What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 129 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 129of 575

3040-01-325-5463
Shouldered Shaft

013255463
803-5001048-155: RNCC: 3 | RNVC: 2
803-5001048 PC 155: RNCC: 5 | RNVC: 2
803-5001048-100: RNCC: 5 | RNVC: 9
803-5001048 PC 100: RNCC: 5 | RNVC: 9

6 Sep 1990

3040-01-325-4191
Bevel Gearshaft

013254191
1363M84P03: RNCC: 3 | RNVC: 2

4 Sep 1990

3040-01-325-9106
Remote Control Lever

013259106
361129: RNCC: 3 | RNVC: 2
212767-1: RNCC: 3 | RNVC: 2
363330: RNCC: 5 | RNVC: 2
363330: RNCC: 5 | RNVC: 9

13 Sep 1990

3040-01-327-0304
Push-Pull Control Assembly

013270304
87-30365-001: RNCC: 3 | RNVC: 2
87-30365: RNCC: D | RNVC: 9

5 Oct 1990

3040-01-327-0163
Counterbalance Weight

013270163
406-015-113-101: RNCC: 3 | RNVC: 2

5 Oct 1990

3040-01-328-6392
Straight Shaft

013286392
791-4748-003: RNCC: 3 | RNVC: 2

6 Nov 1990

3040-01-330-0017
Remote Control Lever

013300017
XA-03748: RNCC: 3 | RNVC: 2
XA-03748: RNCC: 5 | RNVC: 2
XA-03748: RNCC: 5 | RNVC: 2
XA-7261 ITEM 5: RNCC: 5 | RNVC: 9
XA-7261: RNCC: D | RNVC: 9

28 Nov 1990

3040-01-330-3265
Linear Actuating Cylinder Assembly

013303265
18D-5: RNCC: 3 | RNVC: 2
017261V: RNCC: 5 | RNVC: 2

1 Dec 1990

3040-01-332-1635
Mechanical Drive Housing

013321635
1988947: RNCC: 3 | RNVC: 2
1988947: RNCC: 5 | RNVC: 9

5 Jan 1991

3040-01-336-9228
Flexible Shaft Assembly

013369228
0312-18729-X-01400: RNCC: 3 | RNVC: 2
A-240-9406: RNCC: 3 | RNVC: 2
12359040: RNCC: 7 | RNVC: 2

3 Apr 1991

3040-01-337-4378
Push-Pull Control Assembly

013374378
133771: RNCC: 3 | RNVC: 2
377372: RNCC: 3 | RNVC: 9
1337771: RNCC: 5 | RNVC: 2
1337771: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-337-4379
Body Hub

013374379
23016723: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-339-5517
Rigid Connecting Link

013395517
335283: RNCC: 3 | RNVC: 2
335283: RNCC: 5 | RNVC: 9

23 May 1991

3040-01-339-9413
Flexible Control Casing

013399413
19392-3: RNCC: 3 | RNVC: 2
6078T71P01: RNCC: 5 | RNVC: 2

4 Jun 1991

3040-01-339-9243
Counterbalance Weight

013399243
4070419CL4: RNCC: 3 | RNVC: 2
4070419CL4: RNCC: 5 | RNVC: 2

4 Jun 1991

3040-01-340-5906
Straight Shaft

013405906
70700-20130-127: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-340-7103
Counterbalance Weight

013407103
AS44520-060: RNCC: 3 | RNVC: 9
AS44520-060: RNCC: 5 | RNVC: 2
AS44520-060: RNCC: 5 | RNVC: 9
AS44520-060: RNCC: 5 | RNVC: 9
AS44520-060: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-341-0184
Control Cam

013410184
99168-01F: RNCC: 3 | RNVC: 2
16944 FIND NO. 10: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-0140
Counterbalance Weight

013410140
2301017: RNCC: 3 | RNVC: 2
AS44522-030: RNCC: 5 | RNVC: 2
AS44522-030: RNCC: 5 | RNVC: 2
AS44522-030: RNCC: 5 | RNVC: 9
AS44520 THRU 23: RNCC: 5 | RNVC: 9
AS44522-030: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-2215
Linear Actuating Cylinder Assembly Parts Kit

013412215
CB252HL005: RNCC: 3 | RNVC: 2

26 Jun 1991

3040-01-341-4995
Linear Actuating Cylinder Assembly Parts Kit

013414995
L070750002: RNCC: 3 | RNVC: 2

1 Jul 1991

3040-01-342-8694
Friction Lining

013428694
90-1600-00400 ITEM 2: RNCC: 3 | RNVC: 9
9630293: RNCC: 5 | RNVC: 2
GB9630293: RNCC: 5 | RNVC: 9
9630293: RNCC: 5 | RNVC: 9
9630293: RNCC: 5 | RNVC: 9
9630293: RNCC: 5 | RNVC: 9
9630241: RNCC: 5 | RNVC: 9
9630293: RNCC: C | RNVC: 1

31 Jul 1991

3040-01-343-0660
Linear Actuating Cylinder

013430660
KG11475: RNCC: 3 | RNVC: 2

4 Aug 1991

3040-01-344-1849
Controllable Swashplate

013441849
741713: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-344-5769
Counterbalance Weight

013445769
335-014-405-0: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-344-5775
Pivot Shaft Assembly

013445775
1725300 W: RNCC: 3 | RNVC: 2
1725300 W: RNCC: 5 | RNVC: 9

31 Aug 1991

3040-01-345-2047
Linear Actuating Cylinder Assembly

013452047
690233C PIECE 53: RNCC: 3 | RNVC: 2
601449: RNCC: 5 | RNVC: 2
690195 ITEM 53: RNCC: 5 | RNVC: 9
203488: RNCC: 5 | RNVC: 9

13 Sep 1991

3040-01-346-1762
Shouldered Shaft

013461762
SA88220037: RNCC: 3 | RNVC: 2
2GE536: RNCC: 5 | RNVC: 2
2GE536: RNCC: 5 | RNVC: 9

28 Sep 1991

3040-01-346-4754
Worm Shaft

013464754
993240: RNCC: 3 | RNVC: 9
993240-1: RNCC: 5 | RNVC: 9
993600PL FIND 3: RNCC: 5 | RNVC: 9

5 Oct 1991

3040-01-347-5915
Planetary Gears Carrier

013475915
SA88412060: RNCC: 3 | RNVC: 2
2GE436: RNCC: 5 | RNVC: 2
2GE436: RNCC: 5 | RNVC: 9

25 Oct 1991

3040-01-347-8566
Shouldered Shaft

013478566
9245-9951-01: RNCC: 3 | RNVC: 2
9245-9951-01T: RNCC: 5 | RNVC: 9
87034A6052: RNCC: 7 | RNVC: 2

30 Oct 1991

3040-01-347-9049
Bell Crank

013479049
C114588-1: RNCC: 3 | RNVC: 2

31 Oct 1991

3040-01-349-2020
Shouldered Shaft

013492020
5-39MIL1-1606-16: RNCC: 3 | RNVC: 9
5-39MIL1-1606-16: RNCC: 5 | RNVC: 2
5-39MIL1-1606-15: RNCC: 5 | RNVC: 9
5-39MIL1-1606-15: RNCC: 5 | RNVC: 9
5-227 ITEM 15 5-39MIL1-1606: RNCC: 5 | RNVC: 9

22 Nov 1991

3040-01-348-8132
Nonrotating Shaft Eye Bracket

013488132
L220120: RNCC: 3 | RNVC: 2
M240209 FIND 4: RNCC: 5 | RNVC: 2
R016492: RNCC: 5 | RNVC: 2
M240209: RNCC: D | RNVC: 9

16 Nov 1991

3040-01-350-2552
Hydraulic Brake

013502552
0022-519-23-002400: RNCC: 3 | RNVC: 2
D-407252: RNCC: 3 | RNVC: 9
022.519.23.002: RNCC: 5 | RNVC: 9
022.519.23.002-100: RNCC: 5 | RNVC: 9
D-407252: RNCC: 5 | RNVC: 9

13 Dec 1991

3040-01-350-3314
Friction Lining Set

013503314
13.5-8480-17X18X47: RNCC: 3 | RNVC: 2
468480 PIECE 17: RNCC: 5 | RNVC: 2

13 Dec 1991

3040-01-350-9162
Nonrotating Shaft Eye Bracket

013509162
12361561-2: RNCC: 3 | RNVC: 2
12361561-2: RNCC: 5 | RNVC: 2
12361561-2: RNCC: 5 | RNVC: 2
12361561: RNCC: D | RNVC: 9

25 Dec 1991

3040-01-353-4662
Bevel Gearshaft

013534662
9961M35P03: RNCC: 3 | RNVC: 2

11 Feb 1992

3040-01-353-0748
Rigid Connecting Link

013530748
12370782: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-354-3353
Shaft Retaining Plate

013543353
520247-1: RNCC: 3 | RNVC: 2

27 Feb 1992

3040-01-354-5430
Pneumatic Actuator Cylinder Housing

013545430
9-734-1000643: RNCC: 3 | RNVC: 2
WLM290093: RNCC: 3 | RNVC: 2
8KP376: RNCC: 5 | RNVC: 2
9-734-1000643: RNCC: 5 | RNVC: 2
9-734-1000643: RNCC: 5 | RNVC: 2
8KP376: RNCC: 5 | RNVC: 9
2CK27: RNCC: C | RNVC: 1

29 Feb 1992

3040-01-354-9075
Adapter Shaft Assembly

013549075
DAA3272P016-431: RNCC: 1 | RNVC: 2
125328C-10: RNCC: 3 | RNVC: 2
125328B-10: RNCC: 5 | RNVC: 9
DAA3272P016-131: RNCC: 5 | RNVC: 9

7 Mar 1992

3040-01-354-9953
Shaft Retaining Plate

013549953
520247-2: RNCC: 3 | RNVC: 2

9 Mar 1992

3040-01-355-0803
Rigid Connecting Link

013550803
4606-537: RNCC: 3 | RNVC: 2
A-C17102-537: RNCC: 5 | RNVC: 2
QPM3510-537: RNCC: 5 | RNVC: 2
17B9F1112-537: RNCC: 7 | RNVC: 2

11 Mar 1992

3040-01-355-9064
Shouldered Shaft Assembly

013559064
1253288-13: RNCC: 3 | RNVC: 2
DAA3272P016-137: RNCC: 5 | RNVC: 2

26 Mar 1992

3040-01-356-2725
Remote Control Lever

013562725
58016-1: RNCC: 3 | RNVC: 2
1869250W: RNCC: 5 | RNVC: 2
1869250W: RNCC: 5 | RNVC: 9

1 Apr 1992

3040-01-356-8672
Shouldered Shaft

013568672
12420-G: RNCC: 3 | RNVC: 2
2GL118: RNCC: 5 | RNVC: 2
12420: RNCC: 5 | RNVC: 2
2GL118: RNCC: 5 | RNVC: 9

12 Apr 1992

3040-01-357-8642
Linear Actuating Cylinder Cap

013578642
23437: RNCC: 3 | RNVC: 2
23437: RNCC: 5 | RNVC: 2

3 May 1992

3040-01-358-6317
Rigid Connecting Link

013586317
17P1A4554-1: RNCC: 3 | RNVC: 2

16 May 1992

3040-01-358-8690
Spur Gearshaft

013588690
17381: RNCC: 3 | RNVC: 2
5938620: RNCC: 5 | RNVC: 2

22 May 1992

3040-01-358-9000
Friction Lining

013589000
3.12.795L: RNCC: 3 | RNVC: 9
3-12-795L(A): RNCC: 5 | RNVC: 2
70143 ITEM-7: RNCC: 5 | RNVC: 2
3-12-795L(A): RNCC: 5 | RNVC: 2
3.12.795L: RNCC: 5 | RNVC: 9
70143: RNCC: D | RNVC: 9

22 May 1992

3040-01-359-5031
Rigid Connecting Link

013595031
12307635-3: RNCC: 3 | RNVC: 2
97393-SR11960A: RNCC: 5 | RNVC: 9
12307635: RNCC: D | RNVC: 9

6 Jun 1992

3040-01-359-6528
Shouldered Shaft

013596528
937510: RNCC: 3 | RNVC: 2
937510: RNCC: 5 | RNVC: 2

10 Jun 1992

3040-01-360-6349
Mechanical Drive Housing

013606349
29506359: RNCC: 3 | RNVC: 2
29506359: RNCC: 5 | RNVC: 2
29506359: RNCC: 5 | RNVC: 2

28 Jun 1992

3040-01-361-2506
Pawl

013612506
320236A: RNCC: 3 | RNVC: 2
320263: RNCC: 3 | RNVC: 9
320236A: RNCC: 5 | RNVC: 9
320236A: RNCC: 5 | RNVC: 9

11 Jul 1992

3040-01-361-6385
Piston Ring Set

013616385
A78093: RNCC: 1 | RNVC: 2
A78093-337PH-99: RNCC: 3 | RNVC: 2
S32152-337-99 PH: RNCC: 3 | RNVC: 9
A78093-337PH-99: RNCC: 5 | RNVC: 2
S32152-337-99 PH: RNCC: 5 | RNVC: 9
S32152: RNCC: D | RNVC: 9

23 Jul 1992

3040-01-363-2541
Pawl

013632541
P1429-208B: RNCC: 3 | RNVC: 2
53X-02-174: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-3881
Shouldered Shaft

013633881
274-07609-000: RNCC: 3 | RNVC: 2
274-07609-000: RNCC: 3 | RNVC: 9
615-E-7546 ITEM 4: RNCC: 5 | RNVC: 9
274-C-7609: RNCC: 5 | RNVC: 9
274-7609: RNCC: 5 | RNVC: 9

29 Aug 1992

3040-01-365-2826
Control Cam

013652826
803-5959218 PIECE 12: RNCC: 3 | RNVC: 2
DN10032: RNCC: 5 | RNVC: 2
803-5959218 REV B PIECE 12: RNCC: 5 | RNVC: 9
803-5959218 REV B: RNCC: D | RNVC: 9

5 Oct 1992

3040-01-365-9149
Shouldered Shaft

013659149
22484-1: RNCC: 3 | RNVC: 2

19 Oct 1992

3040-01-367-4637
Worm Shaft

013674637
12950901: RNCC: 3 | RNVC: 2

12 Nov 1992

3040-01-367-4985
Rigid Connecting Link

013674985
715071K03: RNCC: 3 | RNVC: 2
715071-K3: RNCC: 5 | RNVC: 9

13 Nov 1992

3040-01-368-2702
Control Cam

013682702
211044252: RNCC: 3 | RNVC: 2

27 Nov 1992

3040-01-368-0089
Linear Actuating Cylinder Assembly

013680089
K20004014THAZ: RNCC: 3 | RNVC: 2
8802-062: RNCC: 5 | RNVC: 9
SW25564: RNCC: 7 | RNVC: 2

23 Nov 1992

3040-01-368-6570
Linear Actuating Cylinder Assembly

013686570
CYSR5000HY84T2B-325-6350-138-990: RNCC: 3 | RNVC: 2
89156945: RNCC: 5 | RNVC: 9
8707,C020: RNCC: 5 | RNVC: 9
CYSR 5000 HY-84: RNCC: C | RNVC: 1

5 Dec 1992

3040-01-369-7712
Linear Actuating Cylinder Assembly

013697712
89156935: RNCC: 3 | RNVC: 2
CYSR 5000 HY-84T2B-150-700-63-99: RNCC: 3 | RNVC: 9
89156935: RNCC: 5 | RNVC: 9

6 Jan 1993

3040-01-370-1436
Linear Actuating Cylinder Assembly

013701436
6-372-003494: RNCC: 3 | RNVC: 2
6-372-003494: RNCC: 5 | RNVC: 2
6-372-003494: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-316-3152
Linear Actuating Cylinder Assembly

013163152
706-40495-010: RNCC: 3 | RNVC: 9
MFIX-3ANC1.50X1.00DAL1A: RNCC: 5 | RNVC: 9

8 Mar 1990

3040-01-317-3626
Shaft Idler

013173626
3-419-501-352-54: RNCC: 3 | RNVC: 2
BA-1345-1 PIECE 6: RNCC: 5 | RNVC: 2

29 Mar 1990

3040-01-319-1259
Counterbalance Weight

013191259
4069996: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-1489
Counterbalance Weight

013191489
4071749: RNCC: 3 | RNVC: 2
4071749: RNCC: 5 | RNVC: 2

2 May 1990

3040-01-319-9606
Remote Control Lever

013199606
2677382: RNCC: 3 | RNVC: 2

17 May 1990

3040-01-320-5376
Shouldered Shaft

013205376
3526-098: RNCC: 3 | RNVC: 2

26 May 1990

3040-01-320-9506
Rigid Connecting Link

013209506
4071217-01: RNCC: 3 | RNVC: 2
3040PL0668941: RNCC: 6 | RNVC: 9

6 Jun 1990

3040-01-321-4486
Straight Shaft

013214486
11571032 ITEM 4: RNCC: 3 | RNVC: 2
11571032 ITEM 4: RNCC: 5 | RNVC: 9
11571032 ITEM 4: RNCC: 5 | RNVC: 9

19 Jun 1990

3040-01-322-9362
Rigid Connecting Link

013229362
SW34700-1: RNCC: 3 | RNVC: 2
SW28598: RNCC: 5 | RNVC: 9
SW32247: RNCC: 5 | RNVC: 9
SW34700: RNCC: D | RNVC: 9

17 Jul 1990

3040-01-322-4664
Bell Crank

013224664
1N4674: RNCC: 3 | RNVC: 2

6 Jul 1990

3040-01-323-1347
Rigid Connecting Link

013231347
12553400: RNCC: 3 | RNVC: 2

21 Jul 1990

3040-01-324-1234
Linear Actuating Cylinder Piston

013241234
375 2034 029: RNCC: 3 | RNVC: 2
377 6321 017 ITEM 10: RNCC: 5 | RNVC: 2
377 6321 017: RNCC: D | RNVC: 9

10 Aug 1990

3040-01-325-2357
Shouldered Shaft

013252357
SW28305: RNCC: 3 | RNVC: 2

31 Aug 1990

3040-01-325-2977
Manual Control Lever Assembly

013252977
539856: RNCC: 3 | RNVC: 2
522393: RNCC: 5 | RNVC: 9

31 Aug 1990

3040-01-325-5682
Rigid Connecting Link

013255682
6086293: RNCC: 3 | RNVC: 2

6 Sep 1990

3040-01-325-8109
Pawl

013258109
2046309-2: RNCC: 3 | RNVC: 2

11 Sep 1990

3040-01-326-8635
Linear Actuating Cylinder Piston

013268635
1211335-206: RNCC: 3 | RNVC: 2

3 Oct 1990

3040-01-327-0487
Body Hub

013270487
11515: RNCC: 3 | RNVC: 2
11515: RNCC: 5 | RNVC: 2
11515-G: RNCC: D | RNVC: 9

5 Oct 1990

3040-01-327-2005
Control Cam

013272005
VF-019A-3: RNCC: 3 | RNVC: 2

10 Oct 1990

3040-01-328-8637
Shaft Collar

013288637
12353546: RNCC: 3 | RNVC: 2

8 Nov 1990

3040-01-331-0764
Counterbalance Weight

013310764
3755-9: RNCC: 3 | RNVC: 2
3755-9: RNCC: 5 | RNVC: 2

13 Dec 1990

3040-01-332-3863
Linear Actuating Cylinder Assembly

013323863
160071: RNCC: 3 | RNVC: 2
160071: RNCC: 5 | RNVC: 2

10 Jan 1991

3040-01-333-0213
Brake Disc

013330213
8-003-210-01: RNCC: 3 | RNVC: 2
8-003-210-1: RNCC: 5 | RNVC: 9

21 Jan 1991

3040-01-333-1527
Linear Actuating Cylinder Assembly Parts Kit

013331527
2900381: RNCC: 3 | RNVC: 2
2900381: RNCC: 5 | RNVC: 2

25 Jan 1991

3040-01-333-8467
Shaft Collar

013338467
12916872: RNCC: 3 | RNVC: 2

10 Feb 1991

3040-01-335-7452
Rigid Connecting Link

013357452
10866856: RNCC: 3 | RNVC: 2

13 Mar 1991

3040-01-333-8338
Spur Gearshaft

013338338
406-040-029-101: RNCC: 3 | RNVC: 2
406-040-029: RNCC: D | RNVC: 9

9 Feb 1991

3040-01-336-2586
Turbine Shaft Assembly

013362586
23503793: RNCC: 3 | RNVC: 2
2GH516: RNCC: 5 | RNVC: 2

21 Mar 1991

3040-01-337-7342
Counterbalance Weight

013377342
AT140709: RNCC: 3 | RNVC: 2
AT140709: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-337-4385
Rigid Connecting Link

013374385
75A327427-1001: RNCC: 3 | RNVC: 2
75A327427-1001: RNCC: 5 | RNVC: 2
75A327427-1001: RNCC: 5 | RNVC: 9
75A327427-1001: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-338-5960
Linear Actuating Cylinder Assembly

013385960
12913199: RNCC: 3 | RNVC: 2

7 May 1991

3040-01-338-7238
Breather

013387238
298206: RNCC: 3 | RNVC: 2
WD-6100 ITEM 16: RNCC: 3 | RNVC: 9
DH1307F-3: RNCC: 5 | RNVC: 9
WD-6100: RNCC: D | RNVC: 9

10 May 1991

3040-01-341-0145
Counterbalance Weight

013410145
2301023: RNCC: 3 | RNVC: 9
AS44522-090: RNCC: 5 | RNVC: 2
AS44522-090: RNCC: 5 | RNVC: 9
AS44522-090: RNCC: 5 | RNVC: 9
AS44522-090: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-5024
Counterbalance Weight

013415024
2301025: RNCC: 3 | RNVC: 9
AS44522-120: RNCC: 5 | RNVC: 2
AS44522-120: RNCC: 5 | RNVC: 9
AS44520 THRU 23: RNCC: 5 | RNVC: 9
AS44522-120: RNCC: 5 | RNVC: 9
AS44522-120: RNCC: 5 | RNVC: 9

1 Jul 1991

3040-01-341-7096
Multiple Gears Gearshaft

013417096
206363: RNCC: 3 | RNVC: 2

5 Jul 1991

3040-01-345-5698
Shouldered Shaft

013455698
803-1623943 PC 14: RNCC: 3 | RNVC: 2
803-5184173 PC 12: RNCC: 3 | RNVC: 2
803-1623943 PC: RNCC: C | RNVC: 1
803-5184173: RNCC: D | RNVC: 9
803-1623943: RNCC: D | RNVC: 9

21 Sep 1991

3040-01-346-1835
Linear Actuating Cylinder Piston

013461835
EB-EAA-8700U-21-60: RNCC: 3 | RNVC: 2
EAA-8700: RNCC: 5 | RNVC: 9

28 Sep 1991

3040-01-346-2780
Friction Lining

013462780
061-000-091 ITEM 25: RNCC: 3 | RNVC: 2
000120332-000: RNCC: 5 | RNVC: 2
061-000-091: RNCC: D | RNVC: 9

1 Oct 1991

3040-01-346-2781
Friction Lining

013462781
061-000-091 ITEM 27: RNCC: 3 | RNVC: 2
000011937: RNCC: 5 | RNVC: 2
061-000-091: RNCC: D | RNVC: 9

1 Oct 1991

3040-01-346-4219
Spur Gearshaft

013464219
J214644: RNCC: 3 | RNVC: 2
C90007D055: RNCC: 5 | RNVC: 9
PL-H0007D001 REV C ITEM 54: RNCC: 5 | RNVC: 9
PL-H90007D001 R: RNCC: 5 | RNVC: 9

4 Oct 1991

3040-01-348-6491
Remote Control Lever

013486491
3169760-1: RNCC: 3 | RNVC: 2
3169760-1: RNCC: 5 | RNVC: 9
3169760: RNCC: D | RNVC: 9

14 Nov 1991

3040-01-352-0016
Straight Shaft

013520016
3152722: RNCC: 3 | RNVC: 2
783234: RNCC: 5 | RNVC: 2
783234: RNCC: 5 | RNVC: 9

17 Jan 1992

3040-01-352-9140
Spur Gearshaft

013529140
1387210: RNCC: 3 | RNVC: 2
1387210: RNCC: 5 | RNVC: 9
5198319: RNCC: D | RNVC: 9

1 Feb 1992

3040-01-353-0260
Shouldered Shaft Assembly

013530260
40A2219: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-350-9079
Breather

013509079
569022-12: RNCC: 3 | RNVC: 2
3181000: RNCC: 7 | RNVC: 2

25 Dec 1991

3040-01-353-8348
Straight Shaft

013538348
622219-1: RNCC: 3 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 2
622219-1: RNCC: 5 | RNVC: 9
622219-1: RNCC: 5 | RNVC: 9
622219-1: RNCC: 5 | RNVC: 9

18 Feb 1992

3040-01-354-1134
Link Lever To Spider

013541134
206651: RNCC: 3 | RNVC: 2
1245-V-438: RNCC: 5 | RNVC: 9
1245-V-438: RNCC: 5 | RNVC: 9
37249: RNCC: C | RNVC: 1
1245-V-438: RNCC: C | RNVC: 1

25 Feb 1992

3040-01-354-0535
Spur Gearshaft

013540535
803-5959307-X-053: RNCC: 3 | RNVC: 2
803-5959307: RNCC: D | RNVC: 9

21 Feb 1992

3040-01-354-9184
Linear Actuating Cylinder

013549184
6-372-003660: RNCC: 3 | RNVC: 2
2HE952: RNCC: 5 | RNVC: 2
2HE952: RNCC: 5 | RNVC: 9

7 Mar 1992

3040-01-355-0529
Shouldered Shaft

013550529
5224435-2: RNCC: 3 | RNVC: 2
5224435: RNCC: D | RNVC: 9

11 Mar 1992

3040-01-354-4984
Body Hub

013544984
0246657: RNCC: 3 | RNVC: 1
1070T20PC3: RNCC: 5 | RNVC: 1

29 Feb 1992

3040-01-355-5042
Electrical-Fluid Pressure Connector Assembly

013555042
4101103001: RNCC: 3 | RNVC: 2
4101-103-000: RNCC: 5 | RNVC: 9

19 Mar 1992

3040-01-356-8673
Shouldered Shaft

013568673
12417: RNCC: 3 | RNVC: 2
12417: RNCC: 5 | RNVC: 9
12417-G: RNCC: 5 | RNVC: 9

12 Apr 1992

3040-01-357-0656
Flexible Shaft Assembly Core

013570656
75A603508-2009: RNCC: 3 | RNVC: 2
DS23/2-123.760: RNCC: 5 | RNVC: 9
75A603508: RNCC: D | RNVC: 9

16 Apr 1992

3040-01-357-5850
Straight Shaft

013575850
53X-01-155: RNCC: 3 | RNVC: 9
53X-01-155: RNCC: C | RNVC: 1

27 Apr 1992

3040-01-358-6316
Rigid Connecting Link

013586316
17P1A4553-1: RNCC: 3 | RNVC: 2
17P1A4553-1: RNCC: 5 | RNVC: 2

16 May 1992

3040-01-360-2416
Pneumatic Actuator Cylinder Housing

013602416
1939640: RNCC: 3 | RNVC: 2
1939640: RNCC: 5 | RNVC: 2
1939640: RNCC: 7 | RNVC: 9

20 Jun 1992

3040-01-360-4452
Linear Actuating Cylinder Piston

013604452
171.07.003.01: RNCC: 3 | RNVC: 2

24 Jun 1992

3040-01-360-4449
Mechanical Drive Housing

013604449
29537062: RNCC: 3 | RNVC: 2
29502273: RNCC: 5 | RNVC: 9
23048044: RNCC: 5 | RNVC: 9

24 Jun 1992

3040-01-360-6523
Mechanically Actuated Spindle

013606523
29537934: RNCC: 3 | RNVC: 2
29501574: RNCC: 5 | RNVC: 2
29501574: RNCC: 5 | RNVC: 2
29501574: RNCC: 5 | RNVC: 9
029200T: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-362-0941
Control Cam

013620941
3037-555: RNCC: 3 | RNVC: 2

1 Aug 1992

3040-01-362-3044
Linear Actuating Cylinder Assembly

013623044
H77R2B-400-3800-175-S11-9: RNCC: 3 | RNVC: 9
CYSR4000HY77K2B-400-3800-990: RNCC: 5 | RNVC: 9
89156903: RNCC: 5 | RNVC: 9

4 Aug 1992

3040-01-363-2474
Spur Gearshaft

013632474
3860413-1: RNCC: 3 | RNVC: 2
3860413: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-4370
Linear Actuating Cylinder Piston Rod

013634370
2244M1105: RNCC: 3 | RNVC: 2
2244M1105: RNCC: 5 | RNVC: 2
2244M1105: RNCC: 5 | RNVC: 2
4-62272 ITEM 22: RNCC: 5 | RNVC: 9
2244M1105: RNCC: 5 | RNVC: 9
4-62272: RNCC: D | RNVC: 9

29 Aug 1992

3040-01-366-3826
Shouldered Shaft

013663826
88019-124-1: RNCC: 3 | RNVC: 2

24 Oct 1992

3040-01-367-0139
Shouldered Shaft

013670139
20781-1000: RNCC: 3 | RNVC: 2
20781-001 FIND 8: RNCC: 5 | RNVC: 9

5 Nov 1992

3040-01-367-5495
Accumulator Cap

013675495
12910595-2: RNCC: 3 | RNVC: 2

14 Nov 1992

3040-01-368-7626
Counterbalance Weight

013687626
A44-B5494: RNCC: 3 | RNVC: 2
B5494: RNCC: 5 | RNVC: 9

8 Dec 1992

3040-01-369-2050
Shouldered Shaft

013692050
756776: RNCC: 3 | RNVC: 2

17 Dec 1992

3040-01-369-9146
Shouldered Shaft

013699146
123-6225708 PC 84: RNCC: 3 | RNVC: 2

8 Jan 1993

3040-01-370-0189
Piston Rod Ring

013700189
6-753-000846: RNCC: 3 | RNVC: 2
6-753-000846: RNCC: 5 | RNVC: 2
6-753-000846: RNCC: 5 | RNVC: 2

11 Jan 1993

3040-01-369-9322
Nonrotating Shaft Eye Bracket

013699322
S-1-552-M: RNCC: 3 | RNVC: 2

8 Jan 1993

3040-01-370-1431
Linear Actuating Cylinder Assembly

013701431
CYSR 5000 HY72T2B200663100990: RNCC: 3 | RNVC: 2
89156924: RNCC: 5 | RNVC: 2
89156924: RNCC: 5 | RNVC: 9
CYSR 5000 HY72T2B200663100990: RNCC: 5 | RNVC: 9

14 Jan 1993

3040-01-349-6013
Linear Actuating Cylinder Assembly Parts Kit

013496013
21228-9500: RNCC: 3 | RNVC: 2
21228-9500: RNCC: 5 | RNVC: 9
21228-9500: RNCC: 5 | RNVC: 9

29 Nov 1991

3040-01-350-6353
Manual Control Lever

013506353
12370918: RNCC: 3 | RNVC: 2

19 Dec 1991

3040-01-353-4693
Bell Crank

013534693
17P6F1054-1: RNCC: 3 | RNVC: 2

11 Feb 1992

3040-01-361-2507
Rigid Connecting Link

013612507
12592206: RNCC: 1 | RNVC: 2
ED7015-2: RNCC: 3 | RNVC: 2
12592206: RNCC: 5 | RNVC: 9

11 Jul 1992

3040-01-361-6386
Piston Ring Set

013616386
S32152-345-99 PH: RNCC: 3 | RNVC: 2
A78093-345PH-99: RNCC: 5 | RNVC: 2
S32152-345-99 PH: RNCC: 5 | RNVC: 9
S32152: RNCC: 5 | RNVC: 9
A78093: RNCC: D | RNVC: 9

23 Jul 1992

3040-01-362-3515
Mechanical Drive Housing

013623515
21-P-482: RNCC: 3 | RNVC: 2
21-P-482: RNCC: 5 | RNVC: 2
21-P-482: RNCC: 5 | RNVC: 2
21-P-482: RNCC: 5 | RNVC: 9
21-P-482: RNCC: C | RNVC: 1

5 Aug 1992

3040-01-362-4528
Piston Ring

013624528
116166-2: RNCC: 3 | RNVC: 2

6 Aug 1992

3040-01-358-6150
Shouldered Shaft

013586150
3502025-1: RNCC: 3 | RNVC: 2
3502025: RNCC: D | RNVC: 9

16 May 1992

3040-01-357-5952
Shaft Collar

013575952
65363-06006-102: RNCC: 3 | RNVC: 2

27 Apr 1992

3040-01-365-1942
Rigid Connecting Link

013651942
1348AS1016: RNCC: 3 | RNVC: 2
1348AS1016: RNCC: 5 | RNVC: 2

2 Oct 1992

3040-01-316-0599
Mechanical Drive Housing

013160599
5266275-001: RNCC: 3 | RNVC: 2
5266275: RNCC: D | RNVC: 9

2 Mar 1990

3040-01-316-0562
Counterbalance Weight

013160562
3755-2: RNCC: 3 | RNVC: 2
3755-2: RNCC: 5 | RNVC: 2
3040PL0928078: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-0563
Counterbalance Weight

013160563
3755: RNCC: 3 | RNVC: 2
3755-3: RNCC: 5 | RNVC: 2
3755-3: RNCC: 5 | RNVC: 9
3040PL0928074: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-3468
Linear Actuating Cylinder Assembly Parts Kit

013163468
L065110000: RNCC: 3 | RNVC: 2

8 Mar 1990

3040-01-316-4697
Shouldered Shaft

013164697
968051-1: RNCC: 3 | RNVC: 2
968051: RNCC: D | RNVC: 9

9 Mar 1990

3040-01-316-3470
Linear Actuating Cylinder Assembly Parts Kit

013163470
L065100000: RNCC: 3 | RNVC: 2

8 Mar 1990

3040-01-316-7286
Rotating Shaft Eye Bracket

013167286
4074199: RNCC: 3 | RNVC: 2
4074199: RNCC: 5 | RNVC: 2
4074199: RNCC: 5 | RNVC: 2
3040PL0668528: RNCC: 6 | RNVC: 9

14 Mar 1990

3040-01-316-4875
Rigid Connecting Link

013164875
191158H2: RNCC: 3 | RNVC: 9
191158H2: RNCC: 5 | RNVC: 2
1977947: RNCC: 5 | RNVC: 2
1977947: RNCC: 5 | RNVC: 2
1977947: RNCC: 5 | RNVC: 9

9 Mar 1990

3040-01-317-0367
Rigid Connecting Link

013170367
23610: RNCC: 3 | RNVC: 2
3040013170367: RNCC: 6 | RNVC: 9

22 Mar 1990

3040-01-318-7943
Mechanical Drive Housing

013187943
169-219-120-414-004: RNCC: 3 | RNVC: 2
169-219-120-414-004: RNCC: 5 | RNVC: 2

25 Apr 1990

3040-01-318-9733
Linear Actuating Cylinder Assembly Parts Kit

013189733
L045800000: RNCC: 3 | RNVC: 2

28 Apr 1990

3040-01-319-1486
Counterbalance Weight

013191486
4071746: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-1488
Counterbalance Weight

013191488
4071748: RNCC: 3 | RNVC: 2
4071748: RNCC: 5 | RNVC: 2

2 May 1990

3040-01-320-4715
Rigid Connecting Link

013204715
4071215-01: RNCC: 3 | RNVC: 2
4071215-01: RNCC: 5 | RNVC: 2
3040PL0668584: RNCC: 6 | RNVC: 9

25 May 1990

3040-01-322-6289
Shouldered Shaft

013226289
135B5803-4: RNCC: 3 | RNVC: 2
135B5803: RNCC: D | RNVC: 9

11 Jul 1990

3040-01-323-9131
Counterbalance Weight

013239131
1588M77P01: RNCC: 3 | RNVC: 2

5 Aug 1990

3040-01-323-3415
Shouldered Shaft

013233415
7002536: RNCC: 3 | RNVC: 2
7002536-1: RNCC: 5 | RNVC: 2
7002536-1: RNCC: 5 | RNVC: 2
7002536-1: RNCC: 5 | RNVC: 9
10107021: RNCC: 6 | RNVC: 9
7002536: RNCC: E | RNVC: 8

26 Jul 1990

3040-01-325-2290
Remote Control Lever

013252290
212854-1: RNCC: 3 | RNVC: 2
363079: RNCC: 5 | RNVC: 9

31 Aug 1990

3040-01-325-2354
Straight Shaft

013252354
LG0371-01: RNCC: 3 | RNVC: 2
421966: RNCC: 5 | RNVC: 2
LG0553: RNCC: D | RNVC: 9

31 Aug 1990

3040-01-326-0307
Shouldered Shaft

013260307
218227-1: RNCC: 3 | RNVC: 2

16 Sep 1990

3040-01-326-9028
Extension Shaft

013269028
11724: RNCC: 3 | RNVC: 2
26KP497: RNCC: 5 | RNVC: 2
26KP497: RNCC: 5 | RNVC: 9
11724: RNCC: 5 | RNVC: 9
11724-G: RNCC: D | RNVC: 9

3 Oct 1990

3040-01-326-9122
Shouldered Shaft

013269122
23015: RNCC: 3 | RNVC: 2

3 Oct 1990

3040-01-326-0859
Linear Actuating Cylinder Piston

013260859
3831003-109: RNCC: 3 | RNVC: 2
3831003-109: RNCC: 3 | RNVC: 9

18 Sep 1990

3040-01-327-0143
Straight Shaft

013270143
16-12373-000: RNCC: 3 | RNVC: 2
16-13470-000: RNCC: 5 | RNVC: 9
16-12373: RNCC: D | RNVC: 9

5 Oct 1990

3040-01-327-2035
Linear Actuating Cylinder Assembly

013272035
50607303: RNCC: 3 | RNVC: 2
21173-5000: RNCC: 5 | RNVC: 2
21173-5000: RNCC: 5 | RNVC: 9
607303: RNCC: 5 | RNVC: 9

10 Oct 1990

3040-01-327-7768
Rigid Connecting Link

013277768
60511579-1: RNCC: 3 | RNVC: 2
60511579-1: RNCC: 5 | RNVC: 9
60511579: RNCC: 5 | RNVC: 9

21 Oct 1990

3040-01-330-2206
Flexible Shaft Assembly

013302206
005352V166: RNCC: 3 | RNVC: 2
446900-1X-166: RNCC: 5 | RNVC: 9
005352V166: RNCC: 5 | RNVC: 9

30 Nov 1990

3040-01-331-4832
Shouldered Shaft

013314832
3825043-1: RNCC: 3 | RNVC: 2
3825043-1: RNCC: 5 | RNVC: 2
3825043-1: RNCC: 5 | RNVC: 2

20 Dec 1990

3040-01-332-6924
Shouldered Shaft

013326924
4W7995: RNCC: 3 | RNVC: 2
7W1282 IT 1: RNCC: 5 | RNVC: 2
3-349-045-463-BE: RNCC: 5 | RNVC: 2

15 Jan 1991

3040-01-333-8288
Electrical-Fluid Pressure Connector Assembly

013338288
A624-1327: RNCC: 3 | RNVC: 2

9 Feb 1991

3040-01-337-4167
Linear Actuating Cylinder Piston

013374167
23017262: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-337-4386
Rigid Connecting Link

013374386
75A327429-1001: RNCC: 3 | RNVC: 9
75A327429: RNCC: 5 | RNVC: 1
75A327429-1001: RNCC: 5 | RNVC: 2
75A327429-1001: RNCC: 5 | RNVC: 9
75A327429: RNCC: 5 | RNVC: 9
75A327429-1001: RNCC: 5 | RNVC: 9
75A327429-1001: RNCC: 5 | RNVC: 9
75A327429-1001: RNCC: 5 | RNVC: 9
75A327429: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-338-7601
Multiple Gears Gearshaft

013387601
1843600U: RNCC: 3 | RNVC: 2
1843600U: RNCC: 5 | RNVC: 9

10 May 1991

3040-01-338-9642
Shouldered Shaft Assembly

013389642
5008099: RNCC: 3 | RNVC: 2

14 May 1991

3040-01-338-4428
Shouldered Shaft

013384428
6532D757-1: RNCC: 3 | RNVC: 2
6532D757-1: RNCC: 5 | RNVC: 2
6532D757: RNCC: D | RNVC: 9

3 May 1991

3040-01-340-5905
Straight Shaft

013405905
9514175: RNCC: 3 | RNVC: 2
9514175: RNCC: 5 | RNVC: 9

17 Jun 1991

3040-01-340-6054
Bell Crank

013406054
A333017R: RNCC: 3 | RNVC: 2
A343024 IT 2: RNCC: 5 | RNVC: 2
A343024: RNCC: D | RNVC: 9

17 Jun 1991

3040-01-340-6059
Pawl

013406059
6532D343-3: RNCC: 3 | RNVC: 2
6532D343: RNCC: D | RNVC: 9

17 Jun 1991

3040-01-340-7105
Counterbalance Weight

013407105
2301019: RNCC: 3 | RNVC: 2
AS44522-050: RNCC: 5 | RNVC: 2
AS44522-050: RNCC: 5 | RNVC: 9
AS44522-050: RNCC: 5 | RNVC: 9
AS44522-050: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-340-7121
Manual Control Lever Assembly

013407121
8451739: RNCC: 3 | RNVC: 2
8451739: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-340-5914
Shouldered Shaft

013405914
70700-20130-131: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-341-0146
Counterbalance Weight

013410146
2301024: RNCC: 3 | RNVC: 9
AS44522-100: RNCC: 5 | RNVC: 2
AS44522-100: RNCC: 5 | RNVC: 9
AS44522-100: RNCC: 5 | RNVC: 9
AS44520THRU23: RNCC: 5 | RNVC: 9
AS44522-100: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-0189
Manual Control Lever

013410189
C-0907A: RNCC: 3 | RNVC: 2
16944 FIND NO. 16: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-342-0624
Shouldered Shaft

013420624
650-3714-00: RNCC: 3 | RNVC: 2
384-1675-00: RNCC: 5 | RNVC: 9

14 Jul 1991

3040-01-344-1893
Linear Actuating Cylinder Assembly

013441893
AHC12196: RNCC: 3 | RNVC: 2
AH150044: RNCC: 5 | RNVC: 9
RE27701: RNCC: 5 | RNVC: 9
AH15044: RNCC: 5 | RNVC: 9
RE27701: RNCC: 5 | RNVC: 9

24 Aug 1991

3040-01-344-1967
Nonrotating Shaft Eye Bracket

013441967
741719: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-344-5747
Shouldered Shaft

013445747
12376-G: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-345-3698
Counterbalance Weight

013453698
335-014-404-0: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-346-3239
Rigid Connecting Link

013463239
18-17999-000: RNCC: 3 | RNVC: 2
18-17999: RNCC: D | RNVC: 9

3 Oct 1991

3040-01-346-3241
Rigid Connecting Link

013463241
18-23504-001: RNCC: 3 | RNVC: 2
18-23504: RNCC: D | RNVC: 9

3 Oct 1991

3040-01-346-4191
Brake Disc

013464191
5A6-03520-1: RNCC: 3 | RNVC: 2
5A6-03520: RNCC: D | RNVC: 9

4 Oct 1991

3040-01-346-4428
Linear Actuating Cylinder Assembly

013464428
01.50-CKC2HT14ACX3.00: RNCC: 3 | RNVC: 2
D151-42-24S-7X3(SAEPORTS): RNCC: 5 | RNVC: 2
1.50CKC2HT14AC3.0: RNCC: 5 | RNVC: 9
D151-42H-14-7X3: RNCC: 5 | RNVC: 9

5 Oct 1991

3040-01-346-9818
Brake Shoe

013469818
M900742: RNCC: 3 | RNVC: 2
M900742: RNCC: 5 | RNVC: 9

12 Oct 1991

3040-01-346-9898
Linear Actuating Cylinder Assembly

013469898
30222-01: RNCC: 3 | RNVC: 9
1870-18: RNCC: 5 | RNVC: 9

12 Oct 1991

3040-01-347-7921
Breather

013477921
6310226-138: RNCC: 1 | RNVC: 2
WC-00394-41D5BVA: RNCC: 3 | RNVC: 2
WC-00394-41D5BVA: RNCC: 5 | RNVC: 2
WE-00394-41B: RNCC: 5 | RNVC: 9
6310226-138: RNCC: 5 | RNVC: 9

29 Oct 1991

3040-01-352-6069
Shouldered Shaft

013526069
G453236-1: RNCC: 3 | RNVC: 2
G453236-1: RNCC: 5 | RNVC: 2
G453236-1: RNCC: 5 | RNVC: 9

29 Jan 1992

3040-01-352-3838
Push-Pull Control Assembly

013523838
446900-1H-144: RNCC: 3 | RNVC: 2
HXOSH12BZ1: RNCC: 5 | RNVC: 2
1867930: RNCC: 5 | RNVC: 2
1867930: RNCC: 7 | RNVC: 9

25 Jan 1992

3040-01-352-3782
Shouldered Shaft

013523782
5198321: RNCC: 3 | RNVC: 2
1387212: RNCC: 5 | RNVC: 2
1387212: RNCC: 5 | RNVC: 9

25 Jan 1992

3040-01-352-4082
Bevel Gearshaft

013524082
9961M31G03: RNCC: 3 | RNVC: 2

25 Jan 1992

3040-01-353-8504
Straight Shaft

013538504
6-810-002274: RNCC: 3 | RNVC: 2
6-810-002274: RNCC: 5 | RNVC: 2
6-810-002274: RNCC: 5 | RNVC: 2
2HE983: RNCC: C | RNVC: 1

19 Feb 1992

3040-01-354-0570
Rigid Connecting Link

013540570
206667: RNCC: 3 | RNVC: 2
1245-U-437: RNCC: 5 | RNVC: 9
1245-U-437: RNCC: 5 | RNVC: 9
1245-U-437: RNCC: C | RNVC: 1

21 Feb 1992

3040-01-354-2757
Idler Assembly

013542757
17P6P9428-501: RNCC: 3 | RNVC: 2
17P6P9428-1: RNCC: 3 | RNVC: 9

26 Feb 1992

3040-01-354-9062
Straight Shaft

013549062
6-810-002159: RNCC: 3 | RNVC: 2
2HE949: RNCC: C | RNVC: 1

7 Mar 1992

3040-01-354-9077
Adapter Shaft Assembly

013549077
125328B-6: RNCC: 3 | RNVC: 2
DAA3272P016-123: RNCC: 5 | RNVC: 2

7 Mar 1992

3040-01-355-0559
Mechanical Drive Housing

013550559
2GK306: RNCC: 3 | RNVC: 2
21625-4: RNCC: 3 | RNVC: 2
21625-4: RNCC: 5 | RNVC: 9
2GK306: RNCC: 5 | RNVC: 9
21625-4: RNCC: 5 | RNVC: 9

11 Mar 1992

3040-01-355-0629
Rigid Connecting Link

013550629
ML7-22.31: RNCC: 3 | RNVC: 2
1728080: RNCC: 5 | RNVC: 2
1728080: RNCC: 5 | RNVC: 9
L1/3D3/3/22.3: RNCC: 5 | RNVC: 9

11 Mar 1992

3040-01-361-0649
Linear Actuating Cylinder

013610649
6965-TA: RNCC: 3 | RNVC: 2
8909A354-001: RNCC: 5 | RNVC: 2
8909A354-001: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-361-2505
Body Hub

013612505
2W7565: RNCC: 3 | RNVC: 2
2W7565: RNCC: 5 | RNVC: 2
2W7565: RNCC: 5 | RNVC: 2

11 Jul 1992

3040-01-355-9141
Multiple Gears Gearshaft

013559141
748965: RNCC: 3 | RNVC: 2

26 Mar 1992

3040-01-361-0760
Shaft Retaining Plate

013610760
29503046: RNCC: 3 | RNVC: 2
29503046: RNCC: 5 | RNVC: 2
29503046: RNCC: 5 | RNVC: 2

8 Jul 1992

3040-01-356-8671
Straight Shaft

013568671
25614: RNCC: 3 | RNVC: 2
230044: RNCC: 5 | RNVC: 2
25614: RNCC: 5 | RNVC: 2

12 Apr 1992

3040-01-356-2707
Linear Actuating Cylinder Assembly

013562707
150235B: RNCC: 3 | RNVC: 2
1860860: RNCC: 3 | RNVC: 2
150235B: RNCC: 5 | RNVC: 2
1860860: RNCC: 5 | RNVC: 9

1 Apr 1992

3040-01-357-4174
Flexible Drive Shaft

013574174
FSV-72: RNCC: 3 | RNVC: 2
12361834: RNCC: 5 | RNVC: 9
0312-15044-Y-010.00: RNCC: 5 | RNVC: 9
12361834: RNCC: 5 | RNVC: 9
12361834: RNCC: D | RNVC: 9

23 Apr 1992

3040-01-357-4533
Bell Crank

013574533
4079028: RNCC: 3 | RNVC: 2
4079028: RNCC: 5 | RNVC: 2
3040PL0669167: RNCC: 6 | RNVC: 9

23 Apr 1992

3040-01-363-5553
Mechanical Drive Housing

013635553
522R686G01: RNCC: 3 | RNVC: 2

1 Sep 1992

3040-01-364-5402
Linear Actuating Cylinder Assembly

013645402
B-WK-406-C-1-B: RNCC: 3 | RNVC: 2
B-WK-406-C-1-B ITEM 1: RNCC: 5 | RNVC: 9
B-WK-406-C-1-B: RNCC: 5 | RNVC: 9

22 Sep 1992

3040-01-359-8298
Straight Shaft

013598298
1220B1058: RNCC: 3 | RNVC: 2
1220B1058: RNCC: 5 | RNVC: 9

13 Jun 1992

3040-01-360-4448
Mechanical Drive Housing

013604448
16221: RNCC: 3 | RNVC: 2
5938679: RNCC: 5 | RNVC: 2

24 Jun 1992

3040-01-365-2925
Straight Shaft

013652925
MBEU145886: RNCC: 3 | RNVC: 2
MBEU145886: RNCC: 5 | RNVC: 2

5 Oct 1992

3040-01-366-0779
Push-Pull Control Assembly

013660779
12351252-3: RNCC: 3 | RNVC: 2
12351252-3: RNCC: 5 | RNVC: 2
12351252-3: RNCC: 5 | RNVC: 2
12351252: RNCC: D | RNVC: 9

21 Oct 1992

3040-01-366-9586
Linear Actuating Cylinder Assembly

013669586
CYSR5000HY84T2B-250-425-100-990: RNCC: 3 | RNVC: 9
89156912: RNCC: 5 | RNVC: 9

4 Nov 1992

3040-01-369-6635
Pawl

013696635
12524523: RNCC: 3 | RNVC: 2
465-4523: RNCC: 5 | RNVC: 2
465-4523: RNCC: 5 | RNVC: 9

31 Dec 1992

3040-01-370-1349
Straight Shaft

013701349
6-689-001008: RNCC: 3 | RNVC: 2
6-689-001008: RNCC: 5 | RNVC: 2
6-689-001008: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-316-0567
Counterbalance Weight

013160567
3755-7: RNCC: 3 | RNVC: 2
3755-7: RNCC: 5 | RNVC: 2

2 Mar 1990

3040-01-316-3261
Flexible Shaft Assembly

013163261
1858851: RNCC: 3 | RNVC: 2
1977616 ITEM 7: RNCC: 5 | RNVC: 2

8 Mar 1990

3040-01-316-6826
Shaft Idler

013166826
3-375-501-41G: RNCC: 3 | RNVC: 2

13 Mar 1990

3040-01-318-0847
Control Cam

013180847
056550: RNCC: 3 | RNVC: 2
933D056550: RNCC: 5 | RNVC: 9

12 Apr 1990

3040-01-319-0848
Shaft Retaining Plate

013190848
J-35652-B: RNCC: 3 | RNVC: 2
J35652: RNCC: 5 | RNVC: 9

1 May 1990

3040-01-319-3601
Worm Shaft

013193601
88054: RNCC: 3 | RNVC: 2
81036: RNCC: 5 | RNVC: 9
88054: RNCC: 5 | RNVC: 9

5 May 1990

3040-01-319-1256
Counterbalance Weight

013191256
4068999: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-6983
Rotating Shaft Eye Bracket

013196983
8929111: RNCC: 3 | RNVC: 2
DDE 08929111: RNCC: 5 | RNVC: 2

12 May 1990

3040-01-321-4542
Manual Control Lever

013214542
14971-5704-0: RNCC: 3 | RNVC: 9
14971-5704-1: RNCC: 5 | RNVC: 9
3040013214542: RNCC: 6 | RNVC: 9

19 Jun 1990

3040-01-321-5101
Rigid Connecting Link

013215101
4069547: RNCC: 3 | RNVC: 2
4069547: RNCC: 5 | RNVC: 2
3040PL0669009: RNCC: 6 | RNVC: 9

19 Jun 1990

3040-01-322-9029
Rigid Connecting Link

013229029
2W4628: RNCC: 3 | RNVC: 2
3740-035: RNCC: 5 | RNVC: 2

17 Jul 1990

3040-01-323-0000
Remote Control Lever

013230000
9501M95G02: RNCC: 3 | RNVC: 2

18 Jul 1990

3040-01-325-0171
Rigid Connecting Link

013250171
L3005970-001: RNCC: 3 | RNVC: 2
L3005970-001: RNCC: 5 | RNVC: 2

26 Aug 1990

3040-01-325-4131
Mechanical Drive Housing

013254131
4070028: RNCC: 3 | RNVC: 2
4070028: RNCC: 5 | RNVC: 2

4 Sep 1990

3040-01-326-7771
Rigid Connecting Link

013267771
12379346: RNCC: 3 | RNVC: 2

30 Sep 1990

3040-01-327-2763
Extension Shaft

013272763
22516: RNCC: 3 | RNVC: 2
22516: RNCC: 5 | RNVC: 1
25162: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-328-5573
Manual Control Lever

013285573
7135-75E: RNCC: 3 | RNVC: 2
3040PL0825520: RNCC: 6 | RNVC: 9

4 Nov 1990

3040-01-329-3052
Rigid Connecting Link

013293052
74T030352-1001: RNCC: 3 | RNVC: 2
74T030352-1001: RNCC: 5 | RNVC: 2
77T030352-1001: RNCC: 5 | RNVC: 2

15 Nov 1990

3040-01-329-7553
Rigid Connecting Link

013297553
12299025-9: RNCC: 3 | RNVC: 2
10386418: RNCC: 6 | RNVC: 9
12299025: RNCC: D | RNVC: 9

22 Nov 1990

3040-01-330-2491
Disk Brake Shoe

013302491
530007: RNCC: 3 | RNVC: 2
001554T: RNCC: 5 | RNVC: 2

30 Nov 1990

3040-01-331-4993
Remote Control Lever

013314993
7002752-2: RNCC: 3 | RNVC: 2
7002752-2: RNCC: 5 | RNVC: 2

20 Dec 1990

3040-01-331-6523
Linear Actuating Cylinder

013316523
VSM-5396: RNCC: 3 | RNVC: 2
03808722 VSM-5396: RNCC: 5 | RNVC: 2
03890423-01-VSM-5396: RNCC: 5 | RNVC: 9
VSM-5396: RNCC: C | RNVC: 1
03808722: RNCC: D | RNVC: 9

22 Dec 1990

3040-01-331-7117
Counterbalance Weight

013317117
1558M63P02: RNCC: 3 | RNVC: 2
1558M63P02: RNCC: C | RNVC: 1

23 Dec 1990

3040-01-332-3837
Shouldered Shaft

013323837
68A831329-2001: RNCC: 3 | RNVC: 2

10 Jan 1991

3040-01-332-0768
Control Cam

013320768
7002761-4: RNCC: 3 | RNVC: 2
7002761-4: RNCC: 5 | RNVC: 2
7002761-4: RNCC: 5 | RNVC: 9
7002761: RNCC: 5 | RNVC: 9

3 Jan 1991

3040-01-334-4764
Extension Shaft

013344764
9032757-01: RNCC: 3 | RNVC: 2

23 Feb 1991

3040-01-335-9851
Control Cam

013359851
12916762: RNCC: 3 | RNVC: 2

17 Mar 1991

3040-01-336-3656
Rigid Connecting Link

013363656
12916805: RNCC: 3 | RNVC: 2

24 Mar 1991

3040-01-334-7522
Shouldered Shaft

013347522
5N1913: RNCC: 3 | RNVC: 2
5N1923 IT 5: RNCC: 5 | RNVC: 2

27 Feb 1991

3040-01-337-4384
Rigid Connecting Link

013374384
75A327426-1001: RNCC: 3 | RNVC: 2
75A327426-1001: RNCC: 5 | RNVC: 2
75A327426-1001: RNCC: 5 | RNVC: 9
75A327426-1001: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-337-7575
Rigid Connecting Link

013377575
12913196: RNCC: 3 | RNVC: 2

21 Apr 1991

3040-01-337-4368
Nonrotating Shaft Eye Bracket

013374368
1 422 130 011: RNCC: 3 | RNVC: 2
1 422 130 011: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-339-1583
Shouldered Shaft

013391583
762817: RNCC: 3 | RNVC: 2
751608: RNCC: 5 | RNVC: 9

17 May 1991

3040-01-339-5516
Rigid Connecting Link

013395516
324685: RNCC: 3 | RNVC: 2
324685: RNCC: 5 | RNVC: 9

23 May 1991

3040-01-339-3669
Bell Crank

013393669
510212G2: RNCC: 3 | RNVC: 2
510212G2: RNCC: 5 | RNVC: 9
510212: RNCC: D | RNVC: 9

21 May 1991

3040-01-341-2399
Counterbalance Weight

013412399
AS44520-020: RNCC: 3 | RNVC: 2
AS44520-020: RNCC: 5 | RNVC: 2
AS44520-020: RNCC: 5 | RNVC: 9
AS44520-020: RNCC: 5 | RNVC: 9
AS44520-020: RNCC: 5 | RNVC: 9

26 Jun 1991

3040-01-341-4994
Linear Actuating Cylinder Assembly Parts Kit

013414994
RK2AHL0255: RNCC: 3 | RNVC: 2

1 Jul 1991

3040-01-342-6815
Counterbalance Weight

013426815
2301005: RNCC: 3 | RNVC: 9
AS44520-050: RNCC: 5 | RNVC: 2
AS44520-050: RNCC: 5 | RNVC: 9
AS44520-050: RNCC: 5 | RNVC: 9
AS44520-050: RNCC: 5 | RNVC: 9
AS44520-050: RNCC: 5 | RNVC: 9
AS44520-050: RNCC: C | RNVC: 1

29 Jul 1991

3040-01-344-1971
Pawl

013441971
116289-2: RNCC: 3 | RNVC: 2
116289: RNCC: D | RNVC: 9

24 Aug 1991

3040-01-344-1980
Rigid Connecting Link

013441980
68A733037-2007: RNCC: 3 | RNVC: 2
68A733037-2005: RNCC: 3 | RNVC: 2
68A733037-2005: RNCC: 5 | RNVC: 2
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037-2005: RNCC: 5 | RNVC: 9
68A733037: RNCC: D | RNVC: 9

24 Aug 1991

3040-01-344-6397
Straight Shaft

013446397
12925: RNCC: 3 | RNVC: 2
11KP437: RNCC: 5 | RNVC: 2
12925-G: RNCC: 5 | RNVC: 9
11KP437: RNCC: 5 | RNVC: 9

4 Sep 1991

3040-01-345-5699
Shouldered Shaft

013455699
803-5773913 PC 17: RNCC: 3 | RNVC: 2
803-5184146 PC 40: RNCC: 3 | RNVC: 2
803-5184144 PC 20: RNCC: 5 | RNVC: 2
803-5184146 PIE: RNCC: C | RNVC: 1
803-5773913: RNCC: D | RNVC: 9
803-5184146: RNCC: D | RNVC: 9

21 Sep 1991

3040-01-346-1761
Shouldered Shaft

013461761
SA75450508: RNCC: 3 | RNVC: 2
2GK536: RNCC: 5 | RNVC: 2
2GK536: RNCC: 5 | RNVC: 9

28 Sep 1991

3040-01-346-1969
Bell Crank

013461969
KG11493: RNCC: 3 | RNVC: 2
C-160A: RNCC: 5 | RNVC: 2

28 Sep 1991

3040-01-347-2893
Pawl

013472893
5C1-02052: RNCC: 3 | RNVC: 2

19 Oct 1991

3040-01-347-2888
Rotating Shaft Eye Bracket

013472888
12370810: RNCC: 3 | RNVC: 2

19 Oct 1991

3040-01-348-4523
Spur Gearshaft

013484523
6211-700Z: RNCC: 3 | RNVC: 2
3040PL0813124: RNCC: 6 | RNVC: 9

9 Nov 1991

3040-01-347-8691
Piston Rod Guide

013478691
CEC-4-5222: RNCC: 3 | RNVC: 2
41-030: RNCC: 5 | RNVC: 2

30 Oct 1991

3040-01-348-5700
Piston Rod Guide

013485700
784704-1: RNCC: 3 | RNVC: 2
784704: RNCC: D | RNVC: 9

13 Nov 1991

3040-01-348-8023
Shouldered Shaft

013488023
11-39MIL1-2006-16: RNCC: 3 | RNVC: 9
11-39MIL1-2006-15: RNCC: 5 | RNVC: 2
5-227 ITEM 15 11-39MIL1-2006: RNCC: 5 | RNVC: 2
11-39MIL1-2006-15: RNCC: 5 | RNVC: 9
5-227: RNCC: D | RNVC: 9

16 Nov 1991

3040-01-346-4006
Straight Shaft

013464006
8751: RNCC: 3 | RNVC: 9
8751: RNCC: 5 | RNVC: 2
8751: RNCC: C | RNVC: 1

4 Oct 1991

3040-01-349-6927
Inertia Damper

013496927
12479785: RNCC: 1 | RNVC: 2
12426: RNCC: 3 | RNVC: 2
1242600: RNCC: 5 | RNVC: 2
12426: RNCC: 5 | RNVC: 9
12426: RNCC: 5 | RNVC: 9
12426: RNCC: 5 | RNVC: 9
1242600: RNCC: 5 | RNVC: 9
1242600: RNCC: 5 | RNVC: 9

2 Dec 1991

3040-01-351-6031
Rigid Connecting Link

013516031
B509144: RNCC: 3 | RNVC: 2
B509144: RNCC: 5 | RNVC: 2
B509144: RNCC: 5 | RNVC: 9

11 Jan 1992

3040-01-352-0013
Straight Shaft

013520013
3152728: RNCC: 3 | RNVC: 2
783240: RNCC: 5 | RNVC: 2
783240: RNCC: 5 | RNVC: 9

17 Jan 1992

3040-01-351-6576
Gearbox Swage Ring

013516576
42312C105: RNCC: 3 | RNVC: 2

14 Jan 1992

3040-01-354-2760
Lock Spindle Assembly

013542760
17P2G5050-503: RNCC: 3 | RNVC: 9
17P2G5050-503: RNCC: 5 | RNVC: 2

26 Feb 1992

3040-01-355-7585
Linear Actuating Cylinder Assembly Parts Kit

013557585
34416: RNCC: 3 | RNVC: 2

23 Mar 1992

3040-01-360-9229
Shouldered Shaft

013609229
5-4-4735: RNCC: 3 | RNVC: 2

4 Jul 1992

3040-01-361-3279
Linear Actuating Cylinder

013613279
1-1/8HHSL4CCVY: RNCC: 3 | RNVC: 2
1-1/SHHSL4CCVY: RNCC: 5 | RNVC: 9
1-1/8HH-A009A: RNCC: 5 | RNVC: 9
SER NO. 1009369: RNCC: 5 | RNVC: 9
1 1/8HHSL4CCAKY: RNCC: 5 | RNVC: 9
1009369-1 1/8HH-A009: RNCC: 5 | RNVC: 9
1 1-8HHSL4CCAKY: RNCC: 5 | RNVC: 9

14 Jul 1992

3040-01-361-8305
Rigid Connecting Link

013618305
835028A0888: RNCC: 3 | RNVC: 2
835028A0888: RNCC: 5 | RNVC: 2
L835028A0888: RNCC: 5 | RNVC: 9

26 Jul 1992

3040-01-362-1951
Push-Pull Control Assembly

013621951
29507766: RNCC: 3 | RNVC: 2
80036760: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 9
10046147: RNCC: 6 | RNVC: 9

1 Aug 1992

3040-01-361-4963
Brake Disc

013614963
56P40-1600: RNCC: 3 | RNVC: 2
56P40-11 REF 15: RNCC: 5 | RNVC: 2
56P040-1600: RNCC: 5 | RNVC: 2

17 Jul 1992

3040-01-362-7089
Remote Control Lever

013627089
4413-606: RNCC: 3 | RNVC: 2

14 Aug 1992

3040-01-359-8371
Linear Actuating Cylinder Assembly

013598371
S10003408DLAZ: RNCC: 3 | RNVC: 2
8801-009: RNCC: 5 | RNVC: 9
SW24768: RNCC: 7 | RNVC: 2

13 Jun 1992

3040-01-360-4719
Pawl Peg Cushion

013604719
0480B0180: RNCC: 3 | RNVC: 2
0480B0180: RNCC: 5 | RNVC: 9

24 Jun 1992

3040-01-360-6513
Body Hub

013606513
738.06.034.03: RNCC: 3 | RNVC: 2
11206.081.01: RNCC: 5 | RNVC: 2

28 Jun 1992

3040-01-360-6019
Mechanical Drive Housing

013606019
29501360: RNCC: 3 | RNVC: 2
29501360: RNCC: 5 | RNVC: 2
29501360: RNCC: 5 | RNVC: 2
29501360: RNCC: 5 | RNVC: 9
29501360: RNCC: C | RNVC: 1
029122T: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-364-5399
Linear Actuating Cylinder Assembly

013645399
89156909: RNCC: 3 | RNVC: 2
89156909: RNCC: 3 | RNVC: 9
CYSR5000HY84T2B-250-600-100-990: RNCC: 5 | RNVC: 2
CYSR5000HY84T2B-250-600-100-990: RNCC: 5 | RNVC: 9

22 Sep 1992

3040-01-364-6148
Counterbalance Weight

013646148
406-015-106-101: RNCC: 3 | RNVC: 2
406-015-106: RNCC: D | RNVC: 9

22 Sep 1992

3040-01-364-8769
Breather

013648769
PBB-10-5-N: RNCC: 3 | RNVC: 2
PL-2043B-001 ITEM 16: RNCC: 5 | RNVC: 2
6KP107: RNCC: C | RNVC: 1
5257-040: RNCC: C | RNVC: 1
PL-2043B-001: RNCC: D | RNVC: 9

27 Sep 1992

3040-01-364-8894
Rigid Connecting Link

013648894
MBEU147771: RNCC: 3 | RNVC: 2
MBEU147771: RNCC: 5 | RNVC: 2
MBEU147771: RNCC: 5 | RNVC: 2
MBEU147771: RNCC: 5 | RNVC: 9
10107277: RNCC: 6 | RNVC: 9

27 Sep 1992

3040-01-365-9150
Shouldered Shaft

013659150
MBEU145907: RNCC: 3 | RNVC: 2
MBEU145907: RNCC: 5 | RNVC: 2

19 Oct 1992

3040-01-366-7276
Linear Actuating Cylinder

013667276
518-4457086 PART 54: RNCC: 3 | RNVC: 2
518-4457086: RNCC: D | RNVC: 9

1 Nov 1992

3040-01-368-2112
Linear Actuating Cylinder Assembly

013682112
1H2H0A00272957: RNCC: 3 | RNVC: 2
H74/62T2B-150-7700-63-S44-9: RNCC: 3 | RNVC: 9
CYSR2480HY74T2B-150-7700-63-990: RNCC: 5 | RNVC: 9
89156913: RNCC: 5 | RNVC: 9
H74/62T2B-150-7700-63-S44-9: RNCC: 5 | RNVC: 9

27 Nov 1992

3040-01-368-7602
Shouldered Shaft

013687602
5497642-1: RNCC: 3 | RNVC: 2
5497642-1: RNCC: 5 | RNVC: 2
5497642-1: RNCC: 5 | RNVC: 9
5497642: RNCC: D | RNVC: 9

8 Dec 1992

3040-01-369-7710
Linear Actuating Cylinder Assembly

013697710
CUS8707-C016: RNCC: 3 | RNVC: 2
89156939: RNCC: 5 | RNVC: 2
89156939: RNCC: 5 | RNVC: 9

6 Jan 1993

3040-01-369-6851
Bevel Gearshaft

013696851
68788: RNCC: 3 | RNVC: 2
68788: RNCC: 5 | RNVC: 1

1 Jan 1993

3040-01-370-0195
Shaft Collar

013700195
735-80008-0: RNCC: 3 | RNVC: 2
SYQ5300: RNCC: 5 | RNVC: 2
735-80008: RNCC: 5 | RNVC: 2

11 Jan 1993

3040-01-356-8624
Rotating Shaft Eye Bracket

013568624
5760569: RNCC: 3 | RNVC: 2

12 Apr 1992

3040-01-357-1227
Control Cam

013571227
4100206-3: RNCC: 3 | RNVC: 2
4100206-3: RNCC: 5 | RNVC: 2
C61732-001: RNCC: 5 | RNVC: 9
4100206-3: RNCC: 5 | RNVC: 9
C61732-001: RNCC: 5 | RNVC: 9
41000206-3: RNCC: 5 | RNVC: 9
10163073: RNCC: 6 | RNVC: 9
4100206-3: RNCC: C | RNVC: 1

16 Apr 1992

3040-01-357-5677
Straight Shaft

013575677
226490: RNCC: 3 | RNVC: 2
24461: RNCC: 5 | RNVC: 2

26 Apr 1992

3040-01-357-7669
Extension Shaft

013577669
7010-SS-20: RNCC: 3 | RNVC: 2
53X-00-0019: RNCC: 5 | RNVC: 9
53X-00-0019: RNCC: C | RNVC: 1

30 Apr 1992

3040-01-363-2478
Spur Gearshaft

013632478
3860416-1: RNCC: 3 | RNVC: 2
3860416: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-3766
Spline Adapter

013633766
3860791-1: RNCC: 3 | RNVC: 2

28 Aug 1992

3040-01-363-8114
Linear Actuating Cylinder

013638114
6962-HR: RNCC: 3 | RNVC: 2
8909A351-001: RNCC: 5 | RNVC: 2
8909A351-001: RNCC: 5 | RNVC: 9

6 Sep 1992

3040-01-364-4603
Rigid Connecting Link

013644603
17P2D4004-501: RNCC: 3 | RNVC: 2
17P2D4004-1: RNCC: 5 | RNVC: 9

19 Sep 1992

3040-01-316-0634
Linear Actuating Cylinder Assembly

013160634
204087: RNCC: 3 | RNVC: 2
204087: RNCC: 5 | RNVC: 2
1589AS604-1: RNCC: 5 | RNVC: 9
600-1786: RNCC: 5 | RNVC: 9
600-1786: RNCC: 5 | RNVC: 9

2 Mar 1990

3040-01-315-8215
Differential Gear Unit

013158215
83809: RNCC: 3 | RNVC: 2
16760AC ITEM 9: RNCC: 5 | RNVC: 9
83687 ITEM 9: RNCC: C | RNVC: 1

23 Feb 1990

3040-01-316-3074
Hub Clamp

013163074
1808814-2: RNCC: 3 | RNVC: 2
1977616 ITEM 29: RNCC: 5 | RNVC: 2
1977616: RNCC: D | RNVC: 9

8 Mar 1990

3040-01-316-3557
Rigid Connecting Link

013163557
65396-06032-101: RNCC: 3 | RNVC: 2

8 Mar 1990

3040-01-317-0368
Remote Control Lever

013170368
28937: RNCC: 3 | RNVC: 2

22 Mar 1990

3040-01-317-5424
Remote Control Lever

013175424
5362-542: RNCC: 3 | RNVC: 2
5362-542: RNCC: 5 | RNVC: 2
5362-542: RNCC: 5 | RNVC: 2

31 Mar 1990

3040-01-317-8862
Control Cam

013178862
BAH-153: RNCC: 3 | RNVC: 2
225329-01: RNCC: 5 | RNVC: 2

8 Apr 1990

3040-01-319-9504
Control Cam

013199504
2676564: RNCC: 3 | RNVC: 2

17 May 1990

3040-01-320-3802
Linear Actuating Cylinder Assembly

013203802
2Q7590: RNCC: 3 | RNVC: 2
537495: RNCC: 5 | RNVC: 9
0537495: RNCC: 5 | RNVC: 9

24 May 1990

3040-01-320-1528
Spur Gearshaft

013201528
2111007-213: RNCC: 3 | RNVC: 2

19 May 1990

3040-01-322-4606
Manual Control Lever

013224606
2207173: RNCC: 3 | RNVC: 2
7N5378: RNCC: 5 | RNVC: 9

6 Jul 1990

3040-01-323-3262
Shouldered Shaft

013233262
13265270: RNCC: 3 | RNVC: 2

26 Jul 1990

3040-01-323-3292
Bell Crank

013233292
6826942: RNCC: 3 | RNVC: 2
6826942: RNCC: 5 | RNVC: 9

26 Jul 1990

3040-01-323-9838
Remote Control Lever

013239838
3825093-3: RNCC: 3 | RNVC: 2
3825093-3: RNCC: 5 | RNVC: 2
3825093-3: RNCC: 5 | RNVC: 2
10107023: RNCC: 6 | RNVC: 9
3825093: RNCC: D | RNVC: 9

7 Aug 1990

3040-01-324-1979
Bell Crank

013241979
9997M75G06: RNCC: 3 | RNVC: 2

11 Aug 1990

3040-01-325-2146
Control Cam

013252146
3035-380: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-325-7874
Bell Crank Support

013257874
70400-08163-043: RNCC: 3 | RNVC: 2
70400-08163-102-044-043: RNCC: 5 | RNVC: 2
70400-08163-043: RNCC: 5 | RNVC: 2

11 Sep 1990

3040-01-326-0871
Linear Actuating Cylinder Assembly

013260871
MS2-3A-CC-6.00-37.75-HIM1A: RNCC: 3 | RNVC: 2
MS2-3A-CC-6.00-37.75-HIM1A: RNCC: 3 | RNVC: 9
MS2-3A-CC-6.00: RNCC: 5 | RNVC: 9

18 Sep 1990

3040-01-325-6341
Rigid Connecting Link

013256341
4F23660-137A: RNCC: 3 | RNVC: 2

7 Sep 1990

3040-01-328-0214
Drive Tightener

013280214
FATQ & N4 TIGHTENER SHAFT: RNCC: 3 | RNVC: 2
FATQ: RNCC: 5 | RNVC: 9
500K0835: RNCC: 5 | RNVC: 9
FATQ-N4: RNCC: 5 | RNVC: 9

26 Oct 1990

3040-01-327-8578
Detent Plate

013278578
3-3006-07: RNCC: 3 | RNVC: 2
3-3006-07: RNCC: 5 | RNVC: 9
3-3006-07: RNCC: 5 | RNVC: 9

23 Oct 1990

3040-01-329-1320
Piston Rod Ring

013291320
R81776: RNCC: 3 | RNVC: 2
R81776: RNCC: 5 | RNVC: 2
R81776: RNCC: 5 | RNVC: 2

11 Nov 1990

3040-01-329-4922
Control Cam

013294922
104B8208-1: RNCC: 3 | RNVC: 2
104B8208-1: RNCC: C | RNVC: 1

18 Nov 1990

3040-01-330-6125
Nonrotating Shaft Eye Bracket

013306125
110973: RNCC: 3 | RNVC: 2
219034 FIND 26: RNCC: 5 | RNVC: 2

5 Dec 1990

3040-01-330-6071
Multiple Gears Gearshaft

013306071
312-2920-230: RNCC: 3 | RNVC: 2
321-2920-230: RNCC: 5 | RNVC: 9

5 Dec 1990

3040-01-331-4836
Shouldered Shaft

013314836
3825056-1: RNCC: 3 | RNVC: 2
3825056-1: RNCC: 5 | RNVC: 2
3825056-1: RNCC: 5 | RNVC: 9
10107028: RNCC: 6 | RNVC: 9

20 Dec 1990

3040-01-332-0076
Linear Actuating Cylinder Assembly Parts Kit

013320076
AH212091: RNCC: 3 | RNVC: 2
AH149842: RNCC: 3 | RNVC: 9
AH212091: RNCC: 5 | RNVC: 2
AH212091: RNCC: 5 | RNVC: 2
RE31138: RNCC: 5 | RNVC: 9

31 Dec 1990

3040-01-332-4268
Rigid Connecting Link

013324268
2666911: RNCC: 3 | RNVC: 2
10107033: RNCC: 6 | RNVC: 9

11 Jan 1991

3040-01-332-0767
Control Cam

013320767
7002761-3: RNCC: 3 | RNVC: 2
7002761-3: RNCC: 5 | RNVC: 2
10107031: RNCC: 6 | RNVC: 9

3 Jan 1991

3040-01-337-5570
Shouldered Shaft

013375570
4684676: RNCC: 3 | RNVC: 2
4684676: RNCC: 5 | RNVC: 2
80064-4684676: RNCC: C | RNVC: 1

17 Apr 1991

3040-01-338-0545
Manual Control Lever

013380545
39200: RNCC: 3 | RNVC: 2
335553: RNCC: 5 | RNVC: 2
335553: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-01-338-0606
Push-Pull Control Assembly

013380606
1302129: RNCC: 3 | RNVC: 2
1302129: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-01-338-2364
Manual Control Lever

013382364
1312735: RNCC: 3 | RNVC: 2
1312735: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-3037
Rigid Connecting Link

013383037
70209-82507-042: RNCC: 3 | RNVC: 2

30 Apr 1991

3040-01-338-4430
Shouldered Shaft

013384430
167C2972: RNCC: 3 | RNVC: 2

3 May 1991

3040-01-337-4146
Control Cam

013374146
8928511: RNCC: 3 | RNVC: 2
2GH664: RNCC: 5 | RNVC: 2
2GH664: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-338-4767
Rigid Connecting Link

013384767
12916808: RNCC: 3 | RNVC: 2

4 May 1991

3040-01-338-6050
Flexible Drive Shaft

013386050
3502701-4: RNCC: 3 | RNVC: 2
3502701-4 ITEM 6: RNCC: 5 | RNVC: 9
3505607 PC 69: RNCC: 5 | RNVC: 9
3502701: RNCC: D | RNVC: 9
3505607: RNCC: D | RNVC: 9

7 May 1991

3040-01-339-0156
Piston Ring

013390156
A-9601-J: RNCC: 3 | RNVC: 2
0-9601 AND 0-9602 ITEM 9: RNCC: 5 | RNVC: 9
0-9601: RNCC: D | RNVC: 9
0-9602: RNCC: D | RNVC: 9

14 May 1991

NSN 3040-01-339-0510 013390510 CYLINDER ASSEMBLY,ACTUATING,LINEAR

3040-01-339-0510
Linear Actuating Cylinder Assembly

013390510
R59: RNCC: 3 | RNVC: 2
RC59: RNCC: 5 | RNVC: 9
RC-59: RNCC: 5 | RNVC: 9
HSR-59T: RNCC: 5 | RNVC: 9
12913203: RNCC: 5 | RNVC: 9

15 May 1991

3040-01-339-6168
Shouldered Shaft

013396168
68A830863-2003: RNCC: 3 | RNVC: 2

24 May 1991

3040-01-340-5607
Shouldered Shaft

013405607
M61526-2: RNCC: 3 | RNVC: 2
M81749 ITEM 5: RNCC: 5 | RNVC: 2

17 Jun 1991

3040-01-341-0116
Linear Actuating Cylinder Assembly Parts Kit

013410116
L070740001: RNCC: 3 | RNVC: 2

23 Jun 1991

3040-01-341-0114
Linear Actuating Cylinder Assembly Parts Kit

013410114
L070740002: RNCC: 3 | RNVC: 2

23 Jun 1991

3040-01-341-0139
Counterbalance Weight

013410139
AS44522-015: RNCC: 3 | RNVC: 2
AS44522-015: RNCC: 5 | RNVC: 2
AS44522-015: RNCC: 5 | RNVC: 9
AS44522-015: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-4659
Transfer Drive Clutch Shaft

013414659
507187: RNCC: 3 | RNVC: 2
TM5114CA5-PG15 PC 18: RNCC: 5 | RNVC: 9
507187: RNCC: 5 | RNVC: 9

1 Jul 1991

3040-01-341-6588
Linear Actuating Cylinder Assembly Parts Kit

013416588
L070750003: RNCC: 3 | RNVC: 2

5 Jul 1991

3040-01-343-0663
Linear Actuating Cylinder Assembly

013430663
AH142932: RNCC: 3 | RNVC: 2
AH142932: RNCC: 5 | RNVC: 9
AH136053: RNCC: 5 | RNVC: 9
AH136053: RNCC: 5 | RNVC: 9

4 Aug 1991

3040-01-344-6398
Shouldered Shaft

013446398
6547C032-1: RNCC: 3 | RNVC: 2

4 Sep 1991

3040-01-345-1124
Mechanical Drive Housing

013451124
0223-00210: RNCC: 3 | RNVC: 2
6HA174: RNCC: 5 | RNVC: 2
02-23-00210-022: RNCC: 5 | RNVC: 9
6HA174: RNCC: 5 | RNVC: 9
2FP82: RNCC: C | RNVC: 1
05-71-00764: RNCC: D | RNVC: 9

12 Sep 1991

3040-01-345-3696
Counterbalance Weight

013453696
335-014-401-0: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-346-0870
Linear Actuating Cylinder Assembly

013460870
SC-192-2: RNCC: 3 | RNVC: 2
SC-192-2: RNCC: 5 | RNVC: 9

26 Sep 1991

3040-01-344-1975
Rigid Connecting Link

013441975
419 551 76 55: RNCC: 3 | RNVC: 2
519 551 7655: RNCC: 5 | RNVC: 2
519 551 7655: RNCC: 5 | RNVC: 9

24 Aug 1991

3040-01-347-9470
Remote Control Lever

013479470
555190-4: RNCC: 3 | RNVC: 2
555190-4: RNCC: 5 | RNVC: 9

1 Nov 1991

3040-01-348-2200
Piston Rod Guide

013482200
780016-1: RNCC: 3 | RNVC: 2
780016: RNCC: 5 | RNVC: 2

6 Nov 1991

3040-01-344-1850
Controllable Swashplate

013441850
741721: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-351-4016
Shouldered Shaft

013514016
033-71572: RNCC: 3 | RNVC: 2

8 Jan 1992

3040-01-351-5958
Control Cable Assembly

013515958
CC33210P: RNCC: 3 | RNVC: 2
32377-003-120IN: RNCC: 3 | RNVC: 9
5104949 ITEM 23: RNCC: 5 | RNVC: 2
032377-03-120.0: RNCC: 5 | RNVC: 9
5104949: RNCC: D | RNVC: 9

11 Jan 1992

3040-01-350-6314
Shouldered Shaft

013506314
744268-2: RNCC: 3 | RNVC: 2
B-1B: RNCC: 5 | RNVC: 2
744268-2: RNCC: 5 | RNVC: 2
744268: RNCC: D | RNVC: 9

19 Dec 1991

3040-01-352-2344
Housing Adapter

013522344
CS1C45AXA: RNCC: 3 | RNVC: 9
15556A: RNCC: 5 | RNVC: 9
CS1C45C: RNCC: 5 | RNVC: 9

23 Jan 1992

3040-01-353-0259
Shouldered Shaft Assembly

013530259
40A2218: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-353-5911
Vernier Control Head

013535911
317310: RNCC: 3 | RNVC: 2
307941-003: RNCC: 5 | RNVC: 9
307941-003: RNCC: 5 | RNVC: 9
307941-003: RNCC: 5 | RNVC: 9

13 Feb 1992

3040-01-353-7532
Manual Control Lever

013537532
206562: RNCC: 3 | RNVC: 2
A-2247-G-111: RNCC: 5 | RNVC: 2
A-2247-G-111: RNCC: 5 | RNVC: 9
A-2247-G-111: RNCC: C | RNVC: 1

15 Feb 1992

3040-01-359-8464
Rigid Connecting Link

013598464
1873060 W: RNCC: 3 | RNVC: 2
1873060 W: RNCC: 5 | RNVC: 9

13 Jun 1992

3040-01-360-6516
Remote Control Lever

013606516
734.04.021.03: RNCC: 3 | RNVC: 2
734.04.021.03: RNCC: 5 | RNVC: 9

28 Jun 1992

3040-01-363-8153
Vehicular Universal Joint

013638153
A2-3202-A-9621: RNCC: 3 | RNVC: 2
A2-3202-A-9621: RNCC: 5 | RNVC: 2
A2-3202-A-9621: RNCC: 5 | RNVC: 2

6 Sep 1992

3040-01-364-8892
Rigid Connecting Link

013648892
MBEU145913: RNCC: 3 | RNVC: 2
MBEU145913: RNCC: 5 | RNVC: 2
MBEU145913: RNCC: 5 | RNVC: 2

27 Sep 1992

3040-01-366-0283
Control Cam

013660283
437C161-2: RNCC: 3 | RNVC: 2
437C161-2: RNCC: 5 | RNVC: 9
437C161: RNCC: D | RNVC: 9

19 Oct 1992

3040-01-367-2179
Body Hub

013672179
037-54322-0: RNCC: 3 | RNVC: 2
037-54322: RNCC: 5 | RNVC: 9
M27-01412 PIECE 5: RNCC: 5 | RNVC: 9
M27-01412: RNCC: D | RNVC: 9

9 Nov 1992

3040-01-368-1315
Shouldered Shaft

013681315
DAA7271D058-001: RNCC: 3 | RNVC: 2

26 Nov 1992

3040-01-368-0053
Counterbalance Weight

013680053
L6314024-003: RNCC: 3 | RNVC: 2

23 Nov 1992

3040-01-368-6568
Linear Actuating Cylinder Assembly

013686568
1HHV0A00251005: RNCC: 3 | RNVC: 2
89156940: RNCC: 5 | RNVC: 9
CYSR5000HY84T2R-400-6238-175-990: RNCC: 5 | RNVC: 9

5 Dec 1992

3040-01-368-7706
Rigid Connecting Link

013687706
196389-A: RNCC: 3 | RNVC: 2

8 Dec 1992

3040-01-369-5349
Rigid Connecting Link

013695349
2111007-133: RNCC: 3 | RNVC: 2

24 Dec 1992

3040-01-369-7711
Linear Actuating Cylinder Assembly

013697711
89156936: RNCC: 3 | RNVC: 2
CYSR 5000 HY-84T2B-200-631100990: RNCC: 3 | RNVC: 9
89156936: RNCC: 5 | RNVC: 9

6 Jan 1993

3040-01-332-7046
Rigid Connecting Link

013327046
68A413015-1001: RNCC: 3 | RNVC: 2

15 Jan 1991

3040-01-333-2998
Remote Control Lever

013332998
UN0141: RNCC: 3 | RNVC: 2
701-149728-58: RNCC: 5 | RNVC: 9
701-149728-58: RNCC: C | RNVC: 1
701-149728-58: RNCC: C | RNVC: 1

30 Jan 1991

3040-01-333-1926
Linear Actuating Cylinder Assembly Parts Kit

013331926
A-8693: RNCC: 3 | RNVC: 2
74001262: RNCC: 5 | RNVC: 9

26 Jan 1991

3040-01-336-8295
Rigid Connecting Link

013368295
F270486: RNCC: 3 | RNVC: 2
F270486: RNCC: 5 | RNVC: 2
F270486: RNCC: 5 | RNVC: 9
F270486: RNCC: 5 | RNVC: 9

3 Apr 1991

3040-01-337-4160
Mechanical Drive Housing

013374160
10400237241: RNCC: 3 | RNVC: 9
H+B 50290520: RNCC: 5 | RNVC: 2
10400237241: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-316-0564
Counterbalance Weight

013160564
3755-4: RNCC: 3 | RNVC: 2
3755-4: RNCC: 5 | RNVC: 2
3040PL0928071: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-3073
Shaft Collar

013163073
1858784-7: RNCC: 3 | RNVC: 2
1977616 ITEM 25: RNCC: 5 | RNVC: 2
1977616: RNCC: D | RNVC: 9

8 Mar 1990

3040-01-317-0717
Straight Shaft

013170717
91742: RNCC: 3 | RNVC: 9
L696/27 ITEM-71: RNCC: 5 | RNVC: 9
L698/25: RNCC: 5 | RNVC: 9
91841: RNCC: 5 | RNVC: 9
091742 BE: RNCC: 5 | RNVC: 9
91841: RNCC: 5 | RNVC: 9
L696/27 ITEM-71: RNCC: 5 | RNVC: 9
L698/25: RNCC: 5 | RNVC: 9

22 Mar 1990

3040-01-317-3913
Shouldered Shaft

013173913
42498-1: RNCC: 3 | RNVC: 2
42498-1: RNCC: 5 | RNVC: 9

29 Mar 1990

3040-01-318-2958
Shaft Retaining Plate

013182958
9380511: RNCC: 3 | RNVC: 2

14 Apr 1990

3040-01-318-2705
Linear Actuating Cylinder Assembly Parts Kit

013182705
1501413: RNCC: 3 | RNVC: 2
360299: RNCC: 5 | RNVC: 2
360299: RNCC: 5 | RNVC: 9
360299: RNCC: 5 | RNVC: 9

14 Apr 1990

3040-01-319-0799
Mechanical Drive Housing

013190799
8350941: RNCC: 3 | RNVC: 2

1 May 1990

3040-01-319-4343
Breather

013194343
DC125B: RNCC: 3 | RNVC: 2

8 May 1990

3040-01-320-2729
Rigid Connecting Link

013202729
12576928: RNCC: 3 | RNVC: 2
A-502: RNCC: 5 | RNVC: 2
12576928: RNCC: 5 | RNVC: 9
A-502: RNCC: 5 | RNVC: 9
A-502: RNCC: 5 | RNVC: 9

23 May 1990

3040-01-320-4714
Rigid Connecting Link

013204714
4071197-01: RNCC: 3 | RNVC: 2
4071197-01: RNCC: 5 | RNVC: 2
3040PL0668578: RNCC: 6 | RNVC: 9

25 May 1990

3040-01-320-5458
Linear Actuating Cylinder Assembly

013205458
PMC-5612: RNCC: 3 | RNVC: 2

26 May 1990

3040-01-320-8770
Rigid Connecting Link

013208770
4075583-01: RNCC: 3 | RNVC: 2
4075583-01: RNCC: 5 | RNVC: 2
3040PL0668829: RNCC: 6 | RNVC: 9

5 Jun 1990

3040-01-320-0204
Remote Control Lever

013200204
12346175: RNCC: 3 | RNVC: 2

18 May 1990

3040-01-320-9425
Shouldered Shaft

013209425
856A4055P80: RNCC: 3 | RNVC: 2
856A4055P80: RNCC: 3 | RNVC: 9

6 Jun 1990

3040-01-321-3743
Shouldered Shaft Assembly

013213743
12553811: RNCC: 3 | RNVC: 2

16 Jun 1990

3040-01-321-9845
Straight Shaft

013219845
919C741-01: RNCC: 3 | RNVC: 2
919C741-01: RNCC: 5 | RNVC: 9
919C741: RNCC: C | RNVC: 1
919C741: RNCC: C | RNVC: 1
917C741: RNCC: C | RNVC: 1

27 Jun 1990

3040-01-322-0684
Rigid Connecting Link

013220684
16P1103-803: RNCC: 3 | RNVC: 2
16P1103-803: RNCC: 5 | RNVC: 2
16P1103-803: RNCC: 5 | RNVC: 2
16P1103-803: RNCC: 5 | RNVC: 2
3040PL0669132: RNCC: 6 | RNVC: 9

28 Jun 1990

3040-01-322-0683
Remote Control Lever

013220683
4074624: RNCC: 3 | RNVC: 2
4074624: RNCC: 5 | RNVC: 2
3040PL0669121: RNCC: 6 | RNVC: 9

28 Jun 1990

3040-01-323-1791
Pivot Shaft Assembly

013231791
5985179: RNCC: 3 | RNVC: 2

23 Jul 1990

3040-01-325-2148
Mechanical Drive Housing

013252148
4033-742: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-325-6346
Rigid Connecting Link

013256346
4C63121-103A: RNCC: 3 | RNVC: 9
4C63121-103A: RNCC: 5 | RNVC: 9

7 Sep 1990

3040-01-327-5276
Shaft Retaining Plate

013275276
12361750: RNCC: 3 | RNVC: 2
12361750: RNCC: 5 | RNVC: 2
12361750: RNCC: 5 | RNVC: 2
6450E3: RNCC: 5 | RNVC: 9
12361750: RNCC: 7 | RNVC: 2

16 Oct 1990

3040-01-328-8642
Straight Shaft

013288642
347438: RNCC: 3 | RNVC: 2

8 Nov 1990

3040-01-330-4993
Shouldered Shaft Assembly

013304993
3040013304993: RNCC: 3 | RNVC: 2
1300012: RNCC: 3 | RNVC: 9

4 Dec 1990

3040-01-330-5063
Nonrotating Shaft Eye Bracket

013305063
12369153: RNCC: 3 | RNVC: 9
12369153: RNCC: 5 | RNVC: 2

4 Dec 1990

3040-01-330-8263
Double Ball Joint

013308263
29104: RNCC: 3 | RNVC: 2
29104: RNCC: 5 | RNVC: 9
1771AS324-1: RNCC: 7 | RNVC: 2

9 Dec 1990

3040-01-339-1095
Multiple Gears Gearshaft

013391095
746718: RNCC: 3 | RNVC: 2

16 May 1991

3040-01-330-9455
Shouldered Shaft

013309455
7123-770A: RNCC: 3 | RNVC: 2
3040PL0825570: RNCC: 6 | RNVC: 9

12 Dec 1990

3040-01-330-9711
Shield Retaining

013309711
145D5337-1: RNCC: 3 | RNVC: 2
145D5337-1: RNCC: 5 | RNVC: 2

12 Dec 1990

3040-01-331-5492
Extension Shaft

013315492
865B1110: RNCC: 3 | RNVC: 2

20 Dec 1990

3040-01-332-0236
Shaft Retaining Plate

013320236
4046756SA: RNCC: 3 | RNVC: 2
4046756: RNCC: 5 | RNVC: 2

1 Jan 1991

3040-01-341-0142
Counterbalance Weight

013410142
2301020: RNCC: 3 | RNVC: 2
AS44522-060: RNCC: 5 | RNVC: 2
AS44522-060: RNCC: 5 | RNVC: 9
AS44522-060: RNCC: 5 | RNVC: 9
AS44522-060: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-332-5407
Remote Control Lever

013325407
68A831328-1001: RNCC: 3 | RNVC: 2

11 Jan 1991

3040-01-332-7703
Spur Gearshaft

013327703
2AL659: RNCC: 3 | RNVC: 2
2AL659: RNCC: 5 | RNVC: 9

16 Jan 1991

3040-01-332-6047
Control Cable Assembly

013326047
8984111-5: RNCC: 3 | RNVC: 2
10130539: RNCC: 6 | RNVC: 9
3040PL0868179: RNCC: 6 | RNVC: 9

12 Jan 1991

3040-01-336-2876
Turbine Engine Vane Actuating Arm

013362876
1388M41G01: RNCC: 3 | RNVC: 2
P37130: RNCC: 5 | RNVC: 9
1388M41G01: RNCC: 5 | RNVC: 9
1388M41G01: RNCC: 5 | RNVC: 9
1286M45G01: RNCC: C | RNVC: 1

24 Mar 1991

3040-01-336-8293
Rigid Connecting Link

013368293
1 421 933 132: RNCC: 3 | RNVC: 2

3 Apr 1991

3040-01-337-4044
Shouldered Shaft

013374044
034-70814: RNCC: 3 | RNVC: 2
SD-01412: RNCC: 5 | RNVC: 9
034-70176-C: RNCC: 5 | RNVC: 9
SD-01412 PIECE 3: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-337-4169
Linear Actuating Cylinder Piston

013374169
5D3-02298 ITEM 12: RNCC: 3 | RNVC: 2
5D3-02296 ITEM 12: RNCC: 5 | RNVC: 2
5C1-03002: RNCC: 5 | RNVC: 2
5D3-02297 ITEM 12: RNCC: 5 | RNVC: 2
5D3-02298: RNCC: D | RNVC: 9

14 Apr 1991

3040-01-341-5172
Nonrotating Shaft Eye Bracket

013415172
507855: RNCC: 3 | RNVC: 2
TM75114CA5-PG 12 PC 30: RNCC: 5 | RNVC: 9
50785: RNCC: C | RNVC: 1

1 Jul 1991

3040-01-341-7390
Shouldered Shaft

013417390
12592622: RNCC: 3 | RNVC: 2

5 Jul 1991

3040-01-341-6285
Remote Control Lever

013416285
3825062-5: RNCC: 3 | RNVC: 2
3825062-5: RNCC: 5 | RNVC: 2
3825062-5: RNCC: 5 | RNVC: 9
10107037: RNCC: 6 | RNVC: 9

3 Jul 1991

3040-01-343-5576
Bevel Gearshaft

013435576
12592740: RNCC: 3 | RNVC: 2

14 Aug 1991

3040-01-344-5767
Counterbalance Weight

013445767
4502-084: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-344-5768
Counterbalance Weight

013445768
336-015-206-0: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-345-3951
Shaft Collar

013453951
2248-A: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-346-3240
Rigid Connecting Link

013463240
18-17997-003: RNCC: 3 | RNVC: 2
18-17997: RNCC: D | RNVC: 9

3 Oct 1991

3040-01-344-1852
Manual Control Lever

013441852
6984ED70 PIECE NO. 15: RNCC: 3 | RNVC: 2
24-4597-3: RNCC: 5 | RNVC: 2
6984ED70: RNCC: D | RNVC: 9

24 Aug 1991

3040-01-349-7399
Manual Control Lever

013497399
391 1842 004: RNCC: 3 | RNVC: 2

3 Dec 1991

3040-01-349-7892
Spur Gearshaft

013497892
8521-14: RNCC: 3 | RNVC: 2

4 Dec 1991

3040-01-350-0057
Rigid Connecting Link

013500057
780004-1: RNCC: 3 | RNVC: 2
780004: RNCC: D | RNVC: 9

7 Dec 1991

3040-01-349-7927
Rotating Shaft Eye Bracket

013497927
8521-4: RNCC: 3 | RNVC: 2

4 Dec 1991

3040-01-350-8952
Push-Pull Control Assembly

013508952
2A8-03415-1: RNCC: 3 | RNVC: 2
5D3-02236 ITEM 56: RNCC: 5 | RNVC: 2

25 Dec 1991

3040-01-349-8582
Mechanical Drive Housing

013498582
101445-1: RNCC: 3 | RNVC: 2
101346-1: RNCC: 5 | RNVC: 9

5 Dec 1991

3040-01-351-1537
Control Cam

013511537
3035-350: RNCC: 3 | RNVC: 2

1 Jan 1992

3040-01-351-3049
Linear Actuating Cylinder Assembly

013513049
18D-3: RNCC: 3 | RNVC: 2

4 Jan 1992

3040-01-351-8325
Nonrotating Shaft Eye Bracket

013518325
12361539-1: RNCC: 3 | RNVC: 2
12361539: RNCC: D | RNVC: 9

15 Jan 1992

3040-01-352-9166
Rigid Connecting Link

013529166
214-001-023-107: RNCC: 3 | RNVC: 2
214-001-023: RNCC: D | RNVC: 9

1 Feb 1992

3040-01-352-9065
Shaft Collar

013529065
12926847: RNCC: 3 | RNVC: 2

1 Feb 1992

3040-01-352-5812
Mechanical Drive Housing

013525812
13191604-16: RNCC: 3 | RNVC: 2
13191604-16: RNCC: 3 | RNVC: 9
13191604-16: RNCC: 5 | RNVC: 9

29 Jan 1992

3040-01-353-2277
Rigid Connecting Link

013532277
7002717-1: RNCC: 3 | RNVC: 2
10130525: RNCC: 6 | RNVC: 9

7 Feb 1992

3040-01-353-8365
Flexible Shaft Assembly Casing

013538365
612770-8L: RNCC: 3 | RNVC: 2
612770-8R: RNCC: 3 | RNVC: 2

18 Feb 1992

3040-01-354-0412
Linear Actuating Cylinder Assembly Parts Kit

013540412
AH216299: RNCC: 3 | RNVC: 2
AH176126: RNCC: 5 | RNVC: 9
AH176126: RNCC: 5 | RNVC: 9
AH137209: RNCC: 5 | RNVC: 9
AH137209: RNCC: 5 | RNVC: 9

21 Feb 1992

3040-01-354-9153
Linear Actuating Cylinder Piston Rod

013549153
6-768-002396: RNCC: 3 | RNVC: 2
2HE918: RNCC: 5 | RNVC: 2
2HE918: RNCC: 5 | RNVC: 9

7 Mar 1992

3040-01-355-3112
Rigid Connecting Link

013553112
SW32736: RNCC: 3 | RNVC: 2

14 Mar 1992

3040-01-355-6009
Counterbalance Weight

013556009
683819-0001: RNCC: 3 | RNVC: 2
683819-1: RNCC: 5 | RNVC: 9

19 Mar 1992

3040-01-355-5595
Straight Shaft

013555595
6-810-002160: RNCC: 3 | RNVC: 2
2HE925: RNCC: C | RNVC: 1

19 Mar 1992

3040-01-355-7661
Shouldered Shaft

013557661
12926845: RNCC: 3 | RNVC: 2
717124414404: RNCC: 5 | RNVC: 9

23 Mar 1992

3040-01-356-3610
Control Cam

013563610
12910485: RNCC: 3 | RNVC: 2

3 Apr 1992

3040-01-356-8877
Shouldered Shaft

013568877
2179-3429-050: RNCC: 3 | RNVC: 2
2179-3429-050: RNCC: 5 | RNVC: 2
2179-3429-010: RNCC: 5 | RNVC: 9
2179-3429-010: RNCC: 5 | RNVC: 9
2179-3429-010: RNCC: C | RNVC: 1

13 Apr 1992

3040-01-356-8715
Spur Gearshaft

013568715
25640: RNCC: 3 | RNVC: 9
231141: RNCC: 5 | RNVC: 2

12 Apr 1992

3040-01-358-5174
Rigid Connecting Link

013585174
AMBK07-1001: RNCC: 3 | RNVC: 2
17B8D8547-1: RNCC: 7 | RNVC: 2

15 May 1992

3040-01-359-0634
Shouldered Shaft Assembly

013590634
89030-1: RNCC: 3 | RNVC: 9
89020 FIND 51: RNCC: 5 | RNVC: 9
89020 FIND 51: RNCC: C | RNVC: 1
89030-1: RNCC: C | RNVC: 1
89030: RNCC: D | RNVC: 9

28 May 1992

3040-01-360-1035
Straight Shaft

013601035
7W-9737: RNCC: 3 | RNVC: 2
7W9737: RNCC: 5 | RNVC: 2
7W9737: RNCC: 5 | RNVC: 2
7W9737: RNCC: 5 | RNVC: 2
7W9737: RNCC: 5 | RNVC: 9
23KP374: RNCC: 7 | RNVC: 2

17 Jun 1992

3040-01-359-1118
Mechanical Drive Housing

013591118
17585: RNCC: 3 | RNVC: 2
5939258: RNCC: 3 | RNVC: 2
17585: RNCC: 5 | RNVC: 2
5939258: RNCC: 5 | RNVC: 9
3040PL0768039: RNCC: 6 | RNVC: 9

29 May 1992

3040-01-360-6296
Linear Actuating Cylinder Assembly Parts Kit

013606296
57304800: RNCC: 3 | RNVC: 2
13171: RNCC: 5 | RNVC: 2
855017P0800: RNCC: 5 | RNVC: 9

28 Jun 1992

3040-01-361-0753
Nonrotating Shaft Eye Bracket

013610753
12361540-1: RNCC: 3 | RNVC: 2
12361540-1: RNCC: 5 | RNVC: 2
12361540-1: RNCC: 5 | RNVC: 9
12361540: RNCC: D | RNVC: 9

8 Jul 1992

3040-01-361-0754
Nonrotating Shaft Eye Bracket

013610754
12361540-2: RNCC: 3 | RNVC: 2
12361540-2: RNCC: 5 | RNVC: 2
12361540-2: RNCC: 5 | RNVC: 9
12361540: RNCC: D | RNVC: 9

8 Jul 1992

3040-01-361-0757
Ball Joint

013610757
593-6405224 PIECE 83: RNCC: 3 | RNVC: 2
113-A-0098-2: RNCC: 5 | RNVC: 2
593-6405224: RNCC: D | RNVC: 9

8 Jul 1992

3040-01-361-5138
Straight Shaft

013615138
6-810-002152: RNCC: 3 | RNVC: 2
2HG110: RNCC: C | RNVC: 1

18 Jul 1992

3040-01-361-5021
Spur Gearshaft

013615021
3822105-1: RNCC: 3 | RNVC: 2

18 Jul 1992

3040-01-362-3487
Piston Ring Set

013623487
S32152-336-99 PH: RNCC: 3 | RNVC: 2
A78093-336PH-99: RNCC: 5 | RNVC: 2
S32152-336-99 PH: RNCC: 5 | RNVC: 9
A78093: RNCC: D | RNVC: 9
S32152: RNCC: D | RNVC: 9

5 Aug 1992

3040-01-363-2436
Linear Actuating Cylinder Assembly

013632436
1H2A0000268418: RNCC: 3 | RNVC: 2
AF162712A0: RNCC: 5 | RNVC: 2
3AF162712A0: RNCC: 5 | RNVC: 9
3.25CBB-2ANUS14CX24: RNCC: 5 | RNVC: 9

27 Aug 1992

3040-01-363-4363
Mechanical Drive Housing Part

013634363
3883493-3: RNCC: 3 | RNVC: 2
3883493-3: RNCC: 5 | RNVC: 2
3883493: RNCC: D | RNVC: 9

29 Aug 1992

3040-01-364-8291
Control Cam

013648291
N1976: RNCC: 3 | RNVC: 2
1806-1286 ITEM 7: RNCC: 5 | RNVC: 2
1806-1286: RNCC: D | RNVC: 9

25 Sep 1992

3040-01-364-8890
Rigid Connecting Link

013648890
MBEU145909: RNCC: 3 | RNVC: 2
MBEU145909: RNCC: 5 | RNVC: 2

27 Sep 1992

3040-01-364-8891
Rigid Connecting Link

013648891
MBEU145911: RNCC: 3 | RNVC: 2
MBEU145911: RNCC: 5 | RNVC: 2

27 Sep 1992

3040-01-365-2576
Shouldered Shaft

013652576
MBEU141744: RNCC: 3 | RNVC: 2
MBEU141744: RNCC: 5 | RNVC: 2
10107280: RNCC: 6 | RNVC: 9

4 Oct 1992

3040-01-365-2601
Mechanical Drive Housing

013652601
MBEU141329: RNCC: 3 | RNVC: 2
MBEU141329: RNCC: 5 | RNVC: 2
10488865: RNCC: 6 | RNVC: 9

4 Oct 1992

3040-01-365-3040
Pawl

013653040
MBEU140724: RNCC: 3 | RNVC: 2
MBEU140724: RNCC: 5 | RNVC: 2
10177858: RNCC: 6 | RNVC: 9
B48712-003-240: RNCC: C | RNVC: 1

5 Oct 1992

3040-01-365-9294
Pawl

013659294
MBEU140832: RNCC: 3 | RNVC: 9
MBEU140832: RNCC: 5 | RNVC: 2
MBEU140832: RNCC: 5 | RNVC: 9
MBEU140832: RNCC: 5 | RNVC: 9

19 Oct 1992

3040-01-368-6569
Linear Actuating Cylinder Assembly

013686569
1H000006043: RNCC: 3 | RNVC: 2
CYSR 5000 HY84T2B15075063990: RNCC: 3 | RNVC: 9
89156937: RNCC: 5 | RNVC: 9

5 Dec 1992

3040-01-368-4983
Control Cam

013684983
50135-1: RNCC: 3 | RNVC: 2
50135-1: RNCC: 5 | RNVC: 2

3 Dec 1992

3040-01-368-7976
Remote Control Lever

013687976
1876900: RNCC: 3 | RNVC: 2
1876900: RNCC: 5 | RNVC: 9

9 Dec 1992

3040-01-368-8426
Shouldered Shaft

013688426
392198800: RNCC: 3 | RNVC: 9
3921988: RNCC: 5 | RNVC: 9

10 Dec 1992

3040-01-337-6174
Shouldered Shaft

013376174
157D3606: RNCC: 3 | RNVC: 2

18 Apr 1991

3040-01-338-4419
Straight Shaft

013384419
167C2973: RNCC: 3 | RNVC: 2

3 May 1991

3040-01-339-0518
Spur Gearshaft

013390518
747450: RNCC: 3 | RNVC: 2

15 May 1991

3040-01-339-7540
Linear Actuating Cylinder

013397540
101401-2: RNCC: 3 | RNVC: 2

29 May 1991

3040-01-340-4325
Accumlator Test Set

013404325
0538103013: RNCC: 3 | RNVC: 2
0 538 103 013: RNCC: 3 | RNVC: 9
0 538 103 011: RNCC: 5 | RNVC: 9
0 538 103 013: RNCC: 5 | RNVC: 9
0 538 103 011: RNCC: 5 | RNVC: 9
ASC1361065: RNCC: 5 | RNVC: 9
0538103010: RNCC: 5 | RNVC: 9

13 Jun 1991

3040-01-340-4336
Rigid Connecting Link Adapter

013404336
70209-82507-102: RNCC: 3 | RNVC: 2
70209-82507: RNCC: D | RNVC: 9

13 Jun 1991

Load More Results