: 9

29 Oct 1988

3040-01-287-7906
Actuating Cylinder

012877906
JV-94B2N-02.00-5.000-0100-N11-0: RNCC: 3 | RNVC: 2
JV-94B2N-02.00-5.000-0100-N11-0: RNCC: 3 | RNVC: 9
STC90868-61: RNCC: 5 | RNVC: 2
SRMHY90B2N-2-5-1-3000-DA: RNCC: 5 | RNVC: 9

27 Oct 1988

3040-01-286-0316
Bevel Gearshaft

012860316
9C8204: RNCC: 3 | RNVC: 2

24 Sep 1988

3040-01-286-0263
Straight Shaft

012860263
8V1612: RNCC: 3 | RNVC: 2

24 Sep 1988

3040-01-285-7307
Remote Control Lever

012857307
8V1613: RNCC: 3 | RNVC: 2

20 Sep 1988

3040-01-285-6399
Pawl

012856399
116086-1: RNCC: 3 | RNVC: 2

17 Sep 1988

3040-01-285-6330
Rig Connecting Link

012856330
289335-103: RNCC: 3 | RNVC: 2
289335-103: RNCC: 5 | RNVC: 1

17 Sep 1988

3040-01-285-3112
Pawl

012853112
116286-1: RNCC: 3 | RNVC: 2

10 Sep 1988

3040-01-285-3111
Bell Crank

012853111
116227-5: RNCC: 3 | RNVC: 2
116227-1: RNCC: 5 | RNVC: 9

10 Sep 1988

3040-01-285-2274
Pawl

012852274
116094-1: RNCC: 3 | RNVC: 2

9 Sep 1988

3040-01-285-2245
Control Cam

012852245
116280-2: RNCC: 3 | RNVC: 2
116280-6: RNCC: 5 | RNVC: 9

8 Sep 1988

3040-01-285-1305
Flexible Shaft Core

012851305
29494-1: RNCC: 3 | RNVC: 2

7 Sep 1988

3040-01-285-1278
Manual Contro Lever

012851278
116288-1: RNCC: 3 | RNVC: 2

7 Sep 1988

3040-01-284-8745
Linear Actuating Cylinder Assembly

012848745
399-8579: RNCC: 3 | RNVC: 2
4T9290: RNCC: 5 | RNVC: 9

2 Sep 1988

3040-01-284-6931
Helix Cab Connector

012846931
57357-02: RNCC: 3 | RNVC: 2
57357-2: RNCC: 5 | RNVC: 2
POD-57357-2: RNCC: 5 | RNVC: 2

29 Aug 1988

3040-01-284-6224
Shoe Type Brake

012846224
507229: RNCC: 3 | RNVC: 2
536292: RNCC: 3 | RNVC: 2
507229: RNCC: 5 | RNVC: 9
536292: RNCC: 5 | RNVC: 9

26 Aug 1988

3040-01-284-5940
Friction Lining

012845940
5B1-04404: RNCC: 3 | RNVC: 2
503-02095 PC26: RNCC: 5 | RNVC: 2

26 Aug 1988

3040-01-284-5405
Mechanical Housing

012845405
219F616: RNCC: 3 | RNVC: 2

25 Aug 1988

3040-01-284-5391
Control Cam

012845391
116280-1: RNCC: 3 | RNVC: 2
116280-5: RNCC: 5 | RNVC: 9

25 Aug 1988

3040-01-284-2657
Bell Crank Support

012842657
145S1864-3: RNCC: 3 | RNVC: 2
145S1873-1: RNCC: 5 | RNVC: 9

20 Aug 1988

3040-01-284-2080
Worm Shaft

012842080
2125-3420-010: RNCC: 3 | RNVC: 2
2125-3420-010: RNCC: 5 | RNVC: 2
2125-3420-010: RNCC: 5 | RNVC: 9

19 Aug 1988

3040-01-283-6771
Shouldered Shaft

012836771
40003830: RNCC: 3 | RNVC: 2
40003830: RNCC: 5 | RNVC: 9

11 Aug 1988

3040-01-283-5978
Linear Actuating Cylinder Asse Parts Kit

012835978
RD-1610K2: RNCC: 3 | RNVC: 2

9 Aug 1988

3040-01-283-3575
Hydraul Accumulator

012833575
BA050B3T01P2: RNCC: 3 | RNVC: 2
BA05B3T01A1: RNCC: 5 | RNVC: 9
AB20B3T1A1: RNCC: 5 | RNVC: 9

3 Aug 1988

3040-01-283-2008
Linear A Piston Rod

012832008
12427761: RNCC: 3 | RNVC: 2
12427761: RNCC: 3 | RNVC: 9
9230B: RNCC: 5 | RNVC: 2
9230B: RNCC: 5 | RNVC: 9
12427761: RNCC: 5 | RNVC: 9
9230B: RNCC: 5 | RNVC: 9
9230B: RNCC: 5 | RNVC: 9

30 Jul 1988

3040-01-282-8757
Control Cam

012828757
116296-1: RNCC: 3 | RNVC: 2
116296-6: RNCC: 5 | RNVC: 2

23 Jul 1988

3040-01-282-7002
Mechanical Drive Housing

012827002
12354105-1: RNCC: 3 | RNVC: 2
MIOWH100-1: RNCC: 5 | RNVC: 2
12354105: RNCC: D | RNVC: 9

21 Jul 1988

3040-01-282-6475
Linear Actuating Cylinder Assembly

012826475
00241-0150: RNCC: 3 | RNVC: 2
50053801: RNCC: 5 | RNVC: 2
00241-0150: RNCC: 5 | RNVC: 9
00241-0150: RNCC: 5 | RNVC: 9
1366AS1005: RNCC: 7 | RNVC: 2

20 Jul 1988

3040-01-282-4179
Shouldered Shaft

012824179
EJ21247: RNCC: 3 | RNVC: 2
EJ41136: RNCC: D | RNVC: 9

15 Jul 1988

3040-01-281-8608
A Cylinder Assembly

012818608
15727-000-00: RNCC: 3 | RNVC: 9
15727-000-00: RNCC: 5 | RNVC: 9

3 Jul 1988

3040-01-281-7910
Straight Shaft

012817910
312-1133-001: RNCC: 3 | RNVC: 2
312-1133-001: RNCC: 3 | RNVC: 2
9722100847: RNCC: 5 | RNVC: 2
9722100847: RNCC: 5 | RNVC: 2
9722100847: RNCC: 5 | RNVC: 2
2GK349: RNCC: 5 | RNVC: 2
2GK349: RNCC: 5 | RNVC: 9
321-1135-001: RNCC: 5 | RNVC: 9
321-1133-001: RNCC: 5 | RNVC: 9
321-1135-001: RNCC: 5 | RNVC: 9

1 Jul 1988

3040-01-281-5918
Brake Shoe

012815918
898-071-715: RNCC: 3 | RNVC: 2
898-071-715: RNCC: 5 | RNVC: 9

28 Jun 1988

3040-01-281-5428
Rig Connecting Link

012815428
116300-1: RNCC: 3 | RNVC: 2

25 Jun 1988

3040-01-280-8229
Straight Shaft

012808229
DGC000-92902584: RNCC: 3 | RNVC: 2
11-39MIL3-2006-15: RNCC: 5 | RNVC: 2

13 Jun 1988

3040-01-280-8228
Straight Shaft

012808228
DGB000-92903584: RNCC: 3 | RNVC: 2
5-39MIL3-1606-15: RNCC: 5 | RNVC: 2

13 Jun 1988

3040-01-280-4357
Pu Control Assembly

012804357
CCX63336: RNCC: 3 | RNVC: 2
301947-003-32: RNCC: 5 | RNVC: 9
301947-003-36: RNCC: 5 | RNVC: 9
301947-003-36: RNCC: 5 | RNVC: 9

9 Jun 1988

3040-01-280-4156
Pawl

012804156
2HR542: RNCC: 1 | RNVC: 2
940001373A01: RNCC: 3 | RNVC: 2
A-3280-V-8186: RNCC: 5 | RNVC: 2
A-3280-V-8186: RNCC: 5 | RNVC: 9
A-2297-U-5351: RNCC: 5 | RNVC: 9
2HR542: RNCC: 5 | RNVC: 9

9 Jun 1988

3040-01-280-4111
Straight Shaft

012804111
R59686: RNCC: 3 | RNVC: 2
R59686P1: RNCC: 3 | RNVC: 2
R59686: RNCC: 5 | RNVC: 9
R59686P1: RNCC: 5 | RNVC: 9
R59686P1: RNCC: 5 | RNVC: 9
R59686: RNCC: 5 | RNVC: 9
R59686P1: RNCC: 5 | RNVC: 9
R59686: RNCC: 5 | RNVC: 9

9 Jun 1988

3040-01-279-5114
Friction Lining

012795114
2A1-750-4: RNCC: 3 | RNVC: 2

20 May 1988

3040-01-279-0238
Shouldered Shaft

012790238
61-409-0136-2: RNCC: 3 | RNVC: 2
01-435-0366-4 PIECE 39: RNCC: 5 | RNVC: 2
01-435-0366-4: RNCC: D | RNVC: 9

12 May 1988

3040-01-277-6549
A Cylinder Assembly

012776549
1H000168924: RNCC: 3 | RNVC: 2
GG113132A0: RNCC: 5 | RNVC: 2
5.00CCVHLTS44ACX54.500: RNCC: 5 | RNVC: 9

25 Apr 1988

3040-01-277-0307
Hydraul Accumulator

012770307
853560: RNCC: 3 | RNVC: 2
A15N5775X10E: RNCC: 5 | RNVC: 2

16 Apr 1988

3040-01-276-6966
Shouldered Shaft

012766966
006-SND-002-300: RNCC: 3 | RNVC: 2
D-006-SND-0-02-320: RNCC: 5 | RNVC: 2
006-SND-200-320: RNCC: 5 | RNVC: 2

12 Apr 1988

3040-01-276-5978
Linear Actuating Cylinder Assembly

012765978
P-860266: RNCC: 3 | RNVC: 2

10 Apr 1988

3040-01-276-5017
Shouldered Shaft

012765017
388661: RNCC: 3 | RNVC: 9
388661: RNCC: 5 | RNVC: 2
388661: RNCC: 5 | RNVC: 9
388661: RNCC: 5 | RNVC: 9
388661: RNCC: 5 | RNVC: 9

9 Apr 1988

3040-01-275-9601
Bushing Stave

012759601
5950265: RNCC: 3 | RNVC: 2
518-4457077 ITEM 30: RNCC: 5 | RNVC: 2
2010-121 ITEM 30: RNCC: 5 | RNVC: 9
518-4457077: RNCC: D | RNVC: 9

30 Mar 1988

3040-01-275-9142
Shouldered Shaft

012759142
7-0010-01: RNCC: 3 | RNVC: 2
NA1037-000: RNCC: 3 | RNVC: 9
NA1037: RNCC: C | RNVC: 1

29 Mar 1988

3040-01-275-2512
Brake Disc

012752512
K090107-001: RNCC: 3 | RNVC: 2

19 Mar 1988

3040-01-275-2511
Brake Disc

012752511
K090122-001: RNCC: 3 | RNVC: 2

19 Mar 1988

3040-01-274-9944
Clutch Shoe

012749944
S24014: RNCC: 3 | RNVC: 2

17 Mar 1988

3040-01-273-5615
Shouldered Shaft

012735615
2B1-2395: RNCC: 3 | RNVC: 2
2B1-2395: RNCC: 5 | RNVC: 9
2D3-990 ITEM 17: RNCC: C | RNVC: 1
2D3-990 PC 17: RNCC: C | RNVC: 1

26 Feb 1988

3040-01-273-3205
Shaft Collar

012733205
R59688P1T1: RNCC: 3 | RNVC: 2
R59688P1T1: RNCC: 3 | RNVC: 9
R59688P1T1: RNCC: 5 | RNVC: 9
R59688P1T1: RNCC: 5 | RNVC: 9

24 Feb 1988

3040-01-271-3822
Remote Contro Lever

012713822
1310194: RNCC: 3 | RNVC: 2

23 Jan 1988

3040-01-270-8570
Shouldered Shaft

012708570
NL1117-1: RNCC: 3 | RNVC: 2
NL1117-1: RNCC: 5 | RNVC: 9
NL-1117: RNCC: 5 | RNVC: 9
NL-1117: RNCC: 5 | RNVC: 9
S-1097 PIECE 56: RNCC: 5 | RNVC: 9
S-1097: RNCC: D | RNVC: 9

14 Jan 1988

3040-01-270-6446
Shouldered Shaft

012706446
T001224299PR: RNCC: 3 | RNVC: 2
T001224299: RNCC: 3 | RNVC: 9
T001224299: RNCC: 5 | RNVC: 9
413169 ITEM 17: RNCC: 5 | RNVC: 9
1-224299: RNCC: 5 | RNVC: 9

11 Jan 1988

3040-01-270-5733
Flexible Shaft Assembly

012705733
4C92005-101A: RNCC: 3 | RNVC: 2
FAUSG11TZ1: RNCC: 5 | RNVC: 2
18599Y-35: RNCC: 5 | RNVC: 9
18599Y-35: RNCC: 5 | RNVC: 9

9 Jan 1988

3040-01-270-5695
Carrier Assembly

012705695
M2132-101: RNCC: 3 | RNVC: 2
P002059: RNCC: 5 | RNVC: 2
M2132-101: RNCC: 5 | RNVC: 9
M2132-101: RNCC: 5 | RNVC: 9
M2132-101: RNCC: 5 | RNVC: 9

9 Jan 1988

3040-01-270-4964
Brake Shoe

012704964
90-29A: RNCC: 3 | RNVC: 9

7 Jan 1988

3040-01-269-9432
Shouldered Shaft

012699432
006-SND-001-300: RNCC: 3 | RNVC: 2
D-006-SND-0-01-320: RNCC: 5 | RNVC: 9

24 Dec 1987

3040-01-269-7935
Shouldered Shaft

012697935
3249412: RNCC: 3 | RNVC: 2
3249412: RNCC: 5 | RNVC: 2

22 Dec 1987

3040-01-269-6602
Straight Shaft

012696602
709 1554: RNCC: 3 | RNVC: 2
709 1554: RNCC: 5 | RNVC: 9

18 Dec 1987

3040-01-269-3801
Rigid Connecting Link

012693801
6-705-004988: RNCC: 3 | RNVC: 9
6-705-004988: RNCC: 5 | RNVC: 2
B6-705-004988: RNCC: D | RNVC: 9

15 Dec 1987

3040-01-269-2776
Linear Actua Piston

012692776
5210081: RNCC: 3 | RNVC: 2
5210069 PART 9: RNCC: 5 | RNVC: 2
521069 PIECE 9: RNCC: 5 | RNVC: 9

14 Dec 1987

3040-01-269-1603
Shouldered Shaft

012691603
5906116: RNCC: 3 | RNVC: 2
5906116: RNCC: 5 | RNVC: 2
5906116: RNCC: 5 | RNVC: 9

12 Dec 1987

3040-01-268-7812
Linear Actuating Cylinder

012687812
5210069 PIECE 8: RNCC: 3 | RNVC: 9
5210069 PART 8: RNCC: 5 | RNVC: 2
5210079: RNCC: 5 | RNVC: 9

7 Dec 1987

3040-01-268-3559
Linear Actuating Cylinder

012683559
4-100-09814: RNCC: 3 | RNVC: 2
4-100-09814: RNCC: 5 | RNVC: 2
7967041: RNCC: 5 | RNVC: 9

28 Nov 1987

3040-01-267-4283
Shaft Collar

012674283
RK-T-61: RNCC: 3 | RNVC: 2
XA-T-61-SR: RNCC: 5 | RNVC: 9
14067788: RNCC: D | RNVC: 9

11 Nov 1987

3040-01-267-2571
Remote Contro Lever

012672571
12350989: RNCC: 3 | RNVC: 2
12350989: RNCC: 5 | RNVC: 2
12350989: RNCC: 5 | RNVC: 2

7 Nov 1987

3040-01-267-2085
Linear Actuating Cylinder Piston Rod

012672085
7J3338: RNCC: 3 | RNVC: 2

6 Nov 1987

3040-01-267-2084
Linear Actua Piston

012672084
6J9748: RNCC: 3 | RNVC: 2

6 Nov 1987

3040-01-267-2079
Mechanical Housing

012672079
3P5802: RNCC: 3 | RNVC: 2

6 Nov 1987

3040-01-267-1390
Remote Contro Lever

012671390
12351136: RNCC: 3 | RNVC: 2
12351136: RNCC: 3 | RNVC: 2
12351136: RNCC: 5 | RNVC: 2

5 Nov 1987

3040-01-267-0625
Rig Connecting Link

012670625
6J5359: RNCC: 3 | RNVC: 2

4 Nov 1987

3040-01-267-0143
Friction Lining

012670143
9630235: RNCC: 3 | RNVC: 2
9630235: RNCC: 5 | RNVC: 2
9630235: RNCC: 5 | RNVC: 9
9630235: RNCC: 5 | RNVC: 9
9630235: RNCC: 5 | RNVC: 9

4 Nov 1987

3040-01-266-6868
Linear Actuating Cylinder

012666868
2B1-2426: RNCC: 3 | RNVC: 2

30 Oct 1987

3040-01-266-2095
Linear Actuating Cylinder Asse Parts Kit

012662095
N5-665-11V: RNCC: 3 | RNVC: 2
22473N PIECE 16: RNCC: 5 | RNVC: 9
N-661-11-V: RNCC: 5 | RNVC: 9
NS-66S: RNCC: 5 | RNVC: 9
N5-665-1VV: RNCC: 5 | RNVC: 9

22 Oct 1987

3040-01-266-1771
Manual Contro Lever

012661771
133041: RNCC: 3 | RNVC: 2
12211771: RNCC: 5 | RNVC: 2

21 Oct 1987

3040-01-266-1004
Rig Connecting Link

012661004
65662-03402-052: RNCC: 3 | RNVC: 2

20 Oct 1987

3040-01-265-8605
Remote Contro Lever

012658605
A83387-1: RNCC: 3 | RNVC: 2
A83387-1: RNCC: 5 | RNVC: 9

17 Oct 1987

3040-01-264-9338
A Cylinder Assembly

012649338
P-84444: RNCC: 3 | RNVC: 2
PD41047-500: RNCC: 5 | RNVC: 2

8 Oct 1987

3040-01-263-9518
Hose Reel Brake Wheel Assembly

012639518
T001312974: RNCC: 3 | RNVC: 2
312974: RNCC: 3 | RNVC: 9
413112-2 ITEM 23: RNCC: 5 | RNVC: 9
T001312974: RNCC: 5 | RNVC: 9
T000312974001: RNCC: 5 | RNVC: 9
312974-1: RNCC: 5 | RNVC: 9
MB-85: RNCC: 5 | RNVC: 9
312974-1: RNCC: C | RNVC: 1
413112-2: RNCC: D | RNVC: 9

22 Sep 1987

3040-01-263-0082
Bell Crank

012630082
353164: RNCC: 3 | RNVC: 2
353164: RNCC: 5 | RNVC: 9

9 Sep 1987

3040-01-262-8440
Linear Actuating Cylinder Assembly

012628440
7P30600B29624: RNCC: 3 | RNVC: 2
577L913-002: RNCC: 5 | RNVC: 9
577L913-002: RNCC: 5 | RNVC: 9
577L913-002: RNCC: 5 | RNVC: 9
546053: RNCC: C | RNVC: 1
546053: RNCC: C | RNVC: 1
577L913: RNCC: D | RNVC: 9

4 Sep 1987

3040-01-262-8439
Linear Actuating Cylinder Assembly

012628439
7P30600B29623: RNCC: 3 | RNVC: 2
577L913-001: RNCC: 5 | RNVC: 2
577L913-001: RNCC: 5 | RNVC: 9
545950: RNCC: C | RNVC: 1
577L913: RNCC: D | RNVC: 9

4 Sep 1987

3040-01-262-7595
Linear Actuating Cylinder Asse Parts Kit

012627595
1501412: RNCC: 3 | RNVC: 2
1310390: RNCC: 5 | RNVC: 9
355696: RNCC: 5 | RNVC: 9

3 Sep 1987

3040-01-262-5537
Shouldered Shaft

012625537
2022976-6-2: RNCC: 3 | RNVC: 2
2022976-6-2W: RNCC: 5 | RNVC: 2
2022976-6-1: RNCC: 5 | RNVC: 9
2022976-6-1: RNCC: 5 | RNVC: 9
3040PL0668162: RNCC: 6 | RNVC: 9
3040PL1601322: RNCC: 6 | RNVC: 9

31 Aug 1987

3040-01-261-9806
Linear Actuating Cylinder Assembly

012619806
61530-064047: RNCC: 3 | RNVC: 2
709 1004: RNCC: 5 | RNVC: 2

20 Aug 1987

3040-01-261-0246
Linear Actuating Cylinder Assembly

012610246
58524600-1: RNCC: 3 | RNVC: 2
P-85246-1: RNCC: 3 | RNVC: 9
P-85246: RNCC: D | RNVC: 9

7 Aug 1987

3040-01-260-4337
Coupling Plate

012604337
847412: RNCC: 3 | RNVC: 2

31 Jul 1987

3040-01-259-7388
Coupling

012597388
847411: RNCC: 3 | RNVC: 2

22 Jul 1987

3040-01-258-6760
Shouldered Shaft

012586760
5746902: RNCC: 3 | RNVC: 2
5746889 PIECE 6: RNCC: 5 | RNVC: 2
5746902: RNCC: C | RNVC: 1
5746889: RNCC: D | RNVC: 9

6 Jul 1987

3040-01-258-1158
Rig Connecting Link

012581158
7603-0003: RNCC: 3 | RNVC: 2
SR12211A3: RNCC: 5 | RNVC: 2
LE162-0071-0003: RNCC: 7 | RNVC: 2

27 Jun 1987

3040-01-257-8553
A Cylinder Assembly

012578553
H1489B: RNCC: 3 | RNVC: 2
PH-1489B: RNCC: 5 | RNVC: 9
0491D0005: RNCC: C | RNVC: 1

25 Jun 1987

3040-01-257-8545
Brake Backing Plate

012578545
8-076-206-00: RNCC: 3 | RNVC: 2
8-076-206: RNCC: 5 | RNVC: 9

25 Jun 1987

3040-01-256-7953
Rig Connecting Link

012567953
214-010-715-105: RNCC: 3 | RNVC: 2
HSLK4-6: RNCC: 3 | RNVC: 2
AMSCBDOC: RNCC: 5 | RNVC: 2
HSLK4-8: RNCC: 5 | RNVC: 9
214-010-715: RNCC: D | RNVC: 9

9 Jun 1987

3040-01-256-5338
Flexible Access Kit

012565338
57717-00: RNCC: 3 | RNVC: 2
40042593: RNCC: 5 | RNVC: 2
RMOP0130: RNCC: 5 | RNVC: 2
57717: RNCC: 5 | RNVC: 9
P0D-57717: RNCC: D | RNVC: 9

5 Jun 1987

3040-01-256-3718
Flexible Shaft Assembly Core

012563718
57353-00 450FT: RNCC: 3 | RNVC: 2
57353-450: RNCC: 5 | RNVC: 2

4 Jun 1987

3040-01-256-3717
Flexible Shaft Core

012563717
57353-400: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-3715
Flexible Shaft Core

012563715
57353-300: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-3714
Flexible Shaft Assembly Core

012563714
57353-00 QTY 250 FT: RNCC: 3 | RNVC: 2
57353-250: RNCC: 5 | RNVC: 9

4 Jun 1987

3040-01-256-3713
Flexible Shaft Assembly Core

012563713
57353-00 QTY 200 FT: RNCC: 3 | RNVC: 2
57353-200: RNCC: 5 | RNVC: 9

4 Jun 1987

3040-01-256-3712
Flexible Shaft Assembly Core

012563712
57353-150: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-3710
Flexible Shaft Core

012563710
57353-80: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-3709
Flexible Shaft Assembly Core

012563709
57353-60: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-3708
Flexible Shaft Assembly Core

012563708
57353-40: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-2258
Flex Shaft Assembly

012562258
57714-05: RNCC: 3 | RNVC: 2
57714-5: RNCC: 5 | RNVC: 9

3 Jun 1987

3040-01-256-0342
Flexible Sha Casing

012560342
57350-3FT0IN: RNCC: 3 | RNVC: 2
57795-3: RNCC: 5 | RNVC: 9

30 May 1987

3040-01-255-2176
Rod Assembly

012552176
7-211525602: RNCC: 1 | RNVC: 2
7-211525602-3: RNCC: 3 | RNVC: 2
A-AH64005-103: RNCC: 3 | RNVC: 2
7-211525602-3: RNCC: 3 | RNVC: 9
USCAAH009-3: RNCC: 5 | RNVC: 2
6033-3: RNCC: 5 | RNVC: 9

16 May 1987

3040-01-255-1604
Bell Crank

012551604
209-064-720-101: RNCC: 3 | RNVC: 2
209-064-720: RNCC: D | RNVC: 9

15 May 1987

NSN 3040-01-255-0950 012550950 BRACKET,EYE,ROTATING SHAFT

3040-01-255-0950
Rotating Shaft Eye Bracket

012550950
23501136: RNCC: 3 | RNVC: 2
8925276: RNCC: 5 | RNVC: 9
8925276-ND: RNCC: 5 | RNVC: 9

15 May 1987

3040-01-254-5618
Flex Shaft Assembly

012545618
9467: RNCC: 3 | RNVC: 2
197C7440: RNCC: 3 | RNVC: 2
031217507X01500: RNCC: 5 | RNVC: 2
FAUSG12WX1: RNCC: 5 | RNVC: 2
17507X: RNCC: 5 | RNVC: 9
S22321-801: RNCC: 5 | RNVC: 9
22321-801: RNCC: 5 | RNVC: 9
17507X: RNCC: 5 | RNVC: 9

7 May 1987

3040-01-254-1273
Manual Contro Lever

012541273
T22150: RNCC: 3 | RNVC: 2
T22150: RNCC: 5 | RNVC: 9

1 May 1987

3040-01-254-0311
Rig Connecting Link

012540311
7S2666: RNCC: 3 | RNVC: 2

29 Apr 1987

3040-01-253-8694
Rig Connecting Link

012538694
68A500076-1001: RNCC: 3 | RNVC: 2
68A500076-1001: RNCC: 5 | RNVC: 2
68A500076-1001: RNCC: 5 | RNVC: 2
68A500076-1001: RNCC: 5 | RNVC: 9
68A500076: RNCC: D | RNVC: 9

26 Apr 1987

3040-01-253-7459
Rig Connecting Link

012537459
7G2926: RNCC: 3 | RNVC: 2

24 Apr 1987

3040-01-253-7452
Rotatin Eye Bracket

012537452
RYLC 366: RNCC: 3 | RNVC: 2

24 Apr 1987

3040-01-253-5584
Remote Contro Lever

012535584
5R7003: RNCC: 3 | RNVC: 2
5R8545: RNCC: 5 | RNVC: 9

21 Apr 1987

3040-01-253-5583
Remote Control Lever

012535583
8P4925: RNCC: 3 | RNVC: 2

21 Apr 1987

3040-01-253-4699
Remote Contro Lever

012534699
2P3980: RNCC: 3 | RNVC: 2

18 Apr 1987

3040-01-253-3470
Manual Control Lever

012533470
3P7651: RNCC: 3 | RNVC: 2

17 Apr 1987

3040-01-252-8347
Propelle Shaft Shoe

012528347
660509218: RNCC: 3 | RNVC: 2
660509218: RNCC: 5 | RNVC: 2
660509218: RNCC: 5 | RNVC: 2

8 Apr 1987

3040-01-252-7689
Rigid Connecting Link

012527689
212-030-104-101: RNCC: 3 | RNVC: 2

8 Apr 1987

3040-01-252-3799
Brake Band And Lini

012523799
5210252: RNCC: 3 | RNVC: 2
5210252: RNCC: 5 | RNVC: 2

1 Apr 1987

3040-01-252-3798
Brake Band And Lini

012523798
5210331: RNCC: 3 | RNVC: 2
5210331: RNCC: 5 | RNVC: 2
35545375B0331: RNCC: 5 | RNVC: 2
5210331: RNCC: 5 | RNVC: 2
5210331: RNCC: 5 | RNVC: 9

1 Apr 1987

3040-01-251-9858
Disk Brake Shoe

012519858
507747: RNCC: 3 | RNVC: 2

27 Mar 1987

3040-01-251-8895
Mechanical Housing

012518895
102655DF: RNCC: 3 | RNVC: 2

25 Mar 1987

3040-01-251-8470
Bevel Gearshaft

012518470
4068119: RNCC: 3 | RNVC: 2
4068119: RNCC: 5 | RNVC: 2
3040PL0667925: RNCC: 6 | RNVC: 9

25 Mar 1987

3040-01-251-1710
Shouldered Shaft

012511710
87692-1816 ITEM 15: RNCC: 3 | RNVC: 2
711-4863675 ITEM 15: RNCC: 5 | RNVC: 2
711-4863675: RNCC: D | RNVC: 9
87692-1816: RNCC: D | RNVC: 9

14 Mar 1987

3040-01-251-1707
Shaft Collar

012511707
2SSC50: RNCC: 3 | RNVC: 2

14 Mar 1987

3040-01-250-1327
A Cylinder Assembly

012501327
9377597: RNCC: 3 | RNVC: 2
TF17DAXX3AAAB312: RNCC: 5 | RNVC: 2
7600719-A: RNCC: 6 | RNVC: 9

26 Feb 1987

3040-01-249-1517
Rig Connecting Link

012491517
12349739: RNCC: 3 | RNVC: 2
12349739: RNCC: 5 | RNVC: 2
12349739: RNCC: 5 | RNVC: 2
12349739: RNCC: 8 | RNVC: 1

6 Feb 1987

3040-01-249-1515
Rig Connecting Link

012491515
4501-271-G: RNCC: 3 | RNVC: 2
4501-271: RNCC: 3 | RNVC: 9
4501-271-M: RNCC: 5 | RNVC: 9
68B418000-271: RNCC: 5 | RNVC: 9
68B418000-271: RNCC: 5 | RNVC: 9
68B418000: RNCC: D | RNVC: 9

6 Feb 1987

3040-01-248-6993
Manual Contro Lever

012486993
24-4597-5: RNCC: 3 | RNVC: 2

30 Jan 1987

3040-01-248-6422
Sliding Shoe

012486422
558: RNCC: 3 | RNVC: 2
AW 6196 ITEM 24: RNCC: 5 | RNVC: 2
AW 6196/24: RNCC: 5 | RNVC: 2
BW7224 ITEM 12: RNCC: 5 | RNVC: 2
558PB: RNCC: C | RNVC: 1

28 Jan 1987

3040-01-248-3727
Remote Contro Lever

012483727
5-32-7004-00: RNCC: 3 | RNVC: 2
5-32-7004: RNCC: 5 | RNVC: 9
55-28-7009: RNCC: C | RNVC: 1

23 Jan 1987

3040-01-248-3726
Remote Contro Lever

012483726
8-017-703-03: RNCC: 3 | RNVC: 2
8-017-703-3: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-248-1501
Shouldered Shaft

012481501
N62373: RNCC: 3 | RNVC: 2
62373: RNCC: 5 | RNVC: 9

16 Jan 1987

3040-01-247-3671
Rotatin Eye Bracket

012473671
10063075-102: RNCC: 3 | RNVC: 2
10063075-102: RNCC: 5 | RNVC: 9

4 Jan 1987

3040-01-247-3283
Body Hub

012473283
60-7658-05: RNCC: 3 | RNVC: 2
60-6594-05: RNCC: 5 | RNVC: 9

31 Dec 1986

3040-01-247-0893
Shouldered Shaft

012470893
29546: RNCC: 3 | RNVC: 2
01-247-0893: RNCC: 5 | RNVC: 2
26538: RNCC: 5 | RNVC: 9
27375: RNCC: 5 | RNVC: 9
62538: RNCC: 5 | RNVC: 9
01-247-0893: RNCC: 5 | RNVC: 9

24 Dec 1986

3040-01-246-7144
Worm Shaft

012467144
742848: RNCC: 3 | RNVC: 2

18 Dec 1986

3040-01-246-5938
A Cylinder Assembly

012465938
52B10143-1: RNCC: 3 | RNVC: 2
3.25-DD2HLT39A-22.00: RNCC: 5 | RNVC: 2
3040PL0828037: RNCC: 6 | RNVC: 9

16 Dec 1986

3040-01-246-1637
Multiple Gearshaft

012461637
742807: RNCC: 3 | RNVC: 2

10 Dec 1986

3040-01-245-0244
Rig Connecting Link

012450244
7-311660015-21: RNCC: 3 | RNVC: 2
7-311660015-21: RNCC: 5 | RNVC: 9

23 Nov 1986

3040-01-243-7715
Shouldered Shaft

012437715
7360 029 307: RNCC: 3 | RNVC: 2
7360 029 307: RNCC: 5 | RNVC: 2
406 462 00 12: RNCC: 5 | RNVC: 2
406 462 00 12: RNCC: 5 | RNVC: 9

31 Oct 1986

3040-01-242-2930
Shaft Collar

012422930
3A001-1871: RNCC: 3 | RNVC: 2
3A001-1871: RNCC: 5 | RNVC: 2

9 Oct 1986

3040-01-241-7449
Rig Connecting Link

012417449
70219-42410-045: RNCC: 3 | RNVC: 2

1 Oct 1986

3040-01-241-4818
Shaft Retaining Plate

012414818
M12WHR50-L: RNCC: 3 | RNVC: 9
M10WH100-1: RNCC: 5 | RNVC: 9
M10WH100: RNCC: D | RNVC: 9

26 Sep 1986

3040-01-240-5707
Bell Crank

012405707
65415-11351-043: RNCC: 3 | RNVC: 2

15 Sep 1986

3040-01-240-3567
Multiple Gearshaft

012403567
801337: RNCC: 3 | RNVC: 2
801337: RNCC: 5 | RNVC: 2
801337: RNCC: 5 | RNVC: 2
801337: RNCC: 5 | RNVC: 9
801337: RNCC: 5 | RNVC: 9

12 Sep 1986

3040-01-234-4961
Linear Actuating Cylinder Assembly

012344961
1H2H0A00269969: RNCC: 3 | RNVC: 2
GG094615C0: RNCC: 5 | RNVC: 9
2 1/2BB-2HLTS14X4 1/8STK: RNCC: 5 | RNVC: 9

14 Jun 1986

3040-01-232-9183
Bell Crank

012329183
65415-11401-045: RNCC: 3 | RNVC: 2
65415-11401-043: RNCC: E | RNVC: 8

21 May 1986

3040-01-232-9181
Bell Crank

012329181
65415-11201-043: RNCC: 3 | RNVC: 2

21 May 1986

3040-01-232-4413
Pressure Regul Shaft And Spring Assembly

012324413
34629: RNCC: 3 | RNVC: 2

14 May 1986

3040-01-232-0576
Shouldered Shaft

012320576
367704-2: RNCC: 3 | RNVC: 2
367704-1: RNCC: 5 | RNVC: 9
367704-2: RNCC: 5 | RNVC: 9

7 May 1986

3040-01-232-0575
Shouldered Shaft

012320575
367706-1: RNCC: 3 | RNVC: 2
367706-1: RNCC: 5 | RNVC: 2

7 May 1986

3040-01-231-9218
Shaft

012319218
75285-4: RNCC: 3 | RNVC: 2

6 May 1986

3040-01-231-5033
Shaft Collar

012315033
TSP24-12SS: RNCC: 3 | RNVC: 2
5451.130.3: RNCC: 5 | RNVC: 2

29 Apr 1986

3040-01-230-6413
Shouldered Shaft

012306413
BL-11480-1: RNCC: 3 | RNVC: 2
BL-10588-1: RNCC: 5 | RNVC: 9

16 Apr 1986

3040-01-229-9035
A Cylinder Assembly

012299035
1H2H0A00092483: RNCC: 3 | RNVC: 2
2 1/2CBB-2HLTVS13CX4.125: RNCC: 5 | RNVC: 9
AG146146A0: RNCC: 5 | RNVC: 9

6 Apr 1986

3040-01-229-7588
Shouldered Shaft

012297588
H14474: RNCC: 3 | RNVC: 2
H14474: RNCC: 3 | RNVC: 9
14474: RNCC: 5 | RNVC: 9
14474: RNCC: 5 | RNVC: 9

4 Apr 1986

3040-01-229-2777
A Cylinder Assembly

012292777
62283-207: RNCC: 3 | RNVC: 2
2CMNP1N-2 1/2-11-S3500: RNCC: 5 | RNVC: 2
2CM NP1N-2.5-11: RNCC: C | RNVC: 1

29 Mar 1986

3040-01-228-9265
Spur Gearshaft

012289265
367733-5: RNCC: 3 | RNVC: 2
367733-1: RNCC: 5 | RNVC: 9
367733-4: RNCC: 5 | RNVC: 9
367733: RNCC: D | RNVC: 9

22 Mar 1986

3040-01-228-4200
Shouldered Shaft

012284200
5191163-2: RNCC: 3 | RNVC: 2
5191163-2: RNCC: 5 | RNVC: 2

18 Mar 1986

3040-01-228-3187
Linear Actuati Head

012283187
4292-012056: RNCC: 3 | RNVC: 2
510635B: RNCC: 5 | RNVC: 2

17 Mar 1986

3040-01-227-3070
Pu Control Assembly

012273070
B-2287-24: RNCC: 3 | RNVC: 2
B-2287-24: RNCC: 5 | RNVC: 2
B-2287-24VM: RNCC: 5 | RNVC: 2

1 Mar 1986

3040-01-227-1983
Shouldered Shaft

012271983
117D2115-2: RNCC: 3 | RNVC: 2

1 Mar 1986

3040-01-226-6582
Shouldered Shaft

012266582
100673-1: RNCC: 3 | RNVC: 2
100673-1: RNCC: 5 | RNVC: 2
100673: RNCC: 5 | RNVC: 9

21 Feb 1986

3040-01-226-0410
Pu Control Assembly

012260410
B-2287-20: RNCC: 3 | RNVC: 2
B-2287-20VM: RNCC: 5 | RNVC: 2

11 Feb 1986

3040-01-226-0409
Pu Control Assembly

012260409
B-2287-49: RNCC: 3 | RNVC: 1
B-2287-49: RNCC: 5 | RNVC: 2
B-2287-49VM: RNCC: 5 | RNVC: 2

11 Feb 1986

3040-01-226-0407
Pu Control Assembly

012260407
B-2287-38: RNCC: 3 | RNVC: 1
B-2287-38: RNCC: 5 | RNVC: 2
B-2287-38: RNCC: 5 | RNVC: 2
B-2287-38VM: RNCC: 5 | RNVC: 2

11 Feb 1986

3040-01-226-0404
Pu Control Assembly

012260404
B-2287-27: RNCC: 3 | RNVC: 2
B-2287-27VM: RNCC: 5 | RNVC: 2
B-2287-27: RNCC: 5 | RNVC: 9

11 Feb 1986

3040-01-225-3656
Disk Brake Shoe

012253656
2B1-196: RNCC: 3 | RNVC: 2

1 Feb 1986

3040-01-224-9917
Shouldered Shaft

012249917
968251-00PH: RNCC: 3 | RNVC: 2
968251-00PH: RNCC: 3 | RNVC: 2
968251-00: RNCC: 3 | RNVC: 2
968251-00: RNCC: 3 | RNVC: 2
968251-00PH: RNCC: 3 | RNVC: 9
RY-167693 PC2: RNCC: 5 | RNVC: 1
RY-167693 PC2: RNCC: 5 | RNVC: 9
S6226-JZ-MMA-010 7-15-24: RNCC: 5 | RNVC: 9

25 Jan 1986

3040-01-224-5497
Manual Control Lever

012245497
1447190W: RNCC: 3 | RNVC: 2
1447190W: RNCC: 5 | RNVC: 9

17 Jan 1986

3040-01-224-3934
Rig Connecting Link

012243934
4F23661-125B: RNCC: 3 | RNVC: 2

15 Jan 1986

3040-01-223-3684
Torque Bracket

012233684
2663848: RNCC: 3 | RNVC: 2
2663848: RNCC: 5 | RNVC: 2

28 Dec 1985

3040-01-222-6591
Support Housing Assy.

012226591
12334217: RNCC: 3 | RNVC: 2
12334217: RNCC: 5 | RNVC: 2
12334217: RNCC: 5 | RNVC: 2
10085878: RNCC: 6 | RNVC: 9

15 Dec 1985

3040-01-222-5110
Roll Shaft Assembly

012225110
BL-10455: RNCC: 3 | RNVC: 2

12 Dec 1985

3040-01-222-0664
Rig Connecting Link

012220664
4067039: RNCC: 3 | RNVC: 2

6 Dec 1985

3040-01-221-5607
Shouldered Shaft

012215607
1502940: RNCC: 3 | RNVC: 2
1502940: RNCC: 5 | RNVC: 9

29 Nov 1985

3040-01-221-3220
Rotatin Eye Bracket

012213220
1509970W: RNCC: 3 | RNVC: 2
1509970W: RNCC: 5 | RNVC: 9

27 Nov 1985

3040-01-221-3205
Shaft Assembly

012213205
1505700W: RNCC: 3 | RNVC: 2
1505700: RNCC: 5 | RNVC: 9
1505700W: RNCC: 5 | RNVC: 9

27 Nov 1985

3040-01-220-7011
Rig Connecting Link

012207011
1400570: RNCC: 3 | RNVC: 2
1400570: RNCC: 5 | RNVC: 9

16 Nov 1985

3040-01-220-4382
Shouldered Shaft

012204382
788197-3: RNCC: 3 | RNVC: 2
788197-2: RNCC: 5 | RNVC: 9

13 Nov 1985

3040-01-220-3699
Shouldered Shaft

012203699
428203: RNCC: 3 | RNVC: 2

13 Nov 1985

3040-01-220-0104
Shaft Retaining Plate

012200104
1P7590: RNCC: 3 | RNVC: 2

6 Nov 1985

3040-01-219-9930
Remote Contro Lever

012199930
16151EH: RNCC: 3 | RNVC: 2

6 Nov 1985

3040-01-219-6720
Sha Retaining Plate

012196720
1435950: RNCC: 3 | RNVC: 2
1435950: RNCC: 5 | RNVC: 9

31 Oct 1985

3040-01-219-5639
Straight Shaft

012195639
62931: RNCC: 3 | RNVC: 2
62931: RNCC: 5 | RNVC: 1

29 Oct 1985

3040-01-218-8256
Rig Connecting Link

012188256
1311023-104: RNCC: 3 | RNVC: 2

19 Oct 1985

3040-01-217-9393
Spur Gearshaft

012179393
478915C1: RNCC: 3 | RNVC: 2
47-8-3: RNCC: 5 | RNVC: 9

5 Oct 1985

3040-01-216-8141
A Cylinder Assembly

012168141
8960-L: RNCC: 3 | RNVC: 2
8960-L: RNCC: 3 | RNVC: 9

17 Sep 1985

3040-01-216-1098
Axle Brake

012161098
T001412526: RNCC: 3 | RNVC: 2
T001412526: RNCC: 3 | RNVC: 9
T001412526: RNCC: 5 | RNVC: 2
1-412526: RNCC: 5 | RNVC: 2
412526: RNCC: 5 | RNVC: 9
1-412526: RNCC: 5 | RNVC: 9

6 Sep 1985

3040-01-216-0629
Counterbalan Weight

012160629
584944CL6: RNCC: 3 | RNVC: 2

6 Sep 1985

3040-01-215-6642
Multiple Disk Brake

012156642
55100: RNCC: 3 | RNVC: 2
1.60034: RNCC: 5 | RNVC: 2
2CK607: RNCC: 5 | RNVC: 2
2CK607: RNCC: 5 | RNVC: 9
55100: RNCC: 5 | RNVC: 9

29 Aug 1985

3040-01-215-5983
Flex Shaft Assembly

012155983
11463732: RNCC: 3 | RNVC: 2
11463732: RNCC: 5 | RNVC: 1

27 Aug 1985

3040-01-215-1717
Manual Contro Lever

012151717
02182900: RNCC: 3 | RNVC: 2

22 Aug 1985

3040-01-214-3924
Linear Actuating Cylinder Head

012143924
6-701-000210: RNCC: 3 | RNVC: 2
2CT175: RNCC: 5 | RNVC: 2
2CT175: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-214-3864
Brake Cam

012143864
23018110: RNCC: 3 | RNVC: 2
23018110: RNCC: 8 | RNVC: 2

9 Aug 1985

3040-01-214-1291
Actuating Cylinder

012141291
8W0328: RNCC: 3 | RNVC: 2

6 Aug 1985

3040-01-211-5614
Shouldered Shaft

012115614
387-3550: RNCC: 3 | RNVC: 2
387-3550: RNCC: 3 | RNVC: 9
387-3550: RNCC: 5 | RNVC: 9
387-3550: RNCC: 5 | RNVC: 9

28 Jun 1985

3040-01-211-2720
Shouldered Shaft

012112720
11463580: RNCC: 3 | RNVC: 2
11463580: RNCC: 5 | RNVC: 1

24 Jun 1985

3040-01-209-9041
Spur Gearshaft

012099041
728457: RNCC: 3 | RNVC: 2

5 Jun 1985

3040-01-209-3879
Spline Adapter

012093879
1593588-7: RNCC: 3 | RNVC: 2
81-313100-02: RNCC: 5 | RNVC: 2
1593588-7: RNCC: 5 | RNVC: 9

29 May 1985

3040-01-208-9288
Shouldered Shaft

012089288
7-0064-01: RNCC: 3 | RNVC: 2
DH6080D-1 PIECE 7: RNCC: 5 | RNVC: 1
NF14770: RNCC: D | RNVC: 9

21 May 1985

3040-01-208-2809
Rigid Connecting Link

012082809
3161452-15: RNCC: 3 | RNVC: 2
SS-3161452-15: RNCC: 5 | RNVC: 2
3161452-15: RNCC: 5 | RNVC: 9

11 May 1985

3040-01-207-9303
Rigid Connecting Link

012079303
L6410053-015: RNCC: 3 | RNVC: 2

7 May 1985

3040-01-207-3582
Shouldered Shaft

012073582
27072: RNCC: 3 | RNVC: 2
27072: RNCC: 3 | RNVC: 9
27072: RNCC: 5 | RNVC: 9

1 May 1985

3040-01-205-8949
Shaft

012058949
203103: RNCC: 3 | RNVC: 2

12 Apr 1985

3040-01-203-4242
Manual Control Lever

012034242
314 3252: RNCC: 3 | RNVC: 2

14 Mar 1985

3040-01-202-9161
Control Cam

012029161
3034-345: RNCC: 3 | RNVC: 2

7 Mar 1985

3040-01-202-7293
Actuating Cylinder

012027293
2012B2-10: RNCC: 3 | RNVC: 2
2012B2-10: RNCC: 5 | RNVC: 2
2012B2-10: RNCC: C | RNVC: 1

5 Mar 1985

3040-01-202-7270
Control Cam

012027270
2012A10A: RNCC: 3 | RNVC: 2
2012A10A: RNCC: 7 | RNVC: 9
2012A10A: RNCC: C | RNVC: 1

5 Mar 1985

3040-01-201-5963
Linear Ac Parts Kit

012015963
PDG8491: RNCC: 3 | RNVC: 2
PDG8491: RNCC: 5 | RNVC: 9

20 Feb 1985

3040-01-201-1618
Lock Ring

012011618
A1020F224: RNCC: 3 | RNVC: 2

13 Feb 1985

3040-01-200-9108
Bell Crank

012009108
9531M51P01: RNCC: 3 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 9
9531M51P01: RNCC: 5 | RNVC: 9
9531M51P01: RNCC: 5 | RNVC: 9
9531M51P01: RNCC: C | RNVC: 1

10 Feb 1985

3040-01-200-7097
Shouldered Shaft

012007097
3500959-2: RNCC: 3 | RNVC: 2

8 Feb 1985

3040-01-200-5148
Shouldered Shaft

012005148
36B510958G1: RNCC: 3 | RNVC: 2
36B510958G1: RNCC: 5 | RNVC: 9

5 Feb 1985

3040-01-200-3010
Injector Plunger Link

012003010
205462: RNCC: 3 | RNVC: 2

1 Feb 1985

3040-01-200-2245
Shouldered Shaft

012002245
WLM290075: RNCC: 3 | RNVC: 2
290075: RNCC: 5 | RNVC: 2
2CK24: RNCC: 5 | RNVC: 2
290075: RNCC: 5 | RNVC: 2
9-734-100623: RNCC: 5 | RNVC: 9
9-734-100: RNCC: 5 | RNVC: 9
2CK24: RNCC: 5 | RNVC: 9
290075: RNCC: 5 | RNVC: 9
D-290075: RNCC: D | RNVC: 9

31 Jan 1985

3040-01-199-8749
Shaft Collar

011998749
007265-1: RNCC: 3 | RNVC: 2
007265-1: RNCC: 3 | RNVC: 9

26 Jan 1985

3040-01-199-3226
Tachome Drive Shaft

011993226
029-20541: RNCC: 3 | RNVC: 2

20 Jan 1985

3040-01-199-3055
Helical Gearshaft

011993055
SS800B-17: RNCC: 3 | RNVC: 2
SS800B-17: RNCC: 3 | RNVC: 9

19 Jan 1985

3040-01-198-3745
Control Cam

011983745
3035-262: RNCC: 3 | RNVC: 2

7 Jan 1985

3040-01-198-3690
Shouldered Shaft

011983690
161504-2: RNCC: 3 | RNVC: 2

7 Jan 1985

3040-01-198-0699
A Cylinder Assembly

011980699
319 6461: RNCC: 3 | RNVC: 2

4 Jan 1985

3040-01-198-0673
Rig Connecting Link

011980673
12329034-1: RNCC: 3 | RNVC: 2
12329034-1: RNCC: 5 | RNVC: 2
12329034: RNCC: D | RNVC: 9

4 Jan 1985

3040-01-197-1747
Shouldered Shaft

011971747
13216E6142-5: RNCC: 3 | RNVC: 9
13216E6142-5: RNCC: 5 | RNVC: 2

19 Dec 1984

3040-01-196-1505
Pawl

011961505
11571300-11: RNCC: 3 | RNVC: 9
11441400 ITEM 2: RNCC: 5 | RNVC: 2
11571300-11: RNCC: 5 | RNVC: 2
11441400 ITEM 2: RNCC: 5 | RNVC: 9
11441400 ITEM 2: RNCC: 5 | RNVC: 9
11571300-11: RNCC: 5 | RNVC: 9
11441400: RNCC: D | RNVC: 9

7 Dec 1984

3040-01-196-1229
Shouldered Shaft

011961229
458-52264-506: RNCC: 3 | RNVC: 2
458-52264-501: RNCC: 5 | RNVC: 9
458-52264-501: RNCC: 5 | RNVC: 9
458-52264: RNCC: D | RNVC: 9

7 Dec 1984

3040-01-196-0942
A Cylinder Assembly

011960942
C-6601: RNCC: 3 | RNVC: 2

7 Dec 1984

3040-01-195-6830
Steam Cylind Lining

011956830
UA-22: RNCC: 3 | RNVC: 2
4A22-AP: RNCC: 5 | RNVC: 2
A1497-1 PIECE 2: RNCC: 5 | RNVC: 9
A1497-1: RNCC: D | RNVC: 9

1 Dec 1984

3040-01-195-4313
Spur Gearshaft

011954313
870624080: RNCC: 3 | RNVC: 2
3040PL0661331: RNCC: 6 | RNVC: 9

29 Nov 1984

3040-01-195-1794
Linear Actuating Cylinder Assembly

011951794
SKD-160380: RNCC: 3 | RNVC: 2
SKD-160380: RNCC: 5 | RNVC: 2
10517537: RNCC: 5 | RNVC: 2
2.50CPLS13CX 31.500: RNCC: 5 | RNVC: 9
SKD-160118: RNCC: 5 | RNVC: 9

23 Nov 1984

3040-01-195-1139
Spur Gearshaft

011951139
197C7412: RNCC: 3 | RNVC: 2

22 Nov 1984

3040-01-194-0067
Straight Shaft

011940067
23613115: RNCC: 3 | RNVC: 9
23613115: RNCC: C | RNVC: 1
2261221-1: RNCC: C | RNVC: 1

9 Nov 1984

3040-01-194-0066
Straight Shaft

011940066
23613118: RNCC: 3 | RNVC: 2
23613118: RNCC: 3 | RNVC: 9

9 Nov 1984

3040-01-193-0490
Body Hub

011930490
212857: RNCC: 3 | RNVC: 2
212857: RNCC: C | RNVC: 1

29 Oct 1984

3040-01-192-9197
Shouldered Shaft

011929197
014419-1: RNCC: 3 | RNVC: 2
014419-1: RNCC: 3 | RNVC: 9

27 Oct 1984

3040-01-192-1265
Rod End Ball Joint

011921265
322114 ITEM 28: RNCC: 3 | RNVC: 2
SPF-65: RNCC: C | RNVC: 1

17 Oct 1984

3040-01-191-8906
Spur Gearshaft

011918906
2042101-1: RNCC: 3 | RNVC: 2
2042101-1: RNCC: 5 | RNVC: 2
10130546: RNCC: 6 | RNVC: 9
2042101: RNCC: D | RNVC: 9

13 Oct 1984

3040-01-191-4474
Rig Connecting Link

011914474
3537535: RNCC: 3 | RNVC: 2
3537535-1: RNCC: 5 | RNVC: 2
10106970: RNCC: 6 | RNVC: 9
3537535: RNCC: D | RNVC: 9

7 Oct 1984

3040-01-191-0716
Rig Connecting Link

011910716
7543-6202: RNCC: 3 | RNVC: 2
KSL127600BX-6202: RNCC: 5 | RNVC: 2
SR10726A-6202: RNCC: 5 | RNVC: 2
LE162-0023-6202: RNCC: 7 | RNVC: 2

5 Feb 2004

3040-01-191-0124
Rig Connecting Link

011910124
4061358: RNCC: 3 | RNVC: 2
4061358: RNCC: 5 | RNVC: 2
4061358: RNCC: 5 | RNVC: 9

4 Oct 1984

3040-01-189-4266
Manual Contro Lever

011894266
382-812-020-401-026: RNCC: 3 | RNVC: 2
382-812-020-401-026: RNCC: 5 | RNVC: 2
382-812-020-401-038: RNCC: 5 | RNVC: 9
350-812-020-401-026: RNCC: 5 | RNVC: 9
382-812-020-401-026: RNCC: 5 | RNVC: 9
3040PL1327944: RNCC: 6 | RNVC: 9
133-020-401-026: RNCC: E | RNVC: 8

15 Sep 1984

3040-01-188-3458
Bell Crank

011883458
458-58508-1: RNCC: 3 | RNVC: 2

2 Sep 1984

3040-01-187-9744
Breather

011879744
9291620: RNCC: 1 | RNVC: 2
F68300: RNCC: 3 | RNVC: 2

29 Aug 1984

3040-01-187-9598
Piston Ring Set

011879598
S11052-34P: RNCC: 3 | RNVC: 2
S11052-0034P: RNCC: 5 | RNVC: 2
S11052-34P: RNCC: 5 | RNVC: 9

29 Aug 1984

3040-01-187-5064
A Cylinder Assembly

011875064
528P393: RNCC: 3 | RNVC: 2
528P393CP: RNCC: 5 | RNVC: 2
528P292CP: RNCC: 5 | RNVC: 9
528P393CP: RNCC: 5 | RNVC: 9
528P292: RNCC: 5 | RNVC: 9

23 Aug 1984

3040-01-187-3121
Counterbalan Weight

011873121
301-332-446-0: RNCC: 3 | RNVC: 2
301-332-446-0: RNCC: 5 | RNVC: 2
301-332-446-0: RNCC: 5 | RNVC: 2
301-332-435-0: RNCC: 5 | RNVC: 9
301-332-435-0: RNCC: 5 | RNVC: 9
301-332-435-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-187-2918
Shouldered Shaft

011872918
5006959: RNCC: 3 | RNVC: 2
5006959: RNCC: 5 | RNVC: 2

21 Aug 1984

3040-01-186-4440
Rig Connecting Link

011864440
406-010-413-113: RNCC: 3 | RNVC: 2
406-010-413-101: RNCC: 5 | RNVC: 9

10 Aug 1984

3040-01-186-1564
Spur-Worm Gearshaft

011861564
2040804-2: RNCC: 3 | RNVC: 2
2040804-2: RNCC: 5 | RNVC: 9

8 Aug 1984

3040-01-185-8011
Shouldered Shaft

011858011
18138: RNCC: 3 | RNVC: 2
18138: RNCC: 5 | RNVC: 9
14841: RNCC: 5 | RNVC: 9

4 Aug 1984

3040-01-185-0710
Shouldered Shaft

011850710
217125: RNCC: 3 | RNVC: 2

25 Jul 1984

3040-01-184-6852
Shouldered Shaft

011846852
014417-501: RNCC: 3 | RNVC: 2
014417-501: RNCC: 3 | RNVC: 9

21 Jul 1984

3040-01-184-4768
Shouldered Shaft

011844768
2AN765: RNCC: 3 | RNVC: 2
2AN765: RNCC: 5 | RNVC: 9
45A242-P2: RNCC: 5 | RNVC: 9
9940.0022/9.25: RNCC: C | RNVC: 1

18 Jul 1984

3040-01-184-3948
Pushrod Assembly

011843948
123L10012-602: RNCC: 3 | RNVC: 2
123L10012-602B: RNCC: 5 | RNVC: 1
123L10012-602: RNCC: 5 | RNVC: 2
123L10012-602: RNCC: 5 | RNVC: 9
123L10012-4: RNCC: C | RNVC: 1
123L10012-602: RNCC: C | RNVC: 1

18 Jul 1984

3040-01-184-1872
Hydraulic Accumulator Cylinder

011841872
RC254: RNCC: 3 | RNVC: 2

17 Jul 1984

3040-01-184-0244
Linear A Piston Rod

011840244
5J0771: RNCC: 3 | RNVC: 2
5J771: RNCC: 5 | RNVC: 2

12 Jul 1984

3040-01-183-9774
Shouldered Shaft

011839774
014420-1: RNCC: 3 | RNVC: 2
014420-1: RNCC: 3 | RNVC: 9

12 Jul 1984

3040-01-183-9056
Linear Actuating Cylinder Assembly

011839056
A13403: RNCC: 3 | RNVC: 2

11 Jul 1984

3040-01-183-2485
Manual Contro Lever

011832485
02182700: RNCC: 3 | RNVC: 2
C7-593-000194: RNCC: 5 | RNVC: 2
1664485: RNCC: C | RNVC: 1
2509849: RNCC: C | RNVC: 1
2910119: RNCC: C | RNVC: 1
2910119: RNCC: C | RNVC: 1
4031761: RNCC: C | RNVC: 1
4086381: RNCC: C | RNVC: 1
01167200: RNCC: C | RNVC: 1

4 Jul 1984

3040-01-182-9029
Rig Connecting Link

011829029
7-211524001-9: RNCC: 1 | RNVC: 2
6027-1: RNCC: 3 | RNVC: 2
A-AH64001-9: RNCC: 3 | RNVC: 2
55080-9: RNCC: 5 | RNVC: 9
7-211524001-9: RNCC: 5 | RNVC: 9
7-211524001-9: RNCC: 5 | RNVC: 9

30 Jun 1984

3040-01-182-7848
Mechanical Drive Housing

011827848
894044: RNCC: 3 | RNVC: 2
894044: RNCC: 5 | RNVC: 2

27 Jun 1984

3040-01-182-6893
Bracket Assembly

011826893
315-6903: RNCC: 3 | RNVC: 2
8J7520: RNCC: 5 | RNVC: 9

27 Jun 1984

3040-01-182-5055
Rig Connecting Link

011825055
7-211521008: RNCC: 3 | RNVC: 2
7-211521008: RNCC: 5 | RNVC: 9

25 Jun 1984

3040-01-182-4576
Rig Connecting Link

011824576
7514-6052-G: RNCC: 3 | RNVC: 2
LE162-0002-6052: RNCC: 5 | RNVC: 2
SR10784A-6052: RNCC: 5 | RNVC: 9
7514-6052: RNCC: 5 | RNVC: 9
LE162-0002: RNCC: D | RNVC: 9

23 Jun 1984

3040-01-182-0104
Rig Connecting Link

011820104
4453-032: RNCC: 3 | RNVC: 2

19 Jun 1984

3040-01-181-9800
Shouldered Shaft

011819800
42000A: RNCC: 3 | RNVC: 2

19 Jun 1984

3040-01-181-6312
Governor Shaft

011816312
360520: RNCC: 3 | RNVC: 2

13 Jun 1984

3040-01-181-6290
Main Governor Shaft

011816290
P202476: RNCC: 3 | RNVC: 2
P202476: RNCC: 3 | RNVC: 9

13 Jun 1984

3040-01-181-4086
Rig Connecting Link

011814086
406-001-507-101: RNCC: 3 | RNVC: 2

9 Jun 1984

3040-01-180-7108
Rig Connecting Link

011807108
70207-22217-113: RNCC: 3 | RNVC: 2

2 Jun 1984

3040-01-180-0675
Rig Connecting Link

011800675
P412450: RNCC: 3 | RNVC: 2
P412450: RNCC: 3 | RNVC: 9

24 May 1984

3040-01-179-8752
Drive Shaft

011798752
P308087: RNCC: 3 | RNVC: 2
P308087: RNCC: 3 | RNVC: 9

22 May 1984

3040-01-179-7455
Rigid Connecting Link

011797455
7-311527009: RNCC: 3 | RNVC: 2
7-311527009: RNCC: 3 | RNVC: 9

21 May 1984

3040-01-179-6133
Shouldered Shaft

011796133
P307984N: RNCC: 3 | RNVC: 2
P307984N: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-6063
Shouldered Shaft

011796063
006-NGC-004-300: RNCC: 3 | RNVC: 2
D-006-NGC-0-04-320: RNCC: 5 | RNVC: 9
C-006-NGC-0-04-301: RNCC: 5 | RNVC: 9
FNGC0-96-007PC6: RNCC: C | RNVC: 1
FNDG0-99-002PC6: RNCC: C | RNVC: 1
D-006-NGC-0-04-301: RNCC: C | RNVC: 1
F-NGC-0-99-022 ITEM 9: RNCC: C | RNVC: 1
D-006-NGC-0-01-320: RNCC: C | RNVC: 1
D-006-NGC-0-04-300: RNCC: C | RNVC: 1

19 May 1984

3040-01-179-5164
Rig Connecting Link

011795164
P05983N: RNCC: 3 | RNVC: 9
P05983N: RNCC: C | RNVC: 1

19 May 1984

3040-01-179-5080
Shouldered Shaft

011795080
P204614N: RNCC: 3 | RNVC: 2
P204614N: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-178-5489
Ball Joint

011785489
50141-6: RNCC: 3 | RNVC: 9
000-50141-0006: RNCC: 5 | RNVC: 2
10513722: RNCC: 5 | RNVC: 2

7 May 1984

3040-01-178-3293
Bell Crank

011783293
70400-02501-047: RNCC: 3 | RNVC: 2

4 May 1984

3040-01-177-5823
Shouldered Shaft

011775823
7-311518004: RNCC: 3 | RNVC: 2
7-311518004: RNCC: 5 | RNVC: 9

27 Apr 1984

3040-01-177-2435
Linear Actua Piston

011772435
62E102-34: RNCC: 3 | RNVC: 2
538-07812-000 ITEM 205: RNCC: 5 | RNVC: 2
901-07791-000: RNCC: 5 | RNVC: 2
538-07812-000 ITEM 205: RNCC: 5 | RNVC: 9
538-7812 ITEM 205: RNCC: 5 | RNVC: 9
62E102: RNCC: D | RNVC: 9

20 Apr 1984

3040-01-177-1900
Bell Crank

011771900
70400-02502-047: RNCC: 3 | RNVC: 2

20 Apr 1984

3040-01-176-9268
Body Hub

011769268
75-1105-1: RNCC: 3 | RNVC: 2

17 Apr 1984

3040-01-175-6484
Linear Actuating Cylinder

011756484
8J6381: RNCC: 3 | RNVC: 2

3 Apr 1984

3040-01-174-1814
Pushrod Assembly

011741814
123L10012-601: RNCC: 3 | RNVC: 2
123L10012-601: RNCC: 5 | RNVC: 2
123L10012-601B: RNCC: 5 | RNVC: 9
123L10012-601: RNCC: 5 | RNVC: 9
123L10012-601: RNCC: 5 | RNVC: 9
123L10012-601B: RNCC: C | RNVC: 1
123L10012-3: RNCC: E | RNVC: 8

15 Mar 1984

3040-01-173-5853
Brake Disc

011735853
5002627: RNCC: 3 | RNVC: 2
5002627: RNCC: 5 | RNVC: 9

7 Mar 1984

3040-01-173-5620
Body Hub

011735620
3500779-1: RNCC: 3 | RNVC: 2
357079: RNCC: C | RNVC: 1

7 Mar 1984

3040-01-172-9362
Control Cam

011729362
2668957: RNCC: 3 | RNVC: 2
2668957: RNCC: 5 | RNVC: 2
10159086: RNCC: 6 | RNVC: 9

28 Feb 1984

3040-01-172-5447
Brake Disc

011725447
8-003-704-01: RNCC: 3 | RNVC: 2

22 Feb 1984

3040-01-172-3716
Rig Connecting Link

011723716
123BM10213-613: RNCC: 3 | RNVC: 2
123BM10213-613: RNCC: 5 | RNVC: 2
123BM10213-613: RNCC: 5 | RNVC: 9

20 Feb 1984

3040-01-172-2708
Straight Shaft

011722708
6G2947: RNCC: 3 | RNVC: 2

18 Feb 1984

3040-01-169-7388
Manual Contro Lever

011697388
02324400: RNCC: 3 | RNVC: 2
LA-889-8: RNCC: 5 | RNVC: 2
LA-889-8: RNCC: 5 | RNVC: 9
02183400: RNCC: 5 | RNVC: 9

13 Jan 1984

3040-01-169-4712
Shouldered Shaft

011694712
735410: RNCC: 3 | RNVC: 2

9 Jan 1984

3040-01-167-9213
Linear Actua Piston

011679213
8J0113: RNCC: 3 | RNVC: 2
8J113: RNCC: 5 | RNVC: 9

8 Dec 1983

3040-01-167-9211
Manual Control Lever

011679211
1U4661: RNCC: 3 | RNVC: 2
9J2012: RNCC: 5 | RNVC: 9

8 Dec 1983

3040-01-167-8326
Pawl

011678326
12524384: RNCC: 3 | RNVC: 2
465-4384: RNCC: 5 | RNVC: 2
465-4384: RNCC: 5 | RNVC: 9

7 Dec 1983

3040-01-167-7504
Rig Connecting Link

011677504
70400-22268-041: RNCC: 3 | RNVC: 2
SR11779A: RNCC: 5 | RNVC: 9

4 Dec 1983

3040-01-167-2873
Linear Ac Parts Kit

011672873
666-2331-07: RNCC: 3 | RNVC: 2
5505-34: RNCC: 5 | RNVC: 2
666-2331-07: RNCC: 5 | RNVC: 9

24 Nov 1983

3040-01-166-8891
Ball Joint

011668891
281800C92: RNCC: 3 | RNVC: 2
SR107G: RNCC: 5 | RNVC: 2
8126259: RNCC: 5 | RNVC: 9
4254788: RNCC: E | RNVC: 8
74254919-9: RNCC: E | RNVC: 8
SW1002CP: RNCC: E | RNVC: 8
SW1002: RNCC: E | RNVC: 8

18 Nov 1983

3040-01-166-3327
Rig Connecting Link

011663327
123BM10213-614: RNCC: 3 | RNVC: 2
123BM10213-614: RNCC: 5 | RNVC: 2
123BM10213-614: RNCC: 5 | RNVC: 2
123BM10213-614: RNCC: 5 | RNVC: 9

9 Nov 1983

3040-01-166-3326
Rig Connecting Link

011663326
123BM10213-611: RNCC: 3 | RNVC: 2
123BM10213-611: RNCC: 5 | RNVC: 9
123BM10213-611: RNCC: 5 | RNVC: 9
123BM10213-1: RNCC: C | RNVC: 1

9 Nov 1983

3040-01-166-0582
Actuator Tran Brake

011660582
KSMR3PT50-S50106: RNCC: 3 | RNVC: 2
10502577: RNCC: 5 | RNVC: 2
KSMR3PT50-S50106: RNCC: 5 | RNVC: 9
KSMR3PT501300NN: RNCC: 5 | RNVC: 9

6 Nov 1983

3040-01-165-6051
Control Cam

011656051
1020069: RNCC: 3 | RNVC: 2

31 Oct 1983

3040-01-165-1020
Rig Connecting Link

011651020
7-211524001-519: RNCC: 1 | RNVC: 2
7-211524001-519: RNCC: 3 | RNVC: 2
55080-519: RNCC: 5 | RNVC: 9
A-AH64001-519: RNCC: 5 | RNVC: 9
6037-519: RNCC: 5 | RNVC: 9
SR11842A519: RNCC: 5 | RNVC: 9
7-211524001-519: RNCC: 5 | RNVC: 9

26 Oct 1983

3040-01-164-6214
Actuating Cylinder

011646214
5210330: RNCC: 3 | RNVC: 2
A67-B: RNCC: 5 | RNVC: 2
A67-B: RNCC: 5 | RNVC: 9

19 Oct 1983

3040-01-163-8622
Breather

011638622
4847487: RNCC: 1 | RNVC: 2
26294AL: RNCC: 3 | RNVC: 2
5210113 PIECE 118: RNCC: 5 | RNVC: 2
5210113: RNCC: D | RNVC: 9

8 Oct 1983

3040-01-163-7313
Manual Control Lever

011637313
1352020W: RNCC: 3 | RNVC: 2
1352020W: RNCC: 5 | RNVC: 9

6 Oct 1983

3040-01-163-6865
Linear Actuating Cylinder Assembly

011636865
B-6447: RNCC: 3 | RNVC: 2
7M746-1: RNCC: 3 | RNVC: 2

6 Oct 1983

3040-01-163-4365
Shouldered Shaft

011634365
731791: RNCC: 3 | RNVC: 2

4 Oct 1983

3040-01-163-0794
Shift Mount Asy

011630794
1351980W: RNCC: 3 | RNVC: 2
1351980W: RNCC: 5 | RNVC: 9

27 Sep 1983

3040-01-163-0716
Straight Shaft

011630716
3231906-1: RNCC: 3 | RNVC: 2
3231906-1: RNCC: 5 | RNVC: 2
3231906-1: RNCC: 5 | RNVC: 2
3231906-1: RNCC: 5 | RNVC: 9
3231906-1: RNCC: 5 | RNVC: 9
3231906: RNCC: D | RNVC: 9

27 Sep 1983

3040-01-161-8618
Rig Connecting Link

011618618
2012B201: RNCC: 3 | RNVC: 2
2012B201: RNCC: 3 | RNVC: 9

11 Sep 1983

3040-01-161-8616
Bell Crank

011618616
70400-01215-043: RNCC: 3 | RNVC: 2

11 Sep 1983

3040-01-161-8349
Rig Connecting Link

011618349
2012A74: RNCC: 3 | RNVC: 2
2012A74: RNCC: 5 | RNVC: 2
2012A74: RNCC: 5 | RNVC: 2

11 Sep 1983

3040-01-161-5898
A Cylinder Assembly

011615898
B-6459: RNCC: 3 | RNVC: 2
7M717-1: RNCC: 3 | RNVC: 2

7 Sep 1983

3040-01-161-4805
Shouldered Shaft

011614805
731816: RNCC: 3 | RNVC: 2

6 Sep 1983

3040-01-160-9999
Ball Joint

011609999
50141-4: RNCC: 3 | RNVC: 2
000-50141-0004: RNCC: 3 | RNVC: 2
10503391: RNCC: 5 | RNVC: 2
50141-4: RNCC: 5 | RNVC: 9

31 Aug 1983

3040-01-160-9585
Shaft Retaining Plate

011609585
6839647: RNCC: 3 | RNVC: 2

31 Aug 1983

3040-01-160-5517
Spur Gearshaft

011605517
731808: RNCC: 3 | RNVC: 2

23 Aug 1983

3040-01-160-3881
Rig Connecting Link

011603881
3168996-1: RNCC: 3 | RNVC: 9
3168996: RNCC: 5 | RNVC: 2
3168996-1: RNCC: 5 | RNVC: 9
10106961: RNCC: 6 | RNVC: 9

21 Aug 1983

3040-01-159-9625
Turbine Tierod

011599625
558089: RNCC: 3 | RNVC: 2
558089: RNCC: 5 | RNVC: 2
558089: RNCC: 5 | RNVC: 9

16 Aug 1983

3040-01-159-8674
Shouldered Shaft

011598674
11367: RNCC: 3 | RNVC: 2
2AW157: RNCC: 3 | RNVC: 2
2AW157: RNCC: 5 | RNVC: 9
11367: RNCC: 5 | RNVC: 9
50818: RNCC: D | RNVC: 9

14 Aug 1983

3040-01-159-4818
Rigid Connecting Link

011594818
70400-22258-043: RNCC: 3 | RNVC: 2
70400-22258-043: RNCC: 5 | RNVC: 2
70400-22258-043: RNCC: 5 | RNVC: 9
3040PL1939280: RNCC: 6 | RNVC: 9

9 Aug 1983

3040-01-159-4817
Bell Crank

011594817
70400-02205-043: RNCC: 3 | RNVC: 2
3040PL1939022: RNCC: 6 | RNVC: 9

9 Aug 1983

3040-01-159-4611
Rigid Connecting Link

011594611
70400-02258-048: RNCC: 3 | RNVC: 2
70400-02258-048: RNCC: 5 | RNVC: 2
3040PL1960072: RNCC: 6 | RNVC: 9
70400-02258-048: RNCC: 7 | RNVC: 2

9 Aug 1983

Load More Results