What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 139 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 139of 575

3040-01-119-0733
Bevel Gearshaft

011190733
132D1959: RNCC: 3 | RNVC: 2
10106789: RNCC: 6 | RNVC: 9

16 Sep 1981

3040-01-119-0603
Shouldered Shaft

011190603
3168810-1: RNCC: 3 | RNVC: 2
3168810-1: RNCC: 5 | RNVC: 9
10130533: RNCC: 6 | RNVC: 9
3168810: RNCC: D | RNVC: 9

16 Sep 1981

3040-01-119-0730
Control Cam

011190730
409B126: RNCC: 3 | RNVC: 2
409B126: RNCC: 5 | RNVC: 9
409B126: RNCC: 5 | RNVC: 9
10130542: RNCC: 6 | RNVC: 9

16 Sep 1981

3040-01-119-5567
Rigid Connecting Link

011195567
7054M25G01: RNCC: 3 | RNVC: 2

25 Sep 1981

3040-01-120-5402
Linear Actuating Cylinder Assembly

011205402
RD2510: RNCC: 3 | RNVC: 2
164-7066805-142: RNCC: C | RNVC: 1
H547-2003-142: RNCC: C | RNVC: 1

21 Oct 1981

3040-01-121-1550
Shaft Retaining Plate

011211550
13211E3028: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-7372
Brake Disc

011217372
3030463: RNCC: 3 | RNVC: 2

7 Nov 1981

3040-01-122-2945
Flange Drive Shaft Adapter

011222945
13226E0153: RNCC: 3 | RNVC: 2
30-42-01: RNCC: 5 | RNVC: 2

19 Nov 1981

3040-01-121-6084
Shaft

011216084
5138959: RNCC: 3 | RNVC: 2
3040PL0945181: RNCC: 6 | RNVC: 9

6 Nov 1981

3040-01-122-3364
Straight Shaft

011223364
MG0-3005-204: RNCC: 3 | RNVC: 2
MG0-3005-204: RNCC: 5 | RNVC: 9
MG0-3-N PIECE 4: RNCC: 5 | RNVC: 9

19 Nov 1981

3040-01-122-7907
Counterbalance Weight

011227907
2663071: RNCC: 3 | RNVC: 2
10158402: RNCC: 6 | RNVC: 9

28 Nov 1981

3040-01-123-0306
Pneumatic Actuator Cylinder Housing

011230306
28756: RNCC: 3 | RNVC: 2
13-28335 ITEM 1: RNCC: 5 | RNVC: 2
13-28335: RNCC: D | RNVC: 9

4 Dec 1981

3040-01-123-2698
Straight Shaft

011232698
525C854H01: RNCC: 3 | RNVC: 2

10 Dec 1981

3040-01-122-9935
Linear Actuating Cylinder Head

011229935
28760: RNCC: 3 | RNVC: 2
13-28335 ITEM 5: RNCC: 5 | RNVC: 2
13-28335: RNCC: D | RNVC: 9

3 Dec 1981

3040-01-124-6810
Rigid Connecting Link

011246810
7-0570-2: RNCC: 3 | RNVC: 2
7-0570-1: RNCC: 5 | RNVC: 9
10153948: RNCC: 6 | RNVC: 9

10 Jan 1982

3040-01-125-7328
Spur Gearshaft

011257328
65395-07005-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8469
Remote Control Lever

011258469
1534AS215: RNCC: 3 | RNVC: 2
1534AS215: RNCC: 5 | RNVC: 2
1534AS215: RNCC: 5 | RNVC: 9
1534AS215: RNCC: 5 | RNVC: 9
1534AS215: RNCC: 5 | RNVC: 9
D013457-1: RNCC: 5 | RNVC: 9
1534AS215: RNCC: 5 | RNVC: 9
D013457-1: RNCC: C | RNVC: 1

1 Feb 1982

3040-01-125-8918
Bell Crank

011258918
74A615606-1005: RNCC: 3 | RNVC: 2
74A615606-1003: RNCC: 5 | RNVC: 2
74A615606-1003: RNCC: 5 | RNVC: 9
74A615606-1001: RNCC: 5 | RNVC: 9
10130529: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-126-0231
Straight Shaft

011260231
87832-1609 ITEM 7: RNCC: 3 | RNVC: 2
709-4684880 ITEM 7: RNCC: 5 | RNVC: 2
87832-1609: RNCC: D | RNVC: 9
709-4684880: RNCC: D | RNVC: 9

5 Feb 1982

3040-01-126-4037
Magnigication Shaft

011264037
12293554: RNCC: 3 | RNVC: 2
12293554: RNCC: 5 | RNVC: 9
12293330: RNCC: 5 | RNVC: 9
12293318: RNCC: 5 | RNVC: 9

11 Feb 1982

3040-01-127-1445
Straight Shaft

011271445
31049-1: RNCC: 3 | RNVC: 2

24 Feb 1982

3040-01-127-1466
Helical Gearshaft

011271466
1H-C18FS-19-13833-1REF14: RNCC: 3 | RNVC: 9
A1-378X0VH: RNCC: 5 | RNVC: 9
200136T PIECE 327-12: RNCC: 5 | RNVC: 9
228303BV12: RNCC: 5 | RNVC: 9
228303BV12: RNCC: C | RNVC: 1
PL200136T: RNCC: D | RNVC: 9

24 Feb 1982

3040-01-127-7813
Hub Clamp

011277813
11590891: RNCC: 3 | RNVC: 2

7 Mar 1982

3040-01-128-5874
Spur Gearshaft

011285874
2771554-101: RNCC: 3 | RNVC: 2
2771554-101: RNCC: 5 | RNVC: 9
10106849: RNCC: 6 | RNVC: 9
2771554: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-128-5901
Rigid Connecting Link

011285901
74A460607-1003: RNCC: 3 | RNVC: 2
10106853: RNCC: 6 | RNVC: 9
74A460607: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-129-3558
Straight Shaft

011293558
65311-03015-101: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-061-0608
Shouldered Shaft

010610608
87553-5007 REVA PC10: RNCC: 3 | RNVC: 2
704-4674165 PC 10: RNCC: 5 | RNVC: 2
704-4674165 ITEM 10: RNCC: 5 | RNVC: 9
704-4674165 ITE: RNCC: C | RNVC: 1
704-4674165: RNCC: D | RNVC: 9

10 Jun 1978

3040-01-063-2437
Extension Shaft

010632437
384-1101-00: RNCC: 3 | RNVC: 2

31 Jul 1978

3040-01-063-9307
Counterbalance Weight

010639307
579-1024-01: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-063-9308
Counterbalance Weight

010639308
579-1024-02: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-063-9312
Counterbalance Weight

010639312
579-1024-06: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-064-0375
Shaft Collar

010640375
31059-3: RNCC: 3 | RNVC: 2

16 Aug 1978

3040-01-066-3262
Straight Shaft

010663262
504811-1: RNCC: 3 | RNVC: 2

6 Oct 1978

3040-01-065-6141
Mechanical Drive Housing

010656141
12274546: RNCC: 3 | RNVC: 2
XM68315: RNCC: 5 | RNVC: 2
3040010656141: RNCC: 6 | RNVC: 9

21 Sep 1978

3040-01-067-3855
Brake Drum

010673855
507221: RNCC: 3 | RNVC: 2
507221: RNCC: 5 | RNVC: 9
507221: RNCC: 5 | RNVC: 9

29 Oct 1978

3040-01-068-9690
Plate

010689690
1M1440: RNCC: 3 | RNVC: 2

7 Dec 1978

3040-01-072-4387
Gear Shaft

010724387
42305D211: RNCC: 3 | RNVC: 2
42305-211: RNCC: 3 | RNVC: 9
42305D211: RNCC: 5 | RNVC: 9

1 Mar 1979

3040-01-073-8003
Shouldered Shaft

010738003
12271513: RNCC: 3 | RNVC: 2
3-100-151-02: RNCC: 5 | RNVC: 2
3-100-151-03: RNCC: 5 | RNVC: 2
12286193: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-073-9855
Spur Gearshaft

010739855
12274152: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-073-9854
Spur Gearshaft

010739854
12288361: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-074-6271
Straight Shaft

010746271
8-52-94: RNCC: 3 | RNVC: 9
8-52T07ITEM11: RNCC: 5 | RNVC: 9
8-52-94: RNCC: 5 | RNVC: 9
8-52T-07: RNCC: D | RNVC: 9

6 Apr 1979

3040-01-075-6976
Shouldered Shaft

010756976
657191: RNCC: 3 | RNVC: 2

25 Apr 1979

3040-01-074-9648
Spur Gearshaft

010749648
12267946: RNCC: 3 | RNVC: 2
DAX11441: RNCC: 5 | RNVC: 2

11 Apr 1979

3040-01-076-1757
Shouldered Shaft

010761757
366655: RNCC: 3 | RNVC: 9
9987-961PC222: RNCC: 5 | RNVC: 2
36610-67: RNCC: 5 | RNVC: 2
366655: RNCC: C | RNVC: 1
9987-961: RNCC: D | RNVC: 9

2 May 1979

3040-01-076-3356
Cradle Collar

010763356
68D260080-2197: RNCC: 3 | RNVC: 2
68D260080-2197: RNCC: 5 | RNVC: 2
68D260080: RNCC: D | RNVC: 9

4 May 1979

3040-01-077-1691
Mechanical Drive Housing

010771691
12267243: RNCC: 1 | RNVC: 2
23010670: RNCC: 3 | RNVC: 2

19 May 1979

3040-01-077-2881
Shouldered Shaft

010772881
3016974: RNCC: 3 | RNVC: 2
3224079 ITEM 11: RNCC: 5 | RNVC: 2

20 May 1979

3040-01-077-4150
Detent Plate

010774150
162B8748: RNCC: 3 | RNVC: 2

23 May 1979

3040-01-077-5737
Control Cam

010775737
3224143: RNCC: 3 | RNVC: 2
3224073 ITEM 25: RNCC: 5 | RNVC: 2

26 May 1979

3040-01-079-0449
Shaft Collar

010790449
3017252: RNCC: 3 | RNVC: 2
3224079 ITEM 28: RNCC: 5 | RNVC: 2

25 Jun 1979

3040-01-082-0685
Remote Control Lever

010820685
70302-02147-041: RNCC: 3 | RNVC: 2

25 Aug 1979

3040-01-083-9262
Shouldered Shaft

010839262
2775555-101: RNCC: 3 | RNVC: 2
2775555-101: RNCC: 3 | RNVC: 9

4 Oct 1979

3040-01-084-0464
Rotor Assembl Shaft

010840464
5142412: RNCC: 3 | RNVC: 2
1DD993: RNCC: 5 | RNVC: 2
019-00001-208: RNCC: 5 | RNVC: 2
1DD993: RNCC: 5 | RNVC: 9

7 Oct 1979

3040-01-083-0922
Mechanical Drive Housing

010830922
23016886: RNCC: 3 | RNVC: 2
2AX336: RNCC: 5 | RNVC: 2
6881745: RNCC: 5 | RNVC: 9
2AX336: RNCC: 5 | RNVC: 9
23016886: RNCC: 5 | RNVC: 9

15 Sep 1979

3040-01-086-0822
Straight Shaft

010860822
NP3231000: RNCC: 3 | RNVC: 2
NP3231000: RNCC: 5 | RNVC: 9
NP3231000: RNCC: C | RNVC: 1

20 Nov 1979

3040-01-087-6309
Push-Pull Control Assembly

010876309
21633-520: RNCC: 3 | RNVC: 2

21 Dec 1979

3040-01-088-3326
Shouldered Shaft

010883326
20362-1050: RNCC: 3 | RNVC: 2
20363-004 FIND 15: RNCC: D | RNVC: 9

11 Jan 1980

3040-01-088-8756
Bell Crank

010888756
1128CM42002-3: RNCC: 3 | RNVC: 2
1128CM42002-3: RNCC: 5 | RNVC: 9

22 Jan 1980

3040-01-089-7789
Straight Shaft

010897789
12524302: RNCC: 3 | RNVC: 2
1005-002744: RNCC: 5 | RNVC: 2
1270000051: RNCC: 5 | RNVC: 2
2 0028-132: RNCC: 5 | RNVC: 2
2 0028-132: RNCC: 5 | RNVC: 9
10054059: RNCC: 6 | RNVC: 9

7 Feb 1980

3040-01-089-7787
Shouldered Shaft

010897787
12524312: RNCC: 3 | RNVC: 2

7 Feb 1980

3040-01-089-7774
Pawl

010897774
12524381: RNCC: 3 | RNVC: 2
465-8381: RNCC: 5 | RNVC: 2
465-8381: RNCC: 5 | RNVC: 9

7 Feb 1980

3040-01-092-2080
Rigid Connecting Link

010922080
70400-01250-049: RNCC: 3 | RNVC: 2
2012-7: RNCC: 3 | RNVC: 2
1100020-049: RNCC: 5 | RNVC: 2
AS4-1030-049: RNCC: 5 | RNVC: 9
70400-01250-049: RNCC: 5 | RNVC: 9
SR10992A: RNCC: 5 | RNVC: 9
3040PL1961924: RNCC: 6 | RNVC: 9

21 Mar 1980

3040-01-092-7632
Flexible Core End Fitting

010927632
5073D197-1: RNCC: 3 | RNVC: 2

2 Apr 1980

3040-01-093-1793
Straight Shaft

010931793
94152: RNCC: 3 | RNVC: 2

22 Nov 1990

3040-01-092-6895
Rigid Connecting Link

010926895
70400-01606-041: RNCC: 3 | RNVC: 2
3040PL1954209: RNCC: 6 | RNVC: 9

31 Mar 1980

3040-01-095-1024
Spur Gearshaft

010951024
12292408: RNCC: 3 | RNVC: 2

21 May 1980

3040-01-096-3569
Rigid Connecting Link

010963569
1664C02H02: RNCC: 3 | RNVC: 2
1387F91P06: RNCC: 5 | RNVC: 2

18 Jun 1980

3040-01-098-8949
Shaft Retaining Plate

010988949
16103544: RNCC: 3 | RNVC: 2
16103544: RNCC: 3 | RNVC: 9
16302598PIECE47: RNCC: 5 | RNVC: 2
16302598PIECE47: RNCC: 5 | RNVC: 9

9 Aug 1980

3040-01-098-8957
Hand Control Shaft

010988957
16200513: RNCC: 3 | RNVC: 2
16200513: RNCC: 3 | RNVC: 9
16200513 REV 6: RNCC: D | RNVC: 9

9 Aug 1980

3040-01-098-9443
Linear Actuating Cylinder Assembly Parts Kit

010989443
9-752-100161: RNCC: 3 | RNVC: 9
9-752-100161: RNCC: 5 | RNVC: 2

9 Aug 1980

3040-01-099-8473
Helical Gearshaft

010998473
12292362: RNCC: 3 | RNVC: 2

24 Aug 1980

3040-01-100-4947
Shouldered Shaft

011004947
12009053: RNCC: 3 | RNVC: 2

7 Sep 1980

3040-01-101-9220
Rigid Connecting Link

011019220
20-020-004: RNCC: 3 | RNVC: 2
20-020-002: RNCC: 5 | RNVC: 9

9 Oct 1980

3040-01-102-3470
Nonrotating Shaft Eye Bracket

011023470
12285760-1: RNCC: 3 | RNVC: 2
3040011023470: RNCC: 6 | RNVC: 9

18 Oct 1980

3040-01-105-1470
Gearshaft Assembly

011051470
3500441-4: RNCC: 3 | RNVC: 2
3500441-4: RNCC: 5 | RNVC: 9

18 Dec 1980

3040-01-106-3323
Straight Shaft

011063323
13028073: RNCC: 3 | RNVC: 2
10085824: RNCC: 6 | RNVC: 9

16 Jan 1981

3040-01-107-8172
Bellcrank Fitting

011078172
9-64334-6: RNCC: 3 | RNVC: 2

13 Feb 1981

3040-01-109-0132
Shaft

011090132
791-0933-001: RNCC: 3 | RNVC: 2

9 Mar 1981

3040-01-109-2059
Shouldered Shaft

011092059
11628692: RNCC: 3 | RNVC: 2
11628692: RNCC: 5 | RNVC: 2

12 Mar 1981

3040-01-109-4188
Accumulator Cap

011094188
28354: RNCC: 3 | RNVC: 2
70-28490 ITEM 4: RNCC: 5 | RNVC: 2
70-28490: RNCC: D | RNVC: 9

14 Mar 1981

3040-01-109-4568
Remote Control Lever

011094568
11629607: RNCC: 3 | RNVC: 2
11629607: RNCC: 5 | RNVC: 2

15 Mar 1981

3040-01-110-3981
Bell Crank Support

011103981
12297909: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-110-5566
Rigid Connecting Link

011105566
3365692-1: RNCC: 3 | RNVC: 2
3365692-1: RNCC: 5 | RNVC: 2
3365692-1: RNCC: 5 | RNVC: 9
3365692-1: RNCC: 5 | RNVC: 9

2 Apr 1981

3040-01-109-1770
Rigid Connecting Link

011091770
70400-01614-043: RNCC: 3 | RNVC: 2
3040PL1941632: RNCC: 6 | RNVC: 9
70400-01614: RNCC: D | RNVC: 9

12 Mar 1981

3040-01-111-5681
Linear Actuating Cylinder Assembly Parts Kit

011115681
G35378: RNCC: 3 | RNVC: 2

19 Apr 1981

3040-01-111-5851
Bell Crank

011115851
87749-3901 ITEM 4: RNCC: 3 | RNVC: 2
206-4775633 ITEM 4: RNCC: 5 | RNVC: 2
206-4775633: RNCC: D | RNVC: 9
87749-3901: RNCC: D | RNVC: 9

19 Apr 1981

3040-01-112-8254
Remote Control Lever

011128254
12292377: RNCC: 3 | RNVC: 2
12292423: RNCC: 5 | RNVC: 9

10 May 1981

3040-01-113-6152
Control Cam

011136152
74A480807-2003: RNCC: 3 | RNVC: 2
16143: RNCC: 5 | RNVC: 2
74A480807-2003: RNCC: 5 | RNVC: 2
74A480807-2003: RNCC: 5 | RNVC: 9
10106759: RNCC: 6 | RNVC: 9

30 May 1981

3040-01-114-4067
Rigid Connecting Link

011144067
2600689: RNCC: 3 | RNVC: 2

16 Jun 1981

3040-01-115-2386
Shouldered Shaft

011152386
16702542: RNCC: 3 | RNVC: 2
16702542: RNCC: 3 | RNVC: 9

1 Jul 1981

3040-01-116-3003
Shouldered Shaft

011163003
70309-01004-102: RNCC: 3 | RNVC: 2

24 Jul 1981

3040-01-116-2956
Push-Pull Control Assembly

011162956
S406-1: RNCC: 3 | RNVC: 2
S406: RNCC: 3 | RNVC: 2
S406-1: RNCC: 5 | RNVC: 2
70400-01607-109: RNCC: 5 | RNVC: 2
70400-01607-112: RNCC: 5 | RNVC: 9
3040PL1937561: RNCC: 6 | RNVC: 9
70400-01607: RNCC: D | RNVC: 9

24 Jul 1981

3040-01-116-7078
Shaft Retaining Plate

011167078
145R3131-5: RNCC: 3 | RNVC: 2

1 Aug 1981

3040-01-117-1358
Remote Control Lever

011171358
145H7326-5: RNCC: 3 | RNVC: 2
145H7326-5: RNCC: 5 | RNVC: 2

9 Aug 1981

3040-01-117-1224
Shouldered Shaft

011171224
70400-02108-049: RNCC: 3 | RNVC: 2
3040PL1941285: RNCC: 6 | RNVC: 9

9 Aug 1981

3040-01-117-7354
Rigid Connecting Link

011177354
145C2013-4: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7350
Rigid Connecting Link

011177350
414C2520-4: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7369
Rigid Connecting Link

011177369
145C1415-1: RNCC: 3 | RNVC: 2
145C1415-1: RNCC: 5 | RNVC: 2

21 Aug 1981

3040-01-118-4433
Shouldered Shaft

011184433
20428-1210: RNCC: 3 | RNVC: 2
20428-001 FIND 36: RNCC: 5 | RNVC: 9
20428-001: RNCC: D | RNVC: 9

4 Sep 1981

3040-01-118-6179
Bevel Gearshaft

011186179
9182M13G04: RNCC: 3 | RNVC: 2
9182M13G04: RNCC: 5 | RNVC: 2
9182M13G04: RNCC: 5 | RNVC: 2
9182M13G03: RNCC: 5 | RNVC: 9

6 Sep 1981

3040-01-118-9389
Spur Gearshaft

011189389
132D1711: RNCC: 3 | RNVC: 2
132D1711: RNCC: 5 | RNVC: 9
10106782: RNCC: 6 | RNVC: 9

14 Sep 1981

3040-01-119-2280
Spur Gearshaft

011192280
6035-0027-01: RNCC: 3 | RNVC: 2
10106793: RNCC: 6 | RNVC: 9
6035-0027-01: RNCC: C | RNVC: 1
6035-0027: RNCC: D | RNVC: 9

19 Sep 1981

3040-01-120-8548
Shouldered Shaft

011208548
L116350 AND 131-62: RNCC: 3 | RNVC: 2
L74168: RNCC: 5 | RNVC: 9

24 Oct 1981

3040-01-120-9569
Push-Pull Control Assembly

011209569
1034-B241: RNCC: 3 | RNVC: 2
D5000-545-04 ITEM 29: RNCC: 5 | RNVC: 9
D5540-545-01: RNCC: 5 | RNVC: 9

28 Oct 1981

3040-01-121-1222
Rigid Connecting Link

011211222
12291352: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-1551
Shaft Retaining Plate

011211551
13211E3029: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-1554
Shaft Retaining Plate

011211554
13211E3146: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-2115
Remote Control Lever

011212115
11672342: RNCC: 3 | RNVC: 2

1 Nov 1981

3040-01-123-5080
Linear Actuating Cylinder Cap

011235080
28628: RNCC: 3 | RNVC: 2
1270-28625 ITEM 5: RNCC: 5 | RNVC: 2
1270-28625: RNCC: D | RNVC: 9

13 Dec 1981

3040-01-123-8708
Shaft

011238708
5400-0021: RNCC: 3 | RNVC: 2
5400-0021: RNCC: 3 | RNVC: 9

18 Dec 1981

3040-01-124-3810
Manual Control Lever

011243810
1011628: RNCC: 3 | RNVC: 2
55755C101: RNCC: 5 | RNVC: 9
755C101: RNCC: 5 | RNVC: 9
1FM: RNCC: 5 | RNVC: 9
910-168PC 20: RNCC: 5 | RNVC: 9
410B008: RNCC: 5 | RNVC: 9
1C F91363 8INCH: RNCC: C | RNVC: 1
1F3: RNCC: C | RNVC: 1
410-009: RNCC: C | RNVC: 1
1C: RNCC: C | RNVC: 1

1 Jan 1982

3040-01-124-2816
Rigid Connecting Link

011242816
74A661261-1001: RNCC: 3 | RNVC: 2
74A661261-1001: RNCC: 5 | RNVC: 2
74A661261-1001: RNCC: 5 | RNVC: 9
10106807: RNCC: 6 | RNVC: 9
74A661261: RNCC: D | RNVC: 9

30 Dec 1981

3040-01-125-6924
Shouldered Shaft

011256924
65265-02012-101: RNCC: 3 | RNVC: 2
65265-02012-101: RNCC: 5 | RNVC: 2
65265-02012-101: RNCC: 5 | RNVC: 9
ES3-DWG-1770: RNCC: 5 | RNVC: 9
65265-02012-101: RNCC: 5 | RNVC: 9

1 Feb 1982

3040-01-126-6012
Shouldered Shaft

011266012
65130-07121-104: RNCC: 3 | RNVC: 2

14 Feb 1982

3040-01-125-9178
Brake Disc

011259178
133-609: RNCC: 3 | RNVC: 2
65397-11902-101: RNCC: 5 | RNVC: 2

1 Feb 1982

3040-01-127-7039
Shouldered Shaft

011277039
78282: RNCC: 3 | RNVC: 2

6 Mar 1982

3040-01-128-1487
Linear Actuating Cylinder Assembly Parts Kit

011281487
138675: RNCC: 3 | RNVC: 2
052-PS017-400: RNCC: 5 | RNVC: 9
138675: RNCC: 5 | RNVC: 9

18 Mar 1982

3040-01-128-2404
Rigid Connecting Link

011282404
6512-7: RNCC: 3 | RNVC: 2
SR11393A107: RNCC: 5 | RNVC: 9
10106838: RNCC: 6 | RNVC: 9
SR11393A: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-128-2402
Rigid Connecting Link

011282402
74A460604-1003: RNCC: 3 | RNVC: 2
74A460604-1003: RNCC: 5 | RNVC: 2
10153950: RNCC: 6 | RNVC: 9
74A460604: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-128-2405
Rigid Connecting Link

011282405
74A635604-2001: RNCC: 3 | RNVC: 2
74A635604-2001: RNCC: 5 | RNVC: 2
10106839: RNCC: 6 | RNVC: 9
PL74A635604: RNCC: D | RNVC: 9
74A635604: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-128-5476
Pawl

011285476
9348295: RNCC: 3 | RNVC: 2
22664: RNCC: 5 | RNVC: 1
3616640010: RNCC: 5 | RNVC: 2
711531516304: RNCC: 6 | RNVC: 9
10421322: RNCC: 6 | RNVC: 9

25 Mar 1982

3040-01-128-5832
Hub Clamp

011285832
74A731124-1001: RNCC: 3 | RNVC: 2
74A731124-1001: RNCC: 5 | RNVC: 2
74A731124-1001: RNCC: 5 | RNVC: 9
10106848: RNCC: 6 | RNVC: 9
74A731124: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-129-1876
Linear Actuating Cylinder Piston

011291876
87841-0208 ITEM 2: RNCC: 3 | RNVC: 2
708-4684961 ITEM 2: RNCC: 3 | RNVC: 2
708-4684961 ITEM 2: RNCC: 5 | RNVC: 2
708-4684961: RNCC: D | RNVC: 9

1 Apr 1982

3040-01-129-3560
Shouldered Shaft

011293560
65391-11668-102: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3929
Bell Crank

011293929
65413-06401-041: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-064-8864
Straight Shaft

010648864
11670869: RNCC: 3 | RNVC: 2

4 Sep 1978

3040-01-068-4404
Lower Right Front Push-Pull Control Assy

010684404
2528356: RNCC: 3 | RNVC: 2

25 Nov 1978

3040-01-106-5968
Shouldered Shaft

011065968
12292481: RNCC: 3 | RNVC: 2

22 Jan 1981

3040-01-106-9465
Shouldered Shaft

011069465
8347-15: RNCC: 3 | RNVC: 2

28 Jan 1981

3040-01-110-2313
Cylinder Head Cap

011102313
70044: RNCC: 3 | RNVC: 2

28 Mar 1981

3040-01-110-4301
Rigid Connecting Link

011104301
11629544: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-125-8204
Bell Crank

011258204
3930AS541-1: RNCC: 3 | RNVC: 2
3930AS541-1: RNCC: 5 | RNVC: 2
74A733024-2001: RNCC: 5 | RNVC: 9
74A733024-2001: RNCC: 5 | RNVC: 9
10106817: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-058-6262
Body Hub

010586262
3990416HL: RNCC: 3 | RNVC: 9

29 Mar 1978

3040-01-062-8199
Missile Snubber Cam

010628199
16S251-9: RNCC: 3 | RNVC: 2
16S251-9: RNCC: 3 | RNVC: 2
16S291-9: RNCC: 5 | RNVC: 2
16S251-9C: RNCC: 5 | RNVC: 2
16S251-9: RNCC: 5 | RNVC: 9

22 Jul 1978

3040-01-063-7778
Straight Shaft

010637778
31071-5: RNCC: 3 | RNVC: 2

13 Aug 1978

3040-01-067-5675
Straight Shaft

010675675
2P6245: RNCC: 3 | RNVC: 2
IPD2P6245: RNCC: 5 | RNVC: 9

3 Nov 1978

3040-01-068-0404
Linear Actuating Cylinder Piston

010680404
501929: RNCC: 3 | RNVC: 2
501929: RNCC: 3 | RNVC: 2

15 Nov 1978

3040-01-071-9846
Push-Pull Control Assembly

010719846
12266497-3: RNCC: 1 | RNVC: 2
565-749-005: RNCC: 3 | RNVC: 2
565-749-005: RNCC: C | RNVC: 1

18 Feb 1979

3040-01-071-6105
Rigid Connecting Link

010716105
16K0571-849: RNCC: 3 | RNVC: 2
3040PL0666048: RNCC: 6 | RNVC: 9

10 Feb 1979

3040-01-072-8171
Control Cam

010728171
12283265: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-072-8157
Shouldered Shaft

010728157
12283293: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-073-3059
Linear Actuating Cylinder Piston

010733059
12283305: RNCC: 3 | RNVC: 2

14 Mar 1979

3040-01-073-3057
Linear Actuating Cylinder Cap

010733057
12283307: RNCC: 3 | RNVC: 2

14 Mar 1979

3040-01-073-9706
Shaft Retaining Plate

010739706
12274142: RNCC: 3 | RNVC: 2
3040010739706: RNCC: 6 | RNVC: 9

24 Mar 1979

3040-01-073-4338
Linear Actuating Cylinder Piston

010734338
12267103: RNCC: 3 | RNVC: 2
12267103: RNCC: 5 | RNVC: 2
DAX10944: RNCC: 5 | RNVC: 9

15 Mar 1979

3040-01-073-9714
Shaft Collar

010739714
12274188: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-074-4639
Worm Shaft

010744639
02-4578-02: RNCC: 3 | RNVC: 2
2-1538: RNCC: 5 | RNVC: 9
02-1538-00: RNCC: 5 | RNVC: 9
A29669-001: RNCC: 5 | RNVC: 9
FDE474 PAGE 4 ITEM 9: RNCC: C | RNVC: 1

31 Mar 1979

3040-01-074-9986
Rigid Connecting Link

010749986
212-001-052-105: RNCC: 3 | RNVC: 2
212-001-052-105: RNCC: 5 | RNVC: 2
212-001-052-105: RNCC: 5 | RNVC: 2

11 Apr 1979

3040-01-076-4341
Straight Shaft

010764341
12277444: RNCC: 3 | RNVC: 9
12277444: RNCC: 5 | RNVC: 2

6 May 1979

3040-01-076-2267
Spur Gearshaft

010762267
000993-858-1: RNCC: 3 | RNVC: 2
7749879: RNCC: 5 | RNVC: 9
7749879-1: RNCC: 5 | RNVC: 9
000993-858: RNCC: D | RNVC: 9

3 May 1979

3040-01-077-4388
Rigid Connecting Link

010774388
4500-219: RNCC: 3 | RNVC: 2
4500: RNCC: D | RNVC: 9

23 May 1979

3040-01-078-1190
Nonrotating Shaft Eye Bracket

010781190
12282043: RNCC: 3 | RNVC: 2
12282043: RNCC: D | RNVC: 9

9 Jun 1979

3040-01-078-1191
Shouldered Shaft

010781191
12282047: RNCC: 3 | RNVC: 2
3040010781191: RNCC: 6 | RNVC: 9

9 Jun 1979

3040-01-078-7702
Flexible Drive Shaft

010787702
12271708: RNCC: 3 | RNVC: 2
312-16213X-2: RNCC: 5 | RNVC: 2
3XR3-8.44: RNCC: 5 | RNVC: 2
312-16213X-2: RNCC: 5 | RNVC: 9
3XR3-8.44: RNCC: 5 | RNVC: 9

20 Jun 1979

3040-01-079-3463
Pawl

010793463
3500774-3: RNCC: 3 | RNVC: 2
3500774-1: RNCC: 5 | RNVC: 9
3500774-1: RNCC: 5 | RNVC: 9

1 Jul 1979

3040-01-081-2144
Spur Gearshaft

010812144
12286970: RNCC: 1 | RNVC: 2
2524743-1: RNCC: 3 | RNVC: 2
2524743-1: RNCC: 5 | RNVC: 2
2524743: RNCC: 5 | RNVC: 9
524743: RNCC: 5 | RNVC: 9
3040010812144: RNCC: 6 | RNVC: 9

10 Aug 1979

3040-01-083-3494
Inner Assembly Shaft

010833494
5073F152-1: RNCC: 3 | RNVC: 2

21 Sep 1979

3040-01-083-5644
Straight Shaft

010835644
12284021: RNCC: 3 | RNVC: 2
XM6028: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-01-084-1324
Shouldered Shaft

010841324
12267822: RNCC: 3 | RNVC: 2
DAX12803: RNCC: 5 | RNVC: 2

11 Oct 1979

3040-01-085-1512
Shouldered Shaft

010851512
XA3997-7: RNCC: 3 | RNVC: 2

31 Oct 1979

3040-01-084-9647
Shouldered Shaft

010849647
NP3352003: RNCC: 3 | RNVC: 9
NP3352003: RNCC: C | RNVC: 1

27 Oct 1979

3040-01-087-0272
Linear Actuating Cylinder Assembly Parts Kit

010870272
9056097: RNCC: 3 | RNVC: 9
3324-34: RNCC: 5 | RNVC: 2
300650: RNCC: 5 | RNVC: 9

10 Dec 1979

3040-01-087-4276
Shouldered Shaft

010874276
5034T80P01: RNCC: 3 | RNVC: 2

17 Dec 1979

3040-01-087-4293
Control Cam

010874293
755218-2: RNCC: 3 | RNVC: 2
755218-2: RNCC: 5 | RNVC: 2
755218-2: RNCC: 5 | RNVC: 2

17 Dec 1979

3040-01-088-1129
Pivot Shaft

010881129
9240-003 SHEET 19: RNCC: 3 | RNVC: 2
26800118: RNCC: 5 | RNVC: 9
9240-003-19: RNCC: 5 | RNVC: 9

6 Jan 1980

3040-01-089-1425
Flexible Shaft Assembly

010891425
FR150SHXBH0400: RNCC: 3 | RNVC: 2
3XK6-4: RNCC: 3 | RNVC: 9

26 Jan 1980

3040-01-089-2055
Shouldered Shaft

010892055
5143232: RNCC: 3 | RNVC: 2
019-00001-840: RNCC: 5 | RNVC: 2
5143233: RNCC: 5 | RNVC: 9

27 Jan 1980

3040-01-089-3087
Shouldered Shaft

010893087
117D2306: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-089-9995
Shaft And Pin

010899995
210110: RNCC: 3 | RNVC: 2

10 Feb 1980

3040-01-089-7755
Worm Shaft

010897755
12524251: RNCC: 3 | RNVC: 2

7 Feb 1980

3040-01-091-3844
Rigid Connecting Link

010913844
70400-02252-129: RNCC: 1 | RNVC: 2
2004-5: RNCC: 3 | RNVC: 2
AS4-1000-129: RNCC: 5 | RNVC: 9
1100090-129: RNCC: 5 | RNVC: 9
SR11728A: RNCC: 5 | RNVC: 9
3040PL1938105: RNCC: 6 | RNVC: 9

7 Mar 1980

3040-01-091-3846
Rigid Connecting Link

010913846
70400-02252-122: RNCC: 3 | RNVC: 2
70400-02252-122: RNCC: 5 | RNVC: 9
1100080-122: RNCC: 5 | RNVC: 9
2007-1: RNCC: 5 | RNVC: 9
SR11721A: RNCC: 5 | RNVC: 9
3040PL1961972: RNCC: 6 | RNVC: 9
70400-02252: RNCC: D | RNVC: 9

7 Mar 1980

3040-01-092-2078
Rigid Connecting Link

010922078
70400-01250-046: RNCC: 3 | RNVC: 2
1100020-046: RNCC: 5 | RNVC: 9
2012-5: RNCC: 5 | RNVC: 9
AS4-1030-046: RNCC: 5 | RNVC: 9
SR10989A: RNCC: 5 | RNVC: 9

21 Mar 1980

3040-01-094-8823
Gear Reduction Housing Assy

010948823
11686369: RNCC: 3 | RNVC: 2

17 May 1980

3040-01-096-3934
Straight Shaft

010963934
384-1165-00: RNCC: 3 | RNVC: 2

18 Jun 1980

3040-01-096-1149
Shouldered Shaft

010961149
70217-01031-116: RNCC: 3 | RNVC: 2
70217-01031-116: RNCC: 5 | RNVC: 9

14 Jun 1980

3040-01-097-6716
Shaft Collar

010976716
11584765: RNCC: 3 | RNVC: 2

17 Jul 1980

3040-01-098-6945
Shouldered Shaft

010986945
16200492: RNCC: 3 | RNVC: 2
16200492: RNCC: 3 | RNVC: 9
NAFB4478G: RNCC: 5 | RNVC: 9
CAFB4478G: RNCC: 5 | RNVC: 9
CAFB4478G: RNCC: C | RNVC: 1
16200494: RNCC: C | RNVC: 1

7 Aug 1980

3040-01-099-0162
Shouldered Shaft

010990162
12295228: RNCC: 3 | RNVC: 2
12295228: RNCC: 5 | RNVC: 2

10 Aug 1980

3040-01-098-8948
Rigid Connecting Link

010988948
16102051: RNCC: 3 | RNVC: 2
16102051: RNCC: 3 | RNVC: 9
16403147 ITEM 43: RNCC: 5 | RNVC: 2
CAFB5082A: RNCC: 5 | RNVC: 2
16403147 ITEM 43: RNCC: 5 | RNVC: 9
CAFB5082A: RNCC: 5 | RNVC: 9

9 Aug 1980

3040-01-099-1414
Push-Pull Control Assembly

010991414
13217E6815-2: RNCC: 3 | RNVC: 2
048711-00-048.C: RNCC: 5 | RNVC: 2
048701-00-048.C: RNCC: 5 | RNVC: 9
048701-00-048.C: RNCC: 5 | RNVC: 9
B48701-48-00: RNCC: 5 | RNVC: 9
13217E6815: RNCC: 5 | RNVC: 9

13 Aug 1980

3040-01-101-1846
Rotating Shaft Eye Bracket

011011846
G2100: RNCC: 3 | RNVC: 2

21 Sep 1980

3040-01-100-4924
Piston Ring

011004924
9-904-103589: RNCC: 3 | RNVC: 2
250087: RNCC: 5 | RNVC: 2
222104: RNCC: 5 | RNVC: 2
222104: RNCC: 5 | RNVC: 9

7 Sep 1980

3040-01-102-8167
Rotating Shaft Eye Bracket

011028167
43719: RNCC: 3 | RNVC: 2
43719: RNCC: 5 | RNVC: 9
63480: RNCC: 5 | RNVC: 9

29 Oct 1980

3040-01-102-9104
Remote Control Lever

011029104
04110306: RNCC: 3 | RNVC: 2

30 Oct 1980

3040-01-103-7302
Straight Shaft

011037302
778-1535-003: RNCC: 3 | RNVC: 2
778-1535: RNCC: D | RNVC: 9

18 Nov 1980

3040-01-104-0187
Shouldered Shaft

011040187
26-2290: RNCC: 3 | RNVC: 2

25 Nov 1980

3040-01-105-2707
Shouldered Shaft

011052707
60520-01: RNCC: 3 | RNVC: 2
30030 ITEM 6: RNCC: 5 | RNVC: 2
30030: RNCC: D | RNVC: 9

19 Dec 1980

3040-01-106-7811
Rotating Shaft Eye Bracket

011067811
12297751: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-107-0996
Straight Shaft

011070996
13028009: RNCC: 3 | RNVC: 2
10085825: RNCC: 6 | RNVC: 9

30 Jan 1981

3040-01-107-6786
Shouldered Shaft

011076786
74A450613-2005: RNCC: 3 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 2
74A450613-2005: RNCC: 5 | RNVC: 9
74A450613-2005: RNCC: 5 | RNVC: 9
74A450613-2005: RNCC: 5 | RNVC: 9
74A450613-2005: RNCC: 5 | RNVC: 9

11 Feb 1981

3040-01-107-7544
Rigid Connecting Link

011077544
2600129-1: RNCC: 3 | RNVC: 2
2600129-1: RNCC: 5 | RNVC: 2

12 Feb 1981

3040-01-108-4911
Shouldered Shaft

011084911
12292671: RNCC: 3 | RNVC: 2

28 Feb 1981

3040-01-109-2549
Remote Control Lever

011092549
118-108: RNCC: 3 | RNVC: 2

12 Mar 1981

3040-01-109-3059
Bell Crank

011093059
70400-01212-043: RNCC: 3 | RNVC: 2

12 Mar 1981

3040-01-109-4399
Control Cam

011094399
28363: RNCC: 3 | RNVC: 2
60-28380 ITEM 18: RNCC: 5 | RNVC: 2
60-28380: RNCC: D | RNVC: 9

15 Mar 1981

3040-01-108-5343
Bell Crank

011085343
12299010: RNCC: 3 | RNVC: 2
1229010: RNCC: 5 | RNVC: 9
10085843: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-110-3805
Shaft Retaining Plate

011103805
804589-1: RNCC: 3 | RNVC: 2
1-030-046: RNCC: 5 | RNVC: 2

29 Mar 1981

3040-01-111-4408
Rigid Connecting Link

011114408
3161452-8: RNCC: 3 | RNVC: 2
3161452-8: RNCC: 5 | RNVC: 9

17 Apr 1981

3040-01-112-3003
Control Assembly

011123003
13216E6328-3: RNCC: 3 | RNVC: 2
130-032-498: RNCC: 5 | RNVC: 2
130-032-498: RNCC: 5 | RNVC: 9

1 May 1981

3040-01-112-8770
Straight Shaft

011128770
3365758-1: RNCC: 3 | RNVC: 2
3365758-1: RNCC: 5 | RNVC: 2
3365758-1: RNCC: 5 | RNVC: 2

12 May 1981

3040-01-114-6187
Shouldered Shaft

011146187
1587269-4: RNCC: 3 | RNVC: 2
1587269-4: RNCC: 5 | RNVC: 9

20 Jun 1981

3040-01-114-6650
Shouldered Shaft

011146650
3882603-1: RNCC: 3 | RNVC: 2
3882603-1: RNCC: 5 | RNVC: 9

20 Jun 1981

3040-01-114-9288
Shouldered Shaft

011149288
35 79501 2140 3: RNCC: 3 | RNVC: 2

25 Jun 1981

3040-01-115-0904
Shouldered Shaft

011150904
L102738: RNCC: 3 | RNVC: 2

27 Jun 1981

3040-01-115-5989
Straight Shaft

011155989
A6-27: RNCC: 3 | RNVC: 2
658-451-9215: RNCC: 5 | RNVC: 2
933C055431-1: RNCC: 5 | RNVC: 9
055431-1: RNCC: 7 | RNVC: 2
933C055431-1: RNCC: C | RNVC: 1

10 Jul 1981

3040-01-116-1311
Shouldered Shaft

011161311
142D5222: RNCC: 3 | RNVC: 2
10106771: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-116-8481
Shouldered Shaft

011168481
4202014-1: RNCC: 3 | RNVC: 2
10106774: RNCC: 6 | RNVC: 9

4 Aug 1981

3040-01-116-8156
Shouldered Shaft

011168156
12292456: RNCC: 3 | RNVC: 2

3 Aug 1981

3040-01-117-5224
Shouldered Shaft

011175224
12292608: RNCC: 3 | RNVC: 2

15 Aug 1981

3040-01-117-7358
Rigid Connecting Link

011177358
145C3340-7: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7491
Shouldered Shaft

011177491
2645238: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-118-5286
Brake Disc

011185286
AS-134521: RNCC: 3 | RNVC: 9
AS-134521: RNCC: 5 | RNVC: 2
AS-134521: RNCC: 5 | RNVC: 9

11 Mar 2003

3040-01-119-9101
Clamp Head Plate

011199101
215-844-3200: RNCC: 3 | RNVC: 2
88-D-393: RNCC: 3 | RNVC: 2
4687549-0005: RNCC: 3 | RNVC: 2
2642-693-02 ITEM 5: RNCC: 5 | RNVC: 2
845-4687549 ITEM 5: RNCC: 5 | RNVC: 2
20-83-0500: RNCC: 5 | RNVC: 9
2642-693-02 ITEM5: RNCC: 5 | RNVC: 9
2642-693-02: RNCC: D | RNVC: 9
845-4687549: RNCC: D | RNVC: 9

7 Oct 1981

3040-01-120-8286
Shouldered Shaft

011208286
609-4676630 ITEM2: RNCC: 3 | RNVC: 2
87577-3310IT2: RNCC: 3 | RNVC: 2
87577-3310 ITEM 2: RNCC: 5 | RNVC: 2
609-4676630ITEM2: RNCC: 5 | RNVC: 2
609-4676630: RNCC: D | RNVC: 9

23 Oct 1981

3040-01-120-2885
Housing Assembly

011202885
12290725-1: RNCC: 3 | RNVC: 2

15 Oct 1981

3040-01-120-4558
Spur Gearshaft

011204558
1092542: RNCC: 3 | RNVC: 2

18 Oct 1981

3040-01-121-1903
Valve Shaft

011211903
20428-2131: RNCC: 3 | RNVC: 2
20428-001 FIND 25: RNCC: 5 | RNVC: 9
20428-002 FIND 25: RNCC: 5 | RNVC: 9
20428-1040: RNCC: 5 | RNVC: 9
20428-001: RNCC: D | RNVC: 9

31 Oct 1981

3040-01-121-1993
Rigid Connecting Link

011211993
87643-7504 ITEM 12: RNCC: 3 | RNVC: 2
501-4675698 ITEM 12: RNCC: 5 | RNVC: 2
501-4675698: RNCC: D | RNVC: 9
87643-7504: RNCC: D | RNVC: 9

31 Oct 1981

3040-01-121-1911
Straight Shaft

011211911
803-4384431-A-080: RNCC: 3 | RNVC: 2
810-4384431-A-37: RNCC: 5 | RNVC: 9
810-4384431: RNCC: D | RNVC: 9
803-4384431: RNCC: D | RNVC: 9

31 Oct 1981

3040-01-123-2231
Counterbalance Weight

011232231
579-1047-05: RNCC: 3 | RNVC: 2
10163647: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-123-5749
Shaft Retaining Plate

011235749
520-4674728 ITEM 6: RNCC: 3 | RNVC: 2
87615-2010 ITEM 6: RNCC: 3 | RNVC: 2
520-4674728: RNCC: D | RNVC: 9
87615-2010: RNCC: D | RNVC: 9

15 Dec 1981

3040-01-123-5723
Shouldered Shaft

011235723
87776-0106 ITEM 7: RNCC: 3 | RNVC: 2
201-4684481 ITEM 7: RNCC: 5 | RNVC: 2
87776-0106 ITEM 7: RNCC: 5 | RNVC: 9
201-4684481: RNCC: D | RNVC: 9
87776-0106: RNCC: D | RNVC: 9

15 Dec 1981

3040-01-125-0537
Shaft Retaining Plate

011250537
12307436: RNCC: 3 | RNVC: 2

20 Jan 1982

3040-01-125-0645
Shouldered Shaft

011250645
3168811-2: RNCC: 3 | RNVC: 2
10106809: RNCC: 6 | RNVC: 9

20 Jan 1982

3040-01-125-0611
Shouldered Shaft

011250611
12307395: RNCC: 3 | RNVC: 2

20 Jan 1982

3040-01-125-7327
Bevel Gearshaft

011257327
65391-11692-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8362
Shouldered Shaft

011258362
1534AS427: RNCC: 3 | RNVC: 2
1534AS427: RNCC: 5 | RNVC: 2
1534AS427: RNCC: 5 | RNVC: 2
1534AS427: RNCC: 5 | RNVC: 2
1534AS427: RNCC: 5 | RNVC: 2
D013448-1: RNCC: 5 | RNVC: 9
1534AS427: RNCC: 5 | RNVC: 9
10106824: RNCC: 6 | RNVC: 9
D013448-1: RNCC: C | RNVC: 1

1 Feb 1982

3040-01-125-8507
Lever-Wedge Lock Indicator

011258507
74A733608-2007: RNCC: 3 | RNVC: 2
74A733608-2007: RNCC: 5 | RNVC: 1
3929AS865: RNCC: 5 | RNVC: 2
74A733608-2007: RNCC: 5 | RNVC: 9
74A733608-2007: RNCC: C | RNVC: 1

1 Feb 1982

3040-01-125-9990
Speedometer-Tachometer Drive Adapter

011259990
5145978: RNCC: 3 | RNVC: 2

5 Feb 1982

3040-01-126-9054
Linear Actuating Cylinder Assembly

011269054
G106168: RNCC: 3 | RNVC: 2
G101177: RNCC: 5 | RNVC: 9

19 Feb 1982

3040-01-128-2400
Rigid Connecting Link

011282400
74A733026-2001: RNCC: 3 | RNVC: 2
3930AS521: RNCC: 3 | RNVC: 2
74A733026-2001: RNCC: 5 | RNVC: 2
74A733026-2001: RNCC: 5 | RNVC: 2
74A733026-2001: RNCC: 5 | RNVC: 9
10106836: RNCC: 6 | RNVC: 9
74A733026: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-127-8236
Rigid Connecting Link

011278236
1534AS211: RNCC: 3 | RNVC: 2
1534AS211: RNCC: 5 | RNVC: 2
1534AS211: RNCC: 5 | RNVC: 2
1534AS211: RNCC: 5 | RNVC: 2
1534AS211: RNCC: 5 | RNVC: 2
D013429-501: RNCC: 5 | RNVC: 9
D013429-501: RNCC: 5 | RNVC: 9
1534AS211: RNCC: 5 | RNVC: 9
10143580: RNCC: 6 | RNVC: 9
D013429: RNCC: D | RNVC: 9

9 Mar 1982

3040-01-128-5875
Spur Gearshaft

011285875
2771554-102: RNCC: 3 | RNVC: 2
2771554-102: RNCC: 3 | RNVC: 9
10130548: RNCC: 6 | RNVC: 9
2771554: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-129-0897
Rigid Connecting Link

011290897
4700-9: RNCC: 3 | RNVC: 2
74J618000-113: RNCC: 5 | RNVC: 2
SR11573A113: RNCC: 5 | RNVC: 9
10106864: RNCC: 6 | RNVC: 9

31 Mar 1982

3040-01-062-4166
Straight Shaft

010624166
31085-1: RNCC: 3 | RNVC: 2

16 Jul 1978

3040-01-062-4053
Rigid Connecting Link

010624053
107C1550-11: RNCC: 3 | RNVC: 2
107C1550-11: RNCC: 5 | RNVC: 2

15 Jul 1978

3040-01-061-3865
Rigid Connecting Link

010613865
4500-289: RNCC: 3 | RNVC: 2
4028-33: RNCC: 5 | RNVC: 9

19 Jun 1978

3040-01-063-9311
Counterbalance Weight

010639311
579-1024-05: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-064-7716
Shouldered Shaft

010647716
F-5X9H10X1: RNCC: 3 | RNVC: 9
PL-11140-F-18 ITEM10: RNCC: 5 | RNVC: 9
F-5X9H10X1: RNCC: 5 | RNVC: 9
F-5X9H10X1: RNCC: C | RNVC: 1
PL-11140-F-18 ITEM10: RNCC: C | RNVC: 1
11087-F-18: RNCC: D | RNVC: 9

31 Aug 1978

3040-01-064-2848
Linear Actuating Cylinder Assembly

010642848
8071-001: RNCC: 3 | RNVC: 2
10210: RNCC: 5 | RNVC: 2
3000-0067: RNCC: 5 | RNVC: 2
3000-0067: RNCC: 5 | RNVC: 9
10210: RNCC: 5 | RNVC: 9
10210: RNCC: 5 | RNVC: 9

20 Aug 1978

3040-01-065-5122
Rigid Connecting Link

010655122
709-4684909 ITEM 28: RNCC: 3 | RNVC: 2

21 Sep 1978

3040-01-067-6345
Control Cam

010676345
834493PC36: RNCC: 3 | RNVC: 2
829942: RNCC: 5 | RNVC: 2
834493: RNCC: D | RNVC: 9

4 Nov 1978

3040-01-067-7507
Shouldered Shaft

010677507
507309: RNCC: 3 | RNVC: 2
507309: RNCC: 3 | RNVC: 2

6 Nov 1978

3040-01-069-2071
Shouldered Shaft

010692071
3151026: RNCC: 3 | RNVC: 2
3151026: RNCC: 5 | RNVC: 2
3151026: RNCC: 5 | RNVC: 2
782801: RNCC: 5 | RNVC: 2
782801: RNCC: 5 | RNVC: 9
782801-000: RNCC: 5 | RNVC: 9

10 Dec 1978

3040-01-070-5967
Rigid Connecting Link

010705967
12265631: RNCC: 3 | RNVC: 2

14 Jan 1979

3040-01-074-3695
Rigid Connecting Link

010743695
12271202: RNCC: 3 | RNVC: 2
3-160-033-02: RNCC: 5 | RNVC: 2
12286594: RNCC: 5 | RNVC: 9

30 Mar 1979

3040-01-074-3745
Remote Control Lever

010743745
12286483: RNCC: 3 | RNVC: 2
3-140-074-18: RNCC: 5 | RNVC: 2

30 Mar 1979

3040-01-075-7390
Spur Gearshaft

010757390
24001: RNCC: 3 | RNVC: 2
2000-23150 ITEM 1: RNCC: 5 | RNVC: 2

26 Apr 1979

3040-01-076-8667
Linear Actuating Cylinder Piston

010768667
9N4018: RNCC: 3 | RNVC: 2

13 May 1979

3040-01-078-4383
Shouldered Shaft

010784383
12283096: RNCC: 3 | RNVC: 2
XM66690: RNCC: 5 | RNVC: 9

13 Jun 1979

3040-01-079-3030
Rigid Connecting Link

010793030
12278972: RNCC: 3 | RNVC: 2

1 Jul 1979

3040-01-079-4798
Spur Gearshaft

010794798
12267961: RNCC: 3 | RNVC: 2
12267961: RNCC: 5 | RNVC: 2
DAX12724: RNCC: 5 | RNVC: 9
3040010794798: RNCC: 6 | RNVC: 9

7 Jul 1979

3040-01-081-1757
Linear Actuating Cylinder Head

010811757
12267182: RNCC: 1 | RNVC: 2
23011045: RNCC: 3 | RNVC: 2
DAX12890: RNCC: 5 | RNVC: 2

10 Aug 1979

3040-01-082-7394
Rigid Connecting Link

010827394
16P182-3: RNCC: 3 | RNVC: 2
16P182-3: RNCC: 5 | RNVC: 2
3040PL0666824: RNCC: 6 | RNVC: 9
16P182-3: RNCC: 8 | RNVC: 2

9 Sep 1979

3040-01-082-7911
Linear Actuating Cylinder Piston

010827911
2775539-101: RNCC: 3 | RNVC: 2
2775539-101: RNCC: 5 | RNVC: 2

10 Sep 1979

3040-01-083-5657
Linear Actuating Cylinder Assembly Parts Kit

010835657
355909: RNCC: 3 | RNVC: 2
355909: RNCC: 5 | RNVC: 2
280118: RNCC: 5 | RNVC: 9
176528: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-01-084-1327
Shouldered Shaft

010841327
12267411: RNCC: 3 | RNVC: 2
12267411: RNCC: 5 | RNVC: 2
DAX12547: RNCC: 5 | RNVC: 9

11 Oct 1979

3040-01-084-5978
Shaft Assembly

010845978
2665169: RNCC: 3 | RNVC: 2

23 Oct 1979

3040-01-084-5515
Bell Crank

010845515
L51047: RNCC: 3 | RNVC: 2

20 Oct 1979

3040-01-084-7864
Linear Actuating Cylinder

010847864
87434-2510 ITEM 10: RNCC: 3 | RNVC: 2
4677777A-0010: RNCC: 5 | RNVC: 2
123-4677777 ITEM10: RNCC: 5 | RNVC: 2
123-4677777 ITE: RNCC: C | RNVC: 1

24 Oct 1979

3040-01-087-1294
Piston Ring

010871294
73769: RNCC: 3 | RNVC: 2
73405 ITEM 30: RNCC: 5 | RNVC: 2
NK3150-1: RNCC: C | RNVC: 1
73405: RNCC: D | RNVC: 9

12 Dec 1979

3040-01-088-2324
Ball Joint

010882324
55888-1: RNCC: 3 | RNVC: 9
55888-1: RNCC: 5 | RNVC: 2
55888-1: RNCC: 5 | RNVC: 9

8 Jan 1980

3040-01-088-9401
Straight Shaft

010889401
12256551: RNCC: 3 | RNVC: 2

23 Jan 1980

3040-01-087-1606
Rigid Connecting Link

010871606
70400-02264-063: RNCC: 3 | RNVC: 2
70400-02264-063: RNCC: 5 | RNVC: 2
70400-02264-057: RNCC: 5 | RNVC: 9
3040PL1983139: RNCC: 6 | RNVC: 9
70400-02264-063: RNCC: 7 | RNVC: 2

13 Dec 1979

3040-01-090-4483
Bell Crank

010904483
12255965-2: RNCC: 3 | RNVC: 2

17 Feb 1980

3040-01-090-8214
Straight Shaft

010908214
72D225609-2027: RNCC: 3 | RNVC: 2

24 Feb 1980

3040-01-091-3843
Rigid Connecting Link

010913843
70400-02252-116: RNCC: 3 | RNVC: 2
1100060-116: RNCC: 5 | RNVC: 9
2002-3: RNCC: 5 | RNVC: 9
70400-02252-116: RNCC: 5 | RNVC: 9
SR11716A: RNCC: 5 | RNVC: 9
3040PL1959349: RNCC: 6 | RNVC: 9

7 Mar 1980

3040-01-091-7577
Shouldered Shaft

010917577
14-50758-5: RNCC: 3 | RNVC: 2
14-50758-5: RNCC: 5 | RNVC: 9

12 Mar 1980

3040-01-093-3060
Extension Shaft

010933060
384-1311-01: RNCC: 3 | RNVC: 2

15 Apr 1980

3040-01-095-1022
Spur Gearshaft

010951022
12292370: RNCC: 3 | RNVC: 2

21 May 1980

3040-01-095-3237
Bevel Gearshaft

010953237
519917-1: RNCC: 3 | RNVC: 2

29 May 1980

3040-01-095-7522
Rigid Connecting Link

010957522
70400-01255-103: RNCC: 1 | RNVC: 2
2020-3: RNCC: 3 | RNVC: 2
70400-01255-103: RNCC: 5 | RNVC: 9
SR11629A-103: RNCC: 5 | RNVC: 9
3040PL1939759: RNCC: 6 | RNVC: 9
70400-01255: RNCC: D | RNVC: 9

5 Jun 1980

3040-01-096-1136
Rigid Connecting Link

010961136
70400-02252-130: RNCC: 3 | RNVC: 2
2003-1: RNCC: 5 | RNVC: 2
1100100-130: RNCC: 5 | RNVC: 9
SR11770A: RNCC: 5 | RNVC: 9
SR11824A: RNCC: 5 | RNVC: 9
3040PL1996433: RNCC: 6 | RNVC: 9

14 Jun 1980

3040-01-096-5976
Stylus Arm Pivot

010965976
875-A-521: RNCC: 3 | RNVC: 2

25 Jun 1980

3040-01-097-2088
Brake Disc

010972088
8413-1: RNCC: 3 | RNVC: 2
8413-1: RNCC: 5 | RNVC: 9

7 Jul 1980

3040-01-097-2210
Shouldered Shaft

010972210
GS8406M3-31: RNCC: 3 | RNVC: 2

8 Jul 1980

3040-01-099-2485
Shaft Retaining Plate

010992485
2227069-1: RNCC: 3 | RNVC: 2
2227069-1: RNCC: 5 | RNVC: 1
2227069-1: RNCC: 5 | RNVC: 9

15 Aug 1980

3040-01-104-9152
Manual Control Lever

011049152
12276914: RNCC: 3 | RNVC: 2

13 Dec 1980

3040-01-105-1024
Linear Actuating Cylinder

011051024
AF510: RNCC: 3 | RNVC: 2

17 Dec 1980

3040-01-105-8791
Bell Crank

011058791
12297138: RNCC: 3 | RNVC: 2

7 Jan 1981

3040-01-106-1356
Shaft Retaining Plate

011061356
87791-6101 ITEM 21: RNCC: 3 | RNVC: 2
4775911-0021: RNCC: 5 | RNVC: 2
516-4775911 ITEM 21: RNCC: 5 | RNVC: 2
516-4775911: RNCC: D | RNVC: 9

14 Jan 1981

3040-01-106-8062
Rigid Connecting Link

011068062
12297339: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-105-4026
Hydraulic Accumulator

011054026
12304412: RNCC: 3 | RNVC: 2
3040011054026: RNCC: 6 | RNVC: 9

21 Dec 1980

3040-01-106-8197
Spur Gearshaft

011068197
12295273: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-107-3388
Rigid Connecting Link

011073388
12294965: RNCC: 3 | RNVC: 2
12294965: RNCC: 5 | RNVC: 2
10395326: RNCC: 6 | RNVC: 9

4 Feb 1981

3040-01-108-1093
Rotating Shaft Eye Bracket

011081093
12269090: RNCC: 3 | RNVC: 2
3040011081093: RNCC: 5 | RNVC: 9
3040011081093: RNCC: 6 | RNVC: 9

21 Feb 1981

3040-01-108-1238
Straight Shaft

011081238
RE-B102130: RNCC: 3 | RNVC: 2
ASC1538974: RNCC: 5 | RNVC: 9

21 Feb 1981

3040-01-107-9589
Spur Gearshaft

011079589
23510825: RNCC: 3 | RNVC: 2
23510825: RNCC: 3 | RNVC: 9
23510815: RNCC: 5 | RNVC: 9

18 Feb 1981

3040-01-108-2657
Shouldered Shaft

011082657
176C1665: RNCC: 3 | RNVC: 2

24 Feb 1981

3040-01-108-7031
Shouldered Shaft

011087031
01-435-0157-5 PIECE 211: RNCC: 3 | RNVC: 2
60-305-0004-2: RNCC: 5 | RNVC: 2
60305-0004 PIECE 211: RNCC: 5 | RNVC: 2
01-435-0157-5 PIECE 211: RNCC: 5 | RNVC: 9
60-305-0004-2: RNCC: 5 | RNVC: 9

4 Mar 1981

3040-01-108-5340
Pawl

011085340
12299105: RNCC: 3 | RNVC: 2
12299105: RNCC: 5 | RNVC: 2
10085840: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-109-9123
Straight Shaft

011099123
12293427: RNCC: 3 | RNVC: 2
12293427: RNCC: 5 | RNVC: 1
12293427: RNCC: 5 | RNVC: 1
12293427: RNCC: 5 | RNVC: 9

24 Mar 1981

3040-01-110-4403
Shouldered Shaft

011104403
12292338: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-112-1092
Push-Pull Control Assembly

011121092
1J3304: RNCC: 3 | RNVC: 2
876-609-3-108: RNCC: 5 | RNVC: 2
4058-075-0275 AND 3006000-001: RNCC: 5 | RNVC: 2
D301846-3-108: RNCC: 5 | RNVC: 9
D301846-3-108: RNCC: 5 | RNVC: 9
876-609-3-108: RNCC: 5 | RNVC: 9
57-3346-2171: RNCC: 5 | RNVC: 9
1J3304-A: RNCC: D | RNVC: 9

26 Apr 1981

3040-01-109-4776
Rigid Connecting Link

011094776
12292425: RNCC: 3 | RNVC: 2

15 Mar 1981

3040-01-113-7560
Rigid Connecting Link

011137560
2600645: RNCC: 3 | RNVC: 2

3 Jun 1981

3040-01-111-1188
Differential Spider

011111188
2862608: RNCC: 3 | RNVC: 2

11 Apr 1981

3040-01-114-4600
Control Cam

011144600
2640-809X24 ITEM 27: RNCC: 3 | RNVC: 2
845-4687577 ITEM 38: RNCC: 5 | RNVC: 2
2640-809-24 ITE: RNCC: C | RNVC: 1
845-4687577: RNCC: D | RNVC: 9
2640-809X24: RNCC: D | RNVC: 9

17 Jun 1981

3040-01-114-7725
Straight Shaft

011147725
12299205: RNCC: 3 | RNVC: 2
10085857: RNCC: 6 | RNVC: 9

22 Jun 1981

3040-01-114-8584
Breather

011148584
3862075-1: RNCC: 3 | RNVC: 2
10159283: RNCC: 6 | RNVC: 9

24 Jun 1981

3040-01-114-4296
External Shaft

011144296
61417: RNCC: 3 | RNVC: 2

17 Jun 1981

3040-01-114-8426
Rotating Shaft Eye Bracket

011148426
641-3549-001: RNCC: 3 | RNVC: 2
641-3549-001: RNCC: 5 | RNVC: 2
10106761: RNCC: 6 | RNVC: 9

24 Jun 1981

3040-01-115-3491
Head Clamp

011153491
2642-693-02 ITEM 13: RNCC: 3 | RNVC: 2
845-4687549 ITEM 13: RNCC: 5 | RNVC: 2
2642-693-02 ITEM 13: RNCC: 5 | RNVC: 9
2642-693-02: RNCC: D | RNVC: 9
845-4687549: RNCC: D | RNVC: 9

3 Jul 1981

3040-01-116-1309
Straight Shaft

011161309
176C1473: RNCC: 3 | RNVC: 2
10106769: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-116-1457
Shouldered Shaft

011161457
167C2171: RNCC: 3 | RNVC: 2
10106772: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-117-6899
Counterbalance Weight

011176899
3556943-6: RNCC: 3 | RNVC: 2

20 Aug 1981

3040-01-118-7578
Bevel Gearshaft

011187578
384754: RNCC: 3 | RNVC: 2

11 Sep 1981

3040-01-119-0606
Shouldered Shaft

011190606
3167427-2: RNCC: 3 | RNVC: 2
3167427-2: RNCC: 5 | RNVC: 9
10106787: RNCC: 6 | RNVC: 9
3167427: RNCC: D | RNVC: 9

16 Sep 1981

3040-01-119-7407
Rigid Connecting Link

011197407
145H7327-1: RNCC: 3 | RNVC: 2

2 Oct 1981

3040-01-120-5487
Shouldered Shaft

011205487
603226-62-A: RNCC: 3 | RNVC: 2
603226-62-A: RNCC: 3 | RNVC: 9

21 Oct 1981

3040-01-121-4912
Rigid Connecting Link

011214912
14-50759-7: RNCC: 3 | RNVC: 2
14-50759-7: RNCC: 3 | RNVC: 9
14-50759-7: RNCC: 5 | RNVC: 9
1652-3: RNCC: 5 | RNVC: 9
14-50759-7: RNCC: 5 | RNVC: 9

5 Nov 1981

3040-01-121-9698
Gearshaft

011219698
147582-1: RNCC: 3 | RNVC: 2
147582-1: RNCC: 5 | RNVC: 2
147582-1: RNCC: 5 | RNVC: 9

11 Nov 1981

3040-01-122-3401
Manual Control Lever

011223401
20476-421: RNCC: 3 | RNVC: 2
20476-420: RNCC: 5 | RNVC: 2
20481-002 FIND 17: RNCC: 5 | RNVC: 9
20481-002: RNCC: D | RNVC: 9

19 Nov 1981

3040-01-123-0981
Shouldered Shaft

011230981
112887-1: RNCC: 3 | RNVC: 2
112887-1: RNCC: 5 | RNVC: 9

5 Dec 1981

3040-01-123-2228
Counterbalance Weight

011232228
579-1047-02: RNCC: 3 | RNVC: 2
10163650: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-123-6234
Shaft Collar

011236234
13218E4060: RNCC: 3 | RNVC: 2

16 Dec 1981

3040-01-124-0338
Shaft Retaining Plate

011240338
2585719: RNCC: 3 | RNVC: 2
2585719: RNCC: 5 | RNVC: 2
2585719: RNCC: 5 | RNVC: 2

27 Dec 1981

3040-01-124-6531
Straight Shaft

011246531
70400-02155-103: RNCC: 3 | RNVC: 2
70400-02155-102: RNCC: E | RNVC: 8

9 Jan 1982

3040-01-125-2903
Brake Pulleys Shaft

011252903
74A640009-2004: RNCC: 3 | RNVC: 2
74A640009-2004: RNCC: 5 | RNVC: 2

25 Jan 1982

3040-01-125-3018
Control Cam

011253018
74A350741-2002: RNCC: 3 | RNVC: 2
10106811: RNCC: 6 | RNVC: 9

25 Jan 1982

3040-01-125-7329
Spur Gearshaft

011257329
65391-11709-104: RNCC: 3 | RNVC: 2
65391-11709-102: RNCC: 5 | RNVC: 9
65391-11709-103: RNCC: 5 | RNVC: 9

1 Feb 1982

3040-01-125-8012
Control Cam

011258012
7605-0037-01: RNCC: 3 | RNVC: 2
10106816: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-8211
Rigid Connecting Link

011258211
6513-9: RNCC: 3 | RNVC: 2
10106820: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-8364
Shouldered Shaft

011258364
64361-04008-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-126-1595
Rigid Connecting Link

011261595
167C2196: RNCC: 3 | RNVC: 2
10106832: RNCC: 6 | RNVC: 9

6 Feb 1982

3040-01-128-1516
Rigid Connecting Link

011281516
74A640018-1001: RNCC: 3 | RNVC: 2
10106835: RNCC: 6 | RNVC: 9
74A640018: RNCC: D | RNVC: 9

18 Mar 1982

3040-01-127-4757
Spur Gearshaft

011274757
27683: RNCC: 3 | RNVC: 2

2 Mar 1982

3040-01-128-4412
Spline Adapter

011284412
1594557-1: RNCC: 3 | RNVC: 2
93-31300-02: RNCC: 5 | RNVC: 2
1584000-1: RNCC: 5 | RNVC: 9
1584000-1: RNCC: 5 | RNVC: 9
1594557-1: RNCC: 5 | RNVC: 9

21 Mar 1982

3040-01-128-4668
Spur Gearshaft

011284668
2040923-1: RNCC: 3 | RNVC: 2
2040923-1: RNCC: 5 | RNVC: 9
10106846: RNCC: 6 | RNVC: 9
2040923: RNCC: D | RNVC: 9

21 Mar 1982

3040-01-128-5716
Mechanical Drive Housing

011285716
12288133: RNCC: 3 | RNVC: 2

25 Mar 1982

3040-01-129-5819
Shaft

011295819
5N1883: RNCC: 3 | RNVC: 2
5L1650: RNCC: 5 | RNVC: 9

8 Apr 1982

3040-01-090-0616
Rigid Connecting Link

010900616
3529-5: RNCC: 3 | RNVC: 2
160C611501-5: RNCC: 7 | RNVC: 9
160C611501-5: RNCC: C | RNVC: 1

11 Feb 1980

3040-01-112-4919
Pawl

011124919
503951: RNCC: 3 | RNVC: 2
503951: RNCC: 5 | RNVC: 9

6 May 1981

3040-01-110-5031
Brake Disc

011105031
3706-2: RNCC: 3 | RNVC: 2
3706-2: RNCC: 5 | RNVC: 2

2 Apr 1981

3040-01-113-3783
Mechanical Drive Housing

011133783
12292402: RNCC: 3 | RNVC: 2

21 May 1981

3040-01-111-0159
Shouldered Shaft

011110159
3164038-2: RNCC: 3 | RNVC: 2
3164038-2: RNCC: 5 | RNVC: 9

9 Apr 1981

3040-01-113-9901
Extension Shaft

011139901
384-1099-00: RNCC: 3 | RNVC: 2
384-1099-00: RNCC: 3 | RNVC: 9

7 Jun 1981

3040-01-125-8927
Rigid Connecting Link

011258927
MBEU-65528: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-9922
Rigid Connecting Link

011259922
XA-39: RNCC: 3 | RNVC: 2
XA-39: RNCC: 5 | RNVC: 2
2AH747: RNCC: 5 | RNVC: 2
MA207-23111: RNCC: 5 | RNVC: 2
XA-39: RNCC: 5 | RNVC: 2
2AH747: RNCC: 5 | RNVC: 9
39: RNCC: 5 | RNVC: 9

5 Feb 1982

3040-01-059-6877
Square Drve Adapter

010596877
16A2300-21: RNCC: 3 | RNVC: 2
16A2300-21: RNCC: 5 | RNVC: 9

15 Apr 1978

3040-01-059-6483
Uplock Shaft

010596483
162D637071-2001: RNCC: 3 | RNVC: 2
162D637071-2001: RNCC: 5 | RNVC: 2
160D637071-11: RNCC: 5 | RNVC: 9
160D637071-11: RNCC: C | RNVC: 1

14 Apr 1978

3040-01-060-0086
Flexible Casing Coupling Nut

010600086
757578-2: RNCC: 3 | RNVC: 2
T15-125A: RNCC: 5 | RNVC: 2
T15-125AZ: RNCC: 5 | RNVC: 9

4 May 1978

3040-01-060-6951
Body Hub

010606951
2009090-1: RNCC: 3 | RNVC: 2

27 May 1978

3040-01-060-8876
Rigid Connecting Link

010608876
4050494: RNCC: 3 | RNVC: 2
4050494: RNCC: 3 | RNVC: 9
4050494: RNCC: 5 | RNVC: 2
4050494: RNCC: 5 | RNVC: 2
4050494: RNCC: 5 | RNVC: 9
4050494: RNCC: 5 | RNVC: 9
3040PL0665956: RNCC: 6 | RNVC: 9

4 Jun 1978

3040-01-065-4952
Bevel Gearshaft

010654952
69-4194: RNCC: 3 | RNVC: 2
69-4194: RNCC: 5 | RNVC: 9

20 Sep 1978

3040-01-067-8143
Piston Assembly

010678143
A2V2: RNCC: 3 | RNVC: 2
S4824-3237185PC37: RNCC: 5 | RNVC: 2
29737PC37: RNCC: 5 | RNVC: 2
29737PC37: RNCC: 5 | RNVC: 9
S4824-3237185: RNCC: D | RNVC: 9
29737: RNCC: D | RNVC: 9

8 Nov 1978

3040-01-068-2863
Speedometer-Tachometer Drive Adapter

010682863
A34266: RNCC: 3 | RNVC: 2

19 Nov 1978

3040-01-068-7647
Brake Plate

010687647
54725: RNCC: 3 | RNVC: 2
72180: RNCC: 3 | RNVC: 2
S113937: RNCC: 5 | RNVC: 9
50461: RNCC: 5 | RNVC: 9
S93711: RNCC: 5 | RNVC: 9
72180: RNCC: 5 | RNVC: 9
50461: RNCC: C | RNVC: 1

1 Dec 1978

3040-01-069-9351
Ball Joint

010699351
1582: RNCC: 3 | RNVC: 2

29 Dec 1978

3040-01-070-7369
Rigid Connecting Link

010707369
16K0571-845: RNCC: 3 | RNVC: 2
16K0571-845: RNCC: 5 | RNVC: 2
3040PL0666019: RNCC: 6 | RNVC: 9

18 Jan 1979

3040-01-071-8282
Cylinder Actuating Linear Guide

010718282
709-4684897 ITEM 8: RNCC: 3 | RNVC: 2
87832-1626PC8: RNCC: 5 | RNVC: 2
87832-1626-8: RNCC: 5 | RNVC: 9
709-4684897: RNCC: D | RNVC: 9
87832-1626: RNCC: D | RNVC: 9

15 Feb 1979

3040-01-073-1185
Shouldered Shaft

010731185
11579108: RNCC: 3 | RNVC: 2

9 Mar 1979

3040-01-073-9719
Control Cam

010739719
12285494: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-074-8346
Shouldered Shaft

010748346
12288041: RNCC: 3 | RNVC: 2
DAX12651: RNCC: 5 | RNVC: 2
12267438: RNCC: 5 | RNVC: 9

8 Apr 1979

3040-01-074-7721
Counterbalance Weight

010747721
387384CL8: RNCC: 3 | RNVC: 2

6 Apr 1979

3040-01-074-9987
Rigid Connecting Link

010749987
212-001-052-101: RNCC: 3 | RNVC: 2
212-001-052-101: RNCC: 5 | RNVC: 2
212-001-052: RNCC: D | RNVC: 9

11 Apr 1979

3040-01-076-6906
Linear Actuating Cylinder Piston

010766906
12283219: RNCC: 3 | RNVC: 2

9 May 1979

3040-01-077-6087
Spur Gearshaft

010776087
1854981: RNCC: 3 | RNVC: 2

26 May 1979

3040-01-078-3694
Bevel Gearshaft

010783694
6793016: RNCC: 3 | RNVC: 2
650AS174-14: RNCC: 5 | RNVC: 2
6793016: RNCC: 5 | RNVC: 9
650AS174: RNCC: D | RNVC: 9

11 Jun 1979

3040-01-079-1292
Rigid Connecting Link

010791292
2-23-13321: RNCC: 3 | RNVC: 2
10168200235: RNCC: 5 | RNVC: 2

27 Jun 1979

3040-01-078-9180
Rigid Connecting Link

010789180
68B618000-293: RNCC: 3 | RNVC: 2
4500-293: RNCC: 3 | RNVC: 2

21 Jun 1979

3040-01-081-5252
Linear Actuating Cylinder Assembly

010815252
G101274: RNCC: 3 | RNVC: 2
C3238: RNCC: 3 | RNVC: 2

15 Aug 1979

3040-01-083-0511
Shouldered Shaft

010830511
1587269-2: RNCC: 3 | RNVC: 2
1587269-2: RNCC: 5 | RNVC: 9
1587269-2: RNCC: C | RNVC: 1

14 Sep 1979

3040-01-083-5414
Mechanical Drive Housing

010835414
10920689: RNCC: 3 | RNVC: 2

26 Sep 1979

3040-01-084-2807
Linear Actuating Cylinder Head

010842807
4685194A-0017: RNCC: 3 | RNVC: 2
704-4685193 ITEM 18: RNCC: 5 | RNVC: 2
87861-1507PC17: RNCC: 5 | RNVC: 9
4685194-0017: RNCC: 5 | RNVC: 9
704-4685193: RNCC: D | RNVC: 9

14 Oct 1979

3040-01-085-5178
Bell Crank

010855178
70400-02502-044: RNCC: 3 | RNVC: 2
70400-02502-044: RNCC: 5 | RNVC: 2
70400-02502: RNCC: D | RNVC: 9

9 Nov 1979

3040-01-086-0817
Remote Control Lever

010860817
70400-01614-044: RNCC: 3 | RNVC: 2
3040PL1940158: RNCC: 6 | RNVC: 9
70400-01614: RNCC: D | RNVC: 9

20 Nov 1979

3040-01-087-4405
Rigid Connecting Link

010874405
70400-01609-046: RNCC: 3 | RNVC: 2
70400-01609-046: RNCC: 5 | RNVC: 2
70400-01609-046: RNCC: 5 | RNVC: 2

17 Dec 1979

3040-01-088-1925
Shouldered Shaft

010881925
421339: RNCC: 3 | RNVC: 2

8 Jan 1980

3040-01-088-5903
Rigid Connecting Link

010885903
11684303: RNCC: 3 | RNVC: 2

16 Jan 1980

3040-01-089-7790
Shouldered Shaft

010897790
12524303: RNCC: 3 | RNVC: 2
465-4303: RNCC: 5 | RNVC: 2
2 0040-089: RNCC: 5 | RNVC: 2
2 0040-089: RNCC: 5 | RNVC: 9
465-4303: RNCC: 5 | RNVC: 9
10126871: RNCC: 6 | RNVC: 9
3040PL1037715: RNCC: 6 | RNVC: 9
465-4303: RNCC: C | RNVC: 1

7 Feb 1980

3040-01-091-3841
Rigid Connecting Link

010913841
70400-02252-120: RNCC: 3 | RNVC: 2
SR11719A: RNCC: 3 | RNVC: 9
2005-1: RNCC: 5 | RNVC: 2
1100070-120: RNCC: 5 | RNVC: 9
2005-Y120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
SR11719A: RNCC: 5 | RNVC: 9

7 Mar 1980

3040-01-092-4401
Valve Shaft

010924401
9183: RNCC: 3 | RNVC: 9
6304-14-2 ITEM 4: RNCC: 5 | RNVC: 9
9183: RNCC: C | RNVC: 1
6304-14-2 ITEM 4: RNCC: C | RNVC: 1

26 Mar 1980

3040-01-093-6486
Manual Control Lever

010936486
19-97-0151: RNCC: 3 | RNVC: 2
845-4558738 ITEM 65: RNCC: 5 | RNVC: 2
2641-809-40 ASSEMBLY B: RNCC: 5 | RNVC: 2
845-4558738: RNCC: D | RNVC: 9

20 Apr 1980

3040-01-093-8922
Shaft Collar

010938922
11727834: RNCC: 3 | RNVC: 2

26 Apr 1980

3040-01-094-6154
Straight Shaft

010946154
1231-196-1: RNCC: 3 | RNVC: 2
1231-196-1: RNCC: C | RNVC: 1

13 May 1980

3040-01-094-8456
Shouldered Shaft

010948456
737913-2: RNCC: 3 | RNVC: 2

17 May 1980

3040-01-095-2312
Shouldered Shaft

010952312
12292463: RNCC: 3 | RNVC: 2

25 May 1980

3040-01-095-2969
Rigid Connecting Link

010952969
3003T57P01: RNCC: 3 | RNVC: 2

28 May 1980

3040-01-095-6074
Push-Pull Control Assembly

010956074
5211-1: RNCC: 3 | RNVC: 2
9D7928: RNCC: 3 | RNVC: 2
5211-1: RNCC: 5 | RNVC: 2

4 Jun 1980

3040-01-095-7541
Shouldered Shaft

010957541
70105-08003-103: RNCC: 3 | RNVC: 2
70150-08003-102: RNCC: 5 | RNVC: 9

5 Jun 1980

3040-01-097-6145
Shaft Stop

010976145
621-2506-001: RNCC: 3 | RNVC: 2

16 Jul 1980

3040-01-098-1862
Push-Pull Control Assembly

010981862
990-06-537: RNCC: 3 | RNVC: 2
10252754-4: RNCC: 3 | RNVC: 2
10252754: RNCC: D | RNVC: 9

26 Jul 1980

3040-01-098-3050
Shouldered Shaft

010983050
621-2493-001: RNCC: 3 | RNVC: 2
621-2493: RNCC: D | RNVC: 9

30 Jul 1980

3040-01-098-8349
Shouldered Shaft

010988349
43706: RNCC: 3 | RNVC: 2

8 Aug 1980

3040-01-100-3017
Rigid Connecting Link

011003017
65652-11227-082: RNCC: 3 | RNVC: 2
65652-11227-082: RNCC: 5 | RNVC: 2
65652-11227-082: RNCC: 5 | RNVC: 9

1 Sep 1980

3040-01-099-9335
Nonrotating Shaft Eye Bracket

010999335
16102088: RNCC: 3 | RNVC: 2
16102088: RNCC: 3 | RNVC: 9
16403147 ITEM 42: RNCC: 5 | RNVC: 9

27 Aug 1980

3040-01-101-9501
Extension Shaft

011019501
071695-0001: RNCC: 3 | RNVC: 2
071695: RNCC: D | RNVC: 9

9 Oct 1980

3040-01-102-3563
Remote Control Lever

011023563
12284999-3: RNCC: 3 | RNVC: 2

18 Oct 1980

3040-01-103-1050
Rigid Connecting Link

011031050
948646-101: RNCC: 3 | RNVC: 2
948646-101A: RNCC: 5 | RNVC: 9

9 Nov 1980

3040-01-103-8062
Shouldered Shaft

011038062
2642-343-03 ITEM 8: RNCC: 3 | RNVC: 2
88-D-329: RNCC: 5 | RNVC: 2
845-4558718 ITEM 8: RNCC: 5 | RNVC: 9
845-4558718: RNCC: D | RNVC: 9
2642-343-03: RNCC: D | RNVC: 9

20 Nov 1980

3040-01-106-0833
Breather

011060833
BV-2: RNCC: 3 | RNVC: 2
BV2-1/4IN: RNCC: C | RNVC: 1

11 Jan 1981

3040-01-105-6597
Remote Control Lever

011056597
12298320: RNCC: 3 | RNVC: 2

1 Jan 1981

3040-01-106-7812
Nonrotating Shaft Eye Bracket

011067812
12293100-2: RNCC: 3 | RNVC: 2
12293100: RNCC: D | RNVC: 9

25 Jan 1981

3040-01-107-2154
Nonvehicular Propeller Shaft

011072154
117-62NYSM-28-9: RNCC: 3 | RNVC: 2
L33739: RNCC: 5 | RNVC: 9
62NYSM28-9: RNCC: 5 | RNVC: 9

31 Jan 1981

3040-01-107-3837
Spur Gearshaft

011073837
142D5485: RNCC: 3 | RNVC: 2

4 Feb 1981

3040-01-107-9198
Ball Joint

011079198
TF-4Y: RNCC: 3 | RNVC: 2
CW-4S: RNCC: 3 | RNVC: 2
402908: RNCC: 3 | RNVC: 2
402908: RNCC: 5 | RNVC: 2
TF-4Y: RNCC: 5 | RNVC: 9

15 Feb 1981

3040-01-108-2162
Rigid Connecting Link

011082162
65400-00111-087: RNCC: 3 | RNVC: 2

23 Feb 1981

3040-01-108-3553
Shouldered Shaft

011083553
5910-383: RNCC: 3 | RNVC: 2

26 Feb 1981

3040-01-108-5338
Remote Control Lever

011085338
12299106: RNCC: 3 | RNVC: 2
12299106: RNCC: 5 | RNVC: 2
10085838: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-9558
Linear Actuating Cylinder

011089558
4710.721.4.1: RNCC: 3 | RNVC: 2
4710.721.4C1: RNCC: 5 | RNVC: 2
0501-6 PIECE 13: RNCC: 5 | RNVC: 2

8 Mar 1981

3040-01-108-5348
Shouldered Shaft

011085348
12299388: RNCC: 3 | RNVC: 2
1229388: RNCC: 5 | RNVC: 9
10085846: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-109-4588
Shouldered Shaft

011094588
11629360: RNCC: 3 | RNVC: 2
10388408: RNCC: 6 | RNVC: 9

15 Mar 1981

3040-01-109-7326
Link

011097326
549AS151: RNCC: 3 | RNVC: 2
549AS151: RNCC: 5 | RNVC: 2
549AS151: RNCC: 5 | RNVC: 2
549AS151: RNCC: 5 | RNVC: 2
549AS151: RNCC: 5 | RNVC: 2

20 Mar 1981

3040-01-110-1209
Shouldered Shaft

011101209
305416000: RNCC: 3 | RNVC: 2
01-110-1209: RNCC: 5 | RNVC: 2
53-102: RNCC: 5 | RNVC: 2
196967: RNCC: 5 | RNVC: 9
3054160: RNCC: 5 | RNVC: 9
GPA-0019: RNCC: 5 | RNVC: 9

26 Mar 1981

3040-01-109-6869
Flexible Drive Shaft

011096869
12288442: RNCC: 3 | RNVC: 2
304001096869: RNCC: 6 | RNVC: 9

19 Mar 1981

3040-01-110-4311
Remote Control Lever

011104311
12297023-1: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-110-4312
Remote Control Lever

011104312
12296738: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-110-4662
Rigid Connecting Link

011104662
12299091: RNCC: 3 | RNVC: 2
10085851: RNCC: 6 | RNVC: 9

1 Apr 1981

3040-01-109-6646
Flexible Shaft Assembly

011096646
SM-C-807622: RNCC: 3 | RNVC: 2
330622-1: RNCC: 5 | RNVC: 2

19 Mar 1981

3040-01-109-6363
Shaft Retaining Plate

011096363
28923: RNCC: 3 | RNVC: 2
895-28365 ITEM 11: RNCC: 5 | RNVC: 2
895-28365: RNCC: D | RNVC: 9

19 Mar 1981

3040-01-111-0971
Rigid Connecting Link

011110971
3365693-1: RNCC: 3 | RNVC: 2
3365693-1: RNCC: 5 | RNVC: 2
3365693-1: RNCC: 5 | RNVC: 2
3365693: RNCC: D | RNVC: 9

10 Apr 1981

3040-01-112-1665
Rigid Connecting Link

011121665
12295646: RNCC: 3 | RNVC: 2

28 Apr 1981

3040-01-113-2517
Flexible Drive Shaft

011132517
5101294: RNCC: 3 | RNVC: 2
5145552: RNCC: 5 | RNVC: 9
5145551: RNCC: C | RNVC: 1

19 May 1981

3040-01-114-6670
Control Cam

011146670
845-4687577 ITEM 39: RNCC: 3 | RNVC: 2
264080924A-0026: RNCC: 5 | RNVC: 2
2640-809X24 ITEM 26: RNCC: 5 | RNVC: 9
845-4687577: RNCC: D | RNVC: 9
2640-809X24: RNCC: D | RNVC: 9

20 Jun 1981

3040-01-114-7719
Rigid Connecting Link

011147719
12300436: RNCC: 3 | RNVC: 2
10085854: RNCC: 6 | RNVC: 9

22 Jun 1981

3040-01-114-6859
Friction Lining

011146859
504412: RNCC: 3 | RNVC: 2
504412: RNCC: 5 | RNVC: 9

21 Jun 1981

3040-01-115-0642
Shaft Retaining Plate

011150642
569479: RNCC: 3 | RNVC: 2

27 Jun 1981

3040-01-114-9458
Spur Gearshaft

011149458
35-79501-3010-4: RNCC: 3 | RNVC: 2

25 Jun 1981

3040-01-115-8279
Shouldered Shaft

011158279
3882319-2: RNCC: 3 | RNVC: 2
3882319: RNCC: D | RNVC: 9

15 Jul 1981

3040-01-115-9596
Rigid Connecting Link

011159596
70400-01250-054: RNCC: 3 | RNVC: 2
2024-1: RNCC: 5 | RNVC: 9
1100040-054: RNCC: 5 | RNVC: 9
70400-01250-054: RNCC: 5 | RNVC: 9
70400-01250-054: RNCC: 5 | RNVC: 9
SR10987A: RNCC: 5 | RNVC: 9
3040PL1939422: RNCC: 6 | RNVC: 9
70400-01250-044: RNCC: E | RNVC: 8

17 Jul 1981

3040-01-117-1080
Bell Crank

011171080
145C3317-3: RNCC: 3 | RNVC: 2

9 Aug 1981

3040-01-117-1391
Manual Control Lever

011171391
4570519: RNCC: 3 | RNVC: 2
4570519: RNCC: 5 | RNVC: 2

9 Aug 1981

3040-01-117-1357
Remote Control Lever

011171357
145H7326-4: RNCC: 3 | RNVC: 2
145H7326-4: RNCC: 5 | RNVC: 2

9 Aug 1981

3040-01-117-4119
Rigid Connecting Link

011174119
145C3126-1: RNCC: 3 | RNVC: 2
145C3126-1: RNCC: 5 | RNVC: 2

14 Aug 1981

3040-01-117-5566
Control Cam

011175566
3037-584: RNCC: 3 | RNVC: 2

16 Aug 1981

3040-01-117-6898
Counterbalance Weight

011176898
3556943-5: RNCC: 3 | RNVC: 2
3556943-5: RNCC: C | RNVC: 1

20 Aug 1981

3040-01-117-7357
Rigid Connecting Link

011177357
145C3340-2: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7362
Rigid Connecting Link

011177362
145C3340-11: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-117-7365
Rigid Connecting Link

011177365
145CS360-3: RNCC: 1 | RNVC: 2
1328-3: RNCC: 3 | RNVC: 2
145CS360-3: RNCC: 5 | RNVC: 2
145CS360-3: RNCC: 5 | RNVC: 2
145C3360-1: RNCC: 5 | RNVC: 9
145CS360-5: RNCC: E | RNVC: 8

21 Aug 1981

3040-01-117-8658
Rigid Connecting Link

011178658
5166025: RNCC: 3 | RNVC: 2

23 Aug 1981

3040-01-118-2012
Shouldered Shaft

011182012
22511513: RNCC: 3 | RNVC: 2
22511513: RNCC: 3 | RNVC: 9

29 Aug 1981

3040-01-118-7496
Shaft Collar

011187496
3168726-1: RNCC: 3 | RNVC: 2
3168726-1: RNCC: 5 | RNVC: 9
10106776: RNCC: 6 | RNVC: 9
3168726: RNCC: D | RNVC: 9

10 Sep 1981

3040-01-118-6227
Rigid Connecting Link

011186227
145CS360-1: RNCC: 1 | RNVC: 2
1328-1: RNCC: 3 | RNVC: 2
145CS360-1: RNCC: 5 | RNVC: 2
145CS360: RNCC: D | RNVC: 9

6 Sep 1981

3040-01-121-0895
Valve Shaft

011210895
20428-1680: RNCC: 3 | RNVC: 2
20428-001 REV B FIND 60: RNCC: 5 | RNVC: 9
20428-001: RNCC: D | RNVC: 9

30 Oct 1981

3040-01-121-1615
Shouldered Shaft

011211615
6C50B-1: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-120-8156
Shouldered Shaft

011208156
58313-40163-1: RNCC: 3 | RNVC: 2

23 Oct 1981

3040-01-120-3041
Body Hub

011203041
11682127-1: RNCC: 3 | RNVC: 2
11682127: RNCC: 3 | RNVC: 2
11631808: RNCC: D | RNVC: 9

15 Oct 1981

3040-01-121-7955
Spur Gearshaft

011217955
504614: RNCC: 3 | RNVC: 2
504614: RNCC: 5 | RNVC: 9

8 Nov 1981

3040-01-121-9637
Remote Control Lever

011219637
74228: RNCC: 3 | RNVC: 9
X92041 PIECE-16: RNCC: 5 | RNVC: 9
X92401 PIECE-16: RNCC: C | RNVC: 1

11 Nov 1981

3040-01-122-8334
Rigid Connecting Link

011228334
74A800743-2001: RNCC: 3 | RNVC: 2
74A800743-2001: RNCC: 5 | RNVC: 9
74A800743-2001: RNCC: 5 | RNVC: 9
10106802: RNCC: 6 | RNVC: 9
74A800743: RNCC: D | RNVC: 9

29 Nov 1981

3040-01-123-7781
Shouldered Shaft

011237781
35 79501 2165 3: RNCC: 3 | RNVC: 2

17 Dec 1981

3040-01-124-3863
Accumulator Cap

011243863
2642-693-02 ITEM 2: RNCC: 3 | RNVC: 2
845-4687549 ITEM 2: RNCC: 5 | RNVC: 2
264269302-0002: RNCC: 5 | RNVC: 2
264269302-0002: RNCC: 5 | RNVC: 9
845-4687549: RNCC: D | RNVC: 9

1 Jan 1982

3040-01-125-3017
Control Cam

011253017
74A350741-2001: RNCC: 3 | RNVC: 2
74A350741-2001: RNCC: 5 | RNVC: 2
10106810: RNCC: 6 | RNVC: 9

25 Jan 1982

3040-01-125-5536
Idler Shaft

011255536
1059772: RNCC: 3 | RNVC: 2
8N4959: RNCC: 5 | RNVC: 9

29 Jan 1982

3040-01-123-6840
Bell Crank

011236840
12308332: RNCC: 3 | RNVC: 2

16 Dec 1981

3040-01-125-8360
Shouldered Shaft

011258360
2046392-2: RNCC: 3 | RNVC: 2
2046392-2: RNCC: 5 | RNVC: 2
2046392-2: RNCC: 5 | RNVC: 9
10106823: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-8847
Spur Gearshaft

011258847
64356-04007-101: RNCC: 3 | RNVC: 2
64356-04007-101: RNCC: 5 | RNVC: 2
64356-04007-101: RNCC: 5 | RNVC: 9

1 Feb 1982

3040-01-125-8864
Linear Actuating Cylinder Piston

011258864
74A635615-2001: RNCC: 3 | RNVC: 2
74A635615-2001: RNCC: 5 | RNVC: 2
10106826: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-125-9183
Spur Gearshaft

011259183
65393-04016-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-126-6162
Linear Actuating Cylinder Piston Rod

011266162
65261-08067-101: RNCC: 3 | RNVC: 2

14 Feb 1982

3040-01-126-6034
Landing Gear Main Axle Shaft

011266034
65261-08035-101: RNCC: 3 | RNVC: 2
65261-08035-101: RNCC: 5 | RNVC: 9
65261-08035-101: RNCC: 5 | RNVC: 9

14 Feb 1982

3040-01-126-6236
Rigid Connecting Link

011266236
65122-11257-058: RNCC: 3 | RNVC: 2

14 Feb 1982

3040-01-129-5887
Shaft

011295887
8N3312: RNCC: 3 | RNVC: 2
8N3313: RNCC: C | RNVC: 1

8 Apr 1982

3040-01-060-8899
Shouldered Shaft

010608899
584661-1: RNCC: 3 | RNVC: 2
584661-1: RNCC: 5 | RNVC: 2
584661-1: RNCC: 5 | RNVC: 9

4 Jun 1978

3040-01-061-0802
Cylinder Wiper

010610802
87832-1627 ITEM 16: RNCC: 3 | RNVC: 2
709-4684898 ITE: RNCC: C | RNVC: 1
709-4684898 ITEM 16: RNCC: D | RNVC: 9

11 Jun 1978

3040-01-063-5217
Counterbalance Weight

010635217
579-1006-14: RNCC: 3 | RNVC: 2
10163672: RNCC: 6 | RNVC: 9

8 Aug 1978

3040-01-063-5218
Counterbalance Weight

010635218
579-1006-18: RNCC: 3 | RNVC: 2

8 Aug 1978

3040-01-065-7047
Remote Control Lever

010657047
4674130 ITEM 3: RNCC: 3 | RNVC: 2
28-55-0138 ITEM 3: RNCC: 3 | RNVC: 9
515-4674130 ITEM 3: RNCC: 5 | RNVC: 2
87552-0622 ITEM 3: RNCC: 5 | RNVC: 9
515-4674130: RNCC: D | RNVC: 9
87552-0622: RNCC: D | RNVC: 9

22 Sep 1978

3040-01-066-4240
Straight Shaft

010664240
11625071: RNCC: 3 | RNVC: 2
6880-35: RNCC: 5 | RNVC: 9
6880-105: RNCC: D | RNVC: 9

9 Oct 1978

3040-01-065-5017
Rigid Connecting Link

010655017
4500-291: RNCC: 3 | RNVC: 2
4029-15: RNCC: 5 | RNVC: 9
68B618000-291: RNCC: 7 | RNVC: 2

20 Sep 1978

3040-01-067-5068
Shouldered Shaft

010675068
507311: RNCC: 3 | RNVC: 2
507311: RNCC: 5 | RNVC: 9
507311: RNCC: 5 | RNVC: 9

1 Nov 1978

3040-01-067-9818
Linear Actuating Cylinder

010679818
508325: RNCC: 3 | RNVC: 2
508325: RNCC: 5 | RNVC: 9
508325M: RNCC: 5 | RNVC: 9
508325: RNCC: 5 | RNVC: 9
508235: RNCC: C | RNVC: 1
508125: RNCC: C | RNVC: 1

12 Nov 1978

3040-01-068-0403
Rotating Shaft Eye Bracket

010680403
00563001: RNCC: 3 | RNVC: 2
69398: RNCC: 5 | RNVC: 9

15 Nov 1978

3040-01-069-9123
Control Cam

010699123
68A350728-1007: RNCC: 3 | RNVC: 2
68A350728-1007: RNCC: 5 | RNVC: 2
68A350728-1007: RNCC: 5 | RNVC: 2
68A350728: RNCC: 5 | RNVC: 9
68A350728-1005: RNCC: 5 | RNVC: 9

28 Dec 1978

3040-01-069-2070
Shouldered Shaft

010692070
3146533: RNCC: 3 | RNVC: 2
346013-000: RNCC: 5 | RNVC: 2
346013-000: RNCC: 5 | RNVC: 9
3040PL0840756: RNCC: 6 | RNVC: 9

10 Dec 1978

3040-01-073-7682
Helical Gearshaft

010737682
12284919: RNCC: 3 | RNVC: 2
XM21794: RNCC: 5 | RNVC: 9
12274719: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-076-2616
Counterbalance Weight

010762616
387384CL1: RNCC: 3 | RNVC: 2
387384CL1: RNCC: 5 | RNVC: 2

3 May 1979

3040-01-077-1137
Piston Ring

010771137
8503102: RNCC: 3 | RNVC: 2
5031-2PC: RNCC: 5 | RNVC: 9

18 May 1979

3040-01-077-1547
Shouldered Shaft

010771547
12282114: RNCC: 3 | RNVC: 2

18 May 1979

3040-01-078-1279
Shaft Retaining Plate

010781279
12283222: RNCC: 3 | RNVC: 2

9 Jun 1979

3040-01-078-5434
Spur Gearshaft

010785434
1000598: RNCC: 3 | RNVC: 2

15 Jun 1979

3040-01-079-3469
Shouldered Shaft

010793469
MA280 21 023: RNCC: 3 | RNVC: 2
17741900: RNCC: 3 | RNVC: 2
177419: RNCC: 5 | RNVC: 9

1 Jul 1979

3040-01-079-4796
Remote Control Lever

010794796
12267436: RNCC: 1 | RNVC: 2
23011024: RNCC: 3 | RNVC: 2
23011024: RNCC: 5 | RNVC: 2
DAX12647: RNCC: 5 | RNVC: 9

7 Jul 1979

3040-01-079-3468
Shouldered Shaft

010793468
208119: RNCC: 3 | RNVC: 9

1 Jul 1979

3040-01-083-5650
Spur Gearshaft

010835650
12267992: RNCC: 3 | RNVC: 2

26 Sep 1979

3040-01-083-9114
Shouldered Shaft

010839114
10934255: RNCC: 3 | RNVC: 2

4 Oct 1979

3040-01-084-2791
Linear Actuating Cylinder Gland

010842791
4685194-0007: RNCC: 3 | RNVC: 2
704-4685193 ITEM 8: RNCC: 5 | RNVC: 2
704-4685193: RNCC: D | RNVC: 9

14 Oct 1979

3040-01-088-1924
Shouldered Shaft

010881924
5034T77P01: RNCC: 3 | RNVC: 2

8 Jan 1980

3040-01-088-5014
Remote Control Lever

010885014
432B559 PC.1: RNCC: 3 | RNVC: 9
432B559P1: RNCC: 5 | RNVC: 9
7378E65P31: RNCC: 5 | RNVC: 9
432B559 PC.1: RNCC: 5 | RNVC: 9
432B559-1: RNCC: C | RNVC: 1
432B559 PC.1: RNCC: C | RNVC: 1
432B559 PC.1: RNCC: C | RNVC: 1

15 Jan 1980

3040-01-088-5725
Counterbalance Weight

010885725
1853297-2: RNCC: 3 | RNVC: 2

15 Jan 1980

3040-01-089-3956
Counterbalance Weight

010893956
387384CL3: RNCC: 3 | RNVC: 2

31 Jan 1980

3040-01-092-1694
Piston Ring Set

010921694
7014MR-160-T: RNCC: 3 | RNVC: 2
7014MR-160-T: RNCC: 5 | RNVC: 9

20 Mar 1980

3040-01-091-9089
Shouldered Shaft

010919089
712190: RNCC: 3 | RNVC: 2

15 Mar 1980

3040-01-092-6916
Manual Control Lever

010926916
274061-1: RNCC: 3 | RNVC: 2

31 Mar 1980

3040-01-094-2597
Straight Shaft

010942597
1C6172P24: RNCC: 3 | RNVC: 2
1C6172P24: RNCC: C | RNVC: 1

7 May 1980

3040-01-097-6508
Valve Shaft

010976508
20307-1030: RNCC: 3 | RNVC: 2

17 Jul 1980

3040-01-095-0126
Filler-Breather

010950126
AB1010-6: RNCC: 3 | RNVC: 2
1004909: RNCC: C | RNVC: 1

21 May 1980

3040-01-097-7336
Straight Shaft

010977336
AD34688-1: RNCC: 3 | RNVC: 2

18 Jul 1980

3040-01-097-8429
Shaft End Fitting

010978429
FT455X: RNCC: 3 | RNVC: 2
A2857X: RNCC: 5 | RNVC: 9

19 Jul 1980

3040-01-095-2059
Shouldered Shaft

010952059
5073J144-1: RNCC: 3 | RNVC: 2
5073J144: RNCC: D | RNVC: 9

24 May 1980

3040-01-095-7523
Rigid Connecting Link

010957523
70400-01255-104: RNCC: 1 | RNVC: 2
2020-1: RNCC: 3 | RNVC: 2
70400-01255-104 78286: RNCC: 5 | RNVC: 9
70400-01255-104: RNCC: 5 | RNVC: 9
SR11629A-104: RNCC: 5 | RNVC: 9
3040PL1960193: RNCC: 6 | RNVC: 9

5 Jun 1980

3040-01-098-2495
Bin Adjusting Shaft

010982495
9240-003-49: RNCC: 3 | RNVC: 2

29 Jul 1980

3040-01-098-2414
Roller Shaft

010982414
2661576: RNCC: 3 | RNVC: 2
2661576: RNCC: 5 | RNVC: 9
810-2223301-74: RNCC: C | RNVC: 1
810-2223301-74: RNCC: C | RNVC: 1

29 Jul 1980

3040-01-098-6878
Rigid Connecting Link

010986878
100023-1: RNCC: 3 | RNVC: 2
100023: RNCC: 5 | RNVC: 9

6 Aug 1980

3040-01-098-8282
Worm Shaft

010988282
NAFB3798A: RNCC: 3 | RNVC: 2
NAFB3798A: RNCC: 3 | RNVC: 9
3284035 PIECE 8: RNCC: 5 | RNVC: 2
3284035 PIECE 8: RNCC: 5 | RNVC: 9
CAFB3798A: RNCC: 5 | RNVC: 9
AFB3798A: RNCC: 5 | RNVC: 9
3284035 PIECE 8: RNCC: C | RNVC: 1
3284035: RNCC: D | RNVC: 9
3133151: RNCC: D | RNVC: 9
A1370AFB7C: RNCC: D | RNVC: 9

7 Aug 1980

3040-01-099-4658
Pawl

010994658
0330525: RNCC: 3 | RNVC: 2
330525: RNCC: 5 | RNVC: 2
324755: RNCC: 5 | RNVC: 9
330525: RNCC: 5 | RNVC: 9
0330525: RNCC: 5 | RNVC: 9
324755: RNCC: 5 | RNVC: 9
324755: RNCC: 5 | RNVC: 9
330525: RNCC: 5 | RNVC: 9
0330525: RNCC: 5 | RNVC: 9
0330525: RNCC: 5 | RNVC: 9

20 Aug 1980

3040-01-096-1133
Rigid Connecting Link

010961133
2009-1: RNCC: 3 | RNVC: 2
70400-02252-133: RNCC: 3 | RNVC: 2
1100070-133: RNCC: 5 | RNVC: 9
SR11773A: RNCC: 5 | RNVC: 9
3040PL1960189: RNCC: 6 | RNVC: 9

14 Jun 1980

3040-01-099-4409
Mechanical Drive Housing

010994409
37161901: RNCC: 3 | RNVC: 2
281970: RNCC: 5 | RNVC: 2
281970: RNCC: 5 | RNVC: 9

20 Aug 1980

Load More Results