What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 128 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 128of 575

3040-01-339-7446
Shouldered Shaft

013397446
145R3052-7: RNCC: 3 | RNVC: 2
145R3052-7: RNCC: 5 | RNVC: 1
145R3052-7: RNCC: 7 | RNVC: 2

29 May 1991

3040-01-350-9086
Transmission Range Clutch Hub

013509086
12361757: RNCC: 3 | RNVC: 2
12361757: RNCC: 5 | RNVC: 2
12361757: RNCC: 5 | RNVC: 2
12361757: RNCC: 5 | RNVC: 2
6450 E2: RNCC: 5 | RNVC: 9

25 Dec 1991

3040-01-348-9601
Control Cam

013489601
211046636: RNCC: 3 | RNVC: 2
801-6404977 FIND 6: RNCC: 5 | RNVC: 2
DF330654 FIND 6: RNCC: 5 | RNVC: 9
6404977 FIND 6: RNCC: C | RNVC: 1
801-6404977: RNCC: D | RNVC: 9
6404977: RNCC: D | RNVC: 9

19 Nov 1991

3040-01-350-8441
Shouldered Shaft

013508441
3168811-5: RNCC: 3 | RNVC: 2
10107258: RNCC: 6 | RNVC: 9

23 Dec 1991

3040-01-350-3980
Pawl

013503980
2HE580: RNCC: 1 | RNVC: 2
A2-2297-U-4597: RNCC: 3 | RNVC: 2
0741512: RNCC: 5 | RNVC: 2
A2 2297U4597: RNCC: 5 | RNVC: 9
NA22297U4597: RNCC: 5 | RNVC: 9
2HE580: RNCC: 5 | RNVC: 9

14 Dec 1991

3040-01-350-9161
Nonrotating Shaft Eye Bracket

013509161
12361561-1: RNCC: 3 | RNVC: 2
12361561-1: RNCC: 5 | RNVC: 2
12361561-1: RNCC: 5 | RNVC: 2
12361561: RNCC: D | RNVC: 9

25 Dec 1991

3040-01-355-0533
Oil Pan Parts Kit

013550533
2HS492: RNCC: 3 | RNVC: 2
1933430W: RNCC: 5 | RNVC: 9
2HS492: RNCC: 5 | RNVC: 9

11 Mar 1992

3040-01-355-7694
Rigid Connecting Link

013557694
12553398: RNCC: 3 | RNVC: 2

23 Mar 1992

3040-01-337-8121
Control Cam

013378121
KR2238-3A: RNCC: 3 | RNVC: 2
KR2238: RNCC: D | RNVC: 9
KR780800: RNCC: D | RNVC: 9

21 Apr 1991

3040-01-334-9258
Hub Clamp

013349258
1252143: RNCC: 3 | RNVC: 2
1252143: RNCC: 5 | RNVC: 9

4 Mar 1991

3040-01-338-9643
Shouldered Shaft Assembly

013389643
5008489: RNCC: 3 | RNVC: 2

14 May 1991

3040-01-340-7104
Counterbalance Weight

013407104
2301016: RNCC: 3 | RNVC: 2
AS44522-020: RNCC: 5 | RNVC: 2
AS44522-020: RNCC: 5 | RNVC: 9
AS44522-020: RNCC: 5 | RNVC: 9
AS44522-020: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-346-2803
Linear Actuating Cylinder

013462803
1BB-3LL28A111/2: RNCC: 3 | RNVC: 2
1386AS119-1: RNCC: 7 | RNVC: 2
1BB-3LL28A111/2: RNCC: C | RNVC: 1

1 Oct 1991

3040-01-346-3238
Rigid Connecting Link

013463238
18-23504-000: RNCC: 3 | RNVC: 2
18-23504: RNCC: D | RNVC: 9

3 Oct 1991

3040-01-345-5955
Remote Control Lever

013455955
741723: RNCC: 3 | RNVC: 2
741723: RNCC: 5 | RNVC: 2

21 Sep 1991

3040-01-360-6525
Mechanically Actuated Spindle

013606525
29537932: RNCC: 3 | RNVC: 2
29501556: RNCC: 5 | RNVC: 9
029165T: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-361-0756
Body Hub

013610756
29530449: RNCC: 3 | RNVC: 2
22KP755: RNCC: 5 | RNVC: 1
29500687: RNCC: 5 | RNVC: 2
29500687: RNCC: 5 | RNVC: 2
29500687: RNCC: 5 | RNVC: 9
029098T: RNCC: C | RNVC: 1

8 Jul 1992

3040-01-361-4962
Brake Disc

013614962
56P40-1900: RNCC: 3 | RNVC: 2
56P40-11 REF 16: RNCC: 5 | RNVC: 2

17 Jul 1992

3040-01-362-1775
Shouldered Shaft

013621775
3-P-1050X: RNCC: 3 | RNVC: 2
3-P-832: RNCC: 3 | RNVC: 9
3-P-832: RNCC: 5 | RNVC: 2
3-P-832: RNCC: 5 | RNVC: 2
3-P-832: RNCC: C | RNVC: 1

1 Aug 1992

3040-01-361-5156
Linear Actuating Cylinder Cap

013615156
3563-05: RNCC: 3 | RNVC: 2

18 Jul 1992

3040-01-356-6837
Shouldered Shaft

013566837
12681865: RNCC: 3 | RNVC: 2
1862690W: RNCC: 5 | RNVC: 2
1862690W: RNCC: 5 | RNVC: 9

9 Apr 1992

3040-01-357-7901
Straight Shaft

013577901
3868001-1: RNCC: 3 | RNVC: 2

30 Apr 1992

3040-01-358-8708
Rigid Connecting Link

013588708
17387: RNCC: 3 | RNVC: 2
5938683: RNCC: 5 | RNVC: 2
5342PL0765573: RNCC: 6 | RNVC: 9

22 May 1992

3040-01-317-2279
Shaft Collar

013172279
7269282: RNCC: 3 | RNVC: 2

24 Mar 1990

3040-01-317-1580
Rigid Connecting Link

013171580
7339435: RNCC: 3 | RNVC: 2

23 Mar 1990

3040-01-317-2813
Control Cam

013172813
3031-554: RNCC: 3 | RNVC: 2

27 Mar 1990

3040-01-318-3718
Spur Gearshaft

013183718
A-15268: RNCC: 3 | RNVC: 2

17 Apr 1990

3040-01-317-0271
Rigid Connecting Link

013170271
4069279: RNCC: 3 | RNVC: 2
4069279: RNCC: 5 | RNVC: 2
3040PL0668545: RNCC: 6 | RNVC: 9

21 Mar 1990

3040-01-318-7931
Shouldered Shaft

013187931
210105: RNCC: 3 | RNVC: 2

25 Apr 1990

3040-01-319-4340
Straight Shaft

013194340
A-18558: RNCC: 3 | RNVC: 9

8 May 1990

3040-01-320-0995
Rigid Connecting Link

013200995
4417-172: RNCC: 3 | RNVC: 2
4417-172: RNCC: 3 | RNVC: 2

18 May 1990

3040-01-320-5414
Control Cam

013205414
2676563: RNCC: 3 | RNVC: 2

26 May 1990

3040-01-321-4540
Manual Control Lever

013214540
14301-6631-0: RNCC: 3 | RNVC: 9
14301-6631-1: RNCC: 5 | RNVC: 9

19 Jun 1990

3040-01-321-9998
Spur Gearshaft

013219998
5190291: RNCC: 3 | RNVC: 2
5190291: RNCC: 5 | RNVC: 2

27 Jun 1990

3040-01-323-9140
Mechanical Drive Housing

013239140
9340M58P02: RNCC: 3 | RNVC: 2

5 Aug 1990

3040-01-323-4208
Extension Shaft

013234208
3825029-2: RNCC: 3 | RNVC: 2
3825029-2: RNCC: 3 | RNVC: 9
3825029-2: RNCC: 5 | RNVC: 9
3040PL1195639: RNCC: 6 | RNVC: 9

27 Jul 1990

3040-01-325-2180
Spur Gearshaft

013252180
3024-312: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-325-4928
Control Cam

013254928
7002541-1: RNCC: 3 | RNVC: 2
7002541-1: RNCC: 5 | RNVC: 2
7002541-1: RNCC: 5 | RNVC: 2
10107027: RNCC: 6 | RNVC: 9

5 Sep 1990

3040-01-325-8272
Rigid Connecting Link

013258272
75A353058-1001: RNCC: 3 | RNVC: 2
75A353058: RNCC: D | RNVC: 9

11 Sep 1990

3040-01-326-5945
Shouldered Shaft

013265945
1203512: RNCC: 3 | RNVC: 2
PL-321684 ITEM 4: RNCC: 5 | RNVC: 2
PL-321684: RNCC: D | RNVC: 9

27 Sep 1990

3040-01-325-9179
Spur Gearshaft

013259179
605-033-002: RNCC: 3 | RNVC: 2
605-033-002: RNCC: 5 | RNVC: 9

13 Sep 1990

3040-01-326-9752
Shaft Retaining Plate

013269752
742080: RNCC: 3 | RNVC: 2

4 Oct 1990

3040-01-327-1977
Straight Shaft

013271977
TU7356: RNCC: 3 | RNVC: 9

10 Oct 1990

3040-01-327-2929
Linear Actuating Cylinder Piston

013272929
T116563: RNCC: 3 | RNVC: 2
4642 306 248: RNCC: 5 | RNVC: 9

11 Oct 1990

3040-01-327-5007
Control Cam

013275007
2676015: RNCC: 3 | RNVC: 2

16 Oct 1990

3040-01-327-6002
Control Cam

013276002
2676012: RNCC: 3 | RNVC: 2

17 Oct 1990

3040-01-327-7629
Friction Lining

013277629
83-64-410C: RNCC: 3 | RNVC: 2

21 Oct 1990

3040-01-328-8016
Flexible Casing End Fitting

013288016
5-4-6953: RNCC: 3 | RNVC: 2

7 Nov 1990

3040-01-330-5064
Nonrotating Shaft Eye Bracket

013305064
12369152: RNCC: 3 | RNVC: 2

4 Dec 1990

3040-01-330-9490
Multiple Gears Gearshaft

013309490
4004792-0001: RNCC: 3 | RNVC: 2
4004792: RNCC: D | RNVC: 9

12 Dec 1990

3040-01-332-5474
Rigid Connecting Link

013325474
12371009: RNCC: 1 | RNVC: 2
23048552: RNCC: 3 | RNVC: 2

11 Jan 1991

3040-01-333-0542
Rigid Connecting Link

013330542
209-001-079-101: RNCC: 3 | RNVC: 2

21 Jan 1991

3040-01-330-6124
Nonrotating Shaft Eye Bracket

013306124
1127722: RNCC: 3 | RNVC: 2
315494 FIND 17: RNCC: 5 | RNVC: 2
315494: RNCC: D | RNVC: 9

5 Dec 1990

3040-01-334-0751
Rigid Connecting Link

013340751
753665-2: RNCC: 3 | RNVC: 2

14 Feb 1991

3040-01-334-4901
Straight Shaft

013344901
1226-224: RNCC: 3 | RNVC: 2

23 Feb 1991

3040-01-335-8519
Flexible Drive Shaft

013358519
9380316-2: RNCC: 1 | RNVC: 2
0312-18634-Y-022.75: RNCC: 3 | RNVC: 9
B-404-9398-102: RNCC: 5 | RNVC: 2

14 Mar 1991

3040-01-338-2410
Linear Actuating Cylinder Assembly

013382410
ARS/BVC3A: RNCC: 3 | RNVC: 2
80.618.00.019: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-4433
Shouldered Shaft

013384433
1704350: RNCC: 3 | RNVC: 2
1704350: RNCC: 5 | RNVC: 9

3 May 1991

3040-01-337-0659
Rigid Connecting Link

013370659
70209-82507-041: RNCC: 3 | RNVC: 2

9 Apr 1991

3040-01-337-4157
Mechanical Drive Housing

013374157
A027096829: RNCC: 3 | RNVC: 9
A027096829: RNCC: 5 | RNVC: 2
2EH558: RNCC: 5 | RNVC: 2
2EH558: RNCC: 5 | RNVC: 9
71260: RNCC: 5 | RNVC: 9
96829: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-340-9792
Shouldered Shaft

013409792
2B1-430: RNCC: 3 | RNVC: 2
2B1-430: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-2439
Linear Actuating Cylinder Assembly

013412439
1304153: RNCC: 3 | RNVC: 2
1304153: RNCC: 5 | RNVC: 2

26 Jun 1991

3040-01-341-4993
Linear Actuating Cylinder Assembly Parts Kit

013414993
CB152HL005: RNCC: 3 | RNVC: 2

1 Jul 1991

3040-01-341-7011
Shaft Collar

013417011
204900: RNCC: 3 | RNVC: 2

5 Jul 1991

3040-01-342-8714
Breather

013428714
000374020-004: RNCC: 3 | RNVC: 2
061-000-084 ITEM 70: RNCC: 5 | RNVC: 2

31 Jul 1991

3040-01-344-1840
Mechanical Drive Housing

013441840
741715: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-344-5745
Shaft Collar

013445745
12591549: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-344-9334
Multiple Gears Gearshaft

013449334
1891070 U: RNCC: 3 | RNVC: 2
1891070 U: RNCC: 5 | RNVC: 9
1891070: RNCC: D | RNVC: 9

8 Sep 1991

3040-01-345-5693
Straight Shaft

013455693
1723870: RNCC: 3 | RNVC: 2
1723870: RNCC: 5 | RNVC: 9

21 Sep 1991

3040-01-346-9820
Shaft Collar

013469820
1721380: RNCC: 3 | RNVC: 2
1721380: RNCC: 5 | RNVC: 9
B-2848: RNCC: 5 | RNVC: 9

12 Oct 1991

3040-01-346-9871
Mechanical Drive Housing

013469871
013592: RNCC: 3 | RNVC: 2
2HG714: RNCC: 5 | RNVC: 2
2HG714: RNCC: 5 | RNVC: 9
013592: RNCC: 5 | RNVC: 9
2GH463: RNCC: C | RNVC: 1
96-013669: RNCC: D | RNVC: 9

12 Oct 1991

3040-01-347-4427
Shouldered Shaft

013474427
6318288: RNCC: 1 | RNVC: 2
592-6318288: RNCC: 3 | RNVC: 2
550-057: RNCC: 5 | RNVC: 1
BK850427110: RNCC: 5 | RNVC: 1

21 Oct 1991

3040-01-348-4524
Spur Gearshaft

013484524
3501311-1: RNCC: 3 | RNVC: 2
3501311: RNCC: D | RNVC: 9

9 Nov 1991

3040-01-350-9062
Shaft Collar

013509062
12370627: RNCC: 3 | RNVC: 2
12370627: RNCC: 5 | RNVC: 2
12370627: RNCC: 5 | RNVC: 2

25 Dec 1991

3040-01-351-6027
Nonrotating Shaft Eye Bracket

013516027
12361539-2: RNCC: 3 | RNVC: 2
12361539-2: RNCC: 5 | RNVC: 9
12361539: RNCC: D | RNVC: 9

11 Jan 1992

3040-01-351-7405
Rotating Shaft Eye Bracket

013517405
717512895-009: RNCC: 3 | RNVC: 2
717512895-009: RNCC: 5 | RNVC: 2

15 Jan 1992

3040-01-351-9959
Piston Ring

013519959
7-753-000544: RNCC: 3 | RNVC: 9
7-753-000544: RNCC: 5 | RNVC: 2
7-753-000544: RNCC: 5 | RNVC: 2
7-753-000544: RNCC: 5 | RNVC: 2
2CD804: RNCC: C | RNVC: 1

17 Jan 1992

3040-01-352-2346
Mechanical Drive Housing

013522346
SP1C43C: RNCC: 3 | RNVC: 1
SP1C43CXC: RNCC: 5 | RNVC: 9
15636A: RNCC: 5 | RNVC: 9

23 Jan 1992

3040-01-352-6093
Linear Actuating Cylinder Piston

013526093
40A2034: RNCC: 3 | RNVC: 2

29 Jan 1992

3040-01-348-8878
Brake Shoe

013488878
B2-1A: RNCC: 3 | RNVC: 2
B2-1A: RNCC: 3 | RNVC: 9
A1063-22: RNCC: 5 | RNVC: 9

19 Nov 1991

3040-01-353-8364
Flexible Shaft Assembly Casing

013538364
612463-5R: RNCC: 3 | RNVC: 2

18 Feb 1992

3040-01-354-0569
Body Hub

013540569
0011-2002: RNCC: 3 | RNVC: 2
001-ALUM 4-HOLE HUB: RNCC: 5 | RNVC: 9

21 Feb 1992

3040-01-355-1117
Adapter Shaft Assembly

013551117
DAA3272P016-425: RNCC: 1 | RNVC: 2
125328C-07: RNCC: 3 | RNVC: 2
125328B-7: RNCC: 5 | RNVC: 9
DAA3272P016-125: RNCC: 5 | RNVC: 9

11 Mar 1992

3040-01-355-9067
Shouldered Shaft Assembly

013559067
1253288-3: RNCC: 3 | RNVC: 2
DAA3272P016-117: RNCC: 5 | RNVC: 2

26 Mar 1992

3040-01-355-9068
Shouldered Shaft Assembly

013559068
125328B-8: RNCC: 3 | RNVC: 2
DAA3272P016-127: RNCC: 5 | RNVC: 2
1253288-8: RNCC: 5 | RNVC: 9

26 Mar 1992

3040-01-355-7695
Rigid Connecting Link

013557695
123AMM42155-611: RNCC: 3 | RNVC: 2
123AMM42155-611: RNCC: 5 | RNVC: 9
123AMM42155: RNCC: D | RNVC: 9

23 Mar 1992

3040-01-355-9560
Control Cam

013559560
FRUWCF1376-1: RNCC: 3 | RNVC: 9
WCF001376001: RNCC: 5 | RNVC: 9

27 Mar 1992

3040-01-356-4640
Linear Actuating Cylinder

013564640
230049: RNCC: 3 | RNVC: 2
100035: RNCC: 3 | RNVC: 9
25564: RNCC: 5 | RNVC: 9

4 Apr 1992

3040-01-356-9821
Shaft Collar

013569821
12592589: RNCC: 3 | RNVC: 2

15 Apr 1992

3040-01-363-2769
Pawl

013632769
195683-A: RNCC: 3 | RNVC: 2

27 Aug 1992

3040-01-363-7081
Spline Adapter

013637081
23014: RNCC: 3 | RNVC: 2
5905733-2: RNCC: 5 | RNVC: 2
5905733: RNCC: D | RNVC: 9

4 Sep 1992

3040-01-363-8659
Rigid Connecting Link

013638659
CAT0063: RNCC: 3 | RNVC: 2
CAT0063: RNCC: 5 | RNVC: 9

8 Sep 1992

3040-01-363-8162
Rigid Connecting Link

013638162
17P2C1410-1: RNCC: 3 | RNVC: 2

6 Sep 1992

3040-01-363-3756
Spring Rewind Housing

013633756
323091L-PNT1: RNCC: 3 | RNVC: 2
323091L: RNCC: 5 | RNVC: 9

28 Aug 1992

3040-01-365-2614
Linear Actuating Cylinder Piston

013652614
MBEU146493: RNCC: 3 | RNVC: 2
MBEU146493: RNCC: 5 | RNVC: 2
10107283: RNCC: 6 | RNVC: 9

4 Oct 1992

3040-01-365-2738
Rigid Connecting Link

013652738
MBEU147188: RNCC: 3 | RNVC: 2
MBEU147188: RNCC: 5 | RNVC: 2

4 Oct 1992

3040-01-366-3817
Shaft Collar

013663817
12950873: RNCC: 3 | RNVC: 2

24 Oct 1992

3040-01-366-5770
Rigid Connecting Link

013665770
DAA3255A237-001: RNCC: 3 | RNVC: 2
DAA32554A237-001: RNCC: 5 | RNVC: 9

28 Oct 1992

3040-01-367-4963
Linear Actuating Cylinder Assembly

013674963
SW22477: RNCC: 3 | RNVC: 2
11800: RNCC: 5 | RNVC: 2
8803-030: RNCC: 5 | RNVC: 9

13 Nov 1992

3040-01-367-9649
Shouldered Shaft

013679649
12950872: RNCC: 3 | RNVC: 2

22 Nov 1992

3040-01-368-0087
Linear Actuating Cylinder Assembly

013680087
8801-008: RNCC: 3 | RNVC: 9
8801-008E: RNCC: 5 | RNVC: 9
SW24920: RNCC: 7 | RNVC: 2

23 Nov 1992

3040-01-368-2703
Control Cam

013682703
211038971: RNCC: 3 | RNVC: 2
801-6405531-5: RNCC: 5 | RNVC: 2
801-6405531: RNCC: D | RNVC: 9

27 Nov 1992

3040-01-368-8196
Shouldered Shaft

013688196
13168: RNCC: 3 | RNVC: 2
2HP277: RNCC: 5 | RNVC: 2
2HP277: RNCC: 5 | RNVC: 9
13168-G: RNCC: 5 | RNVC: 9

9 Dec 1992

3040-01-368-8253
Spur Gearshaft

013688253
756798: RNCC: 3 | RNVC: 2

9 Dec 1992

3040-01-369-4159
Shouldered Shaft

013694159
20717-1030: RNCC: 3 | RNVC: 2
20717-003 FIND 12: RNCC: 5 | RNVC: 9

22 Dec 1992

3040-01-370-1568
Remote Control Lever

013701568
308235: RNCC: 3 | RNVC: 9
345947: RNCC: 5 | RNVC: 2
308235: RNCC: 5 | RNVC: 9
345947: RNCC: 5 | RNVC: 9

14 Jan 1993

3040-01-360-8040
Body Hub

013608040
29511396: RNCC: 3 | RNVC: 2
29511396: RNCC: 5 | RNVC: 2
29511396: RNCC: 5 | RNVC: 2
29503970: RNCC: 5 | RNVC: 9

1 Jul 1992

3040-01-361-0574
Shouldered Shaft

013610574
3P678X: RNCC: 3 | RNVC: 2
3-P-678: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-316-1117
Linear Actuating Cylinder Assembly

013161117
1350357: RNCC: 3 | RNVC: 2
1350357: RNCC: 3 | RNVC: 9
379555: RNCC: 5 | RNVC: 9

3 Mar 1990

3040-01-316-0566
Counterbalance Weight

013160566
3755-6: RNCC: 3 | RNVC: 2
3755-6: RNCC: 5 | RNVC: 2
3755-6: RNCC: 5 | RNVC: 2
3040PL0905117: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-7740
Brake Shoe

013167740
510984: RNCC: 3 | RNVC: 2

16 Mar 1990

3040-01-316-3087
Winch Jackscrew

013163087
24968-1: RNCC: 3 | RNVC: 2
24968: RNCC: D | RNVC: 9

8 Mar 1990

3040-01-316-8841
Bell Crank

013168841
12370821: RNCC: 3 | RNVC: 2
12353551: RNCC: 5 | RNVC: 9

16 Mar 1990

3040-01-316-9688
Straight Axle

013169688
LG0094-6400: RNCC: 3 | RNVC: 2
LG0094: RNCC: 5 | RNVC: 2
LG0094-64: RNCC: 5 | RNVC: 9

19 Mar 1990

3040-01-317-2812
Control Cam

013172812
3035-328: RNCC: 3 | RNVC: 2
3035-328: RNCC: 5 | RNVC: 2
3035-328: RNCC: 5 | RNVC: 2

27 Mar 1990

3040-01-318-0247
Linear Actuating Cylinder Assembly Parts Kit

013180247
AH149843: RNCC: 3 | RNVC: 2
RE20430: RNCC: 5 | RNVC: 9
RE20430: RNCC: 5 | RNVC: 9

11 Apr 1990

3040-01-318-0787
Tie Bar Molding

013180787
198583-B: RNCC: 3 | RNVC: 2
198583B00: RNCC: 5 | RNVC: 2

12 Apr 1990

3040-01-318-4848
Manual Release Brake Assembly

013184848
120612-101: RNCC: 3 | RNVC: 2
120612: RNCC: 5 | RNVC: 9
120612-101: RNCC: 5 | RNVC: 9
120612: RNCC: 5 | RNVC: 9

19 Apr 1990

3040-01-318-7613
Turbine Engine Compressor Stator Arm

013187613
4079920: RNCC: 3 | RNVC: 2
4066817: RNCC: 5 | RNVC: 2

25 Apr 1990

3040-01-320-9291
Friction Lining

013209291
78551480: RNCC: 3 | RNVC: 2

6 Jun 1990

3040-01-320-9424
Shouldered Shaft

013209424
856A4055P79: RNCC: 3 | RNVC: 2
856A4055P79: RNCC: 3 | RNVC: 9

6 Jun 1990

3040-01-321-6242
Rigid Connecting Link

013216242
4069486: RNCC: 3 | RNVC: 2
3040PL0669105: RNCC: 6 | RNVC: 9

20 Jun 1990

3040-01-322-7785
Remote Control Lever

013227785
7002533-1: RNCC: 3 | RNVC: 2
7002533-1: RNCC: 5 | RNVC: 2
10130527: RNCC: 6 | RNVC: 9

13 Jul 1990

3040-01-322-7786
Remote Control Lever

013227786
7002542-1: RNCC: 3 | RNVC: 2
7002542-1: RNCC: 5 | RNVC: 9
10107020: RNCC: 6 | RNVC: 9

13 Jul 1990

3040-01-323-0110
Straight Shaft

013230110
36-155-070: RNCC: 3 | RNVC: 2
6455007623: RNCC: 5 | RNVC: 9

18 Jul 1990

3040-01-323-3294
Remote Control Lever

013233294
114250-03591: RNCC: 3 | RNVC: 2
114250-03591: RNCC: 3 | RNVC: 9
3040PL0806627: RNCC: 6 | RNVC: 9

26 Jul 1990

3040-01-323-5939
Shouldered Shaft

013235939
SW25350: RNCC: 3 | RNVC: 2

31 Jul 1990

3040-01-324-1191
Shouldered Shaft

013241191
S13-44466-0: RNCC: 3 | RNVC: 2
S13-44466: RNCC: 5 | RNVC: 9

10 Aug 1990

3040-01-325-9498
Shouldered Shaft

013259498
M05-12713-P1: RNCC: 3 | RNVC: 1
M00-12696-G1/3 ITEM 8VM: RNCC: 5 | RNVC: 2
M05-12713-P1VM: RNCC: 5 | RNVC: 2
M00-12696-G1/3 ITEM 8: RNCC: 5 | RNVC: 9

14 Sep 1990

3040-01-325-8194
Shouldered Shaft

013258194
3C3165P06: RNCC: 3 | RNVC: 2
3C3165P06: RNCC: 5 | RNVC: 2
363165P06: RNCC: 5 | RNVC: 9
3C3165P06: RNCC: 5 | RNVC: 9
3C3165P06: RNCC: 5 | RNVC: 9
3C3165: RNCC: D | RNVC: 9

11 Sep 1990

3040-01-326-9723
Control Cam

013269723
68A351075-2005: RNCC: 3 | RNVC: 2

4 Oct 1990

3040-01-327-0470
Shouldered Shaft

013270470
11688: RNCC: 3 | RNVC: 2
11688-G: RNCC: 3 | RNVC: 2
2GL22: RNCC: 5 | RNVC: 2
11688: RNCC: 5 | RNVC: 9
2GL22: RNCC: 5 | RNVC: 9

5 Oct 1990

3040-01-327-5273
Rigid Connecting Link

013275273
9540M47G01: RNCC: 3 | RNVC: 2
9540M47G01: RNCC: 5 | RNVC: 2
9540M47: RNCC: D | RNVC: 9

16 Oct 1990

3040-01-327-8065
Straight Shaft

013278065
65276F01: RNCC: 3 | RNVC: 2
75125F91 ITEM AR: RNCC: 5 | RNVC: 2
74548F02: RNCC: 5 | RNVC: 9

21 Oct 1990

3040-01-328-2892
Shouldered Shaft

013282892
2111007-256: RNCC: 3 | RNVC: 2

30 Oct 1990

3040-01-328-3485
Mechanical Drive Housing

013283485
1353AS116-1: RNCC: 3 | RNVC: 2

30 Oct 1990

3040-01-329-8567
Manual Control Lever

013298567
397001: RNCC: 3 | RNVC: 2
397001: RNCC: 3 | RNVC: 9
397001: RNCC: 5 | RNVC: 9
397001: RNCC: 5 | RNVC: 9

24 Nov 1990

3040-01-330-0646
Shouldered Shaft

013300646
KIT2825: RNCC: 3 | RNVC: 2
2244-K-1025: RNCC: 5 | RNVC: 2
2244-K-1025: RNCC: 5 | RNVC: 9

29 Nov 1990

3040-01-329-5097
Push-Pull Control Assembly

013295097
3025-075-0560: RNCC: 3 | RNVC: 2
56V02-3-220: RNCC: 3 | RNVC: 2
016845V: RNCC: 5 | RNVC: 2
D038033-003-0220.0: RNCC: 5 | RNVC: 9
D038033-003-0220.0: RNCC: 5 | RNVC: 9
56V02-3-220: RNCC: 5 | RNVC: 9

18 Nov 1990

3040-01-330-7800
Shouldered Shaft

013307800
5061T13P01: RNCC: 3 | RNVC: 2
55061T13P01: RNCC: 5 | RNVC: 9
5061T13P01: RNCC: 5 | RNVC: 9
5061T13P01: RNCC: 5 | RNVC: 9

8 Dec 1990

3040-01-331-1755
Mechanical Drive Housing

013311755
329501092A01: RNCC: 3 | RNVC: 2
A8-3235-W-1843: RNCC: 5 | RNVC: 2
A8-3235-W-1843: RNCC: 5 | RNVC: 2
A8-3235-W-1843: RNCC: 5 | RNVC: 9

14 Dec 1990

3040-01-332-8549
Mechanical Drive Housing

013328549
582312-4: RNCC: 3 | RNVC: 2
10107035: RNCC: 6 | RNVC: 9

18 Jan 1991

3040-01-333-0973
Carrier Ring

013330973
518200200: RNCC: 3 | RNVC: 2
5-18-2002: RNCC: 5 | RNVC: 9

24 Jan 1991

3040-01-333-1925
Linear Actuating Cylinder Assembly Parts Kit

013331925
A-2813: RNCC: 3 | RNVC: 2
73000579: RNCC: 5 | RNVC: 9

26 Jan 1991

3040-01-336-2889
Rigid Connecting Link

013362889
F405-10882-1: RNCC: 3 | RNVC: 2
F405-10882-1: RNCC: 5 | RNVC: 9

24 Mar 1991

3040-01-337-4549
Linear Actuating Cylinder Head

013374549
CB27583-001: RNCC: 3 | RNVC: 2
29527: RNCC: 3 | RNVC: 9
895-29475 ITEM 8: RNCC: 5 | RNVC: 2
895-29475 REV G ITEM 8: RNCC: 5 | RNVC: 9

14 Apr 1991

3040-01-337-5150
Shaft Collar

013375150
218F751: RNCC: 3 | RNVC: 2

16 Apr 1991

3040-01-339-2550
Straight Shaft

013392550
8922968: RNCC: 3 | RNVC: 2

19 May 1991

3040-01-339-7565
Rigid Connecting Link

013397565
101369-1: RNCC: 3 | RNVC: 2

29 May 1991

3040-01-339-7507
Shouldered Shaft

013397507
70654-23801-102: RNCC: 1 | RNVC: 2
DS-937978: RNCC: 3 | RNVC: 2
937978: RNCC: 3 | RNVC: 2

29 May 1991

3040-01-339-8268
Linear Actuating Cylinder Assembly

013398268
1306169: RNCC: 3 | RNVC: 2
1306169: RNCC: 5 | RNVC: 9

31 May 1991

3040-01-341-0141
Counterbalance Weight

013410141
2301018: RNCC: 3 | RNVC: 2
AS44522-040: RNCC: 5 | RNVC: 2
AS44520 THRU 23: RNCC: 5 | RNVC: 9
AS44522-040: RNCC: 5 | RNVC: 9
AS44522-040: RNCC: 5 | RNVC: 9
AS44522-040: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-5030
Transfer Drive Clutch Shaft

013415030
501071: RNCC: 3 | RNVC: 2
TM75114CA5-PG16 PC 15: RNCC: 5 | RNVC: 9
501071: RNCC: 5 | RNVC: 9

1 Jul 1991

3040-01-341-8605
Shouldered Shaft

013418605
803-5959220 PIECE 27: RNCC: 3 | RNVC: 2
803-5959220: RNCC: D | RNVC: 9

10 Jul 1991

3040-01-342-4425
Multiple Disk Brake

013424425
536290: RNCC: 3 | RNVC: 2
AA191071: RNCC: 3 | RNVC: 2
AA191071: RNCC: 5 | RNVC: 9
AA19107-1: RNCC: 5 | RNVC: 9
536290: RNCC: 5 | RNVC: 9

23 Jul 1991

3040-01-342-5125
Breather

013425125
061-000-087 ITEM 71: RNCC: 3 | RNVC: 2
0003740 20-002: RNCC: 5 | RNVC: 2
061-000087: RNCC: D | RNVC: 9

25 Jul 1991

3040-01-342-2454
Shaft Collar

013422454
803-5959220 PIECE 32: RNCC: 3 | RNVC: 2
803-5959220: RNCC: D | RNVC: 9

17 Jul 1991

3040-01-342-5137
Linear Actuating Cylinder Piston

013425137
90-004-1182: RNCC: 3 | RNVC: 2
90-004-1182 ITEM 2: RNCC: 5 | RNVC: 2

25 Jul 1991

3040-01-342-5214
Rigid Connecting Link

013425214
4436-154: RNCC: 3 | RNVC: 2

25 Jul 1991

3040-01-345-3002
Brake Disc

013453002
05360: RNCC: 3 | RNVC: 2
07010: RNCC: 5 | RNVC: 9

16 Sep 1991

3040-01-345-3580
Shouldered Shaft

013453580
40A95913-1: RNCC: 3 | RNVC: 2

18 Sep 1991

3040-01-344-1856
Linear Actuating Cylinder Piston

013441856
741725: RNCC: 3 | RNVC: 2

24 Aug 1991

3040-01-346-9955
Nonrotating Shaft Eye Bracket

013469955
SB-6: RNCC: 3 | RNVC: 2
996193-001: RNCC: 5 | RNVC: 2
996193: RNCC: 7 | RNVC: 1

12 Oct 1991

3040-01-347-4449
Counterbalance Weight

013474449
6170343: RNCC: 3 | RNVC: 2
6170343: RNCC: 5 | RNVC: 2

21 Oct 1991

3040-01-348-1363
Counterbalance Weight

013481363
AS44520-010: RNCC: 3 | RNVC: 2
AS44520-010: RNCC: 5 | RNVC: 2
AS44520-010: RNCC: 5 | RNVC: 9
AS44520-010: RNCC: 5 | RNVC: 9
AS44520-010: RNCC: 5 | RNVC: 9

5 Nov 1991

3040-01-348-6402
Brake Disc

013486402
8-004-702-00: RNCC: 3 | RNVC: 9
D-1200-JQ PC 14: RNCC: 5 | RNVC: 9
D-1200-JQ: RNCC: D | RNVC: 9

14 Nov 1991

3040-01-348-6492
Rigid Connecting Link

013486492
SW34689-1: RNCC: 3 | RNVC: 2
ULC0295: RNCC: 5 | RNVC: 2
SW33461: RNCC: 5 | RNVC: 9
SW31398: RNCC: 5 | RNVC: 9
3040013486492: RNCC: 6 | RNVC: 9
SW34689: RNCC: D | RNVC: 9

14 Nov 1991

3040-01-350-3313
Friction Lining Set

013503313
13-8480-1X2: RNCC: 3 | RNVC: 2
468480 PIECE 1: RNCC: 5 | RNVC: 2

13 Dec 1991

3040-01-350-6307
Straight Shaft

013506307
12361486: RNCC: 3 | RNVC: 2
12361486: RNCC: 5 | RNVC: 2
12361486: RNCC: 5 | RNVC: 2

19 Dec 1991

3040-01-350-9064
Straight Shaft

013509064
5D3-02236 ITEM 4: RNCC: 3 | RNVC: 2
5B1-03402 ITEM 4: RNCC: 5 | RNVC: 2
5B1-03402: RNCC: 5 | RNVC: 2
5D3-02236: RNCC: D | RNVC: 9

25 Dec 1991

3040-01-352-2413
Nonrotating Shaft Eye Bracket

013522413
1977709: RNCC: 3 | RNVC: 2

23 Jan 1992

3040-01-353-0258
Shouldered Shaft Assembly

013530258
40A2216: RNCC: 3 | RNVC: 2

5 Feb 1992

3040-01-353-0747
Remote Control Lever

013530747
593-6405224 PIECE 16: RNCC: 3 | RNVC: 2
6405224-16: RNCC: 5 | RNVC: 2
593-6405224 PIECE 6: RNCC: 5 | RNVC: 9
6405224 PIECE 6: RNCC: 5 | RNVC: 9
6405224: RNCC: D | RNVC: 9

5 Feb 1992

3040-01-353-2465
Rigid Connecting Link

013532465
13858-1: RNCC: 3 | RNVC: 2

7 Feb 1992

3040-01-353-8509
Shouldered Shaft

013538509
526-1067-02: RNCC: 3 | RNVC: 2
10107274: RNCC: 6 | RNVC: 9
526-1067: RNCC: D | RNVC: 9

19 Feb 1992

3040-01-354-2807
Brake Disc

013542807
4001362: RNCC: 3 | RNVC: 2
4001362: RNCC: 5 | RNVC: 9

26 Feb 1992

3040-01-355-3122
Linear Actuating Cylinder Head

013553122
6-372-003339: RNCC: 3 | RNVC: 2
2HE919: RNCC: 5 | RNVC: 2
2HE919: RNCC: 5 | RNVC: 9

14 Mar 1992

3040-01-355-5068
Rigid Connecting Link

013555068
209-001-083-101: RNCC: 3 | RNVC: 2

19 Mar 1992

3040-01-355-6032
Accumulator Cap

013556032
12910595-1: RNCC: 3 | RNVC: 2
12910595: RNCC: D | RNVC: 9

19 Mar 1992

3040-01-355-6026
Mechanical Drive Housing

013556026
9363701: RNCC: 3 | RNVC: 2

19 Mar 1992

3040-01-355-6370
Push-Pull Control Assembly

013556370
6539C010-5: RNCC: 3 | RNVC: 2
6539C010-5: RNCC: 5 | RNVC: 2
6539C010-5: RNCC: 5 | RNVC: 2
6539C010-3: RNCC: 5 | RNVC: 9
6539C010: RNCC: D | RNVC: 9

20 Mar 1992

3040-01-355-9716
Rigid Connecting Link

013559716
2-195-2-00008: RNCC: 3 | RNVC: 2
2HE950: RNCC: 5 | RNVC: 2
2HE950: RNCC: 5 | RNVC: 9

27 Mar 1992

3040-01-356-6947
Rigid Connecting Link

013566947
1635: RNCC: 3 | RNVC: 2
215-15-002-000: RNCC: 5 | RNVC: 9

9 Apr 1992

3040-01-356-7858
Worm Shaft

013567858
2179-3420-010: RNCC: 3 | RNVC: 2
2179-3420-010: RNCC: 5 | RNVC: 9
2179-3420-010: RNCC: 5 | RNVC: 9
PL 2179-3429-01: RNCC: C | RNVC: 1
2179-3420-010: RNCC: C | RNVC: 1

10 Apr 1992

3040-01-356-8691
Counterbalance Weight

013568691
A334A326-101: RNCC: 3 | RNVC: 2

12 Apr 1992

3040-01-358-8143
Mechanical Drive Housing

013588143
42357-121: RNCC: 3 | RNVC: 2

21 May 1992

3040-01-359-1119
Mechanical Drive Housing

013591119
17728: RNCC: 3 | RNVC: 2
17584: RNCC: 5 | RNVC: 2
5742777: RNCC: 5 | RNVC: 2
17584: RNCC: 5 | RNVC: 9
5939259: RNCC: 5 | RNVC: 9
5939259: RNCC: 5 | RNVC: 9

29 May 1992

3040-01-360-2474
Rigid Connecting Link

013602474
S4334010030: RNCC: 3 | RNVC: 2
3HR771: RNCC: 5 | RNVC: 9
3HR771: RNCC: 5 | RNVC: 9
1874860: RNCC: 7 | RNVC: 2

20 Jun 1992

3040-01-359-1116
Mechanical Drive Housing

013591116
17292: RNCC: 3 | RNVC: 2
5938604: RNCC: 5 | RNVC: 2
17292: RNCC: 5 | RNVC: 2
59338604: RNCC: 5 | RNVC: 9

29 May 1992

3040-01-360-4443
Housing Adapter

013604443
29506122: RNCC: 3 | RNVC: 2
29506122: RNCC: 5 | RNVC: 2
29506122: RNCC: 5 | RNVC: 2

24 Jun 1992

3040-01-358-6809
Housing Adapter

013586809
17128-2: RNCC: 3 | RNVC: 2

18 May 1992

3040-01-361-2428
Linear Actuating Cylinder Assembly

013612428
9110-TA: RNCC: 3 | RNVC: 2
9110-TA: RNCC: 5 | RNVC: 2

11 Jul 1992

3040-01-361-0758
Remote Control Lever

013610758
29503631: RNCC: 3 | RNVC: 2
80035609: RNCC: 5 | RNVC: 2
29503631: RNCC: 5 | RNVC: 2
29503631: RNCC: 5 | RNVC: 2
29503631: RNCC: 5 | RNVC: 9
29503631: RNCC: C | RNVC: 1

8 Jul 1992

3040-01-361-8049
Rigid Connecting Link

013618049
12592207: RNCC: 3 | RNVC: 2

25 Jul 1992

3040-01-363-4362
Mechanical Drive Housing Part

013634362
3883492-1: RNCC: 3 | RNVC: 2
3883492: RNCC: D | RNVC: 9

29 Aug 1992

3040-01-365-7151
Shaft Retaining Plate

013657151
HU9831178: RNCC: 3 | RNVC: 2
2HL282: RNCC: 5 | RNVC: 2
2HL282: RNCC: 5 | RNVC: 9
HU00152504: RNCC: 5 | RNVC: 9
US00830942: RNCC: 5 | RNVC: 9
152504: RNCC: 5 | RNVC: 9

11 Oct 1992

3040-01-365-7779
Drive Assembly

013657779
DDE 23523996: RNCC: 3 | RNVC: 2
R23509200: RNCC: 5 | RNVC: 2
R23509200: RNCC: 5 | RNVC: 2
R23509200: RNCC: 5 | RNVC: 2
DDE R23509200: RNCC: 5 | RNVC: 9
23509200: RNCC: 5 | RNVC: 9
R23509200: RNCC: 5 | RNVC: 9

14 Oct 1992

3040-01-367-7595
Rigid Connecting Link

013677595
12553419: RNCC: 3 | RNVC: 2
12553419: RNCC: 5 | RNVC: 2
12553419: RNCC: 5 | RNVC: 2

18 Nov 1992

3040-01-370-0225
Linear Actuating Cylinder

013700225
6-372-004235: RNCC: 3 | RNVC: 2
6-372-004235: RNCC: 5 | RNVC: 2
6-372-004235: RNCC: 5 | RNVC: 2
6-372-004335: RNCC: 5 | RNVC: 9

11 Jan 1993

3040-01-316-0191
Linear Actuating Cylinder Assembly

013160191
A3280P9818: RNCC: 3 | RNVC: 2

1 Mar 1990

3040-01-316-0756
Rigid Connecting Link

013160756
4905-185: RNCC: 3 | RNVC: 2
75J618002-185: RNCC: 7 | RNVC: 2

2 Mar 1990

3040-01-316-0568
Counterbalance Weight

013160568
3755-8: RNCC: 3 | RNVC: 2
3755-8: RNCC: 5 | RNVC: 2
3040PL1014820: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-7287
Rigid Connecting Link

013167287
4066827: RNCC: 3 | RNVC: 2
4066827: RNCC: 5 | RNVC: 2
3040PL0668538: RNCC: 6 | RNVC: 9

14 Mar 1990

3040-01-317-5328
Shouldered Shaft

013175328
3599-096: RNCC: 3 | RNVC: 2
3599-096: RNCC: 5 | RNVC: 2
3599-096: RNCC: 5 | RNVC: 9

31 Mar 1990

3040-01-318-3719
Spur Gearshaft

013183719
3603685-2: RNCC: 3 | RNVC: 2

17 Apr 1990

3040-01-319-1009
Bell Crank

013191009
11450866-1: RNCC: 3 | RNVC: 2

1 May 1990

3040-01-319-2790
Control Cam

013192790
738032-31: RNCC: 3 | RNVC: 2

4 May 1990

3040-01-319-1485
Counterbalance Weight

013191485
4069003: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-1255
Counterbalance Weight

013191255
4068998: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-320-1527
Spur Gearshaft

013201527
2111007-210: RNCC: 3 | RNVC: 2

19 May 1990

3040-01-320-8769
Rigid Connecting Link

013208769
4075580-01: RNCC: 3 | RNVC: 2
3040PL0668596: RNCC: 6 | RNVC: 9

5 Jun 1990

3040-01-320-9432
Breather

013209432
P48328: RNCC: 3 | RNVC: 9
R431001598: RNCC: 5 | RNVC: 9

6 Jun 1990

3040-01-321-2286
Body Hub

013212286
1858767: RNCC: 3 | RNVC: 2

13 Jun 1990

3040-01-322-0023
Linear Actuating Cylinder Assembly

013220023
707-4750: RNCC: 3 | RNVC: 2
707-4750: RNCC: 3 | RNVC: 9
600-E-2146: RNCC: 5 | RNVC: 9

27 Jun 1990

3040-01-322-0986
Linear Actuating Cylinder Assembly

013220986
503360 AND 30728: RNCC: 3 | RNVC: 2
501163: RNCC: 5 | RNVC: 9
503360: RNCC: 5 | RNVC: 9
503360 AND 30728: RNCC: 5 | RNVC: 9
503361: RNCC: 5 | RNVC: 9

28 Jun 1990

3040-01-322-5822
Rigid Connecting Link

013225822
LJ1844: RNCC: 3 | RNVC: 2
H-2878 PIECE 58: RNCC: 5 | RNVC: 2

10 Jul 1990

3040-01-322-6306
Control Cam

013226306
3037-840: RNCC: 3 | RNVC: 2

11 Jul 1990

3040-01-323-1752
Shouldered Shaft

013231752
9341M62P01: RNCC: 3 | RNVC: 2

23 Jul 1990

3040-01-323-9122
Shouldered Shaft

013239122
1363M95P01: RNCC: 3 | RNVC: 2

5 Aug 1990

3040-01-324-2097
Spur Gearshaft

013242097
L1800183-017: RNCC: 3 | RNVC: 2
L1800183-017: RNCC: 5 | RNVC: 2

11 Aug 1990

3040-01-324-4438
Spur Gearshaft

013244438
1363M93P01: RNCC: 3 | RNVC: 2

19 Aug 1990

3040-01-324-7953
Shouldered Shaft

013247953
12553519: RNCC: 3 | RNVC: 2

22 Aug 1990

3040-01-325-2356
Straight Shaft

013252356
SW28444: RNCC: 3 | RNVC: 2
3040013252356: RNCC: 6 | RNVC: 9

31 Aug 1990

3040-01-328-0410
Shouldered Shaft

013280410
21E47-2: RNCC: 3 | RNVC: 2
21E47-2: RNCC: 5 | RNVC: 2
21E47-1: RNCC: E | RNVC: 8

26 Oct 1990

3040-01-328-3045
Shaft Retaining Plate

013283045
SK-6362-3 PIECE 2: RNCC: 3 | RNVC: 2
SK-6362-23 PIECE 2: RNCC: 5 | RNVC: 9

30 Oct 1990

3040-01-328-3279
Rigid Connecting Link

013283279
4077912: RNCC: 3 | RNVC: 2
4077912: RNCC: 5 | RNVC: 2
3040PL0669144: RNCC: 6 | RNVC: 9

30 Oct 1990

3040-01-328-8245
Bell Crank

013288245
4F54358-104B: RNCC: 3 | RNVC: 2
4F54358-104B: RNCC: 5 | RNVC: 9

7 Nov 1990

3040-01-331-0618
Linear Actuating Cylinder Piston

013310618
1D94410-001: RNCC: 3 | RNVC: 2
1130E15 PC17: RNCC: 5 | RNVC: 2

13 Dec 1990

3040-01-332-0074
Linear Actuating Cylinder Assembly Parts Kit

013320074
RE25151: RNCC: 3 | RNVC: 2
RE25151: RNCC: 5 | RNVC: 2
RE25151: RNCC: 5 | RNVC: 9

31 Dec 1990

3040-01-333-0541
Rigid Connecting Link

013330541
209-001-079-103: RNCC: 3 | RNVC: 2

21 Jan 1991

3040-01-333-2997
Remote Control Lever

013332997
UN0140: RNCC: 3 | RNVC: 2
701-149728-52: RNCC: 5 | RNVC: 9

30 Jan 1991

3040-01-336-8209
Mechanical Drive Housing

013368209
8928530: RNCC: 3 | RNVC: 2
2GH665: RNCC: 5 | RNVC: 2
2GH665: RNCC: 5 | RNVC: 9

3 Apr 1991

3040-01-337-4381
Body Hub

013374381
8922521: RNCC: 3 | RNVC: 2

14 Apr 1991

3040-01-337-7428
Linear Actuating Cylinder Assembly

013377428
ABP N83 318031: RNCC: 3 | RNVC: 2
80.618.00.009: RNCC: 5 | RNVC: 9
ABP N83 318093: RNCC: 5 | RNVC: 9
BOA/97847: RNCC: 5 | RNVC: 9
640015: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-338-2363
Manual Control Lever

013382363
1318417: RNCC: 3 | RNVC: 2
1318417: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-2237
Shouldered Shaft

013382237
82403617: RNCC: 3 | RNVC: 9
82403617: RNCC: 5 | RNVC: 2
82403617: RNCC: 5 | RNVC: 2
82403617: RNCC: 5 | RNVC: 2
82403617: RNCC: 5 | RNVC: 2
82403617: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-4578
Spur Gearshaft

013384578
167C2976-2: RNCC: 3 | RNVC: 2
167C2976: RNCC: D | RNVC: 9

4 May 1991

3040-01-338-4434
Shouldered Shaft

013384434
1843710: RNCC: 3 | RNVC: 2
1843710: RNCC: 5 | RNVC: 9

3 May 1991

3040-01-338-7606
Helical Gearshaft

013387606
1836480: RNCC: 3 | RNVC: 2
1836480: RNCC: 5 | RNVC: 9

10 May 1991

3040-01-340-1473
Linear Actuating Cylinder Cap

013401473
MA-977: RNCC: 3 | RNVC: 2

10 Jun 1991

3040-01-340-1609
Rigid Connecting Link

013401609
236710-1: RNCC: 3 | RNVC: 2
236710-1: RNCC: 5 | RNVC: 1
236710-1: RNCC: 5 | RNVC: 9

10 Jun 1991

3040-01-341-0143
Counterbalance Weight

013410143
2301021: RNCC: 3 | RNVC: 9
AS44522-070: RNCC: 5 | RNVC: 2
AS44522-070: RNCC: 5 | RNVC: 9
AS44522-070: RNCC: 5 | RNVC: 9
AS44522-070: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-341-2340
Piston Ring

013412340
T-560-0330-001: RNCC: 3 | RNVC: 2
60833AX: RNCC: 5 | RNVC: 2
60833AX: RNCC: 7 | RNVC: 9

26 Jun 1991

3040-01-341-1630
Brake Backing Plate

013411630
8-005-703-04: RNCC: 3 | RNVC: 2
8-005-7: RNCC: 3 | RNVC: 9
N1-087-602-B PC 5: RNCC: 5 | RNVC: 9

25 Jun 1991

3040-01-341-4989
Shouldered Shaft

013414989
6547C834-1: RNCC: 3 | RNVC: 2
6547C834: RNCC: D | RNVC: 9

1 Jul 1991

3040-01-341-5177
Rigid Connecting Link

013415177
206378: RNCC: 3 | RNVC: 2

1 Jul 1991

3040-01-342-8807
Bell Crank

013428807
A230287: RNCC: 3 | RNVC: 2
A240285 FIND 3: RNCC: 5 | RNVC: 2
A230287: RNCC: 5 | RNVC: 9
A240285: RNCC: D | RNVC: 9

31 Jul 1991

3040-01-343-8951
Housing Adapter

013438951
74A733120-2011: RNCC: 3 | RNVC: 2
3930AS713-1: RNCC: 5 | RNVC: 2
74A733120-2011: RNCC: 5 | RNVC: 2
74A733120-2011: RNCC: 5 | RNVC: 2
74A733120-2011: RNCC: 5 | RNVC: 2
3930AS713-1: RNCC: 5 | RNVC: 2
3930AS713-1: RNCC: 5 | RNVC: 2
3930AS713-1: RNCC: 5 | RNVC: 2
10107270: RNCC: 6 | RNVC: 9
3930AS713-1: RNCC: C | RNVC: 1

19 Aug 1991

3040-01-343-8952
Housing Adapter

013438952
74A733120-2012: RNCC: 3 | RNVC: 2
74A733120-2012: RNCC: 5 | RNVC: 2
3930AS713-2: RNCC: 5 | RNVC: 2
74A733120-2012: RNCC: 5 | RNVC: 2
10107272: RNCC: 6 | RNVC: 9

19 Aug 1991

3040-01-344-3978
Controllable Swashplate

013443978
741720: RNCC: 3 | RNVC: 2

28 Aug 1991

3040-01-345-5700
Shouldered Axle

013455700
1836400 U: RNCC: 3 | RNVC: 2
1836400 U: RNCC: 5 | RNVC: 9

21 Sep 1991

3040-01-348-2405
Rigid Connecting Link

013482405
4F54178-143B: RNCC: 3 | RNVC: 2
4F54178-143: RNCC: 5 | RNVC: 2
4F54178-143B: RNCC: 5 | RNVC: 9

6 Nov 1991

3040-01-348-9526
Shouldered Shaft

013489526
109183: RNCC: 3 | RNVC: 2
10107271: RNCC: 6 | RNVC: 9

19 Nov 1991

3040-01-349-7824
Shouldered Shaft

013497824
5-227 ITEM 15 5-39MIL1-1003: RNCC: 3 | RNVC: 2
5-39MIL1-1003-15: RNCC: 5 | RNVC: 2
5-39MIL1-1003-15: RNCC: 5 | RNVC: 9
5-227: RNCC: D | RNVC: 9

4 Dec 1991

3040-01-350-3835
Shouldered Shaft

013503835
3167332-5: RNCC: 3 | RNVC: 2
3167332: RNCC: 5 | RNVC: 1
3167332-5: RNCC: 5 | RNVC: 2
10107273: RNCC: 6 | RNVC: 9

14 Dec 1991

3040-01-350-3953
Bevel Gearshaft

013503953
1W0610: RNCC: 3 | RNVC: 2
1W610: RNCC: 5 | RNVC: 2

14 Dec 1991

3040-01-349-7394
Mechanical Drive Housing

013497394
12918135: RNCC: 3 | RNVC: 2
12918135: RNCC: 5 | RNVC: 9

3 Dec 1991

3040-01-350-9200
Cover And Grid Assy

013509200
0706740: RNCC: 3 | RNVC: 2
246667: RNCC: 5 | RNVC: 9

25 Dec 1991

3040-01-351-1611
Linear Actuating Cylinder Assembly Parts Kit

013511611
PMCK22000: RNCC: 3 | RNVC: 2

1 Jan 1992

3040-01-351-5916
Shaft Collar

013515916
424478-1: RNCC: 3 | RNVC: 2
424478: RNCC: D | RNVC: 9

11 Jan 1992

3040-01-351-5957
Control Cable Assembly

013515957
38013-003-78IN: RNCC: 3 | RNVC: 9
38013-003-78IN: RNCC: 5 | RNVC: 2
5104955 ITEM 30: RNCC: 5 | RNVC: 2
5104955: RNCC: D | RNVC: 9

11 Jan 1992

3040-01-352-9162
Push-Pull Control Assembly

013529162
301947-286(23FT): RNCC: 3 | RNVC: 2
CCX63323: RNCC: 5 | RNVC: 2
301947-003-23FT: RNCC: 5 | RNVC: 9

1 Feb 1992

3040-01-353-6613
Control Cam

013536613
0031-2077: RNCC: 3 | RNVC: 2
001-ALUM ACTUATOR: RNCC: 5 | RNVC: 2
001-HATCH-1524-H-AALR FIND 10: RNCC: 5 | RNVC: 2
001-HATCH-1524-H-AALR: RNCC: D | RNVC: 9

14 Feb 1992

3040-01-354-0534
Spur Gearshaft

013540534
803-5959307-X-065: RNCC: 3 | RNVC: 2
803-5959307: RNCC: D | RNVC: 9

21 Feb 1992

3040-01-354-8887
Rigid Connecting Link

013548887
4611-555: RNCC: 3 | RNVC: 2
17B9F1112-555: RNCC: 7 | RNVC: 2

6 Mar 1992

3040-01-355-0582
Linear Actuating Cylinder Assembly

013550582
13541275: RNCC: 3 | RNVC: 2
20TR12: RNCC: 5 | RNVC: 2

11 Mar 1992

3040-01-355-7657
Straight Shaft

013557657
12553286: RNCC: 3 | RNVC: 2
12553286: RNCC: 5 | RNVC: 2
12553286: RNCC: 5 | RNVC: 2

23 Mar 1992

3040-01-357-5050
Rigid Connecting Link

013575050
17P3A1755-501: RNCC: 3 | RNVC: 2

24 Apr 1992

3040-01-357-5851
Shouldered Shaft

013575851
53X-01-147: RNCC: 3 | RNVC: 2
53X-01-147: RNCC: 5 | RNVC: 9
53X-01-147: RNCC: 5 | RNVC: 9

27 Apr 1992

3040-01-358-8691
Spur Gearshaft

013588691
16275: RNCC: 3 | RNVC: 2
5938662: RNCC: 5 | RNVC: 2
3040PL0768135: RNCC: 6 | RNVC: 9

22 May 1992

3040-01-359-9651
Linear Actuating Cylinder Assembly Parts Kit

013599651
19012-203: RNCC: 3 | RNVC: 2
19012-203: RNCC: 5 | RNVC: 9

17 Jun 1992

3040-01-360-2403
Straight Shaft

013602403
1220D0382: RNCC: 3 | RNVC: 9
1220D0382: RNCC: C | RNVC: 1

20 Jun 1992

3040-01-360-5989
Linear Actuating Cylinder Assembly Parts Kit

013605989
57304834: RNCC: 3 | RNVC: 2
855017P0803: RNCC: 5 | RNVC: 9

28 Jun 1992

3040-01-361-0614
Mechanical Drive Housing

013610614
00-017019: RNCC: 3 | RNVC: 2
2FW842: RNCC: 5 | RNVC: 2
00-017019: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-362-3485
Piston Ring Set

013623485
S32152-343-99 PH: RNCC: 3 | RNVC: 2
A78093-343PH-99: RNCC: 5 | RNVC: 2
S32152-343-99 PH: RNCC: 5 | RNVC: 9
S32152: RNCC: D | RNVC: 9
A78093: RNCC: D | RNVC: 9

5 Aug 1992

3040-01-362-3508
Counterbalance Weight

013623508
186-6039: RNCC: 3 | RNVC: 2
186-6039: RNCC: 5 | RNVC: 2

5 Aug 1992

3040-01-363-1949
Control

013631949
SM-A-803686-1: RNCC: 3 | RNVC: 2

26 Aug 1992

3040-01-362-1838
Linear Actuating Cylinder

013621838
1771AS402-1: RNCC: 3 | RNVC: 2
1771AS402-1: RNCC: 5 | RNVC: 2
53101-00: RNCC: 5 | RNVC: 9
1771AS402: RNCC: 7 | RNVC: 2

1 Aug 1992

3040-01-364-2195
Remote Control Lever

013642195
14-017: RNCC: 3 | RNVC: 2
14-017: RNCC: 3 | RNVC: 9

14 Sep 1992

3040-01-364-2259
Droop Control Locking Cap

013642259
20355: RNCC: 3 | RNVC: 2
20355: RNCC: 5 | RNVC: 9
20355: RNCC: 5 | RNVC: 9

14 Sep 1992

3040-01-365-2729
Nonrotating Shaft Eye Bracket

013652729
MBEU147624: RNCC: 3 | RNVC: 2
MBEU147624: RNCC: 5 | RNVC: 2

4 Oct 1992

3040-01-365-9155
Shouldered Shaft

013659155
803-5959218 PIECE 45: RNCC: 3 | RNVC: 2

19 Oct 1992

3040-01-366-7221
Shaft Collar

013667221
6086210: RNCC: 3 | RNVC: 2

1 Nov 1992

3040-01-366-7250
Mechanical Drive Housing

013667250
6086274: RNCC: 3 | RNVC: 2

1 Nov 1992

3040-01-366-7315
Worm Shaft

013667315
12950926: RNCC: 3 | RNVC: 2

1 Nov 1992

3040-01-368-7671
Linear Actuating Cylinder Assembly

013687671
126-900-065: RNCC: 3 | RNVC: 2
126-000-065 W/STOP: RNCC: 5 | RNVC: 9
126-000-065 W/STOP: RNCC: 5 | RNVC: 9
126-000-065/503: RNCC: 5 | RNVC: 9
126-000-065/404: RNCC: 5 | RNVC: 9

8 Dec 1992

3040-01-370-1351
Shouldered Shaft

013701351
6-689-001667: RNCC: 3 | RNVC: 2
6-689-001667: RNCC: 5 | RNVC: 2
6-689-001667: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-370-1397
Linear Actuating Cylinder Piston Rod

013701397
6-768-002484: RNCC: 3 | RNVC: 2
6-768-002484: RNCC: 5 | RNVC: 2
6-768-002484: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-329-2572
Rigid Connecting Link

013292572
740200-13: RNCC: 3 | RNVC: 2
740200: RNCC: D | RNVC: 9

14 Nov 1990

3040-01-329-9878
Shouldered Shaft

013299878
ER-62793: RNCC: 3 | RNVC: 2
ER-62793: RNCC: 5 | RNVC: 2
ER-62793: RNCC: 5 | RNVC: 2
ER-62793: RNCC: 5 | RNVC: 9
ER-62793: RNCC: 5 | RNVC: 9

28 Nov 1990

3040-01-329-9926
Mechanical Drive Housing

013299926
A-3226-R-1006: RNCC: 3 | RNVC: 2
A-3226-R-1006: RNCC: 5 | RNVC: 2
1656924C91: RNCC: 5 | RNVC: 2

28 Nov 1990

3040-01-316-9686
Shouldered Shaft

013169686
P33325: RNCC: 3 | RNVC: 2
P33325-SN8931000351: RNCC: 5 | RNVC: 2
P33325-SN8931000332: RNCC: 5 | RNVC: 2

19 Mar 1990

3040-01-319-1257
Counterbalance Weight

013191257
4069002: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-1258
Counterbalance Weight

013191258
4069995: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-8959
Bell Crank

013198959
2677198: RNCC: 3 | RNVC: 2

16 May 1990

3040-01-320-1784
Linear Actuating Cylinder Assembly

013201784
5-51903: RNCC: 3 | RNVC: 2
1910830: RNCC: 5 | RNVC: 9

22 May 1990

3040-01-320-4260
Rigid Connecting Link

013204260
4071328: RNCC: 3 | RNVC: 2
4071328: RNCC: 5 | RNVC: 2
4071328: RNCC: 5 | RNVC: 9
3040PL0668556: RNCC: 6 | RNVC: 9

24 May 1990

3040-01-320-4716
Rigid Connecting Link

013204716
4075589-01: RNCC: 3 | RNVC: 2
4075589-01: RNCC: 5 | RNVC: 2
3040PL0668591: RNCC: 6 | RNVC: 9

25 May 1990

3040-01-320-5525
Rigid Connecting Link

013205525
4075592-01: RNCC: 3 | RNVC: 2
3040PL0668593: RNCC: 6 | RNVC: 9

26 May 1990

3040-01-320-9507
Rigid Connecting Link

013209507
4071186-01: RNCC: 3 | RNVC: 2
3040PL0668953: RNCC: 6 | RNVC: 9

6 Jun 1990

3040-01-320-9508
Rigid Connecting Link

013209508
4075586-01: RNCC: 3 | RNVC: 2
3040PL0668966: RNCC: 6 | RNVC: 9

6 Jun 1990

3040-01-321-8321
Shouldered Shaft

013218321
12553403: RNCC: 3 | RNVC: 2

23 Jun 1990

3040-01-322-5261
Shouldered Shaft

013225261
789770-2: RNCC: 3 | RNVC: 2

9 Jul 1990

3040-01-322-5784
Manual Control Lever

013225784
7N9942: RNCC: 3 | RNVC: 2

10 Jul 1990

3040-01-322-6307
Control Cam

013226307
3034-348: RNCC: 3 | RNVC: 2

11 Jul 1990

3040-01-322-9694
Rigid Connecting Link

013229694
12553397-2: RNCC: 3 | RNVC: 2

17 Jul 1990

3040-01-323-3261
Shouldered Shaft

013233261
23505896: RNCC: 3 | RNVC: 2
DDE 23505896: RNCC: 5 | RNVC: 2

26 Jul 1990

3040-01-323-5211
Rigid Connecting Link

013235211
12553637: RNCC: 3 | RNVC: 2

28 Jul 1990

3040-01-323-9129
Counterbalance Weight

013239129
1522M76P03: RNCC: 3 | RNVC: 2
15522M76P03: RNCC: E | RNVC: 8
9528M59P02: RNCC: E | RNVC: 8

5 Aug 1990

3040-01-324-0752
Rigid Connecting Link

013240752
3342820-1: RNCC: 3 | RNVC: 2
3314875-1: RNCC: 5 | RNVC: 9
3040PL1014834: RNCC: 6 | RNVC: 9

9 Aug 1990

3040-01-323-5210
Body Hub

013235210
12553274: RNCC: 3 | RNVC: 2

28 Jul 1990

3040-01-325-2143
Control Cam

013252143
3037-683: RNCC: 3 | RNVC: 2

30 Aug 1990

3040-01-324-9400
Nonrotating Shaft Eye Bracket

013249400
SW28835: RNCC: 3 | RNVC: 2

25 Aug 1990

3040-01-325-2162
Linear Actuating Cylinder Assembly

013252162
2198032-2: RNCC: 3 | RNVC: 2
2198032-2: RNCC: 5 | RNVC: 1
2198032-2: RNCC: 5 | RNVC: 9

30 Aug 1990

3040-01-325-4078
Straight Shaft

013254078
7002596-2: RNCC: 3 | RNVC: 2
7002596-2: RNCC: 3 | RNVC: 9
10107026: RNCC: 6 | RNVC: 9

4 Sep 1990

3040-01-326-3188
Rigid Connecting Link

013263188
430075 ITEM 13: RNCC: 3 | RNVC: 2
227200: RNCC: C | RNVC: 1

21 Sep 1990

3040-01-326-9121
Shouldered Shaft

013269121
21607: RNCC: 3 | RNVC: 2

3 Oct 1990

3040-01-327-0486
Push-Pull Control Assembly

013270486
FLD/65112 60: RNCC: 3 | RNVC: 2
65112-60: RNCC: 5 | RNVC: 2
ARL65112-60: RNCC: 5 | RNVC: 2
65112-60: RNCC: 5 | RNVC: 9

5 Oct 1990

3040-01-327-0532
Spline Adapter

013270532
2165901: RNCC: 3 | RNVC: 2
2165901: RNCC: 5 | RNVC: 1

5 Oct 1990

3040-01-327-5253
Straight Shaft

013275253
12353606-1: RNCC: 3 | RNVC: 2
12353606: RNCC: D | RNVC: 9

16 Oct 1990

3040-01-327-9444
Manual Control Lever

013279444
12347348: RNCC: 3 | RNVC: 2

25 Oct 1990

3040-01-328-2884
Shouldered Shaft

013282884
2227050-11: RNCC: 3 | RNVC: 2
2227050-11: RNCC: 5 | RNVC: 1
2227050-11: RNCC: 5 | RNVC: 9
2227050: RNCC: D | RNVC: 9

30 Oct 1990

3040-01-328-6441
Control Cam

013286441
3152711: RNCC: 3 | RNVC: 2
3152711: RNCC: 5 | RNVC: 2
350591: RNCC: 5 | RNVC: 9
350591: RNCC: 5 | RNVC: 9
3152711: RNCC: 5 | RNVC: 9

6 Nov 1990

3040-01-329-2467
Straight Shaft

013292467
123AMM42126-1: RNCC: 3 | RNVC: 2
123AMM42126-1: RNCC: 5 | RNVC: 2
123AMM42126-1: RNCC: 5 | RNVC: 9
123AMM42126: RNCC: D | RNVC: 9

13 Nov 1990

3040-01-332-0072
Linear Actuating Cylinder Assembly Parts Kit

013320072
RE20433: RNCC: 3 | RNVC: 2
RE20433: RNCC: 5 | RNVC: 2
RE20433: RNCC: 5 | RNVC: 9

31 Dec 1990

3040-01-333-5932
Bevel Gearshaft

013335932
214-040-047-103: RNCC: 3 | RNVC: 2
214-040-047: RNCC: D | RNVC: 9

6 Feb 1991

3040-01-333-5939
Rigid Connecting Link

013335939
58810: RNCC: 3 | RNVC: 2

6 Feb 1991

3040-01-337-2053
Shaft Collar

013372053
509041: RNCC: 3 | RNVC: 2
509041: RNCC: 5 | RNVC: 9

11 Apr 1991

3040-01-337-5202
Worm Wheel Gearshaft

013375202
01-435-0405-4 ITEM 17: RNCC: 3 | RNVC: 2
60-420-0149-1: RNCC: 5 | RNVC: 2
01-435-0405-4: RNCC: D | RNVC: 9

16 Apr 1991

3040-01-338-2371
Linear Actuating Cylinder Piston Rod

013382371
C561664: RNCC: 3 | RNVC: 2
1324920: RNCC: 5 | RNVC: 2
1324920: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-2546
Remote Control Lever

013382546
3912635: RNCC: 3 | RNVC: 2
1 422 002 216: RNCC: 3 | RNVC: 2
2912635: RNCC: 5 | RNVC: 9

28 Apr 1991

3040-01-338-3011
Multiple Gears Gearshaft

013383011
203713: RNCC: 3 | RNVC: 2

30 Apr 1991

3040-01-338-3937
Shouldered Shaft

013383937
3505607 PC 23: RNCC: 3 | RNVC: 2
3502479-7: RNCC: 5 | RNVC: 2
3505607: RNCC: D | RNVC: 9

3 May 1991

3040-01-338-6278
Shouldered Shaft

013386278
114R3053-10: RNCC: 3 | RNVC: 2

8 May 1991

3040-01-339-9242
Counterbalance Weight

013399242
4070419CL1: RNCC: 3 | RNVC: 2
4070419CL1: RNCC: 5 | RNVC: 2

4 Jun 1991

3040-01-340-1466
Brake Disc

013401466
15222003-003: RNCC: 3 | RNVC: 2
15222003-003: RNCC: 5 | RNVC: 9
15222003-005: RNCC: 5 | RNVC: 9
15222003-003: RNCC: 5 | RNVC: 9

10 Jun 1991

3040-01-340-5916
Shouldered Shaft

013405916
9356135: RNCC: 3 | RNVC: 2

17 Jun 1991

3040-01-340-9828
Control Cam

013409828
150-300-100-792-000: RNCC: 3 | RNVC: 2

23 Jun 1991

3040-01-341-0138
Counterbalance Weight

013410138
2301004: RNCC: 3 | RNVC: 2
AS44520-040: RNCC: 5 | RNVC: 2
AS44520-040: RNCC: 5 | RNVC: 9
AS44520-040: RNCC: 5 | RNVC: 9
AS44520 THRU 23: RNCC: 5 | RNVC: 9
AS44520-040: RNCC: 5 | RNVC: 9
AS44520-040: RNCC: 5 | RNVC: 9

23 Jun 1991

3040-01-340-7102
Counterbalance Weight

013407102
2301000: RNCC: 3 | RNVC: 2
AS44520-005: RNCC: 5 | RNVC: 2
AS44520-005: RNCC: 5 | RNVC: 9
AS44520-005: RNCC: 5 | RNVC: 9
AS44520-005: RNCC: 5 | RNVC: 9
AS44520-005: RNCC: 5 | RNVC: 9

19 Jun 1991

3040-01-341-7598
Straight Shaft

013417598
6197553: RNCC: 3 | RNVC: 2
6197530 PART 17: RNCC: 5 | RNVC: 2
6197530: RNCC: D | RNVC: 9

7 Jul 1991

3040-01-342-2915
Piston Ring Set

013422915
43537: RNCC: 3 | RNVC: 2

18 Jul 1991

3040-01-343-0704
Control Cam

013430704
3035-450: RNCC: 3 | RNVC: 2
3035-450: RNCC: 5 | RNVC: 2
3035-450: RNCC: 5 | RNVC: 2

4 Aug 1991

3040-01-343-3659
Linear Actuating Cylinder Assembly Parts Kit

013433659
L045610000: RNCC: 3 | RNVC: 2

12 Aug 1991

3040-01-343-3425
Remote Control Lever

013433425
12592621: RNCC: 3 | RNVC: 2

10 Aug 1991

3040-01-343-6749
Receiver-Transmitter Subassembly

013436749
10065549-101: RNCC: 3 | RNVC: 2
10065549-101: RNCC: 3 | RNVC: 2

15 Aug 1991

3040-01-344-5770
Counterbalance Weight

013445770
335-014-407-0: RNCC: 3 | RNVC: 2

31 Aug 1991

3040-01-345-0787
Helical Gearshaft

013450787
1888550 U: RNCC: 3 | RNVC: 2
1888550 U: RNCC: 5 | RNVC: 9

11 Sep 1991

3040-01-345-8385
Straight Shaft

013458385
45102: RNCC: 3 | RNVC: 9
45102: RNCC: C | RNVC: 1

24 Sep 1991

3040-01-346-0098
Flexible Shaft Assembly Casing

013460098
2600207-107: RNCC: 3 | RNVC: 2

25 Sep 1991

3040-01-346-0730
Worm Shaft

013460730
906010PL FIND 6 A10: RNCC: 3 | RNVC: 9
810210A10: RNCC: 5 | RNVC: 9
810210PL ASSY 810210-10: RNCC: 5 | RNVC: 9
810210PL ASSY 810210-10: RNCC: C | RNVC: 1
810210A10: RNCC: C | RNVC: 1
906010PL FIND 6 A10: RNCC: C | RNVC: 1
906010: RNCC: D | RNVC: 9

26 Sep 1991

3040-01-352-2416
Rigid Connecting Link

013522416
B511624: RNCC: 3 | RNVC: 9
B511624: RNCC: 5 | RNVC: 2
B511624: RNCC: 5 | RNVC: 9

23 Jan 1992

3040-01-352-1915
Shoe Type Brake

013521915
6607521 ITEM 3: RNCC: 3 | RNVC: 2

22 Jan 1992

3040-01-353-7636
Nonrotating Shaft Eye Bracket

013537636
12370804: RNCC: 3 | RNVC: 2
12370804: RNCC: 5 | RNVC: 2
12370804: RNCC: 5 | RNVC: 2
12370804: RNCC: 5 | RNVC: 9
12370804: RNCC: 5 | RNVC: 9

15 Feb 1992

3040-01-356-1683
Shaft Retaining Plate

013561683
520245-1: RNCC: 3 | RNVC: 2

30 Mar 1992

3040-01-356-8670
Straight Shaft

013568670
3117-3488-010: RNCC: 3 | RNVC: 2
PL 3117-3495-000 SEQ 3: RNCC: 5 | RNVC: 2
3117-3488-010: RNCC: 5 | RNVC: 9
PL 3117-3495-000 SEQ 3: RNCC: 5 | RNVC: 9
3117-3488-010: RNCC: C | RNVC: 1
PL 3117-3495-000 SEQ 3: RNCC: C | RNVC: 1

12 Apr 1992

3040-01-358-6143
Straight Shaft

013586143
5122105-017-3: RNCC: 3 | RNVC: 2

16 May 1992

3040-01-358-8709
Rigid Connecting Link

013588709
ALBK04-1001: RNCC: 3 | RNVC: 2
4D0100-1: RNCC: 5 | RNVC: 2
LREP4-2: RNCC: 5 | RNVC: 9
ALBK04-1001P: RNCC: C | RNVC: 1
4D0100: RNCC: D | RNVC: 9

22 May 1992

3040-01-359-2462
Shouldered Shaft

013592462
3-M-1: RNCC: 3 | RNVC: 2
3040PL0838198: RNCC: 6 | RNVC: 9

1 Jun 1992

3040-01-359-2463
Shouldered Shaft

013592463
SW34181: RNCC: 3 | RNVC: 2
SW32709: RNCC: 5 | RNVC: 9

1 Jun 1992

3040-01-360-2404
Shouldered Shaft

013602404
5267929: RNCC: 3 | RNVC: 2

20 Jun 1992

3040-01-360-5990
Linear Actuating Cylinder Assembly Parts Kit

013605990
855017P0802: RNCC: 3 | RNVC: 2
2657304826: RNCC: 5 | RNVC: 2

28 Jun 1992

3040-01-360-6350
Mechanical Drive Housing

013606350
29507833: RNCC: 3 | RNVC: 2
29507833: RNCC: 5 | RNVC: 2
29507833: RNCC: 5 | RNVC: 2
29507833: RNCC: 5 | RNVC: 9
29507833: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-361-0570
Straight Shaft

013610570
29507838: RNCC: 3 | RNVC: 2
29507838: RNCC: 5 | RNVC: 2
29507838: RNCC: 5 | RNVC: 2

8 Jul 1992

3040-01-361-0615
Mechanical Drive Housing

013610615
7E6366: RNCC: 3 | RNVC: 2
7E6366: RNCC: 5 | RNVC: 9
3040013610615: RNCC: 6 | RNVC: 9

8 Jul 1992

3040-01-362-3486
Piston Ring Set

013623486
S32152-338-99 PH: RNCC: 3 | RNVC: 2
A78093-338PH-99: RNCC: 5 | RNVC: 2
S32152-338-99 PH: RNCC: 5 | RNVC: 9
S32152: RNCC: D | RNVC: 9
A78093: RNCC: D | RNVC: 9

5 Aug 1992

3040-01-363-2334
Shouldered Shaft

013632334
3862939-1: RNCC: 3 | RNVC: 2
3862939: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-2768
Remote Control Lever

013632768
4477-054: RNCC: 3 | RNVC: 2

27 Aug 1992

3040-01-365-3026
Multiple Disk Brake

013653026
56P45-07: RNCC: 3 | RNVC: 2
2B8-05411: RNCC: 5 | RNVC: 2
2D3-03458: RNCC: 5 | RNVC: 9

5 Oct 1992

3040-01-365-7929
Shouldered Shaft

013657929
MBEU145897: RNCC: 3 | RNVC: 2
MBEU145897: RNCC: 5 | RNVC: 2

14 Oct 1992

3040-01-365-7031
Brake Band And Lining

013657031
5D1-03044: RNCC: 3 | RNVC: 2

11 Oct 1992

3040-01-365-9172
Hydraulic Accumulator Bladder

013659172
E703001: RNCC: 3 | RNVC: 2
700405: RNCC: 5 | RNVC: 9
703001: RNCC: 5 | RNVC: 9

19 Oct 1992

3040-01-366-3966
Control Cam

013663966
5009291: RNCC: 3 | RNVC: 2

24 Oct 1992

3040-01-366-5295
Manual Control Lever

013665295
715166-A00: RNCC: 3 | RNVC: 2
715166-A: RNCC: 5 | RNVC: 9

28 Oct 1992

3040-01-366-7224
Shouldered Shaft

013667224
514296: RNCC: 3 | RNVC: 2

1 Nov 1992

3040-01-367-4676
Push-Pull Control Assembly

013674676
VE-527-WAP: RNCC: 3 | RNVC: 2

13 Nov 1992

3040-01-368-0085
Linear Actuating Cylinder Assembly

013680085
SW24723: RNCC: 3 | RNVC: 2
8803-023: RNCC: 5 | RNVC: 9
SW24723: RNCC: 5 | RNVC: 9

23 Nov 1992

3040-01-368-7598
Straight Shaft

013687598
30528-1: RNCC: 3 | RNVC: 2

8 Dec 1992

3040-01-369-3578
Remote Control Lever

013693578
12384658: RNCC: 3 | RNVC: 2

22 Dec 1992

3040-01-369-3576
Bell Crank

013693576
12384659-1: RNCC: 3 | RNVC: 2

22 Dec 1992

3040-01-369-9324
Remote Control Lever

013699324
1-422-013-091: RNCC: 3 | RNVC: 2

8 Jan 1993

3040-01-370-0221
Linear Actuating Cylinder Head

013700221
6-372-003478: RNCC: 3 | RNVC: 2
6-372-003478: RNCC: 5 | RNVC: 2
6-372-003478: RNCC: 5 | RNVC: 2
6-372-003478: RNCC: 5 | RNVC: 9

11 Jan 1993

3040-01-370-0218
Linear Actuating Cylinder Piston

013700218
6-701-000953: RNCC: 3 | RNVC: 9
6-701-000953: RNCC: 5 | RNVC: 2
6-701-000953: RNCC: 5 | RNVC: 2
6-701-000953: RNCC: 5 | RNVC: 2
6-701-000953: RNCC: 5 | RNVC: 9

11 Jan 1993

3040-01-370-1392
Linear Actuating Cylinder Piston

013701392
6-701-000955: RNCC: 3 | RNVC: 2
6-701-000955: RNCC: 5 | RNVC: 2
6-701-000955: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-316-0565
Counterbalance Weight

013160565
3755-5: RNCC: 3 | RNVC: 2
3755-5: RNCC: 5 | RNVC: 2
3040PL0928064: RNCC: 6 | RNVC: 9

2 Mar 1990

3040-01-316-3091
Limit Assembly Gear

013163091
83763: RNCC: 3 | RNVC: 2
83687 ITEM 24: RNCC: C | RNVC: 1

8 Mar 1990

3040-01-316-6987
Body Hub

013166987
12361748: RNCC: 3 | RNVC: 2

13 Mar 1990

3040-01-316-4172
Shouldered Shaft

013164172
3332994-1: RNCC: 3 | RNVC: 9
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 2
3332994-1: RNCC: 5 | RNVC: 9
3332994-1: RNCC: C | RNVC: 1

8 Mar 1990

3040-01-316-7741
Brake Shoe

013167741
510959: RNCC: 3 | RNVC: 2

16 Mar 1990

3040-01-317-0272
Rigid Connecting Link

013170272
4073157: RNCC: 3 | RNVC: 2

21 Mar 1990

3040-01-317-2779
Straight Shaft

013172779
JCM-14682-001: RNCC: 3 | RNVC: 2
JCM-14682: RNCC: D | RNVC: 9

27 Mar 1990

3040-01-317-5365
Control Cam

013175365
3037-641: RNCC: 3 | RNVC: 2
X83470-151: RNCC: 5 | RNVC: 2

31 Mar 1990

3040-01-319-1487
Counterbalance Weight

013191487
4071747: RNCC: 3 | RNVC: 2

2 May 1990

3040-01-319-7495
Straight Shaft

013197495
700079: RNCC: 3 | RNVC: 2

13 May 1990

3040-01-321-4490
Shouldered Shaft

013214490
B65889-01: RNCC: 3 | RNVC: 2
PL-30451-01 ITEM 5: RNCC: 5 | RNVC: 2
65889-01: RNCC: C | RNVC: 1
65889: RNCC: D | RNVC: 9

19 Jun 1990

3040-01-321-4672
Remote Control Lever

013214672
20428-440: RNCC: 3 | RNVC: 2
20428-002 FIND 3: RNCC: 5 | RNVC: 9
20428-002: RNCC: D | RNVC: 9

19 Jun 1990

3040-01-321-8337
Shouldered Shaft Assembly

013218337
5544106: RNCC: 3 | RNVC: 2
5544106: RNCC: 5 | RNVC: 2

23 Jun 1990

3040-01-322-9693
Rigid Connecting Link

013229693
12553397-1: RNCC: 3 | RNVC: 2

17 Jul 1990

3040-01-322-9999
Bell Crank

013229999
1286M29G01: RNCC: 3 | RNVC: 2
1286M29G02: RNCC: 5 | RNVC: 2

18 Jul 1990

3040-01-323-8663
Straight Shaft

013238663
3825156-1: RNCC: 3 | RNVC: 2
382156-1: RNCC: 5 | RNVC: 1
3825156-1: RNCC: 5 | RNVC: 2
3825156-1: RNCC: 5 | RNVC: 9
10107022: RNCC: 6 | RNVC: 9
3825156-1: RNCC: C | RNVC: 1
3825156: RNCC: D | RNVC: 9
3825156-10019: RNCC: D | RNVC: 9

5 Aug 1990

3040-01-324-0887
Mechanical Drive Housing

013240887
GRD24606: RNCC: 3 | RNVC: 2
GRD24606: RNCC: 5 | RNVC: 2
GRD24606: RNCC: 5 | RNVC: 9
GRD24606: RNCC: 5 | RNVC: 9
GRD24606: RNCC: C | RNVC: 1

10 Aug 1990

3040-01-324-9190
Shouldered Shaft

013249190
12553402: RNCC: 3 | RNVC: 2

24 Aug 1990

3040-01-325-6339
Rigid Connecting Link

013256339
4F23660-139A: RNCC: 3 | RNVC: 2

7 Sep 1990

3040-01-325-6348
Rigid Connecting Link

013256348
4C63130-101C: RNCC: 3 | RNVC: 2

7 Sep 1990

3040-01-325-8079
Spur Gearshaft

013258079
749418: RNCC: 3 | RNVC: 2

11 Sep 1990

3040-01-326-3107
Mechanical Drive Housing

013263107
4258-042: RNCC: 3 | RNVC: 2

21 Sep 1990

3040-01-327-5006
Control Cam

013275006
2676471: RNCC: 3 | RNVC: 2

16 Oct 1990

3040-01-327-6001
Control Cam

013276001
2676014: RNCC: 3 | RNVC: 2

17 Oct 1990

3040-01-328-0653
Rigid Connecting Link

013280653
12361444: RNCC: 3 | RNVC: 2
12361444: RNCC: 5 | RNVC: 2
12361444: RNCC: 5 | RNVC: 2
12361444: RNCC: 5 | RNVC: 2

26 Oct 1990

3040-01-329-0968
Brake Shoe

013290968
330010: RNCC: 3 | RNVC: 2
001505T: RNCC: 5 | RNVC: 2
330010: RNCC: C | RNVC: 1
120556: RNCC: D | RNVC: 9

11 Nov 1990

3040-01-329-1471
Bevel Gearshaft

013291471
C-12173-2: RNCC: 3 | RNVC: 2
C-12173-2: RNCC: 5 | RNVC: 9

11 Nov 1990

3040-01-330-4978
Straight Shaft

013304978
AE84831R ITEM 8: RNCC: 3 | RNVC: 2
AE18762-002: RNCC: 5 | RNVC: 2

4 Dec 1990

3040-01-330-8262
Body Hub

013308262
20-X-1815: RNCC: 3 | RNVC: 2
20-X-1815: RNCC: 5 | RNVC: 2
3040013308262: RNCC: 6 | RNVC: 9
4-60119BA-S: RNCC: D | RNVC: 9

9 Dec 1990

3040-01-330-7951
Remote Control Lever

013307951
4F14229-103A: RNCC: 3 | RNVC: 2
4F14229-103A: RNCC: 5 | RNVC: 9

8 Dec 1990

3040-01-331-4872
Control Cam

013314872
3825070-1: RNCC: 3 | RNVC: 2
3825070-1: RNCC: 5 | RNVC: 2
3825070-1: RNCC: 5 | RNVC: 9
10107029: RNCC: 6 | RNVC: 9

20 Dec 1990

3040-01-332-1669
Rigid Connecting Link

013321669
495-300220-1: RNCC: 3 | RNVC: 2
495-300220-1: RNCC: 5 | RNVC: 9
495-300220-1: RNCC: 5 | RNVC: 9
495-300220-1: RNCC: 5 | RNVC: 9
495-300220: RNCC: D | RNVC: 9

5 Jan 1991

3040-01-332-5830
Shouldered Shaft

013325830
4079-41133-01: RNCC: 3 | RNVC: 2
4079-41133-01: RNCC: 5 | RNVC: 2
4079-41133-01: RNCC: 5 | RNVC: 2

12 Jan 1991

3040-01-335-4244
Shouldered Shaft

013354244
9778CU: RNCC: 3 | RNVC: 2

8 Mar 1991

3040-01-336-5609
Rigid Connecting Link

013365609
12351511: RNCC: 3 | RNVC: 2
12351511: RNCC: 5 | RNVC: 9

27 Mar 1991

3040-01-336-8217
Linear Actuating Cylinder Piston

013368217
23017260: RNCC: 3 | RNVC: 2

3 Apr 1991

3040-01-337-7384
Linear Actuating Cylinder Piston Rod

013377384
289967: RNCC: 3 | RNVC: 2
289967: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-337-7572
Rigid Connecting Link

013377572
75A326692-1001: RNCC: 3 | RNVC: 2
75A326692-1001: RNCC: 5 | RNVC: 2
75A326692-1001: RNCC: 5 | RNVC: 9
75A326692-1001: RNCC: 5 | RNVC: 9

21 Apr 1991

3040-01-338-2560
Flexible Drive Shaft

013382560
A22-39656-146: RNCC: 3 | RNVC: 2
A22-33040-046: RNCC: 5 | RNVC: 9
A22-33040: RNCC: D | RNVC: 9

28 Apr 1991

3040-01-338-7521
Shouldered Shaft

013387521
1693480: RNCC: 3 | RNVC: 2
1693480: RNCC: 5 | RNVC: 9

10 May 1991

3040-01-339-0419
Shouldered Shaft

013390419
742407: RNCC: 3 | RNVC: 2

15 May 1991

3040-01-339-3513
Shouldered Shaft

013393513
742440 S: RNCC: 3 | RNVC: 2
742440: RNCC: 5 | RNVC: 9

21 May 1991

3040-01-339-3546
Pivot Shaft Assembly

013393546
6532B113-1: RNCC: 3 | RNVC: 2
6532B113: RNCC: D | RNVC: 9

21 May 1991

3040-01-339-6818
Linear Actuating Cylinder Piston Rod

013396818
704-6294478-4: RNCC: 3 | RNVC: 2
704-6294478-4: RNCC: 3 | RNVC: 2
704-6294478: RNCC: D | RNVC: 9

28 May 1991

3040-01-340-0213
Bevel Gearshaft

013400213
2677651: RNCC: 3 | RNVC: 2
2677651: RNCC: 5 | RNVC: 2
2677651: RNCC: 5 | RNVC: 9

6 Jun 1991

3040-01-341-8614
Control Cam

013418614
6546C027-1: RNCC: 3 | RNVC: 2
6546C027-1: RNCC: 5 | RNVC: 2
6546C027: RNCC: 5 | RNVC: 2

10 Jul 1991

3040-01-341-8630
Linear Actuating Cylinder Assembly

013418630
19009A0620: RNCC: 3 | RNVC: 2
82A5052A0569: RNCC: 5 | RNVC: 9

10 Jul 1991

3040-01-342-6801
Shaft Collar

013426801
12591450: RNCC: 3 | RNVC: 2

29 Jul 1991

3040-01-342-8967
Rigid Connecting Link

013428967
A02R2853-2: RNCC: 3 | RNVC: 2

1 Aug 1991

3040-01-342-0623
Shouldered Shaft

013420623
6547B044-1: RNCC: 3 | RNVC: 2
6547B044: RNCC: D | RNVC: 9

14 Jul 1991

3040-01-343-3307
Shaft Collar

013433307
17090-1: RNCC: 3 | RNVC: 2

10 Aug 1991

3040-01-343-2608
Shouldered Shaft

013432608
541-1101-04: RNCC: 3 | RNVC: 2
10107276: RNCC: 6 | RNVC: 9

9 Aug 1991

3040-01-344-2728
Gear Plate Assembly

013442728
NYLC1451: RNCC: 3 | RNVC: 2

27 Aug 1991

3040-01-344-2827
V Casing Assy Pallet Latch Control

013442827
2600206-101: RNCC: 3 | RNVC: 2

27 Aug 1991

3040-01-344-9343
Control Cam

013449343
12592628: RNCC: 3 | RNVC: 2

8 Sep 1991

3040-01-345-0548
Shaft Retaining Plate

013450548
12347351: RNCC: 3 | RNVC: 2
12347351: RNCC: 5 | RNVC: 2

11 Sep 1991

3040-01-345-6744
Shouldered Shaft

013456744
108866: RNCC: 3 | RNVC: 2
10107259: RNCC: 6 | RNVC: 9

23 Sep 1991

3040-01-346-5390
Rigid Connecting Link

013465390
101276-1: RNCC: 3 | RNVC: 2

8 Oct 1991

3040-01-348-1594
Linear Actuating Cylinder Assembly

013481594
16619C: RNCC: 3 | RNVC: 2
A-8691: RNCC: 5 | RNVC: 9

5 Nov 1991

3040-01-348-3902
Control Cam

013483902
406-071-110-103: RNCC: 3 | RNVC: 2
406-071-110-103: RNCC: 5 | RNVC: 2
406-071-110: RNCC: D | RNVC: 9

8 Nov 1991

3040-01-348-5878
Shouldered Shaft

013485878
A3156843-001: RNCC: 3 | RNVC: 2
A3156843-001: RNCC: 5 | RNVC: 2

13 Nov 1991

3040-01-349-8696
Rigid Connecting Link

013498696
5058T65P01: RNCC: 3 | RNVC: 2
178293-X: RNCC: 5 | RNVC: 2
HTLK4-4: RNCC: 5 | RNVC: 2
10159295: RNCC: 6 | RNVC: 9
5058T65: RNCC: D | RNVC: 9
5058T27G01: RNCC: E | RNVC: 8

5 Dec 1991

3040-01-351-4532
Pawl

013514532
A3131372: RNCC: 3 | RNVC: 2
A3131372: RNCC: 5 | RNVC: 9
A3131372: RNCC: 5 | RNVC: 9

9 Jan 1992

3040-01-352-7020
Shaft Idler

013527020
748720: RNCC: 3 | RNVC: 2

30 Jan 1992

3040-01-353-8552
Spur Gearshaft

013538552
40A2019: RNCC: 3 | RNVC: 2

19 Feb 1992

3040-01-354-6210
Shaft Retaining Plate

013546210
520248-1: RNCC: 3 | RNVC: 2

2 Mar 1992

3040-01-354-5567
Rigid Connecting Link

013545567
1728070: RNCC: 3 | RNVC: 2
ML11-22.31: RNCC: 5 | RNVC: 2
L1/3B4/3/22.31: RNCC: 5 | RNVC: 9
1728070: RNCC: 5 | RNVC: 9

29 Feb 1992

3040-01-354-9152
Linear Actuating Cylinder Piston

013549152
6-701-000396: RNCC: 3 | RNVC: 2
2HE912: RNCC: C | RNVC: 1

7 Mar 1992

3040-01-355-7658
Straight Shaft

013557658
12553267: RNCC: 3 | RNVC: 2

23 Mar 1992

3040-01-356-0813
Shouldered Shaft

013560813
42305-526: RNCC: 3 | RNVC: 2
42305-526: RNCC: 5 | RNVC: 2
42305-526: RNCC: 5 | RNVC: 9
42305E526: RNCC: 5 | RNVC: 9
42305-526: RNCC: 5 | RNVC: 9
42305E526: RNCC: 5 | RNVC: 9

28 Mar 1992

3040-01-357-0547
Control Cam

013570547
12553527: RNCC: 3 | RNVC: 2

16 Apr 1992

3040-01-356-8739
Rigid Connecting Link

013568739
4078355: RNCC: 3 | RNVC: 2
4078355: RNCC: 5 | RNVC: 2
3040PL0669164: RNCC: 6 | RNVC: 9

12 Apr 1992

3040-01-357-5676
Straight Shaft

013575676
21371-4: RNCC: 3 | RNVC: 2
21371-4: RNCC: 5 | RNVC: 2
2GK305: RNCC: 5 | RNVC: 2
21371-4: RNCC: 5 | RNVC: 2
2GK305: RNCC: 5 | RNVC: 9

26 Apr 1992

3040-01-357-5724
Push-Pull Control Assembly

013575724
CCX63304: RNCC: 3 | RNVC: 2
32377-003-4FT: RNCC: 5 | RNVC: 9
32377-003-48IN.: RNCC: 5 | RNVC: 9
87-65870-003-48: RNCC: 5 | RNVC: 9
32377-003-4FT: RNCC: 5 | RNVC: 9
32377-003-48IN.: RNCC: 5 | RNVC: 9

26 Apr 1992

3040-01-357-5849
Straight Shaft

013575849
53X-01-153: RNCC: 3 | RNVC: 9
53X-01-153: RNCC: 5 | RNVC: 9
53X-01-153: RNCC: C | RNVC: 1

27 Apr 1992

3040-01-357-8786
Spur Gearshaft

013578786
126-53026-3: RNCC: 3 | RNVC: 2
126-53026: RNCC: D | RNVC: 9

3 May 1992

3040-01-359-1117
Mechanical Drive Housing

013591117
16550: RNCC: 3 | RNVC: 2
16550: RNCC: 5 | RNVC: 2
5938618: RNCC: 5 | RNVC: 2
5938618: RNCC: 5 | RNVC: 9

29 May 1992

3040-01-358-7034
Helical Gearshaft

013587034
12342602: RNCC: 3 | RNVC: 2
3040013587034: RNCC: 5 | RNVC: 9
3040PL0841747: RNCC: 6 | RNVC: 9
3040013587034: RNCC: 6 | RNVC: 9
12342602: RNCC: D | RNVC: 9

18 May 1992

3040-01-358-8692
Multiple Gears Gearshaft

013588692
17565: RNCC: 3 | RNVC: 2
5938639: RNCC: 5 | RNVC: 2

22 May 1992

3040-01-359-2464
Shouldered Shaft

013592464
8909-371-001: RNCC: 3 | RNVC: 2
8909-371-001: RNCC: 5 | RNVC: 9

1 Jun 1992

3040-01-358-7048
Cylinder Support

013587048
4W6960: RNCC: 3 | RNVC: 2

18 May 1992

3040-01-360-6284
Shouldered Shaft

013606284
29506077: RNCC: 3 | RNVC: 2
29506077: RNCC: 5 | RNVC: 2
29506077: RNCC: 5 | RNVC: 2

28 Jun 1992

3040-01-362-5689
Shouldered Shaft

013625689
50212010-9: RNCC: 3 | RNVC: 2
50212010-9: RNCC: 5 | RNVC: 9
50212010-9: RNCC: 5 | RNVC: 9
50212010-9: RNCC: 5 | RNVC: 9
50212010 ITEM 9: RNCC: 5 | RNVC: 9

9 Aug 1992

3040-01-363-2360
Counterbalance Weight

013632360
5157400720: RNCC: 3 | RNVC: 9
5157400720: RNCC: 5 | RNVC: 2
5157400720: RNCC: 5 | RNVC: 9

27 Aug 1992

3040-01-363-4334
Shouldered Shaft

013634334
3881133-2: RNCC: 3 | RNVC: 2

29 Aug 1992

3040-01-362-3530
Linear Actuating Cylinder Assembly

013623530
3261Q1057: RNCC: 3 | RNVC: 2
3261Q1057: RNCC: 5 | RNVC: 2
3261Q1057: RNCC: 5 | RNVC: 2
3261Q1057: RNCC: 5 | RNVC: 9

5 Aug 1992

3040-01-361-0755
Body Hub

013610755
29530448: RNCC: 3 | RNVC: 2
22KP754: RNCC: 5 | RNVC: 1
29530448: RNCC: 5 | RNVC: 2
29530448: RNCC: 5 | RNVC: 2
29500950: RNCC: 5 | RNVC: 9
29516169: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-363-8783
Adjusting Cap Assembly

013638783
20243: RNCC: 3 | RNVC: 2

8 Sep 1992

3040-01-364-4607
Rigid Connecting Link

013644607
L6317371-001: RNCC: 3 | RNVC: 2
L6317371: RNCC: D | RNVC: 9

19 Sep 1992

3040-01-365-2577
Shouldered Shaft

013652577
MBEU142171: RNCC: 3 | RNVC: 2
MBEU142171: RNCC: 5 | RNVC: 2
MBEU14217: RNCC: 5 | RNVC: 2
MBEU142171: RNCC: 5 | RNVC: 2
10107281: RNCC: 6 | RNVC: 9

4 Oct 1992

3040-01-364-9832
Brake Bolt Assembly

013649832
2179-1031-000: RNCC: 3 | RNVC: 2
2179-1031-000: RNCC: 5 | RNVC: 9
PL2179-1100-100 SEQ13: RNCC: 5 | RNVC: 9
PL2179-1100-100 SEQ13: RNCC: C | RNVC: 1

28 Sep 1992

3040-01-365-2923
Friction Lining

013652923
H007A0022-00: RNCC: 3 | RNVC: 9
H007A0022-00: RNCC: 5 | RNVC: 2
H007A0001-00 ITEM 15: RNCC: 5 | RNVC: 9
H007A0022-00: RNCC: 5 | RNVC: 9
H007A0001-00: RNCC: D | RNVC: 9

5 Oct 1992

3040-01-365-2974
Manual Control Lever

013652974
803-5959218PC11: RNCC: 3 | RNVC: 2
DN10031: RNCC: 5 | RNVC: 2
803-5959218: RNCC: D | RNVC: 9

5 Oct 1992

3040-01-365-9295
Pawl

013659295
MBEU146400: RNCC: 3 | RNVC: 2
MBEU146400: RNCC: 5 | RNVC: 2
MBEU146400: RNCC: 5 | RNVC: 9

19 Oct 1992

3040-01-366-3831
Shouldered Shaft

013663831
MBEU145906: RNCC: 3 | RNVC: 2
MBEU145906: RNCC: 5 | RNVC: 2
10107286: RNCC: 6 | RNVC: 9

24 Oct 1992

3040-01-369-0594
Hydraulic Accumulator

013690594
BA02B3T01P2: RNCC: 3 | RNVC: 2
H615B001 ITEM 39: RNCC: 5 | RNVC: 2
849760: RNCC: 5 | RNVC: 9
BA02B3T01A1: RNCC: 5 | RNVC: 9

13 Dec 1992

3040-01-369-3579
Remote Control Lever

013693579
12384657: RNCC: 3 | RNVC: 2

22 Dec 1992

3040-01-370-1347
Straight Shaft

013701347
6-810-002184: RNCC: 3 | RNVC: 2
6-810-002184: RNCC: 5 | RNVC: 2
6-810-002184: RNCC: 5 | RNVC: 2

14 Jan 1993

3040-01-370-2553
Linear Actuating Cylinder Piston Rod

013702553
12938327: RNCC: 3 | RNVC: 2

16 Jan 1993

3040-01-370-1388
Mechanical Drive Housing

013701388
9170401-01: RNCC: 3 | RNVC: 2
9170401: RNCC: 5 | RNVC: 2
9170401-01: RNCC: 5 | RNVC: 9
9170401: RNCC: 5 | RNVC: 9

14 Jan 1993

3040-01-361-0572
Shouldered Shaft

013610572
29506362: RNCC: 3 | RNVC: 2
29506362: RNCC: 5 | RNVC: 2
29506362: RNCC: 5 | RNVC: 2

8 Jul 1992

3040-01-361-0573
Shouldered Shaft

013610573
29508166: RNCC: 3 | RNVC: 2
29508166: RNCC: 5 | RNVC: 2
29508166: RNCC: 5 | RNVC: 2

8 Jul 1992

3040-01-317-1579
Rigid Connecting Link

013171579
7339434: RNCC: 3 | RNVC: 2

23 Mar 1990

3040-01-317-1578
Rigid Connecting Link

013171578
13228E6087: RNCC: 3 | RNVC: 2

23 Mar 1990

3040-01-317-2811
Control Cam

013172811
3037-639: RNCC: 3 | RNVC: 2
3037-639: RNCC: 5 | RNVC: 2
X83470-145: RNCC: 5 | RNVC: 9

27 Mar 1990

3040-01-318-6368
Straight Shaft

013186368
6147015: RNCC: 3 | RNVC: 2

21 Apr 1990

3040-01-319-7627
Shouldered Shaft

013197627
413-10988-501: RNCC: 3 | RNVC: 2

15 May 1990

3040-01-320-4262
Rigid Connecting Link

013204262
4074709: RNCC: 3 | RNVC: 2
4074709: RNCC: 5 | RNVC: 2
4074711: RNCC: 5 | RNVC: 2
4074710: RNCC: 5 | RNVC: 2
4074711: RNCC: 5 | RNVC: 2
4071760: RNCC: 5 | RNVC: 2
4074710: RNCC: 5 | RNVC: 2
4071760: RNCC: 5 | RNVC: 2
4074711: RNCC: 5 | RNVC: 9

24 May 1990

3040-01-321-9847
Shouldered Shaft

013219847
953B966-1: RNCC: 3 | RNVC: 2
953B966-1: RNCC: 5 | RNVC: 9

27 Jun 1990

3040-01-322-2516
Counterbalance Weight

013222516
725170-2: RNCC: 3 | RNVC: 2

30 Jun 1990

3040-01-322-9905
Spur Gearshaft

013229905
9341M58G02: RNCC: 3 | RNVC: 2

18 Jul 1990

3040-01-323-9130
Counterbalance Weight

013239130
1588M78P01: RNCC: 3 | RNVC: 2

5 Aug 1990

3040-01-323-9839
Remote Control Lever

013239839
3825093-4: RNCC: 3 | RNVC: 2
3825093-4: RNCC: 5 | RNVC: 2
3825093-4: RNCC: 5 | RNVC: 9
10107024: RNCC: 6 | RNVC: 9

7 Aug 1990

3040-01-324-2096
Spur Gearshaft

013242096
L1800183-013: RNCC: 3 | RNVC: 2
L1800183-013: RNCC: 5 | RNVC: 2
L1800183-013: RNCC: 5 | RNVC: 2

11 Aug 1990

3040-01-324-1980
Bell Crank

013241980
3825095-1: RNCC: 3 | RNVC: 2
3825095-1: RNCC: 5 | RNVC: 2
3825095-1: RNCC: 5 | RNVC: 2
10107025: RNCC: 6 | RNVC: 9

11 Aug 1990

3040-01-325-2147
Control Cam

013252147
3035-412: RNCC: 3 | RNVC: 2

30 Aug 1990

Load More Results