What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 132 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 132of 575

3040-01-296-0520
Stop Ring Half

012960520
314-8866: RNCC: 3 | RNVC: 2
10524191: RNCC: 5 | RNVC: 2
314-8866: RNCC: 5 | RNVC: 9

16 Mar 1989

3040-01-296-5916
Linear Actuating Cylinder

012965916
020021: RNCC: 3 | RNVC: 2

22 Mar 1989

3040-01-296-0876
Rigid Connecting Link

012960876
4900-191: RNCC: 3 | RNVC: 2
75J618002-191: RNCC: 5 | RNVC: 2
B889100-191: RNCC: 5 | RNVC: 2
75B618002-191: RNCC: 7 | RNVC: 2

16 Mar 1989

3040-01-296-9489
Counterbalance Weight

012969489
1286M56G01: RNCC: 3 | RNVC: 2

25 Mar 1989

3040-01-297-3816
Manual Control Lever

012973816
12902987: RNCC: 3 | RNVC: 2

1 Apr 1989

3040-01-297-7309
Remote Control Lever

012977309
10862095: RNCC: 3 | RNVC: 2

6 Apr 1989

3040-01-298-6646
Shouldered Shaft

012986646
10029201: RNCC: 3 | RNVC: 2

19 Apr 1989

3040-01-298-6645
Shouldered Shaft

012986645
10029062: RNCC: 3 | RNVC: 2

19 Apr 1989

3040-01-298-9462
Straight Shaft

012989462
3231-3001-0: RNCC: 3 | RNVC: 2
01032310: RNCC: 5 | RNVC: 9
01032310: RNCC: 5 | RNVC: 9
01032310: RNCC: 5 | RNVC: 9

23 Apr 1989

3040-01-299-3505
Shaft Collar

012993505
10029135: RNCC: 3 | RNVC: 2

30 Apr 1989

3040-01-299-5824
Hub Clamp

012995824
CSC75-16: RNCC: 3 | RNVC: 2
10512486: RNCC: 7 | RNVC: 2

4 May 1989

3040-01-301-4315
Housing Positioner

013014315
8644897: RNCC: 3 | RNVC: 2
8644897: RNCC: 5 | RNVC: 9

27 May 1989

3040-01-301-8018
Shouldered Shaft

013018018
41406-1: RNCC: 3 | RNVC: 2
41406-1: RNCC: 3 | RNVC: 9

3 Jun 1989

3040-01-302-6790
Rigid Connecting Link

013026790
12524485: RNCC: 3 | RNVC: 2

17 Jun 1989

3040-01-303-2567
Rigid Connecting Link

013032567
68830: RNCC: 3 | RNVC: 2
68830: RNCC: 5 | RNVC: 9
LE509/46A: RNCC: 5 | RNVC: 9
68830: RNCC: 5 | RNVC: 9
LE509/46A: RNCC: 5 | RNVC: 9

27 Jun 1989

3040-01-305-3364
Rigid Connecting Link

013053364
12299025-10: RNCC: 3 | RNVC: 2
10386403: RNCC: 6 | RNVC: 9
12299025: RNCC: D | RNVC: 9

3 Aug 1989

3040-01-305-7903
Shouldered Shaft

013057903
35-61: RNCC: 3 | RNVC: 2
DV54698-W4C ITEM 10: RNCC: 5 | RNVC: 2

11 Aug 1989

3040-01-307-0174
Multiple Disk Brake

013070174
73034: RNCC: 3 | RNVC: 9
73019: RNCC: 5 | RNVC: 9
MA207-21724: RNCC: 5 | RNVC: 9
73019: RNCC: 5 | RNVC: 9
73034: RNCC: 5 | RNVC: 9

4 Sep 1989

3040-01-309-4951
Shouldered Shaft

013094951
65396-06006-042: RNCC: 3 | RNVC: 2
65396-06006-042: RNCC: 5 | RNVC: 2

19 Oct 1989

3040-01-310-0046
Shouldered Shaft

013100046
152448: RNCC: 3 | RNVC: 2

27 Oct 1989

3040-01-310-4287
Shouldered Shaft

013104287
056010G030-2206: RNCC: 3 | RNVC: 2
056010G0302358: RNCC: 5 | RNVC: 9
5601003103: RNCC: D | RNVC: 9

4 Nov 1989

3040-01-310-4837
Remote Control Lever

013104837
10866853: RNCC: 3 | RNVC: 2

4 Nov 1989

3040-01-310-9889
Worm Shaft

013109889
903-5912047PC6: RNCC: 3 | RNVC: 9

16 Nov 1989

3040-01-311-1693
Manual Control Lever

013111693
01214500: RNCC: 3 | RNVC: 2
361959: RNCC: 5 | RNVC: 2
361959: RNCC: 5 | RNVC: 9

21 Nov 1989

3040-01-311-2567
Shouldered Shaft

013112567
A1022A152: RNCC: 3 | RNVC: 2

22 Nov 1989

3040-01-311-5589
Straight Shaft

013115589
738717: RNCC: 3 | RNVC: 2

1 Dec 1989

3040-01-312-1356
Linear Actuating Cylinder Piston Rod

013121356
11043080: RNCC: 3 | RNVC: 2
11043080: RNCC: 3 | RNVC: 9
11043080: RNCC: 5 | RNVC: 9
11043080: RNCC: 5 | RNVC: 9
1103308: RNCC: 5 | RNVC: 9
11025004: RNCC: 5 | RNVC: 9

12 Dec 1989

3040-01-312-9186
Rigid Connecting Link

013129186
198824-A: RNCC: 3 | RNVC: 2

26 Dec 1989

3040-01-312-1355
Linear Actuating Cylinder Piston Rod

013121355
11043296: RNCC: 3 | RNVC: 2
11043296: RNCC: 3 | RNVC: 9
11043296: RNCC: 5 | RNVC: 9
11043296: RNCC: 5 | RNVC: 9
11024999: RNCC: 5 | RNVC: 9

12 Dec 1989

3040-01-313-5436
Straight Shaft

013135436
15744: RNCC: 3 | RNVC: 2

11 Jan 1990

3040-01-313-7563
Mechanical Drive Housing

013137563
877988: RNCC: 3 | RNVC: 2
10163074: RNCC: 6 | RNVC: 9

16 Jan 1990

3040-01-312-9674
Brake Disc

013129674
36346: RNCC: 3 | RNVC: 2
36346: RNCC: 5 | RNVC: 9

27 Dec 1989

3040-01-314-5774
Shouldered Shaft

013145774
65850-05237-112: RNCC: 3 | RNVC: 2

1 Feb 1990

3040-01-252-4291
Body Hub

012524291
8215754: RNCC: 3 | RNVC: 2

2 Apr 1987

3040-01-253-7035
Speedometer-Tachometer Drive Adapter

012537035
SP-238 1.000: RNCC: 3 | RNVC: 2
1W2316: RNCC: 5 | RNVC: 2
SP238: RNCC: 5 | RNVC: 9
T2706101: RNCC: 6 | RNVC: 9

23 Apr 1987

3040-01-253-0561
Linear Actuating Cylinder Assembly

012530561
52-B-10350-1: RNCC: 3 | RNVC: 2
52-B-10350: RNCC: D | RNVC: 9

11 Apr 1987

3040-01-255-4227
Straight Shaft

012554227
656C0499J032A: RNCC: 3 | RNVC: 2
656C0499 J028A: RNCC: 5 | RNVC: 9
999F0722 PC 29: RNCC: C | RNVC: 1

20 May 1987

3040-01-255-6197
Shaft Collar

012556197
196B8200-2: RNCC: 3 | RNVC: 2
196B8200: RNCC: D | RNVC: 9

22 May 1987

3040-01-256-3617
Straight Shaft

012563617
9333000240146: RNCC: 3 | RNVC: 2
9333-00-0240: RNCC: 5 | RNVC: 9
9333-00-0000: RNCC: 5 | RNVC: 9
9333-00-0000: RNCC: D | RNVC: 9

4 Jun 1987

3040-01-255-8993
Shouldered Shaft

012558993
44711: RNCC: 3 | RNVC: 2
60-327-0012-1: RNCC: 5 | RNVC: 9
60-327-0012-1: RNCC: 5 | RNVC: 9
60-327-0012-1: RNCC: 5 | RNVC: 9

30 May 1987

3040-01-256-3709
Flexible Shaft Assembly Core

012563709
57353-60: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-3715
Flexible Shaft Assembly Core

012563715
57353-300: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-256-3713
Flexible Shaft Assembly Core

012563713
57353-00 QTY 200 FT: RNCC: 3 | RNVC: 2
57353-200: RNCC: 5 | RNVC: 9

4 Jun 1987

3040-01-256-8993
Shouldered Shaft

012568993
523-5928040 PC5: RNCC: 3 | RNVC: 2
624D-2055-37 PC 5: RNCC: 5 | RNVC: 9

9 Jun 1987

3040-01-257-8544
Brake Backing Plate

012578544
8-076-207-00: RNCC: 3 | RNVC: 2
8-076-207: RNCC: 5 | RNVC: 9

25 Jun 1987

3040-01-257-8554
Linear Actuating Cylinder Assembly

012578554
H1489A: RNCC: 3 | RNVC: 2
PH-1489-A: RNCC: 5 | RNVC: 9

25 Jun 1987

3040-01-257-3919
Body Hub

012573919
007314-501: RNCC: 3 | RNVC: 2
007314-501: RNCC: 3 | RNVC: 9

18 Jun 1987

3040-01-258-2003
Worm Shaft

012582003
9360310: RNCC: 3 | RNVC: 2

30 Jun 1987

3040-01-264-5603
Piston Rod Ring

012645603
C660778: RNCC: 3 | RNVC: 2
215345: RNCC: 5 | RNVC: 2
636900: RNCC: 5 | RNVC: 9
215306: RNCC: D | RNVC: 9

2 Oct 1987

3040-01-264-9363
Linear Actuating Cylinder Piston

012649363
4675669-0005A: RNCC: 3 | RNVC: 2
DM50995 ITEM 4: RNCC: 5 | RNVC: 9
DM50995 ITEM 4: RNCC: 5 | RNVC: 9

8 Oct 1987

3040-01-265-2609
Shouldered Shaft

012652609
150-0442: RNCC: 3 | RNVC: 2
1355326: RNCC: 5 | RNVC: 2
150-0442: RNCC: 5 | RNVC: 2
345414: RNCC: 5 | RNVC: 9
150-0442: RNCC: C | RNVC: 1

11 Oct 1987

3040-01-265-3708
Brake Disc

012653708
14289: RNCC: 3 | RNVC: 9
C-21782-REV.1-PC44: RNCC: 5 | RNVC: 9

13 Oct 1987

3040-01-265-4786
Shouldered Shaft

012654786
75A50900-003: RNCC: 3 | RNVC: 2

14 Oct 1987

3040-01-265-8605
Remote Control Lever

012658605
A83387-1: RNCC: 3 | RNVC: 2
A83387-1: RNCC: 5 | RNVC: 9

17 Oct 1987

3040-01-266-7208
Cylinder Repair Kit

012667208
787AS286-19: RNCC: 3 | RNVC: 2
999-073270051: RNCC: 5 | RNVC: 2
A55P9036-11: RNCC: C | RNVC: 1

30 Oct 1987

3040-01-267-0625
Rigid Connecting Link

012670625
6J5359: RNCC: 3 | RNVC: 2

4 Nov 1987

3040-01-267-8768
Pawl

012678768
9922.0029: RNCC: 3 | RNVC: 2
5HB84: RNCC: 5 | RNVC: 2
ISO-80-26A: RNCC: 5 | RNVC: 9
5HB84: RNCC: 5 | RNVC: 9

19 Nov 1987

3040-01-268-3991
Shaft Retaining Plate

012683991
4001117: RNCC: 3 | RNVC: 2
206896: RNCC: 5 | RNVC: 2

29 Nov 1987

3040-01-261-0149
Control Cam

012610149
4849911 PIECE 6: RNCC: 3 | RNVC: 2
4849921: RNCC: C | RNVC: 1
4849911: RNCC: D | RNVC: 9

7 Aug 1987

3040-01-261-2548
Disk Brake Shoe

012612548
528682: RNCC: 3 | RNVC: 2
529682: RNCC: C | RNVC: 1

11 Aug 1987

3040-01-262-2578
Breather

012622578
336550: RNCC: 3 | RNVC: 2
336550: RNCC: 5 | RNVC: 2

26 Aug 1987

3040-01-262-7612
Pressure Regulator Shaft And Spring Assembly

012627612
0752-1010-B: RNCC: 3 | RNVC: 2
S001-0001-4 ITEM 4: RNCC: 5 | RNVC: 2
S001-0001-4: RNCC: D | RNVC: 9

3 Sep 1987

3040-01-262-7651
Control Cam

012627651
3032-011: RNCC: 3 | RNVC: 2
9987-824 ITEM 187: RNCC: 5 | RNVC: 2
9987-824: RNCC: D | RNVC: 9

3 Sep 1987

3040-01-262-7700
Rotating Shaft Eye Bracket

012627700
U10895: RNCC: 3 | RNVC: 2
U10895: RNCC: 5 | RNVC: 9

3 Sep 1987

3040-01-262-7703
Pawl

012627703
202WN PC 18: RNCC: 3 | RNVC: 9

3 Sep 1987

3040-01-263-2532
Mechanical Drive Housing

012632532
413-10642-1: RNCC: 3 | RNVC: 2

11 Sep 1987

3040-01-263-1429
Manual Control Lever

012631429
75A353359-2001: RNCC: 3 | RNVC: 2
75A353359-2001: RNCC: 5 | RNVC: 2
75A353359: RNCC: 5 | RNVC: 9

9 Sep 1987

3040-01-263-2530
Bell Crank

012632530
413-10688-501: RNCC: 3 | RNVC: 2

11 Sep 1987

3040-01-264-0589
Linear Actuating Cylinder Piston

012640589
D-WK-492-A43 PC 4-4: RNCC: 3 | RNVC: 2
D-WK-492-A43 PC 4-4: RNCC: 3 | RNVC: 9

24 Sep 1987

3040-01-271-5574
Bell Crank

012715574
68A411074-2008: RNCC: 3 | RNVC: 2

27 Jan 1988

3040-01-271-8058
Shaft Collar

012718058
9376096-1: RNCC: 1 | RNVC: 2
DC-12: RNCC: 3 | RNVC: 9
C1-2: RNCC: 5 | RNVC: 2

30 Jan 1988

3040-01-271-9049
Flexible Shaft Assembly Core

012719049
B-419-9132-201: RNCC: 3 | RNVC: 2
9132-201: RNCC: 5 | RNVC: 2

2 Feb 1988

3040-01-273-6075
Bell Crank

012736075
9376061: RNCC: 3 | RNVC: 2

27 Feb 1988

3040-01-273-5826
Brake Disc

012735826
2B1-2379: RNCC: 3 | RNVC: 2
2D3-989 PC 32: RNCC: C | RNVC: 1
2D3-989 ITEM 32: RNCC: C | RNVC: 1

26 Feb 1988

3040-01-272-8001
Flexible Shaft Assembly Core

012728001
75A603508-2007: RNCC: 3 | RNVC: 2
2600888-072-12: RNCC: 5 | RNVC: 2
DS23/2-72.120: RNCC: 5 | RNVC: 2
75A603508-2003: RNCC: E | RNVC: 8
DS23/2-72.200: RNCC: E | RNVC: 8

13 Feb 1988

3040-01-274-7057
Shouldered Shaft

012747057
75D131017-2001: RNCC: 3 | RNVC: 2

11 Mar 1988

3040-01-274-9287
Shouldered Shaft

012749287
034-27285: RNCC: 3 | RNVC: 2
S14-24720: RNCC: 5 | RNVC: 2
034-27285Y: RNCC: C | RNVC: 1

16 Mar 1988

3040-01-276-3590
Body Hub

012763590
SH 1 1/2: RNCC: 3 | RNVC: 2
05-4120: RNCC: 3 | RNVC: 9
SH 112: RNCC: 5 | RNVC: 9
SH-1.50: RNCC: 5 | RNVC: 9
05-4100/4141: RNCC: D | RNVC: 9

8 Apr 1988

3040-01-276-5016
Control Cam

012765016
396154: RNCC: 3 | RNVC: 2
396154: RNCC: 3 | RNVC: 9
396154: RNCC: 5 | RNVC: 9
396154: RNCC: 5 | RNVC: 9
396154: RNCC: 5 | RNVC: 9
396154: RNCC: C | RNVC: 1

9 Apr 1988

3040-01-277-5464
Shouldered Shaft

012775464
A02C2603-5: RNCC: 3 | RNVC: 2
A02C2603-5: RNCC: 5 | RNVC: 9
A02C2603-1: RNCC: 5 | RNVC: 9
A02C2603-5: RNCC: 5 | RNVC: 9
A02C2603: RNCC: D | RNVC: 9

22 Apr 1988

3040-01-277-5600
Ball Joint

012775600
6058K28: RNCC: 3 | RNVC: 2

22 Apr 1988

3040-01-277-6548
Linear Actuating Cylinder Assembly

012776548
1H000068981: RNCC: 3 | RNVC: 2
4.00C-VHLTS24ACX53.500: RNCC: 5 | RNVC: 9
GG113131A0: RNCC: 5 | RNVC: 9

25 Apr 1988

3040-01-278-2200
Control Cam

012782200
X308051: RNCC: 3 | RNVC: 9
4009G87-017: RNCC: 5 | RNVC: 9
958E350 ITEM 77: RNCC: 5 | RNVC: 9
X308051: RNCC: C | RNVC: 1
X308051: RNCC: C | RNVC: 1

3 May 1988

3040-01-278-5555
Linear Actuating Cylinder Piston

012785555
8101: RNCC: 3 | RNVC: 2
8100 1: RNCC: 5 | RNVC: 2

6 May 1988

3040-01-280-8224
Straight Shaft

012808224
5-39MIL3-0803-15: RNCC: 3 | RNVC: 2

13 Jun 1988

3040-01-281-1116
Bell Crank

012811116
1481990 W: RNCC: 3 | RNVC: 2
1481990 W: RNCC: 5 | RNVC: 9

17 Jun 1988

3040-01-281-1115
Bell Crank

012811115
1481980 W: RNCC: 3 | RNVC: 2
1481980 W: RNCC: 5 | RNVC: 9

17 Jun 1988

3040-01-281-1404
Shaft Collar

012811404
245011E: RNCC: 3 | RNVC: 2
150S312JX1: RNCC: 3 | RNVC: 9
150S312JX1: RNCC: 5 | RNVC: 9
Y-150S312JX1: RNCC: 5 | RNVC: 9

17 Jun 1988

3040-01-281-5764
Remote Control Lever

012815764
8Y026B-1: RNCC: 3 | RNVC: 2
8R0098 ITEM 36: RNCC: 5 | RNVC: 9
8Y0268-1: RNCC: C | RNVC: 1

28 Jun 1988

3040-01-281-3627
Remote Control Lever

012813627
1500AS114-1: RNCC: 3 | RNVC: 2
1500AS114-1: RNCC: 5 | RNVC: 2
1500AS114: RNCC: D | RNVC: 9

22 Jun 1988

3040-01-281-5920
Shouldered Shaft

012815920
8Z0107-1: RNCC: 3 | RNVC: 2
8Z0107: RNCC: 5 | RNVC: 9
8R0035: RNCC: D | RNVC: 9

28 Jun 1988

3040-01-281-4589
Rigid Connecting Link

012814589
70410-02334-045: RNCC: 3 | RNVC: 2
70410-02334: RNCC: 5 | RNVC: 1

24 Jun 1988

3040-01-283-8401
Straight Shaft

012838401
SH202817: RNCC: 3 | RNVC: 2
SM202817: RNCC: C | RNVC: 1

13 Aug 1988

3040-01-283-6064
Remote Control Lever

012836064
60-505-0001-1: RNCC: 3 | RNVC: 2
A-747097: RNCC: 5 | RNVC: 9

9 Aug 1988

3040-01-285-0087
Pawl

012850087
116294-1: RNCC: 3 | RNVC: 2

3 Sep 1988

3040-01-285-0084
Remote Control Lever

012850084
68A830864-1002: RNCC: 3 | RNVC: 2

3 Sep 1988

3040-01-285-0083
Bell Crank

012850083
9643M92G03: RNCC: 3 | RNVC: 2

3 Sep 1988

3040-01-285-2914
Rigid Connecting Link

012852914
37881: RNCC: 3 | RNVC: 2
C037881: RNCC: 5 | RNVC: 9
C37881: RNCC: 5 | RNVC: 9
37881: RNCC: 5 | RNVC: 9

10 Sep 1988

3040-01-285-7458
Spur Gearshaft

012857458
11450135-1: RNCC: 3 | RNVC: 2

20 Sep 1988

3040-01-285-6290
Remote Control Lever

012856290
10947463-2: RNCC: 3 | RNVC: 2
10947463: RNCC: D | RNVC: 9

17 Sep 1988

3040-01-286-7916
Rigid Connecting Link

012867916
4900036: RNCC: 3 | RNVC: 2
4900036: RNCC: 3 | RNVC: 9
AW-10: RNCC: 5 | RNVC: 2

8 Oct 1988

3040-01-286-9386
Shouldered Shaft

012869386
1366AS825: RNCC: 3 | RNVC: 2

12 Oct 1988

3040-01-288-2798
Nonrotating Shaft Eye Bracket

012882798
12367362: RNCC: 3 | RNVC: 2

4 Nov 1988

3040-01-288-5843
Spur Gearshaft

012885843
2035104-0001: RNCC: 3 | RNVC: 2
2035104: RNCC: D | RNVC: 9

10 Nov 1988

3040-01-289-3360
Shaft Retaining Plate

012893360
58313-40552-1: RNCC: 3 | RNVC: 2

21 Nov 1988

3040-01-289-5419
Shouldered Shaft

012895419
9841023005: RNCC: 3 | RNVC: 2
984.10230.05: RNCC: 5 | RNVC: 9

25 Nov 1988

3040-01-290-5045
Linear Actuating Cylinder

012905045
941AS102: RNCC: 3 | RNVC: 2

12 Dec 1988

3040-01-290-9294
Push-Pull Control Assembly

012909294
038012-03-072.0: RNCC: 3 | RNVC: 2
304242-003-0072.0: RNCC: 3 | RNVC: 9
1617300: RNCC: 5 | RNVC: 2
001-04333-0072: RNCC: 5 | RNVC: 9
D038012-003-0072.0: RNCC: 5 | RNVC: 9
1617300: RNCC: 7 | RNVC: 9

19 Dec 1988

3040-01-291-2752
Shaft Retaining Plate

012912752
742797: RNCC: 3 | RNVC: 2

24 Dec 1988

3040-01-292-1590
Shouldered Shaft

012921590
SA-2676: RNCC: 3 | RNVC: 2
4791: RNCC: D | RNVC: 9

11 Jan 1989

3040-01-293-4430
Linear Actuating Cylinder Assembly Parts Kit

012934430
DH24-188: RNCC: 3 | RNVC: 2

3 Feb 1989

3040-01-293-5157
Linear Actuating Cylinder Assembly

012935157
3249R1: RNCC: 3 | RNVC: 2
3249RA PIECE 1: RNCC: 5 | RNVC: 9
3249RA: RNCC: D | RNVC: 9

3 Feb 1989

3040-01-293-5766
Counterbalance Weight

012935766
4075750CL3: RNCC: 3 | RNVC: 2

3 Feb 1989

3040-01-294-8766
Manual Control Lever

012948766
85002-196: RNCC: 3 | RNVC: 2

23 Feb 1989

3040-01-296-1119
Linear Actuating Cylinder Assembly

012961119
10525494: RNCC: 3 | RNVC: 2
2.50 NPUS 13 X 24.00: RNCC: 3 | RNVC: 9
2.50NPUS13X24.00: RNCC: 5 | RNVC: 2
10525494: RNCC: 5 | RNVC: 2

16 Mar 1989

3040-01-297-6895
Housing Adapter

012976895
8877766-01: RNCC: 3 | RNVC: 2
6099-4: RNCC: 5 | RNVC: 2
8877766-01: RNCC: 5 | RNVC: 9
8877766-01: RNCC: 5 | RNVC: 9

6 Apr 1989

3040-01-297-7311
Rigid Connecting Link

012977311
289435-1: RNCC: 3 | RNVC: 2

6 Apr 1989

3040-01-297-9102
Belt-Chain Tension Adjusting Device

012979102
3912772: RNCC: 3 | RNVC: 2
3912772: RNCC: 5 | RNVC: 2
J91277-2: RNCC: 5 | RNVC: 2
CBU1542: RNCC: 5 | RNVC: 2
4429722: RNCC: 5 | RNVC: 2
3040PL0816676: RNCC: 6 | RNVC: 9

8 Apr 1989

3040-01-298-4497
Shouldered Shaft

012984497
10029055: RNCC: 3 | RNVC: 2

16 Apr 1989

3040-01-299-9357
Friction Lining

012999357
5020-0007 ITEM 7: RNCC: 3 | RNVC: 2
5020-007 ITEM 7: RNCC: C | RNVC: 1

7 May 1989

3040-01-300-3158
Shaft Retaining Plate

013003158
28 40017-8: RNCC: 3 | RNVC: 2
28 40017-8: RNCC: 5 | RNVC: 9

12 May 1989

3040-01-301-8426
Rigid Connecting Link

013018426
93996-991: RNCC: 3 | RNVC: 2
603 070 17 21: RNCC: 3 | RNVC: 2
93996-991: RNCC: 3 | RNVC: 9
603 070 17 21: RNCC: 5 | RNVC: 9
4538741-250: RNCC: 5 | RNVC: 9

4 Jun 1989

3040-01-302-1166
Shouldered Shaft

013021166
4T33001-103B: RNCC: 3 | RNVC: 2
4T33001-103B: RNCC: 5 | RNVC: 2
4T33001-103B: RNCC: 5 | RNVC: 2
4T33001-103B: RNCC: 5 | RNVC: 2
4T33001-103B: RNCC: 5 | RNVC: 9
4T33001-103B: RNCC: 5 | RNVC: 9
4T33001-103A: RNCC: 5 | RNVC: 9
4T33001-101A: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-303-1341
Mechanical Drive Housing

013031341
12577081: RNCC: 3 | RNVC: 2
K-106: RNCC: 5 | RNVC: 2
K-106: RNCC: 5 | RNVC: 9
K-106: RNCC: 5 | RNVC: 9
12577081: RNCC: 5 | RNVC: 9

24 Jun 1989

3040-01-302-8461
Rigid Connecting Link

013028461
12524484: RNCC: 3 | RNVC: 2
12524065: RNCC: E | RNVC: 8

21 Jun 1989

3040-01-304-0898
Shouldered Shaft

013040898
12577067: RNCC: 3 | RNVC: 2
K-95: RNCC: 5 | RNVC: 2
K-95: RNCC: 5 | RNVC: 9
K-95: RNCC: 5 | RNVC: 9
12577067: RNCC: 5 | RNVC: 9

12 Jul 1989

3040-01-305-5439
Flexible Control Casing

013055439
2600233-101: RNCC: 3 | RNVC: 2
2600233-10: RNCC: 5 | RNVC: 9
2600233-101: RNCC: 5 | RNVC: 9

7 Aug 1989

3040-01-305-5588
Flexible Drive Shaft

013055588
5100999: RNCC: 3 | RNVC: 2

7 Aug 1989

3040-01-306-6336
Shaft Collar

013066336
1353AS121-1: RNCC: 3 | RNVC: 2
1353AS121: RNCC: D | RNVC: 9

27 Aug 1989

3040-01-307-2187
Straight Shaft

013072187
8267898: RNCC: 3 | RNVC: 2

8 Sep 1989

3040-01-306-7818
Flexible Drive Shaft

013067818
SS350R-8: RNCC: 3 | RNVC: 2
SS350R-8: RNCC: 3 | RNVC: 9
SS350R-8VM: RNCC: 5 | RNVC: 9

30 Aug 1989

3040-01-308-0725
Shouldered Shaft

013080725
6129491A-0020: RNCC: 3 | RNVC: 2
709-6129491 ITEM 20: RNCC: 3 | RNVC: 2
36-05-7820: RNCC: 5 | RNVC: 2
87832-1608A ITEM 20: RNCC: 5 | RNVC: 9
709-6129491: RNCC: D | RNVC: 9

22 Sep 1989

3040-01-308-4507
Rigid Connecting Link

013084507
4080732: RNCC: 3 | RNVC: 2
4080732: RNCC: 5 | RNVC: 2
4070115-01: RNCC: 5 | RNVC: 2
4080711-01: RNCC: 5 | RNVC: 2
4080732: RNCC: 5 | RNVC: 2
4070115-01: RNCC: 5 | RNVC: 2
4080711-01: RNCC: 5 | RNVC: 2
3040PL0668219: RNCC: 6 | RNVC: 9

29 Sep 1989

3040-01-308-7100
Rigid Connecting Link

013087100
145CS340-3: RNCC: 3 | RNVC: 2
89-1000-3: RNCC: 3 | RNVC: 9
145C2010-11: RNCC: E | RNVC: 8

3 Oct 1989

3040-01-309-4465
Linear Actuating Cylinder Cap

013094465
2527114-1: RNCC: 3 | RNVC: 2
2527114: RNCC: D | RNVC: 9

18 Oct 1989

3040-01-310-6598
Ball Joint

013106598
139771: RNCC: 3 | RNVC: 2
139771: RNCC: 5 | RNVC: 9
HCE-637: RNCC: D | RNVC: 9

12 Nov 1989

3040-01-312-1957
Mechanical Drive Housing

013121957
6300515: RNCC: 3 | RNVC: 2

12 Dec 1989

3040-01-314-0986
Remote Control Lever

013140986
3897-062: RNCC: 3 | RNVC: 2

24 Jan 1990

3040-01-314-4379
Straight Shaft

013144379
810335: RNCC: 3 | RNVC: 2
810300PL FIND 16: RNCC: 5 | RNVC: 9
810335: RNCC: 5 | RNVC: 9
810300: RNCC: D | RNVC: 9

30 Jan 1990

3040-01-315-1041
Manual Control Lever

013151041
B2103: RNCC: 3 | RNVC: 2

9 Feb 1990

3040-01-315-1083
Rigid Connecting Link

013151083
270AS126-1: RNCC: 3 | RNVC: 2
270AS126: RNCC: D | RNVC: 9

9 Feb 1990

3040-01-315-8191
Linear Actuating Cylinder Assembly Parts Kit

013158191
1543253C1: RNCC: 3 | RNVC: 2
G109456: RNCC: 5 | RNVC: 9

23 Feb 1990

3040-01-315-8194
Linear Actuating Cylinder Assembly Parts Kit

013158194
1543264C1: RNCC: 3 | RNVC: 2
G109479: RNCC: 5 | RNVC: 9

23 Feb 1990

3040-01-270-9398
Straight Shaft

012709398
87832-1649 ITEM 73: RNCC: 3 | RNVC: 2
709-4684920 ITEM 73: RNCC: 5 | RNVC: 2

15 Jan 1988

3040-01-271-0306
Nonrotating Shaft Eye Bracket

012710306
12359272: RNCC: 3 | RNVC: 2

16 Jan 1988

3040-01-279-9004
Straight Shaft

012799004
3501107-3: RNCC: 3 | RNVC: 2
3501107-3: RNCC: 5 | RNVC: 2
10107004: RNCC: 6 | RNVC: 9

26 May 1988

3040-01-279-9254
Mechanical Drive Housing

012799254
3501586-3: RNCC: 3 | RNVC: 2

26 May 1988

3040-01-252-2658
Linear Actuating Cylinder Assembly Parts Kit

012522658
9-752-100550: RNCC: 3 | RNVC: 2

31 Mar 1987

3040-01-252-4660
Shouldered Shaft

012524660
68A810802-2023: RNCC: 3 | RNVC: 2

3 Apr 1987

3040-01-254-4931
Hub Clamp

012544931
13027559: RNCC: 3 | RNVC: 2
C226: RNCC: 5 | RNVC: 2
CG2-16-S: RNCC: 5 | RNVC: 9
10085880: RNCC: 6 | RNVC: 9

5 May 1987

3040-01-255-2383
Bell Crank

012552383
L5235144-001: RNCC: 3 | RNVC: 2
L5235144-001: RNCC: 5 | RNVC: 2

16 May 1987

3040-01-255-4454
Rigid Connecting Link

012554454
123C13240-507: RNCC: 3 | RNVC: 2
123C13240-507: RNCC: 5 | RNVC: 2
123C13240-507: RNCC: 5 | RNVC: 2
123C13240-507: RNCC: 5 | RNVC: 9
123C13240: RNCC: D | RNVC: 9

20 May 1987

3040-01-256-3710
Flexible Shaft Assembly Core

012563710
57353-80: RNCC: 3 | RNVC: 2

4 Jun 1987

3040-01-258-1629
Push-Pull Control Assembly

012581629
0N363383-501: RNCC: 3 | RNVC: 2

29 Jun 1987

3040-01-258-4363
Flexible Shaft Assembly Core

012584363
75A603508-2005: RNCC: 3 | RNVC: 2
2600888-135-05: RNCC: 5 | RNVC: 2
75A603508-2005: RNCC: 5 | RNVC: 2
DS23/2-135.050: RNCC: 5 | RNVC: 9
2600888-135-05: RNCC: 5 | RNVC: 9
75A603508-2005: RNCC: 5 | RNVC: 9
DS23/2-135.050: RNCC: 5 | RNVC: 9
75A603508-2005: RNCC: C | RNVC: 1

3 Jul 1987

3040-01-258-4840
Detent Plate

012584840
209-001-818-103: RNCC: 3 | RNVC: 2
209-001-818-101: RNCC: 5 | RNVC: 9

3 Jul 1987

3040-01-258-9485
Shaft Retaining Plate

012589485
2051G74-1: RNCC: 3 | RNVC: 2
2051G74-001: RNCC: 5 | RNVC: 9
2051G74-001: RNCC: 5 | RNVC: 9
2051G74: RNCC: D | RNVC: 9

10 Jul 1987

3040-01-259-7276
Straight Shaft

012597276
123SEMM40004-1: RNCC: 3 | RNVC: 2
123SEMM40004-1: RNCC: 5 | RNVC: 9

21 Jul 1987

3040-01-259-7653
Body Hub

012597653
10-16-179-001: RNCC: 3 | RNVC: 9
10-16-179-001: RNCC: 5 | RNVC: 9
3040PL0811731: RNCC: 6 | RNVC: 9

22 Jul 1987

3040-01-259-8646
Helical Gearshaft

012598646
72C-2A16: RNCC: 3 | RNVC: 2
72C-2A16: RNCC: 3 | RNVC: 9
72C-2A16: RNCC: 5 | RNVC: 9

22 Jul 1987

3040-01-260-3726
Straight Shaft

012603726
6289610: RNCC: 3 | RNVC: 2

30 Jul 1987

3040-01-264-4754
Manual Control Lever

012644754
5-32-6602-00: RNCC: 3 | RNVC: 2

2 Oct 1987

3040-01-264-5563
Straight Shaft

012645563
3176772: RNCC: 3 | RNVC: 2
03.01 OPTION BP6042 REFERENCE 26: RNCC: 5 | RNVC: 2
03.01 OPTION BP6042/26: RNCC: 5 | RNVC: 2
3176772: RNCC: 5 | RNVC: 2

2 Oct 1987

3040-01-265-2638
Spur Gearshaft

012652638
A12213: RNCC: 3 | RNVC: 2

11 Oct 1987

3040-01-266-3666
Shouldered Shaft

012663666
977717-03: RNCC: 3 | RNVC: 2
977717-03: RNCC: 3 | RNVC: 9

23 Oct 1987

3040-01-266-5599
Remote Control Lever

012665599
VCGTX15-W/1238: RNCC: 3 | RNVC: 2
031-00002: RNCC: 5 | RNVC: 2

27 Oct 1987

3040-01-266-3693
Linear Actuating Cylinder Assembly

012663693
B-1/2/1.75/3/1/4J2: RNCC: 3 | RNVC: 2
Z20113C050: RNCC: 5 | RNVC: 2
B-1/2/1.75/3/1/4J2: RNCC: 5 | RNVC: 9

23 Oct 1987

3040-01-266-7076
Bell Crank

012667076
4F51735-101C: RNCC: 3 | RNVC: 2
4F51735 101B: RNCC: 5 | RNVC: 9

30 Oct 1987

3040-01-267-6153
Shaft Retaining Plate

012676153
9380039: RNCC: 3 | RNVC: 2

14 Nov 1987

3040-01-268-3574
Manual Control Lever

012683574
5400148: RNCC: 3 | RNVC: 2
5400148: RNCC: 5 | RNVC: 9

28 Nov 1987

3040-01-261-6704
Straight Shaft

012616704
05061-6207: RNCC: 3 | RNVC: 2
05061-6207: RNCC: 3 | RNVC: 9
05061-6207: RNCC: 5 | RNVC: 9

17 Aug 1987

3040-01-262-6040
Shaft Collar

012626040
65335-043056: RNCC: 3 | RNVC: 2
61530-064047 ITEM 200: RNCC: 5 | RNVC: 2
61530-064047: RNCC: D | RNVC: 9

2 Sep 1987

3040-01-262-3282
Transmission Insert

012623282
844173-1: RNCC: 3 | RNVC: 2
844173: RNCC: D | RNVC: 9

27 Aug 1987

3040-01-262-1196
Manual Control Lever

012621196
1324350: RNCC: 3 | RNVC: 2
309097: RNCC: 5 | RNVC: 9
1324350: RNCC: 5 | RNVC: 9

22 Aug 1987

3040-01-263-7213
Linear Actuating Cylinder Piston

012637213
334439: RNCC: 3 | RNVC: 2
334439: RNCC: 5 | RNVC: 9

17 Sep 1987

3040-01-264-3573
Bell Crank

012643573
413-10696-1: RNCC: 3 | RNVC: 2

29 Sep 1987

3040-01-270-6390
Shouldered Shaft

012706390
75610: RNCC: 3 | RNVC: 2
75580 ITEM 6: RNCC: 5 | RNVC: 2

11 Jan 1988

3040-01-271-3820
Remote Control Lever

012713820
3913326: RNCC: 3 | RNVC: 2
2EP7: RNCC: 5 | RNVC: 2
2EP7: RNCC: 5 | RNVC: 9

23 Jan 1988

3040-01-271-3894
Core

012713894
B-419-9132-202: RNCC: 3 | RNVC: 2
9132-202: RNCC: 5 | RNVC: 2
13638-503: RNCC: 5 | RNVC: 9
25299-802: RNCC: 5 | RNVC: 9
169634-8: RNCC: 5 | RNVC: 9
14866-803: RNCC: 5 | RNVC: 9
S25299-802: RNCC: 5 | RNVC: 9

23 Jan 1988

3040-01-271-8964
Pawl

012718964
74A831026-2011: RNCC: 3 | RNVC: 2
74A831026-2011: RNCC: 5 | RNVC: 2
10107000: RNCC: 6 | RNVC: 9

2 Feb 1988

3040-01-273-3206
Shaft Collar

012733206
R59688P1T2: RNCC: 3 | RNVC: 2
R59688P1T2: RNCC: 3 | RNVC: 9
R59688P1T2: RNCC: 5 | RNVC: 9
R59688P1T2: RNCC: 5 | RNVC: 9

24 Feb 1988

3040-01-273-3353
Straight Shaft

012733353
2041829-2: RNCC: 3 | RNVC: 2
2041829-2: RNCC: 5 | RNVC: 9

24 Feb 1988

3040-01-273-9527
Shaft Collar

012739527
9377240: RNCC: 3 | RNVC: 2

3 Mar 1988

3040-01-274-9373
Mechanical Drive Housing

012749373
12351507: RNCC: 3 | RNVC: 2

16 Mar 1988

3040-01-277-0323
Linear Actuating Cylinder Assembly Parts Kit

012770323
4960211: RNCC: 3 | RNVC: 2
4960211: RNCC: 5 | RNVC: 9

16 Apr 1988

3040-01-277-6888
Shouldered Shaft

012776888
75A30000-149: RNCC: 3 | RNVC: 2

26 Apr 1988

3040-01-276-8363
Shifter Shoe

012768363
7B1-06871: RNCC: 3 | RNVC: 2
2D3-990 ITEM 14: RNCC: 5 | RNVC: 9
2D3-990 PC 14: RNCC: 5 | RNVC: 9
7B1-06871: RNCC: 5 | RNVC: 9
2B1-33: RNCC: 5 | RNVC: 9

14 Apr 1988

3040-01-279-3287
Bell Crank

012793287
324037: RNCC: 3 | RNVC: 9
ZB0324037: RNCC: 5 | RNVC: 2
324037: RNCC: 5 | RNVC: 2
324037: RNCC: 5 | RNVC: 9
324037: RNCC: 5 | RNVC: 9
324037: RNCC: 5 | RNVC: 9

16 May 1988

3040-01-281-8506
Shaft Collar

012818506
DAA3221D226-001: RNCC: 3 | RNVC: 2
DAA3221D226-001: RNCC: 5 | RNVC: 9

3 Jul 1988

3040-01-281-8003
Linear Actuating Cylinder Assembly

012818003
7372100255: RNCC: 3 | RNVC: 2
7-372-100086: RNCC: 5 | RNVC: 9
6-372-003064: RNCC: 5 | RNVC: 9

1 Jul 1988

3040-01-281-8706
Rigid Connecting Link

012818706
DAA3221A259-001: RNCC: 3 | RNVC: 2
DAA3221A259-001: RNCC: 5 | RNVC: 9

3 Jul 1988

3040-01-281-8707
Rigid Connecting Link

012818707
16P1103-801: RNCC: 3 | RNVC: 2
16P1103-801: RNCC: 5 | RNVC: 2
16P1103-801: RNCC: 5 | RNVC: 2
16P1103-801: RNCC: 5 | RNVC: 2
16P1103-801: RNCC: 5 | RNVC: 2
16P1103-3: RNCC: 5 | RNVC: 9

3 Jul 1988

3040-01-282-0296
Control Cam

012820296
16L322-9: RNCC: 3 | RNVC: 2
16L322-9: RNCC: 5 | RNVC: 2
16L322-9: RNCC: 5 | RNVC: 2
16L322-9: RNCC: 5 | RNVC: 2
16L322-9: RNCC: 8 | RNVC: 2

7 Jul 1988

3040-01-282-7005
Linear Actuating Cylinder

012827005
510070: RNCC: 3 | RNVC: 2
510070X: RNCC: 5 | RNVC: 2

21 Jul 1988

3040-01-282-4251
Control Cam

012824251
C9250-4: RNCC: 3 | RNVC: 2
C9250-4: RNCC: C | RNVC: 1

15 Jul 1988

3040-01-283-5720
Shouldered Shaft

012835720
2769266-1: RNCC: 3 | RNVC: 2

9 Aug 1988

3040-01-284-2657
Bell Crank Support

012842657
145S1864-3: RNCC: 3 | RNVC: 2
145S1873-1: RNCC: 5 | RNVC: 9

20 Aug 1988

3040-01-284-7434
Shouldered Shaft

012847434
5202547 ITEM 8: RNCC: 3 | RNVC: 2
6110-152 ITEM 8: RNCC: 3 | RNVC: 2
5202547 ITEM 8: RNCC: 5 | RNVC: 9
6110-152 ITEM 8: RNCC: C | RNVC: 1
5202547: RNCC: D | RNVC: 9

30 Aug 1988

3040-01-284-8745
Linear Actuating Cylinder Assembly

012848745
399-8579: RNCC: 3 | RNVC: 2
4T9290: RNCC: 5 | RNVC: 9

2 Sep 1988

3040-01-285-2898
Hub Clamp

012852898
3314: RNCC: 3 | RNVC: 2
3314: RNCC: 5 | RNVC: 9
W-3314: RNCC: 5 | RNVC: 9
W-3314: RNCC: 5 | RNVC: 9

10 Sep 1988

3040-01-285-3111
Bell Crank

012853111
116227-5: RNCC: 3 | RNVC: 2
116227-1: RNCC: 5 | RNVC: 9

10 Sep 1988

3040-01-286-0318
Mechanical Drive Housing

012860318
23048310: RNCC: 3 | RNVC: 2
23048310: RNCC: 8 | RNVC: 2

24 Sep 1988

3040-01-285-6399
Pawl

012856399
116086-1: RNCC: 3 | RNVC: 2

17 Sep 1988

3040-01-286-3398
Bell Crank

012863398
949354-101: RNCC: 3 | RNVC: 2
949354: RNCC: D | RNVC: 9

30 Sep 1988

3040-01-286-5748
Straight Shaft

012865748
12364329: RNCC: 3 | RNVC: 2

5 Oct 1988

3040-01-286-1998
Shouldered Shaft

012861998
T312632: RNCC: 3 | RNVC: 2
T312632: RNCC: 3 | RNVC: 9

28 Sep 1988

3040-01-286-8437
Rigid Connecting Link

012868437
65219-05102-104: RNCC: 3 | RNVC: 2

9 Oct 1988

3040-01-286-9431
Control Cam

012869431
717512859-002: RNCC: 3 | RNVC: 2
717512859: RNCC: D | RNVC: 9

12 Oct 1988

3040-01-288-3291
Gear

012883291
6N7266: RNCC: 3 | RNVC: 2

5 Nov 1988

3040-01-288-7276
Shouldered Shaft

012887276
708-4456376 ITEM 4: RNCC: 3 | RNVC: 2

13 Nov 1988

3040-01-288-5312
Remote Control Lever

012885312
502332: RNCC: 3 | RNVC: 2
2EK280: RNCC: 5 | RNVC: 2
174691 PIECE 3: RNCC: 5 | RNVC: 2
2EK280: RNCC: 5 | RNVC: 9
174691: RNCC: D | RNVC: 9

9 Nov 1988

3040-01-289-3920
Push-Pull Control Assembly

012893920
32377-003-0096.0: RNCC: 3 | RNVC: 9
32377-003-8FT: RNCC: 5 | RNVC: 9
32377-003-08: RNCC: C | RNVC: 1

22 Nov 1988

3040-01-290-6556
Rigid Connecting Link

012906556
209-062-758-103: RNCC: 3 | RNVC: 2

14 Dec 1988

3040-01-290-7375
Flexible Shaft Assembly

012907375
GTC-703-25: RNCC: 3 | RNVC: 2

15 Dec 1988

3040-01-291-8240
Remote Control Lever

012918240
12352780-1: RNCC: 3 | RNVC: 2
12352781: RNCC: D | RNVC: 9
12352780: RNCC: D | RNVC: 9

6 Jan 1989

3040-01-292-6809
Shaft Retaining Plate

012926809
4110757-2: RNCC: 3 | RNVC: 2
4110757-1: RNCC: 5 | RNVC: 9
4110757-1: RNCC: 5 | RNVC: 9

20 Jan 1989

3040-01-292-8010
Brake Band And Lining

012928010
278 0974-801: RNCC: 3 | RNVC: 2
2873051-803: RNCC: 3 | RNVC: 9
2873051-803: RNCC: 5 | RNVC: 2
BA-84-SS-2873051-803: RNCC: 5 | RNVC: 9
BA-84-SS-287305: RNCC: C | RNVC: 1

22 Jan 1989

3040-01-293-6042
Manual Control Lever

012936042
DA595-1: RNCC: 3 | RNVC: 2
DA595: RNCC: 5 | RNVC: 9
DA595: RNCC: 5 | RNVC: 9

3 Feb 1989

3040-01-293-8552
Shouldered Shaft

012938552
803-5001048 PIECE 66: RNCC: 3 | RNVC: 2
5001048: RNCC: D | RNVC: 9

8 Feb 1989

3040-01-294-1114
Linear Actuating Cylinder Assembly

012941114
FEN112: RNCC: 3 | RNVC: 2
11465539: RNCC: 3 | RNVC: 2
C16-21261: RNCC: 5 | RNVC: 2

10 Feb 1989

3040-01-294-4869
Shouldered Shaft

012944869
AM2791-10-17: RNCC: 3 | RNVC: 2
10107008: RNCC: 6 | RNVC: 9

16 Feb 1989

3040-01-296-5966
Pawl

012965966
5985190: RNCC: 3 | RNVC: 2

22 Mar 1989

3040-01-297-0010
Shaft Collar

012970010
56702: RNCC: 3 | RNVC: 2
56702: RNCC: 3 | RNVC: 9
56702: RNCC: 5 | RNVC: 2

27 Mar 1989

3040-01-297-5282
Receiver Connector Assembly

012975282
21070: RNCC: 3 | RNVC: 2

4 Apr 1989

3040-01-297-3396
Push-Pull Control Assembly

012973396
64-032-1728: RNCC: 3 | RNVC: 2
64-032-1728: RNCC: 5 | RNVC: 9
732-1153: RNCC: 5 | RNVC: 9
5859842-2: RNCC: C | RNVC: 1

1 Apr 1989

3040-01-297-5586
Push-Pull Control Assembly

012975586
A6159/07: RNCC: 3 | RNVC: 2
D043154-002-0084.0: RNCC: 3 | RNVC: 9
A6159/07: RNCC: 5 | RNVC: 2
43154: RNCC: 5 | RNVC: 9

4 Apr 1989

3040-01-297-7879
Body Hub

012977879
246656: RNCC: 3 | RNVC: 2

6 Apr 1989

3040-01-297-3519
Push-Pull Control Assembly Adapter Kit

012973519
304309: RNCC: 3 | RNVC: 2
304309: RNCC: 3 | RNVC: 9
304309: RNCC: 5 | RNVC: 9

1 Apr 1989

3040-01-298-8918
Piston Ring

012988918
TF500A-429(600): RNCC: 3 | RNVC: 2
TF500A-429(600): RNCC: 5 | RNVC: 9
TF500A-429(600): RNCC: 5 | RNVC: 9

23 Apr 1989

3040-01-299-2181
Rigid Connecting Link

012992181
116214-4: RNCC: 3 | RNVC: 2

28 Apr 1989

3040-01-299-2213
Rigid Connecting Link

012992213
10518299: RNCC: 3 | RNVC: 2

28 Apr 1989

3040-01-299-9375
Extension Shaft

012999375
361607: RNCC: 3 | RNVC: 2
1053-361607: RNCC: 5 | RNVC: 2

7 May 1989

3040-01-300-3155
Rigid Connecting Link

013003155
12524486: RNCC: 3 | RNVC: 2

12 May 1989

3040-01-301-3003
Linear Actuating Cylinder Piston Rod

013013003
4G262870: RNCC: 3 | RNVC: 2

26 May 1989

3040-01-301-8336
Rigid Connecting Link

013018336
90-2423-13: RNCC: 3 | RNVC: 2

4 Jun 1989

3040-01-302-2492
Brake Band And Lining

013022492
453 8742 607: RNCC: 3 | RNVC: 2
453 8742-609: RNCC: 3 | RNVC: 2
126 270 16 62: RNCC: 3 | RNVC: 2
94211-991: RNCC: 3 | RNVC: 9
453872-609: RNCC: 5 | RNVC: 2
126 270 16 62: RNCC: 5 | RNVC: 9
94211-991: RNCC: 5 | RNVC: 9
4538742-609: RNCC: 5 | RNVC: 9
453872-609: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-302-8202
Linear Actuating Cylinder Piston Rod

013028202
553499: RNCC: 3 | RNVC: 2
GVV-553499: RNCC: 5 | RNVC: 2
553499: RNCC: 5 | RNVC: 9

20 Jun 1989

3040-01-303-4285
Linear Actuating Cylinder Assembly

013034285
7K-AA-4.0-90.0-CHE-1.0-3: RNCC: 3 | RNVC: 2
DBCSHN: RNCC: 5 | RNVC: 9
7K-AA-4.0-90.0-CHE-1.0-3: RNCC: 5 | RNVC: 9
DB4X90-MALE: RNCC: C | RNVC: 1

30 Jun 1989

3040-01-304-0696
Straight Shaft

013040696
3046690: RNCC: 3 | RNVC: 2

11 Jul 1989

3040-01-302-9037
Hub Clamp

013029037
91107: RNCC: 3 | RNVC: 9
91107: RNCC: 5 | RNVC: 9
LE128/40: RNCC: 5 | RNVC: 9
91107: RNCC: 5 | RNVC: 9

21 Jun 1989

3040-01-305-7993
Manual Control Lever

013057993
C522C144: RNCC: 3 | RNVC: 2
H522C001 ITEM 143: RNCC: 5 | RNVC: 2

11 Aug 1989

3040-01-306-3179
Remote Control Lever

013063179
A8241-403 / 82340-307: RNCC: 3 | RNVC: 2

22 Aug 1989

3040-01-305-8013
Linear Actuating Cylinder Assembly

013058013
T-84406-0: RNCC: 3 | RNVC: 2

11 Aug 1989

3040-01-307-3516
Shouldered Shaft

013073516
MHLK-255: RNCC: 3 | RNVC: 2
MLK-255: RNCC: 5 | RNVC: 9

9 Sep 1989

3040-01-308-7958
Control Cam

013087958
437C161-1: RNCC: 3 | RNVC: 2
437C161-1: RNCC: 5 | RNVC: 9
10130541: RNCC: 6 | RNVC: 9

5 Oct 1989

3040-01-309-9567
Shouldered Shaft

013099567
C102172: RNCC: 3 | RNVC: 9
C102172: RNCC: 5 | RNVC: 9
C102.172: RNCC: C | RNVC: 1

26 Oct 1989

3040-01-311-3963
Rigid Connecting Link

013113963
10867131: RNCC: 3 | RNVC: 2

25 Nov 1989

3040-01-312-5315
Shouldered Shaft

013125315
9380322: RNCC: 3 | RNVC: 2

17 Dec 1989

3040-01-312-7281
Friction Lining

013127281
6Y7966: RNCC: 3 | RNVC: 2

21 Dec 1989

3040-01-312-9187
Rigid Connecting Link

013129187
199839-A: RNCC: 3 | RNVC: 2

26 Dec 1989

3040-01-314-0994
Cylinder Hydra Cage

013140994
051-CG001-63: RNCC: 3 | RNVC: 9

24 Jan 1990

3040-01-314-6152
Rigid Connecting Link

013146152
TEMP PN: RNCC: 3 | RNVC: 2
390-5829: RNCC: 3 | RNVC: 9
3905829: RNCC: 3 | RNVC: 9
390-5829: RNCC: 5 | RNVC: 2
10524355: RNCC: 5 | RNVC: 2
390-5829: RNCC: 5 | RNVC: 9

2 Feb 1990

3040-01-315-3993
Manual Control Lever

013153993
5830967: RNCC: 3 | RNVC: 2

15 Feb 1990

3040-01-315-5030
Flexible Control Casing

013155030
7-44525-2: RNCC: 3 | RNVC: 2
75J358010-103: RNCC: 5 | RNVC: 2

16 Feb 1990

3040-01-316-0132
Straight Shaft

013160132
8644612-10: RNCC: 3 | RNVC: 2
8644612-10: RNCC: 5 | RNVC: 9
8644612: RNCC: 5 | RNVC: 9
8644612-10: RNCC: 5 | RNVC: 9
8644612: RNCC: D | RNVC: 9

1 Mar 1990

3040-01-301-9920
Shouldered Shaft

013019920
41386-1: RNCC: 3 | RNVC: 2
41386-1: RNCC: 3 | RNVC: 9
P41386: RNCC: D | RNVC: 9

7 Jun 1989

3040-01-301-8940
Spur Gearshaft

013018940
2W5476: RNCC: 3 | RNVC: 2

5 Jun 1989

3040-01-254-6036
Piston Ring

012546036
0734 401 106: RNCC: 3 | RNVC: 9
0734401106: RNCC: 5 | RNVC: 2

8 May 1987

3040-01-254-6780
Shouldered Shaft

012546780
54945: RNCC: 3 | RNVC: 2

8 May 1987

3040-01-255-0951
Bell Crank

012550951
8693940: RNCC: 3 | RNVC: 2

15 May 1987

3040-01-255-6379
Drive Shaft

012556379
150SG1103: RNCC: 3 | RNVC: 2
150SG1103: RNCC: 5 | RNVC: 9

23 May 1987

3040-01-256-2018
Mechanical Drive Housing

012562018
3867158-3: RNCC: 3 | RNVC: 2
3867158-3: RNCC: 5 | RNVC: 1
3867158-3: RNCC: 5 | RNVC: 9

3 Jun 1987

3040-01-256-1006
Shouldered Shaft

012561006
863C4010432-001: RNCC: 3 | RNVC: 9
863C4010432: RNCC: D | RNVC: 9

31 May 1987

3040-01-256-1898
Shouldered Shaft

012561898
RG37048: RNCC: 3 | RNVC: 2
683L720G01: RNCC: 5 | RNVC: 1

3 Jun 1987

3040-01-257-1627
Remote Control Lever

012571627
80347: RNCC: 3 | RNVC: 2

12 Jun 1987

3040-01-258-5934
Rigid Connecting Link

012585934
5055T53G01: RNCC: 3 | RNVC: 2
4055T10G02: RNCC: 5 | RNVC: 9

4 Jul 1987

3040-01-260-4337
Coupling Plate

012604337
847412: RNCC: 3 | RNVC: 2

31 Jul 1987

3040-01-260-5303
Straight Shaft

012605303
202144-301: RNCC: 3 | RNVC: 9

31 Jul 1987

3040-01-264-7644
Shouldered Shaft

012647644
413-10655-5: RNCC: 3 | RNVC: 2

6 Oct 1987

3040-01-266-2139
Push-Pull Control Assembly

012662139
3781803-3: RNCC: 3 | RNVC: 2
LE162/0041/0040: RNCC: 5 | RNVC: 2
37818-3: RNCC: 5 | RNVC: 9
LE162-0041: RNCC: 7 | RNVC: 2

22 Oct 1987

3040-01-267-3569
Rigid Connecting Link

012673569
3930AS275-2: RNCC: 3 | RNVC: 2
74A733124-2002: RNCC: 5 | RNVC: 9
74A733124-2002: RNCC: 5 | RNVC: 9
74A733124-2002: RNCC: 5 | RNVC: 9
74A733124-2002: RNCC: 5 | RNVC: 9
10106997: RNCC: 6 | RNVC: 9
3930AS275-2: RNCC: C | RNVC: 1

10 Nov 1987

3040-01-267-2100
Remote Control Lever

012672100
1M3688: RNCC: 3 | RNVC: 2

6 Nov 1987

3040-01-268-3559
Linear Actuating Cylinder

012683559
4-100-09814: RNCC: 3 | RNVC: 2
4-100-09814: RNCC: 5 | RNVC: 2
7967041: RNCC: 5 | RNVC: 9

28 Nov 1987

3040-01-268-9954
Bevel Gearshaft

012689954
7-211320021-9: RNCC: 3 | RNVC: 2
7-211320021-9: RNCC: 5 | RNVC: 9
7-211320021-9: RNCC: 5 | RNVC: 9
7-211320021-9: RNCC: 5 | RNVC: 9
7-211320021: RNCC: D | RNVC: 9

10 Dec 1987

3040-01-261-0144
Linear Actuating Cylinder Assembly Parts Kit

012610144
1543250C1: RNCC: 3 | RNVC: 2
G109475: RNCC: 5 | RNVC: 9
G102407: RNCC: C | RNVC: 1

7 Aug 1987

3040-01-260-9545
Rigid Connecting Link

012609545
26-6255: RNCC: 3 | RNVC: 2
26-6255: RNCC: 5 | RNVC: 2
26-6255: RNCC: 5 | RNVC: 2
26-6255: RNCC: 5 | RNVC: 9
26-6255: RNCC: 5 | RNVC: 9

7 Aug 1987

3040-01-261-2630
Bell Crank

012612630
A3013609-1: RNCC: 3 | RNVC: 2
1645130: RNCC: 5 | RNVC: 2
A3013609: RNCC: D | RNVC: 9

11 Aug 1987

3040-01-262-1199
Manual Control Lever

012621199
306117: RNCC: 3 | RNVC: 2
306117: RNCC: 5 | RNVC: 9

22 Aug 1987

3040-01-263-2528
Bell Crank

012632528
F413-11028-1: RNCC: 3 | RNVC: 2

11 Sep 1987

3040-01-263-8873
Straight Shaft

012638873
413-10638-1: RNCC: 3 | RNVC: 2

21 Sep 1987

3040-01-264-2019
Rigid Connecting Link

012642019
935AS114-2: RNCC: 3 | RNVC: 9

26 Sep 1987

3040-01-269-0016
Flexible Drive Shaft

012690016
4-75550: RNCC: 3 | RNVC: 2
703 4818: RNCC: 5 | RNVC: 2
2A-26269-1: RNCC: 5 | RNVC: 2

10 Dec 1987

3040-01-268-2085
Control Cam

012682085
1217-349: RNCC: 3 | RNVC: 2

25 Nov 1987

3040-01-270-4332
Linear Actuating Cylinder Assembly Parts Kit

012704332
330 0684: RNCC: 3 | RNVC: 2

6 Jan 1988

3040-01-271-0305
Nonrotating Shaft Eye Bracket

012710305
12359291: RNCC: 3 | RNVC: 2

16 Jan 1988

3040-01-271-3824
Rigid Connecting Link

012713824
12340994-1: RNCC: 3 | RNVC: 2
5592014: RNCC: 5 | RNVC: 2
5592014-C: RNCC: D | RNVC: 9
12340994: RNCC: D | RNVC: 9

23 Jan 1988

3040-01-273-5676
Manual Control Lever

012735676
352 3861: RNCC: 3 | RNVC: 2
352 3861: RNCC: 5 | RNVC: 9

26 Feb 1988

3040-01-273-7576
Rigid Connecting Link

012737576
70400-02239-043: RNCC: 3 | RNVC: 2
3040PL1950598: RNCC: 6 | RNVC: 9

1 Mar 1988

3040-01-274-3832
Planetary Reduction Gear Carrier

012743832
2472207-1: RNCC: 3 | RNVC: 2

8 Mar 1988

3040-01-275-9055
Brake Shoe

012759055
BAH 354: RNCC: 3 | RNVC: 2

29 Mar 1988

3040-01-275-9051
Shouldered Shaft

012759051
9270422: RNCC: 3 | RNVC: 9

29 Mar 1988

3040-01-276-3857
Shouldered Shaft

012763857
2531113: RNCC: 3 | RNVC: 9

8 Apr 1988

3040-01-277-2748
Straight Shaft Assembly

012772748
2497783: RNCC: 3 | RNVC: 2

20 Apr 1988

3040-01-277-5663
Rigid Connecting Link

012775663
13228E6110: RNCC: 3 | RNVC: 2
BS.2334.00.00.036: RNCC: 5 | RNVC: 9
BS.2318.00.00.079: RNCC: 5 | RNVC: 9

22 Apr 1988

3040-01-278-1901
Pawl

012781901
11460448: RNCC: 3 | RNVC: 2

3 May 1988

3040-01-277-8647
Hydraulic Control Receiver-Transmitter

012778647
D-5296: RNCC: 3 | RNVC: 9

28 Apr 1988

3040-01-278-6208
Straight Shaft

012786208
656D0510-J039A: RNCC: 3 | RNVC: 2

6 May 1988

3040-01-280-0873
Rigid Connecting Link

012800873
12358383: RNCC: 3 | RNVC: 2

31 May 1988

3040-01-280-4357
Push-Pull Control Assembly

012804357
CCX63336: RNCC: 3 | RNVC: 2
301947-003-32: RNCC: 5 | RNVC: 9
301947-003-36: RNCC: 5 | RNVC: 9
301947-003-36: RNCC: 5 | RNVC: 9

9 Jun 1988

3040-01-281-0884
Control Cam

012810884
T58311: RNCC: 3 | RNVC: 2
T58311: RNCC: 3 | RNVC: 9

17 Jun 1988

3040-01-281-4418
Hub Clamp

012814418
6289595: RNCC: 3 | RNVC: 2

23 Jun 1988

3040-01-281-5968
Disc Brake Caliper

012815968
02-515-004: RNCC: 3 | RNVC: 2
14741000 PC16: RNCC: 5 | RNVC: 9

28 Jun 1988

3040-01-281-9708
Linear Actuating Cylinder Assembly Parts Kit

012819708
9-752-100668: RNCC: 3 | RNVC: 2

5 Jul 1988

3040-01-283-3575
Hydraulic Accumulator

012833575
BA050B3T01P2: RNCC: 3 | RNVC: 2
BA05B3T01A1: RNCC: 5 | RNVC: 9
AB20B3T1A1: RNCC: 5 | RNVC: 9

3 Aug 1988

3040-01-283-6803
Rigid Connecting Link

012836803
DAA3221A258-001: RNCC: 3 | RNVC: 2
DAA3221A258-001: RNCC: 5 | RNVC: 9

11 Aug 1988

3040-01-283-8065
Body Hub

012838065
6433331-02: RNCC: 3 | RNVC: 2
6433331-02: RNCC: 5 | RNVC: 9

12 Aug 1988

3040-01-285-2245
Control Cam

012852245
116280-2: RNCC: 3 | RNVC: 2
116280-6: RNCC: 5 | RNVC: 9

8 Sep 1988

3040-01-285-7891
Rigid Connecting Link

012857891
116034-1: RNCC: 3 | RNVC: 2

21 Sep 1988

3040-01-285-9213
Pawl

012859213
116086-2: RNCC: 3 | RNVC: 2

22 Sep 1988

3040-01-285-8861
Straight Shaft

012858861
11450134-1: RNCC: 3 | RNVC: 2
11450134-1: RNCC: 5 | RNVC: 1

22 Sep 1988

3040-01-286-0170
Linear Actuating Cylinder Piston

012860170
P97-1: RNCC: 3 | RNVC: 2
3-4130 PIECE 29: RNCC: 5 | RNVC: 2
3-4130: RNCC: D | RNVC: 9

24 Sep 1988

3040-01-286-1132
Shouldered Shaft

012861132
11450115-1: RNCC: 3 | RNVC: 2
11450115-1: RNCC: 5 | RNVC: 1

27 Sep 1988

3040-01-286-3369
Spur Gearshaft

012863369
T215734: RNCC: 3 | RNVC: 2
T215734: RNCC: 3 | RNVC: 9
E015538 PC14: RNCC: 5 | RNVC: 9

30 Sep 1988

3040-01-286-4807
Shaft Wheel Assembl

012864807
9N2043: RNCC: 3 | RNVC: 2

2 Oct 1988

3040-01-286-7752
Brake Disc

012867752
11629984: RNCC: 3 | RNVC: 2

8 Oct 1988

3040-01-287-8959
Linear Actuating Cylinder Piston

012878959
C-6278: RNCC: 3 | RNVC: 2
C-6278: RNCC: 5 | RNVC: 9
600-1787: RNCC: D | RNVC: 9

28 Oct 1988

3040-01-287-9736
Shouldered Shaft

012879736
3050394: RNCC: 3 | RNVC: 2
3000889: RNCC: C | RNVC: 1
MA280 21 041: RNCC: C | RNVC: 1

29 Oct 1988

3040-01-286-9430
Control Cam

012869430
717512859-001: RNCC: 3 | RNVC: 2
717512859: RNCC: D | RNVC: 9

12 Oct 1988

3040-01-289-1453
Brake Shoe

012891453
K161: RNCC: 3 | RNVC: 9
K161: RNCC: 5 | RNVC: 2

17 Nov 1988

3040-01-289-1424
Rigid Connecting Link

012891424
70400-08158-102: RNCC: 3 | RNVC: 2
70400-08158-102: RNCC: 5 | RNVC: 2
70400-08158-102: RNCC: 5 | RNVC: 9

17 Nov 1988

3040-01-289-3596
Shouldered Shaft

012893596
312969: RNCC: 3 | RNVC: 2
T001312969: RNCC: 3 | RNVC: 9
A31040002 ITEM 18: RNCC: 5 | RNVC: 9
312969: RNCC: 5 | RNVC: 9
A31040002: RNCC: 5 | RNVC: 9

22 Nov 1988

3040-01-290-3530
Rigid Connecting Link

012903530
P-171081: RNCC: 3 | RNVC: 2
RC-60: RNCC: 3 | RNVC: 9

9 Dec 1988

3040-01-290-2521
Shouldered Shaft

012902521
1199-A-3719: RNCC: 3 | RNVC: 2
M-2722: RNCC: 3 | RNVC: 2

8 Dec 1988

3040-01-290-4961
Straight Shaft

012904961
67A311B40: RNCC: 3 | RNVC: 2

12 Dec 1988

3040-01-291-9331
Shouldered Shaft

012919331
10109969-101: RNCC: 3 | RNVC: 2
10109969-101: RNCC: 5 | RNVC: 2

7 Jan 1989

3040-01-292-2510
Shouldered Shaft

012922510
A1730-2: RNCC: 3 | RNVC: 2
A1730: RNCC: D | RNVC: 9

13 Jan 1989

3040-01-292-6779
Control Cam

012926779
2685600: RNCC: 3 | RNVC: 2
4110053-2: RNCC: 5 | RNVC: 9

20 Jan 1989

3040-01-292-6246
Straight Shaft

012926246
36D423466P1: RNCC: 3 | RNVC: 2
36D423466P1: RNCC: 5 | RNVC: 9
10107006: RNCC: 6 | RNVC: 9

20 Jan 1989

3040-01-292-8835
Spur Gearshaft

012928835
117005-1: RNCC: 3 | RNVC: 2
117005-1: RNCC: 5 | RNVC: 9
117005: RNCC: D | RNVC: 9

23 Jan 1989

3040-01-293-8592
Rigid Connecting Link

012938592
4706-3: RNCC: 3 | RNVC: 2
74J668000-119: RNCC: 5 | RNVC: 2
4706-3-G: RNCC: 5 | RNVC: 2
10107007: RNCC: 6 | RNVC: 9
4706: RNCC: D | RNVC: 9

8 Feb 1989

3040-01-294-1635
Brake Shoe

012941635
9240-032-16: RNCC: 3 | RNVC: 2
29-16: RNCC: 5 | RNVC: 2
9240-032-16: RNCC: C | RNVC: 1
9240-032: RNCC: D | RNVC: 9

11 Feb 1989

3040-01-294-2508
Hydraulic Accumulator Cylinder

012942508
2300-578 PIECE 3: RNCC: 3 | RNVC: 1
845-4457742 PIECE 3: RNCC: 5 | RNVC: 1
2300-578 PIECE 3SS: RNCC: 5 | RNVC: 2
845-4457742 PIECE 3SS: RNCC: 5 | RNVC: 2

14 Feb 1989

3040-01-294-0620
Straight Shaft

012940620
74A425056-2005: RNCC: 3 | RNVC: 2
74A425056-2005: RNCC: 5 | RNVC: 9

10 Feb 1989

3040-01-293-8548
Shouldered Shaft

012938548
6607513: RNCC: 3 | RNVC: 2
6607513: RNCC: 5 | RNVC: 9

8 Feb 1989

3040-01-295-1399
Rigid Connecting Link

012951399
74A661229-1001: RNCC: 3 | RNVC: 2
10355883: RNCC: 6 | RNVC: 9

1 Mar 1989

3040-01-296-0522
Spindle Hydraulic

012960522
317-1078: RNCC: 3 | RNVC: 2
10524152: RNCC: 5 | RNVC: 2
317-1078: RNCC: 5 | RNVC: 9

16 Mar 1989

3040-01-296-7004
Nonvehicular Propeller Shaft

012967004
4007300: RNCC: 3 | RNVC: 2

23 Mar 1989

3040-01-297-6887
Shaft Collar

012976887
8877767-01: RNCC: 3 | RNVC: 2
8877767-01: RNCC: 5 | RNVC: 9

6 Apr 1989

3040-01-297-5983
Straight Shaft

012975983
1W4449: RNCC: 3 | RNVC: 2

4 Apr 1989

3040-01-297-7308
Remote Control Lever

012977308
7379889: RNCC: 3 | RNVC: 2

6 Apr 1989

3040-01-297-9106
Linear Actuating Cylinder Cap

012979106
CEC4-5219-06: RNCC: 3 | RNVC: 2
CEC 5219-06: RNCC: 5 | RNVC: 9
CEC 5219: RNCC: 5 | RNVC: 9

8 Apr 1989

3040-01-298-8634
Straight Shaft

012988634
36-155-090: RNCC: 3 | RNVC: 2
6455007624: RNCC: 5 | RNVC: 9
1 3/16DIA X 20: RNCC: C | RNVC: 1

22 Apr 1989

3040-01-298-8330
Linear Actuating Cylinder Assembly

012988330
1H000196528: RNCC: 3 | RNVC: 2
GG122908A0: RNCC: 5 | RNVC: 9

22 Apr 1989

3040-01-299-0530
Manual Control Lever

012990530
8764339: RNCC: 3 | RNVC: 2

24 Apr 1989

3040-01-299-2182
Rigid Connecting Link

012992182
116214-3: RNCC: 3 | RNVC: 2

28 Apr 1989

3040-01-299-9796
Piston Ring

012999796
960145-96: RNCC: 3 | RNVC: 2
960145-96: RNCC: 5 | RNVC: 2

9 May 1989

3040-01-301-4655
Shouldered Shaft

013014655
F-64HEA10X1A: RNCC: 3 | RNVC: 9
PL10699-F-18 PIECE 10: RNCC: 5 | RNVC: 9
PL10699-F-18 PIECE 10: RNCC: C | RNVC: 1
F-64HEA10X1A: RNCC: C | RNVC: 1

29 May 1989

3040-01-301-8102
Bell Crank

013018102
11671044: RNCC: 3 | RNVC: 2

3 Jun 1989

3040-01-303-5773
Bell Crank

013035773
11671046: RNCC: 3 | RNVC: 2

1 Jul 1989

3040-01-304-1069
Body Hub

013041069
13080306: RNCC: 3 | RNVC: 2
13080306: RNCC: 5 | RNVC: 2
13080306: RNCC: 5 | RNVC: 9
13080306: RNCC: 5 | RNVC: 9

12 Jul 1989

3040-01-305-5696
Shouldered Shaft

013055696
3178450: RNCC: 3 | RNVC: 2
3178450: RNCC: 5 | RNVC: 2
3176835: RNCC: 5 | RNVC: 9

8 Aug 1989

3040-01-305-5739
Manual Control Lever

013055739
ML50K-556: RNCC: 3 | RNVC: 2
ML50K-556: RNCC: 5 | RNVC: 9

8 Aug 1989

3040-01-306-0566
Extension Shaft

013060566
6992-01500: RNCC: 3 | RNVC: 2
19-80-0638B: RNCC: 5 | RNVC: 9

16 Aug 1989

3040-01-310-0033
Brake Band And Lining

013100033
2C1-1318: RNCC: 3 | RNVC: 2
2C1-01318: RNCC: 5 | RNVC: 2

27 Oct 1989

3040-01-309-8171
Worm Wheel Gearshaft

013098171
60-420-0147-1: RNCC: 3 | RNVC: 2
01-435-0192-5 3E8201 PC 17: RNCC: 5 | RNVC: 2
60-420-0143-1: RNCC: C | RNVC: 1
01-435-0192-5-3: RNCC: D | RNVC: 9

24 Oct 1989

3040-01-310-0248
Shaft Retaining Plate

013100248
2039653-2: RNCC: 3 | RNVC: 2
2039653-2: RNCC: 5 | RNVC: 2

27 Oct 1989

3040-01-310-0757
Shouldered Shaft

013100757
65-40091-8: RNCC: 3 | RNVC: 2
65-40091-8: RNCC: 5 | RNVC: 9

29 Oct 1989

3040-01-310-1791
Remote Control Lever

013101791
74A733109-2003: RNCC: 3 | RNVC: 2
3930AS549: RNCC: 3 | RNVC: 2
74A733109-2003: RNCC: 5 | RNVC: 2
10372581: RNCC: 6 | RNVC: 9

31 Oct 1989

3040-01-310-2337
Pawl

013102337
203: RNCC: 3 | RNVC: 2

1 Nov 1989

3040-01-310-4848
Rigid Connecting Link

013104848
4905-157: RNCC: 3 | RNVC: 2
75J618002-157: RNCC: 5 | RNVC: 2
4905: RNCC: D | RNVC: 9

4 Nov 1989

3040-01-310-4838
Remote Control Lever

013104838
10866847: RNCC: 3 | RNVC: 2

4 Nov 1989

3040-01-311-3949
Manual Control Lever

013113949
5-17-2004-00: RNCC: 3 | RNVC: 2
5-17-2004: RNCC: 5 | RNVC: 9
NI-082-602-A ITEM NO. 18: RNCC: 5 | RNVC: 9
NI-082-602-A: RNCC: D | RNVC: 9

25 Nov 1989

3040-01-311-5092
Mechanical Drive Housing

013115092
10029101: RNCC: 3 | RNVC: 2

29 Nov 1989

3040-01-312-3736
Cylinder Support

013123736
37719: RNCC: 3 | RNVC: 2
37719: RNCC: 5 | RNVC: 9
37719: RNCC: 5 | RNVC: 9

15 Dec 1989

3040-01-312-7318
Straight Shaft

013127318
120714-001: RNCC: 3 | RNVC: 2
100914-01: RNCC: 5 | RNVC: 9
100914-01: RNCC: 5 | RNVC: 9

21 Dec 1989

3040-01-313-4590
Shouldered Shaft

013134590
4F59306-101A: RNCC: 3 | RNVC: 2
4F59306: RNCC: D | RNVC: 9

9 Jan 1990

3040-01-312-9673
Brake Disc

013129673
36630: RNCC: 3 | RNVC: 2
36630: RNCC: 5 | RNVC: 2
36630: RNCC: 5 | RNVC: 9

27 Dec 1989

3040-01-314-0987
Remote Control Lever

013140987
3897-066: RNCC: 3 | RNVC: 2

24 Jan 1990

3040-01-314-2614
Worm Shaft

013142614
932-202-00: RNCC: 3 | RNVC: 2
932-202-00: RNCC: 5 | RNVC: 9

26 Jan 1990

3040-01-314-5918
Remote Control Lever

013145918
368706: RNCC: 3 | RNVC: 2

1 Feb 1990

3040-01-314-7911
Shouldered Shaft

013147911
02-6102-02: RNCC: 3 | RNVC: 2
02-6102-02: RNCC: 3 | RNVC: 9

6 Feb 1990

3040-01-315-8193
Linear Actuating Cylinder Assembly Parts Kit

013158193
1543254C1: RNCC: 3 | RNVC: 2
G109472: RNCC: 5 | RNVC: 9

23 Feb 1990

3040-01-315-8195
Linear Actuating Cylinder Assembly Parts Kit

013158195
1543268C1: RNCC: 3 | RNVC: 2
G109465: RNCC: 5 | RNVC: 9

23 Feb 1990

3040-01-316-0561
Counterbalance Weight

013160561
3755-1: RNCC: 3 | RNVC: 2
3755-1: RNCC: 5 | RNVC: 2
3040PL1014816: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-302-2648
Nonrotating Shaft Eye Bracket

013022648
12577053: RNCC: 3 | RNVC: 2
K-132: RNCC: 5 | RNVC: 2
K-132: RNCC: 5 | RNVC: 9
K-132: RNCC: 5 | RNVC: 9
12577053: RNCC: 5 | RNVC: 9

10 Jun 1989

3040-01-303-1339
Mechanical Drive Housing

013031339
12577077: RNCC: 3 | RNVC: 2
K-103: RNCC: 5 | RNVC: 2
K-103: RNCC: 5 | RNVC: 9
K-103: RNCC: 5 | RNVC: 9
12577077: RNCC: 5 | RNVC: 9

24 Jun 1989

3040-01-186-1369
Shouldered Shaft

011861369
3081152-1: RNCC: 3 | RNVC: 2
3081152-1: RNCC: 5 | RNVC: 9

8 Aug 1984

3040-01-186-1564
Spur-Worm Gearshaft

011861564
2040804-2: RNCC: 3 | RNVC: 2
2040804-2: RNCC: 5 | RNVC: 9

8 Aug 1984

3040-01-187-1206
Straight Shaft

011871206
2B1-976: RNCC: 3 | RNVC: 2

18 Aug 1984

3040-01-187-2915
Shouldered Shaft

011872915
752069-1: RNCC: 3 | RNVC: 2

21 Aug 1984

3040-01-187-4269
Differential Gear Unit

011874269
188C1141P1: RNCC: 3 | RNVC: 2
188C1141P1: RNCC: 5 | RNVC: 2

22 Aug 1984

3040-01-188-3458
Bell Crank

011883458
458-58508-1: RNCC: 3 | RNVC: 2

2 Sep 1984

3040-01-188-7857
Stub Tooth Gearshaft

011887857
810-4385059 PIECE 57: RNCC: 3 | RNVC: 2

7 Sep 1984

3040-01-189-0409
Linear Actuating Cylinder Head

011890409
27149: RNCC: 3 | RNVC: 2
970-27660 ITEM 11: RNCC: 5 | RNVC: 2
970-27660: RNCC: D | RNVC: 9

11 Sep 1984

3040-01-189-2622
Counterbalance Weight

011892622
9524M49P03: RNCC: 3 | RNVC: 2
9524M49P03: RNCC: 5 | RNVC: 9

13 Sep 1984

3040-01-189-2972
Bell Crank

011892972
9511M24P04: RNCC: 3 | RNVC: 2
9511M24P04: RNCC: 5 | RNVC: 9

30 Apr 2014

3040-01-189-8418
Control Cam

011898418
212624: RNCC: 3 | RNVC: 9
212624: RNCC: 5 | RNVC: 2
212624: RNCC: C | RNVC: 1

20 Sep 1984

3040-01-189-8648
Shouldered Shaft

011898648
16609229: RNCC: 3 | RNVC: 2
16609229: RNCC: 3 | RNVC: 9
16400116 PIECE 10: RNCC: 5 | RNVC: 9
16400116 PIECE 10: RNCC: C | RNVC: 1

20 Sep 1984

3040-01-189-8966
Rigid Connecting Link

011898966
123C10229-601: RNCC: 3 | RNVC: 2
123C10229-601: RNCC: 5 | RNVC: 9

20 Sep 1984

3040-01-191-5678
Counterbalance Weight

011915678
952B927-1: RNCC: 3 | RNVC: 2
952B927-1: RNCC: 5 | RNVC: 9

10 Oct 1984

3040-01-191-6639
Bevel Gearshaft

011916639
3602-0232-1: RNCC: 3 | RNVC: 2
3602-0017-1: RNCC: 5 | RNVC: 9
3602-0017: RNCC: D | RNVC: 9

11 Oct 1984

3040-01-191-9390
Straight Shaft

011919390
1231-184-1: RNCC: 3 | RNVC: 2
1231-184-1: RNCC: 3 | RNVC: 9

14 Oct 1984

3040-01-192-2435
Rigid Connecting Link

011922435
75A427117-1001: RNCC: 3 | RNVC: 9
75A427117-1001: RNCC: 5 | RNVC: 2
75A427117: RNCC: D | RNVC: 9

18 Oct 1984

3040-01-192-1640
Linear Actuating Cylinder Assembly Parts Kit

011921640
339307: RNCC: 3 | RNVC: 9
339307: RNCC: 5 | RNVC: 2
1173617C1: RNCC: 5 | RNVC: 2
1173617C1: RNCC: 5 | RNVC: 2
1173617C1: RNCC: 5 | RNVC: 9
1173617C1: RNCC: 5 | RNVC: 9

17 Oct 1984

3040-01-192-5687
Nonrotating Shaft Eye Bracket

011925687
2004336031: RNCC: 3 | RNVC: 2
1308847: RNCC: 5 | RNVC: 9

23 Oct 1984

3040-01-192-8355
Manual Control Lever

011928355
35603315: RNCC: 3 | RNVC: 2
575-G: RNCC: 5 | RNVC: 9

26 Oct 1984

3040-01-193-1755
Linear Actuating Cylinder Cap

011931755
6-753-000604: RNCC: 3 | RNVC: 2
2CD710: RNCC: 5 | RNVC: 2
2CD710: RNCC: 5 | RNVC: 9

31 Oct 1984

3040-01-194-7844
Push-Pull Control Assembly

011947844
DW-4333: RNCC: 3 | RNVC: 2
33280-61: RNCC: 5 | RNVC: 2
3163-PDAE-061-X: RNCC: 5 | RNVC: 2
11022393: RNCC: 7 | RNVC: 2

17 Nov 1984

3040-01-195-1794
Linear Actuating Cylinder Assembly

011951794
SKD-160380: RNCC: 3 | RNVC: 2
SKD-160380: RNCC: 5 | RNVC: 2
10517537: RNCC: 5 | RNVC: 2
2.50CPLS13CX 31.500: RNCC: 5 | RNVC: 9
SKD-160118: RNCC: 5 | RNVC: 9

23 Nov 1984

3040-01-195-4479
Pawl

011954479
S-4127PIECE109: RNCC: 3 | RNVC: 2
S4127 PIECE 64: RNCC: 5 | RNVC: 9
S-4127: RNCC: D | RNVC: 9

29 Nov 1984

3040-01-196-1229
Shouldered Shaft

011961229
458-52264-506: RNCC: 3 | RNVC: 2
458-52264-501: RNCC: 5 | RNVC: 9
458-52264-501: RNCC: 5 | RNVC: 9
458-52264: RNCC: D | RNVC: 9

7 Dec 1984

3040-01-196-6059
Control Cam

011966059
153C6859P1: RNCC: 3 | RNVC: 2

12 Dec 1984

3040-01-197-3687
Straight Shaft

011973687
1210B0963: RNCC: 3 | RNVC: 2
1210B0963: RNCC: 5 | RNVC: 2
1213E2815 FIND 43: RNCC: 5 | RNVC: 9
1210B0963: RNCC: 5 | RNVC: 9
1213E2815 FIND 43: RNCC: D | RNVC: 9

20 Dec 1984

3040-01-197-5510
Push-Pull Control Assembly

011975510
12340829-1: RNCC: 3 | RNVC: 2
12340829-1: RNCC: 5 | RNVC: 2
5579963: RNCC: 5 | RNVC: 9
12340829: RNCC: 5 | RNVC: 9

22 Dec 1984

3040-01-198-4361
Counterbalance Weight

011984361
1285M94P01: RNCC: 3 | RNVC: 2
1285M94P01: RNCC: 5 | RNVC: 9
1285M94P01: RNCC: C | RNVC: 1

9 Jan 1985

3040-01-198-7473
Manual Control Lever

011987473
5584671: RNCC: 3 | RNVC: 2
12340111: RNCC: 3 | RNVC: 2
5342PL0797828: RNCC: 6 | RNVC: 9
5584671-C: RNCC: D | RNVC: 9

11 Jan 1985

3040-01-198-7290
Straight Shaft

011987290
3363658: RNCC: 3 | RNVC: 2
336-3658: RNCC: 5 | RNVC: 9

11 Jan 1985

3040-01-198-9771
Brake Drum

011989771
ES1846: RNCC: 3 | RNVC: 2
ES1846: RNCC: 5 | RNVC: 9

17 Jan 1985

3040-01-199-1649
Body Hub

011991649
4847482: RNCC: 3 | RNVC: 2
4847482: RNCC: D | RNVC: 9

17 Jan 1985

3040-01-199-3120
Standard Hub

011993120
CX14509: RNCC: 3 | RNVC: 2
CX14521: RNCC: 5 | RNVC: 9

19 Jan 1985

3040-01-200-3010
Injector Plung Link

012003010
205462: RNCC: 3 | RNVC: 2

1 Feb 1985

3040-01-200-2421
Manual Control Lever

012002421
25028-03: RNCC: 3 | RNVC: 2
9-926-104067: RNCC: 5 | RNVC: 2
2CC782: RNCC: 5 | RNVC: 2
2CC782: RNCC: 5 | RNVC: 9

31 Jan 1985

3040-01-201-3203
Linear Actuating Cylinder Assembly Parts Kit

012013203
1504: RNCC: 3 | RNVC: 2
1504: RNCC: 5 | RNVC: 9

14 Feb 1985

3040-01-201-5963
Linear Actuating Cylinder Assembly Parts Kit

012015963
PDG8491: RNCC: 3 | RNVC: 2
PDG8491: RNCC: 5 | RNVC: 9

20 Feb 1985

3040-01-201-4952
Brake Shoe

012014952
15-001: RNCC: 3 | RNVC: 2
PDG8448: RNCC: 3 | RNVC: 9

19 Feb 1985

3040-01-201-8545
Control Cam

012018545
3037-736: RNCC: 3 | RNVC: 2

22 Feb 1985

3040-01-202-3232
Counterbalance Weight

012023232
8050049-008: RNCC: 3 | RNVC: 9
X8050049-008: RNCC: 5 | RNVC: 9

28 Feb 1985

3040-01-202-3234
Counterbalance Weight

012023234
26-12107-1: RNCC: 3 | RNVC: 2

28 Feb 1985

3040-01-202-5127
Shouldered Shaft

012025127
93-A279: RNCC: 3 | RNVC: 2

3 Mar 1985

3040-01-202-6915
Extension Shaft

012026915
75A007228-2001: RNCC: 3 | RNVC: 9

5 Mar 1985

3040-01-203-2440
Linear Actuating Cylinder Piston Rod

012032440
321 1924: RNCC: 3 | RNVC: 2

13 Mar 1985

3040-01-204-1576
Counterbalance Weight

012041576
8050049-011: RNCC: 3 | RNVC: 9
X8050049-011: RNCC: 5 | RNVC: 9

22 Mar 1985

3040-01-204-4957
Hydraulic Accumulator

012044957
ACB 30B-12P-NT4: RNCC: 3 | RNVC: 9
ACB30C-12P-NT-4: RNCC: 5 | RNVC: 2
ACB 30B-12P-NT4: RNCC: 5 | RNVC: 9
ACB-30B-12P-NT-: RNCC: C | RNVC: 1
ACB 308-12P-NT4: RNCC: C | RNVC: 1

27 Mar 1985

3040-01-204-5560
Straight Shaft

012045560
12331956: RNCC: 3 | RNVC: 2
13214E2299: RNCC: 5 | RNVC: 9

28 Mar 1985

3040-01-206-0259
Shouldered Shaft

012060259
9338170-1: RNCC: 3 | RNVC: 2

14 Mar 1997

3040-01-206-6989
Extension Shaft

012066989
8025A-2003: RNCC: 3 | RNVC: 2
655894: RNCC: 5 | RNVC: 2

22 Apr 1985

3040-01-206-6337
Straight Shaft

012066337
L3223636-003: RNCC: 3 | RNVC: 2

20 Apr 1985

3040-01-208-1393
Mechanical Equipment Seal Replacement Parts Kit

012081393
SK2-500: RNCC: 3 | RNVC: 2

9 May 1985

3040-01-207-9302
Rigid Connecting Link

012079302
L6410018-013: RNCC: 3 | RNVC: 2

7 May 1985

3040-01-208-2832
Shouldered Shaft

012082832
NF203010-2: RNCC: 3 | RNVC: 2
NF203010-2: RNCC: 3 | RNVC: 9

11 May 1985

3040-01-208-4265
Rigid Connecting Link

012084265
7530-0003: RNCC: 3 | RNVC: 2
7030-3: RNCC: 5 | RNVC: 9

14 May 1985

3040-01-209-5129
Manual Control Lever

012095129
101160PS: RNCC: 3 | RNVC: 2
2BF575: RNCC: 5 | RNVC: 2
2BF275: RNCC: 5 | RNVC: 9
101160: RNCC: 5 | RNVC: 9
2BF275: RNCC: 5 | RNVC: 9

31 May 1985

3040-01-210-5921
Rigid Connecting Link

012105921
1388970: RNCC: 3 | RNVC: 2
1388970: RNCC: 5 | RNVC: 9

14 Jun 1985

3040-01-210-0998
Spur Gearshaft

012100998
698236-3: RNCC: 3 | RNVC: 2
698236-3: RNCC: 3 | RNVC: 2

7 Jun 1985

3040-01-210-6594
Rigid Connecting Link

012106594
70500-02151-101: RNCC: 3 | RNVC: 2
70500-02151-101: RNCC: 5 | RNVC: 2
70500-02151: RNCC: D | RNVC: 9

15 Jun 1985

3040-01-210-6605
Shouldered Shaft

012106605
3862003-4: RNCC: 3 | RNVC: 2

15 Jun 1985

3040-01-211-6681
Outer Clutch Shaft

012116681
4100639-1: RNCC: 3 | RNVC: 2
4100639-1: RNCC: 5 | RNVC: 9

28 Jun 1985

3040-01-213-9628
Flexible Shafting

012139628
8562-100: RNCC: 3 | RNVC: 2
B404-8562: RNCC: 3 | RNVC: 9

3 Aug 1985

3040-01-214-1551
Rotation Cylinder

012141551
170-01031410: RNCC: 3 | RNVC: 2
3209-0008-0: RNCC: 3 | RNVC: 2
2BV540: RNCC: 5 | RNVC: 2
2BV540: RNCC: 5 | RNVC: 9
01031410: RNCC: 5 | RNVC: 9

6 Aug 1985

3040-01-214-3183
Linear Actuating Cylinder Cap

012143183
6-372-002508: RNCC: 3 | RNVC: 2
2CT161: RNCC: 5 | RNVC: 2
2CT161: RNCC: 5 | RNVC: 9

8 Aug 1985

3040-01-215-4484
Shouldered Shaft

012154484
3501595-4: RNCC: 3 | RNVC: 2
3501595-4: RNCC: 5 | RNVC: 9

25 Aug 1985

3040-01-216-4816
Brake Disc

012164816
3030451: RNCC: 3 | RNVC: 2
3030451: RNCC: 5 | RNVC: 2

11 Sep 1985

3040-01-216-5965
Remote Control Lever

012165965
7002533: RNCC: 3 | RNVC: 2
7002533: RNCC: 5 | RNVC: 2

13 Sep 1985

3040-01-216-8207
Worm Shaft

012168207
8960-13: RNCC: 3 | RNVC: 2
8960-13: RNCC: 3 | RNVC: 9

17 Sep 1985

3040-01-216-5165
Manual Control Lever

012165165
27859R: RNCC: 3 | RNVC: 2

12 Sep 1985

3040-01-216-9249
Zinc Collar

012169249
X-5: RNCC: 3 | RNVC: 2
FIG. #252 CAMP PART #X5: RNCC: 3 | RNVC: 9
FIG 252 NO. 7 1-1/4 INCH SIZE: RNCC: 5 | RNVC: 9
19554: RNCC: 5 | RNVC: 9
6169328: RNCC: C | RNVC: 1
6169328: RNCC: D | RNVC: 9

19 Sep 1985

3040-01-218-0357
Rigid Connecting Link

012180357
123PM60804-3: RNCC: 3 | RNVC: 2
123PM60804-3: RNCC: 5 | RNVC: 2
123PM60804-3: RNCC: 5 | RNVC: 2
123PM60804-3: RNCC: 5 | RNVC: 9
123PM60804-3: RNCC: 5 | RNVC: 9
123PM60804-3: RNCC: 5 | RNVC: 9
123PM60804: RNCC: D | RNVC: 9

6 Oct 1985

3040-01-218-2913
Rigid Connecting Link

012182913
4900-103: RNCC: 3 | RNVC: 2
75J618002-103: RNCC: 5 | RNVC: 2
B889100-103: RNCC: 5 | RNVC: 2
75B618002-103: RNCC: 7 | RNVC: 2

10 Oct 1985

3040-01-217-8179
Linear Actuating Cylinder Piston Rod

012178179
AU13858: RNCC: 3 | RNVC: 2
AU13858: RNCC: 5 | RNVC: 9

3 Oct 1985

3040-01-219-1545
Counterbalance Weight

012191545
8019129-017: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-1558
Counterbalance Weight

012191558
8019129-030: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-2247
Remote Control Lever

012192247
85200662: RNCC: 3 | RNVC: 2
85200662: RNCC: 5 | RNVC: 2
85200662: RNCC: 5 | RNVC: 2

23 Oct 1985

3040-01-219-1556
Counterbalance Weight

012191556
8019129-028: RNCC: 3 | RNVC: 9

22 Oct 1985

3040-01-219-6717
Rigid Connecting Link

012196717
123C13240-505: RNCC: 3 | RNVC: 2
123C13240-505: RNCC: 5 | RNVC: 9
123C13240-505: RNCC: C | RNVC: 1
123C13240: RNCC: D | RNVC: 9

31 Oct 1985

3040-01-221-3698
Spur Gearshaft

012213698
397523-014: RNCC: 3 | RNVC: 2
397523: RNCC: D | RNVC: 9

28 Nov 1985

3040-01-221-7771
Straight Shaft

012217771
L102849: RNCC: 3 | RNVC: 2

3 Dec 1985

3040-01-221-9327
Counterbalance Weight

012219327
8019131-039: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-221-9330
Counterbalance Weight

012219330
8019131-042: RNCC: 3 | RNVC: 9

5 Dec 1985

3040-01-222-1834
Counterbalance Weight

012221834
8019131-007: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-222-1842
Counterbalance Weight

012221842
8019131-015: RNCC: 3 | RNVC: 9

7 Dec 1985

3040-01-222-6290
Straight Shaft

012226290
736316: RNCC: 3 | RNVC: 2
736316: RNCC: 5 | RNVC: 9

14 Dec 1985

3040-01-222-9432
Straight Shaft

012229432
2664810: RNCC: 3 | RNVC: 2

20 Dec 1985

3040-01-223-4936
Straight Shaft

012234936
AR-10626: RNCC: 3 | RNVC: 2
3078218: RNCC: 5 | RNVC: 9
3078218: RNCC: 5 | RNVC: 9
AR10626: RNCC: 5 | RNVC: 9

30 Dec 1985

3040-01-224-6458
Remote Control Lever

012246458
2670449: RNCC: 3 | RNVC: 2

19 Jan 1986

3040-01-224-9247
Linear Actuating Cylinder

012249247
12350420: RNCC: 3 | RNVC: 2
1235042: RNCC: 5 | RNVC: 9
7802-018: RNCC: E | RNVC: 8
12296703: RNCC: E | RNVC: 8

24 Jan 1986

3040-01-225-4836
Rigid Connecting Link

012254836
SR12153A3: RNCC: 3 | RNVC: 2

3 Feb 1986

3040-01-226-5972
Extension Shaft

012265972
5186693: RNCC: 3 | RNVC: 2
5186693: RNCC: 5 | RNVC: 2
3040PL0979904: RNCC: 6 | RNVC: 9

20 Feb 1986

3040-01-227-3674
Gear Shaft

012273674
3887K76P001: RNCC: 3 | RNVC: 9
3887K76P001: RNCC: C | RNVC: 1

3 Mar 1986

3040-01-227-6831
Straight Shaft

012276831
60244-40937: RNCC: 3 | RNVC: 2
60244-40937: RNCC: 5 | RNVC: 2

7 Mar 1986

3040-01-228-1729
Bevel Gearshaft

012281729
145D2306-3: RNCC: 3 | RNVC: 2
145D2306-3: RNCC: 5 | RNVC: 2
145D2306-2: RNCC: E | RNVC: 8

15 Mar 1986

3040-01-228-5257
Shouldered Shaft

012285257
44300-694: RNCC: 3 | RNVC: 9
44300-694: RNCC: 5 | RNVC: 9

18 Mar 1986

3040-01-230-3172
Shaft And Se Collar

012303172
064-28897-000: RNCC: 3 | RNVC: 2
064-28897B: RNCC: 5 | RNVC: 9
064-28897: RNCC: C | RNVC: 1
064-28897: RNCC: C | RNVC: 1
064-28897: RNCC: C | RNVC: 1

12 Apr 1986

3040-01-230-5137
Counterbalance Weight

012305137
A334A233-102: RNCC: 3 | RNVC: 2

15 Apr 1986

3040-01-230-8546
Mixing Machine Agitator Shaft

012308546
M-70339: RNCC: 3 | RNVC: 2
70339: RNCC: C | RNVC: 1
M-30339: RNCC: C | RNVC: 1

18 Apr 1986

3040-01-230-8987
Shaft Collar

012308987
KMC-701806: RNCC: 3 | RNVC: 2
701806: RNCC: 3 | RNVC: 2
E-2910 PIECE 170: RNCC: 5 | RNVC: 9
E-2910: RNCC: D | RNVC: 9

19 Apr 1986

3040-01-230-6666
Shouldered Shaft

012306666
BL-10814: RNCC: 3 | RNVC: 2

16 Apr 1986

3040-01-232-8803
Shouldered Shaft

012328803
20045: RNCC: 3 | RNVC: 2

21 May 1986

3040-01-232-7763
Rigid Connecting Link

012327763
145C1014-9: RNCC: 3 | RNVC: 2
145C1014-9: RNCC: 5 | RNVC: 2

21 May 1986

3040-01-234-1788
Gear Retaining Plate

012341788
1529820: RNCC: 3 | RNVC: 2
122193C: RNCC: 3 | RNVC: 2
122193C: RNCC: 5 | RNVC: 9
1529820: RNCC: 5 | RNVC: 9

9 Jun 1986

3040-01-234-4014
Nonrotating Shaft Eye Bracket

012344014
42420-205: RNCC: 3 | RNVC: 9
42420-205: RNCC: 5 | RNVC: 9

13 Jun 1986

3040-01-234-7339
Piston Ring

012347339
740-2-00014-2: RNCC: 3 | RNVC: 2
740-2-00014-21: RNCC: 5 | RNVC: 9
740-6-00113 PIECE 27: RNCC: 5 | RNVC: 9
740-6-00113: RNCC: D | RNVC: 9

19 Jun 1986

3040-01-238-1316
Rigid Connecting Link

012381316
75A190040-2001: RNCC: 3 | RNVC: 2

11 Aug 1986

3040-01-237-3565
Manual Control Lever

012373565
406 302 01 14: RNCC: 3 | RNVC: 2
406 302 01 14: RNCC: 5 | RNVC: 2
406 302 01 14: RNCC: 5 | RNVC: 9

30 Jul 1986

3040-01-238-5776
Hydraulic Accumulator

012385776
BA01B3U01P2: RNCC: 3 | RNVC: 2
BA01B3U01A1: RNCC: 5 | RNVC: 9
800001: RNCC: 5 | RNVC: 9
JCM-15318-001: RNCC: 7 | RNVC: 2

16 Aug 1986

3040-01-238-6148
Control Cam

012386148
5311432C1: RNCC: 3 | RNVC: 2
5311432C1: RNCC: 5 | RNVC: 9
H5315706BPC56: RNCC: C | RNVC: 1
H5315706B: RNCC: D | RNVC: 9
H5315706B: RNCC: D | RNVC: 9
S3103-H3114843B: RNCC: D | RNVC: 9

16 Aug 1986

3040-01-238-6460
Remote Control Lever

012386460
863T2100046-007: RNCC: 3 | RNVC: 9

19 Aug 1986

3040-01-239-5581
Control Cam

012395581
3032-496: RNCC: 3 | RNVC: 2

31 Aug 1986

3040-01-239-9188
Rigid Connecting Link

012399188
322AS119-1: RNCC: 3 | RNVC: 2
322AS119: RNCC: D | RNVC: 9

5 Sep 1986

3040-01-241-7036
Spring Plunger

012417036
1353AS131-1: RNCC: 3 | RNVC: 2
1353AS131-1: RNCC: 3 | RNVC: 2
1353AS131-1: RNCC: 5 | RNVC: 9
1353AS131: RNCC: D | RNVC: 9

1 Oct 1986

3040-01-242-9886
Shouldered Shaft

012429886
62476: RNCC: 3 | RNVC: 2
10106982: RNCC: 6 | RNVC: 9

20 Oct 1986

3040-01-243-3828
Shouldered Shaft

012433828
12349756: RNCC: 3 | RNVC: 2

24 Oct 1986

3040-01-243-4683
Push-Pull Control Assembly

012434683
32477: RNCC: 3 | RNVC: 9

28 Oct 1986

3040-01-244-2681
Pawl

012442681
245046-2: RNCC: 3 | RNVC: 2
245046-2: RNCC: 5 | RNVC: 2
245046: RNCC: D | RNVC: 9

8 Nov 1986

3040-01-246-7675
Spur Gearshaft

012467675
1395AS208: RNCC: 3 | RNVC: 2
1395AS208: RNCC: 5 | RNVC: 9

18 Dec 1986

3040-01-247-2215
Nonrotating Shaft Eye Bracket

012472215
8681934: RNCC: 3 | RNVC: 2

29 Dec 1986

3040-01-248-5059
Straight Shaft

012485059
584-4801321 ITEM 5: RNCC: 3 | RNVC: 2
43-4040-0000: RNCC: 3 | RNVC: 9
584-4801321 REV: RNCC: D | RNVC: 9

24 Jan 1987

3040-01-249-3165
Arm Rest Shaft

012493165
10497-1: RNCC: 3 | RNVC: 2
10497-1: RNCC: 5 | RNVC: 2

10 Feb 1987

3040-01-249-1515
Rigid Connecting Link

012491515
4501-271-G: RNCC: 3 | RNVC: 2
4501-271: RNCC: 3 | RNVC: 9
4501-271-M: RNCC: 5 | RNVC: 9
68B418000-271: RNCC: 5 | RNVC: 9
68B418000-271: RNCC: 5 | RNVC: 9
68B418000: RNCC: D | RNVC: 9

6 Feb 1987

3040-01-249-3585
Shouldered Shaft

012493585
079C0071F084A: RNCC: 3 | RNVC: 2

11 Feb 1987

3040-01-249-6470
Nonvehicular Propeller Shaft

012496470
8010Z1908/1909: RNCC: 3 | RNVC: 2
6010Z1908: RNCC: 5 | RNVC: 9
B7619KACX1: RNCC: 5 | RNVC: 9
B7619KACX1/B761: RNCC: C | RNVC: 1

14 Feb 1987

Load More Results