What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 146 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 146of 575

3040-00-729-5852
Shaft Collar

007295852
542-6624-002: RNCC: 3 | RNVC: 2
BAP242-1: RNCC: 5 | RNVC: 9
3BAP242-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-734-6892
Shouldered Shaft

007346892
3880M533: RNCC: 3 | RNVC: 2
7346892: RNCC: 5 | RNVC: 2
314285: RNCC: 5 | RNVC: 9
3040007346892: RNCC: 5 | RNVC: 9
KC5291: RNCC: 5 | RNVC: 9
3040007346892: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-735-4549
Shouldered Shaft

007354549
805-1400051PC21: RNCC: 3 | RNVC: 2
3040PL1339040: RNCC: 6 | RNVC: 9
805-1400051: RNCC: D | RNVC: 9
CS-3040-0085: RNCC: D | RNVC: 9

1 Jan 1963

3040-00-735-4211
Shouldered Shaft

007354211
8351406: RNCC: 3 | RNVC: 2
8351406: RNCC: 3 | RNVC: 2
3040007354211: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-757-1718
Body Hub

007571718
8710736: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-737-2729
Shouldered Shaft

007372729
101-451: RNCC: 3 | RNVC: 2
101451: RNCC: 3 | RNVC: 2
976179R1: RNCC: 5 | RNVC: 2
976179R1: RNCC: 5 | RNVC: 9
914383: RNCC: 5 | RNVC: 9
3040007372729: RNCC: 5 | RNVC: 9
493N1: RNCC: 5 | RNVC: 9
13030229: RNCC: 7 | RNVC: 2

1 Jan 1963

3040-00-757-8815
Spur Gearshaft

007578815
65737-202: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-759-5501
Spur Gearshaft

007595501
4067-24: RNCC: 3 | RNVC: 2
4067-24: RNCC: 3 | RNVC: 9
4067D24: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-765-6758
Spur Gearshaft

007656758
392691: RNCC: 3 | RNVC: 2
392691: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-765-7831
Rigid Connecting Link

007657831
204-030-791-1: RNCC: 3 | RNVC: 2
204-030-791-1: RNCC: 5 | RNVC: 2
204-030-791-001: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-00-766-5403
Spur Gearshaft

007665403
35856: RNCC: 3 | RNVC: 2
35856: RNCC: 3 | RNVC: 9
35690: RNCC: 5 | RNVC: 9
35856: RNCC: 5 | RNVC: 9

15 Apr 1972

3040-00-766-6008
Control Cam

007666008
738C164P1: RNCC: 3 | RNVC: 2
738C164P1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-766-4306
Bell Crank Assembly

007664306
65-6793-7: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-767-8629
Rigid Connecting Link

007678629
3-74207-3: RNCC: 3 | RNVC: 2
3-74207-3: RNCC: 3 | RNVC: 9
3-74207-3: RNCC: 5 | RNVC: 2
3-74207-3: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-768-2083
Straight Shaft

007682083
358136: RNCC: 3 | RNVC: 2
358136: RNCC: 5 | RNVC: 2
358136: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-770-3619
Brake Disc

007703619
898176: RNCC: 3 | RNVC: 2
13F2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-769-4520
Linear Actuating Cylinder Assembly Parts Kit

007694520
T1L107B: RNCC: 3 | RNVC: 9
T1L107B: RNCC: 5 | RNVC: 2
T1L107B: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-772-9935
Counterbalance Weight

007729935
10012844: RNCC: 3 | RNVC: 2
74603: RNCC: 3 | RNVC: 2
10012844: RNCC: 5 | RNVC: 2
10012844: RNCC: 5 | RNVC: 2
SS-74603: RNCC: 5 | RNVC: 2
74603: RNCC: 5 | RNVC: 2
74603: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-773-9369
Shouldered Shaft

007739369
100192: RNCC: 3 | RNVC: 2
3040007739369: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-00-774-6735
Pawl

007746735
41772: RNCC: 3 | RNVC: 2
41772: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-774-1274
Spur Gearshaft

007741274
35860: RNCC: 3 | RNVC: 2
35860: RNCC: 3 | RNVC: 9
35860: RNCC: 5 | RNVC: 9

15 Apr 1972

3040-00-775-1448
Bell Crank

007751448
131D5003: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-774-9294
Counterbalance Weight

007749294
357191-25: RNCC: 3 | RNVC: 2
357191-25: RNCC: 5 | RNVC: 2
357191-25: RNCC: 5 | RNVC: 2
357191-25ECP#GX32-01: RNCC: 5 | RNVC: 9
357191-25: RNCC: 5 | RNVC: 9
357191-25: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-776-8068
Mechanical Drive Housing

007768068
7768068: RNCC: 3 | RNVC: 2
6762415: RNCC: 5 | RNVC: 2
6762415: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-785-2210
Control Cam

007852210
7132940-01: RNCC: 3 | RNVC: 2
7132940-1: RNCC: 5 | RNVC: 2
6-82054-2: RNCC: 5 | RNVC: 9
6-82054-2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-787-0791
Linear Actuating Cylinder Piston

007870791
130-07894: RNCC: 3 | RNVC: 2
7926388-01: RNCC: 3 | RNVC: 9
130-07894: RNCC: 5 | RNVC: 2
130-07894: RNCC: 5 | RNVC: 2
130-07894: RNCC: 5 | RNVC: 2
130-07894: RNCC: 5 | RNVC: 2
7926388-01: RNCC: 5 | RNVC: 2
130-07894: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-797-4476
Spur Gearshaft

007974476
252-30: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-798-4183
Detent Plate

007984183
14711-515: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-800-3171
Rigid Connecting Link

008003171
32-19351-5: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-802-2455
Shaft Retaining Plate

008022455
10895595: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-801-0889
Spur Gearshaft

008010889
435194: RNCC: 3 | RNVC: 2
435194: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-802-4445
Rigid Connecting Link

008024445
917132-1: RNCC: 3 | RNVC: 2
917132-1: RNCC: 3 | RNVC: 2
917132-1: RNCC: 5 | RNVC: 2
917132-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-803-2024
Rigid Connecting Link

008032024
65-26657-1: RNCC: 3 | RNVC: 2
65-26657-1: RNCC: 5 | RNVC: 9
69-10469: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-813-3336
Remote Control Lever

008133336
598518: RNCC: 3 | RNVC: 2
598518: RNCC: 3 | RNVC: 9

25 Mar 1968

3040-00-819-2997
Nonrotating Shaft Eye Bracket

008192997
201529-3: RNCC: 3 | RNVC: 2
201529-3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-827-4526
Rigid Connecting Link

008274526
65302-12544-101: RNCC: 3 | RNVC: 2
65302-12544-101: RNCC: 5 | RNVC: 2
65302-12544-101: RNCC: 5 | RNVC: 9

23 Aug 1967

3040-00-828-7368
Shaft Collar

008287368
8644318: RNCC: 3 | RNVC: 2

30 Aug 1967

3040-00-838-9614
Rigid Connecting Link

008389614
5127415: RNCC: 3 | RNVC: 2
5127416: RNCC: 5 | RNVC: 9
5127416: RNCC: C | RNVC: 1

14 Dec 1966

3040-00-463-0920
Spur Gearshaft

004630920
C5P27081: RNCC: 3 | RNVC: 2
C5P27081: RNCC: 5 | RNVC: 9

6 Jun 2008

3040-00-482-2034
Rigid Connecting Link

004822034
4F73429-101A: RNCC: 3 | RNVC: 2
4F73429-101A: RNCC: 5 | RNVC: 2
4F73429-101A: RNCC: 5 | RNVC: 9

16 Sep 1970

3040-00-482-2445
Straight Shaft

004822445
8758690: RNCC: 3 | RNVC: 2

22 Jan 1971

3040-00-627-2112
Rigid Connecting Link

006272112
15965-2: RNCC: 3 | RNVC: 9
15965-2: RNCC: 5 | RNVC: 2
15965-2: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-625-2985
Remote Control Lever

006252985
8694023: RNCC: 3 | RNVC: 2
2520006252985: RNCC: 5 | RNVC: 9

5 Mar 1975

3040-00-625-8573
Rigid Connecting Link

006258573
374533-1: RNCC: 3 | RNVC: 2
374533-1: RNCC: 5 | RNVC: 2
374533-1: RNCC: 5 | RNVC: 2
374533-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-757-8330
Straight Shaft

007578330
WA2260: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-738-4613
Rigid Connecting Link

007384613
4F55667-103A: RNCC: 3 | RNVC: 9
4F55667-103A: RNCC: 5 | RNVC: 2
4F55667-103A: RNCC: 5 | RNVC: 9

1 Mar 1968

3040-00-756-1766
Shaft Collar

007561766
L2-3: RNCC: 3 | RNVC: 2
10652536: RNCC: 3 | RNVC: 2
605-052-001: RNCC: 5 | RNVC: 2
400-513-103: RNCC: 5 | RNVC: 9
CV0702-001: RNCC: 5 | RNVC: 9
GX14790-3: RNCC: 5 | RNVC: 9
400-513-103: RNCC: 5 | RNVC: 9
605-052-001: RNCC: 5 | RNVC: 9
7200418P3: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-791-9390
Rigid Connecting Link

007919390
104209-1: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-797-0263
Rigid Connecting Link

007970263
14711-409: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-789-4950
Bell Crank

007894950
114C3324-6: RNCC: 3 | RNVC: 2
114C3324-1: RNCC: 5 | RNVC: 2
114C3324-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-449-3535
Counterbalance Weight

004493535
567-1501-03: RNCC: 3 | RNVC: 2

8 May 1970

3040-00-451-2850
Shaft Retaining Plate

004512850
8327010: RNCC: 3 | RNVC: 2

14 May 1971

3040-00-454-6062
Shouldered Shaft

004546062
1C5714P12: RNCC: 3 | RNVC: 2
1C5714P12: RNCC: 5 | RNVC: 2

14 Apr 1969

3040-00-459-6107
Worm Wheel Gearshaft

004596107
6776965: RNCC: 3 | RNVC: 2
L32399: RNCC: 5 | RNVC: 2
6776965: RNCC: 5 | RNVC: 9

29 Dec 1969

3040-00-460-5063
Counterbalance Weight

004605063
69356-301-15: RNCC: 3 | RNVC: 2

7 Jan 1970

3040-00-461-9813
Bevel Gearshaft

004619813
5007T57P02: RNCC: 3 | RNVC: 2

23 Feb 1972

3040-00-463-7760
Shouldered Shaft

004637760
694421: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-464-1224
Straight Shaft

004641224
10225487: RNCC: 3 | RNVC: 2
10225487: RNCC: 5 | RNVC: 1
433-1898: RNCC: 6 | RNVC: 9

21 May 1969

3040-00-466-7469
Remote Control Lever

004667469
LE8838A: RNCC: 3 | RNVC: 2
679671: RNCC: 5 | RNVC: 2
679671: RNCC: 5 | RNVC: 2
3040004667469: RNCC: 5 | RNVC: 9

3 Jun 1974

3040-00-469-3048
Linear Actuating Cylinder

004693048
68A733137-1003: RNCC: 3 | RNVC: 2

7 Jun 1974

3040-00-473-3208
Spool Rubber

004733208
803-2145600 PC 20: RNCC: 3 | RNVC: 2
2900-224PC1: RNCC: 5 | RNVC: 9
42553-6PCA3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-475-2471
Spur Gearshaft

004752471
1672-31: RNCC: 3 | RNVC: 9
1672C31: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-475-9932
Flexible Shaft Assembly Core

004759932
R172P030440G: RNCC: 1 | RNVC: 2
12954-440: RNCC: 3 | RNVC: 2
12954-440: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-481-8877
Linear Actuating Cylinder Piston Rod

004818877
32-61008-499: RNCC: 3 | RNVC: 2

11 Sep 1970

3040-00-482-2829
Bell Crank

004822829
MBEU1873GRU5: RNCC: 3 | RNVC: 2

18 Jan 1971

3040-00-487-3014
Piston Ring

004873014
M1904J: RNCC: 3 | RNVC: 2
34150: RNCC: 5 | RNVC: 2
21TD360: RNCC: 5 | RNVC: 2
R20042: RNCC: 5 | RNVC: 9
336593R1: RNCC: 5 | RNVC: 9
21TD360: RNCC: 5 | RNVC: 9
336593R1: RNCC: 5 | RNVC: 9
156732: RNCC: 5 | RNVC: 9

2 Jun 1969

3040-00-490-2615
Rigid Connecting Link

004902615
4C63132-101B: RNCC: 3 | RNVC: 2

19 Sep 1969

3040-00-490-7388
Shouldered Shaft

004907388
3037-1395: RNCC: 3 | RNVC: 9

24 Sep 1969

3040-00-497-6680
Bell Crank

004976680
2587952: RNCC: 1 | RNVC: 2
2587952: RNCC: 3 | RNVC: 2

21 Jun 1971

3040-00-499-0612
Rigid Connecting Link

004990612
212-060-724-33: RNCC: 3 | RNVC: 2
212-060-724-33: RNCC: 3 | RNVC: 2
212-060-724-033: RNCC: 5 | RNVC: 2

13 Oct 1969

3040-00-499-0626
Rigid Connecting Link

004990626
212-060-768-1: RNCC: 3 | RNVC: 2
212-060-768-001: RNCC: 5 | RNVC: 2
212-060-768-001: RNCC: 5 | RNVC: 2
212-060-768-1: RNCC: 5 | RNVC: 2

13 Oct 1969

3040-00-507-7140
Nonrotating Shaft Eye Bracket

005077140
13218E4050: RNCC: 3 | RNVC: 2

26 Jul 1974

3040-00-505-3558
Shouldered Shaft

005053558
RC31407: RNCC: 3 | RNVC: 2
RC31407: RNCC: 5 | RNVC: 9
RC31407: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-510-3003
Spur Gearshaft

005103003
111028: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-511-4194
Brake Disc

005114194
35621-1: RNCC: 3 | RNVC: 2
35621-1: RNCC: 5 | RNVC: 2
35621-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-517-1159
Ball Joint

005171159
A1003: RNCC: 3 | RNVC: 2
426310: RNCC: 5 | RNVC: 2
02045-0009: RNCC: 5 | RNVC: 2
426310: RNCC: 5 | RNVC: 9
A1003CP: RNCC: 5 | RNVC: 9
426310: RNCC: 5 | RNVC: 9
A108: RNCC: 5 | RNVC: 9
45-292186: RNCC: 5 | RNVC: 9
3040005171159: RNCC: 5 | RNVC: 9
3040005171159: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-516-6591
Rigid Connecting Link

005166591
68A411067-2009: RNCC: 3 | RNVC: 2

7 Aug 1974

3040-00-535-5985
Rigid Connecting Link

005355985
4448015: RNCC: 3 | RNVC: 2
60A52C75: RNCC: 3 | RNVC: 9
60A52C75: RNCC: 5 | RNVC: 2
60A52C75: RNCC: 5 | RNVC: 9
4448015: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-544-1025
Shouldered Shaft

005441025
151262: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-546-0942
Shouldered Shaft

005460942
4448341: RNCC: 3 | RNVC: 2
4448341: RNCC: 5 | RNVC: 9
3919: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-551-3741
Spur Gearshaft

005513741
397524-006: RNCC: 3 | RNVC: 2

22 Oct 1974

3040-00-560-2869
Spur Gearshaft

005602869
278673: RNCC: 3 | RNVC: 2
278673: RNCC: 5 | RNVC: 2
278673: RNCC: 5 | RNVC: 2
278673: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-560-3125
Prop Control Lever

005603125
6812633: RNCC: 3 | RNVC: 2
6812633: RNCC: 3 | RNVC: 2
6812633: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-570-3960
Remote Control Lever

005703960
10932840: RNCC: 3 | RNVC: 2
2590005703960: RNCC: 5 | RNVC: 9
10932840: RNCC: 8 | RNVC: 2

1 Jan 1961

3040-00-572-9258
Shouldered Shaft

005729258
4067-52: RNCC: 3 | RNVC: 2
4067C52: RNCC: 5 | RNVC: 9
4067-52: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-573-5204
Straight Shaft

005735204
2251726-00: RNCC: 3 | RNVC: 2

4 Dec 1974

3040-00-573-9329
Flexible Drive Shaft

005739329
4025T44P02: RNCC: 1 | RNVC: 2
15460-602: RNCC: 3 | RNVC: 2
S15460-602: RNCC: 5 | RNVC: 9
15460-602: RNCC: 5 | RNVC: 9

8 Dec 1974

3040-00-573-5981
Straight Shaft

005735981
19620-1: RNCC: 3 | RNVC: 9
19620-1: RNCC: 5 | RNVC: 2
19620-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-588-2156
Manual Control Lever

005882156
357015-2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-590-2000
Worm Wheel Gearshaft

005902000
111282-01: RNCC: 3 | RNVC: 9
111282-01: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-592-5208
Rigid Connecting Link

005925208
6-83698-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-603-6205
Rigid Connecting Link

006036205
353197: RNCC: 3 | RNVC: 2
353197: RNCC: 5 | RNVC: 2
353197: RNCC: 5 | RNVC: 2
353197: RNCC: 5 | RNVC: 9
353197: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-605-9683
Shouldered Shaft

006059683
29-5656-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-606-2849
Straight Shaft

006062849
11671050-1: RNCC: 3 | RNVC: 2

30 Jan 1975

3040-00-607-2167
Rigid Connecting Link

006072167
23-2428: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-608-8792
Shouldered Shaft

006088792
372420: RNCC: 3 | RNVC: 2
372420: RNCC: 5 | RNVC: 9
372420: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-602-8727
Shouldered Shaft

006028727
5002243: RNCC: 3 | RNVC: 2
5002243: RNCC: 5 | RNVC: 2
5002243: RNCC: 5 | RNVC: 2

22 Jan 1975

3040-00-611-0343
Rigid Connecting Link

006110343
371981-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-614-2396
Rigid Connecting Link

006142396
29-8230: RNCC: 3 | RNVC: 2
29-8230: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-628-0916
Control Cam

006280916
41A12102: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-650-2320
Rigid Connecting Link

006502320
66-9162-2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-652-9667
Rigid Connecting Link

006529667
363565-2: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-670-9294
Linear Actuating Cylinder Piston Rod

006709294
56C23343-9: RNCC: 3 | RNVC: 9
56C23343-2: RNCC: 5 | RNVC: 9
56C23343-2: RNCC: 5 | RNVC: 9
56C23343-2: RNCC: 5 | RNVC: 9
56C23343-9: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-672-8888
Multiple Gears Gearshaft

006728888
454974-2: RNCC: 3 | RNVC: 2
454974-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-672-9983
Rigid Connecting Link

006729983
39-8170-502: RNCC: 3 | RNVC: 2
39-8170-1: RNCC: 5 | RNVC: 9
39-8170-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-675-9106
Spur Gearshaft

006759106
366356: RNCC: 3 | RNVC: 2
366356: RNCC: 5 | RNVC: 2
366356: RNCC: 5 | RNVC: 2
366356: RNCC: 5 | RNVC: 9
366356: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-677-8523
Straight Shaft

006778523
103425: RNCC: 3 | RNVC: 9
103425: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-678-3131
Remote Control Lever

006783131
10862052: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-678-3128
Shouldered Shaft

006783128
10862046: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-678-7034
Spur Gearshaft

006787034
8350940: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-689-3221
Spur Gearshaft

006893221
2587622: RNCC: 3 | RNVC: 2

8 Feb 1971

3040-00-689-5160
Shaft Collar

006895160
100994: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-692-9221
Mechanical Drive Housing

006929221
6766382: RNCC: 3 | RNVC: 2
7708748: RNCC: 5 | RNVC: 2
6766382: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-700-3873
Bevel Gearshaft

007003873
S6135-66224: RNCC: 3 | RNVC: 2
S6135-66224-000: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-701-8062
Pawl

007018062
9053356: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-708-4237
Rigid Connecting Link

007084237
276980: RNCC: 3 | RNVC: 2
276980: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-709-3707
Rigid Connecting Link

007093707
2-73331-1: RNCC: 3 | RNVC: 2
SR10523A501: RNCC: 5 | RNVC: 2
2-73331-1: RNCC: 5 | RNVC: 2
2-73331-1: RNCC: 5 | RNVC: 2
2-73331-1: RNCC: 5 | RNVC: 2
SR10523A501: RNCC: 5 | RNVC: 2
2-73331-1: RNCC: 5 | RNVC: 2
2-73331-1: RNCC: 5 | RNVC: 2
2-73331-1: RNCC: 5 | RNVC: 9
2-73331-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-709-6688
Brake Band And Lining

007096688
41717: RNCC: 3 | RNVC: 2
41717: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-712-0709
Shouldered Shaft

007120709
90-3500: RNCC: 3 | RNVC: 2

1 Jan 1961

3040-00-714-5219
Straight Shaft

007145219
67A229B213-1: RNCC: 3 | RNVC: 2
67A229B213-1: RNCC: 5 | RNVC: 9
67A229B213-1: RNCC: 5 | RNVC: 9

19 Jul 1971

3040-00-715-1870
Rigid Connecting Link

007151870
2-73391-1: RNCC: 3 | RNVC: 2
2-73391-1: RNCC: 3 | RNVC: 9
2-73391-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-724-0273
Control Cam

007240273
337094: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-725-3850
Flexible Core End Fitting

007253850
8676187: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-731-8098
Rigid Connecting Link

007318098
204-001-957-1: RNCC: 3 | RNVC: 2
204-001-957-001: RNCC: 5 | RNVC: 2
204-001-957-1: RNCC: 7 | RNVC: 2

1 Jan 1961

3040-00-735-3477
Rigid Connecting Link

007353477
041718: RNCC: 3 | RNVC: 2
23529691: RNCC: 5 | RNVC: 2
041718: RNCC: 5 | RNVC: 9
5197118: RNCC: 5 | RNVC: 9
5197118: RNCC: 5 | RNVC: 9

23 Feb 1968

3040-00-735-4554
Adjusting Scre Shoe

007354554
803-1645098 PC 13: RNCC: 3 | RNVC: 2
805-1626022-14: RNCC: 5 | RNVC: 9
805-1626022PC14: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-736-3999
Rigid Connecting Link

007363999
204-001-014-7: RNCC: 3 | RNVC: 2
204-001-014-007: RNCC: 5 | RNVC: 2
204-001-014-7: RNCC: 5 | RNVC: 2
3040007363999: RNCC: 6 | RNVC: 9

1 Jan 1961

3040-00-740-9725
Shouldered Shaft

007409725
7409725: RNCC: 3 | RNVC: 2
305485: RNCC: 5 | RNVC: 2
KC1816: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-753-9218
Straight Shaft

007539218
N2: RNCC: 3 | RNVC: 2

26 Feb 1968

3040-00-757-1442
Rigid Connecting Link

007571442
69-3305: RNCC: 3 | RNVC: 2
69-3305: RNCC: 5 | RNVC: 2
69-3305: RNCC: 5 | RNVC: 2
69-3305: RNCC: 5 | RNVC: 2
69-3305: RNCC: 5 | RNVC: 2
69-3305: RNCC: 5 | RNVC: 2
69-3305: RNCC: 5 | RNVC: 2
69-3305: RNCC: 5 | RNVC: 2
69-3305: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-758-0964
Spur Gearshaft

007580964
680403: RNCC: 3 | RNVC: 2
680403: RNCC: 5 | RNVC: 2
680403: RNCC: 5 | RNVC: 9
D83-0101: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-758-8545
Flexible Shaft Assembly Core

007588545
7355828: RNCC: 3 | RNVC: 2
6680007588545: RNCC: 5 | RNVC: 9
6680PL0928341: RNCC: 6 | RNVC: 9

1 Jan 1960

3040-00-766-1754
Rigid Connecting Link

007661754
104212-5: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-761-8027
Control Cam

007618027
588966-1: RNCC: 3 | RNVC: 2
588966-1: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-00-766-5032
Rigid Connecting Link

007665032
4F55667-101A: RNCC: 3 | RNVC: 2

20 Mar 1968

3040-00-766-5517
Spur Gearshaft

007665517
35704: RNCC: 3 | RNVC: 9
35704: RNCC: 5 | RNVC: 2
35704: RNCC: 5 | RNVC: 9

15 Apr 1972

3040-00-768-3096
Shouldered Shaft

007683096
3-13444-1: RNCC: 3 | RNVC: 9
3-13444-1: RNCC: C | RNVC: 1

1 Jan 1962

3040-00-761-9722
Counterbalance Weight

007619722
18C3767-4: RNCC: 3 | RNVC: 2
P18C3767-4: RNCC: 5 | RNVC: 2
P18C3767-4: RNCC: 5 | RNVC: 9
18C3767-4: RNCC: 5 | RNVC: 9
P18C3767-4: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-780-6958
Linear Actuating Cylinder Cap

007806958
114H4311-1: RNCC: 3 | RNVC: 2
114H4311-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-780-5853
Spur Gearshaft

007805853
A02H6006-1: RNCC: 3 | RNVC: 2
A02H6006-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-781-5619
Rigid Connecting Link

007815619
5117210: RNCC: 3 | RNVC: 2
5117210: RNCC: 5 | RNVC: 9
PC5117210: RNCC: 5 | RNVC: 9
2990007815619: RNCC: 5 | RNVC: 9
K-5117210: RNCC: 5 | RNVC: 9

20 Mar 1968

3040-00-790-9708
Control Cam

007909708
69-9892-8: RNCC: 3 | RNVC: 2
69-9892-4: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-796-8365
Rotary Pump Gear

007968365
01-10954: RNCC: 3 | RNVC: 2
01-10954: RNCC: 5 | RNVC: 9
01-10954: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-797-0186
Rigid Connecting Link

007970186
14711-512-2: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-798-4166
Bell Crank

007984166
14711-408: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-797-1435
Control Cam

007971435
3037-1533: RNCC: 3 | RNVC: 9
3037-1533: RNCC: 5 | RNVC: 2

1 Jan 1960

3040-00-798-6772
Spur Gearshaft

007986772
695199: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-797-8052
Shouldered Shaft

007978052
3017251: RNCC: 3 | RNVC: 2
2032246: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-798-6234
Rotating Shaft Eye Bracket

007986234
695544: RNCC: 3 | RNVC: 2

1 Jan 1960

3040-00-799-4451
Straight Shaft

007994451
2082639-1: RNCC: 3 | RNVC: 2
2082639-1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-798-8157
Flexible Shaft Assembly Core

007988157
416B533P13: RNCC: 1 | RNVC: 2
5011M52P1: RNCC: 3 | RNVC: 2
22171-1: RNCC: 3 | RNVC: 2
10093-12: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-802-2476
Shouldered Shaft

008022476
10930991: RNCC: 3 | RNVC: 2
1025008022476: RNCC: 5 | RNVC: 9
10930991: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-802-4451
Rigid Connecting Link

008024451
907324-1: RNCC: 3 | RNVC: 2
907324-1: RNCC: 5 | RNVC: 2
907324-1: RNCC: 5 | RNVC: 2
907324-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-805-5822
Spur Gearshaft

008055822
393858: RNCC: 3 | RNVC: 2
393858: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-806-5584
Rigid Connecting Link

008065584
923069-1: RNCC: 3 | RNVC: 9
923069-1: RNCC: 5 | RNVC: 2
923069-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-806-6385
Rigid Connecting Link

008066385
826996-1: RNCC: 3 | RNVC: 2
826996-1: RNCC: 5 | RNVC: 2
826996-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-806-5503
Rigid Connecting Link

008065503
832033-1: RNCC: 3 | RNVC: 2
832033-1: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-821-2275
Straight Shaft

008212275
8710629: RNCC: 3 | RNVC: 2
3040008212275: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-816-8565
Rigid Connecting Link

008168565
389966: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-821-4734
Control Cam

008214734
GYLC1243: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-820-7370
Shouldered Shaft

008207370
KF80039-01: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-838-9615
Rigid Connecting Link

008389615
5127417: RNCC: 3 | RNVC: 2

14 Dec 1966

3040-00-837-1882
Counterbalance Weight

008371882
3005290CLD: RNCC: 3 | RNVC: 2
3005290CLD: RNCC: 5 | RNVC: 2

7 Dec 1966

3040-00-837-1884
Counterbalance Weight

008371884
3005290CLB: RNCC: 3 | RNVC: 2

7 Dec 1966

3040-00-840-9526
Nonrotating Shaft Eye Bracket

008409526
10865863: RNCC: 3 | RNVC: 2
2540008409526: RNCC: 5 | RNVC: 9
PN10865863: RNCC: 5 | RNVC: 9
10865863: RNCC: 8 | RNVC: 2

21 Dec 1966

3040-00-099-7846
Spur Gearshaft

000997846
28582: RNCC: 3 | RNVC: 2
28582: RNCC: 5 | RNVC: 9
28582: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-099-9285
Counterbalance Weight

000999285
703560CL8: RNCC: 3 | RNVC: 2

15 Dec 1972

3040-00-102-9074
Rigid Connecting Link

001029074
4F73184-101A: RNCC: 3 | RNVC: 2

3 Jun 1968

3040-00-103-3762
Shaft Retaining Plate

001033762
135B6214: RNCC: 3 | RNVC: 2

7 Jun 1968

3040-00-103-1402
Spur Gearshaft

001031402
114C2894: RNCC: 3 | RNVC: 2
3040PL0663912: RNCC: 6 | RNVC: 9

5 Jun 1968

3040-00-102-6821
Rigid Connecting Link

001026821
549AS113-1: RNCC: 3 | RNVC: 2
549AS113: RNCC: D | RNVC: 9

27 Oct 1974

3040-00-103-9511
Counterbalance Weight

001039511
114S2971-31: RNCC: 3 | RNVC: 2

14 Jun 1968

3040-00-104-0550
Spur Gearshaft

001040550
35413201030: RNCC: 3 | RNVC: 2

14 Jun 1968

3040-00-107-9341
Tran Gearshaft Assy

001079341
9601M39G07: RNCC: 3 | RNVC: 2
9601M39G09: RNCC: 3 | RNVC: 2

26 Jul 1968

3040-00-110-7079
Shouldered Shaft

001107079
882393: RNCC: 3 | RNVC: 2
882393: RNCC: 5 | RNVC: 2
882393: RNCC: 5 | RNVC: 9

9 Aug 1968

3040-00-112-9652
Counterbalance Weight

001129652
9662M68P02: RNCC: 3 | RNVC: 2

26 Aug 1968

3040-00-113-1753
Counterbalance Weight

001131753
9653M26P04: RNCC: 3 | RNVC: 2

28 Aug 1968

3040-00-113-4027
Counterbalance Weight

001134027
9653M26P02: RNCC: 3 | RNVC: 2

30 Aug 1968

3040-00-114-0235
Counterbalance Weight

001140235
9642M30P10: RNCC: 3 | RNVC: 2

9 Sep 1968

3040-00-114-8781
Rocking Shaft

001148781
21076: RNCC: 3 | RNVC: 2
M21076: RNCC: 3 | RNVC: 9

20 Dec 1972

3040-00-115-1623
Shouldered Shaft

001151623
35-79501-2010-3: RNCC: 3 | RNVC: 2
GC2250: RNCC: 5 | RNVC: 9

13 Sep 1968

3040-00-116-5924
Counterbalance Weight

001165924
9632M85P02: RNCC: 3 | RNVC: 2

30 Sep 1968

3040-00-117-7536
Straight Shaft

001177536
531501-1: RNCC: 3 | RNVC: 2

4 Oct 1968

3040-00-118-3397
Shouldered Shaft

001183397
79116: RNCC: 3 | RNVC: 2
79116: RNCC: 5 | RNVC: 2
079116: RNCC: 5 | RNVC: 2
10182017: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-123-0191
Remote Control Lever

001230191
11635960: RNCC: 3 | RNVC: 2
61928: RNCC: 5 | RNVC: 2

1 Nov 1968

3040-00-125-4865
Shaft Assembly

001254865
7041-90: RNCC: 3 | RNVC: 2
PLC7041-90: RNCC: 5 | RNVC: 9
C7041-90: RNCC: 5 | RNVC: 9

13 Nov 1968

3040-00-125-8499
Shaft Retaining Plate

001258499
16704444: RNCC: 3 | RNVC: 9
NAFB1741A: RNCC: 5 | RNVC: 9
AFB1741A: RNCC: 5 | RNVC: 9
12068277: RNCC: 5 | RNVC: 9
MAF10B603BPC18: RNCC: 5 | RNVC: 9
MAFB603BPC18: RNCC: 5 | RNVC: 9
16704444: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-127-5322
Shaft Retaining Plate

001275322
7355393: RNCC: 3 | RNVC: 2
5342PL0782736: RNCC: 6 | RNVC: 9

27 Nov 1968

3040-00-129-6142
Rigid Connecting Link

001296142
206-001-020-33: RNCC: 3 | RNVC: 2

11 Dec 1968

3040-00-133-3375
Rotating Shaft Eye Bracket

001333375
206-001-525-1: RNCC: 3 | RNVC: 2

10 Jan 1969

3040-00-133-9570
Remote Control Lever

001339570
10915657: RNCC: 3 | RNVC: 2

9 Aug 1968

3040-00-133-4692
Counterbalance Weight

001334692
703560CL7: RNCC: 3 | RNVC: 2
502283CL7: RNCC: 5 | RNVC: 9

26 Dec 1968

3040-00-137-0210
Manual Control Lever

001370210
4N12807-101A: RNCC: 3 | RNVC: 2

11 Jul 1971

3040-00-139-8351
Rigid Connecting Link

001398351
14-40483-501: RNCC: 3 | RNVC: 2
14-40483-501: RNCC: 3 | RNVC: 9
14-40483-501: RNCC: 5 | RNVC: 9

18 Aug 1971

3040-00-167-2715
Shouldered Shaft

001672715
1587485P1: RNCC: 3 | RNVC: 2

14 Feb 1973

3040-00-141-1712
Rotating Shaft Eye Bracket

001411712
8834000: RNCC: 3 | RNVC: 2
871939: RNCC: 5 | RNVC: 9
871939: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-167-7281
Shouldered Shaft

001677281
221851: RNCC: 3 | RNVC: 2

7 Feb 1973

3040-00-171-2036
Shouldered Shaft

001712036
123HM10121-512: RNCC: 3 | RNVC: 2
123HM10121-512: RNCC: 5 | RNVC: 9

21 Aug 1972

3040-00-173-7362
Rigid Connecting Link

001737362
65300-12153-101REVB: RNCC: 3 | RNVC: 2
65300-12153-101: RNCC: 5 | RNVC: 2
65300-12153-101: RNCC: 5 | RNVC: 2
65300-12153-101: RNCC: 5 | RNVC: 9
65300-12153-101: RNCC: 5 | RNVC: 9
65300-12153-101: RNCC: 5 | RNVC: 9

18 Feb 1973

3040-00-148-9179
Shouldered Shaft

001489179
533905-2: RNCC: 1 | RNVC: 2
533905-2: RNCC: 3 | RNVC: 2
533905-2: RNCC: 5 | RNVC: 2

28 Sep 2010

3040-00-148-6552
Governor Shaft

001486552
20224: RNCC: 3 | RNVC: 2

12 Mar 1974

3040-00-174-3720
Shouldered Shaft

001743720
65850-05131-101: RNCC: 3 | RNVC: 2
65850-05131-101: RNCC: 5 | RNVC: 2
65850-05131-101: RNCC: 5 | RNVC: 2

14 Feb 1973

3040-00-179-7106
Straight Shaft

001797106
10895438: RNCC: 3 | RNVC: 2

15 Nov 1968

3040-00-184-3661
Linear Actuating Cylinder

001843661
92941-5: RNCC: 3 | RNVC: 2

8 Sep 1972

3040-00-193-0000
Brake Disc

001930000
H060157-005: RNCC: 3 | RNVC: 2
60157-3: RNCC: 3 | RNVC: 9
H60157-2: RNCC: 5 | RNVC: 9

6 Mar 1970

3040-00-163-3042
Rigid Connecting Link

001633042
14-41629-1: RNCC: 3 | RNVC: 9
14-41629-1: RNCC: C | RNVC: 1

3 Nov 1971

3040-00-164-4342
Control Cam

001644342
151050: RNCC: 3 | RNVC: 2

9 Feb 1973

3040-00-216-8620
Rigid Connecting Link

002168620
4500-229: RNCC: 3 | RNVC: 2
68B618000-229: RNCC: 5 | RNVC: 2
68J618000-229: RNCC: 5 | RNVC: 9
4034-3: RNCC: 5 | RNVC: 9

6 May 1973

3040-00-221-9590
Shouldered Shaft

002219590
127834: RNCC: 3 | RNVC: 2

11 May 1973

3040-00-225-0553
Spur Gearshaft

002250553
6841225: RNCC: 3 | RNVC: 2
6841225: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-217-5211
Rigid Connecting Link

002175211
5-69558: RNCC: 3 | RNVC: 2
5-63150-1: RNCC: 5 | RNVC: 9
5-63150: RNCC: 5 | RNVC: 9
9-47465: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-224-9019
Shouldered Shaft

002249019
511224-1: RNCC: 3 | RNVC: 2
511224-1: RNCC: 5 | RNVC: 2
511224-1: RNCC: 5 | RNVC: 2
511224-1: RNCC: 5 | RNVC: 2
511224-1: RNCC: 5 | RNVC: 9

18 Mar 1970

3040-00-237-6079
Shouldered Shaft

002376079
955136-1: RNCC: 3 | RNVC: 2
955136: RNCC: D | RNVC: 9

6 Nov 1970

3040-00-240-6955
Remote Control Lever

002406955
4F52616-102A: RNCC: 3 | RNVC: 2
4F52616-102A: RNCC: 5 | RNVC: 2
4E52616-102A: RNCC: 5 | RNVC: 9
4F52616-102A: RNCC: 5 | RNVC: 9

3 Nov 1969

3040-00-252-3351
Shouldered Shaft

002523351
68620: RNCC: 3 | RNVC: 2
68620: RNCC: 5 | RNVC: 1

17 Jun 1970

3040-00-250-5178
Spur Gearshaft

002505178
101D4450: RNCC: 3 | RNVC: 2

12 Nov 1969

3040-00-249-7086
Shouldered Shaft

002497086
C5A27530: RNCC: 3 | RNVC: 9

19 Feb 1969

3040-00-244-3438
Bevel Gearshaft

002443438
532289-1: RNCC: 3 | RNVC: 2
532289-1: RNCC: 3 | RNVC: 9
532289-1: RNCC: 5 | RNVC: 9

12 Feb 1969

3040-00-272-7822
Shouldered Shaft

002727822
117D2053: RNCC: 3 | RNVC: 2

30 Jul 1973

3040-00-272-2958
Multiple Gears Gearshaft

002722958
544011-1: RNCC: 3 | RNVC: 2
544011-1: RNCC: 5 | RNVC: 2

22 Jul 1973

3040-00-272-5630
Bell Crank

002725630
68A620027-1003: RNCC: 3 | RNVC: 2

30 Jul 1973

3040-00-317-3199
Face Gearshaft

003173199
365083-1: RNCC: 3 | RNVC: 2
365083-1: RNCC: 5 | RNVC: 9
365083-1: RNCC: 5 | RNVC: 9

11 Nov 1973

3040-00-314-2451
Straight Shaft

003142451
1617191-1: RNCC: 3 | RNVC: 2

7 Nov 1973

3040-00-327-0740
Shouldered Shaft

003270740
9-62543: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-328-7125
Shouldered Shaft

003287125
90-3318: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-331-2105
Linear Actuating Cylinder Assembly Parts Kit

003312105
CB322HL001: RNCC: 3 | RNVC: 2
CB322HL002: RNCC: 5 | RNVC: 9

6 Dec 1973

3040-00-332-2686
Control Cam

003322686
6-74664: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-314-5729
Counterbalance Weight

003145729
300319: RNCC: 3 | RNVC: 2
300319: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-333-6638
Bell Crank

003336638
5-67388-14: RNCC: 3 | RNVC: 2
5-67388-6: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-333-6639
Rigid Connecting Link

003336639
5-68013-3: RNCC: 3 | RNVC: 2
5-68013-3: RNCC: 5 | RNVC: 2
5-68013-3: RNCC: 5 | RNVC: 2
5-68013-3: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-334-5916
Control Cam

003345916
6-83801: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-343-7776
Counterbalance Weight

003437776
4027005CL5: RNCC: 3 | RNVC: 2
4027005CL5: RNCC: 5 | RNVC: 9

15 Jan 1974

3040-00-345-8030
Bell Crank

003458030
10920722: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-345-8029
Bell Crank

003458029
10920749: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-349-9200
Shouldered Shaft

003499200
11636094: RNCC: 3 | RNVC: 2
11636094: RNCC: 5 | RNVC: 9
1025003499200: RNCC: 6 | RNVC: 9

24 Mar 1971

3040-00-358-5694
Remote Control Lever

003585694
VB151: RNCC: 3 | RNVC: 2
3-10VB151-199: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-361-2800
Rigid Connecting Link

003612800
4031258: RNCC: 3 | RNVC: 2
4031258: RNCC: 5 | RNVC: 2

18 Feb 1974

3040-00-366-3484
Rigid Connecting Link

003663484
8028207: RNCC: 3 | RNVC: 2
8028207: RNCC: 3 | RNVC: 9
8028207: RNCC: 5 | RNVC: 9
8075241PC8028207: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-367-7317
Bell Crank

003677317
5123880: RNCC: 3 | RNVC: 2
5123880: RNCC: 5 | RNVC: 9
5172504: RNCC: 5 | RNVC: 9
5172504: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-370-1060
Remote Control Lever

003701060
150044: RNCC: 3 | RNVC: 2
7902037-21: RNCC: 5 | RNVC: 2
006-502-778: RNCC: 5 | RNVC: 2
150044: RNCC: 5 | RNVC: 2
150044: RNCC: 5 | RNVC: 9
006-502-778: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-373-1602
Rigid Connecting Link

003731602
2645375: RNCC: 3 | RNVC: 2

12 Mar 1974

3040-00-373-1634
Rigid Connecting Link

003731634
2649994: RNCC: 3 | RNVC: 2

12 Mar 1974

3040-00-373-1635
Spur Gearshaft

003731635
2650450: RNCC: 3 | RNVC: 2

12 Mar 1974

3040-00-377-1740
Rigid Connecting Link

003771740
2649217: RNCC: 3 | RNVC: 2

12 Mar 1974

3040-00-366-6248
Shouldered Shaft

003666248
PF101: RNCC: 3 | RNVC: 2
7768148: RNCC: 5 | RNVC: 2
69469C1: RNCC: 5 | RNVC: 2
3-0PF101-121: RNCC: 5 | RNVC: 2
1DPF101: RNCC: 5 | RNVC: 2
56336: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-396-5096
Counterbalance Weight

003965096
211146CL5: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-401-8355
Push-Pull Control Assembly

004018355
8366: RNCC: 3 | RNVC: 9
P-3217A: RNCC: 5 | RNVC: 9
M1182: RNCC: 5 | RNVC: 9
8366: RNCC: 5 | RNVC: 9

30 Mar 1970

3040-00-401-8348
Push-Pull Control Assembly

004018348
CCX63320: RNCC: 3 | RNVC: 2
32377-003-0240: RNCC: 3 | RNVC: 9
3009-075-0610: RNCC: 5 | RNVC: 2
33C20: RNCC: 5 | RNVC: 9
33C20: RNCC: 5 | RNVC: 9
32377-003-0240: RNCC: 5 | RNVC: 9

30 Mar 1970

3040-00-403-1310
Straight Shaft

004031310
2560351-2: RNCC: 3 | RNVC: 2
620941-2560351-2: RNCC: 5 | RNVC: 9
2560351-2: RNCC: 5 | RNVC: 9
2560351-2: RNCC: 5 | RNVC: 9
7000M2124-2: RNCC: 5 | RNVC: 9
2560351-2: RNCC: 5 | RNVC: 9
2560351-2: RNCC: 5 | RNVC: 9
2560351-2: RNCC: 5 | RNVC: 9
7000M2124-2: RNCC: 5 | RNVC: 9

5 Jun 1970

3040-00-404-1720
Rigid Connecting Link

004041720
212-001-063-001: RNCC: 3 | RNVC: 2
212-001-063-1: RNCC: 5 | RNVC: 2

30 Jul 1969

3040-00-404-1721
Rigid Connecting Link

004041721
212-001-063-3: RNCC: 3 | RNVC: 2

30 Jul 1969

3040-00-404-1759
Rigid Connecting Link

004041759
4N12639-101A: RNCC: 3 | RNVC: 2

30 Jul 1969

3040-00-405-1983
Remote Control Lever

004051983
10917796: RNCC: 3 | RNVC: 2

31 Mar 1971

3040-00-405-6489
Counterbalance Weight

004056489
579-1006-10: RNCC: 3 | RNVC: 2
579-1006: RNCC: D | RNVC: 9

5 Apr 1971

3040-00-410-1135
Spur Gearshaft

004101135
11642122: RNCC: 3 | RNVC: 2
3040004101135: RNCC: 5 | RNVC: 9
3040004101135: RNCC: 6 | RNVC: 9

1 May 1974

3040-00-410-1234
Straight Shaft

004101234
11684023: RNCC: 3 | RNVC: 2
2910004101234: RNCC: 5 | RNVC: 9
2910004101234: RNCC: 6 | RNVC: 9

1 May 1974

3040-00-411-7183
Worm Wheel Gearshaft

004117183
215579-1: RNCC: 3 | RNVC: 2
215579-1: RNCC: 3 | RNVC: 9
215579: RNCC: D | RNVC: 9

22 Aug 1969

3040-00-412-3670
Shaft Retaining Plate

004123670
156334: RNCC: 3 | RNVC: 2

25 Jan 1972

3040-00-435-9456
Spur Gearshaft

004359456
366626-1: RNCC: 3 | RNVC: 2

20 May 1974

3040-00-414-6535
Straight Shaft

004146535
10900083: RNCC: 3 | RNVC: 2

13 Nov 1970

3040-00-416-7004
Rigid Connecting Link

004167004
3224744: RNCC: 3 | RNVC: 2
3224744: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-419-9431
Straight Shaft

004199431
8735030: RNCC: 3 | RNVC: 2

18 Dec 1970

3040-00-421-3928
Body Hub

004213928
7979324: RNCC: 3 | RNVC: 2
3040004213928: RNCC: 5 | RNVC: 9
3040-00-421-3928: RNCC: 6 | RNVC: 9

9 Dec 1970

3040-00-428-2221
Rigid Connecting Link

004282221
VB269S2: RNCC: 3 | RNVC: 2
3-19VB134A263: RNCC: 5 | RNVC: 2
VB134A: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-431-9111
Shouldered Shaft

004319111
4168716: RNCC: 3 | RNVC: 2
4168716: RNCC: 5 | RNVC: 2
4168716: RNCC: 5 | RNVC: 2
4168716: RNCC: 5 | RNVC: 9

28 Apr 1971

3040-00-166-5909
Straight Shaft

001665909
110867: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-147-3128
Rigid Connecting Link

001473128
123LM10191-1: RNCC: 3 | RNVC: 2
123LM10191-1: RNCC: 5 | RNVC: 2
123LM10191-1: RNCC: 5 | RNVC: 9
123LM10191: RNCC: D | RNVC: 9

17 Sep 1971

3040-00-146-9834
Bell Crank

001469834
65700-70025-132: RNCC: 3 | RNVC: 2

15 Sep 1971

3040-00-177-7863
Manual Control Lever

001777863
10918303: RNCC: 3 | RNVC: 2

30 Dec 1968

3040-00-157-3328
Shouldered Shaft

001573328
65850-05179-101: RNCC: 3 | RNVC: 2
65850-05179-101: RNCC: 5 | RNVC: 9

19 Jan 1973

3040-00-295-9258
Rigid Connecting Link

002959258
4500-235: RNCC: 3 | RNVC: 2
4034-5: RNCC: 5 | RNVC: 9

28 Sep 1973

3040-00-304-6298
Rigid Connecting Link

003046298
94375: RNCC: 3 | RNVC: 2
94375: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-306-3613
Shaft Collar

003063613
341984: RNCC: 3 | RNVC: 2
341984: RNCC: 5 | RNVC: 2
341984: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-308-6506
Spur Gearshaft

003086506
776132-1: RNCC: 3 | RNVC: 2
776132-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-308-3028
Spur Gearshaft

003083028
474857-003: RNCC: 3 | RNVC: 2

21 Oct 1973

3040-00-304-7255
Control Cam

003047255
422142-1: RNCC: 3 | RNVC: 2

17 Oct 1973

3040-00-332-6009
Flexible Control Casing

003326009
4F55437-115B: RNCC: 3 | RNVC: 2

16 Dec 1973

3040-00-433-4817
Rigid Connecting Link

004334817
4F54407-101A: RNCC: 3 | RNVC: 9
4F54407-101A: RNCC: 5 | RNVC: 2
4F54407-101A: RNCC: 5 | RNVC: 9

30 Jul 1970

3040-00-435-9114
Flexible Drive Shaft

004359114
416B870P44: RNCC: 1 | RNVC: 2
FAUSG11QX5: RNCC: 3 | RNVC: 2
8948X0A80-08: RNCC: 5 | RNVC: 9
0312-18378X08008: RNCC: 5 | RNVC: 9
8948X0A80-08: RNCC: 5 | RNVC: 9

21 Mar 1969

3040-00-437-5022
Rigid Connecting Link

004375022
3130-0038: RNCC: 3 | RNVC: 9
3130-0038: RNCC: 5 | RNVC: 9
3130-0038: RNCC: C | RNVC: 1

29 Aug 1969

3040-00-436-0315
Bell Crank

004360315
65-11846-4: RNCC: 3 | RNVC: 2

21 Mar 1969

3040-00-443-6541
Crew Push Rod Assy

004436541
4F73183-105A: RNCC: 3 | RNVC: 2

4 Apr 1969

3040-00-446-8598
Bell Crank

004468598
65-39045-4: RNCC: 3 | RNVC: 2
65-12048-6: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-136-2345
Skid Shoe

001362345
206-050-128: RNCC: 1 | RNVC: 2
206-050-128-1: RNCC: 3 | RNVC: 2
206-050-128-1: RNCC: 5 | RNVC: 2
206-050-128-1: RNCC: 5 | RNVC: 2
206-050-128: RNCC: D | RNVC: 9

15 Jan 1969

3040-00-147-3758
Spur Gearshaft

001473758
656788-2: RNCC: 3 | RNVC: 2

26 Sep 1971

3040-00-148-1155
Special Shaft

001481155
MBEU2121GRU5: RNCC: 3 | RNVC: 2
MBEU2121GRU5: RNCC: 5 | RNVC: 2

24 Sep 1971

3040-00-149-8007
Remote Control Lever

001498007
123LM10193-11: RNCC: 3 | RNVC: 2
123LM10193-11: RNCC: 5 | RNVC: 2
123LM10193-11: RNCC: 5 | RNVC: 9

29 Sep 1971

3040-00-153-9788
Straight Shaft

001539788
64-7-207-13: RNCC: 3 | RNVC: 2
64-7-207-13: RNCC: 5 | RNVC: 2

3 Nov 1971

3040-00-155-7744
Shouldered Shaft

001557744
EW35144: RNCC: 3 | RNVC: 2
EW35144: RNCC: 5 | RNVC: 9

17 Jan 1973

3040-00-179-8625
Counterbalance Weight

001798625
137105-16: RNCC: 3 | RNVC: 2

4 Nov 1968

3040-00-163-5857
Tow Hook Winch Shaft

001635857
65850-05166-101: RNCC: 3 | RNVC: 2

28 Jan 1973

3040-00-163-5971
Shaft Retaining Plate

001635971
65850-05142-101: RNCC: 3 | RNVC: 2

2 Feb 1973

3040-00-328-1551
Rigid Connecting Link

003281551
90-2377-11: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-276-0069
Spur Gearshaft

002760069
10866265: RNCC: 3 | RNVC: 2
3040002760069: RNCC: 5 | RNVC: 9
3040002760069: RNCC: 6 | RNVC: 9

8 Aug 1973

3040-00-295-0739
Rigid Connecting Link

002950739
4500-223-G: RNCC: 3 | RNVC: 2
4500-223: RNCC: 3 | RNVC: 9
4028-5: RNCC: 5 | RNVC: 9

22 Sep 1973

3040-00-329-1032
Shaft Collar

003291032
31169-1550: RNCC: 3 | RNVC: 2
31169-1550: RNCC: 3 | RNVC: 9

3 Dec 1973

3040-00-302-6397
Hub Clamp

003026397
YC25-3-303PH: RNCC: 3 | RNVC: 2
918360-6D: RNCC: 7 | RNVC: 2

14 Oct 1973

3040-00-334-9794
Spur Gearshaft

003349794
4013079: RNCC: 3 | RNVC: 2
4013079: RNCC: 5 | RNVC: 2

24 Dec 1973

3040-00-409-8942
Nonrotating Shaft Eye Bracket

004098942
8758698: RNCC: 3 | RNVC: 2

13 Nov 1970

3040-00-404-7982
Bevel Gearshaft

004047982
65357-07020-102: RNCC: 3 | RNVC: 2
65357-07020-102: RNCC: 5 | RNVC: 2

6 Aug 1969

3040-00-442-1461
Gyro Magnetic Brake

004421461
43834: RNCC: 3 | RNVC: 2
43834: RNCC: 5 | RNVC: 9

5 Dec 1969

3040-00-431-2637
Counterbalance Weight

004312637
579-1006-02: RNCC: 3 | RNVC: 2

4 May 1970

3040-00-433-0769
Linear Actuating Cylinder Assembly Parts Kit

004330769
PK402HLL05: RNCC: 3 | RNVC: 2

27 Jul 1970

3040-00-435-0845
Bevel-Spur Gearshaft

004350845
C5A27151: RNCC: 3 | RNVC: 2
C5A27151: RNCC: 3 | RNVC: 9

14 Mar 1969

3040-00-101-8902
Worm Wheel Gearshaft

001018902
531889-1: RNCC: 3 | RNVC: 2

27 May 1968

3040-00-102-7757
Shouldered Shaft

001027757
4F63640-101A: RNCC: 3 | RNVC: 2

31 May 1968

3040-00-103-4817
Straight Shaft

001034817
420213-2: RNCC: 3 | RNVC: 2
420213-1: RNCC: 5 | RNVC: 2

1 Jun 1972

3040-00-101-2197
Flexible Casing End Fitting

001012197
5125153: RNCC: 3 | RNVC: 2
3290416: RNCC: 5 | RNVC: 9
PC5125153: RNCC: 5 | RNVC: 9

27 May 1968

3040-00-105-3252
Shouldered Shaft

001053252
230056: RNCC: 3 | RNVC: 2

1 Jul 1968

3040-00-110-3686
Shaft Collar

001103686
5886: RNCC: 3 | RNVC: 2
A5886: RNCC: 5 | RNVC: 9
5886: RNCC: C | RNVC: 1

9 Aug 1968

3040-00-111-2729
Shaft Retaining Plate

001112729
11604788: RNCC: 3 | RNVC: 2
11604788: RNCC: 5 | RNVC: 9
1025-111-2729: RNCC: 6 | RNVC: 9

16 Aug 1968

3040-00-112-2692
Spur Gearshaft

001122692
362849-2: RNCC: 3 | RNVC: 2
362849-2: RNCC: 5 | RNVC: 2
362849-2: RNCC: 5 | RNVC: 2
362849-2: RNCC: 5 | RNVC: 9
362849-1: RNCC: 5 | RNVC: 9
362849-2: RNCC: 5 | RNVC: 9
362849-1: RNCC: 5 | RNVC: 9

23 Aug 1968

3040-00-114-2298
Brake Drum

001142298
52W1729-1: RNCC: 3 | RNVC: 2
AD-2331420-1: RNCC: 5 | RNVC: 2
3040PL1651966: RNCC: 6 | RNVC: 9

23 Sep 1968

3040-00-114-2319
Rigid Connecting Link

001142319
4P31027-101A: RNCC: 3 | RNVC: 2
4P31027-101A: RNCC: 5 | RNVC: 2

11 Sep 1968

3040-00-116-4249
Shouldered Shaft

001164249
3590-040: RNCC: 3 | RNVC: 2

27 Sep 1968

3040-00-117-4877
Spur Gearshaft

001174877
532074-1: RNCC: 3 | RNVC: 2
532074-1: RNCC: 5 | RNVC: 2

4 Oct 1968

3040-00-118-5554
Mechanical Drive Housing

001185554
7954475: RNCC: 3 | RNVC: 2

11 Oct 1968

3040-00-126-6227
Multiple Gears Gearshaft

001266227
885C428G1: RNCC: 3 | RNVC: 9

20 Nov 1968

3040-00-127-3093
Bell Crank

001273093
206-001-526-001: RNCC: 3 | RNVC: 2
206-001-526-1: RNCC: 3 | RNVC: 9

25 Nov 1968

3040-00-128-7738
Spur Gearshaft

001287738
102619: RNCC: 3 | RNVC: 2

2 Dec 1968

3040-00-128-7412
Handle Shaft

001287412
90-035-3-48: RNCC: 3 | RNVC: 2
AR341-48TYPE2: RNCC: 5 | RNVC: 2
90-035-3-48: RNCC: 5 | RNVC: 2

2 Dec 1968

3040-00-132-1665
Shouldered Shaft

001321665
532365-1: RNCC: 3 | RNVC: 2
532365-1: RNCC: 5 | RNVC: 9
532365-1: RNCC: 5 | RNVC: 9

13 Dec 1968

3040-00-132-4081
Rotating Shaft Eye Bracket

001324081
4G53759-101A: RNCC: 3 | RNVC: 2

16 Dec 1968

3040-00-133-4406
Brake Disc

001334406
7088-37: RNCC: 3 | RNVC: 2
7088-37: RNCC: 5 | RNVC: 2
7088-37: RNCC: 5 | RNVC: 2
C7088-37: RNCC: 5 | RNVC: 9

26 Dec 1968

3040-00-134-7793
Remote Control Lever

001347793
10915941: RNCC: 3 | RNVC: 2
2530001347793: RNCC: 6 | RNVC: 9

2 Jun 1969

3040-00-141-0394
Counterbalance Weight

001410394
579-1028-04: RNCC: 3 | RNVC: 2

29 Aug 1971

3040-00-145-8298
Counterbalance Weight

001458298
579-1030-06: RNCC: 3 | RNVC: 2

4 Sep 1971

3040-00-136-2360
Spur Gearshaft

001362360
531933-1: RNCC: 3 | RNVC: 2

15 Jan 1969

3040-00-136-0100
Brake Disc

001360100
531775-6: RNCC: 3 | RNVC: 2
531775-6: RNCC: 5 | RNVC: 9
531775-6: RNCC: 5 | RNVC: 9

10 Jan 1969

3040-00-168-7198
Shouldered Shaft

001687198
C5P28340: RNCC: 3 | RNVC: 2
C5P28340: RNCC: 5 | RNVC: 2
C5P28340: RNCC: 5 | RNVC: 9

19 Nov 1971

3040-00-173-7363
Flexible Shaft Assembly

001737363
S16603-601: RNCC: 3 | RNVC: 2
8407-100: RNCC: 5 | RNVC: 2
16603-601: RNCC: 5 | RNVC: 9
B-409-8407-100: RNCC: 5 | RNVC: 9
117D2834: RNCC: 7 | RNVC: 2

18 Feb 1973

3040-00-179-5492
Remote Control Lever

001795492
10895548: RNCC: 3 | RNVC: 2

20 Nov 1968

3040-00-158-2162
Body Hub

001582162
2584510: RNCC: 3 | RNVC: 2

21 May 1971

3040-00-187-7827
Straight Shaft

001877827
RD34148: RNCC: 3 | RNVC: 2

16 Mar 1973

3040-00-191-2968
Shouldered Shaft

001912968
2528056: RNCC: 3 | RNVC: 2
2528056: RNCC: 5 | RNVC: 2
2528056: RNCC: 5 | RNVC: 9

1 Mar 1971

3040-00-192-5043
Counterbalance Weight

001925043
B334001538: RNCC: 3 | RNVC: 2

4 Mar 1970

3040-00-225-1443
Shouldered Shaft

002251443
2584502: RNCC: 3 | RNVC: 2

18 Mar 1970

3040-00-229-4040
Spur Gearshaft

002294040
325497: RNCC: 3 | RNVC: 2

10 Feb 1969

3040-00-230-1471
Hub Assembly *

002301471
67A230C147: RNCC: 3 | RNVC: 2
11011-01: RNCC: 5 | RNVC: 2
98-87: RNCC: 5 | RNVC: 9
67A230C147: RNCC: 5 | RNVC: 9
92-87: RNCC: 5 | RNVC: 9
67A230C147: RNCC: 5 | RNVC: 9
67A230C22: RNCC: 5 | RNVC: 9
000993-961: RNCC: 7 | RNVC: 2

3 Mar 1971

3040-00-235-7185
Rigid Connecting Link

002357185
4F21413-101A: RNCC: 3 | RNVC: 9
4F21413-101A: RNCC: 5 | RNVC: 2
4F21413-101A: RNCC: 7 | RNVC: 2

24 Oct 1969

3040-00-241-7586
Worm Wheel Gearshaft

002417586
501-4171-6: RNCC: 3 | RNVC: 2

27 Jun 1969

3040-00-250-5177
Spur Gearshaft

002505177
905D461: RNCC: 3 | RNVC: 2

12 Nov 1969

3040-00-252-7658
Rigid Connecting Link

002527658
A287930: RNCC: 3 | RNVC: 9
A287930: RNCC: 5 | RNVC: 2
99-6039332: RNCC: 6 | RNVC: 9
A287930: RNCC: C | RNVC: 1

19 Jun 1970

3040-00-264-8664
Push-Pull Control Assembly

002648664
271-631-51: RNCC: 3 | RNVC: 2
271-631-51: RNCC: 3 | RNVC: 2
70-4096-01: RNCC: 7 | RNVC: 2

22 Jul 1973

3040-00-267-9417
Shouldered Shaft

002679417
4F53633-103A: RNCC: 3 | RNVC: 2

3 Jun 2004

3040-00-270-8049
Rigid Connecting Link

002708049
4500-281: RNCC: 3 | RNVC: 2
4030-9: RNCC: 5 | RNVC: 9
68B618000-281: RNCC: 7 | RNVC: 2

28 Jul 1973

3040-00-276-9078
Rigid Connecting Link

002769078
123BM10213-612: RNCC: 3 | RNVC: 2
123BM10213-612: RNCC: 5 | RNVC: 2
123BM10213-612: RNCC: 5 | RNVC: 9
123BM10213-2: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-279-0561
Shouldered Shaft

002790561
139C6440: RNCC: 3 | RNVC: 2

8 Aug 1973

3040-00-283-4957
Reduction Positive Drive Shaft

002834957
071-000218: RNCC: 3 | RNVC: 2
071-000218: RNCC: 5 | RNVC: 9

26 Aug 1973

3040-00-329-1370
Counterbalance Weight

003291370
4003840CL3: RNCC: 3 | RNVC: 2
4003840CL3: RNCC: 3 | RNVC: 2

9 Dec 1973

3040-00-331-5235
Rigid Connecting Link

003315235
68B418000-255: RNCC: 3 | RNVC: 2
4063-3: RNCC: 5 | RNVC: 9
4072-1: RNCC: 5 | RNVC: 9
4501-255: RNCC: 7 | RNVC: 2

16 Dec 1973

3040-00-301-7910
Shouldered Shaft

003017910
9-24887-1: RNCC: 3 | RNVC: 2
9-24887-1: RNCC: 5 | RNVC: 2
9-24887-1: RNCC: 5 | RNVC: 2
9-24887-1: RNCC: 5 | RNVC: 2
9-24887-1: RNCC: 5 | RNVC: 2
9-24887-1: RNCC: 5 | RNVC: 2
9-24887-1: RNCC: 5 | RNVC: 2
9-24887-1: RNCC: 5 | RNVC: 2
9-24887-1: RNCC: 5 | RNVC: 2
9-24887-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-303-5395
Control Cam

003035395
544059: RNCC: 3 | RNVC: 2

14 Oct 1973

3040-00-333-5439
Friction Lining

003335439
604001: RNCC: 3 | RNVC: 2
250A-1 FACING: RNCC: 5 | RNVC: 2
159585: RNCC: 5 | RNVC: 9

14 Dec 1973

3040-00-333-6791
Counterbalance Weight

003336791
4022992CL2: RNCC: 3 | RNVC: 2
4022992CL2: RNCC: 5 | RNVC: 9

19 Dec 1973

3040-00-306-3525
Rigid Connecting Link

003063525
338992: RNCC: 3 | RNVC: 2
33892-1: RNCC: 5 | RNVC: 2
3040PL1215910: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-306-3757
Rigid Connecting Link

003063757
346176-4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-307-9781
Rigid Connecting Link

003079781
337571: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-342-8281
Bell Crank

003428281
60-3321-1: RNCC: 3 | RNVC: 2
60-3321-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-345-8026
Remote Control Lever

003458026
10920719: RNCC: 3 | RNVC: 2
25903458026: RNCC: 5 | RNVC: 9
25903458026: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-343-9356
Counterbalance Weight

003439356
584944CL2: RNCC: 3 | RNVC: 2

15 Jan 1974

3040-00-370-1469
Manual Control Lever

003701469
84078: RNCC: 3 | RNVC: 2
152409: RNCC: 5 | RNVC: 2
7902037-26: RNCC: 5 | RNVC: 2
84078: RNCC: 5 | RNVC: 2
84078: RNCC: 5 | RNVC: 9
84078: RNCC: 5 | RNVC: 9
152409: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-370-1488
Nonrotating Shaft Eye Bracket

003701488
152508: RNCC: 3 | RNVC: 2
152508: RNCC: 5 | RNVC: 9
152508: RNCC: 5 | RNVC: 9
152508: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-368-8254
Spur Gearshaft

003688254
474857-004: RNCC: 3 | RNVC: 2
474857: RNCC: D | RNVC: 9

3 Mar 1974

3040-00-370-1831
Nonrotating Shaft Eye Bracket

003701831
152420: RNCC: 3 | RNVC: 2
152420: RNCC: 5 | RNVC: 9
152420: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-371-2294
Straight Shaft

003712294
2649812: RNCC: 3 | RNVC: 2

8 Mar 1974

3040-00-373-1633
Rigid Connecting Link

003731633
2648847: RNCC: 3 | RNVC: 2

12 Mar 1974

3040-00-373-6367
Worm Shaft

003736367
2649714: RNCC: 3 | RNVC: 2
B-14034A: RNCC: 5 | RNVC: 9
B-14034-A: RNCC: 5 | RNVC: 9

12 Mar 1974

3040-00-399-4139
Shaft Collar

003994139
31-3606-1: RNCC: 3 | RNVC: 2
463619PC1-2-3-4: RNCC: 5 | RNVC: 2
463619PC1-2-3-4: RNCC: 5 | RNVC: 2
31-3606-1: RNCC: 5 | RNVC: 2
G14505PC1T04: RNCC: 5 | RNVC: 2
463619PC1T04: RNCC: 5 | RNVC: 2
463619PC1T04: RNCC: 5 | RNVC: 2
31-3606-1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-397-6138
Rigid Connecting Link

003976138
4042217: RNCC: 3 | RNVC: 2
4042217: RNCC: 3 | RNVC: 2
4042217: RNCC: 3 | RNVC: 2
4042217: RNCC: 3 | RNVC: 2
4042217: RNCC: 5 | RNVC: 2
4042217: RNCC: 5 | RNVC: 2
4042217: RNCC: 5 | RNVC: 2
4042217: RNCC: 5 | RNVC: 9
4042217: RNCC: 5 | RNVC: 9

8 May 1997

3040-00-400-3742
Straight Shaft

004003742
65B1613: RNCC: 3 | RNVC: 9

28 Feb 1969

3040-00-399-5613
Shouldered Shaft

003995613
16200028: RNCC: 3 | RNVC: 2
16200028: RNCC: 3 | RNVC: 9
N6776AFBAC: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-400-7045
Nonrotating Shaft Eye Bracket

004007045
10866841: RNCC: 3 | RNVC: 2

5 Mar 1969

3040-00-401-4119
Spur Gearshaft

004014119
8626495: RNCC: 3 | RNVC: 2
8626495: RNCC: 5 | RNVC: 9

21 Nov 1969

3040-00-402-8326
Linear Actuating Cylinder Assembly Parts Kit

004028326
PK202HLL05: RNCC: 3 | RNVC: 2

1 Jun 1970

3040-00-402-8324
Linear Actuating Cylinder Assembly Parts Kit

004028324
PK502HLL05: RNCC: 3 | RNVC: 2
DK502HLL05: RNCC: C | RNVC: 1

1 Jun 1970

3040-00-402-2543
Shouldered Shaft

004022543
3018158: RNCC: 3 | RNVC: 2
3018158: RNCC: 5 | RNVC: 2

3 Apr 1970

3040-00-402-6363
Ball Joint

004026363
4014246-1: RNCC: 3 | RNVC: 9
111-B-0100: RNCC: 5 | RNVC: 2
41549-1: RNCC: 5 | RNVC: 9
41549-1: RNCC: 5 | RNVC: 9
4014246-1: RNCC: C | RNVC: 1

8 Apr 1970

3040-00-411-6813
Spur Gearshaft

004116813
200413183-01: RNCC: 3 | RNVC: 2
69813: RNCC: 5 | RNVC: 9

22 Aug 1969

3040-00-419-9432
Rigid Connecting Link

004199432
8758694: RNCC: 3 | RNVC: 2

7 Dec 1970

3040-00-427-8237
Mechanical Drive Housing

004278237
4990531: RNCC: 3 | RNVC: 2

8 May 1974

3040-00-442-4440
Spur Gearshaft

004424440
531581-1: RNCC: 3 | RNVC: 2

26 Mar 1969

3040-00-424-8781
Shouldered Shaft

004248781
526-1042-01: RNCC: 3 | RNVC: 2

9 Apr 1971

3040-00-443-1777
Shouldered Shaft

004431777
02-15308: RNCC: 3 | RNVC: 2

11 Apr 1969

3040-00-446-2208
Rigid Connecting Link

004462208
114HS490-1: RNCC: 1 | RNVC: 2
SDR4-28A1-501: RNCC: 3 | RNVC: 2
BACB10C201: RNCC: 3 | RNVC: 2
114HS490-1: RNCC: 3 | RNVC: 2
MR4BS: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-446-2859
Rigid Connecting Link

004462859
114C1014-22: RNCC: 3 | RNVC: 2

19 Jan 1968

3040-00-448-3227
Push-Pull Control Assembly

004483227
13216E6108-3: RNCC: 3 | RNVC: 2
130-032-233: RNCC: 5 | RNVC: 2
13216E6108: RNCC: 5 | RNVC: 2
130-032-233: RNCC: 5 | RNVC: 9

4 Jan 1971

3040-00-102-4290
Straight Shaft

001024290
240075: RNCC: 3 | RNVC: 9

3 Dec 1972

3040-00-139-1031
Anti-Rotation Shoe

001391031
216139: RNCC: 3 | RNVC: 2

9 Aug 1971

3040-00-137-7056
Shouldered Shaft

001377056
29-34508-1: RNCC: 3 | RNVC: 2

19 Jul 1971

3040-00-147-3131
Spur Gearshaft

001473131
10633: RNCC: 3 | RNVC: 2

17 Sep 1971

3040-00-171-3141
Pawl

001713141
292AS420: RNCC: 3 | RNVC: 2
3579007-1: RNCC: 5 | RNVC: 2

16 Feb 1973

3040-00-177-7866
Manual Control Lever

001777866
10865866: RNCC: 3 | RNVC: 2
3040001777866: RNCC: 6 | RNVC: 9
10865866: RNCC: 8 | RNVC: 2

30 Dec 1968

3040-00-179-0408
Mechanical Drive Housing

001790408
882580-4: RNCC: 3 | RNVC: 2
882580-4: RNCC: 5 | RNVC: 9

19 May 1969

3040-00-314-3569
Inertia Damper

003143569
E5177763: RNCC: 3 | RNVC: 2
5177763: RNCC: 5 | RNVC: 9
5177763: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-284-2215
Spur Gearshaft

002842215
974016-1: RNCC: 3 | RNVC: 2
974016-1: RNCC: 5 | RNVC: 9

31 Aug 1973

3040-00-296-7216
Rotating Shaft Eye Bracket

002967216
K-5130509: RNCC: 3 | RNVC: 2
5130509: RNCC: 3 | RNVC: 2
5120687: RNCC: 5 | RNVC: 9
5161677: RNCC: 5 | RNVC: 9
PC5130509: RNCC: 5 | RNVC: 9
3040002967216: RNCC: 5 | RNVC: 9
K-5130509: RNCC: 5 | RNVC: 9
3040002967216: RNCC: 6 | RNVC: 9

22 Sep 1973

3040-00-298-7382
Hub Clamp

002987382
626-014-001: RNCC: 3 | RNVC: 2

3 Oct 1973

3040-00-301-9944
Spur Gearshaft

003019944
189F133: RNCC: 3 | RNVC: 2

12 Oct 1973

3040-00-333-6761
Remote Control Lever

003336761
6-83693: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-340-9429
Main Gear Coupling

003409429
6-84501-1: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-343-7377
Thrust Bearing Shoe

003437377
463994PC2T04: RNCC: 3 | RNVC: 2
463965PC2T04: RNCC: 5 | RNVC: 2
F3201007PC2T04: RNCC: 5 | RNVC: 2
4 3-8 3965-2: RNCC: 5 | RNVC: 2
464017PC2T04: RNCC: 5 | RNVC: 2
4 3-8-3965-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-370-0416
Rigid Connecting Link

003700416
150244: RNCC: 3 | RNVC: 2
150244: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-370-3121
Ball Joint

003703121
A35242: RNCC: 3 | RNVC: 2
55184: RNCC: 5 | RNVC: 2
A35242: RNCC: 5 | RNVC: 9

8 Mar 1974

3040-00-354-7325
Rigid Connecting Link

003547325
4004912: RNCC: 3 | RNVC: 9
4004912: RNCC: 5 | RNVC: 9

6 Feb 1974

3040-00-355-7904
Body Hub

003557904
23032-1901: RNCC: 3 | RNVC: 2
23032-1901: RNCC: 5 | RNVC: 9

8 Feb 1974

3040-00-443-1077
Rigid Connecting Link

004431077
114S1733-8: RNCC: 3 | RNVC: 2

3 Apr 1969

3040-00-419-4172
Shouldered Shaft

004194172
9240-003-83: RNCC: 3 | RNVC: 2
26800185: RNCC: 5 | RNVC: 9

28 Jan 1972

3040-00-446-7754
Counterbalance Weight

004467754
137453-15: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-106-9691
Bell Crank

001069691
5018T05G04: RNCC: 3 | RNVC: 2
5018T05G04: RNCC: 5 | RNVC: 2
5018T05G04: RNCC: 5 | RNVC: 9
5018T05G04: RNCC: 5 | RNVC: 9
5018T05G04: RNCC: C | RNVC: 1

21 Aug 1972

3040-00-109-8561
Counterbalance Weight

001098561
9642M30P07: RNCC: 3 | RNVC: 2

2 Aug 1968

3040-00-110-5388
Shaft Collar

001105388
58315220030: RNCC: 3 | RNVC: 2

9 Aug 1968

3040-00-110-5974
Counterbalance Weight

001105974
9642M30P08: RNCC: 3 | RNVC: 2

9 Aug 1968

3040-00-113-1755
Counterbalance Weight

001131755
9653M26P06: RNCC: 3 | RNVC: 2

28 Aug 1968

3040-00-113-4790
Straight Shaft

001134790
135B5928: RNCC: 3 | RNVC: 2
10177039: RNCC: 6 | RNVC: 9
3040PL0959264: RNCC: 6 | RNVC: 9

30 Aug 1968

3040-00-116-6349
Helical Gearshaft

001166349
531274-1: RNCC: 3 | RNVC: 2

30 Sep 1968

3040-00-121-4418
Manual Control Lever

001214418
3037-1315: RNCC: 3 | RNVC: 2

23 Oct 1968

3040-00-123-3978
Helical-Spur Gearshaft

001233978
531383-1: RNCC: 3 | RNVC: 2

1 Nov 1968

3040-00-126-0175
Linear Actuating Cylinder Assembly

001260175
A15A80TE2: RNCC: 3 | RNVC: 2
A15080TE2: RNCC: C | RNVC: 1
EE35834: RNCC: C | RNVC: 1

27 Dec 1972

3040-00-126-2227
Shouldered Shaft

001262227
16600571: RNCC: 3 | RNVC: 2
16600571: RNCC: 3 | RNVC: 9
AFB6717C: RNCC: 5 | RNVC: 9
C6717AFBFC: RNCC: 5 | RNVC: 9
16701386: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-128-7602
Rigid Connecting Link

001287602
206-062-705-1: RNCC: 3 | RNVC: 2

2 Dec 1968

3040-00-131-6214
Control Cam

001316214
750643-4: RNCC: 3 | RNVC: 2
750643-1: RNCC: E | RNVC: 8

21 Mar 1975

3040-00-130-5991
Spur Gearshaft

001305991
531935-1: RNCC: 3 | RNVC: 2

6 Dec 1968

3040-00-132-4728
Straight Shaft

001324728
041767: RNCC: 3 | RNVC: 2
041767: RNCC: 5 | RNVC: 9
37709-66: RNCC: 5 | RNVC: 9
37709-66: RNCC: C | RNVC: 1

18 Dec 1968

3040-00-133-3374
Rotating Shaft Eye Bracket

001333374
206-001-529-1: RNCC: 3 | RNVC: 2

10 Jan 1969

3040-00-133-4691
Counterbalance Weight

001334691
703560CL6: RNCC: 3 | RNVC: 2
703560CL6: RNCC: 5 | RNVC: 2
703560CL6: RNCC: 5 | RNVC: 2
703560CL6: RNCC: 5 | RNVC: 2
502283CL6: RNCC: 5 | RNVC: 9

26 Dec 1968

3040-00-134-3100
Truck Lift Shaft

001343100
K215000391: RNCC: 3 | RNVC: 2

21 Oct 1968

3040-00-135-5674
Rigid Connecting Link

001355674
4G12033-101A: RNCC: 3 | RNVC: 2

6 Jan 1969

3040-00-135-7062
Rigid Connecting Link

001357062
A02R2855-3: RNCC: 3 | RNVC: 2

8 Jan 1969

3040-00-137-3843
Shouldered Shaft

001373843
69-4562: RNCC: 3 | RNVC: 2

24 Jul 1971

3040-00-137-6415
Actuator Shaft

001376415
740873-2: RNCC: 3 | RNVC: 2

19 Jul 1971

3040-00-165-1684
Rigid Connecting Link

001651684
52D34: RNCC: 3 | RNVC: 2
52D34: RNCC: 5 | RNVC: 2
52D34: RNCC: 5 | RNVC: 9

19 Nov 1971

3040-00-164-3445
Manual Control Lever

001643445
246578: RNCC: 3 | RNVC: 2
009-00002-12: RNCC: 3 | RNVC: 2
13RU1282: RNCC: 5 | RNVC: 2
309024R1: RNCC: 5 | RNVC: 9
240832: RNCC: 5 | RNVC: 9
30924R1: RNCC: 5 | RNVC: 9
301-SH-639: RNCC: 5 | RNVC: 9

9 Feb 1973

3040-00-169-5021
Hub Clamp

001695021
C103: RNCC: 3 | RNVC: 2
C98: RNCC: 5 | RNVC: 2
CG3-28: RNCC: 5 | RNVC: 9
135395-000-001: RNCC: C | RNVC: 1
13084644: RNCC: C | RNVC: 1

25 Aug 1972

3040-00-146-6132
Manual Control Lever

001466132
0110-9000: RNCC: 3 | RNVC: 2
88-X-36: RNCC: 3 | RNVC: 2
01109000: RNCC: 5 | RNVC: 2
0F9-01109000: RNCC: 5 | RNVC: 2
0R5-6100C26184: RNCC: 5 | RNVC: 2
6100C26-1841: RNCC: 5 | RNVC: 9
6100C26-1841: RNCC: 5 | RNVC: 9
L1097: RNCC: 5 | RNVC: 9
0R5-6100C26184: RNCC: 5 | RNVC: 9
0F9-01109000: RNCC: 5 | RNVC: 9

12 Sep 1971

3040-00-149-8284
Rigid Connecting Link

001498284
MBEU1317GRU5: RNCC: 3 | RNVC: 2

10 Oct 1971

3040-00-150-6073
Flexible Control Casing

001506073
64T58: RNCC: 3 | RNVC: 9
64T58: RNCC: 5 | RNVC: 9
64T00: RNCC: 5 | RNVC: 9

14 Sep 1970

3040-00-179-7115
Bell Crank

001797115
10920669: RNCC: 3 | RNVC: 2

15 Nov 1968

3040-00-181-3225
Rigid Connecting Link

001813225
4E33206-101B: RNCC: 3 | RNVC: 2

13 Nov 1970

3040-00-184-8276
Rigid Connecting Link

001848276
32-65058-5: RNCC: 3 | RNVC: 2

22 Feb 1971

3040-00-191-0975
Pawl

001910975
11659172: RNCC: 3 | RNVC: 2
2530001910975: RNCC: 6 | RNVC: 9

1 Mar 1971

3040-00-199-5069
Straight Shaft

001995069
323914: RNCC: 3 | RNVC: 2

24 Jan 1969

3040-00-204-0398
Friction Lining

002040398
99133782: RNCC: 3 | RNVC: 2
33782: RNCC: 5 | RNVC: 9
4330PL0727168: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-214-3760
Shaft Retaining Plate

002143760
5177026: RNCC: 3 | RNVC: 2
LA997-3: RNCC: 5 | RNVC: 9
5177026: RNCC: 5 | RNVC: 9
PC5177026: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-230-0284
Remote Control Lever

002300284
11659175: RNCC: 3 | RNVC: 2
2530002300284: RNCC: 5 | RNVC: 9
2530002300284: RNCC: 6 | RNVC: 9

3 Mar 1971

3040-00-234-3079
Hydraulic Gland Assembly

002343079
RG2AHL0133: RNCC: 3 | RNVC: 2
L026380000: RNCC: 5 | RNVC: 9
RG2AHL013X: RNCC: 5 | RNVC: 9
L2638: RNCC: 5 | RNVC: 9
RG2AHL013X: RNCC: C | RNVC: 1

26 Oct 1970

3040-00-233-1148
Shouldered Shaft

002331148
201224: RNCC: 3 | RNVC: 2

2 Nov 1970

3040-00-234-6977
Rigid Connecting Link

002346977
292AS423: RNCC: 3 | RNVC: 2
65A112D78-1: RNCC: 5 | RNVC: 2
3828505-501: RNCC: 5 | RNVC: 2

28 May 1973

3040-00-235-7141
Rigid Connecting Link

002357141
4F24529-101A: RNCC: 3 | RNVC: 2

24 Oct 1969

3040-00-237-6221
Shaft Collar

002376221
1874E187: RNCC: 3 | RNVC: 9
NW15188: RNCC: 5 | RNVC: 2
15188: RNCC: 5 | RNVC: 9
1874E187: RNCC: C | RNVC: 1

28 Oct 1970

3040-00-239-7238
Remote Control Lever

002397238
616971-1: RNCC: 3 | RNVC: 2
616971-1: RNCC: 5 | RNVC: 2
616971-1: RNCC: 5 | RNVC: 2
616971-1: RNCC: 5 | RNVC: 2
616971-1: RNCC: 5 | RNVC: 2
616971-1: RNCC: 5 | RNVC: 2
616971-1: RNCC: 5 | RNVC: 2
616971-1: RNCC: 5 | RNVC: 9

5 Jan 1972

3040-00-239-8609
Counterbalance Weight

002398609
579-1005-14: RNCC: 3 | RNVC: 2
10106739: RNCC: 6 | RNVC: 9

24 Dec 1971

3040-00-239-9236
Rigid Connecting Link

002399236
4C63127-103D: RNCC: 3 | RNVC: 2

31 Oct 1969

3040-00-242-8021
Elevator Horn Shaft-Bearing

002428021
370343-3: RNCC: 3 | RNVC: 2

3 Jun 1973

3040-00-243-4431
Shouldered Shaft

002434431
1128AMM40411-11: RNCC: 3 | RNVC: 2
1128AMM40411-11: RNCC: 5 | RNVC: 9
1128AMM40411: RNCC: D | RNVC: 9

4 Nov 1970

3040-00-243-4460
Shouldered Shaft

002434460
1128ABM40030-11: RNCC: 3 | RNVC: 2
1128ABM40030-11: RNCC: 5 | RNVC: 9
1128ABM40030: RNCC: D | RNVC: 9

4 Nov 1970

3040-00-252-8421
Mechanical Drive Housing

002528421
209-011-720-1: RNCC: 3 | RNVC: 2
209-011-720-001: RNCC: 5 | RNVC: 2
209-011-720-1: RNCC: 5 | RNVC: 2

14 Jul 1969

3040-00-256-6744
Body Hub

002566744
SS-522-4491153PC77-1.5IN: RNCC: 3 | RNVC: 2
SS-522-4491153PC77-1.5IN: RNCC: 5 | RNVC: 2
SS-522-4491153PC77-1.5IN: RNCC: 5 | RNVC: 2
4491153-L-77-1.: RNCC: C | RNVC: 1
4491153PC77: RNCC: C | RNVC: 1
4491153-L-77: RNCC: C | RNVC: 1
SS-522-4491153: RNCC: D | RNVC: 9

17 Mar 1971

3040-00-256-7817
Body Hub

002567817
215862: RNCC: 3 | RNVC: 2

17 Mar 1971

3040-00-270-8050
Rigid Connecting Link

002708050
4500-209: RNCC: 3 | RNVC: 2
4029-1: RNCC: 5 | RNVC: 2
68B618000-209: RNCC: 7 | RNVC: 2

28 Jul 1973

3040-00-319-4166
Shouldered Shaft

003194166
108787: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-327-0688
Bevel Gearshaft

003270688
6-73187: RNCC: 3 | RNVC: 2
6-73187: RNCC: 5 | RNVC: 9
6-73187: RNCC: 5 | RNVC: 9

3 Feb 1967

3040-00-329-1235
Control Cam

003291235
0113550-03: RNCC: 3 | RNVC: 2

9 Dec 1973

3040-00-332-5929
Flexible Control Casing

003325929
4F55437-141B: RNCC: 3 | RNVC: 2

16 Dec 1973

3040-00-332-6053
Flexible Control Casing

003326053
4F55437-104C: RNCC: 3 | RNVC: 2

16 Dec 1973

3040-00-307-1720
Rotating Shaft Eye Bracket

003071720
338071: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-335-0283
Flexible Control Casing

003350283
4F55437-105B: RNCC: 3 | RNVC: 2

24 Dec 1973

3040-00-335-6347
Shouldered Shaft

003356347
74339: RNCC: 3 | RNVC: 2
74339: RNCC: 5 | RNVC: 9
74339: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-335-9331
Shouldered Shaft

003359331
12214: RNCC: 3 | RNVC: 2
4048636: RNCC: 3 | RNVC: 2
368016R1: RNCC: 5 | RNVC: 9
368016R1: RNCC: 5 | RNVC: 9
4048636: RNCC: 5 | RNVC: 9
12214: RNCC: 5 | RNVC: 9
664-1: RNCC: 5 | RNVC: 9
4048636: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-337-4203
Counterbalance Weight

003374203
4014692CL1: RNCC: 3 | RNVC: 2
4014692CL1: RNCC: 3 | RNVC: 9
4014692CL1: RNCC: 5 | RNVC: 9

28 Dec 1973

3040-00-337-4317
Counterbalance Weight

003374317
4022993CL3: RNCC: 3 | RNVC: 2
4022993CL3: RNCC: 5 | RNVC: 2

28 Dec 1973

3040-00-337-4214
Counterbalance Weight

003374214
4014692CL4: RNCC: 3 | RNVC: 2
4014692CL4: RNCC: 5 | RNVC: 2
4014692CL4: RNCC: 5 | RNVC: 9
4014692CL4: RNCC: 5 | RNVC: 9

28 Dec 1973

3040-00-340-4273
Remote Control Lever

003404273
60-2058: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-340-4311
Rigid Connecting Link

003404311
90-1544-4: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-347-9174
Rigid Connecting Link

003479174
68A411004-1003: RNCC: 3 | RNVC: 2

24 Jan 1974

3040-00-364-8277
Bell Crank

003648277
030407: RNCC: 3 | RNVC: 2
030407: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-367-9591
Shouldered Shaft

003679591
2652821: RNCC: 3 | RNVC: 2

27 Feb 1974

3040-00-351-5489
Counterbalance Weight

003515489
69356-301-13: RNCC: 3 | RNVC: 2

25 Mar 1970

3040-00-354-1150
Bell Crank

003541150
3290624: RNCC: 3 | RNVC: 2
3290624: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-373-1638
Rigid Connecting Link

003731638
2654199: RNCC: 3 | RNVC: 2

12 Mar 1974

3040-00-374-5732
Ball Joint

003745732
120456: RNCC: 3 | RNVC: 2
DS-107: RNCC: 5 | RNVC: 2
DS107: RNCC: 5 | RNVC: 9
A222298: RNCC: 5 | RNVC: 9
A222298: RNCC: 5 | RNVC: 9
120456: RNCC: 5 | RNVC: 9
1602966: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-388-2962
Shouldered Shaft

003882962
16102287: RNCC: 3 | RNVC: 9
CAFB5654A: RNCC: 5 | RNVC: 9
NAFB5654A: RNCC: 5 | RNVC: 9
NAFB5654A: RNCC: C | RNVC: 1
CAFB5654A: RNCC: C | RNVC: 1
16102287: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-393-8521
Canopy Drive Shaft

003938521
68A351004-2011: RNCC: 3 | RNVC: 2
68A351004-2009: RNCC: 5 | RNVC: 2
68A351004-2007: RNCC: 5 | RNVC: 2

5 Apr 1974

3040-00-398-0278
Autosyn Indic Shaft

003980278
1492046-0002: RNCC: 3 | RNVC: 2
1492046-0002: RNCC: 5 | RNVC: 2
B779134-1: RNCC: 5 | RNVC: 9
B779134-1: RNCC: 5 | RNVC: 9
1492046-2: RNCC: 5 | RNVC: 9
779134-1: RNCC: 5 | RNVC: 9
1492046-2: RNCC: 5 | RNVC: 9
1492046-0002: RNCC: 5 | RNVC: 9
779134-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-400-0416
Shouldered Shaft

004000416
C5A27519: RNCC: 3 | RNVC: 2
C5A27519: RNCC: 3 | RNVC: 9

26 Feb 1969

3040-00-400-8314
Spur Gearshaft

004008314
101D4395: RNCC: 3 | RNVC: 2

14 Nov 1969

3040-00-402-6083
Shouldered Shaft

004026083
C5A28109: RNCC: 3 | RNVC: 9

8 Apr 1970

3040-00-404-1710
Rigid Connecting Link

004041710
212-001-053-1: RNCC: 3 | RNVC: 2
212-001-053-1: RNCC: 5 | RNVC: 2
212-001-053: RNCC: D | RNVC: 9

30 Jul 1969

3040-00-404-6440
Rigid Connecting Link

004046440
53B22097-1: RNCC: 3 | RNVC: 9
53B22097-1: RNCC: C | RNVC: 1

8 Aug 1969

3040-00-404-7364
Worm Shaft

004047364
8626318: RNCC: 3 | RNVC: 2

13 Aug 1969

3040-00-404-1719
Rigid Connecting Link

004041719
212-001-062-3: RNCC: 3 | RNVC: 2

30 Jul 1969

3040-00-405-0179
Rigid Connecting Link

004050179
212-030-170-007: RNCC: 3 | RNVC: 2
212-030-170-7: RNCC: 5 | RNVC: 2

29 Mar 1971

3040-00-408-9424
Shaft Collar

004089424
0359-5: RNCC: 3 | RNVC: 2
1889768PC19: RNCC: C | RNVC: 1
1675053-5: RNCC: C | RNVC: 1
1820640: RNCC: C | RNVC: 1
0359-5: RNCC: C | RNVC: 1
0359-5: RNCC: C | RNVC: 1
PL 1983059 ITEM.58: RNCC: C | RNVC: 1
0359: RNCC: D | RNVC: 9

13 Jul 1970

3040-00-405-6193
Collar Assembly

004056193
2039607-1: RNCC: 3 | RNVC: 2
2039607-1: RNCC: 5 | RNVC: 9

2 Jul 2008

3040-00-409-4021
Rigid Connecting Link

004094021
7409012: RNCC: 3 | RNVC: 2

17 Jul 1970

3040-00-434-1230
Shouldered Shaft

004341230
68A731032-2001: RNCC: 3 | RNVC: 2

17 May 1974

3040-00-411-6199
Rigid Connecting Link

004116199
14-40462-9: RNCC: 3 | RNVC: 2
14-40462-9: RNCC: 3 | RNVC: 9
14-40462-9: RNCC: 5 | RNVC: 2
14-40462-9: RNCC: 5 | RNVC: 2
14-40462-9: RNCC: 5 | RNVC: 9
14-40462-9: RNCC: 5 | RNVC: 9

22 Jan 1972

3040-00-444-5657
Rigid Connecting Link

004445657
32-50166-5: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-419-5708
Control Cam

004195708
4G14385-101A: RNCC: 3 | RNVC: 2
4G14375: RNCC: D | RNVC: 9

28 Jan 1972

3040-00-424-4044
Shouldered Shaft

004244044
5154639: RNCC: 3 | RNVC: 2
5154639: RNCC: 5 | RNVC: 9
K-5154639: RNCC: 5 | RNVC: 9

1 Jan 1961

Load More Results