What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 138 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 138of 575

3040-01-150-2282
Rigid Connecting Link

011502282
M/32-20002: RNCC: 3 | RNVC: 2

1 Apr 1983

3040-01-151-0824
Spur Gearshaft

011510824
726912: RNCC: 3 | RNVC: 2

12 Apr 1983

3040-01-151-0826
Spur Gearshaft

011510826
724773: RNCC: 3 | RNVC: 2
724773: RNCC: 5 | RNVC: 2

12 Apr 1983

3040-01-151-2256
Shouldered Shaft

011512256
2022976-5-2: RNCC: 3 | RNVC: 2
16VM003003-13: RNCC: 5 | RNVC: 2
2022976-5-1: RNCC: 5 | RNVC: 9
2022976-5-1: RNCC: 5 | RNVC: 9
3040PL0667080: RNCC: 6 | RNVC: 9
3040PL1601298: RNCC: 6 | RNVC: 9

14 Apr 1983

3040-01-151-3563
Rigid Connecting Link

011513563
DA078-4: RNCC: 3 | RNVC: 2
12357807: RNCC: 3 | RNVC: 2
2AG881: RNCC: 5 | RNVC: 2
2AG881: RNCC: 5 | RNVC: 9
DA619: RNCC: 5 | RNVC: 9
DA078: RNCC: D | RNVC: 9

16 Apr 1983

3040-01-151-7990
Straight Shaft

011517990
324756-002: RNCC: 3 | RNVC: 2
2BA563: RNCC: 5 | RNVC: 2
2BA563: RNCC: 5 | RNVC: 9
324756-001: RNCC: 5 | RNVC: 9

22 Apr 1983

3040-01-152-7086
Rigid Connecting Link

011527086
65410-00014-074: RNCC: 3 | RNVC: 2

7 May 1983

3040-01-152-6035
Rigid Connecting Link

011526035
65414-03104-045: RNCC: 3 | RNVC: 2

5 May 1983

3040-01-153-1519
Valve Shaft

011531519
NL1609-1: RNCC: 3 | RNVC: 9
NL1609-1: RNCC: 5 | RNVC: 2
NL1609-1: RNCC: 5 | RNVC: 9

13 May 1983

3040-01-153-0995
Ball And Socket

011530995
2496255: RNCC: 3 | RNVC: 2

12 May 1983

3040-01-152-9333
Rigid Connecting Link

011529333
65410-00014-044: RNCC: 3 | RNVC: 2

10 May 1983

3040-01-154-1248
Straight Shaft

011541248
1343690: RNCC: 3 | RNVC: 2
1343690: RNCC: 5 | RNVC: 9

20 May 1983

3040-01-155-4145
Linear Actuating Cylinder

011554145
144EX597: RNCC: 3 | RNVC: 2
032828: RNCC: 5 | RNVC: 2
32828: RNCC: 5 | RNVC: 9
144EX597: RNCC: 5 | RNVC: 9

9 Jun 1983

3040-01-156-4893
Manual Control Lever

011564893
118346: RNCC: 3 | RNVC: 9
2AL564: RNCC: 5 | RNVC: 2
2AL564: RNCC: 5 | RNVC: 9
WM786: RNCC: D | RNVC: 9

21 Jun 1983

3040-01-155-4142
Hinge Shaft

011554142
25790-802: RNCC: 3 | RNVC: 9
MA207-21849: RNCC: 5 | RNVC: 2

9 Jun 1983

3040-01-156-7234
Remote Control Lever

011567234
EE103438: RNCC: 3 | RNVC: 2
EE103438: RNCC: 5 | RNVC: 9

23 Jun 1983

3040-01-157-5173
Rigid Connecting Link

011575173
06409-2: RNCC: 3 | RNVC: 2
MA269A20001: RNCC: 5 | RNVC: 2
MA269-20001: RNCC: 5 | RNVC: 9
06409-2: RNCC: 5 | RNVC: 9

7 Jul 1983

3040-01-157-8453
Shouldered Shaft

011578453
74D291013-2063: RNCC: 3 | RNVC: 2
74D291013-2063: RNCC: 5 | RNVC: 2

13 Jul 1983

3040-01-157-8711
Counterbalance Weight

011578711
4075T14P03: RNCC: 3 | RNVC: 2
10158667: RNCC: 6 | RNVC: 9

13 Jul 1983

3040-01-158-6088
Bell Crank

011586088
70400-02501-046: RNCC: 3 | RNVC: 2

25 Jul 1983

3040-01-158-9472
Shouldered Shaft

011589472
70361-05006-102: RNCC: 3 | RNVC: 2

31 Jul 1983

3040-01-158-9345
Mechanical Drive Housing

011589345
02-23-00121-150: RNCC: 3 | RNVC: 2
2AG606: RNCC: 5 | RNVC: 2
2AG606: RNCC: 5 | RNVC: 9

31 Jul 1983

3040-01-159-4819
Rigid Connecting Link

011594819
4705-3: RNCC: 3 | RNVC: 2
4705-3: RNCC: 5 | RNVC: 2
SR11574A115: RNCC: 5 | RNVC: 9
4705: RNCC: 5 | RNVC: 9
10106956: RNCC: 6 | RNVC: 9
74J668000-115: RNCC: D | RNVC: 9

9 Aug 1983

3040-01-159-6101
Counterbalance Weight

011596101
4057T37P01: RNCC: 3 | RNVC: 2
10159492: RNCC: 6 | RNVC: 9

10 Aug 1983

3040-01-159-9142
Rigid Connecting Link

011599142
4055T96G02: RNCC: 3 | RNVC: 2
10106960: RNCC: 6 | RNVC: 9

14 Aug 1983

3040-01-159-8859
Rigid Connecting Link

011598859
74A733107-2003: RNCC: 3 | RNVC: 2
3930AS547: RNCC: 5 | RNVC: 2
10106957: RNCC: 6 | RNVC: 9
74A733107: RNCC: D | RNVC: 9

14 Aug 1983

3040-01-161-4444
Pawl

011614444
70250-34066-104: RNCC: 3 | RNVC: 2
70250-34066-104: RNCC: 5 | RNVC: 2

5 Sep 1983

3040-01-162-4696
Bell Crank

011624696
200738615: RNCC: 3 | RNVC: 2

18 Sep 1983

3040-01-163-1420
Flexible Drive Shaft

011631420
9989M49P02: RNCC: 1 | RNVC: 2
FAUSG12AX1: RNCC: 3 | RNVC: 2
312-17352-X-00-0: RNCC: 5 | RNVC: 9
312-17352-X-00-0: RNCC: 5 | RNVC: 9
9989M49P02: RNCC: 5 | RNVC: 9

28 Sep 1983

3040-01-163-6343
Counterbalance Weight

011636343
AS44521-040: RNCC: 3 | RNVC: 2
2301010: RNCC: 5 | RNVC: 2
AS44521-040: RNCC: C | RNVC: 1

6 Oct 1983

3040-01-164-3803
Straight Shaft

011643803
236208-101: RNCC: 3 | RNVC: 2

16 Oct 1983

3040-01-164-8425
Rigid Connecting Link

011648425
406-001-022-101: RNCC: 3 | RNVC: 2

21 Oct 1983

3040-01-166-1184
Shaft

011661184
8922967: RNCC: 3 | RNVC: 2
5109771: RNCC: 5 | RNVC: 2
K-8922967: RNCC: 5 | RNVC: 9

8 Nov 1983

3040-01-167-2636
Linear Actuating Cylinder Piston

011672636
CMD-185-4: RNCC: 3 | RNVC: 9

24 Nov 1983

3040-01-169-9607
Manual Control Lever

011699607
13024KA-2: RNCC: 3 | RNVC: 2
2BA675: RNCC: 5 | RNVC: 2
2BA675: RNCC: 5 | RNVC: 9
13024KA-2: RNCC: 5 | RNVC: 9

18 Jan 1984

3040-01-170-7956
Bellcrank Assembly

011707956
123LM40523-601: RNCC: 3 | RNVC: 2
123LM40523-601: RNCC: 5 | RNVC: 9

29 Jan 1984

3040-01-170-9288
Rigid Connecting Link

011709288
2007G28-002: RNCC: 3 | RNVC: 2
2007G28P2: RNCC: 5 | RNVC: 9
2007G28: RNCC: D | RNVC: 9

31 Jan 1984

3040-01-171-6127
Gas Turbine Engine Air Seal

011716127
29509983: RNCC: 3 | RNVC: 2
993641C: RNCC: 5 | RNVC: 2
6834587: RNCC: 5 | RNVC: 9
23011474: RNCC: 5 | RNVC: 9
23011474: RNCC: 5 | RNVC: 9

11 Feb 1984

3040-01-173-0553
Counterbalance Weight

011730553
1591M11P02: RNCC: 3 | RNVC: 2
9921M54P06: RNCC: 5 | RNVC: 9

29 Feb 1984

3040-01-173-4178
Shaft Collar

011734178
8260 13010: RNCC: 3 | RNVC: 2
8260: RNCC: 5 | RNVC: 9
8260 10010: RNCC: 5 | RNVC: 9

5 Mar 1984

3040-01-173-4298
Remote Control Lever

011734298
LE79258A: RNCC: 3 | RNVC: 9
674908C92: RNCC: 5 | RNVC: 2
674908C92: RNCC: 5 | RNVC: 9

5 Mar 1984

3040-01-173-5619
Bell Crank

011735619
9511M22P02: RNCC: 3 | RNVC: 2
9511M22P02: RNCC: 5 | RNVC: 2

7 Mar 1984

3040-01-173-5433
Counterbalance Weight

011735433
9527M79P03: RNCC: 3 | RNVC: 2

7 Mar 1984

3040-01-173-8627
Compressor Arm

011738627
9125M65G03: RNCC: 3 | RNVC: 2
3040PL0832776: RNCC: 6 | RNVC: 9

10 Mar 1984

3040-01-174-6215
Rigid Connecting Link

011746215
4900-5133: RNCC: 3 | RNVC: 2
B889100-133: RNCC: 5 | RNVC: 9
75B618002-133: RNCC: 7 | RNVC: 2
4900: RNCC: D | RNVC: 9

21 Mar 1984

3040-01-175-6158
Control Cam

011756158
2041504-2: RNCC: 3 | RNVC: 2
2041504-2: RNCC: 5 | RNVC: 9

3 Apr 1984

3040-01-176-0295
Shouldered Shaft

011760295
W10359270: RNCC: 3 | RNVC: 2
347364: RNCC: 5 | RNVC: 2
3399506: RNCC: 5 | RNVC: 9
347364: RNCC: 5 | RNVC: 9
PL4377508 PAGE 3 NO 42: RNCC: C | RNVC: 1

6 Apr 1984

3040-01-175-8467
Shouldered Shaft

011758467
104779617: RNCC: 3 | RNVC: 2
104779617: RNCC: 5 | RNVC: 2

5 Apr 1984

3040-01-175-8512
Counterbalance Weight

011758512
AS44521-050: RNCC: 3 | RNVC: 9
2301011: RNCC: 5 | RNVC: 2
AS44521-050: RNCC: C | RNVC: 1

5 Apr 1984

3040-01-177-4523
Shaft Collar

011774523
843544: RNCC: 3 | RNVC: 2

25 Apr 1984

3040-01-178-5536
Mechanical Drive Housing

011785536
11672503: RNCC: 3 | RNVC: 2

7 May 1984

3040-01-179-6112
Shaft Retaining Plate

011796112
P12612063N: RNCC: 3 | RNVC: 9
P12612063: RNCC: 5 | RNVC: 9

19 May 1984

3040-01-179-6143
Straight Shaft

011796143
P400591: RNCC: 3 | RNVC: 2
P400591: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-6133
Shouldered Shaft

011796133
P307984N: RNCC: 3 | RNVC: 2
P307984N: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-8410
Linear Actuating Cylinder Piston

011798410
743564-1: RNCC: 3 | RNVC: 2
743564-1: RNCC: 3 | RNVC: 9

22 May 1984

3040-01-179-8725
Shouldered Shaft

011798725
P12613233N: RNCC: 3 | RNVC: 2
P12613233N: RNCC: 3 | RNVC: 9

22 May 1984

3040-01-179-9296
Spur Gearshaft

011799296
J-16116-15: RNCC: 3 | RNVC: 2
J-16116-15: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-180-0804
Body Hub

011800804
P411901: RNCC: 3 | RNVC: 2
P411901: RNCC: 3 | RNVC: 9
P12615015: RNCC: C | RNVC: 1

24 May 1984

3040-01-182-0971
Flexible Casing Coupling Nut

011820971
11251-C-18B: RNCC: 3 | RNVC: 2
C-162D164AX2B: RNCC: 3 | RNVC: 9
C-162D164AX2: RNCC: 5 | RNVC: 9
PL-11256-F-18: RNCC: 5 | RNVC: 9
C-162D164AX2B: RNCC: C | RNVC: 1

19 Jun 1984

3040-01-182-7357
Bell Crank

011827357
4478-126: RNCC: 3 | RNVC: 2

27 Jun 1984

3040-01-182-7906
Rigid Connecting Link

011827906
1123803C1: RNCC: 3 | RNVC: 9

27 Jun 1984

3040-01-183-0631
Shaft Collar

011830631
MA3455: RNCC: 3 | RNVC: 2

1 Jul 1984

3040-01-183-4213
Spur Gearshaft

011834213
305-116-701-0: RNCC: 3 | RNVC: 2

12 Jan 2012

3040-01-183-8486
Mechanical Drive Housing

011838486
12335144: RNCC: 3 | RNVC: 2

11 Jul 1984

3040-01-185-0752
Rigid Connecting Link

011850752
7514-6045: RNCC: 3 | RNVC: 2
SR10784A-6045: RNCC: 5 | RNVC: 2
7014-117: RNCC: 5 | RNVC: 9
LE162-0002-6045: RNCC: 7 | RNVC: 2

25 Jul 1984

3040-01-185-1668
Shouldered Shaft

011851668
232-37138-3: RNCC: 3 | RNVC: 2

26 Jul 1984

3040-01-185-0750
Rigid Connecting Link

011850750
LE162-0002-7002: RNCC: 3 | RNVC: 2
SR10784A-7002: RNCC: 5 | RNVC: 2
7514-7002: RNCC: 5 | RNVC: 2
7013-11: RNCC: 5 | RNVC: 9

25 Jul 1984

3040-01-185-6480
Spur Gearshaft

011856480
188C1915P1: RNCC: 3 | RNVC: 2
153C5489G2: RNCC: 5 | RNVC: 9

1 Aug 1984

3040-01-132-5812
Shouldered Shaft

011325812
35-79501-2144-3: RNCC: 3 | RNVC: 2
35 79501 2144 3: RNCC: 3 | RNVC: 9
10106888: RNCC: 6 | RNVC: 9

1 Jun 1982

3040-01-176-9444
Linear Actuating Cylinder Piston

011769444
91168-991: RNCC: 3 | RNVC: 9
253 6222-604: RNCC: 5 | RNVC: 2
6353193: RNCC: 5 | RNVC: 2
253 6222-604: RNCC: 5 | RNVC: 2
6353193: RNCC: 5 | RNVC: 9
2536222-604: RNCC: 5 | RNVC: 9
6353193: RNCC: 5 | RNVC: 9
10422957: RNCC: 6 | RNVC: 9

18 Apr 1984

3040-01-129-8480
Bell Crank

011298480
65412-02121-102: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-129-8486
Rigid Connecting Link

011298486
65410-00014-048: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-129-8488
Rigid Connecting Link

011298488
65410-00015-045: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-130-2126
Linear Actuating Cylinder Piston

011302126
134C0059C130A: RNCC: 3 | RNVC: 2

18 Apr 1982

3040-01-130-3375
Nonrotating Shaft Eye Bracket

011303375
9348327: RNCC: 3 | RNVC: 2
3618580012: RNCC: 5 | RNVC: 2

21 Apr 1982

3040-01-131-3287
Pitch Trim Shaft

011313287
77411214-01: RNCC: 3 | RNVC: 2
77411214-01: RNCC: 5 | RNVC: 9
77411214: RNCC: D | RNVC: 9

7 May 1982

3040-01-131-4793
Counterbalance Weight

011314793
4055T35P02: RNCC: 3 | RNVC: 2
10158514: RNCC: 6 | RNVC: 9

11 May 1982

3040-01-131-4791
Counterbalance Weight

011314791
4055T35P04: RNCC: 3 | RNVC: 2
10158512: RNCC: 6 | RNVC: 9

11 May 1982

3040-01-131-6173
Linear Actuating Cylinder Head

011316173
810-4385051-27: RNCC: 3 | RNVC: 2
810-4385051-A-27: RNCC: 5 | RNVC: 2
810-4385051: RNCC: D | RNVC: 9

13 May 1982

3040-01-132-0179
Rigid Connecting Link

011320179
5-97658-1: RNCC: 3 | RNVC: 2

20 May 1982

3040-01-134-3661
Cam Follower Ball Retainer Assembly

011343661
2665905: RNCC: 3 | RNVC: 2

3 Jul 1982

3040-01-134-4730
Remote Control Lever

011344730
69-51381-1: RNCC: 3 | RNVC: 2
69-51381-1: RNCC: 5 | RNVC: 2

3 Jul 1982

3040-01-135-1953
Rigid Connecting Link

011351953
64413-05203-041: RNCC: 3 | RNVC: 2

18 Jul 1982

3040-01-137-1882
Linear Actuating Cylinder Assembly

011371882
H-73269F: RNCC: 3 | RNVC: 2
787AS282-1: RNCC: 3 | RNVC: 2
787AS282: RNCC: 5 | RNVC: 2

22 Aug 1982

3040-01-136-7592
Grease Cap

011367592
21-1: RNCC: 3 | RNVC: 9
21-1: RNCC: 5 | RNVC: 2
79-000196: RNCC: 5 | RNVC: 9

13 Aug 1982

3040-01-137-5519
Counterbalance Weight

011375519
70107-08404-105: RNCC: 3 | RNVC: 2

29 Aug 1982

3040-01-138-0801
Shouldered Shaft

011380801
65652-11221-102: RNCC: 3 | RNVC: 2

6 Sep 1982

3040-01-138-8805
Piston Housing

011388805
035-40836: RNCC: 3 | RNVC: 2
035-40836-Y: RNCC: C | RNVC: 1

22 Sep 1982

3040-01-139-2190
Shouldered Shaft

011392190
132D1907: RNCC: 3 | RNVC: 2
10130534: RNCC: 6 | RNVC: 9

27 Sep 1982

3040-01-139-3538
Rigid Connecting Link

011393538
6512-519: RNCC: 3 | RNVC: 2
74J618011-119: RNCC: 5 | RNVC: 2
74J618011-119: RNCC: 5 | RNVC: 9
SR11393A119: RNCC: 5 | RNVC: 9
SR11393A119: RNCC: 5 | RNVC: 9
10106906: RNCC: 6 | RNVC: 9
SR11393A119: RNCC: C | RNVC: 1

29 Sep 1982

NSN 3040-01-139-2486 011392486 LEVER,REMOTE CONTROL

3040-01-139-2486
Remote Control Lever

011392486
65375-04320-103: RNCC: 3 | RNVC: 2
65375-04320-103: RNCC: 5 | RNVC: 2
65375-04320-103: RNCC: 5 | RNVC: 2

27 Sep 1982

3040-01-139-4487
Rigid Connecting Link

011394487
4674116-0005: RNCC: 3 | RNVC: 2
515 4674116 ITEM 5: RNCC: 5 | RNVC: 2
87552-0608: RNCC: D | RNVC: 9
515 4674116: RNCC: D | RNVC: 9

1 Oct 1982

3040-01-139-7063
Output Drive Shaft

011397063
2497017: RNCC: 3 | RNVC: 2
2497017: RNCC: 5 | RNVC: 2
2493742: RNCC: 5 | RNVC: 9
10159215: RNCC: 6 | RNVC: 9

5 Oct 1982

3040-01-140-0813
Rigid Connecting Link

011400813
87552-0608 ITEM 7: RNCC: 3 | RNVC: 2
515-4674116 ITEM 7: RNCC: 5 | RNVC: 2
4674116-0007: RNCC: 5 | RNVC: 9
515-4674116: RNCC: D | RNVC: 9

7 Oct 1982

3040-01-140-3832
Shouldered Shaft

011403832
3014039-1: RNCC: 3 | RNVC: 2
3014039-1: RNCC: 3 | RNVC: 9
10106917: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-140-3506
Spur Gearshaft

011403506
AM10109: RNCC: 3 | RNVC: 9
AM10109: RNCC: 5 | RNVC: 2
AM9080: RNCC: 5 | RNVC: 9
AM10109: RNCC: 5 | RNVC: 9
10106914: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-143-3385
Counterbalance Weight

011433385
4069T98P10: RNCC: 3 | RNVC: 2

2 Dec 1982

3040-01-144-2690
Shaft

011442690
100903: RNCC: 3 | RNVC: 2

16 Dec 1982

3040-01-144-2934
Optical Element Retainer

011442934
SM-D-967955-2: RNCC: 3 | RNVC: 2

18 Dec 1982

3040-01-144-3070
Linear Actuating Cylinder Piston

011443070
B1400B: RNCC: 3 | RNVC: 2

18 Dec 1982

3040-01-144-4041
Shouldered Shaft

011444041
196B7670: RNCC: 3 | RNVC: 2
10106930: RNCC: 6 | RNVC: 9

20 Dec 1982

3040-01-142-8752
Shouldered Shaft

011428752
6321-0086-01: RNCC: 3 | RNVC: 2
10106925: RNCC: 6 | RNVC: 9

22 Nov 1982

3040-01-144-8187
Piston Ring

011448187
T-560-0379-001: RNCC: 3 | RNVC: 2
105905A: RNCC: 5 | RNVC: 2
105905A: RNCC: 5 | RNVC: 9

30 Dec 1982

3040-01-144-9284
Linear Actuating Cylinder Piston

011449284
20434-1080: RNCC: 3 | RNVC: 2
20434-006: RNCC: D | RNVC: 9

30 Dec 1982

3040-01-145-2527
Shouldered Shaft

011452527
132D1753: RNCC: 3 | RNVC: 2
132D1753: RNCC: 5 | RNVC: 2
10106934: RNCC: 6 | RNVC: 9

8 Jan 1983

3040-01-145-2744
Hydraulic Accumulator

011452744
65126-11220-041: RNCC: 3 | RNVC: 2

8 Jan 1983

3040-01-148-1856
Manual Control Lever

011481856
54679102: RNCC: 3 | RNVC: 2
67609Y: RNCC: 5 | RNVC: 9
38485: RNCC: 5 | RNVC: 9
533513-01: RNCC: 5 | RNVC: 9
54697102: RNCC: 5 | RNVC: 9
5342PL0648427: RNCC: 6 | RNVC: 9

2 Mar 1983

3040-01-148-7378
Bell Crank

011487378
65410-03210-041: RNCC: 3 | RNVC: 2

9 Mar 1983

3040-01-148-7912
Straight Shaft

011487912
2022976-4-2: RNCC: 3 | RNVC: 2
184080-3: RNCC: 5 | RNVC: 2
184080-3: RNCC: 5 | RNVC: 2
2022976-4-1: RNCC: 5 | RNVC: 9
16VM003003-12: RNCC: 7 | RNVC: 2

11 Mar 1983

3040-01-148-6468
Clutch Shaft

011486468
730207: RNCC: 3 | RNVC: 2

8 Mar 1983

3040-01-149-4781
Rigid Connecting Link

011494781
74A410576-1003: RNCC: 3 | RNVC: 2
74A410576-1003: RNCC: 5 | RNVC: 2
74A410576-1003: RNCC: 5 | RNVC: 2
74A410576-1003: RNCC: 5 | RNVC: 2
74A410576-1003: RNCC: 5 | RNVC: 2
74A410576-1003: RNCC: 5 | RNVC: 2
74A410576-1003: RNCC: 5 | RNVC: 2
74A410576-1001: RNCC: 5 | RNVC: 9
74A410576-1003: RNCC: 5 | RNVC: 9
74A410576-1003: RNCC: 5 | RNVC: 9

21 Mar 1983

3040-01-149-6759
Linear Actuating Cylinder Piston

011496759
8678537: RNCC: 3 | RNVC: 2
8678537: RNCC: 5 | RNVC: 9
8626878: RNCC: 5 | RNVC: 9

24 Mar 1983

3040-01-149-8297
Body Hub

011498297
12316786: RNCC: 3 | RNVC: 2

27 Mar 1983

3040-01-149-9834
Rigid Connecting Link

011499834
14-40454-1: RNCC: 3 | RNVC: 9
14-40454-1: RNCC: C | RNVC: 1

28 Mar 1983

3040-01-150-6513
Shouldered Shaft

011506513
74A831185-2003: RNCC: 3 | RNVC: 2
10106939: RNCC: 6 | RNVC: 9

7 Apr 1983

3040-01-151-5633
Straight Shaft

011515633
709-4684922 ITEM 35: RNCC: 3 | RNVC: 2
87832-1651 ITEM 35: RNCC: 3 | RNVC: 2
87832-1651: RNCC: 5 | RNVC: 2
709-6129500 ITE: RNCC: C | RNVC: 1
709-4684922: RNCC: D | RNVC: 9

19 Apr 1983

3040-01-152-0178
Shouldered Shaft

011520178
709-4684909 ITEM 14: RNCC: 3 | RNVC: 2
87832-1638 ITEM 14: RNCC: 3 | RNVC: 2
87832-1638: RNCC: 5 | RNVC: 2
709-4684909: RNCC: D | RNVC: 9

26 Apr 1983

3040-01-152-0523
Rigid Connecting Link

011520523
75A607116-1003: RNCC: 3 | RNVC: 9
75A607116-1003: RNCC: 5 | RNVC: 2

27 Apr 1983

3040-01-153-0730
Extension Shaft

011530730
3929AS812-1: RNCC: 3 | RNVC: 2
74A733565-2007: RNCC: 5 | RNVC: 2
74A733565-2007: RNCC: 5 | RNVC: 9
10117849: RNCC: 6 | RNVC: 9
74A733565-2007: RNCC: C | RNVC: 1

12 May 1983

3040-01-153-2694
Shouldered Shaft

011532694
20474-1050: RNCC: 3 | RNVC: 2
20474-1050-1: RNCC: C | RNVC: 1

14 May 1983

3040-01-154-1189
Rigid Connecting Link

011541189
8329-2: RNCC: 3 | RNVC: 2

20 May 1983

3040-01-154-1255
Override Piston Shaft

011541255
20475-1000: RNCC: 3 | RNVC: 2
20475-002 FIND 21: RNCC: 5 | RNVC: 9
20475-002: RNCC: D | RNVC: 9

20 May 1983

3040-01-154-2688
Shouldered Shaft

011542688
2666968: RNCC: 3 | RNVC: 2
2666968: RNCC: 5 | RNVC: 2
10106948: RNCC: 6 | RNVC: 9

23 May 1983

3040-01-154-3797
Push-Pull Control Assembly

011543797
15330402: RNCC: 3 | RNVC: 2
804AS130-2: RNCC: 5 | RNVC: 2
15330400: RNCC: D | RNVC: 9
804AS130: RNCC: D | RNVC: 9

24 May 1983

3040-01-154-8004
Rigid Connecting Link

011548004
8329-1: RNCC: 3 | RNVC: 2

31 May 1983

3040-01-154-9724
Shaft Collar

011549724
A1395: RNCC: 3 | RNVC: 2
A1395: RNCC: 5 | RNVC: 9

3 Jun 1983

3040-01-154-9787
Remote Control Lever

011549787
5995177: RNCC: 3 | RNVC: 2
5995177-B: RNCC: D | RNVC: 9

3 Jun 1983

3040-01-158-1567
Shouldered Shaft

011581567
74A620042-2005: RNCC: 3 | RNVC: 2
10106955: RNCC: 6 | RNVC: 9
74A620042-2005: RNCC: C | RNVC: 1
74A620042-2003: RNCC: C | RNVC: 1

18 Jul 1983

3040-01-158-6858
Extension Shaft

011586858
20239-1040: RNCC: 3 | RNVC: 2
20239-003 FIND 8: RNCC: 5 | RNVC: 9
20239-003: RNCC: D | RNVC: 9

27 Jul 1983

3040-01-159-4339
Worm Shaft

011594339
736663: RNCC: 3 | RNVC: 2

8 Aug 1983

3040-01-159-7146
Control Cam

011597146
XA-1705: RNCC: 3 | RNVC: 2
XA-1705: RNCC: 5 | RNVC: 2
2AE420: RNCC: 5 | RNVC: 2
XA-1705: RNCC: 5 | RNVC: 2
1705: RNCC: 5 | RNVC: 9
2AE420: RNCC: 5 | RNVC: 9
XA-3601-A-SM: RNCC: D | RNVC: 9

13 Aug 1983

3040-01-159-7720
Shaft Collar

011597720
CSC75: RNCC: 3 | RNVC: 2
15022: RNCC: 5 | RNVC: 2
772518-11: RNCC: 5 | RNVC: 2
CL12F: RNCC: 5 | RNVC: 2
02331-0624: RNCC: 5 | RNVC: 9
02331-0624: RNCC: C | RNVC: 1

13 Aug 1983

3040-01-160-1131
Straight Shaft

011601131
2022976-2-2: RNCC: 3 | RNVC: 2
2022976-2-1: RNCC: 5 | RNVC: 9
3040PL1815673: RNCC: 6 | RNVC: 9
3040PL0667081: RNCC: 6 | RNVC: 9
16VM003003-10: RNCC: 7 | RNVC: 2

17 Aug 1983

3040-01-160-4821
Extension Gea Shaft

011604821
1853846-5: RNCC: 3 | RNVC: 2

23 Aug 1983

3040-01-160-5809
Shouldered Shaft

011605809
4678499: RNCC: 3 | RNVC: 2
87713-0304 ITEM 28: RNCC: 5 | RNVC: 2
4678499-0028: RNCC: 5 | RNVC: 2
203-4678499 ITE: RNCC: C | RNVC: 1
MIL-S-24093 CLC: RNCC: C | RNVC: 1
87713-0304: RNCC: D | RNVC: 9

24 Aug 1983

3040-01-160-9585
Shaft Retaining Plate

011609585
6839647: RNCC: 3 | RNVC: 2

31 Aug 1983

3040-01-161-4445
Pawl

011614445
70250-34066-105: RNCC: 3 | RNVC: 2
70250-34066-105: RNCC: 5 | RNVC: 2

5 Sep 1983

3040-01-163-6067
Counterbalance Weight

011636067
579-1006-30: RNCC: 3 | RNVC: 2
10163656: RNCC: 6 | RNVC: 9

5 Oct 1983

3040-01-163-4790
Remote Control Lever

011634790
10502288-PT: RNCC: 3 | RNVC: 2
10502288: RNCC: 5 | RNVC: 9

5 Oct 1983

3040-01-163-7285
Hub Cap Assembly

011637285
15147: RNCC: 3 | RNVC: 2
302BCA: RNCC: 3 | RNVC: 2
15147: RNCC: 5 | RNVC: 9

6 Oct 1983

3040-01-164-6214
Linear Actuating Cylinder

011646214
5210330: RNCC: 3 | RNVC: 2
A67-B: RNCC: 5 | RNVC: 2
A67-B: RNCC: 5 | RNVC: 9

19 Oct 1983

3040-01-164-7817
Shouldered Shaft

011647817
60-301-0019-1: RNCC: 3 | RNVC: 2
01-435-5 PIECE 39: RNCC: 5 | RNVC: 2

21 Oct 1983

3040-01-165-7290
Manual Control Lever

011657290
8742809-10: RNCC: 3 | RNVC: 2
3037-1075-1: RNCC: 5 | RNVC: 9

3 Nov 1983

3040-01-166-2384
Straight Shaft

011662384
10504879: RNCC: 3 | RNVC: 2

9 Nov 1983

3040-01-166-6638
Straight Shaft

011666638
50BA506652: RNCC: 3 | RNVC: 2
62-10404-00 PG9 ITEM 109: RNCC: C | RNVC: 1

16 Nov 1983

3040-01-166-7657
Manual Control Lever

011667657
102185-2: RNCC: 3 | RNVC: 2
CV0104-001: RNCC: 5 | RNVC: 2
CN0104-001: RNCC: 5 | RNVC: 2
2000374-1: RNCC: 5 | RNVC: 2
1033655-8: RNCC: C | RNVC: 1

16 Nov 1983

3040-01-167-8312
Sear Rocker

011678312
12524092: RNCC: 3 | RNVC: 2
12524092: RNCC: 5 | RNVC: 2
2 0040-054: RNCC: 5 | RNVC: 2
465-4092: RNCC: 5 | RNVC: 2
2 0040-054: RNCC: 5 | RNVC: 9
465-4092: RNCC: 5 | RNVC: 9
1005PL1276118: RNCC: 6 | RNVC: 9
10125943: RNCC: 6 | RNVC: 9

7 Dec 1983

3040-01-167-8327
Shouldered Shaft

011678327
12524074: RNCC: 3 | RNVC: 2
12524074: RNCC: 5 | RNVC: 2
10125898: RNCC: 6 | RNVC: 9

7 Dec 1983

3040-01-168-9351
Push-Pull Control Assembly

011689351
2584618-1: RNCC: 3 | RNVC: 2
2584618-1: RNCC: 5 | RNVC: 2
2584618: RNCC: D | RNVC: 9

29 Dec 1983

3040-01-170-2459
Straight Shaft

011702459
65-15-1: RNCC: 3 | RNVC: 9

22 Jan 1984

3040-01-172-3392
Straight Shaft

011723392
75A613012-2001: RNCC: 3 | RNVC: 9
75A613012-2001: RNCC: 5 | RNVC: 9
75A613012-2001: RNCC: C | RNVC: 1

20 Feb 1984

3040-01-172-3394
Shouldered Shaft

011723394
726-218-001: RNCC: 3 | RNVC: 2
726-218-001: RNCC: 5 | RNVC: 1

20 Feb 1984

3040-01-172-8914
B Xmtr Shaft

011728914
49840: RNCC: 3 | RNVC: 2

28 Feb 1984

3040-01-172-5991
Straight Shaft

011725991
709-4684860 ITEM 20: RNCC: 3 | RNVC: 2
87832-0320 ITEM 20: RNCC: 5 | RNVC: 2

22 Feb 1984

3040-01-173-5240
Compressor Arm

011735240
9125M65G02: RNCC: 3 | RNVC: 2
9125M65G02: RNCC: 5 | RNVC: 9
9633M17G05: RNCC: E | RNVC: 8

7 Mar 1984

3040-01-173-8452
Mechanical Drive Housing

011738452
013074: RNCC: 3 | RNVC: 2

10 Mar 1984

3040-01-173-8468
Linear Actuating Cylinder Assembly

011738468
SDD-12-4: RNCC: 3 | RNVC: 2
654-00-0004: RNCC: 5 | RNVC: 9

10 Mar 1984

3040-01-176-4123
Rigid Connecting Link

011764123
1122346C1: RNCC: 3 | RNVC: 2
1122346C1: RNCC: 3 | RNVC: 9
1122346C1: RNCC: 5 | RNVC: 2

11 Apr 1984

3040-01-176-4122
Rigid Connecting Link

011764122
L108528: RNCC: 3 | RNVC: 2

11 Apr 1984

3040-01-176-9528
Linear Actuating Cylinder Assembly Parts Kit

011769528
31626: RNCC: 3 | RNVC: 2
31626: RNCC: 5 | RNVC: 9

18 Apr 1984

3040-01-177-2127
Terminal Gove Shaft

011772127
3598-051: RNCC: 3 | RNVC: 2
89015-158 SN235: RNCC: C | RNVC: 1

20 Apr 1984

3040-01-177-3046
Mechanical Drive Housing

011773046
B7522-C: RNCC: 3 | RNVC: 2
10906687: RNCC: 3 | RNVC: 2

23 Apr 1984

3040-01-177-5692
Rotating Shaft Eye Bracket

011775692
46-0902-1: RNCC: 3 | RNVC: 2

27 Apr 1984

3040-01-178-5538
Mechanical Drive Housing

011785538
12322521: RNCC: 3 | RNVC: 2

7 May 1984

3040-01-177-5374
Rigid Connecting Link

011775374
D71516: RNCC: 3 | RNVC: 2

26 Apr 1984

3040-01-178-8906
Nonvehicular Propeller Shaft

011788906
1104000C1: RNCC: 3 | RNVC: 2
1104000C1: RNCC: 3 | RNVC: 9

11 May 1984

3040-01-179-4977
Feedback Shaft

011794977
754/2/36039/000: RNCC: 3 | RNVC: 2

19 May 1984

3040-01-179-5093
Hub Clamp

011795093
P300330: RNCC: 3 | RNVC: 2
P300330: RNCC: 5 | RNVC: 9

19 May 1984

3040-01-180-2916
Shouldered Shaft

011802916
RE-B102204: RNCC: 3 | RNVC: 9
ASC1542436: RNCC: 5 | RNVC: 9
RE-B102204: RNCC: C | RNVC: 1
RE-B102204: RNCC: D | RNVC: 9

25 May 1984

3040-01-180-3734
Friction Lining

011803734
2A1-749-2: RNCC: 3 | RNVC: 2

27 May 1984

3040-01-180-4516
Shouldered Shaft

011804516
LM2527300: RNCC: 3 | RNVC: 2

29 May 1984

3040-01-181-1848
Straight Shaft

011811848
30057-13: RNCC: 3 | RNVC: 2
30057: RNCC: 5 | RNVC: 9

7 Jun 1984

3040-01-181-6487
Body Hub

011816487
13215E6721: RNCC: 3 | RNVC: 2

13 Jun 1984

3040-01-181-6485
Body Hub

011816485
13215E6720: RNCC: 3 | RNVC: 2

13 Jun 1984

3040-01-182-0105
Rigid Connecting Link

011820105
4474-046: RNCC: 3 | RNVC: 2

19 Jun 1984

3040-01-182-6878
Linear Actuating Cylinder Assembly

011826878
81-8991: RNCC: 3 | RNVC: 9

27 Jun 1984

3040-01-183-0175
Spur Gearshaft

011830175
301-482-418-0: RNCC: 3 | RNVC: 2

1 Jul 1984

3040-01-183-0634
Straight Shaft

011830634
7-217236421: RNCC: 3 | RNVC: 2
7-217236421: RNCC: 5 | RNVC: 9

1 Jul 1984

3040-01-183-6876
Shouldered Shaft

011836876
13211E9108: RNCC: 3 | RNVC: 2

8 Jul 1984

3040-01-184-3202
Rigid Connecting Link

011843202
1292197-105: RNCC: 3 | RNVC: 2
1292197-101: RNCC: 5 | RNVC: 9
1292197-105: RNCC: 5 | RNVC: 9

17 Jul 1984

3040-01-184-4326
Shouldered Shaft

011844326
9D1139: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-184-4585
Linear Actuating Cylinder Piston Rod

011844585
5J2893: RNCC: 3 | RNVC: 2

18 Jul 1984

3040-01-184-4907
Straight Shaft

011844907
BML65015: RNCC: 3 | RNVC: 2
12330389: RNCC: 3 | RNVC: 2
BML65015: RNCC: 5 | RNVC: 2

18 Jul 1984

3040-01-184-5561
Rigid Connecting Link

011845561
LK-721014A: RNCC: 3 | RNVC: 2
D71427: RNCC: 5 | RNVC: 2

19 Jul 1984

3040-01-184-6233
Rigid Connecting Link

011846233
406-001-024-107: RNCC: 3 | RNVC: 2

20 Jul 1984

3040-01-184-6718
Spur Gearshaft

011846718
7-217221309-3: RNCC: 3 | RNVC: 2
7-217221309-3: RNCC: 5 | RNVC: 9

21 Jul 1984

3040-01-185-2427
Shaft Handle

011852427
20239-1050: RNCC: 3 | RNVC: 2

26 Jul 1984

3040-01-185-5474
Rigid Connecting Link

011855474
75A603000-1003: RNCC: 3 | RNVC: 2
75A603000: RNCC: D | RNVC: 9

31 Jul 1984

3040-01-185-9512
Shouldered Shaft

011859512
HM025-681-1: RNCC: 1 | RNVC: 2
014218-1: RNCC: 3 | RNVC: 2
HM025-681: RNCC: 5 | RNVC: 9
014218-1: RNCC: C | RNVC: 1
014218: RNCC: D | RNVC: 9

5 Aug 1984

3040-01-186-0905
Pump Oil Shaft

011860905
5104876: RNCC: 3 | RNVC: 2
3040PL0948058: RNCC: 6 | RNVC: 9

7 Aug 1984

3040-01-186-0927
Mechanical Drive Housing

011860927
408667-22: RNCC: 3 | RNVC: 9
7N1687: RNCC: 5 | RNVC: 2

7 Aug 1984

3040-01-186-1370
Shouldered Shaft

011861370
3081106-1: RNCC: 3 | RNVC: 2

8 Aug 1984

3040-01-140-6716
Brake Housing Assy

011406716
51588-R: RNCC: 3 | RNVC: 2

17 Oct 1982

3040-01-140-7768
Bell Crank

011407768
3537531-1: RNCC: 3 | RNVC: 2
3537531-1: RNCC: 5 | RNVC: 2
3537531-1: RNCC: 5 | RNVC: 9
10106919: RNCC: 6 | RNVC: 9

18 Oct 1982

3040-01-140-7769
Remote Control Lever

011407769
145367: RNCC: 3 | RNVC: 2
10106920: RNCC: 6 | RNVC: 9

18 Oct 1982

3040-01-142-1686
Mechanical Drive Housing

011421686
2884990: RNCC: 3 | RNVC: 2
142294: RNCC: 5 | RNVC: 2

13 Nov 1982

3040-01-142-7522
Rigid Connecting Link

011427522
12293552: RNCC: 3 | RNVC: 2
12293552: RNCC: 5 | RNVC: 1
12293552: RNCC: 5 | RNVC: 9

20 Nov 1982

3040-01-144-5537
Bell Crank

011445537
178480-C: RNCC: 3 | RNVC: 2

23 Dec 1982

3040-01-142-9644
Bell Crank

011429644
70400-01215-042: RNCC: 3 | RNVC: 2

23 Nov 1982

3040-01-143-1852
Shouldered Shaft

011431852
64351-11030-105: RNCC: 3 | RNVC: 2

28 Nov 1982

3040-01-146-1618
Rigid Connecting Link

011461618
70700-20415-041: RNCC: 3 | RNVC: 2

26 Jan 1983

3040-01-156-8289
Shouldered Shaft

011568289
1816072: RNCC: 3 | RNVC: 2

25 Jun 1983

3040-01-179-7453
Rigid Connecting Link

011797453
7-311112039: RNCC: 3 | RNVC: 2
7-311112039X: RNCC: 5 | RNVC: 9
7-311112039: RNCC: 5 | RNVC: 9

21 May 1984

3040-01-062-3137
Shouldered Shaft

010623137
SM-C-773472-4: RNCC: 3 | RNVC: 2
507064-11: RNCC: 5 | RNVC: 2
165-01/83059: RNCC: 5 | RNVC: 2
2479517: RNCC: 5 | RNVC: 2
SM-C-773350: RNCC: 5 | RNVC: 9
165-01/83059: RNCC: 5 | RNVC: 9

15 Jul 1978

3040-01-062-2705
Spur Gearshaft

010622705
2651329: RNCC: 3 | RNVC: 2

13 Jul 1978

3040-01-061-6391
Spur Gearshaft

010616391
803-4385058PC53: RNCC: 3 | RNVC: 2
4385058 PIECE 53: RNCC: 5 | RNVC: 2
810-4385058PC53: RNCC: 5 | RNVC: 9
810-4385058: RNCC: 5 | RNVC: 9
810-4385058 PIE: RNCC: C | RNVC: 1
803-4385058: RNCC: D | RNVC: 9

25 Jun 1978

3040-01-064-7275
Remote Control Lever

010647275
515-4674130 ITEM 2: RNCC: 3 | RNVC: 2
87552-0622 ITEM 2: RNCC: 3 | RNVC: 2
515-4674130: RNCC: D | RNVC: 9
87552-0622: RNCC: D | RNVC: 9

31 Aug 1978

3040-01-065-2767
Linear Actuating Cylinder

010652767
270AS177: RNCC: 3 | RNVC: 2
270AS177: RNCC: 5 | RNVC: 2
270AS177: RNCC: 5 | RNVC: 9

13 Sep 1978

3040-01-069-9124
Control Cam

010699124
68A350728-1008: RNCC: 3 | RNVC: 2
68A350728-1008: RNCC: 5 | RNVC: 2
68A350728-1008: RNCC: 5 | RNVC: 2
68A350728-1008: RNCC: 5 | RNVC: 2
68A350728-1006: RNCC: 5 | RNVC: 9

28 Dec 1978

3040-01-070-3112
Control Cam

010703112
139C7803: RNCC: 3 | RNVC: 2

10 Jan 1979

3040-01-071-9845
Flexible Drive Shaft

010719845
12265775: RNCC: 1 | RNVC: 2
FAUSG11MZ1: RNCC: 3 | RNVC: 2
0312-16188-Y-017.00: RNCC: 5 | RNVC: 9
FAUSG11M21: RNCC: 5 | RNVC: 9
0312-16188-Y-017.00: RNCC: 5 | RNVC: 9

18 Feb 1979

3040-01-073-4063
Personne Heater Valve Shaft

010734063
10941386: RNCC: 3 | RNVC: 2

15 Mar 1979

3040-01-073-7974
Rigid Connecting Link

010737974
12274673: RNCC: 3 | RNVC: 2
XM65015: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-073-7990
Remote Control Lever

010737990
12274678: RNCC: 3 | RNVC: 2
XM65012: RNCC: 5 | RNVC: 9

21 Mar 1979

3040-01-073-8000
Shouldered Shaft

010738000
12267950: RNCC: 3 | RNVC: 2
DAX12076: RNCC: 5 | RNVC: 2

21 Mar 1979

3040-01-073-9449
Canopy Latch Assembly

010739449
16K0575-805: RNCC: 3 | RNVC: 2
16K0575-31: RNCC: 5 | RNVC: 2
3040PL0666049: RNCC: 6 | RNVC: 9
16K0575-801: RNCC: E | RNVC: 8

23 Mar 1979

3040-01-073-9856
Spur Gearshaft

010739856
12285324: RNCC: 3 | RNVC: 2

24 Mar 1979

3040-01-074-7720
Counterbalance Weight

010747720
387384CL4: RNCC: 3 | RNVC: 2

6 Apr 1979

3040-01-074-4162
Rigid Connecting Link

010744162
2006303-107: RNCC: 3 | RNVC: 9
2006303-107: RNCC: 5 | RNVC: 2
2006303-107: RNCC: 5 | RNVC: 2
2006303-107: RNCC: 5 | RNVC: 2
2006303-107: RNCC: 5 | RNVC: 2
2006303-107: RNCC: 5 | RNVC: 9
2006303-107: RNCC: 5 | RNVC: 9
2006303-107: RNCC: C | RNVC: 1

30 Mar 1979

3040-01-075-2219
Automatic Bra Shaft

010752219
42305-203: RNCC: 3 | RNVC: 2
42305-203: RNCC: 3 | RNVC: 9
42305-203: RNCC: 5 | RNVC: 9
42305E203: RNCC: 5 | RNVC: 9

17 Apr 1979

3040-01-076-1783
Right Trunnion Pin

010761783
12273998: RNCC: 3 | RNVC: 2
3040010761783: RNCC: 6 | RNVC: 9

2 May 1979

3040-01-076-3502
Shouldered Shaft

010763502
657131: RNCC: 3 | RNVC: 2

4 May 1979

3040-01-076-4173
Flexible Shaft Assembly Casing

010764173
12265768: RNCC: 3 | RNVC: 2

6 May 1979

3040-01-076-6220
Bell Crank

010766220
12271205: RNCC: 3 | RNVC: 2
3-160-039-06: RNCC: 5 | RNVC: 2
3-160-537X01: RNCC: 5 | RNVC: 2
3-160-537X01: RNCC: 5 | RNVC: 2
12286600: RNCC: 5 | RNVC: 9

9 May 1979

3040-01-076-5294
Housing Adapter

010765294
767164-1: RNCC: 3 | RNVC: 2

7 May 1979

3040-01-077-2883
Straight Shaft

010772883
32277-000L: RNCC: 3 | RNVC: 2
32277: RNCC: 5 | RNVC: 9

20 May 1979

3040-01-077-6897
Shaft Assembly

010776897
42277-217: RNCC: 3 | RNVC: 9
42277D217: RNCC: 5 | RNVC: 9

29 May 1979

3040-01-077-8991
Yoke Flange End

010778991
3-2-479: RNCC: 3 | RNVC: 2
3-2-479: RNCC: 5 | RNVC: 2
211259R1: RNCC: 5 | RNVC: 2
148N-2-479: RNCC: 5 | RNVC: 2
3-2-479: RNCC: 5 | RNVC: 9

2 Jun 1979

3040-01-077-4387
Rigid Connecting Link

010774387
4500-217: RNCC: 3 | RNVC: 2
68B618000-217: RNCC: 5 | RNVC: 2
4031-5: RNCC: 5 | RNVC: 9
4500: RNCC: D | RNVC: 9

23 May 1979

3040-01-078-1187
Hub Clamp

010781187
12310675: RNCC: 3 | RNVC: 2
3040010781187: RNCC: 6 | RNVC: 9
12282085: RNCC: D | RNVC: 9

9 Jun 1979

3040-01-082-1296
Rigid Connecting Link

010821296
L47832: RNCC: 3 | RNVC: 2

25 Aug 1979

3040-01-083-3886
Shouldered Shaft

010833886
727367: RNCC: 3 | RNVC: 2

22 Sep 1979

3040-01-085-2708
Linear Actuating Cylinder Piston

010852708
87552-2603 ITEM 9: RNCC: 3 | RNVC: 2
515-4674136 ITEM 9: RNCC: 3 | RNVC: 2
515-4674136REV: RNCC: C | RNVC: 1
87552-2603: RNCC: D | RNVC: 9
515-4674136: RNCC: D | RNVC: 9

4 Nov 1979

3040-01-086-9751
Actuator Bearing Cap

010869751
N1437: RNCC: 3 | RNVC: 2
1797-1277 ITEM21: RNCC: 5 | RNVC: 9

8 Dec 1979

3040-01-088-1179
Shouldered Shaft

010881179
9240-003-SHEET 70: RNCC: 3 | RNVC: 2
9240-003-70: RNCC: 5 | RNVC: 9
26800171: RNCC: 5 | RNVC: 9

6 Jan 1980

3040-01-088-1917
Bell Crank

010881917
70400-02173-045: RNCC: 3 | RNVC: 2
3040PL1943872: RNCC: 6 | RNVC: 9

8 Jan 1980

3040-01-089-3090
Shouldered Shaft

010893090
139C6928: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-090-0615
Rigid Connecting Link

010900615
3529-1: RNCC: 3 | RNVC: 2
160C611501-1: RNCC: 7 | RNVC: 9
160C611501-1: RNCC: C | RNVC: 1

11 Feb 1980

3040-01-089-3084
Straight Shaft

010893084
162B8261: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-090-4482
Bell Crank

010904482
12255965-1: RNCC: 3 | RNVC: 2

17 Feb 1980

3040-01-089-7855
Control Cam

010897855
12524263: RNCC: 3 | RNVC: 2
465-4263: RNCC: 5 | RNVC: 2
12524263: RNCC: 5 | RNVC: 2
465-4263: RNCC: 5 | RNVC: 9
10126783: RNCC: 6 | RNVC: 9
1005PL1276547: RNCC: 6 | RNVC: 9

7 Feb 1980

3040-01-090-3084
Counterbalance Weight

010903084
3033T37P15: RNCC: 3 | RNVC: 2

16 Feb 1980

3040-01-090-6701
Counterbalance Weight

010906701
3033T37P09: RNCC: 3 | RNVC: 2
3033T37: RNCC: D | RNVC: 9

22 Feb 1980

3040-01-091-3845
Rigid Connecting Link

010913845
70400-02252-135: RNCC: 1 | RNVC: 2
2002-1: RNCC: 3 | RNVC: 2
AS4-1000-135: RNCC: 5 | RNVC: 2
AS4-1000-135: RNCC: 5 | RNVC: 9
1100110-135: RNCC: 5 | RNVC: 9
70400-022520135: RNCC: 5 | RNVC: 9
SR11780A: RNCC: 5 | RNVC: 9
3040PL1961969: RNCC: 6 | RNVC: 9
70400-02252: RNCC: D | RNVC: 9

7 Mar 1980

3040-01-090-9342
Straight Shaft

010909342
12256352: RNCC: 3 | RNVC: 2

28 Feb 1980

3040-01-091-3847
Rigid Connecting Link

010913847
70410-02525-102: RNCC: 3 | RNVC: 2
70410-02525-102: RNCC: 5 | RNVC: 2

7 Mar 1980

3040-01-091-5113
Motor Shaft

010915113
601397-67-A: RNCC: 3 | RNVC: 9
601397-67: RNCC: 5 | RNVC: 9

9 Mar 1980

3040-01-092-7992
Pneumatic Actuator Cylinder Housing

010927992
N1453: RNCC: 3 | RNVC: 2
1810-1290 ITEM 14: RNCC: 5 | RNVC: 2
G-1089: RNCC: 5 | RNVC: 2
1810-1290: RNCC: D | RNVC: 9

4 Apr 1980

3040-01-092-8107
Brake Disc

010928107
581J1A: RNCC: 3 | RNVC: 2
581J1-3K: RNCC: 5 | RNVC: 2
581J1A: RNCC: 5 | RNVC: 2
581J1: RNCC: 5 | RNVC: 9
581J1: RNCC: 5 | RNVC: 9

4 Apr 1980

3040-01-094-1682
Manual Control Lever

010941682
1231-192-1: RNCC: 3 | RNVC: 2
1231-192-1: RNCC: 5 | RNVC: 2

5 May 1980

3040-01-094-2345
Bell Crank

010942345
160D123056-3: RNCC: 3 | RNVC: 2
160D123056-3: RNCC: 5 | RNVC: 2
160D123056-3: RNCC: 5 | RNVC: 2
160D123056-3: RNCC: 5 | RNVC: 9
160D123056-3: RNCC: C | RNVC: 1

6 May 1980

3040-01-095-1023
Spur Gearshaft

010951023
12292388: RNCC: 3 | RNVC: 2

21 May 1980

3040-01-095-1174
Straight Shaft

010951174
1C6345P08: RNCC: 3 | RNVC: 2

22 May 1980

3040-01-095-5872
Shouldered Shaft

010955872
8-52B-26-1: RNCC: 3 | RNVC: 9
8-52T-06 ITEM 6: RNCC: 5 | RNVC: 9
PL-8-52T-06ITEM6: RNCC: 5 | RNVC: 9
8-52B-26-1: RNCC: 5 | RNVC: 9
8-52-429: RNCC: 5 | RNVC: 9
8-52T06 ITEM 6: RNCC: 5 | RNVC: 9
8-52-429: RNCC: C | RNVC: 1
8-52B-26: RNCC: D | RNVC: 9

4 Jun 1980

3040-01-097-1202
Spur Gearshaft

010971202
3868W11G701: RNCC: 3 | RNVC: 2

6 Jul 1980

3040-01-099-0154
Manual Control Lever

010990154
16103315: RNCC: 3 | RNVC: 2
16103315: RNCC: 3 | RNVC: 9

10 Aug 1980

3040-01-099-0728
Stub Shaft

010990728
16200797: RNCC: 3 | RNVC: 2
16200797: RNCC: 3 | RNVC: 9
16200797REV2: RNCC: 5 | RNVC: 2
CAFB6633F: RNCC: 5 | RNVC: 2
16200797REV2: RNCC: 5 | RNVC: 9
CAFB6633F: RNCC: 5 | RNVC: 9

13 Aug 1980

3040-01-099-2489
Rigid Connecting Link

010992489
274081-1: RNCC: 3 | RNVC: 2
274081-1: RNCC: 5 | RNVC: 1

15 Aug 1980

3040-01-101-2430
Rigid Connecting Link

011012430
04100250: RNCC: 3 | RNVC: 2
267354: RNCC: 5 | RNVC: 2
A04100250: RNCC: 5 | RNVC: 9

25 Sep 1980

3040-01-101-3726
Linear Actuating Cylinder Assembly

011013726
G103232: RNCC: 3 | RNVC: 2

27 Sep 1980

3040-01-102-2509
Rigid Connecting Link

011022509
70207-01028-102: RNCC: 3 | RNVC: 2

16 Oct 1980

3040-01-101-7461
Linear Actuating Cylinder Assembly

011017461
G103241: RNCC: 3 | RNVC: 2

5 Oct 1980

3040-01-103-0535
Brake Disc

011030535
5021C112-1: RNCC: 3 | RNVC: 2
5021C112-1: RNCC: 5 | RNVC: 9
5021C112-1: RNCC: 5 | RNVC: 9

3 Nov 1980

3040-01-104-8792
Shaft Retaining Plate

011048792
306517: RNCC: 3 | RNVC: 2
306517: RNCC: 5 | RNVC: 9
306517: RNCC: 5 | RNVC: 9

12 Dec 1980

3040-01-103-9123
Rigid Connecting Link

011039123
763543-1: RNCC: 3 | RNVC: 2
763543-1: RNCC: 5 | RNVC: 2
763543-1: RNCC: 5 | RNVC: 2
763543-1: RNCC: 5 | RNVC: 9
763543: RNCC: 5 | RNVC: 9

22 Nov 1980

3040-01-108-9541
Shouldered Shaft

011089541
006-7100115-302: RNCC: 3 | RNVC: 2
728-0115-237: RNCC: 5 | RNVC: 9
55-22033-15: RNCC: 5 | RNVC: 9
722-0148-000 PIECE 6: RNCC: 5 | RNVC: 9
728-0115-237: RNCC: 5 | RNVC: 9
722-0148-000 PIECE 6: RNCC: 5 | RNVC: 9
AB722-0091-000 PC 6: RNCC: C | RNVC: 1
722-0148-000: RNCC: D | RNVC: 9

8 Mar 1981

3040-01-106-6619
Shouldered Shaft

011066619
12298334: RNCC: 3 | RNVC: 2

22 Jan 1981

3040-01-106-7301
Hub Clamp

011067301
12297334: RNCC: 3 | RNVC: 2
12297334: RNCC: 5 | RNVC: 2
12297334: RNCC: 5 | RNVC: 2

24 Jan 1981

3040-01-110-0312
Rigid Connecting Link

011100312
3365779-1: RNCC: 3 | RNVC: 2
3365779-1: RNCC: 5 | RNVC: 2
3365779-1: RNCC: 5 | RNVC: 2
3365779-1: RNCC: 5 | RNVC: 2

25 Mar 1981

3040-01-110-5030
Brake Disc

011105030
3706-1: RNCC: 3 | RNVC: 2
3706-1: RNCC: 5 | RNVC: 2

2 Apr 1981

3040-01-111-4740
Shaft Collar

011114740
12287886: RNCC: 3 | RNVC: 2

17 Apr 1981

3040-01-112-9473
Rigid Connecting Link

011129473
3532-3: RNCC: 3 | RNVC: 2
SR11841C3: RNCC: 5 | RNVC: 9

13 May 1981

3040-01-112-8767
Straight Shaft

011128767
3365515-1: RNCC: 3 | RNVC: 2
3365515-1: RNCC: 5 | RNVC: 2
3365515-1: RNCC: 5 | RNVC: 2

12 May 1981

3040-01-113-6160
Manual Control Lever

011136160
716-702006-7: RNCC: 3 | RNVC: 9
716-702006-7: RNCC: 5 | RNVC: 2
10106760: RNCC: 6 | RNVC: 9
716-702006-7: RNCC: C | RNVC: 1

30 May 1981

3040-01-113-9480
Spur Gearshaft

011139480
3882601-1: RNCC: 3 | RNVC: 2
3882601-1: RNCC: 5 | RNVC: 9

6 Jun 1981

3040-01-114-9452
Bevel Gearshaft

011149452
145D6301-2: RNCC: 3 | RNVC: 2
145D6301-2: RNCC: 7 | RNVC: 2

25 Jun 1981

3040-01-115-3716
Bell Crank

011153716
70400-02504-043: RNCC: 3 | RNVC: 2
3040PL1959380: RNCC: 6 | RNVC: 9

4 Jul 1981

3040-01-115-9602
Shouldered Shaft

011159602
61393: RNCC: 3 | RNVC: 2

17 Jul 1981

3040-01-117-5480
Thro Lever Assembly

011175480
5364-528: RNCC: 3 | RNVC: 2

16 Aug 1981

3040-01-117-6894
Weight Counterbalance

011176894
3556943-1: RNCC: 3 | RNVC: 2

20 Aug 1981

3040-01-117-7361
Rigid Connecting Link

011177361
145C3340-10: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-118-5519
Lever

011185519
2712518: RNCC: 3 | RNVC: 2
29KP192: RNCC: 5 | RNVC: 2
2712518: RNCC: 5 | RNVC: 9
29KP192: RNCC: 5 | RNVC: 9

5 Sep 1981

3040-01-119-6673
Lever

011196673
24-4215: RNCC: 3 | RNVC: 2

30 Sep 1981

3040-01-120-3575
Brake Disc

011203575
3030465: RNCC: 3 | RNVC: 2

17 Oct 1981

3040-01-121-2888
Wiper Retainer

011212888
87625-0306 ITEM 12: RNCC: 3 | RNVC: 2
518-4674804 ITEM 12: RNCC: 5 | RNVC: 2
87625-0306 ITEM 12: RNCC: 5 | RNVC: 9
518-4674804: RNCC: D | RNVC: 9
87625-0306: RNCC: D | RNVC: 9

4 Nov 1981

3040-01-121-7742
Rigid Connecting Link

011217742
12256548-1: RNCC: 3 | RNVC: 2

8 Nov 1981

3040-01-122-3550
Synchro Clamp

011223550
503955: RNCC: 3 | RNVC: 2
503955: RNCC: 5 | RNVC: 9

19 Nov 1981

3040-01-123-1747
Rigid Connecting Link

011231747
3289-8: RNCC: 3 | RNVC: 2
10106804: RNCC: 6 | RNVC: 9
3289: RNCC: D | RNVC: 9

6 Dec 1981

3040-01-123-2219
Counterbalance Weight

011232219
579-1005-17: RNCC: 3 | RNVC: 2
10163644: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-124-3838
Shouldered Shaft

011243838
B5-45-3274: RNCC: 3 | RNVC: 2

1 Jan 1982

3040-01-124-9319
Shouldered Shaft

011249319
12307394: RNCC: 3 | RNVC: 2

16 Jan 1982

3040-01-125-3141
Grease Cap

011253141
6037-0023-01: RNCC: 3 | RNVC: 2
10106812: RNCC: 6 | RNVC: 9

25 Jan 1982

3040-01-125-7471
Rigid Connecting Link

011257471
MBEU-65850: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8208
Rigid Connecting Link

011258208
6513-1-M: RNCC: 3 | RNVC: 2
SR11529A-101: RNCC: 5 | RNVC: 2
6513-1: RNCC: 5 | RNVC: 9
10106819: RNCC: 6 | RNVC: 9

1 Feb 1982

3040-01-126-9836
Thrust Collar

011269836
4 3/8-4025-1: RNCC: 3 | RNVC: 2
3205205 PIECE 1: RNCC: 5 | RNVC: 2
464025: RNCC: D | RNVC: 9

21 Feb 1982

3040-01-126-7838
Flexible Drive Shaft

011267838
12292480: RNCC: 3 | RNVC: 2

17 Feb 1982

3040-01-125-9855
Shaft

011259855
5139747: RNCC: 3 | RNVC: 2
01-125-9855: RNCC: 5 | RNVC: 2
3040PL0951918: RNCC: 6 | RNVC: 9

5 Feb 1982

3040-01-125-9976
Shouldered Shaft

011259976
7N9635: RNCC: 3 | RNVC: 2

5 Feb 1982

3040-01-126-6635
Shouldered Shaft

011266635
1D27-1: RNCC: 3 | RNVC: 2

15 Feb 1982

3040-01-128-5873
Bevel Gearshaft

011285873
2040691-1: RNCC: 3 | RNVC: 2
2040691-1: RNCC: 5 | RNVC: 9
2040691: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-128-5475
Pawl

011285475
9348294: RNCC: 3 | RNVC: 2
22663: RNCC: 5 | RNVC: 1
3616630019: RNCC: 5 | RNVC: 2
711531507206: RNCC: 5 | RNVC: 9
10421321: RNCC: 6 | RNVC: 9

25 Mar 1982

3040-01-128-5903
Rigid Connecting Link

011285903
6512-17: RNCC: 3 | RNVC: 2
74B618011-117: RNCC: 5 | RNVC: 2
SR11393A117: RNCC: 5 | RNVC: 9
SR11393A117: RNCC: 5 | RNVC: 9
10106855: RNCC: 6 | RNVC: 9
74B618011-117: RNCC: 7 | RNVC: 2
SR11393A: RNCC: D | RNVC: 9

25 Mar 1982

3040-01-128-9334
Rigid Connecting Link

011289334
74A670236-1001: RNCC: 3 | RNVC: 2
10106858: RNCC: 6 | RNVC: 9
74A670236: RNCC: D | RNVC: 9

27 Mar 1982

3040-01-128-9332
Rigid Connecting Link

011289332
1534AS286: RNCC: 3 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 9
1534AS286: RNCC: 5 | RNVC: 9
D013537-501: RNCC: 5 | RNVC: 9
D013537-501: RNCC: 5 | RNVC: 9
10143581: RNCC: 6 | RNVC: 9

27 Mar 1982

3040-01-128-9338
Rigid Connecting Link

011289338
6512-11: RNCC: 3 | RNVC: 2
10106861: RNCC: 6 | RNVC: 9
SR11393A111: RNCC: C | RNVC: 1
6512: RNCC: D | RNVC: 9

27 Mar 1982

3040-01-129-2164
Rigid Connecting Link

011292164
12307466: RNCC: 3 | RNVC: 2

4 Apr 1982

3040-01-129-3927
Bell Crank

011293927
65414-03106-052: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-3940
Rigid Connecting Link

011293940
65661-06260-044: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-129-4632
Shouldered Shaft

011294632
24915: RNCC: 3 | RNVC: 2
24915: RNCC: 5 | RNVC: 2
24915: RNCC: 5 | RNVC: 9
24915: RNCC: 5 | RNVC: 9

7 Apr 1982

3040-01-129-3933
Rigid Connecting Link

011293933
65414-03112-043: RNCC: 3 | RNVC: 2

5 Apr 1982

3040-01-107-7426
Tachometer Drive Shaft

011077426
16701387: RNCC: 3 | RNVC: 9
16701387: RNCC: C | RNVC: 1

12 Feb 1981

3040-01-108-5308
Rigid Connecting Link

011085308
12299024: RNCC: 3 | RNVC: 2
12299024: RNCC: 5 | RNVC: 2
12299024: RNCC: 5 | RNVC: 9
10085829: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-104-9155
Control Lever Assembly

011049155
12256356-2: RNCC: 3 | RNVC: 2

13 Dec 1980

3040-01-108-5344
Bell Crank

011085344
12299244: RNCC: 3 | RNVC: 2
10085844: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-109-4302
Mechanical Drive Housing

011094302
12299074: RNCC: 3 | RNVC: 2
10085850: RNCC: 6 | RNVC: 9

15 Mar 1981

3040-01-106-8084
Shouldered Shaft

011068084
12294635: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-125-6925
Shouldered Shaft

011256925
65125-11214-101: RNCC: 3 | RNVC: 2
65125-11214-101: RNCC: 5 | RNVC: 2
65125-11214-101: RNCC: 5 | RNVC: 2

1 Feb 1982

3040-01-127-8423
Shaft Collar

011278423
232-36242-1: RNCC: 3 | RNVC: 2

10 Mar 1982

3040-01-128-1515
Body Hub

011281515
838-743-041: RNCC: 3 | RNVC: 2

18 Mar 1982

3040-01-107-0398
Collar

011070398
5166263: RNCC: 3 | RNVC: 2

30 Jan 1981

3040-01-059-8335
Straight Shaft

010598335
162D622333-2001: RNCC: 3 | RNVC: 2
162D622333-2001: RNCC: 5 | RNVC: 2
160D622333-15: RNCC: 5 | RNVC: 2
160D622333-13: RNCC: 5 | RNVC: 9
160D622333-15: RNCC: 5 | RNVC: 9
160D622333-15: RNCC: C | RNVC: 1

16 Apr 1978

3040-01-060-8258
Shaft Collar

010608258
2006006-1: RNCC: 3 | RNVC: 9
2006006-1: RNCC: C | RNVC: 1

2 Jun 1978

3040-01-060-9347
Piston Ring

010609347
9333-00-0090-407: RNCC: 3 | RNVC: 2
9333-00-0000 PIECE 9: RNCC: 5 | RNVC: 2
9333-00-0000 PIECE 9: RNCC: 5 | RNVC: 9
9333-00-0090-407: RNCC: 5 | RNVC: 9
9333-00-0000: RNCC: 5 | RNVC: 9
9333-00-0090: RNCC: 5 | RNVC: 9
9333-00-0000: RNCC: D | RNVC: 9

7 Jun 1978

3040-01-061-2181
Counterbalance Weight

010612181
426836CLC: RNCC: 3 | RNVC: 2

14 Jun 1978

3040-01-063-9309
Counterbalance Weight

010639309
579-1024-03: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-063-9310
Counterbalance Weight

010639310
579-1024-04: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-063-9316
Counterbalance Weight

010639316
579-1020-04: RNCC: 3 | RNVC: 2

14 Aug 1978

3040-01-067-8943
Nonrotating Shaft Eye Bracket

010678943
12265821: RNCC: 3 | RNVC: 2

10 Nov 1978

3040-01-070-7372
Rigid Connecting Link

010707372
16K0571-861: RNCC: 3 | RNVC: 2
3040PL0666031: RNCC: 6 | RNVC: 9

18 Jan 1979

3040-01-070-5968
Straight Shaft

010705968
11625085: RNCC: 3 | RNVC: 2

14 Jan 1979

3040-01-071-2596
Control Cam

010712596
SM-C-890169: RNCC: 3 | RNVC: 2
SM-C-890169: RNCC: 3 | RNVC: 2

4 Feb 1979

3040-01-071-9669
Control Cam

010719669
42305-585: RNCC: 3 | RNVC: 2
42305-585: RNCC: 5 | RNVC: 9
42305D585: RNCC: 5 | RNVC: 9

17 Feb 1979

3040-01-072-2801
Straight Shaft

010722801
68A351020-2009: RNCC: 3 | RNVC: 2

26 Feb 1979

3040-01-072-8154
Rigid Connecting Link

010728154
12283260: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-072-8042
Shaft Retaining Plate

010728042
12283262: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-071-0790
Rigid Connecting Link

010710790
BACR24N6A120: RNCC: 3 | RNVC: 2
BACR24N: RNCC: D | RNVC: 9
65-40218: RNCC: D | RNVC: 9

29 Jan 1979

3040-01-071-5373
Sleeve Shaft

010715373
42277-356: RNCC: 3 | RNVC: 2
42277-356: RNCC: 5 | RNVC: 9
42277D356: RNCC: 5 | RNVC: 9

9 Feb 1979

3040-01-073-9705
Shaft Retaining Plate

010739705
12274143: RNCC: 3 | RNVC: 2
3040010739705: RNCC: 6 | RNVC: 9

24 Mar 1979

3040-01-074-9988
Rigid Connecting Link

010749988
212-001-055-101: RNCC: 3 | RNVC: 2
212-001-055-101: RNCC: 5 | RNVC: 2

11 Apr 1979

3040-01-075-9873
Port Bearing Shoe

010759873
4674852-0005: RNCC: 3 | RNVC: 2
4674852 ITEM 5: RNCC: 3 | RNVC: 2
87631-0104 ITEM 5: RNCC: 3 | RNVC: 2

30 Apr 1979

3040-01-077-2875
Straight Shaft

010772875
3017256: RNCC: 3 | RNVC: 2
3224079 ITEM 25: RNCC: 5 | RNVC: 2

20 May 1979

3040-01-077-1546
Shouldered Shaft

010771546
12282053: RNCC: 3 | RNVC: 2

18 May 1979

3040-01-077-4389
Rigid Connecting Link

010774389
4500-241: RNCC: 3 | RNVC: 2
4500: RNCC: D | RNVC: 9

23 May 1979

3040-01-077-6204
Straight Shaft

010776204
3017145: RNCC: 3 | RNVC: 2
3224073 ITEM 18: RNCC: 5 | RNVC: 2

26 May 1979

3040-01-081-0325
Bevel Gearshaft

010810325
5040T84P01: RNCC: 3 | RNVC: 2

7 Aug 1979

3040-01-081-7112
Hydraulic Parts Kit

010817112
NAVSEA LTR 388 SB-1A WITH ACCY: RNCC: 3 | RNVC: 2
SB-1A WITH ACCY: RNCC: C | RNVC: 1

18 Aug 1979

3040-01-083-7392
Cam Shaft

010837392
5073H128-1: RNCC: 3 | RNVC: 2

29 Sep 1979

3040-01-082-4749
Bevel Gearshaft

010824749
105D3896-2: RNCC: 3 | RNVC: 2
142D5271: RNCC: 5 | RNVC: 9
3040PL1754531: RNCC: 6 | RNVC: 9

3 Sep 1979

3040-01-082-4852
Bell Crank

010824852
1128CM42001-3: RNCC: 3 | RNVC: 2
1128CM42001-3: RNCC: 5 | RNVC: 9

3 Sep 1979

3040-01-085-2117
Spur Gearshaft

010852117
42292D62: RNCC: 3 | RNVC: 2

2 Nov 1979

3040-01-085-0803
Gearshaft

010850803
85413201940: RNCC: 3 | RNVC: 2

31 Oct 1979

3040-01-086-4135
Plate

010864135
845-4687550ITEM6: RNCC: 3 | RNVC: 2
4687550-0006: RNCC: 5 | RNVC: 2
36-01-7896: RNCC: 5 | RNVC: 9

28 Nov 1979

3040-01-086-4477
Manual Control Lever

010864477
69D4887-2: RNCC: 3 | RNVC: 2
316540: RNCC: 3 | RNVC: 9
9792: RNCC: 5 | RNVC: 9
69D4887-2: RNCC: 5 | RNVC: 9
69D4887-2: RNCC: 5 | RNVC: 9
69D4887: RNCC: D | RNVC: 9
316272: RNCC: D | RNVC: 9

29 Nov 1979

3040-01-089-0807
Hub Clamp

010890807
5073H178-1: RNCC: 3 | RNVC: 2

25 Jan 1980

3040-01-089-3088
Shouldered Shaft

010893088
117D2332: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-089-3089
Shouldered Shaft

010893089
139C6867: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-089-3091
Shouldered Shaft

010893091
162B8563: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-090-3083
Counterbalance Weight

010903083
3033T37P14: RNCC: 3 | RNVC: 2

16 Feb 1980

3040-01-092-5932
Accumulator Cap

010925932
N-2244: RNCC: 3 | RNVC: 2
1810-1290 ITEM 22: RNCC: 5 | RNVC: 2
N1456: RNCC: 5 | RNVC: 9
N-2244: RNCC: C | RNVC: 1
1810-1290: RNCC: D | RNVC: 9

29 Mar 1980

3040-01-092-6832
Linear Actuating Cylinder Cap

010926832
N1455: RNCC: 3 | RNVC: 2
1809-1289 ITEM 9: RNCC: 5 | RNVC: 2
1810-1290 ITEM 19: RNCC: 5 | RNVC: 2
1809-1289: RNCC: D | RNVC: 9
1810-1290: RNCC: D | RNVC: 9

31 Mar 1980

3040-01-092-8371
Spur Gearshaft

010928371
87623-1005 ITEM 2: RNCC: 3 | RNVC: 2
518-4674779 ITEM 2: RNCC: 3 | RNVC: 2
518-4674779: RNCC: D | RNVC: 9

4 Apr 1980

3040-01-093-3062
Extension Shaft

010933062
384-1350-00: RNCC: 3 | RNVC: 2

15 Apr 1980

3040-01-093-9085
Gearshaft Assembly

010939085
5073D117-7: RNCC: 3 | RNVC: 2

26 Apr 1980

3040-01-095-4787
Shaft Collar

010954787
C1-9: RNCC: 3 | RNVC: 2
301B022599: RNCC: 5 | RNVC: 9
022599: RNCC: 7 | RNVC: 2

30 May 1980

3040-01-096-4578
Shouldered Shaft

010964578
729521: RNCC: 3 | RNVC: 2
1709857: RNCC: 5 | RNVC: 9

20 Jun 1980

3040-01-098-4348
Shouldered Shaft

010984348
621-2501-002: RNCC: 3 | RNVC: 2
621-2501: RNCC: D | RNVC: 9

1 Aug 1980

3040-01-099-0219
Linear Actuating Cylinder Assembly Parts Kit

010990219
9-752-100160: RNCC: 3 | RNVC: 9
9-752-100160: RNCC: 5 | RNVC: 2

10 Aug 1980

3040-01-099-2495
Shouldered Shaft

010992495
274086-1: RNCC: 3 | RNVC: 2

15 Aug 1980

3040-01-099-6469
Linear Actuating Cylinder

010996469
12288601: RNCC: 3 | RNVC: 2
12288601: RNCC: 5 | RNVC: 2
12288601: RNCC: 5 | RNVC: 2
12288601: RNCC: 5 | RNVC: 9

22 Aug 1980

3040-01-099-8474
Multiple Gears Gearshaft

010998474
12292360: RNCC: 3 | RNVC: 2

24 Aug 1980

3040-01-100-5058
Ball Joint

011005058
R107G: RNCC: 3 | RNVC: 2
139012: RNCC: 3 | RNVC: 2
R1076: RNCC: 5 | RNVC: 9
139012: RNCC: 5 | RNVC: 9

7 Sep 1980

3040-01-101-1578
Linear Actuating Cylinder Assembly Parts Kit

011011578
818-G107912: RNCC: 3 | RNVC: 2
G107912: RNCC: 3 | RNVC: 2
BJI-G103463: RNCC: 5 | RNVC: 2
G103463: RNCC: 5 | RNVC: 9

20 Sep 1980

3040-01-102-1657
Remote Control Lever

011021657
12292424: RNCC: 3 | RNVC: 2

12 Oct 1980

3040-01-102-5745
Straight Shaft

011025745
E114264: RNCC: 3 | RNVC: 2
234248: RNCC: 5 | RNVC: 9

22 Oct 1980

3040-01-102-2334
Rigid Connecting Link

011022334
160D725162-1: RNCC: 3 | RNVC: 2
160D725162-1: RNCC: 5 | RNVC: 9

16 Oct 1980

3040-01-103-0075
Shouldered Shaft

011030075
12009058: RNCC: 3 | RNVC: 2

1 Nov 1980

3040-01-103-2366
Spool-Groov Support

011032366
414121-1: RNCC: 3 | RNVC: 2
214121-1: RNCC: 5 | RNVC: 9

10 Nov 1980

3040-01-106-2270
Bell Crank

011062270
414C1160-1: RNCC: 3 | RNVC: 2

14 Jan 1981

3040-01-108-2164
Rigid Connecting Link

011082164
65400-00111-086: RNCC: 3 | RNVC: 2

23 Feb 1981

3040-01-108-6247
Extension Shaft

011086247
384-1129-00: RNCC: 3 | RNVC: 2

3 Mar 1981

3040-01-110-4313
Straight Shaft

011104313
12298247: RNCC: 3 | RNVC: 2

31 Mar 1981

3040-01-111-0787
Shouldered Shaft

011110787
009737: RNCC: 3 | RNVC: 2
633B009737: RNCC: 5 | RNVC: 9

9 Apr 1981

3040-01-111-4062
Rigid Connecting Link

011114062
12296853: RNCC: 3 | RNVC: 2

16 Apr 1981

3040-01-111-4741
Shouldered Shaft

011114741
12292448: RNCC: 3 | RNVC: 2

17 Apr 1981

3040-01-111-5680
Linear Actuating Cylinder Assembly Parts Kit

011115680
G34819: RNCC: 3 | RNVC: 2
BJI-G34819: RNCC: 5 | RNVC: 2

19 Apr 1981

3040-01-113-3104
Remote Control Lever

011133104
361-11116-501: RNCC: 3 | RNVC: 2

20 May 1981

3040-01-113-2516
Rigid Connecting Link

011132516
3532-1: RNCC: 3 | RNVC: 2
SR11841C1: RNCC: 3 | RNVC: 9

19 May 1981

3040-01-114-7721
Rigid Connecting Link

011147721
12299621: RNCC: 3 | RNVC: 2
10085856: RNCC: 6 | RNVC: 9

22 Jun 1981

3040-01-115-0902
Shaft Collar

011150902
NP5031003: RNCC: 3 | RNVC: 2
NP5031003: RNCC: 5 | RNVC: 9
NP5031003: RNCC: C | RNVC: 1

27 Jun 1981

3040-01-115-6758
Spur Gearshaft

011156758
409C119-1: RNCC: 3 | RNVC: 2
409C119-1: RNCC: 5 | RNVC: 9
10106764: RNCC: 6 | RNVC: 9
409C119: RNCC: D | RNVC: 9

11 Jul 1981

3040-01-116-1306
Straight Shaft

011161306
167C2179: RNCC: 3 | RNVC: 2
10106766: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-116-1310
Shouldered Shaft

011161310
433712: RNCC: 3 | RNVC: 2
10106770: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-117-1293
Right Hand Support Arm

011171293
12011828-2: RNCC: 3 | RNVC: 2
70751-02019-104: RNCC: 5 | RNVC: 9

14 Mar 2001

3040-01-117-3934
Shouldered Shaft Assembly

011173934
145H6606-1: RNCC: 3 | RNVC: 2
145H6606-1: RNCC: 7 | RNVC: 2

14 Aug 1981

3040-01-117-7349
Rigid Connecting Link

011177349
414C2520-3: RNCC: 3 | RNVC: 2
414C2520-3: RNCC: 5 | RNVC: 2

21 Aug 1981

3040-01-117-7360
Rigid Connecting Link

011177360
145C3340-9: RNCC: 3 | RNVC: 2

21 Aug 1981

3040-01-118-6096
Straight Shaft

011186096
60-500-0238-1: RNCC: 3 | RNVC: 2
01-435-0157-5 PIECE 240: RNCC: 5 | RNVC: 2
60-500-0238-1: RNCC: 5 | RNVC: 9
01-435-0157-5 PIECE 240: RNCC: D | RNVC: 9

6 Sep 1981

3040-01-118-4154
Piston Shaft

011184154
4051-9: RNCC: 3 | RNVC: 2
29KP203: RNCC: 5 | RNVC: 2
4051-9: RNCC: 5 | RNVC: 9
29KP203: RNCC: 5 | RNVC: 9

4 Sep 1981

3040-01-119-0732
Bevel Gearshaft

011190732
132D1705: RNCC: 3 | RNVC: 2
10106788: RNCC: 6 | RNVC: 9

16 Sep 1981

3040-01-119-9500
Control Cam

011199500
2640-809X24 PC 21: RNCC: 3 | RNVC: 2
845-4558776 ITEM 18: RNCC: 5 | RNVC: 2
2640-809-24 PIECE 21: RNCC: 5 | RNVC: 9
2642-820-57 PIECE 18: RNCC: 5 | RNVC: 9
2640-809-24: RNCC: D | RNVC: 9

8 Oct 1981

3040-01-121-1608
Linear Actuating Cylinder Head

011211608
13211E7875: RNCC: 3 | RNVC: 2

31 Oct 1981

3040-01-121-8674
Shouldered Shaft

011218674
5541859: RNCC: 3 | RNVC: 2

10 Nov 1981

3040-01-122-5201
Remote Control Lever

011225201
6838278: RNCC: 3 | RNVC: 2
6838278: RNCC: 5 | RNVC: 9

22 Nov 1981

3040-01-122-2944
Driv Shaft Assembly

011222944
13226E0344: RNCC: 1 | RNVC: 2
41A001W-0595-031: RNCC: 3 | RNVC: 2

19 Nov 1981

3040-01-123-2226
Counterbalance Weight

011232226
579-1046-01: RNCC: 3 | RNVC: 2
10163652: RNCC: 6 | RNVC: 9

8 Dec 1981

3040-01-123-2697
Rigid Connecting Link

011232697
70217-01031-048: RNCC: 3 | RNVC: 2
70217-01031-047: RNCC: E | RNVC: 8

10 Dec 1981

3040-01-123-5074
Cam

011235074
B-3600-E: RNCC: 3 | RNVC: 2
D-3600 ITEM 9: RNCC: 5 | RNVC: 2

13 Dec 1981

3040-01-126-6171
Linear Actuating Cylinder

011266171
65261-08068-101: RNCC: 3 | RNVC: 2

14 Feb 1982

3040-01-128-4669
Spur Gearshaft

011284669
2046362-1: RNCC: 3 | RNVC: 2
2046362-1: RNCC: 5 | RNVC: 9
10106847: RNCC: 6 | RNVC: 9
2046362: RNCC: D | RNVC: 9

21 Mar 1982

3040-01-128-9355
Rigid Connecting Link

011289355
960348-1: RNCC: 3 | RNVC: 2
SR11928A: RNCC: 5 | RNVC: 9
10130521: RNCC: 6 | RNVC: 9
960348: RNCC: D | RNVC: 9

27 Mar 1982

3040-01-124-3862
Linear Actuating Cylinder Piston

011243862
2793718-101: RNCC: 3 | RNVC: 2
2793718-101: RNCC: 3 | RNVC: 9
2793718: RNCC: D | RNVC: 9

1 Jan 1982

3040-01-124-6159
Mechanical Drive Housing

011246159
181981-2: RNCC: 3 | RNVC: 2

9 Jan 1982

3040-01-124-7795
Straight Shaft

011247795
2589698: RNCC: 3 | RNVC: 2

12 Jan 1982

3040-01-125-7325
Bevel Gearshaft

011257325
64351-11029-105: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-7331
Spur Gearshaft

011257331
65391-11711-103: RNCC: 3 | RNVC: 2
65391-11711-102: RNCC: 5 | RNVC: 2

1 Feb 1982

3040-01-125-8358
Straight Shaft

011258358
65396-00017-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8848
Spur Gearshaft

011258848
64356-04014-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-9180
Spur Gearshaft

011259180
65393-04014-101: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-125-8926
Rigid Connecting Link

011258926
MBEU-66751: RNCC: 3 | RNVC: 2

1 Feb 1982

3040-01-126-1744
Brake Band And Lining

011261744
4674704-0002: RNCC: 3 | RNVC: 2
95-D-289-R: RNCC: 3 | RNVC: 2
520-4674704 ITEM 2: RNCC: D | RNVC: 9
520-4674704: RNCC: D | RNVC: 9

6 Feb 1982

3040-01-089-3085
Straight Shaft

010893085
162B8291: RNCC: 3 | RNVC: 2

30 Jan 1980

3040-01-088-3223
Remote Control Lever

010883223
70400-01610-042: RNCC: 3 | RNVC: 2
3040PL1950875: RNCC: 6 | RNVC: 9

11 Jan 1980

3040-01-086-3272
Spur Gearshaft

010863272
DAX12808: RNCC: 3 | RNVC: 2
12267963: RNCC: 3 | RNVC: 2

25 Nov 1979

3040-01-086-4179
Flexible Shaft Assembly Casing

010864179
5016 127: RNCC: 3 | RNVC: 2
NP 5016 127: RNCC: 5 | RNVC: 9
NP 5016 127: RNCC: C | RNVC: 1

28 Nov 1979

3040-01-088-7944
Mechanical Drive Housing

010887944
306734200: RNCC: 3 | RNVC: 2
3067342: RNCC: 5 | RNVC: 9
182858: RNCC: 5 | RNVC: 9

19 Jan 1980

3040-01-060-7236
Shouldered Shaft

010607236
GM7061: RNCC: 3 | RNVC: 2
L2903: RNCC: 5 | RNVC: 2
5905PL1646721: RNCC: 6 | RNVC: 9

29 May 1978

3040-01-063-5657
Rigid Connecting Link

010635657
12274450-1: RNCC: 3 | RNVC: 2
XM60214-1: RNCC: 5 | RNVC: 9

9 Aug 1978

3040-01-064-8863
Nonrotating Shaft Eye Bracket

010648863
A51084: RNCC: 3 | RNVC: 2

4 Sep 1978

3040-01-065-6136
Linear Actuating Cylinder Piston

010656136
12274438: RNCC: 3 | RNVC: 2
XM23132: RNCC: 5 | RNVC: 2

21 Sep 1978

3040-01-065-9133
Body Hub

010659133
12287333: RNCC: 3 | RNVC: 2
XM60292: RNCC: 5 | RNVC: 9
XM60292: RNCC: 5 | RNVC: 9
12274496: RNCC: 5 | RNVC: 9
3040010659133: RNCC: 6 | RNVC: 9

27 Sep 1978

3040-01-068-8580
Pawl

010688580
2362-S4: RNCC: 3 | RNVC: 2
292 050 J65: RNCC: 5 | RNVC: 9
459-218-030: RNCC: 5 | RNVC: 9
459-218-030: RNCC: 5 | RNVC: 9
200113ZPC325-38: RNCC: 5 | RNVC: 9
200113ZPC325-38: RNCC: 5 | RNVC: 9
292 050 J65: RNCC: C | RNVC: 1
292 050 J65: RNCC: C | RNVC: 1
200113Z: RNCC: D | RNVC: 9

5 Dec 1978

3040-01-069-4287
Nonrotating Shaft Eye Bracket

010694287
9D00647-1: RNCC: 3 | RNVC: 2
517049-1: RNCC: 5 | RNVC: 9

15 Dec 1978

3040-01-070-1225
Straight Shaft

010701225
16P1522-7: RNCC: 3 | RNVC: 2

3 Jan 1979

3040-01-070-3227
Mechanical Drive Housing

010703227
10888207: RNCC: 3 | RNVC: 2

10 Jan 1979

3040-01-070-9004
Shouldered Shaft

010709004
212601: RNCC: 3 | RNVC: 2
212601: RNCC: 5 | RNVC: 2
10050634: RNCC: 6 | RNVC: 9

24 Jan 1979

3040-01-072-8041
Shouldered Shaft

010728041
12283264: RNCC: 3 | RNVC: 2

4 Mar 1979

3040-01-073-0098
Shouldered Shaft

010730098
12267951: RNCC: 3 | RNVC: 2
DAX12077: RNCC: 5 | RNVC: 2

7 Mar 1979

3040-01-073-4339
Linear Actuating Cylinder Piston

010734339
12267111: RNCC: 3 | RNVC: 2
12267111: RNCC: 5 | RNVC: 2
1226711: RNCC: 5 | RNVC: 9
DAX11786: RNCC: 5 | RNVC: 9

15 Mar 1979

3040-01-073-9712
Hub Clamp

010739712
12287974: RNCC: 3 | RNVC: 2
12285297: RNCC: 5 | RNVC: 9

24 Mar 1979

3040-01-074-0670
Brake Shaft

010740670
8-52-95: RNCC: 3 | RNVC: 9
8-52T-07 ITEM 12: RNCC: 5 | RNVC: 9
8-52T07ITEM12: RNCC: 5 | RNVC: 9
8-52-95: RNCC: 5 | RNVC: 9

25 Mar 1979

3040-01-074-0602
Shouldered Shaft

010740602
11416-F-18B: RNCC: 3 | RNVC: 2
4X9H10X2: RNCC: 3 | RNVC: 9
PL-11156-F-18 ITEM 10: RNCC: 5 | RNVC: 2
PL-11156-F-18 ITEM10: RNCC: 5 | RNVC: 9
4X9H10X2: RNCC: 5 | RNVC: 9
F-4X9H10X2: RNCC: 5 | RNVC: 9

24 Mar 1979

3040-01-074-5987
Rigid Connecting Link

010745987
12265616: RNCC: 3 | RNVC: 2

4 Apr 1979

3040-01-075-9876
Starbo Bearing Shoe

010759876
400-4674852 ITEM 3: RNCC: 3 | RNVC: 2
4674852-0003: RNCC: 5 | RNVC: 2
400-4674852: RNCC: D | RNVC: 9

30 Apr 1979

3040-01-076-9293
Mechanical Drive Housing

010769293
12265806: RNCC: 3 | RNVC: 2
12265806: RNCC: 5 | RNVC: 9

16 May 1979

3040-01-077-4385
Rigid Connecting Link

010774385
4500-213: RNCC: 3 | RNVC: 2
68B618000-213: RNCC: 7 | RNVC: 2
4500: RNCC: D | RNVC: 9

23 May 1979

3040-01-077-5728
Remote Control Lever

010775728
LEVER #AC: RNCC: 3 | RNVC: 2
3224079 ITEM 48: RNCC: 5 | RNVC: 9
3017129: RNCC: 5 | RNVC: 9

26 May 1979

3040-01-079-1799
Straight Shaft

010791799
3801433: RNCC: 3 | RNVC: 2
MA280 21 000: RNCC: 3 | RNVC: 2
140297: RNCC: 5 | RNVC: 9

28 Jun 1979

3040-01-079-1795
Rigid Connecting Link

010791795
11579667: RNCC: 3 | RNVC: 2

28 Jun 1979

3040-01-079-4621
Flexible Drive Shaft

010794621
12267429: RNCC: 1 | RNVC: 2
23010682: RNCC: 3 | RNVC: 2
DAX12603: RNCC: 5 | RNVC: 2

7 Jul 1979

3040-01-081-2779
Rigid Connecting Link

010812779
70305-02119-042: RNCC: 3 | RNVC: 2

11 Aug 1979

3040-01-084-5726
Motor Pinion

010845726
23-03149-003: RNCC: 3 | RNVC: 9

22 Oct 1979

3040-01-086-1448
Mechanical Drive Housing

010861448
204244: RNCC: 3 | RNVC: 2
MA207-21118: RNCC: 5 | RNVC: 2

21 Nov 1979

3040-01-086-1449
Shaft Collar

010861449
3006343: RNCC: 3 | RNVC: 2
MA207-21389: RNCC: 5 | RNVC: 2

21 Nov 1979

3040-01-089-7772
Remote Control Lever

010897772
12524218: RNCC: 3 | RNVC: 2
465-4218: RNCC: 5 | RNVC: 2
465-4218: RNCC: 5 | RNVC: 9

7 Feb 1980

3040-01-090-9341
Rigid Connecting Link

010909341
12255972: RNCC: 3 | RNVC: 2

28 Feb 1980

3040-01-091-3842
Rigid Connecting Link

010913842
70400-02252: RNCC: 1 | RNVC: 2
70400-02252-123: RNCC: 3 | RNVC: 2
2004-1: RNCC: 5 | RNVC: 2
AS4-1000-123: RNCC: 5 | RNVC: 9
1100090-123: RNCC: 5 | RNVC: 9
SR11722A: RNCC: 5 | RNVC: 9
3040PL1938754: RNCC: 6 | RNVC: 9

7 Mar 1980

3040-01-091-3840
Rigid Connecting Link

010913840
70400-02252-121: RNCC: 1 | RNVC: 2
2001-1: RNCC: 3 | RNVC: 2
SR11720A: RNCC: 3 | RNVC: 2
1100060-121: RNCC: 5 | RNVC: 2
3040PL1967915: RNCC: 6 | RNVC: 9

7 Mar 1980

3040-01-091-6841
Shouldered Shaft

010916841
712184: RNCC: 3 | RNVC: 2

11 Mar 1980

3040-01-092-7991
Accumulator Cap

010927991
N1449: RNCC: 3 | RNVC: 2
1810-1290 ITEM 2: RNCC: 5 | RNVC: 2
1810-1290: RNCC: D | RNVC: 9

4 Apr 1980

3040-01-093-7364
Manual Control Lever

010937364
19-97-0150: RNCC: 3 | RNVC: 2
2641-809-40 ASSEMBLY A: RNCC: 3 | RNVC: 2
845-4558740 ITEM 64: RNCC: 5 | RNVC: 2
2642-785-05: RNCC: D | RNVC: 9
845-4558740: RNCC: D | RNVC: 9

23 Apr 1980

3040-01-094-9559
Rigid Connecting Link

010949559
12287446: RNCC: 1 | RNVC: 2
12287446: RNCC: 3 | RNVC: 2

20 May 1980

3040-01-095-8789
Nonrotating Shaft Eye Bracket

010958789
12296788: RNCC: 3 | RNVC: 2

9 Jun 1980

3040-01-096-5546
Rigid Connecting Link

010965546
70400-01250-042: RNCC: 1 | RNVC: 2
2014-1: RNCC: 3 | RNVC: 2
70400-01250-042: RNCC: 5 | RNVC: 2
70400-01250-042: RNCC: 5 | RNVC: 2
SR10985A: RNCC: 5 | RNVC: 2
70400-01250-042: RNCC: 5 | RNVC: 9
70400-0125: RNCC: 5 | RNVC: 9
70400-01250-042: RNCC: 5 | RNVC: 9
1100010-042: RNCC: 5 | RNVC: 9
70400-01250-042: RNCC: 5 | RNVC: 9

24 Jun 1980

3040-01-096-9223
Bevel Gearshaft

010969223
4645272-0011: RNCC: 3 | RNVC: 2
123-4645272 ITEM 11: RNCC: 5 | RNVC: 2
87547-1502 ITEM 11: RNCC: 5 | RNVC: 2
4845272-0011: RNCC: 5 | RNVC: 9
4645272-011: RNCC: 5 | RNVC: 9
87547-1502: RNCC: D | RNVC: 9
123-4645272: RNCC: D | RNVC: 9

30 Jun 1980

3040-01-097-3200
Rigid Connecting Link

010973200
12298748: RNCC: 3 | RNVC: 2

10 Jul 1980

3040-01-098-2315
Multiple Gears Gearshaft

010982315
12292366: RNCC: 3 | RNVC: 2

28 Jul 1980

3040-01-098-2496
Spur Gearshaft

010982496
26800156: RNCC: 3 | RNVC: 9
9240-003-56: RNCC: C | RNVC: 1

29 Jul 1980

3040-01-098-2902
Shaft Retaining Plate

010982902
1362080G1: RNCC: 3 | RNVC: 9
1362080G1: RNCC: 5 | RNVC: 2
125-1-5: RNCC: C | RNVC: 1

29 Jul 1980

3040-01-101-5631
Gear Shaft

011015631
8348-25: RNCC: 3 | RNVC: 2

3 Oct 1980

3040-01-101-1576
Shouldered Shaft

011011576
RE-B102131: RNCC: 3 | RNVC: 2
ASC1539000: RNCC: 5 | RNVC: 9

20 Sep 1980

3040-01-102-6080
Shouldered Shaft

011026080
70209-01006-102: RNCC: 3 | RNVC: 2
70209-01006-101: RNCC: 5 | RNVC: 9
3040PL2093190: RNCC: 6 | RNVC: 9
70209-01006: RNCC: D | RNVC: 9

23 Oct 1980

3040-01-102-8203
Rigid Connecting Link

011028203
12280575-1: RNCC: 3 | RNVC: 2
3040011028203: RNCC: 6 | RNVC: 9
12280575: RNCC: D | RNVC: 9

29 Oct 1980

3040-01-103-3409
Linear Actuating Cylinder Assembly

011033409
RW-53: RNCC: 3 | RNVC: 2
6845-3336-47: RNCC: 5 | RNVC: 9
RW-53: RNCC: 5 | RNVC: 9
6845-3336: RNCC: D | RNVC: 9

12 Nov 1980

3040-01-104-6115
Shouldered Shaft

011046115
8067-79: RNCC: 3 | RNVC: 2
8067-79: RNCC: 5 | RNVC: 9

6 Dec 1980

3040-01-106-7810
Nonrotating Shaft Eye Bracket

011067810
12297750: RNCC: 3 | RNVC: 2

25 Jan 1981

3040-01-108-5036
Control Cam

011085036
12299569: RNCC: 3 | RNVC: 2
10085828: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-5332
Remote Control Lever

011085332
12299123: RNCC: 3 | RNVC: 2
12299123: RNCC: 5 | RNVC: 2
10085833: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-5339
Remote Control Lever

011085339
12299140: RNCC: 3 | RNVC: 2
12299140: RNCC: 5 | RNVC: 9
10085839: RNCC: 6 | RNVC: 9

1 Mar 1981

3040-01-108-7030
Shouldered Shaft

011087030
01-435-0157-5PIECE 136: RNCC: 3 | RNVC: 2
60-305-0006-2: RNCC: 5 | RNVC: 2
01-435-0157-5PIECE 136: RNCC: 5 | RNVC: 9
60-305-0006-2: RNCC: 5 | RNVC: 9

4 Mar 1981

3040-01-109-2046
Straight Shaft

011092046
11628313: RNCC: 3 | RNVC: 2
11628313: RNCC: 5 | RNVC: 2
10395809: RNCC: 6 | RNVC: 9

12 Mar 1981

3040-01-109-7915
Linear Actuating Cylinder Cap

011097915
28920: RNCC: 3 | RNVC: 2
895-28365 ITEM 7: RNCC: 5 | RNVC: 2
895-28365: RNCC: D | RNVC: 9

21 Mar 1981

3040-01-110-3947
Rigid Connecting Link

011103947
2600129-2: RNCC: 3 | RNVC: 2
2600129-2: RNCC: 5 | RNVC: 2

30 Mar 1981

3040-01-111-1557
Manual Control Lever

011111557
18-2300-1: RNCC: 3 | RNVC: 2
18-1500-2: RNCC: 5 | RNVC: 2
61078-2: RNCC: 5 | RNVC: 2
3040PL0809315: RNCC: 6 | RNVC: 9
16VP043-100: RNCC: D | RNVC: 9

12 Apr 1981

3040-01-112-1922
Push-Pull Control Assembly

011121922
21H120: RNCC: 3 | RNVC: 2
B48701-0216.0 WITH B42978-08A: RNCC: 5 | RNVC: 2
B48701-0216.0 WITH B42978-08A: RNCC: 5 | RNVC: 9
21H120-A: RNCC: D | RNVC: 9

29 Apr 1981

3040-01-113-4587
Worm Shaft

011134587
K472: RNCC: 3 | RNVC: 9
TU23: RNCC: 5 | RNVC: 9

27 May 1981

3040-01-113-9706
Ball Joint

011139706
580520-1: RNCC: 3 | RNVC: 2
580520-1: RNCC: 5 | RNVC: 2
580520-1: RNCC: 5 | RNVC: 9

7 Jun 1981

3040-01-114-0181
Rigid Connecting Link

011140181
810-2178000-6 ITEM 20: RNCC: 3 | RNVC: 2
810-2178000-1 ITEM 98: RNCC: 5 | RNVC: 2
810-2178000: RNCC: D | RNVC: 9

7 Jun 1981

3040-01-112-6829
Shouldered Shaft

011126829
3365777-1: RNCC: 3 | RNVC: 2
3365777-1: RNCC: 5 | RNVC: 9
3365777-1: RNCC: 5 | RNVC: 9

8 May 1981

3040-01-114-7720
Rigid Connecting Link

011147720
12299311: RNCC: 3 | RNVC: 2
10085855: RNCC: 6 | RNVC: 9

22 Jun 1981

3040-01-114-8516
Spline Adapter

011148516
21C4382G01: RNCC: 3 | RNVC: 2

24 Jun 1981

3040-01-114-7246
Control Cam

011147246
P1-9: RNCC: 3 | RNVC: 2
ETS-A1-9: RNCC: 3 | RNVC: 2
JD-3P: RNCC: 5 | RNVC: 9
ETS-A1-9: RNCC: 5 | RNVC: 9

21 Jun 1981

3040-01-115-5990
Straight Shaft

011155990
A6-32: RNCC: 3 | RNVC: 2
933C055431-2: RNCC: 5 | RNVC: 9
055431-2: RNCC: 7 | RNVC: 2

10 Jul 1981

3040-01-116-1552
Mechanical Drive Housing

011161552
209F385: RNCC: 3 | RNVC: 2
10106773: RNCC: 6 | RNVC: 9

21 Jul 1981

3040-01-116-3300
Linear Actuating Cylinder Assembly

011163300
A-627: RNCC: 3 | RNVC: 2

25 Jul 1981

3040-01-117-1292
Outboard Fitting

011171292
12011828-1: RNCC: 3 | RNVC: 2
70751-02019-103: RNCC: 5 | RNVC: 9

9 Aug 1981

3040-01-117-1362
Shouldered Shaft

011171362
114S1863-7: RNCC: 3 | RNVC: 2

9 Aug 1981

3040-01-117-0311
Spur Gearshaft

011170311
12524098: RNCC: 3 | RNVC: 2
465-4098: RNCC: 5 | RNVC: 1
COH-62812: RNCC: 5 | RNVC: 2

7 Aug 1981

3040-01-117-4428
Brake Disc

011174428
AS-134522: RNCC: 3 | RNVC: 2
AS-134522: RNCC: 5 | RNVC: 9
AS-134522: RNCC: 5 | RNVC: 9

11 Mar 2003

3040-01-117-6897
Counterbalance Weight

011176897
3556943-4: RNCC: 3 | RNVC: 2
3556943-4: RNCC: 5 | RNVC: 2
3556943: RNCC: D | RNVC: 9

20 Aug 1981

3040-01-117-7359
Rigid Connecting Link

011177359
145C3340-8: RNCC: 3 | RNVC: 2
145C3340-8: RNCC: 5 | RNVC: 2

21 Aug 1981

Load More Results