What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 135 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 135of 575

3040-01-229-9035
Linear Actuating Cylinder Assembly

012299035
1H2H0A00092483: RNCC: 3 | RNVC: 2
2 1/2CBB-2HLTVS13CX4.125: RNCC: 5 | RNVC: 9
AG146146A0: RNCC: 5 | RNVC: 9

6 Apr 1986

3040-01-235-0574
Thrust Collar

012350574
5766744A-0031: RNCC: 3 | RNVC: 2
5766744-0031: RNCC: 3 | RNVC: 9
5766744 ITEM 31: RNCC: 5 | RNVC: 2
5766744 ITEM 31: RNCC: C | RNVC: 1

24 Jun 1986

3040-01-235-3626
Coupling Sleeve

012353626
2296671: RNCC: 3 | RNVC: 2
149918: RNCC: 5 | RNVC: 9

28 Jun 1986

3040-01-237-1812
Sliding Shoe

012371812
5561: RNCC: 3 | RNVC: 2
5561PB: RNCC: C | RNVC: 1

26 Jul 1986

3040-01-237-0471
Remote Control Lever

012370471
406 254 01 08: RNCC: 3 | RNVC: 2
406 254 01 08: RNCC: 5 | RNVC: 2
406 254 01 08: RNCC: 5 | RNVC: 9

24 Jul 1986

3040-01-233-1846
Mechanical Drive Housing

012331846
83-14777: RNCC: 3 | RNVC: 2
1013802: RNCC: 3 | RNVC: 2
83-14777: RNCC: 3 | RNVC: 9
83-14777: RNCC: 5 | RNVC: 9
83-14777: RNCC: 5 | RNVC: 9
83-14777: RNCC: 5 | RNVC: 9
83-14777: RNCC: 5 | RNVC: 9

28 May 1986

NSN 3040-01-237-7045 012377045 CYLINDER,ACTUATING,LINEAR

3040-01-237-7045
Linear Actuating Cylinder

012377045
RC-57: RNCC: 3 | RNVC: 2
R57: RNCC: 5 | RNVC: 2
A430601000031: RNCC: 5 | RNVC: 2
RC-5-SA-7: RNCC: 5 | RNVC: 2
19009A0600: RNCC: 5 | RNVC: 2
HSR-57T: RNCC: 5 | RNVC: 9
82A5052A0503: RNCC: 7 | RNVC: 2
82A5052A0500: RNCC: D | RNVC: 9

5 Aug 1986

3040-01-239-1847
Rotating Shaft Eye Bracket

012391847
12350165: RNCC: 3 | RNVC: 2

26 Aug 1986

3040-01-239-7517
Friction Lining

012397517
DVP0020: RNCC: 3 | RNVC: 2
D-405248-24: RNCC: 5 | RNVC: 9
D-405248-24: RNCC: 5 | RNVC: 9

4 Sep 1986

3040-01-239-3683
Straight Shaft

012393683
64A98B172-1: RNCC: 3 | RNVC: 9
64A98B172-1: RNCC: 5 | RNVC: 2

28 Aug 1986

3040-01-240-3315
Straight Shaft

012403315
7002540: RNCC: 3 | RNVC: 2
7002540: RNCC: 5 | RNVC: 2
10106979: RNCC: 6 | RNVC: 9

12 Sep 1986

3040-01-241-5567
Control Cam

012415567
DS-842678: RNCC: 3 | RNVC: 2
842678: RNCC: 5 | RNVC: 2
DS-842678: RNCC: 5 | RNVC: 2
842678: RNCC: D | RNVC: 9

27 Sep 1986

3040-01-241-4694
Straight Shaft

012414694
17741700: RNCC: 3 | RNVC: 2
177417: RNCC: 5 | RNVC: 9

26 Sep 1986

3040-01-242-7948
Linear Actuating Cylinder Piston

012427948
13211E3016: RNCC: 3 | RNVC: 2

17 Oct 1986

3040-01-243-8855
Housing Adapter

012438855
42312-157: RNCC: 3 | RNVC: 2
42312R157: RNCC: 5 | RNVC: 9
10130540: RNCC: 6 | RNVC: 9

2 Nov 1986

3040-01-244-0164
Manual Control Lever

012440164
315 581 00 03: RNCC: 3 | RNVC: 2
315 581 00 03: RNCC: 5 | RNVC: 2
315 581 00 03: RNCC: 5 | RNVC: 9

5 Nov 1986

3040-01-246-5544
Shouldered Shaft

012465544
742099: RNCC: 3 | RNVC: 2

15 Dec 1986

3040-01-246-3302
Control Cam

012463302
363515: RNCC: 3 | RNVC: 2
363515: RNCC: C | RNVC: 1

12 Dec 1986

3040-01-247-5489
Straight Shaft

012475489
2370-0096-1: RNCC: 3 | RNVC: 9
B11405 FIND 47: RNCC: 5 | RNVC: 9
2370-0096-1: RNCC: C | RNVC: 1
B11405: RNCC: D | RNVC: 9

8 Jan 1987

3040-01-248-3888
Shouldered Shaft

012483888
609152-50-RA: RNCC: 3 | RNVC: 9
609152-50-RA: RNCC: C | RNVC: 1

23 Jan 1987

3040-01-249-0147
Remote Control Lever

012490147
2666423: RNCC: 3 | RNVC: 2

4 Feb 1987

3040-01-249-1975
Manual Control Lever

012491975
3163817-1: RNCC: 3 | RNVC: 2
3163817-1: RNCC: 5 | RNVC: 9

7 Feb 1987

3040-01-249-1514
Rigid Connecting Link

012491514
4501-269: RNCC: 3 | RNVC: 2
68B418000-269: RNCC: 3 | RNVC: 2
68B418000-269: RNCC: 5 | RNVC: 9
68B418000: RNCC: D | RNVC: 9

6 Feb 1987

3040-01-249-6139
Brake Disc

012496139
27921: RNCC: 3 | RNVC: 2
27921: RNCC: 3 | RNVC: 9
27921: RNCC: 5 | RNVC: 2
27921: RNCC: 5 | RNVC: 2
27921: RNCC: 5 | RNVC: 2

13 Feb 1987

3040-01-249-9193
Manual Control Lever

012499193
51410B200: RNCC: 3 | RNVC: 2
51410B200: RNCC: 5 | RNVC: 9

20 Feb 1987

3040-01-249-6892
Rigid Connecting Link

012496892
48100225: RNCC: 3 | RNVC: 2
48100224: RNCC: 3 | RNVC: 9
90054188: RNCC: 5 | RNVC: 9
900541881: RNCC: C | RNVC: 1

14 Feb 1987

3040-01-250-4226
Shouldered Shaft

012504226
604983-86-R: RNCC: 3 | RNVC: 9
604983-86-R: RNCC: C | RNVC: 1

1 Mar 1987

3040-01-250-6134
Shouldered Shaft

012506134
L5875044-003: RNCC: 3 | RNVC: 2
L5875044-003: RNCC: 5 | RNVC: 9

4 Mar 1987

3040-01-251-1707
Shaft Collar

012511707
2SSC50: RNCC: 3 | RNVC: 2

14 Mar 1987

3040-01-251-3192
Rigid Connecting Link

012513192
5120470: RNCC: 3 | RNVC: 2

17 Mar 1987

3040-01-186-1569
Shaft Assembly

011861569
2048098-5-1: RNCC: 3 | RNVC: 9
2048098-5-1: RNCC: 5 | RNVC: 2
2048098-5-1: RNCC: 5 | RNVC: 9
10333178: RNCC: 6 | RNVC: 9

8 Aug 1984

3040-01-187-7278
Rigid Connecting Link

011877278
4900-119: RNCC: 3 | RNVC: 2
B889100-119: RNCC: 3 | RNVC: 2
75J618002-119: RNCC: 5 | RNVC: 2
75B618002-119: RNCC: 7 | RNVC: 2
4900: RNCC: D | RNVC: 9

24 Aug 1984

3040-01-187-3125
Counterbalance Weight

011873125
301-315-626-0: RNCC: 3 | RNVC: 2
301-315-626-0: RNCC: 3 | RNVC: 9
301-315-626-0: RNCC: 5 | RNVC: 2

21 Aug 1984

3040-01-188-3261
Counterbalance Weight

011883261
21201: RNCC: 3 | RNVC: 2
5305011883261: RNCC: 6 | RNVC: 9

1 Sep 1984

3040-01-188-3514
Linear Actuating Cylinder

011883514
895-27665 ITEM 7: RNCC: 3 | RNVC: 2
27132: RNCC: 5 | RNVC: 2
895-27665: RNCC: D | RNVC: 9

2 Sep 1984

3040-01-188-3234
Straight Shaft

011883234
12338449: RNCC: 3 | RNVC: 2
5583602: RNCC: 5 | RNVC: 9
5583602-C: RNCC: 5 | RNVC: 9

1 Sep 1984

3040-01-189-1064
Remote Control Lever

011891064
5583589: RNCC: 3 | RNVC: 2
12338443: RNCC: 3 | RNVC: 2

11 Sep 1984

3040-01-189-4369
Pawl-Shaft Assembly

011894369
12524076: RNCC: 3 | RNVC: 2
465-4076: RNCC: 5 | RNVC: 2
465-4076: RNCC: 5 | RNVC: 9

15 Sep 1984

3040-01-189-6591
Piston Ring

011896591
250218: RNCC: 3 | RNVC: 2
250218: RNCC: 5 | RNVC: 2
240293: RNCC: 5 | RNVC: 9
240293: RNCC: 5 | RNVC: 9
250218: RNCC: 5 | RNVC: 9

18 Sep 1984

3040-01-190-7779
Rigid Connecting Link

011907779
75A427111-1001: RNCC: 3 | RNVC: 9
75A427111-1001: RNCC: 5 | RNVC: 2

1 Oct 1984

3040-01-191-3861
Mechanical Drive Housing

011913861
21337800: RNCC: 3 | RNVC: 2
213378: RNCC: 5 | RNVC: 9

7 Oct 1984

3040-01-191-4158
Straight Shaft

011914158
63-E-34 PIECE 5: RNCC: 3 | RNVC: 2

7 Oct 1984

3040-01-190-3396
Shaft Assembly Gear

011903396
3132920250: RNCC: 3 | RNVC: 2
20-7: RNCC: 3 | RNVC: 2
3132920250: RNCC: 5 | RNVC: 2
PD1135M-3-20: RNCC: 5 | RNVC: 9

26 Sep 1984

3040-01-192-0849
Counterbalance Weight

011920849
301-315-627-0: RNCC: 3 | RNVC: 2

16 Oct 1984

3040-01-188-1926
Linear Actuating Cylinder

011881926
026376: RNCC: 3 | RNVC: 2
E4149PC12: RNCC: 5 | RNVC: 9
E-3673-1: RNCC: 5 | RNVC: 9
E-3382 PIECE 12: RNCC: 5 | RNVC: 9
026368: RNCC: 5 | RNVC: 9
E-3382: RNCC: D | RNVC: 9

31 Aug 1984

3040-01-192-9759
Manual Control Lever

011929759
L59089: RNCC: 3 | RNVC: 2

28 Oct 1984

3040-01-193-4609
Reducing Wormshaft

011934609
637/25/1 SDC: RNCC: 3 | RNVC: 2
RW1/820358 PC 1: RNCC: 5 | RNVC: 2

3 Nov 1984

3040-01-193-6782
Rigid Connecting Link

011936782
12284660: RNCC: 3 | RNVC: 2

6 Nov 1984

3040-01-194-0314
Push-Pull Control Assembly

011940314
8342-2: RNCC: 3 | RNVC: 2
35360239: RNCC: 5 | RNVC: 2

9 Nov 1984

3040-01-194-0955
Shouldered Shaft

011940955
242792: RNCC: 3 | RNVC: 2
242792: RNCC: 5 | RNVC: 2
242792: RNCC: 5 | RNVC: 9

10 Nov 1984

3040-01-194-4950
Counterbalance Weight

011944950
LA91248: RNCC: 3 | RNVC: 9
121301-6.3: RNCC: 5 | RNVC: 9
121301-6.3: RNCC: 5 | RNVC: 9
121301-6.3: RNCC: C | RNVC: 1
91248: RNCC: C | RNVC: 1
121301-6.3: RNCC: C | RNVC: 1
LA91248: RNCC: C | RNVC: 1

14 Nov 1984

3040-01-194-0956
Hub Clamp

011940956
3084221-1: RNCC: 3 | RNVC: 2

10 Nov 1984

3040-01-194-2147
Rigid Connecting Link

011942147
75A613378-2002: RNCC: 3 | RNVC: 2
75A613378: RNCC: D | RNVC: 9

10 Nov 1984

3040-01-195-4173
Remote Control Lever

011954173
12339451-1: RNCC: 3 | RNVC: 2
5584265: RNCC: 5 | RNVC: 9
5342PL0814093: RNCC: 6 | RNVC: 9
5584265-D: RNCC: D | RNVC: 9

28 Nov 1984

3040-01-195-7823
Shouldered Shaft

011957823
58452U: RNCC: 3 | RNVC: 2

3 Dec 1984

3040-01-196-7677
Body Hub

011967677
AJ10A114: RNCC: 3 | RNVC: 2
AJ10-2: RNCC: 3 | RNVC: 9
AJ10-2: RNCC: 5 | RNVC: 9
AJ10: RNCC: D | RNVC: 9

14 Dec 1984

3040-01-198-0959
Rigid Connecting Link

011980959
PDG7810: RNCC: 3 | RNVC: 2
PDG7810: RNCC: 3 | RNVC: 9

4 Jan 1985

3040-01-198-2223
Detent Plate

011982223
172B4026P1: RNCC: 3 | RNVC: 2

5 Jan 1985

3040-01-199-0622
Control Cam

011990622
172B4029G1: RNCC: 3 | RNVC: 2

17 Jan 1985

3040-01-198-9171
Counterbalance Weight

011989171
1304M79P01: RNCC: 3 | RNVC: 2

15 Jan 1985

3040-01-199-5438
Straight Shaft

011995438
12288106: RNCC: 3 | RNVC: 2

23 Jan 1985

3040-01-199-6587
Straight Shaft

011996587
6-810-001917: RNCC: 3 | RNVC: 2
6-810-001917: RNCC: 5 | RNVC: 2
2CD726: RNCC: 5 | RNVC: 2
6-810-001917: RNCC: 5 | RNVC: 2
CD726: RNCC: 5 | RNVC: 9
2CD726: RNCC: 5 | RNVC: 9

24 Jan 1985

3040-01-200-0859
Straight Shaft

012000859
WLM290057: RNCC: 3 | RNVC: 2
290057: RNCC: 5 | RNVC: 2
2CK18: RNCC: 5 | RNVC: 2
290057: RNCC: 5 | RNVC: 2
2CK18: RNCC: 5 | RNVC: 9
290057: RNCC: 5 | RNVC: 9
9-734-100631: RNCC: 5 | RNVC: 9

30 Jan 1985

3040-01-201-1083
Shouldered Shaft

012011083
2301107: RNCC: 3 | RNVC: 9
2301107: RNCC: C | RNVC: 1

12 Feb 1985

3040-01-201-9668
Counterbalance Weight

012019668
70128-301-1: RNCC: 3 | RNVC: 2
70128-301-1: RNCC: 5 | RNVC: 2

26 Feb 1985

3040-01-202-2070
Straight Shaft

012022070
897447-9: RNCC: 3 | RNVC: 2

27 Feb 1985

3040-01-202-8639
Ball Joint

012028639
SPM5S: RNCC: 3 | RNVC: 2
6Q200-D3: RNCC: 5 | RNVC: 2
6Q200-D0: RNCC: D | RNVC: 9

7 Mar 1985

3040-01-205-2182
Throttle Valve Shaft

012052182
NL809-1: RNCC: 3 | RNVC: 9
S-1059 PIECE 54: RNCC: 5 | RNVC: 9
S-1059: RNCC: D | RNVC: 9

5 Apr 1985

3040-01-205-8789
Linear Actuating Cylinder

012058789
4T0335: RNCC: 3 | RNVC: 2
4T335: RNCC: D | RNVC: 9

12 Apr 1985

3040-01-206-0027
Shaft Retaining Plate

012060027
12316157: RNCC: 3 | RNVC: 2

12 Apr 1985

3040-01-206-6164
Shouldered Shaft

012066164
458-52294-1: RNCC: 3 | RNVC: 2
458-52294: RNCC: D | RNVC: 9

20 Apr 1985

3040-01-206-9200
Rigid Connecting Link

012069200
74A410576-1004: RNCC: 3 | RNVC: 2
74A410576-1004: RNCC: 3 | RNVC: 2
74A410576-1004: RNCC: 5 | RNVC: 2
74A410576-1004: RNCC: 5 | RNVC: 2
74A410576-1004: RNCC: 5 | RNVC: 2
74A410576-1004: RNCC: 5 | RNVC: 2
74A410576-1004: RNCC: 5 | RNVC: 2
74A410576-1004: RNCC: 5 | RNVC: 2
74A410576-1004: RNCC: 5 | RNVC: 9
74A410576-1004: RNCC: 5 | RNVC: 9

24 Apr 1985

3040-01-207-4678
Shouldered Shaft

012074678
14HM10X3: RNCC: 3 | RNVC: 2
249783E: RNCC: 3 | RNVC: 2
14HM10X3: RNCC: 3 | RNVC: 9
249783: RNCC: 5 | RNVC: 9
W-249792 PIECE 10: RNCC: 5 | RNVC: 9
X-14HM10X3: RNCC: 5 | RNVC: 9

1 May 1985

3040-01-207-9629
Shouldered Shaft

012079629
3574-033: RNCC: 3 | RNVC: 2
89015-26 SN2352533: RNCC: 5 | RNVC: 2
9988-741 ITEM 70: RNCC: 5 | RNVC: 2
9988-741: RNCC: D | RNVC: 9

8 May 1985

3040-01-207-8026
Inner Rotor Shaft Assembly

012078026
014316-1: RNCC: 3 | RNVC: 2
014316-1: RNCC: 3 | RNVC: 9

5 May 1985

3040-01-209-1979
Push-Pull Control Assembly

012091979
0790-0020-5: RNCC: 3 | RNVC: 2
0790-0020-5: RNCC: 5 | RNVC: 2
0790-0020-5: RNCC: 5 | RNVC: 9
0790-0020-5: RNCC: 5 | RNVC: 9

25 May 1985

3040-01-209-3410
Manual Control Lever

012093410
AV-1520: RNCC: 3 | RNVC: 9
583: RNCC: 5 | RNVC: 9
V-1507 AND V-1508 LETTER V: RNCC: 5 | RNVC: 9
V-1507: RNCC: D | RNVC: 9

29 May 1985

3040-01-209-3840
Straight Shaft

012093840
NF203077-1: RNCC: 3 | RNVC: 2
NF203077-1: RNCC: 5 | RNVC: 9

29 May 1985

3040-01-209-5128
Manual Control Lever

012095128
101161PS: RNCC: 3 | RNVC: 2
2BF573: RNCC: 5 | RNVC: 2
101161: RNCC: 5 | RNVC: 9
2BF573: RNCC: 5 | RNVC: 9
131523: RNCC: D | RNVC: 9

31 May 1985

3040-01-210-6595
Rigid Connecting Link

012106595
70500-02151-102: RNCC: 3 | RNVC: 2
70500-02151-102: RNCC: 5 | RNVC: 2
70500-02151: RNCC: D | RNVC: 9

15 Jun 1985

3040-01-212-6391
Shouldered Shaft

012126391
08-3800-09(21A): RNCC: 3 | RNVC: 2
21A: RNCC: 5 | RNVC: 9

16 Jul 1985

3040-01-212-8991
Control Cam

012128991
751574-1-1: RNCC: 3 | RNVC: 2

19 Jul 1985

3040-01-213-7584
Shouldered Shaft

012137584
48NA-757-4: RNCC: 3 | RNVC: 2
48NA-757-4: RNCC: 5 | RNVC: 9

30 Jul 1985

3040-01-214-3922
Linear Actuating Cylinder Piston Rod

012143922
6-768-001740: RNCC: 3 | RNVC: 2
2CT202: RNCC: 5 | RNVC: 2
2CT202: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-214-3841
Shouldered Shaft

012143841
29510170: RNCC: 3 | RNVC: 2
23018105: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-214-3952
Rigid Connecting Link

012143952
6-768-001844: RNCC: 3 | RNVC: 2
2CT203: RNCC: 5 | RNVC: 2
2CT203: RNCC: 5 | RNVC: 9
6-294-006045: RNCC: D | RNVC: 9

9 Aug 1985

3040-01-216-0425
Disk Brake Shoe

012160425
4620149: RNCC: 3 | RNVC: 2

6 Sep 1985

3040-01-216-1944
Inner Clutch Shaft

012161944
4100638-1: RNCC: 3 | RNVC: 2
4100638-1: RNCC: 5 | RNVC: 9

7 Sep 1985

3040-01-216-8141
Linear Actuating Cylinder Assembly

012168141
8960-L: RNCC: 3 | RNVC: 2
8960-L: RNCC: 3 | RNVC: 9

17 Sep 1985

3040-01-217-7931
Control Cam

012177931
3825070: RNCC: 3 | RNVC: 2
3825070: RNCC: 5 | RNVC: 2

3 Oct 1985

3040-01-218-8039
Shouldered Shaft

012188039
1721B14: RNCC: 3 | RNVC: 2

18 Oct 1985

3040-01-218-8268
Brake Disc

012188268
MLK-ABK1: RNCC: 3 | RNVC: 2
ML50K855A: RNCC: 3 | RNVC: 9
ML50K-855A: RNCC: 5 | RNVC: 2
MLK-ABK1: RNCC: 5 | RNVC: 9
ML50K-855A: RNCC: 5 | RNVC: 9

19 Oct 1985

3040-01-219-1551
Counterbalance Weight

012191551
8019129-023: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-220-7793
Rigid Connecting Link

012207793
MD31623-3047: RNCC: 3 | RNVC: 2
MD31623-3047: RNCC: 5 | RNVC: 2
MD31623-3047: RNCC: 5 | RNVC: 9
MD31623-3047: RNCC: 5 | RNVC: 9
MD31623-3047: RNCC: 5 | RNVC: 9

19 Nov 1985

3040-01-221-8947
Linear Actuating Cylinder Assembly

012218947
5771SK: RNCC: 3 | RNVC: 9
B-5771SK: RNCC: 5 | RNVC: 9

5 Dec 1985

3040-01-222-1835
Counterbalance Weight

012221835
8019131-008: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-222-1836
Counterbalance Weight

012221836
8019131-009: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-222-1841
Counterbalance Weight

012221841
8019131-014: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-222-9438
Shouldered Shaft

012229438
2670127: RNCC: 3 | RNVC: 2
2670127: RNCC: 5 | RNVC: 2

20 Dec 1985

3040-01-222-9718
Nonrotating Shaft Eye Bracket

012229718
1447160: RNCC: 3 | RNVC: 2
1447160: RNCC: 5 | RNVC: 9

20 Dec 1985

3040-01-223-0947
Spur Gearshaft

012230947
460-224-002: RNCC: 3 | RNVC: 2
460-224-002: RNCC: 5 | RNVC: 1
460-224-001: RNCC: D | RNVC: 9

21 Dec 1985

3040-01-223-1617
Shouldered Shaft

012231617
2226050-7: RNCC: 3 | RNVC: 2
2226050-7: RNCC: 5 | RNVC: 1
2226050-7: RNCC: 5 | RNVC: 9

23 Dec 1985

3040-01-225-2502
Remote Control Lever

012252502
723680: RNCC: 3 | RNVC: 2
723680: RNCC: 5 | RNVC: 9
723680: RNCC: 5 | RNVC: 9

30 Jan 1986

3040-01-225-7028
Linear Actuating Cylinder Assembly

012257028
AG145307D0: RNCC: 3 | RNVC: 2

6 Feb 1986

3040-01-224-9269
Remote Control Lever

012249269
2670036: RNCC: 3 | RNVC: 2

24 Jan 1986

3040-01-225-1783
Control Cam

012251783
68A582026-2011: RNCC: 3 | RNVC: 2

29 Jan 1986

3040-01-226-4841
Straight Shaft

012264841
83-14884: RNCC: 3 | RNVC: 2
83-14884: RNCC: 5 | RNVC: 2
83-14884: RNCC: 5 | RNVC: 2
83-14884: RNCC: 5 | RNVC: 9
83-14884: RNCC: 5 | RNVC: 9

19 Feb 1986

3040-01-226-7391
Remote Control Lever

012267391
31772969: RNCC: 3 | RNVC: 2
31772969: RNCC: 5 | RNVC: 9

21 Feb 1986

3040-01-226-6731
Shouldered Shaft

012266731
60244-40104: RNCC: 3 | RNVC: 2

21 Feb 1986

3040-01-227-7605
Shouldered Shaft

012277605
5191208-3: RNCC: 3 | RNVC: 2
5191208-3: RNCC: D | RNVC: 9

7 Mar 1986

3040-01-227-8895
Detent Plate

012278895
12355565: RNCC: 3 | RNVC: 2

12 Mar 1986

3040-01-229-1340
Control Cam

012291340
70219-01030-108: RNCC: 3 | RNVC: 2

26 Mar 1986

3040-01-229-4036
Remote Control Lever

012294036
12313390: RNCC: 3 | RNVC: 2
12313390: RNCC: 8 | RNVC: 1

31 Mar 1986

3040-01-229-4535
Shouldered Shaft

012294535
1395AS277: RNCC: 3 | RNVC: 2

2 Apr 1986

3040-01-230-0797
Shouldered Shaft

012300797
83-14972: RNCC: 3 | RNVC: 2
83-14972: RNCC: 5 | RNVC: 2
83-14972: RNCC: 5 | RNVC: 2
83-14972: RNCC: 5 | RNVC: 9
83-14972: RNCC: 5 | RNVC: 9

9 Apr 1986

3040-01-230-5078
Bell Crank

012305078
4F61185-105A: RNCC: 3 | RNVC: 2

14 Apr 1986

3040-01-231-1704
Straight Shaft

012311704
60244-40815-1: RNCC: 3 | RNVC: 2

24 Apr 1986

3040-01-232-2462
Linear Actuating Cylinder Assembly Parts Kit

012322462
2CT277: RNCC: 3 | RNVC: 2
19021-607: RNCC: 5 | RNVC: 9
2CT277: RNCC: 5 | RNVC: 9

9 May 1986

3040-01-233-8487
Control Cam

012338487
72A356468-2003: RNCC: 3 | RNVC: 2

4 Jun 1986

3040-01-234-5318
Paper-Assy Of Shaft

012345318
03-03782-001: RNCC: 3 | RNVC: 2

16 Jun 1986

3040-01-235-3529
Bell Crank

012353529
D114703-1: RNCC: 3 | RNVC: 2
D114703-1: RNCC: 5 | RNVC: 2
D114703-1: RNCC: 5 | RNVC: 9
D114703-1: RNCC: 5 | RNVC: 9

27 Jun 1986

3040-01-235-7940
Shaft Collar

012357940
S-2726-20: RNCC: 3 | RNVC: 2
6432K25: RNCC: 5 | RNVC: 2

6 Jul 1986

3040-01-236-6064
Linear Actuating Cylinder Assembly

012366064
GG094619C0: RNCC: 3 | RNVC: 2
2 1/2CFH-2HLTS13CX82: RNCC: 5 | RNVC: 9

18 Jul 1986

3040-01-233-7352
Guide Rod

012337352
106037017: RNCC: 3 | RNVC: 2
106037017VM: RNCC: 5 | RNVC: 2

1 Jun 1986

3040-01-238-7013
Shaft Collar

012387013
3A008-0355: RNCC: 3 | RNVC: 2
3A008-0355: RNCC: 5 | RNVC: 2

19 Aug 1986

3040-01-240-5707
Bell Crank

012405707
65415-11351-043: RNCC: 3 | RNVC: 2

15 Sep 1986

3040-01-243-4758
Manual Control Lever

012434758
032778-002: RNCC: 3 | RNVC: 2
D32778-2: RNCC: 5 | RNVC: 9
D32778-2: RNCC: 5 | RNVC: 9
32778-002: RNCC: C | RNVC: 1

28 Oct 1986

3040-01-241-3160
Linear Actuating Cylinder Assembly

012413160
079439-0000: RNCC: 3 | RNVC: 2

24 Sep 1986

3040-01-243-8038
Rigid Connecting Link

012438038
6-74174: RNCC: 3 | RNVC: 2

31 Oct 1986

3040-01-244-1852
Shouldered Shaft

012441852
738283: RNCC: 3 | RNVC: 2

7 Nov 1986

3040-01-244-0101
Shouldered Shaft

012440101
99132582: RNCC: 3 | RNVC: 2
32582: RNCC: 5 | RNVC: 9

5 Nov 1986

3040-01-245-0593
Straight Shaft

012450593
192B5424AD1: RNCC: 3 | RNVC: 2
119D3921-8: RNCC: 3 | RNVC: 2

23 Nov 1986

3040-01-246-5173
Shouldered Shaft

012465173
A-16650: RNCC: 3 | RNVC: 2

13 Dec 1986

3040-01-246-7651
Spur Gearshaft

012467651
1395AS211: RNCC: 3 | RNVC: 2
1395AS211: RNCC: 5 | RNVC: 2
1395AS211: RNCC: 5 | RNVC: 2

18 Dec 1986

3040-01-248-3889
Shouldered Shaft

012483889
604927-98-RC: RNCC: 3 | RNVC: 9
604927-98-RC: RNCC: C | RNVC: 1

23 Jan 1987

3040-01-248-3995
Mechanical Drive Housing

012483995
A3290Y233: RNCC: 3 | RNVC: 2
A3290Y233: RNCC: 3 | RNVC: 2
3290Y233: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-247-0566
Shouldered Shaft

012470566
1395AS337: RNCC: 3 | RNVC: 2

23 Dec 1986

3040-01-247-0893
Shouldered Shaft

012470893
29546: RNCC: 3 | RNVC: 2
01-247-0893: RNCC: 5 | RNVC: 2
26538: RNCC: 5 | RNVC: 9
27375: RNCC: 5 | RNVC: 9
62538: RNCC: 5 | RNVC: 9
01-247-0893: RNCC: 5 | RNVC: 9

24 Dec 1986

3040-01-249-1518
Rigid Connecting Link

012491518
12349784: RNCC: 3 | RNVC: 2
12349784: RNCC: 3 | RNVC: 2
12349784: RNCC: 5 | RNVC: 2
12349784: RNCC: 8 | RNVC: 1

6 Feb 1987

3040-01-249-6636
Rigid Connecting Link

012496636
1516-002-CJ01PC8: RNCC: 3 | RNVC: 9
8454687559 ITEM 8: RNCC: 5 | RNVC: 2
1516-002-CJ01PC8: RNCC: 5 | RNVC: 9
211028801: RNCC: C | RNVC: 1

14 Feb 1987

3040-01-251-2327
Manual Control Lever

012512327
5102706: RNCC: 3 | RNVC: 2

15 Mar 1987

3040-01-251-8995
Shouldered Shaft

012518995
F405-10811-2: RNCC: 3 | RNVC: 2

26 Mar 1987

3040-01-197-3722
Linear Actuating Cylinder Assembly Parts Kit

011973722
A47529-1: RNCC: 3 | RNVC: 2
BJI-A47529-1: RNCC: 5 | RNVC: 2
A-47529: RNCC: D | RNVC: 9

20 Dec 1984

3040-01-210-3618
Rigid Connecting Link

012103618
68A500057-2009: RNCC: 3 | RNVC: 2

12 Jun 1985

3040-01-247-0723
Control Cam

012470723
1395AS395: RNCC: 3 | RNVC: 2
1395AS395: RNCC: 5 | RNVC: 2

23 Dec 1986

3040-01-247-0914
Linear Actuating Cylinder Piston

012470914
26382: RNCC: 3 | RNVC: 2
27865: RNCC: 5 | RNVC: 9
3040012470914: RNCC: 6 | RNVC: 9

24 Dec 1986

3040-01-248-8921
Rigid Connecting Link

012488921
12313768: RNCC: 3 | RNVC: 2
12313768: RNCC: 5 | RNVC: 2
12313768: RNCC: 5 | RNVC: 2

31 Jan 1987

3040-01-249-3327
Shaft And Bearing A

012493327
12354717: RNCC: 3 | RNVC: 2
12354717: RNCC: 5 | RNVC: 2
12354717: RNCC: 5 | RNVC: 2

10 Feb 1987

3040-01-187-2265
Linear Actuating Cylinder Head

011872265
29467: RNCC: 3 | RNVC: 2
400-26990 ITEM 5: RNCC: 5 | RNVC: 2
400-26990: RNCC: D | RNVC: 9

21 Aug 1984

3040-01-187-3128
Counterbalance Weight

011873128
301-332-449-0: RNCC: 3 | RNVC: 2
301-332-438-0: RNCC: 3 | RNVC: 9
301-332-438-0: RNCC: 5 | RNVC: 9
301-332-438-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-189-1265
Bell Crank

011891265
6045T30P02: RNCC: 3 | RNVC: 2
6045T30P02: RNCC: 5 | RNVC: 2
6045T30P02: RNCC: 5 | RNVC: 2
10159291: RNCC: 6 | RNVC: 9

11 Sep 1984

3040-01-189-2878
Compressor Link

011892878
5051M67G05: RNCC: 3 | RNVC: 2
5051M67G01: RNCC: 5 | RNVC: 9
5051M67G01: RNCC: 5 | RNVC: 9
5051M67G05: RNCC: 5 | RNVC: 9
5051M67G01: RNCC: 5 | RNVC: 9
5051M67G01: RNCC: 5 | RNVC: 9
5051M67G01: RNCC: 5 | RNVC: 9
5051M67G03: RNCC: 5 | RNVC: 9
5051M67G01: RNCC: 5 | RNVC: 9

14 Sep 1984

3040-01-189-2909
Counterbalance Weight

011892909
9524M50P02: RNCC: 3 | RNVC: 2
9524M50P02: RNCC: 5 | RNVC: 2

14 Sep 1984

3040-01-189-4624
Shouldered Shaft

011894624
217548: RNCC: 3 | RNVC: 2
217548: RNCC: 5 | RNVC: 2
217548: RNCC: 5 | RNVC: 9
217548: RNCC: 5 | RNVC: 9

15 Sep 1984

3040-01-189-7356
Remote Control Lever

011897356
375549: RNCC: 3 | RNVC: 2
375549: RNCC: 5 | RNVC: 2
375549: RNCC: 5 | RNVC: 2
9988-780: RNCC: 5 | RNVC: 2

20 Sep 1984

3040-01-190-2537
Piston Ring

011902537
237243: RNCC: 3 | RNVC: 2
237243: RNCC: 5 | RNVC: 2
237243: RNCC: 5 | RNVC: 9
237243: RNCC: 5 | RNVC: 9
237243: RNCC: 5 | RNVC: 9

25 Sep 1984

3040-01-190-4822
Shaft Collar

011904822
L5873049-003: RNCC: 3 | RNVC: 2
L5873049-003: RNCC: 5 | RNVC: 2

27 Sep 1984

3040-01-191-0124
Rigid Connecting Link

011910124
4061358: RNCC: 3 | RNVC: 2
4061358: RNCC: 5 | RNVC: 2
4061358: RNCC: 5 | RNVC: 9

4 Oct 1984

3040-01-191-8373
Shouldered Shaft

011918373
501-6130290 ITEM 8: RNCC: 3 | RNVC: 2
501-4675661 ITEM 8: RNCC: 3 | RNVC: 2
87643-6503 ITEM 8: RNCC: 3 | RNVC: 2
87643-6503A ITEM A: RNCC: 5 | RNVC: 2
87643-6503: RNCC: D | RNVC: 9
87643-6503A: RNCC: D | RNVC: 9
501-6130290: RNCC: D | RNVC: 9
501-4675661: RNCC: D | RNVC: 9

12 Oct 1984

3040-01-192-1186
Brake Backing Plate

011921186
5120B123-1: RNCC: 3 | RNVC: 2
5120B123-1: RNCC: 5 | RNVC: 9

17 Oct 1984

3040-01-192-8191
Hub Clamp

011928191
221402H1: RNCC: 3 | RNVC: 2
221402H1: RNCC: 3 | RNVC: 9
221402H1: RNCC: 5 | RNVC: 9

26 Oct 1984

3040-01-193-1854
Linear Actuating Cylinder Assembly

011931854
6-372-002316: RNCC: 3 | RNVC: 2
2CF489: RNCC: 5 | RNVC: 9
2CF489: RNCC: C | RNVC: 1

31 Oct 1984

3040-01-193-6745
Body Hub

011936745
2CK11: RNCC: 3 | RNVC: 2
290043: RNCC: 3 | RNVC: 9
9-734-100624: RNCC: 5 | RNVC: 2
WLM290043: RNCC: 5 | RNVC: 2
9-734-100624: RNCC: 5 | RNVC: 2
2CK11: RNCC: 5 | RNVC: 9
9-734-100624: RNCC: 5 | RNVC: 9

6 Nov 1984

3040-01-193-7870
Shaft Retaining Plate

011937870
14032789: RNCC: 3 | RNVC: 2
14032789: RNCC: 5 | RNVC: 9

7 Nov 1984

3040-01-194-2929
Rigid Connecting Link

011942929
206-001-204-1: RNCC: 1 | RNVC: 2
ALK4-111: RNCC: 3 | RNVC: 2
178541: RNCC: 3 | RNVC: 2

12 Nov 1984

3040-01-194-6737
Rigid Connecting Link

011946737
3742-031: RNCC: 3 | RNVC: 9
91624458: RNCC: 5 | RNVC: 2
3742-031: RNCC: C | RNVC: 1

16 Nov 1984

3040-01-194-6742
Remote Control Lever

011946742
4411-045: RNCC: 3 | RNVC: 2
91624308: RNCC: 5 | RNVC: 2
4411-045: RNCC: 5 | RNVC: 9
82566-148: RNCC: 5 | RNVC: 9

16 Nov 1984

3040-01-195-0222
Shifting Lever

011950222
95285-0217: RNCC: 3 | RNVC: 2
95285-0217-3: RNCC: 5 | RNVC: 9

21 Nov 1984

3040-01-196-0942
Linear Actuating Cylinder Assembly

011960942
C-6601: RNCC: 3 | RNVC: 2

7 Dec 1984

3040-01-196-0546
Hold Down Shoe

011960546
035-71700: RNCC: 3 | RNVC: 2

7 Dec 1984

3040-01-197-2063
Accumulator Cap

011972063
27156: RNCC: 3 | RNVC: 2
60-27130 ITEM 8: RNCC: 5 | RNVC: 2
60-27130: RNCC: D | RNVC: 9

19 Dec 1984

3040-01-199-0773
Remote Control Lever

011990773
9529M25P03: RNCC: 3 | RNVC: 2
9529M25P03: RNCC: 5 | RNVC: 9
9529M25P02: RNCC: 5 | RNVC: 9

17 Jan 1985

3040-01-199-3055
Helical Gearshaft

011993055
SS800B-17: RNCC: 3 | RNVC: 2
SS800B-17: RNCC: 3 | RNVC: 9

19 Jan 1985

3040-01-200-0937
Linear Actuating Cylinder Piston Rod

012000937
1159-6-768-001666: RNCC: 3 | RNVC: 2
6-768-001666: RNCC: 3 | RNVC: 2
2CD713: RNCC: 5 | RNVC: 2
B101480: RNCC: 5 | RNVC: 2
2CD713: RNCC: 5 | RNVC: 9

30 Jan 1985

3040-01-200-3201
Spur Gearshaft

012003201
9-632-100911: RNCC: 3 | RNVC: 2
2CK132: RNCC: 5 | RNVC: 2
2CK132: RNCC: 5 | RNVC: 9

1 Feb 1985

3040-01-200-4391
Rigid Connecting Link

012004391
8722186-10: RNCC: 3 | RNVC: 2
8722186: RNCC: D | RNVC: 9

4 Feb 1985

3040-01-202-3233
Counterbalance Weight

012023233
8050049-009: RNCC: 3 | RNVC: 9
X8050049-009: RNCC: 5 | RNVC: 9

28 Feb 1985

3040-01-202-6345
Straight Shaft

012026345
3365515-2: RNCC: 3 | RNVC: 2

5 Mar 1985

3040-01-202-5560
Mechanical Drive Housing

012025560
3855785: RNCC: 3 | RNVC: 2
839505-5: RNCC: 5 | RNVC: 9

4 Mar 1985

3040-01-202-9217
Linear Actuating Cylinder Assembly

012029217
PDG7835: RNCC: 3 | RNVC: 2
PDG7835: RNCC: 3 | RNVC: 9

7 Mar 1985

3040-01-203-4228
Spur Gearshaft

012034228
473404D02: RNCC: 3 | RNVC: 2

14 Mar 1985

3040-01-204-0924
Worm Shaft

012040924
40039: RNCC: 3 | RNVC: 2

22 Mar 1985

3040-01-204-9799
Rigid Connecting Link

012049799
4450-040: RNCC: 3 | RNVC: 2

2 Apr 1985

3040-01-205-2424
Rigid Connecting Link

012052424
A15L1014-3: RNCC: 3 | RNVC: 2

7 Apr 1985

3040-01-205-8565
Rigid Connecting Link

012058565
L3223676-021: RNCC: 3 | RNVC: 2
13223676-021: RNCC: 5 | RNVC: 2
L3223676-011: RNCC: 5 | RNVC: 9

12 Apr 1985

3040-01-208-0393
Flexible Shaft Assembly Core

012080393
4SE01079: RNCC: 3 | RNVC: 2
82344CH: RNCC: 5 | RNVC: 2
82344CH: RNCC: 5 | RNVC: 2
82344: RNCC: 5 | RNVC: 9
4SE01079: RNCC: 5 | RNVC: 9

8 May 1985

3040-01-209-2124
Bell Crank

012092124
68A411033-2013: RNCC: 3 | RNVC: 2

25 May 1985

3040-01-211-1026
Operating Shaft

012111026
9778FN: RNCC: 3 | RNVC: 2

21 Jun 1985

3040-01-211-3203
Control Cam

012113203
105-6834: RNCC: 3 | RNVC: 2
105-6834: RNCC: 5 | RNVC: 9

25 Jun 1985

3040-01-211-8413
Straight Shaft

012118413
9363097: RNCC: 3 | RNVC: 2

2 Jul 1985

3040-01-213-8552
Shaft Collar

012138552
7-07-091: RNCC: 3 | RNVC: 2
2BG397: RNCC: 5 | RNVC: 2
2BG397: RNCC: 5 | RNVC: 9
A-18482: RNCC: D | RNVC: 9

1 Aug 1985

3040-01-214-1291
Linear Actuating Cylinder

012141291
8W0328: RNCC: 3 | RNVC: 2

6 Aug 1985

3040-01-214-3181
Linear Actuating Cylinder Cap

012143181
6-753-000615: RNCC: 3 | RNVC: 2
4HR9: RNCC: 5 | RNVC: 2
4HR9: RNCC: 5 | RNVC: 9
2CT191: RNCC: 5 | RNVC: 9

8 Aug 1985

3040-01-213-8704
Rigid Connecting Link

012138704
7-29-055: RNCC: 3 | RNVC: 2
2BG434: RNCC: 5 | RNVC: 2
2BG434: RNCC: 5 | RNVC: 9
A-18478: RNCC: D | RNVC: 9

1 Aug 1985

3040-01-214-3915
Spur Gearshaft

012143915
23046120: RNCC: 3 | RNVC: 2
23018295: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-214-3155
Straight Shaft

012143155
23018624: RNCC: 3 | RNVC: 2

8 Aug 1985

3040-01-215-7524
Shouldered Shaft

012157524
M8522-0007: RNCC: 3 | RNVC: 2
M8522-7: RNCC: 5 | RNVC: 9

30 Aug 1985

3040-01-216-3254
Rigid Connecting Link

012163254
12329218-9: RNCC: 3 | RNVC: 2
12329218-9: RNCC: 5 | RNVC: 2
12329218-9: RNCC: 5 | RNVC: 2
10085877: RNCC: 6 | RNVC: 9
12329218: RNCC: D | RNVC: 9

7 Sep 1985

3040-01-217-7487
Spur Gearshaft

012177487
8302-15: RNCC: 3 | RNVC: 2

2 Oct 1985

3040-01-218-4399
Shouldered Shaft

012184399
123BM10474-611: RNCC: 3 | RNVC: 2
123BM10474-611: RNCC: 5 | RNVC: 9
123BM10474-611: RNCC: 5 | RNVC: 9

11 Oct 1985

3040-01-219-0723
Brake Disc

012190723
644609104: RNCC: 3 | RNVC: 9
644609104: RNCC: 5 | RNVC: 2

21 Oct 1985

3040-01-219-1533
Counterbalance Weight

012191533
8019129-005: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-5640
Straight Shaft

012195640
62934: RNCC: 3 | RNVC: 2
62934: RNCC: 5 | RNVC: 1

29 Oct 1985

3040-01-219-6721
Shaft Retaining Plate

012196721
12009247: RNCC: 3 | RNVC: 2

31 Oct 1985

3040-01-220-3923
Counterbalance Weight

012203923
8019131-036: RNCC: 3 | RNVC: 9

13 Nov 1985

3040-01-221-1458
Straight Shaft

012211458
1476750: RNCC: 3 | RNVC: 2
1476750: RNCC: 5 | RNVC: 9

24 Nov 1985

3040-01-221-3220
Rotating Shaft Eye Bracket

012213220
1509970W: RNCC: 3 | RNVC: 2
1509970W: RNCC: 5 | RNVC: 9

27 Nov 1985

3040-01-220-9285
Linear Actuating Cylinder Piston

012209285
064-46850-000: RNCC: 3 | RNVC: 2
364-46866 ITEM 31B: RNCC: 5 | RNVC: 2
064-46850: RNCC: 5 | RNVC: 9
064-46850B: RNCC: C | RNVC: 1

21 Nov 1985

3040-01-221-7823
Rigid Connecting Link

012217823
322713: RNCC: 3 | RNVC: 9
197533: RNCC: 5 | RNVC: 9

3 Dec 1985

3040-01-221-7822
Ball Joint

012217822
SPM4S: RNCC: 3 | RNVC: 2
215009: RNCC: 3 | RNVC: 2
215009: RNCC: 5 | RNVC: 9

3 Dec 1985

3040-01-221-7801
Manual Control Lever

012217801
359002: RNCC: 3 | RNVC: 2
4151090: RNCC: 3 | RNVC: 9
359002: RNCC: 5 | RNVC: 2
359002: RNCC: 5 | RNVC: 9

3 Dec 1985

3040-01-222-1845
Counterbalance Weight

012221845
8019131-018: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-222-6344
Counterbalance Weight

012226344
8019131-003: RNCC: 3 | RNVC: 9

14 Dec 1985

3040-01-222-9437
Shouldered Shaft

012229437
2663921: RNCC: 3 | RNVC: 2

20 Dec 1985

3040-01-223-1161
Straight Shaft

012231161
2666237: RNCC: 3 | RNVC: 2

21 Dec 1985

3040-01-223-8789
Rigid Connecting Link

012238789
12313432: RNCC: 3 | RNVC: 2
12313432: RNCC: 3 | RNVC: 2
12313432: RNCC: 5 | RNVC: 2

9 Jan 1986

3040-01-223-8795
Rigid Connecting Link

012238795
8386738: RNCC: 3 | RNVC: 9

9 Jan 1986

3040-01-221-7824
Rigid Connecting Link

012217824
82A5052A0013: RNCC: 3 | RNVC: 2

3 Dec 1985

3040-01-224-8497
Push-Pull Control Assembly

012248497
032377-003-14FT: RNCC: 3 | RNVC: 2
032377-003-14FT: RNCC: 3 | RNVC: 9

23 Jan 1986

3040-01-225-6170
Spur Gearshaft

012256170
303529: RNCC: 3 | RNVC: 2
303529: RNCC: 5 | RNVC: 9
8D-6605 PC 5: RNCC: 5 | RNVC: 9
8D-4828-901: RNCC: 5 | RNVC: 9
8D-6605: RNCC: D | RNVC: 9

5 Feb 1986

3040-01-225-8689
Shouldered Shaft

012258689
17185-1: RNCC: 3 | RNVC: 2
17185: RNCC: D | RNVC: 9

8 Feb 1986

3040-01-228-5460
Shouldered Shaft

012285460
5191165-2: RNCC: 3 | RNVC: 2
5191165-2: RNCC: C | RNVC: 1

18 Mar 1986

3040-01-229-1342
Mechanical Drive Housing

012291342
1046110: RNCC: 1 | RNVC: 2
0231-05920: RNCC: 3 | RNVC: 2
0221-19689: RNCC: 3 | RNVC: 9
83-14519: RNCC: 5 | RNVC: 2
83-14519: RNCC: 5 | RNVC: 9
83-14519: RNCC: 5 | RNVC: 9
0221-19689: RNCC: 5 | RNVC: 9
02-21-05679-089: RNCC: 5 | RNVC: 9
83-14519: RNCC: 5 | RNVC: 9

26 Mar 1986

3040-01-230-6721
Manual Control Lever

012306721
382-812-080-401-026: RNCC: 3 | RNVC: 2

16 Apr 1986

3040-01-231-2976
Linear Actuating Cylinder Assembly

012312976
2.50CBB-2HLTVS14CX6.000: RNCC: 3 | RNVC: 2
AG146145D0: RNCC: 5 | RNVC: 2

25 Apr 1986

3040-01-234-3556
Linear Actuating Cylinder Assembly

012343556
1H2H0A00276289: RNCC: 3 | RNVC: 2
GG094613-B0: RNCC: 5 | RNVC: 9
2CFH-2HLTS13CX82: RNCC: 5 | RNVC: 9

13 Jun 1986

3040-01-236-0232
Mechanical Drive Housing

012360232
10941655: RNCC: 3 | RNVC: 2

10 Jul 1986

3040-01-236-4736
Manual Control Lever

012364736
75A800095-1007: RNCC: 3 | RNVC: 2
75A800095-1005: RNCC: E | RNVC: 8

17 Jul 1986

3040-01-236-6310
Shaft Assembly

012366310
A02C2608-5: RNCC: 3 | RNVC: 2
A02C2608-1: RNCC: 5 | RNVC: 9

20 Jul 1986

3040-01-237-0212
Shaft Collar

012370212
406 254 09 10: RNCC: 3 | RNVC: 2
406 254 09 10: RNCC: 5 | RNVC: 9
406 254 09 10: RNCC: C | RNVC: 1

24 Jul 1986

3040-01-238-0285
Remote Control Lever

012380285
419 301 00 41: RNCC: 3 | RNVC: 2
419 301 00 41: RNCC: 5 | RNVC: 2
419 301 00 41: RNCC: 5 | RNVC: 9

8 Aug 1986

3040-01-237-1915
Remote Control Lever

012371915
312 300 21 25: RNCC: 3 | RNVC: 2
312 300 21 25: RNCC: 5 | RNVC: 9
312 300 21 25: RNCC: C | RNVC: 1

26 Jul 1986

3040-01-238-8740
Straight Shaft

012388740
9RG003310-7: RNCC: 3 | RNVC: 2

21 Aug 1986

3040-01-240-1960
Straight Shaft

012401960
60-400-0023-2: RNCC: 3 | RNVC: 2

10 Sep 1986

3040-01-240-3080
Shouldered Shaft

012403080
DS-842667: RNCC: 3 | RNVC: 2
842885: RNCC: 5 | RNVC: 9

12 Sep 1986

3040-01-241-3157
Linear Actuating Cylinder Assembly

012413157
G109186: RNCC: 3 | RNVC: 2
G109186: RNCC: 5 | RNVC: 2

24 Sep 1986

3040-01-241-7404
Shaft Retaining Plate

012417404
12447266: RNCC: 3 | RNVC: 2
M10WH100: RNCC: 5 | RNVC: 9
M10WH100-2: RNCC: 5 | RNVC: 9

1 Oct 1986

3040-01-241-6874
Shaft Retaining Plate

012416874
2BA365: RNCC: 3 | RNVC: 2
2BA365: RNCC: 5 | RNVC: 9
417605: RNCC: 5 | RNVC: 9

30 Sep 1986

3040-01-242-4233
Control Cam

012424233
1985982: RNCC: 3 | RNVC: 2
A49585: RNCC: 5 | RNVC: 2
1985982: RNCC: 5 | RNVC: 9

11 Oct 1986

3040-01-243-8786
Push-Pull Control Assembly

012438786
634AS100-D144: RNCC: 1 | RNVC: 2
15505100: RNCC: 3 | RNVC: 2
634AS100-D144-1: RNCC: 5 | RNVC: 2
15505100: RNCC: 5 | RNVC: 9

1 Nov 1986

3040-01-244-3004
Straight Shaft

012443004
738281: RNCC: 3 | RNVC: 2

9 Nov 1986

3040-01-245-2421
Manual Control Lever

012452421
007243-501: RNCC: 3 | RNVC: 2
007243-501: RNCC: 3 | RNVC: 9

26 Nov 1986

3040-01-247-5487
Friction Lining

012475487
322074-31: RNCC: 3 | RNVC: 2
322074: RNCC: D | RNVC: 9

8 Jan 1987

3040-01-247-5562
Control Cam

012475562
845-4457605 PIECE 13: RNCC: 3 | RNVC: 2
845-4457606: RNCC: D | RNVC: 9
845-4457605: RNCC: D | RNVC: 9
845-4457605: RNCC: D | RNVC: 9

8 Jan 1987

3040-01-247-5269
Control Cam

012475269
732603: RNCC: 3 | RNVC: 2
1976323 ITEM 8: RNCC: 5 | RNVC: 9
1882124 PIECE 1: RNCC: C | RNVC: 1
1976323: RNCC: D | RNVC: 9

8 Jan 1987

3040-01-248-3883
Shouldered Shaft

012483883
609177-31-RB: RNCC: 3 | RNVC: 2
609177-31-RB: RNCC: 3 | RNVC: 9

23 Jan 1987

3040-01-248-3891
Shouldered Shaft

012483891
604918-1-RA: RNCC: 3 | RNVC: 9
604918-1-RA: RNCC: C | RNVC: 1

23 Jan 1987

3040-01-248-5813
Worm Shaft

012485813
60-300-0045-2: RNCC: 3 | RNVC: 2

26 Jan 1987

3040-01-248-5609
Rigid Connecting Link

012485609
L5247112-001: RNCC: 3 | RNVC: 2

25 Jan 1987

3040-01-249-3384
Shouldered Shaft

012493384
12349734: RNCC: 3 | RNVC: 2
12349734: RNCC: 5 | RNVC: 9

10 Feb 1987

3040-01-250-3991
Shouldered Shaft

012503991
610531-56-R: RNCC: 3 | RNVC: 9
610531-56-R: RNCC: C | RNVC: 1

1 Mar 1987

3040-01-250-7521
Shaft Assembly

012507521
531430-80: RNCC: 3 | RNVC: 2

7 Mar 1987

3040-01-250-8206
Rigid Connecting Link

012508206
6512-513: RNCC: 3 | RNVC: 2
10106986: RNCC: 6 | RNVC: 9
SR11392A113: RNCC: C | RNVC: 1

7 Mar 1987

3040-01-251-9008
Straight Shaft

012519008
F405-10811-4: RNCC: 3 | RNVC: 2

26 Mar 1987

3040-01-251-8470
Bevel Gearshaft

012518470
4068119: RNCC: 3 | RNVC: 2
4068119: RNCC: 5 | RNVC: 2
3040PL0667925: RNCC: 6 | RNVC: 9

25 Mar 1987

3040-01-251-9668
Straight Shaft

012519668
F405-10811-501: RNCC: 3 | RNVC: 2

27 Mar 1987

3040-01-251-9383
Shaft Collar

012519383
5594001: RNCC: 3 | RNVC: 2
12338539: RNCC: 3 | RNVC: 2

26 Mar 1987

3040-01-186-9528
Spur Gearshaft

011869528
11863: RNCC: 3 | RNVC: 2
11863: RNCC: 5 | RNVC: 9

16 Aug 1984

3040-01-189-2971
Bell Crank

011892971
9511M24P09: RNCC: 3 | RNVC: 2
9511M24P09: RNCC: 3 | RNVC: 2

27 Mar 2014

3040-01-189-6396
Pump Driver Coupling

011896396
4213-805000: RNCC: 3 | RNVC: 2
950512C1: RNCC: 5 | RNVC: 9

18 Sep 1984

3040-01-189-8830
Spur Gearshaft

011898830
245445: RNCC: 3 | RNVC: 2

20 Sep 1984

3040-01-190-3425
Manual Control Lever

011903425
143759: RNCC: 3 | RNVC: 2
4685-00: RNCC: 5 | RNVC: 2
4685-00: RNCC: 5 | RNVC: 9

26 Sep 1984

3040-01-190-0443
Shaft Collar

011900443
75A326553-2001: RNCC: 3 | RNVC: 9
75A326553-2001: RNCC: 5 | RNVC: 2
75A326553-2001: RNCC: C | RNVC: 1
75A326553: RNCC: D | RNVC: 9

23 Sep 1984

3040-01-190-4304
Rigid Connecting Link

011904304
7566-5306: RNCC: 3 | RNVC: 2
SR11578A-5306: RNCC: 3 | RNVC: 2
LE162-0056-5306: RNCC: 5 | RNVC: 2
7566-7: RNCC: 5 | RNVC: 9
LE162-0056: RNCC: 7 | RNVC: 1

27 Sep 1984

3040-01-190-9727
Piston Ring

011909727
237242: RNCC: 3 | RNVC: 2
237242: RNCC: 5 | RNVC: 9
237242: RNCC: 5 | RNVC: 9
237242: RNCC: C | RNVC: 1

4 Oct 1984

3040-01-191-6735
Rigid Connecting Link

011916735
75A650004-1003: RNCC: 3 | RNVC: 2
75A650004: RNCC: D | RNVC: 9

11 Oct 1984

3040-01-192-1265
Rod End Ball Joint

011921265
322114 ITEM 28: RNCC: 3 | RNVC: 2
SPF-65: RNCC: C | RNVC: 1

17 Oct 1984

3040-01-193-4054
Shouldered Shaft

011934054
6-768-001685: RNCC: 3 | RNVC: 2
2CD716: RNCC: 5 | RNVC: 2
2CD716: RNCC: 5 | RNVC: 9

3 Nov 1984

3040-01-193-4061
Linear Actuating Cylinder Piston

011934061
WLM290092: RNCC: 3 | RNVC: 2
290092: RNCC: 5 | RNVC: 2
290092: RNCC: 5 | RNVC: 2
2CK134: RNCC: 5 | RNVC: 2
9-734-100644: RNCC: 5 | RNVC: 9
2CK134: RNCC: 5 | RNVC: 9
9-734-100644: RNCC: 5 | RNVC: 9
290092: RNCC: 5 | RNVC: 9

3 Nov 1984

3040-01-195-7071
Bell Crank

011957071
319904: RNCC: 3 | RNVC: 2
319904: RNCC: 5 | RNVC: 9
319904: RNCC: 5 | RNVC: 9
319904: RNCC: 5 | RNVC: 9

1 Dec 1984

3040-01-197-2107
Spur Gearshaft

011972107
26954: RNCC: 3 | RNVC: 2

19 Dec 1984

3040-01-197-0595
Rigid Connecting Link

011970595
123C10219-603: RNCC: 3 | RNVC: 2
123C10219-603: RNCC: 5 | RNVC: 9

18 Dec 1984

3040-01-198-2863
Shaft Collar

011982863
007677-01: RNCC: 3 | RNVC: 2
007677-01: RNCC: 5 | RNVC: 9
M300058-1: RNCC: 5 | RNVC: 9
38-2206-01: RNCC: 5 | RNVC: 9
M300058: RNCC: D | RNVC: 9

6 Jan 1985

3040-01-199-6750
Pawl

011996750
A1047: RNCC: 3 | RNVC: 2
D1004: RNCC: D | RNVC: 9

24 Jan 1985

3040-01-200-0931
Linear Actuating Cylinder Cap

012000931
6-372-002420: RNCC: 3 | RNVC: 2
2CD625: RNCC: 5 | RNVC: 2
2CD625: RNCC: 5 | RNVC: 9

30 Jan 1985

3040-01-200-3141
Straight Shaft

012003141
WLM290058: RNCC: 3 | RNVC: 2
290058: RNCC: 5 | RNVC: 2
2CK143: RNCC: 5 | RNVC: 2
290058: RNCC: 5 | RNVC: 2
290058: RNCC: 5 | RNVC: 9
9-734-100653: RNCC: 5 | RNVC: 9
2CK143: RNCC: 5 | RNVC: 9

1 Feb 1985

3040-01-200-2422
Manual Control Lever

012002422
25028-02: RNCC: 3 | RNVC: 2
9926104081: RNCC: 3 | RNVC: 2
9-926-104081: RNCC: 5 | RNVC: 2
9-926-104081: RNCC: 5 | RNVC: 2
2CC783: RNCC: 5 | RNVC: 2
2CC783: RNCC: 5 | RNVC: 9

31 Jan 1985

3040-01-200-8946
Counterbalance Weight

012008946
8049969-001: RNCC: 3 | RNVC: 2
8049969-001: RNCC: 5 | RNVC: 9
8049969-001: RNCC: 5 | RNVC: 9
X8049969-001: RNCC: 5 | RNVC: 9

10 Feb 1985

3040-01-201-1084
Shouldered Shaft

012011084
2301117-1: RNCC: 3 | RNVC: 9
2301117-1: RNCC: 5 | RNVC: 9

12 Feb 1985

3040-01-200-9440
Spur Gearshaft

012009440
D2-1639: RNCC: 3 | RNVC: 2

10 Feb 1985

3040-01-201-2378
Coupling Actuator

012012378
601065: RNCC: 3 | RNVC: 2

14 Feb 1985

3040-01-201-4818
Rigid Connecting Link

012014818
12336825: RNCC: 3 | RNVC: 2

19 Feb 1985

3040-01-201-3940
Windshield Wiper Shaft

012013940
B 391 441 068: RNCC: 3 | RNVC: 2
6T6714: RNCC: 5 | RNVC: 2

16 Feb 1985

3040-01-201-6889
Shaft Retaining Plate

012016889
829523-0: RNCC: 3 | RNVC: 2
829523: RNCC: 5 | RNVC: 2
829523-0: RNCC: 5 | RNVC: 2
829523-0: RNCC: 5 | RNVC: 9

20 Feb 1985

3040-01-201-9593
Shouldered Shaft

012019593
A02R2851-7: RNCC: 3 | RNVC: 2

26 Feb 1985

3040-01-202-6494
Counterbalance Weight

012026494
8050049-006: RNCC: 3 | RNVC: 9
X8050049-006: RNCC: 5 | RNVC: 9

5 Mar 1985

3040-01-202-9738
Linear Actuating Cylinder Piston

012029738
752063-2: RNCC: 3 | RNVC: 2
752063: RNCC: D | RNVC: 9

8 Mar 1985

3040-01-203-5235
Hub Clamp

012035235
J26997-2: RNCC: 3 | RNVC: 2
2BA236: RNCC: 5 | RNVC: 2
2BA236: RNCC: 5 | RNVC: 9

15 Mar 1985

3040-01-203-7186
Control Cam

012037186
3037-824: RNCC: 3 | RNVC: 2

17 Mar 1985

3040-01-206-1348
Rod Assembly

012061348
2-13617-3: RNCC: 3 | RNVC: 9
2-13617-3: RNCC: 5 | RNVC: 2
2-13617-3: RNCC: 5 | RNVC: 2
2-13617-3: RNCC: 5 | RNVC: 9

15 Apr 1985

3040-01-206-6418
Bell Crank

012066418
L3400138-001: RNCC: 3 | RNVC: 2
L3400138-001: RNCC: 5 | RNVC: 2

20 Apr 1985

3040-01-207-9631
Shouldered Shaft

012079631
458-52254-1: RNCC: 3 | RNVC: 2
458-52254: RNCC: D | RNVC: 9

8 May 1985

3040-01-208-2831
Shouldered Shaft

012082831
5008071: RNCC: 3 | RNVC: 2

11 May 1985

3040-01-208-9290
Shouldered Shaft

012089290
7N5874: RNCC: 3 | RNVC: 2

21 May 1985

3040-01-209-3409
Manual Control Lever

012093409
21880: RNCC: 3 | RNVC: 2
15616: RNCC: 5 | RNVC: 9
18137: RNCC: 5 | RNVC: 9
21880: RNCC: 5 | RNVC: 9

29 May 1985

3040-01-211-2255
Manual Control Lever

012112255
1V1703: RNCC: 3 | RNVC: 2
1V1703: RNCC: 5 | RNVC: 2
2GK352: RNCC: 5 | RNVC: 2
2GK352: RNCC: 5 | RNVC: 9

22 Jun 1985

3040-01-211-1039
Helical Gearshaft

012111039
915148: RNCC: 3 | RNVC: 2

21 Jun 1985

3040-01-211-5614
Shouldered Shaft

012115614
387-3550: RNCC: 3 | RNVC: 2
387-3550: RNCC: 3 | RNVC: 9
387-3550: RNCC: 5 | RNVC: 9
387-3550: RNCC: 5 | RNVC: 9

28 Jun 1985

3040-01-212-2525
Transmission Sleeve

012122525
L6411230-041: RNCC: 3 | RNVC: 2

10 Jul 1985

3040-01-211-9974
Straight Shaft

012119974
384-1056-00: RNCC: 3 | RNVC: 2

5 Jul 1985

3040-01-213-2401
Discriminator

012132401
9370140-2: RNCC: 3 | RNVC: 2

24 Jul 1985

3040-01-213-5570
Shouldered Shaft

012135570
3171936-1: RNCC: 3 | RNVC: 2

27 Jul 1985

3040-01-213-4628
Rigid Connecting Link

012134628
4062343: RNCC: 3 | RNVC: 2
4062343: RNCC: 5 | RNVC: 2
4062343: RNCC: 5 | RNVC: 9

26 Jul 1985

3040-01-213-2939
Shouldered Shaft

012132939
751860-1-1: RNCC: 3 | RNVC: 2

25 Jul 1985

3040-01-214-1604
Control Cam

012141604
23018023: RNCC: 3 | RNVC: 2
23018023: RNCC: 8 | RNVC: 2

6 Aug 1985

3040-01-214-3864
Brake Apply-Stationary Cam

012143864
23018110: RNCC: 3 | RNVC: 2
23018110: RNCC: 8 | RNVC: 2

9 Aug 1985

3040-01-214-3861
Mechanical Drive Housing

012143861
23018100: RNCC: 3 | RNVC: 2
23018100: RNCC: 8 | RNVC: 2

9 Aug 1985

3040-01-216-2402
Linear Actuating Cylinder Piston

012162402
2518493: RNCC: 3 | RNVC: 2
2518493: RNCC: 5 | RNVC: 9

7 Sep 1985

3040-01-216-3952
Shouldered Shaft

012163952
23018157: RNCC: 3 | RNVC: 2
23018157: RNCC: 8 | RNVC: 2

10 Sep 1985

3040-01-218-2915
Rigid Connecting Link

012182915
4900-145: RNCC: 3 | RNVC: 2
B889100-145: RNCC: 3 | RNVC: 2
75J618002-145: RNCC: 5 | RNVC: 9
4900-145-M: RNCC: 5 | RNVC: 9
75B618002-145: RNCC: 7 | RNVC: 2

10 Oct 1985

3040-01-219-1530
Counterbalance Weight

012191530
8019129-001: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1538
Counterbalance Weight

012191538
8019129-010: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-220-0090
Linear Actuating Cylinder

012200090
R0BRIC-3: RNCC: 3 | RNVC: 2
R0BR1C-3: RNCC: C | RNVC: 1

6 Nov 1985

3040-01-220-6083
Detent Plate

012206083
3-4284-800: RNCC: 3 | RNVC: 2
269-8075-010: RNCC: 3 | RNVC: 2

16 Nov 1985

3040-01-221-5684
Manual Control Lever

012215684
39454: RNCC: 3 | RNVC: 2

29 Nov 1985

3040-01-221-9320
Counterbalance Weight

012219320
8019131-031: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-221-9321
Counterbalance Weight

012219321
8019131-032: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-223-0916
Shouldered Shaft

012230916
723643: RNCC: 3 | RNVC: 2
723643: RNCC: 5 | RNVC: 9
723643: RNCC: 5 | RNVC: 9

21 Dec 1985

3040-01-223-2607
Rigid Connecting Link

012232607
12313527: RNCC: 3 | RNVC: 2
12313527: RNCC: 5 | RNVC: 2
12313527: RNCC: 5 | RNVC: 2
12313527: RNCC: 5 | RNVC: 9

24 Dec 1985

3040-01-224-2194
Counterbalance Weight

012242194
2664015: RNCC: 3 | RNVC: 2

14 Jan 1986

3040-01-225-5957
Rigid Connecting Link

012255957
12329258: RNCC: 3 | RNVC: 2
10085879: RNCC: 6 | RNVC: 9

4 Feb 1986

3040-01-226-8041
Rigid Connecting Link

012268041
1415130: RNCC: 3 | RNVC: 2
1415130: RNCC: 5 | RNVC: 9

22 Feb 1986

3040-01-227-7369
Rotating Shaft Eye Bracket

012277369
16-01-067-012: RNCC: 3 | RNVC: 2
2CX239: RNCC: 5 | RNVC: 2
2CX239: RNCC: 5 | RNVC: 9

7 Mar 1986

3040-01-228-1080
Straight Shaft

012281080
522808: RNCC: 3 | RNVC: 2

14 Mar 1986

3040-01-228-4209
Linear Actuating Cylinder Assembly

012284209
AG146147D0: RNCC: 3 | RNVC: 2
1H000076648: RNCC: 5 | RNVC: 2
2 1/2CFH-2HLTVS13CX87.000: RNCC: 5 | RNVC: 9

18 Mar 1986

3040-01-230-5575
Linear Actuating Cylinder Assembly Parts Kit

012305575
8407-044: RNCC: 3 | RNVC: 2
430855B: RNCC: 3 | RNVC: 2
2CT276: RNCC: 5 | RNVC: 2
430855B: RNCC: 5 | RNVC: 2
430855B: RNCC: 5 | RNVC: 9
430855B: RNCC: 5 | RNVC: 9
2CT276: RNCC: 5 | RNVC: 9
8310-009: RNCC: D | RNVC: 9

16 Apr 1986

3040-01-230-5850
Spur Gearshaft

012305850
12524148: RNCC: 3 | RNVC: 2

16 Apr 1986

3040-01-230-9081
Rigid Connecting Link

012309081
20225: RNCC: 3 | RNVC: 2
20225: RNCC: 5 | RNVC: 9

19 Apr 1986

3040-01-232-5300
Straight Shaft

012325300
60244-40988: RNCC: 3 | RNVC: 2
60244-40988: RNCC: 3 | RNVC: 9

16 May 1986

3040-01-235-3137
Spur Gearshaft

012353137
8365300: RNCC: 3 | RNVC: 2
8365300: RNCC: 3 | RNVC: 9

27 Jun 1986

3040-01-236-3492
Rod Assembly

012363492
4F43741-103B: RNCC: 3 | RNVC: 2
4F43741-103B: RNCC: 5 | RNVC: 2

16 Jul 1986

3040-01-237-6265
Shouldered Shaft

012376265
406 264 29 18: RNCC: 3 | RNVC: 2
406 264 29 18: RNCC: 5 | RNVC: 2
406 264 29 18: RNCC: 5 | RNVC: 9

3 Aug 1986

3040-01-239-1846
Rotating Shaft Eye Bracket

012391846
12350191: RNCC: 3 | RNVC: 2

26 Aug 1986

3040-01-240-2833
Linear Actuating Cylinder Assembly

012402833
G109140: RNCC: 3 | RNVC: 2
G109140: RNCC: 5 | RNVC: 2

11 Sep 1986

3040-01-240-3568
Spur Gearshaft

012403568
801338: RNCC: 3 | RNVC: 2
801338: RNCC: 5 | RNVC: 2
801338: RNCC: 5 | RNVC: 2
742355: RNCC: E | RNVC: 8

12 Sep 1986

3040-01-240-3519
Counterbalance Weight

012403519
301-332-515-0: RNCC: 3 | RNVC: 2
301-332-515-0: RNCC: 5 | RNVC: 2

12 Sep 1986

3040-01-241-2032
Hydraulic Swivel Valve

012412032
BM-S-542: RNCC: 3 | RNVC: 9
S-542VM: RNCC: 5 | RNVC: 2
S-542: RNCC: 5 | RNVC: 9

23 Sep 1986

3040-01-243-3875
Remote Control Lever

012433875
12349732-2: RNCC: 3 | RNVC: 2

24 Oct 1986

3040-01-244-3100
Mechanical Drive Housing

012443100
SK-3806-16A: RNCC: 3 | RNVC: 2
SK-3806-16: RNCC: 5 | RNVC: 9

9 Nov 1986

3040-01-244-4776
Manual Control Lever

012444776
16103450: RNCC: 3 | RNVC: 2
16103450: RNCC: 3 | RNVC: 9

14 Nov 1986

3040-01-246-1634
Spur Gearshaft

012461634
742832: RNCC: 3 | RNVC: 2

10 Dec 1986

3040-01-246-0998
Rotating Shaft Eye Bracket

012460998
12357364: RNCC: 3 | RNVC: 2

9 Dec 1986

3040-01-246-7650
Shouldered Shaft

012467650
1395AS212-2: RNCC: 3 | RNVC: 2
1395AS212: RNCC: 5 | RNVC: 9
1395AS212-2: RNCC: D | RNVC: 9

18 Dec 1986

3040-01-247-5671
Rigid Connecting Link

012475671
209-001-358-101: RNCC: 3 | RNVC: 2
209-001-358: RNCC: D | RNVC: 9

8 Jan 1987

3040-01-247-7793
Straight Shaft

012477793
N8634: RNCC: 3 | RNVC: 2

12 Jan 1987

3040-01-248-3885
Shouldered Shaft

012483885
609148-1-RB: RNCC: 3 | RNVC: 2
609148-1-RB: RNCC: 5 | RNVC: 9
609148-1-R8: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-246-7846
Shouldered Shaft

012467846
1395AS231: RNCC: 3 | RNVC: 2

18 Dec 1986

3040-01-250-4225
Shouldered Shaft

012504225
610531-59-R: RNCC: 3 | RNVC: 9
610531-59-R: RNCC: C | RNVC: 1

1 Mar 1987

3040-01-250-5003
Shaft Coupling

012505003
10069-1108: RNCC: 3 | RNVC: 2

3 Mar 1987

3040-01-251-8878
Counterbalance Weight

012518878
A334A200-105: RNCC: 3 | RNVC: 2

25 Mar 1987

3040-01-251-0557
Shouldered Shaft

012510557
9377156: RNCC: 3 | RNVC: 2

11 Mar 1987

3040-01-251-9449
Shaft Retaining Plate

012519449
12268269: RNCC: 3 | RNVC: 2

26 Mar 1987

3040-01-130-0721
Straight Shaft

011300721
603226-2-A: RNCC: 3 | RNVC: 2
603226-2-A: RNCC: 3 | RNVC: 9

15 Apr 1982

3040-01-130-5633
Pawl

011305633
7839444-01: RNCC: 3 | RNVC: 9
7839444: RNCC: D | RNVC: 9

28 Apr 1982

3040-01-131-0428
Straight Shaft

011310428
65396-04001-102: RNCC: 3 | RNVC: 2
65396-04001-102: RNCC: 5 | RNVC: 2

3 May 1982

3040-01-131-0071
Rigid Connecting Link

011310071
2040893-1: RNCC: 3 | RNVC: 2
2040893-1: RNCC: 5 | RNVC: 2
10106884: RNCC: 6 | RNVC: 9
2040893: RNCC: D | RNVC: 9

1 May 1982

3040-01-132-4761
Straight Shaft

011324761
8N3251: RNCC: 3 | RNVC: 2

30 May 1982

3040-01-131-6008
Straight Shaft

011316008
A150545: RNCC: 3 | RNVC: 2
A57532: RNCC: C | RNVC: 1
60-21497: RNCC: C | RNVC: 1

13 May 1982

3040-01-133-4198
Push-Pull Control Assembly

011334198
1949-K500-2010: RNCC: 3 | RNVC: 2
K-500-2010: RNCC: 3 | RNVC: 2
D044195-3-142: RNCC: 5 | RNVC: 9

13 Jun 1982

3040-01-133-4622
Spur Gearshaft

011334622
132D1702: RNCC: 3 | RNVC: 2
10106889: RNCC: 6 | RNVC: 9

15 Jun 1982

3040-01-134-6544
Linear Actuating Cylinder Cap

011346544
12270450: RNCC: 3 | RNVC: 2

7 Jul 1982

3040-01-134-7123
Control Cam

011347123
12312307: RNCC: 3 | RNVC: 2
12312307: RNCC: D | RNVC: 9

8 Jul 1982

3040-01-135-1476
Bell Crank Support

011351476
65413-07202-041: RNCC: 3 | RNVC: 2

18 Jul 1982

3040-01-134-9429
Body Hub

011349429
104ADET9: RNCC: 3 | RNVC: 9

14 Jul 1982

3040-01-135-1593
Bell Crank

011351593
65413-07201-041: RNCC: 3 | RNVC: 2

18 Jul 1982

3040-01-136-1462
Bevel Gearshaft

011361462
65395-07022-101: RNCC: 3 | RNVC: 2

4 Aug 1982

3040-01-136-3108
Hydraulic Accumulator

011363108
ACB-307239B: RNCC: 3 | RNVC: 2
ACB307239A: RNCC: 5 | RNVC: 9
ACB307239A: RNCC: 5 | RNVC: 9
ACB307239A: RNCC: 5 | RNVC: 9
ACC307226A: RNCC: 5 | RNVC: 9

6 Aug 1982

3040-01-136-1463
Spur Gearshaft

011361463
64351-11088-102: RNCC: 3 | RNVC: 2

4 Aug 1982

3040-01-136-4414
Bell Crank

011364414
65410-03210-046: RNCC: 3 | RNVC: 2

8 Aug 1982

3040-01-136-8767
Straight Shaft

011368767
102-218-080-420-002: RNCC: 3 | RNVC: 2
14-22-2-1 PC 5: RNCC: 5 | RNVC: 2
819-080-420-040: RNCC: C | RNVC: 1
14-22-2-1: RNCC: D | RNVC: 9

17 Aug 1982

3040-01-138-6563
Manual Control Lever

011386563
2617116: RNCC: 3 | RNVC: 2

17 Sep 1982

3040-01-139-2396
Spur Gearshaft

011392396
131D5019P02: RNCC: 3 | RNVC: 9
131D5019P02: RNCC: 5 | RNVC: 2
131D5019P02: RNCC: 5 | RNVC: 2

27 Sep 1982

3040-01-139-3092
Ecentric Cam

011393092
13155027-2: RNCC: 3 | RNVC: 2
13155027-2: RNCC: 5 | RNVC: 1
13155027-2: RNCC: 5 | RNVC: 1

29 Sep 1982

3040-01-139-5832
Rigid Connecting Link

011395832
65410-00014-046: RNCC: 3 | RNVC: 2

4 Oct 1982

3040-01-139-7283
Hook Assembly Fixture Shoe

011397283
74D130016-2023: RNCC: 3 | RNVC: 2
74D130016-2023: RNCC: 5 | RNVC: 9

5 Oct 1982

3040-01-140-3192
Straight Shaft

011403192
172B4311P1: RNCC: 3 | RNVC: 2
10106911: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-140-3504
Control Cam

011403504
2664171: RNCC: 3 | RNVC: 2
10158994: RNCC: 6 | RNVC: 9

11 Oct 1982

3040-01-142-4295
Pivot Shaft

011424295
2771568-101: RNCC: 3 | RNVC: 2
2771568-101: RNCC: 3 | RNVC: 9
2771568-101: RNCC: 5 | RNVC: 9

16 Nov 1982

3040-01-144-4386
Bell Crank

011444386
74A635603-1005: RNCC: 3 | RNVC: 2
74A635603-1005: RNCC: 5 | RNVC: 2
74A635603-1003: RNCC: 5 | RNVC: 9
74A635603-1001: RNCC: 5 | RNVC: 9
10106932: RNCC: 6 | RNVC: 9
74A635603-1001: RNCC: C | RNVC: 1
74A635603: RNCC: D | RNVC: 9

20 Dec 1982

3040-01-144-4387
Bell Crank

011444387
65861-04176-041: RNCC: 3 | RNVC: 2
65861-04176-041: RNCC: 5 | RNVC: 9

20 Dec 1982

3040-01-145-3415
Shouldered Shaft

011453415
8261851: RNCC: 3 | RNVC: 2

10 Jan 1983

3040-01-147-1068
Body Hub

011471068
196B7669: RNCC: 3 | RNVC: 9
196B7669: RNCC: 5 | RNVC: 2
10106935: RNCC: 6 | RNVC: 9

10 Feb 1983

3040-01-147-1185
Manual Control Lever

011471185
3000740: RNCC: 3 | RNVC: 2

11 Feb 1983

3040-01-148-1641
Shaft Collar

011481641
12316989: RNCC: 3 | RNVC: 2
12307472: RNCC: E | RNVC: 8

1 Mar 1983

3040-01-148-7579
Flexible Shaft Assembly

011487579
FAUSG12PZ1: RNCC: 3 | RNVC: 2
S19430-601: RNCC: 3 | RNVC: 2
19430-601: RNCC: 5 | RNVC: 2
331-19430: RNCC: 5 | RNVC: 9
15908Y1: RNCC: 5 | RNVC: 9
15908Y1: RNCC: 5 | RNVC: 9
10130518: RNCC: 6 | RNVC: 9
132D1805: RNCC: 7 | RNVC: 2

11 Mar 1983

3040-01-149-6739
Straight Shaft

011496739
11V-102-S20: RNCC: 3 | RNVC: 2
465-080-470: RNCC: 3 | RNVC: 2
200113Z PIECE 325-15: RNCC: 5 | RNVC: 2
292050J22: RNCC: 5 | RNVC: 9
200113Z: RNCC: D | RNVC: 9

24 Mar 1983

3040-01-149-7445
Shouldered Shaft

011497445
2022976-3-2: RNCC: 3 | RNVC: 2
2022976-3-1: RNCC: 5 | RNVC: 9
3040PL0667063: RNCC: 6 | RNVC: 9
3040PL1601282: RNCC: 6 | RNVC: 9
16VM003003-11: RNCC: 7 | RNVC: 2

25 Mar 1983

3040-01-150-5401
Spur Gearshaft

011505401
2AL547: RNCC: 3 | RNVC: 2
113321: RNCC: 5 | RNVC: 2
2AL547: RNCC: 5 | RNVC: 9

6 Apr 1983

3040-01-151-0825
Spur Gearshaft

011510825
727113: RNCC: 3 | RNVC: 2
727113: RNCC: 5 | RNVC: 2

12 Apr 1983

3040-01-151-0881
Bell Crank

011510881
6045T30P01: RNCC: 3 | RNVC: 2
10158659: RNCC: 6 | RNVC: 9

12 Apr 1983

3040-01-151-9348
Tachometer Drive Shaft

011519348
21690800: RNCC: 3 | RNVC: 2
216908: RNCC: 5 | RNVC: 9
21690800: RNCC: 5 | RNVC: 9
5730874: RNCC: 5 | RNVC: 9

25 Apr 1983

3040-01-153-1668
Rigid Connecting Link

011531668
65661-06260-045: RNCC: 3 | RNVC: 2

13 May 1983

3040-01-153-7745
Bell Crank Support

011537745
65415-11101-042: RNCC: 3 | RNVC: 2

16 May 1983

3040-01-154-1782
Rigid Connecting Link

011541782
65410-00014-068: RNCC: 3 | RNVC: 2

20 May 1983

3040-01-154-8102
Valve Shaft

011548102
146571: RNCC: 3 | RNVC: 2

31 May 1983

3040-01-154-6454
Spur Gearshaft

011546454
6321-0130-01: RNCC: 3 | RNVC: 2
10106949: RNCC: 6 | RNVC: 9
6321-0130: RNCC: D | RNVC: 9

28 May 1983

3040-01-155-9126
Counterbalance Weight

011559126
34026396-131: RNCC: 3 | RNVC: 2
34026396-131: RNCC: 5 | RNVC: 9

16 Jun 1983

3040-01-156-9602
Straight Shaft

011569602
1352770: RNCC: 3 | RNVC: 2
1352770: RNCC: 5 | RNVC: 9

28 Jun 1983

3040-01-156-9308
Linear Actuating Cylinder Cap

011569308
74A620044-1003: RNCC: 3 | RNVC: 2
10106952: RNCC: 6 | RNVC: 9

27 Jun 1983

3040-01-157-7934
Straight Shaft

011577934
1816454: RNCC: 3 | RNVC: 2

12 Jul 1983

3040-01-158-3257
Shouldered Shaft

011583257
12321725: RNCC: 3 | RNVC: 2

20 Jul 1983

3040-01-158-6352
Shoe

011586352
501-4457345 ITEM 7: RNCC: 3 | RNVC: 2

26 Jul 1983

3040-01-159-0930
Helical Gearshaft

011590930
9780470: RNCC: 3 | RNVC: 2
9780470: RNCC: 5 | RNVC: 9
9774412: RNCC: D | RNVC: 9

3 Aug 1983

3040-01-159-4842
Segmented Rotor Brake

011594842
73070: RNCC: 3 | RNVC: 2
2AT922: RNCC: 5 | RNVC: 2
02-540-066: RNCC: 5 | RNVC: 2
73070: RNCC: 5 | RNVC: 9
50850: RNCC: D | RNVC: 9

9 Aug 1983

3040-01-161-5122
Shouldered Shaft

011615122
170671: RNCC: 3 | RNVC: 2

7 Sep 1983

3040-01-161-7655
Fan Shaft

011617655
10510389: RNCC: 3 | RNVC: 2
40143-1: RNCC: 5 | RNVC: 2
40143-1: RNCC: 5 | RNVC: 9

10 Sep 1983

3040-01-161-8220
Shouldered Shaft

011618220
70361-05005-102: RNCC: 3 | RNVC: 2

11 Sep 1983

3040-01-163-1573
Straight Shaft

011631573
460902: RNCC: 3 | RNVC: 9

28 Sep 1983

3040-01-163-8699
Shaft Collar

011638699
RE-B102112: RNCC: 3 | RNVC: 2
ASC1539206: RNCC: 5 | RNVC: 9

8 Oct 1983

3040-01-164-3911
Rigid Connecting Link

011643911
USCAAH003-557: RNCC: 3 | RNVC: 2
A-AH64001-557: RNCC: 3 | RNVC: 2
7-211524001-557: RNCC: 3 | RNVC: 2
55080-557: RNCC: 5 | RNVC: 9
7-211524001-557: RNCC: 5 | RNVC: 9
6038-557: RNCC: 5 | RNVC: 9

16 Oct 1983

3040-01-164-5803
Mechanical Drive Housing

011645803
10501498: RNCC: 3 | RNVC: 2

19 Oct 1983

3040-01-165-7897
Shaft Collar

011657897
R49535: RNCC: 3 | RNVC: 2
R49535: RNCC: 3 | RNVC: 9
R49535: RNCC: 5 | RNVC: 9
R49535: RNCC: 5 | RNVC: 9

4 Nov 1983

3040-01-166-2424
Shouldered Shaft

011662424
2006824-1: RNCC: 3 | RNVC: 9
2006824-1: RNCC: 5 | RNVC: 9
3040PL0667082: RNCC: 6 | RNVC: 9
2006824-1: RNCC: C | RNVC: 1

9 Nov 1983

3040-01-166-3174
Wormwheel Spur Gearshaft

011663174
2040802-2: RNCC: 3 | RNVC: 2
2040802-2: RNCC: 5 | RNVC: 9

9 Nov 1983

3040-01-169-1860
Bell Crank

011691860
214-001-501-1: RNCC: 3 | RNVC: 2

4 Jan 1984

3040-01-166-3328
Rigid Connecting Link

011663328
41001543: RNCC: 3 | RNVC: 2

9 Nov 1983

3040-01-170-9205
Straight Shaft

011709205
H305440: RNCC: 3 | RNVC: 2
H305440: RNCC: 3 | RNVC: 9
330207 ITEM 12: RNCC: 5 | RNVC: 2
330207: RNCC: 5 | RNVC: 9
330207 ITEM 12: RNCC: 5 | RNVC: 9
305440: RNCC: 5 | RNVC: 9
305440: RNCC: 5 | RNVC: 9

31 Jan 1984

3040-01-171-0923
Counterbalance Weight

011710923
9513M61P04: RNCC: 3 | RNVC: 2

3 Feb 1984

3040-01-171-2806
Remote Control Lever

011712806
9946M62P02: RNCC: 3 | RNVC: 2

4 Feb 1984

3040-01-172-9361
Control Cam

011729361
2668956: RNCC: 3 | RNVC: 2
2668956: RNCC: 5 | RNVC: 2

28 Feb 1984

3040-01-173-4640
Linear Actuating Cylinder Assembly Parts Kit

011734640
9-752-100321: RNCC: 3 | RNVC: 9
9-752-100321: RNCC: 5 | RNVC: 2

6 Mar 1984

3040-01-174-5962
Spur Gearshaft

011745962
21X1510X5: RNCC: 3 | RNVC: 2
2AW45: RNCC: 5 | RNVC: 2
2AW45: RNCC: 5 | RNVC: 9

21 Mar 1984

3040-01-174-6655
Shouldered Shaft

011746655
212713: RNCC: 3 | RNVC: 2
212713: RNCC: 5 | RNVC: 9
212713: RNCC: 5 | RNVC: 9

21 Mar 1984

3040-01-175-9462
Counterbalance Weight

011759462
9952M59P01: RNCC: 3 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2
9952M59P01: RNCC: 5 | RNVC: 2

6 Apr 1984

3040-01-176-2835
Straight Shaft

011762835
5740220: RNCC: 3 | RNVC: 2
15006: RNCC: 5 | RNVC: 9

10 Apr 1984

3040-01-174-5068
Shouldered Shaft

011745068
A1162: RNCC: 3 | RNVC: 2
D1154 FIND 34: RNCC: 5 | RNVC: 2
A1162-1: RNCC: 5 | RNVC: 9

20 Mar 1984

3040-01-176-8493
Straight Shaft

011768493
15743: RNCC: 3 | RNVC: 2
V-105: RNCC: 5 | RNVC: 9

17 Apr 1984

3040-01-176-9613
Push-Pull Control Assembly

011769613
130-032-497: RNCC: 3 | RNVC: 2
13216E6328-1: RNCC: 5 | RNVC: 2
130-032-497: RNCC: 5 | RNVC: 9
13216E6328: RNCC: 7 | RNVC: 1

18 Apr 1984

3040-01-180-9172
Nonrotating Shaft Eye Bracket

011809172
13075738: RNCC: 3 | RNVC: 2
13075738: RNCC: 5 | RNVC: 9

5 Jun 1984

3040-01-181-8614
Ball Joint

011818614
AP-2543: RNCC: 3 | RNVC: 2

16 Jun 1984

3040-01-183-6865
Linear Actuating Cylinder Assembly

011836865
12325845: RNCC: 3 | RNVC: 2

8 Jul 1984

3040-01-184-1872
Hydraulic Accumulator Cylinder

011841872
RC254: RNCC: 3 | RNVC: 2

17 Jul 1984

3040-01-185-6354
Shouldered Shaft

011856354
4900T20P01: RNCC: 3 | RNVC: 2

1 Aug 1984

3040-01-186-1393
Motor Brake

011861393
A-41705: RNCC: 3 | RNVC: 2
41705: RNCC: 5 | RNVC: 2

8 Aug 1984

3040-01-186-1371
Shouldered Shaft

011861371
242432: RNCC: 3 | RNVC: 2
242432: RNCC: 5 | RNVC: 2

8 Aug 1984

3040-01-138-8135
Manual Control Lever

011388135
MC14730: RNCC: 3 | RNVC: 2
MC14730: RNCC: 5 | RNVC: 9
MC14730: RNCC: 5 | RNVC: 9
10106900: RNCC: 6 | RNVC: 9

21 Sep 1982

3040-01-167-2836
Straight Shaft

011672836
8625736: RNCC: 3 | RNVC: 2
5740382: RNCC: 5 | RNVC: 2
8625736: RNCC: 5 | RNVC: 9

24 Nov 1983

3040-01-177-2941
Flexible Shaft Assembly Core

011772941
75A603508-2001: RNCC: 3 | RNVC: 2
DS23/2-125.100: RNCC: 5 | RNVC: 2
DS23/2-125.125: RNCC: 5 | RNVC: 9
75A603508-2001: RNCC: 5 | RNVC: 9

22 Apr 1984

3040-01-178-5055
Rigid Connecting Link

011785055
7-311518010: RNCC: 3 | RNVC: 2
7-311518010: RNCC: 5 | RNVC: 9

5 May 1984

3040-01-179-5076
Shouldered Shaft

011795076
P202481: RNCC: 3 | RNVC: 2
P202481: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-5080
Shouldered Shaft

011795080
P204614N: RNCC: 3 | RNVC: 2
P204614N: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-5094
Remote Control Lever

011795094
P302941: RNCC: 3 | RNVC: 2
P302941: RNCC: 3 | RNVC: 9

19 May 1984

3040-01-179-9222
Bell Crank

011799222
12332232: RNCC: 3 | RNVC: 2
13211E9410: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-179-9889
Shouldered Shaft

011799889
REC49501: RNCC: 3 | RNVC: 2
D20-1-1 ITEM 18: RNCC: 5 | RNVC: 2
ASC1537568: RNCC: 5 | RNVC: 9

23 May 1984

3040-01-179-9223
Bell Crank

011799223
12332239: RNCC: 3 | RNVC: 2
13211E9412: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-180-2992
Control Cam

011802992
16106612N: RNCC: 3 | RNVC: 2
16106612N: RNCC: 3 | RNVC: 9
16106612: RNCC: 5 | RNVC: 9

25 May 1984

3040-01-176-5998
Hub Clamp

011765998
30-00243-002: RNCC: 3 | RNVC: 2
30-00243-002: RNCC: 5 | RNVC: 2

13 Apr 1984

3040-01-149-4783
Rigid Connecting Link

011494783
65410-00014-067: RNCC: 3 | RNVC: 2

21 Mar 1983

3040-01-156-9134
Control Quadrant Shaft

011569134
4L5937-1: RNCC: 3 | RNVC: 2
4L5937-1: RNCC: 5 | RNVC: 9

27 Jun 1983

3040-01-152-7838
Linear Actuating Cylinder Piston

011527838
4674924-0001: RNCC: 3 | RNVC: 2
522-4674924 ITEM 1: RNCC: 5 | RNVC: 2
37-33-7064: RNCC: 5 | RNVC: 9
522-4674924: RNCC: D | RNVC: 9

7 May 1983

3040-01-154-4048
Shouldered Shaft

011544048
536R563H01: RNCC: 3 | RNVC: 2

25 May 1983

3040-01-154-9976
Shouldered Shaft

011549976
10501229: RNCC: 3 | RNVC: 2

4 Jun 1983

3040-01-156-0824
Flap Shaft Assembly

011560824
2022616-10-2: RNCC: 3 | RNVC: 2
2022616-10-2: RNCC: 5 | RNVC: 9
10318124: RNCC: 6 | RNVC: 9

19 Jun 1983

3040-01-156-0825
Flap Shaft Assembly

011560825
2022616-5-2: RNCC: 3 | RNVC: 2
2022616-5-2: RNCC: 5 | RNVC: 9
2022616-5-1: RNCC: E | RNVC: 8
2022616-5-1: RNCC: E | RNVC: 8

19 Jun 1983

3040-01-166-1185
Cam

011661185
8922970: RNCC: 3 | RNVC: 2
B8922970: RNCC: 5 | RNVC: 2
PC5180323: RNCC: 5 | RNVC: 9
K5180323: RNCC: 5 | RNVC: 9
5180323: RNCC: 5 | RNVC: 9
PC8922970: RNCC: 5 | RNVC: 9
K-8922970: RNCC: 5 | RNVC: 9
5180323: RNCC: 5 | RNVC: 9

8 Nov 1983

3040-01-167-8326
Pawl

011678326
12524384: RNCC: 3 | RNVC: 2
465-4384: RNCC: 5 | RNVC: 2
465-4384: RNCC: 5 | RNVC: 9

7 Dec 1983

3040-01-177-9201
Rigid Connecting Link

011779201
75A613630-1001: RNCC: 3 | RNVC: 2
75A613630: RNCC: D | RNVC: 9

28 Apr 1984

3040-01-178-9928
Shaft Retaining Plate

011789928
B135709-1: RNCC: 3 | RNVC: 2

12 May 1984

3040-01-179-1410
Mechanical Drive Housing

011791410
13211E8708: RNCC: 3 | RNVC: 2
13211E8708: RNCC: 3 | RNVC: 2

16 May 1984

3040-01-179-6183
Manual Control Lever

011796183
2247G1255: RNCC: 3 | RNVC: 2
372-D-238: RNCC: 5 | RNVC: 9
2247G1255: RNCC: 5 | RNVC: 9
327-D-238: RNCC: C | RNVC: 1

19 May 1984

3040-01-179-7029
Rigid Connecting Link

011797029
75A460003-1005: RNCC: 3 | RNVC: 2
75A460003-1005: RNCC: 5 | RNVC: 2
75A460003-1005: RNCC: 5 | RNVC: 9
75A460003-1005: RNCC: 5 | RNVC: 9

20 May 1984

3040-01-179-9211
Straight Shaft

011799211
12325793: RNCC: 3 | RNVC: 2
13211E9402: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-179-9220
Bell Crank

011799220
12332097-1: RNCC: 3 | RNVC: 2
13211E9407: RNCC: 5 | RNVC: 9

22 May 1984

3040-01-129-8476
Bell Crank

011298476
65410-03110-044: RNCC: 3 | RNVC: 2

12 Apr 1982

3040-01-130-3761
Pawl

011303761
139B-18C: RNCC: 3 | RNVC: 2

21 Apr 1982

3040-01-130-3762
Rigid Connecting Link

011303762
74A733030-2001: RNCC: 3 | RNVC: 2
3930AS522: RNCC: 3 | RNVC: 2
74A733030-2001: RNCC: 5 | RNVC: 2
74A733030-2001: RNCC: 5 | RNVC: 2
74A733030-2001: RNCC: 5 | RNVC: 2
74A733030-2001: RNCC: 5 | RNVC: 2
10106874: RNCC: 6 | RNVC: 9
PL74A733030: RNCC: D | RNVC: 9
74A733030: RNCC: D | RNVC: 9

21 Apr 1982

3040-01-130-6865
Bevel Gearshaft

011306865
2040872-1: RNCC: 3 | RNVC: 2
2040872-1: RNCC: 5 | RNVC: 9
10106877: RNCC: 6 | RNVC: 9
2040872: RNCC: D | RNVC: 9

28 Apr 1982

3040-01-131-0600
Rigid Connecting Link

011310600
65219-09041-041: RNCC: 3 | RNVC: 2

3 May 1982

3040-01-133-7136
Shouldered Shaft

011337136
460011: RNCC: 3 | RNVC: 2
460011: RNCC: 3 | RNVC: 9
460011: RNCC: 5 | RNVC: 9
46001: RNCC: 5 | RNVC: 9
453700-9: RNCC: 5 | RNVC: 9
453700: RNCC: D | RNVC: 9

19 Jun 1982

3040-01-135-1355
Shouldered Shaft

011351355
65396-12208-102: RNCC: 3 | RNVC: 2
665396-12208-102: RNCC: C | RNVC: 1

18 Jul 1982

3040-01-135-2207
Remote Control Lever

011352207
16181: RNCC: 3 | RNVC: 2

20 Jul 1982

3040-01-139-9900
Body Hub

011399900
12313010: RNCC: 3 | RNVC: 2
12313010: RNCC: 5 | RNVC: 9

7 Oct 1982

3040-01-140-6605
Mechanical Drive Housing

011406605
62568: RNCC: 3 | RNVC: 2

16 Oct 1982

3040-01-140-8701
Brake Assortment

011408701
6-2011900: RNCC: 3 | RNVC: 2
2-01190: RNCC: 5 | RNVC: 2
2-1190: RNCC: 5 | RNVC: 9

20 Oct 1982

3040-01-141-3708
Straight Shaft

011413708
1145-133-1: RNCC: 3 | RNVC: 2

27 Oct 1982

3040-01-142-9052
Bell Crank

011429052
65414-03105-051: RNCC: 3 | RNVC: 2

22 Nov 1982

3040-01-141-7812
Shaft Collar

011417812
NA1035: RNCC: 3 | RNVC: 2
PL6.0SL-3 ITEM35B: RNCC: 5 | RNVC: 2

4 Nov 1982

3040-01-143-3374
Counterbalance Weight

011433374
4069T98P06: RNCC: 3 | RNVC: 2

2 Dec 1982

3040-01-142-8751
Shouldered Shaft

011428751
132D1906: RNCC: 3 | RNVC: 2
10106924: RNCC: 6 | RNVC: 9

22 Nov 1982

3040-01-143-9971
Shouldered Shaft

011439971
74A800616-2005: RNCC: 3 | RNVC: 2
10106929: RNCC: 6 | RNVC: 9
74A800616-2003: RNCC: C | RNVC: 1

13 Dec 1982

3040-01-144-2527
Manual Control Lever

011442527
Z144B046: RNCC: 3 | RNVC: 2

16 Dec 1982

3040-01-144-4263
Counterbalance Weight

011444263
4055T34P01: RNCC: 3 | RNVC: 2

20 Dec 1982

3040-01-144-4877
Shaft Retaining Plate

011444877
13211E3034: RNCC: 3 | RNVC: 2

21 Dec 1982

3040-01-144-8217
Shouldered Shaft

011448217
111295D: RNCC: 3 | RNVC: 2
111295D: RNCC: 5 | RNVC: 9

30 Dec 1982

3040-01-144-6357
Shouldered Shaft

011446357
1315270: RNCC: 3 | RNVC: 2
1315270: RNCC: 5 | RNVC: 9

27 Dec 1982

3040-01-144-9542
Remote Control Lever

011449542
517-660700: RNCC: 3 | RNVC: 2
5-17-6607: RNCC: 3 | RNVC: 9

31 Dec 1982

3040-01-148-2629
Mechanical Drive Housing

011482629
176211B: RNCC: 3 | RNVC: 9
176211B00: RNCC: 5 | RNVC: 2

3 Mar 1983

3040-01-148-1513
Rigid Connecting Link

011481513
65410-00014-063: RNCC: 3 | RNVC: 2

1 Mar 1983

3040-01-149-1015
Linear Actuating Cylinder Assembly

011491015
H-095-DUZ: RNCC: 3 | RNVC: 9

15 Mar 1983

3040-01-145-2751
Rigid Connecting Link

011452751
65410-00014-051: RNCC: 3 | RNVC: 2

8 Jan 1983

3040-01-150-4724
Coupling Shaft

011504724
BL-10214-1: RNCC: 3 | RNVC: 2

5 Apr 1983

3040-01-151-3532
Shouldered Shaft

011513532
037-71940: RNCC: 3 | RNVC: 2
037-71940-0: RNCC: 5 | RNVC: 2

16 Apr 1983

3040-01-151-5646
Load Stop Collar

011515646
8N3256: RNCC: 3 | RNVC: 2

19 Apr 1983

3040-01-151-0886
Worm Shaft

011510886
722125: RNCC: 3 | RNVC: 2

12 Apr 1983

3040-01-151-7758
Bra Magnet Assembly

011517758
K080127-002: RNCC: 3 | RNVC: 2
K80127-2: RNCC: 5 | RNVC: 9
647108181: RNCC: 5 | RNVC: 9

22 Apr 1983

3040-01-151-3939
Linear Actuating Cylinder Head

011513939
32831: RNCC: 3 | RNVC: 2
144EX114: RNCC: 5 | RNVC: 2
144EX114: RNCC: 5 | RNVC: 9

16 Apr 1983

3040-01-152-2529
Pawl

011522529
12317047: RNCC: 3 | RNVC: 2
12297073: RNCC: E | RNVC: 8

29 Apr 1983

3040-01-152-0944
Bell Crank

011520944
74A635607-1003: RNCC: 3 | RNVC: 2
74A635607-1003: RNCC: 5 | RNVC: 2
74A635607-1001: RNCC: 5 | RNVC: 9
10106946: RNCC: 6 | RNVC: 9

27 Apr 1983

3040-01-153-1483
Cylinder Hoist Stop

011531483
4674891-0012: RNCC: 3 | RNVC: 2
4674891-0012: RNCC: 3 | RNVC: 2
522-4674891 ITEM 12: RNCC: 5 | RNVC: 2
37-33-7848: RNCC: 5 | RNVC: 9
508-4674154 ITE: RNCC: C | RNVC: 1
522-4674891: RNCC: D | RNVC: 9

13 May 1983

3040-01-152-9849
Rigid Connecting Link

011529849
75A427108-1001: RNCC: 3 | RNVC: 9
75A427108-1001: RNCC: 5 | RNVC: 2
75A427108-1001: RNCC: C | RNVC: 1

11 May 1983

Load More Results