What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 151 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 151of 575

3040-01-598-4435
Rigid Connecting Link

015984435
116-214144-001: RNCC: 3 | RNVC: 2
116-214144-001: RNCC: 5 | RNVC: 2

2 Aug 2011

3040-01-598-0332
Hub Clamp

015980332
CAU25005: RNCC: 1 | RNVC: 2
3107-Z-1352: RNCC: 3 | RNVC: 2
CAU25005: RNCC: 5 | RNVC: 2

28 Jun 2011

3040-01-598-0105
Straight Shaft

015980105
4182008: RNCC: 1 | RNVC: 2
73789: RNCC: 3 | RNVC: 2

27 Jun 2011

3040-01-593-9620
Shouldered Shaft

015939620
3929078: RNCC: 3 | RNVC: 2
3929078: RNCC: 5 | RNVC: 9

22 Apr 2011

3040-01-593-9253
Rigid Connecting Link

015939253
3925361: RNCC: 3 | RNVC: 2
3925361: RNCC: 5 | RNVC: 9

21 Apr 2011

3040-01-593-4604
Rigid Connecting Link

015934604
105-214144-001: RNCC: 3 | RNVC: 2
105-214144-001: RNCC: 5 | RNVC: 2

7 Apr 2011

3040-01-587-8744
Piston Ring

015878744
15261-2397-3: RNCC: 3 | RNVC: 2

24 Aug 2010

3040-01-587-8720
Piston Ring

015878720
15261-2354-3: RNCC: 3 | RNVC: 2

24 Aug 2010

3040-01-587-4587
Cylinder Adapter Tube

015874587
883-0482: RNCC: 3 | RNVC: 2
588906C1: RNCC: 5 | RNVC: 2

6 Aug 2010

3040-01-587-4583
Shouldered Shaft

015874583
776-0296: RNCC: 3 | RNVC: 9
1697957C1: RNCC: 5 | RNVC: 2

6 Aug 2010

3040-01-587-4578
Cylinder Adapter Tube

015874578
883-0893: RNCC: 3 | RNVC: 2
1681096C1: RNCC: 5 | RNVC: 2

6 Aug 2010

3040-01-587-4575
Cylinder Adapter Tube

015874575
883-0877: RNCC: 3 | RNVC: 2

6 Aug 2010

3040-01-587-4570
Shouldered Shaft

015874570
776-0374: RNCC: 3 | RNVC: 2

6 Aug 2010

3040-01-587-4567
Linear Actuating Cylinder Piston

015874567
753-0245: RNCC: 3 | RNVC: 2
1681080C1: RNCC: 5 | RNVC: 2

6 Aug 2010

3040-01-587-4569
Shouldered Shaft

015874569
769-0498: RNCC: 3 | RNVC: 9

6 Aug 2010

3040-01-587-4568
Shouldered Shaft

015874568
769-0389: RNCC: 3 | RNVC: 9
1681092C1: RNCC: 5 | RNVC: 2

6 Aug 2010

3040-01-587-4566
Linear Actuating Cylinder Piston

015874566
753-0232: RNCC: 3 | RNVC: 2
588888C1: RNCC: 5 | RNVC: 2

6 Aug 2010

3040-01-587-4548
Linear Actuating Cylinder Cap

015874548
235-0352: RNCC: 3 | RNVC: 2
588892C1: RNCC: 5 | RNVC: 2

6 Aug 2010

3040-01-587-4547
Multiple Gears Gearshaft

015874547
776-0287: RNCC: 3 | RNVC: 2
1697953C1: RNCC: 5 | RNVC: 2

6 Aug 2010

3040-01-587-4549
Linear Actuating Cylinder

015874549
295-0393: RNCC: 3 | RNVC: 2

6 Aug 2010

3040-01-587-4536
Multiple Gears Gearshaft

015874536
776-0327: RNCC: 3 | RNVC: 2
1698040C1: RNCC: 5 | RNVC: 2

6 Aug 2010

3040-01-587-4531
Shouldered Shaft

015874531
776-0398: RNCC: 3 | RNVC: 2
776-0398: RNCC: 5 | RNVC: 9

6 Aug 2010

3040-01-587-3758
Joint Pipe

015873758
16809-95684: RNCC: 3 | RNVC: 2
16809-9568-0: RNCC: 5 | RNVC: 9

4 Aug 2010

3040-01-586-8551
Mechanical Drive Housing

015868551
MVG75-1214: RNCC: 3 | RNVC: 2
22KP453: RNCC: 5 | RNVC: 1

16 Jul 2010

3040-01-586-3848
Ball Joint

015863848
L-24-SV-8203-B-14: RNCC: 3 | RNVC: 2
23KP610: RNCC: 5 | RNVC: 2
23KP610: RNCC: 5 | RNVC: 9

28 Jun 2010

3040-01-586-3842
Ball Joint

015863842
L-24-SV-8202-D-14: RNCC: 3 | RNVC: 2
23KP609: RNCC: 5 | RNVC: 2
23KP609: RNCC: 5 | RNVC: 9

28 Jun 2010

3040-01-586-3804
Straight Shaft

015863804
3840068: RNCC: 3 | RNVC: 2
3840068: RNCC: 5 | RNVC: 9

28 Jun 2010

3040-01-586-3769
Mechanical Drive Housing

015863769
3830698: RNCC: 3 | RNVC: 2
3830698: RNCC: 5 | RNVC: 9

28 Jun 2010

3040-01-586-0825
Rigid Connecting Link

015860825
0903232032: RNCC: 3 | RNVC: 2

17 Jun 2010

3040-01-586-0755
Shouldered Shaft Assembly

015860755
208003520: RNCC: 3 | RNVC: 2
0740000029: RNCC: D | RNVC: 9

17 Jun 2010

3040-01-585-2547
Planetary Gears Carrier

015852547
29530460: RNCC: 3 | RNVC: 2

20 May 2010

3040-01-585-1441
Rigid Connecting Link

015851441
22KP916: RNCC: 1 | RNVC: 2
0312107162-00: RNCC: 3 | RNVC: 2

18 May 2010

3040-01-584-9677
Housing Adapter

015849677
3939088: RNCC: 3 | RNVC: 2

12 May 2010

3040-01-584-4224
Shaft Retaining Plate

015844224
3106481: RNCC: 3 | RNVC: 2

26 Apr 2010

3040-01-584-1143
Shouldered Shaft

015841143
3792519C1: RNCC: 3 | RNVC: 2
69081-041: RNCC: C | RNVC: 1

16 Apr 2010

3040-01-583-2974
Rigid Connecting Link

015832974
0312107098-00: RNCC: 3 | RNVC: 2
26KP377: RNCC: 7 | RNVC: 2

22 Mar 2010

3040-01-583-2767
Planetary Gears Carrier

015832767
MVG75-1201: RNCC: 3 | RNVC: 2
22KP440: RNCC: 5 | RNVC: 1

22 Mar 2010

3040-01-583-2719
Linear Actuating Cylinder Piston

015832719
MVG75-1109: RNCC: 3 | RNVC: 2
22KP426: RNCC: 5 | RNVC: 1

22 Mar 2010

3040-01-583-2713
Linear Actuating Cylinder Piston Rod

015832713
MVG75-1108: RNCC: 3 | RNVC: 2
22KP425: RNCC: 5 | RNVC: 1

22 Mar 2010

3040-01-583-2629
Linear Actuating Cylinder Piston

015832629
AVG75-1095: RNCC: 3 | RNVC: 2

22 Mar 2010

3040-01-583-2594
Linear Actuating Cylinder Piston Rod

015832594
MVG75-1087: RNCC: 3 | RNVC: 2
22KP407: RNCC: 5 | RNVC: 1

22 Mar 2010

3040-01-583-2587
Linear Actuating Cylinder Piston Rod

015832587
MVG75-1085: RNCC: 3 | RNVC: 2
22KP405: RNCC: 5 | RNVC: 1

22 Mar 2010

3040-01-583-1075
Linear Actuating Cylinder

015831075
MVG75-1098: RNCC: 3 | RNVC: 2
22KP417: RNCC: 5 | RNVC: 1

16 Mar 2010

3040-01-583-1064
Multiple Gears Gearshaft

015831064
MVG75-1061: RNCC: 3 | RNVC: 2
22KP397: RNCC: 5 | RNVC: 1

16 Mar 2010

3040-01-583-0671
Spur Gearshaft

015830671
MCG75-1214: RNCC: 3 | RNVC: 2

15 Mar 2010

3040-01-583-0291
Multiple Gears Gearshaft

015830291
MVG75-1046: RNCC: 3 | RNVC: 2
22KP386: RNCC: 5 | RNVC: 1

11 Mar 2010

3040-01-582-7196
Rigid Connecting Link

015827196
5150T91P01: RNCC: 3 | RNVC: 2
ALK02-4005: RNCC: 5 | RNVC: 9

3 Mar 2010

3040-01-582-3267
Housing Adapter

015823267
315-85-40: RNCC: 3 | RNVC: 2

17 Feb 2010

3040-01-582-3020
Shouldered Shaft

015823020
315-40-16: RNCC: 3 | RNVC: 2

16 Feb 2010

3040-01-580-4473
Rigid Connecting Link

015804473
2692888: RNCC: 3 | RNVC: 2

15 Dec 2009

3040-01-580-3935
Rigid Connecting Link

015803935
367060: RNCC: 3 | RNVC: 2

14 Dec 2009

3040-01-580-1052
Mechanical Drive Housing

015801052
3811875: RNCC: 3 | RNVC: 2
3811875: RNCC: 5 | RNVC: 9

4 Dec 2009

3040-01-579-8976
Linear Actuating Cylinder Head

015798976
1849843: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-579-8973
Linear Actuating Cylinder Assembly

015798973
616-5279: RNCC: 3 | RNVC: 2
2494116: RNCC: 5 | RNVC: 9
509-6993: RNCC: 5 | RNVC: 9

27 Nov 2009

3040-01-579-8970
Linear Actuating Cylinder Assembly

015798970
2621908: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-579-8950
Linear Actuating Cylinder

015798950
1317191: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-579-8907
Rigid Connecting Link

015798907
2956400: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-579-8904
Linear Actuating Cylinder Assembly

015798904
3261217: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-579-8895
Bell Crank

015798895
2721623: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-579-8391
Nonrotating Shaft Eye Bracket

015798391
2799658: RNCC: 3 | RNVC: 2

24 Nov 2009

3040-01-579-8390
Straight Shaft

015798390
1078375: RNCC: 3 | RNVC: 2

24 Nov 2009

3040-01-579-5439
Piston Ring

015795439
2233353: RNCC: 3 | RNVC: 2

16 Nov 2009

3040-01-579-1556
Mechanical Drive Housing

015791556
MT22R-1038: RNCC: 3 | RNVC: 2

2 Nov 2009

3040-01-578-9638
Rigid Connecting Link

015789638
6443357-01M1: RNCC: 3 | RNVC: 2
6443357-01M1: RNCC: 3 | RNVC: 9
6443357-01M1: RNCC: 5 | RNVC: 2

27 Oct 2009

3040-01-578-9546
Rigid Connecting Link

015789546
2513265: RNCC: 3 | RNVC: 2

26 Oct 2009

3040-01-578-8718
Mechanical Drive Housing Part

015788718
MT22-1181: RNCC: 3 | RNVC: 2

22 Oct 2009

3040-01-578-8704
Planetary Gears Carrier

015788704
MT22H-1200: RNCC: 3 | RNVC: 2

22 Oct 2009

3040-01-578-8702
Planetary Gears Carrier

015788702
MT22H-1161: RNCC: 3 | RNVC: 2

22 Oct 2009

3040-01-578-8697
Mechanical Drive Housing

015788697
MT22-1182: RNCC: 3 | RNVC: 2

22 Oct 2009

3040-01-578-2297
Linear Actuating Cylinder

015782297
1578-KK1-001: RNCC: 3 | RNVC: 2

30 Sep 2009

3040-01-578-2284
Rigid Connecting Link

015782284
1689110: RNCC: 3 | RNVC: 2

30 Sep 2009

3040-01-577-9874
Mechanically Actuated Spindle

015779874
885001013A01: RNCC: 3 | RNVC: 2
22185356: RNCC: 5 | RNVC: 2
7422185356: RNCC: 5 | RNVC: 2

23 Sep 2009

3040-01-577-9873
Shaft Idler

015779873
885001012A01: RNCC: 3 | RNVC: 2
22185347: RNCC: 5 | RNVC: 2
7422185347: RNCC: 5 | RNVC: 2

23 Sep 2009

3040-01-577-9569
Nonrotating Shaft Eye Bracket

015779569
2944521: RNCC: 3 | RNVC: 2

23 Sep 2009

3040-01-577-9543
Linear Actuating Cylinder Assembly

015779543
379-3505: RNCC: 3 | RNVC: 2
2692730: RNCC: 5 | RNVC: 9

23 Sep 2009

3040-01-577-9501
Linear Actuating Cylinder Assembly

015779501
2692728: RNCC: 3 | RNVC: 2

23 Sep 2009

3040-01-577-8690
Manual Control Lever

015778690
10015223: RNCC: 3 | RNVC: 2

21 Sep 2009

3040-01-577-6667
Rigid Connecting Link

015776667
2782220: RNCC: 3 | RNVC: 2

15 Sep 2009

3040-01-577-6643
Linear Actuating Cylinder Assembly

015776643
2692729: RNCC: 3 | RNVC: 2

15 Sep 2009

3040-01-577-6211
Helical Gear And Shaft Assembly

015776211
315-45-10: RNCC: 3 | RNVC: 2

14 Sep 2009

3040-01-576-5528
Shouldered Shaft

015765528
3290-D-1200: RNCC: 3 | RNVC: 2

5 Aug 2009

3040-01-570-6000
Extension Shaft

015706000
MT14-1118: RNCC: 3 | RNVC: 2

7 Jan 2009

3040-01-570-5379
Hub Clamp

015705379
1824-RR3-801027: RNCC: 3 | RNVC: 2
27-0059: RNCC: 5 | RNVC: 2

6 Jan 2009

3040-01-570-4450
Bevel Gear And Shaft Assembly

015704450
315-45-5: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-570-4270
Shouldered Shaft Assembly

015704270
315-003: RNCC: 3 | RNVC: 2

30 Dec 2008

3040-01-570-4235
Shouldered Shaft

015704235
RF22-1099: RNCC: 3 | RNVC: 2

30 Dec 2008

3040-01-570-4213
Shouldered Shaft

015704213
RF22-1073A: RNCC: 3 | RNVC: 2

30 Dec 2008

3040-01-569-2033
Linear Actuating Cylinder Assembly

015692033
604-9008: RNCC: 3 | RNVC: 2
262-7050: RNCC: 5 | RNVC: 9

21 Nov 2008

3040-01-568-7986
Nonaircraft Mechanical Actuator

015687986
205-6298: RNCC: 3 | RNVC: 2

10 Nov 2008

3040-01-566-9350
Shaft Collar

015669350
3107-U-1269: RNCC: 3 | RNVC: 2
2596999C1: RNCC: 5 | RNVC: 2

15 Sep 2008

3040-01-566-5911
Output T-Case Shaft

015665911
3297-G-1567: RNCC: 3 | RNVC: 2
2596997C1: RNCC: 5 | RNVC: 2

4 Sep 2008

3040-01-566-5885
Input Or Main Shaft

015665885
KIT 2591: RNCC: 3 | RNVC: 2
3297-J-1544: RNCC: 5 | RNVC: 2

4 Sep 2008

3040-01-566-5865
Output T-Case Shaft

015665865
3297-V-1452: RNCC: 3 | RNVC: 2
2508290C1: RNCC: 5 | RNVC: 2

4 Sep 2008

3040-01-566-5859
Shifter Shaft

015665859
2244-T-1190: RNCC: 3 | RNVC: 2
2508278C1: RNCC: 5 | RNVC: 2

4 Sep 2008

3040-01-564-7511
Linear Actuating Cylinder Assembly

015647511
C300116: RNCC: 3 | RNVC: 2

26 Jun 2008

3040-01-564-2366
Control Cam

015642366
16875-58L-75: RNCC: 3 | RNVC: 2

10 Jun 2008

3040-01-563-9910
Extension Shaft

015639910
417LTH1655: RNCC: 3 | RNVC: 2

2 Jun 2008

3040-01-562-9540
Nonrotating Shaft Eye Bracket

015629540
4931017: RNCC: 3 | RNVC: 2
4931017: RNCC: 5 | RNVC: 2
332/H8464: RNCC: 5 | RNVC: 2

28 Apr 2008

3040-01-560-4698
Shaft Retaining Plate

015604698
0223 3310: RNCC: 3 | RNVC: 2

31 Jan 2008

3040-01-558-4479
Rigid Connecting Link

015584479
3513150: RNCC: 3 | RNVC: 2
3513150: RNCC: 5 | RNVC: 9

9 Nov 2007

3040-01-558-0998
Mechanical Drive Housing

015580998
MT17-1127: RNCC: 3 | RNVC: 2

1 Nov 2007

3040-01-557-6607
Shouldered Shaft

015576607
2003475: RNCC: 3 | RNVC: 2
0703-PP2-567: RNCC: 5 | RNVC: 2

25 Oct 2007

3040-01-557-6553
Shouldered Shaft

015576553
2003474: RNCC: 3 | RNVC: 2

25 Oct 2007

3040-01-556-4774
Nonrotating Shaft Eye Bracket

015564774
A-333-P-4228: RNCC: 3 | RNVC: 2
A333P4228: RNCC: 5 | RNVC: 2

3 Oct 2007

3040-01-556-4594
Mechanical Drive Housing

015564594
A3 3235E2111: RNCC: 3 | RNVC: 2
1681805C91: RNCC: 5 | RNVC: 2

3 Oct 2007

3040-01-556-1098
Shouldered Shaft

015561098
115242-1: RNCC: 3 | RNVC: 2

24 Sep 2007

3040-01-555-6712
Shouldered Shaft

015556712
A40300030 USA: RNCC: 3 | RNVC: 2

11 Sep 2007

3040-01-555-5732
Flexible Core End Fitting

015555732
3698216: RNCC: 3 | RNVC: 2
3698216: RNCC: 5 | RNVC: 9

7 Sep 2007

3040-01-555-5682
Throttle Control

015555682
3698115: RNCC: 3 | RNVC: 2
3698115: RNCC: 5 | RNVC: 9

7 Sep 2007

3040-01-554-0332
Rigid Connecting Link

015540332
47073412: RNCC: 3 | RNVC: 2
47073412: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-0189
Linear Actuating Cylinder Assembly

015540189
99789573: RNCC: 3 | RNVC: 2
99789573: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-0078
Hydraulic Accumulator

015540078
27475512: RNCC: 3 | RNVC: 2

27 Jul 2007

3040-01-553-9034
Linear Actuating Cylinder

015539034
19571512: RNCC: 3 | RNVC: 2
19571512: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-553-8901
Linear Actuating Cylinder Assembly

015538901
02222612: RNCC: 3 | RNVC: 2

27 Jul 2007

3040-01-553-7570
Winch Drive

015537570
43067912: RNCC: 3 | RNVC: 2
43067912: RNCC: 5 | RNVC: 9

25 Jul 2007

3040-01-553-3116
Pivot Shaft Assembly

015533116
3006790: RNCC: 3 | RNVC: 2

12 Jul 2007

3040-01-553-1213
Spare Swing Arm

015531213
3006885: RNCC: 3 | RNVC: 2

9 Jul 2007

3040-01-552-7014
Linear Actuating Cylinder Assembly

015527014
19586912: RNCC: 3 | RNVC: 2
19586912: RNCC: 5 | RNVC: 9

21 Jun 2007

3040-01-552-0093
Counterbalance Weight

015520093
38150-09424-106: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-551-4667
Spur Gearshaft

015514667
3117N001: RNCC: 3 | RNVC: 2

17 May 2007

3040-01-551-2682
Rotary Actuating Cylinder Assembly

015512682
9230A6323: RNCC: 3 | RNVC: 2
B001ARM92: RNCC: 5 | RNVC: 2

11 May 2007

3040-01-550-6983
Detent Kit

015506983
412858: RNCC: 3 | RNVC: 2
412858: RNCC: 5 | RNVC: 9

26 Apr 2007

3040-01-549-1848
Worm Wheel Gearshaft

015491848
16D33-W: RNCC: 3 | RNVC: 9
16D33-UW: RNCC: 5 | RNVC: 9

14 Mar 2007

3040-01-548-4651
Body Hub

015484651
A88401557: RNCC: 3 | RNVC: 2
SA88401557: RNCC: 5 | RNVC: 9

23 Feb 2007

3040-01-548-0060
Mechanical Drive Housing

015480060
RF921083: RNCC: 3 | RNVC: 2

6 Feb 2007

3040-01-548-0056
Mechanical Drive Housing

015480056
R921034: RNCC: 3 | RNVC: 2

6 Feb 2007

3040-01-548-0053
Mechanical Drive Housing

015480053
MT92-1161: RNCC: 3 | RNVC: 2
1002534: RNCC: 5 | RNVC: 2

6 Feb 2007

3040-01-548-0030
Mechanical Drive Housing

015480030
MT92-1049: RNCC: 3 | RNVC: 2

6 Feb 2007

3040-01-547-9974
Brake Drum

015479974
MT92-1016: RNCC: 3 | RNVC: 2

6 Feb 2007

3040-01-547-8910
Rigid Connecting Link

015478910
64564: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-547-8908
Band Type Brake

015478908
71712: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-547-6194
Spur Gearshaft

015476194
25093514: RNCC: 3 | RNVC: 2
607KC345A: RNCC: 5 | RNVC: 2
10026240: RNCC: 5 | RNVC: 9
607KC345A: RNCC: 5 | RNVC: 9

26 Jan 2007

3040-01-547-5023
Spur Gearshaft

015475023
25111790: RNCC: 3 | RNVC: 2
25111790: RNCC: 5 | RNVC: 2
10026236: RNCC: 5 | RNVC: 9
607KC221: RNCC: 5 | RNVC: 9
607KC221: RNCC: 5 | RNVC: 9

23 Jan 2007

3040-01-547-4860
Shaft Idler

015474860
1820301C1: RNCC: 3 | RNVC: 2
1820301C1: RNCC: 5 | RNVC: 9

23 Jan 2007

3040-01-546-9216
Spur Gearshaft

015469216
25110667: RNCC: 3 | RNVC: 2
615KC465: RNCC: 5 | RNVC: 2
10026221: RNCC: 5 | RNVC: 9
615KC465: RNCC: 5 | RNVC: 9

9 Jan 2007

3040-01-546-0250
Linear Actuating Cylinder Assembly

015460250
1903085: RNCC: 3 | RNVC: 2

4 Dec 2006

3040-01-544-4095
Linear Actuating Cylinder Assembly

015444095
2533263: RNCC: 3 | RNVC: 2

12 Oct 2006

3040-01-543-7796
Body Hub

015437796
2829861: RNCC: 3 | RNVC: 2

21 Sep 2006

3040-01-543-6986
Straight Shaft Assembly

015436986
20706478: RNCC: 3 | RNVC: 2
453GC431AM: RNCC: 5 | RNVC: 9
10025936: RNCC: 5 | RNVC: 9

20 Sep 2006

3040-01-543-6747
Shouldered Shaft

015436747
8978-035-00B: RNCC: 3 | RNVC: 2

19 Sep 2006

3040-01-543-2873
Pivot Shaft Assembly

015432873
397-40-1: RNCC: 3 | RNVC: 2

7 Sep 2006

3040-01-543-1085
Linear Actuating Cylinder Piston

015431085
306-85-24: RNCC: 3 | RNVC: 2
1000556: RNCC: 5 | RNVC: 1

30 Aug 2006

3040-01-543-0968
Linear Actuating Cylinder Assembly

015430968
306-85-31: RNCC: 3 | RNVC: 2
1000555: RNCC: 5 | RNVC: 2

29 Aug 2006

3040-01-542-8384
Shouldered Shaft

015428384
315-40-14: RNCC: 3 | RNVC: 2

21 Aug 2006

3040-01-542-8379
Shaft Collar

015428379
306-35-3: RNCC: 3 | RNVC: 2

21 Aug 2006

3040-01-542-8081
Shouldered Shaft

015428081
5/8-16X1LGSHCS: RNCC: 3 | RNVC: 9

18 Aug 2006

3040-01-542-2659
Rigid Connecting Link

015422659
1518601: RNCC: 3 | RNVC: 2
10003153: RNCC: 3 | RNVC: 2
1518601: RNCC: 3 | RNVC: 9
1000793: RNCC: 5 | RNVC: 9

27 Jul 2006

3040-01-542-2572
Rigid Connecting Link

015422572
TK7424: RNCC: 3 | RNVC: 9
1000979: RNCC: 5 | RNVC: 2
TK7424: RNCC: 5 | RNVC: 9

27 Jul 2006

3040-01-541-7341
Straight Shaft

015417341
M2945-019: RNCC: 3 | RNVC: 2

10 Jul 2006

3040-01-541-2592
Belt-Chain Tension Adjusting Device

015412592
220-1210: RNCC: 3 | RNVC: 2

21 Jun 2006

3040-01-541-0906
Tra Adaptor

015410906
2270-MM5-001: RNCC: 3 | RNVC: 2
2270-MM5-001: RNCC: 5 | RNVC: 9
2270-MM5-001: RNCC: 5 | RNVC: 9

14 Jun 2006

3040-01-540-9321
Mechanical Drive Housing

015409321
TAS853001K6: RNCC: 3 | RNVC: 2

8 Jun 2006

3040-01-540-7586
Worm Shaft

015407586
TAS853001J7: RNCC: 3 | RNVC: 2

1 Jun 2006

3040-01-539-9471
Ball Joint Head

015399471
MT10-1129: RNCC: 3 | RNVC: 2
3001946: RNCC: 5 | RNVC: 9

4 May 2006

3040-01-530-9136
Transmission Sleeve

015309136
E5260: RNCC: 3 | RNVC: 2
E5260: RNCC: 5 | RNVC: 2
88850140: RNCC: 5 | RNVC: 2
7488850140: RNCC: 5 | RNVC: 2
R5260: RNCC: 5 | RNVC: 2
52231-000: RNCC: 5 | RNVC: 2
5260: RNCC: 5 | RNVC: 9
88850140: RNCC: 5 | RNVC: 9
E5260-CD: RNCC: D | RNVC: 9
E5260-CD: RNCC: D | RNVC: 9

16 Jun 2005

3040-01-529-2022
Multiple Gears Gearshaft

015292022
MT23 1057: RNCC: 3 | RNVC: 2

7 Apr 2005

3040-01-529-1899
Multiple Gears Gearshaft

015291899
MT92 1057: RNCC: 3 | RNVC: 2

7 Apr 2005

3040-01-529-1136
Shouldered Shaft

015291136
190-3968: RNCC: 3 | RNVC: 2

5 Apr 2005

3040-01-529-0627
Thrust Collar

015290627
11581628: RNCC: 3 | RNVC: 2

1 Apr 2005

3040-01-528-4268
Shouldered Shaft

015284268
P10385: RNCC: 3 | RNVC: 2

12 Mar 2005

3040-01-528-4256
Shouldered Shaft

015284256
228502M: RNCC: 3 | RNVC: 2

12 Mar 2005

3040-01-528-4214
Shouldered Shaft

015284214
11581676: RNCC: 3 | RNVC: 2

11 Mar 2005

3040-01-528-3880
Body Hub

015283880
R22 1011: RNCC: 3 | RNVC: 2

10 Mar 2005

3040-01-528-3282
Body Hub

015283282
MTL17 1028: RNCC: 3 | RNVC: 2

9 Mar 2005

3040-01-528-3279
Shouldered Shaft

015283279
PX11544A: RNCC: 3 | RNVC: 2

9 Mar 2005

3040-01-526-9102
Body Hub

015269102
33592: RNCC: 3 | RNVC: 2
C33592: RNCC: 5 | RNVC: 9

12 Jan 2005

3040-01-525-8023
Control Cam

015258023
2135472: RNCC: 3 | RNVC: 2

24 Nov 2004

3040-01-525-4484
Straight Shaft

015254484
212-8180: RNCC: 3 | RNVC: 2

9 Nov 2004

3040-01-524-7752
Straight Axle

015247752
4KK574: RNCC: 3 | RNVC: 2
4KK574: RNCC: 3 | RNVC: 9
370-6184: RNCC: 5 | RNVC: 2

15 Oct 2004

3040-01-522-8084
Rigid Connecting Link

015228084
12485188: RNCC: 3 | RNVC: 2
12485188: RNCC: 5 | RNVC: 2

12 Aug 2004

3040-01-517-7818
Flexible Drive Shaft

015177818
465-5079: RNCC: 3 | RNVC: 2
465-5079: RNCC: 3 | RNVC: 9
465-5079: RNCC: 5 | RNVC: 2
3040PL1812495: RNCC: 6 | RNVC: 9

19 Feb 2004

3040-01-517-7813
Timing Release Rod

015177813
465-5253: RNCC: 3 | RNVC: 2
465-5253: RNCC: 3 | RNVC: 9
465-5253: RNCC: 5 | RNVC: 2
465-5253: RNCC: 5 | RNVC: 2
3040PL1812498: RNCC: 6 | RNVC: 9

19 Feb 2004

3040-01-517-4025
Efv Driveshaft

015174025
465-4302: RNCC: 3 | RNVC: 2
465-4302: RNCC: 3 | RNVC: 9
465-4302-7: RNCC: 5 | RNVC: 2
3040PL1037716: RNCC: 6 | RNVC: 9

6 Feb 2004

3040-01-517-2919
Manual Control Lever Assembly

015172919
8I1309: RNCC: 3 | RNVC: 2

4 Feb 2004

3040-01-517-1078
Shouldered Shaft

015171078
1KK221: RNCC: 3 | RNVC: 2
1KK221: RNCC: 3 | RNVC: 9
6509620: RNCC: 5 | RNVC: 9

29 Jan 2004

3040-01-517-0213
Shouldered Shaft

015170213
3046681: RNCC: 3 | RNVC: 2

28 Jan 2004

3040-01-516-1829
Drive Adapter

015161829
4182009: RNCC: 1 | RNVC: 2
30329: RNCC: 3 | RNVC: 2

22 Dec 2003

3040-01-515-8010
Manual Control Lever Assembly

015158010
2T3275: RNCC: 3 | RNVC: 2

9 Dec 2003

3040-01-515-7593
Manual Control Lever Assembly

015157593
2T3287: RNCC: 3 | RNVC: 2

8 Dec 2003

3040-01-515-3070
Link Connecting

015153070
5T1815: RNCC: 3 | RNVC: 2

20 Nov 2003

3040-01-515-3040
Pneumatic Actuator Cylinder Housing

015153040
8W4856: RNCC: 3 | RNVC: 2

20 Nov 2003

3040-01-515-0839
Mechanical Drive Housing Part

015150839
3256872: RNCC: 3 | RNVC: 2
3256872: RNCC: 5 | RNVC: 9

14 Nov 2003

3040-01-514-1733
Straight Shaft

015141733
2T1748: RNCC: 3 | RNVC: 2

20 Oct 2003

3040-01-513-4828
Hub Clamp

015134828
529208-80: RNCC: 3 | RNVC: 2

26 Sep 2003

3040-01-511-6526
Shouldered Shaft

015116526
13541561: RNCC: 3 | RNVC: 2
13541561: RNCC: 5 | RNVC: 2
13541561: RNCC: 5 | RNVC: 2
12485629: RNCC: D | RNVC: 9

13 Aug 2003

3040-01-509-6021
Remote Control Lever And Shaft

015096021
61124: RNCC: 3 | RNVC: 2

26 Jun 2003

3040-01-505-6941
Straight Axle

015056941
9R-9812: RNCC: 3 | RNVC: 2

12 Mar 2003

3040-01-505-6476
Linear Actuating Cylinder Assembly

015056476
6E-3691: RNCC: 3 | RNVC: 2

12 Mar 2003

3040-01-504-9679
Mechanical Drive Housing Part

015049679
7579006-021: RNCC: 3 | RNVC: 9
7579006-021: RNCC: 5 | RNVC: 2

14 Feb 2003

3040-01-504-7426
Shouldered Shaft

015047426
16006MS: RNCC: 3 | RNVC: 2

7 Feb 2003

3040-01-502-9794
Straight Shaft

015029794
LG0094-3275: RNCC: 3 | RNVC: 2
LG0094: RNCC: D | RNVC: 9

27 Nov 2002

3040-01-498-0918
Shaft Collar

014980918
3591522: RNCC: 3 | RNVC: 2
3519623: RNCC: 5 | RNVC: 2

13 Jun 2002

3040-01-497-0648
Shouldered Shaft

014970648
29501543: RNCC: 3 | RNVC: 2
22KP538: RNCC: 5 | RNVC: 1

8 May 2002

3040-01-495-1374
Mechanical Drive Housing

014951374
983-WH11-402: RNCC: 3 | RNVC: 2

7 Mar 2002

3040-01-492-6039
Shouldered Shaft Assembly

014926039
12460595: RNCC: 3 | RNVC: 2

5 Dec 2001

3040-01-489-5406
Housing Adapter

014895406
GG-006: RNCC: 3 | RNVC: 2

17 Sep 2001

3040-01-488-5610
Control Cam

014885610
3417645: RNCC: 3 | RNVC: 2

28 Aug 2001

3040-01-485-1922
Shouldered Shaft

014851922
143120G2: RNCC: 3 | RNVC: 2
143120G2: RNCC: 5 | RNVC: 9

18 May 2001

3040-01-484-6624
Shaft Idler

014846624
3026167: RNCC: 3 | RNVC: 2

3 May 2001

3040-01-484-6170
Shaft Idler

014846170
3062904: RNCC: 3 | RNVC: 2

2 May 2001

3040-01-483-1166
Manual Control Lever

014831166
12367266: RNCC: 3 | RNVC: 2

16 Mar 2001

3040-01-483-0146
Bevel Gear And Shaft Assembly

014830146
16101557-011: RNCC: 3 | RNVC: 2
16101557-011: RNCC: 3 | RNVC: 2
16101557-011: RNCC: 5 | RNVC: 2

13 Mar 2001

3040-01-482-5405
Rigid Connecting Link

014825405
12474758-1: RNCC: 3 | RNVC: 2

27 Feb 2001

3040-01-481-8226
Rigid Connecting Link

014818226
12474758-2: RNCC: 3 | RNVC: 2

26 Jan 2001

3040-01-481-2442
Detent Plate

014812442
3219784: RNCC: 3 | RNVC: 1
3219784-1: RNCC: 3 | RNVC: 2

26 Dec 2000

3040-01-481-2440
Detent Plate

014812440
3258657: RNCC: 3 | RNVC: 1
3258657-1: RNCC: 3 | RNVC: 2
3258657-1: RNCC: 3 | RNVC: 9
3258657-1: RNCC: 5 | RNVC: 9
3258657-1: RNCC: 5 | RNVC: 9
3258657-1: RNCC: 5 | RNVC: 9

26 Dec 2000

3040-01-481-2441
Detent Plate

014812441
3220857: RNCC: 3 | RNVC: 1
3220857-1: RNCC: 3 | RNVC: 2

26 Dec 2000

3040-01-479-8370
Linear Actuating Cylinder Piston Rod

014798370
6-768-100025: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-479-3323
Manual Control Lever

014793323
EP-0003497: RNCC: 3 | RNVC: 2
920476.008: RNCC: 3 | RNVC: 2
920476.008: RNCC: 5 | RNVC: 2
920476008: RNCC: 5 | RNVC: 9

18 Oct 2000

3040-01-479-2317
Push-Pull Control Assembly

014792317
923899.019: RNCC: 3 | RNVC: 2
923899.0190: RNCC: 5 | RNVC: 2
9238990190: RNCC: 5 | RNVC: 9

16 Oct 2000

3040-01-478-2032
Straight Shaft

014782032
602231: RNCC: 3 | RNVC: 2
260095: RNCC: 5 | RNVC: 9

31 Aug 2000

3040-01-477-4367
Mechanical Drive Housing

014774367
140-8267: RNCC: 3 | RNVC: 2

9 Aug 2000

3040-01-477-4340
Mechanical Drive Housing

014774340
140-8266: RNCC: 3 | RNVC: 2
140-8266: RNCC: 5 | RNVC: 9

9 Aug 2000

3040-01-477-0826
Linear Actuating Cylinder

014770826
634-6570: RNCC: 3 | RNVC: 2
7R-7638: RNCC: 3 | RNVC: 9

31 Jul 2000

3040-01-477-0795
Linear Actuating Cylinder

014770795
634-6571: RNCC: 3 | RNVC: 2
109-6705: RNCC: 3 | RNVC: 9

31 Jul 2000

3040-01-477-0228
Hub Clamp

014770228
692507: RNCC: 3 | RNVC: 2

28 Jul 2000

3040-01-475-3567
Rigid Connecting Link

014753567
11E422040: RNCC: 3 | RNVC: 2
RIA148788: RNCC: 5 | RNVC: 9

1 Jun 2000

3040-01-475-2685
Remote Control Lever

014752685
12997788: RNCC: 3 | RNVC: 2
10768: RNCC: 5 | RNVC: 2
717124414305: RNCC: 5 | RNVC: 9
3040PL0912275: RNCC: 6 | RNVC: 9

26 May 2000

3040-01-474-5425
Shouldered Shaft

014745425
140-1321: RNCC: 3 | RNVC: 2

5 May 2000

3040-01-474-5382
Mechanical Drive Housing

014745382
139-3178: RNCC: 3 | RNVC: 2

5 May 2000

3040-01-474-2384
Linear Actuating Cylinder Assembly Parts Kit

014742384
163-6513: RNCC: 3 | RNVC: 2

28 Apr 2000

3040-01-474-2096
Rigid Connecting Link

014742096
3040FL11125: RNCC: 3 | RNVC: 2
149-4180: RNCC: 5 | RNVC: 2

27 Apr 2000

3040-01-474-2071
Shouldered Shaft

014742071
178-1149: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-1905
Flexible Shaft Assembly

014741905
155-4850: RNCC: 3 | RNVC: 2
155-4850: RNCC: 5 | RNVC: 9

27 Apr 2000

3040-01-474-1901
Ball Joint

014741901
119-7018: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-1894
Planetary Gears Carrier

014741894
151-7509: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-1734
Body Hub

014741734
6R-4385: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-473-8642
Linear Actuating Cylinder Cap

014738642
1022645: RNCC: 3 | RNVC: 9
AT181791: RNCC: 5 | RNVC: 9

18 Apr 2000

3040-01-473-4383
Straight Shaft

014734383
L1-0122: RNCC: 3 | RNVC: 2
99-1449: RNCC: 5 | RNVC: 1

10 Apr 2000

3040-01-473-3081
Helical Gear And Shaft Assembly

014733081
94550: RNCC: 3 | RNVC: 2
00-0241: RNCC: 5 | RNVC: 1

4 Apr 2000

3040-01-473-2850
Straight Shaft Assembly

014732850
3003002: RNCC: 3 | RNVC: 2
00-0223: RNCC: 5 | RNVC: 1

3 Apr 2000

3040-01-471-4888
Counterbalance Weight

014714888
6I-0501: RNCC: 3 | RNVC: 2

3 Feb 2000

3040-01-466-0005
Linear Actuating Cylinder Piston

014660005
8D00051-7: RNCC: 3 | RNVC: 2
8D00051-7: RNCC: 5 | RNVC: 9

30 Jun 1999

3040-01-466-0004
Linear Actuating Cylinder Piston

014660004
8D00152-8: RNCC: 3 | RNVC: 2
8D00152-8: RNCC: 5 | RNVC: 9

30 Jun 1999

3040-01-460-6650
Nonrotating Shaft Eye Bracket

014606650
LSCP580055: RNCC: 3 | RNVC: 2

12 Nov 1998

3040-01-457-3066
Remote Control Lever

014573066
4W-0687: RNCC: 3 | RNVC: 2
4W-0687: RNCC: 5 | RNVC: 2
4W-0687: RNCC: 5 | RNVC: 2
4P-7028 IT 8: RNCC: 5 | RNVC: 2

18 Jul 1998

3040-01-451-6042
Shouldered Shaft

014516042
8433-000: RNCC: 3 | RNVC: 2
162X75497: RNCC: 5 | RNVC: 2
2GK307: RNCC: 5 | RNVC: 2
8433-000: RNCC: 5 | RNVC: 2
2GK307: RNCC: 5 | RNVC: 9

22 Dec 1997

NSN 3040-01-451-5851 014515851 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-01-451-5851
Linear Actuating Cylinder Assembly

014515851
12940952: RNCC: 1 | RNVC: 2
RC2514: RNCC: 3 | RNVC: 2

21 Dec 1997

3040-01-448-1190
Manual Control Lever Assembly

014481190
990032-901: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1
999-0032-901: RNCC: 5 | RNVC: 2
LL-H47-0351: RNCC: 5 | RNVC: 9

21 Aug 1997

3040-01-446-8500
Manual Control Lever Assembly

014468500
062680: RNCC: 3 | RNVC: 9
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H44-7473: RNCC: 5 | RNVC: 9

18 Jul 1997

3040-01-446-8476
Manual Control Lever Assembly

014468476
062679: RNCC: 3 | RNVC: 9
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H44-7474: RNCC: 5 | RNVC: 9

18 Jul 1997

3040-01-446-8071
Linear Actuating Cylinder Assembly

014468071
062910: RNCC: 3 | RNVC: 9
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H44-7477: RNCC: 5 | RNVC: 9

17 Jul 1997

3040-01-446-8034
Control Cable Assembly

014468034
062748: RNCC: 3 | RNVC: 9
REPAIR PARTT: RNCC: 5 | RNVC: 1
LL-H44-7470: RNCC: 5 | RNVC: 9

17 Jul 1997

3040-01-446-7992
Control Pedal Assembly

014467992
051550: RNCC: 3 | RNVC: 9
LL-H44-7467: RNCC: 5 | RNVC: 9

17 Jul 1997

3040-01-446-8003
Rigid Connecting Link

014468003
062906: RNCC: 3 | RNVC: 9
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H44-7468: RNCC: 5 | RNVC: 9

17 Jul 1997

3040-01-446-7981
Manual Control Lever Assembly

014467981
062681: RNCC: 3 | RNVC: 9
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H44-7465: RNCC: 5 | RNVC: 9

17 Jul 1997

3040-01-446-7988
Manual Control Lever Assembly

014467988
062682: RNCC: 3 | RNVC: 9
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H44-7466: RNCC: 5 | RNVC: 9

17 Jul 1997

3040-01-446-7208
Rotary Actuating Cylinder Assembly

014467208
062672: RNCC: 3 | RNVC: 9
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H44-7463: RNCC: 5 | RNVC: 9

15 Jul 1997

3040-01-446-7183
Disk Brake Shoe Set

014467183
ABCDEF: RNCC: 3 | RNVC: 9
REPAIR PART: RNCC: 5 | RNVC: 1

15 Jul 1997

3040-01-446-4652
Rigid Connecting Link

014464652
95000162: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H44-4892: RNCC: 5 | RNVC: 9
95000162: RNCC: 5 | RNVC: 9

3 Jul 1997

3040-01-445-8415
Flexible Shaft Assembly

014458415
41958: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H47-6398: RNCC: 5 | RNVC: 9

13 Jun 1997

3040-01-445-7848
Pawl

014457848
40899: RNCC: 3 | RNVC: 2
REPAIR PART: RNCC: 5 | RNVC: 1
LL-H47-6410: RNCC: 5 | RNVC: 9

12 Jun 1997

3040-01-445-5952
Remote Control Lever

014455952
12366494: RNCC: 3 | RNVC: 2
12366494: RNCC: 5 | RNVC: 2
12366494: RNCC: 5 | RNVC: 2

6 Jun 1997

3040-01-444-1756
Mechanical Drive Housing

014441756
64325: RNCC: 3 | RNVC: 2
31296: RNCC: 5 | RNVC: 9
31296: RNCC: 5 | RNVC: 9
34384: RNCC: 5 | RNVC: 9
34384: RNCC: 5 | RNVC: 9
3040PL0837557: RNCC: 6 | RNVC: 9

30 Apr 1997

3040-01-444-0349
Rigid Connecting Link

014440349
150-1361: RNCC: 3 | RNVC: 2

25 Apr 1997

3040-01-443-5254
Mechanical Drive Housing

014435254
106-7149: RNCC: 3 | RNVC: 2
106-7149: RNCC: 5 | RNVC: 2
106-7149: RNCC: 5 | RNVC: 2
106-7149: RNCC: 5 | RNVC: 2
106-7149: RNCC: 5 | RNVC: 9

11 Apr 1997

3040-01-443-0673
Body Hub

014430673
23016722: RNCC: 3 | RNVC: 2

31 Mar 1997

3040-01-442-3392
Extension Rod

014423392
B6904-1: RNCC: 3 | RNVC: 2
6904-1: RNCC: 5 | RNVC: 2

12 Mar 1997

3040-01-441-2376
Shaft Collar

014412376
3532217: RNCC: 3 | RNVC: 2

6 Feb 1997

3040-01-440-2358
Flexible Control Casing

014402358
GA176: RNCC: 3 | RNVC: 2

8 Jan 1997

3040-01-439-5484
Mechanical Drive Housing

014395484
29514801: RNCC: 3 | RNVC: 9
29514801: RNCC: 5 | RNVC: 9
2954337: RNCC: 5 | RNVC: 9

11 Dec 1996

3040-01-439-3814
Rigid Connecting Link

014393814
32873: RNCC: 3 | RNVC: 2

6 Dec 1996

3040-01-439-3799
Rigid Connecting Link

014393799
20566: RNCC: 3 | RNVC: 2

6 Dec 1996

3040-01-438-8118
Straight Axle

014388118
277-7089: RNCC: 3 | RNVC: 2
4W0250: RNCC: 5 | RNVC: 9

20 Nov 1996

3040-01-437-8315
Shaft Collar

014378315
SC3040-0011-1: RNCC: 3 | RNVC: 9
6436K23: RNCC: 5 | RNVC: 2
SC3040-0011: RNCC: 7 | RNVC: 9

24 Oct 1996

3040-01-437-5635
Rigid Connecting Link

014375635
9523M35G03: RNCC: 3 | RNVC: 2
9523M35G03: RNCC: 5 | RNVC: 2
9523M35G03: RNCC: 5 | RNVC: 9

17 Oct 1996

3040-01-437-4298
Actuator Bracket

014374298
81-704: RNCC: 3 | RNVC: 2

11 Oct 1996

3040-01-435-2837
Manual Control Lever Assembly

014352837
1091503: RNCC: 3 | RNVC: 2

20 Aug 1996

3040-01-434-2406
Manual Control Lever

014342406
306E64F2: RNCC: 3 | RNVC: 2

24 Jul 1996

3040-01-430-3428
Shouldered Axle

014303428
7W4137: RNCC: 3 | RNVC: 2

26 Apr 1996

3040-01-429-3327
Shouldered Shaft Assembly

014293327
1011366: RNCC: 3 | RNVC: 2

9 Apr 1996

3040-01-429-3289
Linear Actuating Cylinder

014293289
8D00234-4: RNCC: 3 | RNVC: 2
8D00234-4: RNCC: 5 | RNVC: 9

9 Apr 1996

3040-01-429-3287
Linear Actuating Cylinder Piston Rod

014293287
8D00234-6: RNCC: 3 | RNVC: 2
8D00234-6: RNCC: 5 | RNVC: 9

9 Apr 1996

3040-01-429-0821
Straight Axle

014290821
4P-7738: RNCC: 3 | RNVC: 2

4 Apr 1996

3040-01-424-2576
Rigid Connecting Link

014242576
AT102996: RNCC: 3 | RNVC: 2

24 Jan 1996

3040-01-421-5533
Ste Cam Drive Motor

014215533
63858: RNCC: 3 | RNVC: 2
LLH379241: RNCC: 5 | RNVC: 1
NAVY 1993 3142: RNCC: 5 | RNVC: 1

9 Nov 1995

3040-01-421-5414
Foot Pedal Assembly

014215414
A80853300A: RNCC: 3 | RNVC: 2
LLH372572: RNCC: 5 | RNVC: 1
NAVY 1993 3019: RNCC: 5 | RNVC: 1

9 Nov 1995

3040-01-421-4649
Body Hub

014214649
S600640: RNCC: 3 | RNVC: 2
600156: RNCC: 5 | RNVC: 9

8 Nov 1995

3040-01-420-9855
Linear Actuating Cylinder Assembly

014209855
8D00193-1: RNCC: 3 | RNVC: 2
8D00193-1: RNCC: 5 | RNVC: 9

30 Oct 1995

3040-01-418-4576
Linear Actuating Cylinder

014184576
8D00234-7: RNCC: 3 | RNVC: 2
062000142: RNCC: 5 | RNVC: 2

28 Aug 1995

3040-01-418-4572
Linear Actuating Cylinder

014184572
8D00235-4: RNCC: 3 | RNVC: 2
8D00235-4: RNCC: 5 | RNVC: 9

28 Aug 1995

3040-01-418-4574
Linear Actuating Cylinder Head

014184574
8D00235-23: RNCC: 3 | RNVC: 2
8D00235-23: RNCC: 5 | RNVC: 9

28 Aug 1995

3040-01-418-3102
Piston Rod Ring

014183102
8D00234-22: RNCC: 3 | RNVC: 2
8D00234-22: RNCC: 5 | RNVC: 9

24 Aug 1995

3040-01-418-3026
Linear Actuating Cylinder Piston Rod

014183026
8D00235-11: RNCC: 3 | RNVC: 2
8D00235-11: RNCC: 5 | RNVC: 9

24 Aug 1995

3040-01-418-3031
Piston Rod Ring

014183031
8D00234-23: RNCC: 3 | RNVC: 2
8D00234-23: RNCC: 5 | RNVC: 9

24 Aug 1995

3040-01-418-1846
Piston Rod Ring

014181846
8D00234-21: RNCC: 3 | RNVC: 2
8D00234-21: RNCC: 5 | RNVC: 9

22 Aug 1995

3040-01-418-1734
Linear Actuating Cylinder Piston

014181734
8D00235-17: RNCC: 3 | RNVC: 2
8D00235-17: RNCC: 5 | RNVC: 9

22 Aug 1995

3040-01-418-1718
Piston Rod Ring

014181718
8D00235-24: RNCC: 3 | RNVC: 2
8D00235-24: RNCC: 5 | RNVC: 9

22 Aug 1995

3040-01-417-9823
Linear Actuating Cylinder Assembly

014179823
8D00191-1: RNCC: 3 | RNVC: 2
8D00191-1: RNCC: 5 | RNVC: 9
8D00191: RNCC: D | RNVC: 9

18 Aug 1995

3040-01-415-8388
Shouldered Shaft

014158388
70351-08131-048: RNCC: 3 | RNVC: 2
70351-08131: RNCC: D | RNVC: 9
70351-08131-044: RNCC: E | RNVC: 8
70351-08131-045: RNCC: E | RNVC: 8

7 Jul 1995

3040-01-414-2266
Extension Shaft

014142266
384-1175-00: RNCC: 3 | RNVC: 2

3 Jun 1995

3040-01-412-9559
Straight Shaft

014129559
12364694: RNCC: 3 | RNVC: 2
12364694: RNCC: 5 | RNVC: 2
12364694: RNCC: 5 | RNVC: 2

3 May 1995

3040-01-411-9117
Straight Shaft Assembly

014119117
557-0126-00: RNCC: 3 | RNVC: 2
LL-H37-0646: RNCC: 5 | RNVC: 1
REPAIR PART: RNCC: 5 | RNVC: 1

5 Apr 1995

3040-01-411-8473
Shouldered Shaft

014118473
12364824: RNCC: 3 | RNVC: 2
12364824: RNCC: 5 | RNVC: 2
12364824: RNCC: 5 | RNVC: 2

3 Apr 1995

3040-01-411-3180
Release Rod

014113180
AT117060: RNCC: 3 | RNVC: 2
AT117060: RNCC: 5 | RNVC: 9

22 Mar 1995

3040-01-409-0006
Rigid Connecting Link

014090006
13230E3631: RNCC: 3 | RNVC: 2
BS.2827.08.00: RNCC: 5 | RNVC: 2

3 Mar 1995

3040-01-408-5698
Hub Clamp

014085698
RE40048: RNCC: 3 | RNVC: 2
RE40048: RNCC: 5 | RNVC: 2
RE40048: RNCC: 5 | RNVC: 2
RE40048: RNCC: 5 | RNVC: 9
RE40048: RNCC: 5 | RNVC: 9

21 Feb 1995

3040-01-393-5275
Rigid Connecting Link

013935275
8D00082-20: RNCC: 3 | RNVC: 2
8D00082-20: RNCC: 5 | RNVC: 9
S-247-3/8: RNCC: 5 | RNVC: 9
8D00082: RNCC: D | RNVC: 9

21 Jul 1994

3040-01-393-5258
Rigid Connecting Link

013935258
8D00119-2: RNCC: 3 | RNVC: 2
8D00119-2: RNCC: 5 | RNVC: 9
8D00119: RNCC: D | RNVC: 9

21 Jul 1994

3040-01-393-5251
Rigid Connecting Link

013935251
8D00119-1: RNCC: 3 | RNVC: 2
8D00119-1: RNCC: 5 | RNVC: 9
8D00119: RNCC: D | RNVC: 9

21 Jul 1994

3040-01-393-5243
Rigid Connecting Link

013935243
8D00080-2: RNCC: 3 | RNVC: 2
8D00080-2: RNCC: 5 | RNVC: 9
8D00080: RNCC: D | RNVC: 9

21 Jul 1994

3040-01-378-8302
Grease Cap

013788302
186-6290: RNCC: 3 | RNVC: 2

21 Aug 1993

3040-01-373-7924
Spur Gearshaft

013737924
8350979: RNCC: 3 | RNVC: 2

10 Apr 1993

3040-01-370-8205
Rigid Connecting Link

013708205
1534AS214: RNCC: 3 | RNVC: 2
1534AS214: RNCC: 5 | RNVC: 2
1534AS214: RNCC: 5 | RNVC: 2
1534AS214: RNCC: 5 | RNVC: 2
1534AS214: RNCC: 5 | RNVC: 2
1534AS214: RNCC: 5 | RNVC: 9
10143557: RNCC: 6 | RNVC: 9

30 Jan 1993

3040-01-370-2885
Linear Actuating Cylinder Piston

013702885
6701000951: RNCC: 3 | RNVC: 2
6701000951: RNCC: 5 | RNVC: 2
6701000951: RNCC: 5 | RNVC: 2
6701000951: RNCC: 5 | RNVC: 2
6701000951: RNCC: 5 | RNVC: 9

17 Jan 1993

3040-01-370-1393
Linear Actuating Cylinder Piston

013701393
6-701-000375: RNCC: 3 | RNVC: 2
6-701-000375: RNCC: 5 | RNVC: 2
6-701-000375: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-369-5233
Straight Shaft

013695233
5N5129: RNCC: 3 | RNVC: 2

24 Dec 1992

3040-01-368-6336
Piston Rod Guide

013686336
1101: RNCC: 3 | RNVC: 2

5 Dec 1992

3040-01-366-3965
Control Cam

013663965
8445-39: RNCC: 3 | RNVC: 2

24 Oct 1992

3040-01-366-3825
Shouldered Shaft

013663825
1875150: RNCC: 3 | RNVC: 2
1875150: RNCC: 5 | RNVC: 9

24 Oct 1992

3040-01-365-7150
Remote Control Lever

013657150
0174741: RNCC: 3 | RNVC: 2
174741: RNCC: 5 | RNVC: 2
0174741: RNCC: 5 | RNVC: 9
174741: RNCC: 5 | RNVC: 9
0174741: RNCC: 5 | RNVC: 9
174741: RNCC: 5 | RNVC: 9
0174741: RNCC: 5 | RNVC: 9
174741: RNCC: 5 | RNVC: 9

11 Oct 1992

3040-01-364-4608
Shaft Retaining Plate

013644608
RE16149: RNCC: 3 | RNVC: 2
RE16149: RNCC: 5 | RNVC: 9

19 Sep 1992

3040-01-363-2544
Shaft Retaining Plate

013632544
246615: RNCC: 3 | RNVC: 2

27 Aug 1992

3040-01-361-3941
Straight Shaft

013613941
A3020650-002: RNCC: 3 | RNVC: 2

16 Jul 1992

3040-01-360-6347
Mechanical Drive Housing

013606347
29536999: RNCC: 3 | RNVC: 2
29506340: RNCC: 5 | RNVC: 2
29506340: RNCC: 5 | RNVC: 2
29506340: RNCC: 5 | RNVC: 9
29506340: RNCC: 5 | RNVC: 9
29506340: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-360-6345
Mechanical Drive Housing

013606345
29501449: RNCC: 3 | RNVC: 2
29501449: RNCC: 5 | RNVC: 2
29501449: RNCC: 5 | RNVC: 2
29501449: RNCC: 5 | RNVC: 9
29501449: RNCC: C | RNVC: 1
029121T: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-360-4992
Push-Pull Control Assembly

013604992
D30103862: RNCC: 3 | RNVC: 2
485814C91: RNCC: 3 | RNVC: 2
D301038-002-062.0: RNCC: 3 | RNVC: 2
D301038-002-062.0: RNCC: 5 | RNVC: 9
D30103862: RNCC: 5 | RNVC: 9

25 Jun 1992

3040-01-360-2381
Piston Ring

013602381
932090: RNCC: 3 | RNVC: 2
246563: RNCC: 3 | RNVC: 9
246563: RNCC: 5 | RNVC: 9

20 Jun 1992

3040-01-359-8367
Linear Actuating Cylinder Assembly

013598367
1873470: RNCC: 3 | RNVC: 2
1873470: RNCC: 5 | RNVC: 9

13 Jun 1992

3040-01-359-1072
Shouldered Shaft

013591072
4201406: RNCC: 3 | RNVC: 2

29 May 1992

3040-01-359-1073
Shouldered Shaft

013591073
247260: RNCC: 3 | RNVC: 2

29 May 1992

3040-01-359-1069
Straight Shaft

013591069
246384: RNCC: 3 | RNVC: 2

29 May 1992

3040-01-359-1015
Piston Ring

013591015
246544: RNCC: 3 | RNVC: 2

29 May 1992

3040-01-357-6569
Breather

013576569
9514B1D0000: RNCC: 3 | RNVC: 2

29 Apr 1992

3040-01-354-5565
Remote Control Lever

013545565
AT117059: RNCC: 3 | RNVC: 2
419960: RNCC: 5 | RNVC: 2

29 Feb 1992

3040-01-354-0477
Manual Control Lever

013540477
AT103454: RNCC: 3 | RNVC: 2

21 Feb 1992

3040-01-354-0411
Linear Actuating Cylinder Assembly Parts Kit

013540411
AH137208: RNCC: 3 | RNVC: 2
AH137208: RNCC: 5 | RNVC: 9

21 Feb 1992

3040-01-351-8224
Linear Actuating Cylinder Piston

013518224
H1086: RNCC: 3 | RNVC: 2
AH138200: RNCC: 5 | RNVC: 2
H1086: RNCC: D | RNVC: 9

15 Jan 1992

3040-01-347-7498
Rigid Connecting Link

013477498
12929340: RNCC: 3 | RNVC: 2
12929340: RNCC: 5 | RNVC: 2
12929340: RNCC: 5 | RNVC: 9

28 Oct 1991

3040-01-346-8328
Differential Spider

013468328
241863: RNCC: 3 | RNVC: 2

10 Oct 1991

3040-01-346-4173
Shaft Collar

013464173
9N5820: RNCC: 3 | RNVC: 2

4 Oct 1991

3040-01-343-8678
Rigid Connecting Link

013438678
70400-02291-104: RNCC: 3 | RNVC: 2
3040PL1938568: RNCC: 6 | RNVC: 9

17 Aug 1991

3040-01-342-1774
Control Cam

013421774
1395AS1055: RNCC: 3 | RNVC: 2
1395AS1055: RNCC: 5 | RNVC: 2
1395AS163: RNCC: C | RNVC: 1

16 Jul 1991

3040-01-341-4630
Remote Control Lever

013414630
15024: RNCC: 3 | RNVC: 2
17619: RNCC: C | RNVC: 1

1 Jul 1991

3040-01-340-9598
Pivot Shaft Assembly

013409598
12343913: RNCC: 3 | RNVC: 2
12343913: RNCC: 5 | RNVC: 2

23 Jun 1991

3040-01-340-2557
Flexible Control Casing

013402557
335619: RNCC: 3 | RNVC: 2
335619: RNCC: 5 | RNVC: 9

11 Jun 1991

3040-01-339-8750
Linear Actuating Cylinder Assembly

013398750
3686-004: RNCC: 3 | RNVC: 9
3686-004: RNCC: 5 | RNVC: 9

4 Jun 1991

3040-01-339-5481
Manual Control Lever

013395481
335282: RNCC: 3 | RNVC: 2
335282: RNCC: 5 | RNVC: 9
335282: RNCC: 5 | RNVC: 9

23 May 1991

3040-01-338-0527
Counterbalance Weight

013380527
3241N001: RNCC: 3 | RNVC: 2
1306194: RNCC: 5 | RNVC: 2
1306194: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-01-337-4299
Helical Gearshaft

013374299
R81514: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-337-4155
Mechanical Drive Housing

013374155
23017257: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-336-5210
Straight Shaft

013365210
3046683: RNCC: 3 | RNVC: 2

27 Mar 1991

3040-01-336-3463
Remote Control Lever

013363463
105-0954-01: RNCC: 3 | RNVC: 2

24 Mar 1991

3040-01-336-2628
Linear Actuating Cylinder Piston

013362628
787979: RNCC: 3 | RNVC: 9
MB786263: RNCC: 5 | RNVC: 9
P91925: RNCC: 5 | RNVC: 9

21 Mar 1991

3040-01-335-9690
Shouldered Shaft

013359690
T122963: RNCC: 3 | RNVC: 2
T122963: RNCC: 5 | RNVC: 9

17 Mar 1991

3040-01-335-4612
Linear Actuating Cylinder Assembly

013354612
06-10-180/312-350N: RNCC: 3 | RNVC: 9

10 Mar 1991

3040-01-335-4422
Shouldered Shaft

013354422
5N4384: RNCC: 3 | RNVC: 2

8 Mar 1991

3040-01-334-3829
Shouldered Shaft

013343829
32-79501-1019-2: RNCC: 3 | RNVC: 2
32-79501-1019-2: RNCC: 5 | RNVC: 1
3040013343829: RNCC: 6 | RNVC: 9

21 Feb 1991

3040-01-333-8241
Shouldered Shaft Assembly

013338241
8W3589: RNCC: 3 | RNVC: 2

9 Feb 1991

3040-01-333-5937
Differential Spider

013335937
2107320: RNCC: 3 | RNVC: 2
P91447: RNCC: 5 | RNVC: 2
P91447: RNCC: 5 | RNVC: 9
2107320: RNCC: 5 | RNVC: 9

6 Feb 1991

3040-01-333-1504
Shaft Collar

013331504
12285307-2: RNCC: 3 | RNVC: 2
12285307: RNCC: D | RNVC: 9

25 Jan 1991

3040-01-333-0734
Straight Shaft

013330734
82-3831: RNCC: 3 | RNVC: 2

23 Jan 1991

3040-01-332-4827
Control Pedal

013324827
3800-057: RNCC: 3 | RNVC: 2

11 Jan 1991

3040-01-332-4817
Rigid Connecting Link

013324817
908-237-081: RNCC: 3 | RNVC: 2

11 Jan 1991

3040-01-332-2450
Mechanical Drive Housing

013322450
709A1752: RNCC: 3 | RNVC: 2

8 Jan 1991

3040-01-331-9510
Bell Crank

013319510
396163: RNCC: 3 | RNVC: 2
396163: RNCC: 5 | RNVC: 9

31 Dec 1990

3040-01-331-2695
Linear Actuating Cylinder Assembly Parts Kit

013312695
549-26175: RNCC: 3 | RNVC: 2

15 Dec 1990

3040-01-331-1713
Linear Actuating Cylinder Assembly Parts Kit

013311713
9-752-100634: RNCC: 3 | RNVC: 9
9-752-100634: RNCC: 5 | RNVC: 2

14 Dec 1990

3040-01-330-9468
Counterbalance Weight

013309468
7123-914E: RNCC: 3 | RNVC: 2

12 Dec 1990

3040-01-329-6480
Shouldered Shaft

013296480
70361-03014-101: RNCC: 3 | RNVC: 2
70361-03014-101: RNCC: 5 | RNVC: 2
70361-03014-101: RNCC: 5 | RNVC: 2
70361-03014-101: RNCC: 5 | RNVC: 2

20 Nov 1990

3040-01-327-7733
Linear Actuating Cylinder Assembly

013277733
50607304: RNCC: 3 | RNVC: 2
21170-5000: RNCC: 5 | RNVC: 2
850-607304: RNCC: 5 | RNVC: 2
607304: RNCC: 5 | RNVC: 9

21 Oct 1990

3040-01-327-5445
Rotating Shaft Eye Bracket

013275445
12313337-4: RNCC: 3 | RNVC: 2
12313337-4: RNCC: 8 | RNVC: 1

17 Oct 1990

3040-01-326-7772
Rigid Connecting Link

013267772
12379435: RNCC: 3 | RNVC: 2

30 Sep 1990

3040-01-326-4535
Straight Shaft

013264535
212768-1: RNCC: 3 | RNVC: 2
267354: RNCC: 5 | RNVC: 2

25 Sep 1990

3040-01-325-9075
Control Cam

013259075
691708: RNCC: 3 | RNVC: 2
212904: RNCC: 5 | RNVC: 9

13 Sep 1990

3040-01-325-2284
Linear Actuating Cylinder Assembly

013252284
AH142930: RNCC: 3 | RNVC: 2
RE33259: RNCC: 5 | RNVC: 9
AH136546: RNCC: 5 | RNVC: 9

31 Aug 1990

3040-01-324-2688
Remote Control Lever

013242688
365148: RNCC: 3 | RNVC: 2
212866-1: RNCC: 3 | RNVC: 2
365148: RNCC: 3 | RNVC: 2
212866-1: RNCC: 5 | RNVC: 2
365148: RNCC: 5 | RNVC: 2

14 Aug 1990

3040-01-324-1251
Linear Actuating Cylinder Assembly

013241251
AHC12202: RNCC: 3 | RNVC: 2
AH150098: RNCC: 5 | RNVC: 9
RE24865: RNCC: 5 | RNVC: 9

10 Aug 1990

3040-01-322-4602
Spur Gearshaft

013224602
25652: RNCC: 3 | RNVC: 9
230046: RNCC: 5 | RNVC: 2

6 Jul 1990

3040-01-322-4588
Shouldered Shaft

013224588
4W4998: RNCC: 3 | RNVC: 2

6 Jul 1990

3040-01-321-6363
Control Cam

013216363
5100700: RNCC: 3 | RNVC: 2

20 Jun 1990

3040-01-320-8359
Nonaircraft Mechanical Actuator

013208359
22386: RNCC: 3 | RNVC: 2
HP-28-S-FT-180/190-S1-O-H: RNCC: 5 | RNVC: 2
6227763: RNCC: 5 | RNVC: 2
HP28KS-FT-180DEG-O-H: RNCC: 5 | RNVC: 9
HP28KS-FT-190-0-H: RNCC: 5 | RNVC: 9
HP28KS-FT-180-0-H: RNCC: 5 | RNVC: 9
6227763: RNCC: 7 | RNVC: 1

4 Jun 1990

3040-01-320-2694
Linear Actuating Cylinder Assembly Parts Kit

013202694
12009353: RNCC: 1 | RNVC: 2
A75431: RNCC: 3 | RNVC: 2

23 May 1990

3040-01-320-1893
Straight Shaft

013201893
70219-42418-108: RNCC: 3 | RNVC: 2

22 May 1990

3040-01-319-9393
Helical Gearshaft

013199393
3117V003: RNCC: 3 | RNVC: 2

17 May 1990

3040-01-319-8999
Body Hub

013198999
12909176: RNCC: 3 | RNVC: 2
12009187: RNCC: E | RNVC: 8

16 May 1990

3040-01-317-8519
Linear Actuating Cylinder

013178519
61-0850-00: RNCC: 3 | RNVC: 2
61-0304-00: RNCC: 5 | RNVC: 9

6 Apr 1990

3040-01-317-8520
Linear Actuating Cylinder

013178520
61-0690-00: RNCC: 3 | RNVC: 2

6 Apr 1990

3040-01-317-8290
Remote Control Lever

013178290
119153: RNCC: 3 | RNVC: 9
118198: RNCC: 5 | RNVC: 9
120076: RNCC: D | RNVC: 9

6 Apr 1990

3040-01-316-1123
Nonvehicular Propeller Shaft

013161123
3-3-1601X: RNCC: 3 | RNVC: 2
X915819: RNCC: D | RNVC: 9

3 Mar 1990

3040-01-315-9424
Shouldered Shaft

013159424
10862129: RNCC: 3 | RNVC: 2

28 Feb 1990

3040-01-315-6720
Manual Control Lever

013156720
102461-K: RNCC: 3 | RNVC: 2
30103-BC: RNCC: D | RNVC: 9

22 Feb 1990

3040-01-315-6230
Shaft Collar

013156230
PC2049: RNCC: 3 | RNVC: 9

21 Feb 1990

3040-01-315-5071
Rigid Connecting Link

013155071
484300C1: RNCC: 3 | RNVC: 2

17 Feb 1990

3040-01-315-3700
Straight Shaft

013153700
4-22516-02: RNCC: 3 | RNVC: 2

15 Feb 1990

3040-01-315-1004
Breather

013151004
BF-6: RNCC: 3 | RNVC: 2

9 Feb 1990

3040-01-314-5917
Remote Control Lever

013145917
324965: RNCC: 3 | RNVC: 2
324965: RNCC: 3 | RNVC: 9

1 Feb 1990

3040-01-313-8749
Shouldered Shaft

013138749
234825: RNCC: 3 | RNVC: 2
234825: RNCC: 5 | RNVC: 9

19 Jan 1990

3040-01-313-8750
Shouldered Shaft

013138750
234824: RNCC: 3 | RNVC: 2
234824: RNCC: 5 | RNVC: 9

19 Jan 1990

3040-01-313-6647
Pawl

013136647
S600018: RNCC: 3 | RNVC: 2
600018: RNCC: 3 | RNVC: 9

12 Jan 1990

3040-01-313-4191
Shouldered Shaft

013134191
70351-38115-101: RNCC: 3 | RNVC: 2

9 Jan 1990

3040-01-313-2880
Linear Actuating Cylinder Piston

013132880
240003: RNCC: 3 | RNVC: 2

4 Jan 1990

3040-01-312-2573
Mechanical Drive Housing

013122573
70351-38148-101: RNCC: 3 | RNVC: 2

13 Dec 1989

3040-01-311-6861
Linear Actuating Cylinder Assembly

013116861
537741: RNCC: 3 | RNVC: 2
021898-01: RNCC: 5 | RNVC: 9

2 Dec 1989

3040-01-311-4013
Connecting Link Parts Kit

013114013
13228E6287: RNCC: 3 | RNVC: 2

25 Nov 1989

3040-01-310-4853
Shaft Retaining Plate

013104853
242851: RNCC: 3 | RNVC: 2
242851: RNCC: 5 | RNVC: 9

4 Nov 1989

3040-01-307-6157
Clutch Thrust Plate

013076157
21009: RNCC: 3 | RNVC: 9

14 Sep 1989

3040-01-306-5078
Mechanical Drive Housing

013065078
TH17: RNCC: 3 | RNVC: 2

25 Aug 1989

3040-01-306-0021
Extractable Pivot

013060021
95445: RNCC: 3 | RNVC: 2

15 Aug 1989

3040-01-305-8064
Rigid Connecting Link

013058064
11392-001: RNCC: 3 | RNVC: 2
11392-001: RNCC: 3 | RNVC: 9

11 Aug 1989

3040-01-305-3321
Manual Control Lever

013053321
472 219C1: RNCC: 3 | RNVC: 2

3 Aug 1989

3040-01-304-8060
Linear Actuating Cylinder Assembly

013048060
92182-991: RNCC: 3 | RNVC: 2
3538814-802: RNCC: 5 | RNVC: 2
92182-991: RNCC: 5 | RNVC: 9
3536264-802: RNCC: 5 | RNVC: 9
3538814-802: RNCC: 5 | RNVC: 9
472-9815: RNCC: 6 | RNVC: 9

27 Jul 1989

3040-01-304-5607
Push-Pull Control Assembly

013045607
28229837: RNCC: 3 | RNVC: 2

20 Jul 1989

3040-01-302-4950
Shouldered Shaft

013024950
424-L: RNCC: 3 | RNVC: 2

15 Jun 1989

3040-01-302-4492
Gearshaft Assembly

013024492
1-080-280-03: RNCC: 3 | RNVC: 2
1-080-280-03: RNCC: 7 | RNVC: 2
1-080-280-03: RNCC: C | RNVC: 1

15 Jun 1989

3040-01-302-3010
Breather

013023010
ABB-113766-000: RNCC: 3 | RNVC: 2
001-013059-999: RNCC: 5 | RNVC: 9

13 Jun 1989

3040-01-302-2589
Remote Control Lever

013022589
126 270 04 57: RNCC: 3 | RNVC: 2
4538742-706: RNCC: 3 | RNVC: 2
4538742-706: RNCC: 5 | RNVC: 2
126 270 04 57: RNCC: 5 | RNVC: 9
94302-991: RNCC: 5 | RNVC: 9
4538742-706: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-302-2542
Straight Shaft

013022542
3227-3045-0: RNCC: 3 | RNVC: 2
01032110: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-300-3919
Shouldered Shaft

013003919
1 466 100 402: RNCC: 3 | RNVC: 2
1 466 100 325: RNCC: 5 | RNVC: 9
1 466 100 325: RNCC: 5 | RNVC: 9

14 May 1989

3040-01-299-8100
Rigid Connecting Link

012998100
204-310-101-101: RNCC: 3 | RNVC: 2
204-310-101-101: RNCC: 5 | RNVC: 2
204-310-101-101: RNCC: 5 | RNVC: 2
204-310-101-101: RNCC: 5 | RNVC: 9
AA-204-310-101-101: RNCC: 5 | RNVC: 9
204-310-101-101: RNCC: 5 | RNVC: 9

7 May 1989

3040-01-297-3413
Straight Shaft

012973413
CL127.149: RNCC: 3 | RNVC: 9

1 Apr 1989

3040-01-297-2893
Counterbalance Weight

012972893
5060T65P01: RNCC: 3 | RNVC: 2

1 Apr 1989

3040-01-295-7139
Linear Actuating Cylinder

012957139
9J8165: RNCC: 3 | RNVC: 2
5R4547: RNCC: 5 | RNVC: 9

10 Mar 1989

3040-01-295-7086
Shaft Collar

012957086
6319-1: RNCC: 3 | RNVC: 2
6319: RNCC: D | RNVC: 9

10 Mar 1989

3040-01-294-3393
Straight Shaft

012943393
7W4381: RNCC: 3 | RNVC: 2

15 Feb 1989

3040-01-294-3394
Straight Shaft

012943394
4N0345: RNCC: 3 | RNVC: 2
7C6697: RNCC: C | RNVC: 1

15 Feb 1989

3040-01-293-8581
Linear Actuating Cylinder Assembly

012938581
13219E4144-2: RNCC: 1 | RNVC: 2
13219E4144-2: RNCC: 3 | RNVC: 9
1000873: RNCC: 5 | RNVC: 9

8 Feb 1989

3040-01-293-7126
Linear Actuating Cylinder Assembly

012937126
A3-3280-X-8500: RNCC: 3 | RNVC: 2

4 Feb 1989

3040-01-292-1617
Bevel Gearshaft

012921617
70358-06620-102: RNCC: 3 | RNVC: 2
70358-06620-102: RNCC: 5 | RNVC: 9
70358-06620-102: RNCC: 5 | RNVC: 9
70358-06620-101: RNCC: C | RNVC: 1
70358-06620-101: RNCC: C | RNVC: 1
70358-06620-101: RNCC: C | RNVC: 1
70358-06620-101: RNCC: C | RNVC: 1

12 Jan 1989

3040-01-291-9597
Gearbox Parts Kit

012919597
15594112: RNCC: 3 | RNVC: 2
15594112: RNCC: 5 | RNVC: 9

9 Jan 1989

3040-01-291-8689
Linear Actuating Cylinder Assembly

012918689
150-003: RNCC: 3 | RNVC: 9

6 Jan 1989

3040-01-291-8214
Shouldered Shaft

012918214
A187739: RNCC: 3 | RNVC: 2
10497854: RNCC: 3 | RNVC: 2
10497854: RNCC: 5 | RNVC: 9

6 Jan 1989

3040-01-291-5883
Linear Actuating Cylinder Cap

012915883
1332035: RNCC: 3 | RNVC: 2
309059: RNCC: 5 | RNVC: 9
1332035: RNCC: 5 | RNVC: 9

30 Dec 1988

3040-01-289-8252
Linear Actuating Cylinder Assembly

012898252
6600324: RNCC: 3 | RNVC: 2
6600324: RNCC: 5 | RNVC: 9

1 Dec 1988

3040-01-287-2438
Rigid Connecting Link

012872438
70400-08151-061: RNCC: 3 | RNVC: 2
3040PL2008544: RNCC: 6 | RNVC: 9
70400-08151-061: RNCC: 7 | RNVC: 2

19 Oct 1988

3040-01-282-5368
Rigid Connecting Link

012825368
07543: RNCC: 3 | RNVC: 9

16 Jul 1988

3040-01-282-1741
Linear Actuating Cylinder Assembly Parts Kit

012821741
9-752-100676: RNCC: 3 | RNVC: 2

9 Jul 1988

3040-01-281-7444
Manual Control Lever

012817444
0325541: RNCC: 3 | RNVC: 2
325541: RNCC: 5 | RNVC: 2
325541: RNCC: 5 | RNVC: 9
325541: RNCC: 5 | RNVC: 9
0325541: RNCC: 5 | RNVC: 9
0325541: RNCC: 5 | RNVC: 9
325541: RNCC: 5 | RNVC: 9
0325541: RNCC: 5 | RNVC: 9

30 Jun 1988

3040-01-281-2915
Shaft Retaining Plate

012812915
12362187: RNCC: 3 | RNVC: 2

21 Jun 1988

3040-01-281-2177
Flexible Drive Shaft

012812177
91100: RNCC: 3 | RNVC: 2

19 Jun 1988

3040-01-277-5665
Straight Shaft

012775665
13228E6090: RNCC: 3 | RNVC: 2
BS.2318.00.00.059: RNCC: 5 | RNVC: 9
BS.2435.00.00.034: RNCC: 5 | RNVC: 9

22 Apr 1988

3040-01-273-7575
Rigid Connecting Link

012737575
70400-02154-050: RNCC: 3 | RNVC: 2
3040PL1952644: RNCC: 6 | RNVC: 9

1 Mar 1988

3040-01-273-4461
Remote Control Lever

012734461
3P6287: RNCC: 3 | RNVC: 2

25 Feb 1988

3040-01-269-4771
Straight Shaft

012694771
500320: RNCC: 3 | RNVC: 2
500320: RNCC: 5 | RNVC: 2
500320: RNCC: 5 | RNVC: 9

17 Dec 1987

3040-01-268-9955
Spur Gearshaft

012689955
25511: RNCC: 3 | RNVC: 9
207425: RNCC: 5 | RNVC: 2

10 Dec 1987

3040-01-268-9884
Straight Shaft

012689884
25666: RNCC: 3 | RNVC: 9
207431: RNCC: 5 | RNVC: 2

10 Dec 1987

3040-01-268-7551
Extension Shaft

012687551
384-1683-01: RNCC: 3 | RNVC: 2

5 Dec 1987

3040-01-268-5406
Body Hub

012685406
33451804: RNCC: 3 | RNVC: 2

2 Dec 1987

3040-01-268-1402
Mechanical Drive Housing

012681402
707719: RNCC: 3 | RNVC: 9
26843: RNCC: 5 | RNVC: 2

23 Nov 1987

3040-01-267-6873
Shaft Retaining Plate

012676873
A6506B: RNCC: 3 | RNVC: 2

17 Nov 1987

3040-01-267-2085
Linear Actuating Cylinder Piston Rod

012672085
7J3338: RNCC: 3 | RNVC: 2

6 Nov 1987

3040-01-267-2077
Spur Gearshaft

012672077
1144682: RNCC: 3 | RNVC: 2
8P4547: RNCC: 5 | RNVC: 9

6 Nov 1987

3040-01-267-2078
Multiple Gears Gearshaft

012672078
1144680: RNCC: 3 | RNVC: 2
8P4548: RNCC: 5 | RNVC: 9

6 Nov 1987

3040-01-266-4527
Bell Crank

012664527
70400-02212-048: RNCC: 3 | RNVC: 2
70400-02212-048: RNCC: 5 | RNVC: 9

25 Oct 1987

3040-01-264-9538
Linear Actuating Cylinder Assembly

012649538
396-9840: RNCC: 3 | RNVC: 2
8S7650: RNCC: 5 | RNVC: 9

8 Oct 1987

3040-01-264-4755
Manual Control Lever

012644755
13156-1178: RNCC: 3 | RNVC: 9
13156-1178: RNCC: 5 | RNVC: 2
13156-1178: RNCC: 5 | RNVC: 9

2 Oct 1987

3040-01-263-3256
Worm Shaft

012633256
010-10003-1: RNCC: 3 | RNVC: 2
010-10003-1: RNCC: 3 | RNVC: 9

12 Sep 1987

3040-01-263-3195
Linear Actuating Cylinder Piston Rod

012633195
375634: RNCC: 3 | RNVC: 2
375634: RNCC: 5 | RNVC: 9
375634: RNCC: C | RNVC: 1
370406: RNCC: D | RNVC: 9

12 Sep 1987

3040-01-263-0070
Mechanical Drive Housing

012630070
3908083: RNCC: 3 | RNVC: 2

9 Sep 1987

3040-01-262-2677
Linear Actuating Cylinder Piston Rod

012622677
324297: RNCC: 3 | RNVC: 9
9125310241: RNCC: 5 | RNVC: 2
9125310241: RNCC: 5 | RNVC: 9

26 Aug 1987

3040-01-262-2477
Linear Actuating Cylinder Piston Rod

012622477
DH2-272: RNCC: 3 | RNVC: 2
DH2-272: RNCC: 3 | RNVC: 9
7091005 PIECE 7: RNCC: 5 | RNVC: 2
7091005 PIECE 7: RNCC: 5 | RNVC: 9
7091005: RNCC: D | RNVC: 9

26 Aug 1987

3040-01-262-2476
Linear Actuating Cylinder Piston

012622476
DH4-165: RNCC: 3 | RNVC: 2
7091005 PIECE 5: RNCC: 5 | RNVC: 2
DH4-165: RNCC: 5 | RNVC: 9
7091005: RNCC: D | RNVC: 9

26 Aug 1987

3040-01-262-1198
Manual Control Lever

012621198
306111: RNCC: 3 | RNVC: 2
306111: RNCC: 5 | RNVC: 9

22 Aug 1987

3040-01-261-9806
Linear Actuating Cylinder Assembly

012619806
61530-064047: RNCC: 3 | RNVC: 2
709 1004: RNCC: 5 | RNVC: 2

20 Aug 1987

3040-01-261-9754
Shouldered Shaft

012619754
76-4161: RNCC: 3 | RNVC: 2
76-4161: RNCC: 3 | RNVC: 2

20 Aug 1987

3040-01-261-5078
Mechanical Drive Housing

012615078
72-2045: RNCC: 3 | RNVC: 2
72-2045: RNCC: 3 | RNVC: 2

14 Aug 1987

3040-01-253-5584
Remote Control Lever

012535584
5R7003: RNCC: 3 | RNVC: 2
5R8545: RNCC: 5 | RNVC: 9

21 Apr 1987

3040-01-253-5580
Remote Control Lever

012535580
4W5735: RNCC: 3 | RNVC: 2

21 Apr 1987

3040-01-253-5543
Shouldered Shaft

012535543
10-21-122-002: RNCC: 3 | RNVC: 9

21 Apr 1987

3040-01-253-3853
Rotating Shaft Eye Bracket

012533853
E99-116: RNCC: 3 | RNVC: 9

17 Apr 1987

3040-01-251-9385
Straight Shaft

012519385
11023723: RNCC: 3 | RNVC: 2
11023723: RNCC: 5 | RNVC: 2

26 Mar 1987

3040-01-251-6236
Spur Gearshaft

012516236
06T33963: RNCC: 3 | RNVC: 2
06T33963: RNCC: 5 | RNVC: 2

21 Mar 1987

3040-01-251-3190
Push-Pull Control Assembly

012513190
20MC0113: RNCC: 3 | RNVC: 2
4D1100-SN-095A-109: RNCC: 5 | RNVC: 2
619-8.5: RNCC: 5 | RNVC: 2
619-8.5: RNCC: 5 | RNVC: 9
4D1100-SN-095A-109: RNCC: 5 | RNVC: 9
11023722: RNCC: 7 | RNVC: 2

17 Mar 1987

3040-01-250-6046
Control Cam

012506046
9377637: RNCC: 3 | RNVC: 2

4 Mar 1987

3040-01-247-7969
Control Cam

012477969
9390031: RNCC: 3 | RNVC: 2

13 Jan 1987

3040-01-247-3225
Shaft Collar

012473225
513062: RNCC: 3 | RNVC: 2

31 Dec 1986

3040-01-247-2570
Manual Control Lever

012472570
61516: RNCC: 3 | RNVC: 2

31 Dec 1986

3040-01-245-1887
Rigid Connecting Link

012451887
13220E5616: RNCC: 3 | RNVC: 2
13220E5616: RNCC: 5 | RNVC: 2
13220E5616: RNCC: 5 | RNVC: 9
13220E5616: RNCC: 5 | RNVC: 9

24 Nov 1986

3040-01-245-0238
Shaft Retaining Plate

012450238
70308-03612-108: RNCC: 3 | RNVC: 2

23 Nov 1986

3040-01-244-3646
Helical Gearshaft

012443646
52068157: RNCC: 3 | RNVC: 2
2538934: RNCC: 5 | RNVC: 9
2538935: RNCC: 5 | RNVC: 9
3212735: RNCC: 5 | RNVC: 9
3212719: RNCC: D | RNVC: 9

11 Nov 1986

3040-01-244-2594
Manual Control Lever

012442594
E0TZ1021819-B: RNCC: 3 | RNVC: 9
E0TZ1021819-B: RNCC: 5 | RNVC: 9

8 Nov 1986

3040-01-243-4934
Remote Control Lever

012434934
22038927: RNCC: 3 | RNVC: 2
22038927: RNCC: 5 | RNVC: 9
22009310: RNCC: C | RNVC: 1
22020812CHT: RNCC: D | RNVC: 9

28 Oct 1986

3040-01-243-1472
Linear Actuating Cylinder Assembly

012431472
SSR-12-1: RNCC: 3 | RNVC: 2

23 Oct 1986

3040-01-241-4814
Rigid Connecting Link

012414814
D89620: RNCC: 3 | RNVC: 2
D89620: RNCC: 5 | RNVC: 9

26 Sep 1986

3040-01-241-4693
Straight Shaft

012414693
3038904: RNCC: 3 | RNVC: 2

26 Sep 1986

3040-01-241-4696
Shouldered Shaft

012414696
3046680: RNCC: 3 | RNVC: 2
3006350: RNCC: 5 | RNVC: 9

26 Sep 1986

3040-01-241-4267
Mechanical Drive Housing

012414267
300555700: RNCC: 3 | RNVC: 2
3005557: RNCC: 5 | RNVC: 9

25 Sep 1986

3040-01-240-8628
Rigid Connecting Link

012408628
L73300: RNCC: 3 | RNVC: 2

19 Sep 1986

3040-01-240-8552
Mechanical Drive Housing

012408552
416 331 04 05: RNCC: 3 | RNVC: 2
416 331 0605: RNCC: 5 | RNVC: 2
416 331 0605: RNCC: 5 | RNVC: 9

19 Sep 1986

3040-01-239-8348
Lever

012398348
9N1916: RNCC: 3 | RNVC: 2

5 Sep 1986

3040-01-239-8349
Lever

012398349
9N2165: RNCC: 3 | RNVC: 2

5 Sep 1986

3040-01-232-8255
Speedometer-Tachometer Drive Adapter

012328255
476259C1: RNCC: 3 | RNVC: 9
476259C1: RNCC: 5 | RNVC: 2
ES775N: RNCC: 5 | RNVC: 9

21 May 1986

3040-01-231-9841
Linear Actuating Cylinder Assembly

012319841
1-1/8CLAD6: RNCC: 3 | RNVC: 2

7 May 1986

3040-01-231-9218
Shaft

012319218
75285-4: RNCC: 3 | RNVC: 2

6 May 1986

3040-01-226-2205
Brake Drum Adapter

012262205
11501: RNCC: 3 | RNVC: 2
2CD526: RNCC: 5 | RNVC: 2
2CD526: RNCC: 5 | RNVC: 9
11501: RNCC: 5 | RNVC: 9

13 Feb 1986

3040-01-222-9427
Rigid Connecting Link

012229427
4F23660-119C: RNCC: 3 | RNVC: 2

20 Dec 1985

3040-01-219-5697
Mechanical Drive Housing

012195697
3038668: RNCC: 3 | RNVC: 2

29 Oct 1985

3040-01-217-1347
Rotating Shaft Eye Bracket

012171347
C0105065300: RNCC: 3 | RNVC: 9
C0105053400: RNCC: 5 | RNVC: 9
105-0534: RNCC: 5 | RNVC: 9

22 Sep 1985

3040-01-214-3146
Shouldered Shaft

012143146
1373380: RNCC: 3 | RNVC: 2
1373380: RNCC: 5 | RNVC: 9

8 Aug 1985

3040-01-213-7758
Remote Control Lever

012137758
1418960W: RNCC: 3 | RNVC: 2
1418960W: RNCC: 5 | RNVC: 9

30 Jul 1985

3040-01-209-9968
Shouldered Shaft

012099968
707728: RNCC: 3 | RNVC: 2
707728WE: RNCC: 5 | RNVC: 9

6 Jun 1985

3040-01-209-8678
Control Cam

012098678
9376397-2: RNCC: 3 | RNVC: 2
9376397: RNCC: D | RNVC: 9

4 Jun 1985

3040-01-208-7049
Shouldered Shaft

012087049
7N5239: RNCC: 3 | RNVC: 2

17 May 1985

3040-01-208-5777
Straight Shaft

012085777
12009296: RNCC: 3 | RNVC: 2

15 May 1985

3040-01-208-4601
Rigid Connecting Link

012084601
235791-0001: RNCC: 3 | RNVC: 2
191803-0025: RNCC: 5 | RNVC: 9

14 May 1985

3040-01-207-6569
Mechanical Drive Housing

012076569
26988: RNCC: 3 | RNVC: 2
26988: RNCC: 3 | RNVC: 9

4 May 1985

3040-01-207-6412
Mechanical Drive Housing

012076412
3-173-800-900: RNCC: 3 | RNVC: 2
3040012076412: RNCC: 6 | RNVC: 9

3 May 1985

3040-01-206-8989
Pawl

012068989
12336104-2: RNCC: 3 | RNVC: 2

24 Apr 1985

3040-01-199-7942
Straight Shaft

011997942
32754-32: RNCC: 3 | RNVC: 9
3314846 PIECE 26: RNCC: 5 | RNVC: 2
29983-31: RNCC: 5 | RNVC: 9
14025-1 PIECE 26: RNCC: 5 | RNVC: 9
32060-34: RNCC: C | RNVC: 1
3314846: RNCC: D | RNVC: 9
14025-1: RNCC: D | RNVC: 9

25 Jan 1985

3040-01-191-4160
Shouldered Shaft

011914160
239078: RNCC: 3 | RNVC: 2
239078: RNCC: 3 | RNVC: 9
239078: RNCC: 5 | RNVC: 9
239078: RNCC: 5 | RNVC: 9
239078: RNCC: 5 | RNVC: 9

7 Oct 1984

Load More Results