What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 123 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 123of 575

3040-01-478-3704
Shouldered Shaft

014783704
EP-0002123: RNCC: 3 | RNVC: 2
A35271.0100: RNCC: 5 | RNVC: 2
A352710100: RNCC: 5 | RNVC: 9

8 Sep 2000

3040-01-478-3634
Cable Brake

014783634
141184: RNCC: 3 | RNVC: 2
PL-C200941L001 REV F IT NO 3: RNCC: 5 | RNVC: 2
PL-C200941R001 REV F IT NO 3: RNCC: 5 | RNVC: 2
1/8D,7X19IWRC R: RNCC: C | RNVC: 1

8 Sep 2000

3040-01-478-7825
Shouldered Shaft

014787825
21340-1004-1: RNCC: 3 | RNVC: 2
21340 FIND 3: RNCC: 5 | RNVC: 2
21340: RNCC: D | RNVC: 9

27 Sep 2000

3040-01-479-5372
Linear Actuating Cylinder Assembly

014795372
791821-001: RNCC: 3 | RNVC: 2
791821: RNCC: D | RNVC: 9

24 Oct 2000

3040-01-478-8216
Spline Drive Shaft

014788216
2746674-1: RNCC: 3 | RNVC: 2

28 Sep 2000

3040-01-480-7476
Rigid Connecting Link

014807476
12474755-2: RNCC: 3 | RNVC: 2
12474755: RNCC: D | RNVC: 9

5 Dec 2000

3040-01-481-0612
Rigid Connecting Link

014810612
12298139-1: RNCC: 3 | RNVC: 2
12298139: RNCC: D | RNVC: 9

15 Dec 2000

3040-01-481-6345
Ai Shouldered Shaft

014816345
10052611: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-481-6372
Airc Straight Shaft

014816372
10052634: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-482-1286
Linear Actuating Cylinder Piston Rod

014821286
41112: RNCC: 3 | RNVC: 2
LA405-41110 ITEM 2: RNCC: 5 | RNVC: 2

9 Feb 2001

3040-01-482-4989
Rigid Connecting Link

014824989
8100-1251-0192 PC 139: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 81: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

26 Feb 2001

3040-01-483-8539
Rigid Connecting Link

014838539
3798647-1: RNCC: 3 | RNVC: 2
3798647-1: RNCC: 5 | RNVC: 9
3799948 FIND 22: RNCC: 5 | RNVC: 9
3799948: RNCC: D | RNVC: 9

10 Apr 2001

3040-01-491-1954
Manual Control Lever

014911954
12329883-2: RNCC: 3 | RNVC: 2
12329883: RNCC: D | RNVC: 9

15 Oct 2001

3040-01-491-3921
Straight Shaft

014913921
H643-7003-79: RNCC: 3 | RNVC: 2
342-7067322-79: RNCC: 5 | RNVC: 2
H643-7003: RNCC: D | RNVC: 9
7067322: RNCC: D | RNVC: 9

19 Oct 2001

3040-01-491-7691
Shouldered Shaft

014917691
61355: RNCC: 3 | RNVC: 2

31 Oct 2001

3040-01-493-4677
Straight Shaft

014934677
24241441: RNCC: 3 | RNVC: 2
24207264: RNCC: 3 | RNVC: 9

8 Jan 2002

3040-01-484-6193
Linear Actuating Cylinder Piston Rod

014846193
4083569: RNCC: 3 | RNVC: 2
923976.2098: RNCC: 5 | RNVC: 2
3820302: RNCC: 5 | RNVC: 9
3820302: RNCC: 5 | RNVC: 9
3899450: RNCC: 5 | RNVC: 9
2815PL1495915: RNCC: 6 | RNVC: 9

2 May 2001

3040-01-484-6164
Shouldered Shaft

014846164
803-6397269 PC NO 80: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 106: RNCC: 3 | RNVC: 2
803-6397269: RNCC: D | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9

2 May 2001

3040-01-485-1106
Straight Shaft

014851106
111-218-120-414-003: RNCC: 3 | RNVC: 2
D414-21-12-487 ITEM 5: RNCC: 5 | RNVC: 2
111-218-120-414: RNCC: D | RNVC: 9

17 May 2001

3040-01-484-9582
Control Cam Assembly

014849582
5750038-059: RNCC: 3 | RNVC: 2
5750038: RNCC: D | RNVC: 9

11 May 2001

3040-01-495-6854
Links

014956854
09.4697.0004: RNCC: 3 | RNVC: 9
09.4697.0004: RNCC: 5 | RNVC: 2

22 Mar 2002

3040-01-485-8086
Housing Adapter

014858086
6935069: RNCC: 3 | RNVC: 2

7 Jun 2001

3040-01-486-0510
Linear Actuating Cylinder Head

014860510
6931005 ITEM 2: RNCC: 3 | RNVC: 2
6931005-2: RNCC: C | RNVC: 1
6931005: RNCC: D | RNVC: 9

18 Jun 2001

3040-01-486-0260
Linear Actuating Cylinder Assembly

014860260
8038342: RNCC: 3 | RNVC: 2
2786462GK: RNCC: 5 | RNVC: 9
2786462: RNCC: 5 | RNVC: 9

15 Jun 2001

3040-01-485-9635
Shouldered Shaft

014859635
167-7066804-64: RNCC: 3 | RNVC: 2
H547-2002-64: RNCC: 5 | RNVC: 2
7066804: RNCC: D | RNVC: 9

13 Jun 2001

3040-01-486-4461
Linear Actuating Cylinder Piston Rod

014864461
6931004-2: RNCC: 3 | RNVC: 2
6931004: RNCC: D | RNVC: 9

28 Jun 2001

3040-01-487-0344
Mechanically Actuated Spindle

014870344
8100-1251-0284 PC 038: RNCC: 3 | RNVC: 2
8100-1251-0284: RNCC: D | RNVC: 9

23 Jul 2001

3040-01-487-8754
Shaft Retaining Plate

014878754
2195110023: RNCC: 3 | RNVC: 2
2-195-1-10018: RNCC: 5 | RNVC: 9

22 Aug 2001

3040-01-487-6133
Airc Spline Adapter

014876133
101999-54-1: RNCC: 3 | RNVC: 2
101999-3-1: RNCC: 5 | RNVC: 9

12 Aug 2001

3040-01-488-7629
Main Assy Pin

014887629
40001271: RNCC: 3 | RNVC: 2
40001221: RNCC: 5 | RNVC: 9
40337054: RNCC: 5 | RNVC: 9

4 Sep 2001

3040-01-496-2686
Housing Adapter

014962686
7998A13: RNCC: 3 | RNVC: 9

9 Apr 2002

3040-01-496-9273
Rigid Connecting Link

014969273
B-WT76F63SH81 CORNER ROD: RNCC: 3 | RNVC: 2

1 May 2002

3040-01-496-9421
Rigid Connecting Link

014969421
B-WT76F63SH82CRLS: RNCC: 3 | RNVC: 2

2 May 2002

3040-01-497-0382
Disc Brake Caliper

014970382
210739: RNCC: 3 | RNVC: 2

7 May 2002

3040-01-499-0471
Shouldered Shaft

014990471
29533537: RNCC: 3 | RNVC: 2

11 Jul 2002

3040-01-500-9519
Rigid Connecting Link

015009519
169-6985324-A6: RNCC: 3 | RNVC: 2
H545-4001-A6: RNCC: 5 | RNVC: 2
169-6985324: RNCC: D | RNVC: 9

18 Sep 2002

3040-01-500-0236
Shouldered Axle

015000236
7534872-5: RNCC: 3 | RNVC: 2
522-7534872: RNCC: D | RNVC: 9

12 Aug 2002

3040-01-501-6341
Worm Shaft

015016341
596-7409665-2: RNCC: 3 | RNVC: 2
B831-2130-2: RNCC: 5 | RNVC: 2
5967409665: RNCC: D | RNVC: 9

9 Oct 2002

3040-01-501-8661
Linear Actuating Cylinder Assembly Parts Kit

015018661
87399A 2: RNCC: 3 | RNVC: 2

18 Oct 2002

3040-01-501-8572
Linear Actuating Cylinder Assembly

015018572
8M0132609: RNCC: 3 | RNVC: 2
98703A26: RNCC: 5 | RNVC: 9
8M0108279: RNCC: 5 | RNVC: 9

18 Oct 2002

3040-01-503-1051
Bevel Gearshaft

015031051
786204: RNCC: 3 | RNVC: 2
786204: RNCC: 5 | RNVC: 2

4 Dec 2002

3040-01-503-6465
Rigid Connecting Link

015036465
6623516: RNCC: 3 | RNVC: 2
6623516: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-6472
Rigid Connecting Link

015036472
6623526: RNCC: 3 | RNVC: 2
6623526: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-7928
Linear Actuating Cylinder Piston

015037928
596-7410400-3: RNCC: 3 | RNVC: 2
B434-5500-3: RNCC: 5 | RNVC: 2
7410400: RNCC: D | RNVC: 9

8 Jan 2003

3040-01-504-7160
Manual Control Lever

015047160
LE9083: RNCC: 3 | RNVC: 2
LE9083A: RNCC: 3 | RNVC: 9

6 Feb 2003

3040-01-504-2873
Shouldered Shaft

015042873
7135922: RNCC: 3 | RNVC: 2
7135922: RNCC: 5 | RNVC: 9

24 Jan 2003

3040-01-505-6065
Straight Axle

015056065
159-0961: RNCC: 3 | RNVC: 2

11 Mar 2003

3040-01-505-0170
Rigid Connecting Link

015050170
3518-24: RNCC: 3 | RNVC: 2

19 Feb 2003

3040-01-505-6048
Straight Axle

015056048
154-5278: RNCC: 3 | RNVC: 2
CV161022D: RNCC: 5 | RNVC: 2
154-5278: RNCC: 5 | RNVC: 2

11 Mar 2003

3040-01-506-1407
Stub Wheel

015061407
22180780: RNCC: 3 | RNVC: 2

24 Mar 2003

3040-01-506-7737
Linear Actuating Cylinder Assembly

015067737
133936A1: RNCC: 3 | RNVC: 2
LTA20084: RNCC: 5 | RNVC: 2
LTA-A12-109-001 ITEM 1: RNCC: 5 | RNVC: 2

9 Apr 2003

3040-01-507-5715
Linear Actuating Cylinder Piston

015075715
596-7409215-17: RNCC: 3 | RNVC: 2
B434-2220-17: RNCC: 5 | RNVC: 2
7409215: RNCC: D | RNVC: 9

1 May 2003

3040-01-507-2783
Rigid Connecting Link

015072783
K4-2338-52: RNCC: 3 | RNVC: 2

24 Apr 2003

3040-01-510-3134
Shaft Collar

015103134
7379216 PC 25: RNCC: 3 | RNVC: 2

17 Jul 2003

3040-01-512-8220
Linear Actuating Cylinder Head

015128220
2HA960: RNCC: 3 | RNVC: 2
2HA960: RNCC: 3 | RNVC: 9
4900214-509: RNCC: 5 | RNVC: 2
900214-509: RNCC: 5 | RNVC: 9

10 Sep 2003

3040-01-513-4478
Straight Shaft

015134478
3336851: RNCC: 3 | RNVC: 2
3336851: RNCC: 3 | RNVC: 9

25 Sep 2003

3040-01-513-8651
Hub Clamp

015138651
8405204: RNCC: 3 | RNVC: 2
8405204: RNCC: 5 | RNVC: 9
8405204: RNCC: 5 | RNVC: 9

8 Oct 2003

3040-01-512-8765
Body Hub

015128765
0744682: RNCC: 3 | RNVC: 2

11 Sep 2003

3040-01-514-8799
Linear Actuating Cylinder Piston

015148799
41948: RNCC: 3 | RNVC: 2
80120-41930 ITEM 11: RNCC: 5 | RNVC: 2
80120-41930: RNCC: D | RNVC: 9

7 Nov 2003

3040-01-514-0477
Straight Shaft

015140477
3467903: RNCC: 1 | RNVC: 2
10068617: RNCC: 3 | RNVC: 2
10068617: RNCC: 5 | RNVC: 2
3467903: RNCC: 5 | RNVC: 9
3040015140477: RNCC: 6 | RNVC: 9
36638: RNCC: D | RNVC: 9

15 Oct 2003

3040-01-514-9613
Nonaircraft Mechanical Actuator

015149613
2101560-001: RNCC: 3 | RNVC: 2
2101560 ASSY 2101560-001: RNCC: 5 | RNVC: 9
2101560: RNCC: D | RNVC: 9

12 Nov 2003

3040-01-515-0379
Push-Pull Control Assembly

015150379
3333091: RNCC: 3 | RNVC: 2
3333091: RNCC: 3 | RNVC: 9

13 Nov 2003

3040-01-515-2069
Shouldered Shaft

015152069
1KK266: RNCC: 3 | RNVC: 2
1KK266: RNCC: 3 | RNVC: 9
6502840: RNCC: 5 | RNVC: 9

18 Nov 2003

3040-01-515-2308
Shouldered Shaft

015152308
8100-1251-0298 PT NO. 310: RNCC: 3 | RNVC: 2
8100-1251-0298 PC 310: RNCC: 5 | RNVC: 2

19 Nov 2003

3040-01-516-0764
Shaft Collar

015160764
6462K13: RNCC: 3 | RNVC: 2
3087AS100-39: RNCC: 5 | RNVC: 9

18 Dec 2003

3040-01-516-5268
Flexible Shaft Assembly

015165268
57353-140: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-517-0254
Shouldered Shaft

015170254
556-7106780-1: RNCC: 3 | RNVC: 2
H792-8003-1: RNCC: 5 | RNVC: 2

28 Jan 2004

3040-01-517-3676
Linear Actuating Cylinder

015173676
150060-18: RNCC: 3 | RNVC: 2

6 Feb 2004

3040-01-517-7013
Rotating Shaft Eye Bracket

015177013
7-07-267: RNCC: 3 | RNVC: 2

18 Feb 2004

3040-01-518-1989
Brake Disc

015181989
PL79221 ITEM 8: RNCC: 3 | RNVC: 9
75072: RNCC: 5 | RNVC: 2

4 Mar 2004

3040-01-518-2470
Linear Actuating Cylinder Assembly Parts Kit

015182470
R433014756: RNCC: 3 | RNVC: 2
R433014756: RNCC: 3 | RNVC: 9
P104227-K0000: RNCC: 5 | RNVC: 9

5 Mar 2004

3040-01-518-2480
Linear Actuating Cylinder Piston

015182480
C-18658 PL HP-7: RNCC: 3 | RNVC: 2

5 Mar 2004

3040-01-521-7377
Straight Shaft Assembly

015217377
N7437: RNCC: 3 | RNVC: 2
10025589: RNCC: 5 | RNVC: 2

1 Jul 2004

3040-01-521-9230
Shaft Collar

015219230
240-SC-75: RNCC: 3 | RNVC: 2
240-SC-75: RNCC: 3 | RNVC: 9
240-SC-75: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-522-1343
Shouldered Shaft

015221343
793574-7: RNCC: 3 | RNVC: 2

20 Jul 2004

3040-01-522-5872
Linear Actuating Cylinder Piston

015225872
106-0303: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 8: RNCC: 5 | RNVC: 2
506-3005: RNCC: D | RNVC: 9

4 Aug 2004

3040-01-522-9152
Control Cam

015229152
0113550-09: RNCC: 3 | RNVC: 2
0113550-11: RNCC: 5 | RNVC: 9
0113550: RNCC: D | RNVC: 9

13 Aug 2004

3040-01-522-9544
Piston Ring

015229544
PT007-005: RNCC: 3 | RNVC: 2
3-6065 ITEM 13: RNCC: 5 | RNVC: 2

14 Aug 2004

3040-01-523-3694
Rigid Connecting Link

015233694
MT57M1240-1: RNCC: 3 | RNVC: 2
3040PL0669945: RNCC: 6 | RNVC: 9
MT57M1240: RNCC: D | RNVC: 9

31 Aug 2004

3040-01-523-7754
Housing Adapter

015237754
29509994: RNCC: 3 | RNVC: 2

15 Sep 2004

3040-01-524-2173
Hydraulic Control Assembly

015242173
155G3040: RNCC: 3 | RNVC: 2
245195: RNCC: 5 | RNVC: 2
155G3041: RNCC: 5 | RNVC: 9

24 Sep 2004

3040-01-524-3942
Worm Wheel Gearshaft

015243942
6556521: RNCC: 3 | RNVC: 2
803-7391369PC14: RNCC: 5 | RNVC: 9

30 Sep 2004

3040-01-524-5860
Linear Actuating Cylinder Assembly

015245860
4KK602: RNCC: 3 | RNVC: 2
496-3296: RNCC: 5 | RNVC: 2
4KK602: RNCC: 5 | RNVC: 9
496-3296: RNCC: 5 | RNVC: 9

7 Oct 2004

3040-01-524-7582
Nonrotating Shaft Eye Bracket

015247582
12488057: RNCC: 3 | RNVC: 2

15 Oct 2004

3040-01-524-8519
Differential Spider

015248519
L090HYT: RNCC: 3 | RNVC: 2

19 Oct 2004

3040-01-525-8059
Hub Clamp

015258059
1325451: RNCC: 3 | RNVC: 2
132-5451: RNCC: 5 | RNVC: 2

24 Nov 2004

3040-01-526-4992
Flexible Shaft Assembly

015264992
65042-163FT0IN: RNCC: 3 | RNVC: 2

20 Dec 2004

3040-01-484-1421
Remote Control Lever

014841421
E8CR110-0160: RNCC: 3 | RNVC: 2
E8CR110-0160: RNCC: 5 | RNVC: 9

20 Apr 2001

3040-01-493-6171
Shouldered Shaft

014936171
46530-1: RNCC: 3 | RNVC: 2
46530-1: RNCC: 3 | RNVC: 2

11 Jan 2002

3040-01-493-5254
Shouldered Shaft

014935254
0656D0534G017A: RNCC: 3 | RNVC: 2
999F0904 FIND NO. 11: RNCC: 5 | RNVC: 9
656D0534: RNCC: 5 | RNVC: 9
999F0904: RNCC: D | RNVC: 9

9 Jan 2002

3040-01-493-6578
Control Cable Assembly

014936578
123CV10061-15: RNCC: 3 | RNVC: 2
123CV10061-15: RNCC: 3 | RNVC: 9

14 Jan 2002

3040-01-495-1247
Shaft Collar

014951247
6546C016-1: RNCC: 3 | RNVC: 2
6546C016: RNCC: D | RNVC: 9

7 Mar 2002

3040-01-485-4009
Worm Shaft

014854009
532226-2: RNCC: 3 | RNVC: 2
532226-2: RNCC: 5 | RNVC: 9
532226: RNCC: D | RNVC: 9

24 May 2001

3040-01-518-1946
Nonrotating Shaft Eye Bracket

015181946
9955.0076: RNCC: 3 | RNVC: 2

4 Mar 2004

3040-01-491-4237
Shouldered Shaft Assembly

014914237
90016-1: RNCC: 3 | RNVC: 2

22 Oct 2001

3040-01-491-5720
Flexible Shaft Assembly

014915720
22001-100 X 196IN: RNCC: 3 | RNVC: 2
22001-100 X 16FT 4IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-491-5724
Flexible Shaft Assembly

014915724
22001-100 X 277IN: RNCC: 3 | RNVC: 2
22001-100 X 23FT 1IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-491-5731
Flexible Shaft Assembly

014915731
22001-100 X 347IN: RNCC: 3 | RNVC: 2
22001-100 X 28FT 11IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-492-2756
Spline Adapter

014922756
6681/2-029-004: RNCC: 3 | RNVC: 2
KH6817PL FIND NO. 3: RNCC: 5 | RNVC: 9

20 Nov 2001

3040-01-493-3398
Worm Shaft

014933398
596-7409312-27: RNCC: 3 | RNVC: 2
B541-1013-27: RNCC: 5 | RNVC: 2
B831-2410 FN 3: RNCC: 5 | RNVC: 2
B541-1013: RNCC: D | RNVC: 9
B831-2410: RNCC: D | RNVC: 9
7409312: RNCC: D | RNVC: 9

28 Dec 2001

3040-01-457-9194
Shaft Collar

014579194
6916169: RNCC: 3 | RNVC: 2

7 Aug 1998

3040-01-459-0446
Linear Actuating Cylinder Assembly

014590446
6-372-004393: RNCC: 3 | RNVC: 2

18 Sep 1998

3040-01-459-1037
Straight Shaft

014591037
342-6726633 FIND 11: RNCC: 3 | RNVC: 2

21 Sep 1998

3040-01-460-1059
Shouldered Shaft

014601059
9841030204: RNCC: 3 | RNVC: 2
030140 R1 DL07639: RNCC: 5 | RNVC: 2
10302-04: RNCC: 5 | RNVC: 2
8719173: RNCC: D | RNVC: 9

27 Oct 1998

3040-01-460-9003
Linear Actuating Cylinder

014609003
N2217: RNCC: 3 | RNVC: 2
4000-1385 ITEM 2: RNCC: 5 | RNVC: 2
4000-1385: RNCC: D | RNVC: 9

19 Nov 1998

3040-01-461-7514
Adapter Shaft

014617514
74D425008-2033: RNCC: 3 | RNVC: 2

31 Dec 1998

3040-01-462-0630
Mechanical Drive Housing

014620630
1D86457-1: RNCC: 3 | RNVC: 2
1D86457-1: RNCC: 5 | RNVC: 9

20 Jan 1999

3040-01-468-1490
Shaft Retaining Plate

014681490
818613-1: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-468-9463
Rigid Connecting Link

014689463
4726-107: RNCC: 3 | RNVC: 2
74B463604-107: RNCC: 7 | RNVC: 2

28 Oct 1999

3040-01-468-8594
Straight Shaft

014688594
6T-0064: RNCC: 3 | RNVC: 9

25 Oct 1999

3040-01-470-5099
Linear Actuating Cylinder Assembly Parts Kit

014705099
7-373-000076: RNCC: 3 | RNVC: 2

22 Dec 1999

3040-01-471-1571
Housing Adapter

014711571
LSCP890019: RNCC: 3 | RNVC: 2

25 Jan 2000

3040-01-471-9297
Counterbalance Weight

014719297
901-015-024-109: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9674
Straight Shaft

014719674
901-040-353-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-462-9934
Pawl

014629934
741245-A: RNCC: 3 | RNVC: 2
8-25-24: RNCC: 5 | RNVC: 2

1 Mar 1999

3040-01-464-3376
Shouldered Shaft

014643376
S2419JX3: RNCC: 3 | RNVC: 2
SG4734 ITEM NO 173: RNCC: 7 | RNVC: 2
SG4734: RNCC: D | RNVC: 9

26 Apr 1999

3040-01-464-4702
Rigid Link Half

014644702
4084988: RNCC: 3 | RNVC: 2
4084990: RNCC: D | RNVC: 9
4084989: RNCC: D | RNVC: 9

30 Apr 1999

3040-01-464-2263
Rigid Connecting Link

014642263
6650395: RNCC: 3 | RNVC: 2

21 Apr 1999

3040-01-466-5201
Rigid Connecting Link

014665201
2483159: RNCC: 3 | RNVC: 2

22 Jul 1999

3040-01-467-4374
Manual Control Lever

014674374
0304020008: RNCC: 3 | RNVC: 2
0304020008: RNCC: 5 | RNVC: 9
NMP-707-25: RNCC: 5 | RNVC: 9
NMP-1068-39: RNCC: C | RNVC: 1
030.402.0008: RNCC: C | RNVC: 1
NMP-707: RNCC: D | RNVC: 9

30 Aug 1999

3040-01-472-8531
Rigid Connecting Link

014728531
563-6404331 FIND 48: RNCC: 3 | RNVC: 2
211097301: RNCC: 5 | RNVC: 2
DF6002-416: RNCC: D | RNVC: 9
563-6404331: RNCC: D | RNVC: 9

20 Mar 2000

3040-01-473-8943
Linear Actuating Cylinder Assembly

014738943
1H2H0A00112347: RNCC: 3 | RNVC: 2
AG201174C0: RNCC: 5 | RNVC: 9

19 Apr 2000

3040-01-476-1069
Shaft Collar

014761069
ZH2252: RNCC: 3 | RNVC: 2
060DH2-211 ITEM 9: RNCC: 5 | RNVC: 9
060DH2-211 ITEM 9: RNCC: 5 | RNVC: 9
ZH2252: RNCC: 5 | RNVC: 9
060DH2-211: RNCC: D | RNVC: 9

27 Jun 2000

3040-01-476-5842
Rigid Connecting Link

014765842
124-4322615 PC 59: RNCC: 3 | RNVC: 2
124-4322615: RNCC: D | RNVC: 9

17 Jul 2000

3040-01-477-0172
Shouldered Shaft

014770172
254-7015355PN19: RNCC: 3 | RNVC: 2
H749-3901 19: RNCC: 5 | RNVC: 2
7015355: RNCC: D | RNVC: 9

28 Jul 2000

3040-01-477-3256
Shaft Idler

014773256
9904105987: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-477-3379
Multiple Gears Gearshaft

014773379
9904106157: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-477-3375
Multiple Gears Gearshaft

014773375
9904106405: RNCC: 3 | RNVC: 2

7 Aug 2000

3040-01-478-9329
Shouldered Shaft

014789329
791826-001: RNCC: 3 | RNVC: 2

3 Oct 2000

3040-01-480-2735
Shaft Collar

014802735
BACF10A1: RNCC: 3 | RNVC: 2
BACF10A1: RNCC: 5 | RNVC: 2

14 Nov 2000

3040-01-480-7297
Shouldered Shaft

014807297
5714968: RNCC: 3 | RNVC: 2
24207247: RNCC: 3 | RNVC: 2
3040PL0739365: RNCC: 6 | RNVC: 9

4 Dec 2000

3040-01-480-0391
Shouldered Shaft

014800391
12421514: RNCC: 3 | RNVC: 2
12421514: RNCC: 5 | RNVC: 2
12421514: RNCC: 5 | RNVC: 2

6 Nov 2000

3040-01-481-0126
Linear Actuating Cylinder

014810126
B94259-001: RNCC: 3 | RNVC: 2
B94259-001: RNCC: 5 | RNVC: 9

14 Dec 2000

3040-01-481-9990
Bevel Gearshaft

014819990
802250: RNCC: 3 | RNVC: 9
802250: RNCC: C | RNVC: 1

2 Feb 2001

3040-01-482-3660
Bell Crank

014823660
803-6397269 ITEM 95: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 95: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

20 Feb 2001

3040-01-482-7689
Linear Actuating Cylinder Piston Rod

014827689
3253362-1: RNCC: 3 | RNVC: 2
3253362-1: RNCC: 3 | RNVC: 2
3799813 FIND 20: RNCC: 5 | RNVC: 9
3799813: RNCC: D | RNVC: 9

2 Mar 2001

3040-01-482-9933
Straight Shaft

014829933
7103271-1: RNCC: 3 | RNVC: 2
7103271: RNCC: D | RNVC: 9

13 Mar 2001

3040-01-482-9365
Rigid Connecting Link

014829365
8100-1251-0307 PC NO 78: RNCC: 3 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

9 Mar 2001

3040-01-483-3825
Shouldered Shaft

014833825
DAFD0013: RNCC: 3 | RNVC: 2

27 Mar 2001

3040-01-482-9039
Rigid Connecting Link

014829039
167-7563785 PC NO.90: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 90: RNCC: 3 | RNVC: 2
803-6397269 PC NO 64: RNCC: 5 | RNVC: 2
803-6397268 PC NO 90: RNCC: 5 | RNVC: 2
6397268: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9

8 Mar 2001

3040-01-484-0127
Shouldered Shaft

014840127
2149905: RNCC: 3 | RNVC: 2
2149905: RNCC: C | RNVC: 1

16 Apr 2001

3040-01-486-7571
Rigid Connecting Link

014867571
S14394203-207: RNCC: 3 | RNVC: 2
SI4394203-207: RNCC: C | RNVC: 1

13 Jul 2001

3040-01-488-6097
Linear Actuating Cylinder

014886097
721-7069909-35: RNCC: 3 | RNVC: 2
H861-1505-35: RNCC: 5 | RNVC: 2
H861-1505: RNCC: D | RNVC: 9
7069909: RNCC: D | RNVC: 9

29 Aug 2001

3040-01-488-7645
Rigid Connecting Link

014887645
52001578: RNCC: 3 | RNVC: 2

4 Sep 2001

3040-01-489-1807
Piston Rod Guide

014891807
7261661 PC 3: RNCC: 3 | RNVC: 2
7261661: RNCC: D | RNVC: 9

14 Sep 2001

3040-01-495-0092
Rigid Connecting Link

014950092
711599K1: RNCC: 3 | RNVC: 2

4 Mar 2002

3040-01-495-0525
Shouldered Shaft

014950525
6546D091-1: RNCC: 3 | RNVC: 2
6546D091-1: RNCC: 5 | RNVC: 2
6546D091: RNCC: D | RNVC: 9

5 Mar 2002

3040-01-495-1279
Straight Shaft

014951279
6546C024-1: RNCC: 3 | RNVC: 2
6546C024-1: RNCC: 5 | RNVC: 2
6546C024: RNCC: D | RNVC: 9

7 Mar 2002

3040-01-495-2848
Linear Actuating Cylinder Assembly

014952848
02065: RNCC: 3 | RNVC: 2

12 Mar 2002

3040-01-495-5548
Body Hub

014955548
6546C055-1: RNCC: 3 | RNVC: 2
6546E206 ITEM 8: RNCC: 5 | RNVC: 2
6546C055: RNCC: D | RNVC: 9
6546E206: RNCC: D | RNVC: 9

20 Mar 2002

3040-01-495-6210
Breather M 10X1

014956210
07.0711.0116: RNCC: 3 | RNVC: 2
116792: RNCC: 5 | RNVC: 2

21 Mar 2002

3040-01-495-9676
Worm Shaft

014959676
46-2406-1: RNCC: 3 | RNVC: 2

28 Mar 2002

3040-01-496-2231
Shouldered Shaft

014962231
581-6985420-9: RNCC: 3 | RNVC: 2
218030137: RNCC: 5 | RNVC: 2
H611-1404-9: RNCC: 5 | RNVC: 2
H611-1404: RNCC: D | RNVC: 9
6985420: RNCC: D | RNVC: 9

8 Apr 2002

3040-01-497-7881
Multiple Disk Brake

014977881
8019332-001: RNCC: 3 | RNVC: 2

5 Jun 2002

3040-01-497-8525
Straight Shaft

014978525
167-7066792-21: RNCC: 3 | RNVC: 2
H547-1117-21: RNCC: 5 | RNVC: 2
167-7066792: RNCC: D | RNVC: 9

6 Jun 2002

3040-01-498-0846
Rotating Shaft Eye Bracket

014980846
137785: RNCC: 3 | RNVC: 2

13 Jun 2002

3040-01-499-4686
Rigid Connecting Link

014994686
167-7066791-97: RNCC: 3 | RNVC: 2
H547-1112-97: RNCC: 5 | RNVC: 2
H547-1112: RNCC: D | RNVC: 9
7066791: RNCC: D | RNVC: 9

24 Jul 2002

3040-01-501-1687
Airc Clamp Set Assy

015011687
901-011-221-113: RNCC: 3 | RNVC: 2

26 Sep 2002

3040-01-502-0827
Spur Gearshaft

015020827
2075-0093: RNCC: 3 | RNVC: 2

24 Oct 2002

3040-01-503-6466
Rigid Connecting Link

015036466
6623517: RNCC: 3 | RNVC: 2
6623517: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-505-2304
Shouldered Shaft

015052304
157D3327: RNCC: 3 | RNVC: 2

27 Feb 2003

3040-01-505-3009
Shaft Collar

015053009
4544B70G01: RNCC: 3 | RNVC: 2
4D96314 ITEM 40: RNCC: 5 | RNVC: 2
4D96348 ITEM 45: RNCC: 5 | RNVC: 2
4D98023 ITEM 90: RNCC: 5 | RNVC: 2
4D96314: RNCC: D | RNVC: 9
4D96348: RNCC: D | RNVC: 9
4544B70: RNCC: D | RNVC: 9
4D98023: RNCC: D | RNVC: 9

3 Mar 2003

3040-01-506-0686
Straight Axle

015060686
125-1037: RNCC: 3 | RNVC: 2

21 Mar 2003

3040-01-507-0437
Shouldered Shaft

015070437
173423: RNCC: 3 | RNVC: 2
20728015 REV D: RNCC: 5 | RNVC: 2
20728002 REV M FN8: RNCC: 5 | RNVC: 2
20728015: RNCC: D | RNVC: 9

17 Apr 2003

3040-01-508-0469
Shaft Collar

015080469
6436K32: RNCC: 3 | RNVC: 2

12 May 2003

3040-01-510-2165
Water Filter Hsg W-Head

015102165
1025993: RNCC: 3 | RNVC: 2

15 Jul 2003

3040-01-510-3147
Shaft Collar

015103147
7379216 PC 24: RNCC: 3 | RNVC: 2

17 Jul 2003

3040-01-511-5482
Shouldered Shaft

015115482
27053MS001: RNCC: 3 | RNVC: 2
27053MS: RNCC: 5 | RNVC: 9

12 Aug 2003

3040-01-513-4604
Pivot Shaft Assembly

015134604
3409841: RNCC: 3 | RNVC: 2
3409841: RNCC: 3 | RNVC: 9

25 Sep 2003

3040-01-513-5326
Rigid Connecting Link

015135326
7250149: RNCC: 3 | RNVC: 2

29 Sep 2003

3040-01-513-5816
Control Cam

015135816
3035-560: RNCC: 3 | RNVC: 2

30 Sep 2003

3040-01-513-7432
Linear Actuating Cylinder Piston Rod

015137432
8036231: RNCC: 3 | RNVC: 2
8036231: RNCC: 5 | RNVC: 9
075VC0053: RNCC: 5 | RNVC: 9

4 Oct 2003

3040-01-514-0032
Push-Pull Control Assembly

015140032
CCX63315: RNCC: 3 | RNVC: 2
CC63315: RNCC: 5 | RNVC: 2

14 Oct 2003

3040-01-515-3035
Nonaircraft Mechanical Actuator

015153035
3E8796: RNCC: 3 | RNVC: 2

20 Nov 2003

3040-01-515-8313
Straight Shaft

015158313
52131-1027-1: RNCC: 3 | RNVC: 2
52131 FIND 14: RNCC: 5 | RNVC: 2

10 Dec 2003

3040-01-515-7916
Linear Actuating Cylinder

015157916
1622368: RNCC: 3 | RNVC: 2
CMG/131341: RNCC: 5 | RNVC: 2
131341: RNCC: 5 | RNVC: 9
13141: RNCC: 5 | RNVC: 9
CMG/13141: RNCC: 5 | RNVC: 9

9 Dec 2003

3040-01-516-9233
Lever Arm Assembly

015169233
1KK505: RNCC: 3 | RNVC: 2
1KK505: RNCC: 3 | RNVC: 9
6502933: RNCC: 5 | RNVC: 9

24 Jan 2004

3040-01-518-1995
Brake Disc

015181995
PL79221 ITEM 10: RNCC: 3 | RNVC: 9
74996: RNCC: 5 | RNVC: 2

4 Mar 2004

3040-01-518-4261
Shaft Collar

015184261
2187409: RNCC: 3 | RNVC: 2

11 Mar 2004

3040-01-519-2196
Nonaircraft Mechanical Actuator

015192196
SE 1000 AC 10100 100 PSI: RNCC: 3 | RNVC: 2
SE 1000 AC 10100: RNCC: 5 | RNVC: 1
AVMSE1000V-60: RNCC: 5 | RNVC: 9
AVMSE1000V: RNCC: 5 | RNVC: 9

9 Apr 2004

3040-01-520-7170
Control Cam

015207170
3497002000: RNCC: 3 | RNVC: 2

24 May 2004

3040-01-520-7804
Shaft Collar

015207804
GUN AS3017: RNCC: 3 | RNVC: 2

26 May 2004

3040-01-522-2104
Rigid Connecting Link

015222104
064 568: RNCC: 3 | RNVC: 2
064568: RNCC: 5 | RNVC: 9
04055436002759: RNCC: 5 | RNVC: 9

22 Jul 2004

3040-01-522-2106
Rigid Connecting Link

015222106
064 352: RNCC: 3 | RNVC: 2

22 Jul 2004

3040-01-522-2140
Detent Plate

015222140
99C621-06-DWG-03-A-0: RNCC: 3 | RNVC: 2
HI-721-6000 REV G ITEM 33: RNCC: 5 | RNVC: 1

22 Jul 2004

3040-01-522-4837
Shaft Collar

015224837
6650745: RNCC: 3 | RNVC: 2

31 Jul 2004

3040-01-522-7348
Body Hub

015227348
14 15984 1078: RNCC: 3 | RNVC: 2
14-15501-513: RNCC: 5 | RNVC: 9

10 Aug 2004

3040-01-522-9139
Rigid Connecting Link

015229139
163826: RNCC: 3 | RNVC: 2
163826: RNCC: D | RNVC: 9

13 Aug 2004

3040-01-523-3293
Mechanical Drive Housing Part

015233293
301044-1: RNCC: 3 | RNVC: 2
301044-1: RNCC: 3 | RNVC: 9
SE221N SHT2, 308006 FN-4: RNCC: 5 | RNVC: 9
SE221N SHT2, 308006 FN-4: RNCC: C | RNVC: 1

30 Aug 2004

3040-01-523-6302
Shouldered Shaft

015236302
656C0289J039A: RNCC: 3 | RNVC: 1
993R0049PC14: RNCC: 5 | RNVC: 1

10 Sep 2004

3040-01-524-4230
Flexible Drive Shaft

015244230
HM025-221-3: RNCC: 3 | RNVC: 2

1 Oct 2004

3040-01-525-3149
Bevel Gearshaft

015253149
533113-1: RNCC: 3 | RNVC: 2
533113-1: RNCC: 5 | RNVC: 9
533113: RNCC: D | RNVC: 9

3 Nov 2004

3040-01-525-5077
Rigid Connecting Link

015255077
3317122: RNCC: 3 | RNVC: 2
3317122: RNCC: 3 | RNVC: 9

12 Nov 2004

3040-01-525-5185
Pneumatic Actuator Cylinder Housing

015255185
106274: RNCC: 3 | RNVC: 2

13 Nov 2004

3040-01-525-5199
Linear Actuating Cylinder Head

015255199
112337: RNCC: 3 | RNVC: 2

13 Nov 2004

3040-01-525-5205
Shouldered Shaft

015255205
111226: RNCC: 3 | RNVC: 2

15 Nov 2004

3040-01-525-9843
Straight Shaft

015259843
SH-5.0-72-04-Q-0: RNCC: 3 | RNVC: 2
5.0-72-KQQ-3-Q ITEM 3: RNCC: 5 | RNVC: 2
5.0-72-KQQ-3-Q: RNCC: D | RNVC: 9

2 Dec 2004

3040-01-526-4325
Nonrotating Shaft Eye Bracket

015264325
65066-00: RNCC: 3 | RNVC: 2
P-2380 FN 6: RNCC: 5 | RNVC: 2

16 Dec 2004

3040-01-526-0111
Shouldered Shaft

015260111
210-3328: RNCC: 3 | RNVC: 2

3 Dec 2004

3040-01-497-5122
Rotating Shaft Eye Bracket

014975122
154071: RNCC: 3 | RNVC: 2

22 May 2002

3040-01-497-0545
Push-Pull Control Assembly

014970545
CCX63326: RNCC: 3 | RNVC: 2
32377-003-26FT: RNCC: 3 | RNVC: 9
032377-003-312: RNCC: 5 | RNVC: 9
32377-003-03120: RNCC: 5 | RNVC: 9
32377-003-26FT: RNCC: 5 | RNVC: 9
32377-003-312: RNCC: 5 | RNVC: 9
32377-003-03120: RNCC: 5 | RNVC: 9
32377-003-312: RNCC: 5 | RNVC: 9
032377-003-312: RNCC: 5 | RNVC: 9

8 May 2002

3040-01-497-9980
Ball Joint

014979980
216598: RNCC: 3 | RNVC: 2

11 Jun 2002

3040-01-499-2495
Rigid Connecting Link

014992495
803-5184146 PC 13 PG 3 ZONE 18-D: RNCC: 3 | RNVC: 2
803-5184144 PC 51 PG 2 ZONE 14-C: RNCC: 5 | RNVC: 2
5184146: RNCC: D | RNVC: 9
5184144: RNCC: D | RNVC: 9

17 Jul 2002

3040-01-501-0364
Rigid Connecting Link

015010364
566-7067173-73: RNCC: 3 | RNVC: 2
H625-0312-73: RNCC: 5 | RNVC: 2
566-7067173: RNCC: D | RNVC: 9

20 Sep 2002

3040-01-501-7447
Rigid Connecting Link

015017447
43433: RNCC: 3 | RNVC: 2

15 Oct 2002

3040-01-501-8350
Body Hub

015018350
55074T: RNCC: 3 | RNVC: 2

17 Oct 2002

3040-01-501-9133
Shaft Collar

015019133
805-1624130 PC 8: RNCC: 3 | RNVC: 2
805-1624121 PC 76: RNCC: 5 | RNVC: 9
805-1624121: RNCC: D | RNVC: 9
805-1624130: RNCC: D | RNVC: 9

21 Oct 2002

3040-01-502-3263
Shaft Collar

015023263
50 X 80 RFN 7012: RNCC: 3 | RNVC: 2
SC3040-0008-1: RNCC: 7 | RNVC: 9

1 Nov 2002

3040-01-503-2319
Shouldered Shaft

015032319
1319447: RNCC: 3 | RNVC: 2
734309379: RNCC: 5 | RNVC: 9
1319447: RNCC: 5 | RNVC: 9

9 Dec 2002

3040-01-501-3424
Shouldered Shaft

015013424
585-6726941-46: RNCC: 3 | RNVC: 2
15089093: RNCC: 5 | RNVC: 2
6726941: RNCC: D | RNVC: 9

1 Oct 2002

3040-01-503-7395
Counterbalance Weight

015037395
5126T81P04: RNCC: 3 | RNVC: 2
5126T81P04: RNCC: 5 | RNVC: 9

7 Jan 2003

3040-01-501-6945
Rigid Connecting Link

015016945
805-1626510 PC 12: RNCC: 3 | RNVC: 2
1626510: RNCC: D | RNVC: 9

10 Oct 2002

3040-01-504-3480
Rigid Connecting Link

015043480
7138785: RNCC: 3 | RNVC: 2
7138785: RNCC: 5 | RNVC: 9

27 Jan 2003

3040-01-504-9110
Spur Gearshaft

015049110
596-7409253-10: RNCC: 3 | RNVC: 2
596-7410365-31: RNCC: 5 | RNVC: 2
B434-8205-31: RNCC: 5 | RNVC: 2
B434-8212-10: RNCC: 5 | RNVC: 2
7410365: RNCC: D | RNVC: 9
7409253: RNCC: D | RNVC: 9

13 Feb 2003

3040-01-504-8488
Rigid Connecting Link

015048488
69-9605-5: RNCC: 3 | RNVC: 2

12 Feb 2003

3040-01-505-8143
Rigid Connecting Link

015058143
Q7924-04- R4 REF 10: RNCC: 3 | RNVC: 2
Q7924-05-R4 REF 10: RNCC: 3 | RNVC: 2
IM-LPD-004: RNCC: 5 | RNVC: 2

17 Mar 2003

3040-01-506-5540
Linear Actuating Cylinder Assembly

015065540
863-000204: RNCC: 3 | RNVC: 2
0.75DSRM1.00: RNCC: 5 | RNVC: 9

2 Apr 2003

3040-01-506-3413
Mechanically Actuated Spindle

015063413
12064-44: RNCC: 3 | RNVC: 2
12344 ITEM 2: RNCC: 5 | RNVC: 2
A-801-12064-44: RNCC: 5 | RNVC: 2

27 Mar 2003

3040-01-505-9352
Rigid Connecting Link

015059352
12422797: RNCC: 3 | RNVC: 2
12422797: RNCC: 5 | RNVC: 2
12422797: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-507-3078
Rigid Connecting Link

015073078
LSCP580188: RNCC: 3 | RNVC: 2

24 Apr 2003

3040-01-507-0608
Inertia Damper

015070608
22KP193: RNCC: 1 | RNVC: 2
167-8121: RNCC: 3 | RNVC: 2
167-8121: RNCC: 5 | RNVC: 2
7C8444: RNCC: 5 | RNVC: 9
7C8444: RNCC: 5 | RNVC: 9
222-5782: RNCC: D | RNVC: 9

17 Apr 2003

3040-01-507-0796
Mechanical Drive Housing

015070796
3920519: RNCC: 3 | RNVC: 2
3936256: RNCC: 3 | RNVC: 2

18 Apr 2003

3040-01-509-1219
Helical Gear And Shaft Assembly

015091219
3896047: RNCC: 3 | RNVC: 2
3054619: RNCC: 5 | RNVC: 9
3054619: RNCC: 5 | RNVC: 9
3896047: RNCC: 5 | RNVC: 9

12 Jun 2003

3040-01-511-5512
Linear Actuating Cylinder Assembly

015115512
2717095: RNCC: 3 | RNVC: 2
6623849: RNCC: 3 | RNVC: 2
6623849: RNCC: 5 | RNVC: 9

12 Aug 2003

3040-01-512-4264
Shouldered Shaft Assembly

015124264
CE-202-10181: RNCC: 3 | RNVC: 9
202-10181: RNCC: 5 | RNVC: 9

29 Aug 2003

3040-01-512-4560
Shouldered Shaft

015124560
DAF3521D408-001: RNCC: 3 | RNVC: 2
DAF3521D408-001: RNCC: 5 | RNVC: 9
DAF3521D408: RNCC: D | RNVC: 9

2 Sep 2003

3040-01-512-4854
Shouldered Shaft Assembly

015124854
D35-007-1210: RNCC: 3 | RNVC: 2
D35XGTTTTTCG REF NO 61: RNCC: 5 | RNVC: 2

2 Sep 2003

3040-01-512-7428
Friction Lining

015127428
A107536-101-11 ITEM 8: RNCC: 3 | RNVC: 2
A107753-101-11: RNCC: 3 | RNVC: 9
A107536-101-11 ITEM 8: RNCC: 5 | RNVC: 9
A107536-102-11 ITEM 8: RNCC: 5 | RNVC: 9
A107753-101-11: RNCC: C | RNVC: 1
A107536-102-11 ITEM 8: RNCC: C | RNVC: 1

9 Sep 2003

3040-01-512-9157
Body Hub

015129157
0744688: RNCC: 3 | RNVC: 2
TM S6226-R7-MMC-010 FIG 7-3-1: RNCC: 5 | RNVC: 9

12 Sep 2003

3040-01-512-9198
Rigid Connecting Link

015129198
3930AS523: RNCC: 3 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
3930AS523: RNCC: 5 | RNVC: 2
74A733110-2005: RNCC: 5 | RNVC: 9

12 Sep 2003

3040-01-513-0810
Spur Gearshaft

015130810
PX-10732: RNCC: 3 | RNVC: 2

17 Sep 2003

3040-01-513-4845
Brake Shoe

015134845
527766-80: RNCC: 3 | RNVC: 2
527766-80: RNCC: 5 | RNVC: 2

26 Sep 2003

3040-01-513-8090
Shouldered Shaft

015138090
7027211: RNCC: 3 | RNVC: 2
0730 309 430: RNCC: 5 | RNVC: 2
0734 309 430: RNCC: 5 | RNVC: 9
8036754: RNCC: 5 | RNVC: 9
0734 309 278: RNCC: 5 | RNVC: 9
8036754: RNCC: 5 | RNVC: 9

7 Oct 2003

3040-01-513-9031
Push-Pull Control Assembly

015139031
83001-402: RNCC: 3 | RNVC: 2

9 Oct 2003

3040-01-514-8411
Shouldered Shaft

015148411
42112: RNCC: 3 | RNVC: 2
12M23-42110 ITEM 2: RNCC: 5 | RNVC: 2
12M23-42110: RNCC: D | RNVC: 9

6 Nov 2003

3040-01-515-6460
Straight Shaft

015156460
018963: RNCC: 3 | RNVC: 2

3 Dec 2003

3040-01-516-5331
Pawl

015165331
709-5486674 ITEM 52: RNCC: 3 | RNVC: 2
5486674 ITEM 52: RNCC: 5 | RNVC: 2
5486674: RNCC: D | RNVC: 9

9 Jan 2004

3040-01-516-5269
Flexible Shaft Assembly

015165269
57353-138: RNCC: 3 | RNVC: 2

9 Jan 2004

3040-01-516-5764
Linear Actuating Cylinder Assembly

015165764
20729485 REV C: RNCC: 3 | RNVC: 2
174010: RNCC: 5 | RNVC: 2

12 Jan 2004

3040-01-517-3679
Linear Actuating Cylinder Cap

015173679
150060-19: RNCC: 3 | RNVC: 2

6 Feb 2004

3040-01-517-5781
Linear Actuating Cylinder Piston

015175781
89U089264BB0400: RNCC: 3 | RNVC: 2
80-4170: RNCC: 5 | RNVC: 2
EAA-8350-90 PSI: RNCC: 5 | RNVC: 9
EAA-8350-U-90: RNCC: 5 | RNVC: 9

12 Feb 2004

3040-01-518-8555
P4 Spindle

015188555
29530504: RNCC: 3 | RNVC: 2
16KP807: RNCC: 5 | RNVC: 2
16KP807: RNCC: 5 | RNVC: 9

25 Mar 2004

3040-01-519-5144
Linear Actuating Cylinder Assembly

015195144
2HA958: RNCC: 3 | RNVC: 2
2HA958: RNCC: 3 | RNVC: 9
4900214-005: RNCC: 5 | RNVC: 2

22 Apr 2004

3040-01-520-8771
Manual Control Lever

015208771
305-2087: RNCC: 3 | RNVC: 9
4KK515: RNCC: 5 | RNVC: 2
496-3261: RNCC: 5 | RNVC: 2
305-2087: RNCC: 5 | RNVC: 2
496-3261: RNCC: 5 | RNVC: 9
4KK515: RNCC: 5 | RNVC: 9

1 Jun 2004

3040-01-520-8805
Linear Actuating Cylinder Piston

015208805
356-4967: RNCC: 3 | RNVC: 9
4KK539: RNCC: 5 | RNVC: 2
356-4967: RNCC: 5 | RNVC: 2
4KK539: RNCC: 5 | RNVC: 9

1 Jun 2004

3040-01-521-1628
Mechanical Drive Housing

015211628
880686A51: RNCC: 3 | RNVC: 2
1600-880686A51: RNCC: 5 | RNVC: 9
1623-859399T15: RNCC: 5 | RNVC: 9

12 Jun 2004

3040-01-522-1668
Nonaircraft Mechanical Actuator

015221668
15881602-1: RNCC: 3 | RNVC: 2
15881602-1: RNCC: 3 | RNVC: 9
1588 ITEM 9: RNCC: 5 | RNVC: 9
1588 ITEM 9: RNCC: C | RNVC: 1

21 Jul 2004

3040-01-522-2113
Linear Actuating Cylinder Assembly

015222113
064 346: RNCC: 3 | RNVC: 2

22 Jul 2004

3040-01-520-9165
Flexible Shaft Assembly

015209165
596-7410500-34: RNCC: 3 | RNVC: 2
218040624: RNCC: 5 | RNVC: 2
B4345111-34: RNCC: 5 | RNVC: 9

2 Jun 2004

3040-01-522-9138
Rigid Connecting Link

015229138
163825: RNCC: 3 | RNVC: 2
163825: RNCC: D | RNVC: 9

13 Aug 2004

3040-01-523-0954
Shouldered Shaft Assembly

015230954
7377912: RNCC: 3 | RNVC: 2
7377912: RNCC: 5 | RNVC: 9

20 Aug 2004

3040-01-523-7215
Sun Gear

015237215
13977: RNCC: 3 | RNVC: 2
4100666: RNCC: 5 | RNVC: 2
4100666: RNCC: 5 | RNVC: 9

14 Sep 2004

3040-01-525-1028
Straight Shaft

015251028
05079301: RNCC: 3 | RNVC: 2

28 Oct 2004

3040-01-526-4297
Push-Pull Control Assembly Parts Kit

015264297
65205-00: RNCC: 3 | RNVC: 2
P-2380 FN 7: RNCC: 5 | RNVC: 2

16 Dec 2004

3040-01-526-4988
Flexible Shaft Assembly

015264988
65042-134FT0IN: RNCC: 3 | RNVC: 2

20 Dec 2004

3040-01-495-2850
Linear Actuating Cylinder Assembly

014952850
02055: RNCC: 3 | RNVC: 2

12 Mar 2002

3040-01-457-7085
Rigid Connecting Link

014577085
12465875: RNCC: 3 | RNVC: 2

31 Jul 1998

3040-01-458-7074
Pawl

014587074
26534-1: RNCC: 3 | RNVC: 2
26534-4: RNCC: 5 | RNVC: 9
26534: RNCC: D | RNVC: 9

4 Sep 1998

3040-01-459-3175
Shouldered Shaft

014593175
8100-1251-0192 PC 66: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

26 Sep 1998

3040-01-459-5223
Worm Shaft

014595223
167-6404330 FIND 98: RNCC: 3 | RNVC: 2
167-6404330: RNCC: 5 | RNVC: 9

5 Oct 1998

3040-01-459-7123
Shouldered Shaft

014597123
8100-1251-0192 PC 119: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

13 Oct 1998

3040-01-460-2513
Manual Control Lever Assembly

014602513
8451827: RNCC: 3 | RNVC: 9

30 Oct 1998

3040-01-460-0506
Alteration Housing

014600506
22194: RNCC: 3 | RNVC: 2

23 Oct 1998

3040-01-461-3232
Piston Ring

014613232
82117: RNCC: 3 | RNVC: 9
82117: RNCC: 5 | RNVC: 9

9 Dec 1998

3040-01-461-4749
Rigid Connecting Link

014614749
3Q779D-1: RNCC: 3 | RNVC: 2

15 Dec 1998

3040-01-459-9431
Shouldered Shaft

014599431
6-810-001610: RNCC: 3 | RNVC: 9
6-810-001610: RNCC: 5 | RNVC: 2

20 Oct 1998

3040-01-462-5032
Pivot Shaft Assembly

014625032
3121863: RNCC: 3 | RNVC: 2
3121863: RNCC: 5 | RNVC: 9

5 Feb 1999

3040-01-469-3480
Straight Shaft

014693480
759477: RNCC: 3 | RNVC: 2

15 Nov 1999

3040-01-470-8717
Rigid Connecting Link

014708717
74A425127-1001: RNCC: 3 | RNVC: 2
74A425127-1001: RNCC: 5 | RNVC: 9

13 Jan 2000

3040-01-471-9295
Counterbalance Weight

014719295
901-015-024-105: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9915
Rigid Connecting Link

014719915
901-031-635-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-471-9917
Rigid Connecting Link

014719917
901-031-635-105: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-1771
Shouldered Shaft

014721771
7-317237336-1: RNCC: 3 | RNVC: 2
7-317237336: RNCC: D | RNVC: 9

18 Feb 2000

3040-01-462-9926
Counterbalance Weight

014629926
741159-A: RNCC: 3 | RNVC: 2
8-39-7: RNCC: 5 | RNVC: 2

1 Mar 1999

3040-01-462-9707
Manual Control Lever Assembly

014629707
707907-K2: RNCC: 3 | RNVC: 2
8-7-11: RNCC: 5 | RNVC: 2
707907K02: RNCC: 5 | RNVC: 2

26 Feb 1999

3040-01-463-4253
Rigid Connecting Link

014634253
803-6397269 PC53 ZINC PLATED: RNCC: 3 | RNVC: 2
167-6926161 PC184 ZINC PLATED: RNCC: 5 | RNVC: 2
8100-1251-0307 PC NO 79: RNCC: C | RNVC: 1
6397269: RNCC: D | RNVC: 9

19 Mar 1999

3040-01-463-5587
Interl Piston Cover

014635587
768747: RNCC: 3 | RNVC: 2

26 Mar 1999

3040-01-463-5334
Shouldered Shaft

014635334
167-6926191 PC146: RNCC: 3 | RNVC: 2
LH5167617 PC146: RNCC: D | RNVC: 9
6926191: RNCC: D | RNVC: 9

25 Mar 1999

3040-01-464-0940
Master Rebuild Kit

014640940
90-015-3021: RNCC: 3 | RNVC: 2

15 Apr 1999

3040-01-464-9018
Shouldered Shaft

014649018
765340: RNCC: 3 | RNVC: 2

13 May 1999

3040-01-465-1743
Manual Control Lever

014651743
530257: RNCC: 3 | RNVC: 2
530257: RNCC: 5 | RNVC: 9
530257: RNCC: 5 | RNVC: 9

25 May 1999

3040-01-465-1215
Straight Shaft

014651215
6409001: RNCC: 3 | RNVC: 2
528-6409001 53: RNCC: 5 | RNVC: 2
528-6409001 FIN: RNCC: C | RNVC: 1

21 May 1999

3040-01-464-4685
Shouldered Shaft

014644685
53758: RNCC: 3 | RNVC: 2
721-30-B5-G2 OUTPUT SHAFT ASSY: RNCC: 5 | RNVC: 9

30 Apr 1999

3040-01-466-3566
Shouldered Shaft Assembly

014663566
909860-1: RNCC: 3 | RNVC: 2
9168387: RNCC: 7 | RNVC: 9
9168387: RNCC: C | RNVC: 1

15 Jul 1999

3040-01-474-2091
Shouldered Shaft

014742091
118-5837: RNCC: 3 | RNVC: 2

27 Apr 2000

3040-01-474-6404
Linear Actuating Cylinder Assembly

014746404
AG201170E: RNCC: 3 | RNVC: 2
AG201170E0: RNCC: 5 | RNVC: 9

9 May 2000

3040-01-475-2284
Multiple Gears Gearshaft

014752284
2028764: RNCC: 3 | RNVC: 9
AT154653: RNCC: 5 | RNVC: 9

25 May 2000

3040-01-467-6792
Linear Actuating Cylinder Assembly

014676792
DHV272B2/2B-1.50-3.000-0063/006-: RNCC: 3 | RNVC: 1
1H000044068: RNCC: 5 | RNVC: 9
DH72B2B-150-300-63-S11-0: RNCC: 5 | RNVC: 9

10 Sep 1999

3040-01-467-8010
Linear Actuating Cylinder Assembly

014678010
1H2H0A00276170: RNCC: 3 | RNVC: 2
AG201174A0: RNCC: 5 | RNVC: 9

15 Sep 1999

3040-01-475-8412
Shouldered Shaft

014758412
13834N18: RNCC: 3 | RNVC: 9
13834N18C: RNCC: 5 | RNVC: 2
13795N18-10: RNCC: 5 | RNVC: 9
PL-13796N18ITEM10: RNCC: 5 | RNVC: 9
13795N18-10: RNCC: C | RNVC: 1
13834N18: RNCC: C | RNVC: 1
PL-13796N18ITEM10: RNCC: C | RNVC: 1

14 Jun 2000

3040-01-475-6680
Rigid Connecting Link

014756680
124-5563773 PC 7: RNCC: 3 | RNVC: 2
124-5563772 PC 38: RNCC: 5 | RNVC: 9
5563772: RNCC: D | RNVC: 9
5563773: RNCC: D | RNVC: 9

8 Jun 2000

3040-01-476-6993
Rigid Connecting Link

014766993
74A400923-2001: RNCC: 3 | RNVC: 2
74A400923-2001: RNCC: 5 | RNVC: 9
74A400923-2001: RNCC: C | RNVC: 1

20 Jul 2000

3040-01-476-9922
Bell Crank

014769922
254-7015355PN3: RNCC: 3 | RNVC: 2
H749-3901 3: RNCC: 5 | RNVC: 2
7015355: RNCC: D | RNVC: 9

27 Jul 2000

3040-01-477-6667
Linear Actuating Cylinder Piston Rod

014776667
6768004117: RNCC: 3 | RNVC: 2

15 Aug 2000

3040-01-478-0376
Ball Joint

014780376
218127: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-478-0605
Mechanical Drive Housing

014780605
134760: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-478-2004
Airc Straight Shaft

014782004
769424: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-2001
Airc Spur Gearshaft

014782001
769008: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-6945
Transmission Fluid Cooler

014786945
002617: RNCC: 3 | RNVC: 2
582030-001: RNCC: 5 | RNVC: 2
3040PL0651268: RNCC: 6 | RNVC: 9

22 Sep 2000

3040-01-480-8755
Nonrotating Shaft Eye Bracket

014808755
7HB494: RNCC: 3 | RNVC: 2
53105: RNCC: 3 | RNVC: 2
7HB494: RNCC: 3 | RNVC: 9
53105: RNCC: 5 | RNVC: 9

8 Dec 2000

3040-01-481-2903
Ai Shouldered Shaft

014812903
41010066-102: RNCC: 3 | RNVC: 2

28 Dec 2000

3040-01-481-6389
Rigid Connecting Link

014816389
10052647: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-482-6032
Controllable Swashplate

014826032
2501010: RNCC: 3 | RNVC: 2
2501010: RNCC: 5 | RNVC: 9

28 Feb 2001

3040-01-483-1154
Straight Shaft

014831154
556-7015844-13: RNCC: 3 | RNVC: 2
36-01-7806: RNCC: 5 | RNVC: 2
7015844: RNCC: D | RNVC: 9

16 Mar 2001

3040-01-483-2637
Rigid Connecting Link

014832637
8100 1251 0308 PC 321: RNCC: 3 | RNVC: 2
8100 1251 0307 PC 309: RNCC: 5 | RNVC: 2
8100 1251 0307: RNCC: D | RNVC: 9
8100 1251 0308: RNCC: D | RNVC: 9

22 Mar 2001

3040-01-484-5891
Rigid Connecting Link

014845891
923899.0492: RNCC: 3 | RNVC: 2
923899.0492: RNCC: 5 | RNVC: 2
9238990492: RNCC: 5 | RNVC: 9

2 May 2001

3040-01-488-7636
Straight Shaft

014887636
40001273: RNCC: 3 | RNVC: 2

4 Sep 2001

3040-01-488-9707
Linear Actuating Cylinder Piston

014889707
373 3042 501: RNCC: 3 | RNVC: 2

7 Sep 2001

3040-01-488-9290
Carriage Cylinder

014889290
50001197: RNCC: 3 | RNVC: 2

6 Sep 2001

3040-01-489-1098
Shouldered Shaft

014891098
7261661 PC 4: RNCC: 3 | RNVC: 2
7261661: RNCC: D | RNVC: 9

12 Sep 2001

3040-01-507-1410
Linear Actuating Cylinder

015071410
B1-01C10M: RNCC: 3 | RNVC: 2

21 Apr 2003

3040-01-469-1163
Shouldered Shaft

014691163
12462887: RNCC: 3 | RNVC: 2
12462887: RNCC: 5 | RNVC: 2

3 Nov 1999

3040-01-472-7637
Shaft Collar

014727637
HM022-051: RNCC: 3 | RNVC: 2

15 Mar 2000

3040-01-466-4154
Spur Gearshaft

014664154
33020: RNCC: 3 | RNVC: 2
32115: RNCC: 5 | RNVC: 9

19 Jul 1999

3040-01-466-8797
Rigid Connecting Link

014668797
4086412: RNCC: 3 | RNVC: 2
3040PL0669936: RNCC: 6 | RNVC: 9

5 Aug 1999

3040-01-475-5244
Guide Tube

014755244
2784726-1: RNCC: 3 | RNVC: 2
2784726: RNCC: D | RNVC: 9

6 Jun 2000

3040-01-491-3934
Linear Actuating Cylinder Piston Rod

014913934
374 030 0001: RNCC: 3 | RNVC: 2
374 030 0001: RNCC: 5 | RNVC: 9
B128158-1: RNCC: 5 | RNVC: 9

19 Oct 2001

3040-01-491-5730
Flexible Shaft Assembly

014915730
22001-100 X 450IN: RNCC: 3 | RNVC: 2
22001-100 X 37FT 6IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-493-4220
Spur Gearshaft

014934220
596-7409770-25: RNCC: 3 | RNVC: 2
B831-9231-25: RNCC: 5 | RNVC: 2
B831-9231: RNCC: D | RNVC: 9
7409770: RNCC: D | RNVC: 9

7 Jan 2002

3040-01-493-7596
Shouldered Shaft Assembly

014937596
S23-12475-0: RNCC: 3 | RNVC: 2
S23-12475-0K: RNCC: 5 | RNVC: 9
S23-12475: RNCC: 5 | RNVC: 9

16 Jan 2002

3040-01-490-9759
Input Sp Shaft Assy

014909759
532274-4: RNCC: 3 | RNVC: 2
532274-4: RNCC: 5 | RNVC: 2

9 Oct 2001

3040-01-491-5729
Flexible Shaft Assembly

014915729
22001-100 X 406IN: RNCC: 3 | RNVC: 2
22001-100 X 33FT 10IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001: RNCC: D | RNVC: 9

25 Oct 2001

3040-01-491-6494
Flexible Shaft Assembly

014916494
22001-100 X 261 IN: RNCC: 3 | RNVC: 2
22001-100 X 21FT 9IN: RNCC: 5 | RNVC: 2
B-409-22001-100: RNCC: 5 | RNVC: 9
22001-100 X 261: RNCC: C | RNVC: 1
22001: RNCC: D | RNVC: 9

26 Oct 2001

3040-01-489-0914
Hydraulic Accumulator Cylinder

014890914
7261661-2: RNCC: 3 | RNVC: 2
7261661: RNCC: D | RNVC: 9

11 Sep 2001

3040-01-491-8001
Linear Actuating Cylinder

014918001
86400421: RNCC: 3 | RNVC: 2
86400421: RNCC: 5 | RNVC: 1
86400421: RNCC: 5 | RNVC: 2

1 Nov 2001

3040-01-521-1838
Bell Crank

015211838
709F4114: RNCC: 3 | RNVC: 2

14 Jun 2004

3040-01-521-9276
Helical Gear And Shaft Assembly

015219276
106-0317: RNCC: 3 | RNVC: 2
506-3005 PC. NO. 40: RNCC: 5 | RNVC: 2

12 Jul 2004

3040-01-524-2233
Rigid Connecting Link

015242233
12423358-001: RNCC: 3 | RNVC: 2
12423358-001: RNCC: 5 | RNVC: 2
12423358: RNCC: D | RNVC: 9

24 Sep 2004

3040-01-457-5885
Bellcrank

014575885
A3168012-1: RNCC: 3 | RNVC: 2

28 Jul 1998

3040-01-459-3789
Rod Seal Parts Kit

014593789
051-KR011-00100: RNCC: 3 | RNVC: 9

29 Sep 1998

3040-01-459-6628
Shouldered Shaft

014596628
8100-1253-0238 PC 552: RNCC: 3 | RNVC: 2
8100-1253-0238: RNCC: D | RNVC: 9

9 Oct 1998

3040-01-460-1122
Straight Shaft

014601122
167-6404602 FIND 58: RNCC: 3 | RNVC: 2
6404602: RNCC: D | RNVC: 9

27 Oct 1998

3040-01-459-7916
Rigid Connecting Link

014597916
74A400536-1002: RNCC: 3 | RNVC: 2

15 Oct 1998

3040-01-468-9601
Linear Actuating Cylinder

014689601
45M-707: RNCC: 3 | RNVC: 2
EA1000 ITEM 54: RNCC: 5 | RNVC: 2
EA1000: RNCC: D | RNVC: 9

28 Oct 1999

3040-01-469-0596
Nonaircraft Mechanical Actuator

014690596
G672116-1: RNCC: 3 | RNVC: 2
G672116-1: RNCC: 5 | RNVC: 2
G672116-1: RNCC: 5 | RNVC: 2
G672116: RNCC: D | RNVC: 9

2 Nov 1999

3040-01-470-2925
Rotating Shaft Eye Bracket

014702925
124-4322609 PC 4: RNCC: 3 | RNVC: 2
124-4322609: RNCC: D | RNVC: 9

14 Dec 1999

3040-01-471-1565
Bell Crank Support

014711565
7-211660025-5: RNCC: 3 | RNVC: 2
7-211660025-5: RNCC: 5 | RNVC: 9

25 Jan 2000

3040-01-471-9127
Shaft Idler

014719127
901-011-351-103: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-472-0947
Seal Adapter Assy

014720947
901-045-255-101: RNCC: 3 | RNVC: 2

17 Feb 2000

3040-01-463-2059
Straight Shaft

014632059
3Q1107D-2: RNCC: 3 | RNVC: 2

11 Mar 1999

3040-01-463-5318
Rigid Connecting Link

014635318
1500AS106-1: RNCC: 3 | RNVC: 2

25 Mar 1999

3040-01-466-7557
Shaft Idler

014667557
3-417-204-448-42: RNCC: 3 | RNVC: 2

30 Jul 1999

3040-01-467-6920
Linear Actuating Cylinder Assembly Parts Kit

014676920
051-KR075-63: RNCC: 3 | RNVC: 9
171-KB001-00150: RNCC: C | RNVC: 1

10 Sep 1999

3040-01-467-7721
Linear Actuating Cylinder Assembly

014677721
1H2H0A00081311: RNCC: 3 | RNVC: 2
AG201170B0: RNCC: 5 | RNVC: 9

14 Sep 1999

3040-01-472-7550
Straight Shaft

014727550
12370859: RNCC: 3 | RNVC: 2

15 Mar 2000

3040-01-474-8132
Rigid Connecting Link

014748132
8066447: RNCC: 3 | RNVC: 9
8066447: RNCC: 5 | RNVC: 2
AT154835: RNCC: 5 | RNVC: 9

12 May 2000

3040-01-475-3042
Mechanical Drive Housing

014753042
12462846: RNCC: 3 | RNVC: 2

31 May 2000

3040-01-475-9976
Straight Shaft

014759976
5444-181: RNCC: 3 | RNVC: 2
5444-166 ITEM 3: RNCC: 5 | RNVC: 2
5444-166: RNCC: D | RNVC: 9

21 Jun 2000

3040-01-476-6197
Indicator Arm

014766197
20056-2: RNCC: 3 | RNVC: 2
A-810-20056-2: RNCC: 5 | RNVC: 9
20056: RNCC: D | RNVC: 9

18 Jul 2000

3040-01-476-8401
Linear Actuating Cylinder Assembly

014768401
6372003151: RNCC: 3 | RNVC: 2

25 Jul 2000

3040-01-477-4794
Linear Actuating Cylinder Piston Rod

014774794
6768002196: RNCC: 3 | RNVC: 2

10 Aug 2000

3040-01-477-9243
Housing Adapter

014779243
38-C2550: RNCC: 3 | RNVC: 2

23 Aug 2000

3040-01-478-1051
Shouldered Shaft

014781051
131413: RNCC: 3 | RNVC: 2

30 Aug 2000

3040-01-478-1204
Straight Shaft

014781204
2-33401: RNCC: 3 | RNVC: 2
2-33401: RNCC: 3 | RNVC: 9

30 Aug 2000

3040-01-478-1999
Airc Spur Gearshaft

014781999
769009: RNCC: 3 | RNVC: 2

31 Aug 2000

3040-01-478-6001
Rigid Connecting Link

014786001
12466448: RNCC: 3 | RNVC: 2

20 Sep 2000

3040-01-479-1709
Spline Adapter

014791709
7-311B11134-5: RNCC: 3 | RNVC: 2
1593588-11: RNCC: 5 | RNVC: 2
1593588-11: RNCC: 5 | RNVC: 2
7-311B11134-5: RNCC: 5 | RNVC: 9

13 Oct 2000

3040-01-478-7794
Rigid Connecting Link

014787794
A22-41519-000: RNCC: 3 | RNVC: 2

27 Sep 2000

3040-01-479-4662
Control Cam

014794662
845-7286651 ITEM 18: RNCC: 3 | RNVC: 2

23 Oct 2000

3040-01-480-1890
Ai Shouldered Shaft

014801890
973448: RNCC: 3 | RNVC: 2

9 Nov 2000

3040-01-480-3976
Mechanical Drive Housing

014803976
9HB14: RNCC: 3 | RNVC: 2
9HB14: RNCC: 3 | RNVC: 9
GS-4608: RNCC: 5 | RNVC: 2

18 Nov 2000

3040-01-480-7593
Brake Band And Lining

014807593
24202229: RNCC: 3 | RNVC: 2
5740315: RNCC: 5 | RNVC: 2
3040PL1943929: RNCC: 6 | RNVC: 9

5 Dec 2000

3040-01-481-1667
Shouldered Shaft

014811667
859B01: RNCC: 3 | RNVC: 9
FM 86519 PC NO 30: RNCC: 5 | RNVC: 9
FM 86519: RNCC: D | RNVC: 9

20 Dec 2000

3040-01-481-2287
Shouldered Shaft

014812287
8100-1253-0238 FIND NO 572: RNCC: 3 | RNVC: 2
8100-1253-0238: RNCC: D | RNVC: 9

22 Dec 2000

3040-01-482-0364
Rigid Connecting Link

014820364
803-6397269 PC 22: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 48: RNCC: 5 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

6 Feb 2001

3040-01-482-2936
Bell Crank

014822936
L6410380-005: RNCC: 3 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2

14 Feb 2001

3040-01-482-4716
Rigid Connecting Link

014824716
8100-1251-0307 PC NO 59: RNCC: 3 | RNVC: 2
8100-1251-0307: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

23 Feb 2001

3040-01-482-8424
Piston Ring Set

014828424
3802831: RNCC: 3 | RNVC: 2
3802831: RNCC: 5 | RNVC: 2

6 Mar 2001

3040-01-483-3614
Multiple Disk Brake

014833614
76470: RNCC: 3 | RNVC: 2

27 Mar 2001

3040-01-483-4311
Rigid Connecting Link

014834311
75A353063-2005: RNCC: 3 | RNVC: 2

28 Mar 2001

3040-01-482-9942
Straight Shaft

014829942
7103271-2: RNCC: 3 | RNVC: 2
7103271: RNCC: D | RNVC: 9

13 Mar 2001

3040-01-485-0787
Hub Clamp

014850787
5489226: RNCC: 3 | RNVC: 2
5489224 PC 7: RNCC: 5 | RNVC: 2
5489224: RNCC: D | RNVC: 9

16 May 2001

3040-01-485-7569
Shouldered Shaft

014857569
693-10330-2: RNCC: 3 | RNVC: 2

6 Jun 2001

3040-01-488-6079
Linear Actuating Cylinder

014886079
721-7069909-34: RNCC: 3 | RNVC: 2
H861-1505-34: RNCC: 5 | RNVC: 2
H861-1505: RNCC: D | RNVC: 9
7069909: RNCC: D | RNVC: 9

29 Aug 2001

3040-01-491-7970
Ball Joint

014917970
60745K811: RNCC: 3 | RNVC: 2

1 Nov 2001

3040-01-489-1088
Counterbalance Weight

014891088
70219-01045-106: RNCC: 3 | RNVC: 2
70219-01045: RNCC: D | RNVC: 9

12 Sep 2001

3040-01-492-4333
Linear Actuating Cylinder Assembly Parts Kit

014924333
S26-58467-0: RNCC: 3 | RNVC: 2
S4-ML-3060A PAGE 16: RNCC: 5 | RNVC: 1
S26-58467-0: RNCC: 5 | RNVC: 9

28 Nov 2001

3040-01-493-4036
Linear Actuating Cylinder Piston

014934036
8675508: RNCC: 3 | RNVC: 2

4 Jan 2002

3040-01-493-4718
Push-Pull Control Assembly

014934718
23722: RNCC: 3 | RNVC: 2

8 Jan 2002

3040-01-494-4239
Shouldered Shaft

014944239
801409: RNCC: 3 | RNVC: 2
801409: RNCC: 3 | RNVC: 9
801409 ITEM NO. 6: RNCC: 5 | RNVC: 9
1801490 ITEM NO. 6: RNCC: 5 | RNVC: 9
1801490: RNCC: D | RNVC: 9

12 Feb 2002

3040-01-494-9022
Manual Control Lever

014949022
715178-A: RNCC: 3 | RNVC: 2

27 Feb 2002

3040-01-495-3798
Pawl

014953798
9HA868: RNCC: 3 | RNVC: 2
9HA868: RNCC: 3 | RNVC: 9
LEELC046GH-1SS: RNCC: 5 | RNVC: 2

14 Mar 2002

3040-01-495-3664
Rigid Connecting Link

014953664
4726-109: RNCC: 3 | RNVC: 2
74B463604-109: RNCC: 7 | RNVC: 2

14 Mar 2002

3040-01-495-6253
Control Cam

014956253
1997-34-3: RNCC: 3 | RNVC: 2
P000161: RNCC: 5 | RNVC: 2

21 Mar 2002

3040-01-495-8283
Spline Adapter

014958283
3-52443-3: RNCC: 3 | RNVC: 2
3-52443: RNCC: D | RNVC: 9

26 Mar 2002

3040-01-496-3673
Mechanically Actuated Spindle

014963673
29537933: RNCC: 3 | RNVC: 2
22KP568: RNCC: 5 | RNVC: 1

12 Apr 2002

3040-01-497-2754
Transmission Sleeve

014972754
7052623: RNCC: 3 | RNVC: 2
7052623: RNCC: 5 | RNVC: 2

15 May 2002

3040-01-497-7690
Shouldered Shaft Assembly

014977690
0753227: RNCC: 3 | RNVC: 2

4 Jun 2002

3040-01-497-2039
Mechanically Actuated Spindle

014972039
S18334-006: RNCC: 3 | RNVC: 2
B-801-S18334-006: RNCC: 5 | RNVC: 2
S18943 IT #11: RNCC: 5 | RNVC: 2

13 May 2002

3040-01-498-8198
Shouldered Shaft

014988198
A260C-99: RNCC: 3 | RNVC: 2

2 Jul 2002

3040-01-499-2862
Hub Clamp

014992862
15110: RNCC: 3 | RNVC: 2
8L006: RNCC: 5 | RNVC: 2

18 Jul 2002

3040-01-499-0917
Linear Actuating Cylinder Piston

014990917
563-6984943-106: RNCC: 3 | RNVC: 2
H552-0405-106: RNCC: 5 | RNVC: 2
563-6984943: RNCC: D | RNVC: 9

12 Jul 2002

3040-01-500-0210
Remote Control Lever

015000210
563-7066808-85: RNCC: 3 | RNVC: 2
H552-0603-85: RNCC: 5 | RNVC: 2
563-7066808: RNCC: D | RNVC: 9

12 Aug 2002

3040-01-501-6930
Spur Gearshaft

015016930
20818: RNCC: 3 | RNVC: 2

10 Oct 2002

3040-01-501-4554
Rigid Connecting Link

015014554
805-1623943 PC 19: RNCC: 3 | RNVC: 2
803-1041890 PC 48: RNCC: 3 | RNVC: 2
803-1623943 PC PC 19: RNCC: 5 | RNVC: 2
805-1623943: RNCC: D | RNVC: 9
1041890: RNCC: D | RNVC: 9
1623943: RNCC: D | RNVC: 9

2 Oct 2002

3040-01-503-3421
Straight Shaft

015033421
4503363-2: RNCC: 3 | RNVC: 2

12 Dec 2002

3040-01-503-3478
Universal Drive Shaft

015033478
1321175: RNCC: 3 | RNVC: 2
1321175: RNCC: 5 | RNVC: 9
501006961: RNCC: 5 | RNVC: 9

13 Dec 2002

3040-01-503-6246
Spacer Tube

015036246
6623482: RNCC: 3 | RNVC: 2
6623482: RNCC: 5 | RNVC: 9

30 Dec 2002

3040-01-503-6474
Rigid Connecting Link

015036474
6623527: RNCC: 3 | RNVC: 2
6623527: RNCC: 5 | RNVC: 9

2 Jan 2003

3040-01-503-7814
Shouldered Shaft

015037814
15470N18A: RNCC: 3 | RNVC: 2
4X8RS10X5: RNCC: 3 | RNVC: 9
15469N18-10: RNCC: 5 | RNVC: 9
PL-15469N18-10: RNCC: 5 | RNVC: 9
4X8RS10X5: RNCC: C | RNVC: 1
PL-15469N18-10: RNCC: C | RNVC: 1
15469N18-10: RNCC: C | RNVC: 1
15469N18: RNCC: D | RNVC: 9

8 Jan 2003

3040-01-503-8985
Flexible Drive Shaft

015038985
7491071: RNCC: 3 | RNVC: 2
7491071: RNCC: 5 | RNVC: 2

13 Jan 2003

3040-01-504-9909
Push-Pull Control Assembly

015049909
21407230: RNCC: 3 | RNVC: 2
C-C-10617: RNCC: 5 | RNVC: 9
3851051 17 VLVO: RNCC: 5 | RNVC: 9
C-C-10617: RNCC: 5 | RNVC: 9
3851051-17: RNCC: 5 | RNVC: 9

18 Feb 2003

3040-01-505-1159
Shouldered Axle

015051159
T003224299: RNCC: 3 | RNVC: 2
T003224299: RNCC: 3 | RNVC: 9
A31170020 ITEM 11: RNCC: 5 | RNVC: 9
A31170020: RNCC: D | RNVC: 9

24 Feb 2003

3040-01-505-3322
Nonrotating Shaft Eye Bracket

015053322
5599884-10: RNCC: 3 | RNVC: 2

4 Mar 2003

3040-01-505-9354
Rigid Connecting Link

015059354
12422798: RNCC: 3 | RNVC: 2
12422798: RNCC: 5 | RNVC: 2
12422798: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-505-9356
Rigid Connecting Link

015059356
12422799: RNCC: 3 | RNVC: 2
12422799: RNCC: 5 | RNVC: 2
12422799: RNCC: 5 | RNVC: 2

19 Mar 2003

3040-01-507-7531
Planetary Gears Carrier

015077531
3004319: RNCC: 3 | RNVC: 2
3004319: RNCC: 5 | RNVC: 9

5 May 2003

3040-01-509-2985
Straight Shaft

015092985
78902 2: RNCC: 3 | RNVC: 2

18 Jun 2003

3040-01-509-9914
Spur Gearshaft

015099914
25714: RNCC: 3 | RNVC: 2

10 Jul 2003

3040-01-512-0474
Rigid Connecting Link

015120474
8M0008111: RNCC: 3 | RNVC: 2
883082: RNCC: 5 | RNVC: 9

21 Aug 2003

3040-01-511-8974
Body Hub

015118974
A5462-1: RNCC: 3 | RNVC: 2

19 Aug 2003

3040-01-511-9995
Spur Gearshaft

015119995
3313100: RNCC: 3 | RNVC: 2
3313100: RNCC: 3 | RNVC: 9
921900-1326: RNCC: 5 | RNVC: 9

20 Aug 2003

3040-01-512-3071
Accumulator Cap

015123071
R87525: RNCC: 3 | RNVC: 9
200134AEPC415: RNCC: 5 | RNVC: 9
200134AEPC415: RNCC: 5 | RNVC: 9
R87525: RNCC: 5 | RNVC: 9
R87525: RNCC: C | RNVC: 1
200134AEPC415: RNCC: C | RNVC: 1
200134AEPC415: RNCC: C | RNVC: 1
R87525: RNCC: C | RNVC: 1

27 Aug 2003

3040-01-512-3708
Master Rebuild Kit

015123708
90-015-3071: RNCC: 3 | RNVC: 2

28 Aug 2003

3040-01-512-7788
Shaft Retaining Plate

015127788
97007-1-4: RNCC: 3 | RNVC: 2

10 Sep 2003

3040-01-512-9407
Linear Actuating Cylinder Cap

015129407
C-6690P: RNCC: 3 | RNVC: 2

15 Sep 2003

3040-01-512-9971
Nonrotating Shaft Eye Bracket

015129971
12309-1-151-000: RNCC: 3 | RNVC: 2
12270-PL FIND NO. 22: RNCC: 5 | RNVC: 2

16 Sep 2003

3040-01-513-0895
Linear Actuating Cylinder Assembly

015130895
21903269: RNCC: 3 | RNVC: 2

17 Sep 2003

3040-01-513-1834
Linear Actuating Cylinder Assembly Parts Kit

015131834
8M0090322: RNCC: 3 | RNVC: 2
878412A 1: RNCC: 5 | RNVC: 9
878412A 02: RNCC: 5 | RNVC: 9

19 Sep 2003

3040-01-513-1824
Linear Actuating Cylinder Assembly

015131824
8M0142998: RNCC: 3 | RNVC: 2
878235A02: RNCC: 5 | RNVC: 2
878235A03: RNCC: 5 | RNVC: 9
878235A 1: RNCC: 5 | RNVC: 9

19 Sep 2003

3040-01-513-7620
Shouldered Shaft

015137620
7028977: RNCC: 3 | RNVC: 2
8036609: RNCC: 5 | RNVC: 9
8036609: RNCC: 5 | RNVC: 9
0734 309 356: RNCC: 5 | RNVC: 9

6 Oct 2003

3040-01-513-7431
Striker Nut Plate Weldment

015137431
8036059: RNCC: 3 | RNVC: 2
D55088: RNCC: 5 | RNVC: 2
8036059: RNCC: 5 | RNVC: 9

4 Oct 2003

3040-01-514-1759
Control Cam

015141759
9G7350: RNCC: 3 | RNVC: 2

20 Oct 2003

3040-01-514-7373
Shouldered Shaft

015147373
21364-1002-1: RNCC: 3 | RNVC: 2
21364 FIND 5: RNCC: 5 | RNVC: 9

4 Nov 2003

3040-01-514-7388
Shouldered Shaft

015147388
21361-1003-1: RNCC: 3 | RNVC: 2
21361 FIND 7: RNCC: 5 | RNVC: 2

4 Nov 2003

3040-01-515-0196
Cushion Adj Needle

015150196
A-83239: RNCC: 3 | RNVC: 2
83239: RNCC: 5 | RNVC: 2

13 Nov 2003

3040-01-515-2148
Cylinder Mounti Rod

015152148
3332978: RNCC: 3 | RNVC: 2
3332978: RNCC: 3 | RNVC: 9

18 Nov 2003

3040-01-515-6916
Linear Actuating Cylinder

015156916
R433008142: RNCC: 3 | RNVC: 2
C194065 REV A C 194065-3960: RNCC: 5 | RNVC: 2
173734: RNCC: 5 | RNVC: 2
C194065-3960: RNCC: 5 | RNVC: 9
C194065-3960: RNCC: 5 | RNVC: 9

4 Dec 2003

3040-01-516-5825
Straight Shaft

015165825
5861282: RNCC: 3 | RNVC: 2
2080327: RNCC: 5 | RNVC: 9
4419266: RNCC: 5 | RNVC: 9
170-6678: RNCC: 5 | RNVC: 9

12 Jan 2004

3040-01-519-7266
Aircraft Guide Ring

015197266
21C8219P36: RNCC: 3 | RNVC: 2
21C8219P36: RNCC: 3 | RNVC: 9

29 Apr 2004

3040-01-518-7134
Linear Actuating Cylinder Assembly

015187134
AD35540-2: RNCC: 3 | RNVC: 2
AD35540: RNCC: 5 | RNVC: 2

20 Mar 2004

3040-01-520-3245
Housing Adapter

015203245
ENERPAC GA-3: RNCC: 3 | RNVC: 1
ENERPAC GA-3: RNCC: 5 | RNVC: 2
GA-3: RNCC: 5 | RNVC: 2
GA-3: RNCC: 5 | RNVC: 2
809529ITEM18: RNCC: 5 | RNVC: 9

7 May 2004

3040-01-520-3514
Manual Control Lever

015203514
7264921-002: RNCC: 3 | RNVC: 2
7264921-002: RNCC: 5 | RNVC: 9

10 May 2004

3040-01-520-6757
Bell Crank

015206757
64379: RNCC: 3 | RNVC: 2

21 May 2004

3040-01-521-0147
Flexible Drive Shaft

015210147
1606880-0156: RNCC: 3 | RNVC: 2
2102211 SH 45 ITEM NO 1: RNCC: 5 | RNVC: 2

7 Jun 2004

3040-01-520-6770
Multiple Gears Gearshaft

015206770
76346-F-2: RNCC: 3 | RNVC: 2
76346-F-2: RNCC: 3 | RNVC: 9
76346-F-2: RNCC: 5 | RNVC: 2

21 May 2004

3040-01-522-8068
Brake Drum Adapter

015228068
14026: RNCC: 3 | RNVC: 2
26KP499: RNCC: 5 | RNVC: 2
26KP499: RNCC: 5 | RNVC: 9

12 Aug 2004

3040-01-523-0401
Linear Actuating Cylinder Piston Rod

015230401
20015086-10: RNCC: 3 | RNVC: 2
20015086-10: RNCC: 3 | RNVC: 9
20015086-10: RNCC: 5 | RNVC: 2
20015086: RNCC: D | RNVC: 9

18 Aug 2004

3040-01-523-3663
Mechanically Actuated Spindle

015233663
EJ-21266: RNCC: 3 | RNVC: 2
EJ-52031 ITEM 2: RNCC: 5 | RNVC: 2
EJ-22286: RNCC: 5 | RNVC: 2

31 Aug 2004

3040-01-522-2179
Pawl

015222179
A109241-101-11: RNCC: 3 | RNVC: 2
A107950-101-11, ITEM 62: RNCC: 5 | RNVC: 2
A109241-101-11: RNCC: 5 | RNVC: 9
A107950-101-11, ITEM 62: RNCC: 5 | RNVC: 9

22 Jul 2004

3040-01-522-3462
Control Cam

015223462
P12619141: RNCC: 3 | RNVC: 2
P12619141: RNCC: 3 | RNVC: 9

28 Jul 2004

3040-01-525-0768
Flexible Shaft Assembly Casing

015250768
10053603: RNCC: 3 | RNVC: 2
223F435: RNCC: 7 | RNVC: 1

27 Oct 2004

3040-01-526-8318
Shouldered Shaft Assembly

015268318
9893508G9: RNCC: 3 | RNVC: 2
9893508G009: RNCC: 5 | RNVC: 2

8 Jan 2005

3040-01-458-1501
Grease Cap

014581501
845-7069126-X-2: RNCC: 3 | RNVC: 1

14 Aug 1998

3040-01-458-9046
Linear Actuating Cylinder Assembly

014589046
6-372-004357: RNCC: 3 | RNVC: 2

15 Sep 1998

3040-01-459-1016
Straight Shaft

014591016
342-6726633 FIND 9: RNCC: 3 | RNVC: 2

21 Sep 1998

3040-01-459-5141
Control Cable Assembly

014595141
CMG/128214: RNCC: 3 | RNVC: 2
128214: RNCC: 3 | RNVC: 9
407928: RNCC: 5 | RNVC: 9

5 Oct 1998

3040-01-460-1600
Hydraulic Accumulator Bladder

014601600
190.302-00225: RNCC: 3 | RNVC: 2
163301: RNCC: 5 | RNVC: 9
163301: RNCC: 5 | RNVC: 9

28 Oct 1998

3040-01-460-0655
Straight Axle

014600655
9383165-1: RNCC: 3 | RNVC: 2

23 Oct 1998

3040-01-461-3370
Spur Gearshaft

014613370
706017-9X: RNCC: 3 | RNVC: 2
23713X-2: RNCC: 3 | RNVC: 9

9 Dec 1998

3040-01-461-9014
Linear Actuating Cylinder Assembly

014619014
1H2H0A00265269: RNCC: 3 | RNVC: 2
1.50CF/H-2HLTVS13C X 77.000: RNCC: 5 | RNVC: 1
1H000020804: RNCC: 5 | RNVC: 9
5038013: RNCC: 5 | RNVC: 9
AG189982B0: RNCC: 5 | RNVC: 9

11 Jan 1999

3040-01-462-1286
Linear Actuating Cylinder Piston

014621286
24205250: RNCC: 3 | RNVC: 2
5714964: RNCC: 5 | RNVC: 2
24205250: RNCC: 5 | RNVC: 9
3040PL0848646: RNCC: 6 | RNVC: 9

21 Jan 1999

3040-01-468-1493
Shouldered Shaft

014681493
793574-5: RNCC: 3 | RNVC: 2

30 Sep 1999

3040-01-468-8586
Straight Shaft

014688586
3T-4568: RNCC: 3 | RNVC: 9

25 Oct 1999

3040-01-469-6991
Nonrotating Shaft Eye Bracket

014696991
803-6397269 PC162: RNCC: 3 | RNVC: 2
6397269: RNCC: D | RNVC: 9

19 Nov 1999

3040-01-469-9365
Rigid Connecting Link

014699365
805-1623943 PC 23: RNCC: 3 | RNVC: 2
803-1041890 PC 49: RNCC: 3 | RNVC: 2
803-1623943 PC PC 23: RNCC: 5 | RNVC: 2
1041890: RNCC: D | RNVC: 9
805-1623943: RNCC: D | RNVC: 9
1623943: RNCC: D | RNVC: 9

1 Dec 1999

3040-01-470-2408
Mechanically Actuated Spindle

014702408
124-4366739 PC 18: RNCC: 3 | RNVC: 2
124-4366739: RNCC: D | RNVC: 9

13 Dec 1999

3040-01-470-3906
Flexible Drive Shaft

014703906
32880: RNCC: 3 | RNVC: 2

17 Dec 1999

3040-01-470-5504
Manual Control Lever

014705504
10123001120: RNCC: 3 | RNVC: 2
20158-31: RNCC: 5 | RNVC: 2
A10123.001.120: RNCC: 5 | RNVC: 9
20158: RNCC: D | RNVC: 9

23 Dec 1999

3040-01-462-6819
Shouldered Shaft

014626819
739784: RNCC: 3 | RNVC: 2

12 Feb 1999

3040-01-463-1825
Shouldered Shaft

014631825
151-1789: RNCC: 3 | RNVC: 2
151-1789: RNCC: 5 | RNVC: 9

10 Mar 1999

3040-01-462-9974
Rigid Connecting Link

014629974
741085A00: RNCC: 3 | RNVC: 2
741085-A: RNCC: 5 | RNVC: 9
8-35-5: RNCC: 5 | RNVC: 9

1 Mar 1999

3040-01-463-2814
Rigid Connecting Link

014632814
741096-A: RNCC: 3 | RNVC: 2
8-24-20: RNCC: 5 | RNVC: 2
741096A00: RNCC: 5 | RNVC: 2

15 Mar 1999

3040-01-464-0549
Rigid Connecting Link

014640549
803-6397268 PC 54: RNCC: 3 | RNVC: 2
803-6397269 PC 28: RNCC: 5 | RNVC: 2
6397268: RNCC: D | RNVC: 9
6397269: RNCC: D | RNVC: 9

14 Apr 1999

3040-01-464-0751
Multiple Disk Brake

014640751
90B2A3G067: RNCC: 3 | RNVC: 2

15 Apr 1999

3040-01-464-1024
Shouldered Shaft

014641024
90-004-1043: RNCC: 3 | RNVC: 2

15 Apr 1999

3040-01-465-0133
Linear Actuating Cylinder Piston

014650133
39767: RNCC: 3 | RNVC: 2
30093-37175 ITEM 7: RNCC: 5 | RNVC: 2

19 May 1999

3040-01-465-5231
Nonrotating Shaft Eye Bracket

014655231
12465410: RNCC: 3 | RNVC: 2
12465410: RNCC: 5 | RNVC: 9

11 Jun 1999

3040-01-466-2050
Linear Actuating Cylinder Cap

014662050
845-7069127-X-10: RNCC: 3 | RNVC: 1

9 Jul 1999

3040-01-467-7968
Linear Actuating Cylinder Assembly

014677968
AG201171A0: RNCC: 3 | RNVC: 2

15 Sep 1999

3040-01-473-6313
Straight Shaft

014736313
13495162: RNCC: 3 | RNVC: 2
13588726: RNCC: 5 | RNVC: 2
MIS-PRF-53514: RNCC: 5 | RNVC: 9

12 Apr 2000

3040-01-474-4834
Control Cam

014744834
RE56578: RNCC: 3 | RNVC: 9

4 May 2000

3040-01-475-3039
Spur Gearshaft

014753039
12462851: RNCC: 3 | RNVC: 2

31 May 2000

3040-01-475-5020
Rigid Connecting Link

014755020
124-4322615 PC 19: RNCC: 3 | RNVC: 2
4322615: RNCC: D | RNVC: 9

6 Jun 2000

3040-01-475-6622
Rigid Connecting Link

014756622
845-6655309 ITEM 5-2: RNCC: 3 | RNVC: 2
2640-682-09 ITEM 5-2: RNCC: 5 | RNVC: 2
2640-682-09: RNCC: D | RNVC: 9
6655309: RNCC: D | RNVC: 9

8 Jun 2000

3040-01-477-1876
Shaft Retaining Plate

014771876
9904101298: RNCC: 3 | RNVC: 2

2 Aug 2000

3040-01-477-1295
Piston Ring

014771295
9904105953: RNCC: 3 | RNVC: 2

1 Aug 2000

3040-01-477-2915
Multiple Gears Gearshaft

014772915
9904106129: RNCC: 3 | RNVC: 2

4 Aug 2000

3040-01-477-5051
Shouldered Shaft

014775051
8100-1253-0238 PT NO 614: RNCC: 3 | RNVC: 2
CATALOG NO. 43110-136: RNCC: 3 | RNVC: 2
8100-1251-0192 PC 91: RNCC: 3 | RNVC: 2
8100-1251-0192: RNCC: D | RNVC: 9

10 Aug 2000

3040-01-478-0526
Linear Actuating Cylinder Assembly

014780526
6372005774: RNCC: 3 | RNVC: 2

29 Aug 2000

3040-01-479-5579
Mechanically Actuated Spindle

014795579
44227-037: RNCC: 3 | RNVC: 2
8100-1256-0305 PC NO 27: RNCC: 5 | RNVC: 2
8100-1256-0305: RNCC: D | RNVC: 9

25 Oct 2000

3040-01-479-9532
Straight Shaft

014799532
12416455: RNCC: 3 | RNVC: 2
12416455: RNCC: 5 | RNVC: 2
12416455: RNCC: 5 | RNVC: 2

2 Nov 2000

3040-01-479-8411
Straight Shaft

014798411
LG2020-10: RNCC: 3 | RNVC: 2
LG1930-01 ITEM 3: RNCC: 5 | RNVC: 2
LG1930-01: RNCC: D | RNVC: 9

31 Oct 2000

3040-01-480-7591
Spur Gearshaft

014807591
5714954: RNCC: 3 | RNVC: 2
24204291: RNCC: 3 | RNVC: 9
24241428: RNCC: 5 | RNVC: 2
3040PL0739466: RNCC: 6 | RNVC: 9

5 Dec 2000

3040-01-480-4797
Linear Actuating Cylinder Piston

014804797
08661271: RNCC: 3 | RNVC: 2
8661271: RNCC: 3 | RNVC: 2
5714304: RNCC: 5 | RNVC: 2
3040PL1970214: RNCC: 6 | RNVC: 9

22 Nov 2000

3040-01-481-2251
Shouldered Shaft

014812251
8100-1253-0238 PT NO 571: RNCC: 3 | RNVC: 2
8100-1253-0238: RNCC: D | RNVC: 9

22 Dec 2000

3040-01-481-6383
Airc Spur Gearshaft

014816383
10052679: RNCC: 3 | RNVC: 2

18 Jan 2001

3040-01-482-1093
Stroke Assembly

014821093
12446283: RNCC: 3 | RNVC: 2

8 Feb 2001

3040-01-482-4754
Rigid Connecting Link

014824754
8100-1251-0192 PC 138: RNCC: 3 | RNVC: 2
8100-1251-0307 PC NO 71: RNCC: 3 | RNVC: 2
6397269: RNCC: D | RNVC: 9
8100-1251-0192: RNCC: D | RNVC: 9
8100-1251-0307: RNCC: D | RNVC: 9

23 Feb 2001

3040-01-482-4451
Electrical-Fluid Pressure Connector Assembly

014824451
9333102418: RNCC: 3 | RNVC: 9
9333102418: RNCC: 5 | RNVC: 2

22 Feb 2001

3040-01-483-1829
Straight Shaft Assembly

014831829
16101551-011: RNCC: 3 | RNVC: 2
16101551-011: RNCC: 5 | RNVC: 2
16101551-011: RNCC: 5 | RNVC: 2

19 Mar 2001

3040-01-484-7330
Straight Shaft

014847330
122-6776889 PC 10: RNCC: 3 | RNVC: 2
6776889: RNCC: D | RNVC: 9

7 May 2001

3040-01-492-6439
Counterbalance Weight

014926439
5D88089-007: RNCC: 3 | RNVC: 2
6512E29FN55: RNCC: 5 | RNVC: 2
6512E29: RNCC: D | RNVC: 9

7 Dec 2001

3040-01-494-4691
Manual Control Lever

014944691
6593000094: RNCC: 3 | RNVC: 2

13 Feb 2002

3040-01-494-9108
Rigid Connecting Link

014949108
196800-K1: RNCC: 3 | RNVC: 2

27 Feb 2002

3040-01-485-0779
Remote Control Lever

014850779
064-47482-005: RNCC: 3 | RNVC: 2
364-48946-000 ITEM 103: RNCC: 5 | RNVC: 9
064-47482B005: RNCC: 5 | RNVC: 9

16 May 2001

3040-01-494-9021
Manual Control Lever

014949021
715178-B: RNCC: 3 | RNVC: 2

27 Feb 2002

3040-01-485-5378
Pawl

014855378
741247-A: RNCC: 3 | RNVC: 2
8-25-15: RNCC: D | RNVC: 9

30 May 2001

3040-01-485-9609
Shouldered Shaft

014859609
167-7066804-70: RNCC: 3 | RNVC: 2
H547-2002-70: RNCC: 5 | RNVC: 2
7066804: RNCC: D | RNVC: 9

13 Jun 2001

3040-01-488-7680
Rigid Connecting Link

014887680
124-7386936 PC 41: RNCC: 3 | RNVC: 2
124-7386972 PC 67: RNCC: 5 | RNVC: 2
124-7386936: RNCC: D | RNVC: 9
124-7386972: RNCC: D | RNVC: 9

4 Sep 2001

Load More Results