What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 121 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 121of 575

3040-01-603-9761
Bell Crank

016039761
R0147354: RNCC: 3 | RNVC: 2
R0147354: RNCC: 5 | RNVC: 2
R0147354-0103: RNCC: D | RNVC: 9

23 Mar 2012

3040-01-605-3975
Hydraulic Control Assembly

016053975
347/20856: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-604-8239
Mechanical Drive Housing

016048239
12549117: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-606-0085
Multiple Gears Gearshaft

016060085
53362: RNCC: 3 | RNVC: 2

3 May 2012

3040-01-606-0165
Shouldered Shaft

016060165
25KP176: RNCC: 3 | RNVC: 2
25KP176: RNCC: 3 | RNVC: 9

3 May 2012

3040-01-606-1467
Body Hub

016061467
CR1612: RNCC: 3 | RNVC: 2

9 May 2012

3040-01-606-6661
Shaft Collar

016066661
42093D79: RNCC: 3 | RNVC: 2
42093D79: RNCC: 5 | RNVC: 2

22 May 2012

3040-01-606-7609
Flexible Casing End Fitting

016067609
2ABS12011: RNCC: 3 | RNVC: 2
2ABS12011: RNCC: 3 | RNVC: 9

23 May 2012

3040-01-607-1095
Shaft Retaining Plate

016071095
R8505956-SP102: RNCC: 3 | RNVC: 2
R8505956-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-608-3074
Mechanical Drive Housing

016083074
1641-8294A19: RNCC: 3 | RNVC: 2

22 Jun 2012

3040-01-608-4970
Shaft Collar

016084970
3808440: RNCC: 3 | RNVC: 2
3808440: RNCC: 5 | RNVC: 9

28 Jun 2012

3040-01-559-4817
Pneumatic Actuator Cylinder Housing

015594817
89U200463JJ0133: RNCC: 3 | RNVC: 2
80-0355: RNCC: 5 | RNVC: 2

19 Dec 2007

3040-01-560-2688
Pivot Shaft Assembly

015602688
4660128-002: RNCC: 3 | RNVC: 2
4660128-0002: RNCC: 3 | RNVC: 9
4660128-002: RNCC: 5 | RNVC: 2
4660128-01M1: RNCC: 5 | RNVC: 9
4660128-002: RNCC: 5 | RNVC: 9
4660128: RNCC: D | RNVC: 9

23 Jan 2008

3040-01-560-8083
Helical Gear And Shaft Assembly

015608083
5397: RNCC: 3 | RNVC: 2

13 Feb 2008

3040-01-559-4464
Rigid Connecting Link

015594464
74A410576-1005: RNCC: 3 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 2
74A410576-1005: RNCC: 5 | RNVC: 9
74A410576-1005: RNCC: 5 | RNVC: 9
10448312: RNCC: 6 | RNVC: 9
74A410576-1005: RNCC: C | RNVC: 1

18 Dec 2007

3040-01-547-6239
Linear Actuating Cylinder Piston

015476239
16242006-1: RNCC: 3 | RNVC: 2
16241014 FIND NO. 7: RNCC: 5 | RNVC: 2
16242006-1: RNCC: 5 | RNVC: 9

26 Jan 2007

3040-01-553-7494
Rigid Connecting Link

015537494
036361: RNCC: 3 | RNVC: 9
36361: RNCC: 5 | RNVC: 9
36361: RNCC: 5 | RNVC: 9
036361: RNCC: 5 | RNVC: 9
036361: RNCC: 5 | RNVC: 9

24 Jul 2007

3040-01-559-0338
Rigid Connecting Link

015590338
P40840: RNCC: 3 | RNVC: 2
P40840: RNCC: 3 | RNVC: 2
AMBK4-4058: RNCC: 5 | RNVC: 2
P40840: RNCC: 5 | RNVC: 2

3 Dec 2007

3040-01-554-2714
Planetary Gears Carrier

015542714
29531249: RNCC: 3 | RNVC: 2

3 Aug 2007

3040-01-553-9926
Housing Adapter

015539926
77872973: RNCC: 3 | RNVC: 2
77872973: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-559-8295
Straight Shaft

015598295
802011213907-1: RNCC: 3 | RNVC: 2

8 Jan 2008

3040-01-559-8729
Turn Signal Housing

015598729
7HB417: RNCC: 3 | RNVC: 2
7HB417: RNCC: 3 | RNVC: 9
456116: RNCC: 5 | RNVC: 2

8 Jan 2008

3040-01-561-8536
Shouldered Shaft

015618536
AM0-0121P: RNCC: 3 | RNVC: 2
AM0-0121: RNCC: 3 | RNVC: 9

20 Mar 2008

3040-01-562-0887
Linear Actuating Cylinder Assembly Parts Kit

015620887
3J16630: RNCC: 3 | RNVC: 2

28 Mar 2008

3040-01-555-0812
Control Cable Assembly

015550812
18505909: RNCC: 3 | RNVC: 2
18505900 / PN-8505909: RNCC: 5 | RNVC: 2

29 Aug 2007

3040-01-562-2122
Shouldered Shaft

015622122
AM0-0089: RNCC: 3 | RNVC: 2

2 Apr 2008

3040-01-563-0477
Nonaircraft Mechanical Actuator

015630477
880665T01: RNCC: 3 | RNVC: 2
880665T01: RNCC: 5 | RNVC: 2
880665T01: RNCC: 5 | RNVC: 2

30 Apr 2008

3040-01-563-4903
Manual Control Lever

015634903
155L3151K: RNCC: 3 | RNVC: 2

13 May 2008

3040-01-563-5160
Rigid Connecting Link

015635160
6031769: RNCC: 3 | RNVC: 2

13 May 2008

3040-01-563-6616
Worm Shaft

015636616
993800-2: RNCC: 3 | RNVC: 2
993015 ITEM 37: RNCC: 5 | RNVC: 2

16 May 2008

3040-01-557-4807
Rigid Connecting Link

015574807
HP892105-1: RNCC: 3 | RNVC: 2
HP892105-1: RNCC: 3 | RNVC: 9

24 Oct 2007

3040-01-526-5028
Flexible Shaft Assembly

015265028
65042-97FT0IN: RNCC: 3 | RNVC: 2
P-2366 SH 3, FN 9: RNCC: 5 | RNVC: 2
65042-097FT0IN: RNCC: 5 | RNVC: 9

20 Dec 2004

3040-01-527-1493
Body Hub

015271493
SDS1-1/8: RNCC: 3 | RNVC: 2
7010437: RNCC: 3 | RNVC: 2
05506-SDS1-1/8: RNCC: 5 | RNVC: 9

21 Jan 2005

3040-01-527-3395
Rigid Connecting Link

015273395
69-9605-18: RNCC: 3 | RNVC: 2
69-9605: RNCC: D | RNVC: 9

28 Jan 2005

3040-01-527-3390
Rigid Connecting Link

015273390
69-9605-20: RNCC: 3 | RNVC: 2
69-9605: RNCC: D | RNVC: 9

28 Jan 2005

3040-01-528-5400
Rigid Connecting Link

015285400
74A672480-2003: RNCC: 3 | RNVC: 2

17 Mar 2005

3040-01-530-0755
Shaft Collar

015300755
BA020383071503: RNCC: 3 | RNVC: 2
602-038300-0011: RNCC: 5 | RNVC: 2
602-038300-0011: RNCC: 5 | RNVC: 9

13 May 2005

3040-01-530-0491
Hub Clamp

015300491
20038184: RNCC: 3 | RNVC: 2
SC2-1250: RNCC: C | RNVC: 1

12 May 2005

3040-01-528-2817
Linear Actuating Cylinder Assembly

015282817
213.24.620.06: RNCC: 3 | RNVC: 2

9 Mar 2005

3040-01-528-1595
Rigid Connecting Link

015281595
APC30055: RNCC: 3 | RNVC: 2
APC30055: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-530-0763
Shaft Collar

015300763
BA020383174100: RNCC: 3 | RNVC: 2
602-038310-0018: RNCC: 5 | RNVC: 2
BA0200383174100: RNCC: 5 | RNVC: 9
602-038310-0018: RNCC: 5 | RNVC: 9

13 May 2005

3040-01-530-4163
Shaft And Tube Support Assembly

015304163
754-6726717-AY96: RNCC: 3 | RNVC: 2
6726717 AY96: RNCC: 5 | RNVC: 2
211096748: RNCC: 5 | RNVC: 2
211096748: RNCC: 5 | RNVC: 9

26 May 2005

3040-01-530-0926
Rigid Connecting Link

015300926
393HN3047-1: RNCC: 3 | RNVC: 2
393HN3047-1: RNCC: 5 | RNVC: 9
393HN3047-1: RNCC: 5 | RNVC: 9

13 May 2005

3040-01-530-1998
Control Cam

015301998
7642216: RNCC: 3 | RNVC: 2

18 May 2005

3040-01-530-5181
Spur Gearshaft

015305181
152651: RNCC: 3 | RNVC: 2

1 Jun 2005

3040-01-527-7357
Flexible Shaft Assembly

015277357
107318-A1 REV C: RNCC: 3 | RNVC: 2
107318-A1: RNCC: 5 | RNVC: 9
GWB 687.35: RNCC: 5 | RNVC: 9

15 Feb 2005

3040-01-534-7886
Control Cam

015347886
123AM40034-15: RNCC: 3 | RNVC: 2
123AM40034-15: RNCC: 5 | RNVC: 9
123AM40034: RNCC: D | RNVC: 9

2 Nov 2005

3040-01-534-7438
Shouldered Shaft

015347438
DTA183072: RNCC: 3 | RNVC: 2
DTA183072: RNCC: 5 | RNVC: 2

1 Nov 2005

3040-01-536-3889
Control Cam

015363889
A-582: RNCC: 3 | RNVC: 2

3 Jan 2006

3040-01-535-9809
Housing Adapter

015359809
7-311330131-9: RNCC: 3 | RNVC: 2
7-311330131: RNCC: E | RNVC: 8

15 Dec 2005

3040-01-536-8085
Shouldered Shaft

015368085
6426976-1: RNCC: 3 | RNVC: 2
6426976-1: RNCC: 3 | RNVC: 9
30B95-46C: RNCC: 5 | RNVC: 2

17 Jan 2006

3040-01-537-3478
Remote Control Lever

015373478
047-070-00: RNCC: 3 | RNVC: 9

3 Feb 2006

3040-01-539-4352
Shouldered Shaft

015394352
3-55598-2: RNCC: 3 | RNVC: 2

20 Apr 2006

3040-01-541-8537
Linear Actuating Cylinder Assembly

015418537
3301387: RNCC: 3 | RNVC: 2
4HB878: RNCC: 5 | RNVC: 2
4HB878: RNCC: 5 | RNVC: 9

13 Jul 2006

3040-01-541-2121
Control Pedal

015412121
1000195-0102: RNCC: 1 | RNVC: 2
05-20110-001: RNCC: 3 | RNVC: 2
131508: RNCC: 3 | RNVC: 9
0421-HH4-007: RNCC: 5 | RNVC: 2
132244: RNCC: 5 | RNVC: 9
4001376: RNCC: 5 | RNVC: 9
0421-HH4: RNCC: D | RNVC: 9

20 Jun 2006

3040-01-541-9393
Tension Spring Assembly

015419393
31B63-00500: RNCC: 3 | RNVC: 2
31B63-00500: RNCC: 3 | RNVC: 9

18 Jul 2006

3040-01-541-1488
Straight Shaft

015411488
GTHB-99-17-045-0: RNCC: 3 | RNVC: 2

16 Jun 2006

3040-01-540-0437
Shouldered Shaft

015400437
7491073: RNCC: 3 | RNVC: 2
8878051122: RNCC: 5 | RNVC: 2
7491073: RNCC: 5 | RNVC: 2

8 May 2006

3040-01-544-5908
Housing Adapter

015445908
2207171: RNCC: 3 | RNVC: 2

17 Oct 2006

3040-01-545-2758
Rigid Connecting Link

015452758
5V4998: RNCC: 3 | RNVC: 2
5V-4998: RNCC: 5 | RNVC: 2

7 Nov 2006

3040-01-545-6529
Linear Actuating Cylinder Head

015456529
595/27704: RNCC: 3 | RNVC: 2

20 Nov 2006

3040-01-546-1251
Ai Fill Pump Ac Oil

015461251
061476-100: RNCC: 3 | RNVC: 2

7 Dec 2006

3040-01-546-1824
Flexible Shaft Assembly Casing

015461824
112908: RNCC: 3 | RNVC: 2

8 Dec 2006

3040-01-546-2087
Straight Shaft Assembly

015462087
246-5949: RNCC: 3 | RNVC: 2

11 Dec 2006

3040-01-547-7960
Aircraft Fork Assy

015477960
42555-274: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-548-6129
Flexible Shafting

015486129
57353-14: RNCC: 3 | RNVC: 2

28 Feb 2007

3040-01-548-7185
Straight Shaft Assembly

015487185
12270483: RNCC: 3 | RNVC: 2

2 Mar 2007

3040-01-548-7223
Horizo Assy Sheave

015487223
F063153: RNCC: 3 | RNVC: 2
F059593 IT 2: RNCC: 5 | RNVC: 2

2 Mar 2007

3040-01-549-1874
Worm Wheel Gearshaft

015491874
CL40FRSBML-E: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-551-2279
Rigid Connecting Link

015512279
74A182200-1006: RNCC: 3 | RNVC: 2
74A182200-1004: RNCC: E | RNVC: 8

10 May 2007

3040-01-550-3859
Breather

015503859
P562492: RNCC: 3 | RNVC: 2
P562-492: RNCC: 5 | RNVC: 9
RPS-40-5-N12: RNCC: 5 | RNVC: 9
802027299963-1: RNCC: C | RNVC: 1

18 Apr 2007

3040-01-551-9381
Control Cable Assembly

015519381
D-WK-871-73-ASO: RNCC: 3 | RNVC: 2
H-WK-871-8 PC5: RNCC: 5 | RNVC: 2

31 May 2007

3040-01-552-0085
Counterbalance Weight

015520085
38150-09424-102: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-552-1137
Mechanical Drive Housing Part

015521137
190300: RNCC: 3 | RNVC: 2
190300: RNCC: 3 | RNVC: 9

6 Jun 2007

3040-01-552-1765
Nonrotating Shaft Eye Bracket

015521765
5HB334: RNCC: 3 | RNVC: 2
5151-120: RNCC: 5 | RNVC: 2
5HB334: RNCC: 5 | RNVC: 9

7 Jun 2007

3040-01-552-1740
Shaft Retaining Plate

015521740
D-WK-871-38 PC7: RNCC: 3 | RNVC: 2
H-WK-871-3 PC13: RNCC: 5 | RNVC: 1
D-WK-871-29 PC13: RNCC: 5 | RNVC: 2

7 Jun 2007

3040-01-552-2725
Rigid Connecting Link

015522725
70400-02125-046: RNCC: 3 | RNVC: 2

9 Jun 2007

3040-01-558-2017
Mechanical Drive Housing

015582017
3657160: RNCC: 3 | RNVC: 2
3657160: RNCC: 5 | RNVC: 9

2 Nov 2007

3040-01-553-9001
Linear Actuating Cylinder Assembly

015539001
19550312: RNCC: 3 | RNVC: 2
19550312: RNCC: 5 | RNVC: 2
19550312: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-0947
Pneumatic Actuator Cylinder Housing

015540947
27052512: RNCC: 3 | RNVC: 2
27052512: RNCC: 5 | RNVC: 9

30 Jul 2007

3040-01-559-3971
Shouldered Shaft

015593971
TX70-ATS ITEM 16: RNCC: 3 | RNVC: 2
TX70-ATS ITEM 16: RNCC: 3 | RNVC: 9

17 Dec 2007

3040-01-559-8322
Spur Gearshaft

015598322
16211210-20: RNCC: 3 | RNVC: 2
16211210-20: RNCC: 3 | RNVC: 9
16211210 ITEM 6: RNCC: 5 | RNVC: 1

8 Jan 2008

3040-01-554-7197
Differential Gear Unit

015547197
12112-1503: RNCC: 3 | RNVC: 2
7291745 ITEM 3: RNCC: 5 | RNVC: 2

17 Aug 2007

3040-01-554-5425
Mounting Coupling

015545425
PAAI006876: RNCC: 3 | RNVC: 2

14 Aug 2007

3040-01-554-8861
Module Pinion

015548861
RI150Z12B38: RNCC: 3 | RNVC: 2
K77 ITEM17: RNCC: 5 | RNVC: 2

22 Aug 2007

3040-01-555-4496
Rigid Connecting Link

015554496
901-301-022-113: RNCC: 3 | RNVC: 2
USCTR-001-113: RNCC: 5 | RNVC: 2
901-301-023-113: RNCC: E | RNVC: 8

6 Sep 2007

3040-01-555-4497
Rigid Connecting Link

015554497
901-301-022-125: RNCC: 1 | RNVC: 2
USCTR-001-125: RNCC: 3 | RNVC: 2

6 Sep 2007

3040-01-562-0968
Linear Actuating Cylinder Assembly Parts Kit

015620968
3J16889: RNCC: 3 | RNVC: 2

28 Mar 2008

3040-01-555-9929
Flexible Drive Shaft

015559929
820201-1: RNCC: 3 | RNVC: 9
906010-5-1PL FIND NO 23: RNCC: 5 | RNVC: 9
820201-1: RNCC: C | RNVC: 1
906010-5-1PL FIND NO 23: RNCC: C | RNVC: 1

20 Sep 2007

3040-01-556-7265
Linear Actuating Cylinder Assembly

015567265
AMD-1721: RNCC: 3 | RNVC: 2

4 Oct 2007

3040-01-557-2749
Shouldered Shaft

015572749
DBA007: RNCC: 3 | RNVC: 2

17 Oct 2007

3040-01-557-0732
Shouldered Shaft

015570732
08686-01: RNCC: 3 | RNVC: 2
10004176: RNCC: 5 | RNVC: 2
0868601: RNCC: 5 | RNVC: 2

11 Oct 2007

3040-01-564-0285
Rigid Connecting Link

015640285
B-090106X16-HISB: RNCC: 3 | RNVC: 2
803-6397269 PC 17 MOD: RNCC: 5 | RNVC: 2

3 Jun 2008

3040-01-564-0366
Nonaircraft Mechanical Actuator

015640366
3683201C91: RNCC: 3 | RNVC: 2
3683201C91L: RNCC: 5 | RNVC: 9

3 Jun 2008

3040-01-564-2103
Shoe Type Brake

015642103
3596013: RNCC: 1 | RNVC: 2
K027788: RNCC: 3 | RNVC: 2
331227: RNCC: 5 | RNVC: 9
3596013: RNCC: 5 | RNVC: 9

9 Jun 2008

3040-01-564-3125
Counterbalance Weight

015643125
P70072-3C: RNCC: 3 | RNVC: 2

11 Jun 2008

3040-01-564-6081
Bell Crank

015646081
60-30-0001: RNCC: 3 | RNVC: 9
60-30-0001: RNCC: 5 | RNVC: 2

23 Jun 2008

3040-01-564-9707
Shouldered Shaft

015649707
25-65-0001: RNCC: 3 | RNVC: 2
25-65-0001: RNCC: 3 | RNVC: 9

7 Jul 2008

3040-01-565-9646
Shouldered Shaft

015659646
3553706: RNCC: 3 | RNVC: 2
3553706: RNCC: 5 | RNVC: 9

14 Aug 2008

3040-01-565-2040
Traversing Shaft

015652040
13017440: RNCC: 3 | RNVC: 2

15 Jul 2008

3040-01-565-8939
Pawl

015658939
7N-0914: RNCC: 3 | RNVC: 2

12 Aug 2008

3040-01-566-9784
Transfer To I Shaft

015669784
0928-PP2-235: RNCC: 3 | RNVC: 2

15 Sep 2008

3040-01-566-8691
Shouldered Shaft

015668691
7251582: RNCC: 3 | RNVC: 2

12 Sep 2008

3040-01-566-9685
Rigid Connecting Link

015669685
4294423: RNCC: 3 | RNVC: 2
4294423: RNCC: 5 | RNVC: 2

15 Sep 2008

3040-01-567-3548
Push-Pull Control Assembly

015673548
UFLMC0X32: RNCC: 3 | RNVC: 9
216-MC0X32: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-567-7196
Cylinderzhydraulicz

015677196
P03704: RNCC: 3 | RNVC: 2
MWW: RNCC: 3 | RNVC: 2
E108130 FIND 114: RNCC: 5 | RNVC: 2
CDT4MP1/2.00/1.00/1.50Z1X/S22HHU: RNCC: 5 | RNVC: 9

3 Oct 2008

3040-01-568-5036
Mechanical Drive Housing

015685036
13018032: RNCC: 3 | RNVC: 2

31 Oct 2008

3040-01-568-5212
Counter-Weight

015685212
12505310: RNCC: 3 | RNVC: 2
12505310: RNCC: 5 | RNVC: 2

3 Nov 2008

3040-01-569-0268
Spline Adapter

015690268
AT300740: RNCC: 3 | RNVC: 2

18 Nov 2008

3040-01-569-0222
Mechanical Drive Housing

015690222
5400-999-000: RNCC: 3 | RNVC: 2
5400-1-999-000: RNCC: 3 | RNVC: 9
0511PL FIND NO 5: RNCC: 5 | RNVC: 2

18 Nov 2008

3040-01-570-8485
Rigid Connecting Link

015708485
7512-F: RNCC: 3 | RNVC: 2
87736558: RNCC: 5 | RNVC: 2

15 Jan 2009

3040-01-571-5885
Rigid Connecting Link

015715885
17A5736P04: RNCC: 3 | RNVC: 2
17A5736P04: RNCC: 5 | RNVC: 2

10 Feb 2009

3040-01-572-3117
Hydraulic Control Assembly

015723117
3100106: RNCC: 3 | RNVC: 2

6 Mar 2009

3040-01-572-5779
Belt-Chain Tension Adjusting Device

015725779
101339-3: RNCC: 3 | RNVC: 2

16 Mar 2009

3040-01-572-9627
Shouldered Shaft

015729627
751-7072805-A1: RNCC: 3 | RNVC: 2
799-7072841-13: RNCC: 5 | RNVC: 1
H821-0841-13: RNCC: 5 | RNVC: 1
H821-0805-A1: RNCC: 5 | RNVC: 2

1 Apr 2009

3040-01-573-4170
Bevel Gear And Shaft Assembly

015734170
41151-ZY6-000: RNCC: 3 | RNVC: 9

22 Apr 2009

3040-01-572-3736
Pivot Shaft Assembly

015723736
1624443: RNCC: 3 | RNVC: 2
154248: RNCC: 5 | RNVC: 9
124914682: RNCC: D | RNVC: 9

10 Mar 2009

3040-01-575-6365
Control Cam

015756365
DDE R23537090: RNCC: 3 | RNVC: 2

10 Jul 2009

3040-01-576-1898
Rigid Connecting Link

015761898
331224: RNCC: 3 | RNVC: 2

23 Jul 2009

3040-01-575-8459
Linear Actuating Cylinder

015758459
GSS6365UG: RNCC: 3 | RNVC: 2

15 Jul 2009

3040-01-575-8983
Swivel Flange

015758983
174394: RNCC: 3 | RNVC: 2
R0093773: RNCC: 5 | RNVC: 2
R0093773: RNCC: 7 | RNVC: 2
R0093773-0301: RNCC: D | RNVC: 9

16 Jul 2009

3040-01-576-4874
Shouldered Shaft

015764874
1B5097-19: RNCC: 3 | RNVC: 2

3 Aug 2009

3040-01-577-7240
Rigid Connecting Link

015777240
RE529237: RNCC: 3 | RNVC: 2

16 Sep 2009

3040-01-577-4857
Nonaircraft Mechanical Actuator

015774857
12505995: RNCC: 1 | RNVC: 2
MIL-16922-23: RNCC: 3 | RNVC: 2
12505995: RNCC: 5 | RNVC: 2
16906-50: RNCC: 5 | RNVC: 9

9 Sep 2009

3040-01-578-0367
Manual Control Lever

015780367
19-0204-12: RNCC: 3 | RNVC: 2
12239: RNCC: D | RNVC: 9

24 Sep 2009

3040-01-578-1185
Mechanically Actuated Spindle

015781185
124-5563773 PC 2: RNCC: 3 | RNVC: 2

28 Sep 2009

3040-01-578-9311
Controllable Swashplate

015789311
P-29L42176R: RNCC: 3 | RNVC: 2
P-29L42176R: RNCC: 5 | RNVC: 2

26 Oct 2009

3040-01-582-3825
Rigid Connecting Link

015823825
13993: RNCC: 3 | RNVC: 2

18 Feb 2010

3040-01-583-0168
Manual Control Lever

015830168
42675C208-8: RNCC: 3 | RNVC: 2

11 Mar 2010

3040-01-582-3394
Cam Detent

015823394
4977170-2: RNCC: 3 | RNVC: 2
4977170-2: RNCC: 5 | RNVC: 2
4977170-0002: RNCC: 5 | RNVC: 2

17 Feb 2010

3040-01-583-8204
Pivot Shaft Assembly

015838204
22KP129: RNCC: 3 | RNVC: 2
12508453: RNCC: 5 | RNVC: 2
22KP129: RNCC: 5 | RNVC: 9
12508453: RNCC: 5 | RNVC: 9

7 Apr 2010

3040-01-583-8763
Shouldered Shaft

015838763
PD44500PCBC: RNCC: 3 | RNVC: 2

9 Apr 2010

3040-01-583-9472
Ramp Connection Rld Tenon

015839472
891-22455: RNCC: 3 | RNVC: 2

13 Apr 2010

3040-01-585-2205
Male Coupler

015852205
2307625W: RNCC: 3 | RNVC: 2

19 May 2010

3040-01-584-9061
Shaft Retaining Plate

015849061
60244-40936: RNCC: 3 | RNVC: 2

11 May 2010

3040-01-585-2000
Piston Rod Ring

015852000
200413558-01: RNCC: 1 | RNVC: 2
220FTE-160-4567: RNCC: 3 | RNVC: 2

19 May 2010

3040-01-587-3736
Pawl Guide

015873736
19KP738: RNCC: 1 | RNVC: 2
2297U4597: RNCC: 3 | RNVC: 2

4 Aug 2010

3040-01-584-2715
Shouldered Shaft

015842715
214-040-622-109: RNCC: 3 | RNVC: 2

21 Apr 2010

3040-01-585-7956
Shouldered Shaft

015857956
35-79501-2242-3: RNCC: 3 | RNVC: 2

7 Jun 2010

3040-01-588-4167
Shouldered Shaft

015884167
41010938: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-588-2265
Friction Lining

015882265
71750-22203-117: RNCC: 3 | RNVC: 2

8 Sep 2010

3040-01-589-5259
Rigid Connecting Link

015895259
4088863: RNCC: 3 | RNVC: 2
4088863: RNCC: 5 | RNVC: 2

29 Oct 2010

3040-01-590-2406
Straight Shaft

015902406
OXP6X290: RNCC: 3 | RNVC: 2
1SCA022042R6370: RNCC: 5 | RNVC: 1
1SCA022042R6370: RNCC: 5 | RNVC: 2
31L25403: RNCC: 5 | RNVC: 2
P-041605: RNCC: 5 | RNVC: 2
40082550: RNCC: 5 | RNVC: 2
40090833: RNCC: 5 | RNVC: 2
40108110: RNCC: 5 | RNVC: 2
OXP6*290: RNCC: 5 | RNVC: 2
24087-320-0220 PC 1 PN/OXP6X290: RNCC: 5 | RNVC: 2

24 Nov 2010

3040-01-591-1762
Shaft Collar

015911762
R190,706: RNCC: 3 | RNVC: 9
R190,706: RNCC: 5 | RNVC: 2

13 Jan 2011

3040-01-592-7875
Rigid Connecting Link

015927875
3922AS170-3: RNCC: 3 | RNVC: 2

21 Mar 2011

3040-01-594-7484
Shouldered Shaft

015947484
2532996105: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-595-4564
Shouldered Shaft

015954564
GTEET0002: RNCC: 3 | RNVC: 2

27 Apr 2011

3040-01-598-3997
Manual Control Lever

015983997
1116000: RNCC: 3 | RNVC: 2
01116000: RNCC: D | RNVC: 9

28 Jul 2011

3040-01-600-2869
Shaft Collar

016002869
10010549: RNCC: 3 | RNVC: 2
6436K75: RNCC: 5 | RNVC: 2
6436K75: RNCC: 5 | RNVC: 2
6436K750: RNCC: 5 | RNVC: 9

21 Nov 2011

3040-01-600-5347
Linear Actuating Cylinder

016005347
MIL-001-1242: RNCC: 3 | RNVC: 2

7 Dec 2011

3040-01-602-1681
Shaft Collar

016021681
300763-5607-0101: RNCC: 3 | RNVC: 2

27 Jan 2012

3040-01-602-4235
Rigid Connecting Link

016024235
18KP888: RNCC: 3 | RNVC: 2
0238040424-00: RNCC: 5 | RNVC: 2
0238040424-00: RNCC: 5 | RNVC: 9
18KP888: RNCC: 5 | RNVC: 9

31 Jan 2012

3040-01-602-8002
Roller Shaft

016028002
53816: RNCC: 3 | RNVC: 2
23KP945: RNCC: 5 | RNVC: 2
23KP945: RNCC: 5 | RNVC: 9

7 Feb 2012

3040-01-602-8003
Roller Shaft

016028003
53940: RNCC: 3 | RNVC: 2

7 Feb 2012

3040-01-604-3977
Spur Gearshaft

016043977
531807-2: RNCC: 3 | RNVC: 2
531807-2: RNCC: 5 | RNVC: 9

4 Apr 2012

3040-01-604-8503
Rotating Shaft Eye Bracket

016048503
347/20722: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-605-3214
Control Cam

016053214
5000531A: RNCC: 3 | RNVC: 2
DD-HB40: RNCC: 5 | RNVC: 9

18 Apr 2012

3040-01-605-4541
Pivot Shaft Assembly

016054541
347/00140: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-607-0061
Breather

016070061
0704.118: RNCC: 3 | RNVC: 2

29 May 2012

3040-01-607-1096
Piston Ring

016071096
R8506128-SP102: RNCC: 3 | RNVC: 2
R8506128-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-526-5216
Nonrotating Shaft Eye Bracket

015265216
CH47317: RNCC: 3 | RNVC: 2
CH47317: RNCC: 3 | RNVC: 9
47293: RNCC: 5 | RNVC: 9

21 Dec 2004

3040-01-525-5081
Rigid Connecting Link

015255081
3480191: RNCC: 1 | RNVC: 2
90554832: RNCC: 3 | RNVC: 2
3480191: RNCC: 5 | RNVC: 9

12 Nov 2004

3040-01-527-7473
Rigid Connecting Link

015277473
11581494: RNCC: 3 | RNVC: 2

16 Feb 2005

3040-01-529-2470
Pawl

015292470
123LM50032-13: RNCC: 3 | RNVC: 9
123LM50032-13: RNCC: 5 | RNVC: 2
123LM50032-13: RNCC: 5 | RNVC: 2
123LM50032-13: RNCC: 5 | RNVC: 2
123LM50032-13: RNCC: 5 | RNVC: 9
123LM50032-13: RNCC: C | RNVC: 1
123LM50032: RNCC: D | RNVC: 9

11 Apr 2005

3040-01-529-5041
En Actuator Linkage

015295041
17-2-0531-1: RNCC: 3 | RNVC: 2
DYNK-10307: RNCC: 5 | RNVC: 2
DYNK-10307: RNCC: 5 | RNVC: 2

19 Apr 2005

3040-01-529-6767
Linear Actuating Cylinder Piston

015296767
189657A2: RNCC: 3 | RNVC: 2

27 Apr 2005

3040-01-530-9847
Rigid Connecting Link

015309847
123AMM42156-1: RNCC: 3 | RNVC: 2
123AMM42156-1: RNCC: 5 | RNVC: 9
123AMM42156: RNCC: D | RNVC: 9

20 Jun 2005

3040-01-531-3579
Linear Actuating Cylinder Assembly

015313579
04-77039: RNCC: 3 | RNVC: 9
SK-120103: RNCC: 5 | RNVC: 2
YMD-9386: RNCC: 5 | RNVC: 2
YMD-9386: RNCC: 5 | RNVC: 2

6 Jul 2005

3040-01-532-6266
Rigid Connecting Link

015326266
60-2249-6: RNCC: 3 | RNVC: 2

15 Aug 2005

3040-01-534-2953
Rigid Connecting Link

015342953
803-6397269 PC 76 MOD CRES 316: RNCC: 3 | RNVC: 2
803-6397268 PC 102 MOD CRES 316: RNCC: 5 | RNVC: 2

17 Oct 2005

3040-01-536-0909
Shaft Collar

015360909
1C010-2353-0: RNCC: 3 | RNVC: 2

20 Dec 2005

3040-01-535-6414
Manual Control Lever Assembly

015356414
3387693: RNCC: 3 | RNVC: 2
3387693: RNCC: 3 | RNVC: 9
050030008: RNCC: 5 | RNVC: 2

7 Dec 2005

3040-01-538-2108
Shouldered Shaft

015382108
45-888434A 1: RNCC: 3 | RNVC: 2
45-812561A2: RNCC: 5 | RNVC: 2

15 Mar 2006

3040-01-538-9918
Rigid Connecting Link

015389918
4C24012-101B: RNCC: 3 | RNVC: 2

6 Apr 2006

3040-01-539-2839
Rigid Connecting Link

015392839
1627841: RNCC: 3 | RNVC: 2
137440: RNCC: 5 | RNVC: 9
132894: RNCC: D | RNVC: 9

17 Apr 2006

3040-01-540-3731
Remote Control Lever

015403731
0433817: RNCC: 3 | RNVC: 2
0433817: RNCC: 3 | RNVC: 9

17 May 2006

3040-01-540-9562
Straight Shaft

015409562
GTHB-99-17-040-0: RNCC: 3 | RNVC: 2

9 Jun 2006

3040-01-542-4043
Rigid Connecting Link

015424043
12501511: RNCC: 3 | RNVC: 2

3 Aug 2006

3040-01-542-9567
Rigid Connecting Link

015429567
RSC216-46-60D: RNCC: 3 | RNVC: 2
167-7044216 PC 46 MOD: RNCC: 5 | RNVC: 1
167-7044215 PC 53 MOD: RNCC: 5 | RNVC: 1

24 Aug 2006

3040-01-543-6449
Ball Joint

015436449
8702-055-0AA: RNCC: 3 | RNVC: 2

19 Sep 2006

3040-01-543-6682
Ball Joint

015436682
9612-205-00X: RNCC: 3 | RNVC: 2

19 Sep 2006

3040-01-543-7815
Pawl

015437815
B008: RNCC: 3 | RNVC: 2

21 Sep 2006

3040-01-544-0251
Shaft Idler

015440251
HU6H3000IST20-GV: RNCC: 3 | RNVC: 2

28 Sep 2006

3040-01-544-8625
Linear Actuating Cylinder Piston Rod

015448625
590/40696: RNCC: 3 | RNVC: 2

25 Oct 2006

3040-01-547-2676
Shaft Collar

015472676
T001412527: RNCC: 3 | RNVC: 2
T001412527: RNCC: 3 | RNVC: 9
N31002 ITEM NO 25: RNCC: 5 | RNVC: 9

17 Jan 2007

3040-01-547-2682
Manual Control Lever

015472682
029221-2: RNCC: 3 | RNVC: 2

17 Jan 2007

3040-01-547-8149
Aircra Pinion Shaft

015478149
42555-616: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-548-2576
Bevel Gear And Shaft Assembly

015482576
C919-0050: RNCC: 3 | RNVC: 9
919: RNCC: 5 | RNVC: 9

15 Feb 2007

3040-01-548-4244
Mechanical Drive Housing

015484244
1858063C91: RNCC: 3 | RNVC: 2
1841396C1: RNCC: 5 | RNVC: 9

22 Feb 2007

3040-01-548-7205
Rh Knurled Rlr Assy

015487205
F058473: RNCC: 3 | RNVC: 2
F057783 IT 2: RNCC: 5 | RNVC: 2

2 Mar 2007

3040-01-549-2068
Worm Wheel Gearshaft

015492068
CL40FRSBML-C: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-2489
Breather

015492489
NBF-2016: RNCC: 3 | RNVC: 2
185940: RNCC: 5 | RNVC: 2
20809002 FN 50: RNCC: 5 | RNVC: 2

15 Mar 2007

3040-01-549-6151
Remote Control Lever

015496151
RE521050: RNCC: 3 | RNVC: 2
RE521050: RNCC: 5 | RNVC: 9

26 Mar 2007

3040-01-550-6481
Shaft Collar

015506481
412815: RNCC: 3 | RNVC: 2
412815: RNCC: 5 | RNVC: 9

25 Apr 2007

3040-01-550-3441
Linear Actuating Cylinder

015503441
306-9637: RNCC: 3 | RNVC: 2

17 Apr 2007

3040-01-551-2555
Cam Valve

015512555
5405-001: RNCC: 3 | RNVC: 2
9624-0329: RNCC: 5 | RNVC: 2
5HB395: RNCC: 5 | RNVC: 2
5HB395: RNCC: 5 | RNVC: 9

10 May 2007

3040-01-552-0084
Counterbalance Weight

015520084
38150-09424-108: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-551-9360
Control Cable Assembly

015519360
D-WK-871-86 ASSY A: RNCC: 3 | RNVC: 2
F-WK-871-10 PC48: RNCC: 5 | RNVC: 2

31 May 2007

3040-01-552-0083
Counterbalance Weight

015520083
38150-09424-109: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-554-9654
Straight Shaft

015549654
191924: RNCC: 3 | RNVC: 2
20868046: RNCC: 5 | RNVC: 2
20864004 FN17: RNCC: 5 | RNVC: 2

24 Aug 2007

3040-01-555-3813
Shouldered Shaft

015553813
2244418: RNCC: 3 | RNVC: 2

5 Sep 2007

3040-01-555-4501
Rigid Connecting Link

015554501
USCTR-002-119: RNCC: 3 | RNVC: 2
901-301-022-119: RNCC: 3 | RNVC: 2
901-301-023-119: RNCC: E | RNVC: 8

6 Sep 2007

3040-01-555-9336
Rigid Connecting Link

015559336
123C40203-1: RNCC: 3 | RNVC: 2
123C40203-1: RNCC: 3 | RNVC: 9

18 Sep 2007

3040-01-556-7334
Manual Control Lever

015567334
3750AS382-1: RNCC: 3 | RNVC: 2
3221AS652-1: RNCC: 3 | RNVC: 9
3221AS652: RNCC: 5 | RNVC: 9
3750AS382: RNCC: D | RNVC: 9

4 Oct 2007

3040-01-557-5880
Bell Crank

015575880
R0030438: RNCC: 3 | RNVC: 2
R0030438: RNCC: 5 | RNVC: 2
R0030438-0107: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-558-5659
Flexible Drive Shaft

015585659
3758661: RNCC: 3 | RNVC: 2
3758661: RNCC: 5 | RNVC: 9
3555829: RNCC: 5 | RNVC: 9

14 Nov 2007

3040-01-558-7089
Counterbalance Weight

015587089
2116M38P02: RNCC: 3 | RNVC: 2

19 Nov 2007

3040-01-560-1598
Shouldered Shaft

015601598
5405-145-000: RNCC: 3 | RNVC: 2
0509 PL FIND NO 40: RNCC: 5 | RNVC: 2

17 Jan 2008

3040-01-560-3937
Control Cam

015603937
12473307: RNCC: 3 | RNVC: 2

29 Jan 2008

3040-01-561-2646
Linear Actuating Cylinder Assembly

015612646
2935711: RNCC: 3 | RNVC: 2
258-2514: RNCC: 5 | RNVC: 9

28 Feb 2008

3040-01-559-2074
Shouldered Shaft Assembly

015592074
122419: RNCC: 3 | RNVC: 2
2FH340: RNCC: 5 | RNVC: 2
2FH340: RNCC: 5 | RNVC: 9

10 Dec 2007

3040-01-561-5405
Nonrotating Shaft Eye Bracket

015615405
12443636-003: RNCC: 3 | RNVC: 2

10 Mar 2008

3040-01-561-5789
Shouldered Shaft

015615789
00-874635: RNCC: 3 | RNVC: 2

11 Mar 2008

3040-01-563-2536
Linear Actuating Cylinder Assembly

015632536
896500A01: RNCC: 3 | RNVC: 2
896500A01: RNCC: 5 | RNVC: 2
896500A01: RNCC: 5 | RNVC: 2
8M0118141: RNCC: 5 | RNVC: 2

6 May 2008

3040-01-563-2390
Rotary Actuating Cylinder Assembly

015632390
45AB008: RNCC: 3 | RNVC: 2
10024932: RNCC: 5 | RNVC: 2
45AF008: RNCC: 5 | RNVC: 9

6 May 2008

3040-01-563-4900
Straight Shaft

015634900
87011A3200: RNCC: 3 | RNVC: 2
87011A3200: RNCC: 3 | RNVC: 9
87011A3200: RNCC: 5 | RNVC: 2

13 May 2008

3040-01-563-9590
Linear Actuating Cylinder Cap

015639590
03462: RNCC: 3 | RNVC: 2

30 May 2008

3040-01-563-9974
Rigid Connecting Link

015639974
A2-3102-N-3472: RNCC: 3 | RNVC: 2
2597100C91: RNCC: 5 | RNVC: 2
A2310223458: RNCC: 5 | RNVC: 9

2 Jun 2008

3040-01-564-0888
Rigid Connecting Link

015640888
B-090106X14-CR: RNCC: 3 | RNVC: 2
803-6397269 PC 55 MOD: RNCC: 5 | RNVC: 2

4 Jun 2008

3040-01-564-2096
Shoe Type Brake

015642096
3596002: RNCC: 1 | RNVC: 2
K027784: RNCC: 3 | RNVC: 2
331221: RNCC: 5 | RNVC: 9
331221: RNCC: 5 | RNVC: 9
3596002: RNCC: 5 | RNVC: 9

9 Jun 2008

3040-01-564-0356
Nonaircraft Mechanical Actuator

015640356
3683200C91: RNCC: 3 | RNVC: 2
3683200C91L: RNCC: D | RNVC: 9

3 Jun 2008

3040-01-564-4422
Shouldered Shaft Assembly

015644422
158-3416: RNCC: 3 | RNVC: 2
14KP166: RNCC: 5 | RNVC: 2
14KP166: RNCC: 5 | RNVC: 9

17 Jun 2008

3040-01-564-4916
Shouldered Shaft

015644916
112428-1: RNCC: 3 | RNVC: 2

18 Jun 2008

3040-01-564-4001
Counterbalance Weight

015644001
P70072-1C: RNCC: 3 | RNVC: 2
P70071-1C: RNCC: 5 | RNVC: 9

16 Jun 2008

3040-01-564-6375
Housing Adapter

015646375
112484-1: RNCC: 3 | RNVC: 2

23 Jun 2008

3040-01-564-6444
Mechanical Drive Housing Part

015646444
121845: RNCC: 3 | RNVC: 2
1KS281: RNCC: 5 | RNVC: 2
1KS281: RNCC: 5 | RNVC: 9

24 Jun 2008

3040-01-564-6503
Rigid Connecting Link

015646503
14KP514: RNCC: 3 | RNVC: 2
12508466: RNCC: 5 | RNVC: 2
14KP514: RNCC: 5 | RNVC: 9

24 Jun 2008

3040-01-565-5296
Breather

015655296
1214-AA: RNCC: 3 | RNVC: 2

22 Apr 2021

3040-01-565-6402
Pivot Shaft Assembly

015656402
3305AS1249-1: RNCC: 3 | RNVC: 2

31 Jul 2008

3040-01-565-5738
Brake Drum

015655738
1566418: RNCC: 3 | RNVC: 2

30 Jul 2008

3040-01-566-0592
Rigid Connecting Link

015660592
14KP973: RNCC: 3 | RNVC: 2
ML5-22.50: RNCC: 5 | RNVC: 1
ML5-22.50: RNCC: 5 | RNVC: 2
14KP973: RNCC: 5 | RNVC: 9

19 Aug 2008

3040-01-566-1398
Rigid Connecting Link

015661398
LCS2-12033-35S: RNCC: 3 | RNVC: 2
12033-35S: RNCC: 5 | RNVC: 9

21 Aug 2008

3040-01-566-1403
Rigid Connecting Link

015661403
LCS2-12033-35: RNCC: 3 | RNVC: 2
12033-35: RNCC: 5 | RNVC: 9

21 Aug 2008

3040-01-566-3099
Rigid Connecting Link

015663099
87440124: RNCC: 3 | RNVC: 2

27 Aug 2008

3040-01-566-3171
Wheelzassemblyzzzzz

015663171
120660-6: RNCC: 3 | RNVC: 2
38638-1: RNCC: 5 | RNVC: 9
120660-6: RNCC: 5 | RNVC: 9

27 Aug 2008

3040-01-567-0733
Rigid Connecting Link

015670733
3681760C1: RNCC: 3 | RNVC: 2
3681760C1L: RNCC: 5 | RNVC: 9

17 Sep 2008

3040-01-567-1326
Counterbalance Weight

015671326
T237652: RNCC: 3 | RNVC: 2

18 Sep 2008

3040-01-567-3373
Shouldered Shaft

015673373
87533223: RNCC: 3 | RNVC: 2

24 Sep 2008

3040-01-567-8301
Shouldered Shaft

015678301
803-6397269 PC 84 MOD 316 SST: RNCC: 3 | RNVC: 2

8 Oct 2008

3040-01-569-0224
Hydraulic Control Assembly

015690224
1731-999-000: RNCC: 3 | RNVC: 2
0511PL FIND NO 3: RNCC: 5 | RNVC: 2

18 Nov 2008

3040-01-570-0706
Pneumatic Actuator Cylinder Housing

015700706
A203ARM86: RNCC: 3 | RNVC: 2

16 Dec 2008

3040-01-571-3277
Linear Actuating Cylinder Assembly

015713277
1384812: RNCC: 3 | RNVC: 2
R0089588: RNCC: 5 | RNVC: 2
163473: RNCC: 5 | RNVC: 9
DNC-100-250-PPV-A 163473: RNCC: 5 | RNVC: 9
163473: RNCC: 5 | RNVC: 9
1384812: RNCC: 5 | RNVC: 9
R0089588: RNCC: 7 | RNVC: 2
R0089588-0301: RNCC: D | RNVC: 9

30 Jan 2009

3040-01-571-8960
Counterbalance Weight

015718960
064-51451-000: RNCC: 3 | RNVC: 2
364-51227-000 ITEM 36: RNCC: 5 | RNVC: 2

20 Feb 2009

3040-01-571-8900
Bevel Gearshaft

015718900
B411001390: RNCC: 3 | RNVC: 2
A-41631K2: RNCC: 5 | RNVC: 9

20 Feb 2009

3040-01-573-0807
Shaft Collar

015730807
064-46761-000: RNCC: 3 | RNVC: 2
064-46761B: RNCC: 5 | RNVC: 9

7 Apr 2009

3040-01-573-0923
Planetary Gears Carrier

015730923
29545240: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-1069
Counterbalance Weight

015731069
23071999-3: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-1078
Counterbalance Weight

015731078
23071999-6: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-9846
Straight Shaft

015739846
111570001: RNCC: 3 | RNVC: 2
111570001: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-575-5700
Rigid Connecting Link

015755700
A05-27896-000: RNCC: 3 | RNVC: 2

7 Jul 2009

3040-01-575-6367
Control Cam

015756367
DDE R23537091: RNCC: 3 | RNVC: 2

10 Jul 2009

3040-01-575-6026
Transmission Fluid Cooler

015756026
TDC 15448: RNCC: 3 | RNVC: 2

8 Jul 2009

3040-01-575-7663
Rigid Connecting Link

015757663
16-15069-001: RNCC: 3 | RNVC: 2
16-15069: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-576-8664
Manual Control Lever Assembly

015768664
B3437-583: RNCC: 3 | RNVC: 9
B3437-583: RNCC: 5 | RNVC: 2
D50-0019 ITEM 26: RNCC: 5 | RNVC: 2
D50-0019 ITEM 26: RNCC: 5 | RNVC: 9

18 Aug 2009

3040-01-578-1331
Rigid Connecting Link

015781331
351217: RNCC: 3 | RNVC: 2
0351217: RNCC: 5 | RNVC: 2

28 Sep 2009

3040-01-578-9632
Nonaircraft Mechanical Actuator

015789632
6442704-01M1: RNCC: 3 | RNVC: 9
6442704-01M1: RNCC: 5 | RNVC: 2
6442704-01M1: RNCC: C | RNVC: 1

27 Oct 2009

3040-01-579-4868
Rigid Connecting Link

015794868
0351218: RNCC: 3 | RNVC: 2
ZB0351218: RNCC: 5 | RNVC: 2

13 Nov 2009

3040-01-579-8463
Rigid Connecting Link

015798463
12509494: RNCC: 3 | RNVC: 2

25 Nov 2009

3040-01-579-8900
Nonrotating Shaft Eye Bracket

015798900
3606937: RNCC: 3 | RNVC: 2
2333226: RNCC: 5 | RNVC: 9

27 Nov 2009

3040-01-579-9079
Rigid Connecting Link

015799079
12506078: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-580-2025
Flexible Shaft Assembly

015802025
GTC-702-17: RNCC: 3 | RNVC: 2

8 Dec 2009

3040-01-580-5788
Linear Actuating Cylinder Assembly Parts Kit

015805788
RK2HLTS201: RNCC: 3 | RNVC: 2

17 Dec 2009

3040-01-581-1615
Rigid Connecting Link

015811615
74A661153-1001: RNCC: 3 | RNVC: 2

7 Jan 2010

3040-01-581-9032
Rotary Actuating Cylinder Assembly

015819032
35316611: RNCC: 3 | RNVC: 2

1 Feb 2010

3040-01-582-4879
Hub Clamp

015824879
4977220-1: RNCC: 3 | RNVC: 2
4977220-0001: RNCC: 5 | RNVC: 2

23 Feb 2010

3040-01-584-0100
Shaft Collar

015840100
6436K41: RNCC: 3 | RNVC: 2

14 Apr 2010

3040-01-585-4423
Inertia Damper

015854423
RE505939: RNCC: 3 | RNVC: 2

26 May 2010

3040-01-585-6622
Piston Rod Guide

015856622
1003-04-D FIND NO. 19: RNCC: 3 | RNVC: 2
18-006-022: RNCC: 3 | RNVC: 2

2 Jun 2010

3040-01-586-2129
Shouldered Shaft

015862129
30295-1037: RNCC: 3 | RNVC: 2
40001207-01: RNCC: 5 | RNVC: 2
30295-1037: RNCC: 5 | RNVC: 9

18 Jun 2010

3040-01-587-3293
Remote Control Lever

015873293
3837885C1: RNCC: 3 | RNVC: 2
3837885C1L: RNCC: 5 | RNVC: 9

3 Aug 2010

3040-01-588-3183
Shouldered Shaft

015883183
41010959-210: RNCC: 3 | RNVC: 2

13 Sep 2010

3040-01-588-3837
Rigid Connecting Link

015883837
791HN113-1: RNCC: 3 | RNVC: 2

15 Sep 2010

3040-01-588-4183
Shouldered Shaft

015884183
41010959-190: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-587-9279
Axle Vent Line Kit

015879279
3891693C91: RNCC: 3 | RNVC: 2

26 Aug 2010

3040-01-588-5084
Straight Shaft

015885084
5023022-101: RNCC: 3 | RNVC: 2
5023022-101: RNCC: 5 | RNVC: 9
5992015: RNCC: D | RNVC: 9

22 Sep 2010

3040-01-589-4908
Rigid Connecting Link

015894908
3671240C01003-5: RNCC: 3 | RNVC: 2
3671240C01003-5: RNCC: 3 | RNVC: 9

27 Oct 2010

3040-01-589-6374
Rigid Connecting Link

015896374
3902294: RNCC: 3 | RNVC: 2
3902294: RNCC: 5 | RNVC: 9

1 Nov 2010

3040-01-589-4394
Rigid Connecting Link

015894394
4088864: RNCC: 3 | RNVC: 2
4088864: RNCC: 5 | RNVC: 2

26 Oct 2010

3040-01-590-8400
Rigid Connecting Link

015908400
6-51857-10: RNCC: 3 | RNVC: 2

27 Dec 2010

3040-01-592-1345
Nonaircraft Mechanical Actuator

015921345
13046620: RNCC: 3 | RNVC: 2
205620: RNCC: 5 | RNVC: 2

22 Feb 2011

3040-01-593-5529
Flexible Drive Shaft

015935529
177K412G01: RNCC: 3 | RNVC: 2

11 Apr 2011

3040-01-593-2075
Rigid Connecting Link

015932075
1590M22P04: RNCC: 3 | RNVC: 2

5 Apr 2011

3040-01-595-6184
Linear Actuating Cylinder Piston

015956184
1137703: RNCC: 3 | RNVC: 2

3 May 2011

3040-01-596-0691
Helical Gear And Shaft Assembly

015960691
3834665: RNCC: 3 | RNVC: 2
3834665: RNCC: 5 | RNVC: 9

11 May 2011

3040-01-597-1004
Manual Control Lever

015971004
64A114C80-8: RNCC: 3 | RNVC: 2
DVMHULCS FIND #34: RNCC: 5 | RNVC: 2

26 May 2011

3040-01-597-9055
Rigid Connecting Link

015979055
5129T56P01: RNCC: 3 | RNVC: 2

22 Jun 2011

3040-01-598-2049
Housing Adapter

015982049
13046409: RNCC: 3 | RNVC: 2
205409: RNCC: 5 | RNVC: 2

11 Jul 2011

3040-01-597-6016
Transmission Fluid Cooler

015976016
1436.010.0000: RNCC: 3 | RNVC: 2

16 Jun 2011

3040-01-598-4547
Straight Shaft

015984547
12285123: RNCC: 3 | RNVC: 2

3 Aug 2011

3040-01-600-3338
Shaft Retaining Plate

016003338
0225-07078: RNCC: 3 | RNVC: 2
27KP936: RNCC: 5 | RNVC: 2
27KP936: RNCC: 5 | RNVC: 9

23 Nov 2011

3040-01-601-0863
Shouldered Shaft

016010863
29542205: RNCC: 3 | RNVC: 2
16KP970: RNCC: 5 | RNVC: 2
16KP970: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-2341
Main Bellcrank Nrp

016012341
5129T54G01: RNCC: 3 | RNVC: 2

13 Jan 2012

3040-01-601-1021
Mechanical Drive Housing

016011021
6456K18: RNCC: 3 | RNVC: 2

5 Jan 2012

3040-01-603-1324
Rigid Connecting Link

016031324
A18-64951-000: RNCC: 3 | RNVC: 2

23 Feb 2012

3040-01-603-7181
Nonaircraft Mechanical Actuator

016037181
2000-40089-33: RNCC: 3 | RNVC: 2

12 Mar 2012

3040-01-604-2799
Shouldered Shaft

016042799
41112-ZY3-611: RNCC: 3 | RNVC: 9

2 Apr 2012

3040-01-605-6507
Mechanical Drive Housing

016056507
8M0056631: RNCC: 3 | RNVC: 2
880687T01: RNCC: 5 | RNVC: 9

23 Apr 2012

3040-01-605-9798
Pivot Shaft Assembly

016059798
53377: RNCC: 3 | RNVC: 2
26KP447: RNCC: 5 | RNVC: 2
26KP447: RNCC: 5 | RNVC: 9

2 May 2012

3040-01-606-7546
Flexible Casing End Fitting

016067546
M3807: RNCC: 3 | RNVC: 2
19684PC5: RNCC: 5 | RNVC: 2

23 May 2012

3040-01-607-1041
Manual Control Lever Assembly

016071041
220142: RNCC: 3 | RNVC: 2

31 May 2012

3040-01-607-1090
Piston Ring

016071090
R8505644-SP102: RNCC: 3 | RNVC: 2
R8505644-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-607-7534
Shaft Collar

016077534
7-511315439-001: RNCC: 3 | RNVC: 2

13 Jun 2012

3040-01-545-0196
Ball Joint

015450196
9612-204-009: RNCC: 3 | RNVC: 2

30 Oct 2006

3040-01-543-6749
Shouldered Shaft

015436749
8978-036-00Y: RNCC: 3 | RNVC: 2

19 Sep 2006

3040-01-545-1412
Shouldered Shaft

015451412
29542515: RNCC: 3 | RNVC: 2
29542515: RNCC: 5 | RNVC: 2
17KP483: RNCC: 5 | RNVC: 2
17KP483: RNCC: 5 | RNVC: 9

2 Nov 2006

3040-01-546-1727
Shaft Collar

015461727
104843: RNCC: 3 | RNVC: 2

7 Dec 2006

3040-01-546-2017
Linear Actuating Cylinder Cap

015462017
332/G1002: RNCC: 3 | RNVC: 2
594/14268: RNCC: 5 | RNVC: 9

8 Dec 2006

3040-01-546-4363
Linear Actuating Cylinder Piston Rod

015464363
590/40665: RNCC: 3 | RNVC: 2

15 Dec 2006

3040-01-527-9804
Shouldered Shaft

015279804
9-24871-1: RNCC: 3 | RNVC: 2

28 Feb 2005

3040-01-528-5864
Multiple Gears Gearshaft

015285864
5001T56P05: RNCC: 3 | RNVC: 2
5001T56P04: RNCC: 5 | RNVC: 9
5001T56: RNCC: D | RNVC: 9

18 Mar 2005

3040-01-529-3341
Piston Ring Set

015293341
960145-94: RNCC: 3 | RNVC: 2

13 Apr 2005

3040-01-529-6327
Flexible Shaft Assembly

015296327
8229-103: RNCC: 3 | RNVC: 2
13213264: RNCC: 7 | RNVC: 2

25 Apr 2005

3040-01-530-1214
Linear Actuating Cylinder Assembly

015301214
HC5318: RNCC: 3 | RNVC: 2

16 May 2005

3040-01-531-0823
Counterbalance Weight

015310823
9127M56P02: RNCC: 3 | RNVC: 2

21 Jun 2005

3040-01-531-0887
Rigid Connecting Link

015310887
IM-FFG-D-004: RNCC: 3 | RNVC: 2

22 Jun 2005

3040-01-531-6706
Rigid Connecting Link

015316706
113315-1: RNCC: 3 | RNVC: 2

19 Jul 2005

3040-01-531-9923
Shouldered Shaft

015319923
21141-1000-1: RNCC: 3 | RNVC: 2
21141 FIND 8: RNCC: 5 | RNVC: 1

25 Jul 2005

3040-01-534-6225
Shouldered Shaft

015346225
100-31-SP211: RNCC: 3 | RNVC: 2
1003DH-S0801211 ITEM NO. 3: RNCC: 5 | RNVC: 2

27 Oct 2005

3040-01-534-9752
Shouldered Shaft

015349752
204-7519: RNCC: 3 | RNVC: 2

9 Nov 2005

3040-01-534-9761
Linear Actuating Cylinder Assembly Parts Kit

015349761
HS5176: RNCC: 3 | RNVC: 9

9 Nov 2005

3040-01-535-3679
Spur Gearshaft

015353679
915118: RNCC: 3 | RNVC: 2
E-3548 ITEM NO. 102 (28 TOOTH): RNCC: 5 | RNVC: 2

28 Nov 2005

3040-01-535-9490
Flexible Drive Shaft

015359490
593-6960591 PC 1: RNCC: 3 | RNVC: 2
M696059101: RNCC: 5 | RNVC: 2
M646059101: RNCC: 5 | RNVC: 9

15 Dec 2005

3040-01-538-4743
Rigid Connecting Link

015384743
1629322: RNCC: 3 | RNVC: 2
1622759: RNCC: 5 | RNVC: 9
137441: RNCC: 5 | RNVC: 9
132895: RNCC: D | RNVC: 9

23 Mar 2006

3040-01-539-2024
Straight Shaft

015392024
0311-961281: RNCC: 3 | RNVC: 2

13 Apr 2006

3040-01-539-6291
Spur Gearshaft

015396291
167-7066800-49: RNCC: 3 | RNVC: 2
H547-1803-49: RNCC: 5 | RNVC: 2

27 Apr 2006

3040-01-540-3505
Remote Control Lever

015403505
0436902: RNCC: 3 | RNVC: 9
0436902: RNCC: 5 | RNVC: 2

16 May 2006

3040-01-540-8184
Rigid Connecting Link

015408184
1071018: RNCC: 3 | RNVC: 2

5 Jun 2006

3040-01-541-4297
Stub Shaft Toe Guard

015414297
005399: RNCC: 3 | RNVC: 2

27 Jun 2006

3040-01-541-6777
Straight Shaft

015416777
006-2005035-07-508: RNCC: 3 | RNVC: 2
999-246B-0-05 REV E ITEM 6: RNCC: 5 | RNVC: 2

6 Jul 2006

3040-01-541-8769
Ball Joint

015418769
006737: RNCC: 3 | RNVC: 2

14 Jul 2006

3040-01-542-8078
Piston Ring

015428078
736C-10009: RNCC: 3 | RNVC: 2
P-1016-04: RNCC: 5 | RNVC: 9

18 Aug 2006

3040-01-544-5192
Rigid Connecting Link

015445192
2266577: RNCC: 3 | RNVC: 2

16 Oct 2006

3040-01-547-2995
Shaft Retaining Plate

015472995
9238551305: RNCC: 3 | RNVC: 2
923855.1305: RNCC: 5 | RNVC: 2

17 Jan 2007

3040-01-547-5313
Shaft Retaining Plate

015475313
297KB117BP2: RNCC: 3 | RNVC: 2
10026208: RNCC: 5 | RNVC: 2

24 Jan 2007

3040-01-547-7986
Aircraf Brake Shaft

015477986
42555-211: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-548-0981
Rigid Connecting Link

015480981
12480850: RNCC: 3 | RNVC: 2
6016446: RNCC: 5 | RNVC: 9

8 Feb 2007

3040-01-548-3713
Linear Actuating Cylinder Assembly

015483713
113133A2: RNCC: 3 | RNVC: 2

21 Feb 2007

3040-01-548-6147
Flexible Shafting

015486147
57353-42: RNCC: 3 | RNVC: 2

28 Feb 2007

3040-01-548-7219
Linear Actuating Cylinder Piston

015487219
311109A1: RNCC: 3 | RNVC: 2
3832AS230-12: RNCC: 5 | RNVC: 2

2 Mar 2007

3040-01-548-7421
Linear Actuating Cylinder Cap

015487421
1542914C1: RNCC: 3 | RNVC: 2

2 Mar 2007

3040-01-549-3596
Linear Actuating Cylinder Assembly

015493596
305499A1: RNCC: 3 | RNVC: 2

19 Mar 2007

3040-01-550-0397
Port And Poppet Assembly

015500397
L074350002: RNCC: 3 | RNVC: 2
BA005X364 IT 9: RNCC: 5 | RNVC: 2

5 Apr 2007

3040-01-549-0898
Spur Gearshaft

015490898
9-62459: RNCC: 3 | RNVC: 2

12 Mar 2007

3040-01-550-6259
Shouldered Shaft

015506259
FD0013T: RNCC: 3 | RNVC: 2
F8199-000152: RNCC: 6 | RNVC: 9

24 Apr 2007

3040-01-549-5262
Shaft Collar

015495262
39041-1: RNCC: 3 | RNVC: 2

22 Mar 2007

3040-01-552-7792
Rotating Shaft Eye Bracket

015527792
R0060601: RNCC: 3 | RNVC: 2
R0060601: RNCC: 5 | RNVC: 2

25 Jun 2007

3040-01-553-6874
Rigid Connecting Link

015536874
6702904: RNCC: 3 | RNVC: 2
6702904: RNCC: 5 | RNVC: 2

23 Jul 2007

3040-01-553-9831
Housing Adapter

015539831
63439340: RNCC: 3 | RNVC: 2
63439340: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-0328
Rigid Connecting Link

015540328
47071712: RNCC: 3 | RNVC: 2
47071712: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-555-0893
Control Cam

015550893
61A-SM2557-001: RNCC: 3 | RNVC: 2
61A-SM2557-001: RNCC: 5 | RNVC: 2

29 Aug 2007

3040-01-555-6746
Shouldered Shaft Assembly

015556746
191919: RNCC: 3 | RNVC: 2
20864041: RNCC: 5 | RNVC: 2
20864007 FN8: RNCC: 5 | RNVC: 2
20864007: RNCC: D | RNVC: 9

11 Sep 2007

3040-01-556-2828
Worm Shaft

015562828
13017160: RNCC: 3 | RNVC: 2

29 Sep 2007

3040-01-556-6976
Rigid Connecting Link

015566976
74A672404-1003: RNCC: 3 | RNVC: 2

4 Oct 2007

3040-01-557-4320
Mechanical Drive Housing

015574320
3211885: RNCC: 3 | RNVC: 2
3211885: RNCC: 5 | RNVC: 9

23 Oct 2007

3040-01-557-6133
Mechanical Steering Actuator

015576133
R0065939: RNCC: 3 | RNVC: 2
R0065939: RNCC: 5 | RNVC: 2
R0065939-0102: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-558-5516
Belt-Chain Tension Adjusting Device

015585516
3976834: RNCC: 3 | RNVC: 2
02/912216: RNCC: 5 | RNVC: 2
3976834: RNCC: 5 | RNVC: 2
3976834: RNCC: 5 | RNVC: 2
A045Z985: RNCC: 5 | RNVC: 2
3976834: RNCC: 5 | RNVC: 9

14 Nov 2007

3040-01-558-6886
Straight Shaft Assembly

015586886
201198: RNCC: 3 | RNVC: 2

19 Nov 2007

3040-01-558-6811
Counterbalance Weight

015586811
2116M38P01: RNCC: 3 | RNVC: 2

19 Nov 2007

3040-01-558-9856
Rotating Shaft Eye Bracket

015589856
3115496: RNCC: 3 | RNVC: 2
3115496: RNCC: 5 | RNVC: 9

3 Dec 2007

3040-01-558-7625
Nonaircraft Mechanical Actuator

015587625
010-9238: RNCC: 3 | RNVC: 2

21 Nov 2007

3040-01-559-8282
Fix Insert

015598282
802011213908-1: RNCC: 3 | RNVC: 2

8 Jan 2008

3040-01-560-1591
Shouldered Shaft

015601591
5614/2-151-000: RNCC: 3 | RNVC: 2
0509 PL FIND NO 36: RNCC: 5 | RNVC: 2

17 Jan 2008

3040-01-560-1594
Shouldered Shaft

015601594
5407-188-000: RNCC: 3 | RNVC: 2
5400 PL FIND NO. 5: RNCC: 5 | RNVC: 2

17 Jan 2008

3040-01-560-9412
Rigid Connecting Link

015609412
A2785-16: RNCC: 3 | RNVC: 2
A2785-16: RNCC: 5 | RNVC: 2
A2785-14: RNCC: 5 | RNVC: 9

20 Feb 2008

3040-01-561-4102
Spur Gearshaft

015614102
12323-188-000: RNCC: 3 | RNVC: 2
12220PL FN 7: RNCC: 5 | RNVC: 2

5 Mar 2008

3040-01-561-6449
Shouldered Shaft

015616449
00-916340: RNCC: 3 | RNVC: 2
00-916340: RNCC: 5 | RNVC: 2

13 Mar 2008

3040-01-562-0611
Linear Actuating Cylinder Assembly Parts Kit

015620611
3J14691: RNCC: 3 | RNVC: 2

27 Mar 2008

3040-01-562-0867
Linear Actuating Cylinder Assembly Parts Kit

015620867
3J15593: RNCC: 3 | RNVC: 2

28 Mar 2008

3040-01-563-8260
Shaft Collar

015638260
8215130: RNCC: 3 | RNVC: 2
8215130: RNCC: 5 | RNVC: 2

23 May 2008

3040-01-563-8654
Rigid Connecting Link

015638654
4286890: RNCC: 3 | RNVC: 2
4286890: RNCC: 5 | RNVC: 2

27 May 2008

3040-01-564-0267
Rigid Connecting Link

015640267
B-090106X16-HAST: RNCC: 3 | RNVC: 2
803-6397269 PC 13 MOD: RNCC: 5 | RNVC: 2

3 Jun 2008

3040-01-564-0335
Linear Actuating Cylinder

015640335
3683186C92: RNCC: 3 | RNVC: 2
3683186C92: RNCC: 5 | RNVC: 2
3683186C91L: RNCC: 5 | RNVC: 9
3683186C91: RNCC: 5 | RNVC: 9

3 Jun 2008

3040-01-564-0940
Rigid Connecting Link

015640940
803-6397268 PC 197: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-564-2533
Rigid Connecting Link

015642533
B-090106X10-CR: RNCC: 3 | RNVC: 2
B-090109X10-CR: RNCC: 3 | RNVC: 2

10 Jun 2008

3040-01-564-8550
Rigid Connecting Link

015648550
55-15-0008: RNCC: 3 | RNVC: 2
55-15-0008: RNCC: 3 | RNVC: 9

30 Jun 2008

3040-01-565-0918
Brake Disc

015650918
13436-061: RNCC: 3 | RNVC: 2
1-056-762-08-001: RNCC: 5 | RNVC: 2

11 Jul 2008

3040-01-565-0761
Controllable Swashplate

015650761
10KP874: RNCC: 3 | RNVC: 2
4997172-001: RNCC: 3 | RNVC: 2
10KP874: RNCC: 5 | RNVC: 9
4997172-001: RNCC: D | RNVC: 9

10 Jul 2008

3040-01-565-0928
Disc Brass Station

015650928
8-003-513-02: RNCC: 3 | RNVC: 2
8-078-906-17 TBL 4 ITEM M4: RNCC: 5 | RNVC: 9

11 Jul 2008

3040-01-565-8358
Straight Shaft Assembly

015658358
6025464: RNCC: 3 | RNVC: 2

8 Aug 2008

3040-01-566-1724
Shouldered Shaft

015661724
3305AS1548-1: RNCC: 3 | RNVC: 2
3305AS1548: RNCC: 5 | RNVC: 2

22 Aug 2008

3040-01-566-1407
Control Cam

015661407
LCS2-120-53S: RNCC: 3 | RNVC: 2
805-1624129 PC 45 MOD CRES: RNCC: 5 | RNVC: 2
120-53S: RNCC: 5 | RNVC: 9

21 Aug 2008

3040-01-566-4544
Bevel Gear And Shaft Assembly

015664544
T294888: RNCC: 3 | RNVC: 2
T173860: RNCC: 5 | RNVC: 9

2 Sep 2008

3040-01-566-4422
Straight Shaft

015664422
3305AS1550-1: RNCC: 3 | RNVC: 2

2 Sep 2008

3040-01-565-6493
Hydraulic Accumulator Cylinder

015656493
GG731631A: RNCC: 3 | RNVC: 2

1 Aug 2008

3040-01-566-9533
Nonrotating Shaft Eye Bracket

015669533
4294435: RNCC: 3 | RNVC: 2
4294435: RNCC: 5 | RNVC: 2

15 Sep 2008

3040-01-567-0646
Shoe Type Brake

015670646
02-550-114: RNCC: 3 | RNVC: 2
MN-1342: RNCC: 5 | RNVC: 9

17 Sep 2008

3040-01-566-9684
Rigid Connecting Link

015669684
4299040: RNCC: 3 | RNVC: 2
4299040: RNCC: 5 | RNVC: 2

15 Sep 2008

3040-01-567-1314
Rigid Connecting Link

015671314
8551-A-12: RNCC: 3 | RNVC: 2
3679947C92: RNCC: 5 | RNVC: 2

18 Sep 2008

3040-01-567-1263
Cylinder Support

015671263
3683191C91: RNCC: 3 | RNVC: 2
3683191C91L: RNCC: 5 | RNVC: 9

18 Sep 2008

3040-01-568-5112
Rigid Connecting Link

015685112
S-247.25: RNCC: 3 | RNVC: 2

3 Nov 2008

3040-01-569-0748
Shouldered Shaft

015690748
1402-21041-34: RNCC: 3 | RNVC: 2

19 Nov 2008

3040-01-569-0824
Shouldered Shaft

015690824
1403-21045-34: RNCC: 3 | RNVC: 2

19 Nov 2008

3040-01-569-3627
Shouldered Shaft

015693627
13017545: RNCC: 3 | RNVC: 2

27 Nov 2008

3040-01-569-9461
Straight Shaft

015699461
AT-LG-500-350: RNCC: 3 | RNVC: 2

11 Dec 2008

3040-01-569-9464
Mechanical Drive Housing

015699464
1802001: RNCC: 3 | RNVC: 2

11 Dec 2008

3040-01-569-6594
Rigid Connecting Link

015696594
FA0643: RNCC: 3 | RNVC: 2

5 Dec 2008

3040-01-569-9468
Straight Shaft

015699468
AT-LG-500-360: RNCC: 3 | RNVC: 2

11 Dec 2008

3040-01-570-0308
Mechanical Drive Housing

015700308
0109-06027-33: RNCC: 3 | RNVC: 2

15 Dec 2008

3040-01-570-2464
Body Hub

015702464
0100-06084-40: RNCC: 3 | RNVC: 2

18 Dec 2008

3040-01-570-4419
Shaft Collar

015704419
57145K75: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-570-7241
Body Hub

015707241
4G10638H01: RNCC: 3 | RNVC: 2
4G10635 ITEM 006: RNCC: 5 | RNVC: 1
PL4G10635 ITEM 006: RNCC: 5 | RNVC: 1

12 Jan 2009

3040-01-570-6630
Mechanically Actuated Spindle

015706630
A-3213-K-2117: RNCC: 3 | RNVC: 2

8 Jan 2009

3040-01-571-1310
Straight Shaft

015711310
3740AS2013-1: RNCC: 3 | RNVC: 2

26 Jan 2009

3040-01-572-6740
Shouldered Shaft

015726740
3023-345: RNCC: 3 | RNVC: 2

19 Mar 2009

3040-01-573-4166
Bevel Gear And Shaft Assembly

015734166
41140-ZY6-000: RNCC: 3 | RNVC: 9

22 Apr 2009

3040-01-573-6602
Rotary Actuating Cylinder Assembly

015736602
12424660: RNCC: 3 | RNVC: 2

1 May 2009

3040-01-573-9902
Linear Actuating Cylinder Assembly Parts Kit

015739902
BB278667A50: RNCC: 3 | RNVC: 2
BB278667AA / BB278667A50: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-575-3115
Mechanical Drive Housing

015753115
5405/2-145-000: RNCC: 3 | RNVC: 2
0511PL FIND NO5/0511-15-S731-100: RNCC: 5 | RNVC: 2
5400 PL PART NO. 5400-3-999-000: RNCC: 5 | RNVC: 2
5400 REV C AND PL 5400 REV B: RNCC: 5 | RNVC: 2
5400-3-999-000: RNCC: 5 | RNVC: 9

26 Jun 2009

3040-01-575-4131
Hub Clamp

015754131
332/C0788: RNCC: 3 | RNVC: 2

1 Jul 2009

3040-01-575-7067
Rotary Actuating Cylinder Assembly

015757067
ABP N83 302051: RNCC: 3 | RNVC: 2
RDH RD5 5263 0: RNCC: 5 | RNVC: 9

13 Jul 2009

3040-01-575-7731
Rigid Connecting Link

015757731
14-17080-001: RNCC: 3 | RNVC: 2
14-17080: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-576-9466
Nonaircraft Mechanical Actuator

015769466
ABP N83 328355: RNCC: 3 | RNVC: 2
RDH RD3 6038 0: RNCC: 5 | RNVC: 9

20 Aug 2009

3040-01-578-9635
Nonaircraft Mechanical Actuator

015789635
6442704-200M1: RNCC: 3 | RNVC: 2
6442704-200M1: RNCC: 3 | RNVC: 9
6442704-200M1: RNCC: 5 | RNVC: 2

27 Oct 2009

3040-01-577-9849
Shaft Idler

015779849
R0097743: RNCC: 3 | RNVC: 2
R0097743: RNCC: 5 | RNVC: 2
R0097743-0102: RNCC: D | RNVC: 9

23 Sep 2009

3040-01-579-9487
Nonaircraft Mechanical Actuator

015799487
ABP N83 301429: RNCC: 3 | RNVC: 2
RDH RD5 8791 0: RNCC: 5 | RNVC: 9

30 Nov 2009

3040-01-580-5057
Shouldered Shaft

015805057
6445054-01M1: RNCC: 3 | RNVC: 2
6445054-01M1: RNCC: 3 | RNVC: 2
6445054-01M1: RNCC: 3 | RNVC: 2
6445054-01M1: RNCC: 3 | RNVC: 9
6445054-01M1: RNCC: 5 | RNVC: 2

16 Dec 2009

3040-01-582-4637
Bell Crank

015824637
0312107148-00: RNCC: 3 | RNVC: 2
26KP363: RNCC: 7 | RNVC: 2
0312107048-00: RNCC: D | RNVC: 9
3844278: RNCC: D | RNVC: 9

23 Feb 2010

3040-01-582-3524
Nonaircraft Mechanical Actuator

015823524
9585: RNCC: 3 | RNVC: 2

17 Feb 2010

3040-01-582-5726
Housing Adapter

015825726
MT93-1363: RNCC: 3 | RNVC: 2
22KP282: RNCC: 7 | RNVC: 2

26 Feb 2010

3040-01-583-8843
Planetary Gears Carrier

015838843
3792579C1: RNCC: 3 | RNVC: 2
69084-002: RNCC: C | RNVC: 1

9 Apr 2010

3040-01-584-5209
Linear Actuating Cylinder

015845209
0974901G: RNCC: 3 | RNVC: 2
0974901: RNCC: 5 | RNVC: 9

28 Apr 2010

3040-01-584-6948
Straight Shaft

015846948
449-040-113-101: RNCC: 3 | RNVC: 2

4 May 2010

3040-01-585-4094
Helical Gearshaft

015854094
R504843: RNCC: 3 | RNVC: 2

25 May 2010

3040-01-587-1030
Nonaircraft Mechanical Actuator

015871030
KL16KNG21T10V1-11: RNCC: 3 | RNVC: 2

23 Jul 2010

3040-01-587-6995
Control Cam

015876995
707212-6: RNCC: 3 | RNVC: 2
707212-6: RNCC: 3 | RNVC: 9

17 Aug 2010

3040-01-588-5012
Manual Control Lever

015885012
01317800: RNCC: 3 | RNVC: 2
H201287: RNCC: 7 | RNVC: 2

22 Sep 2010

3040-01-589-5264
Inertia Damper

015895264
12505368-005: RNCC: 3 | RNVC: 2
12505368: RNCC: D | RNVC: 9

29 Oct 2010

3040-01-592-4718
Mechanically Actuated Spindle

015924718
3922AS141-1: RNCC: 3 | RNVC: 2

8 Mar 2011

3040-01-593-2365
Worm Shaft

015932365
6037940-1: RNCC: 3 | RNVC: 2

5 Apr 2011

3040-01-593-7423
Straight Shaft Assembly

015937423
7548595-552: RNCC: 3 | RNVC: 2

14 Apr 2011

3040-01-594-7694
Straight Shaft

015947694
307-8322: RNCC: 3 | RNVC: 2
CV182518: RNCC: 5 | RNVC: 2
307-8322: RNCC: 5 | RNVC: 2
23KP855: RNCC: 5 | RNVC: 2
23KP855: RNCC: 5 | RNVC: 9

25 Apr 2011

3040-01-595-4759
Pivot Shaft Assembly

015954759
9720-163: RNCC: 3 | RNVC: 2

28 Apr 2011

3040-01-598-7831
Rigid Connecting Link

015987831
10014712: RNCC: 3 | RNVC: 2

26 Aug 2011

3040-01-598-8470
Ball Joint

015988470
R0071167: RNCC: 3 | RNVC: 2
R0071167: RNCC: 5 | RNVC: 2
R0071167-0301: RNCC: D | RNVC: 9

30 Aug 2011

3040-01-600-7029
Linear Actuating Cylinder Assembly

016007029
3776821132: RNCC: 3 | RNVC: 2

15 Dec 2011

3040-01-601-0947
Shouldered Shaft

016010947
52720822: RNCC: 3 | RNVC: 2
24KP271: RNCC: 5 | RNVC: 2
24KP271: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-602-0263
Shouldered Shaft

016020263
014-1410002-554: RNCC: 3 | RNVC: 2
999-1107-A-41 ITEM- 14: RNCC: 5 | RNVC: 2
014-1410002-252: RNCC: 5 | RNVC: 9

26 Jan 2012

3040-01-602-7175
Compression Piston

016027175
PH-C-14456: RNCC: 3 | RNVC: 2
WH-300001 REV.000 NO.068: RNCC: 5 | RNVC: 2

3 Feb 2012

3040-01-603-3426
Rigid Connecting Link

016033426
315A2504-8: RNCC: 3 | RNVC: 2

29 Feb 2012

3040-01-604-2820
Rigid Connecting Link

016042820
10000365: RNCC: 3 | RNVC: 2

2 Apr 2012

3040-01-605-0898
Remote Control Lever

016050898
335/05063: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-3634
Threaded Shaft

016053634
901-215-063-121: RNCC: 1 | RNVC: 2
901-215-063-121: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-3973
Shaft Collar

016053973
HL73DY-5: RNCC: 3 | RNVC: 2
HL73DY-5: RNCC: 5 | RNVC: 9

19 Apr 2012

3040-01-605-7967
Shouldered Shaft

016057967
R8506603-SP102: RNCC: 3 | RNVC: 2
R8506603-SP102: RNCC: 5 | RNVC: 2

25 Apr 2012

3040-01-605-8117
Straight Shaft

016058117
14003020: RNCC: 3 | RNVC: 2
14003020: RNCC: 3 | RNVC: 9
14003016 ITEM NO. 4: RNCC: D | RNVC: 9

25 Apr 2012

3040-01-606-0155
Shouldered Shaft

016060155
25KP189: RNCC: 3 | RNVC: 2
25KP189: RNCC: 3 | RNVC: 9

3 May 2012

3040-01-606-8056
Push-Pull Control Assembly

016068056
897977A16: RNCC: 3 | RNVC: 2
850716A16: RNCC: 5 | RNVC: 9

24 May 2012

3040-01-607-0590
Shoe Assembly Cw

016070590
20-8593-2: RNCC: 3 | RNVC: 2
478593-2: RNCC: 5 | RNVC: 2

30 May 2012

3040-01-607-3243
Flexible Shaft Assembly

016073243
2ABS12005: RNCC: 3 | RNVC: 2
2ABS12005: RNCC: 3 | RNVC: 9

8 Jun 2012

3040-01-607-1104
Piston Ring

016071104
R8506378-SP300: RNCC: 3 | RNVC: 2
R8506378-SP300: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-562-8425
Pivot Shaft Assembly

015628425
3675767: RNCC: 3 | RNVC: 2
3675767: RNCC: 5 | RNVC: 9

23 Apr 2008

3040-01-563-4021
Shouldered Shaft Assembly

015634021
13017380: RNCC: 3 | RNVC: 2

9 May 2008

3040-01-563-6151
Vehicular Components Bracket

015636151
12621495: RNCC: 3 | RNVC: 2
LS1048433: RNCC: 5 | RNVC: 2

15 May 2008

3040-01-570-1673
Straight Shaft Assembly

015701673
3392AS840: RNCC: 3 | RNVC: 2

17 Dec 2008

3040-01-574-5555
Linear Actuating Cylinder Assembly

015745555
2087641: RNCC: 3 | RNVC: 2
2087641: RNCC: 5 | RNVC: 2

1 Jun 2009

3040-01-578-5214
Straight Shaft Assembly

015785214
8E3507: RNCC: 3 | RNVC: 2

8 Oct 2009

3040-01-581-0074
Piston Ring

015810074
102355A: RNCC: 3 | RNVC: 2
P05235: RNCC: 5 | RNVC: 2
E108130 FIND 34: RNCC: 5 | RNVC: 2

4 Jan 2010

3040-01-528-1642
Nonaircraft Mechanical Actuator

015281642
APC30303: RNCC: 3 | RNVC: 2
APC30303: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-529-2873
Manual Control Lever Assembly

015292873
37-00706D-008: RNCC: 3 | RNVC: 2
37D00706-008: RNCC: 5 | RNVC: 9

12 Apr 2005

3040-01-529-3228
Spur Gearshaft

015293228
201.0817: RNCC: 3 | RNVC: 2
PL MODEL 201-S ITEM 17: RNCC: 5 | RNVC: 2
201.0811: RNCC: 5 | RNVC: 9

13 Apr 2005

3040-01-530-6854
Shaft Retaining Plate

015306854
7550138-29: RNCC: 3 | RNVC: 2
7550079-37: RNCC: 5 | RNVC: 1
G545-4102-37: RNCC: 5 | RNVC: 1
G545-4105-29: RNCC: 5 | RNVC: 2
7550138-29: RNCC: 5 | RNVC: 2

8 Jun 2005

3040-01-530-9404
Linear Actuating Cylinder Assembly

015309404
D-WK-861-8 REV C: RNCC: 3 | RNVC: 2
D-WK-861-8 PC6: RNCC: 5 | RNVC: 9
D-WK-861-20: RNCC: 5 | RNVC: 9

17 Jun 2005

3040-01-531-4383
Rigid Connecting Link

015314383
22D0043-1: RNCC: 3 | RNVC: 2
22D0043: RNCC: D | RNVC: 9

8 Jul 2005

3040-01-531-2668
Body Hub

015312668
29505977: RNCC: 3 | RNVC: 2

30 Jun 2005

3040-01-532-2817
Rigid Connecting Link

015322817
901-031-676-129: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-2949
Rigid Connecting Link

015322949
901-301-022-121: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-4353
Control Cam

015324353
313-0031: RNCC: 3 | RNVC: 2
6515NAB-500 ITEM 14: RNCC: 5 | RNVC: 2

9 Aug 2005

3040-01-534-4579
Rigid Connecting Link

015344579
113435-1: RNCC: 3 | RNVC: 2
113435: RNCC: D | RNVC: 9

24 Oct 2005

3040-01-535-4182
Rigid Connecting Link

015354182
70-3028: RNCC: 3 | RNVC: 2
70-2030 ITEM 10: RNCC: 5 | RNVC: 2
M2065 ITEM 25: RNCC: 5 | RNVC: 2
70-2030M ITEM 10: RNCC: 5 | RNVC: 2

29 Nov 2005

3040-01-534-7401
Ball Joint

015347401
ES250: RNCC: 3 | RNVC: 2

1 Nov 2005

3040-01-536-5571
Rigid Connecting Link

015365571
30-60030-00: RNCC: 3 | RNVC: 2

6 Jan 2006

3040-01-538-2745
Straight Shaft

015382745
GXHB-99-16-045-0: RNCC: 3 | RNVC: 2
GXHB-99-16-050-0: RNCC: 5 | RNVC: 9

16 Mar 2006

3040-01-538-8539
Shouldered Shaft

015388539
F-WK-871-4 PC 120: RNCC: 3 | RNVC: 2

3 Apr 2006

3040-01-539-2315
Manual Control Lever

015392315
12477942: RNCC: 3 | RNVC: 2

14 Apr 2006

3040-01-539-6286
Spur Gearshaft

015396286
167-6404600 FIND 74: RNCC: 3 | RNVC: 2

27 Apr 2006

3040-01-539-5319
Remote Control Lever

015395319
167-6404600 FIND 32: RNCC: 3 | RNVC: 2

25 Apr 2006

3040-01-540-3498
Shouldered Shaft Assembly

015403498
5009550: RNCC: 3 | RNVC: 2
5001766: RNCC: 3 | RNVC: 9
5001766: RNCC: 5 | RNVC: 9

16 May 2006

3040-01-541-1479
Gearbox Parts Kit

015411479
5006373: RNCC: 3 | RNVC: 2
5006373: RNCC: 5 | RNVC: 9

16 Jun 2006

3040-01-541-1797
Straight Shaft

015411797
GTHB-99-17-056-0: RNCC: 3 | RNVC: 2

19 Jun 2006

3040-01-541-4822
Push-Pull Control Assembly

015414822
005675: RNCC: 3 | RNVC: 2

28 Jun 2006

3040-01-541-5419
Rigid Connecting Link

015415419
29908-01K: RNCC: 3 | RNVC: 2
205101 ITEM 11: RNCC: 5 | RNVC: 2

29 Jun 2006

3040-01-542-4036
Rigid Connecting Link

015424036
12501509: RNCC: 3 | RNVC: 2

3 Aug 2006

3040-01-543-3118
Straight Shaft

015433118
458/20644: RNCC: 3 | RNVC: 2
458/20644: RNCC: 5 | RNVC: 2
458/20644: RNCC: 5 | RNVC: 2
458/20644: RNCC: 5 | RNVC: 2
458/20644: RNCC: 5 | RNVC: 2

8 Sep 2006

3040-01-543-4135
Rigid Connecting Link

015434135
29025: RNCC: 3 | RNVC: 9
29025: RNCC: 5 | RNVC: 2
29025: RNCC: 5 | RNVC: 9

12 Sep 2006

3040-01-544-6188
Shouldered Shaft

015446188
9U6896: RNCC: 3 | RNVC: 2
28KP862: RNCC: 5 | RNVC: 2
28KP862: RNCC: 5 | RNVC: 9

18 Oct 2006

3040-01-545-2348
Housing Adapter

015452348
70213-01007-102: RNCC: 3 | RNVC: 2

6 Nov 2006

3040-01-546-2576
Ball Joint

015462576
87421807: RNCC: 3 | RNVC: 2

12 Dec 2006

3040-01-548-0691
Rigid Connecting Link

015480691
101703-1: RNCC: 3 | RNVC: 2

8 Feb 2007

3040-01-546-2389
Mechanical Drive Housing

015462389
A-3201-G-7573: RNCC: 3 | RNVC: 2
A-3201-G-7573: RNCC: 5 | RNVC: 9

11 Dec 2006

3040-01-548-5533
Mechanical Drive Housing

015485533
25502829: RNCC: 3 | RNVC: 2
406KB156: RNCC: 5 | RNVC: 9

27 Feb 2007

3040-01-548-6850
Linear Actuating Cylinder Piston Rod

015486850
123726A1: RNCC: 3 | RNVC: 2

1 Mar 2007

3040-01-548-4359
Counterbalance Weight

015484359
200639142: RNCC: 3 | RNVC: 2

22 Feb 2007

3040-01-549-1847
Worm Wheel Gearshaft

015491847
16D33-UE: RNCC: 3 | RNVC: 2
16D33-E: RNCC: 5 | RNVC: 9

14 Mar 2007

3040-01-549-2000
Worm Wheel Gearshaft

015492000
CL40MRSBML-E: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-4017
Linear Actuating Cylinder Cap

015494017
297281A1: RNCC: 3 | RNVC: 2

20 Mar 2007

3040-01-549-5013
Remote Control Lever

015495013
347/10467: RNCC: 3 | RNVC: 2

22 Mar 2007

3040-01-549-6534
Linear Actuating Cylinder Piston

015496534
112370A4: RNCC: 3 | RNVC: 2

27 Mar 2007

3040-01-549-6200
Nonaircraft Mechanical Actuator

015496200
90025-02: RNCC: 3 | RNVC: 2
P-2415 P/N 90025-02: RNCC: 5 | RNVC: 2
P-2415: RNCC: D | RNVC: 9

27 Mar 2007

3040-01-550-1250
Rigid Connecting Link

015501250
110-170365-001: RNCC: 3 | RNVC: 2

10 Apr 2007

3040-01-551-6463
Mechanically Actuated Spindle

015516463
D-WK-871-56 PC1: RNCC: 3 | RNVC: 2

23 May 2007

Load More Results