What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 150 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 150of 575

3040-01-249-1516
Rigid Connecting Link

012491516
12349750: RNCC: 3 | RNVC: 2
12349750: RNCC: 5 | RNVC: 9

6 Feb 1987

3040-01-250-1327
Linear Actuating Cylinder Assembly

012501327
9377597: RNCC: 3 | RNVC: 2
TF17DAXX3AAAB312: RNCC: 5 | RNVC: 2
7600719-A: RNCC: 6 | RNVC: 9

26 Feb 1987

3040-01-242-9883
Rigid Connecting Link

012429883
412-076-620-101: RNCC: 3 | RNVC: 2

20 Oct 1986

3040-01-221-2138
Linear Actuating Cylinder Cap

012212138
104779652: RNCC: 3 | RNVC: 2
104779652: RNCC: 5 | RNVC: 2
104779652: RNCC: 5 | RNVC: 9
104779652: RNCC: 5 | RNVC: 9

26 Nov 1985

3040-01-208-9288
Shouldered Shaft

012089288
7-0064-01: RNCC: 3 | RNVC: 2
DH6080D-1 PIECE 7: RNCC: 5 | RNVC: 1
NF14770: RNCC: D | RNVC: 9

21 May 1985

3040-01-200-8453
Friction Lining

012008453
660509309: RNCC: 3 | RNVC: 2
PL660509000-9-35: RNCC: 5 | RNVC: 2
PL660509000-9-35: RNCC: 5 | RNVC: 9

10 Feb 1985

3040-01-199-7336
Shouldered Shaft

011997336
9529M24P01: RNCC: 3 | RNVC: 2
9529M24P01: RNCC: 5 | RNVC: 2
9529M24P01: RNCC: 5 | RNVC: 2
9529M24P01: RNCC: 5 | RNVC: 2
9529M24P01: RNCC: 5 | RNVC: 9

25 Jan 1985

3040-01-200-9108
Bell Crank

012009108
9531M51P01: RNCC: 3 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 2
9531M51P01: RNCC: 5 | RNVC: 9
9531M51P01: RNCC: 5 | RNVC: 9
9531M51P01: RNCC: 5 | RNVC: 9
9531M51P01: RNCC: C | RNVC: 1

10 Feb 1985

3040-01-199-0774
Remote Control Lever

011990774
1282M38P02: RNCC: 3 | RNVC: 2
1282M38P02: RNCC: 5 | RNVC: 9
1282M38P02: RNCC: 5 | RNVC: 9
1282M38P01: RNCC: 5 | RNVC: 9

17 Jan 1985

3040-01-195-9303
Rigid Connecting Link

011959303
123C10221-601: RNCC: 3 | RNVC: 2
123C10221-601: RNCC: 5 | RNVC: 9
123C10221-601: RNCC: 5 | RNVC: 9
123C10221-1: RNCC: 5 | RNVC: 9

4 Dec 1984

3040-01-189-4266
Manual Control Lever

011894266
382-812-020-401-026: RNCC: 3 | RNVC: 2
382-812-020-401-026: RNCC: 5 | RNVC: 2
382-812-020-401-038: RNCC: 5 | RNVC: 9
350-812-020-401-026: RNCC: 5 | RNVC: 9
382-812-020-401-026: RNCC: 5 | RNVC: 9
3040PL1327944: RNCC: 6 | RNVC: 9
133-020-401-026: RNCC: E | RNVC: 8

15 Sep 1984

3040-01-185-0710
Shouldered Shaft

011850710
217125: RNCC: 3 | RNVC: 2

25 Jul 1984

3040-01-181-9400
Counterbalance Weight

011819400
7-262110071-3: RNCC: 3 | RNVC: 2
7-262110071-3: RNCC: 3 | RNVC: 2
7-262110071-3: RNCC: 3 | RNVC: 9

18 Jun 1984

3040-01-182-1903
Shouldered Shaft

011821903
1108009205: RNCC: 3 | RNVC: 2
1108009205: RNCC: 5 | RNVC: 2

21 Jun 1984

3040-01-183-2033
Mechanical Drive Housing

011832033
RG35245-2: RNCC: 3 | RNVC: 2

3 Jul 1984

3040-01-162-2190
Bevel Gearshaft

011622190
7-113100037-5: RNCC: 3 | RNVC: 2
7-113100037-5: RNCC: 5 | RNVC: 9
7-113100037-5: RNCC: 5 | RNVC: 9
7-113100037-5: RNCC: 5 | RNVC: 9
7-113100037: RNCC: 7 | RNVC: 2

15 Sep 1983

3040-01-164-9644
Shaft Collar

011649644
12529669: RNCC: 3 | RNVC: 2

24 Oct 1983

3040-01-158-3258
Shouldered Shaft

011583258
12321706: RNCC: 3 | RNVC: 2

20 Jul 1983

3040-01-158-9660
Rigid Connecting Link

011589660
70400-08155-053: RNCC: 3 | RNVC: 2
70400-08155-053: RNCC: 5 | RNVC: 2
70400-08155-053: RNCC: 5 | RNVC: 2
70400-08155-053: RNCC: 5 | RNVC: 2
70400-08155-053: RNCC: 5 | RNVC: 9
3040PL1952119: RNCC: 6 | RNVC: 9
70400-8155A-053: RNCC: 7 | RNVC: 2

31 Jul 1983

3040-01-158-9663
Rigid Connecting Link

011589663
70400-08155-056: RNCC: 3 | RNVC: 2
70400-08155-056: RNCC: 5 | RNVC: 2
70400-08155-056: RNCC: 5 | RNVC: 2
70400-08155-056: RNCC: 5 | RNVC: 2
3040PL1967941: RNCC: 6 | RNVC: 9
70400-08155A-056: RNCC: 7 | RNVC: 2
70400-08155-052: RNCC: E | RNVC: 8

31 Jul 1983

3040-01-159-9625
Turbine Tierod

011599625
558089: RNCC: 3 | RNVC: 2
558089: RNCC: 5 | RNVC: 2
558089: RNCC: 5 | RNVC: 9

16 Aug 1983

3040-01-155-6029
Ac Output Arm Assy

011556029
A28701-001: RNCC: 3 | RNVC: 2
A28701-1: RNCC: 5 | RNVC: 2
A28701-1: RNCC: 5 | RNVC: 9

13 Jun 1983

3040-01-143-9970
Shouldered Shaft

011439970
79046-1: RNCC: 3 | RNVC: 9
79046-1: RNCC: 5 | RNVC: 2
79046-1: RNCC: 5 | RNVC: 2
79046-1: RNCC: 5 | RNVC: 9
79046-1: RNCC: C | RNVC: 1
73562-1: RNCC: E | RNVC: 8

13 Dec 1982

3040-01-128-0421
Rigid Connecting Link

011280421
3534-1: RNCC: 3 | RNVC: 2
160C123005-5: RNCC: 7 | RNVC: 9
160C123005-5: RNCC: C | RNVC: 1

11 Mar 1982

3040-01-128-9812
Rigid Connecting Link

011289812
12307450: RNCC: 3 | RNVC: 2

30 Mar 1982

3040-01-128-6583
Bevel Gearshaft

011286583
2-030-150-04: RNCC: 3 | RNVC: 2

26 Mar 1982

3040-01-123-6097
Rigid Connecting Link

011236097
3269426: RNCC: 3 | RNVC: 2
3269426: RNCC: 5 | RNVC: 2
717124414701: RNCC: 5 | RNVC: 9
3040PL0911507: RNCC: 6 | RNVC: 9

16 Dec 1981

3040-01-114-9746
Rigid Connecting Link

011149746
70400-06719-041: RNCC: 3 | RNVC: 2
3040PL1952553: RNCC: 6 | RNVC: 9
70400-06719: RNCC: D | RNVC: 9

25 Jun 1981

3040-01-106-8085
Shouldered Shaft

011068085
12293066: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-105-5784
Mechanical Drive Housing

011055784
2-060-190-10: RNCC: 3 | RNVC: 2

29 Dec 1980

3040-01-110-4320
Shouldered Shaft

011104320
12296871: RNCC: 3 | RNVC: 2
10114554: RNCC: 6 | RNVC: 9

31 Mar 1981

3040-01-102-3579
Bevel Gearshaft

011023579
12287606: RNCC: 3 | RNVC: 2

18 Oct 1980

3040-01-102-6053
Rigid Connecting Link

011026053
70101-08003-102: RNCC: 3 | RNVC: 2
70101-08003-102: RNCC: 5 | RNVC: 2

23 Oct 1980

3040-01-083-5646
Bell Crank

010835646
12284024: RNCC: 3 | RNVC: 2
XM6032: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-01-088-1919
Bell Crank

010881919
70400-02170-044: RNCC: 3 | RNVC: 2
3040PL1941277: RNCC: 6 | RNVC: 9

8 Jan 1980

3040-01-088-1200
Worm Shaft

010881200
9240-004 SHEET 7: RNCC: 3 | RNVC: 2
9240-004-56: RNCC: 5 | RNVC: 9
9240-004-07: RNCC: 5 | RNVC: 9
9240-004 SHEET 7: RNCC: 5 | RNVC: 9
9240-004-07: RNCC: 5 | RNVC: 9
26800306: RNCC: 5 | RNVC: 9

6 Jan 1980

3040-01-074-9587
Control Cam

010749587
12267211: RNCC: 1 | RNVC: 2
23011049: RNCC: 3 | RNVC: 2
DAX11347: RNCC: 5 | RNVC: 9

11 Apr 1979

3040-01-056-1252
Linear Actuating Cylinder Piston

010561252
8449327: RNCC: 3 | RNVC: 2
8449327: RNCC: 5 | RNVC: 9
3040010561252: RNCC: 6 | RNVC: 9

17 Feb 1978

3040-01-055-0453
Shouldered Shaft

010550453
105D3902: RNCC: 3 | RNVC: 2
3040PL0664537: RNCC: 6 | RNVC: 9

30 Jan 1978

3040-01-060-7235
Shouldered Shaft

010607235
L3302: RNCC: 3 | RNVC: 2
16VF011-10: RNCC: 5 | RNVC: 2
GM7060: RNCC: 5 | RNVC: 2
GM9060: RNCC: 5 | RNVC: 9
3040PL1601273: RNCC: 6 | RNVC: 9
3040PL0665932: RNCC: 6 | RNVC: 9
16VF011: RNCC: 7 | RNVC: 2

29 May 1978

3040-01-056-1250
Linear Actuating Cylinder

010561250
8449329: RNCC: 3 | RNVC: 2
8449329: RNCC: 5 | RNVC: 9
3040010561250: RNCC: 6 | RNVC: 9

17 Feb 1978

3040-01-054-9852
Shaft Collar

010549852
196B7617: RNCC: 3 | RNVC: 2
3040PL0664534: RNCC: 6 | RNVC: 9

30 Jan 1978

3040-01-050-4558
Right Hand Pawl

010504558
4472R172: RNCC: 3 | RNVC: 2

7 Nov 1977

3040-01-053-7619
Rigid Connecting Link

010537619
3511-7: RNCC: 3 | RNVC: 2
3511-7-G: RNCC: 5 | RNVC: 2
3011-7: RNCC: E | RNVC: 8

10 Jan 1978

3040-01-041-1916
Rigid Connecting Link

010411916
4501-264: RNCC: 3 | RNVC: 2
4064-6: RNCC: 5 | RNVC: 2
68B418000-264: RNCC: 7 | RNVC: 2

21 May 1977

3040-01-011-1461
Spiral Bevel Pinion

010111461
212-040-450-5: RNCC: 3 | RNVC: 2

16 Oct 1975

3040-01-014-8231
Spur Gearshaft

010148231
212-040-500-006: RNCC: 3 | RNVC: 2
212-040-500-6: RNCC: 5 | RNVC: 2

6 Jan 1976

3040-01-023-0730
Bell Crank

010230730
65-64238-1: RNCC: 3 | RNVC: 2
65-64238-1: RNCC: 5 | RNVC: 2

10 Jun 1976

3040-01-004-6695
Rigid Connecting Link

010046695
160C122006-1: RNCC: 3 | RNVC: 2
160C122006-1: RNCC: 5 | RNVC: 9
160C122006-3: RNCC: 5 | RNVC: 9
160C122006-1: RNCC: 5 | RNVC: 9
SR11013A: RNCC: 5 | RNVC: 9

29 May 1975

3040-01-008-7990
Carrier Match Set Shaft

010087990
714610WE: RNCC: 3 | RNVC: 2
714610: RNCC: 5 | RNVC: 2

30 Aug 1975

3040-01-004-4064
Rigid Connecting Link

010044064
3519-1: RNCC: 3 | RNVC: 2
3019-1: RNCC: 5 | RNVC: 9
3019-3: RNCC: 5 | RNVC: 9

1 Jun 1975

3040-00-968-8565
Brake Shoe

009688565
W2F23700: RNCC: 3 | RNVC: 2
W2F23700: RNCC: 3 | RNVC: 9
W2F23700: RNCC: 5 | RNVC: 2
W2F23700: RNCC: 5 | RNVC: 2
W2F23700: RNCC: 5 | RNVC: 9
W2F23700: RNCC: 5 | RNVC: 9
W2F23700: RNCC: 5 | RNVC: 9
W2F23700: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-938-3523
Control Cam

009383523
416623-1: RNCC: 3 | RNVC: 2
416623-1: RNCC: 5 | RNVC: 2
416623-1: RNCC: 5 | RNVC: 2
416623-1: RNCC: 5 | RNVC: 2
416623-1: RNCC: 5 | RNVC: 9
416623-1: RNCC: 5 | RNVC: 9
416623-1: RNCC: 5 | RNVC: 9
416623-1: RNCC: 5 | RNVC: 9
416623-1: RNCC: 5 | RNVC: 9

27 Feb 1970

3040-00-927-9407
Shouldered Shaft

009279407
11605042: RNCC: 3 | RNVC: 2
11605042: RNCC: 5 | RNVC: 9

24 Aug 1966

3040-00-933-4197
Shaft Collar

009334197
11597657: RNCC: 3 | RNVC: 2
3040009334197: RNCC: 5 | RNVC: 9

15 Aug 1966

3040-00-911-1114
Mechanical Drive Housing

009111114
595310: RNCC: 3 | RNVC: 9
595310: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-00-894-6542
Rigid Connecting Link

008946542
204-010-925-9: RNCC: 3 | RNVC: 2
204-010-925-9: RNCC: 5 | RNVC: 2
204-010-925-009: RNCC: 5 | RNVC: 2
14546-6542: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-888-5184
Counterbalance Weight

008885184
436263CL8: RNCC: 3 | RNVC: 2
436263CL8: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-855-9529
Bevel Gearshaft

008559529
2-160-030-05: RNCC: 3 | RNVC: 2
2-160-030-05: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-860-7453
Bevel Gearshaft

008607453
2-080-240-01: RNCC: 3 | RNVC: 2
2-080-240-01: RNCC: 7 | RNVC: 2

1 Jan 1963

3040-00-705-7860
Remote Control Lever

007057860
10862308: RNCC: 3 | RNVC: 2
2520007057860: RNCC: 5 | RNVC: 9
10862308: RNCC: 5 | RNVC: 9
2520007057860: RNCC: 6 | RNVC: 9

2 Jun 1969

3040-00-631-5204
Shouldered Shaft

006315204
521716: RNCC: 3 | RNVC: 2
521716: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-617-7203
Idler Shaft-Gearbox

006177203
579858: RNCC: 3 | RNVC: 2
579858: RNCC: 5 | RNVC: 2
579858: RNCC: 5 | RNVC: 2
416157: RNCC: 5 | RNVC: 9

31 Mar 1972

3040-00-548-3429
Accumulator Cap

005483429
SM-C-806612: RNCC: 3 | RNVC: 2
SM-C-806612: RNCC: 5 | RNVC: 2
SM-C-806612: RNCC: 5 | RNVC: 2
SMB657398: RNCC: 5 | RNVC: 9
SM-D-657398: RNCC: 5 | RNVC: 9
SM-C-806612: RNCC: 5 | RNVC: 9
SM-C-806612: RNCC: 5 | RNVC: 9
SM-D-657398: RNCC: 5 | RNVC: 9
SM-C-806612: RNCC: 8 | RNVC: 2

12 Oct 1974

3040-00-481-4414
Motor Altpads Brake

004814414
36B505950P1: RNCC: 3 | RNVC: 9
36B505950P1: RNCC: 5 | RNVC: 2
36B505950P1: RNCC: 5 | RNVC: 2
36B505950P1: RNCC: 5 | RNVC: 9

6 Feb 1970

3040-00-448-1082
Rigid Connecting Link

004481082
212-061-117-001: RNCC: 3 | RNVC: 2
212-061-117-1: RNCC: 5 | RNVC: 9
212-061-117-1: RNCC: 5 | RNVC: 9

30 Dec 1970

3040-00-435-0846
Multiple Gears Gearshaft

004350846
C5A27152: RNCC: 3 | RNVC: 2
C5A27152: RNCC: 3 | RNVC: 9
C5A27152: RNCC: 5 | RNVC: 2
C5A27152: RNCC: 5 | RNVC: 9
C5A27152: RNCC: 5 | RNVC: 9

14 Mar 1969

3040-00-420-8174
Straight Shaft

004208174
4F55194-111A: RNCC: 3 | RNVC: 2

14 Mar 1969

3040-00-411-3133
Flexible Shaft

004113133
209-001-195-1: RNCC: 3 | RNVC: 2
209-001-195-001: RNCC: 5 | RNVC: 2
209-001-195-1: RNCC: 5 | RNVC: 9
209-001-195-1: RNCC: 5 | RNVC: 9

18 Aug 1969

3040-00-393-4102
Rigid Connecting Link

003934102
212-076-151-001: RNCC: 3 | RNVC: 2
212-076-151-1: RNCC: 5 | RNVC: 9

5 Apr 1974

3040-00-394-4565
Rigid Connecting Link

003944565
212-076-151-003: RNCC: 3 | RNVC: 2
212-076-151-3: RNCC: 5 | RNVC: 2
212-076-151-9: RNCC: 5 | RNVC: 9
212-076-142-003: RNCC: 5 | RNVC: 9
212-076-142-3: RNCC: C | RNVC: 1

8 Apr 1974

3040-00-333-6809
Rigid Connecting Link

003336809
9-65363: RNCC: 3 | RNVC: 2
9-65363: RNCC: 5 | RNVC: 2
9-65363: RNCC: 5 | RNVC: 2
9-65363: RNCC: 5 | RNVC: 2
9-65363: RNCC: 5 | RNVC: 2
9-65363: RNCC: 5 | RNVC: 2
9-65363: RNCC: 5 | RNVC: 2
9-65363: RNCC: 5 | RNVC: 2
9-65363: RNCC: 5 | RNVC: 2
9-65363: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-314-0047
Worm Wheel Gearshaft

003140047
123AMM50010-1: RNCC: 3 | RNVC: 2
123AMM50010-1: RNCC: 5 | RNVC: 9

7 Nov 1973

3040-00-315-7075
Housing Shell Assy

003157075
A19008: RNCC: 3 | RNVC: 2

2 Nov 1973

3040-00-239-0286
Spur Gearshaft

002390286
3016973: RNCC: 3 | RNVC: 2
3016973: RNCC: 5 | RNVC: 2

29 Oct 1969

3040-00-224-9022
Hydraulic Accumulator

002249022
511482-3: RNCC: 3 | RNVC: 2
A7J0578-A144K: RNCC: 3 | RNVC: 9
511482-3: RNCC: 5 | RNVC: 2
A7J0578-A144K: RNCC: 5 | RNVC: 9

18 Mar 1970

3040-00-169-7429
Rigid Connecting Link

001697429
123L10022-501: RNCC: 3 | RNVC: 2
123L10022-501: RNCC: 5 | RNVC: 9
123L10022: RNCC: D | RNVC: 9

25 Aug 1972

3040-00-167-4085
Flexible Shaft Assembly

001674085
65300-12165-102: RNCC: 1 | RNVC: 2
S16366-602: RNCC: 3 | RNVC: 2
16366-602: RNCC: 5 | RNVC: 9
16366-602: RNCC: 5 | RNVC: 9
65300-12165-102: RNCC: 8 | RNVC: 2
16366: RNCC: D | RNVC: 9

7 Feb 1973

3040-00-134-8117
Rigid Connecting Link Assy

001348117
114R3611-1: RNCC: 3 | RNVC: 2
114R3611-1: RNCC: 5 | RNVC: 2

19 Nov 1969

3040-00-118-2780
Torque Shaft Assembly

001182780
149B4019-101: RNCC: 3 | RNVC: 2

9 Oct 1968

3040-00-056-2835
Link Shaft

000562835
174559: RNCC: 3 | RNVC: 2
174559: RNCC: 5 | RNVC: 9
174559: RNCC: 5 | RNVC: 9
174559: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-019-2218
Spur Gearshaft

000192218
500847: RNCC: 3 | RNVC: 2
500847: RNCC: 3 | RNVC: 2
500847: RNCC: 5 | RNVC: 2
500847: RNCC: 5 | RNVC: 2
500847: RNCC: 5 | RNVC: 2
500847: RNCC: 5 | RNVC: 9
500847: RNCC: 5 | RNVC: 9
500847: RNCC: 5 | RNVC: 9
500847: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-01-666-6330
Linear Actuating Cylinder Assembly

016666330
70192: RNCC: 3 | RNVC: 2

14 Sep 2017

3040-12-356-3479
Remote Control Lever

123563479
027511202: RNCC: 3 | RNVC: 2

18 Feb 2002

3040-01-665-1836
Linear Actuating Cylinder Assembly

016651836
12505544-001: RNCC: 3 | RNVC: 2

21 Jul 2017

3040-12-345-9319
Rigid Connecting Link

123459319
0242 0053: RNCC: 3 | RNVC: 2

19 May 1998

3040-21-914-9942
Spur Gearshaft

219149942
22400: RNCC: 3 | RNVC: 2

23 Feb 1999

3040-14-552-2497
Linear Actuating Cylinder

145522497
1216-262-300B: RNCC: 3 | RNVC: 2

6 Dec 2006

3040-20-001-2655
Rigid Connecting Link

200012655
1224-72-1: RNCC: 3 | RNVC: 2
1201-290 REV A ITEM NO 60: RNCC: 5 | RNVC: 2
1201-291 REV A ITEM NO 57: RNCC: 5 | RNVC: 2

6 Feb 2004

3040-99-961-2849
Linear Actuating Cylinder Assembly

999612849
G406/8020: RNCC: 3 | RNVC: 2

26 Feb 2002

3040-01-669-9765
Launching Cable

016699765
VT7301G050: RNCC: 3 | RNVC: 2

30 Jan 2018

3040-01-694-1855
Control Cable Assembly

016941855
240-21100: RNCC: 3 | RNVC: 2
240-54201/SHEET 1: RNCC: D | RNVC: 9

22 Mar 2021

3040-15-110-6116
Alberocomplessivo

151106116
60160128: RNCC: 3 | RNVC: 2

18 Apr 1990

3040-01-682-0413
Transmission Fluid Cooler

016820413
12542357: RNCC: 1 | RNVC: 2
31468A: RNCC: 3 | RNVC: 2

18 Jul 2019

3040-01-684-5738
Rigid Connecting Link

016845738
12628159-5: RNCC: 3 | RNVC: 2
12628159: RNCC: D | RNVC: 9

7 Nov 2019

3040-99-479-6767
Linear Actuating Cylinder Assembly

994796767
553/60208: RNCC: 3 | RNVC: 2

16 Nov 2011

3040-21-907-6809
Bell Crank

219076809
10503648: RNCC: 3 | RNVC: 2

24 Oct 1990

3040-01-671-3951
Rigid Connecting Link

016713951
00932: RNCC: 3 | RNVC: 2

26 Mar 2018

3040-01-683-5931
Rigid Connecting Link

016835931
936165: RNCC: 3 | RNVC: 2

30 Sep 2019

3040-01-692-0792
Rigid Connecting Link

016920792
3847AS135-2: RNCC: 3 | RNVC: 2

18 Nov 2020

3040-01-661-2632
Bell Crank

016612632
751-7072689-1: RNCC: 3 | RNVC: 2
7072689-1: RNCC: 5 | RNVC: 2
751-7072689: RNCC: D | RNVC: 9

24 Feb 2017

3040-99-880-0383
Linear Actuating Cylinder

998800383
PE21829: RNCC: 3 | RNVC: 2

11 Dec 2009

3040-01-650-3101
Linear Actuating Cylinder Assembly

016503101
333/E3663: RNCC: 3 | RNVC: 2

27 Nov 2015

3040-01-616-2005
Shouldered Shaft

016162005
MTM-10119: RNCC: 3 | RNVC: 2

5 Feb 2013

3040-01-632-4192
Mechanical Drive Housing Part

016324192
69J-45300-23-8D: RNCC: 3 | RNVC: 2

17 Oct 2014

3040-01-643-2811
Linear Actuating Cylinder Assembly

016432811
1H000001122AA: RNCC: 3 | RNVC: 2
SKD170081 REV B: RNCC: D | RNVC: 9

26 Mar 2015

3040-01-650-2902
Linear Actuating Cylinder Assembly

016502902
333/E3635: RNCC: 3 | RNVC: 2

25 Nov 2015

3040-01-558-9612
Rotating Shaft Eye Bracket

015589612
14014: RNCC: 3 | RNVC: 2

30 Nov 2007

3040-01-559-5227
Mechanical Drive Housing Part

015595227
527-5942038 PIECE 10: RNCC: 3 | RNVC: 2
1313-2 PIECE 10: RNCC: 5 | RNVC: 2

20 Dec 2007

3040-01-568-4532
Hydraulic Control Assembly

015684532
5522/2-999-100: RNCC: 3 | RNVC: 2
5522-999-000: RNCC: 3 | RNVC: 9
0511PL FIND NO 1: RNCC: 5 | RNVC: 2

30 Oct 2008

3040-01-626-5036
Hub Clamp

016265036
8475526: RNCC: 3 | RNVC: 2

12 Mar 2014

3040-01-627-2858
Transmission Fluid Cooler

016272858
PAAI126695: RNCC: 3 | RNVC: 2
EKM-1024-O-CN-W-SW-BZ-G1-1/2: RNCC: 5 | RNVC: 9

8 Apr 2014

3040-01-583-8770
Piston Rod Guide

015838770
MLR83467AG1: RNCC: 3 | RNVC: 2
MLR83467AG1: RNCC: 3 | RNVC: 9
MLR83467AG1: RNCC: 5 | RNVC: 9

9 Apr 2010

3040-01-588-7258
Controllable Swashplate

015887258
905-09254-009: RNCC: 3 | RNVC: 2
180B4169: RNCC: 5 | RNVC: 2

30 Sep 2010

3040-01-619-0216
Shouldered Shaft Assembly

016190216
432136: RNCC: 3 | RNVC: 2
432100: RNCC: D | RNVC: 9

14 May 2013

3040-01-656-0655
Helical Gearshaft

016560655
257T3518-1: RNCC: 3 | RNVC: 1

15 Jun 2016

3040-01-617-2043
Linear Actuating Cylinder Assembly

016172043
CRC-2521: RNCC: 3 | RNVC: 2
CRC-2521: RNCC: 5 | RNVC: 2
F449888: RNCC: D | RNVC: 9

14 Mar 2013

3040-01-628-4837
Nonrotating Shaft Eye Bracket

016284837
06A8165013: RNCC: 3 | RNVC: 2

28 May 2014

3040-01-633-1377
Mechanical Drive Housing Part

016331377
69K-45300-25-8D: RNCC: 3 | RNVC: 2
69K-45300-22-8D: RNCC: 5 | RNVC: 9
69K-45300-23-8D: RNCC: 5 | RNVC: 9
69K-45300-24-8D: RNCC: 5 | RNVC: 9

10 Nov 2014

3040-01-650-2913
Linear Actuating Cylinder Assembly

016502913
333/E3538: RNCC: 3 | RNVC: 2
333/E3538: RNCC: 5 | RNVC: 2

25 Nov 2015

3040-01-633-8464
Rigid Connecting Link

016338464
167-8278267 ITEM 10: RNCC: 3 | RNVC: 2
167-8278270 ITEM 21: RNCC: 5 | RNVC: 2

5 Dec 2014

3040-01-643-8080
Linear Actuating Cylinder Assembly

016438080
148479: RNCC: 3 | RNVC: 2

13 Apr 2015

3040-01-631-1937
Shaft Collar

016311937
12018A5004: RNCC: 3 | RNVC: 2

4 Sep 2014

3040-01-564-0080
Rh Ball Socket

015640080
3605227: RNCC: 3 | RNVC: 2
3605227: RNCC: 5 | RNVC: 9

2 Jun 2008

3040-01-590-0713
Remote Control Lever

015900713
107150: RNCC: 3 | RNVC: 2

17 Nov 2010

3040-01-596-4502
Pawl

015964502
A10520: RNCC: 3 | RNVC: 2

17 May 2011

3040-01-598-7635
Manual Control Lever

015987635
8742809-70: RNCC: 3 | RNVC: 2

25 Aug 2011

3040-01-612-8675
Body Hub

016128675
02992232: RNCC: 3 | RNVC: 2
143110: RNCC: 5 | RNVC: 9
DEU0301287: RNCC: 5 | RNVC: 9
0229 2232: RNCC: 5 | RNVC: 9
2992232: RNCC: 5 | RNVC: 9

23 Oct 2012

3040-01-644-3991
Ball Joint Parts Kit

016443991
144011915ENP20: RNCC: 3 | RNVC: 2
144011448ENP20: RNCC: 3 | RNVC: 9

4 May 2015

3040-01-565-6498
Hydraulic Accumulator Cylinder

015656498
1H2H0A00000084: RNCC: 3 | RNVC: 2
GG731680A: RNCC: 5 | RNVC: 2
GG731680A: RNCC: 5 | RNVC: 9

1 Aug 2008

3040-01-579-0376
Linear Actuating Cylinder Assembly Parts Kit

015790376
498-8981: RNCC: 3 | RNVC: 2
V003506: RNCC: 3 | RNVC: 9
1026441: RNCC: 5 | RNVC: 9

28 Oct 2009

3040-01-585-7947
Manual Control Lever Assembly

015857947
J15932011-PC2: RNCC: 3 | RNVC: 2

7 Jun 2010

3040-01-477-7524
Rotary Actuating Cylinder Assembly

014777524
6372005627: RNCC: 3 | RNVC: 2

17 Aug 2000

3040-01-491-3925
Straight Shaft

014913925
H643-7003-64: RNCC: 3 | RNVC: 2
342-7067322-64: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

19 Oct 2001

3040-01-492-2837
Nonaircraft Mechanical Actuator

014922837
EJ-31157: RNCC: 3 | RNVC: 2
EJ-51248 ITEM 21: RNCC: 5 | RNVC: 2
EJ-51248: RNCC: D | RNVC: 9

20 Nov 2001

3040-01-494-4525
Clutch Locating Tab

014944525
DMG0021: RNCC: 3 | RNVC: 2
DMG0021: RNCC: 5 | RNVC: 2
F8199-000125: RNCC: 6 | RNVC: 9

12 Feb 2002

3040-01-469-2267
Linear Actuating Cylinder Assembly

014692267
AG201172F0: RNCC: 3 | RNVC: 2

8 Nov 1999

3040-01-476-5539
Spur Gearshaft

014765539
12757: RNCC: 3 | RNVC: 2
A-505-12757: RNCC: 5 | RNVC: 9

17 Jul 2000

3040-01-479-8397
Pneumatic Actuator Cylinder Housing

014798397
2-195-1-10015: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-486-4336
Straight Shaft

014864336
342-7067322-30: RNCC: 3 | RNVC: 2
H632-7003-30: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

28 Jun 2001

3040-01-546-1811
Linear Actuating Cylinder Assembly

015461811
112841: RNCC: 3 | RNVC: 2

8 Dec 2006

3040-01-478-2416
Linear Actuating Cylinder Assembly

014782416
MS2-3A-CC-6.00-46.25-HIM1A: RNCC: 3 | RNVC: 9
MS2-3A-CC-6.00-46.25-HIM1A: RNCC: 5 | RNVC: 2

1 Sep 2000

3040-01-492-2761
Linear Actuating Cylinder Assembly

014922761
86411790: RNCC: 3 | RNVC: 2
86411790: RNCC: 5 | RNVC: 1
86411790: RNCC: 5 | RNVC: 2

20 Nov 2001

3040-01-553-9093
Electrical-Fluid Pressure Connector Assembly

015539093
22596112: RNCC: 3 | RNVC: 2
22596112: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-524-7728
Linear Actuating Cylinder Assembly

015247728
4KK628: RNCC: 3 | RNVC: 2
4KK628: RNCC: 3 | RNVC: 9
499-2369: RNCC: 5 | RNVC: 2

15 Oct 2004

3040-01-512-2083
Brake Disc

015122083
90B3A3G067: RNCC: 3 | RNVC: 2
7D3-07771 ITEM 7: RNCC: 5 | RNVC: 2
7B8-07697: RNCC: 5 | RNVC: 2
7D3-07771: RNCC: D | RNVC: 9

26 Aug 2003

3040-01-474-9328
Straight Axle

014749328
270002: RNCC: 3 | RNVC: 2

17 May 2000

3040-01-482-7693
Rigid Connecting Link

014827693
805-1626433 PC 13: RNCC: 3 | RNVC: 2
1626433: RNCC: D | RNVC: 9

2 Mar 2001

3040-01-496-9790
Mechanical Drive Housing Part

014969790
7052744: RNCC: 3 | RNVC: 2

3 May 2002

3040-01-550-1729
Straight Shaft

015501729
18132: RNCC: 3 | RNVC: 2
6412: RNCC: 5 | RNVC: 9
6412: RNCC: 5 | RNVC: 9

11 Apr 2007

3040-01-483-9138
Gear Mechanism Suba

014839138
7225834: RNCC: 3 | RNVC: 2
D1217390: RNCC: 5 | RNVC: 2

11 Apr 2001

3040-01-510-8342
Shouldered Shaft

015108342
802-LPD17-624-001-3: RNCC: 3 | RNVC: 2
802-LPD17-624-001 PC 3: RNCC: 5 | RNVC: 2
LPD17-624-001: RNCC: D | RNVC: 9

28 Jul 2003

3040-01-556-2816
Shouldered Shaft

015562816
13016209: RNCC: 3 | RNVC: 2
13016209: RNCC: 5 | RNVC: 9

29 Sep 2007

3040-01-515-7530
Linear Actuating Cylinder Piston

015157530
AHC08095PRA: RNCC: 3 | RNVC: 2
C193915 REF.13,17,18,19-26: RNCC: 5 | RNVC: 2
R433082167: RNCC: 5 | RNVC: 2
P194127-3960: RNCC: 5 | RNVC: 2

8 Dec 2003

3040-01-516-4018
Single Disk Brake

015164018
6781342/AT16: RNCC: 3 | RNVC: 2
6304519-2: RNCC: 5 | RNVC: 2
A12918: RNCC: D | RNVC: 9

7 Jan 2004

3040-01-537-7978
Shaft Collar

015377978
12512232: RNCC: 3 | RNVC: 2
5015-03004: RNCC: 5 | RNVC: 9

24 Feb 2006

3040-01-491-0706
Rigid Connecting Link

014910706
74A400750-1005: RNCC: 3 | RNVC: 2
74A400750-1003: RNCC: E | RNVC: 8

12 Oct 2001

3040-01-515-4014
Shaft Retaining Plate

015154014
6935233: RNCC: 3 | RNVC: 2

24 Nov 2003

3040-01-532-4427
Straight Shaft Assembly

015324427
496-7861: RNCC: 3 | RNVC: 2
496-7861: RNCC: 5 | RNVC: 2

9 Aug 2005

3040-01-447-2738
Linear Actuating Cylinder Assembly

014472738
1643594: RNCC: 3 | RNVC: 2
CMG/403607: RNCC: 5 | RNVC: 2
CMG/403382: RNCC: 5 | RNVC: 9
403382: RNCC: 5 | RNVC: 9
403607: RNCC: 5 | RNVC: 9

31 Jul 1997

3040-01-464-6065
Straight Shaft

014646065
1353AS119-1: RNCC: 3 | RNVC: 2
1353AS119-1: RNCC: 5 | RNVC: 2

5 May 1999

3040-01-440-5147
Drag Brace Barrel

014405147
214-010-192-105: RNCC: 3 | RNVC: 2

16 Jan 1997

3040-01-391-5406
Bevel Gearshaft

013915406
10048075: RNCC: 3 | RNVC: 2
10048067: RNCC: 5 | RNVC: 9

14 Jun 1994

3040-01-420-8632
Manual Control Lever

014208632
D1VLB8NN72X4397: RNCC: 3 | RNVC: 2
DIVLB8NX4397: RNCC: 5 | RNVC: 9

26 Oct 1995

3040-01-393-3667
Spline Adapter

013933667
40020-1: RNCC: 3 | RNVC: 2
10002 ITEM 2: RNCC: 5 | RNVC: 2
40020 PART 40020-1: RNCC: 5 | RNVC: 2
10001 ITEM 2: RNCC: 5 | RNVC: 2

19 Jul 1994

3040-01-420-1151
Shouldered Shaft Assembly

014201151
H25-007-1210: RNCC: 3 | RNVC: 2
PL-H25C0700001 REF NO.62: RNCC: 5 | RNVC: 2

6 Oct 1995

3040-01-436-7076
Manual Control Lever

014367076
1764AS121-1: RNCC: 3 | RNVC: 2

26 Sep 1996

3040-01-437-2424
Linear Actuating Cylinder Assembly

014372424
TG10GWXXXXACA952: RNCC: 3 | RNVC: 2
7A8-08581: RNCC: 5 | RNVC: 2
CA952: RNCC: 5 | RNVC: 9

8 Oct 1996

3040-01-391-9966
Shouldered Shaft

013919966
8D0054-1: RNCC: 3 | RNVC: 2
8W0184 ITEM 27-4: RNCC: 5 | RNVC: 9
8D0054: RNCC: 5 | RNVC: 9

21 Jun 1994

3040-01-434-6150
Hydraulic-Pneumatic Cylinder Stop

014346150
G385044: RNCC: 3 | RNVC: 2

2 Aug 1996

3040-01-391-0732
Push-Pull Control Assembly

013910732
89162-402: RNCC: 3 | RNVC: 2
NO 58R: RNCC: 5 | RNVC: 9
NO 58R5: RNCC: 5 | RNVC: 9

3 Jun 1994

3040-01-453-8771
Cylinder Support

014538771
13790: RNCC: 3 | RNVC: 2
A6210750: RNCC: 5 | RNVC: 2
A6210750: RNCC: 5 | RNVC: 2

12 Mar 1998

3040-01-385-1281
Linear Actuating Cylinder Assembly

013851281
SKB161804: RNCC: 3 | RNVC: 2
AG170572A: RNCC: C | RNVC: 1
3.25CBB-2ATVS14: RNCC: C | RNVC: 1

4 Jan 1994

3040-01-461-8997
Linear Actuating Cylinder Assembly

014618997
1H2H0A00266269: RNCC: 3 | RNVC: 2
AG189982E0: RNCC: 3 | RNVC: 9
5038018: RNCC: 5 | RNVC: 9
1.50CF/H-2HLTVS13C X 82.000: RNCC: 5 | RNVC: 9
1H2H0A00029463: RNCC: 5 | RNVC: 9

11 Jan 1999

3040-01-391-6077
Bevel Gearshaft

013916077
10048069: RNCC: 3 | RNVC: 2

15 Jun 1994

3040-01-392-2427
Straight Shaft

013922427
11301-226: RNCC: 3 | RNVC: 2

26 Jun 1994

3040-01-411-3341
Straight Shaft

014113341
184080-5: RNCC: 3 | RNVC: 2
184080-5: RNCC: 5 | RNVC: 2

22 Mar 1995

3040-01-443-5964
Shouldered Shaft

014435964
NAS1057W5-025: RNCC: 3 | RNVC: 2
NAS1057W5-025: RNCC: 5 | RNVC: 2

14 Apr 1997

3040-01-315-2505
Rigid Connecting Link

013152505
5125986: RNCC: 3 | RNVC: 2
3040PL0956397: RNCC: 6 | RNVC: 9

13 Feb 1990

3040-01-339-1581
Shouldered Shaft

013391581
9334275: RNCC: 3 | RNVC: 2
9334275: RNCC: 5 | RNVC: 9

17 May 1991

3040-01-359-0633
Linear Actuating Cylinder Assembly Parts Kit

013590633
28718: RNCC: 3 | RNVC: 2

28 May 1992

3040-01-370-2889
Linear Actuating Cylinder Piston Rod

013702889
6-768-002503: RNCC: 3 | RNVC: 2
6-768-002503: RNCC: 5 | RNVC: 2
6-768-002503: RNCC: 5 | RNVC: 2

17 Jan 1993

3040-01-337-4172
Linear Actuating Cylinder Piston Rod

013374172
B-9602-A: RNCC: 3 | RNVC: 2
C-9602 ITEM-1: RNCC: 5 | RNVC: 2
D-9600: RNCC: D | RNVC: 9

14 Apr 1991

3040-01-326-0870
Linear Actuating Cylinder Assembly

013260870
MS2-3A-CC-6.00-51.625-HIM1A: RNCC: 3 | RNVC: 9
MS2-3A-CC-6.00-51.625-HIM1A: RNCC: 5 | RNVC: 2

18 Sep 1990

3040-01-332-1670
Worm Shaft

013321670
TAS653003S3: RNCC: 3 | RNVC: 2
TAS653003J9: RNCC: 5 | RNVC: 9

5 Jan 1991

3040-01-366-9410
Shouldered Shaft

013669410
364-47127-000: RNCC: 3 | RNVC: 2
376-67954-000 ITEM 3: RNCC: 5 | RNVC: 2
376-67966-000 ITEM 3: RNCC: 5 | RNVC: 2
364-47127C: RNCC: 5 | RNVC: 9
364-48756-000 ITEM 3: RNCC: C | RNVC: 1
364-48946-000 ITEM 97: RNCC: C | RNVC: 1
376-67954-000: RNCC: D | RNVC: 9
376-67966-000: RNCC: D | RNVC: 9

4 Nov 1992

3040-01-330-9513
Rigid Connecting Link

013309513
75D111208-2065: RNCC: 3 | RNVC: 2
75D11120: RNCC: D | RNVC: 9

12 Dec 1990

3040-01-357-8755
Shouldered Shaft

013578755
6397389-25: RNCC: 3 | RNVC: 2
639389 PIECE 25: RNCC: 5 | RNVC: 2
6397389: RNCC: D | RNVC: 9

3 May 1992

3040-01-309-1455
Remote Control Lever

013091455
1500AS114-2: RNCC: 3 | RNVC: 2
1500AS114-2: RNCC: 5 | RNVC: 2

11 Oct 1989

3040-01-367-5492
Controllable Swashplate

013675492
38-D2228: RNCC: 3 | RNVC: 2
D2223: RNCC: 5 | RNVC: 9

14 Nov 1992

3040-01-322-6295
Spur Gear Cluster

013226295
5544117: RNCC: 3 | RNVC: 2
5544117: RNCC: D | RNVC: 9

11 Jul 1990

3040-01-340-2329
Linear Actuating Cylinder Assembly

013402329
1332024: RNCC: 3 | RNVC: 2
1332024: RNCC: 5 | RNVC: 9
1317817: RNCC: 5 | RNVC: 9

11 Jun 1991

3040-01-325-9557
Linear Actuating Cylinder Piston

013259557
106-80012-027: RNCC: 3 | RNVC: 9
SS-3300-CPL-P20: RNCC: 5 | RNVC: 2
C12126: RNCC: 5 | RNVC: 9

14 Sep 1990

3040-01-337-4171
Linear Actuating Cylinder Piston Rod

013374171
B-9601-A: RNCC: 3 | RNVC: 2
C-9601 ITEM-1: RNCC: 5 | RNVC: 2
D-9600: RNCC: D | RNVC: 9

14 Apr 1991

3040-01-287-7906
Linear Actuating Cylinder

012877906
JV-94B2N-02.00-5.000-0100-N11-0: RNCC: 3 | RNVC: 2
JV-94B2N-02.00-5.000-0100-N11-0: RNCC: 3 | RNVC: 9
STC90868-61: RNCC: 5 | RNVC: 2
SRMHY90B2N-2-5-1-3000-DA: RNCC: 5 | RNVC: 9

27 Oct 1988

3040-01-252-3799
Brake Band And Lining

012523799
5210252: RNCC: 3 | RNVC: 2
5210252: RNCC: 5 | RNVC: 2

1 Apr 1987

3040-01-291-5850
Shouldered Shaft

012915850
12268240: RNCC: 3 | RNVC: 2

30 Dec 1988

3040-01-291-9718
Remote Control Lever

012919718
641-579: RNCC: 3 | RNVC: 2
641-579: RNCC: 3 | RNVC: 9
60-902 PIECE 579: RNCC: 5 | RNVC: 9
60-902: RNCC: D | RNVC: 9

9 Jan 1989

3040-01-256-9102
Pneumatic Actuator Cylinder Housing

012569102
1046057: RNCC: 3 | RNVC: 2
91316: RNCC: 5 | RNVC: 9

9 Jun 1987

3040-01-281-5918
Brake Shoe

012815918
898-071-715: RNCC: 3 | RNVC: 2
898-071-715: RNCC: 5 | RNVC: 9

28 Jun 1988

3040-01-289-8671
Shouldered Shaft

012898671
51740B024: RNCC: 3 | RNVC: 2
51740B024: RNCC: 5 | RNVC: 9

1 Dec 1988

3040-01-247-6055
Controllable Swashplate

012476055
733758: RNCC: 3 | RNVC: 2

9 Jan 1987

3040-01-258-6905
Shaft Collar

012586905
981 2334: RNCC: 3 | RNVC: 2

6 Jul 1987

3040-01-290-5060
Pawl

012905060
8644898: RNCC: 3 | RNVC: 2
8644898: RNCC: 5 | RNVC: 2

12 Dec 1988

3040-01-248-6993
Manual Control Lever

012486993
24-4597-5: RNCC: 3 | RNVC: 2

30 Jan 1987

3040-01-256-2258
Flexible Shaft Assembly

012562258
57714-05: RNCC: 3 | RNVC: 2
57714-5: RNCC: 5 | RNVC: 9

3 Jun 1987

3040-01-299-8819
Mechanical Drive Housing

012998819
1 425 627 006: RNCC: 3 | RNVC: 2

7 May 1989

3040-01-271-5017
Rigid Connecting Link

012715017
68A451008-1005: RNCC: 3 | RNVC: 2

26 Jan 1988

3040-01-292-2997
Remote Control Lever

012922997
7379924: RNCC: 3 | RNVC: 2

13 Jan 1989

3040-01-281-9304
Shaft Collar

012819304
8D0022-1: RNCC: 3 | RNVC: 2

4 Jul 1988

3040-01-298-2936
Linear Actuating Cylinder Assembly

012982936
AG111969B0: RNCC: 3 | RNVC: 2

14 Apr 1989

3040-01-249-1517
Rigid Connecting Link

012491517
12349739: RNCC: 3 | RNVC: 2
12349739: RNCC: 5 | RNVC: 2
12349739: RNCC: 5 | RNVC: 2
12349739: RNCC: 8 | RNVC: 1

6 Feb 1987

3040-01-294-6119
Linear Actuating Cylinder Assembly

012946119
537664: RNCC: 3 | RNVC: 2
CT537664: RNCC: 5 | RNVC: 2
CTS37664: RNCC: 5 | RNVC: 9

18 Feb 1989

3040-01-239-7518
Friction Lining

012397518
D-405259-30: RNCC: 3 | RNVC: 2

4 Sep 1986

3040-01-193-0869
Speedometer-Tachometer Drive Adapter

011930869
492753C91: RNCC: 3 | RNVC: 2
63360H: RNCC: 5 | RNVC: 9

30 Oct 1984

3040-01-229-5681
Guide Ammo

012295681
10519936: RNCC: 3 | RNVC: 2
10519936: RNCC: 5 | RNVC: 2

2 Apr 1986

3040-01-234-3329
Shaft Collar

012343329
A06491: RNCC: 3 | RNVC: 2
A06491Q: RNCC: C | RNVC: 1

13 Jun 1986

3040-01-199-7996
Pneumatic Actuator Cylinder Housing

011997996
70-28490 ITEM 1: RNCC: 3 | RNVC: 2
28947: RNCC: 3 | RNVC: 2
70-28490: RNCC: D | RNVC: 9

25 Jan 1985

3040-01-241-9140
Body Hub

012419140
12349950: RNCC: 3 | RNVC: 2
12349950: RNCC: 8 | RNVC: 1

4 Oct 1986

3040-01-117-7367
Rigid Connecting Link

011177367
145P1015-1: RNCC: 3 | RNVC: 2
145P1015-1: RNCC: 5 | RNVC: 2

21 Aug 1981

3040-01-127-5004
Ball Joint

011275004
5211308-1: RNCC: 3 | RNVC: 2
10106833: RNCC: 6 | RNVC: 9

2 Mar 1982

3040-01-178-3334
Grease Cap

011783334
781E835-029: RNCC: 3 | RNVC: 2
781E835-029: RNCC: 5 | RNVC: 2
781E835P29: RNCC: 5 | RNVC: 9

4 May 1984

3040-01-129-3028
Shouldered Shaft

011293028
31094: RNCC: 3 | RNVC: 9
31094: RNCC: 5 | RNVC: 2
1134090: RNCC: 5 | RNVC: 9
1134090: RNCC: 5 | RNVC: 9

4 Apr 1982

3040-01-140-0267
Rigid Connecting Link

011400267
295356-1: RNCC: 3 | RNVC: 2
295356: RNCC: 5 | RNVC: 1
295356-1: RNCC: 5 | RNVC: 9

7 Oct 1982

3040-01-165-9646
Flexible Shafting

011659646
410M003-054: RNCC: 3 | RNVC: 2
410M 54INOAL 3IN STR: RNCC: 5 | RNVC: 9
410M 541N0AL 31: RNCC: C | RNVC: 1
410M 54IN0/AL 3: RNCC: C | RNVC: 1
410M111A: RNCC: C | RNVC: 1

5 Nov 1983

3040-01-172-9001
Rigid Connecting Link

011729001
4F23660-135B: RNCC: 3 | RNVC: 2
4F23660-135A: RNCC: 5 | RNVC: 9
4F23660-131A: RNCC: C | RNVC: 1
4F23660-131A: RNCC: C | RNVC: 1
4F23660-133A: RNCC: C | RNVC: 1

28 Feb 1984

3040-01-134-3634
Control Cam

011343634
12312306: RNCC: 3 | RNVC: 2
12312306: RNCC: D | RNVC: 9

3 Jul 1982

3040-01-174-9465
Hub Planetary Ring Gear

011749465
3204P42: RNCC: 3 | RNVC: 2
N8568: RNCC: 5 | RNVC: 9

24 Mar 1984

3040-01-138-6715
Shouldered Shaft

011386715
973872-01: RNCC: 3 | RNVC: 2
973872-01: RNCC: 3 | RNVC: 9
RX-173872 PIECE 1: RNCC: 5 | RNVC: 9
973872-00: RNCC: 5 | RNVC: 9
973872-00PH: RNCC: 5 | RNVC: 9
RX-173872: RNCC: D | RNVC: 9

18 Sep 1982

3040-01-179-8752
Drive Shaft

011798752
P308087: RNCC: 3 | RNVC: 2
P308087: RNCC: 3 | RNVC: 9

22 May 1984

3040-01-186-3716
Nonrotating Shaft Eye Bracket

011863716
4684958-0001: RNCC: 3 | RNVC: 2
708-4684958 ITEM 1: RNCC: 5 | RNVC: 2
87841-0205: RNCC: D | RNVC: 9
708-4684958: RNCC: D | RNVC: 9

10 Aug 1984

3040-01-127-8989
Casing Assembly

011278989
013912: RNCC: 3 | RNVC: 2

11 Mar 1982

3040-01-083-5342
Mounting Kit Rod Assembly

010835342
12284033: RNCC: 3 | RNVC: 2
XM66184: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-00-962-9100
Shouldered Shaft

009629100
7041-5: RNCC: 3 | RNVC: 2
C7041-5: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-071-8396
Linear Actuating Cylinder Piston Rod

010718396
4687550-0001: RNCC: 3 | RNVC: 2
845-4687550-0001: RNCC: 5 | RNVC: 2
4687550-0001: RNCC: 5 | RNVC: 9
4687550-0001: RNCC: C | RNVC: 1
845-4687550: RNCC: D | RNVC: 9
2642-693-03: RNCC: D | RNVC: 9

15 Feb 1979

3040-01-047-9715
Shouldered Shaft

010479715
153-007-10: RNCC: 3 | RNVC: 2
0153-0007-1000: RNCC: C | RNVC: 1

16 Sep 1977

3040-01-060-8842
Piston Ring

010608842
9333-01-0560-407: RNCC: 3 | RNVC: 2
9333-00-0000 PIECE 56: RNCC: 5 | RNVC: 2
9333-00-0000 PIECE 56: RNCC: 5 | RNVC: 9
9333-01-0560-407: RNCC: 5 | RNVC: 9
9333-01-0560: RNCC: 5 | RNVC: 9
9333-00-0000: RNCC: 5 | RNVC: 9
9333-00-0000: RNCC: D | RNVC: 9

4 Jun 1978

3040-01-100-6455
Multiple Gears Gearshaft

011006455
12292361: RNCC: 3 | RNVC: 2

11 Sep 1980

3040-01-011-4927
Spur Gearshaft

010114927
742356: RNCC: 3 | RNVC: 2
742356: RNCC: 5 | RNVC: 2
742356: RNCC: 5 | RNVC: 2
742356: RNCC: 5 | RNVC: 2
742356: RNCC: 5 | RNVC: 2
742356: RNCC: 5 | RNVC: 9

23 Oct 1975

3040-01-092-3885
Straight Shaft

010923885
ZT82A-4: RNCC: 3 | RNVC: 2

25 Mar 1980

3040-01-033-3669
Straight Shaft

010333669
3102334-01: RNCC: 3 | RNVC: 9
3102334-01: RNCC: 5 | RNVC: 2
3102334-01: RNCC: C | RNVC: 1

5 Jan 1977

3040-01-069-5404
Stanchion Shaft

010695404
516173-1: RNCC: 3 | RNVC: 2

19 Dec 1978

3040-00-692-4628
Shouldered Shaft

006924628
116751: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-733-8909
Remote Control Lever

007338909
8351386: RNCC: 3 | RNVC: 2
3040007338909: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-690-1213
Remote Control Lever

006901213
10867062: RNCC: 3 | RNVC: 2
3040006901213: RNCC: 6 | RNVC: 9
10867061: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-679-9639
Shouldered Shaft

006799639
8756252: RNCC: 3 | RNVC: 2
2520006799639: RNCC: 5 | RNVC: 9
8756252: RNCC: 8 | RNVC: 2

1 Jan 1963

3040-00-761-9715
Straight Shaft

007619715
3-76524-5: RNCC: 3 | RNVC: 2
3-76524-5: RNCC: 5 | RNVC: 9
3-76524-5: RNCC: 5 | RNVC: 9
3-76524: RNCC: D | RNVC: 9

1 Jan 1962

3040-00-693-6531
Remote Control Lever

006936531
90-2340: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-691-2349
Mechanical Drive Housing

006912349
6774898: RNCC: 3 | RNVC: 2
10948273: RNCC: 5 | RNVC: 2
2520006912349: RNCC: 5 | RNVC: 9
6774898: RNCC: 5 | RNVC: 9
6774898: RNCC: 5 | RNVC: 9
2520006912349: RNCC: 6 | RNVC: 9
10948273: RNCC: 8 | RNVC: 2

1 Jan 1961

3040-00-480-2266
Linear Actuating Cylinder Assembly

004802266
G101281: RNCC: 3 | RNVC: 2
818-G101281: RNCC: 5 | RNVC: 2
C3299: RNCC: 5 | RNVC: 2
G34316: RNCC: 5 | RNVC: 9

12 Jun 1974

3040-00-614-6973
Bell Crank

006146973
11671041: RNCC: 3 | RNVC: 2
2530006146973: RNCC: 6 | RNVC: 9

12 Feb 1975

3040-00-450-2199
Gear Box Rod End

004502199
65356-04079-101: RNCC: 3 | RNVC: 2
65356-04079-101: RNCC: 5 | RNVC: 2

10 Dec 1969

3040-00-226-1997
Rigid Connecting Link

002261997
10941827: RNCC: 3 | RNVC: 2

3 Jan 1968

3040-00-291-0627
Linear Actuating Cylinder Assembly

002910627
5914-010: RNCC: 3 | RNVC: 2
5914-010: RNCC: 3 | RNVC: 9
5914: RNCC: D | RNVC: 9

1 Jan 1961

3040-00-202-2463
Rigid Connecting Link

002022463
4F55062-101A: RNCC: 3 | RNVC: 2
4F55062-101A: RNCC: 5 | RNVC: 2
4F55062-101A: RNCC: 5 | RNVC: 2

6 Apr 1973

3040-00-418-2346
Shouldered Shaft

004182346
955125-1: RNCC: 3 | RNVC: 2
955125: RNCC: D | RNVC: 9

20 Nov 1970

3040-00-045-7236
Roller Assy Shaft

000457236
415614-1: RNCC: 3 | RNVC: 2

9 May 1967

3040-00-021-9924
Flexible Shaft Assembly Casing

000219924
5011M82P1: RNCC: 1 | RNVC: 2
20400: RNCC: 3 | RNVC: 2
5007M51P2: RNCC: 3 | RNVC: 2
20400: RNCC: 5 | RNVC: 2
21677-1: RNCC: 5 | RNVC: 2
5007M51P2: RNCC: 5 | RNVC: 9
5011M82P1: RNCC: 5 | RNVC: 9
21677-1: RNCC: 5 | RNVC: 9
336C421G5: RNCC: E | RNVC: 8
336C421G5: RNCC: E | RNVC: 8

1 Jan 1961

3040-00-143-7166
Hydraulic Accumulator

001437166
508469-2: RNCC: 3 | RNVC: 2
508469-2: RNCC: 5 | RNVC: 2
508469-2: RNCC: 5 | RNVC: 2

25 Jun 1969

3040-00-169-0602
Shouldered Shaft

001690602
413531-3: RNCC: 3 | RNVC: 2

9 Dec 1970

3040-00-070-3667
Differential Gear Unit

000703667
100732: RNCC: 3 | RNVC: 2
100732: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-110-5973
Counterbalance Weight

001105973
9642M30P06: RNCC: 3 | RNVC: 2

9 Aug 1968

3040-99-870-6454
Rigid Connecting Link

998706454
MBEU140817: RNCC: 3 | RNVC: 2
B-MBEU140817: RNCC: 5 | RNVC: 2

7 Nov 1992

3040-99-253-1908
Bevel Gear And Shaft Assembly

992531908
B508876: RNCC: 3 | RNVC: 2
B517327: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-01-679-2473
Shouldered Shaft

016792473
4453695: RNCC: 3 | RNVC: 2

15 Mar 2019

3040-01-647-5318
Straight Shaft

016475318
8001107-1: RNCC: 3 | RNVC: 2

24 Aug 2015

3040-01-455-2345
Flex Connecting Rod

014552345
A8-99-111-0147: RNCC: 3 | RNVC: 2
11478687-11: RNCC: 5 | RNVC: 2
11478687: RNCC: D | RNVC: 9

27 Apr 1998

3040-01-365-2575
Straight Shaft

013652575
MBEU140478: RNCC: 3 | RNVC: 2
MBEU140478: RNCC: 5 | RNVC: 2
MBEU140478: RNCC: 5 | RNVC: 2

4 Oct 1992

3040-01-231-9141
Linear Actuating Cylinder Piston

012319141
12321957: RNCC: 3 | RNVC: 2

6 May 1986

3040-01-214-1606
Control Cam

012141606
23018145: RNCC: 3 | RNVC: 2
23018145: RNCC: 8 | RNVC: 2

6 Aug 1985

3040-01-077-3034
Linear Actuating Cylinder Assembly

010773034
SYLC823: RNCC: 3 | RNVC: 2

22 May 1979

3040-00-922-3808
Rigid Connecting Link

009223808
4F73257-105A: RNCC: 3 | RNVC: 2
4F73257-101A: RNCC: 5 | RNVC: 9

17 Apr 1968

3040-99-403-4380
Non Propeller Shaft

3040-01-626-9069
Shouldered Shaft

016269069
66-21545-1: RNCC: 3 | RNVC: 2

25 Mar 2014

3040-14-546-6561
Hydraulic Control Assembly

145466561
44040283AA: RNCC: 3 | RNVC: 2
44040283AA: RNCC: 5 | RNVC: 2

26 Jul 2005

3040-01-623-8569
Extension Shaft

016238569
12500631: RNCC: 3 | RNVC: 2

5 Dec 2013

3040-01-628-1253
Straight Shaft

016281253
14002215: RNCC: 3 | RNVC: 2
14002215: RNCC: 3 | RNVC: 9

9 May 2014

3040-01-683-7234
Piston Ring

016837234
A6601-1: RNCC: 3 | RNVC: 2
A-6601-Z: RNCC: 5 | RNVC: 2
D-6600/ACC DOC NSWCPD-0132-19: RNCC: D | RNVC: 9
6601-Z: RNCC: D | RNVC: 9

3 Oct 2019

3040-01-687-5116
Straight Shaft Assembly

016875116
814150-6: RNCC: 3 | RNVC: 2

6 Apr 2020

3040-01-666-3080
Nonaircraft Mechanical Actuator

016663080
B-25225-HH-325 PART NO.15: RNCC: 3 | RNVC: 2
B-25225-HH-325: RNCC: D | RNVC: 9

31 Aug 2017

3040-01-614-5747
Housing Adapter

016145747
12542965: RNCC: 3 | RNVC: 2

7 Dec 2012

3040-01-626-7806
Multiple Gears Gearshaft

016267806
14000277: RNCC: 3 | RNVC: 2
14000277: RNCC: 3 | RNVC: 9

20 Mar 2014

3040-01-633-8445
Shaft Collar

016338445
167-8278269 PC 15: RNCC: 3 | RNVC: 2
167-7563785 PC NO.120: RNCC: 3 | RNVC: 2
803-6397269 PC 92: RNCC: 5 | RNVC: 2

5 Dec 2014

3040-01-632-0483
Shouldered Shaft

016320483
14001102: RNCC: 3 | RNVC: 2
14001102: RNCC: 3 | RNVC: 9

6 Oct 2014

3040-01-632-6258
Manual Control Lever

016326258
845-8219247-069: RNCC: 3 | RNVC: 2
845-8219247: RNCC: D | RNVC: 9

24 Oct 2014

3040-01-622-9648
Straight Shaft

016229648
13847633: RNCC: 3 | RNVC: 2

28 Oct 2013

3040-01-675-7623
Rigid Connecting Link

016757623
001-002316-000: RNCC: 3 | RNVC: 2

25 Sep 2018

3040-01-559-4859
Housing Adapter

015594859
AFP-K20-S20-2.00-S1-B-BS1: RNCC: 3 | RNVC: 2
AFP-K20-S20-2.00-S1-B-BS1: RNCC: 5 | RNVC: 2

19 Dec 2007

3040-01-574-5418
Linear Actuating Cylinder Assembly

015745418
386258: RNCC: 3 | RNVC: 2
386258: RNCC: 5 | RNVC: 2

1 Jun 2009

3040-01-573-4327
Linear Actuating Cylinder

015734327
22951-1: RNCC: 3 | RNVC: 2

22 Apr 2009

3040-01-589-5695
Forward Drive Mount

015895695
1600902-5: RNCC: 3 | RNVC: 2
1600902-5: RNCC: 5 | RNVC: 2
1600902-5 RC: RNCC: 5 | RNVC: 9

30 Oct 2010

3040-01-553-8155
Aircraf Pinion Gear

015538155
188871-1: RNCC: 3 | RNVC: 2

26 Jul 2007

3040-01-560-4761
Shouldered Shaft

015604761
6405736 FIND SGMF-C5: RNCC: 3 | RNVC: 2
566-6405736-SGMF-C5: RNCC: 5 | RNVC: 2

31 Jan 2008

3040-01-562-8365
Remote Control Lever

015628365
3645643: RNCC: 3 | RNVC: 2
3645643: RNCC: 5 | RNVC: 9

23 Apr 2008

3040-01-576-7800
Body Hub

015767800
A88401564X: RNCC: 3 | RNVC: 2

13 Aug 2009

3040-01-564-5720
Rigid Connecting Link

015645720
55-15-0009: RNCC: 3 | RNVC: 2
55-15-0009: RNCC: 3 | RNVC: 9

20 Jun 2008

3040-01-597-3690
Linear Actuating Cylinder Piston Rod

015973690
0974902: RNCC: 3 | RNVC: 2

8 Jun 2011

3040-01-574-5398
Breather

015745398
1582161: RNCC: 3 | RNVC: 2
1582161: RNCC: 5 | RNVC: 2
1582161: RNCC: 5 | RNVC: 2

1 Jun 2009

3040-01-578-6147
Linear Actuating Cylinder Cap

015786147
2184993: RNCC: 3 | RNVC: 2

14 Oct 2009

3040-01-522-2125
Linear Actuating Cylinder Head

015222125
064 135: RNCC: 3 | RNVC: 2
300-064135: RNCC: 5 | RNVC: 2
064135: RNCC: 5 | RNVC: 9
064135: RNCC: 5 | RNVC: 9

22 Jul 2004

3040-01-534-6454
Mechanically Actuated Spindle

015346454
803-6397269 REV A PC NO 95: RNCC: 3 | RNVC: 2

28 Oct 2005

3040-01-524-9770
Inertia Damper

015249770
JE140317X26S6L: RNCC: 3 | RNVC: 2
JE-1403 ASSEMBLY 6: RNCC: 5 | RNVC: 2

25 Oct 2004

3040-01-511-5509
Linear Actuating Cylinder Assembly

015115509
2717080: RNCC: 3 | RNVC: 2
6623848: RNCC: 5 | RNVC: 9
6623848: RNCC: 5 | RNVC: 9

12 Aug 2003

3040-01-491-5008
Nonaircraft Mechanical Actuator

014915008
22002-25: RNCC: 3 | RNVC: 2
22002-25: RNCC: 5 | RNVC: 2
B-800-22002-25: RNCC: 5 | RNVC: 2
22002-5: RNCC: 5 | RNVC: 9
22002: RNCC: D | RNVC: 9

24 Oct 2001

3040-01-476-7534
Mechanically Actuated Spindle

014767534
8100-1251-0310 PC 314: RNCC: 3 | RNVC: 2
8100-1251-0310: RNCC: D | RNVC: 9

20 Jul 2000

3040-01-464-4404
Flexible Shaft Assembly Core

014644404
57353-30: RNCC: 3 | RNVC: 2
57353: RNCC: D | RNVC: 9

29 Apr 1999

3040-01-453-7807
Rigid Connecting Link

014537807
4609-543-G: RNCC: 3 | RNVC: 2
4609-543: RNCC: 5 | RNVC: 2
17B9F1112-543: RNCC: 5 | RNVC: 2

10 Mar 1998

3040-01-441-4382
Spur Gearshaft

014414382
83730-DD: RNCC: 3 | RNVC: 2
83730: RNCC: 3 | RNVC: 9
83913-1 IT17: RNCC: 5 | RNVC: 9

12 Feb 1997

3040-01-493-8231
Shouldered Shaft

014938231
080-31-SP211: RNCC: 3 | RNVC: 2
080DH2-211 ITEM 3: RNCC: 5 | RNVC: 9
080DH2-211: RNCC: D | RNVC: 9

22 Jan 2002

3040-01-482-4755
Rigid Connecting Link

014824755
8100-1251-0192 PC 137: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 70: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

23 Feb 2001

3040-01-446-3620
Linear Actuating Cylinder Assembly

014463620
403236: RNCC: 3 | RNVC: 2
1643482: RNCC: 5 | RNVC: 2
CMG/403236: RNCC: 5 | RNVC: 2

1 Jul 1997

3040-01-444-3239
Shouldered Shaft

014443239
901-047-580-107: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-455-5175
Mechanical Housing

014555175
28018601: RNCC: 3 | RNVC: 2
280-010-03: RNCC: 3 | RNVC: 9
280-000-04 ITEM 11: RNCC: 5 | RNVC: 2
280-010-03: RNCC: 5 | RNVC: 9
280-000-04 ITEM 11: RNCC: 5 | RNVC: 9
280-010-03: RNCC: C | RNVC: 1

6 May 1998

3040-01-453-7810
Rigid Connecting Link

014537810
4609-551: RNCC: 3 | RNVC: 2
17B9F1112-551: RNCC: 5 | RNVC: 2

10 Mar 1998

3040-01-468-0838
Nonaircraft Mechanical Actuator

014680838
15662091-1: RNCC: 3 | RNVC: 2
15666126-1: RNCC: 5 | RNVC: 9
15662090 FN 29: RNCC: 5 | RNVC: 9
15662091-1: RNCC: 5 | RNVC: 9
J15662091-1: RNCC: 5 | RNVC: 9

28 Sep 1999

3040-01-423-8040
Nonrotating Shaft Eye Bracket

014238040
WCC442 LEFT: RNCC: 3 | RNVC: 2
2-4005-A FIND NO. 14: RNCC: 5 | RNVC: 2
2-4005-C FIND NO. 14: RNCC: 5 | RNVC: 9
2-4005-B FIND NO. 14: RNCC: 5 | RNVC: 9
2-4312-9FIND NO 14: RNCC: C | RNVC: 1
2-4005-A: RNCC: D | RNVC: 9
WCC442: RNCC: D | RNVC: 9
2-4005-B: RNCC: D | RNVC: 9

11 Jan 1996

3040-01-368-6667
Shaft Coupling Half

013686667
70351-08206-102: RNCC: 3 | RNVC: 2
70351-08206-102: RNCC: 5 | RNVC: 2
70351-08206-102: RNCC: 5 | RNVC: 2
70351-08206-102: RNCC: 5 | RNVC: 2
70351-08206-102: RNCC: 5 | RNVC: 2
70351-08206-102: RNCC: 5 | RNVC: 2
70351-08206-102: RNCC: 7 | RNVC: 2
70351-08206: RNCC: D | RNVC: 9

5 Dec 1992

3040-01-387-4048
Rigid Connecting Link

013874048
D1046-03-G: RNCC: 3 | RNVC: 2
KTI-387-4048: RNCC: 5 | RNVC: 2
138K0080: RNCC: 5 | RNVC: 2
SPN00464: RNCC: 5 | RNVC: 2
CTC-1012-23-1: RNCC: 5 | RNVC: 2
138K0080: RNCC: 5 | RNVC: 9

4 Mar 1994

3040-01-361-8202
Linear Actuating Cylinder Assembly Parts Kit

013618202
23524340: RNCC: 3 | RNVC: 2
23519142: RNCC: 5 | RNVC: 9
23514258: RNCC: 5 | RNVC: 9
23503830: RNCC: 5 | RNVC: 9

26 Jul 1992

3040-01-383-8645
Linear Actuating Cylinder Piston

013838645
87621-0105 ITEM 3: RNCC: 3 | RNVC: 2
518-4674751 ITEM 3MOD: RNCC: 5 | RNVC: 9
4674751-0003A: RNCC: 5 | RNVC: 9
518-4674751 ITE: RNCC: C | RNVC: 1

4 Dec 1993

3040-01-413-1361
Rigid Connecting Link

014131361
8741903: RNCC: 3 | RNVC: 2
8741900: RNCC: D | RNVC: 9

5 May 1995

3040-01-415-7404
Linear Actuating Cylinder Cap

014157404
002-9223-969: RNCC: 3 | RNVC: 2
1Q8901-0010-01A ITEM 2: RNCC: 5 | RNVC: 2
1Q8901-0010-01A: RNCC: D | RNVC: 9

5 Jul 1995

3040-01-390-3143
Flexible Drive Shaft

013903143
52D341-2: RNCC: 3 | RNVC: 2
52D341-2: RNCC: 5 | RNVC: 2
3040PL1652039: RNCC: 6 | RNVC: 9

16 May 1994

3040-01-410-8104
Shouldered Shaft

014108104
12364630: RNCC: 3 | RNVC: 2
12364630: RNCC: 5 | RNVC: 2

12 Mar 1995

3040-01-389-6436
Shouldered Shaft

013896436
12385235: RNCC: 3 | RNVC: 2

27 Apr 1994

3040-01-392-2952
Hydraulic Cylinder Gland Assembly

013922952
L045720000: RNCC: 3 | RNVC: 2
L04572000: RNCC: C | RNVC: 1
AG175142B0: RNCC: D | RNVC: 9

27 Jun 1994

3040-01-413-1363
Rigid Connecting Link

014131363
8741957: RNCC: 3 | RNVC: 2
8741900: RNCC: D | RNVC: 9

5 May 1995

3040-01-317-5379
Manual Control Lever

013175379
4414-046: RNCC: 3 | RNVC: 2
4414-046: RNCC: 5 | RNVC: 2
4414-046: RNCC: 5 | RNVC: 2

31 Mar 1990

3040-01-323-9840
Remote Control Lever

013239840
7002593-2: RNCC: 3 | RNVC: 2
7002593-2: RNCC: 5 | RNVC: 2

7 Aug 1990

3040-01-334-4900
Straight Shaft

013344900
36-155-110: RNCC: 3 | RNVC: 2

23 Feb 1991

3040-01-340-5913
Shouldered Shaft

013405913
70700-20130-102: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-342-0644
Housing Adapter

013420644
115644162: RNCC: 3 | RNVC: 2
115654161 PC 16: RNCC: 5 | RNVC: 2

14 Jul 1991

3040-01-283-2008
Linear Actuating Cylinder Piston Rod

012832008
12427761: RNCC: 3 | RNVC: 2
12427761: RNCC: 3 | RNVC: 9
9230B: RNCC: 5 | RNVC: 2
9230B: RNCC: 5 | RNVC: 9
12427761: RNCC: 5 | RNVC: 9
9230B: RNCC: 5 | RNVC: 9
9230B: RNCC: 5 | RNVC: 9

30 Jul 1988

3040-01-264-9349
Rigid Connecting Link

012649349
518-4457080 PART 8: RNCC: 3 | RNVC: 2
2013-42 PART 8: RNCC: 5 | RNVC: 2

8 Oct 1987

3040-01-284-6224
Shoe Type Brake

012846224
507229: RNCC: 3 | RNVC: 2
536292: RNCC: 3 | RNVC: 2
507229: RNCC: 5 | RNVC: 9
536292: RNCC: 5 | RNVC: 9

26 Aug 1988

3040-01-276-6966
Shouldered Shaft

012766966
006-SND-002-300: RNCC: 3 | RNVC: 2
D-006-SND-0-02-320: RNCC: 5 | RNVC: 2
006-SND-200-320: RNCC: 5 | RNVC: 2

12 Apr 1988

3040-01-314-1136
Bevel Gearshaft

013141136
70351-38104-102: RNCC: 3 | RNVC: 2
70351-38104-102: RNCC: 5 | RNVC: 9
70351-38104: RNCC: D | RNVC: 9

24 Jan 1990

3040-01-271-6244
Rigid Connecting Link

012716244
3161452-7: RNCC: 3 | RNVC: 2
3161452-5: RNCC: E | RNVC: 8

28 Jan 1988

3040-01-273-5615
Shouldered Shaft

012735615
2B1-2395: RNCC: 3 | RNVC: 2
2B1-2395: RNCC: 5 | RNVC: 9
2D3-990 ITEM 17: RNCC: C | RNVC: 1
2D3-990 PC 17: RNCC: C | RNVC: 1

26 Feb 1988

3040-01-223-8796
Rigid Connecting Link

012238796
12313451: RNCC: 3 | RNVC: 2
12313451: RNCC: 5 | RNVC: 2
12313451: RNCC: 5 | RNVC: 2
12313451: RNCC: 8 | RNVC: 1

9 Jan 1986

3040-01-230-6413
Shouldered Shaft

012306413
BL-11480-1: RNCC: 3 | RNVC: 2
BL-10588-1: RNCC: 5 | RNVC: 9

16 Apr 1986

3040-01-252-5911
Bell Crank

012525911
212-011-705-001: RNCC: 3 | RNVC: 2

5 Apr 1987

3040-01-224-1700
Worm Shaft

012241700
60-301-0012-3: RNCC: 3 | RNVC: 2
SR0492/1: RNCC: 5 | RNVC: 2

13 Jan 1986

3040-01-232-0575
Shouldered Shaft

012320575
367706-1: RNCC: 3 | RNVC: 2
367706-1: RNCC: 5 | RNVC: 2

7 May 1986

3040-01-225-8622
Shaft Collar

012258622
11440272: RNCC: 3 | RNVC: 2
11440272: RNCC: 5 | RNVC: 1

8 Feb 1986

3040-01-232-5260
Bell Crank

012325260
160D122010-3: RNCC: 3 | RNVC: 2
160D122010-3: RNCC: 5 | RNVC: 2
160D122010-3: RNCC: 5 | RNVC: 2
160D122010-3: RNCC: 5 | RNVC: 2
160D122010-3: RNCC: 5 | RNVC: 2
160D122010-3: RNCC: 5 | RNVC: 2
160D122010-3: RNCC: 5 | RNVC: 2
160D122010-3: RNCC: 5 | RNVC: 9

16 May 1986

3040-01-184-4632
Linear Actuating Cylinder Assembly

011844632
5J0778: RNCC: 3 | RNVC: 2
5J778: RNCC: 5 | RNVC: 9

18 Jul 1984

3040-01-148-9431
Shouldered Shaft

011489431
037-71455: RNCC: 3 | RNVC: 2

13 Mar 1983

3040-01-180-8435
Water Pump Shaft

011808435
P204425: RNCC: 3 | RNVC: 2
P204425: RNCC: 3 | RNVC: 9

4 Jun 1984

3040-01-156-7168
Straight Shaft

011567168
2495673: RNCC: 3 | RNVC: 2
2495673: RNCC: 3 | RNVC: 9
2495673: RNCC: 5 | RNVC: 9
2495673: RNCC: C | RNVC: 1

23 Jun 1983

3040-01-139-3179
Shaft Collar

011393179
2046366-1: RNCC: 3 | RNVC: 2
2046366-1: RNCC: 5 | RNVC: 9
10106905: RNCC: 6 | RNVC: 9

29 Sep 1982

3040-01-171-4992
Shaft Collar

011714992
1056U-000D: RNCC: 3 | RNVC: 2
1056U-000D: RNCC: 5 | RNVC: 9

8 Feb 1984

3040-01-163-8814
Dishwasher Conveyor Shaft

011638814
975-41: RNCC: 3 | RNVC: 2

9 Oct 1983

3040-01-172-6799
Gearshaft

011726799
102-218-020-421-000: RNCC: 3 | RNVC: 2
SM0038 ITEM 12: RNCC: 5 | RNVC: 2

24 Feb 1984

3040-01-181-1797
Straight Shaft

011811797
P404830: RNCC: 3 | RNVC: 2
P404830: RNCC: 5 | RNVC: 9

7 Jun 1984

3040-01-084-2808
Linear Actuating Cylinder

010842808
4685194-0002: RNCC: 3 | RNVC: 2
704-4685193 ITEM 3: RNCC: 5 | RNVC: 2
4685194-0002: RNCC: 5 | RNVC: 2
704-4685193: RNCC: D | RNVC: 9
4685194: RNCC: D | RNVC: 9

14 Oct 1979

3040-01-100-4992
Spur Gearshaft

011004992
3887K76P004: RNCC: 3 | RNVC: 2
3887K76: RNCC: D | RNVC: 9

7 Sep 1980

3040-01-084-0021
Control Cam

010840021
12283758: RNCC: 3 | RNVC: 2

6 Oct 1979

3040-01-075-5636
Push-Pull Control Assembly

010755636
180-L-TT-3-68: RNCC: 3 | RNVC: 2
180-L-TT-3-68: RNCC: 3 | RNVC: 9

23 Apr 1979

3040-01-088-1128
Eccentric Shaft

010881128
9240-003-17: RNCC: 3 | RNVC: 2
26800116: RNCC: 5 | RNVC: 9
9240-003: RNCC: D | RNVC: 9

6 Jan 1980

3040-01-115-8278
Shouldered Shaft

011158278
3860101-3: RNCC: 3 | RNVC: 2
3860101-2: RNCC: 5 | RNVC: 9
3860101: RNCC: D | RNVC: 9

15 Jul 1981

3040-01-123-4942
Linear Actuating Cylinder Assembly Parts Kit

011234942
5740462: RNCC: 3 | RNVC: 2
7817529: RNCC: 5 | RNVC: 9
7817529: RNCC: 5 | RNVC: 9
3040PL0778402: RNCC: 6 | RNVC: 9

13 Dec 1981

3040-01-127-9537
Helical Gearshaft

011279537
915116: RNCC: 3 | RNVC: 2
915116: RNCC: 5 | RNVC: 2
915116-29 TOOTH: RNCC: 5 | RNVC: 9

11 Mar 1982

3040-00-915-7287
Straight Shaft

009157287
65301-03007-101: RNCC: 3 | RNVC: 2
65301-03007-001: RNCC: 5 | RNVC: 2
65301-03007-101: RNCC: 5 | RNVC: 2
65301-03007-101: RNCC: 8 | RNVC: 2

31 Oct 1965

3040-01-031-7565
Hydraulic Accumulator Cylinder

010317565
2505795: RNCC: 3 | RNVC: 2

2 Dec 1976

3040-01-066-3368
Hilock Collar

010663368
HL86PB-16: RNCC: 3 | RNVC: 2
HL86PB-16: RNCC: 3 | RNVC: 2
HL86PB-16: RNCC: 5 | RNVC: 2
HL86PB-16: RNCC: 5 | RNVC: 2
HL86PB-16: RNCC: 5 | RNVC: 2
HL86PB-16: RNCC: 5 | RNVC: 2
HL86PB-16: RNCC: 5 | RNVC: 2
HL86PB-16: RNCC: 5 | RNVC: 9

7 Oct 1978

3040-01-057-6545
Worm Shaft

010576545
11741741: RNCC: 3 | RNVC: 2

17 Mar 1978

3040-00-799-0078
Rigid Connecting Link

007990078
731698PC5: RNCC: 3 | RNVC: 2
3040PL1339096: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-723-9553
Straight Shaft

007239553
1751054: RNCC: 3 | RNVC: 2
1751054: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-798-4203
Mechanical Drive Housing

007984203
14711-504: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-670-6854
Linear Actuating Cylinder Piston Rod

006706854
63C52638-9: RNCC: 3 | RNVC: 2
63C52638-9: RNCC: 3 | RNVC: 9
56A23540-2: RNCC: 5 | RNVC: 9
56B23540-1: RNCC: 5 | RNVC: 9
56B23540-2: RNCC: 5 | RNVC: 9
63C52638-7: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-615-8803
Rigid Connecting Link

006158803
8741954: RNCC: 3 | RNVC: 2
8741900: RNCC: D | RNVC: 9

15 Feb 1975

3040-00-679-7375
Ball Screw

006797375
SK3806-11-1: RNCC: 3 | RNVC: 2

26 Jan 1968

3040-00-888-5190
Counterbalance Weight

008885190
436263CL1: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-456-8647
Straight Shaft

004568647
49710-1: RNCC: 3 | RNVC: 2
49710-1: RNCC: 5 | RNVC: 9
49710: RNCC: D | RNVC: 9

25 Apr 1969

3040-00-533-9118
Bell Crank

005339118
5-65371-10: RNCC: 3 | RNVC: 2
5-65371-10: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-326-8095
Remote Control Lever

003268095
3151-021: RNCC: 3 | RNVC: 2
3151-021: RNCC: 3 | RNVC: 9

3 Dec 1973

3040-00-329-1067
L Cylinder Assembly

003291067
VMC0900-101: RNCC: 3 | RNVC: 2
VMC0900-101: RNCC: 5 | RNVC: 2
VMC0900-101: RNCC: 5 | RNVC: 9
7545921-10: RNCC: 5 | RNVC: 9

3 Dec 1973

3040-00-451-6071
Straight Shaft

004516071
L19489: RNCC: 3 | RNVC: 2

27 May 1971

3040-00-471-5655
Manual Control Lever

004715655
2584858: RNCC: 3 | RNVC: 2

11 Jan 1971

3040-00-495-3024
Flexible Shaft Assembly Core

004953024
S14568-803: RNCC: 3 | RNVC: 2
14568-803: RNCC: 3 | RNVC: 9
14568-803: RNCC: 5 | RNVC: 9

18 Jun 1971

3040-00-038-7789
Rigid Connecting Link

000387789
123C10204-501: RNCC: 3 | RNVC: 2
123C10204-501: RNCC: 5 | RNVC: 2
123C10204-501: RNCC: 5 | RNVC: 9
123C10204-1: RNCC: C | RNVC: 1

13 Nov 1972

3040-00-179-5502
Shouldered Shaft

001795502
10913311: RNCC: 3 | RNVC: 2

20 Nov 1968

3040-00-306-3637
Emergency Exit Shaft Assembly

003063637
342458: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-764-7895
Rigid Connecting Link

007647895
ALK4SP10: RNCC: 3 | RNVC: 2

15 Apr 1972

3040-00-221-7665
Rigid Connecting Link

002217665
4Y01003-133A: RNCC: 3 | RNVC: 2

16 Jun 1969

3040-00-008-0212
Counterbalance Weight

000080212
2779K34P007: RNCC: 3 | RNVC: 2

16 Jul 1972

NSN 3040-00-332-0065 003320065 GEARSHAFT,MULTIPLE GEARS

3040-00-332-0065
Multiple Gears Gearshaft

003320065
7972958: RNCC: 3 | RNVC: 2
3040003320065: RNCC: 5 | RNVC: 9
3040003320065: RNCC: 6 | RNVC: 9

1 Jan 1963

NSN 3040-00-332-0064 003320064 GEARSHAFT,MULTIPLE GEARS

3040-00-332-0064
Multiple Gears Gearshaft

003320064
7972957: RNCC: 3 | RNVC: 2
3040003320064: RNCC: 6 | RNVC: 9

1 Jan 1963

NSN 3040-00-371-7302 003717302 LINING,FRICTION

3040-00-371-7302
Friction Lining

003717302
1073: RNCC: 3 | RNVC: 2
1073: RNCC: 3 | RNVC: 9
43729DC: RNCC: 5 | RNVC: 2
43729DA: RNCC: 5 | RNVC: 9
43729DB: RNCC: 5 | RNVC: 9
43729DB: RNCC: 5 | RNVC: 9
43729DC: RNCC: 5 | RNVC: 9

1 Jan 1963

NSN 3040-00-522-0409 005220409 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-00-522-0409
Linear Actuating Cylinder Assembly

005220409
11674160: RNCC: 3 | RNVC: 2
1015005220409: RNCC: 6 | RNVC: 9

19 Aug 1974

3040-33-106-6089
Hydraulic Accumulator Cylinder

331066089
-30620-C9600: RNCC: 3 | RNVC: 2
-30620-C9610: RNCC: 3 | RNVC: 2

16 Sep 1998

3040-14-412-4193
Cylind Piston Ecrou

144124193
2082354: RNCC: 3 | RNVC: 2
208P2354: RNCC: 5 | RNVC: 2
FOE2082354: RNCC: 5 | RNVC: 9

15 Oct 1986

3040-14-259-3296
Remote Control Lever

142593296
253-5M313P28B: RNCC: 3 | RNVC: 9
PA253-5M313P28B: RNCC: 5 | RNVC: 9

1 Jan 1969

3040-14-237-2245

3040-14-246-7434

3040-12-373-6513
Shouldered Shaft

123736513
X00011163: RNCC: 3 | RNVC: 2

23 Nov 2007

3040-12-197-7776
Remote Control Lever

121977776
1422002207: RNCC: 3 | RNVC: 2
1422002207: RNCC: 5 | RNVC: 2

22 Nov 1983

3040-34-030-3493
Straight Shaft Assembly

340303493
8-97035-557-0: RNCC: 3 | RNVC: 2
8-97035-557-0: RNCC: 6 | RNVC: 9

29 Sep 2003

3040-99-732-3622
Shaft Coupling Half

997323622
E993/429: RNCC: 3 | RNVC: 1
E993/429 PUMP HALF: RNCC: 5 | RNVC: 2
A825/136 ITEM 44: RNCC: 5 | RNVC: 2
A825/136-44: RNCC: 5 | RNVC: 2
E993/429: RNCC: 6 | RNVC: 9
G83711A: RNCC: 6 | RNVC: 9
3/4VX9L: RNCC: 6 | RNVC: 9

25 Apr 1991

3040-99-719-4304
Control Camshaft

997194304
345-163: RNCC: 3 | RNVC: 2
345-3: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-27-057-1561
Saft

270571561
8-002-002-1-10: RNCC: 2 | RNVC: 1

26 Jun 2012

3040-14-422-3867
Control Cam

144223867
NO PRIMARY REF14-422-3867: RNCC: 3 | RNVC: 2
224093: RNCC: 5 | RNVC: 2

3 Mar 1988

3040-12-319-1037
Shouldered Shaft

123191037
704-122200-915-0: RNCC: 3 | RNVC: 2

8 Sep 1989

3040-33-210-3926
Linear Actuating Cylinder Assembly

332103926
HSGL01-50/28 X 145-E1301: RNCC: 3 | RNVC: 2

27 Sep 2012

3040-99-551-9309
Straight Shaft

995519309
NO PRIMARY REF 99-551-9309: RNCC: 3 | RNVC: 2
81202405: RNCC: 5 | RNVC: 2
81202405: RNCC: 5 | RNVC: 9
81202405: RNCC: 6 | RNVC: 9

17 Nov 2010

3040-14-485-3339
Straight Axle

144853339
3090-144: RNCC: 3 | RNVC: 2
3090-144: RNCC: 3 | RNVC: 2
72-022-07: RNCC: 5 | RNVC: 2
Q1910145: RNCC: 5 | RNVC: 2
3090-144: RNCC: 5 | RNVC: 9
72-022-07: RNCC: 5 | RNVC: 9
Q1910145: RNCC: 5 | RNVC: 9

15 Jan 1997

3040-27-058-3808
Govde

270583808
CV71768: RNCC: 2 | RNVC: 1

18 Jan 2013

3040-12-352-3364
Control Cam

123523364
3109811: RNCC: 3 | RNVC: 2

9 Nov 2000

3040-21-800-0260
Extension Shaft

218000260
444: RNCC: 3 | RNVC: 2

26 Sep 1963

3040-37-503-8820

3040-37-525-4323
Linear Actuating Cylinder Piston

375254323
20032643: RNCC: 3 | RNVC: 2
20032643: RNCC: 5 | RNVC: 2

29 Jan 2013

3040-14-239-1106

3040-99-614-8130
Remote Control Lever

996148130
H41041: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-729-9187
Cylinder Spares Kit

997299187
QM/1525E/00: RNCC: 3 | RNVC: 2
M/1525: RNCC: 5 | RNVC: 1

25 Apr 1991

3040-14-501-2595
Straight Axle

145012595
538-214: RNCC: 3 | RNVC: 2
538.214: RNCC: 3 | RNVC: 2
F300 0T 025 3001: RNCC: 6 | RNVC: 9

29 Oct 1997

3040-99-257-5434
Shouldered Shaft

992575434
85/15/120: RNCC: 3 | RNVC: 2
32/3130/000: RNCC: 5 | RNVC: 1

25 Apr 1991

3040-33-211-4903
Linear Actuating Cylinder Assembly

332114903
2450-1200-0000: RNCC: 3 | RNVC: 2

21 Nov 2013

3040-14-438-3556
Nonvehicular Propeller Shaft

144383556
331A32-3222-22: RNCC: 3 | RNVC: 2

14 Mar 1990

3040-14-576-3300
Linear Actuating Cylinder

145763300
30-2552323-00: RNCC: 3 | RNVC: 2

12 Jun 2013

3040-21-888-2112
Straight Shaft

218882112
AC-E-77-3026: RNCC: 3 | RNVC: 2

4 Jan 1982

3040-99-924-5806
Rigid Connecting Link

999245806
EU5210B140-043: RNCC: 3 | RNVC: 2

30 Nov 1996

3040-12-342-5206
Linear Actuating Cylinder Assembly

123425206
U100-3232-000/K RECHTS: RNCC: 3 | RNVC: 2

24 Feb 1997

3040-12-320-6271
Hub Clamp

123206271
P-856428-401: RNCC: 3 | RNVC: 2
P856428-401: RNCC: 5 | RNVC: 2

1 Feb 1990

3040-99-817-0173
Rigid Connecting Link

998170173
79122: RNCC: 3 | RNVC: 2
79122-1: RNCC: 5 | RNVC: 2
LV8REBY79122: RNCC: 6 | RNVC: 9

1 Mar 1977

3040-99-734-8045
Flexible Shaft Assembly

997348045
MBEU58192: RNCC: 1 | RNVC: 2
1CD-LWGB-150-001: RNCC: 3 | RNVC: 2
B/MBEU58192: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-757-0658
Shaft Collar

997570658
SSK/M/615/00/0004/014: RNCC: 3 | RNVC: 1
001279705SHEET014: RNCC: 5 | RNVC: 1
SSK/M/615/00/0004/218: RNCC: 5 | RNVC: 1
SSK/M/615/00/00041TEM218: RNCC: 5 | RNVC: 1
SSK/M/615/00/0004SHEET014: RNCC: 5 | RNVC: 1
001279705/014: RNCC: 5 | RNVC: 1

25 Apr 1991

3040-99-873-1550
Body Hub

998731550
70-20-800: RNCC: 3 | RNVC: 2

30 Aug 2006

3040-99-310-0569
Straight Shaft

993100569
127-0167: RNCC: 3 | RNVC: 2

8 Jan 1993

3040-99-270-5455
Mechanical Drive Housing

992705455
110004-7001: RNCC: 3 | RNVC: 2
99PH01-181: RNCC: 6 | RNVC: 9

18 Aug 1999

3040-14-360-8519
Piston De Frein

143608519
387-2190-801: RNCC: 3 | RNVC: 2

19 Dec 1979

3040-14-307-7216
Rigid Connecting Link

143077216
301C0-0017REP17: RNCC: 3 | RNVC: 2
301C0-017REP17: RNCC: 5 | RNVC: 2

1 Jan 1974

3040-37-522-2346
Shouldered Shaft

375222346
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507147: RNCC: 3 | RNVC: 2
61507147: RNCC: 5 | RNVC: 2

29 Nov 2011

3040-99-610-9195
Rig Connecting Link

996109195
NO PRIMARY REF 99-610-9195: RNCC: 3 | RNVC: 2
137201E405: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-552-8806
Worm Wheel Gearshaft

995528806
80029B: RNCC: 3 | RNVC: 2
K116-116320: RNCC: 6 | RNVC: 9

25 Apr 1991

3040-15-136-5735
Asta Rigida Di Coll

151365735
204-001-018-45: RNCC: 3 | RNVC: 2

30 Jun 1999

3040-99-419-4918
Rigid Connecting Link

994194918
WG1545-0032-001: RNCC: 3 | RNVC: 2
1022Z-010: RNCC: 6 | RNVC: 9

30 Jan 2009

3040-01-691-9037
Remote Control Lever

016919037
EP-0023680: RNCC: 3 | RNVC: 2

5 Nov 2020

3040-01-685-8249
Straight Shaft

016858249
12604034: RNCC: 3 | RNVC: 2
12604034: RNCC: D | RNVC: 9

15 Jan 2020

3040-01-685-4679
Rigid Connecting Link

016854679
535558.X: RNCC: 3 | RNVC: 2

18 Dec 2019

3040-01-684-5077
Housing Adapter

016845077
43666: RNCC: 3 | RNVC: 2

5 Nov 2019

3040-01-682-2845
Spur Gearshaft

016822845
1713334: RNCC: 3 | RNVC: 2

31 Jul 2019

3040-01-679-4166
Rigid Connecting Link

016794166
12680192: RNCC: 3 | RNVC: 2
4401094: RNCC: 7 | RNVC: 2

22 Mar 2019

3040-01-678-6808
Pneumatic Control Assembly

016786808
SPAL4005263: RNCC: 3 | RNVC: 2
SPAL4005263: RNCC: 5 | RNVC: 2

20 Feb 2019

3040-01-678-6503
Rigid Connecting Link

016786503
12579571: RNCC: 1 | RNVC: 2
ML-8.00-1: RNCC: 3 | RNVC: 2

19 Feb 2019

3040-01-678-3490
Rigid Connecting Link

016783490
AL4004452: RNCC: 3 | RNVC: 2
AL4004452: RNCC: 5 | RNVC: 2

1 Feb 2019

3040-01-678-2383
Rigid Connecting Link

016782383
12579572: RNCC: 3 | RNVC: 2
12579572: RNCC: 5 | RNVC: 2
ML-18.63-1: RNCC: 5 | RNVC: 2
12579572: RNCC: 7 | RNVC: 2

28 Jan 2019

3040-01-677-0410
Mechanical Drive Housing

016770410
12601778: RNCC: 3 | RNVC: 2
12601778: RNCC: 5 | RNVC: 2

26 Nov 2018

3040-01-676-2812
Shaft Collar

016762812
SPAL4000769: RNCC: 3 | RNVC: 2

22 Oct 2018

3040-01-676-1108
Ball Joint

016761108
SPAL4009480: RNCC: 3 | RNVC: 2

12 Oct 2018

3040-01-676-1106
Ball Joint

016761106
SPAL4009482: RNCC: 3 | RNVC: 2

12 Oct 2018

3040-01-676-1040
Grease Cap

016761040
12601086: RNCC: 3 | RNVC: 2
12601086: RNCC: D | RNVC: 9

11 Oct 2018

3040-01-672-1799
Rigid Connecting Link

016721799
ML2-27.75: RNCC: 3 | RNVC: 2
19KP749: RNCC: 7 | RNVC: 2

24 Apr 2018

3040-01-672-1807
Shaft Idler

016721807
GS-5252-3: RNCC: 3 | RNVC: 2
4345598: RNCC: 7 | RNVC: 2

24 Apr 2018

3040-01-672-1798
Rigid Connecting Link

016721798
GS-5253-3: RNCC: 3 | RNVC: 2
4318780: RNCC: 7 | RNVC: 2

24 Apr 2018

3040-01-672-1484
Housing Adapter

016721484
22KP837: RNCC: 3 | RNVC: 2
29511625: RNCC: 5 | RNVC: 9

23 Apr 2018

3040-01-671-3139
Rigid Connecting Link

016713139
10062624: RNCC: 3 | RNVC: 2

22 Mar 2018

3040-01-671-3137
Rigid Connecting Link

016713137
10062484: RNCC: 3 | RNVC: 2

22 Mar 2018

3040-01-668-9013
Mechanical Drive Housing

016689013
7551634: RNCC: 3 | RNVC: 2
12601058: RNCC: 5 | RNVC: 2
12601058: RNCC: 7 | RNVC: 2

12 Dec 2017

3040-01-665-5099
Extension Shaft

016655099
3825029-3: RNCC: 3 | RNVC: 2
3825029-3: RNCC: 5 | RNVC: 9

2 Aug 2017

3040-01-660-0578
Shouldered Shaft

016600578
12604614: RNCC: 3 | RNVC: 2
12604614: RNCC: 3 | RNVC: 2

4 Jan 2017

3040-01-659-5990
Shouldered Shaft

016595990
12600752: RNCC: 3 | RNVC: 2
12600752: RNCC: 5 | RNVC: 9

6 Dec 2016

3040-01-659-4846
Shouldered Shaft

016594846
12607935: RNCC: 3 | RNVC: 2
12607935: RNCC: 3 | RNVC: 2

30 Nov 2016

3040-01-655-0743
Shouldered Shaft

016550743
29546284: RNCC: 3 | RNVC: 2

18 May 2016

3040-01-652-9931
Linear Actuating Cylinder Piston Rod

016529931
EP-0021819: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-652-8541
Breather

016528541
MVG12-1020: RNCC: 3 | RNVC: 2
22KP285: RNCC: 5 | RNVC: 1

7 Mar 2016

3040-01-652-3526
Control Cable Assembly

016523526
101648: RNCC: 3 | RNVC: 2
101648: RNCC: 5 | RNVC: 9

18 Feb 2016

3040-01-648-3253
Piston Ring

016483253
27018: RNCC: 3 | RNVC: 2

21 Sep 2015

3040-01-647-4429
Shouldered Shaft Assembly

016474429
4056994C91: RNCC: 1 | RNVC: 2
070416-040: RNCC: 3 | RNVC: 2

21 Aug 2015

3040-01-645-8868
Cylinder Support

016458868
12543034: RNCC: 3 | RNVC: 2
3432594: RNCC: 5 | RNVC: 2

2 Jul 2015

3040-01-642-3128
Shaft Collar

016423128
6436K27: RNCC: 3 | RNVC: 2
10017737: RNCC: D | RNVC: 9

20 Feb 2015

3040-01-641-2641
Mechanical Drive Housing

016412641
70351-38110-051: RNCC: 3 | RNVC: 2
70351-38110: RNCC: D | RNVC: 9

15 Jan 2015

3040-01-630-9015
Rigid Connecting Link

016309015
70400-01250-056: RNCC: 3 | RNVC: 2
2073-1: RNCC: 5 | RNVC: 9

21 Aug 2014

3040-01-630-1797
Straight Axle

016301797
A20000-99-029: RNCC: 3 | RNVC: 2
A20000-99-029: RNCC: 5 | RNVC: 2

28 Jul 2014

3040-01-628-6529
Rigid Connecting Link

016286529
70410-02525-103: RNCC: 3 | RNVC: 2
70410-02525: RNCC: D | RNVC: 9

4 Jun 2014

3040-01-624-8563
Mechanical Drive Housing

016248563
5254268: RNCC: 3 | RNVC: 2

16 Jan 2014

3040-01-618-4381
Mechanical Drive Housing

016184381
R22-1034: RNCC: 3 | RNVC: 2

24 Apr 2013

3040-01-618-4387
Straight Axle

016184387
R22-1013: RNCC: 3 | RNVC: 2

24 Apr 2013

3040-01-618-4382
Mechanical Drive Housing

016184382
R22-1033: RNCC: 3 | RNVC: 2

24 Apr 2013

3040-01-617-1038
Linear Actuating Cylinder Cap

016171038
10002735: RNCC: 3 | RNVC: 2

12 Mar 2013

3040-01-616-8998
Straight Shaft

016168998
5717147: RNCC: 3 | RNVC: 2
46106: RNCC: 5 | RNVC: 2

4 Mar 2013

3040-01-616-2744
Friction Lining Material

016162744
3J-270434: RNCC: 3 | RNVC: 2

7 Feb 2013

3040-01-616-2560
Friction Lining Material

016162560
3J-266377: RNCC: 3 | RNVC: 2

6 Feb 2013

3040-01-616-1711
Friction Lining Material

016161711
3J-266706: RNCC: 3 | RNVC: 2

4 Feb 2013

3040-01-615-2716
Friction Lining

016152716
EP-0008375: RNCC: 3 | RNVC: 2

7 Jan 2013

3040-01-608-6717
Rigid Connecting Link

016086717
105-219844-001: RNCC: 3 | RNVC: 2

6 Jul 2012

3040-01-607-8402
Nonaircraft Mechanical Actuator

016078402
G672116-4: RNCC: 3 | RNVC: 2

15 Jun 2012

3040-01-607-2476
Hub Clamp

016072476
CAU25006: RNCC: 1 | RNVC: 2
3107-A-1353: RNCC: 3 | RNVC: 2
CAU25006: RNCC: 5 | RNVC: 2

6 Jun 2012

3040-01-602-6375
Rigid Connecting Link

016026375
319-0271: RNCC: 3 | RNVC: 2

2 Feb 2012

3040-01-601-9484
Rigid Connecting Link

016019484
2015036: RNCC: 3 | RNVC: 2

26 Jan 2012

3040-01-600-5390
Linear Actuating Cylinder

016005390
MIL-001-1327: RNCC: 3 | RNVC: 2

7 Dec 2011

3040-01-600-5386
Linear Actuating Cylinder

016005386
MIL-001-1326: RNCC: 3 | RNVC: 2

7 Dec 2011

3040-01-600-5378
Linear Actuating Cylinder

016005378
MIL-001-1321: RNCC: 3 | RNVC: 2

7 Dec 2011

3040-01-600-5348
Linear Actuating Cylinder

016005348
MIL-001-1243: RNCC: 3 | RNVC: 2

7 Dec 2011

3040-01-600-5307
Linear Actuating Cylinder

016005307
MIL-001-1331: RNCC: 3 | RNVC: 2

7 Dec 2011

3040-01-600-3768
Rigid Connecting Link

016003768
2337916: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-1170
Piston Ring

016001170
29546328: RNCC: 3 | RNVC: 2

9 Nov 2011

3040-01-600-0544
Shaft Collar

016000544
10010867: RNCC: 3 | RNVC: 9

4 Nov 2011

3040-01-599-5008
Plain Shaft

015995008
953-01-50-553: RNCC: 3 | RNVC: 2
2599253C91: RNCC: 5 | RNVC: 2

29 Sep 2011

3040-01-599-3047
Linear Actuating Cylinder Piston Rod

015993047
3828745C1: RNCC: 3 | RNVC: 2

21 Sep 2011

Load More Results