What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 124 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 124of 575

3040-01-488-7452
Bell Crank Support

014887452
1276M85P02: RNCC: 3 | RNVC: 2

31 Aug 2001

3040-01-486-4705
Shouldered Shaft

014864705
342-7067322-72: RNCC: 3 | RNVC: 2
H643-7003-72: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

29 Jun 2001

3040-01-491-0581
Rigid Connecting Link

014910581
160D920114-1: RNCC: 3 | RNVC: 9
160D920114-1: RNCC: 5 | RNVC: 9
160D920114-1: RNCC: C | RNVC: 1
160D920114: RNCC: D | RNVC: 9

11 Oct 2001

3040-01-490-4923
Adapter Hoist Ring

014904923
4D09723-001: RNCC: 3 | RNVC: 2
6510E71FN94: RNCC: 5 | RNVC: 9
4D09723: RNCC: D | RNVC: 9
6510E71: RNCC: D | RNVC: 9

28 Sep 2001

3040-01-497-0345
Rotating Shaft Eye Bracket

014970345
239963: RNCC: 3 | RNVC: 2
CMG 239963: RNCC: 5 | RNVC: 2

7 May 2002

3040-01-497-0413
Shouldered Shaft

014970413
3000282: RNCC: 3 | RNVC: 2
3000282: RNCC: 5 | RNVC: 9

7 May 2002

3040-01-497-3012
Straight Shaft

014973012
4102382-1: RNCC: 3 | RNVC: 2
4102382-1: RNCC: 5 | RNVC: 2
4101105-1 FIND 3: RNCC: 5 | RNVC: 9
4101104-1 FIND 118: RNCC: 5 | RNVC: 9

16 May 2002

3040-01-498-1885
Linear Actuating Cylinder Assembly Parts Kit

014981885
1643601: RNCC: 3 | RNVC: 2
1643813: RNCC: 5 | RNVC: 9
404940: RNCC: 5 | RNVC: 9

18 Jun 2002

3040-01-498-2038
Rigid Connecting Link

014982038
154061: RNCC: 3 | RNVC: 2

18 Jun 2002

3040-01-500-8363
Remote Control Lever

015008363
V7D10120-01: RNCC: 3 | RNVC: 2
V1E10517-01 ITEM 4: RNCC: 5 | RNVC: 2
V1E10602-01 ITEM 27: RNCC: 5 | RNVC: 2
V1E10517: RNCC: D | RNVC: 9
V1E10602: RNCC: D | RNVC: 9

12 Sep 2002

3040-01-500-6207
Counterbalance Weight

015006207
114R1737-5: RNCC: 3 | RNVC: 2
114R1737: RNCC: D | RNVC: 9

4 Sep 2002

3040-01-500-4292
Rigid Connecting Link

015004292
70400-02291-115: RNCC: 3 | RNVC: 2
3040PL1938768: RNCC: 6 | RNVC: 9

26 Aug 2002

3040-01-502-2438
Mechanically Actuated Spindle

015022438
2217-0004: RNCC: 3 | RNVC: 2

29 Oct 2002

3040-01-502-2969
Shouldered Shaft

015022969
512-7067304-24: RNCC: 3 | RNVC: 2
H643-2612-24: RNCC: 5 | RNVC: 2
34-26-7820: RNCC: 5 | RNVC: 2
7067304: RNCC: D | RNVC: 9

31 Oct 2002

3040-01-503-3779
Worm Shaft

015033779
1321255: RNCC: 3 | RNVC: 2
4475338033: RNCC: 5 | RNVC: 9
1321255: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-6467
Rigid Connecting Link

015036467
6623518: RNCC: 3 | RNVC: 2
6623518: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-6818
Rotating Shaft Eye Bracket

015036818
975939: RNCC: 3 | RNVC: 2
975939: RNCC: 3 | RNVC: 9
975939: RNCC: 5 | RNVC: 9

3 Jan 2003

3040-01-504-2956
Rigid Connecting Link

015042956
8036364: RNCC: 3 | RNVC: 2
8036364: RNCC: 5 | RNVC: 9

24 Jan 2003

3040-01-504-3919
Linear Actuating Cylinder Piston Rod

015043919
8035758: RNCC: 3 | RNVC: 2
8035758: RNCC: 5 | RNVC: 9

28 Jan 2003

3040-01-504-0008
Bracket Housing

015040008
6623431: RNCC: 3 | RNVC: 2
6623431: RNCC: 5 | RNVC: 9

15 Jan 2003

3040-01-506-9704
Hydraulic Control Assembly

015069704
185-5898: RNCC: 3 | RNVC: 2

15 Apr 2003

3040-01-507-3497
Control Cam Assembly

015073497
166-9413: RNCC: 3 | RNVC: 2
166-9413: RNCC: 5 | RNVC: 2
166-9413: RNCC: 5 | RNVC: 2
166-9413: RNCC: 5 | RNVC: 2

25 Apr 2003

3040-01-506-9494
Spline Adapter

015069494
7-511B11134-001: RNCC: 1 | RNVC: 2
2050261-1: RNCC: 3 | RNVC: 2
208-31300-01: RNCC: 5 | RNVC: 2

15 Apr 2003

3040-01-507-7897
Body Hub

015077897
209 450: RNCC: 3 | RNVC: 2
209 450: RNCC: 3 | RNVC: 9

6 May 2003

3040-01-508-6581
Worm Shaft

015086581
596-7409253-24: RNCC: 3 | RNVC: 2
596-7410365-79: RNCC: 5 | RNVC: 2
B434-8205-79: RNCC: 5 | RNVC: 2
B434-8212-24: RNCC: 5 | RNVC: 2
7409253: RNCC: D | RNVC: 9
7410365: RNCC: D | RNVC: 9

29 May 2003

3040-01-508-6623
Worm Shaft

015086623
596-7409253-23: RNCC: 3 | RNVC: 2
B434-8205-21: RNCC: 5 | RNVC: 2
596-7410365-21: RNCC: 5 | RNVC: 2
B434-8212-23: RNCC: 5 | RNVC: 2
596-7409253-21: RNCC: C | RNVC: 1
7410365: RNCC: D | RNVC: 9
7409253: RNCC: D | RNVC: 9

29 May 2003

3040-01-507-4030
Controllable Swashplate

015074030
713201: RNCC: 3 | RNVC: 2

28 Apr 2003

3040-01-509-6112
Shouldered Shaft

015096112
11447564-002: RNCC: 3 | RNVC: 2

26 Jun 2003

3040-01-510-7553
Shouldered Shaft Assembly

015107553
3429AS2110-1: RNCC: 3 | RNVC: 2
3429AS0160 FIND 9: RNCC: 5 | RNVC: 1
3429AS2110-1: RNCC: 5 | RNVC: 2
3429AS2110-1: RNCC: 5 | RNVC: 2
3429AS2110-1: RNCC: 5 | RNVC: 2
3429AS2110: RNCC: D | RNVC: 9

25 Jul 2003

3040-01-512-7432
Linear Actuating Cylinder

015127432
3335224: RNCC: 3 | RNVC: 2
3335224: RNCC: 3 | RNVC: 9
61379-1: RNCC: 5 | RNVC: 2

9 Sep 2003

3040-01-513-0915
Linear Actuating Cylinder Assembly Parts Kit

015130915
1 1/2HSPKV-2: RNCC: 3 | RNVC: 2
21903269 IT 1,3,5,10,13,18: RNCC: 5 | RNVC: 2
21903269: RNCC: D | RNVC: 9

17 Sep 2003

3040-01-513-5195
Control Cam

015135195
3035-558: RNCC: 3 | RNVC: 2

29 Sep 2003

3040-01-513-5719
Mechanical Drive Housing

015135719
RR34152-1: RNCC: 3 | RNVC: 2

30 Sep 2003

3040-01-514-0018
Push-Pull Control Assembly

015140018
CC33214: RNCC: 3 | RNVC: 2
CC63314: RNCC: 5 | RNVC: 9
CX3314: RNCC: 5 | RNVC: 9
10481102: RNCC: 6 | RNVC: 9

14 Oct 2003

3040-01-514-0036
Push-Pull Control Assembly

015140036
CCX3309: RNCC: 3 | RNVC: 2
CC63309: RNCC: 5 | RNVC: 9

14 Oct 2003

3040-01-514-1764
Straight Shaft Assembly

015141764
1755046: RNCC: 3 | RNVC: 2

20 Oct 2003

3040-01-514-7366
Shouldered Shaft

015147366
21155-1001-1: RNCC: 3 | RNVC: 2
21155 FIND 5: RNCC: 5 | RNVC: 2

4 Nov 2003

3040-01-515-0844
Mechanical Drive Housing Part

015150844
3195225: RNCC: 3 | RNVC: 2
3195225: RNCC: 5 | RNVC: 9

14 Nov 2003

3040-01-515-1803
Grpr Bracket Assy

015151803
B434-5219-A1: RNCC: 3 | RNVC: 2
596-7410504-2: RNCC: 5 | RNVC: 2
B434-5217-2: RNCC: 5 | RNVC: 2
596-7410506-A1: RNCC: 7 | RNVC: 2
7410506: RNCC: D | RNVC: 9

18 Nov 2003

3040-01-515-1815
Rigid Connecting Link

015151815
1KK283: RNCC: 3 | RNVC: 2
1KK283: RNCC: 3 | RNVC: 9
6502953: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-514-7367
Shouldered Shaft

015147367
21150-1002-1: RNCC: 3 | RNVC: 2
21150 FIND 12: RNCC: 5 | RNVC: 2

4 Nov 2003

3040-01-515-2332
Mechanically Actuated Spindle

015152332
8100-1251-0298 PT. NO. 314: RNCC: 3 | RNVC: 2
8100-1251-0298 PT. NO. 314: RNCC: 5 | RNVC: 2

19 Nov 2003

3040-01-516-5279
Flexible Shaft Assembly

015165279
57353-74: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-516-9266
Linear Actuating Cylinder Assembly

015169266
2HA956: RNCC: 3 | RNVC: 2
2HA956: RNCC: 3 | RNVC: 9
4900213-003: RNCC: 5 | RNVC: 2

26 Jan 2004

3040-01-516-6449
Shouldered Shaft

015166449
3637AS683-3: RNCC: 3 | RNVC: 2
3637AS683: RNCC: D | RNVC: 9

14 Jan 2004

3040-01-517-7467
Bolt Carrier Guide Rod

015177467
465-0159-2: RNCC: 3 | RNVC: 9
465-0159-2: RNCC: 5 | RNVC: 2
465-0159-2: RNCC: C | RNVC: 1

18 Feb 2004

3040-01-518-2474
Linear Actuating Cylinder Assembly Parts Kit

015182474
01510-7-60: RNCC: 3 | RNVC: 2
C-18658 PL: RNCC: 5 | RNVC: 9
C-18658: RNCC: 5 | RNVC: 9

5 Mar 2004

3040-01-518-5004
Shouldered Shaft

015185004
A62401-LPD-007 PC 52: RNCC: 3 | RNVC: 2
803-5184174 PC 53: RNCC: 5 | RNVC: 2

15 Mar 2004

3040-01-518-7534
Mechanically Actuated Spindle

015187534
A62402-LPD-138 PC9: RNCC: 3 | RNVC: 2
A62402-LPD-138 DETAIL 12-C: RNCC: 5 | RNVC: 2

23 Mar 2004

3040-01-520-9055
Shouldered Shaft

015209055
347-0652: RNCC: 3 | RNVC: 9
4KK527: RNCC: 5 | RNVC: 2
347-0652: RNCC: 5 | RNVC: 2
4KK527: RNCC: 5 | RNVC: 9
496-3130: RNCC: 5 | RNVC: 9

2 Jun 2004

3040-01-520-9571
Worm Wheel Gearshaft

015209571
B434-8310-4: RNCC: 3 | RNVC: 2
596-7409258-4: RNCC: 5 | RNVC: 1
8MX-30S-12-PB: RNCC: 5 | RNVC: 2

3 Jun 2004

3040-01-521-9280
Flexible Drive Shaft

015219280
106-0417: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 41: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-522-0719
Manual Control Lever

015220719
5821-26-005: RNCC: 3 | RNVC: 2
5909: RNCC: 5 | RNVC: 9

16 Jul 2004

3040-01-521-7993
Straight Shaft

015217993
12484455: RNCC: 3 | RNVC: 2
10309416: RNCC: 6 | RNVC: 9

6 Jul 2004

3040-01-522-5322
Nonaircraft Mechanical Actuator

015225322
058053: RNCC: 3 | RNVC: 2
FIG 7-3-81/5: RNCC: 5 | RNVC: 1
058053: RNCC: 5 | RNVC: 2

3 Aug 2004

3040-01-523-0416
Ring And Pinion Set

015230416
3000227: RNCC: 3 | RNVC: 2
3000227: RNCC: 5 | RNVC: 9

18 Aug 2004

3040-01-523-3644
Linear Actuating Cylinder Assembly

015233644
C-18656: RNCC: 3 | RNVC: 2

31 Aug 2004

3040-01-523-7200
Shouldered Shaft

015237200
14229: RNCC: 3 | RNVC: 2
4100670: RNCC: 5 | RNVC: 2
4100670: RNCC: 5 | RNVC: 9
14229: RNCC: 5 | RNVC: 9

14 Sep 2004

3040-01-525-1894
Straight Shaft

015251894
6828-151-000: RNCC: 3 | RNVC: 2
12326PL FIND NO 5: RNCC: 5 | RNVC: 2

30 Oct 2004

3040-01-525-3134
Shouldered Shaft

015253134
M27780004: RNCC: 3 | RNVC: 2
B13320004 ITEM 7: RNCC: 5 | RNVC: 9

3 Nov 2004

3040-01-525-7703
Shouldered Shaft

015257703
9-65154-3: RNCC: 3 | RNVC: 2

23 Nov 2004

3040-01-526-5122
Flexible Shaft Assembly

015265122
57353-20FT0IN: RNCC: 3 | RNVC: 2

21 Dec 2004

3040-01-526-5813
Shouldered Shaft Assembly

015265813
1001966-1: RNCC: 3 | RNVC: 2
1001966: RNCC: D | RNVC: 9

23 Dec 2004

3040-01-484-6559
Shaft Retaining Plate

014846559
3064582: RNCC: 3 | RNVC: 2

3 May 2001

3040-01-484-6623
Shaft Idler

014846623
3026166: RNCC: 3 | RNVC: 2

3 May 2001

3040-01-494-9110
Rigid Connecting Link

014949110
196801-B: RNCC: 3 | RNVC: 2

27 Feb 2002

3040-01-485-6423
Linear Actuating Cylinder Assembly Parts Kit

014856423
PK322HK001: RNCC: 3 | RNVC: 2

1 Jun 2001

3040-01-496-0332
Cable Guide

014960332
07.0703.0271: RNCC: 3 | RNVC: 9
07.0703.0271: RNCC: 5 | RNVC: 2

29 Mar 2002

3040-01-511-6471
Mechanical Drive Housing

015116471
02368003: RNCC: 3 | RNVC: 2

13 Aug 2003

3040-01-511-6454
Mechanical Drive Housing

015116454
02368002: RNCC: 3 | RNVC: 2

13 Aug 2003

3040-01-462-9929
Bell Crank

014629929
741205-K1: RNCC: 3 | RNVC: 2
8-38-14: RNCC: 5 | RNVC: 2
741205K01: RNCC: 5 | RNVC: 2

1 Mar 1999

3040-01-486-0602
Linear Actuating Cylinder Assembly Parts Kit

014860602
L073720124: RNCC: 3 | RNVC: 2

18 Jun 2001

3040-01-487-7013
Nonaircraft Mechanical Actuator

014877013
17-2-0529-1: RNCC: 3 | RNVC: 2
DC11024-300-024: RNCC: 5 | RNVC: 2
DYNC-11024-300-0-24: RNCC: 5 | RNVC: 9

14 Aug 2001

3040-01-488-9289
Tine Cylinder

014889289
50001196: RNCC: 3 | RNVC: 2

6 Sep 2001

3040-01-518-5312
Pinion Gear Set

015185312
8KP483: RNCC: 3 | RNVC: 2
29507806: RNCC: 5 | RNVC: 9
8KP483: RNCC: 5 | RNVC: 9

16 Mar 2004

3040-01-519-8774
Rigid Connecting Link

015198774
5HE816: RNCC: 3 | RNVC: 2
5HE816: RNCC: 3 | RNVC: 9
VPLFHAK3: RNCC: 5 | RNVC: 2

5 May 2004

3040-01-520-9141
Flexible Shaft Assembly

015209141
596-7410500-35: RNCC: 3 | RNVC: 2
B4345111A-35: RNCC: 5 | RNVC: 2
B4345111-35: RNCC: 5 | RNVC: 9

2 Jun 2004

3040-01-517-3699
Vehicular Door Handle

015173699
15-0864: RNCC: 3 | RNVC: 2

6 Feb 2004

3040-01-521-9234
Shouldered Shaft

015219234
106-6012: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 9: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-517-8453
Control Cam

015178453
13005084: RNCC: 3 | RNVC: 2

20 Feb 2004

3040-01-459-7676
Shouldered Shaft

014597676
8100-1251-0192 PC 127: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

14 Oct 1998

3040-01-461-3336
Rigid Connecting Link

014613336
1378AS283-1: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-461-8057
Linear Actuating Cylinder Assembly

014618057
1H000172055: RNCC: 3 | RNVC: 2
3038028: RNCC: 5 | RNVC: 9
2.50CF/H-2HLTVS13CX87.000: RNCC: 5 | RNVC: 9
AG189986A0: RNCC: 5 | RNVC: 9

5 Jan 1999

3040-01-461-8669
Rigid Connecting Link

014618669
12462685: RNCC: 3 | RNVC: 2
12462685: RNCC: 5 | RNVC: 2
12462685: RNCC: 5 | RNVC: 9

8 Jan 1999

3040-01-461-8618
Linear Actuating Cylinder Assembly

014618618
1H2H0A00314931: RNCC: 3 | RNVC: 2
5038024: RNCC: 5 | RNVC: 9
2.00CC-2HLTVS14C X 6.625: RNCC: 5 | RNVC: 9
AG189983G0: RNCC: 5 | RNVC: 9

8 Jan 1999

3040-01-461-9686
Linear Actuating Cylinder Assembly

014619686
AG189986C0: RNCC: 3 | RNVC: 2
5038021: RNCC: 5 | RNVC: 9
2.500CFH2-HLTVS13X87.500: RNCC: 5 | RNVC: 9

13 Jan 1999

3040-01-461-1931
Shouldered Shaft

014611931
74D460607-2013: RNCC: 3 | RNVC: 2
74D460607-2013: RNCC: 5 | RNVC: 9

3 Dec 1998

3040-01-462-5029
Shouldered Shaft

014625029
3121881: RNCC: 3 | RNVC: 2
3121881: RNCC: 5 | RNVC: 9

5 Feb 1999

3040-01-462-1269
Linear Actuating Cylinder Assembly

014621269
AG189982A0: RNCC: 3 | RNVC: 2
1.50F-2HLTVS23 X 1.625: RNCC: 5 | RNVC: 9
5038002: RNCC: 5 | RNVC: 9

21 Jan 1999

3040-01-468-1486
Shouldered Shaft Assembly

014681486
814190-2: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-468-4137
Straight Shaft

014684137
12366533: RNCC: 3 | RNVC: 2
12366533: RNCC: 5 | RNVC: 2

8 Oct 1999

3040-01-468-1674
Manual Control Lever Assembly

014681674
5006184: RNCC: 3 | RNVC: 2
176374: RNCC: 3 | RNVC: 9
176374: RNCC: 5 | RNVC: 9

30 Sep 1999

3040-01-469-1075
Body Hub

014691075
12462886: RNCC: 3 | RNVC: 2
12462886: RNCC: 5 | RNVC: 2

3 Nov 1999

3040-01-469-0399
Shouldered Shaft

014690399
2045719-3: RNCC: 3 | RNVC: 2
2045719-3: RNCC: 5 | RNVC: 2

1 Nov 1999

3040-01-469-2534
Rigid Connecting Link

014692534
11474335: RNCC: 3 | RNVC: 2
11474335: RNCC: 5 | RNVC: 2
11474335: RNCC: 5 | RNVC: 9
11474335: RNCC: D | RNVC: 9

9 Nov 1999

3040-01-470-1672
Rigid Connecting Link

014701672
124-4322615 PC 20: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

9 Dec 1999

3040-01-470-1704
Rigid Connecting Link

014701704
124-4322615 PC 18: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

9 Dec 1999

3040-01-470-9687
Gear Shaft

014709687
055370: RNCC: 3 | RNVC: 2
933B055370: RNCC: 5 | RNVC: 2

18 Jan 2000

3040-01-470-5811
Shaft Idler

014705811
23KP189: RNCC: 1 | RNVC: 2
200-4495: RNCC: 3 | RNVC: 2
CV133713: RNCC: 5 | RNVC: 2
200-4495: RNCC: 5 | RNVC: 2
1013207: RNCC: 5 | RNVC: 9

27 Dec 1999

3040-01-462-9702
Straight Shaft

014629702
707139-A: RNCC: 3 | RNVC: 2
8-19-9: RNCC: 5 | RNVC: 2
707139A00: RNCC: 5 | RNVC: 2

26 Feb 1999

3040-01-462-9695
Straight Shaft

014629695
707140A00: RNCC: 3 | RNVC: 2
8-18-9: RNCC: 5 | RNVC: 2
707140-A: RNCC: 5 | RNVC: 9

26 Feb 1999

3040-01-463-5811
Tracked Wheel

014635811
1137: RNCC: 3 | RNVC: 2
801-6336098 SHEET 57 ITEM 8: RNCC: 5 | RNVC: 2
6336098: RNCC: D | RNVC: 9

26 Mar 1999

3040-01-464-2813
Linear Actuating Cylinder Head

014642813
532110: RNCC: 3 | RNVC: 2

23 Apr 1999

3040-01-466-7916
Flexible Shaft Assembly

014667916
GTC-704-12: RNCC: 3 | RNVC: 2

2 Aug 1999

3040-01-472-7677
Brake Shoe

014727677
2C1-747: RNCC: 3 | RNVC: 2
2D3-621 ITEM 22: RNCC: 5 | RNVC: 2
2D3-621: RNCC: D | RNVC: 9

16 Mar 2000

3040-01-473-0302
Mechanically Actuated Spindle

014730302
124-4498686 PC 12: RNCC: 3 | RNVC: 2
124-4322609 PC 19B: RNCC: 5 | RNVC: 2
THREADS 1-3/4 5: RNCC: C | RNVC: 1
4322609: RNCC: D | RNVC: 9
4498686: RNCC: D | RNVC: 9

24 Mar 2000

3040-01-474-3408
Nonaircraft Mechanical Actuator

014743408
58302-00: RNCC: 3 | RNVC: 2
58302: RNCC: C | RNVC: 1

2 May 2000

3040-01-474-8799
Rigid Connecting Link

014748799
767255: RNCC: 3 | RNVC: 2

16 May 2000

3040-01-475-1365
Nonaircraft Mechanical Actuator

014751365
351293: RNCC: 3 | RNVC: 2

23 May 2000

3040-01-475-0929
Straight Shaft

014750929
S23-17253-0K: RNCC: 3 | RNVC: 2
033-57257: RNCC: 5 | RNVC: 9

22 May 2000

3040-01-474-8097
Mechanically Actuated Spindle

014748097
124-4322618 PC3: RNCC: 3 | RNVC: 2
124-4322618 PC 3B: RNCC: 5 | RNVC: 9
4322618: RNCC: D | RNVC: 9

12 May 2000

3040-01-475-2311
Shaft Collar

014752311
124-4322620 PC 8-90: RNCC: 3 | RNVC: 2
124-4322620 PC 8-95: RNCC: 3 | RNVC: 2
4322620: RNCC: D | RNVC: 9

25 May 2000

3040-01-474-9739
Planetary Gears Carrier

014749739
1023320: RNCC: 3 | RNVC: 9
AT218164: RNCC: 5 | RNVC: 9

18 May 2000

3040-01-475-8345
Shaft Retaining Plate

014758345
13496613: RNCC: 3 | RNVC: 2

14 Jun 2000

3040-01-476-7063
Rigid Connecting Link

014767063
6521-130: RNCC: 3 | RNVC: 2
74B428009-130: RNCC: 5 | RNVC: 2
74B428009-130: RNCC: 7 | RNVC: 2

20 Jul 2000

NSN 3040-01-478-0623 014780623 SHAFT ASSEMBLY,STRAIGHT

3040-01-478-0623
Straight Shaft Assembly

014780623
216717: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-478-3132
Linear Actuating Cylinder Assembly

014783132
C613531: RNCC: 3 | RNVC: 2
C613531: RNCC: 5 | RNVC: 2
C613531: RNCC: 5 | RNVC: 9

6 Sep 2000

3040-01-478-7483
Piston Rod Guide

014787483
198281-0001: RNCC: 3 | RNVC: 2
284591-0001 ITEM 20: RNCC: 5 | RNVC: 2
284591-0001: RNCC: D | RNVC: 9

26 Sep 2000

3040-01-479-4580
Remote Control Lever

014794580
3HB873: RNCC: 3 | RNVC: 2
3HB873: RNCC: 3 | RNVC: 9
050040151: RNCC: 5 | RNVC: 2

21 Oct 2000

3040-01-480-7595
Brake Band And Lining

014807595
24202631: RNCC: 3 | RNVC: 2
5740294: RNCC: 5 | RNVC: 2
2520PL0665448: RNCC: 6 | RNVC: 9

5 Dec 2000

3040-01-481-0932
Control Cam

014810932
577778: RNCC: 3 | RNVC: 2

18 Dec 2000

3040-01-481-7365
Pawl

014817365
6929586: RNCC: 3 | RNVC: 2

23 Jan 2001

3040-01-482-3931
Shouldered Shaft

014823931
L6410384-003: RNCC: 3 | RNVC: 2
L6410384: RNCC: D | RNVC: 9

20 Feb 2001

3040-01-482-5003
Housing Adapter

014825003
3219798-1: RNCC: 3 | RNVC: 2
3219798-1: RNCC: 5 | RNVC: 9

26 Feb 2001

3040-01-482-9007
Rigid Connecting Link

014829007
8100-1251-0307 PC NO 89: RNCC: 3 | RNVC: 2
803-6397269 PC NO 63: RNCC: 5 | RNVC: 2
803-6397268 PC 89: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9
6397268: RNCC: D | RNVC: 9

8 Mar 2001

3040-01-483-5465
Control Cam

014835465
7225914: RNCC: 3 | RNVC: 2
D1417026: RNCC: 5 | RNVC: 2

2 Apr 2001

3040-01-483-7657
Shouldered Shaft

014837657
556-7068391-32: RNCC: 3 | RNVC: 2
H793-3201-32: RNCC: 5 | RNVC: 2
7068391: RNCC: D | RNVC: 9

6 Apr 2001

3040-01-484-1437
Shouldered Shaft

014841437
21727: RNCC: 3 | RNVC: 2

20 Apr 2001

3040-01-485-7187
Linear Actuating Cylinder Assembly

014857187
076-84441-000: RNCC: 3 | RNVC: 2
376-84430-000 ITEM 15: RNCC: 5 | RNVC: 2
376-84441-000: RNCC: C | RNVC: 1

5 Jun 2001

3040-01-486-0170
Shouldered Shaft

014860170
122-6776279 PC 1: RNCC: 3 | RNVC: 2
6776279: RNCC: D | RNVC: 9

14 Jun 2001

3040-01-491-5722
Flexible Shaft Assembly

014915722
22001-100 X 218IN: RNCC: 3 | RNVC: 2
22001-100 X 18FT 2IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-492-9226
Linear Actuating Cylinder Piston

014929226
585-6726771-15: RNCC: 3 | RNVC: 2
DF2018-258#15: RNCC: 5 | RNVC: 2
6726771: RNCC: D | RNVC: 9

17 Dec 2001

3040-01-493-3422
Counterbalance Weight

014933422
5D87611-006: RNCC: 3 | RNVC: 2
6511E74FN35: RNCC: 5 | RNVC: 1

28 Dec 2001

3040-01-494-2884
Shouldered Shaft

014942884
006-6401001-300: RNCC: 3 | RNVC: 2

6 Feb 2002

3040-01-495-1788
Shouldered Shaft Assembly

014951788
983-WH11-401: RNCC: 3 | RNVC: 2

8 Mar 2002

3040-01-496-0963
Rigid Connecting Link

014960963
209-064-222-105: RNCC: 3 | RNVC: 2
209-064-222: RNCC: D | RNVC: 9

3 Apr 2002

3040-01-496-9289
Rigid Connecting Link

014969289
B-WT76F63SH81CRHS: RNCC: 3 | RNVC: 2

1 May 2002

3040-01-496-9415
Rigid Connecting Link

014969415
B-WT76F63SH81CRLS: RNCC: 3 | RNVC: 2

2 May 2002

3040-01-496-9416
Rigid Connecting Link

014969416
B-WT76F63SH82CRHS: RNCC: 3 | RNVC: 2

2 May 2002

3040-01-497-0670
Control Cam

014970670
90-228-1 ITEM 3: RNCC: 3 | RNVC: 2
D-3039: RNCC: 3 | RNVC: 9
90-228-1: RNCC: D | RNVC: 9

8 May 2002

3040-01-497-0996
Counterbalance Weight

014970996
5126T81P02: RNCC: 3 | RNVC: 2
5126T81P02: RNCC: 5 | RNVC: 9

9 May 2002

3040-01-497-0539
Bell Crank

014970539
754-7066812-58: RNCC: 3 | RNVC: 2
H553-1502-58: RNCC: 5 | RNVC: 2
754-7066812: RNCC: D | RNVC: 9

8 May 2002

3040-01-498-2126
Rigid Connecting Link

014982126
518-4457096-11: RNCC: 3 | RNVC: 2
2013-54-11: RNCC: 5 | RNVC: 2
518-4457096-12: RNCC: C | RNVC: 1
518-4457096: RNCC: D | RNVC: 9

19 Jun 2002

3040-01-498-2568
Aircraf Input Shaft

014982568
3637AS808-1: RNCC: 3 | RNVC: 2
3637AS808: RNCC: D | RNVC: 9

20 Jun 2002

3040-01-498-4299
Straight Shaft

014984299
518-4457096-56: RNCC: 3 | RNVC: 2
2013-54-56: RNCC: 5 | RNVC: 2
H600-2013-54-56: RNCC: 5 | RNVC: 2
518-4457096: RNCC: D | RNVC: 9

26 Jun 2002

3040-01-499-5980
Extension Shaft

014995980
752-7068459-88: RNCC: 3 | RNVC: 2
H832-1633-88: RNCC: 5 | RNVC: 2
7068459: RNCC: D | RNVC: 9

30 Jul 2002

3040-01-500-0739
Extension Shaft

015000739
04-TL-006: RNCC: 3 | RNVC: 2
04-TL-006: RNCC: 3 | RNVC: 9

13 Aug 2002

3040-01-500-3458
Nonaircraft Mechanical Actuator

015003458
LA40PTL: RNCC: 3 | RNVC: 2
LA40-42050: RNCC: D | RNVC: 9

22 Aug 2002

3040-01-500-9321
Remote Control Lever

015009321
12477639: RNCC: 3 | RNVC: 2
12477639: RNCC: 5 | RNVC: 2
12477639: RNCC: D | RNVC: 9

17 Sep 2002

3040-01-501-4204
Hydraulic Accumulator

015014204
47254: RNCC: 3 | RNVC: 2

1 Oct 2002

3040-01-501-9542
Shouldered Shaft

015019542
17-44167A 1: RNCC: 3 | RNVC: 2

22 Oct 2002

3040-01-502-1979
Shouldered Shaft

015021979
616707-3-A: RNCC: 3 | RNVC: 2
801624-551 PC NO. 31A: RNCC: 5 | RNVC: 2
801624-551: RNCC: D | RNVC: 9

29 Oct 2002

3040-01-502-7221
Linear Actuating Cylinder Assembly

015027221
30-024: RNCC: 3 | RNVC: 2
30-002 IT 4: RNCC: 5 | RNVC: 2

19 Nov 2002

3040-01-503-3188
Spur Gearshaft

015033188
29535235: RNCC: 3 | RNVC: 2
29535235: RNCC: 5 | RNVC: 2
5HA275: RNCC: 5 | RNVC: 2
5HA275: RNCC: 5 | RNVC: 9

12 Dec 2002

3040-01-503-4450
Linear Actuating Cylinder Assembly

015034450
H-HWCYL-COL: RNCC: 3 | RNVC: 9

18 Dec 2002

3040-01-503-6468
Rigid Connecting Link

015036468
6623519: RNCC: 3 | RNVC: 2
6623519: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-6470
Rigid Connecting Link

015036470
6623521: RNCC: 3 | RNVC: 2
6623521: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-7566
Body Hub

015037566
29542017: RNCC: 3 | RNVC: 2
5HA159: RNCC: 5 | RNVC: 2
29542017: RNCC: 5 | RNVC: 2
5HA159: RNCC: 5 | RNVC: 9
29505783: RNCC: 5 | RNVC: 9

7 Jan 2003

3040-01-505-1323
Linear Actuating Cylinder

015051323
100434: RNCC: 3 | RNVC: 2
25564: RNCC: 5 | RNVC: 9

24 Feb 2003

3040-01-505-9264
Worm Shaft

015059264
596-7409253-22: RNCC: 3 | RNVC: 2
596-7410365-68: RNCC: 5 | RNVC: 2
B434-8205-68: RNCC: 5 | RNVC: 2
B434-8212-22: RNCC: 5 | RNVC: 2
7410365: RNCC: D | RNVC: 9
7409253: RNCC: D | RNVC: 9

19 Mar 2003

3040-01-505-9359
Rigid Connecting Link

015059359
12422794: RNCC: 3 | RNVC: 2
12422794: RNCC: 5 | RNVC: 2
12422794: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-507-7894
Spur Gearshaft

015077894
1703423: RNCC: 3 | RNVC: 2

6 May 2003

3040-01-511-9054
Spur Gearshaft

015119054
A32128-1: RNCC: 3 | RNVC: 2

19 Aug 2003

3040-01-513-3344
Spur Gearshaft

015133344
1962M38P03: RNCC: 3 | RNVC: 2
1962M38: RNCC: D | RNVC: 9

24 Sep 2003

3040-01-513-6271
Shouldered Shaft

015136271
3324978: RNCC: 3 | RNVC: 2
3324978: RNCC: 3 | RNVC: 9
920800-2623: RNCC: 5 | RNVC: 2

1 Oct 2003

3040-01-514-5122
Push-Pull Control Assembly

015145122
CC63332: RNCC: 3 | RNVC: 9
1165943: RNCC: 5 | RNVC: 2

28 Oct 2003

3040-01-514-7862
Straight Shaft Assembly

015147862
2T3557: RNCC: 3 | RNVC: 2

5 Nov 2003

3040-01-515-2066
Shouldered Shaft

015152066
1KK267: RNCC: 3 | RNVC: 2
1KK267: RNCC: 3 | RNVC: 9
6502845: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-515-2088
Shouldered Shaft Assembly

015152088
1KK265: RNCC: 3 | RNVC: 2
1KK265: RNCC: 3 | RNVC: 9
6502825: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-515-5182
Rigid Connecting Link

015155182
901-031-635-113: RNCC: 3 | RNVC: 2

27 Nov 2003

3040-01-515-7135
Elevating Actuator

015157135
13001768: RNCC: 3 | RNVC: 2

5 Dec 2003

3040-01-515-7246
Kit

015157246
R433033111: RNCC: 3 | RNVC: 2
P116545: RNCC: 5 | RNVC: 9
C194065 REF.5B,5C,5D,5E,5F: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-515-7275
Tube Seal Kit

015157275
C114469: RNCC: 3 | RNVC: 2
R433002577: RNCC: 5 | RNVC: 2
C193915 REF.11,14,15,16,17: RNCC: 5 | RNVC: 2
R433002577: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-516-0927
Friction Lining

015160927
80250: RNCC: 3 | RNVC: 2
243-5750625 FIND NO.3 PN 80250: RNCC: 5 | RNVC: 2
5750625: RNCC: D | RNVC: 9

18 Dec 2003

3040-01-516-4013
Disk Brake Shoe Set

015164013
7080207-Z: RNCC: 3 | RNVC: 2
7080207-Z: RNCC: 5 | RNVC: 2
A34015: RNCC: D | RNVC: 9

7 Jan 2004

3040-01-516-2108
Shouldered Shaft

015162108
5793199 FIND 303: RNCC: 3 | RNVC: 2
6395132-1: RNCC: 5 | RNVC: 2

23 Dec 2003

3040-01-516-4884
Straight Shaft

015164884
42137: RNCC: 3 | RNVC: 2
75M23-42135-TD ITEM 1.2: RNCC: 5 | RNVC: 2
75M23-42135 ITEM 1.2: RNCC: 5 | RNVC: 2
75M23-42135 ITEM 2: RNCC: 5 | RNVC: 2

8 Jan 2004

3040-01-516-2824
Shouldered Shaft

015162824
3031136-001: RNCC: 3 | RNVC: 2

29 Dec 2003

3040-01-517-1089
Shouldered Shaft

015171089
1KK220: RNCC: 3 | RNVC: 2
1KK220: RNCC: 3 | RNVC: 9
6509610: RNCC: 5 | RNVC: 9

29 Jan 2004

3040-01-516-6815
Rigid Connecting Link

015166815
901-001-930-101: RNCC: 3 | RNVC: 2

15 Jan 2004

3040-01-521-7707
Shaft Idler

015217707
12484417: RNCC: 3 | RNVC: 2

2 Jul 2004

3040-01-522-1369
Nonaircraft Mechanical Actuator

015221369
15881604-1: RNCC: 3 | RNVC: 2
15881604-1: RNCC: 3 | RNVC: 9
15881602 ITEM 2: RNCC: 5 | RNVC: 9
15881602 ITEM 2: RNCC: C | RNVC: 1

20 Jul 2004

3040-01-517-3781
Linear Actuating Cylinder Assembly Parts Kit

015173781
233-9205: RNCC: 3 | RNVC: 2
185-7688: RNCC: 5 | RNVC: 9

6 Feb 2004

3040-01-522-1878
Shouldered Shaft

015221878
EBV-S2-30-0002-17: RNCC: 3 | RNVC: 2
EBV-S2-30-0002 DET 17: RNCC: 5 | RNVC: 2
EBV-S2-30-0002: RNCC: D | RNVC: 9

21 Jul 2004

3040-01-522-2130
Bevel Gear And Shaft Assembly

015222130
056 730: RNCC: 3 | RNVC: 2

22 Jul 2004

3040-01-522-5871
Linear Actuating Cylinder

015225871
106-0251: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 7: RNCC: 5 | RNVC: 2
506-3005: RNCC: D | RNVC: 9

4 Aug 2004

3040-01-522-5637
Control Cam Assembly

015225637
0621-2004: RNCC: 3 | RNVC: 2
2471-0003 FIND NO 8: RNCC: 5 | RNVC: 2

4 Aug 2004

3040-01-523-2530
Mechanical Drive Housing

015232530
3000274: RNCC: 3 | RNVC: 2
12641136: RNCC: 3 | RNVC: 2
3000274: RNCC: 5 | RNVC: 9

25 Aug 2004

3040-01-524-2646
Shouldered Shaft

015242646
R902409162: RNCC: 3 | RNVC: 2

27 Sep 2004

3040-01-524-2488
Rigid Connecting Link

015242488
12423358-002: RNCC: 3 | RNVC: 2
12423358-002: RNCC: 5 | RNVC: 2

27 Sep 2004

3040-01-524-9803
Inertia Damper

015249803
JE140319X19S6L: RNCC: 3 | RNVC: 2
JE-1403 ASSEMBLY 4: RNCC: 5 | RNVC: 2

25 Oct 2004

3040-01-525-0489
Rigid Connecting Link

015250489
3900-230: RNCC: 3 | RNVC: 2
3900-230: RNCC: 5 | RNVC: 9

26 Oct 2004

3040-01-524-8289
Piston Rod Ring

015248289
A098976.25: RNCC: 3 | RNVC: 2
055940 ITEM 6: RNCC: 5 | RNVC: 2
055940 ITEM 6: RNCC: 5 | RNVC: 9
A098976.25: RNCC: 5 | RNVC: 9

19 Oct 2004

3040-01-525-6348
Linear Actuating Cylinder Assembly

015256348
211.24.623.10: RNCC: 3 | RNVC: 2
211.24.623.02: RNCC: 3 | RNVC: 9

18 Nov 2004

3040-01-526-2221
Flexible Shaft Assembly

015262221
57353-70FT0IN: RNCC: 3 | RNVC: 2

11 Dec 2004

3040-01-458-1509
Rigid Connecting Link

014581509
845-7069126-X-38: RNCC: 3 | RNVC: 1

14 Aug 1998

3040-01-458-7193
Brake Disc

014587193
0801-1206: RNCC: 3 | RNVC: 2
1378AS162-1: RNCC: 5 | RNVC: 9
1378AS162: RNCC: D | RNVC: 9

5 Sep 1998

3040-01-457-3081
Remote Control Lever

014573081
4W-3930: RNCC: 3 | RNVC: 2
4W-3930: RNCC: 5 | RNVC: 2
4W-3930: RNCC: 5 | RNVC: 2
4P-7028 IT 1: RNCC: 5 | RNVC: 2

18 Jul 1998

3040-01-458-8487
Shouldered Shaft

014588487
932-160-00: RNCC: 3 | RNVC: 2

11 Sep 1998

3040-01-458-9477
Linear Actuating Cylinder Assembly

014589477
6-372-004429: RNCC: 3 | RNVC: 2
6-372-004429: RNCC: 5 | RNVC: 9
6371004429: RNCC: 5 | RNVC: 9

16 Sep 1998

3040-01-459-0255
Stop Collar

014590255
90005215E01: RNCC: 3 | RNVC: 2
9005-OC-15: RNCC: 3 | RNVC: 9
9005-OC: RNCC: D | RNVC: 9

17 Sep 1998

3040-01-459-7513
Control Cam

014597513
DF2301-905-FN-13: RNCC: 3 | RNVC: 2
801-6406479-13: RNCC: 5 | RNVC: 2
211039327: RNCC: 5 | RNVC: 9
38011-403: RNCC: D | RNVC: 9
6406479: RNCC: D | RNVC: 9

14 Oct 1998

3040-01-460-0083
Straight Shaft

014600083
12001450: RNCC: 3 | RNVC: 2
215410: RNCC: 5 | RNVC: 9
215410: RNCC: C | RNVC: 1

22 Oct 1998

3040-01-461-5584
Extension Shaft

014615584
74D115050-2121: RNCC: 3 | RNVC: 2

17 Dec 1998

3040-01-468-9163
Flexible Shaft Assembly

014689163
22001-100 X 14FT 3IN: RNCC: 3 | RNVC: 2
22001: RNCC: D | RNVC: 9

27 Oct 1999

3040-01-468-9464
Rigid Connecting Link

014689464
4726-101: RNCC: 3 | RNVC: 2
74B463604-101: RNCC: 7 | RNVC: 2

28 Oct 1999

3040-01-468-7730
Nonaircraft Mechanical Actuator

014687730
5821000: RNCC: 3 | RNVC: 2
5821000: RNCC: 5 | RNVC: 9

21 Oct 1999

3040-01-469-7962
Shaft Collar

014697962
124-4322649 PC27: RNCC: 3 | RNVC: 2
124-4322648 PC28: RNCC: 5 | RNVC: 2
124-4322648 PC28: RNCC: 5 | RNVC: 9
124-4322649 PC27: RNCC: 5 | RNVC: 9
4322648: RNCC: 5 | RNVC: 9
4322649: RNCC: 5 | RNVC: 9
4322649: RNCC: D | RNVC: 9
4322648: RNCC: D | RNVC: 9

24 Nov 1999

3040-01-470-4782
Straight Shaft

014704782
23KP130: RNCC: 1 | RNVC: 2
138-7198: RNCC: 3 | RNVC: 2
138-7198: RNCC: 5 | RNVC: 2
CV133709: RNCC: 5 | RNVC: 2

21 Dec 1999

3040-01-471-9329
Counterbalance Weight

014719329
901-015-062-103: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-462-9692
Straight Shaft

014629692
707667A00: RNCC: 3 | RNVC: 2
8-28-8: RNCC: 5 | RNVC: 2
707667-A: RNCC: 5 | RNVC: 9

26 Feb 1999

3040-01-466-0454
Nonaircraft Mechanical Actuator

014660454
367538-2: RNCC: 3 | RNVC: 2
367538: RNCC: D | RNVC: 9

1 Jul 1999

3040-01-466-7923
Flexible Shaft Assembly

014667923
GTC-701-25: RNCC: 3 | RNVC: 2

2 Aug 1999

3040-01-466-7927
Flexible Shaft Assembly

014667927
GTC-720-15: RNCC: 3 | RNVC: 2

2 Aug 1999

3040-01-467-0728
Rigid Connecting Link

014670728
3392AS354: RNCC: 3 | RNVC: 2

12 Aug 1999

3040-01-467-8959
Linear Actuating Cylinder Assembly

014678959
AG201176D0: RNCC: 3 | RNVC: 2

20 Sep 1999

3040-01-472-7747
Rigid Connecting Link

014727747
12379848: RNCC: 3 | RNVC: 2

16 Mar 2000

3040-01-473-3977
Rigid Connecting Link

014733977
12389681: RNCC: 3 | RNVC: 2

6 Apr 2000

3040-01-473-6702
Rigid Connecting Link

014736702
74A675230-1003: RNCC: 3 | RNVC: 2
74A675230-1003: RNCC: 5 | RNVC: 9
74A675230-1001: RNCC: E | RNVC: 8
74A675230-1001: RNCC: E | RNVC: 8

13 Apr 2000

3040-01-473-9110
Linear Actuating Cylinder Assembly

014739110
AG201175D0: RNCC: 3 | RNVC: 2

19 Apr 2000

3040-01-475-6647
Rigid Connecting Link

014756647
124-5563773 PC 8: RNCC: 3 | RNVC: 2
124-5563772 PC 39: RNCC: 5 | RNVC: 9
5563772: RNCC: D | RNVC: 9
5563773: RNCC: D | RNVC: 9

8 Jun 2000

3040-01-476-7650
Mechanically Actuated Spindle

014767650
8100-1251-0310 PC 315: RNCC: 3 | RNVC: 2
8100-1251-0310: RNCC: D | RNVC: 9

21 Jul 2000

3040-01-477-3266
Shouldered Shaft

014773266
9904108411: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-477-3202
Multiple Gears Gearshaft

014773202
9904106172: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-476-1124
Straight Axle

014761124
060-31-SP211: RNCC: 3 | RNVC: 2
060DH2-211 ITEM 3: RNCC: 5 | RNVC: 2
060-31-SP211: RNCC: 5 | RNVC: 9
060DH2-211 ITEM 3: RNCC: 5 | RNVC: 9
060DH2-211: RNCC: D | RNVC: 9

27 Jun 2000

3040-01-478-1984
Mechanical Drive Housing

014781984
767008: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-0385
Ball Joint

014780385
12525439: RNCC: 3 | RNVC: 2
216596: RNCC: 5 | RNVC: 2

29 Aug 2000

3040-01-478-5950
Straight Shaft Assembly

014785950
12466447: RNCC: 3 | RNVC: 2

20 Sep 2000

3040-01-478-6980
Shouldered Shaft

014786980
CC-6003-EPC: RNCC: 3 | RNVC: 2
CC-6000 ITEM 6: RNCC: 5 | RNVC: 2
06071-S1: RNCC: D | RNVC: 9

22 Sep 2000

3040-01-478-8767
Shouldered Shaft

014788767
37306: RNCC: 3 | RNVC: 2

29 Sep 2000

3040-01-479-5954
Shaft Idler

014795954
9-P-91: RNCC: 3 | RNVC: 9
8KP314: RNCC: 5 | RNVC: 2
8KP314: RNCC: 5 | RNVC: 9

26 Oct 2000

3040-01-480-1245
Aircra Output Shaft

014801245
2746333-1: RNCC: 3 | RNVC: 2

8 Nov 2000

3040-01-479-8487
Rigid Connecting Link

014798487
93981-5: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-479-9196
Shouldered Shaft

014799196
9HB5: RNCC: 3 | RNVC: 2
9HB5: RNCC: 3 | RNVC: 9
104833PS: RNCC: 5 | RNVC: 2
104833: RNCC: 5 | RNVC: 9

1 Nov 2000

3040-01-480-7071
Planet Gear Shaft

014807071
3000219: RNCC: 3 | RNVC: 2
3000219: RNCC: 5 | RNVC: 9

2 Dec 2000

3040-01-481-6347
Conv Shoulder Shaft

014816347
10052613: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-482-3101
Straight Shaft

014823101
254-7015355PN18: RNCC: 3 | RNVC: 2
7015355: RNCC: D | RNVC: 9

15 Feb 2001

3040-01-480-7475
Rigid Connecting Link

014807475
12474755-1: RNCC: 3 | RNVC: 2
12474755: RNCC: D | RNVC: 9

5 Dec 2000

3040-01-482-8750
Shouldered Shaft

014828750
312154: RNCC: 3 | RNVC: 2

7 Mar 2001

3040-01-482-9016
Shouldered Shaft

014829016
V2C13752-1: RNCC: 3 | RNVC: 2
V1E10601: RNCC: D | RNVC: 9

8 Mar 2001

3040-01-483-8110
Spline Adapter

014838110
21216-03: RNCC: 3 | RNVC: 2
G2121603: RNCC: 5 | RNVC: 2

9 Apr 2001

3040-01-483-0347
Rigid Connecting Link

014830347
6397269 PC 26: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 66: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

14 Mar 2001

3040-01-484-4689
Shouldered Shaft

014844689
EP-0002977: RNCC: 3 | RNVC: 2
923828.0942: RNCC: 5 | RNVC: 2
9238280942: RNCC: 5 | RNVC: 9

30 Apr 2001

3040-01-484-4847
Linear Actuating Cylinder Assembly

014844847
923828.0743: RNCC: 3 | RNVC: 2
923976.2711: RNCC: 5 | RNVC: 2
9239762711: RNCC: 5 | RNVC: 9

30 Apr 2001

3040-01-491-5727
Flexible Shaft Assembly

014915727
22001-100 X 342IN: RNCC: 3 | RNVC: 2
22001-100 X 28FT 6IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-485-3120
Remote Control Lever

014853120
10587EY: RNCC: 3 | RNVC: 2
4HB547: RNCC: 5 | RNVC: 2
4HB547: RNCC: 5 | RNVC: 9
10587-6: RNCC: D | RNVC: 9

22 May 2001

3040-01-493-2275
Control Cam

014932275
JE943-60/1623943 PIECE 60: RNCC: 3 | RNVC: 2
8100-1253-0071 PC NO 28: RNCC: 3 | RNVC: 2
JE943-60: RNCC: 5 | RNVC: 2
1623943 PIECE 60, DETAIL 14-D: RNCC: 5 | RNVC: 9
8100-1253-0074: RNCC: C | RNVC: 1
8100-1253-0071: RNCC: D | RNVC: 9

20 Dec 2001

3040-01-485-8290
Linear Actuating Cylinder Piston Rod

014858290
5489225-4: RNCC: 3 | RNVC: 2
5489224 ITEM NO. 6: RNCC: 5 | RNVC: 2
5489224: RNCC: D | RNVC: 9
5489225: RNCC: D | RNVC: 9

7 Jun 2001

3040-01-495-0644
Shaft Retaining Plate

014950644
9330760: RNCC: 3 | RNVC: 2
9330760: RNCC: 5 | RNVC: 2
9330770 FIND NO 10: RNCC: 5 | RNVC: 2
9330760: RNCC: 5 | RNVC: 9
9330760: RNCC: 5 | RNVC: 9
9330770: RNCC: D | RNVC: 9

5 Mar 2002

3040-01-486-0581
Linear Actuating Cylinder Cap

014860581
6931003 ITEM 2: RNCC: 3 | RNVC: 2
6931003-2: RNCC: C | RNVC: 1
6931003: RNCC: D | RNVC: 9

18 Jun 2001

3040-01-486-4211
Shaftzshoulderedzzz

014864211
D35-007-1218: RNCC: 3 | RNVC: 2
D35C2500003 ITEM 6: RNCC: 5 | RNVC: 2

28 Jun 2001

3040-01-486-5208
Shouldered Shaft

014865208
593-7067139-6: RNCC: 3 | RNVC: 2
H557-3302-6: RNCC: 5 | RNVC: 2
H577-3302: RNCC: D | RNVC: 9
7067139: RNCC: D | RNVC: 9

2 Jul 2001

3040-01-487-2297
Remote Control Lever

014872297
124-7386972 PC 68: RNCC: 3 | RNVC: 2
124-7386936 PC 22: RNCC: 5 | RNVC: 2
7386936: RNCC: D | RNVC: 9
7386972: RNCC: D | RNVC: 9

30 Jul 2001

3040-01-489-1073
Shaft Collar

014891073
124-4322604 PC 11: RNCC: 3 | RNVC: 2
124-4322603 PC 48: RNCC: 5 | RNVC: 2

12 Sep 2001

3040-01-497-0994
Counterbalance Weight

014970994
5128T01P02: RNCC: 3 | RNVC: 2
5128T0P02: RNCC: 5 | RNVC: 9

9 May 2002

3040-01-494-4659
Manual Control Lever

014944659
6593000093: RNCC: 3 | RNVC: 2

13 Feb 2002

3040-01-499-7666
Trunnion Shaft

014997666
5-601-128: RNCC: 3 | RNVC: 2
5-601-128: RNCC: 5 | RNVC: 2
10367312: RNCC: 6 | RNVC: 9

2 Aug 2002

3040-01-500-8401
Control Cam

015008401
803-1624120 PC 53: RNCC: 3 | RNVC: 2
803-1624129 PC 45: RNCC: 5 | RNVC: 2
1624120: RNCC: D | RNVC: 9
1624129: RNCC: D | RNVC: 9

12 Sep 2002

3040-01-501-0358
Rigid Connecting Link

015010358
566-7067173-57: RNCC: 3 | RNVC: 2
H625-0312-57: RNCC: 5 | RNVC: 2
566-7067173: RNCC: D | RNVC: 9

20 Sep 2002

3040-01-503-3304
Shouldered Shaft

015033304
1320755: RNCC: 3 | RNVC: 2
1320755: RNCC: 5 | RNVC: 9

12 Dec 2002

3040-01-503-6305
Linear Actuating Cylinder Assembly

015036305
N5F-2X24-B-1.38-6-S-V-V-X: RNCC: 3 | RNVC: 2
N5F-2X24-B-1.38-6-S-V-V-X: RNCC: 5 | RNVC: 2
1E9109-0733-01: RNCC: 5 | RNVC: 2
1E9109-0733-01: RNCC: 5 | RNVC: 2
N5F: RNCC: D | RNVC: 9

30 Dec 2002

3040-01-503-7426
Shouldered Shaft

015037426
596-7410507-5: RNCC: 3 | RNVC: 2
596-7410332-4: RNCC: 5 | RNVC: 2
B434-5410-4: RNCC: 5 | RNVC: 2
B434-5412-5: RNCC: 5 | RNVC: 2
7410332: RNCC: D | RNVC: 9
7410507: RNCC: D | RNVC: 9

7 Jan 2003

3040-01-504-2909
Shouldered Shaft

015042909
7138760: RNCC: 3 | RNVC: 2
7138760: RNCC: 5 | RNVC: 9

24 Jan 2003

3040-01-506-0500
Shaft Collar

015060500
743235: RNCC: 3 | RNVC: 2

21 Mar 2003

3040-01-506-3705
Linear Actuating Cylinder Assembly

015063705
GG519546MA: RNCC: 3 | RNVC: 2
5.00CBB2HLTVS14AC43.875: RNCC: 5 | RNVC: 2

28 Mar 2003

3040-01-509-4487
Rigid Connecting Link

015094487
75234: RNCC: 3 | RNVC: 2
75324-1: RNCC: 5 | RNVC: 2

23 Jun 2003

3040-01-512-0682
Tpi Lever

015120682
883081: RNCC: 3 | RNVC: 2

21 Aug 2003

3040-01-512-7935
Control Cam

015127935
JE4174-55: RNCC: 3 | RNVC: 2
803-5184174-55: RNCC: 5 | RNVC: 2
803-5184174: RNCC: D | RNVC: 9

10 Sep 2003

3040-01-512-8595
Flexible Casing Coupling Nut

015128595
20726GB020: RNCC: 3 | RNVC: 2
144396: RNCC: 5 | RNVC: 2
20726GB017 FIND NO 2: RNCC: 5 | RNVC: 2

11 Sep 2003

3040-01-513-0807
Breather

015130807
PM-10667-A: RNCC: 3 | RNVC: 2

17 Sep 2003

3040-01-513-5851
Straight Shaft

015135851
4W4482: RNCC: 3 | RNVC: 2
4W4482 ITEM 1: RNCC: 5 | RNVC: 2
4W4461: RNCC: 5 | RNVC: 9

30 Sep 2003

3040-01-513-6338
Shouldered Shaft

015136338
3324979: RNCC: 3 | RNVC: 2
3324979: RNCC: 3 | RNVC: 9
920800-0422: RNCC: 5 | RNVC: 2

1 Oct 2003

3040-01-515-7230
Cushion Insert

015157230
R433015115: RNCC: 3 | RNVC: 2
P105056-1: RNCC: 5 | RNVC: 9
C193915 REF.24: RNCC: 5 | RNVC: 9

5 Dec 2003

3040-01-515-7537
Rigid Connecting Link

015157537
3042T01P02: RNCC: 3 | RNVC: 2

8 Dec 2003

3040-01-515-7564
Rigid Connecting Link

015157564
3042T01P01: RNCC: 3 | RNVC: 2
3042T01P01: RNCC: 5 | RNVC: 9

8 Dec 2003

3040-01-516-0938
Rigid Connecting Link

015160938
H577-3401-35: RNCC: 3 | RNVC: 2
593-7067141-35: RNCC: 5 | RNVC: 2
7067141: RNCC: D | RNVC: 9

18 Dec 2003

3040-01-516-9213
Tarp Spool Shaft

015169213
1KK196: RNCC: 3 | RNVC: 2
1KK196: RNCC: 3 | RNVC: 9
6509210: RNCC: 5 | RNVC: 9

24 Jan 2004

3040-01-517-7001
Pawl

015177001
465-5381: RNCC: 3 | RNVC: 9
465-5381: RNCC: 5 | RNVC: 2
2 0078-777: RNCC: 5 | RNVC: 2
465-5381: RNCC: 5 | RNVC: 2
10055734: RNCC: 6 | RNVC: 9
3040PL1495417: RNCC: 6 | RNVC: 9
465-5381: RNCC: C | RNVC: 1

18 Feb 2004

3040-01-518-4271
Shaft Collar

015184271
2187389: RNCC: 3 | RNVC: 2

11 Mar 2004

3040-01-518-6539
Shaft-Bearing

015186539
EJ21237: RNCC: 3 | RNVC: 2
EJ-5022 ITEM 9: RNCC: C | RNVC: 1

18 Mar 2004

3040-01-519-3822
Flexible Shaft Assembly

015193822
7578689-001: RNCC: 3 | RNVC: 2
7578689-001: RNCC: 5 | RNVC: 2
7578689-001: RNCC: 5 | RNVC: 2

15 Apr 2004

3040-01-519-8307
Anti-Rotation Tube

015198307
820629-1: RNCC: 3 | RNVC: 2
820629: RNCC: D | RNVC: 9

4 May 2004

3040-01-520-3628
Spur Gearshaft

015203628
167-6404600 FIND 69: RNCC: 3 | RNVC: 2
211076682: RNCC: 5 | RNVC: 2

10 May 2004

3040-01-522-1342
Nonaircraft Mechanical Actuator

015221342
15881603-1: RNCC: 3 | RNVC: 2
15881603-1: RNCC: 3 | RNVC: 9
1588 ITEM 10: RNCC: 5 | RNVC: 9
1588 ITEM 10: RNCC: C | RNVC: 1

20 Jul 2004

3040-01-521-9011
Mechanical Drive Housing

015219011
16-1970-1: RNCC: 3 | RNVC: 2
16-1970: RNCC: 5 | RNVC: 9

9 Jul 2004

3040-01-522-2128
Bevel Gear And Shaft Assembly

015222128
064 098: RNCC: 3 | RNVC: 2
300-064098: RNCC: 5 | RNVC: 2

22 Jul 2004

3040-01-523-3990
Detent Plate

015233990
865711A02: RNCC: 3 | RNVC: 2
14497A2: RNCC: 5 | RNVC: 9

1 Sep 2004

3040-01-523-7532
Shaft Retaining Plate

015237532
754-6726717-AY97: RNCC: 3 | RNVC: 2
211096747: RNCC: 5 | RNVC: 2

15 Sep 2004

3040-01-525-5203
Straight Shaft

015255203
111203: RNCC: 3 | RNVC: 2

15 Nov 2004

3040-01-526-2829
Pawl

015262829
05044800: RNCC: 3 | RNVC: 2

14 Dec 2004

3040-01-526-4293
Push-Pull Control Assembly Parts Kit

015264293
65204-00: RNCC: 3 | RNVC: 2

16 Dec 2004

3040-01-526-4897
Flexible Shaft Assembly

015264897
57353-130FT0IN: RNCC: 3 | RNVC: 2

20 Dec 2004

3040-01-526-2206
Shouldered Shaft

015262206
33902340: RNCC: 3 | RNVC: 2

11 Dec 2004

3040-01-461-5949
Piston Rod Guide

014615949
3608786-6: RNCC: 3 | RNVC: 2
3608786: RNCC: D | RNVC: 9

18 Dec 1998

3040-01-461-3297
Straight Axle

014613297
2559791-6: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-462-4284
Straight Shaft

014624284
65396-00014-103: RNCC: 3 | RNVC: 2

3 Feb 1999

3040-01-484-6546
Spline Adapter

014846546
3025320: RNCC: 3 | RNVC: 2
3025320: RNCC: 5 | RNVC: 2

3 May 2001

3040-01-491-9436
Lever And Roller Assembly

014919436
EJ-32064: RNCC: 3 | RNVC: 2
EJ-22114 ITEM 3: RNCC: 5 | RNVC: 2

7 Nov 2001

3040-01-485-5129
Extension Shaft

014855129
556-7106779-67: RNCC: 3 | RNVC: 2
H79208002-67: RNCC: 5 | RNVC: 2
H792-8002-67: RNCC: C | RNVC: 1
7106779: RNCC: D | RNVC: 9

30 May 2001

3040-01-493-8852
Rigid Connecting Link

014938852
8100-1251-0192: RNCC: 1 | RNVC: 2
8100-1251-0192 PC 152 & 153: RNCC: 3 | RNVC: 2

24 Jan 2002

3040-01-485-9342
Straight Shaft

014859342
167-7066804-84: RNCC: 3 | RNVC: 2
H547-2002-84: RNCC: 5 | RNVC: 2
7066804: RNCC: D | RNVC: 9

12 Jun 2001

3040-01-457-1160
Piston Rod Guide

014571160
21338-1004-1: RNCC: 3 | RNVC: 2
21338 FIND 15: RNCC: 5 | RNVC: 9

13 Jul 1998

3040-01-458-2805
Shouldered Shaft

014582805
G10532G1: RNCC: 3 | RNVC: 2
36B511081G1: RNCC: 5 | RNVC: 9
36B511081G1: RNCC: 5 | RNVC: 9

20 Aug 1998

3040-01-458-1499
Rigid Connecting Link

014581499
845-7069127-X-41: RNCC: 3 | RNVC: 1

14 Aug 1998

3040-01-459-0031
Housing Adapter

014590031
8926638: RNCC: 3 | RNVC: 2
2GH690: RNCC: 5 | RNVC: 2
2GH690: RNCC: 5 | RNVC: 9

17 Sep 1998

3040-01-460-0968
Straight Shaft

014600968
12466643: RNCC: 3 | RNVC: 2

27 Oct 1998

3040-01-461-3328
Manual Control Lever

014613328
1378AS271-1: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-461-3296
Mechanical Drive Housing

014613296
64A98D281-3: RNCC: 3 | RNVC: 2

9 Dec 1998

3040-01-462-2140
Linear Actuating Cylinder Assembly

014622140
AG189985F: RNCC: 3 | RNVC: 2
5038011: RNCC: 5 | RNVC: 9
2.50 CBB-2HLTVS14C X 4.250: RNCC: 5 | RNVC: 9

26 Jan 1999

3040-01-467-9099
Linear Actuating Cylinder Assembly

014679099
AG201172A0: RNCC: 3 | RNVC: 2

20 Sep 1999

3040-01-468-0848
Nonaircraft Mechanical Actuator

014680848
J15662091-2: RNCC: 3 | RNVC: 2
15662091-2: RNCC: 3 | RNVC: 9
15666126-2: RNCC: 5 | RNVC: 9
15662090 FN 28: RNCC: 5 | RNVC: 9
15662091-2: RNCC: 5 | RNVC: 9
15662090 FN 28: RNCC: 5 | RNVC: 9
15666126-2: RNCC: 5 | RNVC: 9

28 Sep 1999

3040-01-469-6547
Rigid Connecting Link

014696547
821338-1: RNCC: 3 | RNVC: 2

18 Nov 1999

3040-01-469-6631
Control Cam

014696631
814325-1: RNCC: 3 | RNVC: 2

18 Nov 1999

3040-01-469-6327
Piston Ring

014696327
742B8MT-161-P20: RNCC: 3 | RNVC: 2
264438: RNCC: 5 | RNVC: 2

17 Nov 1999

3040-01-471-9296
Counterbalance Weight

014719296
901-015-024-107: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-462-9514
Straight Shaft

014629514
GTXZ-99-07-41: RNCC: 3 | RNVC: 9
GXLF-99-16-016-0: RNCC: 5 | RNVC: 2
GTXZ-99-07-41: RNCC: 5 | RNVC: 9

25 Feb 1999

3040-01-462-9997
Linear Actuating Cylinder Assembly Parts Kit

014629997
PK252HK001: RNCC: 3 | RNVC: 2

1 Mar 1999

3040-01-463-1714
Rigid Connecting Link

014631714
803-6397269 PC79 ZINC PLATED: RNCC: 3 | RNVC: 2
167-6926161 PC79 ZINC PLATED: RNCC: 5 | RNVC: 2
803-6397269 PC NO 79: RNCC: 5 | RNVC: 2
8100-1251-0307 PC NO 105: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

10 Mar 1999

3040-01-463-4095
Straight Axle

014634095
L20500-6: RNCC: 3 | RNVC: 2

19 Mar 1999

3040-01-463-9488
Hydraulic Accumulator Cylinder

014639488
845-7325735-1: RNCC: 3 | RNVC: 2
845-7325735-1: RNCC: 5 | RNVC: 2
845-4457601 PIECE 1: RNCC: 5 | RNVC: 9
7325735: RNCC: D | RNVC: 9

10 Apr 1999

3040-01-463-9109
Rigid Connecting Link

014639109
803-6397268 PC 71: RNCC: 3 | RNVC: 2
6926161 PC 71: RNCC: 5 | RNVC: 2
803-6397268 PC 73 ZINC PLATED: RNCC: 5 | RNVC: 2
803-6397269 PC 45: RNCC: 5 | RNVC: 2
6397269: RNCC: D | RNVC: 9

8 Apr 1999

3040-01-465-1746
Manual Control Lever

014651746
530256: RNCC: 3 | RNVC: 2
530256: RNCC: 5 | RNVC: 9
530256: RNCC: 5 | RNVC: 9

25 May 1999

3040-01-465-6003
Pawl

014656003
160840-76530: RNCC: 3 | RNVC: 9
160840-76530: RNCC: 5 | RNVC: 2
160840-76530: RNCC: 5 | RNVC: 2
160840-76530: RNCC: 5 | RNVC: 9
160840-76530: RNCC: 5 | RNVC: 9
160840-76530: RNCC: C | RNVC: 1

15 Jun 1999

3040-01-466-7098
Counterbalance Weight

014667098
901-015-024-103: RNCC: 3 | RNVC: 2

29 Jul 1999

3040-01-466-5901
Linear Actuating Cylinder Piston Rod

014665901
3253307-1: RNCC: 3 | RNVC: 2
3798329-1-8: RNCC: 3 | RNVC: 2
3253307-A: RNCC: C | RNVC: 1
3253307: RNCC: D | RNVC: 9

26 Jul 1999

3040-01-467-4681
Mechanical Drive Housing

014674681
A2-3200-W-1869: RNCC: 3 | RNVC: 2
A2-3200-W-1869: RNCC: 5 | RNVC: 2

31 Aug 1999

3040-01-467-9092
Linear Actuating Cylinder Assembly

014679092
AG201176F0: RNCC: 3 | RNVC: 2

20 Sep 1999

3040-01-473-3738
Shouldered Shaft

014733738
SGT519-2: RNCC: 3 | RNVC: 2
SGT519-2: RNCC: 5 | RNVC: 1

6 Apr 2000

3040-01-473-8407
Straight Shaft

014738407
AT180041: RNCC: 3 | RNVC: 9
AT180041: RNCC: 5 | RNVC: 9

18 Apr 2000

3040-01-474-4373
Rigid Connecting Link

014744373
124-4322615 PC 57: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

3 May 2000

3040-01-474-9198
Mechanically Actuated Spindle

014749198
124-4322618 PC 21: RNCC: 3 | RNVC: 2
1522-41: RNCC: D | RNVC: 9

17 May 2000

3040-01-475-5307
Rigid Connecting Link

014755307
124-4322615 PC 17: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

7 Jun 2000

3040-01-475-9145
Pawl

014759145
4660898: RNCC: 3 | RNVC: 2
4660898: RNCC: 3 | RNVC: 9
4660898: RNCC: 5 | RNVC: 2

19 Jun 2000

3040-01-475-9618
Shouldered Shaft

014759618
1725185: RNCC: 3 | RNVC: 2

20 Jun 2000

3040-01-476-1994
Barrel Cam

014761994
721-7070284-48: RNCC: 3 | RNVC: 2
7070284-0048: RNCC: 5 | RNVC: 2
H864-1401-48: RNCC: 5 | RNVC: 9
7070284-48: RNCC: 5 | RNVC: 9
7070284: RNCC: D | RNVC: 9

29 Jun 2000

3040-01-476-1449
Shouldered Shaft

014761449
13225E9552-4: RNCC: 3 | RNVC: 2
13225E9552: RNCC: D | RNVC: 9

27 Jun 2000

3040-01-477-7889
Body Hub

014777889
9904106186: RNCC: 3 | RNVC: 2

18 Aug 2000

3040-01-477-9645
Straight Shaft

014779645
12447060-1: RNCC: 3 | RNVC: 2
12447060-1: RNCC: 5 | RNVC: 2
3040PL0837146: RNCC: 6 | RNVC: 9
12447060: RNCC: D | RNVC: 9

25 Aug 2000

NSN 3040-01-478-0406 014780406 SHAFT ASSEMBLY,STRAIGHT

3040-01-478-0406
Straight Shaft Assembly

014780406
216643: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-477-6064
Linear Actuating Cylinder Cap

014776064
6372005827: RNCC: 3 | RNVC: 2

14 Aug 2000

3040-01-478-1869
Rigid Connecting Link

014781869
74A463605-1001: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-1991
Transmission Sleeve

014781991
767578: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-3282
Hyd Filter Parts Kt

014783282
FTS-0001: RNCC: 3 | RNVC: 2

7 Sep 2000

3040-01-478-3624
Nonaircraft Mechanical Actuator

014783624
240652: RNCC: 3 | RNVC: 2
243245: RNCC: C | RNVC: 1

8 Sep 2000

3040-01-478-8203
Ai Splined Coupling

014788203
2746347-1: RNCC: 3 | RNVC: 2

28 Sep 2000

3040-01-479-8312
Straight Shaft

014798312
HABG002: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-480-7536
Planetary Gears Carrier

014807536
8675611: RNCC: 3 | RNVC: 9
5714593: RNCC: 5 | RNVC: 2
24241409: RNCC: 5 | RNVC: 2
24212052: RNCC: 5 | RNVC: 9
3040PL1943792: RNCC: 6 | RNVC: 9

5 Dec 2000

3040-01-481-0003
Rigid Connecting Link

014810003
74A640068-1001: RNCC: 3 | RNVC: 2

14 Dec 2000

3040-01-481-2046
Rigid Connecting Link

014812046
8100-1256-0262 PT NO 221: RNCC: 3 | RNVC: 2
8100-1256-0262: RNCC: D | RNVC: 9

21 Dec 2000

3040-01-481-0542
Control Cam

014810542
2643-670-01-13: RNCC: 3 | RNVC: 2
845-7108792-13: RNCC: 5 | RNVC: 2
2643-670-01: RNCC: D | RNVC: 9
7108792: RNCC: D | RNVC: 9

15 Dec 2000

3040-01-482-3276
Mechanically Actuated Spindle

014823276
803-6397269 PC 96: RNCC: 3 | RNVC: 2
8100-1251-0308 PC NO 96: RNCC: 5 | RNVC: 2
6397269: RNCC: D | RNVC: 9
8100-1251-0308: RNCC: D | RNVC: 9

15 Feb 2001

3040-01-482-4678
Rigid Connecting Link

014824678
8100-1251-0307 PC NO 56: RNCC: 3 | RNVC: 2
8100-1251-0192 PC 135: RNCC: 3 | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9
8100-1251-0192: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

23 Feb 2001

3040-01-482-7691
Linear Actuating Cylinder Piston Rod

014827691
3253363-1: RNCC: 3 | RNVC: 2
3253363-1: RNCC: 5 | RNVC: 9
3799813 FIND 21: RNCC: 5 | RNVC: 9
3799813: RNCC: D | RNVC: 9

2 Mar 2001

3040-01-482-9542
Bell Crank

014829542
L6410350-013: RNCC: 3 | RNVC: 2
L6410350: RNCC: D | RNVC: 9

9 Mar 2001

3040-01-483-4417
Brake Disc

014834417
74771: RNCC: 3 | RNVC: 2

29 Mar 2001

3040-01-484-6183
Rotating Shaft Eye Bracket

014846183
3896335: RNCC: 3 | RNVC: 2

2 May 2001

3040-01-484-6583
Shouldered Shaft

014846583
3070072: RNCC: 3 | RNVC: 2
3070072: RNCC: 5 | RNVC: 2

3 May 2001

3040-01-483-0341
Rigid Connecting Link

014830341
6397269 PC NO 26: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 52: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

14 Mar 2001

3040-01-488-7612
Mechanically Actuated Spindle

014887612
5D87161-001: RNCC: 3 | RNVC: 2
6510E68FN16: RNCC: 5 | RNVC: 2
6510E68: RNCC: D | RNVC: 9
5D87161: RNCC: D | RNVC: 9

4 Sep 2001

3040-01-493-2180
Flexible Shaft Assembly

014932180
22001-100 X 452IN: RNCC: 3 | RNVC: 2
B-409-22001: RNCC: D | RNVC: 9

20 Dec 2001

3040-01-494-4654
Shouldered Shaft

014944654
6810003244: RNCC: 3 | RNVC: 2

13 Feb 2002

3040-01-495-7628
Pivot Block

014957628
8325-1: RNCC: 3 | RNVC: 2
1028-1: RNCC: 3 | RNVC: 9

25 Mar 2002

3040-01-490-4286
Airc Spline Adapter

014904286
101999-15-1: RNCC: 3 | RNVC: 2

27 Sep 2001

3040-01-495-9856
Linear Actuating Cylinder Assembly

014959856
02040: RNCC: 3 | RNVC: 2

29 Mar 2002

3040-01-496-9007
Counterbalance Weight

014969007
5126T45P01: RNCC: 3 | RNVC: 2

1 May 2002

3040-01-496-3675
Mechanically Actuated Spindle

014963675
29537935: RNCC: 3 | RNVC: 2
22KP842: RNCC: 5 | RNVC: 1

12 Apr 2002

3040-01-497-3016
Transmission Sleeve

014973016
41305: RNCC: 3 | RNVC: 2
LA424-41300 ITEM 5: RNCC: 5 | RNVC: 2
LA424-41300: RNCC: D | RNVC: 9

16 May 2002

3040-01-498-4292
Straight Shaft

014984292
518-4457096-52: RNCC: 3 | RNVC: 2
4457096-0052: RNCC: 5 | RNVC: 2
2013-54-52: RNCC: 5 | RNVC: 9
4457096-52: RNCC: 5 | RNVC: 9
2013-54-52: RNCC: 5 | RNVC: 9
H600-2013-54-52: RNCC: 5 | RNVC: 9
518-4457096: RNCC: D | RNVC: 9

26 Jun 2002

3040-01-498-4354
Stub Shaft Special

014984354
124A8400AR001: RNCC: 3 | RNVC: 1
36R937015ABPC23: RNCC: 5 | RNVC: 1

26 Jun 2002

3040-01-499-6572
Nonrotating Shaft Eye Bracket

014996572
11-1-7004-1: RNCC: 3 | RNVC: 2

30 Jul 2002

3040-01-499-9429
Bell Crank

014999429
563-7066808-A37: RNCC: 3 | RNVC: 2
563-7066806-15: RNCC: 5 | RNVC: 2
H552-0601-15: RNCC: 5 | RNVC: 2
H552-0603-A37: RNCC: 5 | RNVC: 2
563-7066808: RNCC: D | RNVC: 9

8 Aug 2002

3040-01-500-4939
Linear Actuating Cylinder Assembly

015004939
3860881: RNCC: 3 | RNVC: 2
3860881: RNCC: 5 | RNVC: 2
872837-0: RNCC: 5 | RNVC: 9
872837-0: RNCC: 5 | RNVC: 9
3860881: RNCC: 5 | RNVC: 9
872837-0: RNCC: 5 | RNVC: 9

28 Aug 2002

3040-01-499-8063
Mechanically Actuated Spindle

014998063
167-7379128 ITEM 31: RNCC: 3 | RNVC: 2
7379128: RNCC: D | RNVC: 9

5 Aug 2002

3040-01-499-8061
Mechanically Actuated Spindle

014998061
167-7379128 ITEM 25: RNCC: 3 | RNVC: 2
25: RNCC: 5 | RNVC: 2
7379128: RNCC: D | RNVC: 9

5 Aug 2002

3040-01-501-7529
Shouldered Shaft

015017529
44-62820T 1: RNCC: 3 | RNVC: 2

15 Oct 2002

3040-01-503-2438
Rigid Connecting Link

015032438
4724-101: RNCC: 3 | RNVC: 2
74J678008-101: RNCC: 5 | RNVC: 2

10 Dec 2002

3040-01-503-3664
Manual Control Lever

015033664
MC14172: RNCC: 3 | RNVC: 2
MC14172: RNCC: 5 | RNVC: 9
MC14172: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-3486
Universal Drive Shaft

015033486
70022052: RNCC: 3 | RNVC: 2
501007034: RNCC: 5 | RNVC: 9
1321176: RNCC: 5 | RNVC: 9
501007939: RNCC: 5 | RNVC: 9
1321176: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-4581
Shouldered Shaft

015034581
596-7409754-9: RNCC: 3 | RNVC: 2
B831-7120-9: RNCC: 5 | RNVC: 2
7409754-9: RNCC: D | RNVC: 9

18 Dec 2002

3040-01-503-5706
Assembly Dead Bolt Shaft

015035706
596-7409749-A10: RNCC: 3 | RNVC: 2
596-7409742-95: RNCC: 5 | RNVC: 2
B831-6000-95: RNCC: 5 | RNVC: 2
B831-6600-A10: RNCC: 5 | RNVC: 2
B831-6000: RNCC: D | RNVC: 9
7409742: RNCC: D | RNVC: 9

23 Dec 2002

3040-01-503-6580
Rigid Connecting Link

015036580
6623569: RNCC: 3 | RNVC: 2
6623569: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-9170
Linear Actuating Cylinder Assembly

015039170
XA2524R13-1: RNCC: 3 | RNVC: 2
255-450 ITEM 19: RNCC: 5 | RNVC: 2

13 Jan 2003

3040-01-504-2438
Linear Actuating Cylinder Piston

015042438
595-7067878-3: RNCC: 3 | RNVC: 2
H692-1805-3: RNCC: 5 | RNVC: 2
7067878: RNCC: D | RNVC: 9

23 Jan 2003

3040-01-504-9958
Rigid Connecting Link

015049958
3518-18: RNCC: 3 | RNVC: 2

18 Feb 2003

3040-01-505-0945
Remote Control Lever

015050945
3528-7: RNCC: 3 | RNVC: 2
3528 ITEM 4: RNCC: 5 | RNVC: 2

21 Feb 2003

3040-01-505-1163
Rigid Connecting Link

015051163
69-10938: RNCC: 3 | RNVC: 2
69-10938: RNCC: 5 | RNVC: 9

24 Feb 2003

3040-01-503-7187
Handwheel Stud

015037187
82A5027A1682: RNCC: 3 | RNVC: 2

6 Jan 2003

3040-01-509-0411
Nonrotating Shaft Eye Bracket

015090411
7004078: RNCC: 3 | RNVC: 2

10 Jun 2003

3040-01-509-9780
Shouldered Shaft

015099780
7249551: RNCC: 3 | RNVC: 2

10 Jul 2003

3040-01-509-7697
Piston Follower Cup

015097697
172-489: RNCC: 3 | RNVC: 2

2 Jul 2003

3040-01-512-0389
Shift Shaft

015120389
824145: RNCC: 3 | RNVC: 2
824145: RNCC: 5 | RNVC: 2

21 Aug 2003

3040-01-511-9560
Nonrotating Shaft Eye Bracket

015119560
854653 1: RNCC: 3 | RNVC: 2
896662: RNCC: 5 | RNVC: 2
8M0039052: RNCC: 5 | RNVC: 2

20 Aug 2003

3040-01-512-8748
Body Hub

015128748
0744690: RNCC: 3 | RNVC: 2

11 Sep 2003

3040-01-513-9602
Spur Gearshaft

015139602
419-0025-01: RNCC: 3 | RNVC: 2
419-0025-01: RNCC: 3 | RNVC: 9

10 Oct 2003

3040-01-514-1915
Brake Disc

015141915
3D1099: RNCC: 3 | RNVC: 2

20 Oct 2003

3040-01-514-6669
Shouldered Shaft

015146669
P-10731: RNCC: 3 | RNVC: 2

31 Oct 2003

3040-01-514-4057
Manual Control Lever

015144057
DN60-1.5-18: RNCC: 3 | RNVC: 2
DN60-1.5-18: RNCC: 3 | RNVC: 9
DNX62-1.5H3-000 ITEM 31: RNCC: 5 | RNVC: 9
DNX62-1.5H3-000 ITEM 31: RNCC: C | RNVC: 1
DNX62-1.5H3-000: RNCC: D | RNVC: 9

24 Oct 2003

3040-01-515-6134
Control Cable Assembly

015156134
1018981: RNCC: 3 | RNVC: 2
ID83CC-1.50: RNCC: 5 | RNVC: 9

2 Dec 2003

3040-01-515-7250
Kit

015157250
P182149: RNCC: 3 | RNVC: 2
C193915 REF.5B,5C,5D,5E,5F: RNCC: 5 | RNVC: 2

5 Dec 2003

3040-01-515-7536
Linear Actuating Cylinder Piston

015157536
R433045247: RNCC: 3 | RNVC: 9
C405327 REF.13,17,19: RNCC: 5 | RNVC: 2
P194123-0250: RNCC: 5 | RNVC: 9
P194123-0250: RNCC: 5 | RNVC: 9

8 Dec 2003

3040-01-515-5520
Linear Actuating Cylinder Piston

015155520
42118: RNCC: 3 | RNVC: 2
12M23-42110 ITEM 8: RNCC: 5 | RNVC: 2
12M23-42110: RNCC: D | RNVC: 9

1 Dec 2003

3040-01-516-5277
Flexible Shaft Assembly

015165277
57353-44: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-515-6896
Linear Actuating Cylinder

015156896
R433011935: RNCC: 3 | RNVC: 2
173732: RNCC: 5 | RNVC: 2
C405327 REV A: RNCC: 5 | RNVC: 9
C405327-0250: RNCC: 5 | RNVC: 9
R433011935: RNCC: 5 | RNVC: 9

4 Dec 2003

3040-01-516-6450
Shouldered Shaft

015166450
3637AS683-2: RNCC: 3 | RNVC: 2
3637AS683: RNCC: D | RNVC: 9

14 Jan 2004

3040-01-516-5272
Flexible Shaft Assembly

015165272
57353-58: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-517-7473
Straight Shaft

015177473
465-5098: RNCC: 3 | RNVC: 2
465-5098: RNCC: 3 | RNVC: 9
465-5098: RNCC: 5 | RNVC: 2

18 Feb 2004

3040-01-517-7817
Straight Shaft

015177817
465-5076: RNCC: 3 | RNVC: 2
465-5076: RNCC: 3 | RNVC: 9
465-5076: RNCC: 5 | RNVC: 2
10105651: RNCC: 6 | RNVC: 9
3040PL1496144: RNCC: 6 | RNVC: 9

19 Feb 2004

3040-01-518-2005
Brake Disc

015182005
PL76222 ITEM 11: RNCC: 3 | RNVC: 9
74349: RNCC: 5 | RNVC: 2

4 Mar 2004

3040-01-519-2221
Manual Control Lever

015192221
660150017: RNCC: 3 | RNVC: 2

9 Apr 2004

3040-01-518-6624
Straight Shaft

015186624
7403272: RNCC: 3 | RNVC: 2

18 Mar 2004

3040-01-520-3604
Spur Gearshaft

015203604
167-6404600 FIND 76: RNCC: 3 | RNVC: 2
211063400: RNCC: 5 | RNVC: 2

10 May 2004

3040-01-521-2075
Bell Crank

015212075
709F4111: RNCC: 3 | RNVC: 2

14 Jun 2004

3040-01-521-1855
Bell Crank

015211855
709F4265: RNCC: 3 | RNVC: 2

14 Jun 2004

3040-01-522-0152
Friction Lining Set

015220152
040-210-00: RNCC: 3 | RNVC: 9

14 Jul 2004

3040-01-522-2134
Nonaircraft Mechanical Actuator

015222134
B831-9233-9: RNCC: 3 | RNVC: 2
596-7410248-71: RNCC: 5 | RNVC: 1
B831-9512-71: RNCC: 5 | RNVC: 1
596-7410426-9: RNCC: 5 | RNVC: 2

22 Jul 2004

3040-01-522-5573
Manual Control Lever

015225573
K1394: RNCC: 3 | RNVC: 2

4 Aug 2004

3040-01-522-6245
Straight Shaft

015226245
115-9403: RNCC: 3 | RNVC: 2
5KK10: RNCC: 5 | RNVC: 2
5KK10: RNCC: 5 | RNVC: 9

5 Aug 2004

3040-01-523-0720
Shouldered Shaft Assembly

015230720
70700-20130-044: RNCC: 3 | RNVC: 2
70700-20130: RNCC: D | RNVC: 9

19 Aug 2004

3040-01-523-4615
Breather

015234615
9R9925: RNCC: 3 | RNVC: 2
9R-9925: RNCC: 5 | RNVC: 2

3 Sep 2004

3040-01-523-5958
Housing Adapter

015235958
HM025-417-1: RNCC: 3 | RNVC: 2
HM025-417: RNCC: D | RNVC: 9

9 Sep 2004

3040-01-523-3994
Shaft Collar

015233994
23-86770: RNCC: 3 | RNVC: 2

1 Sep 2004

3040-01-524-2829
Straight Shaft

015242829
0223-02383-033: RNCC: 3 | RNVC: 2
0221-12662-922 REF 8: RNCC: 5 | RNVC: 2

28 Sep 2004

3040-01-524-3231
Rigid Connecting Link

015243231
123077: RNCC: 3 | RNVC: 2

29 Sep 2004

3040-01-525-0719
Hub Clamp

015250719
SSTGK-1: RNCC: 3 | RNVC: 9
247211: RNCC: 5 | RNVC: 2

27 Oct 2004

3040-01-524-7586
Nonrotating Shaft Eye Bracket

015247586
12488056: RNCC: 3 | RNVC: 2

15 Oct 2004

3040-01-526-4595
Straight Shaft

015264595
26-13781-2: RNCC: 3 | RNVC: 2
26-13781: RNCC: D | RNVC: 9

16 Dec 2004

3040-01-526-4906
Flexible Shaft Assembly

015264906
65042-147FT0IN: RNCC: 3 | RNVC: 2

20 Dec 2004

3040-01-526-5121
Flexible Shaft Assembly

015265121
65042-145FT0IN: RNCC: 3 | RNVC: 2

21 Dec 2004

3040-01-526-5871
Push-Pull Control Assembly

015265871
200-04333-0096: RNCC: 3 | RNVC: 2

23 Dec 2004

3040-01-471-9750
Spline Adapter

014719750
901-046-615-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-8474
Mechanically Actuated Spindle

014728474
124-4322618 PC3B: RNCC: 3 | RNVC: 2
124-4322618 PC 3: RNCC: 5 | RNVC: 9
124-4322618 PC: RNCC: C | RNVC: 1

20 Mar 2000

3040-01-476-3773
Mechanically Actuated Spindle

014763773
124-4322609 PC 39: RNCC: 3 | RNVC: 2
4322609: RNCC: D | RNVC: 9

11 Jul 2000

3040-01-476-3951
Rigid Connecting Link

014763951
HN152-1103 PART NO. 56: RNCC: 3 | RNVC: 2
HN152-1104 PART NO. 32: RNCC: 5 | RNVC: 2

11 Jul 2000

3040-01-476-9890
Shaft Retaining Plate

014769890
6308000209: RNCC: 3 | RNVC: 2

27 Jul 2000

3040-01-491-5718
Flexible Shaft Assembly

014915718
22001-100 X 136IN: RNCC: 3 | RNVC: 2
22001-100 X 11FT 4IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-493-4213
Spur Gearshaft

014934213
596-7409770-5: RNCC: 3 | RNVC: 2
B831-9231-5: RNCC: 5 | RNVC: 2
B831-9231: RNCC: D | RNVC: 9
7409770: RNCC: D | RNVC: 9

7 Jan 2002

3040-01-488-8232
Shouldered Shaft

014888232
5D87954-001: RNCC: 3 | RNVC: 2
6512E47FN6: RNCC: 5 | RNVC: 2
5D87954: RNCC: D | RNVC: 9
6512E47: RNCC: D | RNVC: 9

5 Sep 2001

3040-01-488-9674
Linear Actuating Cylinder

014889674
372 5033 801: RNCC: 3 | RNVC: 2

7 Sep 2001

3040-01-490-3175
Thr Brkt Brg Cap

014903175
6514E15-001: RNCC: 3 | RNVC: 2
6514E15: RNCC: D | RNVC: 9

25 Sep 2001

3040-01-491-0849
Mechanical Drive Housing

014910849
12007303: RNCC: 3 | RNVC: 2

12 Oct 2001

3040-01-506-0692
Straight Axle

015060692
300-5442: RNCC: 3 | RNVC: 2
130-0484: RNCC: 3 | RNVC: 9

21 Mar 2003

3040-01-457-0460
Flexible Drive Shaft

014570460
12976082-1: RNCC: 1 | RNVC: 2
12976082-1: RNCC: 3 | RNVC: 2
12976082: RNCC: D | RNVC: 9

9 Jul 1998

3040-01-457-2968
Shouldered Shaft

014572968
9Y-4935: RNCC: 3 | RNVC: 2

18 Jul 1998

3040-01-461-7911
Control Pedal Assembly

014617911
1378AS282-1: RNCC: 3 | RNVC: 2
1378AS282: RNCC: D | RNVC: 9

5 Jan 1999

3040-01-461-9927
Linear Actuating Cylinder Assembly

014619927
AG189984D0: RNCC: 3 | RNVC: 2
2.00CKJB-2HLTVS14/14C X 6.000: RNCC: 5 | RNVC: 9
5038050: RNCC: 5 | RNVC: 9

14 Jan 1999

3040-01-462-0126
Straight Shaft

014620126
3141AS442-501: RNCC: 3 | RNVC: 2
3141AS442-501: RNCC: 5 | RNVC: 2
3141AS442: RNCC: D | RNVC: 9

15 Jan 1999

3040-01-462-2316
Counterbalance Weight

014622316
9524M50P03: RNCC: 3 | RNVC: 2
9524M50P03: RNCC: 5 | RNVC: 2

26 Jan 1999

3040-01-469-1954
Linear Actuating Cylinder Assembly

014691954
AG201173E0: RNCC: 3 | RNVC: 2

5 Nov 1999

3040-01-469-1464
Control Cam

014691464
2680757: RNCC: 3 | RNVC: 2
2680757: RNCC: 5 | RNVC: 2
10173853: RNCC: 6 | RNVC: 9

4 Nov 1999

3040-01-470-3118
Rigid Connecting Link

014703118
124-4365530 PC 12: RNCC: 3 | RNVC: 2
124-4365530: RNCC: D | RNVC: 9

15 Dec 1999

3040-01-470-6226
Mechanical Drive Housing

014706226
128-3883: RNCC: 3 | RNVC: 2
128-3883: RNCC: 5 | RNVC: 2
CV132400: RNCC: 5 | RNVC: 2

29 Dec 1999

3040-01-470-9615
Ball Joint

014709615
5339D: RNCC: 3 | RNVC: 2
37829: RNCC: 5 | RNVC: 2
37829: RNCC: 5 | RNVC: 9
S-5339D: RNCC: 5 | RNVC: 9

18 Jan 2000

3040-01-470-5803
Shaft As Lifter

014705803
139-9476: RNCC: 3 | RNVC: 2
23KP134: RNCC: 5 | RNVC: 1
139-9476: RNCC: 5 | RNVC: 2
CV133710: RNCC: 5 | RNVC: 2

27 Dec 1999

3040-01-471-9316
Counterbalance Weight

014719316
901-015-062-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-2560
Linear Actuating Cylinder Assembly

014722560
6623240: RNCC: 3 | RNVC: 2
6623240: RNCC: 5 | RNVC: 9

24 Feb 2000

3040-01-463-1927
Shouldered Shaft

014631927
7005528-1: RNCC: 3 | RNVC: 2

10 Mar 1999

3040-01-463-2377
Shouldered Shaft

014632377
45M-507: RNCC: 3 | RNVC: 2
EAOM-513-NF2-3W ITEM2: RNCC: 5 | RNVC: 9

12 Mar 1999

3040-01-463-4098
Straight Axle

014634098
L-20500-5: RNCC: 3 | RNVC: 2

19 Mar 1999

3040-01-463-4250
Rigid Connecting Link

014634250
803-6397269 PC37 ZINC PLATED: RNCC: 3 | RNVC: 2
167-6926161 PC188 ZINC PLATED: RNCC: 5 | RNVC: 2
8100-1251-0307 PC NO 63: RNCC: C | RNVC: 1
6397269: RNCC: D | RNVC: 9

19 Mar 1999

3040-01-464-2345
Shouldered Shaft

014642345
9914.0250 SHAFT(E-COATED), 9" L: RNCC: 3 | RNVC: 2
9914.0251: RNCC: 5 | RNVC: 9
IS0-18-12: RNCC: D | RNVC: 9

22 Apr 1999

3040-01-464-4069
Brake Disc

014644069
328714W: RNCC: 3 | RNVC: 2

28 Apr 1999

3040-01-464-7811
Rigid Connecting Link

014647811
805-1400074 PC 11: RNCC: 3 | RNVC: 2
074-11: RNCC: C | RNVC: 1
805-1400074: RNCC: D | RNVC: 9

10 May 1999

3040-01-466-7898
Flexible Shaft Assembly

014667898
GTC-702-25: RNCC: 3 | RNVC: 2

2 Aug 1999

3040-01-466-8135
Adjuster Ring

014668135
6138842: RNCC: 3 | RNVC: 2

3 Aug 1999

3040-01-467-9026
Linear Actuating Cylinder Assembly

014679026
AG201176C0: RNCC: 3 | RNVC: 2

20 Sep 1999

3040-01-473-8403
Linear Actuating Cylinder

014738403
4645992: RNCC: 3 | RNVC: 9
AT178705: RNCC: 5 | RNVC: 9

18 Apr 2000

3040-01-474-4782
Shouldered Shaft

014744782
0365404: RNCC: 3 | RNVC: 9
TH112033: RNCC: 5 | RNVC: 9

4 May 2000

3040-01-473-7481
Rigid Connecting Link

014737481
124-4322620 PC 18: RNCC: 3 | RNVC: 2
124-4322620 PC 18: RNCC: 5 | RNVC: 9
124-4322620: RNCC: D | RNVC: 9
4322620: RNCC: D | RNVC: 9

14 Apr 2000

3040-01-476-6992
Rigid Connecting Link

014766992
74A400927-2001: RNCC: 3 | RNVC: 2
74A400927-2001: RNCC: 5 | RNVC: 9
74A400927-2001: RNCC: C | RNVC: 1

20 Jul 2000

3040-01-475-8168
Shouldered Shaft

014758168
13492667: RNCC: 3 | RNVC: 2

14 Jun 2000

3040-01-477-6062
Linear Actuating Cylinder Piston Rod

014776062
6768004138: RNCC: 3 | RNVC: 2

14 Aug 2000

3040-01-477-6628
Shaft Collar

014776628
9364100685: RNCC: 3 | RNVC: 9
5115181050: RNCC: 5 | RNVC: 2

15 Aug 2000

3040-01-478-2149
Remote Control Lever

014782149
95001268: RNCC: 3 | RNVC: 2
216629: RNCC: 5 | RNVC: 2

31 Aug 2000

3040-01-478-2091
Linear Actuating Cylinder Piston Rod

014782091
C622375: RNCC: 3 | RNVC: 9

31 Aug 2000

3040-01-479-2341
Rigid Connecting Link

014792341
3353279: RNCC: 3 | RNVC: 2
PP4794.00.01: RNCC: 5 | RNVC: 2
3353279: RNCC: 5 | RNVC: 2
3000111: RNCC: 5 | RNVC: 9
3353279: RNCC: 5 | RNVC: 9
3353279: RNCC: 5 | RNVC: 9

16 Oct 2000

3040-01-479-4743
Housing Adapter

014794743
EP-0002702: RNCC: 3 | RNVC: 2
A37390.0100: RNCC: 5 | RNVC: 2
A373900100: RNCC: 5 | RNVC: 9

23 Oct 2000

3040-01-479-8357
Linear Actuating Cylinder Assembly

014798357
6-372-100030: RNCC: 3 | RNVC: 2

31 Oct 2000

3040-01-480-8552
Shouldered Shaft

014808552
1490044-2: RNCC: 3 | RNVC: 2
1490044-2: RNCC: 5 | RNVC: 9

7 Dec 2000

3040-01-481-6070
Housing Adapter

014816070
23511983: RNCC: 3 | RNVC: 2
DDE 23511983: RNCC: 5 | RNVC: 2

17 Jan 2001

3040-01-482-0281
Shouldered Shaft

014820281
8100-1251-0285 PT NO 43: RNCC: 3 | RNVC: 2
8100-1251-0285: RNCC: D | RNVC: 9

6 Feb 2001

3040-01-482-9081
Rigid Connecting Link

014829081
12446263: RNCC: 3 | RNVC: 2

8 Mar 2001

3040-01-483-5472
Control Cam

014835472
7377559: RNCC: 3 | RNVC: 2
D1418377: RNCC: 5 | RNVC: 2

2 Apr 2001

3040-01-484-1739
Shaft Retaining Plate

014841739
12593117: RNCC: 3 | RNVC: 2

20 Apr 2001

3040-01-485-1154
Rigid Connecting Link

014851154
805-1400056 PC 12: RNCC: 3 | RNVC: 2
805-1400056: RNCC: D | RNVC: 9

17 May 2001

3040-01-485-1191
Rigid Connecting Link

014851191
805-1400056 PC 14: RNCC: 3 | RNVC: 2
805-1400056: RNCC: D | RNVC: 9

17 May 2001

3040-01-492-9202
Linear Actuating Cylinder Piston

014929202
585-6726772-5: RNCC: 3 | RNVC: 2
211056709: RNCC: 5 | RNVC: 2
585-6726772: RNCC: D | RNVC: 9

17 Dec 2001

3040-01-487-3593
Straight Shaft

014873593
518-5004109 ITEM 33: RNCC: 3 | RNVC: 2
2014-82 ITEM 33: RNCC: 5 | RNVC: 2
2014-82: RNCC: D | RNVC: 9
5004109: RNCC: D | RNVC: 9

2 Aug 2001

3040-01-487-2274
Shaft Collar

014872274
124-7386972 PC 3: RNCC: 3 | RNVC: 2
124-7386971 PC 19: RNCC: 5 | RNVC: 2
124-7386936 PC 55: RNCC: 5 | RNVC: 2
7386936: RNCC: D | RNVC: 9
7386971: RNCC: D | RNVC: 9
7386972: RNCC: D | RNVC: 9

30 Jul 2001

3040-01-488-7451
Bell Crank Support

014887451
1276M86P02: RNCC: 3 | RNVC: 2
1276M86: RNCC: D | RNVC: 9

31 Aug 2001

3040-01-497-5199
Shouldered Shaft

014975199
154060: RNCC: 3 | RNVC: 2

22 May 2002

3040-01-497-5555
Rigid Connecting Link

014975555
B-WT76F63SH85TR: RNCC: 3 | RNVC: 2

23 May 2002

3040-01-497-9966
Rigid Connecting Link

014979966
H547-1117-89: RNCC: 3 | RNVC: 2
167-7066792-89: RNCC: 5 | RNVC: 2
167-7066792: RNCC: D | RNVC: 9

11 Jun 2002

3040-01-498-1928
Shaft Collar

014981928
SSC87: RNCC: 3 | RNVC: 2
223-7068077-51: RNCC: C | RNVC: 1
752-7068491: RNCC: D | RNVC: 9

18 Jun 2002

3040-01-498-2566
Aircra Center Shaft

014982566
3637AS805-1: RNCC: 3 | RNVC: 2
3637AS805: RNCC: D | RNVC: 9

20 Jun 2002

3040-01-498-4155
Rigid Connecting Link

014984155
167-7066792-A6: RNCC: 3 | RNVC: 2
H547-1117-A6: RNCC: 5 | RNVC: 2
7066792: RNCC: D | RNVC: 9

25 Jun 2002

3040-01-499-4206
Nonaircraft Mechanical Actuator

014994206
200105: RNCC: 3 | RNVC: 2
PL-P2M-B: RNCC: 5 | RNVC: 2

23 Jul 2002

3040-01-499-4095
Straight Shaft

014994095
736504-3: RNCC: 3 | RNVC: 2
736504-3: RNCC: 5 | RNVC: 9
736504-3: RNCC: 5 | RNVC: 9
736504-3: RNCC: 5 | RNVC: 9
736504: RNCC: D | RNVC: 9

23 Jul 2002

3040-01-500-0647
Push-Pull Control Assembly

015000647
21407239: RNCC: 3 | RNVC: 2
3851060-8: RNCC: 3 | RNVC: 9

13 Aug 2002

3040-01-500-0645
Push-Pull Control Assembly

015000645
21407237: RNCC: 3 | RNVC: 2
3851058-2: RNCC: 5 | RNVC: 9

13 Aug 2002

3040-01-500-0667
Linear Actuating Cylinder Assembly

015000667
4333: RNCC: 3 | RNVC: 2

13 Aug 2002

Load More Results