What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 119 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 119of 575

3040-01-604-6321
Linear Actuating Cylinder Piston

016046321
FA1570: RNCC: 3 | RNVC: 2

10 Apr 2012

3040-01-606-3107
Remote Control Lever

016063107
8M0041430: RNCC: 3 | RNVC: 2
8M0041430-RC: RNCC: 5 | RNVC: 2

16 May 2012

3040-01-607-0074
Mechanically Actuated Spindle

016070074
805-1630163 PC5: RNCC: 3 | RNVC: 2

29 May 2012

3040-01-562-1370
Shouldered Shaft

015621370
MP5-2475-1M: RNCC: 3 | RNVC: 2

31 Mar 2008

3040-01-562-4400
Nonaircraft Mechanical Actuator

015624400
7385991: RNCC: 3 | RNVC: 2
ISP-081: RNCC: 5 | RNVC: 2

9 Apr 2008

3040-01-562-3500
Spur Gearshaft

015623500
13015642: RNCC: 3 | RNVC: 2

5 Apr 2008

3040-01-562-8439
Rigid Connecting Link

015628439
3386093: RNCC: 3 | RNVC: 2
90554826: RNCC: 5 | RNVC: 2
3386093: RNCC: 5 | RNVC: 9

23 Apr 2008

3040-01-562-9345
Shouldered Shaft

015629345
3305AS1124-1: RNCC: 3 | RNVC: 2

25 Apr 2008

3040-01-569-0763
Shouldered Shaft

015690763
1401-21026-34: RNCC: 3 | RNVC: 2

19 Nov 2008

3040-01-570-0506
Shouldered Shaft

015700506
C102200: RNCC: 3 | RNVC: 2
C104918 FIND 28: RNCC: 5 | RNVC: 2

15 Dec 2008

3040-01-537-4816
Rotating Shaft Eye Bracket

015374816
3471826: RNCC: 3 | RNVC: 2
3471826: RNCC: 3 | RNVC: 9

9 Feb 2006

3040-01-554-1781
Rigid Connecting Link

015541781
47065412: RNCC: 3 | RNVC: 2
47065412: RNCC: 5 | RNVC: 9

1 Aug 2007

3040-01-554-1903
Rigid Connecting Link

015541903
3010171: RNCC: 3 | RNVC: 2

1 Aug 2007

3040-01-559-0417
Rotating Shaft Eye Bracket

015590417
9230A6324: RNCC: 3 | RNVC: 2
B001ARM93: RNCC: 5 | RNVC: 2

4 Dec 2007

3040-01-560-4663
Hollow Shaft

015604663
0423 0382: RNCC: 3 | RNVC: 2

31 Jan 2008

3040-01-560-9176
Shaft Idler

015609176
12527296: RNCC: 3 | RNVC: 2
24C-IAE: RNCC: 5 | RNVC: 9

20 Feb 2008

3040-01-570-4468
Shouldered Shaft

015704468
397-1832: RNCC: 3 | RNVC: 2
177-1052: RNCC: 3 | RNVC: 9

31 Dec 2008

3040-01-579-0266
Linear Actuating Cylinder Assembly Parts Kit

015790266
1027302: RNCC: 3 | RNVC: 2
V005987: RNCC: 3 | RNVC: 9

28 Oct 2009

3040-01-579-9577
Helical Gear And Shaft Assembly

015799577
A88245063: RNCC: 3 | RNVC: 2

30 Nov 2009

3040-01-590-9815
Shouldered Shaft

015909815
33307-40108-1: RNCC: 3 | RNVC: 2

5 Jan 2011

3040-01-590-3529
Rigid Connecting Link

015903529
1807560-103: RNCC: 3 | RNVC: 2

1 Dec 2010

3040-01-590-8392
Rigid Connecting Link

015908392
3-50885-3: RNCC: 3 | RNVC: 2
3-50885-3: RNCC: 5 | RNVC: 2

27 Dec 2010

3040-01-587-7939
Control Cam

015877939
SCH85888: RNCC: 3 | RNVC: 2

20 Aug 2010

3040-01-588-3440
Shouldered Shaft

015883440
41004374: RNCC: 3 | RNVC: 2

14 Sep 2010

3040-01-588-4193
Shouldered Shaft

015884193
41010939: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-528-5090
Mechanical Drive Housing

015285090
141-6674: RNCC: 3 | RNVC: 2

16 Mar 2005

3040-01-529-9450
Straight Shaft

015299450
12711: RNCC: 3 | RNVC: 2

9 May 2005

3040-01-529-6095
Nonrotating Shaft Eye Bracket

015296095
371BRCKT: RNCC: 3 | RNVC: 2

22 Apr 2005

3040-01-528-2806
Linear Actuating Cylinder Assembly Parts Kit

015282806
213.24.450.06: RNCC: 3 | RNVC: 2

9 Mar 2005

3040-01-532-1148
Straight Shaft

015321148
97553-150-1: RNCC: 3 | RNVC: 2
X000993-290: RNCC: 5 | RNVC: 9
000993-290-1: RNCC: 7 | RNVC: 2

28 Jul 2005

3040-01-532-0955
Mate Aircraft Shaft

015320955
110356-1: RNCC: 3 | RNVC: 2

28 Jul 2005

3040-01-532-7681
Flexible Shaft Assembly Casing

015327681
DM-21: RNCC: 3 | RNVC: 2

19 Aug 2005

3040-01-532-6033
Linear Actuating Cylinder Assembly

015326033
2332625: RNCC: 3 | RNVC: 2

12 Aug 2005

3040-01-533-5688
Breather

015335688
0018-2015-000: RNCC: 3 | RNVC: 2
0018-2015-000: RNCC: 5 | RNVC: 9

20 Sep 2005

3040-01-534-8364
Shouldered Shaft

015348364
923173-1: RNCC: 3 | RNVC: 2

3 Nov 2005

3040-01-535-0393
Rigid Connecting Link

015350393
4066636: RNCC: 3 | RNVC: 2
4066636: RNCC: 5 | RNVC: 2
4066636: RNCC: 5 | RNVC: 2

14 Nov 2005

3040-01-535-3509
Control Cam

015353509
751-7068535-122: RNCC: 3 | RNVC: 2
751-7068534-71: RNCC: 5 | RNVC: 2
H841-0310-0310-71: RNCC: 5 | RNVC: 2
H841-0311-122: RNCC: 5 | RNVC: 2

25 Nov 2005

3040-01-537-1181
Gear Collar

015371181
15875-2437-0: RNCC: 3 | RNVC: 2

26 Jan 2006

3040-01-537-3182
Control Cam

015373182
039-049-00: RNCC: 3 | RNVC: 9

2 Feb 2006

3040-01-538-4819
Linear Actuating Cylinder

015384819
A1-B9804: RNCC: 3 | RNVC: 2
B9808 ITEM 4: RNCC: 5 | RNVC: 2

23 Mar 2006

3040-01-539-6305
Shouldered Shaft

015396305
167-7066800-48: RNCC: 3 | RNVC: 2
H547-1803-48: RNCC: 5 | RNVC: 2

27 Apr 2006

3040-01-540-6520
Housing Adapter

015406520
S2C10377-3EA: RNCC: 3 | RNVC: 1

26 May 2006

3040-01-541-2295
Linear Actuating Cylinder Head

015412295
DM9006-16: RNCC: 3 | RNVC: 2
DM-1806-16: RNCC: 5 | RNVC: 9

20 Jun 2006

3040-01-541-4819
Control Pedal

015414819
005674: RNCC: 3 | RNVC: 2
005674: RNCC: 5 | RNVC: 9

28 Jun 2006

3040-01-541-8101
Linear Actuating Cylinder Assembly

015418101
S9425: RNCC: 3 | RNVC: 2
7HE483: RNCC: 5 | RNVC: 2
6602250: RNCC: 5 | RNVC: 2
7HE483: RNCC: 5 | RNVC: 9

12 Jul 2006

3040-01-541-9210
Manual Control Lever

015419210
F60-0020: RNCC: 3 | RNVC: 2

17 Jul 2006

3040-01-543-4434
Rigid Connecting Link

015434434
JE269-46: RNCC: 3 | RNVC: 2
803-6397269 PC 46: RNCC: 5 | RNVC: 9

13 Sep 2006

3040-01-540-0641
Straight Shaft

015400641
167-6404600 FIND 139: RNCC: 3 | RNVC: 2

9 May 2006

3040-01-545-0463
Linear Actuating Cylinder Assembly

015450463
333/E3607: RNCC: 3 | RNVC: 2
347/21010: RNCC: 5 | RNVC: 9

31 Oct 2006

3040-01-545-2737
Hub Clamp

015452737
FS926: RNCC: 3 | RNVC: 2
1001373: RNCC: 5 | RNVC: 2

7 Nov 2006

3040-01-545-9500
Manual Control Lever Assembly

015459500
70301-85028-041: RNCC: 3 | RNVC: 2

30 Nov 2006

3040-01-546-0258
Manual Control Lever

015460258
1636412: RNCC: 3 | RNVC: 2
163-6412: RNCC: 5 | RNVC: 2

4 Dec 2006

3040-01-547-6675
Shaft Retaining Plate

015476675
29515106: RNCC: 3 | RNVC: 2

29 Jan 2007

3040-01-548-1985
Shaft Collar

015481985
0441-2035: RNCC: 3 | RNVC: 2
001-ALUM COLLAR: RNCC: 5 | RNVC: 9
990-2506000 FIND 37: RNCC: 5 | RNVC: 9

13 Feb 2007

3040-01-547-8648
Nonaircraft Mechanical Actuator

015478648
201107-01F: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-548-5060
Linear Actuating Cylinder Piston

015485060
1340798C1: RNCC: 3 | RNVC: 2

23 Feb 2007

3040-01-548-6133
Flexible Shafting

015486133
57353-20: RNCC: 3 | RNVC: 2
57353: RNCC: 5 | RNVC: 9

28 Feb 2007

3040-01-548-7235
Linear Actuating Cylinder Cap

015487235
297284A1: RNCC: 3 | RNVC: 2

2 Mar 2007

3040-01-549-1556
Linear Actuating Cylinder Piston

015491556
123732A1: RNCC: 3 | RNVC: 2

13 Mar 2007

3040-01-549-1985
Worm Wheel Gearshaft

015491985
CL40MRSBML-B: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-1872
Worm Wheel Gearshaft

015491872
CL40FRSBML-D: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-549-4112
Rigid Connecting Link

015494112
347/00196: RNCC: 3 | RNVC: 2

20 Mar 2007

3040-01-551-8041
Channel Plate

015518041
364241 4103: RNCC: 3 | RNVC: 2
88106-345 PC18 REV A.2: RNCC: D | RNVC: 9

29 May 2007

3040-01-551-9075
Shouldered Shaft

015519075
D-WK-871-25 PC12: RNCC: 3 | RNVC: 2
H-WK-871-2 PC12: RNCC: 5 | RNVC: 2

31 May 2007

3040-01-552-1728
Control Cable Assembly

015521728
D-WK-871-86 ASSY B: RNCC: 3 | RNVC: 2
F-WK-871-10 PC49: RNCC: 5 | RNVC: 2

7 Jun 2007

3040-01-552-4170
Disc Brake Caliper Parts Kit

015524170
2841K: RNCC: 3 | RNVC: 2
625SB-CC REPAIR KIT: RNCC: 5 | RNVC: 2

13 Jun 2007

3040-01-552-5115
Linear Actuating Cylinder Assembly

015525115
347/21009: RNCC: 3 | RNVC: 2
CV164533H: RNCC: 5 | RNVC: 2

15 Jun 2007

3040-01-553-0844
Bevel Gearshaft

015530844
PK39: RNCC: 3 | RNVC: 2
PK3301-1PC51: RNCC: 5 | RNVC: 2

5 Jul 2007

3040-01-553-5307
Linear Actuating Cylinder Assembly

015535307
347/20998: RNCC: 3 | RNVC: 2

18 Jul 2007

3040-01-553-7037
Shouldered Shaft

015537037
13860605-01: RNCC: 3 | RNVC: 2
860600-ITEM4: RNCC: 5 | RNVC: 2

24 Jul 2007

3040-01-553-9819
Housing Adapter

015539819
62179240: RNCC: 3 | RNVC: 2
62179240: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-553-6263
Adaption Kit

015536263
41736212: RNCC: 3 | RNVC: 2
41736212: RNCC: 5 | RNVC: 9

20 Jul 2007

3040-01-554-0329
Rigid Connecting Link

015540329
47071812: RNCC: 3 | RNVC: 2
47071812: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-553-6888
Rigid Connecting Link

015536888
6702903: RNCC: 3 | RNVC: 2
6702903: RNCC: 5 | RNVC: 2

23 Jul 2007

3040-01-558-6159
Extension Shaft

015586159
K12F: RNCC: 3 | RNVC: 9

15 Nov 2007

3040-01-559-6310
Welded Pivot Arm

015596310
13969: RNCC: 3 | RNVC: 2

27 Dec 2007

3040-01-555-6701
Shouldered Shaft

015556701
8196536: RNCC: 3 | RNVC: 2
8196536: RNCC: 5 | RNVC: 2

11 Sep 2007

3040-01-556-5352
Mechanical Drive Housing

015565352
A3235A2185: RNCC: 3 | RNVC: 2
2508074C91: RNCC: 5 | RNVC: 2

3 Oct 2007

3040-01-556-6974
Rigid Connecting Link

015566974
74A672423-2005: RNCC: 3 | RNVC: 2

4 Oct 2007

3040-01-557-5407
Rigid Connecting Link

015575407
R0075729: RNCC: 3 | RNVC: 2
R0075729: RNCC: 5 | RNVC: 2
P-ZLAB-0052218: RNCC: 5 | RNVC: 2
R0075729-0102: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-557-6447
Rigid Connecting Link

015576447
R0072314: RNCC: 3 | RNVC: 2
R0072314: RNCC: 5 | RNVC: 2
R0072314-0301: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-563-6813
Hydraulic Fluid Diffuser

015636813
2252: RNCC: 3 | RNVC: 2
3560981: RNCC: 5 | RNVC: 2
3560981: RNCC: 7 | RNVC: 9

19 May 2008

3040-01-564-4792
Shouldered Shaft Assembly

015644792
197-4971: RNCC: 3 | RNVC: 2
14KP200: RNCC: 5 | RNVC: 2
14KP200: RNCC: 5 | RNVC: 9

18 Jun 2008

3040-01-564-6370
Nonaircraft Mechanical Actuator

015646370
12508533: RNCC: 3 | RNVC: 2
22KP146: RNCC: 5 | RNVC: 2
12508533: RNCC: 5 | RNVC: 2
22KP146: RNCC: 5 | RNVC: 9
12508533: RNCC: 5 | RNVC: 9

23 Jun 2008

3040-01-564-7779
Rigid Connecting Link

015647779
3708305C1: RNCC: 3 | RNVC: 2
3685170C1: RNCC: 5 | RNVC: 9
3685170C1L: RNCC: 5 | RNVC: 9

27 Jun 2008

3040-01-565-8548
Rigid Connecting Link

015658548
805-1624130 PC 9 CRES316: RNCC: 3 | RNVC: 2

11 Aug 2008

3040-01-566-0596
Shaft Idler

015660596
14KP970: RNCC: 3 | RNVC: 2
GS-5086: RNCC: 5 | RNVC: 2
GS-5086: RNCC: 5 | RNVC: 2
14KP970: RNCC: 5 | RNVC: 9

19 Aug 2008

3040-01-566-0597
Rigid Connecting Link

015660597
14KP972: RNCC: 3 | RNVC: 2
ML2-12.38: RNCC: 5 | RNVC: 1
ML2-12.38: RNCC: 5 | RNVC: 2
14KP972: RNCC: 5 | RNVC: 9

19 Aug 2008

3040-01-566-1413
Rigid Connecting Link

015661413
LCS2-13532-32S: RNCC: 3 | RNVC: 2
13532-32S: RNCC: 5 | RNVC: 9

21 Aug 2008

3040-01-566-3670
Remote Control Lever

015663670
AT210334: RNCC: 3 | RNVC: 2

28 Aug 2008

3040-01-566-6192
Rigid Connecting Link

015666192
AT307513: RNCC: 3 | RNVC: 2

4 Sep 2008

3040-01-566-7874
Worm Shaft

015667874
LA-019: RNCC: 3 | RNVC: 9
LA-019: RNCC: 5 | RNVC: 2

10 Sep 2008

3040-01-567-3544
Push-Pull Control Assembly

015673544
216-MC0X30: RNCC: 3 | RNVC: 9
UFLMC0X30: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-567-6734
Straight Axle

015676734
T433938: RNCC: 3 | RNVC: 2
T433938: RNCC: 3 | RNVC: 9

2 Oct 2008

3040-01-568-6031
Pneumatic Actuator Cylinder Housing

015686031
3113566C91L: RNCC: 3 | RNVC: 2
0147040058-00: RNCC: 5 | RNVC: 2
0147040058-00: RNCC: 5 | RNVC: 9
0147040058-00: RNCC: C | RNVC: 1

4 Nov 2008

3040-01-569-9471
Rigid Connecting Link

015699471
51-1641-0001: RNCC: 3 | RNVC: 2

11 Dec 2008

3040-01-570-4427
Flexible Drive Shaft

015704427
5010213: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-571-2433
Aircaster

015712433
22642: RNCC: 3 | RNVC: 2
48UHDSMX: RNCC: 5 | RNVC: 2

29 Jan 2009

3040-01-572-3126
Shouldered Shaft

015723126
FD0525: RNCC: 3 | RNVC: 2

6 Mar 2009

3040-01-572-3534
Remote Control Lever

015723534
1001097048: RNCC: 3 | RNVC: 2
89730: RNCC: 5 | RNVC: 2
89730-08: RNCC: 5 | RNVC: 2
89730: RNCC: 5 | RNVC: 9

9 Mar 2009

3040-01-573-1068
Counterbalance Weight

015731068
23071999-2: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-1076
Counterbalance Weight

015731076
23071999-4: RNCC: 3 | RNVC: 2

7 Apr 2009

3040-01-573-8262
Engine Head Control

015738262
06240-ZW5-U60: RNCC: 3 | RNVC: 9

6 May 2009

3040-01-574-5471
Linear Actuating Cylinder Assembly

015745471
2084015: RNCC: 3 | RNVC: 2
2084015: RNCC: 5 | RNVC: 2

1 Jun 2009

3040-01-575-4008
Linear Actuating Cylinder Head

015754008
595/10027: RNCC: 3 | RNVC: 2

30 Jun 2009

3040-01-575-5740
Nonaircraft Mechanical Actuator

015755740
MIL-16925-L-23: RNCC: 3 | RNVC: 2
16906-58L: RNCC: 5 | RNVC: 9
12505996-001: RNCC: 7 | RNVC: 2

8 Jul 2009

3040-01-575-5242
Crankshaft Pulley Adapter

015755242
219-7477: RNCC: 3 | RNVC: 2
16KP233: RNCC: 5 | RNVC: 2
219-7477: RNCC: 5 | RNVC: 9
16KP233: RNCC: 5 | RNVC: 9

6 Jul 2009

3040-01-575-4803
Piston Ring

015754803
R909832127: RNCC: 3 | RNVC: 2
12KP683: RNCC: 5 | RNVC: 2
12KP683: RNCC: 5 | RNVC: 9

2 Jul 2009

3040-01-575-7078
Rigid Connecting Link

015757078
A22-61557-000: RNCC: 3 | RNVC: 2
A22-61557: RNCC: D | RNVC: 9

13 Jul 2009

3040-01-575-7070
Rigid Connecting Link

015757070
WWS 50286-3406: RNCC: 3 | RNVC: 2

13 Jul 2009

3040-01-575-7030
Rotating Shaft Eye Bracket

015757030
200925087-01: RNCC: 3 | RNVC: 2
200925087-01: RNCC: 5 | RNVC: 2
200925087-01: RNCC: 5 | RNVC: 2
200925087-01: RNCC: 5 | RNVC: 2
200925087-01: RNCC: 5 | RNVC: 2
200925087-01: RNCC: 5 | RNVC: 2
200925087-01: RNCC: 5 | RNVC: 2
200925087-01: RNCC: 5 | RNVC: 2
200925087-01: RNCC: 5 | RNVC: 2
200925087-01: RNCC: 5 | RNVC: 9

13 Jul 2009

3040-01-576-1901
Rigid Connecting Link

015761901
354997: RNCC: 3 | RNVC: 2
ZB0354997: RNCC: 5 | RNVC: 2
353648: RNCC: 5 | RNVC: 9

23 Jul 2009

3040-01-575-9740
Belt-Chain Tension Adjusting Device

015759740
89481: RNCC: 3 | RNVC: 2
89481: RNCC: 5 | RNVC: 2
R0099880: RNCC: 5 | RNVC: 2
89406: RNCC: 5 | RNVC: 9
R0099880: RNCC: 7 | RNVC: 2
R0099880-0301: RNCC: D | RNVC: 9

20 Jul 2009

3040-01-580-5053
Shouldered Shaft

015805053
2442711: RNCC: 3 | RNVC: 2

16 Dec 2009

3040-01-583-2634
Linear Actuating Cylinder Piston

015832634
MVG75-1097: RNCC: 3 | RNVC: 2
22KP416: RNCC: 5 | RNVC: 1

22 Mar 2010

3040-01-583-5098
Control Cam

015835098
707213-6: RNCC: 3 | RNVC: 2
707213-6: RNCC: 3 | RNVC: 9

26 Mar 2010

3040-01-583-8757
Shouldered Shaft

015838757
PD44500PCBB: RNCC: 3 | RNVC: 2

9 Apr 2010

3040-01-584-1382
Aircraft Hub Clamp

015841382
901-011-424-109: RNCC: 3 | RNVC: 2

19 Apr 2010

3040-01-583-9742
Controllable Swashplate

015839742
2498556: RNCC: 3 | RNVC: 2

14 Apr 2010

3040-01-584-2695
Shouldered Shaft

015842695
214-040-622-107: RNCC: 3 | RNVC: 2
449-540-003-105: RNCC: C | RNVC: 1

21 Apr 2010

3040-01-585-6246
Planetary Gears Carrier

015856246
449-040-077-101: RNCC: 3 | RNVC: 2

1 Jun 2010

3040-01-587-3392
Rigid Connecting Link

015873392
3257240-501: RNCC: 3 | RNVC: 2
3257240: RNCC: D | RNVC: 9

3 Aug 2010

3040-01-588-3201
Shouldered Shaft

015883201
41010959-195: RNCC: 3 | RNVC: 2

13 Sep 2010

3040-01-592-8249
Manual Control Lever Assembly

015928249
5251089: RNCC: 3 | RNVC: 2

22 Mar 2011

3040-01-592-9368
Nonaircraft Mechanical Actuator

015929368
VT2317H13A020: RNCC: 3 | RNVC: 2
28023-512-0206 PC 9, 10: RNCC: 5 | RNVC: 2

29 Mar 2011

3040-01-593-4775
Shaft Retaining Plate

015934775
2248330W: RNCC: 3 | RNVC: 2
2248330W: RNCC: 5 | RNVC: 9

8 Apr 2011

3040-01-593-8429
Manual Control Lever

015938429
DV1745-016-1: RNCC: 3 | RNVC: 2
3922AS124-1: RNCC: 5 | RNVC: 2
DV1745-060-1: RNCC: 5 | RNVC: 9
DV1745-061-1: RNCC: 5 | RNVC: 9
3922AS161-1: RNCC: 5 | RNVC: 9

19 Apr 2011

3040-01-593-8783
Linear Actuating Cylinder Assembly

015938783
8040739: RNCC: 3 | RNVC: 2

20 Apr 2011

3040-01-593-2885
Bell Crank Support

015932885
1590M22P03: RNCC: 3 | RNVC: 2

6 Apr 2011

3040-01-595-4699
Flexible Shafting

015954699
5035L106-1: RNCC: 3 | RNVC: 2

28 Apr 2011

3040-01-595-5779
Bell Crank

015955779
563-8356628-PS-1: RNCC: 3 | RNVC: 2
563-8217027-09: RNCC: 5 | RNVC: 2
H5520505PSA-1: RNCC: 5 | RNVC: 2

2 May 2011

3040-01-595-7228
Brake Shoe Set

015957228
1000545-01M1: RNCC: 3 | RNVC: 9
1000545-01M1: RNCC: 5 | RNVC: 2
1000545-01M1: RNCC: C | RNVC: 1
1000545: RNCC: D | RNVC: 9

5 May 2011

3040-01-595-6472
Rigid Connecting Link

015956472
0423 3849: RNCC: 3 | RNVC: 2

4 May 2011

3040-01-595-9715
Straight Shaft

015959715
56461P: RNCC: 3 | RNVC: 2

9 May 2011

3040-01-597-6584
Rigid Connecting Link

015976584
1842900C92: RNCC: 3 | RNVC: 2

20 Jun 2011

3040-01-598-7023
Straight Shaft

015987023
8350T32: RNCC: 3 | RNVC: 2

22 Aug 2011

3040-01-598-9064
Remote Control Lever

015989064
13D150150-01: RNCC: 3 | RNVC: 2
13D150139-03: RNCC: 5 | RNVC: 9
13D150131-01: RNCC: E | RNVC: 8
860500-ITEM1: RNCC: E | RNVC: 8
13D150139-02: RNCC: E | RNVC: 8

31 Aug 2011

3040-01-600-1920
Ball Joint

016001920
2998K391: RNCC: 3 | RNVC: 2

15 Nov 2011

3040-01-600-3997
Straight Shaft

016003997
449-001-175-101: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-7223
Remote Control Lever

016007223
10004A0107: RNCC: 3 | RNVC: 2

15 Dec 2011

3040-01-602-0969
Straight Shaft

016020969
P-9925: RNCC: 3 | RNVC: 2

26 Jan 2012

3040-01-602-2449
Rigid Connecting Link

016022449
OXP6X170: RNCC: 3 | RNVC: 2

28 Jan 2012

3040-01-602-2119
Rigid Connecting Link

016022119
70303-03023-059: RNCC: 3 | RNVC: 2

27 Jan 2012

3040-01-602-4137
Rigid Connecting Link

016024137
70305-02119-044: RNCC: 3 | RNVC: 2

30 Jan 2012

3040-01-603-8105
Ball Joint

016038105
38078 U: RNCC: 3 | RNVC: 9

16 Mar 2012

3040-01-604-4446
Spur Gearshaft

016044446
TCS1000-B0005: RNCC: 3 | RNVC: 2

5 Apr 2012

3040-01-605-7161
Shouldered Shaft

016057161
14630: RNCC: 3 | RNVC: 2
26KP432: RNCC: 5 | RNVC: 2
26KP432: RNCC: 5 | RNVC: 9

23 Apr 2012

3040-01-605-7953
Shouldered Shaft

016057953
R8504691-SP102: RNCC: 3 | RNVC: 2
R8504691-SP102: RNCC: 5 | RNVC: 2

25 Apr 2012

3040-01-606-0662
End Fitting

016060662
GCV420246-001: RNCC: 3 | RNVC: 9
GCV420246-001: RNCC: 5 | RNVC: 2

4 May 2012

3040-01-607-1091
Cylinder Support

016071091
R8505661-SP102: RNCC: 3 | RNVC: 2
R8505661-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-607-1094
Cylinder Support

016071094
R8505683-SP102: RNCC: 3 | RNVC: 2
R8505683-SP102: RNCC: 5 | RNVC: 2

31 May 2012

3040-01-608-0285
Piston Ring Set

016080285
2ARW12002: RNCC: 3 | RNVC: 2
2ARW12002: RNCC: 3 | RNVC: 9

20 Jun 2012

3040-01-608-2841
Straight Shaft

016082841
3197904: RNCC: 3 | RNVC: 2
3197904: RNCC: 3 | RNVC: 9

21 Jun 2012

3040-01-546-9020
Nonrotating Shaft Eye Bracket

015469020
1693-018: RNCC: 3 | RNVC: 2
5HB169: RNCC: 5 | RNVC: 2
5HB169: RNCC: 5 | RNVC: 9

8 Jan 2007

3040-01-558-3106
Nonrotating Shaft Eye Bracket

015583106
3671850: RNCC: 3 | RNVC: 2
3671850: RNCC: 5 | RNVC: 9

5 Nov 2007

3040-01-558-3248
Straight Shaft

015583248
2213960: RNCC: 3 | RNVC: 2
2213960: RNCC: 5 | RNVC: 9

5 Nov 2007

3040-01-569-6625
Rigid Connecting Link

015696625
7-29-056: RNCC: 3 | RNVC: 2

5 Dec 2008

3040-01-608-0349
Shouldered Shaft

016080349
50946: RNCC: 3 | RNVC: 2

20 Jun 2012

3040-01-527-8499
Control Cam

015278499
11581561: RNCC: 3 | RNVC: 2

18 Feb 2005

3040-01-528-2044
Manual Control Lever

015282044
1732072: RNCC: 3 | RNVC: 2

7 Mar 2005

3040-01-529-1489
Brake Disc

015291489
H070103-008: RNCC: 3 | RNVC: 2
H070103-004: RNCC: 5 | RNVC: 9
H070103-007: RNCC: 5 | RNVC: 9

6 Apr 2005

3040-01-530-0925
Rigid Connecting Link

015300925
393HN3048-1: RNCC: 3 | RNVC: 2

13 May 2005

3040-01-531-2171
Rigid Connecting Link

015312171
123AM42009-9: RNCC: 3 | RNVC: 9
123AM42009: RNCC: 5 | RNVC: 2
123AM42009-9: RNCC: 5 | RNVC: 9
123AM42009-9: RNCC: C | RNVC: 1
123AM42009: RNCC: D | RNVC: 9

29 Jun 2005

3040-01-531-9555
Mechanical Drive Housing

015319555
06X04 0309: RNCC: 3 | RNVC: 2
5327801: RNCC: 5 | RNVC: 2
3527801: RNCC: 5 | RNVC: 2
3527801: RNCC: 5 | RNVC: 9

22 Jul 2005

3040-01-532-3011
Shouldered Shaft Assembly

015323011
901-331-951-115: RNCC: 3 | RNVC: 2
901-331-951-115: RNCC: 5 | RNVC: 1
TY2043-02A: RNCC: 5 | RNVC: 2
TY2043-02A: RNCC: 5 | RNVC: 2

4 Aug 2005

3040-01-533-3687
Straight Shaft

015333687
14209-151-000: RNCC: 3 | RNVC: 2
14100PL FIND NO.8: RNCC: 5 | RNVC: 2

13 Sep 2005

3040-01-534-4925
Worm Shaft

015344925
44705/1-145-000: RNCC: 3 | RNVC: 2
PL40200 FIND NO 20 RIGHT HAND: RNCC: 5 | RNVC: 2

25 Oct 2005

3040-01-534-4117
Rigid Connecting Link

015344117
113434-1: RNCC: 3 | RNVC: 2
113434: RNCC: D | RNVC: 9

20 Oct 2005

3040-01-534-5034
Shouldered Shaft

015345034
9C00568-1: RNCC: 3 | RNVC: 2

25 Oct 2005

3040-01-534-4065
Housing Adapter

015344065
11450193-1: RNCC: 3 | RNVC: 2

20 Oct 2005

3040-01-535-9715
Rigid Connecting Link

015359715
12540093: RNCC: 3 | RNVC: 2
12540093: RNCC: 5 | RNVC: 2
6431638-200M1: RNCC: 5 | RNVC: 2
6431638-200M1: RNCC: 5 | RNVC: 9
6431638-200M1: RNCC: 5 | RNVC: 9

15 Dec 2005

3040-01-535-4002
Cylinder Support

015354002
31131: RNCC: 3 | RNVC: 2
LS-30139ITEM6: RNCC: 5 | RNVC: 2

29 Nov 2005

3040-01-538-8532
Mechanically Actuated Spindle

015388532
F-WK-871-4 PC 71: RNCC: 3 | RNVC: 2

3 Apr 2006

3040-01-538-7612
Rigid Connecting Link

015387612
74A671213-2005: RNCC: 3 | RNVC: 2

30 Mar 2006

3040-01-536-0907
Shaft Collar

015360907
1C010-2354-2: RNCC: 3 | RNVC: 2
1C010-2354-0: RNCC: 5 | RNVC: 9

20 Dec 2005

3040-01-540-3461
Shouldered Shaft

015403461
12441882-001: RNCC: 3 | RNVC: 2

16 May 2006

3040-01-540-8479
Hydraulic Accumulator Cylinder

015408479
CYR2010AR: RNCC: 3 | RNVC: 9
6602230: RNCC: 5 | RNVC: 2
5HB65: RNCC: 5 | RNVC: 2
5HB65: RNCC: 5 | RNVC: 9

6 Jun 2006

3040-01-542-3464
Transmission Fluid Cooler

015423464
3786.046.0000: RNCC: 3 | RNVC: 2
10009860: RNCC: 5 | RNVC: 2
MAS11756: RNCC: 5 | RNVC: 2

1 Aug 2006

3040-01-542-4002
Manual Control Lever

015424002
SPK-D504C: RNCC: 3 | RNVC: 2
DPH-C5U-A03 ITEM 8: RNCC: 5 | RNVC: 2
SPK-D504C--B: RNCC: 5 | RNVC: 9
DPH-C5U-A03: RNCC: D | RNVC: 9

3 Aug 2006

3040-01-543-4104
Shouldered Shaft

015434104
20706479: RNCC: 3 | RNVC: 2
462GC315M: RNCC: 5 | RNVC: 9
10025878: RNCC: 5 | RNVC: 9

12 Sep 2006

3040-01-543-6062
Shouldered Shaft

015436062
114607-1: RNCC: 3 | RNVC: 2

18 Sep 2006

3040-01-544-1515
Flexible Drive Shaft

015441515
731534: RNCC: 3 | RNVC: 2

3 Oct 2006

3040-01-544-5191
Rigid Connecting Link

015445191
2266576: RNCC: 3 | RNVC: 2

16 Oct 2006

3040-01-545-0799
Rigid Connecting Link

015450799
9517-261-00P: RNCC: 3 | RNVC: 2

1 Nov 2006

3040-01-545-6083
Rigid Connecting Link

015456083
70104-08021-046: RNCC: 3 | RNVC: 2
3040PL1951707: RNCC: 6 | RNVC: 9

17 Nov 2006

3040-01-545-7625
Rigid Connecting Link

015457625
FP008: RNCC: 3 | RNVC: 2
1001389: RNCC: 5 | RNVC: 1

27 Nov 2006

3040-01-546-0900
Fuel Shaft

015460900
3095356: RNCC: 3 | RNVC: 2

6 Dec 2006

3040-01-546-1238
Rotor Trans Fld Fil

015461238
061480-100: RNCC: 3 | RNVC: 2

7 Dec 2006

3040-01-546-4126
Ai Rotor Trans Fill

015464126
061479-100: RNCC: 3 | RNVC: 2

14 Dec 2006

3040-01-546-9379
Mixer Auger

015469379
1604-254-00: RNCC: 3 | RNVC: 2
5HB163: RNCC: 5 | RNVC: 2
5HB163: RNCC: 5 | RNVC: 9

9 Jan 2007

3040-01-546-7141
Mechanical Drive Housing

015467141
901-045-205-101: RNCC: 3 | RNVC: 2

28 Dec 2006

3040-01-547-6516
Manual Control Lever

015476516
7053926: RNCC: 3 | RNVC: 2

26 Jan 2007

3040-01-547-7452
Angle In Bottom Bar

015477452
16242006-15: RNCC: 3 | RNVC: 2
16241014 FIND NO. 10: RNCC: 5 | RNVC: 2
16242006-15: RNCC: 5 | RNVC: 9

31 Jan 2007

3040-01-547-8125
Aircra Output Shaft

015478125
42555-319: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-547-8267
M Aircraft Rod Seal

015478267
42555-336: RNCC: 3 | RNVC: 2
591-01100-160-0190: RNCC: 5 | RNVC: 1
S30775-011P5: RNCC: 5 | RNVC: 2

1 Feb 2007

3040-01-548-5597
Linear Actuating Cylinder Assembly

015485597
199720A1: RNCC: 3 | RNVC: 2

27 Feb 2007

3040-01-548-6402
Linear Actuating Cylinder Piston Rod

015486402
110307A1: RNCC: 3 | RNVC: 2

28 Feb 2007

3040-01-549-1368
Nonaircraft Mechanical Actuator

015491368
KRA24ALS1: RNCC: 3 | RNVC: 2
KRA24ALS1: RNCC: C | RNVC: 1

13 Mar 2007

3040-01-549-4080
Shouldered Axle

015494080
F058371: RNCC: 3 | RNVC: 2
F057793 ITEM 6: RNCC: 5 | RNVC: 2

20 Mar 2007

3040-01-549-6271
Push-Pull Control Assembly

015496271
F061068: RNCC: 3 | RNVC: 2
F061068: RNCC: 3 | RNVC: 9
F061068: RNCC: 5 | RNVC: 2

27 Mar 2007

3040-01-550-6341
Shaft Collar

015506341
3200504000: RNCC: 3 | RNVC: 2

25 Apr 2007

3040-01-551-0980
Mechanical Drive Housing

015510980
122434: RNCC: 3 | RNVC: 2

7 May 2007

3040-01-551-1739
Straight Shaft

015511739
0627-002: RNCC: 3 | RNVC: 2
5HB142: RNCC: 5 | RNVC: 2
5HB142: RNCC: 5 | RNVC: 9

9 May 2007

3040-01-551-2477
Control Cam

015512477
1469-000: RNCC: 3 | RNVC: 2
5HB156: RNCC: 5 | RNVC: 2
5HB156: RNCC: 5 | RNVC: 9

10 May 2007

3040-01-552-5066
Remote Control Lever

015525066
2741572: RNCC: 3 | RNVC: 2
2741572: RNCC: 5 | RNVC: 9

14 Jun 2007

3040-01-552-5123
Linear Actuating Cylinder Head

015525123
594/14266: RNCC: 3 | RNVC: 2
594/14266: RNCC: 5 | RNVC: 2

15 Jun 2007

3040-01-552-0089
Counterbalance Weight

015520089
38150-09424-104: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-553-8240
Sp Shouldered Shaft

015538240
189065-1: RNCC: 3 | RNVC: 2

26 Jul 2007

3040-01-553-9285
Rigid Connecting Link

015539285
38720140: RNCC: 3 | RNVC: 2
38720140: RNCC: 3 | RNVC: 9
38720140: RNCC: 5 | RNVC: 2

27 Jul 2007

3040-01-554-2235
Linear Actuating Cylinder Cap

015542235
12423735: RNCC: 1 | RNVC: 2
QS-3254: RNCC: 3 | RNVC: 2

2 Aug 2007

3040-01-554-2242
Rear Hard Lift Rod

015542242
3286603: RNCC: 3 | RNVC: 2
3286603: RNCC: 3 | RNVC: 9

2 Aug 2007

3040-01-551-5981
Hydraulic Control Assembly

015515981
356-5010: RNCC: 3 | RNVC: 2
233-5996: RNCC: 5 | RNVC: 9

22 May 2007

3040-01-555-4500
Rigid Connecting Link

015554500
USCTR-002-127: RNCC: 3 | RNVC: 2
901-301-022-127: RNCC: 3 | RNVC: 2

6 Sep 2007

3040-01-555-5102
Transmission Range Clutch Hub

015555102
29539505: RNCC: 3 | RNVC: 2

6 Sep 2007

3040-01-556-0712
Linear Actuating Cylinder Assembly

015560712
FP1575: RNCC: 3 | RNVC: 2

24 Sep 2007

3040-01-558-4802
Shouldered Shaft

015584802
70400-02108-052: RNCC: 3 | RNVC: 2

10 Nov 2007

3040-01-560-2213
Control Cable Assembly

015602213
12423640: RNCC: 3 | RNVC: 2
851-06Z10-6S50-05: RNCC: 5 | RNVC: 9
CW0125: RNCC: 5 | RNVC: 9

22 Jan 2008

3040-01-560-7360
Shouldered Shaft

015607360
2306144-1: RNCC: 3 | RNVC: 2

11 Feb 2008

3040-01-562-0508
Rigid Connecting Link

015620508
706E017-4: RNCC: 3 | RNVC: 2

27 Mar 2008

3040-01-561-7038
Trim Pin Kit

015617038
17-893408A01: RNCC: 3 | RNVC: 2
17-893408A01: RNCC: 5 | RNVC: 2

14 Mar 2008

3040-01-562-2130
Straight Shaft

015622130
AM0-0084: RNCC: 3 | RNVC: 2

2 Apr 2008

3040-01-562-1962
Shaft Collar

015621962
600104: RNCC: 3 | RNVC: 2
15KP116: RNCC: 5 | RNVC: 2
15KP116: RNCC: 5 | RNVC: 9

2 Apr 2008

3040-01-563-6771
Rigid Connecting Link

015636771
136100: RNCC: 3 | RNVC: 2

19 May 2008

3040-01-563-7772
Shouldered Shaft

015637772
196-100-022: RNCC: 3 | RNVC: 2

21 May 2008

3040-01-564-0367
Mechanical Drive Housing

015640367
03486: RNCC: 3 | RNVC: 2

3 Jun 2008

3040-01-564-4581
Shouldered Shaft

015644581
5005342: RNCC: 3 | RNVC: 2
ZB5005342: RNCC: 5 | RNVC: 2

17 Jun 2008

3040-01-564-6239
Manual Control Lever

015646239
22KP130: RNCC: 3 | RNVC: 2
12508456: RNCC: 5 | RNVC: 2
22KP130: RNCC: 5 | RNVC: 9

23 Jun 2008

3040-01-564-6581
Spur Gearshaft

015646581
IA0113 ITE 5: RNCC: 3 | RNVC: 2

24 Jun 2008

3040-01-564-9766
Housing Adapter

015649766
20-40-0002: RNCC: 3 | RNVC: 9
20-40-0002: RNCC: 5 | RNVC: 2

7 Jul 2008

3040-01-565-0384
Straight Shaft

015650384
135416-1: RNCC: 3 | RNVC: 9
135416-1: RNCC: 5 | RNVC: 2
135416-1: RNCC: 5 | RNVC: 9

9 Jul 2008

3040-01-565-1255
Shouldered Shaft

015651255
3665534: RNCC: 3 | RNVC: 2
3665534: RNCC: 5 | RNVC: 9

14 Jul 2008

3040-01-565-1518
Nonaircraft Mechanical Actuator

015651518
020750153: RNCC: 3 | RNVC: 2
14KP931: RNCC: 5 | RNVC: 2
14KP931: RNCC: 5 | RNVC: 9

15 Jul 2008

3040-01-565-1398
Differential Spider

015651398
110E3520-ITEM38: RNCC: 3 | RNVC: 2

14 Jul 2008

3040-01-565-7561
Rigid Connecting Link

015657561
B-090106X40CR: RNCC: 3 | RNVC: 2

6 Aug 2008

3040-01-566-0142
Mechanically Actuated Spindle

015660142
805-1624130 PC 29 CRES316: RNCC: 3 | RNVC: 2

15 Aug 2008

3040-01-566-9697
Motor Shaft Assy Wi

015669697
0505-RR8-004: RNCC: 3 | RNVC: 2

15 Sep 2008

3040-01-567-0978
Linear Actuating Cylinder Assembly

015670978
AHC17329: RNCC: 3 | RNVC: 2
AH227114: RNCC: 5 | RNVC: 9

17 Sep 2008

3040-01-567-3413
Straight Shaft

015673413
29540990: RNCC: 3 | RNVC: 2
22KP851: RNCC: 5 | RNVC: 1
29540990: RNCC: 7 | RNVC: 2

24 Sep 2008

3040-01-567-5363
Mechanically Actuated Spindle

015675363
13017364: RNCC: 3 | RNVC: 2

30 Sep 2008

3040-01-567-6725
Svk Kit Insp

015676725
T12619340: RNCC: 3 | RNVC: 2
T12619340: RNCC: 3 | RNVC: 9

2 Oct 2008

3040-01-567-6716
Straight Axle

015676716
T433909: RNCC: 3 | RNVC: 2
T433909: RNCC: 3 | RNVC: 9

2 Oct 2008

3040-01-567-3392
Extension Shaft

015673392
87738195: RNCC: 3 | RNVC: 2

24 Sep 2008

3040-01-568-8844
Mechanical Drive Housing

015688844
231-0700: RNCC: 3 | RNVC: 2

13 Nov 2008

3040-01-569-0757
Shouldered Shaft

015690757
1403-21046-34: RNCC: 3 | RNVC: 2

19 Nov 2008

3040-01-570-4430
Spur Gearshaft

015704430
2712810: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-571-0210
Piston Follower Cup

015710210
WE650S008AT05NP: RNCC: 3 | RNVC: 2
30303 FN 16: RNCC: 5 | RNVC: 1

22 Jan 2009

3040-01-571-2582
Straight Shaft

015712582
GS24311-7: RNCC: 3 | RNVC: 2

29 Jan 2009

3040-01-572-9498
Nonaircraft Mechanical Actuator

015729498
3000337-001: RNCC: 3 | RNVC: 2
3000337-001: RNCC: 3 | RNVC: 9

1 Apr 2009

3040-01-572-7704
Mechanical Drive Housing

015727704
13015620: RNCC: 3 | RNVC: 2

24 Mar 2009

3040-01-573-3951
Rigid Connecting Link

015733951
9-55623-3: RNCC: 3 | RNVC: 2
9-55623: RNCC: D | RNVC: 9

21 Apr 2009

3040-01-573-7633
Belt-Chain Tension Adjusting Device

015737633
13450-PNA-004: RNCC: 3 | RNVC: 9

5 May 2009

3040-01-573-4934
Shouldered Shaft

015734934
407780-002: RNCC: 3 | RNVC: 2

24 Apr 2009

3040-01-572-5963
Pusher Assembly

015725963
GS24311-4: RNCC: 3 | RNVC: 2

17 Mar 2009

3040-01-574-5602
Linear Actuating Cylinder Assembly

015745602
2098222: RNCC: 3 | RNVC: 2
2098222: RNCC: 5 | RNVC: 2

1 Jun 2009

3040-01-575-3417
Rigid Connecting Link

015753417
5005187: RNCC: 3 | RNVC: 2

29 Jun 2009

3040-01-575-3424
Manual Control Lever

015753424
5005188: RNCC: 3 | RNVC: 2

29 Jun 2009

3040-01-575-3950
Rigid Connecting Link

015753950
6442563-01M1: RNCC: 3 | RNVC: 2
6442563-01M1: RNCC: 3 | RNVC: 9
6442563-01M1: RNCC: 5 | RNVC: 2

30 Jun 2009

3040-01-575-6474
Shouldered Shaft

015756474
TDA A3297S1605: RNCC: 3 | RNVC: 2
TDA A3297X1194: RNCC: 3 | RNVC: 9

10 Jul 2009

3040-01-576-7842
Shouldered Shaft

015767842
210106: RNCC: 3 | RNVC: 2

13 Aug 2009

3040-01-578-3682
Planetary Gears Carrier

015783682
3040FM0004: RNCC: 3 | RNVC: 2
29530467: RNCC: 3 | RNVC: 9

2 Oct 2009

3040-01-579-3700
Shouldered Shaft

015793700
N5108C: RNCC: 3 | RNVC: 2

9 Nov 2009

3040-01-579-3596
Body Hub

015793596
16KP403: RNCC: 3 | RNVC: 2
16KP403: RNCC: 5 | RNVC: 9
HR623K: RNCC: 5 | RNVC: 9

9 Nov 2009

3040-01-579-8901
Linear Actuating Cylinder Cap

015798901
8W2842: RNCC: 3 | RNVC: 2

27 Nov 2009

3040-01-580-1141
Shaft Retaining Plate

015801141
3749456: RNCC: 3 | RNVC: 2
3749456: RNCC: 5 | RNVC: 9

4 Dec 2009

3040-01-580-3600
Linear Actuating Cylinder Assembly

015803600
3382818: RNCC: 3 | RNVC: 2
342-7843: RNCC: D | RNVC: 9

11 Dec 2009

3040-01-581-0084
Piston Ring

015810084
P05210: RNCC: 3 | RNVC: 2
C105229 FIND 8: RNCC: 5 | RNVC: 2
C105229: RNCC: D | RNVC: 9

4 Jan 2010

3040-01-582-3095
Shouldered Shaft

015823095
56915: RNCC: 3 | RNVC: 2
56915: RNCC: 5 | RNVC: 1

16 Feb 2010

3040-01-582-0322
Control Cam

015820322
DDE R23537072: RNCC: 3 | RNVC: 2

5 Feb 2010

3040-01-582-3843
Hydraulic Control Assembly

015823843
VAL6314-3604-126: RNCC: 3 | RNVC: 2
3703794: RNCC: 5 | RNVC: 2
VAL6314-3604-126: RNCC: 5 | RNVC: 9
3703794: RNCC: 7 | RNVC: 9

18 Feb 2010

3040-01-586-0585
Straight Shaft

015860585
4425305: RNCC: 3 | RNVC: 2

17 Jun 2010

3040-01-586-8549
Linear Actuating Cylinder Piston

015868549
MVG75-1095: RNCC: 3 | RNVC: 2
22KP414: RNCC: 5 | RNVC: 1

16 Jul 2010

3040-01-587-4515
Spur Gearshaft

015874515
776-0396: RNCC: 3 | RNVC: 2

6 Aug 2010

3040-01-588-5868
Shouldered Shaft

015885868
99625002: RNCC: 3 | RNVC: 2

24 Sep 2010

3040-01-588-6745
Brake Shoe Set

015886745
K098135: RNCC: 3 | RNVC: 2
95SK342: RNCC: 5 | RNVC: 9
95SK342: RNCC: 5 | RNVC: 9
4704726: RNCC: 7 | RNVC: 2

29 Sep 2010

3040-01-589-6591
Spline Adapter

015896591
395-85-8: RNCC: 3 | RNVC: 2

1 Nov 2010

3040-01-590-0919
Belt-Chain Tension Adjusting Device

015900919
25-15450-00: RNCC: 3 | RNVC: 2

17 Nov 2010

3040-01-591-0575
Pivot Shaft Assembly

015910575
41011002: RNCC: 3 | RNVC: 2

10 Jan 2011

3040-01-592-9926
Shouldered Shaft

015929926
123-0856: RNCC: 3 | RNVC: 2

31 Mar 2011

3040-01-594-7691
Straight Shaft

015947691
9C00553-1: RNCC: 3 | RNVC: 2

25 Apr 2011

3040-01-595-4312
Control Cam

015954312
153C6876P2: RNCC: 3 | RNVC: 2

27 Apr 2011

3040-01-595-5686
Pawl

015955686
204-83019-14: RNCC: 3 | RNVC: 2

2 May 2011

3040-01-596-0929
Manual Control Lever Assembly

015960929
PSR: RNCC: 3 | RNVC: 2

11 May 2011

3040-01-597-9639
Rigid Connecting Link

015979639
4292306: RNCC: 3 | RNVC: 2
4292306: RNCC: 5 | RNVC: 2

24 Jun 2011

3040-01-600-0539
Shaft Collar

016000539
10010868: RNCC: 3 | RNVC: 2

4 Nov 2011

3040-01-602-3084
Actuating Camshaft

016023084
034-188-10: RNCC: 3 | RNVC: 9
DX034-188-10: RNCC: 5 | RNVC: 2

28 Jan 2012

3040-01-602-3085
Actuating Camshaft

016023085
034-189-10: RNCC: 3 | RNVC: 9
DX034-189-10: RNCC: 5 | RNVC: 2

28 Jan 2012

3040-01-602-3267
Control Cable Assembly

016023267
J1047-004M: RNCC: 3 | RNVC: 2

28 Jan 2012

3040-01-603-7172
Nonaircraft Mechanical Actuator

016037172
2000-40161-33: RNCC: 3 | RNVC: 2

12 Mar 2012

3040-01-602-9919
Belt-Chain Tension Adjusting Device

016029919
38159: RNCC: 3 | RNVC: 2
3895546: RNCC: 5 | RNVC: 2
3895546: RNCC: 7 | RNVC: 9

15 Feb 2012

3040-01-603-9592
Aircraft Guide Nrp

016039592
210781: RNCC: 3 | RNVC: 2

22 Mar 2012

3040-01-604-1771
Helical-Spur Gearshaft

016041771
531806-2: RNCC: 3 | RNVC: 2
531806-2: RNCC: 5 | RNVC: 9
531806-2: RNCC: 5 | RNVC: 9

28 Mar 2012

3040-01-605-0308
Push-Pull Control Assembly

016050308
CCX63306: RNCC: 3 | RNVC: 2
CCX63306: RNCC: 5 | RNVC: 2
CCX63306: RNCC: 5 | RNVC: 2

16 Apr 2012

3040-01-605-0390
Pneumatic Control Assembly

016050390
MTU-H002-CT-APE-00: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-01-605-6513
Mechanical Drive Housing

016056513
880686T24: RNCC: 3 | RNVC: 2

23 Apr 2012

3040-01-608-3416
Shaft Collar

016083416
200945076-3: RNCC: 3 | RNVC: 2

25 Jun 2012

3040-01-527-3401
Rigid Connecting Link

015273401
69-9605-16: RNCC: 3 | RNVC: 2
69-9605: RNCC: D | RNVC: 9

28 Jan 2005

3040-01-527-7472
Rigid Connecting Link

015277472
11581493: RNCC: 3 | RNVC: 2

16 Feb 2005

3040-01-528-2982
Manual Control Lever

015282982
5-17-7707-00: RNCC: 3 | RNVC: 2
NI-087-602-A ITEM 17: RNCC: 5 | RNVC: 2
SA-770 ITEM 17: RNCC: 5 | RNVC: 2

9 Mar 2005

3040-01-528-5393
Rigid Connecting Link

015285393
901-001-930-105: RNCC: 3 | RNVC: 2

17 Mar 2005

3040-01-529-8665
Extension Shaft

015298665
RD-4-6076-0P: RNCC: 3 | RNVC: 2
RD-4-6076-0: RNCC: 5 | RNVC: 9

5 May 2005

3040-01-529-6310
Shouldered Shaft

015296310
21-11: RNCC: 3 | RNVC: 2
21-11: RNCC: 5 | RNVC: 9

25 Apr 2005

3040-01-532-0839
A Emer Toggle Shaft

015320839
B44054-1: RNCC: 3 | RNVC: 2
B44054: RNCC: D | RNVC: 9

28 Jul 2005

3040-01-532-0950
Aircr Support Shaft

015320950
110354-1: RNCC: 3 | RNVC: 2

28 Jul 2005

3040-01-530-2203
Spur Gearshaft

015302203
3949357: RNCC: 3 | RNVC: 2

18 May 2005

3040-01-532-2968
Rigid Connecting Link

015322968
901-301-023-119: RNCC: 3 | RNVC: 2

4 Aug 2005

3040-01-532-4813
Flexible Shaft Assembly

015324813
2205329/0: RNCC: 3 | RNVC: 9
2205329/0: RNCC: 5 | RNVC: 2
2205329/0: RNCC: 5 | RNVC: 9
2205329/0: RNCC: 5 | RNVC: 9

10 Aug 2005

3040-01-532-9164
Pivot Shaft Assembly

015329164
65302-12560-109: RNCC: 3 | RNVC: 2
65302-12560-109: RNCC: 5 | RNVC: 2
65302-12560: RNCC: D | RNVC: 9

24 Aug 2005

3040-01-533-1828
Spur Gearshaft

015331828
00-874277: RNCC: 3 | RNVC: 2
F-43069 PG9 PL-56511 P/N 25: RNCC: 5 | RNVC: 2

6 Sep 2005

3040-01-531-0819
Counterbalance Weight

015310819
9127M56P04: RNCC: 3 | RNVC: 2

21 Jun 2005

3040-01-535-0829
Rigid Connecting Link

015350829
106A0208: RNCC: 3 | RNVC: 2

15 Nov 2005

3040-01-537-4183
Rigid Connecting Link

015374183
527-14908-4: RNCC: 3 | RNVC: 2

7 Feb 2006

3040-01-537-3180
Control Cam

015373180
039-048-00: RNCC: 3 | RNVC: 9

2 Feb 2006

3040-01-538-0829
Housing Adapter

015380829
4083195: RNCC: 3 | RNVC: 2
4083195: RNCC: 5 | RNVC: 2
CV187047: RNCC: 5 | RNVC: 2
4083195: RNCC: 5 | RNVC: 2

9 Mar 2006

3040-01-538-4735
Linear Actuating Cylinder Piston Rod

015384735
3-B9623-1: RNCC: 3 | RNVC: 2
B9622-1 ITEM 7: RNCC: 5 | RNVC: 2

23 Mar 2006

3040-01-538-4731
Linear Actuating Cylinder Piston Rod

015384731
3-B9822: RNCC: 3 | RNVC: 2
B9807 ITEM 5: RNCC: 5 | RNVC: 2

23 Mar 2006

3040-01-540-3739
Control Cam

015403739
0338742: RNCC: 3 | RNVC: 9
0338742: RNCC: 5 | RNVC: 2

17 May 2006

3040-01-541-8789
Ball Joint

015418789
007675: RNCC: 3 | RNVC: 2

14 Jul 2006

3040-01-542-2660
Rigid Connecting Link

015422660
1101203: RNCC: 3 | RNVC: 2
1101203: RNCC: 3 | RNVC: 9

27 Jul 2006

3040-01-543-3372
Straight Shaft

015433372
7T6581: RNCC: 3 | RNVC: 2

8 Sep 2006

3040-01-543-3592
Linear Actuating Cylinder Assembly

015433592
306-85-5: RNCC: 3 | RNVC: 2
1001256: RNCC: 5 | RNVC: 1

11 Sep 2006

3040-01-543-6736
Shouldered Shaft

015436736
8978-040-00S: RNCC: 3 | RNVC: 2

19 Sep 2006

3040-01-545-0097
Remote Control Lever

015450097
6289635: RNCC: 3 | RNVC: 2

30 Oct 2006

3040-01-545-0540
Linear Actuating Cylinder Head

015450540
595/10061: RNCC: 3 | RNVC: 2

31 Oct 2006

3040-01-545-0797
Rigid Connecting Link

015450797
8728-006-00N: RNCC: 3 | RNVC: 2

1 Nov 2006

3040-01-545-9550
Push-Pull Control Assembly

015459550
CCX63334: RNCC: 3 | RNVC: 2
301947-003-408: RNCC: 5 | RNVC: 9

30 Nov 2006

3040-01-546-4092
Housing Adapter

015464092
158552-51151: RNCC: 3 | RNVC: 2
158552-51151: RNCC: 3 | RNVC: 9

14 Dec 2006

3040-01-546-5044
Body Hub

015465044
12312-999-000: RNCC: 3 | RNVC: 2
12221PL FIND 2 PN 12312-999-000: RNCC: 5 | RNVC: 2
12221: RNCC: D | RNVC: 9

19 Dec 2006

3040-01-548-5467
Crankshaft

015485467
752-7068502-98: RNCC: 3 | RNVC: 2
H832-1684-98: RNCC: 5 | RNVC: 2
H832-1684-89: RNCC: 5 | RNVC: 9
752-7068502-89: RNCC: 5 | RNVC: 9

27 Feb 2007

3040-01-548-6409
Rotary Actuating Cylinder Assembly

015486409
87454016: RNCC: 3 | RNVC: 2
1346190C2: RNCC: 5 | RNVC: 9

28 Feb 2007

3040-01-549-2406
Worm Wheel Gearshaft

015492406
47703M-442-000: RNCC: 3 | RNVC: 2
40201 PL FN29: RNCC: 5 | RNVC: 9
PC47703-442-000: RNCC: 5 | RNVC: 9

15 Mar 2007

3040-01-549-3977
Linear Actuating Cylinder Assembly

015493977
199721A1: RNCC: 3 | RNVC: 2

20 Mar 2007

3040-01-550-0382
Hydraulic Accumulator Bladder

015500382
1352561003: RNCC: 3 | RNVC: 2
BA005X364 IT 2: RNCC: 5 | RNVC: 9
1352561003: RNCC: 5 | RNVC: 9

5 Apr 2007

3040-01-551-9169
Shaft Retaining Plate

015519169
D-WK-871-25 PC13: RNCC: 3 | RNVC: 2
H-WK-871-2 PC13: RNCC: 5 | RNVC: 2

31 May 2007

3040-01-552-9105
Ball Joint

015529105
99520021201: RNCC: 3 | RNVC: 2
99520021201: RNCC: 3 | RNVC: 9
011663-18: RNCC: 5 | RNVC: 9
362253-006: RNCC: 5 | RNVC: 9

28 Jun 2007

3040-01-553-9500
Electrical-Fluid Pressure Connector Assembly

015539500
42487412: RNCC: 3 | RNVC: 2
42487412: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-1779
Rigid Connecting Link

015541779
47059112: RNCC: 3 | RNVC: 2
47059112: RNCC: 5 | RNVC: 9

1 Aug 2007

3040-01-553-9335
Shouldered Shaft

015539335
40099812: RNCC: 3 | RNVC: 2
40099812: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-1782
Rigid Connecting Link

015541782
47066312: RNCC: 3 | RNVC: 2
47066312: RNCC: 5 | RNVC: 9

1 Aug 2007

3040-01-555-0082
Straight Shaft

015550082
42860719-02: RNCC: 3 | RNVC: 2
860101-IPB-ITEM48: RNCC: 5 | RNVC: 2

27 Aug 2007

3040-01-555-8099
Shaft Retaining Plate

015558099
27011612: RNCC: 3 | RNVC: 2
27011612: RNCC: 5 | RNVC: 9

14 Sep 2007

3040-01-556-3591
Rigid Connecting Link

015563591
4286964: RNCC: 3 | RNVC: 2
4286964: RNCC: 5 | RNVC: 2

2 Oct 2007

3040-01-557-6560
Rigid Connecting Link

015576560
R0073178: RNCC: 3 | RNVC: 2
R0073178: RNCC: 5 | RNVC: 2
R0073178-0102: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-558-4427
Rigid Connecting Link

015584427
3666476: RNCC: 3 | RNVC: 2
3666476: RNCC: 5 | RNVC: 9

9 Nov 2007

3040-01-559-8338
Shouldered Shaft

015598338
16211400-15: RNCC: 3 | RNVC: 9
16211400 ITEM 4: RNCC: 5 | RNVC: 1
16211400-15: RNCC: 5 | RNVC: 2

8 Jan 2008

3040-01-560-2377
Rigid Connecting Link

015602377
21C8029P20: RNCC: 3 | RNVC: 2

22 Jan 2008

3040-01-560-7706
Straight Shaft

015607706
188877-2: RNCC: 3 | RNVC: 2

12 Feb 2008

3040-01-560-9215
Straight Shaft

015609215
S1602-1022997 PC NO 18: RNCC: 3 | RNVC: 2

20 Feb 2008

3040-01-561-7387
Control Cam

015617387
42860111-02: RNCC: 3 | RNVC: 2
1PB860601PC14: RNCC: 5 | RNVC: 2
1PB860602PC14: RNCC: 5 | RNVC: 2

17 Mar 2008

3040-01-561-6718
Manual Release Kit

015616718
893420A01: RNCC: 3 | RNVC: 2
893420A01: RNCC: 5 | RNVC: 2

13 Mar 2008

3040-01-562-0209
Shaft Collar

015620209
3693627: RNCC: 3 | RNVC: 2
3693627: RNCC: 5 | RNVC: 9

26 Mar 2008

3040-01-562-1279
Rigid Connecting Link

015621279
BS000466: RNCC: 3 | RNVC: 2

31 Mar 2008

3040-01-562-1614
Straight Shaft

015621614
3616296-2: RNCC: 3 | RNVC: 2

1 Apr 2008

3040-01-562-5691
Rigid Connecting Link

015625691
74A661329-1005: RNCC: 3 | RNVC: 2

10 Apr 2008

3040-01-562-9347
Shouldered Shaft

015629347
3305AS1189-1: RNCC: 3 | RNVC: 2

25 Apr 2008

3040-01-563-2160
Linear Actuating Cylinder Piston Rod

015632160
25093870: RNCC: 3 | RNVC: 2
84AX333: RNCC: 5 | RNVC: 9

6 May 2008

3040-01-563-4409
Rigid Connecting Link

015634409
6031744: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-563-4385
Linear Actuating Cylinder Piston

015634385
8242895: RNCC: 3 | RNVC: 2

12 May 2008

3040-01-564-0299
Rod Assy - Hydraulic Lock

015640299
3683197C91: RNCC: 3 | RNVC: 2
3683197C91L: RNCC: 5 | RNVC: 9

3 Jun 2008

3040-01-564-0936
Rigid Connecting Link

015640936
803-6397268 PC 193: RNCC: 3 | RNVC: 2

4 Jun 2008

3040-01-564-2313
Control Cam

015642313
16874-63A-75: RNCC: 3 | RNVC: 2

10 Jun 2008

3040-01-564-6627
Rigid Connecting Link

015646627
803-6397268 PC 163: RNCC: 3 | RNVC: 2
803-6397268: RNCC: D | RNVC: 9

24 Jun 2008

3040-01-564-7911
Vehicular Components Bracket

015647911
3685168C1: RNCC: 3 | RNVC: 2
3685168C1L: RNCC: 5 | RNVC: 9

27 Jun 2008

3040-01-565-0352
Straight Shaft

015650352
25-45-0001: RNCC: 3 | RNVC: 9
25-45-0001: RNCC: 5 | RNVC: 2

9 Jul 2008

3040-01-566-3666
Mechanical Drive Housing

015663666
4504482: RNCC: 3 | RNVC: 2

28 Aug 2008

3040-01-566-4949
Spur Gearshaft

015664949
T294884: RNCC: 3 | RNVC: 2
T173843: RNCC: 5 | RNVC: 9

3 Sep 2008

3040-01-566-5575
Counterbalance Weight

015665575
AT343431: RNCC: 3 | RNVC: 2

4 Sep 2008

3040-01-566-9698
Motor Shaft Assy Wi

015669698
0505-RR8-003: RNCC: 3 | RNVC: 2

15 Sep 2008

3040-01-566-8331
Rigid Connecting Link

015668331
TV080034: RNCC: 3 | RNVC: 2
TV080034: RNCC: 5 | RNVC: 2

11 Sep 2008

3040-01-567-5835
Linear Actuating Cylinder

015675835
CA20147303: RNCC: 3 | RNVC: 2
3776616: RNCC: 5 | RNVC: 2
3588351: RNCC: 5 | RNVC: 9
3776616: RNCC: 7 | RNVC: 9

1 Oct 2008

3040-01-568-2009
Linear Actuating Cylinder Assembly

015682009
304-11.54: RNCC: 3 | RNVC: 2
3001166: RNCC: 5 | RNVC: 2

23 Oct 2008

3040-01-568-0150
Flexible Drive Shaft

015680150
120HD-HC: RNCC: 3 | RNVC: 2

16 Oct 2008

3040-01-568-4019
Linear Actuating Cylinder

015684019
12505561: RNCC: 3 | RNVC: 2

29 Oct 2008

3040-01-569-2844
Shouldered Shaft

015692844
3505-21028-40: RNCC: 3 | RNVC: 2

25 Nov 2008

3040-01-570-4440
Detent Plate

015704440
50C-0014-0290: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-570-6659
Body Hub

015706659
A9-333-A-4317: RNCC: 3 | RNVC: 2

8 Jan 2009

3040-01-571-9068
Shouldered Shaft

015719068
3392AS766: RNCC: 3 | RNVC: 2

20 Feb 2009

3040-01-572-7063
Mechanical Drive Housing

015727063
13015640: RNCC: 3 | RNVC: 2

20 Mar 2009

3040-01-573-3839
Spur Gearshaft

015733839
41131-ZY6-000: RNCC: 3 | RNVC: 9

21 Apr 2009

3040-01-573-7815
Helical Gearshaft

015737815
532257-1: RNCC: 3 | RNVC: 2
532257-1: RNCC: 5 | RNVC: 9
532257: RNCC: D | RNVC: 9

5 May 2009

3040-01-573-3976
Breather

015733976
N260H001-IT9A: RNCC: 3 | RNVC: 2
DC2: RNCC: 5 | RNVC: 9

21 Apr 2009

3040-01-573-9911
Shouldered Shaft

015739911
111956001: RNCC: 3 | RNVC: 2
111956001: RNCC: 5 | RNVC: 2

12 May 2009

3040-01-574-5546
Linear Actuating Cylinder Assembly

015745546
2087642: RNCC: 3 | RNVC: 2
2087642: RNCC: 5 | RNVC: 2

1 Jun 2009

3040-01-574-5820
Differential Gear Unit

015745820
139245: RNCC: 3 | RNVC: 9
6292E21-ITEM23: RNCC: 5 | RNVC: 2

2 Jun 2009

3040-01-575-6424
Tension Spring Assembly

015756424
07-09485-000: RNCC: 3 | RNVC: 2

10 Jul 2009

3040-01-575-7667
Rigid Connecting Link

015757667
18-51378-000: RNCC: 3 | RNVC: 2
16-51378: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-575-7725
Rigid Connecting Link

015757725
A16-18930-000: RNCC: 3 | RNVC: 2
A16-18930: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-577-4985
Mechanical Drive Housing

015774985
3817499: RNCC: 3 | RNVC: 2
3817499: RNCC: 5 | RNVC: 9

9 Sep 2009

3040-01-577-9842
Shaft Idler

015779842
R0097744: RNCC: 3 | RNVC: 2
R0097744: RNCC: 5 | RNVC: 2
R0097744-0102: RNCC: D | RNVC: 9

23 Sep 2009

3040-01-577-3669
Ball Joint

015773669
3831461: RNCC: 3 | RNVC: 2
3831461: RNCC: 5 | RNVC: 9

3 Sep 2009

3040-01-581-6665
Push-Pull Control Assembly

015816665
6620466-1: RNCC: 3 | RNVC: 2
10340170: RNCC: 6 | RNVC: 9

25 Jan 2010

3040-01-581-8446
Manual Control Lever

015818446
0350592: RNCC: 3 | RNVC: 2

29 Jan 2010

3040-01-582-8245
Hub Clamp

015828245
S3600Y-C125: RNCC: 3 | RNVC: 2

9 Mar 2010

3040-01-583-5653
Tension Spring Assembly

015835653
951-41V-0008-00: RNCC: 3 | RNVC: 2

30 Mar 2010

3040-01-582-4449
Straight Shaft

015824449
3807704: RNCC: 3 | RNVC: 2
3807704: RNCC: 5 | RNVC: 9

22 Feb 2010

3040-01-584-5124
Linear Actuating Cylinder

015845124
0974301: RNCC: 3 | RNVC: 2

28 Apr 2010

3040-01-584-5575
Ball Joint

015845575
63215K39: RNCC: 3 | RNVC: 2

29 Apr 2010

3040-01-584-6889
Rigid Connecting Link

015846889
450-060-912-101: RNCC: 3 | RNVC: 2

4 May 2010

3040-01-584-9705
Offset Clevis

015849705
03002A5091: RNCC: 3 | RNVC: 2

12 May 2010

3040-01-585-2510
Planetary Gears Carrier

015852510
29502046: RNCC: 3 | RNVC: 2

20 May 2010

3040-01-585-0459
Rigid Connecting Link

015850459
6448994-01M1: RNCC: 3 | RNVC: 2
6448994-01M1: RNCC: 3 | RNVC: 9
6448994-01M1: RNCC: 5 | RNVC: 2

13 May 2010

3040-01-585-6796
Spur Gearshaft

015856796
3955150: RNCC: 3 | RNVC: 2
4934418: RNCC: 5 | RNVC: 9

3 Jun 2010

3040-01-586-2121
Straight Shaft

015862121
30295-1083: RNCC: 3 | RNVC: 2
40001268-01: RNCC: 5 | RNVC: 2
30295-1083: RNCC: 5 | RNVC: 9

18 Jun 2010

3040-01-586-8956
Ball Joint

015868956
3950-6: RNCC: 3 | RNVC: 2

19 Jul 2010

3040-01-588-3068
Rigid Connecting Link

015883068
107147: RNCC: 3 | RNVC: 2

13 Sep 2010

3040-01-588-4188
Shouldered Shaft

015884188
41010959-200: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-588-4192
Shouldered Shaft

015884192
41010959-185: RNCC: 3 | RNVC: 2

16 Sep 2010

3040-01-588-6743
Brake Shoe Set

015886743
95SK341: RNCC: 3 | RNVC: 2
95SK341: RNCC: 5 | RNVC: 9

29 Sep 2010

3040-01-591-0666
Manual Control Lever

015910666
4604594: RNCC: 3 | RNVC: 2
2090110: RNCC: 5 | RNVC: 2
4604594: RNCC: 5 | RNVC: 2
4604694: RNCC: 5 | RNVC: 9

10 Jan 2011

3040-01-592-5229
Rigid Connecting Link

015925229
3922AS168-1: RNCC: 3 | RNVC: 2

9 Mar 2011

3040-01-593-2879
Pivot Shaft Assembly

015932879
771846: RNCC: 3 | RNVC: 2

6 Apr 2011

3040-01-593-9495
Shouldered Shaft

015939495
3927430: RNCC: 3 | RNVC: 2
3927430: RNCC: 5 | RNVC: 9

22 Apr 2011

3040-01-595-6023
Remote Control Lever

015956023
5250841: RNCC: 3 | RNVC: 2

3 May 2011

3040-01-595-7171
Mechanical Drive Housing

015957171
A-3201-L-9294: RNCC: 3 | RNVC: 2

5 May 2011

3040-01-596-5584
Shouldered Shaft

015965584
471B-23: RNCC: 3 | RNVC: 2

19 May 2011

3040-01-597-1155
Shaft Idler

015971155
SYLC-1674: RNCC: 3 | RNVC: 2

27 May 2011

3040-01-598-0309
Straight Shaft

015980309
OXS6X180: RNCC: 3 | RNVC: 2
40071582: RNCC: 5 | RNVC: 2

28 Jun 2011

3040-01-601-0942
Shouldered Shaft

016010942
52720818: RNCC: 3 | RNVC: 2
4253623: RNCC: 5 | RNVC: 2
24KP267: RNCC: 5 | RNVC: 2
24KP267: RNCC: 5 | RNVC: 9
4253623: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-602-3268
Control Cable Assembly

016023268
09-2805393-1: RNCC: 3 | RNVC: 2

28 Jan 2012

3040-01-604-5909
Upper Tilt Shaft

016045909
99625003: RNCC: 3 | RNVC: 2

9 Apr 2012

3040-01-604-7722
Shaft Idler

016047722
14555-ZY3-003: RNCC: 3 | RNVC: 9

13 Apr 2012

3040-01-605-4376
Rigid Connecting Link

016054376
65070-20123-041: RNCC: 3 | RNVC: 2

19 Apr 2012

3040-01-605-8928
Shaft Retaining Plate

016058928
804AS204: RNCC: 1 | RNVC: 2
DVBCM-015: RNCC: 3 | RNVC: 2

30 Apr 2012

3040-01-605-1158
Nonaircraft Mechanical Actuator

016051158
8M0124413: RNCC: 3 | RNVC: 2
864289A03: RNCC: 5 | RNVC: 9
8M0048114: RNCC: 5 | RNVC: 9

16 Apr 2012

3040-01-606-7343
Nonaircraft Mechanical Actuator

016067343
ED3UW: RNCC: 3 | RNVC: 2

23 May 2012

3040-01-606-8758
Shouldered Shaft Assembly

016068758
123L40010-601: RNCC: 3 | RNVC: 2
123L40010-601: RNCC: 5 | RNVC: 9

25 May 2012

3040-01-607-3165
Flexible Shaft Assembly

016073165
2ABE12007: RNCC: 3 | RNVC: 2
2ABE12007: RNCC: 3 | RNVC: 9

8 Jun 2012

3040-01-531-5706
Rigid Connecting Link

015315706
12479391: RNCC: 3 | RNVC: 2

14 Jul 2005

3040-01-531-6787
Shaft Collar

015316787
111685: RNCC: 3 | RNVC: 2

19 Jul 2005

3040-01-530-6845
Shaft Collar

015306845
7550138-6: RNCC: 3 | RNVC: 2
7550079-31: RNCC: 5 | RNVC: 1
G545-4102-31: RNCC: 5 | RNVC: 1
G545-4105-6: RNCC: 5 | RNVC: 2
7550138-6: RNCC: 5 | RNVC: 2

8 Jun 2005

3040-01-532-1883
Rigid Connecting Link

015321883
000993-153-1: RNCC: 3 | RNVC: 2
000993-153: RNCC: D | RNVC: 9

1 Aug 2005

3040-01-532-6092
Linear Actuating Cylinder Assembly

015326092
828-006-745: RNCC: 3 | RNVC: 2
540-047/255: RNCC: 5 | RNVC: 9
9404-074: RNCC: 5 | RNVC: 9

15 Aug 2005

3040-01-535-6537
Bell Crank Support

015356537
12469671: RNCC: 3 | RNVC: 2

7 Dec 2005

3040-01-537-3165
Remote Control Lever

015373165
047-019-00: RNCC: 3 | RNVC: 9

2 Feb 2006

3040-01-557-6497
Metallic Pipe

015576497
AH39-1 50X25-02: RNCC: 3 | RNVC: 2
R0084297: RNCC: 5 | RNVC: 2
R0084297: RNCC: 5 | RNVC: 9
R0084297: RNCC: 7 | RNVC: 2
R0084297-0301: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-570-4480
Rigid Connecting Link

015704480
N9535: RNCC: 3 | RNVC: 2
22KP949: RNCC: 5 | RNVC: 1

31 Dec 2008

3040-01-579-0391
Linear Actuating Cylinder Assembly Parts Kit

015790391
1031576: RNCC: 3 | RNVC: 2
V013347: RNCC: 3 | RNVC: 9

28 Oct 2009

3040-01-607-0025
Linear Actuating Cylinder Assembly

016070025
333/E3473: RNCC: 3 | RNVC: 2
347/00512: RNCC: 5 | RNVC: 9

29 May 2012

3040-01-528-1703
Nonaircraft Mechanical Actuator

015281703
APC30210: RNCC: 3 | RNVC: 2
APC30210: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-528-6520
Bearing Press Assembly Driver Shaft

015286520
7001126: RNCC: 3 | RNVC: 2

21 Mar 2005

3040-01-528-7660
Rigid Connecting Link

015287660
6-39387-21: RNCC: 3 | RNVC: 2
6-39387: RNCC: D | RNVC: 9

24 Mar 2005

3040-01-529-1517
Rigid Connecting Link

015291517
HPB450-3: RNCC: 3 | RNVC: 2

6 Apr 2005

3040-01-530-7688
Hev Gear

015307688
1000958: RNCC: 3 | RNVC: 2

10 Jun 2005

3040-01-530-6830
Straight Shaft

015306830
7550138-3: RNCC: 3 | RNVC: 2
7550079-21: RNCC: 5 | RNVC: 1
G545-4102-21: RNCC: 5 | RNVC: 1
G545-4105-3: RNCC: 5 | RNVC: 2
7550138-3: RNCC: 5 | RNVC: 2

8 Jun 2005

3040-01-530-8587
Ball Joint

015308587
RAM-101: RNCC: 3 | RNVC: 2
5031T61: RNCC: 5 | RNVC: 2
13022338: RNCC: 7 | RNVC: 2

14 Jun 2005

3040-01-531-0818
Counterbalance Weight

015310818
9127M56P03: RNCC: 3 | RNVC: 2

21 Jun 2005

3040-01-530-9873
Linear Actuating Cylinder Assembly

015309873
D-WK-861-7 PC6: RNCC: 3 | RNVC: 2
D-WK-861-13: RNCC: 5 | RNVC: 2

20 Jun 2005

3040-01-531-5216
Rigid Connecting Link

015315216
12489288: RNCC: 3 | RNVC: 2

13 Jul 2005

3040-01-532-0704
Control Cam

015320704
113339-1: RNCC: 3 | RNVC: 2

27 Jul 2005

3040-01-532-1452
Rigid Connecting Link

015321452
123CSM11818-1: RNCC: 3 | RNVC: 2
123CSM11818-1: RNCC: 5 | RNVC: 2
123CSM11818-1: RNCC: 5 | RNVC: 9
123CSM11818-1: RNCC: 5 | RNVC: 9
123CSM11818-1: RNCC: 5 | RNVC: 9
123CSM1818: RNCC: D | RNVC: 9

29 Jul 2005

3040-01-532-1500
Latch Spring

015321500
054-00286: RNCC: 3 | RNVC: 2

29 Jul 2005

3040-01-532-6572
Piston Rod Guide

015326572
131221CF: RNCC: 3 | RNVC: 2
PLC-13124 PC 2: RNCC: 5 | RNVC: 2

16 Aug 2005

3040-01-535-0443
Rigid Connecting Link

015350443
3468AS1106-2: RNCC: 3 | RNVC: 2
3468AS1106-2: RNCC: 5 | RNVC: 9

14 Nov 2005

3040-01-535-1884
Mechanically Actuated Spindle

015351884
803-6397269 REV A PC 122: RNCC: 3 | RNVC: 2

18 Nov 2005

3040-01-537-8674
Shouldered Shaft

015378674
HM025-704-1: RNCC: 3 | RNVC: 2

28 Feb 2006

3040-01-537-9859
Control Cam

015379859
202221-1P: RNCC: 3 | RNVC: 2
202221-1: RNCC: 3 | RNVC: 9

7 Mar 2006

3040-01-538-6216
Bell Crank Support

015386216
68A610052-1001: RNCC: 3 | RNVC: 2

28 Mar 2006

3040-01-539-6330
Shouldered Shaft

015396330
029562-3: RNCC: 3 | RNVC: 2

27 Apr 2006

3040-01-540-2427
Shouldered Shaft

015402427
12441889: RNCC: 3 | RNVC: 2

12 May 2006

3040-01-540-3484
Linear Actuating Cylinder Assembly

015403484
5005114: RNCC: 3 | RNVC: 9
5005114: RNCC: 5 | RNVC: 2

16 May 2006

3040-01-540-3746
Control Cam

015403746
0335592: RNCC: 3 | RNVC: 9
0335592: RNCC: C | RNVC: 1

17 May 2006

3040-01-541-4748
Detent Plate

015414748
29915-01E: RNCC: 3 | RNVC: 2
205101 ITEM 17: RNCC: 5 | RNVC: 2

28 Jun 2006

3040-01-541-5739
Linear Actuating Cylinder Cap

015415739
1078901: RNCC: 3 | RNVC: 2

30 Jun 2006

3040-01-539-9438
Ball Joint Head

015399438
MT10-1128: RNCC: 3 | RNVC: 2
3001945: RNCC: 5 | RNVC: 2

4 May 2006

3040-01-544-3366
Manual Control Lever Assembly

015443366
0501 211 287: RNCC: 3 | RNVC: 2
04/801301: RNCC: 5 | RNVC: 2

11 Oct 2006

3040-01-545-5530
Linear Actuating Cylinder Assembly

015455530
347/21008: RNCC: 3 | RNVC: 2

16 Nov 2006

3040-01-545-7658
Shouldered Shaft

015457658
7360-001: RNCC: 3 | RNVC: 2
158-3529-001 ITEM 9: RNCC: 5 | RNVC: 2

27 Nov 2006

3040-01-546-9404
Brake Shoe Set

015469404
554H-31A-410C: RNCC: 3 | RNVC: 2
554H-31A-410C: RNCC: 3 | RNVC: 2

9 Jan 2007

3040-01-547-1823
Remote Control Lever

015471823
D124528: RNCC: 3 | RNVC: 2

12 Jan 2007

3040-01-548-1324
Straight Shaft

015481324
104414: RNCC: 3 | RNVC: 2

9 Feb 2007

3040-01-548-2474
Pawl

015482474
226398-01: RNCC: 3 | RNVC: 2

15 Feb 2007

3040-01-548-6078
Hrm Idler Hub

015486078
HU6H3000IDT-PT: RNCC: 3 | RNVC: 2

28 Feb 2007

3040-01-548-5599
Shouldered Shaft

015485599
12446204: RNCC: 3 | RNVC: 2

27 Feb 2007

3040-01-548-7230
Push-Pull Control Assembly

015487230
TYPE 98, 3" STROKE: RNCC: 3 | RNVC: 2
F057783 IT 53: RNCC: 5 | RNVC: 2
F059848: RNCC: 5 | RNVC: 2

2 Mar 2007

3040-01-548-7815
Rigid Connecting Link

015487815
122974A1: RNCC: 3 | RNVC: 2

5 Mar 2007

3040-01-549-2422
Shouldered Shaft

015492422
PB52579-151-000: RNCC: 3 | RNVC: 2
40210 PL FN4: RNCC: 5 | RNVC: 2

15 Mar 2007

3040-01-550-5885
Linear Actuating Cylinder

015505885
412915: RNCC: 3 | RNVC: 2
412915: RNCC: 5 | RNVC: 9

24 Apr 2007

3040-01-550-6494
Linear Actuating Cylinder

015506494
295-6951: RNCC: 3 | RNVC: 2
230-3695: RNCC: 5 | RNVC: 9

25 Apr 2007

3040-01-551-1318
Rigid Connecting Link

015511318
2006A1010: RNCC: 3 | RNVC: 2

8 May 2007

3040-01-551-4646
Worm Shaft

015514646
1994-247: RNCC: 3 | RNVC: 2
1994-247-00: RNCC: D | RNVC: 9

17 May 2007

3040-01-551-9173
Shouldered Shaft

015519173
D-WK-871-29 PC12: RNCC: 3 | RNVC: 2
H-WK-871-3 PC12: RNCC: 5 | RNVC: 1

31 May 2007

3040-01-552-8090
Shouldered Shaft

015528090
3-P-1049X: RNCC: 3 | RNVC: 2
3699472: RNCC: 5 | RNVC: 2
3-P-831: RNCC: 5 | RNVC: 9
3699472: RNCC: 5 | RNVC: 9

25 Jun 2007

3040-01-552-6971
Straight Shaft

015526971
300034-2: RNCC: 3 | RNVC: 2
300034-2: RNCC: 3 | RNVC: 9
300184 R10 FIND NO. 4: RNCC: 5 | RNVC: 9
300184 R10 FIND NO. 4: RNCC: C | RNVC: 1

21 Jun 2007

3040-01-553-6276
Adaption Kit

015536276
41736312: RNCC: 3 | RNVC: 2
41736312: RNCC: 5 | RNVC: 9

20 Jul 2007

3040-01-553-8377
Linear Actuating Cylinder

015538377
16211602-2: RNCC: 3 | RNVC: 2
16211602-2: RNCC: 3 | RNVC: 9
16211600 PC23: RNCC: 5 | RNVC: 9
16211600 PC23: RNCC: C | RNVC: 1

26 Jul 2007

3040-01-553-9031
Linear Actuating Cylinder

015539031
19571612: RNCC: 3 | RNVC: 2
19571612: RNCC: 5 | RNVC: 9

27 Jul 2007

3040-01-554-2607
Mechanical Drive Housing Part

015542607
29537009: RNCC: 3 | RNVC: 2

3 Aug 2007

3040-01-552-0087
Counterbalance Weight

015520087
38150-09424-103: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-555-6824
Shouldered Shaft Assembly

015556824
191925: RNCC: 3 | RNVC: 2
20864047: RNCC: 5 | RNVC: 2
20864004 FN2: RNCC: 5 | RNVC: 2
20864004: RNCC: D | RNVC: 9

11 Sep 2007

3040-01-555-9083
Rigid Connecting Link

015559083
21C14800P16: RNCC: 3 | RNVC: 2
21C14800P16: RNCC: 5 | RNVC: 2

18 Sep 2007

3040-01-556-4189
Shouldered Shaft

015564189
4286883: RNCC: 3 | RNVC: 2
4286883: RNCC: 5 | RNVC: 2

2 Oct 2007

3040-01-556-4550
Spur Gearshaft

015564550
KIT2318: RNCC: 3 | RNVC: 2
1653986C91: RNCC: 5 | RNVC: 2

3 Oct 2007

3040-01-556-5257
Shouldered Shaft

015565257
2504889C91: RNCC: 3 | RNVC: 2

3 Oct 2007

3040-01-557-5423
Bell Crank

015575423
R0075797: RNCC: 3 | RNVC: 2
R0075797: RNCC: 5 | RNVC: 2
R0075797-0107: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-557-6427
Extension Shaft

015576427
R0070824: RNCC: 3 | RNVC: 2
BRI 0015: RNCC: 5 | RNVC: 2
R0070824: RNCC: 5 | RNVC: 2
PH175: RNCC: 5 | RNVC: 2
R0070824-0301: RNCC: D | RNVC: 9

25 Oct 2007

3040-01-558-6805
Counterbalance Weight

015586805
2116M38P03: RNCC: 3 | RNVC: 2

19 Nov 2007

3040-01-558-3895
Straight Shaft

015583895
4F19311-103A: RNCC: 3 | RNVC: 2

7 Nov 2007

3040-01-560-8088
Helical Gear And Shaft Assembly

015608088
5397-6: RNCC: 3 | RNVC: 2

13 Feb 2008

3040-01-561-1428
Shaft Retaining Plate

015611428
F1XWH6-10.5: RNCC: 3 | RNVC: 2
F1XWH-10.5: RNCC: 5 | RNVC: 9
F1XWH6-10.5: RNCC: 5 | RNVC: 9
1497-N47: RNCC: 5 | RNVC: 9

26 Feb 2008

3040-01-561-7099
Shouldered Shaft

015617099
19755T 7: RNCC: 3 | RNVC: 2
19755T 7: RNCC: 5 | RNVC: 2

14 Mar 2008

3040-01-563-1328
Rigid Connecting Link

015631328
414S1716-1: RNCC: 3 | RNVC: 2

2 May 2008

Load More Results