What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 133 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 133of 575

3040-01-251-1636
Control Cam

012511636
1-085-044: RNCC: 3 | RNVC: 2

13 Mar 1987

3040-01-251-7711
Straight Shaft

012517711
1199-R-3346: RNCC: 3 | RNVC: 2
1199-R-3346: RNCC: 5 | RNVC: 9

24 Mar 1987

3040-01-251-8873
Counterbalance Weight

012518873
A334A196-110: RNCC: 3 | RNVC: 2

25 Mar 1987

3040-01-198-4363
Counterbalance Weight

011984363
1285M93P01: RNCC: 3 | RNVC: 2

9 Jan 1985

3040-01-200-8944
Counterbalance Weight

012008944
8049969-007: RNCC: 3 | RNVC: 2
X8049969-007: RNCC: 5 | RNVC: 9
8049969-007: RNCC: 5 | RNVC: 9

10 Feb 1985

3040-01-209-0767
Shouldered Shaft

012090767
232523001: RNCC: 3 | RNVC: 2
232523001: RNCC: 3 | RNVC: 9

23 May 1985

3040-01-210-4350
Linear Actuating Cylinder Piston Rod

012104350
77264292-1-37: RNCC: 3 | RNVC: 9
150-PR001-N0325: RNCC: C | RNVC: 1

12 Jun 1985

3040-01-197-8285
Linear Actuating Cylinder Assembly

011978285
348 6087: RNCC: 3 | RNVC: 2

29 Dec 1984

3040-01-200-5631
Straight Shaft

012005631
6-810-001902: RNCC: 3 | RNVC: 2
6-810-001902: RNCC: 5 | RNVC: 2
6-810-001902: RNCC: 5 | RNVC: 2
2CD725: RNCC: 5 | RNVC: 2
2CD725: RNCC: 5 | RNVC: 9

5 Feb 1985

3040-01-226-6091
Shouldered Shaft

012266091
876436C93: RNCC: 3 | RNVC: 2
876436C93: RNCC: 3 | RNVC: 9
876436C93: RNCC: 5 | RNVC: 2
876436C92: RNCC: 5 | RNVC: 9

20 Feb 1986

3040-01-226-8028
Shouldered Shaft

012268028
1369290: RNCC: 3 | RNVC: 2
1369290: RNCC: 5 | RNVC: 9

22 Feb 1986

3040-01-227-2161
Remote Control Lever

012272161
12313563: RNCC: 3 | RNVC: 2
12313563: RNCC: 3 | RNVC: 2
12313563: RNCC: 5 | RNVC: 2
12313563: RNCC: 8 | RNVC: 1

1 Mar 1986

3040-01-227-1236
Rigid Connecting Link

012271236
701654: RNCC: 3 | RNVC: 2

28 Feb 1986

3040-01-221-5606
Shouldered Shaft

012215606
1476650: RNCC: 3 | RNVC: 2
1476650: RNCC: 5 | RNVC: 9

29 Nov 1985

3040-01-221-9324
Counterbalance Weight

012219324
8019131-035: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-222-1838
Counterbalance Weight

012221838
8019131-011: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-228-4309
Shaft Collar

012284309
3-214-5-00-901-03: RNCC: 3 | RNVC: 2
3 214 5 00 901: RNCC: 5 | RNVC: 9
3-214-5-00-901-03: RNCC: 5 | RNVC: 9
3 214 5 00 901: RNCC: D | RNVC: 9

18 Mar 1986

3040-01-229-1349
Manual Control Lever

012291349
41-311-73: RNCC: 3 | RNVC: 2

26 Mar 1986

3040-01-235-2374
Linear Actuating Cylinder Assembly

012352374
Q85-772B: RNCC: 3 | RNVC: 2
Q85-772: RNCC: 5 | RNVC: 9
2D60561PK-002: RNCC: 5 | RNVC: 9
2D60561PK-004: RNCC: 7 | RNVC: 2

26 Jun 1986

3040-01-187-3132
Counterbalance Weight

011873132
301-332-453-0: RNCC: 3 | RNVC: 2
301-332-442-0: RNCC: 5 | RNVC: 2
301-332-442-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-189-2970
Bell Crank

011892970
9511M22P01: RNCC: 3 | RNVC: 2
9511M22P01: RNCC: 5 | RNVC: 9

30 Apr 2014

3040-01-189-3255
Straight Shaft

011893255
16103324: RNCC: 3 | RNVC: 2
16103324: RNCC: 3 | RNVC: 9

14 Sep 1984

3040-01-189-3406
Rigid Connecting Link

011893406
75A667342-2001: RNCC: 3 | RNVC: 2
75A667342-2001: RNCC: 5 | RNVC: 2
75A667342-2001: RNCC: 5 | RNVC: 9
75A667342: RNCC: D | RNVC: 9

14 Sep 1984

3040-01-189-6406
Remote Control Lever

011896406
12302679-1: RNCC: 3 | RNVC: 2
12302679: RNCC: D | RNVC: 9

18 Sep 1984

3040-01-191-4155
Shaft Collar

011914155
16103323: RNCC: 3 | RNVC: 2
16103323: RNCC: 3 | RNVC: 9
16103313 PIECE 2: RNCC: 5 | RNVC: 9
16103313 PIECE 2: RNCC: C | RNVC: 1

7 Oct 1984

3040-01-191-5679
Counterbalance Weight

011915679
952B927-2: RNCC: 3 | RNVC: 2
952B927-2: RNCC: 5 | RNVC: 9

10 Oct 1984

3040-01-191-8934
Rigid Connecting Link

011918934
7566-6206-G: RNCC: 3 | RNVC: 2
7566-6206: RNCC: 3 | RNVC: 2
LE162-0056-6206: RNCC: 5 | RNVC: 2
SR11578A-6206: RNCC: 5 | RNVC: 9
LE162-0056: RNCC: 7 | RNVC: 1

13 Oct 1984

3040-01-192-1804
Push-Pull Control Assembly

011921804
D068357-002-120: RNCC: 3 | RNVC: 9
7-246-000977: RNCC: 5 | RNVC: 2
4063-050-0305: RNCC: 5 | RNVC: 2
D068357-002-120: RNCC: 5 | RNVC: 9
6-294-003997: RNCC: D | RNVC: 9

17 Oct 1984

3040-01-192-5612
Hydraulic Cyl Gland

011925612
1173626C1: RNCC: 3 | RNVC: 9
299896: RNCC: 5 | RNVC: 2
332405: RNCC: 5 | RNVC: 9
1173626C1: RNCC: C | RNVC: 1

23 Oct 1984

3040-01-192-8358
Manual Control Lever

011928358
L59088: RNCC: 3 | RNVC: 2

26 Oct 1984

3040-01-192-6087
Rigid Connecting Link

011926087
933143C1: RNCC: 3 | RNVC: 9

23 Oct 1984

3040-01-194-0423
Control Shaft

011940423
J197222: RNCC: 3 | RNVC: 2
B20089K023: RNCC: 5 | RNVC: 9
H20089K001 ITEM 22: RNCC: 5 | RNVC: 9

9 Nov 1984

3040-01-194-2491
Counterbalance Weight

011942491
952B927-3: RNCC: 3 | RNVC: 2
952B927-3: RNCC: 5 | RNVC: 9

11 Nov 1984

3040-01-195-6830
Steam Cylind Lining

011956830
UA-22: RNCC: 3 | RNVC: 2
4A22-AP: RNCC: 5 | RNVC: 2
A1497-1 PIECE 2: RNCC: 5 | RNVC: 9
A1497-1: RNCC: D | RNVC: 9

1 Dec 1984

3040-01-197-3686
Straight Shaft

011973686
139602: RNCC: 3 | RNVC: 2
234544 ITEM 11: RNCC: 5 | RNVC: 9

20 Dec 1984

3040-01-196-7679
Shaft Retaining Plate

011967679
3448-039: RNCC: 3 | RNVC: 2

14 Dec 1984

3040-01-197-3728
Accumulator Cap

011973728
27222: RNCC: 3 | RNVC: 2
95-26965 ITEM 9: RNCC: 5 | RNVC: 2
95-26965: RNCC: D | RNVC: 9

20 Dec 1984

3040-01-197-5954
Link Assy

011975954
70400-02301-042: RNCC: 3 | RNVC: 2
70400-02301-041: RNCC: 5 | RNVC: 9
3040PL1954195: RNCC: 6 | RNVC: 9

24 Dec 1984

3040-01-198-0673
Rigid Connecting Link

011980673
12329034-1: RNCC: 3 | RNVC: 2
12329034-1: RNCC: 5 | RNVC: 2
12329034: RNCC: D | RNVC: 9

4 Jan 1985

3040-01-198-0346
Remote Control Lever

011980346
0731C0099: RNCC: 3 | RNVC: 2
0731C0099: RNCC: 5 | RNVC: 2
7XA5N: RNCC: 5 | RNVC: 9
0731C0099: RNCC: 5 | RNVC: 9
7XA5N: RNCC: C | RNVC: 1

4 Jan 1985

3040-01-198-3690
Shouldered Shaft

011983690
161504-2: RNCC: 3 | RNVC: 2

7 Jan 1985

3040-01-198-4362
Counterbalance Weight

011984362
1285M94P02: RNCC: 3 | RNVC: 2

9 Jan 1985

3040-01-198-8754
Shaft Retaining Plate

011988754
290079: RNCC: 3 | RNVC: 9
WLM290079: RNCC: 5 | RNVC: 2
2CK25: RNCC: 5 | RNVC: 2
290079: RNCC: 5 | RNVC: 2
290079: RNCC: 5 | RNVC: 2
2CK25: RNCC: 5 | RNVC: 9
9-734-100626: RNCC: 5 | RNVC: 9

15 Jan 1985

3040-01-199-6754
Shaft Retaining Plate

011996754
6-705-010375: RNCC: 3 | RNVC: 2
2CD692: RNCC: 5 | RNVC: 2
2CD692: RNCC: 5 | RNVC: 9

24 Jan 1985

3040-01-199-7948
Shouldered Shaft

011997948
4674710-0024: RNCC: 3 | RNVC: 2
520-4674710 ITEM 24: RNCC: 5 | RNVC: 2
87511-1424 ITEM 24: RNCC: 5 | RNVC: 2
87511-1424: RNCC: D | RNVC: 9
520-4674710: RNCC: D | RNVC: 9

25 Jan 1985

3040-01-200-8947
Counterbalance Weight

012008947
8049969-002: RNCC: 3 | RNVC: 2
8049969-002: RNCC: 5 | RNVC: 2
8049969-002: RNCC: 5 | RNVC: 9
X8049969-002: RNCC: 5 | RNVC: 9

10 Feb 1985

3040-01-200-8950
Counterbalance Weight

012008950
8049969-005: RNCC: 3 | RNVC: 2
8049969-005: RNCC: 5 | RNVC: 2
8049969-005: RNCC: 5 | RNVC: 2
8049969-005: RNCC: 5 | RNVC: 2
X8049969-005: RNCC: 5 | RNVC: 9
8049969-005: RNCC: 5 | RNVC: 9

10 Feb 1985

3040-01-200-8707
Shouldered Shaft

012008707
35322429: RNCC: 3 | RNVC: 2

10 Feb 1985

3040-01-201-2091
Shaft Collar

012012091
5749959-43: RNCC: 3 | RNVC: 2
562-5749959-43: RNCC: 5 | RNVC: 2
5749959-43: RNCC: 5 | RNVC: 9

14 Feb 1985

3040-01-201-2366
Body Hub

012012366
352982: RNCC: 3 | RNVC: 2
352982: RNCC: 5 | RNVC: 9

14 Feb 1985

3040-01-201-2124
Remote Control Lever

012012124
5127379: RNCC: 3 | RNVC: 2

14 Feb 1985

3040-01-201-8034
Linear Actuating Cylinder Assembly

012018034
11784619-1: RNCC: 1 | RNVC: 2
BT0100001: RNCC: 3 | RNVC: 2
11784619: RNCC: 3 | RNVC: 2

22 Feb 1985

3040-01-201-8162
Shouldered Shaft

012018162
3166204-4: RNCC: 3 | RNVC: 2
3166204-4: RNCC: 5 | RNVC: 9

22 Feb 1985

3040-01-202-3231
Counterbalance Weight

012023231
8050049-007: RNCC: 3 | RNVC: 9
X8050049-007: RNCC: 5 | RNVC: 9

28 Feb 1985

3040-01-203-5218
Rigid Connecting Link

012035218
7-311516078-5: RNCC: 3 | RNVC: 2
7-311516078-5: RNCC: 3 | RNVC: 9

15 Mar 1985

3040-01-204-6336
Control Cam

012046336
3035-352: RNCC: 3 | RNVC: 2

28 Mar 1985

3040-01-204-2709
Shouldered Shaft

012042709
L3612205-005: RNCC: 3 | RNVC: 2

24 Mar 1985

3040-01-205-8949
Shaft

012058949
203103: RNCC: 3 | RNVC: 2

12 Apr 1985

3040-01-206-2075
Rigid Connecting Link

012062075
16P3102-1: RNCC: 3 | RNVC: 2
16P3102-1: RNCC: 8 | RNVC: 2

15 Apr 1985

3040-01-207-3360
Bell Crank

012073360
65-13743-16: RNCC: 3 | RNVC: 2
65-13743-16: RNCC: 5 | RNVC: 2

30 Apr 1985

3040-01-208-9287
Shouldered Shaft

012089287
S15-44431: RNCC: 3 | RNVC: 9
S15-44431: RNCC: 5 | RNVC: 2

21 May 1985

3040-01-209-4560
Shouldered Shaft

012094560
A0929D: RNCC: 3 | RNVC: 9
V-1507 AND V-1508 LETTER 0: RNCC: 5 | RNVC: 9
V-1507: RNCC: D | RNVC: 9
V-1508: RNCC: D | RNVC: 9

30 May 1985

3040-01-209-5025
Shouldered Shaft

012095025
5007478: RNCC: 3 | RNVC: 2

31 May 1985

3040-01-209-9040
Spur Gearshaft

012099040
722747: RNCC: 3 | RNVC: 2

5 Jun 1985

3040-01-209-9967
Straight Shaft

012099967
707720: RNCC: 3 | RNVC: 2

6 Jun 1985

3040-01-210-6591
Worm Shaft

012106591
718700: RNCC: 3 | RNVC: 2

15 Jun 1985

3040-01-211-3967
Spur Gearshaft

012113967
713338A: RNCC: 3 | RNVC: 2

26 Jun 1985

3040-01-211-3588
Nonrotating Shaft Eye Bracket

012113588
1175260-2: RNCC: 3 | RNVC: 2

25 Jun 1985

3040-01-211-9700
Shouldered Shaft

012119700
RG54669: RNCC: 3 | RNVC: 2

4 Jul 1985

3040-01-213-8256
Ball Joint

012138256
3201-7014-5: RNCC: 3 | RNVC: 2
2BV576: RNCC: 5 | RNVC: 2
01057120: RNCC: 5 | RNVC: 9
2BV576: RNCC: 5 | RNVC: 9

1 Aug 1985

3040-01-214-1697
Body Hub

012141697
3501581-1: RNCC: 3 | RNVC: 2
3501581-1: RNCC: 5 | RNVC: 9
10183252: RNCC: 6 | RNVC: 9

6 Aug 1985

3040-01-214-3176
Spur Gearshaft

012143176
23018065: RNCC: 3 | RNVC: 2

8 Aug 1985

3040-01-214-3840
Shouldered Shaft

012143840
3078B13: RNCC: 3 | RNVC: 2
3166RA PIECE 17: RNCC: 5 | RNVC: 9
3166RA: RNCC: D | RNVC: 9

9 Aug 1985

3040-01-215-6642
Multiple Disk Brake

012156642
55100: RNCC: 3 | RNVC: 2
1.60034: RNCC: 5 | RNVC: 2
2CK607: RNCC: 5 | RNVC: 2
2CK607: RNCC: 5 | RNVC: 9
55100: RNCC: 5 | RNVC: 9

29 Aug 1985

3040-01-214-7101
Shouldered Shaft

012147101
034-70814-0: RNCC: 3 | RNVC: 2
SD-00851-D: RNCC: 5 | RNVC: 9
SD-00851-D IT3: RNCC: 5 | RNVC: 9

15 Aug 1985

3040-01-218-4143
Straight Shaft

012184143
5000243: RNCC: 3 | RNVC: 2

11 Oct 1985

3040-01-218-8513
Remote Control Lever

012188513
6593000137: RNCC: 3 | RNVC: 9
6593000137: RNCC: 5 | RNVC: 2
6-593-000144: RNCC: 5 | RNVC: 9

19 Oct 1985

3040-01-218-5274
Ball Joint

012185274
AU43285: RNCC: 3 | RNVC: 2
SPF4S: RNCC: 5 | RNVC: 2
AJ43285: RNCC: 5 | RNVC: 2
1222-260: RNCC: 5 | RNVC: 2
AJ43285: RNCC: 5 | RNVC: 9
AU43285: RNCC: 5 | RNVC: 9

14 Oct 1985

3040-01-219-1540
Counterbalance Weight

012191540
8019129-012: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1542
Counterbalance Weight

012191542
8019129-014: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1543
Counterbalance Weight

012191543
8019129-015: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-6637
Multiple Gears Gearshaft

012196637
188C1916P1: RNCC: 3 | RNVC: 2
188C1916: RNCC: D | RNVC: 9

31 Oct 1985

3040-01-220-3922
Counterbalance Weight

012203922
8019131-013: RNCC: 3 | RNVC: 9

13 Nov 1985

3040-01-221-1261
Control Cam

012211261
2665023: RNCC: 3 | RNVC: 2

23 Nov 1985

3040-01-221-7825
Rigid Connecting Link

012217825
311-5750041-015: RNCC: 3 | RNVC: 2
5750041-015: RNCC: C | RNVC: 1
311-5750041: RNCC: D | RNVC: 9

3 Dec 1985

3040-01-227-2706
Straight Shaft

012272706
320-0075: RNCC: 3 | RNVC: 2
C-1-347 ITEM 3: RNCC: 5 | RNVC: 9
320-0075: RNCC: 5 | RNVC: 9

1 Mar 1986

3040-01-227-7608
Shouldered Shaft

012277608
5191255-2: RNCC: 3 | RNVC: 2
5191255-2: RNCC: 5 | RNVC: 2

7 Mar 1986

3040-01-221-9312
Counterbalance Weight

012219312
8019131-023: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-228-0305
Straight Shaft

012280305
5191109-2: RNCC: 3 | RNVC: 2
5191109-2: RNCC: 5 | RNVC: 2
5191109-2: RNCC: 5 | RNVC: 9

13 Mar 1986

3040-01-228-1083
Shouldered Shaft

012281083
609-4676626 ITEM 6: RNCC: 3 | RNVC: 2
609-4676626: RNCC: D | RNVC: 9

14 Mar 1986

3040-01-222-4501
Straight Shaft

012224501
1435960: RNCC: 3 | RNVC: 2
1435960: RNCC: 5 | RNVC: 9

12 Dec 1985

3040-01-221-9325
Counterbalance Weight

012219325
8019131-037: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-222-6342
Counterbalance Weight

012226342
8019131-001: RNCC: 3 | RNVC: 9

14 Dec 1985

3040-01-229-1855
Spur Gearshaft

012291855
367701-1: RNCC: 3 | RNVC: 2
367701: RNCC: 5 | RNVC: 9

27 Mar 1986

3040-01-224-6241
Shouldered Shaft

012246241
B20035D042: RNCC: 3 | RNVC: 2

17 Jan 1986

3040-01-224-6456
Control Cam

012246456
2672999: RNCC: 3 | RNVC: 2

19 Jan 1986

3040-01-232-2512
Manual Control Lever

012322512
82A5027A1274: RNCC: 3 | RNVC: 2

9 May 1986

3040-01-231-9898
Remote Control Lever

012319898
1452900: RNCC: 3 | RNVC: 2
1452900: RNCC: 5 | RNVC: 9

7 May 1986

3040-01-232-6146
Control Cam

012326146
NF203084-1: RNCC: 3 | RNVC: 9

17 May 1986

3040-01-232-3271
Shouldered Shaft

012323271
3173752-2: RNCC: 3 | RNVC: 2
3173752-1: RNCC: 5 | RNVC: 9

11 May 1986

3040-01-232-4038
Rigid Connecting Link

012324038
75A321205-2003: RNCC: 3 | RNVC: 2
75A321205-2003: RNCC: 5 | RNVC: 2
7A321205-2003: RNCC: 5 | RNVC: 9

12 May 1986

3040-01-232-6936
Flexible Shaft Assembly

012326936
1569659: RNCC: 3 | RNVC: 9
FADET11DZ5: RNCC: 5 | RNVC: 2
1569668: RNCC: 5 | RNVC: 2
1569668: RNCC: 5 | RNVC: 9
1569659: RNCC: C | RNVC: 1
1569668: RNCC: C | RNVC: 1

19 May 1986

3040-01-232-9181
Bell Crank

012329181
65415-11201-043: RNCC: 3 | RNVC: 2

21 May 1986

3040-01-233-7768
Rigid Connecting Link

012337768
8722186-23: RNCC: 3 | RNVC: 2
8722186: RNCC: D | RNVC: 9

3 Jun 1986

3040-01-234-2859
Remote Control Lever

012342859
3904632: RNCC: 3 | RNVC: 2

12 Jun 1986

3040-01-225-1445
Straight Shaft

012251445
10225-207-1: RNCC: 3 | RNVC: 2

29 Jan 1986

3040-01-236-1263
Valve Pinion Shaft

012361263
6503-86 PIECE 132: RNCC: 3 | RNVC: 2
6503-86: RNCC: D | RNVC: 9

12 Jul 1986

3040-01-236-6658
Shaft Assembly

012366658
406 260 03 38: RNCC: 3 | RNVC: 2
406 260 03 38: RNCC: 5 | RNVC: 2
406 260 03 38: RNCC: 5 | RNVC: 9

21 Jul 1986

3040-01-237-0216
Shouldered Shaft

012370216
SM-C-803244: RNCC: 3 | RNVC: 2

24 Jul 1986

3040-01-237-6127
Piston Link

012376127
2664431: RNCC: 3 | RNVC: 2

3 Aug 1986

3040-01-238-7011
Shaft Collar

012387011
3A001-1367: RNCC: 3 | RNVC: 2
3A001-1367: RNCC: 5 | RNVC: 2

19 Aug 1986

3040-01-240-3757
Remote Control Lever

012403757
707-071-2: RNCC: 3 | RNVC: 2

12 Sep 1986

3040-01-241-8925
Linear Actuating Cylinder Piston

012418925
ES-74896: RNCC: 3 | RNVC: 2
74887 ITEM 2: RNCC: 5 | RNVC: 2
74896: RNCC: 5 | RNVC: 9

3 Oct 1986

3040-01-242-2935
Shouldered Shaft

012422935
419 553 71 12: RNCC: 3 | RNVC: 2

9 Oct 1986

3040-01-242-7978
Linear Actuating Cylinder

012427978
13211E3009: RNCC: 3 | RNVC: 2

17 Oct 1986

3040-01-243-0074
Manual Control Lever

012430074
04053: RNCC: 3 | RNVC: 2

20 Oct 1986

3040-01-242-8065
Remote Control Lever

012428065
68A520737-1003: RNCC: 3 | RNVC: 2
68A520737-1001: RNCC: 5 | RNVC: 9
68A520736-1001: RNCC: 5 | RNVC: 9

17 Oct 1986

3040-01-243-6648
Straight Shaft

012436648
12127-21: RNCC: 3 | RNVC: 9
12127-21: RNCC: 5 | RNVC: 9
12127-21: RNCC: C | RNVC: 1

31 Oct 1986

3040-01-244-8285
Manual Control Lever

012448285
16607696: RNCC: 3 | RNVC: 2
16 607 696: RNCC: 3 | RNVC: 2
16607696: RNCC: 3 | RNVC: 9

20 Nov 1986

3040-01-248-3886
Shouldered Shaft

012483886
610533-44-8: RNCC: 3 | RNVC: 9
610533-44-8: RNCC: C | RNVC: 1

23 Jan 1987

3040-01-248-6546
Mechanical Drive Housing

012486546
2253-8: RNCC: 3 | RNVC: 2
2253-8: RNCC: 5 | RNVC: 9

28 Jan 1987

3040-01-248-6422
Sliding Shoe

012486422
558: RNCC: 3 | RNVC: 2
AW 6196 ITEM 24: RNCC: 5 | RNVC: 2
AW 6196/24: RNCC: 5 | RNVC: 2
BW7224 ITEM 12: RNCC: 5 | RNVC: 2
558PB: RNCC: C | RNVC: 1

28 Jan 1987

3040-01-249-1513
Remote Control Lever

012491513
147739-1: RNCC: 3 | RNVC: 2
10106985: RNCC: 6 | RNVC: 9

6 Feb 1987

3040-01-249-3383
Shouldered Shaft

012493383
12349618: RNCC: 3 | RNVC: 2
12349618: RNCC: 5 | RNVC: 9
12349618: RNCC: 8 | RNVC: 1

10 Feb 1987

3040-01-249-6571
Shaft Collar

012496571
0373B0009M040A: RNCC: 3 | RNVC: 2
B7642K: RNCC: 5 | RNVC: 9

14 Feb 1987

3040-01-250-1667
Rigid Connecting Link

012501667
419 553 71 28: RNCC: 3 | RNVC: 2

26 Feb 1987

3040-01-250-0028
Nonrotating Shaft Eye Bracket

012500028
12275434: RNCC: 3 | RNVC: 2

21 Feb 1987

3040-01-250-5640
Bell Crank

012505640
L3011890-011: RNCC: 3 | RNVC: 2
L3011890-001: RNCC: 5 | RNVC: 9

3 Mar 1987

3040-01-250-4228
Shouldered Shaft

012504228
602481-10-J: RNCC: 3 | RNVC: 9
602481-10-J: RNCC: C | RNVC: 1

1 Mar 1987

3040-01-249-9500
Nonrotating Shaft Eye Bracket

012499500
142D6677: RNCC: 3 | RNVC: 2
10177040: RNCC: 6 | RNVC: 9

20 Feb 1987

3040-01-251-7530
Pneumatic Actuator Cylinder Housing

012517530
2793668-101: RNCC: 3 | RNVC: 2
2793668-101: RNCC: 3 | RNVC: 9
10198639: RNCC: 6 | RNVC: 9

24 Mar 1987

3040-01-251-8996
Straight Shaft

012518996
F405-10811-3: RNCC: 3 | RNVC: 2

26 Mar 1987

3040-01-251-8876
Counterbalance Weight

012518876
A334A200-103: RNCC: 3 | RNVC: 2

25 Mar 1987

3040-01-251-9009
Straight Shaft

012519009
F405-10811-5: RNCC: 3 | RNVC: 2

26 Mar 1987

3040-01-216-0627
Counterbalance Weight

012160627
9632M85P03: RNCC: 3 | RNVC: 2

6 Sep 1985

3040-01-219-1548
Counterbalance Weight

012191548
8019129-020: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-4662
Control Cam

012194662
263-1188-00: RNCC: 3 | RNVC: 2

26 Oct 1985

3040-01-219-6579
Shouldered Shaft

012196579
824-0020: RNCC: 3 | RNVC: 2
824-0000: RNCC: 5 | RNVC: 9

31 Oct 1985

3040-01-219-6245
Pawl

012196245
AW5052A0016: RNCC: 3 | RNVC: 9
82A5052A0016: RNCC: 5 | RNVC: 2

30 Oct 1985

3040-01-220-2103
Valve Shaft Assembly

012202103
96884-1: RNCC: 3 | RNVC: 2
96884-1: RNCC: 3 | RNVC: 2
96884: RNCC: 5 | RNVC: 9
96884: RNCC: D | RNVC: 9

9 Nov 1985

3040-01-220-3699
Shouldered Shaft

012203699
428203: RNCC: 3 | RNVC: 2

13 Nov 1985

3040-01-220-1179
Counterbalance Weight

012201179
784616-2: RNCC: 3 | RNVC: 2

8 Nov 1985

3040-01-220-3991
Linear Actuating Cylinder Piston

012203991
622706: RNCC: 3 | RNVC: 2

13 Nov 1985

3040-01-220-7011
Rigid Connecting Link

012207011
1400570: RNCC: 3 | RNVC: 2
1400570: RNCC: 5 | RNVC: 9

16 Nov 1985

3040-01-223-3684
Torque Bracket

012233684
2663848: RNCC: 3 | RNVC: 2
2663848: RNCC: 5 | RNVC: 2

28 Dec 1985

3040-01-186-6481
Shouldered Shaft

011866481
C5-45-2992: RNCC: 3 | RNVC: 2

12 Aug 1984

3040-01-186-6901
Rigid Connecting Link

011866901
406-010-426-105: RNCC: 3 | RNVC: 2
406-010-426-101: RNCC: 5 | RNVC: 9

13 Aug 1984

3040-01-186-7992
Ball Joint

011867992
000-50141-0007: RNCC: 3 | RNVC: 2
10513715: RNCC: 5 | RNVC: 2
50141-7: RNCC: 5 | RNVC: 9

15 Aug 1984

3040-01-186-1563
Spur-Worm Gearshaft

011861563
2042238-1: RNCC: 3 | RNVC: 2
2042238-1: RNCC: 5 | RNVC: 9
10318215: RNCC: 6 | RNVC: 9

8 Aug 1984

3040-01-187-1222
Manual Control Lever

011871222
1120414C91: RNCC: 3 | RNVC: 9

18 Aug 1984

3040-01-187-9235
Remote Control Lever

011879235
300356-103: RNCC: 3 | RNVC: 2
300356-101: RNCC: 5 | RNVC: 2

27 Aug 1984

3040-01-188-8762
Rigid Connecting Link

011888762
4900-5117: RNCC: 3 | RNVC: 2
B889100-117: RNCC: 3 | RNVC: 2
75J618002-117: RNCC: 5 | RNVC: 2
75B618002-117: RNCC: 7 | RNVC: 2
4900: RNCC: D | RNVC: 9

8 Sep 1984

3040-01-189-2165
Spur Gearshaft

011892165
242447: RNCC: 3 | RNVC: 2
242447: RNCC: 5 | RNVC: 9

13 Sep 1984

3040-01-190-7126
Rigid Connecting Link

011907126
75A663601-1001: RNCC: 3 | RNVC: 2
75A663601-1001: RNCC: 5 | RNVC: 9
75A663601: RNCC: D | RNVC: 9

29 Sep 1984

3040-01-190-7127
Rigid Connecting Link

011907127
75A663604-1003: RNCC: 3 | RNVC: 2
75A663604: RNCC: D | RNVC: 9

29 Sep 1984

3040-01-191-2726
Linear Actuating Cylinder Head

011912726
28381: RNCC: 3 | RNVC: 2

7 Oct 1984

3040-01-191-4466
Rigid Connecting Link

011914466
MD31623-89: RNCC: 3 | RNVC: 2
MD31623-89: RNCC: 5 | RNVC: 2
MD31623-89: RNCC: 5 | RNVC: 9

7 Oct 1984

3040-01-191-5680
Counterbalance Weight

011915680
952B928-1: RNCC: 3 | RNVC: 2
952B928-1: RNCC: 5 | RNVC: 9

10 Oct 1984

3040-01-191-8790
Straight Shaft

011918790
91374-001: RNCC: 3 | RNVC: 2
91374-001: RNCC: 3 | RNVC: 9
91374-001: RNCC: 5 | RNVC: 9
121301-21.21: RNCC: 5 | RNVC: 9
LB91374: RNCC: 5 | RNVC: 9
121301-21.21: RNCC: 5 | RNVC: 9
LB91374: RNCC: 5 | RNVC: 9
LB-91374: RNCC: C | RNVC: 1

13 Oct 1984

3040-01-192-3673
Speedometer-Tachometer Drive Adapter

011923673
2538608: RNCC: 3 | RNVC: 2
12339963: RNCC: 3 | RNVC: 2
12339963: RNCC: 5 | RNVC: 2
3040011923673: RNCC: 5 | RNVC: 9
J3212893: RNCC: 5 | RNVC: 9
2538608: RNCC: 5 | RNVC: 9
3212893: RNCC: 5 | RNVC: 9
3040PL0841758: RNCC: 6 | RNVC: 9
3040011923673: RNCC: 6 | RNVC: 9

19 Oct 1984

3040-01-192-6069
Linear Actuating Cylinder

011926069
929635C92: RNCC: 3 | RNVC: 2
929635C92: RNCC: 3 | RNVC: 9
929635C92: RNCC: 5 | RNVC: 2

23 Oct 1984

3040-01-192-6913
Spur Gearshaft

011926913
9501M59P05: RNCC: 3 | RNVC: 2
9501M59P05: RNCC: 5 | RNVC: 2
9501M59P05: RNCC: 5 | RNVC: 2
9501M59P05: RNCC: 5 | RNVC: 2
9501M59P05: RNCC: 5 | RNVC: 2
9501M59P05: RNCC: 5 | RNVC: 2
9501M59P05: RNCC: 5 | RNVC: 9
9501M59P03: RNCC: 5 | RNVC: 9

25 Oct 1984

3040-01-193-8116
Linear Actuating Cylinder Assembly

011938116
68A733018-1011: RNCC: 3 | RNVC: 2

8 Nov 1984

3040-01-195-5303
Control Cam

011955303
3035-250: RNCC: 3 | RNVC: 2
3035-250: RNCC: 5 | RNVC: 9

4 May 2012

3040-01-195-4444
Manual Control Lever

011954444
A7556.001.259: RNCC: 3 | RNVC: 1
20213 NO. 33: RNCC: 5 | RNVC: 1
A7556.001.147: RNCC: 5 | RNVC: 1
A7556.001.259: RNCC: 5 | RNVC: 9
A7556.001.147: RNCC: 5 | RNVC: 9
20213 NO. 33: RNCC: 5 | RNVC: 9
20193PC33: RNCC: C | RNVC: 1
20213: RNCC: D | RNVC: 9

29 Nov 1984

3040-01-196-1224
Shouldered Shaft

011961224
017B0501F084A: RNCC: 3 | RNVC: 2
017B0501: RNCC: 5 | RNVC: 1
B-1633 PIECE 9: RNCC: 5 | RNVC: 9
B-1633: RNCC: D | RNVC: 9

7 Dec 1984

3040-01-196-1487
Rotating Shaft Eye Bracket

011961487
R59962: RNCC: 3 | RNVC: 2
R59962: RNCC: 5 | RNVC: 9

7 Dec 1984

3040-01-197-4609
Linear Actuating Cylinder Piston

011974609
WD0021016D4: RNCC: 3 | RNVC: 2
WE-00210-16R PC004: RNCC: 5 | RNVC: 9
WD0021016D4: RNCC: 5 | RNVC: 9

21 Dec 1984

3040-01-197-8555
Rigid Connecting Link

011978555
8722186-21: RNCC: 3 | RNVC: 2
8722186: RNCC: D | RNVC: 9

29 Dec 1984

3040-01-198-5699
Shaft Collar

011985699
12338452: RNCC: 3 | RNVC: 2
12338452: RNCC: 3 | RNVC: 2
5583592: RNCC: 5 | RNVC: 9
5583592-B: RNCC: D | RNVC: 9

10 Jan 1985

3040-01-199-4288
Shouldered Shaft

011994288
9-632-100916: RNCC: 3 | RNVC: 2
2CD896: RNCC: 5 | RNVC: 2
2CD896: RNCC: 5 | RNVC: 9

22 Jan 1985

3040-01-199-5741
Shouldered Shaft

011995741
155-117-10: RNCC: 3 | RNVC: 2

23 Jan 1985

3040-01-194-6734
Shaft Retaining Plate

011946734
2-163-593-02: RNCC: 3 | RNVC: 2
V2-163-593-02: RNCC: 5 | RNVC: 2
0-161-000-49 REVG PC 051: RNCC: 5 | RNVC: 9

16 Nov 1984

3040-01-200-1015
Remote Control Lever

012001015
5584263: RNCC: 3 | RNVC: 2
12339452-1: RNCC: 3 | RNVC: 2
5342PL0813097: RNCC: 6 | RNVC: 9
5584263-D: RNCC: D | RNVC: 9
12339452: RNCC: D | RNVC: 9

30 Jan 1985

3040-01-200-5681
Rigid Connecting Link

012005681
8722186-3: RNCC: 3 | RNVC: 2
8722186: RNCC: D | RNVC: 9

6 Feb 1985

3040-01-200-8484
Shouldered Shaft

012008484
8049893-001: RNCC: 3 | RNVC: 2
8049893-001: RNCC: 5 | RNVC: 9
X8049893-001: RNCC: 5 | RNVC: 9

10 Feb 1985

3040-01-201-2125
Straight Shaft

012012125
V0-141-035-01: RNCC: 3 | RNVC: 2
0-001-011-35 PC013: RNCC: 5 | RNVC: 9
0-141-035-01: RNCC: 5 | RNVC: 9
0-141-035-01: RNCC: 5 | RNVC: 9

14 Feb 1985

3040-01-201-1618
Lock Ring

012011618
A1020F224: RNCC: 3 | RNVC: 2

13 Feb 1985

3040-01-201-1147
Manual Control Lever

012011147
13214E2931: RNCC: 3 | RNVC: 2

12 Feb 1985

3040-01-201-4819
Rigid Connecting Link

012014819
12336827: RNCC: 3 | RNVC: 2

19 Feb 1985

3040-01-201-9594
Shouldered Shaft

012019594
A02R2851-8: RNCC: 3 | RNVC: 2

26 Feb 1985

3040-01-202-4158
Linear Actuating Cylinder

012024158
348 5153: RNCC: 3 | RNVC: 2

2 Mar 1985

3040-01-202-5424
Rigid Connecting Link

012025424
4F61290-105A: RNCC: 3 | RNVC: 2

3 Mar 1985

3040-01-202-5630
Shouldered Shaft

012025630
1131282: RNCC: 3 | RNVC: 2
314314 PIECE 65: RNCC: 5 | RNVC: 2
314314: RNCC: D | RNVC: 9

4 Mar 1985

3040-01-206-5719
Manual Control Lever

012065719
74A800611-2037: RNCC: 3 | RNVC: 2
10106976: RNCC: 6 | RNVC: 9

19 Apr 1985

3040-01-210-1311
Straight Shaft

012101311
1889891 ITEM 20: RNCC: 3 | RNVC: 2
PL1889891 ITEM 20: RNCC: 5 | RNVC: 2
0851-296: RNCC: 5 | RNVC: 9
1889768PC16: RNCC: C | RNVC: 1
0851-240: RNCC: C | RNVC: 1
PL1889891: RNCC: D | RNVC: 9
1889891: RNCC: D | RNVC: 9

7 Jun 1985

3040-01-210-3311
Rigid Connecting Link

012103311
745425: RNCC: 3 | RNVC: 2
730666: RNCC: 5 | RNVC: 9

11 Jun 1985

3040-01-210-4347
Straight Shaft

012104347
2370-0026-1: RNCC: 3 | RNVC: 2
2370-0026-1: RNCC: 5 | RNVC: 9
B11405 FIND 6: RNCC: 5 | RNVC: 9
B11405: RNCC: 5 | RNVC: 9
B11405: RNCC: 5 | RNVC: 9
MS3409DJ36A-10P: RNCC: C | RNVC: 1

12 Jun 1985

3040-01-210-9709
Shaft Retaining Plate

012109709
11625019: RNCC: 3 | RNVC: 2

20 Jun 1985

3040-01-211-7141
Linear Actuating Cylinder Piston

012117141
6S131 ITEM 3: RNCC: 3 | RNVC: 2
6S131C3: RNCC: 5 | RNVC: 2
6S131: RNCC: D | RNVC: 9

30 Jun 1985

3040-01-211-9002
Linear Actuating Cylinder Assembly

012119002
CST18251: RNCC: 3 | RNVC: 2
TS18251ST: RNCC: 3 | RNVC: 9
RWT40: RNCC: 5 | RNVC: 9

3 Jul 1985

3040-01-213-1695
Linear Actuating Cylinder Head

012131695
6-372-002424: RNCC: 3 | RNVC: 2
2CT153: RNCC: 5 | RNVC: 2
2CT153: RNCC: 5 | RNVC: 9

24 Jul 1985

3040-01-213-4495
Shaft Collar

012134495
3-214-5-00-801-06: RNCC: 3 | RNVC: 9
3-214-5-00-901-06: RNCC: 5 | RNVC: 9
5WR1101-6: RNCC: 5 | RNVC: 9
4M1048A10 PIECE 22: RNCC: 5 | RNVC: 9
4M1048A10 PIECE 22: RNCC: C | RNVC: 1
4M1048A10: RNCC: D | RNVC: 9

26 Jul 1985

3040-01-213-2339
Rigid Connecting Link

012132339
123L40018-601: RNCC: 3 | RNVC: 2
123L40018-601: RNCC: 5 | RNVC: 9
123L40018-1: RNCC: E | RNVC: 8

24 Jul 1985

3040-01-213-7599
Mechanical Drive Housing

012137599
6-372-002269: RNCC: 3 | RNVC: 2
2CT147: RNCC: 5 | RNVC: 2
2CT147: RNCC: 5 | RNVC: 9

30 Jul 1985

3040-01-214-3836
Straight Shaft

012143836
1 3/16 DIAX17IN-FCA23-TYP III: RNCC: 3 | RNVC: 2
1 3/16DIAX17IN-TYP IIXIII: RNCC: 5 | RNVC: 2
1-3/16DIAX19IN-: RNCC: C | RNVC: 1

9 Aug 1985

3040-01-214-3837
Straight Shaft

012143837
6-810-001916: RNCC: 3 | RNVC: 2
2CT207: RNCC: 5 | RNVC: 2
2CT207: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-214-9300
Shouldered Shaft

012149300
23018232: RNCC: 3 | RNVC: 2
23018232: RNCC: 8 | RNVC: 2

17 Aug 1985

3040-01-214-5792
Brake Backing Plate

012145792
23018079: RNCC: 3 | RNVC: 2

13 Aug 1985

3040-01-215-0675
Rotating Shaft Eye Bracket

012150675
12321044: RNCC: 3 | RNVC: 2

21 Aug 1985

3040-01-215-5495
Shouldered Shaft

012155495
3084184-1: RNCC: 3 | RNVC: 2
3084184-1: RNCC: 5 | RNVC: 2

26 Aug 1985

3040-01-215-6488
Control Cable Assembly

012156488
LE161-0023-0013: RNCC: 3 | RNVC: 2

28 Aug 1985

3040-01-215-4317
Straight Shaft

012154317
551AS113-1: RNCC: 3 | RNVC: 2
551AS113: RNCC: D | RNVC: 9

24 Aug 1985

3040-01-215-5269
Rigid Connecting Link

012155269
128LM10033-601: RNCC: 3 | RNVC: 2
128LM10033-601: RNCC: 5 | RNVC: 9

26 Aug 1985

3040-01-215-1721
Linear Actuating Cylinder Cap

012151721
6-753-000591: RNCC: 3 | RNVC: 2
2CD709: RNCC: 5 | RNVC: 2
2CD709: RNCC: 5 | RNVC: 9

22 Aug 1985

3040-01-215-3353
Linear Actuating Cylinder

012153353
41375A: RNCC: 3 | RNVC: 2
41375: RNCC: 5 | RNVC: 9

23 Aug 1985

3040-01-219-2085
Linear Actuating Cylinder Assembly Parts Kit

012192085
1543252C1: RNCC: 3 | RNVC: 2
G105548: RNCC: 5 | RNVC: 9

23 Oct 1985

3040-01-216-4197
Rigid Connecting Link

012164197
5000395: RNCC: 3 | RNVC: 2

10 Sep 1985

3040-01-216-4891
Rigid Connecting Link

012164891
4059359: RNCC: 3 | RNVC: 2
4059359: RNCC: 5 | RNVC: 2
4059359: RNCC: 5 | RNVC: 9

11 Sep 1985

3040-01-217-7564
Rigid Connecting Link

012177564
3825060: RNCC: 3 | RNVC: 2
3325060: RNCC: 5 | RNVC: 9
3825060: RNCC: 5 | RNVC: 9
3825060: RNCC: 5 | RNVC: 9

2 Oct 1985

3040-01-219-1464
Straight Shaft

012191464
8251763: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1531
Counterbalance Weight

012191531
8019129-003: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1539
Counterbalance Weight

012191539
8019129-011: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1536
Counterbalance Weight

012191536
8019129-008: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-220-3701
Shouldered Shaft

012203701
2808372-1: RNCC: 3 | RNVC: 2

13 Nov 1985

3040-01-222-6343
Counterbalance Weight

012226343
8019131-002: RNCC: 3 | RNVC: 9

14 Dec 1985

3040-01-222-7586
Straight Shaft

012227586
13214E2109: RNCC: 3 | RNVC: 2

16 Dec 1985

3040-01-223-1597
Mechanical Drive Housing

012231597
7606-8190-4: RNCC: 3 | RNVC: 2
7606-8190-4: RNCC: 5 | RNVC: 9

22 Dec 1985

3040-01-220-9945
Shouldered Shaft

012209945
11498: RNCC: 3 | RNVC: 2
17TN665: RNCC: 5 | RNVC: 2
2CD537: RNCC: 5 | RNVC: 9
17TN665: RNCC: 5 | RNVC: 9
11498: RNCC: 5 | RNVC: 9

22 Nov 1985

3040-01-220-8935
Shouldered Shaft

012208935
2669894: RNCC: 3 | RNVC: 2

21 Nov 1985

3040-01-221-3447
Straight Shaft

012213447
61-415-0092-1: RNCC: 3 | RNVC: 2

28 Nov 1985

3040-01-220-4129
Rigid Connecting Link

012204129
4065416: RNCC: 3 | RNVC: 2
4065416: RNCC: 5 | RNVC: 2
3040PL0667773: RNCC: 6 | RNVC: 9

13 Nov 1985

3040-01-221-9317
Counterbalance Weight

012219317
8019131-028: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-223-8792
Rigid Connecting Link

012238792
12313397: RNCC: 3 | RNVC: 2
12313397: RNCC: 5 | RNVC: 2
12313397: RNCC: 5 | RNVC: 2

9 Jan 1986

3040-01-223-5172
Linear Actuating Cylinder Piston

012235172
9221030: RNCC: 3 | RNVC: 9
9221030: RNCC: 5 | RNVC: 2

30 Dec 1985

3040-01-224-6477
Shouldered Shaft

012246477
2670164: RNCC: 3 | RNVC: 2

19 Jan 1986

3040-01-224-8861
Control Cam

012248861
2670420: RNCC: 3 | RNVC: 2

24 Jan 1986

3040-01-225-2303
Control Cam

012252303
68A582026-2012: RNCC: 3 | RNVC: 2

30 Jan 1986

3040-01-226-7632
Transmission Range Clutch Hub

012267632
83-14875: RNCC: 3 | RNVC: 2
83-14875: RNCC: 3 | RNVC: 9
83-14875: RNCC: 5 | RNVC: 2
83-14875: RNCC: 5 | RNVC: 9
83-14875: RNCC: 5 | RNVC: 9
83-14875: RNCC: 5 | RNVC: 9

21 Feb 1986

3040-01-227-0738
Counterbalance Weight

012270738
25196: RNCC: 3 | RNVC: 2
25196: RNCC: 5 | RNVC: 9

27 Feb 1986

3040-01-227-7684
Spur Gearshaft

012277684
5191209-2: RNCC: 3 | RNVC: 2
5191209-2: RNCC: 5 | RNVC: 9
5191209-2: RNCC: 5 | RNVC: 9

7 Mar 1986

3040-01-227-7607
Shouldered Shaft

012277607
5191246-2: RNCC: 3 | RNVC: 2
5191246-2: RNCC: 5 | RNVC: 1

7 Mar 1986

3040-01-228-4200
Shouldered Shaft

012284200
5191163-2: RNCC: 3 | RNVC: 2
5191163-2: RNCC: 5 | RNVC: 2

18 Mar 1986

3040-01-229-2777
Linear Actuating Cylinder Assembly

012292777
62283-207: RNCC: 3 | RNVC: 2
2CMNP1N-2 1/2-11-S3500: RNCC: 5 | RNVC: 2
2CM NP1N-2.5-11: RNCC: C | RNVC: 1

29 Mar 1986

3040-01-230-3715
Straight Shaft

012303715
2-600-211-314-00: RNCC: 3 | RNVC: 2
2AL658: RNCC: 5 | RNVC: 2
2AL658: RNCC: 5 | RNVC: 9
G0510-1852-027 ITEM 7: RNCC: 5 | RNVC: 9
2-600-211-281: RNCC: 5 | RNVC: 9
G0510-1852-027: RNCC: D | RNVC: 9

12 Apr 1986

3040-01-231-6877
Coupling Shaft

012316877
622943: RNCC: 3 | RNVC: 2
370248: RNCC: C | RNVC: 1

2 May 1986

3040-01-232-4413
Pressure Regulator Shaft And Spring Assembly

012324413
34629: RNCC: 3 | RNVC: 2

14 May 1986

3040-01-232-8949
Drive Adapter

012328949
21206-02: RNCC: 3 | RNVC: 2
38988-2: RNCC: 5 | RNVC: 2

21 May 1986

3040-01-234-6150
Linear Actuating Cylinder Assembly

012346150
1D96660PK-001: RNCC: 3 | RNVC: 2
1D96660PK: RNCC: 5 | RNVC: 9

17 Jun 1986

3040-01-235-2724
Friction Lining

012352724
519619-82: RNCC: 3 | RNVC: 2
66548Y: RNCC: 5 | RNVC: 2
66548: RNCC: 5 | RNVC: 2

27 Jun 1986

3040-01-235-4069
Pneumatic Accumulator

012354069
7324001-01: RNCC: 3 | RNVC: 9
7324001-01: RNCC: C | RNVC: 1

29 Jun 1986

3040-01-236-7304
Remote Control Lever

012367304
352 070 54 23: RNCC: 3 | RNVC: 2
352 070 52 23: RNCC: 5 | RNVC: 9
352 070 52 23: RNCC: 5 | RNVC: 9

22 Jul 1986

3040-01-238-0194
Filler Opening Cap

012380194
518-00019: RNCC: 3 | RNVC: 2

8 Aug 1986

3040-01-238-1317
Rigid Connecting Link

012381317
75A190040-2003: RNCC: 3 | RNVC: 2

11 Aug 1986

3040-01-238-8741
Straight Shaft

012388741
9RG003310-9: RNCC: 3 | RNVC: 2

21 Aug 1986

3040-01-238-8767
Piston Ring

012388767
DS-940602: RNCC: 3 | RNVC: 2
DS-940602: RNCC: 5 | RNVC: 2
871294: RNCC: 5 | RNVC: 9

21 Aug 1986

3040-01-239-3682
Straight Shaft

012393682
870318101: RNCC: 3 | RNVC: 2
8703181-03: RNCC: C | RNVC: 1

28 Aug 1986

3040-01-241-8847
Breakover Stand Shaft Assembly

012418847
8U56106-404: RNCC: 3 | RNVC: 2

3 Oct 1986

3040-01-243-3829
Shouldered Shaft

012433829
12349918: RNCC: 3 | RNVC: 2
12349918: RNCC: 8 | RNVC: 1

24 Oct 1986

3040-01-243-3874
Remote Control Lever

012433874
12349732-1: RNCC: 3 | RNVC: 2

24 Oct 1986

3040-01-244-4809
Hydraulic Accumulator Cylinder

012444809
04060: RNCC: 3 | RNVC: 2
04060: RNCC: 5 | RNVC: 2
05857 ITEM 4: RNCC: 5 | RNVC: 9
05857: RNCC: D | RNVC: 9

14 Nov 1986

3040-01-245-3064
Rigid Connecting Link

012453064
L3223675-011: RNCC: 3 | RNVC: 2
L3223675-011: RNCC: 5 | RNVC: 2
L3223675-011: RNCC: 5 | RNVC: 2
L3223675-001: RNCC: 5 | RNVC: 9

26 Nov 1986

3040-01-246-3079
Linear Actuating Cylinder Cap

012463079
361493: RNCC: 3 | RNVC: 2

12 Dec 1986

3040-01-246-6877
Bell Crank

012466877
7-311518005-3: RNCC: 3 | RNVC: 2
7-311518005-3: RNCC: 5 | RNVC: 9
7-311518005: RNCC: E | RNVC: 8

18 Dec 1986

3040-01-247-6054
Controllable Swashplate

012476054
733759: RNCC: 3 | RNVC: 2

9 Jan 1987

3040-01-248-3890
Shouldered Shaft

012483890
610531-20-A: RNCC: 3 | RNVC: 9
610531-20-A: RNCC: 5 | RNVC: 2

23 Jan 1987

3040-01-248-3892
Shouldered Shaft

012483892
604947-46-RA: RNCC: 3 | RNVC: 9
604947-46-RA: RNCC: C | RNVC: 1

23 Jan 1987

3040-01-249-1260
Shouldered Shaft

012491260
147735-1: RNCC: 3 | RNVC: 2
147735-1: RNCC: 5 | RNVC: 9
10106984: RNCC: 6 | RNVC: 9

6 Feb 1987

3040-01-248-9460
Control Cam

012489460
70216-02405-142: RNCC: 3 | RNVC: 2
70216-02405: RNCC: D | RNVC: 9

2 Feb 1987

3040-01-249-3382
Shouldered Shaft

012493382
12354712: RNCC: 3 | RNVC: 2
12354712: RNCC: 3 | RNVC: 2
12354712: RNCC: 5 | RNVC: 2
12354712: RNCC: 8 | RNVC: 1

10 Feb 1987

3040-01-249-3385
Shouldered Shaft

012493385
656C0494J030A: RNCC: 3 | RNVC: 2

10 Feb 1987

3040-01-251-4029
Retainin Clip Assy

012514029
AM2791-10-7: RNCC: 3 | RNVC: 2

19 Mar 1987

3040-01-251-8396
Shouldered Shaft

012518396
2B1-2350: RNCC: 3 | RNVC: 2
2D3-1014 ITEM 5: RNCC: C | RNVC: 1

25 Mar 1987

3040-01-251-9669
Straight Shaft

012519669
F405-10811-8: RNCC: 3 | RNVC: 2

27 Mar 1987

3040-01-186-6625
Rigid Connecting Link

011866625
123C40213-601: RNCC: 3 | RNVC: 2
123C40213-601: RNCC: 5 | RNVC: 9

12 Aug 1984

3040-01-187-3135
Counterbalance Weight

011873135
301-510-006-0: RNCC: 3 | RNVC: 2
301-510-006-0: RNCC: 5 | RNVC: 2

21 Aug 1984

3040-01-187-1410
Linear Actuating Cylinder

011871410
26809: RNCC: 3 | RNVC: 2
265-26805 ITEM 2: RNCC: 5 | RNVC: 2

18 Aug 1984

3040-01-188-3744
Counterbalance Weight

011883744
301-315-625-0: RNCC: 3 | RNVC: 2
301-315-625-0: RNCC: 5 | RNVC: 2

2 Sep 1984

3040-01-188-8580
Shouldered Shaft

011888580
704021: RNCC: 3 | RNVC: 2
E-3942 ITEM 125: RNCC: 5 | RNVC: 2
E-3942: RNCC: D | RNVC: 9

8 Sep 1984

3040-01-189-2136
Linear Actuating Cylinder Assembly Parts Kit

011892136
90005870: RNCC: 3 | RNVC: 2
272-2175: RNCC: 5 | RNVC: 9

13 Sep 1984

3040-01-189-2910
Counterbalance Weight

011892910
9524M50P04: RNCC: 3 | RNVC: 2
9524M50P04: RNCC: 5 | RNVC: 9

14 Sep 1984

3040-01-189-2623
Counterbalance Weight

011892623
9524M50P01: RNCC: 3 | RNVC: 2
9524M50P01: RNCC: 5 | RNVC: 2

13 Sep 1984

3040-01-189-8676
Rod Assembly

011898676
123C10230-501: RNCC: 3 | RNVC: 2
123C10230-501: RNCC: 5 | RNVC: 9
123C10230-3: RNCC: C | RNVC: 1
123C10230: RNCC: D | RNVC: 9

20 Sep 1984

3040-01-190-3576
Shouldered Shaft

011903576
0071655: RNCC: 3 | RNVC: 2
0071655: RNCC: 3 | RNVC: 9
C11359/140: RNCC: 5 | RNVC: 2
C11359/140: RNCC: 5 | RNVC: 9

26 Sep 1984

3040-01-190-3575
Shouldered Shaft

011903575
20462-C: RNCC: 3 | RNVC: 2
04060: RNCC: 5 | RNVC: 9

26 Sep 1984

3040-01-190-5711
Rigid Connecting Link

011905711
10084-1: RNCC: 3 | RNVC: 2

28 Sep 1984

3040-01-191-5429
Shouldered Shaft

011915429
85200487: RNCC: 3 | RNVC: 2
85200487: RNCC: 5 | RNVC: 2
85200487: RNCC: 5 | RNVC: 2

10 Oct 1984

3040-01-191-6223
Linear Actuating Cylinder Assembly

011916223
1H000197396: RNCC: 3 | RNVC: 2
AG146144B0: RNCC: 3 | RNVC: 9
1-5F-HLTVS14X1.625: RNCC: 5 | RNVC: 9
1.50F-2HLTV14X1.625: RNCC: 5 | RNVC: 9

11 Oct 1984

3040-01-191-6650
Linear Actuating Cylinder Piston Rod

011916650
299893: RNCC: 3 | RNVC: 2
299893: RNCC: 3 | RNVC: 9
1173622C1: RNCC: 5 | RNVC: 9

11 Oct 1984

3040-01-191-8200
Shouldered Shaft

011918200
T91194-001: RNCC: 3 | RNVC: 2
91194-001: RNCC: 3 | RNVC: 9
91194-001: RNCC: 5 | RNVC: 2
91194-001: RNCC: 5 | RNVC: 9
T91194-001: RNCC: 5 | RNVC: 9
LA91194: RNCC: 5 | RNVC: 9
121301-7.42: RNCC: 5 | RNVC: 9
121301-7.42: RNCC: 5 | RNVC: 9
LA91194: RNCC: 5 | RNVC: 9
LA-91194: RNCC: C | RNVC: 1

12 Oct 1984

3040-01-191-8906
Spur Gearshaft

011918906
2042101-1: RNCC: 3 | RNVC: 2
2042101-1: RNCC: 5 | RNVC: 2
10130546: RNCC: 6 | RNVC: 9
2042101: RNCC: D | RNVC: 9

13 Oct 1984

3040-01-191-8616
Linear Actuating Cylinder Assembly

011918616
35594225: RNCC: 3 | RNVC: 2

13 Oct 1984

3040-01-192-1967
Hub Clamp

011921967
CG1-8: RNCC: 3 | RNVC: 9
13084606: RNCC: 5 | RNVC: 2
13084606: RNCC: 5 | RNVC: 9
167539-2: RNCC: C | RNVC: 1

18 Oct 1984

3040-01-193-3152
Rub Washer Assembly

011933152
412324-05: RNCC: 3 | RNVC: 2

1 Nov 1984

3040-01-193-4684
Manual Control Lever

011934684
5928: RNCC: 3 | RNVC: 2
35370055: RNCC: 5 | RNVC: 2
35126317: RNCC: 5 | RNVC: 2
01086500: RNCC: 5 | RNVC: 2
35370055: RNCC: 5 | RNVC: 2

3 Nov 1984

3040-01-194-0273
Mechanical Drive Housing

011940273
0-080-017-10: RNCC: 3 | RNVC: 2
8-080-000-52 PC005: RNCC: 5 | RNVC: 2
0-080-000-52 PC005: RNCC: 5 | RNVC: 9
0-080-017-10: RNCC: 5 | RNVC: 9

9 Nov 1984

3040-01-194-2932
Shouldered Shaft

011942932
H15037: RNCC: 3 | RNVC: 9
15037: RNCC: 5 | RNVC: 9
15037: RNCC: 5 | RNVC: 9
H15037: RNCC: C | RNVC: 1

12 Nov 1984

3040-01-194-3359
Linear Actuating Cylinder Piston Rod

011943359
6-768-001683: RNCC: 3 | RNVC: 2
2CD714: RNCC: 5 | RNVC: 2
2CD714: RNCC: 5 | RNVC: 9

13 Nov 1984

3040-01-194-6763
Manual Control Lever

011946763
600486: RNCC: 3 | RNVC: 2

16 Nov 1984

3040-01-195-4313
Spur Gearshaft

011954313
870624080: RNCC: 3 | RNVC: 2
3040PL0661331: RNCC: 6 | RNVC: 9

29 Nov 1984

3040-01-196-4535
Nonrotating Shaft Eye Bracket

011964535
074-01-251-01: RNCC: 3 | RNVC: 2

11 Dec 1984

3040-01-197-1747
Shouldered Shaft

011971747
13216E6142-5: RNCC: 3 | RNVC: 9
13216E6142-5: RNCC: 5 | RNVC: 2

19 Dec 1984

3040-01-198-0955
Body Hub

011980955
410037-1: RNCC: 3 | RNVC: 2
300037-1: RNCC: 5 | RNVC: 9
300037: RNCC: 5 | RNVC: 9

4 Jan 1985

3040-01-198-0713
Mechanical Drive Housing

011980713
23045026: RNCC: 3 | RNVC: 2

4 Jan 1985

3040-01-198-0961
Rigid Connecting Link

011980961
PDG7826: RNCC: 3 | RNVC: 9

4 Jan 1985

3040-01-198-9655
Remote Control Lever

011989655
XA-FW-137-2: RNCC: 3 | RNVC: 2
2CF115: RNCC: 5 | RNVC: 2
FW-137: RNCC: 5 | RNVC: 2
XA-FW-137-2: RNCC: 5 | RNVC: 2
XA-FW-137-2: RNCC: 5 | RNVC: 2
2CF115: RNCC: 5 | RNVC: 9
17TN626: RNCC: 5 | RNVC: 9
XA-71-0A: RNCC: D | RNVC: 9

16 Jan 1985

3040-01-199-6586
Straight Shaft

011996586
6-810-001899: RNCC: 3 | RNVC: 2
2CD722: RNCC: 5 | RNVC: 2
2CD722: RNCC: 5 | RNVC: 9

24 Jan 1985

3040-01-199-6718
Linear Actuating Cylinder Piston

011996718
444-00: RNCC: 3 | RNVC: 2
444: RNCC: 5 | RNVC: 9
40273 PIECE 34: RNCC: 5 | RNVC: 9
40273: RNCC: D | RNVC: 9

24 Jan 1985

3040-01-200-4321
Linear Actuating Cylinder Assembly Parts Kit

012004321
2CD402: RNCC: 3 | RNVC: 2
9-752-100506: RNCC: 5 | RNVC: 9
2CD402: RNCC: 5 | RNVC: 9

4 Feb 1985

3040-01-200-7857
Extension Shaft

012007857
384-1388-00: RNCC: 3 | RNVC: 2

9 Feb 1985

3040-01-202-6493
Counterbalance Weight

012026493
8050049-005: RNCC: 3 | RNVC: 9
X8050049-005: RNCC: 5 | RNVC: 9

5 Mar 1985

3040-01-203-4325
Rigid Connecting Link

012034325
75A667126-1003: RNCC: 3 | RNVC: 9
75A667126-1003: RNCC: 5 | RNVC: 2
75A667126-1003: RNCC: 5 | RNVC: 9
75A667126-1003: RNCC: 5 | RNVC: 9
75A667126: RNCC: 5 | RNVC: 9
75A667126: RNCC: D | RNVC: 9

14 Mar 1985

3040-01-204-2710
Shouldered Shaft

012042710
L6312207-005: RNCC: 3 | RNVC: 2

24 Mar 1985

3040-01-204-4536
Rigid Connecting Link

012044536
G108818-1: RNCC: 3 | RNVC: 2
G108818-1: RNCC: 5 | RNVC: 2
G108818-1: RNCC: 5 | RNVC: 9
G108818: RNCC: D | RNVC: 9

27 Mar 1985

3040-01-204-6248
Flapper Door Link

012046248
L6310168-011: RNCC: 3 | RNVC: 2
L6310168-001: RNCC: 5 | RNVC: 9

28 Mar 1985

3040-01-204-7663
Rigid Connecting Link

012047663
L3400198-001: RNCC: 3 | RNVC: 2

29 Mar 1985

3040-01-205-6305
Rigid Connecting Link

012056305
L6410016-003: RNCC: 3 | RNVC: 2

10 Apr 1985

3040-01-205-8770
Manual Control Lever

012058770
115351-30: RNCC: 3 | RNVC: 9
5-4772: RNCC: 5 | RNVC: 2
115351-30: RNCC: 5 | RNVC: 9

12 Apr 1985

3040-01-207-1030
Linear Actuating Cylinder Piston

012071030
284-02: RNCC: 3 | RNVC: 2

28 Apr 1985

3040-01-207-3582
Shouldered Shaft

012073582
27072: RNCC: 3 | RNVC: 2
27072: RNCC: 3 | RNVC: 9
27072: RNCC: 5 | RNVC: 9

1 May 1985

3040-01-207-5677
Shouldered Shaft

012075677
9384654: RNCC: 3 | RNVC: 2

3 May 1985

3040-01-207-6570
Mechanical Drive Housing

012076570
27028: RNCC: 3 | RNVC: 2
27028: RNCC: 3 | RNVC: 9

4 May 1985

3040-01-207-9280
Linear Actuating Cylinder Piston Rod

012079280
6-768-001673: RNCC: 3 | RNVC: 2
2CT198: RNCC: 5 | RNVC: 2
2CT198: RNCC: 5 | RNVC: 9

7 May 1985

3040-01-207-9790
Rigid Connecting Link

012079790
1300750 U: RNCC: 3 | RNVC: 2
1300750 U: RNCC: 5 | RNVC: 9

8 May 1985

3040-01-209-3879
Spline Adapter

012093879
1593588-7: RNCC: 3 | RNVC: 2
81-313100-02: RNCC: 5 | RNVC: 2
1593588-7: RNCC: 5 | RNVC: 9

29 May 1985

3040-01-209-6719
Bell Crank

012096719
L6312204-005: RNCC: 3 | RNVC: 2

4 Jun 1985

3040-01-209-8679
Control Cam

012098679
9376397-1: RNCC: 3 | RNVC: 2
9376397: RNCC: D | RNVC: 9

4 Jun 1985

3040-01-209-8682
Mechanical Drive Housing

012098682
9376477: RNCC: 3 | RNVC: 2

4 Jun 1985

3040-01-210-2823
Rigid Connecting Link

012102823
045-07500-000: RNCC: 3 | RNVC: 2
045-07500-000: RNCC: 3 | RNVC: 9
45-7500: RNCC: 5 | RNVC: 9
3040PL0794779: RNCC: 6 | RNVC: 9
45-7501: RNCC: C | RNVC: 1

11 Jun 1985

3040-01-210-5804
Straight Shaft

012105804
306112: RNCC: 3 | RNVC: 2
305463 ITEM 1: RNCC: 5 | RNVC: 1
305463 ITEM 1: RNCC: 5 | RNVC: 9
306112: RNCC: 5 | RNVC: 9

14 Jun 1985

3040-01-211-1048
Manual Control Lever

012111048
W635700: RNCC: 3 | RNVC: 2
W5656800: RNCC: 5 | RNVC: 9

21 Jun 1985

3040-01-211-2420
Counterbalance Weight

012112420
3046T30P04: RNCC: 3 | RNVC: 2

22 Jun 1985

3040-01-214-3848
Linear Actuating Cylinder Assembly Parts Kit

012143848
642926: RNCC: 3 | RNVC: 2
C642926: RNCC: 5 | RNVC: 2
1125555C1: RNCC: 5 | RNVC: 9
642926: RNCC: 5 | RNVC: 9

9 Aug 1985

3040-01-215-8188
Shaft Assembly Leve

012158188
64653KYA: RNCC: 3 | RNVC: 2
64653: RNCC: 5 | RNVC: 2

1 Sep 1985

3040-01-215-8561
Worm Shaft

012158561
387-3465-3: RNCC: 3 | RNVC: 9
387-3465-3: RNCC: 5 | RNVC: 9
387-3465-3: RNCC: C | RNVC: 1

1 Sep 1985

3040-01-216-2716
Shouldered Shaft

012162716
12309696: RNCC: 3 | RNVC: 2

7 Sep 1985

3040-01-216-4893
Rigid Connecting Link

012164893
4057626: RNCC: 3 | RNVC: 2
4057626: RNCC: 5 | RNVC: 2
4057626: RNCC: 5 | RNVC: 9

11 Sep 1985

3040-01-216-6985
Rigid Connecting Link

012166985
BACR24N4BL327: RNCC: 3 | RNVC: 2
BACR24E4CL-327E: RNCC: 5 | RNVC: 9
BACR24N4BL327BL: RNCC: 5 | RNVC: 9
BACR24E4CL-327E: RNCC: 5 | RNVC: 9
BACR24E: RNCC: D | RNVC: 9
BACR24N: RNCC: D | RNVC: 9

14 Sep 1985

3040-01-217-5773
Rigid Connecting Link

012175773
045-07502-000: RNCC: 3 | RNVC: 2
045-07502-000: RNCC: 3 | RNVC: 9
45-7502: RNCC: 5 | RNVC: 9
3040PL0794770: RNCC: 6 | RNVC: 9

28 Sep 1985

3040-01-216-9419
Counterbalance Weight

012169419
8915: RNCC: 3 | RNVC: 2

19 Sep 1985

3040-01-219-1541
Counterbalance Weight

012191541
8019129-013: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1550
Counterbalance Weight

012191550
8019129-022: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1555
Counterbalance Weight

012191555
8019129-027: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1557
Counterbalance Weight

012191557
8019129-029: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-6720
Shaft Retaining Plate

012196720
1435950: RNCC: 3 | RNVC: 2
1435950: RNCC: 5 | RNVC: 9

31 Oct 1985

3040-01-221-2027
Linear Actuating Cylinder Assembly Parts Kit

012212027
PK3202A005: RNCC: 3 | RNVC: 2

26 Nov 1985

3040-01-221-3718
Linear Actuating Cylinder Assembly

012213718
L117120: RNCC: 3 | RNVC: 2
V100AC: RNCC: C | RNVC: 1
XA59502: RNCC: C | RNVC: 1
L109583: RNCC: C | RNVC: 1
L12627: RNCC: C | RNVC: 1

28 Nov 1985

3040-01-221-9318
Counterbalance Weight

012219318
8019131-029: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-221-9326
Counterbalance Weight

012219326
8019131-038: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-222-2412
Flinger Shaft

012222412
RSN206S: RNCC: 3 | RNVC: 2
RSN206S: RNCC: 5 | RNVC: 2

9 Dec 1985

3040-01-222-3083
Counterbalance Weight

012223083
8019131-021: RNCC: 3 | RNVC: 9

10 Dec 1985

3040-01-222-3835
Linear Actuating Cylinder Assembly

012223835
AG154125C0: RNCC: 3 | RNVC: 2

11 Dec 1985

3040-01-222-9435
Straight Shaft

012229435
2664729: RNCC: 3 | RNVC: 2

20 Dec 1985

3040-01-223-0914
Straight Shaft

012230914
64A98B158-1: RNCC: 3 | RNVC: 2
64A98B158: RNCC: D | RNVC: 9

21 Dec 1985

3040-01-223-3839
Spur Gearshaft

012233839
2671915: RNCC: 3 | RNVC: 2

28 Dec 1985

3040-01-224-0876
Straight Shaft

012240876
40970A: RNCC: 3 | RNVC: 2

12 Jan 1986

3040-01-224-3934
Rigid Connecting Link

012243934
4F23661-125B: RNCC: 3 | RNVC: 2

15 Jan 1986

3040-01-224-5497
Manual Control Lever

012245497
1447190W: RNCC: 3 | RNVC: 2
1447190W: RNCC: 5 | RNVC: 9

17 Jan 1986

3040-01-225-6563
Door Shaft

012256563
5-4-4736: RNCC: 3 | RNVC: 2

6 Feb 1986

3040-01-225-8090
Straight Shaft

012258090
10073: RNCC: 3 | RNVC: 2
10073: RNCC: 5 | RNVC: 9

8 Feb 1986

3040-01-227-1983
Shouldered Shaft

012271983
117D2115-2: RNCC: 3 | RNVC: 2

1 Mar 1986

3040-01-228-2240
Rotor Assembly

012282240
0-080-410-01: RNCC: 3 | RNVC: 2

16 Mar 1986

3040-01-228-3595
Remote Control Lever

012283595
176037-100: RNCC: 3 | RNVC: 2
176037-100: RNCC: 3 | RNVC: 9
176037-100: RNCC: 5 | RNVC: 9

18 Mar 1986

3040-01-229-6301
Linear Actuating Cylinder Assembly

012296301
AG146146C0: RNCC: 3 | RNVC: 2
AG146146C0: RNCC: 5 | RNVC: 9

3 Apr 1986

3040-01-228-5457
Shaft Retaining Plate

012285457
5191373-2: RNCC: 3 | RNVC: 2
5191373-2: RNCC: C | RNVC: 1

18 Mar 1986

3040-01-230-3063
Straight Shaft

012303063
60244-40815-2: RNCC: 3 | RNVC: 2

12 Apr 1986

3040-01-233-3087
Bell Crank Support

012333087
L6410350-009: RNCC: 3 | RNVC: 2
L6410350-009: RNCC: 5 | RNVC: 9

29 May 1986

3040-01-234-4008
Nonrotating Shaft Eye Bracket

012344008
42420-188: RNCC: 3 | RNVC: 2
42420-188: RNCC: 5 | RNVC: 9
42420-188: RNCC: 5 | RNVC: 9

13 Jun 1986

3040-01-233-9852
Shaft Collar

012339852
3161767-11: RNCC: 3 | RNVC: 2
3161767-11: RNCC: 5 | RNVC: 9

5 Jun 1986

3040-01-233-0352
Bracket Mounting

012330352
A3079160: RNCC: 3 | RNVC: 2

23 May 1986

3040-01-238-8826
Remote Control Lever

012388826
DS-830665: RNCC: 3 | RNVC: 9
DS-830665: RNCC: 5 | RNVC: 2
DS-830665: RNCC: 5 | RNVC: 2
830665: RNCC: 5 | RNVC: 9

21 Aug 1986

3040-01-239-3685
Shouldered Shaft

012393685
871283201: RNCC: 3 | RNVC: 2
87183201: RNCC: 5 | RNVC: 9

28 Aug 1986

3040-01-240-3569
Spur Gearshaft

012403569
801341: RNCC: 3 | RNVC: 2
801341: RNCC: 5 | RNVC: 2
801341: RNCC: 5 | RNVC: 2

12 Sep 1986

3040-01-240-6141
Shouldered Shaft

012406141
M8B-21A: RNCC: 3 | RNVC: 2

16 Sep 1986

3040-01-240-7931
Shouldered Shaft

012407931
948F794-1: RNCC: 3 | RNVC: 2
948F794-1: RNCC: 5 | RNVC: 9
948F794-1: RNCC: 5 | RNVC: 9

19 Sep 1986

3040-01-241-3232
Rigid Connecting Link

012413232
D126331: RNCC: 3 | RNVC: 2
D126331: RNCC: 5 | RNVC: 2

24 Sep 1986

3040-01-241-3738
Linear Actuating Cylinder Assembly

012413738
1 1/8 SH-A103: RNCC: 3 | RNVC: 2
ST48D97-1: RNCC: 7 | RNVC: 2

25 Sep 1986

3040-01-242-4595
Remote Control Lever

012424595
419 553 72 13: RNCC: 3 | RNVC: 2

12 Oct 1986

3040-01-243-1024
Remote Control Lever

012431024
9007-DA11: RNCC: 3 | RNVC: 2
A9307-2: RNCC: 3 | RNVC: 9
A9307-2: RNCC: 5 | RNVC: 9
A9307: RNCC: D | RNVC: 9

22 Oct 1986

3040-01-243-3585
Mechanical Drive Housing

012433585
6881979: RNCC: 3 | RNVC: 2
2AX941: RNCC: 5 | RNVC: 2
2AX941: RNCC: 5 | RNVC: 9

24 Oct 1986

3040-01-244-0103
Shouldered Shaft

012440103
176C2552: RNCC: 3 | RNVC: 2

5 Nov 1986

3040-01-245-0244
Rigid Connecting Link

012450244
7-311660015-21: RNCC: 3 | RNVC: 2
7-311660015-21: RNCC: 5 | RNVC: 9

23 Nov 1986

3040-01-245-2522
Rotating Shaft Eye Bracket

012452522
7350779: RNCC: 3 | RNVC: 2

26 Nov 1986

3040-01-245-0282
Control Cam

012450282
42487C: RNCC: 3 | RNVC: 2

23 Nov 1986

3040-01-245-7949
Shouldered Shaft

012457949
2007T72P03: RNCC: 3 | RNVC: 2
207T72P03: RNCC: 5 | RNVC: 9
2007T72: RNCC: D | RNVC: 9

4 Dec 1986

3040-01-245-9891
Manual Control Lever

012459891
97-60-320-11: RNCC: 3 | RNVC: 2
97-60-320-1-1: RNCC: 5 | RNVC: 9

6 Dec 1986

3040-01-248-1514
Counterbalance Weight

012481514
7-311525075-3: RNCC: 3 | RNVC: 2
7-311525075-3: RNCC: 5 | RNVC: 9
7-311525075: RNCC: D | RNVC: 9

16 Jan 1987

3040-01-250-2944
Bell Crank

012502944
75A612602-1001: RNCC: 3 | RNVC: 2

27 Feb 1987

3040-01-250-4308
Spur Gearshaft

012504308
196461-1: RNCC: 3 | RNVC: 2

1 Mar 1987

3040-01-250-7528
Helical Gearshaft

012507528
52298802: RNCC: 3 | RNVC: 2

7 Mar 1987

3040-01-192-4057
Control Cam

011924057
9338496: RNCC: 3 | RNVC: 2
9338496: RNCC: 5 | RNVC: 9

20 Oct 1984

3040-01-192-5692
Straight Shaft

011925692
184622: RNCC: 3 | RNVC: 2
1125523C1: RNCC: 3 | RNVC: 9
184898: RNCC: 5 | RNVC: 9
184894: RNCC: 5 | RNVC: 9

23 Oct 1984

3040-01-188-2979
Control Cam

011882979
30-1000: RNCC: 3 | RNVC: 2
387-3453: RNCC: 5 | RNVC: 2
387-3453: RNCC: 5 | RNVC: 9
387-3453: RNCC: 5 | RNVC: 9

1 Sep 1984

3040-01-248-5109
Linear Actuating Cylinder Piston

012485109
G100441: RNCC: 3 | RNVC: 2

24 Jan 1987

3040-01-248-0529
Shouldered Shaft

012480529
DGR421K0001: RNCC: 3 | RNVC: 1
DGR4350C PT96: RNCC: 5 | RNVC: 1
DGR4350B PT96: RNCC: 5 | RNVC: 1
DGR421K0001: RNCC: 5 | RNVC: 2
DGR421K0001VM: RNCC: 5 | RNVC: 2
DGR4350C PT96VM: RNCC: 5 | RNVC: 2
DGR4350B PT96: RNCC: 5 | RNVC: 2
DGR421K: RNCC: C | RNVC: 1

15 Jan 1987

3040-01-200-9114
Flexible Shaft Assembly

012009114
2001581-2: RNCC: 3 | RNVC: 2

10 Feb 1985

3040-01-200-3585
Bell Crank

012003585
9531M57P01: RNCC: 3 | RNVC: 2
9531M57P01: RNCC: 5 | RNVC: 9
9531M57P01: RNCC: 5 | RNVC: 9
9531M57P01: RNCC: 5 | RNVC: 9
9531M57P01: RNCC: 5 | RNVC: 9

3 Feb 1985

3040-01-186-3395
Shouldered Shaft

011863395
13215E6631: RNCC: 3 | RNVC: 2

9 Aug 1984

3040-01-186-6624
Rigid Connecting Link

011866624
123C10211-601: RNCC: 3 | RNVC: 2
123C10211-601: RNCC: 5 | RNVC: 2
123C10211-601: RNCC: 5 | RNVC: 2
123C10211-601: RNCC: 5 | RNVC: 9

12 Aug 1984

3040-01-187-3124
Counterbalance Weight

011873124
301-315-624-0: RNCC: 3 | RNVC: 2
301-315-624-0: RNCC: 5 | RNVC: 2
301-315-624-0: RNCC: 5 | RNVC: 9

21 Aug 1984

3040-01-187-8234
Counterbalance Weight

011878234
301-510-005-0: RNCC: 3 | RNVC: 2
301-510-005-0: RNCC: 5 | RNVC: 2

25 Aug 1984

3040-01-187-1224
Idler Pulley Cover Assembly

011871224
2238077: RNCC: 3 | RNVC: 2

18 Aug 1984

3040-01-188-8292
Rigid Connecting Link

011888292
5593659: RNCC: 3 | RNVC: 2
12339176: RNCC: 3 | RNVC: 2
5583591: RNCC: 5 | RNVC: 9

8 Sep 1984

3040-01-189-5999
Shouldered Shaft

011895999
4928: RNCC: 3 | RNVC: 2

17 Sep 1984

3040-01-189-8419
Control Cam

011898419
212625: RNCC: 3 | RNVC: 2
212625: RNCC: 5 | RNVC: 9

20 Sep 1984

3040-01-190-8184
Rigid Connecting Link

011908184
300361-107: RNCC: 3 | RNVC: 2
300361-105: RNCC: 5 | RNVC: 9

2 Oct 1984

3040-01-191-4179
Straight Shaft

011914179
1231-190-1: RNCC: 3 | RNVC: 2
1231-190-1: RNCC: C | RNVC: 1

7 Oct 1984

3040-01-191-8932
Rigid Connecting Link

011918932
7566-6204: RNCC: 3 | RNVC: 2
SR11578A-6204: RNCC: 3 | RNVC: 2
LE162-0056-6204: RNCC: 5 | RNVC: 2
LE162-0056: RNCC: 7 | RNVC: 1

13 Oct 1984

3040-01-192-1968
Shouldered Shaft

011921968
2205628-1: RNCC: 3 | RNVC: 2
2204218-1: RNCC: 5 | RNVC: 9

18 Oct 1984

3040-01-192-3559
Shouldered Shaft

011923559
41-309-16: RNCC: 3 | RNVC: 2
1412530-16: RNCC: 5 | RNVC: 2
1412530: RNCC: D | RNVC: 9

19 Oct 1984

3040-01-192-3619
Linear Actuating Cylinder Assembly Parts Kit

011923619
RK2AHL0105: RNCC: 3 | RNVC: 2

19 Oct 1984

3040-01-192-5690
Remote Control Lever

011925690
1-421-900-052: RNCC: 3 | RNVC: 2

23 Oct 1984

3040-01-192-9798
Shaft Retaining Plate

011929798
35328475: RNCC: 3 | RNVC: 2

28 Oct 1984

3040-01-193-0489
Body Hub

011930489
212663: RNCC: 3 | RNVC: 9
212663: RNCC: 5 | RNVC: 2

29 Oct 1984

3040-01-195-7067
Linear Actuating Cylinder

011957067
26308: RNCC: 3 | RNVC: 2

1 Dec 1984

3040-01-196-3934
Governor Linkage Hook

011963934
17604: RNCC: 3 | RNVC: 2
R48516: RNCC: 5 | RNVC: 9
R48516: RNCC: 5 | RNVC: 9
17604: RNCC: 5 | RNVC: 9

11 Dec 1984

3040-01-196-1505
Pawl

011961505
11571300-11: RNCC: 3 | RNVC: 9
11441400 ITEM 2: RNCC: 5 | RNVC: 2
11571300-11: RNCC: 5 | RNVC: 2
11441400 ITEM 2: RNCC: 5 | RNVC: 9
11441400 ITEM 2: RNCC: 5 | RNVC: 9
11571300-11: RNCC: 5 | RNVC: 9
11441400: RNCC: D | RNVC: 9

7 Dec 1984

3040-01-196-1432
Linear Actuating Cylinder

011961432
N16447: RNCC: 3 | RNVC: 2
20232N PIECE 22: RNCC: 3 | RNVC: 2
16447: RNCC: 5 | RNVC: 9
20232N: RNCC: D | RNVC: 9

7 Dec 1984

3040-01-196-4922
Rigid Connecting Link

011964922
12329218-2: RNCC: 3 | RNVC: 2
10085875: RNCC: 6 | RNVC: 9

12 Dec 1984

3040-01-196-9983
Counterbalance Weight

011969983
952B928-3: RNCC: 3 | RNVC: 2
952B928-3: RNCC: 5 | RNVC: 9

17 Dec 1984

3040-01-197-7214
Helical Gearshaft

011977214
60-415-0106-1: RNCC: 3 | RNVC: 2

26 Dec 1984

3040-01-197-5512
Shaft Collar

011975512
12336125: RNCC: 3 | RNVC: 2

22 Dec 1984

3040-01-197-8659
Manual Control Lever

011978659
7096-001: RNCC: 3 | RNVC: 2
B-71291 INDEX 13: RNCC: 5 | RNVC: 2
B-71291: RNCC: D | RNVC: 9

29 Dec 1984

3040-01-198-4359
Counterbalance Weight

011984359
1285M92P01: RNCC: 3 | RNVC: 2

9 Jan 1985

3040-01-198-4364
Counterbalance Weight

011984364
1285M93P02: RNCC: 3 | RNVC: 2

9 Jan 1985

3040-01-199-1697
Brake Shaft

011991697
PDB-0719: RNCC: 3 | RNVC: 9

17 Jan 1985

3040-01-199-8085
Manual Control Lever

011998085
040-07556-000: RNCC: 3 | RNVC: 2
40-7556: RNCC: 5 | RNVC: 9
5342PL0794041: RNCC: 6 | RNVC: 9

25 Jan 1985

3040-01-200-0938
Linear Actuating Cylinder Head

012000938
6-372-002204: RNCC: 3 | RNVC: 2
4053745: RNCC: 5 | RNVC: 2
4053745: RNCC: 5 | RNVC: 9

30 Jan 1985

3040-01-200-0935
Linear Actuating Cylinder Piston

012000935
6-701-000178: RNCC: 3 | RNVC: 2
2CD643: RNCC: 5 | RNVC: 2
2CD643: RNCC: 5 | RNVC: 9

30 Jan 1985

3040-01-200-2423
Linear Actuating Cylinder Cap

012002423
6-372-002432: RNCC: 3 | RNVC: 2
2CD628: RNCC: C | RNVC: 1

31 Jan 1985

3040-01-201-1076
Remote Control Lever

012011076
12335453: RNCC: 3 | RNVC: 2
12335453: RNCC: 5 | RNVC: 2

12 Feb 1985

3040-01-201-4817
Rigid Connecting Link

012014817
12336826: RNCC: 3 | RNVC: 2

19 Feb 1985

3040-01-201-9991
Rigid Connecting Link

012019991
4450-048: RNCC: 3 | RNVC: 2

27 Feb 1985

3040-01-202-3385
Brake Shoe Parts Kit

012023385
PK664: RNCC: 3 | RNVC: 2
PK664: RNCC: 5 | RNVC: 9
PK664: RNCC: C | RNVC: 1
601239: RNCC: C | RNVC: 1

1 Mar 1985

3040-01-202-6491
Counterbalance Weight

012026491
8050049-002: RNCC: 3 | RNVC: 9
X8050049-002: RNCC: 5 | RNVC: 9

5 Mar 1985

3040-01-203-4242
Manual Control Lever

012034242
314 3252: RNCC: 3 | RNVC: 2

14 Mar 1985

3040-01-203-4244
Linear Actuating Cylinder Cap

012034244
309 2763: RNCC: 3 | RNVC: 2
348 6974: RNCC: D | RNVC: 9

14 Mar 1985

3040-01-204-2428
Counterbalance Weight

012042428
4502-082: RNCC: 3 | RNVC: 2

23 Mar 1985

3040-01-204-4279
Shaft Assembly

012044279
123C13232-1: RNCC: 3 | RNVC: 2
123FTC131-3: RNCC: 5 | RNVC: 9
123C13232-1: RNCC: 5 | RNVC: 9
123C13232-1: RNCC: 5 | RNVC: 9

26 Mar 1985

3040-01-203-5757
Rigid Connecting Link

012035757
L6311117-007: RNCC: 3 | RNVC: 2

15 Mar 1985

3040-01-204-9798
Rigid Connecting Link

012049798
4454-074: RNCC: 3 | RNVC: 2

2 Apr 1985

3040-01-205-7534
Shouldered Shaft

012057534
RG54668-2: RNCC: 3 | RNVC: 2

11 Apr 1985

3040-01-209-6727
Push-Pull Control Assembly

012096727
L6410347-007: RNCC: 3 | RNVC: 2
L6410347-005: RNCC: 5 | RNVC: 2

4 Jun 1985

3040-01-211-0924
Pneumatic Actuator Cylinder Housing

012110924
BMD-185-5: RNCC: 3 | RNVC: 9

21 Jun 1985

3040-01-212-8589
Spur Gearshaft

012128589
42249E24: RNCC: 3 | RNVC: 2

19 Jul 1985

3040-01-213-8111
Rigid Connecting Link

012138111
4060110: RNCC: 3 | RNVC: 2
4060110A: RNCC: 5 | RNVC: 2

31 Jul 1985

3040-01-214-1603
Control Cam

012141603
4-198-2-00049: RNCC: 3 | RNVC: 2
2CT133: RNCC: 5 | RNVC: 2
2CT133: RNCC: 5 | RNVC: 9

6 Aug 1985

3040-01-214-1605
Control Cam

012141605
23018024: RNCC: 3 | RNVC: 2
23018024: RNCC: 8 | RNVC: 2

6 Aug 1985

3040-01-214-4507
Rigid Connecting Link

012144507
6-768-001713: RNCC: 3 | RNVC: 2
2CT200: RNCC: 5 | RNVC: 2
2CT200: RNCC: 5 | RNVC: 9

10 Aug 1985

3040-01-216-1098
Axle Brake

012161098
T001412526: RNCC: 3 | RNVC: 2
T001412526: RNCC: 3 | RNVC: 9
T001412526: RNCC: 5 | RNVC: 2
1-412526: RNCC: 5 | RNVC: 2
412526: RNCC: 5 | RNVC: 9
1-412526: RNCC: 5 | RNVC: 9

6 Sep 1985

3040-01-216-4320
Rigid Connecting Link

012164320
4900-151: RNCC: 3 | RNVC: 2
75J618002-151: RNCC: 3 | RNVC: 9
75J618002-151: RNCC: 5 | RNVC: 2
B889100-151: RNCC: 5 | RNVC: 9
75B618002-151: RNCC: 7 | RNVC: 2
4900: RNCC: D | RNVC: 9

11 Sep 1985

3040-01-217-1122
Shouldered Shaft

012171122
23017955: RNCC: 3 | RNVC: 2
23017955: RNCC: 8 | RNVC: 2

21 Sep 1985

3040-01-218-8257
Rotating Shaft Eye Bracket

012188257
2721674: RNCC: 3 | RNVC: 2
8485-38: RNCC: 5 | RNVC: 2
8223-46: RNCC: 5 | RNVC: 9

19 Oct 1985

3040-01-218-4397
Rigid Connecting Link

012184397
123CSM40008-601: RNCC: 3 | RNVC: 2
123SCM40008-601: RNCC: 3 | RNVC: 9
123CSM40008-601: RNCC: 5 | RNVC: 9
123CSM40008-1: RNCC: E | RNVC: 8

11 Oct 1985

3040-01-219-3448
Bell Crank

012193448
4E33206-103B: RNCC: 3 | RNVC: 2

25 Oct 1985

3040-01-219-5639
Straight Shaft

012195639
62931: RNCC: 3 | RNVC: 2
62931: RNCC: 5 | RNVC: 1

29 Oct 1985

3040-01-221-5607
Shouldered Shaft

012215607
1502940: RNCC: 3 | RNVC: 2
1502940: RNCC: 5 | RNVC: 9

29 Nov 1985

3040-01-221-9323
Counterbalance Weight

012219323
8019131-034: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-222-0265
Shouldered Shaft

012220265
23045917: RNCC: 3 | RNVC: 2

6 Dec 1985

3040-01-222-3082
Counterbalance Weight

012223082
8019131-019: RNCC: 3 | RNVC: 9

10 Dec 1985

3040-01-222-3818
Control Cam

012223818
2664339: RNCC: 3 | RNVC: 2

11 Dec 1985

3040-01-222-4717
Shaft Retaining Plate

012224717
324317: RNCC: 3 | RNVC: 2
9126280930: RNCC: 5 | RNVC: 2
324317: RNCC: 5 | RNVC: 9
9126280930: RNCC: 5 | RNVC: 9

12 Dec 1985

3040-01-222-7825
Shouldered Shaft

012227825
40001-1106-01: RNCC: 3 | RNVC: 2

17 Dec 1985

3040-01-222-9454
Spur Gearshaft

012229454
2670861: RNCC: 3 | RNVC: 2

20 Dec 1985

3040-01-222-9719
Nonrotating Shaft Eye Bracket

012229719
1449020: RNCC: 3 | RNVC: 2
1449020: RNCC: 5 | RNVC: 9

20 Dec 1985

3040-01-222-9428
Rigid Connecting Link

012229428
4066657: RNCC: 3 | RNVC: 2
4066657: RNCC: 5 | RNVC: 2
4066657: RNCC: 5 | RNVC: 2
4066657: RNCC: 5 | RNVC: 2
4066657: RNCC: 5 | RNVC: 2
4066657: RNCC: 5 | RNVC: 9

20 Dec 1985

3040-01-222-1833
Counterbalance Weight

012221833
8019131-006: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-224-6468
Control Cam

012246468
2673207: RNCC: 3 | RNVC: 2

19 Jan 1986

3040-01-224-8859
Control Cam

012248859
2673954: RNCC: 3 | RNVC: 2

24 Jan 1986

3040-01-226-2667
Shouldered Shaft

012262667
1244582-1: RNCC: 3 | RNVC: 9
1244582-1: RNCC: 5 | RNVC: 9

14 Feb 1986

3040-01-226-6496
Straight Shaft

012266496
10072-020: RNCC: 3 | RNVC: 2
10072-020: RNCC: 5 | RNVC: 9
10072-010: RNCC: 5 | RNVC: 9
10072: RNCC: 5 | RNVC: 9

20 Feb 1986

3040-01-226-7316
Rigid Connecting Link

012267316
5750034-009: RNCC: 3 | RNVC: 2
5750057-003: RNCC: C | RNVC: 1

21 Feb 1986

3040-01-227-8545
Shouldered Shaft

012278545
60244-40812: RNCC: 3 | RNVC: 2

11 Mar 1986

3040-01-227-8991
Shouldered Shaft

012278991
7364434: RNCC: 3 | RNVC: 2

12 Mar 1986

3040-01-228-7756
Shouldered Shaft

012287756
803-4384681-A-78: RNCC: 3 | RNVC: 2
803-4384681: RNCC: D | RNVC: 9

21 Mar 1986

3040-01-229-4388
Nonrotating Shaft Eye Bracket

012294388
1395AS278: RNCC: 3 | RNVC: 2

2 Apr 1986

3040-01-229-9045
Rigid Connecting Link

012299045
68A351129-1005: RNCC: 3 | RNVC: 2
68A351129-1005: RNCC: 5 | RNVC: 2
68A351129-1005: RNCC: 5 | RNVC: 9
68A351129: RNCC: D | RNVC: 9

6 Apr 1986

3040-01-230-5637
Linear Actuating Cylinder Piston

012305637
400553B: RNCC: 3 | RNVC: 2
2CX405: RNCC: 5 | RNVC: 2
2CX405: RNCC: 5 | RNVC: 9
19022-306: RNCC: 5 | RNVC: 9

16 Apr 1986

3040-01-231-0975
Shouldered Shaft

012310975
86417: RNCC: 3 | RNVC: 2
86417: RNCC: 5 | RNVC: 2
86417: RNCC: 5 | RNVC: 9
86417: RNCC: 5 | RNVC: 9

23 Apr 1986

3040-01-234-1824
Spur Gearshaft

012341824
2CK144: RNCC: 3 | RNVC: 2
WLM290082: RNCC: 5 | RNVC: 2
9-734-100654: RNCC: 5 | RNVC: 9
2CK144: RNCC: 5 | RNVC: 9
WLM290082: RNCC: 5 | RNVC: 9
290082: RNCC: 5 | RNVC: 9
9-734-100654: RNCC: 5 | RNVC: 9

9 Jun 1986

3040-01-234-4982
Ball Joint

012344982
2CR557: RNCC: 3 | RNVC: 2
L-28-SV-5212-B-10: RNCC: 5 | RNVC: 2
2CR557: RNCC: 5 | RNVC: 9
L28SV5212B11: RNCC: C | RNVC: 1
2CB444: RNCC: C | RNVC: 1

14 Jun 1986

3040-01-234-8467
Shaft Collar

012348467
8925751: RNCC: 3 | RNVC: 2
2GH636: RNCC: 5 | RNVC: 2
019-90006-17: RNCC: 5 | RNVC: 2
441904-0002: RNCC: 5 | RNVC: 9
2GH636: RNCC: 5 | RNVC: 9
441904-2: RNCC: 5 | RNVC: 9
441904: RNCC: 5 | RNVC: 9

21 Jun 1986

3040-01-236-1252
Rigid Connecting Link

012361252
T44561: RNCC: 3 | RNVC: 2
T44561: RNCC: 5 | RNVC: 9

12 Jul 1986

3040-01-236-2469
Shouldered Shaft

012362469
1532301-3: RNCC: 3 | RNVC: 2
1532301-3: RNCC: 5 | RNVC: 9

15 Jul 1986

3040-01-233-9854
Shouldered Shaft

012339854
AD32772-3: RNCC: 3 | RNVC: 2
AD32772-3: RNCC: 5 | RNVC: 2

5 Jun 1986

3040-01-237-2885
Pawl

012372885
945532-105: RNCC: 3 | RNVC: 2
945532-105: RNCC: 5 | RNVC: 2
945532: RNCC: D | RNVC: 9

29 Jul 1986

3040-01-237-6369
Brake Disc

012376369
4-253-897-000-0: RNCC: 3 | RNVC: 2
6-114-200-912-9 KEY 6: RNCC: 5 | RNVC: 9
4-253-047-000-0: RNCC: 5 | RNVC: 9
4-253-897-000-0: RNCC: C | RNVC: 1
6-114-200-912-9: RNCC: D | RNVC: 9

3 Aug 1986

3040-01-237-6977
Clutch Slave Cylinder

012376977
001 295 73 07: RNCC: 3 | RNVC: 2
263.207.00K014: RNCC: 5 | RNVC: 2

5 Aug 1986

3040-01-238-1852
Bell Crank

012381852
406 300 09 04: RNCC: 3 | RNVC: 2
406 300 09 04: RNCC: 5 | RNVC: 2
406 300 09 04: RNCC: 5 | RNVC: 9

12 Aug 1986

3040-01-237-6435
Rigid Connecting Link

012376435
406 881 01 27: RNCC: 3 | RNVC: 2
406 881 01 27: RNCC: 5 | RNVC: 2
406 881 01 27: RNCC: 5 | RNVC: 9

3 Aug 1986

3040-01-238-3352
Shouldered Shaft

012383352
883889-2: RNCC: 3 | RNVC: 2

13 Aug 1986

3040-01-238-8773
Shouldered Shaft

012388773
DS-842679: RNCC: 3 | RNVC: 2
842679: RNCC: 5 | RNVC: 9

21 Aug 1986

3040-01-238-3985
Linear Actuating Cylinder Assembly

012383985
1H2H0A00279263: RNCC: 3 | RNVC: 2
AG146145A0: RNCC: 5 | RNVC: 9

14 Aug 1986

3040-01-240-9673
Linear Actuating Cylinder Assembly Parts Kit

012409673
LK1607311M91: RNCC: 3 | RNVC: 2

20 Sep 1986

3040-01-242-2561
Rigid Connecting Link

012422561
7600-5301H: RNCC: 3 | RNVC: 2
LE162-0067-5301: RNCC: 3 | RNVC: 2
LE162-0067-5301: RNCC: 5 | RNVC: 2
LE 62-0067-5301: RNCC: 5 | RNVC: 9
5301-7600: RNCC: 5 | RNVC: 9
LE162-0067: RNCC: 7 | RNVC: 1

9 Oct 1986

3040-01-242-7949
Linear Actuating Cylinder Piston Rod

012427949
13211E3014: RNCC: 3 | RNVC: 2

17 Oct 1986

3040-01-241-4818
Shaft Retaining Plate

012414818
M12WHR50-L: RNCC: 3 | RNVC: 9
M10WH100-1: RNCC: 5 | RNVC: 9
M10WH100: RNCC: D | RNVC: 9

26 Sep 1986

3040-01-243-7888
Linear Actuating Cylinder Piston

012437888
25-66910-1: RNCC: 3 | RNVC: 2

31 Oct 1986

3040-01-243-6475
Rigid Connecting Link

012436475
SAM-F870-0004: RNCC: 3 | RNVC: 2
SHE-F870-0004: RNCC: 5 | RNVC: 2
SAM-F870-0004: RNCC: 5 | RNVC: 9
SHE-F870-0004: RNCC: 5 | RNVC: 9

30 Oct 1986

3040-01-243-7153
Transmission Collar Assembly

012437153
955481-101: RNCC: 3 | RNVC: 2
955481-101: RNCC: 5 | RNVC: 2
955481: RNCC: D | RNVC: 9

31 Oct 1986

3040-01-245-1530
Straight Shaft

012451530
701208: RNCC: 3 | RNVC: 2

24 Nov 1986

3040-01-245-6791
Linear Actuating Cylinder Assembly

012456791
627-01041-30M: RNCC: 3 | RNVC: 2
627-01041-30M: RNCC: 5 | RNVC: 2

3 Dec 1986

3040-01-246-7144
Worm Shaft

012467144
742848: RNCC: 3 | RNVC: 2

18 Dec 1986

3040-01-246-7847
Spur Gearshaft

012467847
1395AS215: RNCC: 3 | RNVC: 2
1395AS215: RNCC: 5 | RNVC: 2

18 Dec 1986

3040-01-247-1519
Shouldered Shaft

012471519
162B8114-2: RNCC: 3 | RNVC: 2

26 Dec 1986

3040-01-248-3723
Brake Backing Plate

012483723
8-005-703-01: RNCC: 3 | RNVC: 2
N1-087-602-A ITEM 5: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-248-3894
Shouldered Shaft

012483894
609141-1-RA: RNCC: 3 | RNVC: 2
609141-1-RA: RNCC: 5 | RNVC: 9

23 Jan 1987

3040-01-248-5220
Bevel Gearshaft

012485220
2041771-1: RNCC: 3 | RNVC: 2
2041771-1: RNCC: 5 | RNVC: 9
10106983: RNCC: 6 | RNVC: 9

24 Jan 1987

3040-01-249-1435
Shaft Retaining Plate

012491435
5593692: RNCC: 3 | RNVC: 2
12338456: RNCC: 3 | RNVC: 2
5583613: RNCC: C | RNVC: 1
5593692-C: RNCC: D | RNVC: 9

6 Feb 1987

3040-01-249-6698
Knurled Roller

012496698
12102003-101: RNCC: 3 | RNVC: 9
12102003-101: RNCC: 5 | RNVC: 2
12102003-101: RNCC: 5 | RNVC: 9

14 Feb 1987

Load More Results