What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 120 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 120of 575

3040-01-563-6172
Rigid Connecting Link

015636172
11E422050: RNCC: 3 | RNVC: 2
RIA149122: RNCC: 5 | RNVC: 9

15 May 2008

3040-01-563-8604
Straight Shaft

015638604
5286984: RNCC: 3 | RNVC: 2
3102618: RNCC: 5 | RNVC: 9
4920497: RNCC: 5 | RNVC: 9

27 May 2008

3040-01-563-9217
Rigid Connecting Link

015639217
803-6397268 PC 191: RNCC: 3 | RNVC: 2

29 May 2008

3040-01-564-0263
Rigid Connecting Link

015640263
B-090106X16-HASB: RNCC: 3 | RNVC: 2

3 Jun 2008

3040-01-564-1994
Spline Adapter

015641994
9661M85P10: RNCC: 3 | RNVC: 2
9661M85P08: RNCC: 5 | RNVC: 9

9 Jun 2008

3040-01-564-8733
Control Cam

015648733
16874-63B-75: RNCC: 3 | RNVC: 2

1 Jul 2008

3040-01-565-4601
Linear Actuating Cylinder Assembly

015654601
MIL-001-446: RNCC: 3 | RNVC: 2

25 Jul 2008

3040-01-565-9740
Rigid Connecting Link

015659740
3730875: RNCC: 3 | RNVC: 2
3711381: RNCC: 5 | RNVC: 9
3730875: RNCC: 5 | RNVC: 9

14 Aug 2008

3040-01-566-1399
Rigid Connecting Link

015661399
LCS2-13533-24S: RNCC: 3 | RNVC: 2
13533-24S: RNCC: 5 | RNVC: 9

21 Aug 2008

3040-01-566-3938
Piston Rod Ring

015663938
H155770: RNCC: 3 | RNVC: 2

29 Aug 2008

3040-01-566-6786
Rigid Connecting Link

015666786
859D10097-1: RNCC: 3 | RNVC: 2
859D10097-1: RNCC: 5 | RNVC: 9

8 Sep 2008

3040-01-567-1475
Rigid Connecting Link

015671475
3683116C93: RNCC: 3 | RNVC: 2
3683116C92L: RNCC: 5 | RNVC: 9
3683116C92: RNCC: D | RNVC: 9

18 Sep 2008

3040-01-567-4947
Handles Left Shaft Assembly

015674947
22KP141: RNCC: 3 | RNVC: 2
12508497: RNCC: 5 | RNVC: 2
22KP141: RNCC: 5 | RNVC: 9

29 Sep 2008

3040-01-567-7451
Rigid Connecting Link

015677451
1410385: RNCC: 3 | RNVC: 2
TV080033: RNCC: 3 | RNVC: 9
TV080033: RNCC: 5 | RNVC: 9

6 Oct 2008

3040-01-567-8614
Shouldered Shaft

015678614
803-6397269 PC 85 MOD 316 SST: RNCC: 3 | RNVC: 2

9 Oct 2008

3040-01-568-3154
Linear Actuating Cylinder

015683154
TT-002: RNCC: 3 | RNVC: 9
TT-003: RNCC: 5 | RNVC: 9
TT-003: RNCC: C | RNVC: 1

27 Oct 2008

3040-01-568-6542
Nonaircraft Mechanical Actuator

015686542
33307-40425-10: RNCC: 3 | RNVC: 2

4 Nov 2008

3040-01-568-6575
Rigid Connecting Link

015686575
803-6397269 ASSY G-2: RNCC: 3 | RNVC: 2
803-6397268 PC195: RNCC: 5 | RNVC: 2

5 Nov 2008

3040-01-569-6044
Breather

015696044
41060-02-SV: RNCC: 3 | RNVC: 2

4 Dec 2008

3040-01-570-0322
Shouldered Shaft

015700322
1401-21020-33: RNCC: 3 | RNVC: 2

15 Dec 2008

3040-01-570-3701
Push-Pull Control Assembly

015703701
317302-03-138.0: RNCC: 3 | RNVC: 2
315058-3500: RNCC: 5 | RNVC: 2
315058-3500: RNCC: 5 | RNVC: 9

24 Dec 2008

3040-01-570-4421
Mechanical Drive Housing

015704421
29538345: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-572-9237
Shouldered Shaft

015729237
YZ4102930: RNCC: 3 | RNVC: 2
YZ4101422: RNCC: 5 | RNVC: 9

31 Mar 2009

3040-01-572-7912
Rigid Connecting Link

015727912
9-55623-2: RNCC: 3 | RNVC: 2

25 Mar 2009

3040-01-573-9880
Linear Actuating Cylinder Assembly

015739880
1H000040757: RNCC: 3 | RNVC: 2
BB278667AA: RNCC: 5 | RNVC: 9
BB278667A0: RNCC: 5 | RNVC: 9

12 May 2009

3040-01-575-3021
Manual Control Lever

015753021
DN60-3-24B: RNCC: 3 | RNVC: 2
DN60-3-24B: RNCC: 3 | RNVC: 9
D50-0016 ITEM 28: RNCC: 5 | RNVC: 2
D50-0016 ITEM 28: RNCC: 5 | RNVC: 9

26 Jun 2009

3040-01-575-3898
Rigid Connecting Link

015753898
347/11088: RNCC: 3 | RNVC: 2

30 Jun 2009

3040-01-575-7646
Rigid Connecting Link

015757646
WWS 50285-3402: RNCC: 3 | RNVC: 2

14 Jul 2009

3040-01-575-7084
Rigid Connecting Link

015757084
WWS 50287-3402: RNCC: 3 | RNVC: 2
50287-3402: RNCC: D | RNVC: 9

13 Jul 2009

3040-01-576-2720
Manual Control Lever

015762720
5005238: RNCC: 3 | RNVC: 2

27 Jul 2009

3040-01-576-6803
Straight Shaft

015766803
204-65535-1: RNCC: 3 | RNVC: 2

11 Aug 2009

3040-01-578-3155
Rigid Connecting Link

015783155
4002911: RNCC: 3 | RNVC: 2
52685-440: RNCC: 5 | RNVC: 2

1 Oct 2009

3040-01-578-3163
Rigid Connecting Link

015783163
4002910: RNCC: 3 | RNVC: 2
52683-440: RNCC: 5 | RNVC: 2

1 Oct 2009

3040-01-578-9040
Straight Shaft

015789040
N7086: RNCC: 3 | RNVC: 2

23 Oct 2009

3040-01-578-9640
Rigid Connecting Link

015789640
6443356-01M1: RNCC: 3 | RNVC: 2
6443356-01M1: RNCC: 3 | RNVC: 9
6443356-01M1: RNCC: 5 | RNVC: 2

27 Oct 2009

3040-01-579-8471
Shouldered Shaft

015798471
12509347: RNCC: 3 | RNVC: 2

25 Nov 2009

3040-01-580-2552
Flexible Shaft Assembly

015802552
212-070-493-107: RNCC: 3 | RNVC: 2

9 Dec 2009

3040-01-583-2688
Shouldered Shaft

015832688
M27780010: RNCC: 3 | RNVC: 2
M27780010: RNCC: 3 | RNVC: 9
A31170060 ITEM 25: RNCC: 5 | RNVC: 9

22 Mar 2010

3040-01-583-6693
Linear Actuating Cylinder

015836693
UC128OBF-2P: RNCC: 3 | RNVC: 2
UC128P-OBF2: RNCC: 5 | RNVC: 9

1 Apr 2010

3040-01-583-0786
Body Hub

015830786
10667587-001: RNCC: 3 | RNVC: 9
10667587-001: RNCC: 5 | RNVC: 2

15 Mar 2010

3040-01-589-9563
Pawl

015899563
6445727-01M1: RNCC: 3 | RNVC: 2
6445727-01M1: RNCC: 3 | RNVC: 2
6445727-01M1: RNCC: 3 | RNVC: 9
6445727-01M1: RNCC: 5 | RNVC: 2
6445727: RNCC: D | RNVC: 9

9 Nov 2010

3040-01-589-6359
Rigid Connecting Link

015896359
3896565: RNCC: 3 | RNVC: 2
3896565: RNCC: 5 | RNVC: 9

1 Nov 2010

3040-01-589-6372
Shaft Collar

015896372
6436K15: RNCC: 3 | RNVC: 2
3902138: RNCC: 5 | RNVC: 9
3902138: RNCC: 7 | RNVC: 2

1 Nov 2010

3040-01-591-7314
Mechanical Drive Housing

015917314
3180738-6: RNCC: 3 | RNVC: 2

7 Feb 2011

3040-01-592-6753
Mechanical Drive Housing

015926753
865440H66: RNCC: 3 | RNVC: 2

15 Mar 2011

3040-01-592-4796
Shouldered Shaft

015924796
6408-S3-1-5: RNCC: 3 | RNVC: 2

8 Mar 2011

3040-01-593-8580
Counterbalance Weight

015938580
771830: RNCC: 3 | RNVC: 2

20 Apr 2011

3040-01-595-4570
Shouldered Shaft

015954570
GTEET0006: RNCC: 3 | RNVC: 2

27 Apr 2011

3040-01-596-0732
Manual Control Lever Assembly

015960732
PST: RNCC: 3 | RNVC: 2

11 May 2011

3040-01-595-9543
Shouldered Shaft

015959543
8464-1514-00: RNCC: 3 | RNVC: 9
8464-1514-00: RNCC: C | RNVC: 1
DD-8464-1514-00: RNCC: D | RNVC: 9

9 May 2011

3040-01-596-4908
Control Cam

015964908
SYLC-1670: RNCC: 3 | RNVC: 2

18 May 2011

3040-01-597-3422
Cap Clevis Cylinder

015973422
A203ARM82: RNCC: 3 | RNVC: 2

7 Jun 2011

3040-01-598-1213
Shouldered Shaft

015981213
SYLC-1899: RNCC: 3 | RNVC: 2

30 Jun 2011

3040-01-598-9015
Shouldered Shaft

015989015
980256: RNCC: 3 | RNVC: 2

31 Aug 2011

3040-01-602-4935
Parts Kit

016024935
3651382: RNCC: 3 | RNVC: 2

31 Jan 2012

3040-01-602-5336
Camshaft Parts Kit

016025336
K71-101-00: RNCC: 3 | RNVC: 9
DXK71-101-00: RNCC: 5 | RNVC: 2

31 Jan 2012

3040-01-603-1729
Multiple Gears Gearshaft

016031729
1717372: RNCC: 3 | RNVC: 2

23 Feb 2012

3040-01-604-7879
Linear Actuating Cylinder Assembly Parts Kit

016047879
AH161591: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-605-1791
Breather

016051791
129045: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-4849
Piston Rod Guide

016054849
DSB90597-11161-15: RNCC: 3 | RNVC: 2
DSB90597-11161PC15: RNCC: 5 | RNVC: 2
156526: RNCC: 5 | RNVC: 2

19 Apr 2012

3040-01-606-7577
Flexible Casing End Fitting

016067577
2ABV12006: RNCC: 3 | RNVC: 2
2ABV12006: RNCC: 3 | RNVC: 9

23 May 2012

3040-01-608-4867
Buffer Sheave Ram

016084867
3491AS0741-1: RNCC: 3 | RNVC: 2
3491AS0741-1: RNCC: 5 | RNVC: 2

28 Jun 2012

3040-01-527-5865
Shouldered Shaft

015275865
14366: RNCC: 3 | RNVC: 2

9 Feb 2005

3040-01-528-1597
Straight Shaft

015281597
APC30225: RNCC: 3 | RNVC: 2
APC30225: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-528-3683
Shouldered Shaft

015283683
AT-LG-500-320: RNCC: 3 | RNVC: 2

10 Mar 2005

3040-01-528-4853
Housing Adapter

015284853
6033520: RNCC: 3 | RNVC: 2

15 Mar 2005

3040-01-531-6537
Rigid Connecting Link

015316537
12479392: RNCC: 3 | RNVC: 2

18 Jul 2005

3040-01-531-9895
Pawl

015319895
0106822-00: RNCC: 3 | RNVC: 2
0106822-00: RNCC: 3 | RNVC: 9
0106822-00: RNCC: 5 | RNVC: 2

25 Jul 2005

3040-01-531-5086
Bell Crank

015315086
107550: RNCC: 3 | RNVC: 2

13 Jul 2005

3040-01-532-2948
Rigid Connecting Link

015322948
901-301-022-117: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-2954
Rigid Connecting Link

015322954
901-301-022-131: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-534-6215
Linear Actuating Cylinder Assembly

015346215
11450023-9: RNCC: 3 | RNVC: 2

27 Oct 2005

3040-01-534-6459
Bell Crank

015346459
803-6397269 PC 69 MOD CRES 316: RNCC: 3 | RNVC: 2
803-6397268 PC 95 MOD CRES 316: RNCC: 5 | RNVC: 2

28 Oct 2005

3040-01-532-5239
Bell Crank

015325239
5-67388-13: RNCC: 3 | RNVC: 2
5-67388-13: RNCC: 5 | RNVC: 2
5-67388-11: RNCC: 5 | RNVC: 9

11 Aug 2005

3040-01-537-3160
Remote Control Lever

015373160
047-020-00: RNCC: 3 | RNVC: 9

2 Feb 2006

3040-01-538-0215
Nonaircraft Mechanical Actuator

015380215
D-BK: RNCC: 3 | RNVC: 9

8 Mar 2006

3040-01-538-8529
Linear Actuating Cylinder Piston Rod

015388529
F-WK-871-4 PC 85: RNCC: 3 | RNVC: 2

3 Apr 2006

3040-01-538-7611
Rigid Connecting Link

015387611
74A671213-2006: RNCC: 3 | RNVC: 2

30 Mar 2006

3040-01-539-1525
Housing Adapter

015391525
12221/5-999-000: RNCC: 3 | RNVC: 2
12274PL FIND3 PN 12221/5-999-000: RNCC: D | RNVC: 9
12274: RNCC: D | RNVC: 9

12 Apr 2006

3040-01-538-8666
Manual Control Lever

015388666
382-812-030-401-026: RNCC: 3 | RNVC: 2

3 Apr 2006

3040-01-539-3916
Transmission Sleeve

015393916
F-WK-871-4 PC 105: RNCC: 3 | RNVC: 2
F-WK-871-4: RNCC: D | RNVC: 9

20 Apr 2006

3040-01-540-0287
Straight Shaft

015400287
167-6404600 FIND 34: RNCC: 3 | RNVC: 2
DF 1502-249-0034: RNCC: 5 | RNVC: 2
211017197: RNCC: 5 | RNVC: 9

8 May 2006

3040-01-539-9362
Linear Actuating Cylinder Assembly Parts Kit

015399362
AH164325: RNCC: 3 | RNVC: 2
AH164325: RNCC: 5 | RNVC: 2
AH164325: RNCC: 5 | RNVC: 2
AH164325: RNCC: 5 | RNVC: 9
AH164325: RNCC: 5 | RNVC: 9

4 May 2006

3040-01-541-1922
Multiple Gears Gearshaft

015411922
9904105288: RNCC: 3 | RNVC: 2

19 Jun 2006

3040-01-541-2820
Door Latch Linkage

015412820
2004A944: RNCC: 3 | RNVC: 2
2004A944-1: RNCC: 5 | RNVC: 2

22 Jun 2006

3040-01-543-3691
Linear Actuating Cylinder Piston

015433691
306-85-23: RNCC: 3 | RNVC: 2
1000917: RNCC: 5 | RNVC: 1

11 Sep 2006

3040-01-540-0411
Breather

015400411
9237270559: RNCC: 3 | RNVC: 2
923727.0559: RNCC: 5 | RNVC: 2
CV187124: RNCC: 5 | RNVC: 2
923727.0559: RNCC: 5 | RNVC: 2

8 May 2006

3040-01-542-1990
Spline Adapter

015421990
4502102: RNCC: 3 | RNVC: 2

26 Jul 2006

3040-01-545-0208
Ball Joint

015450208
8702-055-00V: RNCC: 3 | RNVC: 2

30 Oct 2006

3040-01-545-0450
Linear Actuating Cylinder Piston Rod

015450450
590/40154: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-0468
Linear Actuating Cylinder Piston Rod

015450468
590/40253: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-8362
Rigid Connecting Link

015458362
200622257-10: RNCC: 3 | RNVC: 2
200622257-10: RNCC: 3 | RNVC: 2

28 Nov 2006

3040-01-546-1816
Linear Actuating Cylinder Assembly Parts Kit

015461816
112842: RNCC: 3 | RNVC: 2

8 Dec 2006

3040-01-545-5868
Straight Shaft

015455868
209675: RNCC: 3 | RNVC: 2

17 Nov 2006

3040-01-545-6723
Mechanical Drive Housing

015456723
596-7409758-A8: RNCC: 3 | RNVC: 2
B831-8000-5: RNCC: 5 | RNVC: 1
596-7409757-5: RNCC: 5 | RNVC: 1
B831-8100-A8: RNCC: 5 | RNVC: 2

21 Nov 2006

3040-01-547-0559
Socket Handle

015470559
B26648: RNCC: 3 | RNVC: 2

11 Jan 2007

3040-01-547-4162
Manual Control Lever

015474162
279261A2: RNCC: 3 | RNVC: 2
367977A1: RNCC: 3 | RNVC: 9

19 Jan 2007

3040-01-547-3604
Control Cam

015473604
26032004916: RNCC: 3 | RNVC: 2
26032004916: RNCC: 3 | RNVC: 9
S9233-XX-MMA-010/LCS SH7-57 #303: RNCC: 5 | RNVC: 2

18 Jan 2007

3040-01-547-5788
Shouldered Shaft

015475788
1800-08150: RNCC: 3 | RNVC: 2
1800-08150: RNCC: 3 | RNVC: 9

25 Jan 2007

3040-01-547-4941
Shouldered Shaft

015474941
16222024-1: RNCC: 3 | RNVC: 2
16221000 FIND NO.10: RNCC: 5 | RNVC: 9
16222024-1: RNCC: 5 | RNVC: 9
16221000 FIND NO.10: RNCC: C | RNVC: 1

23 Jan 2007

3040-01-547-7101
Remote Control Lever

015477101
71749: RNCC: 3 | RNVC: 2
73977: RNCC: 3 | RNVC: 9

30 Jan 2007

3040-01-548-5658
Rigid Connecting Link

015485658
16231200: RNCC: 3 | RNVC: 2
16231000 FIND NO.4: RNCC: 5 | RNVC: 9
16231200: RNCC: 5 | RNVC: 9

27 Feb 2007

3040-01-548-7346
Bell Crank

015487346
176311A1: RNCC: 3 | RNVC: 2

2 Mar 2007

3040-01-549-1983
Worm Wheel Gearshaft

015491983
CL40MRSBML-A: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-551-1321
Rigid Connecting Link

015511321
2006A1011: RNCC: 3 | RNVC: 2

8 May 2007

3040-01-551-1324
Rigid Connecting Link

015511324
2006A1012: RNCC: 3 | RNVC: 2

8 May 2007

3040-01-551-4640
Control Cam

015514640
S25735: RNCC: 3 | RNVC: 2
18944 ITEM 104: RNCC: 5 | RNVC: 2

17 May 2007

3040-01-551-5074
Worm Shaft

015515074
1994-246: RNCC: 3 | RNVC: 2
5KP992: RNCC: 5 | RNVC: 2
5KP992: RNCC: 5 | RNVC: 9

18 May 2007

3040-01-551-6168
Nonrotating Shaft Eye Bracket

015516168
TYUW13558A: RNCC: 3 | RNVC: 2
8H-A32075: RNCC: D | RNVC: 9

22 May 2007

3040-01-552-1120
Breather

015521120
5216: RNCC: 3 | RNVC: 2
D-WK-471-56 PC4: RNCC: 5 | RNVC: 2
5216: RNCC: 5 | RNVC: 9

6 Jun 2007

3040-01-552-7076
Linear Actuating Cylinder Piston

015527076
2001902: RNCC: 3 | RNVC: 2
2B4106900: RNCC: 5 | RNVC: 2

21 Jun 2007

3040-01-553-8289
Key

015538289
45201512: RNCC: 3 | RNVC: 2
45201512: RNCC: 5 | RNVC: 9

26 Jul 2007

3040-01-553-9004
Linear Actuating Cylinder Assembly

015539004
19550412: RNCC: 3 | RNVC: 9
19550412: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-2386
Rigid Connecting Link

015542386
123AM42010-3: RNCC: 3 | RNVC: 2
123AM42010-3: RNCC: 5 | RNVC: 9
123AM42010-3: RNCC: 5 | RNVC: 9

2 Aug 2007

3040-01-554-3978
Transmission Planetary Carrier Assembly Parts Kit

015543978
29531096: RNCC: 3 | RNVC: 2

8 Aug 2007

3040-01-555-4498
Rigid Connecting Link

015554498
USCTR-001-107: RNCC: 3 | RNVC: 2
901-301-022-107: RNCC: 7 | RNVC: 2

6 Sep 2007

3040-01-559-0403
Rigid Connecting Link

015590403
A60200058: RNCC: 3 | RNVC: 2

4 Dec 2007

3040-01-558-7244
Shouldered Shaft

015587244
21C14067P11: RNCC: 3 | RNVC: 2
21C14067P11: RNCC: 5 | RNVC: 2
21C14067: RNCC: D | RNVC: 9

20 Nov 2007

3040-01-559-6103
Linear Actuating Cylinder Assembly

015596103
A203ARR56: RNCC: 3 | RNVC: 2

26 Dec 2007

3040-01-559-3476
Shouldered Shaft

015593476
SM-B-801628: RNCC: 3 | RNVC: 2

13 Dec 2007

3040-01-560-1176
Shouldered Shaft

015601176
5614-151-000: RNCC: 3 | RNVC: 2
0509 PL FIND NO 35: RNCC: 5 | RNVC: 2
5614-1-151-000: RNCC: 5 | RNVC: 9

16 Jan 2008

3040-01-560-7165
Straight Shaft

015607165
7417585: RNCC: 3 | RNVC: 2

11 Feb 2008

3040-01-560-7678
Shouldered Shaft

015607678
189048-2: RNCC: 3 | RNVC: 2

12 Feb 2008

3040-01-562-0978
Linear Actuating Cylinder Assembly Parts Kit

015620978
3J15809: RNCC: 3 | RNVC: 2

28 Mar 2008

3040-01-562-9340
Shouldered Shaft

015629340
3305AS1120-1: RNCC: 3 | RNVC: 2

25 Apr 2008

3040-01-563-1353
Mechanical Drive Housing

015631353
196-100-041: RNCC: 3 | RNVC: 2

2 May 2008

3040-01-563-4472
Body Hub

015634472
8242881-2: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-563-9214
Bell Crank

015639214
803-6397268 PC 159: RNCC: 3 | RNVC: 2

29 May 2008

3040-01-563-8472
Sleeve Lock Handle

015638472
3643592: RNCC: 3 | RNVC: 2
3643592: RNCC: 5 | RNVC: 9

27 May 2008

3040-01-564-0284
Rigid Connecting Link

015640284
B-090106X16-HIST: RNCC: 3 | RNVC: 2
803-6397269 PC 15 MOD: RNCC: 5 | RNVC: 2

3 Jun 2008

3040-01-564-0463
Nonaircraft Mechanical Actuator

015640463
3113721C91: RNCC: 3 | RNVC: 2
3113721C91L: RNCC: 5 | RNVC: 9

3 Jun 2008

3040-01-564-2365
Planetary Gears Carrier

015642365
6603/1M-999-000: RNCC: 3 | RNVC: 2
6603/1-999-000: RNCC: 3 | RNVC: 9
6600 PL FN 2 P/N 6603-1-999-000: RNCC: 5 | RNVC: 2

10 Jun 2008

3040-01-564-3297
Counterbalance Weight

015643297
P70072-2C: RNCC: 3 | RNVC: 2
P70072-2C: RNCC: 5 | RNVC: 9

12 Jun 2008

3040-01-564-2564
Straight Shaft

015642564
6606-999-000: RNCC: 3 | RNVC: 2
7906 PL FN 11: RNCC: 5 | RNVC: 2
6606-188-000: RNCC: 5 | RNVC: 9

10 Jun 2008

3040-01-564-5282
Shouldered Shaft Assembly

015645282
151-5966: RNCC: 3 | RNVC: 2
14KP161: RNCC: 5 | RNVC: 2
14KP161: RNCC: 5 | RNVC: 9

19 Jun 2008

3040-01-564-6496
Breather

015646496
40-55-0001: RNCC: 3 | RNVC: 9
40-55-0001: RNCC: 5 | RNVC: 2

24 Jun 2008

3040-01-564-7878
Rotating Shaft Eye Bracket

015647878
22KP124: RNCC: 3 | RNVC: 2
12508447: RNCC: 5 | RNVC: 2
22KP124: RNCC: 5 | RNVC: 9

27 Jun 2008

3040-01-564-6626
Manual Control Lever

015646626
22KP131: RNCC: 3 | RNVC: 2
12508458: RNCC: 5 | RNVC: 2
22KP131: RNCC: 5 | RNVC: 9

24 Jun 2008

3040-01-565-1221
Shoe Type Brake

015651221
3854812: RNCC: 3 | RNVC: 2
3854812: RNCC: 5 | RNVC: 9
K045528: RNCC: 5 | RNVC: 9
K045528: RNCC: 5 | RNVC: 9

14 Jul 2008

3040-01-565-9124
Shouldered Shaft

015659124
157D4015: RNCC: 3 | RNVC: 2

12 Aug 2008

3040-01-565-9025
Shouldered Shaft Assembly

015659025
IM-LCS1-113: RNCC: 3 | RNVC: 2

12 Aug 2008

3040-01-566-2558
Rigid Connecting Link

015662558
3713940: RNCC: 3 | RNVC: 2
3713940: RNCC: 3 | RNVC: 9

26 Aug 2008

3040-01-566-5605
Linear Actuating Cylinder

015665605
3261-A-1067: RNCC: 3 | RNVC: 2
1696245C91: RNCC: 5 | RNVC: 2

4 Sep 2008

3040-01-566-0594
Rigid Connecting Link

015660594
14KP974: RNCC: 3 | RNVC: 2
ML9-11.38: RNCC: 5 | RNVC: 2
ML9-11.38: RNCC: 5 | RNVC: 2
14KP974: RNCC: 5 | RNVC: 9

19 Aug 2008

3040-01-566-6896
Housing Adapter

015666896
003014-53: RNCC: 3 | RNVC: 2
3633136: RNCC: 5 | RNVC: 2
3633136: RNCC: 7 | RNVC: 9

8 Sep 2008

3040-01-567-1215
Cylinder Support

015671215
3683190C91: RNCC: 3 | RNVC: 2
3683190C91L: RNCC: 5 | RNVC: 9

18 Sep 2008

3040-01-567-1220
Cylinder Support

015671220
3683188C91: RNCC: 3 | RNVC: 2
3683188C91L: RNCC: 5 | RNVC: 9

18 Sep 2008

3040-01-566-8242
Linear Actuating Cylinder Assembly

015668242
MIL-001-067: RNCC: 3 | RNVC: 2

11 Sep 2008

3040-01-567-3382
Shouldered Shaft

015673382
87659406: RNCC: 3 | RNVC: 2

24 Sep 2008

3040-01-567-5287
Tension Spring Assembly

015675287
R505543: RNCC: 3 | RNVC: 2

30 Sep 2008

3040-01-567-6711
Ball Joint

015676711
T99520021801: RNCC: 3 | RNVC: 2
T99520021801: RNCC: 3 | RNVC: 9

2 Oct 2008

3040-01-568-4481
Shaft Collar

015684481
MHSH-R12U: RNCC: 3 | RNVC: 2
MHSH-R12R: RNCC: 3 | RNVC: 9
12422433-001: RNCC: 5 | RNVC: 9
12422433: RNCC: 7 | RNVC: 2

30 Oct 2008

3040-01-568-4535
Spur Gearshaft

015684535
4632-999-000: RNCC: 3 | RNVC: 2
4632-1-029-000: RNCC: 5 | RNVC: 9
4600PL FIND NO 3: RNCC: 5 | RNVC: 9

30 Oct 2008

3040-01-568-4811
Spur Gearshaft

015684811
4530-029-000: RNCC: 3 | RNVC: 2
4600PL FIND NO 9: RNCC: 5 | RNVC: 2

31 Oct 2008

3040-01-568-6208
Fan Drive Mounting

015686208
999536: RNCC: 3 | RNVC: 2
HOR4062600S: RNCC: 5 | RNVC: 9
HOR4062600S: RNCC: 5 | RNVC: 9

4 Nov 2008

3040-01-568-1415
Rigid Connecting Link

015681415
74A410683-1003: RNCC: 3 | RNVC: 2
74A410683-1003: RNCC: 5 | RNVC: 2
74A410683-1003: RNCC: 5 | RNVC: 2
74A410683-1003: RNCC: 5 | RNVC: 2
10369404: RNCC: 6 | RNVC: 9

21 Oct 2008

3040-01-569-3038
Linear Actuating Cylinder Cap

015693038
13017509: RNCC: 3 | RNVC: 2

25 Nov 2008

3040-01-569-9341
Counterbalance Weight

015699341
4821501: RNCC: 3 | RNVC: 2

11 Dec 2008

3040-01-570-4253
Door Actuator

015704253
APC30210-001: RNCC: 3 | RNVC: 2
APC30210-001: RNCC: 5 | RNVC: 2

30 Dec 2008

3040-01-570-6542
Rigid Connecting Link

015706542
CB-9-BR3902: RNCC: 3 | RNVC: 2
BR3902: RNCC: 3 | RNVC: 9
12503750: RNCC: D | RNVC: 9

8 Jan 2009

3040-01-571-1019
Rigid Connecting Link

015711019
65C18551-521: RNCC: 3 | RNVC: 2
65C18551-521: RNCC: 5 | RNVC: 2
65C18551-521: RNCC: 5 | RNVC: 9
65C18551-521: RNCC: 5 | RNVC: 9

23 Jan 2009

3040-01-571-0145
Straight Shaft

015710145
R0069335: RNCC: 3 | RNVC: 2
R0069335: RNCC: 5 | RNVC: 2
R0069335-0102: RNCC: D | RNVC: 9

22 Jan 2009

3040-01-572-2227
Pm Pinion Gear

015722227
48283: RNCC: 3 | RNVC: 2

4 Mar 2009

3040-01-572-9639
Shaft Collar

015729639
754-7286268-A1: RNCC: 3 | RNVC: 2
H553-1506-A1: RNCC: 5 | RNVC: 2

1 Apr 2009

3040-01-573-1072
Counterbalance Weight

015731072
23071999-7: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-572-7365
Linear Actuating Cylinder Piston Rod

015727365
8M0125869: RNCC: 3 | RNVC: 2
647-822373A09: RNCC: 5 | RNVC: 9

24 Mar 2009

3040-01-574-3572
Straight Shaft

015743572
8166323: RNCC: 3 | RNVC: 2

27 May 2009

3040-01-573-9787
Straight Shaft

015739787
563-7070228-43: RNCC: 3 | RNVC: 2
H696-1604-43: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-573-8836
Shouldered Shaft

015738836
22KP935: RNCC: 1 | RNVC: 2
N7187: RNCC: 3 | RNVC: 2

7 May 2009

3040-01-573-7466
Control Cable Assembly

015737466
60180-ZY6-003: RNCC: 3 | RNVC: 9

4 May 2009

3040-01-575-3118
Worm Shaft

015753118
5405-2-145-000: RNCC: 3 | RNVC: 2
5400PL FIND NO 21/5400-3-999-000: RNCC: 5 | RNVC: 2

26 Jun 2009

3040-01-575-5765
Linear Actuating Cylinder Assembly

015755765
3.25BC4MA2US14AX6.000: RNCC: 3 | RNVC: 2

8 Jul 2009

3040-01-575-5978
Treadle Cover

015755978
WIL 131386: RNCC: 3 | RNVC: 2

8 Jul 2009

3040-01-575-6356
Control Cam

015756356
DDE R23532937: RNCC: 3 | RNVC: 2
DDE 23532937: RNCC: 3 | RNVC: 9
23532937: RNCC: D | RNVC: 9

10 Jul 2009

3040-01-575-5757
Nonaircraft Mechanical Actuator

015755757
MIL-16925-R-23: RNCC: 3 | RNVC: 2
16906-58R: RNCC: 3 | RNVC: 9
12505996-002: RNCC: 7 | RNVC: 2

8 Jul 2009

3040-01-576-1914
Rigid Connecting Link

015761914
350622: RNCC: 3 | RNVC: 2
ZB0350622: RNCC: 5 | RNVC: 2

23 Jul 2009

3040-01-576-2718
Manual Control Lever

015762718
5006419: RNCC: 3 | RNVC: 2

27 Jul 2009

3040-01-576-2716
Control Cam

015762716
5005239: RNCC: 3 | RNVC: 2

27 Jul 2009

3040-01-578-9567
Body Hub

015789567
6578689: RNCC: 3 | RNVC: 2

26 Oct 2009

3040-01-579-8395
Shouldered Shaft

015798395
246-3130: RNCC: 3 | RNVC: 2
14KP886: RNCC: 5 | RNVC: 2

24 Nov 2009

3040-01-579-8915
Manual Control Lever

015798915
3563608: RNCC: 3 | RNVC: 2
3085204: RNCC: 3 | RNVC: 9

27 Nov 2009

3040-01-581-2046
Hydraulic Accumulator

015812046
24-49643: RNCC: 3 | RNVC: 1
21-19878 FIND NO 12: RNCC: 5 | RNVC: 1
21-19878 FIND NO 12CP: RNCC: 5 | RNVC: 2
24-49643CP: RNCC: 5 | RNVC: 2

8 Jan 2010

3040-01-581-6739
Push-Pull Control Assembly

015816739
6620465-1: RNCC: 3 | RNVC: 2
10340086: RNCC: 6 | RNVC: 9

25 Jan 2010

3040-01-581-8480
Rotary Actuating Cylinder Assembly

015818480
1310 0345 82: RNCC: 3 | RNVC: 2

29 Jan 2010

3040-01-581-9081
Shouldered Shaft

015819081
0351179: RNCC: 3 | RNVC: 2

1 Feb 2010

3040-01-583-2619
Linear Actuating Cylinder

015832619
MVG75-1088: RNCC: 3 | RNVC: 2
22KP408: RNCC: 5 | RNVC: 1

22 Mar 2010

3040-01-583-7420
Shouldered Shaft

015837420
24530: RNCC: 3 | RNVC: 2
24530: RNCC: 5 | RNVC: 1

5 Apr 2010

3040-01-584-4511
Remote Control Lever

015844511
3792628C1: RNCC: 3 | RNVC: 2
69081-026: RNCC: C | RNVC: 1

27 Apr 2010

3040-01-584-4186
Controllable Swashplate

015844186
2050565: RNCC: 3 | RNVC: 2

26 Apr 2010

3040-01-585-1091
Cylinder Support

015851091
4369619: RNCC: 3 | RNVC: 2

17 May 2010

3040-01-588-3446
Shouldered Shaft

015883446
41010959-180: RNCC: 3 | RNVC: 2

14 Sep 2010

3040-01-590-4747
Rigid Connecting Link

015904747
6-51857-15: RNCC: 3 | RNVC: 2

7 Dec 2010

3040-01-588-7400
Rigid Connecting Link

015887400
6445639-01M1: RNCC: 3 | RNVC: 2
6445639-01M1: RNCC: 3 | RNVC: 2
6445639-01M1: RNCC: 3 | RNVC: 9
6445639-01M1: RNCC: 5 | RNVC: 2
6445639: RNCC: D | RNVC: 9

30 Sep 2010

3040-01-589-2530
Nonaircraft Mechanical Actuator

015892530
D24-21B5-06-402: RNCC: 3 | RNVC: 2
R0102857: RNCC: 5 | RNVC: 2
R0102857: RNCC: 7 | RNVC: 2
R0102857-0301: RNCC: D | RNVC: 9

22 Oct 2010

3040-01-591-7312
Mechanical Drive Housing

015917312
3180738-4: RNCC: 3 | RNVC: 2

7 Feb 2011

3040-01-592-6979
Rigid Connecting Link

015926979
879150A34: RNCC: 3 | RNVC: 2

16 Mar 2011

3040-01-592-6865
Spline Adapter

015926865
T00200-5083: RNCC: 3 | RNVC: 2
T00200-5083: RNCC: 3 | RNVC: 9

16 Mar 2011

3040-01-592-7341
Pull Out Piston

015927341
1J0366: RNCC: 3 | RNVC: 2

17 Mar 2011

3040-01-595-5783
Linear Actuating Cylinder Assembly

015955783
11-718: RNCC: 3 | RNVC: 2

2 May 2011

3040-01-595-7551
Linear Actuating Cylinder Assembly

015957551
CR75-6: RNCC: 3 | RNVC: 2

5 May 2011

3040-01-595-5791
Rigid Connecting Link

015955791
30-383: RNCC: 3 | RNVC: 2

2 May 2011

3040-01-596-1415
Control Cam

015961415
SYLC-2223: RNCC: 3 | RNVC: 2

12 May 2011

3040-01-595-9261
Straight Shaft

015959261
123908: RNCC: 3 | RNVC: 2
E-4737 REV A ITEM NO. 77: RNCC: 5 | RNVC: 2

6 May 2011

3040-01-597-1594
Linear Actuating Cylinder Assembly

015971594
1137701G: RNCC: 3 | RNVC: 2

31 May 2011

3040-01-596-4510
Mechanical Drive Housing

015964510
SYLC-1678: RNCC: 3 | RNVC: 2

17 May 2011

3040-01-597-2544
Mechanical Drive Housing

015972544
SYLC-1679: RNCC: 3 | RNVC: 2

3 Jun 2011

3040-01-597-5006
Rigid Connecting Link

015975006
0700-12712-40: RNCC: 3 | RNVC: 2

10 Jun 2011

3040-01-600-7233
Spline Adapter

016007233
03E-95413: RNCC: 3 | RNVC: 2

15 Dec 2011

3040-01-601-0938
Shouldered Shaft

016010938
52721044: RNCC: 3 | RNVC: 2
24KP274: RNCC: 5 | RNVC: 2
24KP274: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-7030
Flexible Drive Shaft

016017030
M365520027S: RNCC: 3 | RNVC: 2
28KP810: RNCC: 5 | RNVC: 2
M3655200275: RNCC: 5 | RNVC: 9
28KP810: RNCC: 5 | RNVC: 9

19 Jan 2012

3040-01-602-3147
Control Cam

016023147
42315-181: RNCC: 3 | RNVC: 2
42315-181: RNCC: 5 | RNVC: 9

28 Jan 2012

3040-01-602-0685
Spur Gearshaft

016020685
42315-63: RNCC: 3 | RNVC: 2
42315-63: RNCC: 5 | RNVC: 9

26 Jan 2012

3040-01-602-4929
Linear Actuating Cylinder Head

016024929
1U4010: RNCC: 3 | RNVC: 2

31 Jan 2012

3040-01-603-1223
Shaft Retaining Plate

016031223
803-7504731-18A-A: RNCC: 3 | RNVC: 2

23 Feb 2012

3040-01-604-4480
Linear Actuating Cylinder Assembly

016044480
898479A03: RNCC: 3 | RNVC: 2
898479A02: RNCC: 5 | RNVC: 9

5 Apr 2012

3040-01-605-4093
Rigid Connecting Link

016054093
347/20064: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-606-8751
Rigid Connecting Link

016068751
26-5124: RNCC: 3 | RNVC: 2

25 May 2012

3040-01-606-3083
Linear Actuating Cylinder Assembly

016063083
347029: RNCC: 3 | RNVC: 2
46552053: RNCC: 5 | RNVC: 2

16 May 2012

3040-01-607-1101
Linear Actuating Cylinder Cap

016071101
R8506195-SP102: RNCC: 3 | RNVC: 2
R8506195-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-541-4742
Manual Control Lever

015414742
29903-01A: RNCC: 3 | RNVC: 2
205101 ITEM 14: RNCC: 5 | RNVC: 2

28 Jun 2006

3040-01-543-8562
Shouldered Shaft

015438562
30295-1250-4: RNCC: 3 | RNVC: 2
30295-1250-4: RNCC: 5 | RNVC: 9

22 Sep 2006

3040-01-573-5672
Manual Control Lever Assembly

015735672
061475-105: RNCC: 3 | RNVC: 2
061475-105: RNCC: 5 | RNVC: 2

28 Apr 2009

3040-01-573-5720
Linear Actuating Cylinder

015735720
ABR206: RNCC: 3 | RNVC: 2
L1693-02-205 ITEM #7: RNCC: 5 | RNVC: 9
P1AL-06I1C-GS32: RNCC: 5 | RNVC: 9
P1AP-06I1E-GS32: RNCC: 5 | RNVC: 9

28 Apr 2009

3040-01-573-7651
Belt-Chain Tension Adjusting Device

015737651
14510-ZY6-003: RNCC: 3 | RNVC: 9

5 May 2009

3040-01-561-4072
Manual Control Lever

015614072
258-4045: RNCC: 3 | RNVC: 2

5 Mar 2008

3040-01-561-8226
Mechanical Drive Housing

015618226
880696A08: RNCC: 3 | RNVC: 2
880696A08: RNCC: 5 | RNVC: 2

19 Mar 2008

3040-01-562-0225
Shouldered Shaft

015620225
193881: RNCC: 3 | RNVC: 2
20866033: RNCC: 5 | RNVC: 1
20866004 FIND NO 2: RNCC: 5 | RNVC: 2

26 Mar 2008

3040-01-527-7363
Shouldered Shaft

015277363
107318-00: RNCC: 3 | RNVC: 2
107318-A1 ITEM 1: RNCC: 5 | RNVC: 2

15 Feb 2005

3040-01-528-2535
Shaft Retaining Plate

015282535
034-032-00: RNCC: 3 | RNVC: 2

8 Mar 2005

3040-01-528-3682
Shouldered Shaft

015283682
AT-LG-500-310: RNCC: 3 | RNVC: 2

10 Mar 2005

3040-01-527-7471
Rigid Connecting Link

015277471
11581492: RNCC: 3 | RNVC: 2

16 Feb 2005

3040-01-528-4266
Shouldered Shaft

015284266
P10384: RNCC: 3 | RNVC: 2

12 Mar 2005

3040-01-529-5127
Shouldered Shaft

015295127
6853521 ITEM NO. 2: RNCC: 3 | RNVC: 2
6853521: RNCC: D | RNVC: 9

20 Apr 2005

3040-01-529-7253
Body Hub

015297253
9901.0671: RNCC: 3 | RNVC: 2
KDF1604: RNCC: D | RNVC: 9

28 Apr 2005

3040-01-529-3330
Piston Ring Set

015293330
960145-95: RNCC: 3 | RNVC: 2

13 Apr 2005

3040-01-530-0299
Control Cam Assembly

015300299
2059AS738-01: RNCC: 3 | RNVC: 2
2059AS738-01: RNCC: 5 | RNVC: 2

12 May 2005

3040-01-530-8944
Straight Shaft

015308944
465-4464-2: RNCC: 3 | RNVC: 9
465-4464-2: RNCC: C | RNVC: 1

15 Jun 2005

3040-01-531-0817
Counterbalance Weight

015310817
9127M56P01: RNCC: 3 | RNVC: 2

21 Jun 2005

3040-01-532-0690
Remote Control Lever

015320690
000993-158: RNCC: 3 | RNVC: 2
000993-158: RNCC: 5 | RNVC: 2

27 Jul 2005

3040-01-532-5704
Manual Control Lever

015325704
B5-HRS: RNCC: 3 | RNVC: 2

12 Aug 2005

3040-01-534-7399
Ball Joint

015347399
EST250: RNCC: 3 | RNVC: 2

1 Nov 2005

3040-01-535-5152
Housing Adapter

015355152
01318300: RNCC: 3 | RNVC: 2

2 Dec 2005

3040-01-536-0854
Straight Shaft

015360854
38514-546 15010: RNCC: 3 | RNVC: 2
38514-546: RNCC: 5 | RNVC: 9
38514-546 05010: RNCC: 5 | RNVC: 9

20 Dec 2005

3040-01-536-2768
Control Cable Assembly

015362768
7335247: RNCC: 3 | RNVC: 2
7335247-1 AND 7335247-2: RNCC: 3 | RNVC: 2
7335247: RNCC: 3 | RNVC: 2
7335247-1: RNCC: 5 | RNVC: 2
7335247-2: RNCC: 5 | RNVC: 2

27 Dec 2005

3040-01-538-0338
Ball Joint

015380338
3479345: RNCC: 1 | RNVC: 2
HCOM-22TS-9: RNCC: 3 | RNVC: 2
3479345: RNCC: 5 | RNVC: 9

8 Mar 2006

3040-01-541-1129
Hydraulic Accumulator Cylinder

015411129
6602231: RNCC: 3 | RNVC: 2
5HB66: RNCC: 5 | RNVC: 2
5HB66: RNCC: 5 | RNVC: 9

15 Jun 2006

3040-01-541-4271
Clutch Arm

015414271
005182-07: RNCC: 3 | RNVC: 2

27 Jun 2006

3040-01-541-4732
Straight Shaft

015414732
005541: RNCC: 3 | RNVC: 2

28 Jun 2006

3040-01-541-8766
Shaft Retaining Plate

015418766
007416: RNCC: 3 | RNVC: 2

14 Jul 2006

3040-01-542-1907
Rotary Actuating Cylinder Assembly

015421907
M3113: RNCC: 3 | RNVC: 2
M2715: RNCC: 5 | RNVC: 9

26 Jul 2006

3040-01-542-3707
Mechanical Drive Housing Part

015423707
9775PE: RNCC: 3 | RNVC: 2

2 Aug 2006

3040-01-542-4926
Nonrotating Shaft Eye Bracket

015424926
803-6397269 DETAIL 142-A: RNCC: 3 | RNVC: 2
803-6397269 PC 196: RNCC: 5 | RNVC: 2
803-6397269 DETAIL 126-A: RNCC: 5 | RNVC: 9

8 Aug 2006

3040-01-542-8464
Rigid Connecting Link

015428464
F055223: RNCC: 3 | RNVC: 2
F053003 ITEM 5: RNCC: 5 | RNVC: 2

22 Aug 2006

3040-01-545-0796
Rigid Connecting Link

015450796
8728-004-00V: RNCC: 3 | RNVC: 2

1 Nov 2006

3040-01-545-0805
Rigid Connecting Link

015450805
8728-024-00L: RNCC: 3 | RNVC: 2

1 Nov 2006

3040-01-545-7392
Linear Actuating Cylinder Cap

015457392
594/14025: RNCC: 3 | RNVC: 2

24 Nov 2006

3040-01-546-1414
Remote Control Lever

015461414
20015301: RNCC: 3 | RNVC: 2
20015301: RNCC: 3 | RNVC: 9
IQAN-LSL-E0-DN-L2-S: RNCC: 5 | RNVC: 9

7 Dec 2006

3040-01-546-1725
Shouldered Shaft

015461725
112833: RNCC: 3 | RNVC: 2

7 Dec 2006

3040-01-547-0531
Spur Gearshaft

015470531
B5547: RNCC: 3 | RNVC: 2

11 Jan 2007

3040-01-547-0525
Spur Gearshaft

015470525
S055480004: RNCC: 3 | RNVC: 2
B5548: RNCC: 3 | RNVC: 9

11 Jan 2007

3040-01-546-5501
Linear Actuating Cylinder Piston Rod

015465501
590/40317: RNCC: 3 | RNVC: 2

20 Dec 2006

3040-01-546-7065
Mechanical Drive Housing

015467065
901-045-213-101: RNCC: 3 | RNVC: 2

28 Dec 2006

3040-01-548-2877
Linear Actuating Cylinder Assembly

015482877
16236003-1: RNCC: 3 | RNVC: 2
CHH4025C-16-MT2-41345-2-9-5: RNCC: 3 | RNVC: 9
16231000 FIND NO.6: RNCC: 5 | RNVC: 9
16236003-1: RNCC: 5 | RNVC: 9

16 Feb 2007

3040-01-548-2633
Mechanically Actuated Spindle

015482633
J16222040-1: RNCC: 3 | RNVC: 2
16221800 FIND NO.1: RNCC: 5 | RNVC: 2
16222040-1: RNCC: 5 | RNVC: 2
16221810 FIND NO.1: RNCC: 5 | RNVC: 9
16222040-1: RNCC: 5 | RNVC: 9

15 Feb 2007

3040-01-548-4238
Shouldered Shaft

015484238
N7415: RNCC: 3 | RNVC: 2
16KP871: RNCC: 5 | RNVC: 2
16KP871: RNCC: 5 | RNVC: 9

22 Feb 2007

3040-01-548-5517
Manual Control Lever

015485517
LSZ51P: RNCC: 3 | RNVC: 2
F056093 ITEM 34: RNCC: 5 | RNVC: 2
F064973 IT 12: RNCC: 5 | RNVC: 2
F059458: RNCC: 5 | RNVC: 2
LSZ51P: RNCC: 5 | RNVC: 9

27 Feb 2007

3040-01-549-0891
Rigid Connecting Link

015490891
837C10250-1: RNCC: 3 | RNVC: 9
837C10250-1: RNCC: C | RNVC: 1

12 Mar 2007

3040-01-549-1540
Pneumatic Actuator Cylinder Housing

015491540
ZTR30A: RNCC: 3 | RNVC: 2

13 Mar 2007

3040-01-549-1413
Linear Actuating Cylinder Piston Rod

015491413
196164A1: RNCC: 3 | RNVC: 2

13 Mar 2007

3040-01-549-1992
Worm Wheel Gearshaft

015491992
CL40MRSBML-C: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-7943
Rigid Connecting Link

015497943
347/00245: RNCC: 3 | RNVC: 2

29 Mar 2007

3040-01-549-4127
Rigid Connecting Link

015494127
347/00243: RNCC: 3 | RNVC: 2

20 Mar 2007

3040-01-550-5979
Transmission Fluid Cooler

015505979
412902: RNCC: 3 | RNVC: 2
412902: RNCC: 5 | RNVC: 2
412902: RNCC: 5 | RNVC: 9

24 Apr 2007

3040-01-551-9144
Straight Shaft

015519144
4F19311-101A: RNCC: 3 | RNVC: 2

31 May 2007

3040-01-551-6123
Spur Gearshaft

015516123
SS350R-13-895: RNCC: 3 | RNVC: 2
04323275 REV B: RNCC: 5 | RNVC: 2

22 May 2007

3040-01-552-5051
Rigid Connecting Link

015525051
HR-470-50: RNCC: 3 | RNVC: 9
HR-470-50: RNCC: C | RNVC: 1

14 Jun 2007

3040-01-558-5487
Pivot Shaft Assembly

015585487
12KP281: RNCC: 3 | RNVC: 2
12KP281: RNCC: 5 | RNVC: 9

14 Nov 2007

3040-01-558-7151
Pawl

015587151
9951.0029: RNCC: 3 | RNVC: 2

20 Nov 2007

3040-01-560-5902
Grease Cap

015605902
HU8P-GC-4000: RNCC: 3 | RNVC: 2

5 Feb 2008

3040-01-560-0306
Remote Control Lever

015600306
362455630: RNCC: 3 | RNVC: 2

14 Jan 2008

3040-01-561-3843
Housing Adapter

015613843
258-3319: RNCC: 3 | RNVC: 2

4 Mar 2008

3040-01-554-8800
Shouldered Shaft

015548800
GMHOD75Z200: RNCC: 3 | RNVC: 2

22 Aug 2007

3040-01-555-1360
Control Cable Assembly

015551360
18505908: RNCC: 3 | RNVC: 2
18505900 / PN-18505908: RNCC: 5 | RNVC: 9

30 Aug 2007

3040-01-555-8990
Shouldered Shaft Assembly

015558990
29536845: RNCC: 3 | RNVC: 2

18 Sep 2007

3040-01-562-6116
Friction Lining

015626116
572932-80: RNCC: 3 | RNVC: 2
580040-02 REF 28: RNCC: 5 | RNVC: 1
574535-81 REF 7: RNCC: 5 | RNVC: 1

14 Apr 2008

3040-01-563-2196
Shouldered Shaft

015632196
6035170: RNCC: 3 | RNVC: 2
6031733: RNCC: 5 | RNVC: 9

6 May 2008

3040-01-563-4393
Linear Actuating Cylinder Cap

015634393
8242896: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-563-4016
Shouldered Shaft Assembly

015634016
13017430: RNCC: 3 | RNVC: 2

9 May 2008

3040-01-563-5061
Straight Shaft

015635061
87011A0630-1: RNCC: 3 | RNVC: 2
87011A0630-1: RNCC: 3 | RNVC: 2
87011A0630-1: RNCC: 5 | RNVC: 9

13 May 2008

3040-01-563-6234
Linear Actuating Cylinder Piston Rod

015636234
5262835: RNCC: 3 | RNVC: 2
5272598 REV G ITEM 20: RNCC: 5 | RNVC: 2

15 May 2008

3040-01-564-3126
Counterbalance Weight

015643126
P70072-2T: RNCC: 3 | RNVC: 2
P70072-2T: RNCC: 5 | RNVC: 2
P70072-2T: RNCC: 5 | RNVC: 9

11 Jun 2008

3040-01-564-7914
Roller Chain Connecting And Offset Link Set

015647914
3685167C91: RNCC: 3 | RNVC: 2
3685167C1: RNCC: 5 | RNVC: 9
3685167C1L: RNCC: 5 | RNVC: 9

27 Jun 2008

3040-01-564-8351
Ball Joint Receptical

015648351
65-73-0005: RNCC: 3 | RNVC: 2
65-73-0005: RNCC: 3 | RNVC: 9

30 Jun 2008

3040-01-565-0759
Shouldered Shaft

015650759
4995082-003: RNCC: 3 | RNVC: 2

10 Jul 2008

3040-01-565-6484
Mechanically Actuated Spindle

015656484
FIG112-3: RNCC: 3 | RNVC: 2

1 Aug 2008

3040-01-566-9782
Shaft Idler

015669782
2061-AA3-002: RNCC: 3 | RNVC: 2
2061-AA3: RNCC: D | RNVC: 9

15 Sep 2008

3040-01-567-3553
Push-Pull Control Assembly

015673553
UFLMC0X36: RNCC: 3 | RNVC: 9
216-MC0X36: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-567-4711
Rigid Connecting Link

015674711
724S3847-101: RNCC: 3 | RNVC: 2

26 Sep 2008

3040-01-568-2235
Shouldered Shaft

015682235
3305AS1542-1: RNCC: 3 | RNVC: 2
3305AS1579 FIND 1: RNCC: 5 | RNVC: 2

23 Oct 2008

3040-01-568-1066
Shouldered Axle

015681066
6070083-CV42: RNCC: 3 | RNVC: 2

21 Oct 2008

3040-01-568-5989
Shouldered Shaft

015685989
3689080C2: RNCC: 3 | RNVC: 2
3689080C2L: RNCC: 5 | RNVC: 9
3689080C1L: RNCC: 5 | RNVC: 9

4 Nov 2008

3040-01-567-3531
Push-Pull Control Assembly

015673531
UFLMC0X28: RNCC: 3 | RNVC: 9
216-MC0X28: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-570-9639
Nonaircraft Mechanical Actuator

015709639
12505998: RNCC: 1 | RNVC: 2
16913-23: RNCC: 3 | RNVC: 2
16913: RNCC: 5 | RNVC: 9

21 Jan 2009

3040-01-571-1250
Linear Actuating Cylinder Cap

015711250
13017352: RNCC: 3 | RNVC: 2

23 Jan 2009

3040-01-572-5053
Remote Control Lever

015725053
29542692: RNCC: 3 | RNVC: 2
0744940: RNCC: 5 | RNVC: 2
165614: RNCC: 5 | RNVC: 2

12 Mar 2009

3040-01-572-3112
Control Cable Assembly

015723112
F079438: RNCC: 3 | RNVC: 2
F079453 ITEM 8: RNCC: 5 | RNVC: 2

6 Mar 2009

3040-01-573-5758
Shouldered Shaft

015735758
111956701: RNCC: 3 | RNVC: 9
111956701: RNCC: 5 | RNVC: 2

28 Apr 2009

3040-01-573-7482
Shouldered Shaft

015737482
24310-ZY6-710: RNCC: 3 | RNVC: 9

4 May 2009

3040-01-573-2490
Rigid Connecting Link

015732490
4299898: RNCC: 3 | RNVC: 2
4299898: RNCC: 5 | RNVC: 2

14 Apr 2009

3040-01-574-8808
Extension Shaft

015748808
M22-DZ-R-X0: RNCC: 3 | RNVC: 2
E22MRL: RNCC: 5 | RNVC: 9

12 Jun 2009

3040-01-574-1618
Rotary Actuating Cylinder Assembly

015741618
5007117: RNCC: 3 | RNVC: 2
5007117: RNCC: 5 | RNVC: 9

18 May 2009

3040-01-575-6502
Brake Drum

015756502
GUN 3687X: RNCC: 3 | RNVC: 2

10 Jul 2009

3040-01-576-2182
Rigid Connecting Link

015762182
1308M32G02: RNCC: 3 | RNVC: 2
1308M32G02: RNCC: 5 | RNVC: 2

23 Jul 2009

3040-01-576-6703
Rigid Connecting Link

015766703
A05-27895-000: RNCC: 3 | RNVC: 2
A05-27895: RNCC: D | RNVC: 9

11 Aug 2009

3040-01-577-2674
Rigid Connecting Link

015772674
1523895: RNCC: 3 | RNVC: 2

1 Sep 2009

3040-01-577-5671
Multiple Gears Gearshaft

015775671
29556458: RNCC: 3 | RNVC: 2
29556458: RNCC: 5 | RNVC: 2
29527781: RNCC: 5 | RNVC: 9

11 Sep 2009

3040-01-578-4239
Shaft Collar

015784239
MBCS13331: RNCC: 3 | RNVC: 2

6 Oct 2009

3040-01-578-3679
Planetary Gears Carrier

015783679
29530468: RNCC: 3 | RNVC: 2

2 Oct 2009

3040-01-581-0081
Piston Ring

015810081
B101514: RNCC: 3 | RNVC: 2
C105229 FIND 7: RNCC: 5 | RNVC: 2

4 Jan 2010

3040-01-583-8957
Shouldered Shaft

015838957
449-040-118-101: RNCC: 3 | RNVC: 2

9 Apr 2010

3040-01-584-4899
Straight Shaft

015844899
1003910: RNCC: 3 | RNVC: 2
1003910: RNCC: 3 | RNVC: 9
1003910T: RNCC: 5 | RNVC: 9

27 Apr 2010

3040-01-584-9249
Rigid Connecting Link

015849249
6443898-01M1: RNCC: 3 | RNVC: 2
6443898-01M1: RNCC: 3 | RNVC: 9
6443898-01M1: RNCC: 5 | RNVC: 2
6443898: RNCC: D | RNVC: 9

11 May 2010

3040-01-585-7943
Pawl

015857943
JA20121: RNCC: 3 | RNVC: 2

7 Jun 2010

3040-01-586-3659
Shaft Collar

015863659
32957524: RNCC: 3 | RNVC: 2

28 Jun 2010

3040-01-586-7506
Tension Spring Assembly

015867506
S11406-S: RNCC: 3 | RNVC: 9
S11406-S: RNCC: 5 | RNVC: 2

13 Jul 2010

3040-01-587-3480
Rigid Connecting Link

015873480
GS-5253: RNCC: 3 | RNVC: 2

3 Aug 2010

3040-01-589-0107
Linear Actuating Cylinder Assembly

015890107
45AF014: RNCC: 3 | RNVC: 2

14 Oct 2010

3040-01-589-4127
Control Cam

015894127
12521194: RNCC: 3 | RNVC: 2

25 Oct 2010

3040-01-591-3196
Shouldered Axle

015913196
074-07734-000: RNCC: 3 | RNVC: 2
074-07734-000: RNCC: 3 | RNVC: 9
333-D-7610ITEM18: RNCC: 5 | RNVC: 2

20 Jan 2011

3040-01-592-3259
Straight Shaft Assembly

015923259
4026AS840-1: RNCC: 3 | RNVC: 2
6408-S3-1-3: RNCC: 5 | RNVC: 9

2 Mar 2011

3040-01-592-7334
Rigid Connecting Link

015927334
1119AS124: RNCC: 3 | RNVC: 2

17 Mar 2011

3040-01-592-2602
Shaft Collar

015922602
6436K760: RNCC: 3 | RNVC: 2
10010548: RNCC: 7 | RNVC: 2

1 Mar 2011

3040-01-592-6035
Straight Shaft

015926035
CAU11939: RNCC: 1 | RNVC: 2
410-2158-C: RNCC: 3 | RNVC: 2
CAU11939: RNCC: 5 | RNVC: 2

14 Mar 2011

3040-01-592-8841
Manual Control Lever

015928841
3922AS124-2: RNCC: 3 | RNVC: 2
DV1745-016-2 L/H: RNCC: 5 | RNVC: 2

25 Mar 2011

3040-01-593-2119
Rigid Connecting Link

015932119
1590M22P01: RNCC: 3 | RNVC: 2

5 Apr 2011

3040-01-595-4625
Pivot Shaft Assembly

015954625
9720-276: RNCC: 3 | RNVC: 2

28 Apr 2011

3040-01-596-0278
Shouldered Axle

015960278
7548088-22: RNCC: 3 | RNVC: 2

10 May 2011

3040-01-596-0538
Straight Shaft

015960538
100-31-621: RNCC: 3 | RNVC: 2
1003DA-2-621 ITEM 3: RNCC: 5 | RNVC: 2

11 May 2011

3040-01-596-0616
Shaft Retaining Plate

015960616
M3992: RNCC: 3 | RNVC: 2
20201-01 PC 6: RNCC: 5 | RNVC: 1

11 May 2011

3040-01-596-6446
Flexible Drive Shaft

015966446
1800-09654: RNCC: 3 | RNVC: 2
1809019-20/4.3.1 ITEM 3: RNCC: 5 | RNVC: 2
1809019-20 / 4.3.1 ITEM 3: RNCC: 5 | RNVC: 9
1800-09654: RNCC: 5 | RNVC: 9

20 May 2011

3040-01-596-4500
Manual Control Lever Assembly

015964500
OP9002EY: RNCC: 3 | RNVC: 2

17 May 2011

3040-01-597-3395
Pneumatic Accumulator

015973395
0700-12719-27: RNCC: 3 | RNVC: 2

7 Jun 2011

3040-01-598-7832
Rigid Connecting Link

015987832
10014711: RNCC: 3 | RNVC: 2

26 Aug 2011

3040-01-598-8469
Body Hub

015988469
884011088A02: RNCC: 3 | RNVC: 2

30 Aug 2011

3040-01-599-1995
Piston Ring

015991995
853237: RNCC: 3 | RNVC: 2

15 Sep 2011

3040-01-599-1381
Retaining Plate Nrp

015991381
74A400705-2003: RNCC: 3 | RNVC: 2

13 Sep 2011

3040-01-600-4839
Linear Actuating Cylinder Head

016004839
622262-2L: RNCC: 3 | RNVC: 2

2 Dec 2011

3040-01-601-0945
Shouldered Shaft

016010945
52720821: RNCC: 3 | RNVC: 2
24KP270: RNCC: 5 | RNVC: 2
24KP270: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-1967
Rigid Connecting Link

016011967
7-511527009-101: RNCC: 3 | RNVC: 2

12 Jan 2012

3040-01-602-4030
Torsion Axle

016024030
AXTDF-07-66-00-AX: RNCC: 3 | RNVC: 2

30 Jan 2012

3040-01-602-9175
Housing Adapter

016029175
13602: RNCC: 3 | RNVC: 2
13602: RNCC: 3 | RNVC: 9
26KP421: RNCC: 5 | RNVC: 2
26KP421: RNCC: 5 | RNVC: 9

13 Feb 2012

3040-01-602-5335
Hub And Drum Assembly

016025335
008-277-71: RNCC: 3 | RNVC: 9
DX008-277-71: RNCC: 5 | RNVC: 2

31 Jan 2012

3040-01-602-9893
Spec Hub Assembly

016029893
008-277-05: RNCC: 3 | RNVC: 9
DX008-277-05: RNCC: 5 | RNVC: 2

15 Feb 2012

3040-01-603-9240
Rigid Connecting Link

016039240
65209-03085-042: RNCC: 3 | RNVC: 2
65209-03085-042: RNCC: 5 | RNVC: 2

22 Mar 2012

3040-01-604-1891
Spur Gearshaft

016041891
14003021: RNCC: 3 | RNVC: 9
14003016 ITEM NO. 5: RNCC: 5 | RNVC: 9
14003021: RNCC: C | RNVC: 1
14003016 ITEM NO. 5: RNCC: C | RNVC: 1
14003016: RNCC: D | RNVC: 9

29 Mar 2012

3040-01-604-5724
Push-Pull Control Assembly

016045724
KRF3000-35-THT: RNCC: 3 | RNVC: 2

9 Apr 2012

3040-01-604-9509
Housing Adapter

016049509
878584Q1: RNCC: 3 | RNVC: 2

13 Apr 2012

3040-01-605-6258
Straight Shaft

016056258
08002183: RNCC: 3 | RNVC: 2
PL08002167 REV L FIND# 10: RNCC: 5 | RNVC: 2

23 Apr 2012

3040-01-605-8545
Housing Adapter

016058545
HA5419: RNCC: 3 | RNVC: 2

26 Apr 2012

3040-01-606-0315
Shouldered Shaft

016060315
CL-6-HRPK-L: RNCC: 3 | RNVC: 2
030-001875-0001: RNCC: 7 | RNVC: 2
030-001875: RNCC: D | RNVC: 9

3 May 2012

3040-01-606-6166
Worm Shaft

016066166
00-916961: RNCC: 3 | RNVC: 2
PL-58130 IT 30: RNCC: 5 | RNVC: 2

22 May 2012

3040-01-607-0787
Plain Shoeassy

016070787
20-8593-1: RNCC: 3 | RNVC: 2
478596-002: RNCC: 5 | RNVC: 2

30 May 2012

3040-01-608-0246
Shaft Collar

016080246
B18180006: RNCC: 3 | RNVC: 2
B18180006: RNCC: 3 | RNVC: 9

20 Jun 2012

3040-01-608-5774
Push-Pull Control Assembly

016085774
40-132-TTL-BH-3: RNCC: 3 | RNVC: 2
F151503 REV A ITEM NO.: RNCC: D | RNVC: 9

3 Jul 2012

3040-01-526-9662
Body Hub

015269662
C33590: RNCC: 3 | RNVC: 2

13 Jan 2005

3040-01-527-2211
Shouldered Shaft Assembly

015272211
5-66-7321-00: RNCC: 3 | RNVC: 2
8-078-921-00 ITEM 8: RNCC: 5 | RNVC: 1

25 Jan 2005

3040-01-527-6861
Shouldered Shaft

015276861
11581502: RNCC: 3 | RNVC: 2

11 Feb 2005

3040-01-528-1577
Rigid Connecting Link

015281577
APC30201: RNCC: 3 | RNVC: 2
APC30201: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-528-0523
Housing Adapter

015280523
17-2-0232-1: RNCC: 3 | RNVC: 2
2116: RNCC: 5 | RNVC: 2

1 Mar 2005

3040-01-529-2939
Straight Shaft

015292939
752-7068428-70: RNCC: 3 | RNVC: 2
H8320350A-2A: RNCC: 5 | RNVC: 2
H832-0350-70: RNCC: 5 | RNVC: 9

12 Apr 2005

3040-01-529-9549
Straight Shaft

015299549
3417765: RNCC: 3 | RNVC: 2
3417765: RNCC: 5 | RNVC: 2

10 May 2005

3040-01-530-2979
Mechanical Drive Housing

015302979
DBA100: RNCC: 3 | RNVC: 2

20 May 2005

NSN 3040-01-530-4353 015304353 COOLER,FLUID,TRANSMISSION

3040-01-530-4353
Transmission Fluid Cooler

015304353
3N-8888: RNCC: 3 | RNVC: 2

26 May 2005

3040-01-530-6834
Straight Shaft

015306834
7550138-9: RNCC: 3 | RNVC: 2
7550079-22: RNCC: 5 | RNVC: 1
G545-4102-22: RNCC: 5 | RNVC: 1
G545-4105-9: RNCC: 5 | RNVC: 2
7550138-9: RNCC: 5 | RNVC: 2

8 Jun 2005

3040-01-531-6779
Rigid Connecting Link

015316779
111526: RNCC: 3 | RNVC: 2

19 Jul 2005

3040-01-531-4386
Ball Joint

015314386
6058K25: RNCC: 3 | RNVC: 2

8 Jul 2005

3040-01-532-3296
Linear Actuating Cylinder Assembly

015323296
496-3750: RNCC: 3 | RNVC: 2
496-3750: RNCC: 5 | RNVC: 2

4 Aug 2005

3040-01-532-6610
Extension Shaft

015326610
111408-1: RNCC: 3 | RNVC: 2

16 Aug 2005

3040-01-533-4099
Rigid Connecting Link

015334099
563-6404331-1: RNCC: 3 | RNVC: 2
14564973: RNCC: 5 | RNVC: 2

14 Sep 2005

3040-01-533-8882
Ball Joint

015338882
180-2232: RNCC: 3 | RNVC: 9
180-2232: RNCC: 5 | RNVC: 2
449-9328: RNCC: 5 | RNVC: 9

29 Sep 2005

3040-01-534-7344
Control Cam

015347344
VLRE-1.50-4: RNCC: 3 | RNVC: 2

1 Nov 2005

3040-01-536-4363
Shouldered Shaft

015364363
12484186: RNCC: 3 | RNVC: 2

4 Jan 2006

3040-01-535-5682
Counterbalance Weight

015355682
660509680: RNCC: 3 | RNVC: 2

5 Dec 2005

3040-01-536-6193
Straight Shaft

015366193
12446530: RNCC: 3 | RNVC: 2

10 Jan 2006

3040-01-538-3074
Shaft Collar

015383074
1632909: RNCC: 3 | RNVC: 2
249336: RNCC: 5 | RNVC: 9
256383: RNCC: 5 | RNVC: 9

17 Mar 2006

3040-01-539-3924
Detent Plate

015393924
12478262: RNCC: 3 | RNVC: 2

20 Apr 2006

3040-01-539-1907
Linear Actuating Cylinder Cap

015391907
9239762778: RNCC: 3 | RNVC: 2
923976.2778: RNCC: 5 | RNVC: 2
CV187247: RNCC: 5 | RNVC: 2
923976.2778: RNCC: 5 | RNVC: 2

13 Apr 2006

3040-01-539-8892
Straight Shaft

015398892
167-7066800-75: RNCC: 3 | RNVC: 2
H547-1803-75: RNCC: 5 | RNVC: 2

3 May 2006

3040-01-540-3475
Nonaircraft Mechanical Actuator

015403475
12486571: RNCC: 3 | RNVC: 2

16 May 2006

3040-01-540-3500
Shouldered Shaft Assembly

015403500
5000615: RNCC: 3 | RNVC: 2
5000615: RNCC: 3 | RNVC: 9
2012061: RNCC: 5 | RNVC: 9

16 May 2006

3040-01-539-9344
Linear Actuating Cylinder Assembly Parts Kit

015399344
AH149813: RNCC: 3 | RNVC: 2
AH149813: RNCC: 5 | RNVC: 2
AH149813: RNCC: 5 | RNVC: 2
AH149813: RNCC: 5 | RNVC: 9
AH149813: RNCC: 5 | RNVC: 9

4 May 2006

3040-01-540-3736
Shouldered Shaft

015403736
0346004: RNCC: 3 | RNVC: 9

17 May 2006

3040-01-541-7295
Linear Actuating Cylinder Assembly

015417295
PMC-5608: RNCC: 3 | RNVC: 2
5HB78: RNCC: 5 | RNVC: 2
6602660: RNCC: 5 | RNVC: 2
5HB78: RNCC: 5 | RNVC: 9

10 Jul 2006

3040-01-541-9528
Straight Shaft

015419528
F056641: RNCC: 3 | RNVC: 2
F056433 ITEM 4: RNCC: 5 | RNVC: 2

18 Jul 2006

3040-01-542-4039
Rigid Connecting Link

015424039
12501510: RNCC: 3 | RNVC: 2

3 Aug 2006

3040-01-542-2690
Electrical Special Purpose Cable Assembly

015422690
200-04333-0324: RNCC: 3 | RNVC: 2

27 Jul 2006

3040-01-542-8475
Rigid Connecting Link

015428475
F055213: RNCC: 3 | RNVC: 2
F053003 ITEM 6: RNCC: 5 | RNVC: 2

22 Aug 2006

3040-01-545-0416
Linear Actuating Cylinder Piston Rod

015450416
590/40666: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-0426
Linear Actuating Cylinder Piston Rod

015450426
590/40669: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-2724
Straight Shaft

015452724
60 328-0122-2: RNCC: 3 | RNVC: 2
01-435-0093-5PC73: RNCC: 5 | RNVC: 2

7 Nov 2006

3040-01-545-2669
Linear Actuating Cylinder Assembly

015452669
333/E3599: RNCC: 3 | RNVC: 2
CV165711H: RNCC: 5 | RNVC: 2
347/21011: RNCC: 5 | RNVC: 9

7 Nov 2006

3040-01-546-1406
Multiple Gears Gearshaft

015461406
4633-029-000: RNCC: 3 | RNVC: 2
4600PL FIND NO 8: RNCC: 5 | RNVC: 9

7 Dec 2006

3040-01-546-4128
Filler Service Unit

015464128
061482-100: RNCC: 3 | RNVC: 2

14 Dec 2006

3040-01-546-0235
Body Hub

015460235
29543361: RNCC: 3 | RNVC: 2
9KP999: RNCC: 5 | RNVC: 2
29543361: RNCC: 5 | RNVC: 2
9KP999: RNCC: 5 | RNVC: 9

4 Dec 2006

3040-01-547-2877
Rigid Connecting Link

015472877
8728-011-00Z: RNCC: 3 | RNVC: 2

17 Jan 2007

3040-01-547-4170
Rigid Connecting Link

015474170
4C22133-101A: RNCC: 3 | RNVC: 2

19 Jan 2007

3040-01-547-8668
Control Cam

015478668
7575841-001: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-548-5501
Manual Control Lever

015485501
F068179: RNCC: 3 | RNVC: 2
F067983 IT 12: RNCC: 5 | RNVC: 2
F067993 IT 12: RNCC: 5 | RNVC: 2

27 Feb 2007

3040-01-548-2505
Pivot Shaft Assembly

015482505
16232055-1: RNCC: 3 | RNVC: 2
16232051 FIND NO.1: RNCC: 5 | RNVC: 9
16232055-1: RNCC: 5 | RNVC: 9
16232050 FIND NO.1: RNCC: 5 | RNVC: 9
16232050 FIND NO.1: RNCC: C | RNVC: 1
16232051 FIND NO.1: RNCC: C | RNVC: 1

15 Feb 2007

3040-01-549-2114
Worm Wheel Gearshaft

015492114
CL40MRSBML-D: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-3219
Manual Control Lever

015493219
335/07901: RNCC: 3 | RNVC: 2

16 Mar 2007

3040-01-549-2017
Worm Wheel Gearshaft

015492017
CL40FRSBML-B: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-7920
Rigid Connecting Link

015497920
347/00248: RNCC: 3 | RNVC: 2

29 Mar 2007

3040-01-549-6454
Rigid Connecting Link

015496454
347/00195: RNCC: 3 | RNVC: 2

27 Mar 2007

3040-01-550-5800
Multiple Gears Gearshaft

015505800
85413201540: RNCC: 3 | RNVC: 2

24 Apr 2007

3040-01-551-2725
Straight Shaft

015512725
5114-004: RNCC: 3 | RNVC: 2
5114-004-00350: RNCC: 5 | RNVC: 9

11 May 2007

3040-01-551-6078
Manual Control Lever

015516078
234-0774: RNCC: 3 | RNVC: 2
234-0774: RNCC: 5 | RNVC: 2

22 May 2007

3040-01-551-5990
Push-Pull Control Assembly

015515990
234-0732: RNCC: 3 | RNVC: 2
CV152061D: RNCC: 5 | RNVC: 2
234-0732: RNCC: 5 | RNVC: 2

22 May 2007

3040-01-552-0086
Counterbalance Weight

015520086
38150-09424-101: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-552-0088
Counterbalance Weight

015520088
38150-09424-110: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-553-4208
Rigid Connecting Link

015534208
72100-580: RNCC: 3 | RNVC: 2
4000512: RNCC: 5 | RNVC: 9
72100-580: RNCC: 5 | RNVC: 9
17QF 457P313: RNCC: 5 | RNVC: 9

16 Jul 2007

3040-01-558-6103
Mechanically Actuated Spindle

015586103
114853-000 POS 150/151: RNCC: 3 | RNVC: 2
115110-000 POS 150/151: RNCC: 5 | RNVC: 2

15 Nov 2007

3040-01-558-7556
Rigid Connecting Link

015587556
P41190: RNCC: 3 | RNVC: 2
P41190: RNCC: 3 | RNVC: 2
AMBK4-4063: RNCC: 5 | RNVC: 2
AMBK4-4063: RNCC: 5 | RNVC: 2
P41190: RNCC: 5 | RNVC: 2
P41190: RNCC: 5 | RNVC: 2
AMBK4-4063: RNCC: 5 | RNVC: 2

20 Nov 2007

3040-01-559-4801
Mechanical Drive Housing Part

015594801
527-5942038 PIECE 8: RNCC: 3 | RNVC: 2
1313-2 PIECE 8: RNCC: 5 | RNVC: 9

19 Dec 2007

3040-01-554-1296
Control Cable Assembly

015541296
174-LTT-2-74.75: RNCC: 3 | RNVC: 2
1386F95FIND15: RNCC: 5 | RNVC: 2

31 Jul 2007

3040-01-554-2563
Shouldered Shaft

015542563
123AMM42153-1: RNCC: 3 | RNVC: 2
123AMM42153-1: RNCC: 5 | RNVC: 9
123AMM42153-1: RNCC: 5 | RNVC: 9

2 Aug 2007

3040-01-554-4408
Brake Shoe

015544408
826759: RNCC: 3 | RNVC: 2
50076285: RNCC: 5 | RNVC: 2

9 Aug 2007

3040-01-555-4499
Rigid Connecting Link

015554499
901-301-022-111: RNCC: 3 | RNVC: 2
USCTR-002-111: RNCC: 5 | RNVC: 2

6 Sep 2007

3040-01-559-0339
Rigid Connecting Link

015590339
P40890: RNCC: 3 | RNVC: 2
P40890: RNCC: 3 | RNVC: 2
AMBK4-4062: RNCC: 5 | RNVC: 2
P40890: RNCC: 5 | RNVC: 2
P40890: RNCC: 5 | RNVC: 2
AMBK4-4062: RNCC: 5 | RNVC: 2
AMBK4-4062: RNCC: 5 | RNVC: 2

3 Dec 2007

3040-01-562-3665
Shouldered Shaft

015623665
52137-1004-1: RNCC: 3 | RNVC: 2
52136 FIND 13: RNCC: 5 | RNVC: 1

7 Apr 2008

3040-01-562-2126
Straight Shaft

015622126
AM0-0087: RNCC: 3 | RNVC: 2

2 Apr 2008

3040-01-563-4448
Body Hub

015634448
8242881-1: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-564-0924
Rigid Connecting Link

015640924
4006-5A: RNCC: 3 | RNVC: 2
803-6397268 PC 164: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-564-2311
Control Cam

015642311
16874-64-75: RNCC: 3 | RNVC: 2

10 Jun 2008

3040-01-564-4925
Counterbalance Weight

015644925
P70072-1T: RNCC: 1 | RNVC: 2
P70072-1T: RNCC: 3 | RNVC: 2
P70072-: RNCC: 5 | RNVC: 9

18 Jun 2008

3040-01-564-7922
Vehicular Components Bracket

015647922
3685169C1: RNCC: 3 | RNVC: 2
3685169C1L: RNCC: 5 | RNVC: 9

27 Jun 2008

3040-01-564-6463
Rigid Connecting Link

015646463
RD-3-7291-0P: RNCC: 3 | RNVC: 2
RD-3-7291-0: RNCC: 5 | RNVC: 9

24 Jun 2008

3040-01-564-9968
Ball Joint

015649968
0304677: RNCC: 3 | RNVC: 2
0304677: RNCC: 5 | RNVC: 9

8 Jul 2008

3040-01-565-2577
Rigid Connecting Link

015652577
39068-1: RNCC: 3 | RNVC: 2

17 Jul 2008

3040-01-565-7565
Rigid Connecting Link

015657565
B-090106X40TBDA: RNCC: 3 | RNVC: 2

6 Aug 2008

3040-01-566-1709
Pivot Shaft Assembly

015661709
105-200566-001: RNCC: 3 | RNVC: 2

22 Aug 2008

3040-01-566-6891
Linear Actuating Cylinder Assembly

015666891
MIL-001-080: RNCC: 3 | RNVC: 2

8 Sep 2008

3040-01-567-3529
Push-Pull Control Assembly

015673529
UFLMC0X26: RNCC: 3 | RNVC: 9
216-MC0X26: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-568-4000
Mechanical Drive Housing

015684000
YZ121051: RNCC: 3 | RNVC: 2
YZ121325: RNCC: 3 | RNVC: 9

29 Oct 2008

3040-01-568-1247
Inertia Damper

015681247
12505368-001: RNCC: 3 | RNVC: 2

21 Oct 2008

3040-01-570-0741
Rigid Connecting Link

015700741
136884: RNCC: 3 | RNVC: 2
136884: RNCC: 5 | RNVC: 9
136884: RNCC: 7 | RNVC: 2

16 Dec 2008

3040-01-570-5855
Body Hub

015705855
A8 333A4317: RNCC: 3 | RNVC: 2

7 Jan 2009

3040-01-570-7420
Mechanical Drive Housing

015707420
1HT178: RNCC: 3 | RNVC: 2
1HT178: RNCC: 5 | RNVC: 9
SA88210094: RNCC: C | RNVC: 1

13 Jan 2009

3040-01-570-7505
Straight Shaft

015707505
12506001-004: RNCC: 3 | RNVC: 2
12506001: RNCC: D | RNVC: 9

13 Jan 2009

3040-01-572-2455
Straight Shaft Assembly

015722455
4040301: RNCC: 3 | RNVC: 2

4 Mar 2009

3040-01-572-3441
Rigid Connecting Link

015723441
1900-43025-40: RNCC: 3 | RNVC: 2

9 Mar 2009

3040-01-572-3739
Pivot Shaft Assembly

015723739
154247: RNCC: 3 | RNVC: 2
1624442: RNCC: 5 | RNVC: 2
12491682: RNCC: D | RNVC: 9

10 Mar 2009

3040-01-573-1077
Counterbalance Weight

015731077
23071999-5: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-7833
Shaft Retaining Plate

015737833
24124-ZY6-000: RNCC: 3 | RNVC: 9

5 May 2009

3040-01-575-3347
Nonaircraft Mechanical Actuator

015753347
0511/15S731100: RNCC: 3 | RNVC: 2
0511 REV N AND PL 0511 REV G: RNCC: 5 | RNVC: 2

29 Jun 2009

3040-01-575-6352
Hub Cam Drive Gear

015756352
DDE 23524883: RNCC: 3 | RNVC: 2
23524883: RNCC: 5 | RNVC: 2
23524883: RNCC: D | RNVC: 9

10 Jul 2009

3040-01-576-4799
Shouldered Shaft Assembly

015764799
1D6004-5AEQ: RNCC: 3 | RNVC: 2

3 Aug 2009

3040-01-577-4976
Mechanical Drive Housing

015774976
3817500: RNCC: 3 | RNVC: 2
3817500: RNCC: 5 | RNVC: 9

9 Sep 2009

3040-01-577-9801
Nonaircraft Mechanical Actuator

015779801
R0094764: RNCC: 3 | RNVC: 2
R0094764: RNCC: 5 | RNVC: 2
R0094764-0300: RNCC: D | RNVC: 9

23 Sep 2009

3040-01-577-6141
Body Hub

015776141
2428863: RNCC: 3 | RNVC: 2

14 Sep 2009

3040-01-578-3123
Rigid Connecting Link

015783123
10007662: RNCC: 3 | RNVC: 2

1 Oct 2009

3040-01-578-6449
Shouldered Shaft

015786449
4102230-1: RNCC: 3 | RNVC: 2
4102230-1: RNCC: 5 | RNVC: 9

14 Oct 2009

3040-01-579-0127
Pedal Pad

015790127
HJFC-0007: RNCC: 3 | RNVC: 2

28 Oct 2009

3040-01-579-4844
Mechanical Drive Housing

015794844
5007686: RNCC: 3 | RNVC: 2
ZB5007686: RNCC: 5 | RNVC: 2

13 Nov 2009

3040-01-579-7806
Rigid Connecting Link

015797806
2-16877OH-56-75: RNCC: 3 | RNVC: 2
6439689-01M1: RNCC: 5 | RNVC: 2
12537520-1: RNCC: 7 | RNVC: 2
6439689-01M1: RNCC: 7 | RNVC: 2
6439689: RNCC: D | RNVC: 9
12537520: RNCC: D | RNVC: 9

23 Nov 2009

3040-01-579-6785
Swingarm Assembly

015796785
13021522: RNCC: 1 | RNVC: 2
M10-001-LAV: RNCC: 3 | RNVC: 2

19 Nov 2009

3040-01-579-9041
Linear Actuating Cylinder Piston

015799041
3796799: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-581-1069
Housing Adapter

015811069
200713051-01: RNCC: 3 | RNVC: 2
200713051: RNCC: D | RNVC: 9

6 Jan 2010

3040-01-581-1616
Shouldered Shaft

015811616
765338: RNCC: 3 | RNVC: 2

7 Jan 2010

3040-01-581-1624
Manual Control Lever

015811624
200713039-01: RNCC: 3 | RNVC: 2
200713039: RNCC: D | RNVC: 9

7 Jan 2010

3040-01-580-4387
Rigid Connecting Link

015804387
2721622: RNCC: 3 | RNVC: 2

15 Dec 2009

3040-01-581-6682
Machined Main Housing

015816682
6620258-1: RNCC: 3 | RNVC: 2

25 Jan 2010

3040-01-582-3412
Hub Clamp

015823412
S3600Y-J124: RNCC: 3 | RNVC: 2

17 Feb 2010

3040-01-582-5792
Housing Adapter

015825792
MT93-1324: RNCC: 3 | RNVC: 2
22KP281: RNCC: 7 | RNVC: 2

26 Feb 2010

3040-01-583-2763
Rigid Connecting Link

015832763
0312105969-00: RNCC: 3 | RNVC: 2
26KP372: RNCC: 7 | RNVC: 2

22 Mar 2010

3040-01-583-7427
Spur Gearshaft

015837427
24718: RNCC: 3 | RNVC: 2
24718: RNCC: 5 | RNVC: 1

5 Apr 2010

3040-01-584-1553
Control Cam

015841553
203221-1: RNCC: 3 | RNVC: 2
203221-1: RNCC: 3 | RNVC: 9

19 Apr 2010

3040-01-584-5627
Ball Joint

015845627
59915K272: RNCC: 3 | RNVC: 2

29 Apr 2010

3040-01-585-6199
Straight Shaft

015856199
449-040-119-101: RNCC: 3 | RNVC: 2

1 Jun 2010

3040-01-585-4430
Hub Clamp

015854430
3880610C1: RNCC: 3 | RNVC: 2
69158-000: RNCC: 5 | RNVC: 9

26 May 2010

3040-01-587-9788
Body Hub

015879788
9930.5703: RNCC: 3 | RNVC: 2
2DB26: RNCC: 5 | RNVC: 2
2DB26: RNCC: 5 | RNVC: 9

27 Aug 2010

3040-01-588-2086
Ballscrew Assembly

015882086
30295-3028: RNCC: 3 | RNVC: 2
40002467-001: RNCC: 5 | RNVC: 2
30295-3028: RNCC: 5 | RNVC: 9

7 Sep 2010

3040-01-589-2485
Shouldered Shaft

015892485
MBCS13168: RNCC: 3 | RNVC: 2
MBCS13168: RNCC: 5 | RNVC: 9

22 Oct 2010

3040-01-589-9898
Mechanical Drive Housing

015899898
04-20138: RNCC: 1 | RNVC: 2
119803-01500: RNCC: 3 | RNVC: 2
719803-01500: RNCC: 3 | RNVC: 2
119803-01500: RNCC: 5 | RNVC: 9
719803-01500: RNCC: 5 | RNVC: 9
04-20138: RNCC: D | RNVC: 9

10 Nov 2010

3040-01-590-1587
Straight Shaft Assembly

015901587
122728-1: RNCC: 3 | RNVC: 2

22 Nov 2010

3040-01-591-1704
Bell Crank

015911704
R0147355: RNCC: 3 | RNVC: 2
R0147355: RNCC: 5 | RNVC: 2
R0147355-0103: RNCC: D | RNVC: 9

13 Jan 2011

3040-01-591-1764
Shaft Collar

015911764
R190,707: RNCC: 3 | RNVC: 9
R190,707: RNCC: 5 | RNVC: 2

13 Jan 2011

3040-01-589-4909
Rigid Connecting Link

015894909
3671240C01003-7: RNCC: 3 | RNVC: 2
3671240C01003-7: RNCC: 3 | RNVC: 9

27 Oct 2010

3040-01-592-1444
Shouldered Shaft

015921444
6408-S3-1-10: RNCC: 3 | RNVC: 2

23 Feb 2011

3040-01-593-5457
Shaft Collar

015935457
764006: RNCC: 3 | RNVC: 2

11 Apr 2011

3040-01-593-0048
Straight Shaft

015930048
6563: RNCC: 3 | RNVC: 2
12478085: RNCC: 5 | RNVC: 2

31 Mar 2011

3040-01-595-9373
Shaft Collar

015959373
84001217-002: RNCC: 3 | RNVC: 2
84001217-002: RNCC: 5 | RNVC: 9

9 May 2011

3040-01-596-0294
Shaft Retaining Plate

015960294
M3978: RNCC: 3 | RNVC: 2
20201-01 PC 4: RNCC: 5 | RNVC: 1

10 May 2011

3040-01-596-1559
Hanger Shaft

015961559
12147-505: RNCC: 3 | RNVC: 2
207-8424619ITEM2: RNCC: D | RNVC: 9

13 May 2011

3040-01-596-3674
Control Cable Assembly

015963674
95255A224: RNCC: 3 | RNVC: 2

16 May 2011

3040-01-597-1148
Rigid Connecting Link

015971148
04-21076: RNCC: 3 | RNVC: 2

27 May 2011

3040-01-598-7159
Brake Band And Lining

015987159
DMD-2903: RNCC: 3 | RNVC: 2

23 Aug 2011

3040-01-598-8472
Ball Joint

015988472
R0071166: RNCC: 3 | RNVC: 2
R0071166: RNCC: 5 | RNVC: 2
R0071166-0301: RNCC: D | RNVC: 9

30 Aug 2011

3040-01-600-2630
Rigid Connecting Link

016002630
114210-14400: RNCC: 3 | RNVC: 2
114210-14400: RNCC: 3 | RNVC: 9

18 Nov 2011

3040-01-603-9773
Bell Crank

016039773
R0147356: RNCC: 3 | RNVC: 2
R0147356: RNCC: 5 | RNVC: 2
R0147356-0103: RNCC: D | RNVC: 9

23 Mar 2012

Load More Results