What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 118 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 118of 575

3040-01-625-6522
Linear Actuating Cylinder Assembly

016256522
4012251: RNCC: 1 | RNVC: 2
121461B: RNCC: 3 | RNVC: 2
4012251: RNCC: 5 | RNVC: 9

11 Feb 2014

3040-01-626-6183
Shouldered Shaft

016266183
8555396: RNCC: 3 | RNVC: 2

18 Mar 2014

3040-01-627-0113
Straight Shaft

016270113
4994603: RNCC: 3 | RNVC: 2

28 Mar 2014

3040-01-627-0505
Shouldered Shaft Assembly

016270505
29558949: RNCC: 3 | RNVC: 2
29548947: RNCC: 3 | RNVC: 9

31 Mar 2014

3040-01-627-0637
Counterbalance Weight

016270637
8475529: RNCC: 3 | RNVC: 2

1 Apr 2014

3040-01-627-1971
Nonaircraft Mechanical Actuator

016271971
KFS4730-LA36-ACT: RNCC: 3 | RNVC: 2
12538913: RNCC: 7 | RNVC: 2

4 Apr 2014

3040-01-627-9398
Rigid Connecting Link

016279398
14003617: RNCC: 3 | RNVC: 2
14003617: RNCC: 3 | RNVC: 9

2 May 2014

3040-01-628-4286
Linear Actuating Cylinder Assembly

016284286
5373-1: RNCC: 3 | RNVC: 2
5373-1: RNCC: 7 | RNVC: 2

23 May 2014

3040-01-631-0981
Rigid Connecting Link

016310981
27M-282: RNCC: 3 | RNVC: 2

29 Aug 2014

3040-01-629-9600
Straight Shaft

016299600
27M-248-2: RNCC: 3 | RNVC: 2
EACD-824MF1-3W-HB-ITEM3: RNCC: C | RNVC: 1

21 Jul 2014

3040-01-630-0170
Mechanical Drive Housing

016300170
880686T25: RNCC: 3 | RNVC: 2

23 Jul 2014

3040-01-632-3578
Straight Shaft

016323578
300034-3: RNCC: 3 | RNVC: 2
300184ITEM4: RNCC: 5 | RNVC: 2

16 Oct 2014

3040-01-630-3933
Spline Adapter

016303933
45M-836: RNCC: 3 | RNVC: 2
EACD-824MF1-3W-HB-ITEM2: RNCC: 5 | RNVC: 2

1 Aug 2014

3040-01-633-1729
Remote Control Lever

016331729
9720-15: RNCC: 3 | RNVC: 2

12 Nov 2014

3040-01-641-7043
Planetary Gears Carrier

016417043
29547414: RNCC: 3 | RNVC: 2

29 Jan 2015

3040-01-641-7462
Linear Actuating Cylinder Assembly

016417462
MIL-001-203: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-642-1572
Linear Actuating Cylinder Piston Rod

016421572
201309308-01: RNCC: 3 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2
201309308-01: RNCC: 5 | RNVC: 2

14 Feb 2015

3040-01-645-4140
Sheave Pin

016454140
F160295: RNCC: 3 | RNVC: 2
F160402 ITEM 3: RNCC: C | RNVC: 1

15 Jun 2015

3040-01-645-4412
Shaft Collar

016454412
CL5 SS: RNCC: 3 | RNVC: 2

16 Jun 2015

3040-01-644-2207
Extension Shaft

016442207
MT-EXT: RNCC: 3 | RNVC: 2

27 Apr 2015

3040-01-646-0936
Tension Spring Assembly

016460936
12543058: RNCC: 3 | RNVC: 2

13 Jul 2015

3040-01-646-9089
Brake Disc

016469089
TCR426224430: RNCC: 3 | RNVC: 2
EDOC0135 REV 2 ITEM 73: RNCC: C | RNVC: 1

4 Aug 2015

3040-01-647-1790
Linear Actuating Cylinder

016471790
EP-0021213: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-647-3448
Shouldered Shaft

016473448
7-4648-3: RNCC: 3 | RNVC: 2

19 Aug 2015

3040-01-647-7577
Straight Shaft

016477577
20-1312-84-20: RNCC: 3 | RNVC: 2
20-1312-84-23: RNCC: 5 | RNVC: 9

31 Aug 2015

3040-01-649-7409
Control Pedal Assembly

016497409
12580271: RNCC: 3 | RNVC: 2

9 Nov 2015

3040-01-652-8234
Spur Gearshaft

016528234
67411643-1: RNCC: 3 | RNVC: 2
67411643-1: RNCC: 5 | RNVC: 2

4 Mar 2016

3040-01-652-9926
Linear Actuating Cylinder Piston Rod

016529926
EP-0021832: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-654-4200
Straight Shaft Assembly

016544200
256T5710-215: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-654-4242
Straight Shaft Assembly

016544242
256T5710-131: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-653-3157
Pneumatic Actuator Cylinder Housing

016533157
EP-0021967: RNCC: 3 | RNVC: 2

18 Mar 2016

3040-01-656-2790
Control Cam

016562790
593-7067139-281: RNCC: 3 | RNVC: 2
H577-3302-281: RNCC: 5 | RNVC: 2

23 Jun 2016

3040-01-655-1893
Mechanical Drive Housing

016551893
8294A16: RNCC: 3 | RNVC: 2

20 May 2016

3040-01-656-5528
Shouldered Shaft

016565528
ZF4646.355.046: RNCC: 3 | RNVC: 9
4646.355.046: RNCC: 5 | RNVC: 9

8 Jul 2016

3040-01-658-3858
Rigid Connecting Link

016583858
250N2004-1124: RNCC: 3 | RNVC: 2

23 Sep 2016

3040-01-658-1452
Linear Actuating Cylinder Assembly

016581452
3871090: RNCC: 3 | RNVC: 2
M16100: RNCC: 3 | RNVC: 2

14 Sep 2016

3040-01-659-3081
Piston Ring

016593081
ZF0899317869: RNCC: 3 | RNVC: 2
0899.317.869: RNCC: 3 | RNVC: 9
ZF0899317869: RNCC: 5 | RNVC: 2
0899.317.869: RNCC: 5 | RNVC: 9

17 Nov 2016

3040-01-661-0852
Nonaircraft Mechanical Actuator

016610852
S753300108-03: RNCC: 3 | RNVC: 2
663588 FIND NO. 6: RNCC: C | RNVC: 1
663588: RNCC: D | RNVC: 9

15 Feb 2017

3040-01-662-1088
Control Cam

016621088
617227018: RNCC: 3 | RNVC: 2
617257007 REV - FIND NO 5: RNCC: 5 | RNVC: 2

27 Mar 2017

3040-01-662-6252
Rigid Connecting Link

016626252
747049K01: RNCC: 3 | RNVC: 2
747049-K1: RNCC: 3 | RNVC: 9

13 Apr 2017

3040-01-662-3393
Straight Shaft

016623393
6653110-1: RNCC: 3 | RNVC: 2

4 Apr 2017

3040-01-666-0618
Pawl

016660618
1103-1937-01: RNCC: 3 | RNVC: 2

22 Aug 2017

3040-01-664-9394
Straight Shaft

016649394
EP-0001586: RNCC: 3 | RNVC: 2
9238280767: RNCC: 5 | RNVC: 9

12 Jul 2017

3040-01-669-7848
Pointer Shaft

016697848
BB-8002340-1: RNCC: 3 | RNVC: 2

22 Jan 2018

3040-01-670-5648
Gear Pin Hub

016705648
071-1542787: RNCC: 3 | RNVC: 2

27 Feb 2018

3040-01-672-9037
Spur Gearshaft

016729037
12602049: RNCC: 3 | RNVC: 2
12602049: RNCC: 3 | RNVC: 2

22 May 2018

3040-01-675-0768
Rigid Connecting Link

016750768
HJ109215: RNCC: 3 | RNVC: 2

21 Aug 2018

3040-01-675-3102
Nonaircraft Mechanical Actuator

016753102
378-1020: RNCC: 3 | RNVC: 2

4 Sep 2018

3040-01-677-3830
Manual Control Lever Assembly

016773830
352 9100 110: RNCC: 3 | RNVC: 9

11 Dec 2018

3040-01-677-6856
Shouldered Shaft

016776856
901-211-001-113: RNCC: 3 | RNVC: 2
901-211-001: RNCC: D | RNVC: 9

28 Dec 2018

3040-01-678-7235
Manual Control Lever

016787235
BB-8007800-1: RNCC: 3 | RNVC: 2

22 Feb 2019

3040-01-678-7801
Extension Shaft

016787801
2X36-HSL: RNCC: 3 | RNVC: 2

26 Feb 2019

3040-01-683-0000
Nonrotating Shaft Eye Bracket

016830000
3890AS004514-01: RNCC: 3 | RNVC: 2
3890AS004514-01: RNCC: 5 | RNVC: 2

4 Sep 2019

3040-01-686-2916
Shouldered Shaft

016862916
36-3724: RNCC: 3 | RNVC: 2

6 Feb 2020

3040-01-686-3676
Shouldered Shaft

016863676
596-7410506-PN-13: RNCC: 3 | RNVC: 2
596-7410504-PN-10: RNCC: 5 | RNVC: 2
B434-5217-PN-10: RNCC: 5 | RNVC: 2
B434-5219-PN-13: RNCC: 5 | RNVC: 2
596-7410504: RNCC: D | RNVC: 9
596-7410506: RNCC: D | RNVC: 9

11 Feb 2020

3040-01-685-8112
Shaft And Tube Support Assembly

016858112
09203014-01: RNCC: 3 | RNVC: 2

14 Jan 2020

3040-01-689-4732
Flexible Drive Shaft

016894732
BB-8006882-1: RNCC: 3 | RNVC: 2

23 Jun 2020

3040-01-693-4951
Extension Shaft

016934951
MK-PVBG1K1342: RNCC: 3 | RNVC: 2

17 Feb 2021

3040-01-696-1257
Brake Backing Plate

016961257
H250T1-6000-4LH: RNCC: 3 | RNVC: 2

12 Jul 2021

3040-12-315-0939
Shouldered Shaft

123150939
5501740020: RNCC: 3 | RNVC: 2

15 Sep 1988

3040-12-317-0167
Shouldered Shaft

123170167
5550640003: RNCC: 3 | RNVC: 2
5550640003: RNCC: 5 | RNVC: 2
5550640003: RNCC: 5 | RNVC: 2
5550640003: RNCC: 5 | RNVC: 2
600574: RNCC: 5 | RNVC: 2

3 Mar 1989

3040-12-356-3473
Rigid Connecting Link

123563473
027511305: RNCC: 3 | RNVC: 2

18 Feb 2002

3040-12-356-6992
Extension Shaft

123566992
4025756: RNCC: 3 | RNVC: 2
8005.065.20.02/005: RNCC: 5 | RNVC: 2

26 Mar 2002

3040-12-370-9315
Linear Actuating Cylinder Assembly

123709315
4120832: RNCC: 3 | RNVC: 2

17 Jan 2007

3040-13-116-6358
Pawl

131166358
3529121015: RNCC: 3 | RNVC: 2

13 Aug 1997

3040-14-425-1991
Suspension Pivot

144251991
07-00-100: RNCC: 3 | RNVC: 2
07.00.100: RNCC: 5 | RNVC: 2

24 Jun 1988

3040-14-552-2496
Linear Actuating Cylinder Piston

145522496
1216-262-400C: RNCC: 3 | RNVC: 2

6 Dec 2006

3040-14-554-3129
Shouldered Shaft

145543129
5950040.801D: RNCC: 3 | RNVC: 2
5950040.80D-01: RNCC: 5 | RNVC: 2

21 Jun 2007

3040-14-567-4688
Bell Crank

145674688
340-085-302-0: RNCC: 3 | RNVC: 2

17 Mar 2011

3040-15-068-5667
Plate Retaining Sha

150685667
75985F01: RNCC: 3 | RNVC: 2
75985F01: RNCC: 3 | RNVC: 2
75985F01: RNCC: 5 | RNVC: 2
73507F01: RNCC: 5 | RNVC: 9
75985F01: RNCC: 5 | RNVC: 9

24 May 1999

3040-15-068-6916
Depth Bomb

150686916
75389F91: RNCC: 3 | RNVC: 2
75389F91: RNCC: 5 | RNVC: 2

10 Apr 1986

3040-15-068-5664
Shaft Straight

150685664
74885F01: RNCC: 3 | RNVC: 2
74885F01: RNCC: 5 | RNVC: 2

10 Apr 1986

3040-17-113-5623
Rigid Connecting Link

171135623
949986: RNCC: 3 | RNVC: 2
C949986: RNCC: 5 | RNVC: 2

19 Sep 2000

3040-17-115-2909
Rigid Connecting Link

171152909
945514: RNCC: 3 | RNVC: 2
C945514: RNCC: 5 | RNVC: 2

26 Nov 2002

3040-17-113-5628
Mechanically Actuated Spindle

171135628
945114: RNCC: 3 | RNVC: 2
C945114: RNCC: 5 | RNVC: 2

19 Sep 2000

3040-21-878-7118
Pawl

218787118
2401 7000-32: RNCC: 3 | RNVC: 2
10501029: RNCC: 5 | RNVC: 2

21 Feb 1978

3040-21-914-4138
Linear Actuating Cylinder Assembly

219144138
HC5345: RNCC: 3 | RNVC: 2
HC5342: RNCC: 5 | RNVC: 9

20 Nov 1997

3040-22-269-0761
Retaining Collar

222690761
217490409: RNCC: 3 | RNVC: 2
PL 27.115 POS505: RNCC: 5 | RNVC: 2

7 May 1996

3040-99-030-9474
Speci Backing Plate

990309474
P290-06-1647: RNCC: 3 | RNVC: 2
P290-06-1647: RNCC: 5 | RNVC: 2

21 Aug 1996

3040-64-000-4287
Stra Shaft Assembly

3040-20-009-6981
A Cylinder Assembly

3040-14-585-8387
Straight Axle

3040-15-011-0478
Rig Connecting Link

3040-20-010-4263
A Cylinder Assembly

3040-66-161-4978
Actuating Cylinder

3040-01-615-1479
Counterbalance Weight

016151479
7-5R2430113-001: RNCC: 3 | RNVC: 2

2 Jan 2013

3040-01-617-6938
Hub Clamp

016176938
AX0772-24-SP: RNCC: 3 | RNVC: 2
LN0000641: RNCC: C | RNVC: 1

1 Apr 2013

3040-01-619-6993
Shaft Collar

016196993
6432K26: RNCC: 3 | RNVC: 2

13 Jun 2013

3040-01-620-4442
Shaft Collar

016204442
185-5582: RNCC: 3 | RNVC: 2
185-7407: RNCC: 5 | RNVC: 9

24 Jul 2013

3040-01-621-9844
Shaft Collar

016219844
064-52697-000: RNCC: 3 | RNVC: 2
364-51396-000ITEM30: RNCC: 5 | RNVC: 2

24 Sep 2013

3040-01-608-4850
Sheave Shaft

016084850
3491AS0772-1: RNCC: 3 | RNVC: 2
3491AS0772-1: RNCC: 5 | RNVC: 2
3491AS0772-1: RNCC: 5 | RNVC: 2
3491AS0772-1: RNCC: 5 | RNVC: 9

28 Jun 2012

3040-01-610-1474
Hose Reel Brake Wheel Assembly

016101474
391427-DFARS-PP: RNCC: 3 | RNVC: 2
MIL-R-15917-IV-BR-MILGP IT NO 11: RNCC: 5 | RNVC: 2
MIL-R-15917-IV-BR-MILGP: RNCC: D | RNVC: 9

10 Aug 2012

3040-01-611-5497
Shaft Collar

016115497
12282409: RNCC: 3 | RNVC: 2

18 Sep 2012

3040-01-611-9216
Linear Actuating Cylinder Assembly

016119216
MCTI-030-0960-10: RNCC: 3 | RNVC: 9

27 Sep 2012

3040-01-612-3196
Counterbalance Weight

016123196
12522198: RNCC: 3 | RNVC: 2

9 Oct 2012

3040-01-612-4028
Bell Crank

016124028
4026643: RNCC: 3 | RNVC: 2
4026643: RNCC: 5 | RNVC: 9

10 Oct 2012

3040-01-613-0103
Nonaircraft Mechanical Actuator

016130103
340805024P: RNCC: 3 | RNVC: 2
340805024P: RNCC: 3 | RNVC: 9

27 Oct 2012

3040-01-613-1027
Linear Actuating Cylinder Head

016131027
114310-11020: RNCC: 3 | RNVC: 9
114310-11020: RNCC: 5 | RNVC: 2

30 Oct 2012

3040-01-613-1856
Rigid Connecting Link

016131856
269A1335-007: RNCC: 3 | RNVC: 2
269A1335-007: RNCC: 3 | RNVC: 9
269A1335-007: RNCC: 5 | RNVC: 9
269A1335-007: RNCC: 5 | RNVC: 9
269A1335-007: RNCC: 5 | RNVC: 9

1 Nov 2012

3040-01-623-0409
Rigid Connecting Link

016230409
803-6397268 PC 168: RNCC: 3 | RNVC: 2
803-6397269 ASSY M-2: RNCC: 5 | RNVC: 2
803-6397268: RNCC: D | RNVC: 9
803-6397269: RNCC: D | RNVC: 9

30 Oct 2013

3040-01-622-9847
Linear Actuating Cylinder Assembly

016229847
755001058A01: RNCC: 3 | RNVC: 2

28 Oct 2013

3040-01-625-3929
Hex Cartridge

016253929
ST4-014: RNCC: 3 | RNVC: 2

3 Feb 2014

3040-01-627-1860
Spline Adapter

016271860
P18407P1: RNCC: 3 | RNVC: 2

4 Apr 2014

3040-01-629-2067
Straight Shaft

016292067
820201-4: RNCC: 3 | RNVC: 2
820201-4: RNCC: 3 | RNVC: 9

23 Jun 2014

3040-01-630-6315
Rigid Connecting Link

016306315
25078-#2ZC: RNCC: 3 | RNVC: 2
4292315: RNCC: 5 | RNVC: 2
4292315: RNCC: 5 | RNVC: 2

12 Aug 2014

3040-01-631-3293
Nonaircraft Mechanical Actuator

016313293
IC34.08.05.011H: RNCC: 3 | RNVC: 2
IC34.08.05.011H: RNCC: 3 | RNVC: 9
H5BH16104631307K: RNCC: 5 | RNVC: 9

10 Sep 2014

3040-01-641-5633
Mechanical Drive Housing

016415633
814155-1: RNCC: 3 | RNVC: 2

26 Jan 2015

3040-01-641-5923
Rigid Connecting Link

016415923
D-WK-879-67-25: RNCC: 3 | RNVC: 2
D-WK-879-67 REV G PC# 25: RNCC: 5 | RNVC: 2
D-WK-879-67: RNCC: D | RNVC: 9

27 Jan 2015

3040-01-643-4917
Control Cam

016434917
845-7285216-56: RNCC: 3 | RNVC: 2
2643-751-01-56: RNCC: 5 | RNVC: 2

3 Apr 2015

3040-01-643-9773
Housing Adapter

016439773
4300301: RNCC: 3 | RNVC: 2
3695172: RNCC: 5 | RNVC: 9

17 Apr 2015

3040-01-645-6058
Control Cam

016456058
C5M29821: RNCC: 3 | RNVC: 2

23 Jun 2015

3040-01-646-9662
Shouldered Shaft

016469662
LPE-14K-EC124-01: RNCC: 3 | RNVC: 2
F160217: RNCC: 5 | RNVC: 2
F160216 ITEM 4: RNCC: 5 | RNVC: 9

6 Aug 2015

3040-01-647-1796
Linear Actuating Cylinder Head

016471796
EP-0021215: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-645-4638
Friction Lining

016454638
2311105-1: RNCC: 3 | RNVC: 2

17 Jun 2015

3040-01-647-7189
Mechanical Drive Housing Part

016477189
7-4625-6: RNCC: 3 | RNVC: 2
7-4625-5: RNCC: 5 | RNVC: 9

31 Aug 2015

3040-01-648-1118
Hydraulic Accumulator Cylinder

016481118
GG775794A0: RNCC: 3 | RNVC: 2
1H000000107: RNCC: 5 | RNVC: 2
GG775794A0 REV B: RNCC: 5 | RNVC: 2

15 Sep 2015

3040-01-647-0564
Hydraulic Accumulator Cylinder

016470564
CD23073501: RNCC: 3 | RNVC: 2
12542702: RNCC: 7 | RNVC: 2
BH-0895: RNCC: E | RNVC: 8
12505535: RNCC: E | RNVC: 8

10 Aug 2015

3040-01-649-3160
Linear Actuating Cylinder Assembly

016493160
3969538: RNCC: 3 | RNVC: 2
M16699: RNCC: 5 | RNVC: 2
3969538: RNCC: 5 | RNVC: 2
3969538: RNCC: 5 | RNVC: 9

26 Oct 2015

3040-01-649-6283
Shouldered Shaft Assembly

016496283
12580272: RNCC: 3 | RNVC: 2

5 Nov 2015

3040-01-648-5847
Linear Actuating Cylinder

016485847
HF610020320: RNCC: 3 | RNVC: 9
HF610020320: RNCC: 5 | RNVC: 2
HF610020320: RNCC: 5 | RNVC: 9

29 Sep 2015

3040-01-652-6693
Shouldered Shaft

016526693
3905081C91: RNCC: 3 | RNVC: 2

1 Mar 2016

3040-01-653-0717
Rigid Connecting Link

016530717
116A7391-9: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-3278
Hydraulic Control Receiver-Transmitter

016533278
1122493: RNCC: 3 | RNVC: 1
S270T245-3: RNCC: 7 | RNVC: 2

19 Mar 2016

3040-01-654-2567
Ball Joint

016542567
6058K73: RNCC: 3 | RNVC: 2
12595521: RNCC: D | RNVC: 9

22 Apr 2016

3040-01-654-2761
Spur Gearshaft

016542761
518-5940648 ITEM 174: RNCC: 3 | RNVC: 2
20410-414 ITEM 174: RNCC: 5 | RNVC: 2

22 Apr 2016

3040-01-654-6398
Linear Actuating Cylinder Piston Rod

016546398
EP-0021717: RNCC: 3 | RNVC: 2

4 May 2016

3040-01-656-0367
Control Cam

016560367
3972AS330-1: RNCC: 3 | RNVC: 2

15 Jun 2016

3040-01-656-2680
Control Cam

016562680
5006475: RNCC: 3 | RNVC: 2

23 Jun 2016

3040-01-654-7622
Grease Cap

016547622
6396: RNCC: 3 | RNVC: 2

9 May 2016

3040-01-656-3295
Shouldered Shaft

016563295
ZF4646308013: RNCC: 3 | RNVC: 2
4646.308.013: RNCC: 5 | RNVC: 9
4646.308.013: RNCC: D | RNVC: 9

27 Jun 2016

3040-01-656-5313
Spur Gearshaft

016565313
4646.305.053: RNCC: 3 | RNVC: 2

7 Jul 2016

3040-01-656-6060
Linear Actuating Cylinder Piston

016566060
EP-0019827: RNCC: 3 | RNVC: 2
KALM014015600P1: RNCC: 5 | RNVC: 9

11 Jul 2016

3040-01-657-2057
Rigid Connecting Link

016572057
75A753155-9ADA: RNCC: 3 | RNVC: 2
75A753155-9ADA: RNCC: 5 | RNVC: 2

3 Aug 2016

3040-01-657-8813
Linear Actuating Cylinder Assembly

016578813
A2D-20-B: RNCC: 3 | RNVC: 2
A2D-20-B: RNCC: 3 | RNVC: 2
4253902: RNCC: 7 | RNVC: 2

1 Sep 2016

3040-01-658-0551
Linear Actuating Cylinder Assembly

016580551
M17420: RNCC: 3 | RNVC: 2
4100553: RNCC: 7 | RNVC: 2

12 Sep 2016

3040-01-660-3831
Breather

016603831
39131: RNCC: 3 | RNVC: 2
02080980: RNCC: 3 | RNVC: 9
39131: RNCC: 5 | RNVC: 2

19 Jan 2017

3040-01-661-9240
Hydraulic Accumulator

016619240
MB22423: RNCC: 3 | RNVC: 2

21 Mar 2017

3040-01-662-5923
Housing Adapter

016625923
231136: RNCC: 3 | RNVC: 2
231136: RNCC: 5 | RNVC: 2

12 Apr 2017

3040-01-663-5060
Lever Coil

016635060
S2X-6123H: RNCC: 3 | RNVC: 2

11 May 2017

3040-01-667-4286
Rigid Connecting Link

016674286
5147T51G01: RNCC: 3 | RNVC: 2

17 Oct 2017

3040-01-667-6874
Straight Shaft

016676874
14001338: RNCC: 3 | RNVC: 2

26 Oct 2017

3040-01-668-4047
Manual Control Lever

016684047
5904-21: RNCC: 3 | RNVC: 2

21 Nov 2017

3040-01-668-6895
Control Cam

016686895
7662489: RNCC: 3 | RNVC: 2
03053029: RNCC: 5 | RNVC: 2
7662489: RNCC: 5 | RNVC: 2
SW325-AC-1PB-010 FIG/INDEX 36-32: RNCC: C | RNVC: 1

4 Dec 2017

3040-01-668-8728
Housing Adapter

016688728
248-8592622 FN 201: RNCC: 3 | RNVC: 2
SNW 3026X4.1/2: RNCC: 3 | RNVC: 2
Z-7045 FN 12: RNCC: 3 | RNVC: 2
248-8592622: RNCC: D | RNVC: 9

11 Dec 2017

3040-01-669-2614
Extension Shaft

016692614
4999-9068: RNCC: 3 | RNVC: 2
4999-9068: RNCC: 3 | RNVC: 2

3 Jan 2018

3040-01-669-5128
Counterbalance Weight

016695128
393514CL7: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-669-5156
Counterbalance Weight

016695156
393514CL6: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-670-4769
Brake Disc

016704769
98006A0625M1: RNCC: 3 | RNVC: 2

23 Feb 2018

3040-01-670-3587
Straight Shaft

016703587
87011A0623M1: RNCC: 3 | RNVC: 2

20 Feb 2018

3040-01-672-3035
Linear Actuating Cylinder Piston Rod

016723035
P528135: RNCC: 3 | RNVC: 2
DU500041389 ITEM 19: RNCC: D | RNVC: 9

26 Apr 2018

3040-01-676-1230
Ball Joint

016761230
SPAL4008921: RNCC: 3 | RNVC: 2

12 Oct 2018

3040-01-671-5289
Counterbalance Weight

016715289
530-000090-000: RNCC: 3 | RNVC: 2
530-000090-000: RNCC: 5 | RNVC: 2

2 Apr 2018

3040-01-680-9496
Straight Shaft

016809496
700069C00: RNCC: 3 | RNVC: 2

29 May 2019

3040-01-681-4176
Straight Shaft

016814176
6525743: RNCC: 3 | RNVC: 2
6525713: RNCC: D | RNVC: 9

17 Jun 2019

3040-01-684-3778
Rigid Connecting Link

016843778
201334721: RNCC: 3 | RNVC: 2

31 Oct 2019

3040-01-692-8981
Multiple Gears Gearshaft

016928981
8592279-102: RNCC: 3 | RNVC: 2
311-8592279: RNCC: D | RNVC: 9

15 Jan 2021

3040-01-693-8198
Rigid Connecting Link

016938198
69B90018-1: RNCC: 3 | RNVC: 1

6 Mar 2021

3040-12-197-9270
Linear Actuating Cylinder Assembly

121979270
0482006-008: RNCC: 3 | RNVC: 2
02500131: RNCC: 5 | RNVC: 2
2500131KZ5062-55: RNCC: 5 | RNVC: 9

1 Dec 1983

3040-12-356-3466
Remote Control Lever

123563466
027000601: RNCC: 3 | RNVC: 2

18 Feb 2002

3040-12-356-9268
Push-Pull Control Assembly

123569268
6027522: RNCC: 3 | RNVC: 2
6015.127.70.05.000: RNCC: 5 | RNVC: 2

17 Apr 2002

3040-12-359-3280
Rigid Connecting Link

123593280
867008902: RNCC: 3 | RNVC: 2

24 Jan 2003

3040-12-370-8484
Pawl

123708484
867011918: RNCC: 3 | RNVC: 2

10 Jan 2007

3040-12-389-7488
Linear Actuating Cylinder Assembly Parts Kit

123897488
XP56910100099: RNCC: 3 | RNVC: 2

21 Aug 2012

3040-12-375-2979
Piston Ring

123752979
8600-016-14-141000: RNCC: 3 | RNVC: 2

16 May 2008

3040-14-479-0264
Hub Clamp

144790264
96184735: RNCC: 3 | RNVC: 2
96184735: RNCC: 5 | RNVC: 9

6 Dec 1995

3040-14-321-7157
Vis Pointage Direct

143217157
74034: RNCC: 3 | RNVC: 2

1 Jan 1975

3040-14-553-6143
Straight Shaft

145536143
4353516: RNCC: 3 | RNVC: 2

24 Apr 2007

3040-15-068-5670
Shaft Shouldered

150685670
70960F01: RNCC: 3 | RNVC: 2
70960F01: RNCC: 5 | RNVC: 2
73346F01: RNCC: 5 | RNVC: 9

18 May 1999

3040-15-186-7637
Straight Shaft

151867637
1717.200.042: RNCC: 3 | RNVC: 2
4717.500.000 POS.3: RNCC: 3 | RNVC: 2

5 Jan 2009

3040-15-117-9562
Bell Crank

151179562
75021F01: RNCC: 3 | RNVC: 2
75021F01: RNCC: 5 | RNVC: 2
74789F01: RNCC: 5 | RNVC: 2
74789F01: RNCC: 5 | RNVC: 9
75021: RNCC: 5 | RNVC: 9
75021F01: RNCC: 5 | RNVC: 9

20 Oct 1994

3040-17-120-2819
Rigid Connecting Link

171202819
9452572: RNCC: 3 | RNVC: 2
C9452572: RNCC: 5 | RNVC: 2

22 Mar 2007

3040-20-001-7491
Gearbox Parts Kit

200017491
KIT42897-B: RNCC: 3 | RNVC: 2

4 Dec 2004

3040-20-000-4223
Linear Actuating Cylinder Assembly

200004223
22157C: RNCC: 3 | RNVC: 2

25 Sep 2002

3040-20-005-7398
Straight Shaft Assembly

200057398
C230: RNCC: 3 | RNVC: 2

21 Jul 2010

3040-21-907-6341
Pawl

219076341
8917076-1: RNCC: 3 | RNVC: 2
12556984: RNCC: 5 | RNVC: 2

6 Mar 1990

3040-21-914-8764
Linear Actuating Cylinder Assembly

219148764
7080-BZ16: RNCC: 3 | RNVC: 2

17 Nov 1998

3040-21-914-4341
Linear Actuating Cylinder Head

219144341
HS5157: RNCC: 3 | RNVC: 2

2 Apr 1998

3040-25-160-3114
Piston Ring

251603114
SEI-75: RNCC: 3 | RNVC: 2
SEI-75: RNCC: 5 | RNVC: 2
612-34 ITEM 9: RNCC: D | RNVC: 9

1 Oct 2009

3040-20-010-4262
A Cylinder Assembly

3040-41-003-0956
Shouldered Shaft

3040-01-615-0655
Counterbalance Weight

016150655
7-5R2430112-005: RNCC: 3 | RNVC: 2

26 Dec 2012

3040-01-615-3589
Shouldered Axle

016153589
MTM-10117: RNCC: 3 | RNVC: 2
12522561: RNCC: D | RNVC: 9

10 Jan 2013

3040-01-617-6137
Shouldered Shaft

016176137
1362621: RNCC: 3 | RNVC: 2
1362621: RNCC: 5 | RNVC: 2

28 Mar 2013

3040-01-618-8757
Segmented Rotor Brake

016188757
RTR-10-SS: RNCC: 3 | RNVC: 9
ROTOR-10-SS: RNCC: 5 | RNVC: 9

9 May 2013

3040-01-619-6464
Shouldered Shaft

016196464
43042-00304-2: RNCC: 3 | RNVC: 2

11 Jun 2013

3040-01-619-7873
Straight Shaft

016197873
185-5703: RNCC: 3 | RNVC: 2

18 Jun 2013

3040-01-619-7706
Worm Wheel Gearshaft

016197706
43042-00306-2: RNCC: 3 | RNVC: 2

17 Jun 2013

3040-01-611-4202
Straight Shaft

016114202
12279022: RNCC: 3 | RNVC: 2

13 Sep 2012

3040-01-612-5949
Control Cam

016125949
4026670: RNCC: 3 | RNVC: 2
4026670: RNCC: 5 | RNVC: 9

16 Oct 2012

3040-01-623-3805
Linear Actuating Cylinder Assembly

016233805
JNA050: RNCC: 3 | RNVC: 2
JNA050 ITEM NO. 6: RNCC: 5 | RNVC: 2
JNA055: RNCC: D | RNVC: 9

12 Nov 2013

3040-01-623-1858
Linear Actuating Cylinder Assembly

016231858
FS0100.NU40CWALT.NL19SKA.00XX: RNCC: 3 | RNVC: 2
ES0100.U1A04.19K0: RNCC: 5 | RNVC: 9
DOC.41.EDN REV E: RNCC: 5 | RNVC: 9

4 Nov 2013

3040-01-624-0165
Counterbalance Weight

016240165
9319M30P10: RNCC: 3 | RNVC: 2

11 Dec 2013

3040-01-625-2243
Shaft Collar

016252243
12528487: RNCC: 3 | RNVC: 2
12528487: RNCC: 5 | RNVC: 2
12528487: RNCC: D | RNVC: 9

29 Jan 2014

3040-01-626-9502
Transmission Sleeve

016269502
8475528: RNCC: 3 | RNVC: 2

26 Mar 2014

3040-01-628-1340
Shouldered Shaft

016281340
6759SL: RNCC: 3 | RNVC: 2
19KP786: RNCC: 5 | RNVC: 2

9 May 2014

3040-01-628-2402
Mechanically Actuated Spindle

016282402
167-8200543 ITEM NO 28: RNCC: 3 | RNVC: 2
167-8278258: RNCC: 5 | RNVC: 1

15 May 2014

3040-01-632-5449
Piston Ring

016325449
N72184: RNCC: 3 | RNVC: 2
38981N-2-C-C-17: RNCC: 5 | RNVC: 2

23 Oct 2014

3040-01-641-7490
Guide Shoe

016417490
MIL-001-1047: RNCC: 3 | RNVC: 2

31 Jan 2015

3040-01-642-7970
Rigid Connecting Link

016427970
5362-243: RNCC: 3 | RNVC: 2

10 Mar 2015

3040-01-642-9264
Shouldered Shaft

016429264
7377567: RNCC: 3 | RNVC: 2
7225837 ITEM 1: RNCC: C | RNVC: 1

13 Mar 2015

3040-01-644-2137
Piston Ring

016442137
104716-1: RNCC: 3 | RNVC: 2
500040 ITEM NO. 7 P/N 104716-1: RNCC: C | RNVC: 1
500040: RNCC: D | RNVC: 9

27 Apr 2015

3040-01-645-7672
Shouldered Shaft

016457672
13045799: RNCC: 3 | RNVC: 2

26 Jun 2015

3040-01-647-3408
Rigid Connecting Link

016473408
7-1403-8: RNCC: 3 | RNVC: 2
7-1403-7: RNCC: 3 | RNVC: 9

18 Aug 2015

3040-01-648-6031
Mechanical Drive Housing Part

016486031
X00E50210046: RNCC: 3 | RNVC: 2
X00E50202753/S0003: RNCC: 3 | RNVC: 9
X00E50202753/S0003: RNCC: 5 | RNVC: 2
X00E50202753/S0003: RNCC: 5 | RNVC: 9

29 Sep 2015

3040-01-648-8104
Rigid Connecting Link

016488104
2AYG12019: RNCC: 3 | RNVC: 2
2AYG12019: RNCC: 5 | RNVC: 9

7 Oct 2015

3040-01-649-5924
Rigid Connecting Link

016495924
12580280-4: RNCC: 3 | RNVC: 2
12580280: RNCC: D | RNVC: 9

4 Nov 2015

3040-01-650-4298
Bell Crank

016504298
2039M51P02: RNCC: 3 | RNVC: 2

2 Dec 2015

3040-01-650-6910
Manual Control Lever

016506910
T00376-5083: RNCC: 3 | RNVC: 2
T00376-5083: RNCC: 3 | RNVC: 9

15 Dec 2015

3040-01-651-0014
Flexible Drive Shaft

016510014
89162-401-2: RNCC: 3 | RNVC: 2

28 Dec 2015

3040-01-651-6020
Piston Ring

016516020
266-22200-161-6060: RNCC: 3 | RNVC: 2
2211141-600-222: RNCC: D | RNVC: 9

22 Jan 2016

3040-01-653-1066
Pneumatic Actuator Cylinder Housing

016531066
EP-0021731: RNCC: 3 | RNVC: 2
EP-002719: RNCC: D | RNVC: 9

11 Mar 2016

3040-01-653-8671
Shouldered Shaft Assembly

016538671
29542538: RNCC: 3 | RNVC: 2

8 Apr 2016

3040-01-657-6830
Bell Crank

016576830
8226406: RNCC: 3 | RNVC: 2

25 Aug 2016

3040-01-661-4459
Straight Shaft Assembly

016614459
256T5710-121: RNCC: 3 | RNVC: 1

3 Mar 2017

3040-01-662-3122
Shouldered Shaft

016623122
6640207-1: RNCC: 3 | RNVC: 2

3 Apr 2017

3040-01-663-5715
Straight Shaft

016635715
3234AS540-03: RNCC: 3 | RNVC: 2
3234AS540-03: RNCC: 5 | RNVC: 2

15 May 2017

3040-01-664-6067
Linear Actuating Cylinder Assembly

016646067
8M0155794: RNCC: 3 | RNVC: 2
8M0098629: RNCC: 5 | RNVC: 9

27 Jun 2017

3040-01-653-5600
Body Hub

016535600
3612642: RNCC: 1 | RNVC: 2
29510823: RNCC: 3 | RNVC: 2

29 Mar 2016

3040-01-654-4201
Straight Shaft Assembly

016544201
256T5710-501: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-654-5558
Straight Shaft Assembly

016545558
256T5710-107: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-655-3963
Shouldered Shaft

016553963
802011341386-1: RNCC: 3 | RNVC: 2

25 May 2016

3040-01-655-9393
Shouldered Shaft

016559393
4646.302.106: RNCC: 3 | RNVC: 2

13 Jun 2016

3040-01-656-3721
Rigid Connecting Link

016563721
14002359: RNCC: 3 | RNVC: 9
14002359: RNCC: C | RNVC: 1

28 Jun 2016

3040-01-656-3870
Rigid Connecting Link

016563870
49150: RNCC: 3 | RNVC: 2

29 Jun 2016

3040-01-656-9796
Linear Actuating Cylinder Piston Rod

016569796
EP-0021836: RNCC: 3 | RNVC: 2

26 Jul 2016

3040-01-668-2519
Breather

016682519
HC-120-T-24P-E: RNCC: 3 | RNVC: 2

15 Nov 2017

3040-01-669-5177
Counterbalance Weight

016695177
393514CL5: RNCC: 3 | RNVC: 2

10 Jan 2018

3040-01-670-3686
Disc Brake Caliper Assembly

016703686
98006A0624M1: RNCC: 3 | RNVC: 2

20 Feb 2018

3040-01-671-1644
Hydraulic Control Assembly

016711644
80550: RNCC: 3 | RNVC: 2
80550: RNCC: 3 | RNVC: 9
6183342: RNCC: 7 | RNVC: 2

16 Mar 2018

3040-01-670-6983
Shouldered Shaft Assembly

016706983
50185-1: RNCC: 3 | RNVC: 2
P51110-1 ITEM 6: RNCC: C | RNVC: 1
P51110-1: RNCC: D | RNVC: 9

1 Mar 2018

3040-01-682-5229
Rigid Connecting Link

016825229
748598K01: RNCC: 3 | RNVC: 2

12 Aug 2019

3040-01-684-1757
Rigid Connecting Link

016841757
108756-3: RNCC: 3 | RNVC: 2

24 Oct 2019

3040-01-608-7626
Nonaircraft Mechanical Actuator

016087626
593-7067140-A7: RNCC: 3 | RNVC: 2
H577-3303-A7: RNCC: 5 | RNVC: 2

11 Jul 2012

3040-01-609-6574
Hydraulic Accumulator

016096574
2ASF12005: RNCC: 3 | RNVC: 2
2ASF12005: RNCC: 3 | RNVC: 9

31 Jul 2012

3040-01-610-1292
Straight Shaft Assembly

016101292
70700-20421-044: RNCC: 3 | RNVC: 2
70700-20421: RNCC: D | RNVC: 9

10 Aug 2012

3040-01-619-6378
Rigid Connecting Link

016196378
209-062-758-137: RNCC: 3 | RNVC: 2
450-060-031: RNCC: D | RNVC: 9

11 Jun 2013

3040-01-622-5211
Straight Shaft

016225211
13480702: RNCC: 3 | RNVC: 2

10 Oct 2013

3040-12-406-0050
Straight Shaft

3040-12-406-0084
Mechanical Housing

3040-01-682-2257
Rotating Shaft Eye Bracket

016822257
8381613: RNCC: 3 | RNVC: 2
8381613: RNCC: 5 | RNVC: 2

29 Jul 2019

3040-01-671-8721
Linear Actuating Cylinder

016718721
334/D1131: RNCC: 3 | RNVC: 2

13 Apr 2018

3040-01-673-8725
Shouldered Shaft

016738725
A36912: RNCC: 3 | RNVC: 2

2 Jul 2018

3040-01-685-1991
Mechanical Drive Housing

016851991
803-8463827-60: RNCC: 3 | RNVC: 2
803-8463827: RNCC: D | RNVC: 9

5 Dec 2019

3040-01-692-0282
Linear Actuating Cylinder Cap

016920282
PA12653437: RNCC: 3 | RNVC: 2

16 Nov 2020

3040-01-694-4824
Linear Actuating Cylinder Assembly Parts Kit

016944824
LCS1720STR-001: RNCC: 3 | RNVC: 2

5 Apr 2021

3040-01-694-6583
Counterbalance Weight

016946583
08FM91060: RNCC: 3 | RNVC: 2
1090956: RNCC: 7 | RNVC: 2

15 Apr 2021

3040-01-694-9285
Shouldered Shaft

016949285
4026AS635-1: RNCC: 3 | RNVC: 2
4026AS635-1: RNCC: 5 | RNVC: 2
4026A635: RNCC: D | RNVC: 9

5 May 2021

3040-01-695-1754
Shouldered Shaft

016951754
980-4227-9EN: RNCC: 3 | RNVC: 2

19 May 2021

3040-12-181-8564
Shouldered Shaft

121818564
5500500831: RNCC: 3 | RNVC: 2
5500500431: RNCC: 5 | RNVC: 9

21 Dec 1979

3040-12-346-2191
Remote Control Lever

123462191
0414 8952: RNCC: 3 | RNVC: 2

30 Jun 1998

3040-01-693-3374
Linear Actuating Cylinder

016933374
E11.43404-0023: RNCC: 3 | RNVC: 2

5 Feb 2021

3040-12-370-8753
Rotating Shaft Eye Bracket

123708753
866411905: RNCC: 3 | RNVC: 2

11 Jan 2007

3040-12-372-9451
Straight Shaft

123729451
909668303: RNCC: 3 | RNVC: 2

10 Sep 2007

3040-12-377-8330
Mechanical Drive Housing

123778330
0429 0718: RNCC: 3 | RNVC: 2
04290718: RNCC: 5 | RNVC: 2

13 Feb 2009

3040-13-120-5377
Straight Axle

131205377
3633441420: RNCC: 3 | RNVC: 2

16 Feb 2009

3040-14-554-3172
Rotary Actuating Cylinder Assembly

145543172
5950040.80D: RNCC: 3 | RNVC: 2
5950040.80D REV.A: RNCC: 5 | RNVC: 2

21 Jun 2007

3040-15-056-0280
Remote Control Lever

150560280
1276-02-121: RNCC: 3 | RNVC: 2
5518822: RNCC: 5 | RNVC: 2
1276-02-121-99: RNCC: 5 | RNVC: 2
127602121: RNCC: 5 | RNVC: 2

31 Dec 1975

3040-17-113-5624
Rigid Connecting Link

171135624
949976: RNCC: 3 | RNVC: 2
C949976: RNCC: 5 | RNVC: 2

19 Sep 2000

3040-20-006-7893
Straight Shaft

200067893
D-005-2/P38: RNCC: 3 | RNVC: 2
10-314-2: RNCC: D | RNVC: 9

14 Mar 2012

3040-21-907-6671
Shouldered Shaft

219076671
10501172: RNCC: 3 | RNVC: 2
DIN V80 95 X 22 CRNI 17: RNCC: 3 | RNVC: 2
24017400-04: RNCC: 3 | RNVC: 2

14 Sep 1990

3040-21-914-4049
Remote Control Lever

219144049
10608083: RNCC: 3 | RNVC: 2

6 Sep 1997

3040-21-920-2792
Linear Actuating Cylinder Assembly Parts Kit

20 Aug 1999

3040-21-920-0415
Linear Actuating Cylinder Assembly

219200415
7050-B10: RNCC: 3 | RNVC: 2

20 Mar 1999

3040-01-615-2341
Rigid Connecting Link

016152341
P42170-2: RNCC: 3 | RNVC: 2

5 Jan 2013

3040-01-616-1702
Shouldered Shaft

016161702
888574: RNCC: 3 | RNVC: 2

4 Feb 2013

3040-01-617-2835
Shouldered Shaft

016172835
2208970-1: RNCC: 3 | RNVC: 2

19 Mar 2013

3040-01-617-3961
Shouldered Shaft

016173961
1304982: RNCC: 3 | RNVC: 2
1304982: RNCC: 5 | RNVC: 2

21 Mar 2013

3040-01-617-6346
Remote Control Lever

016176346
2ABR12019: RNCC: 3 | RNVC: 2
2ABR12019: RNCC: 3 | RNVC: 9

28 Mar 2013

3040-01-620-5085
Remote Control Lever

016205085
MS2M9159: RNCC: 3 | RNVC: 2
E06528: RNCC: 7 | RNVC: 2

26 Jul 2013

3040-01-622-4906
Friction Lining

016224906
2307496-2: RNCC: 3 | RNVC: 2

9 Oct 2013

3040-01-609-8105
Gag Rod

016098105
157228: RNCC: 3 | RNVC: 2

3 Aug 2012

3040-01-609-0630
Poppet Valve

016090630
201971-001: RNCC: 3 | RNVC: 2
3922577: RNCC: 5 | RNVC: 2
3922577: RNCC: 5 | RNVC: 9

13 Jul 2012

3040-01-610-0727
Grease Cap

016100727
1978827: RNCC: 3 | RNVC: 2

9 Aug 2012

3040-01-611-3510
Shaft And Tube Support Assembly

016113510
MBCS4458: RNCC: 3 | RNVC: 2
MBCS4458: RNCC: 5 | RNVC: 9

12 Sep 2012

3040-01-611-5892
Rigid Connecting Link

016115892
200520718: RNCC: 3 | RNVC: 2
200520718: RNCC: 3 | RNVC: 2

19 Sep 2012

3040-01-613-2017
Rigid Connecting Link

016132017
7664337-2/KRF 4202: RNCC: 1 | RNVC: 2
KRF 4202: RNCC: 3 | RNVC: 2

1 Nov 2012

3040-01-614-1280
Manual Control Lever

016141280
FNW220AG: RNCC: 3 | RNVC: 2
FNW220AG: RNCC: 5 | RNVC: 2

27 Nov 2012

3040-01-614-0756
Multiple Gears Gearshaft

016140756
517698-1: RNCC: 3 | RNVC: 2

26 Nov 2012

3040-01-621-5916
Piston Rod Ring

016215916
062229: RNCC: 3 | RNVC: 2

12 Sep 2013

3040-01-624-8840
Shouldered Shaft

016248840
4812-174: RNCC: 3 | RNVC: 2

17 Jan 2014

3040-01-624-6374
Rigid Connecting Link

016246374
123CM90602-9: RNCC: 3 | RNVC: 2
123CM90602-9: RNCC: 3 | RNVC: 2
123CM90602-9: RNCC: 5 | RNVC: 9

10 Jan 2014

3040-01-629-0172
Manual Control Lever Assembly

016290172
13013821: RNCC: 3 | RNVC: 2
13013821: RNCC: 5 | RNVC: 2
6049958: RNCC: 5 | RNVC: 9

17 Jun 2014

3040-01-630-0306
Bell Crank

016300306
12560901: RNCC: 3 | RNVC: 2
12560901: RNCC: 5 | RNVC: 2

23 Jul 2014

3040-01-630-0941
Brake Shoe

016300941
6473-31-004-A: RNCC: 3 | RNVC: 2
6473-31-004-A: RNCC: 5 | RNVC: 2
6473-31-004-A: RNCC: 5 | RNVC: 9

24 Jul 2014

3040-01-633-2644
Spur Gearshaft

016332644
12275793: RNCC: 3 | RNVC: 2

17 Nov 2014

3040-01-640-9871
Shaft Collar

016409871
803-6397269 ITEM 92: RNCC: 3 | RNVC: 2
167-8278492 ITEM 15: RNCC: 5 | RNVC: 2

6 Jan 2015

3040-01-640-7919
Ball Joint

016407919
6058K72: RNCC: 3 | RNVC: 2

22 Dec 2014

3040-01-642-6760
Spur Gearshaft

016426760
803615T+2: RNCC: 3 | RNVC: 2

4 Mar 2015

3040-01-642-8769
Rigid Connecting Link

016428769
877853A04: RNCC: 3 | RNVC: 2

12 Mar 2015

3040-01-643-1791
Straight Shaft

016431791
845-7526489-XX-12-X-X-X-X-008: RNCC: 3 | RNVC: 2
845-7526489-2C-12-B-3-N-G-008: RNCC: 5 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

23 Mar 2015

3040-01-647-1778
Hydraulic Accumulator Cylinder

016471778
EP-0021210: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-647-1418
Mechanical Drive Housing

016471418
3676650: RNCC: 3 | RNVC: 2

12 Aug 2015

3040-01-647-2586
Linear Actuating Cylinder Head

016472586
EP-0021226: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-648-0620
Jointed Link

016480620
13055051-1: RNCC: 3 | RNVC: 2
13055051-2: RNCC: 3 | RNVC: 2
5CV0211379-1: RNCC: 5 | RNVC: 9
13055051-1: RNCC: 7 | RNVC: 2

12 Sep 2015

3040-01-649-3393
Shouldered Axle

016493393
29262: RNCC: 3 | RNVC: 2
29262ZY: RNCC: 5 | RNVC: 2

27 Oct 2015

3040-01-650-5009
Special Shaft

016505009
472P431C003-7: RNCC: 3 | RNVC: 2
472P431C003-7: RNCC: 5 | RNVC: 9
472P431C003-7: RNCC: C | RNVC: 1

7 Dec 2015

3040-01-651-0214
Worm Shaft

016510214
820-5348808: RNCC: 3 | RNVC: 2
845-7526227-083: RNCC: C | RNVC: 1

29 Dec 2015

3040-01-651-2200
Housing Adapter

016512200
119027: RNCC: 3 | RNVC: 2

11 Jan 2016

3040-01-652-4975
Worm Shaft

016524975
60-405-0335-2: RNCC: 3 | RNVC: 2
01-435-0436-4ITEM206: RNCC: D | RNVC: 9

24 Feb 2016

3040-01-653-0773
Rigid Connecting Link

016530773
148A6352-9: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-2543
Linear Actuating Cylinder Head

016532543
CC-0011415: RNCC: 3 | RNVC: 2

16 Mar 2016

3040-01-653-2271
Gear And Pinion

016532271
C927-0100D: RNCC: 3 | RNVC: 9

15 Mar 2016

3040-01-653-3194
Pneumatic Actuator Cylinder Housing

016533194
EP-0021947: RNCC: 3 | RNVC: 2

18 Mar 2016

3040-01-654-4686
Straight Shaft Assembly

016544686
256T5710-101: RNCC: 3 | RNVC: 1

28 Apr 2016

3040-01-654-4690
Straight Shaft Assembly

016544690
256T5710-401: RNCC: 3 | RNVC: 1

28 Apr 2016

3040-01-654-4657
Straight Shaft Assembly

016544657
256T5710-139: RNCC: 3 | RNVC: 1

28 Apr 2016

3040-01-655-5250
Special Pawl

016555250
69B81068-2: RNCC: 3 | RNVC: 1

31 May 2016

3040-01-654-7117
Shouldered Shaft

016547117
218030355: RNCC: 3 | RNVC: 2
H462-0430-37: RNCC: 3 | RNVC: 2
151-8617523-37: RNCC: 5 | RNVC: 2
151-8617523: RNCC: D | RNVC: 9

6 May 2016

3040-01-656-3008
Steering Actuator

016563008
HH5271-3: RNCC: 3 | RNVC: 2

24 Jun 2016

3040-01-654-8559
Shouldered Shaft

016548559
14002343: RNCC: 3 | RNVC: 1
14002343: RNCC: 5 | RNVC: 9

11 May 2016

3040-01-655-1405
Spur Gearshaft

016551405
41656T: RNCC: 3 | RNVC: 2

19 May 2016

3040-01-657-7205
Linear Actuating Cylinder Piston Rod

016577205
PMU29E-AT-3-7: RNCC: 3 | RNVC: 2
PMU29E-AT-3-7: RNCC: 5 | RNVC: 9

26 Aug 2016

3040-01-658-0098
Ball Joint

016580098
748453: RNCC: 3 | RNVC: 2
748453: RNCC: 3 | RNVC: 9

9 Sep 2016

3040-01-658-9216
Hydraulic Accumulator

016589216
ACD50B-32P-NT-4: RNCC: 3 | RNVC: 2

25 Oct 2016

3040-01-661-7626
Rigid Connecting Link

016617626
251T0100-142: RNCC: 3 | RNVC: 1

14 Mar 2017

3040-01-662-3727
Rigid Connecting Link

016623727
4973958-2: RNCC: 3 | RNVC: 2

5 Apr 2017

3040-01-665-1952
Counterbalance Weight

016651952
3890AS004390-01: RNCC: 3 | RNVC: 2
3890AS004390-01: RNCC: D | RNVC: 9

24 Jul 2017

3040-01-665-6968
Manual Control Lever Assembly

016656968
201219021-10: RNCC: 3 | RNVC: 2

9 Aug 2017

3040-01-668-5841
Rotating Shaft Eye Bracket

016685841
7662494: RNCC: 3 | RNVC: 2
7662494: RNCC: 5 | RNVC: 2
05174753: RNCC: 5 | RNVC: 9
SW325-AC-IBP-010 FIG/INDEX 36-91: RNCC: C | RNVC: 1

29 Nov 2017

3040-01-668-9338
Spur Gearshaft

016689338
BB-8006136-01: RNCC: 3 | RNVC: 2

13 Dec 2017

3040-01-668-9961
Straight Shaft

016689961
14009A0237: RNCC: 3 | RNVC: 2
14009A0237: RNCC: 5 | RNVC: 2

15 Dec 2017

3040-01-669-3738
Rigid Connecting Link

016693738
3-55508-3: RNCC: 3 | RNVC: 2

8 Jan 2018

3040-01-670-1299
Control Cable Assembly

016701299
MEA-25000-5505: RNCC: 3 | RNVC: 2

7 Feb 2018

3040-01-671-3142
Rigid Connecting Link

016713142
10062623: RNCC: 3 | RNVC: 2

22 Mar 2018

3040-01-672-9045
Dual Disk Brake

016729045
C-934-0050: RNCC: 3 | RNVC: 9
C50893PC10: RNCC: 5 | RNVC: 9
C50893: RNCC: D | RNVC: 9

22 May 2018

3040-01-672-3183
Rigid Connecting Link

016723183
12602650: RNCC: 3 | RNVC: 2
12602650: RNCC: D | RNVC: 9

27 Apr 2018

3040-01-674-5134
Shouldered Shaft

016745134
1711981: RNCC: 3 | RNVC: 2

31 Jul 2018

3040-01-678-0162
Body Hub

016780162
3949701: RNCC: 3 | RNVC: 2

16 Jan 2019

3040-01-678-6128
Shouldered Shaft

016786128
587 71 55-01: RNCC: 3 | RNVC: 2

14 Feb 2019

3040-01-680-5371
Mechanically Actuated Spindle

016805371
8100-1252-0236 PC 202: RNCC: 3 | RNVC: 2
8100-1252-0236 SH 44 F/N 202: RNCC: 5 | RNVC: 2
8100-1252-0236 SH 41 DET 41-B: RNCC: 5 | RNVC: 2

9 May 2019

3040-01-687-8279
Rigid Connecting Link

016878279
W-NR-06-00: RNCC: 3 | RNVC: 2

21 Apr 2020

3040-01-689-0439
Flexible Shaft Assembly

016890439
22001-100X7FT1IN: RNCC: 3 | RNVC: 2
22001-100X85IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-690-0147
Hydraulic Accumulator

016900147
304L-HDF8-2250: RNCC: 3 | RNVC: 2
NV1028190-FIND NO 71: RNCC: 5 | RNVC: 1

21 Jul 2020

3040-01-691-1052
Flexible Shaft Assembly

016911052
01582149: RNCC: 3 | RNVC: 2
666010373 PL: RNCC: D | RNVC: 9

22 Sep 2020

3040-01-692-8346
Counterbalance Weight

016928346
206-011-157-103: RNCC: 3 | RNVC: 2

13 Jan 2021

3040-01-692-9119
Multiple Gears Gearshaft

016929119
8592281-101: RNCC: 3 | RNVC: 2
311-8592281: RNCC: D | RNVC: 9

19 Jan 2021

3040-12-341-6794
Shouldered Shaft

123416794
5550610105: RNCC: 3 | RNVC: 2
555 061 01 05: RNCC: 5 | RNVC: 9
M033621/00DE ITEM 070042: RNCC: 5 | RNVC: 9
M033621/00DE SH 58 C/N 01: RNCC: 5 | RNVC: 9

15 Oct 1996

3040-12-343-7810
Bell Crank

123437810
5550611219: RNCC: 3 | RNVC: 2
555.06112.19: RNCC: 5 | RNVC: 9
M033621/00DE.ITEM.070046: RNCC: 5 | RNVC: 9

28 Jul 1997

3040-12-345-9462
Ball Joint

123459462
0114 4100: RNCC: 3 | RNVC: 2
H3603-CLS10/1: RNCC: 5 | RNVC: 2

20 May 1998

3040-12-351-0942
Extension Shaft

123510942
5.106-024: RNCC: 3 | RNVC: 2
5-106-024: RNCC: 5 | RNVC: 9

26 Jun 2000

3040-12-356-3472
Rigid Connecting Link

123563472
027511304: RNCC: 3 | RNVC: 2

18 Feb 2002

3040-12-357-2922
Shouldered Shaft

123572922
027514601: RNCC: 3 | RNVC: 2

4 Jun 2002

3040-12-371-1988
Rotating Shaft Eye Bracket

123711988
866406701: RNCC: 2 | RNVC: 2
866406701: RNCC: 3 | RNVC: 2

27 Feb 2007

3040-12-375-2980
Piston Ring

123752980
8600-016-14-093000: RNCC: 3 | RNVC: 2

16 May 2008

3040-12-371-5864
Friction Lining

123715864
000798300: RNCC: 3 | RNVC: 2

20 Apr 2007

3040-14-540-5935
Straight Shaft

145405935
4351369: RNCC: 3 | RNVC: 2
5366603: RNCC: 5 | RNVC: 2

7 Apr 2004

3040-14-490-1381
Shouldered Shaft

144901381
034-59108: RNCC: 3 | RNVC: 9
S1-ML055-A ITEM POS13C: RNCC: 5 | RNVC: 9

17 Sep 1997

3040-14-553-5021
Rigid Connecting Link

145535021
4395265: RNCC: 3 | RNVC: 2

10 Apr 2007

3040-14-553-5167
Control Cam

145535167
4314897: RNCC: 3 | RNVC: 2

11 Apr 2007

3040-15-060-4664
Pawl

150604664
1276-23-559: RNCC: 3 | RNVC: 2

28 Sep 1981

3040-15-068-5655
Lever Remote Contro

150685655
73512F02: RNCC: 3 | RNVC: 2
73512P02: RNCC: 5 | RNVC: 2
73512P0: RNCC: 5 | RNVC: 9

10 Apr 1986

3040-15-068-5674
Special Retainer

150685674
71060F01: RNCC: 3 | RNVC: 2
71060F01: RNCC: 3 | RNVC: 2
71060F01: RNCC: 5 | RNVC: 2
71060F01: RNCC: 5 | RNVC: 9

18 May 1999

3040-15-152-9227
Spur Gearshaft

151529227
75053F01: RNCC: 3 | RNVC: 2

7 Nov 2000

3040-17-113-5867
Rigid Connecting Link

171135867
949901: RNCC: 3 | RNVC: 2
C949901: RNCC: 5 | RNVC: 2

29 Sep 2000

3040-17-120-2190
Rigid Connecting Link

171202190
9452405: RNCC: 3 | RNVC: 2
C9452405: RNCC: 5 | RNVC: 2

13 Mar 2007

3040-17-115-3429
Straight Shaft

171153429
945354: RNCC: 3 | RNVC: 2
C945354: RNCC: 5 | RNVC: 2

23 Dec 2002

3040-20-002-8088
Linear Actuating Cylinder

200028088
HC4645: RNCC: 3 | RNVC: 2

27 Jun 2006

3040-20-007-0521
Bell Crank

200070521
AC86895-14-02: RNCC: 3 | RNVC: 2

30 Jul 2012

3040-17-118-3947
Shouldered Axle

171183947
VJ-1061: RNCC: 3 | RNVC: 2

10 Mar 2006

3040-21-878-6687
Ball Joint

218786687
10501124: RNCC: 1 | RNVC: 2
065217002633: RNCC: 3 | RNVC: 2
J-65-BJ-3000-A-11: RNCC: 3 | RNVC: 2
24018296-04: RNCC: 5 | RNVC: 9

14 Feb 1978

3040-25-120-9562
Shouldered Shaft

251209562
67590: RNCC: 3 | RNVC: 2
67590: RNCC: 5 | RNVC: 2

26 Jul 1989

3040-33-205-8568
Piston Follower Cup

332058568
5147035: RNCC: 3 | RNVC: 2

20 Apr 2007

3040-22-269-2235
Single Disk Brake

222692235
53418000: RNCC: 3 | RNVC: 2
16KNS-16E POS 15: RNCC: 5 | RNVC: 2

27 Jan 1997

3040-99-010-0501
Rigid Connecting Link

990100501
MBEU144037: RNCC: 3 | RNVC: 2
B-MBEU144037: RNCC: 5 | RNVC: 2
MBEU144037: RNCC: 5 | RNVC: 2
MBEU144037: RNCC: 8 | RNVC: 2

24 Nov 1992

3040-99-028-4854
Linear Actuating Cylinder Assembly

990284854
1501826: RNCC: 3 | RNVC: 2

24 Oct 1994

3040-01-609-7143
Shouldered Shaft

016097143
5158T93G01: RNCC: 3 | RNVC: 2

1 Aug 2012

3040-01-654-0312
E-Pwr Con Act Inpt

016540312
252T2118-6: RNCC: 3 | RNVC: 1

14 Apr 2016

3040-01-654-3591
Linear Actuating Cylinder Piston Rod

016543591
EP-0021952: RNCC: 3 | RNVC: 2
KALM050021100R1: RNCC: 5 | RNVC: 9

26 Apr 2016

3040-12-408-1850
Straight Shaft

3040-41-002-6060
Straight Shaft

3040-98-208-8140
Pn Control Assembly

3040-01-528-1634
Nonaircraft Mechanical Actuator

015281634
APC30302: RNCC: 3 | RNVC: 2
APC30302: RNCC: 5 | RNVC: 2

4 Mar 2005

3040-01-528-4217
Shouldered Shaft

015284217
11581649: RNCC: 3 | RNVC: 2

11 Mar 2005

3040-01-528-6323
Shaft Collar

015286323
0314SPR023: RNCC: 3 | RNVC: 2
314-23: RNCC: 5 | RNVC: 9

21 Mar 2005

3040-01-529-8105
Linear Actuating Cylinder Piston Rod

015298105
87413722: RNCC: 3 | RNVC: 2

3 May 2005

3040-01-531-5107
Linear Actuating Cylinder Assembly

015315107
108572: RNCC: 3 | RNVC: 2

13 Jul 2005

3040-01-532-0908
Ai Emerg Toggle Cam

015320908
B43269-1: RNCC: 3 | RNVC: 2
B43269: RNCC: D | RNVC: 9

28 Jul 2005

3040-01-532-8831
Remote Control Lever

015328831
12477954: RNCC: 3 | RNVC: 2

23 Aug 2005

3040-01-535-5701
Counterbalance Weight

015355701
660509681: RNCC: 3 | RNVC: 2

5 Dec 2005

3040-01-535-4038
Shouldered Shaft

015354038
515-4674116 ITEM 28: RNCC: 3 | RNVC: 2

29 Nov 2005

3040-01-537-2957
Rigid Connecting Link

015372957
12488074: RNCC: 3 | RNVC: 2

2 Feb 2006

3040-01-537-6565
Shouldered Shaft

015376565
7002822: RNCC: 3 | RNVC: 2

16 Feb 2006

3040-01-538-2236
Straight Shaft

015382236
GXLB-99-16-031-0: RNCC: 3 | RNVC: 2
24087-512-0149 P/L PG 5: RNCC: 5 | RNVC: 2

15 Mar 2006

3040-01-538-9619
Rigid Connecting Link

015389619
MP-0001470G: RNCC: 3 | RNVC: 2
923828.0844: RNCC: 5 | RNVC: 2
CV187136: RNCC: 5 | RNVC: 2
923828.0844: RNCC: 5 | RNVC: 2
9238280844: RNCC: 5 | RNVC: 9

5 Apr 2006

3040-01-539-2398
Shaft Collar

015392398
F-WK-871-4 PC 124: RNCC: 3 | RNVC: 2

14 Apr 2006

3040-01-539-6276
Control Cam

015396276
2678262: RNCC: 3 | RNVC: 2

27 Apr 2006

3040-01-539-5912
Housing Adapter

015395912
12326418: RNCC: 3 | RNVC: 2

26 Apr 2006

3040-01-539-9368
Linear Actuating Cylinder Assembly Parts Kit

015399368
AH212101: RNCC: 3 | RNVC: 2
AH212101: RNCC: 5 | RNVC: 2
AH212101: RNCC: 5 | RNVC: 9
AH212101: RNCC: 5 | RNVC: 9

4 May 2006

3040-01-540-0304
Straight Shaft

015400304
167-6404600 FIND 80: RNCC: 3 | RNVC: 2

8 May 2006

3040-01-541-7305
Straight Shaft

015417305
1079270: RNCC: 3 | RNVC: 2

10 Jul 2006

3040-01-541-9755
Rigid Connecting Link

015419755
100215: RNCC: 3 | RNVC: 2

19 Jul 2006

3040-01-542-4567
Manual Control Lever

015424567
EP-0002902: RNCC: 3 | RNVC: 2
922172.0015: RNCC: 5 | RNVC: 2
CV187094: RNCC: 5 | RNVC: 2
9221720015: RNCC: 5 | RNVC: 9

7 Aug 2006

3040-01-543-3934
Body Hub

015433934
458/10838: RNCC: 3 | RNVC: 2
458/10838: RNCC: 5 | RNVC: 2
458/10838: RNCC: 5 | RNVC: 2

12 Sep 2006

3040-01-543-0960
Shaft Collar

015430960
9129-0009: RNCC: 3 | RNVC: 2

29 Aug 2006

3040-01-544-1456
Rigid Connecting Link

015441456
E601172000: RNCC: 3 | RNVC: 2

3 Oct 2006

3040-01-544-8917
Straight Shaft

015448917
23077207: RNCC: 3 | RNVC: 2
23077207: RNCC: 5 | RNVC: 9
23077207: RNCC: C | RNVC: 1

25 Oct 2006

3040-01-545-2991
Shouldered Shaft Assembly

015452991
F2-78-1: RNCC: 3 | RNVC: 2
K261-C40518: RNCC: 3 | RNVC: 9

8 Nov 2006

3040-01-545-6569
Straight Shaft

015456569
0417 8202: RNCC: 3 | RNVC: 2

20 Nov 2006

3040-01-546-1057
Linear Actuating Cylinder Cap

015461057
594/14287: RNCC: 3 | RNVC: 2

6 Dec 2006

3040-01-546-1408
Body Hub

015461408
12221-999-000: RNCC: 3 | RNVC: 2
12270PL FIND 2 PN 12221-999-000: RNCC: 5 | RNVC: 2

7 Dec 2006

3040-01-546-2015
Linear Actuating Cylinder Piston

015462015
37059: RNCC: 3 | RNVC: 2
1001362: RNCC: 5 | RNVC: 2

8 Dec 2006

3040-01-546-0706
Shaft Retaining Plate

015460706
25172212: RNCC: 3 | RNVC: 2
297KB220: RNCC: 5 | RNVC: 2
297KB 124P1: RNCC: 5 | RNVC: 9

5 Dec 2006

3040-01-546-9408
Multiple Disk Brake

015469408
F048148: RNCC: 3 | RNVC: 2
6735-3520: RNCC: 5 | RNVC: 2

9 Jan 2007

3040-01-546-6689
Vane Act-Cpr Arm

015466689
9125M65G08: RNCC: 3 | RNVC: 2
9125M65: RNCC: D | RNVC: 9

26 Dec 2006

3040-01-547-7957
Aircraftraft Lever Assy

015477957
42555-273: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-547-7451
Angle Assy Top Bar

015477451
16242006-14: RNCC: 3 | RNVC: 2
16241014 FIND NO. 8: RNCC: 5 | RNVC: 2
16242006-14: RNCC: 5 | RNVC: 9

31 Jan 2007

3040-01-547-8137
Aircraft Inr Shaft

015478137
42555-330: RNCC: 3 | RNVC: 2

1 Feb 2007

3040-01-547-8677
Straight Shaft Assembly

015478677
200726103: RNCC: 1 | RNVC: 2
897487: RNCC: 3 | RNVC: 2
B20610-100-G: RNCC: 5 | RNVC: 2

1 Feb 2007

3040-01-548-4752
Linear Actuating Cylinder Piston

015484752
87618685: RNCC: 3 | RNVC: 2
87417651: RNCC: 3 | RNVC: 9

23 Feb 2007

3040-01-548-7202
Lh Knurled Rlr Assy

015487202
F058483: RNCC: 3 | RNVC: 2
F057783 IT 3: RNCC: 5 | RNVC: 2

2 Mar 2007

3040-01-549-2004
Worm Wheel Gearshaft

015492004
CL40FRSBML-A: RNCC: 3 | RNVC: 2

14 Mar 2007

3040-01-548-9422
Linear Actuating Cylinder Head

015489422
297283A1: RNCC: 3 | RNVC: 2

7 Mar 2007

3040-01-549-1238
Rigid Connecting Link

015491238
393080: RNCC: 3 | RNVC: 2
316250: RNCC: 3 | RNVC: 9
316250: RNCC: 5 | RNVC: 9

12 Mar 2007

3040-01-549-6295
Rigid Connecting Link

015496295
347/00246: RNCC: 3 | RNVC: 2

27 Mar 2007

3040-01-549-6150
Nonaircraft Mechanical Actuator

015496150
90024-02: RNCC: 3 | RNVC: 2
P-2415 P/N 90024-02: RNCC: 5 | RNVC: 2
NP90024-02: RNCC: 5 | RNVC: 2
P-2415: RNCC: D | RNVC: 9

26 Mar 2007

3040-01-549-6080
Bell Crank

015496080
112382A1: RNCC: 3 | RNVC: 2
112382A1: RNCC: 5 | RNVC: 2

26 Mar 2007

3040-01-550-2201
Shouldered Shaft

015502201
934380: RNCC: 3 | RNVC: 2

12 Apr 2007

3040-01-551-2282
Rigid Connecting Link

015512282
74A182200-1005: RNCC: 3 | RNVC: 2
74A182200-1003: RNCC: E | RNVC: 8

10 May 2007

3040-01-552-0090
Counterbalance Weight

015520090
38150-09424-105: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-552-0094
Counterbalance Weight

015520094
38150-09424-107: RNCC: 3 | RNVC: 2

1 Jun 2007

3040-01-552-4047
Disc Brake Caliper Assembly

015524047
625SB-CC: RNCC: 3 | RNVC: 2
191903: RNCC: 5 | RNVC: 2
20864004 FN14: RNCC: 5 | RNVC: 2
20864007 FN7: RNCC: 5 | RNVC: 2
20864025: RNCC: 5 | RNVC: 2

13 Jun 2007

3040-01-554-9191
Shouldered Shaft

015549191
GMRW355Z11D25: RNCC: 3 | RNVC: 2
K77 ITEM 25: RNCC: 5 | RNVC: 2

23 Aug 2007

3040-01-555-1059
Straight Shaft Assembly

015551059
8E3508: RNCC: 3 | RNVC: 2

29 Aug 2007

3040-01-555-2937
Shouldered Shaft

015552937
998SR613----G: RNCC: 3 | RNVC: 2
CHF-6205DBY-RA-165 PC1-06: RNCC: 5 | RNVC: 2

31 Aug 2007

3040-01-555-7895
Shouldered Shaft

015557895
29536984: RNCC: 3 | RNVC: 2

13 Sep 2007

3040-01-556-1186
Detent Plate

015561186
G611657-1: RNCC: 3 | RNVC: 2

25 Sep 2007

3040-01-556-1303
Linear Actuating Cylinder Assembly

015561303
BB 1/2X1 3/4-3SP-1-4J-2: RNCC: 3 | RNVC: 2
104723: RNCC: 5 | RNVC: 2
PLH568C001 FN 3: RNCC: 5 | RNVC: 2

25 Sep 2007

3040-01-558-0892
Shouldered Shaft

015580892
1D27-3: RNCC: 3 | RNVC: 2

31 Oct 2007

3040-01-559-6247
Shouldered Shaft

015596247
14365: RNCC: 3 | RNVC: 2
14KP781: RNCC: 5 | RNVC: 2
14KP781: RNCC: 5 | RNVC: 9

27 Dec 2007

3040-01-560-1901
Counterbalance Weight

015601901
2116M38P04: RNCC: 3 | RNVC: 2

17 Jan 2008

3040-01-560-4277
Shaft Collar

015604277
820-8225635-3: RNCC: 3 | RNVC: 2
820-4551674-32: RNCC: 5 | RNVC: 2
ACL40-316: RNCC: 5 | RNVC: 2

30 Jan 2008

3040-01-559-4475
Rigid Connecting Link

015594475
74A410576-1006: RNCC: 3 | RNVC: 2
74A410576-1006: RNCC: 5 | RNVC: 2
74A410576-1006: RNCC: 5 | RNVC: 2
74A410576-1006: RNCC: 5 | RNVC: 2
74A410576-1006: RNCC: 5 | RNVC: 2
74A410576-1006: RNCC: 5 | RNVC: 2
74A410576-1006: RNCC: 5 | RNVC: 2
74A410576-1006: RNCC: 5 | RNVC: 2
74A410576-1006: RNCC: 5 | RNVC: 9
74A410576-1006: RNCC: 5 | RNVC: 9

18 Dec 2007

3040-01-561-3708
Body Hub

015613708
12612M-442-000: RNCC: 3 | RNVC: 2
12221PL FN 2 P/N 12612M-442-000: RNCC: 5 | RNVC: 2

4 Mar 2008

3040-01-561-4344
Push-Pull Control Assembly

015614344
8M0153958: RNCC: 3 | RNVC: 2
889694: RNCC: 5 | RNVC: 2
889694: RNCC: 5 | RNVC: 9
8M0080491: RNCC: 5 | RNVC: 9

5 Mar 2008

3040-01-561-9556
Control Cam

015619556
3696636: RNCC: 3 | RNVC: 2
3696636: RNCC: 5 | RNVC: 9

24 Mar 2008

3040-01-561-8563
Shouldered Shaft

015618563
AM0-0122: RNCC: 3 | RNVC: 2

20 Mar 2008

3040-01-561-7725
Shaft Collar

015617725
13940401-02: RNCC: 3 | RNVC: 2

18 Mar 2008

3040-01-562-7864
Ball Joint Parts Kit

015627864
87420849: RNCC: 3 | RNVC: 2

22 Apr 2008

3040-01-562-9892
Breather

015629892
ABF-3/10-F: RNCC: 3 | RNVC: 2
FB10 AND101302: RNCC: 5 | RNVC: 2

29 Apr 2008

3040-01-563-9209
Rigid Connecting Link

015639209
803-6397268 PC 189: RNCC: 3 | RNVC: 2

29 May 2008

3040-01-563-9631
Manual Control Lever

015639631
03580: RNCC: 3 | RNVC: 2

30 May 2008

3040-01-564-0349
Shaft Assy-Door Handle(Rh)

015640349
3683136C91: RNCC: 3 | RNVC: 2
3683136C91L: RNCC: 5 | RNVC: 9

3 Jun 2008

3040-01-564-5419
Shouldered Shaft

015645419
1862260: RNCC: 3 | RNVC: 2
1862260: RNCC: 5 | RNVC: 9

19 Jun 2008

3040-01-564-5678
Linear Actuating Cylinder Assembly

015645678
MIL-001-078: RNCC: 3 | RNVC: 2

20 Jun 2008

3040-01-564-6486
Pivot Shaft Assembly

015646486
22KP126: RNCC: 3 | RNVC: 2
12508450: RNCC: 5 | RNVC: 2
22KP126: RNCC: 5 | RNVC: 9

24 Jun 2008

3040-01-564-6634
Rigid Connecting Link

015646634
803-6397268 PC 194: RNCC: 3 | RNVC: 2
803-6397268: RNCC: D | RNVC: 9

24 Jun 2008

3040-01-564-9973
Control Cam

015649973
16875-58R-75: RNCC: 3 | RNVC: 2

8 Jul 2008

3040-01-566-0794
Straight Shaft

015660794
CPGSA320: RNCC: 3 | RNVC: 2
3005519 FIND 6: RNCC: 5 | RNVC: 2

19 Aug 2008

3040-01-566-4370
Linear Actuating Cylinder Assembly

015664370
3691710C91: RNCC: 3 | RNVC: 2
1C-4992: RNCC: 5 | RNVC: 2
3113266C92L: RNCC: 5 | RNVC: 9
3113266C93L: RNCC: 5 | RNVC: 9
3691710C91L: RNCC: 5 | RNVC: 9
IC-4711: RNCC: 5 | RNVC: 9

2 Sep 2008

3040-01-567-2466
Inertia Damper

015672466
12505368-003: RNCC: 3 | RNVC: 2
12505368-003: RNCC: 5 | RNVC: 2
12505368-003: RNCC: 5 | RNVC: 9

22 Sep 2008

3040-01-567-3551
Push-Pull Control Assembly

015673551
UFLMC0X34: RNCC: 3 | RNVC: 9
216-MC0X34: RNCC: 5 | RNVC: 9

24 Sep 2008

3040-01-568-3043
Shouldered Shaft

015683043
12505517: RNCC: 3 | RNVC: 2

27 Oct 2008

3040-01-569-2016
Brake Lining Kit

015692016
259-0128: RNCC: 3 | RNVC: 2
259-0128: RNCC: 5 | RNVC: 2
259-0128: RNCC: 5 | RNVC: 2
259-0128: RNCC: 5 | RNVC: 2
259-0128: RNCC: 5 | RNVC: 2

21 Nov 2008

3040-01-569-2692
Rigid Connecting Link

015692692
1402-21025-34: RNCC: 3 | RNVC: 2
1402-21025-34: RNCC: 5 | RNVC: 2

25 Nov 2008

3040-01-569-0839
Shouldered Shaft

015690839
1402-21040-33: RNCC: 3 | RNVC: 2

19 Nov 2008

3040-01-570-3385
Breather

015703385
P03249: RNCC: 3 | RNVC: 2
HC-120-PT 12-P5: RNCC: 5 | RNVC: 2

23 Dec 2008

3040-01-570-5925
Shaft Collar

015705925
6439125-01M1: RNCC: 3 | RNVC: 9
6439125-01M1: RNCC: 5 | RNVC: 2
6439125-01M1: RNCC: C | RNVC: 1

7 Jan 2009

3040-01-570-4504
Straight Shaft

015704504
5016106: RNCC: 3 | RNVC: 2

31 Dec 2008

3040-01-570-7830
Manual Control Lever

015707830
12505999-003: RNCC: 1 | RNVC: 2
MIL-1-16927-R-23: RNCC: 3 | RNVC: 2
1250999: RNCC: D | RNVC: 9

14 Jan 2009

3040-01-570-9831
Shaft Retaining Plate

015709831
145K435G01: RNCC: 3 | RNVC: 2
145K435G01: RNCC: 5 | RNVC: 2
145K435: RNCC: 5 | RNVC: 2

21 Jan 2009

3040-01-572-2730
Straight Axle

015722730
231-0698: RNCC: 3 | RNVC: 2

5 Mar 2009

3040-01-572-7368
Shaftt Kit

015727368
8M0142997: RNCC: 3 | RNVC: 2
878241A02: RNCC: 5 | RNVC: 9

24 Mar 2009

3040-01-573-5242
Straight Shaft

015735242
111932201: RNCC: 3 | RNVC: 9
111932201: RNCC: 5 | RNVC: 2

27 Apr 2009

3040-01-573-9448
Linear Actuating Cylinder Piston Rod

015739448
87750127: RNCC: 3 | RNVC: 2
87705800: RNCC: D | RNVC: 9

11 May 2009

3040-01-575-0000
Manual Control Lever Assembly

015750000
1683821: RNCC: 3 | RNVC: 2
1683821: RNCC: 5 | RNVC: 2

17 Jun 2009

3040-01-574-9140
Rigid Connecting Link

015749140
GS-5114: RNCC: 3 | RNVC: 2

15 Jun 2009

3040-01-575-7080
Rigid Connecting Link

015757080
WWS 50286-3407: RNCC: 3 | RNVC: 2
50286-3406: RNCC: D | RNVC: 9

13 Jul 2009

3040-01-575-7676
Rigid Connecting Link

015757676
18-58865-000: RNCC: 3 | RNVC: 2
18-58865: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-575-7821
Straight Shaft

015757821
12506001-003: RNCC: 3 | RNVC: 2
12506001: RNCC: D | RNVC: 9

14 Jul 2009

3040-01-576-4903
Control Cam

015764903
6444006-01M1: RNCC: 3 | RNVC: 9
6444006-01M1: RNCC: 5 | RNVC: 2
6444006-01M1: RNCC: C | RNVC: 1

3 Aug 2009

3040-01-578-1391
Piston Ring

015781391
29546157: RNCC: 3 | RNVC: 2
22KP855: RNCC: 7 | RNVC: 2

28 Sep 2009

3040-01-579-8509
Shouldered Shaft

015798509
12509337: RNCC: 3 | RNVC: 2
12509337: RNCC: 7 | RNVC: 2

25 Nov 2009

3040-01-580-4028
Straight Axle

015804028
6706427: RNCC: 3 | RNVC: 2

14 Dec 2009

3040-01-581-0088
Slipper Seal

015810088
P05238: RNCC: 3 | RNVC: 2
E108130 FIND 51: RNCC: 5 | RNVC: 2
E108130: RNCC: D | RNVC: 9

4 Jan 2010

3040-01-581-3190
Rigid Connecting Link

015813190
3671263L01010-3: RNCC: 3 | RNVC: 2
3671263L01010-3: RNCC: 3 | RNVC: 9

13 Jan 2010

3040-01-581-8451
Control Cam

015818451
5005186: RNCC: 3 | RNVC: 2

29 Jan 2010

3040-01-582-4488
Linear Actuating Cylinder Assembly

015824488
0312107124-00: RNCC: 3 | RNVC: 2
26KP359: RNCC: 7 | RNVC: 2
031217048-00: RNCC: D | RNVC: 9

22 Feb 2010

3040-01-583-5722
Linear Actuating Cylinder Assembly

015835722
1521-61-21S-8X24 S=#6SAE@2: RNCC: 3 | RNVC: 2
1521-61-2-1-S-SX24: RNCC: 5 | RNVC: 9

30 Mar 2010

3040-01-583-8831
Pneumatic Control Assembly

015838831
676612: RNCC: 3 | RNVC: 9
3716055C1: RNCC: 5 | RNVC: 2

9 Apr 2010

3040-01-583-8676
Nonaircraft Mechanical Actuator

015838676
ABP N83 301269: RNCC: 3 | RNVC: 2
RDH RD5 6320 0: RNCC: 5 | RNVC: 9

8 Apr 2010

3040-01-584-5654
Rigid Connecting Link

015845654
204-030-483-103: RNCC: 3 | RNVC: 2

29 Apr 2010

3040-01-585-0900
Shaft Retaining Plate

015850900
891-12415: RNCC: 3 | RNVC: 2

14 May 2010

3040-01-584-9789
Shouldered Shaft Assembly

015849789
1D6004-7AEQ: RNCC: 3 | RNVC: 2

12 May 2010

3040-01-585-2486
Manual Control Lever

015852486
OP9001SL: RNCC: 3 | RNVC: 2

20 May 2010

3040-01-590-1463
Straight Shaft

015901463
12716-3: RNCC: 3 | RNVC: 2
12716 ITEM 3: RNCC: 5 | RNVC: 2

19 Nov 2010

3040-01-590-5300
Mechanical Drive Housing

015905300
10023633: RNCC: 3 | RNVC: 2

8 Dec 2010

3040-01-591-1754
Shaft Collar

015911754
R190,705: RNCC: 3 | RNVC: 9
R190,705: RNCC: 5 | RNVC: 2

13 Jan 2011

3040-01-591-1743
Rotating Shaft Eye Bracket

015911743
R190,629: RNCC: 3 | RNVC: 9

13 Jan 2011

3040-01-591-7317
Actuator Cover

015917317
7206838-1: RNCC: 3 | RNVC: 2

7 Feb 2011

3040-01-591-9211
Rigid Connecting Link

015919211
3708306C1: RNCC: 3 | RNVC: 2

15 Feb 2011

3040-01-592-1353
Nonaircraft Mechanical Actuator

015921353
13046631: RNCC: 3 | RNVC: 2
205631: RNCC: 5 | RNVC: 2

22 Feb 2011

3040-01-593-9626
Control Cam

015939626
SLB60: RNCC: 3 | RNVC: 2

22 Apr 2011

3040-01-595-7660
Manual Control Lever

015957660
707794: RNCC: 3 | RNVC: 2
707794-A: RNCC: 5 | RNVC: 9
702369 ITEM 114: RNCC: 5 | RNVC: 9

5 May 2011

3040-01-596-7268
Straight Shaft

015967268
30111-94469: RNCC: 3 | RNVC: 9
8726959-04: RNCC: 5 | RNVC: 2
331-8417739 ITEM 8: RNCC: 5 | RNVC: 2

23 May 2011

3040-01-597-0650
Shaft Collar

015970650
3745170: RNCC: 3 | RNVC: 2
3745170: RNCC: 5 | RNVC: 9

25 May 2011

3040-01-597-2867
Shaft Collar

015972867
7019315-01: RNCC: 3 | RNVC: 2

6 Jun 2011

3040-01-597-6760
Nonrotating Shaft Eye Bracket

015976760
C01J18019: RNCC: 3 | RNVC: 2

20 Jun 2011

3040-01-600-0494
Shaft Collar

016000494
10010864: RNCC: 3 | RNVC: 2

4 Nov 2011

3040-01-601-0954
Shouldered Shaft

016010954
52720819: RNCC: 3 | RNVC: 2
24KP268: RNCC: 5 | RNVC: 2
24KP268: RNCC: 5 | RNVC: 9

5 Jan 2012

3040-01-601-9028
Pawl

016019028
7662447: RNCC: 3 | RNVC: 2
53711 7662447: RNCC: 5 | RNVC: 2
06207530: RNCC: 5 | RNVC: 2
7662447: RNCC: 5 | RNVC: 2
06207529: RNCC: 5 | RNVC: 9

26 Jan 2012

Load More Results