What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 116 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 116of 575

3040-01-148-9527
Input Shaft

011489527
4775959-0034: RNCC: 3 | RNVC: 2
2642-982-03 PC34: RNCC: 5 | RNVC: 2
845-4687756 ITEM 110: RNCC: 5 | RNVC: 2
4775959-0034: RNCC: 5 | RNVC: 2
2642-982-01 ITEM 110: RNCC: 5 | RNVC: 9
845-4687756: RNCC: D | RNVC: 9
2642-982-01: RNCC: D | RNVC: 9

13 Mar 1983

3040-01-166-0582
Actuator Transmission Brake

011660582
KSMR3PT50-S50106: RNCC: 3 | RNVC: 2
10502577: RNCC: 5 | RNVC: 2
KSMR3PT50-S50106: RNCC: 5 | RNVC: 9
KSMR3PT501300NN: RNCC: 5 | RNVC: 9

6 Nov 1983

3040-01-147-9968
Remote Control Lever

011479968
12310975: RNCC: 3 | RNVC: 2
12285024: RNCC: E | RNVC: 8

26 Feb 1983

3040-01-148-8861
Push-Pull Control Assembly

011488861
8126745 98749: RNCC: 1 | RNVC: 2
048701-00-108FM: RNCC: 3 | RNVC: 2
048701-00-108FM: RNCC: 5 | RNVC: 2
048701-00-108FM: RNCC: 5 | RNVC: 9
8126745: RNCC: 5 | RNVC: 9
048701-00-108.C: RNCC: 5 | RNVC: 9
8126745: RNCC: 5 | RNVC: 9

11 Mar 1983

3040-01-166-2423
Shouldered Shaft

011662423
562243: RNCC: 3 | RNVC: 2
562243: RNCC: 5 | RNVC: 2

9 Nov 1983

3040-01-154-7829
Shouldered Shaft

011547829
10501012: RNCC: 3 | RNVC: 2

31 May 1983

3040-01-159-7135
Rigid Connecting Link

011597135
176C2591: RNCC: 3 | RNVC: 2
176C2591: RNCC: 5 | RNVC: 9

13 Aug 1983

3040-01-147-8568
Linear Actuating Cylinder Assembly

011478568
1H000027559: RNCC: 3 | RNVC: 2
1 1/2C2ATS14X9 5/8: RNCC: 5 | RNVC: 9
11/2C2ATS14X9.625: RNCC: 5 | RNVC: 9
FF035656A0: RNCC: 5 | RNVC: 9
3040PL1388789: RNCC: 6 | RNVC: 9
W121871: RNCC: C | RNVC: 1

23 Feb 1983

3040-01-109-4572
Straight Shaft

011094572
11629062: RNCC: 3 | RNVC: 2
11629062: RNCC: 5 | RNVC: 2

15 Mar 1981

3040-01-130-4541
Wheel Brake

011304541
9914.0413: RNCC: 3 | RNVC: 2
9914.0413: RNCC: 5 | RNVC: 2
2DY740: RNCC: 5 | RNVC: 2
BR-122-A: RNCC: 5 | RNVC: 2
9914.0413: RNCC: 5 | RNVC: 9
2DY740: RNCC: 5 | RNVC: 9
ISO-41-27: RNCC: 5 | RNVC: 9
9914-0413: RNCC: 5 | RNVC: 9

22 Apr 1982

3040-01-113-6244
Flexible Control Casing

011136244
3906503-9: RNCC: 3 | RNVC: 2
10106288: RNCC: 6 | RNVC: 9

30 May 1981

3040-01-118-1141
Worm Wheel Shaft

011181141
99139870: RNCC: 3 | RNVC: 2
39870: RNCC: 5 | RNVC: 9
3040PL0663009: RNCC: 6 | RNVC: 9

27 Aug 1981

3040-01-124-0867
Shouldered Shaft

011240867
4202023-1: RNCC: 3 | RNVC: 2
10106806: RNCC: 6 | RNVC: 9

27 Dec 1981

3040-01-089-3954
Counterbalance Weight

010893954
387384CL5: RNCC: 3 | RNVC: 2
387384CL5: RNCC: 5 | RNVC: 2

31 Jan 1980

3040-01-094-3015
Manual Control Lever

010943015
20380-001 FIND 32: RNCC: 3 | RNVC: 9
631C23-3: RNCC: 5 | RNVC: 2
631B23-3: RNCC: C | RNVC: 1
8-52N-680: RNCC: C | RNVC: 1
20380-001: RNCC: D | RNVC: 9

7 May 1980

3040-01-113-6467
Rigid Connecting Link

011136467
4-82017-1: RNCC: 3 | RNVC: 2
4-82017-1: RNCC: 3 | RNVC: 9
4-82017-1: RNCC: 5 | RNVC: 9
4-82017-1: RNCC: 5 | RNVC: 9
4-82017-1: RNCC: 5 | RNVC: 9
4-82017-1: RNCC: C | RNVC: 1
4-82017: RNCC: D | RNVC: 9

30 May 1981

3040-01-128-5717
Nonrotating Shaft Eye Bracket

011285717
12311028: RNCC: 3 | RNVC: 2

25 Mar 1982

3040-01-087-0436
Remote Control Lever

010870436
2585331: RNCC: 3 | RNVC: 2
2585331: RNCC: 5 | RNVC: 9

10 Dec 1979

3040-01-105-7166
Bell Crank

011057166
12269089: RNCC: 3 | RNVC: 2

3 Jan 1981

3040-01-109-6874
Hydraulic Accumulator Bladder

011096874
000SS-Z001-2: RNCC: 3 | RNVC: 2
000SS-Z005: RNCC: 5 | RNVC: 2
HS0-29-5N2: RNCC: 5 | RNVC: 9
HS0-29-6: RNCC: 5 | RNVC: 9
000SS-Z001: RNCC: D | RNVC: 9

19 Mar 1981

3040-01-107-1313
Nonrotating Shaft Eye Bracket

011071313
2584032: RNCC: 3 | RNVC: 2
2584032: RNCC: 5 | RNVC: 2
2584032: RNCC: 5 | RNVC: 2

30 Jan 1981

3040-01-120-9509
Manual Control Lever

011209509
2588254: RNCC: 1 | RNVC: 2
Q14094-1: RNCC: 3 | RNVC: 2
2600958: RNCC: 5 | RNVC: 2
Q14094: RNCC: 5 | RNVC: 9
2600958: RNCC: D | RNVC: 9

27 Oct 1981

3040-01-088-1916
Rigid Connecting Link

010881916
70400-01609-045: RNCC: 3 | RNVC: 2

8 Jan 1980

3040-01-137-8733
Shouldered Shaft

011378733
11319-D-18: RNCC: 3 | RNVC: 2
4X11S10X2: RNCC: 3 | RNVC: 2
4X11S10X2: RNCC: 3 | RNVC: 9
KMC-11319-D-18: RNCC: 5 | RNVC: 2
55-22208-15: RNCC: 5 | RNVC: 2
4X11-AP: RNCC: 5 | RNVC: 2
D-4X11S10X2: RNCC: 5 | RNVC: 9
11319-D-18: RNCC: 5 | RNVC: 9
4320PL1579827: RNCC: 6 | RNVC: 9

4 Sep 1982

3040-01-085-4284
Rigid Connecting Link

010854284
70400-02264-064: RNCC: 3 | RNVC: 2
70400-02264-064: RNCC: 5 | RNVC: 2
70400-02264-064: RNCC: 5 | RNVC: 2
70400-02264-056: RNCC: 5 | RNVC: 9
3040PL1954527: RNCC: 6 | RNVC: 9
70400-02264-064: RNCC: 7 | RNVC: 2

8 Nov 1979

3040-01-090-5935
Shaft Retaining Plate

010905935
70351-08024-101: RNCC: 3 | RNVC: 2

22 Feb 1980

3040-01-126-7461
Push-Pull Control Assembly

011267461
773-357-100-25: RNCC: 3 | RNVC: 2
4V9547: RNCC: 3 | RNVC: 2
773-357-100-25: RNCC: 5 | RNVC: 9

16 Feb 1982

3040-01-124-3880
Linear Actuating Cylinder

011243880
264269302-0001: RNCC: 3 | RNVC: 2
845-4687549 ITEM 1: RNCC: 3 | RNVC: 2
845-4687549: RNCC: D | RNVC: 9

1 Jan 1982

3040-01-084-2805
Linear Actuating Cylinder Head

010842805
4685194-0001: RNCC: 3 | RNVC: 2
87861-1507 ITEM 1: RNCC: 3 | RNVC: 2
21-85-6000: RNCC: 5 | RNVC: 2
704-4685194 ITEM 1: RNCC: 5 | RNVC: 2
87861-1507: RNCC: D | RNVC: 9
704-4685194: RNCC: D | RNVC: 9

14 Oct 1979

3040-01-059-3815
Counterbalance Weight

010593815
422633CLD: RNCC: 3 | RNVC: 2

10 Apr 1978

3040-01-083-5643
Remote Control Lever

010835643
12284026: RNCC: 3 | RNVC: 2
XM69475: RNCC: 5 | RNVC: 9

26 Sep 1979

3040-01-040-6672
Rigid Connecting Link

010406672
2-13432-7: RNCC: 3 | RNVC: 2
2-13432-7: RNCC: 3 | RNVC: 9
2-13432-7: RNCC: 5 | RNVC: 9

12 May 1977

3040-01-057-3713
Shouldered Shaft

010573713
302003K1: RNCC: 3 | RNVC: 2
302003K1: RNCC: 5 | RNVC: 9
8038B: RNCC: 5 | RNVC: 9
8038B: RNCC: 5 | RNVC: 9
200136UPC44: RNCC: 5 | RNVC: 9

11 Mar 1978

3040-01-031-7500
Plain * Rail

010317500
2507583: RNCC: 3 | RNVC: 2

2 Dec 1976

3040-01-050-1633
Ball Joint Assembly

010501633
27491-2: RNCC: 3 | RNVC: 2
2479247: RNCC: 5 | RNVC: 9
27491-2: RNCC: 5 | RNVC: 9
27491: RNCC: D | RNVC: 9

1 Nov 1977

3040-01-067-2358
Linear Actuating Cylinder Piston

010672358
9987-955PC5-18: RNCC: 3 | RNVC: 2
360076: RNCC: 3 | RNVC: 2
360277: RNCC: 5 | RNVC: 9

27 Oct 1978

3040-01-062-3704
Linear Actuating Cylinder Piston

010623704
28-86-0003: RNCC: 3 | RNVC: 2
4685194-003B: RNCC: 3 | RNVC: 2
4685194-0003: RNCC: 3 | RNVC: 9
87861-1506ITEM4: RNCC: 5 | RNVC: 2
28-86-0003B: RNCC: 5 | RNVC: 9
4685194-0003A: RNCC: 5 | RNVC: 9
4685194-0003AB: RNCC: 5 | RNVC: 9

15 Jul 1978

3040-01-050-0064
Bevel Gearshaft

010500064
16K0746-7: RNCC: 3 | RNVC: 2

30 Oct 1977

3040-01-058-5204
Linear Actuating Cylinder

010585204
N-1462: RNCC: 3 | RNVC: 2
1809-1289ITEM17: RNCC: 5 | RNVC: 2

28 Mar 1978

3040-01-084-4211
Cylinder Adjusting Screw

010844211
87861-1514 ITEM 8: RNCC: 3 | RNVC: 2
704-4685201 ITEM 8: RNCC: 3 | RNVC: 2
704-4685201: RNCC: D | RNVC: 9

18 Oct 1979

3040-01-033-6786
Wiper Rod

010336786
2637513PC9: RNCC: 1 | RNVC: 2
4615SHD00750: RNCC: 3 | RNVC: 2

8 Jan 1977

3040-00-948-6571
Straight Shaft

009486571
369A8065: RNCC: 3 | RNVC: 2
369A8065: RNCC: 5 | RNVC: 9
369A8065: RNCC: 5 | RNVC: 9

6 Apr 1966

3040-00-991-3709
Counterbalance Weight

009913709
426836CL6: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-01-004-1357
Rigid Connecting Link

010041357
160C121005-1: RNCC: 3 | RNVC: 2
3004-1: RNCC: 5 | RNVC: 2
SR11485A1: RNCC: 5 | RNVC: 2
160C121005-3: RNCC: 5 | RNVC: 2
3504-1: RNCC: 5 | RNVC: 2
3504-1-G: RNCC: 5 | RNVC: 2
SR11006A: RNCC: 5 | RNVC: 2
160C121005-1: RNCC: 5 | RNVC: 9
160C121005-3: RNCC: 5 | RNVC: 9

22 May 1975

3040-00-968-8747
Cam Shaft

009688747
W2F24546: RNCC: 3 | RNVC: 2
W2F24546: RNCC: 5 | RNVC: 2
W2F24546: RNCC: 5 | RNVC: 9
W2F24546: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-008-1396
Rigid Connecting Link

010081396
8741933: RNCC: 3 | RNVC: 2
8741900: RNCC: D | RNVC: 9

16 Aug 1975

3040-00-944-8250
Fuel Control Output Shaft

009448250
9778BN: RNCC: 3 | RNVC: 2

16 Feb 1966

3040-01-003-6791
Linear Actuating Cylinder Assembly

010036791
740260: RNCC: 3 | RNVC: 9
4711525PC22: RNCC: 5 | RNVC: 1
740990: RNCC: 5 | RNVC: 2
50271160800: RNCC: 5 | RNVC: 9
D-8766-A: RNCC: 5 | RNVC: 9
740262: RNCC: 5 | RNVC: 9

3 May 1975

3040-00-968-8571
Bevel Gearshaft

009688571
W2F23702: RNCC: 3 | RNVC: 2
W2F23702: RNCC: 3 | RNVC: 9
W2F23702: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-991-4150
Control Cam

009914150
470388: RNCC: 3 | RNVC: 2
470388: RNCC: 3 | RNVC: 9

1 Jan 1962

3040-01-011-4920
Bevel Gearshaft

010114920
742372: RNCC: 3 | RNVC: 2
742372: RNCC: 5 | RNVC: 2

23 Oct 1975

3040-00-891-1897
Shouldered Shaft

008911897
2481789: RNCC: 3 | RNVC: 2
2481789: RNCC: 5 | RNVC: 9

13 Jan 1967

3040-00-876-5023
Counterbalance Weight

008765023
422638CL4: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-877-3619
Spur Gearshaft

008773619
6787342: RNCC: 3 | RNVC: 2
6787342: RNCC: 3 | RNVC: 2
6787342: RNCC: 5 | RNVC: 2
6787342: RNCC: 5 | RNVC: 2
6787342: RNCC: 5 | RNVC: 9
6787342: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-888-4139
Counterbalance Weight

008884139
426836CL3: RNCC: 3 | RNVC: 2
426836CL3: RNCC: 5 | RNVC: 2
426836CL3: RNCC: 5 | RNVC: 2
426836CL3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-877-3551
Shouldered Shaft

008773551
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 3 | RNVC: 2
23007322: RNCC: 5 | RNVC: 2
23007322: RNCC: 5 | RNVC: 2
23007322: RNCC: 5 | RNVC: 9
6825238: RNCC: 5 | RNVC: 9
6825238: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-873-4975
Shaft Collar

008734975
6084B: RNCC: 3 | RNVC: 9
873-4975: RNCC: 5 | RNVC: 2
200110AAG857: RNCC: 5 | RNVC: 9

3 Nov 1967

3040-00-913-1023
Brake Shoe

009131023
507208: RNCC: 3 | RNVC: 2
536276: RNCC: 3 | RNVC: 2
536276: RNCC: 5 | RNVC: 9
536276: RNCC: 5 | RNVC: 9
507208: RNCC: 5 | RNVC: 9

29 Jun 1966

3040-00-895-7083
Roller Shaft

008957083
810-2255759 PIECE 38 SHEET 16: RNCC: 3 | RNVC: 2
F61F1375: RNCC: 5 | RNVC: 2
F61F1375: RNCC: 5 | RNVC: 9
810-2255759-38: RNCC: C | RNVC: 1

27 Jan 1967

3040-00-922-5451
Rigid Connecting Link

009225451
10949637: RNCC: 3 | RNVC: 2
10949637: RNCC: 5 | RNVC: 2

19 Apr 1968

3040-00-854-0262
Shouldered Shaft

008540262
2481790: RNCC: 3 | RNVC: 2
APC2481790: RNCC: 5 | RNVC: 2
APC2481790: RNCC: 5 | RNVC: 9

11 Jan 1967

3040-00-888-4140
Counterbalance Weight

008884140
426836CL2: RNCC: 3 | RNVC: 2
426836CL2: RNCC: 5 | RNVC: 2
426836CL2: RNCC: 5 | RNVC: 2
426836CL2: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-00-922-7999
Shaft Collar

009227999
11699387: RNCC: 3 | RNVC: 2

25 Dec 1965

3040-00-888-5185
Counterbalance Weight

008885185
436263CL7: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-759-0799
Linear Actuating Cylinder Assembly

007590799
PDD1015-3: RNCC: 3 | RNVC: 2
PDD1015-3: RNCC: 5 | RNVC: 2
PDD1015-3: RNCC: 5 | RNVC: 2
PDD1015-3: RNCC: 5 | RNVC: 2
PDD1015-3: RNCC: 5 | RNVC: 2
6997-010: RNCC: 5 | RNVC: 9
PDD0758-3: RNCC: 5 | RNVC: 9
PDG0372-3: RNCC: 5 | RNVC: 9
6997: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-837-1880
Counterbalance Weight

008371880
3010117CL4: RNCC: 3 | RNVC: 2
3010117CL4: RNCC: 5 | RNVC: 2

7 Dec 1966

3040-00-840-9581
Shaft Retaining Plate

008409581
10918113: RNCC: 3 | RNVC: 2
2540008409581: RNCC: 5 | RNVC: 9
2540008409581: RNCC: 6 | RNVC: 9

21 Dec 1966

3040-00-769-9367
Remote Control Lever

007699367
2300094-143000.08.0: RNCC: 3 | RNVC: 2
2300094-143000.08.0: RNCC: 5 | RNVC: 2
7699367: RNCC: 5 | RNVC: 2

12 May 1971

3040-00-830-5005
Counterbalance Weight

008305005
393513CL3: RNCC: 3 | RNVC: 2
393513CL3: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-830-5004
Counterbalance Weight

008305004
393513CL4: RNCC: 3 | RNVC: 2
393513CL4: RNCC: D | RNVC: 9

1 Jan 1962

3040-00-733-8912
Remote Control Lever

007338912
8351387: RNCC: 3 | RNVC: 2
3040007338912: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-827-3378
Pawl

008273378
6-50764-1: RNCC: 3 | RNVC: 2
6-50764-1: RNCC: 3 | RNVC: 9
6-50764-1: RNCC: 5 | RNVC: 9

23 Aug 1967

3040-00-670-9320
Linear Actuating Cylinder Assembly

006709320
56B23547-1: RNCC: 3 | RNVC: 2
56B23547-1: RNCC: 3 | RNVC: 9
56B23547-1: RNCC: 5 | RNVC: 2
56B23547-1: RNCC: 5 | RNVC: 9
3040PL0664060: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-605-8818
Linear Actuating Cylinder Assembly

006058818
55D21249: RNCC: 3 | RNVC: 2
55D21249: RNCC: 3 | RNVC: 9
55D21249: RNCC: 5 | RNVC: 2
55D21249: RNCC: 5 | RNVC: 2
5C1750A: RNCC: 5 | RNVC: 2
1C1750A: RNCC: 5 | RNVC: 2
LC1750A: RNCC: 5 | RNVC: 2
50-19108: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-631-2258
Crank Assembly

006312258
9-64334-8: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-593-5024
Flexible Casing Coupling Nut

005935024
09B17: RNCC: 3 | RNVC: 2
09B17: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-611-6187
Remote Control Lever

006116187
7962131: RNCC: 3 | RNVC: 2
3040006116187: RNCC: 5 | RNVC: 9

5 Feb 1975

3040-00-633-0214
Shouldered Shaft

006330214
373164: RNCC: 3 | RNVC: 2
373169: RNCC: 5 | RNVC: 2
6330214: RNCC: 5 | RNVC: 2
373164: RNCC: 5 | RNVC: 9
6330312: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-673-7883
Rigid Connecting Link

006737883
1655970: RNCC: 3 | RNVC: 2
BUWEPSDWG1655970: RNCC: 5 | RNVC: 2
BUWEPSDWG1655970: RNCC: 5 | RNVC: 9
BUWEPSDWG1655970: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-631-2257
Bell Crank

006312257
9-64334-7: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-678-3165
Shouldered Shaft

006783165
7953782: RNCC: 3 | RNVC: 2
3040006783165: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-560-2894
Rigid Connecting Link

005602894
283208: RNCC: 3 | RNVC: 2
283208: RNCC: 3 | RNVC: 9
283208: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-570-3392
Rigid Connecting Link

005703392
340239-7: RNCC: 3 | RNVC: 2
3040PL1608366: RNCC: 6 | RNVC: 9

1 Dec 1974

3040-00-589-9062
Bell Crank

005899062
354648-1: RNCC: 3 | RNVC: 2
354648-1: RNCC: 5 | RNVC: 2
354648-1: RNCC: 5 | RNVC: 2
354648-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-615-8802
Rigid Connecting Link

006158802
8741928: RNCC: 3 | RNVC: 2
3040006158802: RNCC: 5 | RNVC: 9
8741900: RNCC: D | RNVC: 9

15 Feb 1975

3040-00-460-2936
Rigid Connecting Link

004602936
416559-2: RNCC: 3 | RNVC: 2
416559-2: RNCC: 5 | RNVC: 2
416559-2: RNCC: 5 | RNVC: 2

5 Jan 1970

3040-00-544-2144
Manual Control Lever

005442144
344059-5: RNCC: 3 | RNVC: 2
344059-3: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-526-0350
Straight Shaft

005260350
94410-1: RNCC: 3 | RNVC: 2
94410-1: RNCC: 3 | RNVC: 9
94410-1: RNCC: 5 | RNVC: 2
94410-1: RNCC: 5 | RNVC: 9

28 Aug 1974

3040-00-435-5579
Shouldered Shaft

004355579
C5A27971: RNCC: 3 | RNVC: 9
C5A27971: RNCC: 5 | RNVC: 2

19 Mar 1969

3040-00-477-0436
Ball Joint

004770436
F22-27: RNCC: 3 | RNVC: 2
F22-27: RNCC: 5 | RNVC: 2
F22-27: RNCC: 5 | RNVC: 9
2587637-2: RNCC: D | RNVC: 9

11 Jun 1971

3040-00-435-0847
Bevel Gearshaft

004350847
C5A27163: RNCC: 3 | RNVC: 2
C5A27163: RNCC: 5 | RNVC: 9

14 Mar 1969

3040-00-394-5785
Rotating Shaft Eye Bracket

003945785
14-23529-1: RNCC: 3 | RNVC: 2
14-23529-1: RNCC: 3 | RNVC: 9
14-23529-1: RNCC: 5 | RNVC: 9

18 Apr 1974

3040-00-396-5098
Counterbalance Weight

003965098
211146CL7: RNCC: 3 | RNVC: 2
211146CL7: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-402-8328
Linear Actuating Cylinder Assembly Parts Kit

004028328
PK802HLL05: RNCC: 3 | RNVC: 2

1 Jun 1970

3040-00-372-4827
Brake Disc

003724827
566842400: RNCC: 3 | RNVC: 2
8-004-208-00: RNCC: 5 | RNVC: 9
8-004-208: RNCC: 5 | RNVC: 9
6097826-003: RNCC: C | RNVC: 1

12 Mar 1974

3040-00-435-0843
Multiple Gears Gearshaft

004350843
C5A27149: RNCC: 3 | RNVC: 2
C5A27149: RNCC: 3 | RNVC: 9

14 Mar 1969

3040-00-405-0671
Stud Shaft

004050671
420201-1: RNCC: 3 | RNVC: 2

29 Mar 1971

3040-00-403-7001
Shouldered Shaft

004037001
65652-11211-101: RNCC: 3 | RNVC: 2

30 Jul 1969

NSN 3040-00-396-5099 003965099 WEIGHT,COUNTERBALANCE

3040-00-396-5099
Counterbalance Weight

003965099
211146CL8: RNCC: 3 | RNVC: 2
211146CL8: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-316-4334
Linear Actuating Cylinder Cap

003164334
123AMM50007-1: RNCC: 3 | RNVC: 2
123AMM50007-1: RNCC: 5 | RNVC: 2
123AMM50007-1: RNCC: 5 | RNVC: 2
123AMM50007-1: RNCC: 5 | RNVC: 9

11 Nov 1973

3040-00-229-3417
Manual Control Lever

002293417
23053191: RNCC: 3 | RNVC: 2
6878491: RNCC: 5 | RNVC: 9
6878491: RNCC: 5 | RNVC: 9
6856989: RNCC: C | RNVC: 1

23 May 1973

3040-00-252-5452
Straight Shaft

002525452
135B5909-2: RNCC: 3 | RNVC: 2
3040PL0664003: RNCC: 6 | RNVC: 9
135B5909-2: RNCC: C | RNVC: 1

22 Jun 1973

3040-00-307-9792
Crew Door Shaft

003079792
339982: RNCC: 3 | RNVC: 9
307-9792: RNCC: 5 | RNVC: 2
339982: RNCC: 5 | RNVC: 2
339982: RNCC: 5 | RNVC: 9
3040PL0816039: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-00-342-8282
Bell Crank

003428282
60-3321-2: RNCC: 3 | RNVC: 2
60-3321-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-340-9427
Remote Control Lever

003409427
6-83888: RNCC: 3 | RNVC: 2
6-83888: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-213-9188
Rigid Connecting Link

002139188
6-40469-502: RNCC: 3 | RNVC: 2
6-40469-502: RNCC: 3 | RNVC: 9
6-40469-502: RNCC: 5 | RNVC: 2
6-40469-502: RNCC: 5 | RNVC: 9

27 Apr 1973

3040-00-220-2049
Pawl

002202049
8448235: RNCC: 3 | RNVC: 2

29 Jan 1969

3040-00-223-7793
Straight Shaft

002237793
A700069: RNCC: 3 | RNVC: 2
700069: RNCC: C | RNVC: 1

17 May 1973

3040-00-273-1205
Friction Lining

002731205
566586200: RNCC: 3 | RNVC: 2
5-18-6602: RNCC: 5 | RNVC: 9
5-18-6602-00: RNCC: 5 | RNVC: 9

30 Jul 1973

3040-00-340-9450
Remote Control Lever

003409450
60-2711: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-226-2558
Shouldered Shaft Assembly

002262558
10870627: RNCC: 3 | RNVC: 2

3 Jan 1968

3040-00-133-0983
Rotating Shaft Eye Bracket

001330983
10898073: RNCC: 3 | RNVC: 2
2510001330983: RNCC: 5 | RNVC: 9
2510001330983: RNCC: 6 | RNVC: 9

20 Dec 1968

3040-00-152-7105
Bevel Gearshaft

001527105
513512: RNCC: 3 | RNVC: 2

16 Oct 1971

3040-00-171-2308
Manual Control Lever

001712308
123LM10109-501: RNCC: 3 | RNVC: 2
123LM10109-501: RNCC: 5 | RNVC: 2
123LM10109-501: RNCC: 5 | RNVC: 9
123LM10109: RNCC: D | RNVC: 9

27 Aug 1972

3040-00-139-6507
Spur Gearshaft

001396507
9A186: RNCC: 3 | RNVC: 2

18 Aug 1971

3040-00-075-8491
Spur Gearshaft

000758491
490737: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-006-5233
Multiple Gears Gearshaft

000065233
42252E29: RNCC: 3 | RNVC: 2

16 Jul 1972

3040-00-075-5737
Rigid Connecting Link

000755737
2600RJS2: RNCC: 3 | RNVC: 9
108398-001: RNCC: 5 | RNVC: 2
600-RJS-02: RNCC: 5 | RNVC: 2
600RJS2: RNCC: 5 | RNVC: 9
30350-1: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-078-4445
Friction Lining

000784445
H080002-005: RNCC: 3 | RNVC: 2
H080002-003: RNCC: 3 | RNVC: 9
J80001PC3: RNCC: 5 | RNVC: 1
H080002-004: RNCC: 5 | RNVC: 9
H80002: RNCC: 5 | RNVC: 9
3040PL0822952: RNCC: 6 | RNVC: 9
H80002-2: RNCC: C | RNVC: 1

1 Jan 1963

3040-00-015-8546
Nonrotating Shaft Eye Bracket

000158546
6829556: RNCC: 3 | RNVC: 2
6829556: RNCC: 5 | RNVC: 2
6829556MAS: RNCC: 5 | RNVC: 2
6829556: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-006-5232
Spur Gearshaft

000065232
42252E30: RNCC: 3 | RNVC: 2

16 Jul 1972

3040-00-072-8880
Shouldered Shaft

000728880
3-13420-1: RNCC: 3 | RNVC: 2
3-13420-1: RNCC: 3 | RNVC: 9
3-13420-1: RNCC: 5 | RNVC: 9

1 Jan 1960

3040-00-073-0187
Shouldered Shaft

000730187
8432936: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-006-6790
Spur Gearshaft

000066790
42252E31: RNCC: 3 | RNVC: 2

25 Jun 1972

3040-00-001-1682
Rigid Connecting Link

000011682
123L10013-501: RNCC: 3 | RNVC: 9
123L10013: RNCC: 5 | RNVC: 1
123L10013-501: RNCC: 5 | RNVC: 2
123L10013-501: RNCC: 5 | RNVC: 9
123L10013-501: RNCC: C | RNVC: 1
123L10013: RNCC: D | RNVC: 9

24 Sep 1972

3040-22-269-0038
Shouldered Shaft

222690038
90101-37-2691: RNCC: 3 | RNVC: 2

4 Jan 1996

3040-99-109-0084
Spur Gearshaft

991090084
B233218: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-144-7342
Spur Gearshaft

991447342
103565602: RNCC: 3 | RNVC: 2
103565602: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-251-2617
Shouldered Shaft

992512617
75A247012-2001: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-454-9487
Rigid Connecting Link

994549487
PE23062: RNCC: 3 | RNVC: 2

13 Nov 2006

3040-99-603-3082
Rigid Connecting Link

996033082
B278853: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-769-6478
Rigid Connecting Link

997696478
75A326111-1004: RNCC: 3 | RNVC: 2
75A326111-1004: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-797-1542
Rigid Connecting Link

997971542
75A617100-1001: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-877-7829
Linear Actuating Cylinder Assembly

998777829
G406/8032: RNCC: 3 | RNVC: 2

11 Sep 2002

3040-99-337-8409
Rigid Connecting Link

993378409
MBEU200313: RNCC: 3 | RNVC: 2

24 May 2007

3040-99-463-2175
Straight Shaft

994632175
MBEU145552: RNCC: 3 | RNVC: 2
CMBEU145552: RNCC: 5 | RNVC: 2
MBEU145552: RNCC: 8 | RNVC: 2

24 Oct 1992

3040-99-601-8446
Linear Actuating Cylinder

996018446
G416/4654/12/T: RNCC: 3 | RNVC: 2
G416/4654/12/18: RNCC: 5 | RNVC: 2
G416/4654/12 ITEM 18: RNCC: 5 | RNVC: 2

21 Aug 2002

3040-99-423-1767
Rigid Connecting Link

994231767
PE26968: RNCC: 3 | RNVC: 2

27 Jan 2010

3040-99-702-1779
Shaft Collar

997021779
P290-06-1492: RNCC: 3 | RNVC: 2

8 Aug 1996

3040-99-729-7484
Manual Control Lever

997297484
3A063-0376: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-786-0113
Rotating Shaft Eye Bracket

997860113
3A077-0115: RNCC: 3 | RNVC: 2

25 Mar 1988

3040-99-729-7512
Stub Axle

997297512
3A001-1875: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-991-1970
Bevel Gearshaft

999911970
B519366: RNCC: 3 | RNVC: 2

2 May 2013

3040-99-994-9605
Service Kit

999949605
991/00110: RNCC: 3 | RNVC: 2
FJ961353051: RNCC: 6 | RNVC: 9

12 Feb 1996

3040-99-968-5872
Linear Actuating Cylinder Assembly

999685872
1915720: RNCC: 3 | RNVC: 2

17 Sep 2009

3040-99-371-7825
Linear Actuating Cylinder Assembly

993717825
1889087: RNCC: 3 | RNVC: 2

17 Sep 2009

3040-99-327-9304
Multiple Gears Gearshaft

993279304
MBEU145617: RNCC: 3 | RNVC: 2
CMBEU145617: RNCC: 5 | RNVC: 2

24 Oct 1992

3040-99-507-2978
Straight Shaft

995072978
HLD148-244: RNCC: 3 | RNVC: 2

19 Jun 2006

3040-99-589-2249
Shouldered Shaft Assembly

995892249
82404961: RNCC: 3 | RNVC: 2
032IY-019: RNCC: 6 | RNVC: 9

8 Jul 2003

3040-99-594-5508
Link Lever Assembly

995945508
MBEU147798: RNCC: 3 | RNVC: 2
MBEU147798: RNCC: 5 | RNVC: 2
MBEU147798: RNCC: 5 | RNVC: 9

3 Oct 1994

3040-99-666-2715
Manual Control Lever

996662715
2163/14: RNCC: 3 | RNVC: 2

2 Oct 2004

3040-99-690-7578
Linear Actuating Cylinder Assembly

996907578
1888064: RNCC: 3 | RNVC: 2

17 Sep 2009

3040-99-709-0203
Rigid Connecting Link

997090203
MBEU145910: RNCC: 3 | RNVC: 2

3 Oct 1994

3040-99-723-4323
Drive Shaft

997234323
2A066-0535: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-739-1040
Remote Control Lever

997391040
1541-1133: RNCC: 3 | RNVC: 2
1541-1133: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-99-729-7520
Spindle

997297520
3A035-0677: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-801-1845
Universal Joint Yoke

998011845
75A607218-1001: RNCC: 3 | RNVC: 2
75A607218-1001: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-99-219-7005
Linear Actuating Cylinder Piston

992197005
MBEU168821: RNCC: 3 | RNVC: 2

21 May 2007

3040-99-257-9250
Rigid Connecting Link

992579250
75A325554-1003: RNCC: 3 | RNVC: 2
75A325554-1003: RNCC: 5 | RNVC: 2
75A325554-1003: RNCC: 5 | RNVC: 9

13 Jul 1995

3040-99-270-8699
Straight Shaft

992708699
CH2026-0054: RNCC: 3 | RNVC: 2

12 Nov 2013

3040-99-424-1200
Linear Actuating Cylinder Assembly

994241200
1888048: RNCC: 3 | RNVC: 2

17 Sep 2009

3040-99-513-6138
Linear Actuating Cylinder Piston

995136138
MBEU140624: RNCC: 3 | RNVC: 2
MBEU140624: RNCC: 5 | RNVC: 2
B-MBEU140624: RNCC: 5 | RNVC: 2

7 Nov 1992

3040-99-587-5397
Linear Actuating Cylinder Assembly

995875397
1888056: RNCC: 3 | RNVC: 2

17 Sep 2009

3040-99-603-3724
Rigid Connecting Link

996033724
A269919: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-709-4601
Remote Control Lever

997094601
MBEU145912: RNCC: 3 | RNVC: 2
MBEU145912: RNCC: 5 | RNVC: 2
C-MBEU145912: RNCC: 5 | RNVC: 2

7 Nov 1992

3040-99-735-6323
Shouldered Shaft

997356323
Y3J42015B: RNCC: 3 | RNVC: 2
Y3J42015B: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-801-1840
Vehicular Universal Joint Yoke

998011840
75A607214-1001: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-845-2150
Manual Contro Lever

3040-99-125-7390
Worm Shaft

991257390
43324512: RNCC: 3 | RNVC: 2

17 Mar 1992

3040-99-133-7747
Rigid Connecting Link

991337747
PE23001: RNCC: 3 | RNVC: 2

8 Sep 2006

3040-99-147-5500
Straight Shaft

991475500
G413/4613/3: RNCC: 3 | RNVC: 2
G413/4613 ITEM 3: RNCC: 5 | RNVC: 2

26 Feb 2002

3040-99-189-2382
Linear Actuating Cylinder Assembly Parts Kit

991892382
33194D: RNCC: 3 | RNVC: 2
S01695/M ITEM 8: RNCC: 5 | RNVC: 2
S01695/M/8: RNCC: 5 | RNVC: 2

11 Aug 2009

3040-99-398-0625
Linear Actuating Cylinder Piston

993980625
MBEU145577: RNCC: 3 | RNVC: 2

8 Dec 1992

3040-99-729-7469
Flexible Shaft Assembly

997297469
3A066-0367: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-771-5144
Brake Lining Rivet

997715144
1033-1008: RNCC: 3 | RNVC: 2
1033-1008: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-737-6646
Mechanical Drive Housing

997376646
81706675: RNCC: 3 | RNVC: 2
N.200607-2: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-810-1509
Linear Actuating Cylinder Assembly

998101509
G406/8022: RNCC: 3 | RNVC: 2

26 Feb 2002

3040-99-839-4555
Multiple Gears Gearshaft

998394555
B519364: RNCC: 3 | RNVC: 2

2 May 2013

3040-99-950-3774
Rigid Connecting Link

999503774
1781-4025: RNCC: 3 | RNVC: 2
1781-4025: RNCC: 5 | RNVC: 9

14 Nov 1991

3040-99-208-0231
Extension Shaft

992080231
HAL06: RNCC: 3 | RNVC: 2
BSL-HAL06: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-435-6375
Shouldered Shaft

994356375
1760-4004: RNCC: 3 | RNVC: 2

16 Dec 1991

3040-99-613-2733
Linear Actuating Cylinder Assembly

996132733
PE23961: RNCC: 3 | RNVC: 2

19 Dec 2006

3040-99-668-7876
Straight Shaft

996687876
G414/4682/65: RNCC: 3 | RNVC: 2
G414/4682 ITEM 65: RNCC: 5 | RNVC: 2

16 Jul 2004

3040-99-670-4047
Shouldered Shaft

996704047
75A507210-2003: RNCC: 3 | RNVC: 2
75A507210: RNCC: 5 | RNVC: 9

17 Sep 1992

3040-99-834-5139
Nonrotating Shaft Eye Bracket

998345139
B509130: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-109-0750
Straight Shaft

991090750
B217560: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-125-7392
Rigid Connecting Link

991257392
43323637: RNCC: 3 | RNVC: 2

17 Mar 1992

3040-99-109-0607
Straight Shaft

991090607
B176817: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-151-2599
Rigid Connecting Link

991512599
75A325554-1001: RNCC: 3 | RNVC: 2
75A325554-1001: RNCC: 5 | RNVC: 9

13 Jul 1995

3040-99-145-5765
Shouldered Shaft

991455765
616016181: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-269-1505
Linear Actuating Cylinder Assembly

992691505
G406/8027: RNCC: 3 | RNVC: 2

22 Feb 2002

3040-99-398-8777
Rigid Connecting Link

993988777
MBEU148311: RNCC: 3 | RNVC: 2

9 Oct 2000

3040-99-495-6231
Rigid Connecting Link

994956231
MBEU200288: RNCC: 3 | RNVC: 2

24 May 2007

3040-99-563-5677
Shaft.Splined H.P.R

995635677
MBEU140834: RNCC: 3 | RNVC: 2
MBEU140834: RNCC: 5 | RNVC: 2

3 Oct 1994

3040-99-732-4627
Remote Control Lever

997324627
754/1/37192/000: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-781-4102
Shouldered Shaft

997814102
B500099: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-805-9421
Spur Gearshaft

998059421
1732-4018: RNCC: 3 | RNVC: 2
1732-4018: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-99-798-8611
Specia Bracket Link

997988611
75A327429-2001: RNCC: 3 | RNVC: 2
75A327429-2001: RNCC: 5 | RNVC: 2
75A327429-2001: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-796-6433
Rigid Connecting Link

997966433
75A007226-2001: RNCC: 3 | RNVC: 2
75A007226: RNCC: 5 | RNVC: 1

25 Apr 1991

3040-99-144-5172
Rigid Connecting Link

991445172
MBEU813H5: RNCC: 3 | RNVC: 2
0MBEU813H5: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-151-5480
Rigid Connecting Link

991515480
PE26090: RNCC: 3 | RNVC: 2

27 Jan 2010

3040-99-235-4658
Pivot Shaft Assembly

992354658
G414/4682/63: RNCC: 3 | RNVC: 2

2 Apr 2002

3040-99-215-5047
Rigid Connecting Link

992155047
R7940101-D: RNCC: 3 | RNVC: 2
R7940101-D: RNCC: 5 | RNVC: 2
2-320535 D-SA: RNCC: 6 | RNVC: 9

29 Dec 1994

3040-99-152-3192
Shouldered Shaft

991523192
MBEU141900: RNCC: 3 | RNVC: 2
MBEU141900: RNCC: 5 | RNVC: 2

24 Nov 1992

3040-99-269-2625
Rigid Connecting Link

992692625
MBEU200537: RNCC: 3 | RNVC: 2

24 May 2007

3040-99-562-3114
Remote Control Lever

995623114
MBEU140936: RNCC: 3 | RNVC: 2
MBEU140936: RNCC: 5 | RNVC: 2
B-MBEU140936: RNCC: 5 | RNVC: 2

24 Nov 1992

3040-99-567-4230
Hydraulic Control Assembly

995674230
KP00158: RNCC: 3 | RNVC: 2

25 Jul 2007

3040-99-613-8670
Bevel Gearshaft

996138670
B519367: RNCC: 3 | RNVC: 2

15 May 2013

3040-99-721-3621
Centrifu Brake Shoe

997213621
5520-5701: RNCC: 3 | RNVC: 2

15 Aug 2000

3040-99-736-8184
Straight Shaft

997368184
3409525: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-776-5701
Bell Crank

997765701
75A427219-1001: RNCC: 3 | RNVC: 2
75A427219: RNCC: 5 | RNVC: 1

25 Apr 1991

3040-99-801-1857
Universal Join Yoke

998011857
75A607224-1003 ISSUE 1: RNCC: 3 | RNVC: 2
75A607224-1003: RNCC: 5 | RNVC: 2
75A607224-1003 ISSUE 1: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-872-1778
Shouldered Shaft

998721778
G101/5620/7: RNCC: 3 | RNVC: 2
G101/5620: RNCC: 5 | RNVC: 1
G101/5620/4: RNCC: 5 | RNVC: 9

12 Dec 2001

3040-99-991-2187
Right Assem End Cap

3040-99-980-9188
Linear Actuating Cylinder Assembly

999809188
PE23537: RNCC: 3 | RNVC: 2

7 Dec 2011

3040-99-238-2097
Linear Actuating Cylinder Assembly

992382097
1923765: RNCC: 3 | RNVC: 2

17 Sep 2009

3040-99-321-5628
Piston Ring

993215628
MBEU140627: RNCC: 3 | RNVC: 2
MBEU140627: RNCC: 5 | RNVC: 2

3 Oct 1994

3040-99-723-4324
Drive Shaft

997234324
2A058-0379: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-723-4361
Pipe Nipple

997234361
SF21564: RNCC: 3 | RNVC: 2
FL980270002: RNCC: 6 | RNVC: 9

2 Mar 1998

3040-99-741-8444
Brake Band And Lining

997418444
68000243: RNCC: 3 | RNVC: 2
68000243: RNCC: 5 | RNVC: 2

20 Jul 2000

3040-99-769-6477
Rigid Connecting Link

997696477
75A326111-1003: RNCC: 3 | RNVC: 2
75A326111-1003: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-893-0264
Hydraulic Control Assembly

998930264
CS3005: RNCC: 3 | RNVC: 2

23 Jul 2007

3040-98-207-6630
Linear Actuating Cylinder Cap

982076630
105608: RNCC: 3 | RNVC: 2
105608: RNCC: 5 | RNVC: 2

21 Jun 2012

3040-99-109-0605
Straight Shaft

991090605
B176819: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-213-0623
Rigid Connecting Link

992130623
MBEU200290: RNCC: 3 | RNVC: 2

24 May 2007

3040-99-306-2915
Linear Actuating Cylinder Assembly

993062915
BC22134: RNCC: 3 | RNVC: 2
A06834180: RNCC: 5 | RNVC: 2

18 May 1994

3040-99-553-2259
Rigid Connecting Link

995532259
PE13128: RNCC: 3 | RNVC: 2
FH964280028: RNCC: 6 | RNVC: 9

12 Feb 1996

3040-99-535-4379
Shaft Collar

995354379
75A325463-2001: RNCC: 3 | RNVC: 2
75A325463-2001: RNCC: 5 | RNVC: 9

26 Nov 1993

3040-99-509-7323
Linear Actuating Cylinder Assembly

995097323
G406/8028: RNCC: 3 | RNVC: 2

3 Jun 2005

3040-99-606-2038
Shouldered Shaft

996062038
688-22: RNCC: 3 | RNVC: 2
DENG688-22: RNCC: 5 | RNVC: 2
ENG688-22: RNCC: 5 | RNVC: 2
688-22: RNCC: 5 | RNVC: 9
DENG688-22: RNCC: 5 | RNVC: 9
ENG688-22: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-99-767-0613
Service Kit

997670613
991/00103: RNCC: 3 | RNVC: 2
FJ961353055: RNCC: 6 | RNVC: 9

12 Feb 1996

3040-99-862-2795
Linear Actuating Cylinder Assembly

998622795
LT27333: RNCC: 3 | RNVC: 2

4 Nov 2004

3040-99-859-1835
Brake Pad Adjuster

998591835
P290-06-1646: RNCC: 3 | RNVC: 2
P290-06-1646: RNCC: 5 | RNVC: 2

21 Aug 1996

3040-99-930-6011
Rigid Connecting Link

999306011
MBEU145944: RNCC: 3 | RNVC: 2
BMBEU145944: RNCC: 5 | RNVC: 2
MBEU145944: RNCC: 8 | RNVC: 2

24 Oct 1992

3040-99-801-1846
Universal Join Yoke

998011846
75A607224-1001: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-273-0682
Ball Joint

3040-99-845-6531
Shouldered Shaft

3040-99-388-6361
Rigid Connecting Link

993886361
MBEU200479: RNCC: 3 | RNVC: 2

24 May 2007

3040-99-555-2785
Rigid Connecting Link

995552785
MBEU200579: RNCC: 3 | RNVC: 2

24 May 2007

3040-99-701-4469
Linear Actuating Cylinder Piston

997014469
MBEU146227: RNCC: 3 | RNVC: 2
CMBEU146227: RNCC: 5 | RNVC: 2
MBEU146227: RNCC: 8 | RNVC: 2

24 Oct 1992

3040-99-660-4931
Manual Control Lever

996604931
MBEU147814: RNCC: 3 | RNVC: 2
MBEU147814: RNCC: 5 | RNVC: 2
B-MBEU147814: RNCC: 5 | RNVC: 2
MBEU147814: RNCC: 8 | RNVC: 2

24 Nov 1992

3040-99-818-8974
Linear Actuating Cylinder Assembly

998188974
PE21787: RNCC: 3 | RNVC: 2

16 Apr 2012

3040-99-207-8065
Straight Shaft

992078065
MEXEA26915: RNCC: 3 | RNVC: 2
870-50279: RNCC: 5 | RNVC: 2
A26915: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-99-452-3359
Rigid Connecting Link

994523359
PE13126: RNCC: 3 | RNVC: 2
FH964280151: RNCC: 6 | RNVC: 9

16 Apr 1996

3040-99-517-1470
Pawl

995171470
43323173: RNCC: 3 | RNVC: 2

17 Mar 1992

3040-99-593-3067
Straight Shaft

995933067
CH2031A0500: RNCC: 3 | RNVC: 2

18 May 2007

3040-99-606-5640
Bevel Gearshaft

996065640
B281750: RNCC: 3 | RNVC: 2
B517288: RNCC: 5 | RNVC: 9

25 Apr 1991

3040-99-679-8566
Rigid Connecting Link

996798566
MBEU202182: RNCC: 3 | RNVC: 2

20 Jun 2007

3040-99-603-3073
Rigid Connecting Link

996033073
B278852: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-723-4121
Crank Bell

997234121
2A008-0533: RNCC: 3 | RNVC: 2

25 Apr 1991

3040-99-729-7471
Flexible Shaft Assembly

997297471
3A058-0108: RNCC: 3 | RNVC: 2
3A058-0108: RNCC: 5 | RNVC: 2

2 Oct 1986

3040-99-748-4367
Roller Pin Assembly

997484367
HLD148-468: RNCC: 3 | RNVC: 2

15 Jun 2006

3040-99-876-9703
Helical Gear And Shaft Assembly

998769703
LDK-092-10038: RNCC: 3 | RNVC: 2

17 Nov 2011

3040-99-889-8360
Rigid Connecting Link

998898360
MBEU200311: RNCC: 3 | RNVC: 2

24 May 2007

3040-99-932-7673
Linear Actuating Cylinder Assembly

999327673
SK1977: RNCC: 3 | RNVC: 2
S01695/M ITEM 4: RNCC: 5 | RNVC: 2
S01695/M/4: RNCC: 5 | RNVC: 2
SK1977/S: RNCC: 5 | RNVC: 2

11 Aug 2009

3040-01-614-9798
Counterbalance Weight

016149798
7-5R2430112-015: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-614-9965
Housing Adapter

016149965
3855987: RNCC: 3 | RNVC: 2
3855987: RNCC: 5 | RNVC: 9

20 Dec 2012

3040-01-615-6475
Pivot Shaft Assembly

016156475
200126-01: RNCC: 3 | RNVC: 2

18 Jan 2013

3040-01-608-6285
Pneumatic Accumulator

016086285
AB-1500: RNCC: 3 | RNVC: 2

5 Jul 2012

3040-01-616-3709
Rigid Connecting Link

016163709
A3102V3454: RNCC: 3 | RNVC: 2
TDA A 3102X3454: RNCC: 5 | RNVC: 2

12 Feb 2013

3040-01-617-0388
Mechanical Drive Housing

016170388
02584686: RNCC: 3 | RNVC: 2

7 Mar 2013

3040-01-617-2490
Linear Actuating Cylinder Assembly

016172490
CRC-2522: RNCC: 3 | RNVC: 2
CRC-2522: RNCC: 5 | RNVC: 2
F149918 REV A: RNCC: D | RNVC: 9

18 Mar 2013

3040-01-610-0113
Housing Adapter

016100113
1978939: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-610-1098
Shaft Supp Liner

016101098
14005250: RNCC: 3 | RNVC: 2
172-20768-24: RNCC: 3 | RNVC: 9
172-20768-24: RNCC: 5 | RNVC: 9

9 Aug 2012

3040-01-612-2615
Extension Shaft

016122615
5188706: RNCC: 3 | RNVC: 2

5 Oct 2012

3040-01-611-8616
Shouldered Shaft Assembly

016118616
GS-5086-1: RNCC: 3 | RNVC: 2

26 Sep 2012

3040-01-612-3525
Linear Actuating Cylinder Assembly

016123525
MCTI-034-0777-10: RNCC: 3 | RNVC: 9

10 Oct 2012

3040-01-612-4211
Rigid Connecting Link

016124211
26142000055: RNCC: 3 | RNVC: 2
26142000055: RNCC: 3 | RNVC: 9

11 Oct 2012

3040-01-612-4463
Straight Shaft

016124463
332/D9439: RNCC: 3 | RNVC: 2

11 Oct 2012

3040-01-614-9701
Shouldered Shaft

016149701
41013384: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-614-0044
Shouldered Shaft

016140044
W6NSB30500: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-613-4743
Rigid Connecting Link

016134743
881210T02: RNCC: 3 | RNVC: 2

8 Nov 2012

3040-01-614-3617
Rigid Connecting Link

016143617
74A411717-1001: RNCC: 3 | RNVC: 2
74A411717-1001: RNCC: 5 | RNVC: 2

3 Dec 2012

3040-01-612-3789
Manual Control Lever

016123789
4026665: RNCC: 3 | RNVC: 2
4026665: RNCC: 5 | RNVC: 9

10 Oct 2012

3040-01-618-8468
Control Cable Assembly

016188468
J5090-0010: RNCC: 3 | RNVC: 2

8 May 2013

3040-01-620-0812
Shouldered Shaft

016200812
43042-00288-2: RNCC: 3 | RNVC: 2

1 Jul 2013

3040-01-621-3826
Linear Actuating Cylinder Assembly

016213826
WK-871-126 ASSY A: RNCC: 3 | RNVC: 2

5 Sep 2013

3040-01-621-7723
Linear Actuating Cylinder Piston

016217723
065091: RNCC: 3 | RNVC: 2

17 Sep 2013

3040-01-622-9633
Straight Shaft

016229633
4705608: RNCC: 3 | RNVC: 2
4705608: RNCC: 5 | RNVC: 2

28 Oct 2013

3040-01-622-8684
Mstr Hyd Brake Cyl

016228684
34762: RNCC: 3 | RNVC: 9
34762: RNCC: 5 | RNVC: 2

23 Oct 2013

3040-01-623-4173
Disk Brake Shoe

016234173
BRDMPAD-13: RNCC: 3 | RNVC: 2

13 Nov 2013

3040-01-624-9107
Rigid Connecting Link

016249107
123CM90602-5: RNCC: 3 | RNVC: 2
123CM90602-5: RNCC: 5 | RNVC: 9

17 Jan 2014

3040-01-625-5794
Linear Actuating Cylinder Assembly

016255794
1PSR00000702: RNCC: 3 | RNVC: 2
4003583: RNCC: 5 | RNVC: 2
WD490120A0: RNCC: 5 | RNVC: 9
4003583: RNCC: 7 | RNVC: 9

7 Feb 2014

3040-01-626-0747
Housing Adapter

016260747
4014927: RNCC: 3 | RNVC: 2
4014927: RNCC: 5 | RNVC: 9

26 Feb 2014

3040-01-631-0534
Body Hub

016310534
17A4582P09: RNCC: 3 | RNVC: 2
17A4582P09: RNCC: 5 | RNVC: 9

27 Aug 2014

3040-01-630-4282
Shouldered Shaft

016304282
45M-759-1A: RNCC: 3 | RNVC: 2
EACD-824MF1-3W-HB-ITEM 24: RNCC: 5 | RNVC: 2

4 Aug 2014

3040-01-642-4348
Shouldered Shaft

016424348
845-7526489-2A-06-B-2N-6-008: RNCC: 3 | RNVC: 2
845-7526489: RNCC: D | RNVC: 9

25 Feb 2015

3040-01-642-7910
Linear Actuating Cylinder Assembly

016427910
BB298891A0: RNCC: 3 | RNVC: 2
BB298891: RNCC: 5 | RNVC: 9
BB298891AA: RNCC: D | RNVC: 9

10 Mar 2015

3040-01-644-1365
Shouldered Shaft

016441365
845-7526489-2B-07-A-3-N-E-008: RNCC: 3 | RNVC: 2

22 Apr 2015

3040-01-645-2392
Spline Adapter

016452392
3598-070: RNCC: 3 | RNVC: 2

9 Jun 2015

3040-01-645-8235
Mechanical Drive Housing

016458235
100554A1: RNCC: 3 | RNVC: 2

30 Jun 2015

3040-01-647-1787
Linear Actuating Cylinder Piston Rod

016471787
EP-0021211: RNCC: 3 | RNVC: 2

14 Aug 2015

3040-01-647-2975
Linear Actuating Cylinder Assembly

016472975
B22528: RNCC: 3 | RNVC: 2

17 Aug 2015

3040-01-647-7101
Straight Shaft

016477101
3687312: RNCC: 3 | RNVC: 2

29 Aug 2015

3040-01-648-1660
Grease Cap

016481660
7018SUPCAP-60106: RNCC: 3 | RNVC: 2
CAP-60106: RNCC: 5 | RNVC: 2
PL-999F0934FIND47: RNCC: C | RNVC: 1

16 Sep 2015

3040-01-649-7374
Rigid Connecting Link

016497374
12580280-1: RNCC: 3 | RNVC: 2
12580280: RNCC: D | RNVC: 9

9 Nov 2015

3040-01-650-4441
Shouldered Shaft

016504441
13055584: RNCC: 3 | RNVC: 2

3 Dec 2015

3040-01-650-6538
Shouldered Shaft

016506538
4212759: RNCC: 1 | RNVC: 2
65330001: RNCC: 3 | RNVC: 2

14 Dec 2015

3040-01-650-3107
Linear Actuating Cylinder Assembly

016503107
333/E3430: RNCC: 3 | RNVC: 2
333/E3430: RNCC: 5 | RNVC: 2

27 Nov 2015

3040-01-651-6479
Control Cam

016516479
38004ZG: RNCC: 3 | RNVC: 2
206503 ITEM NO 1-11: RNCC: C | RNVC: 1

25 Jan 2016

3040-01-653-0838
Linear Actuating Cylinder Piston Rod

016530838
EP-0021732: RNCC: 3 | RNVC: 2

10 Mar 2016

3040-01-653-1252
Linear Actuating Cylinder Piston Rod

016531252
EP-0021946: RNCC: 3 | RNVC: 2

11 Mar 2016

3040-01-653-3171
Pneumatic Actuator Cylinder Housing

016533171
EP-0021958: RNCC: 3 | RNVC: 2

18 Mar 2016

3040-01-654-1035
Shouldered Shaft

016541035
3587488: RNCC: 3 | RNVC: 2

18 Apr 2016

3040-01-653-7144
Piston Ring

016537144
509275-2073: RNCC: 3 | RNVC: 2
509275-2073: RNCC: 3 | RNVC: 2

4 Apr 2016

3040-01-653-7137
Planetary Gears Carrier

016537137
510257-021: RNCC: 3 | RNVC: 2
510257-021: RNCC: 3 | RNVC: 2

4 Apr 2016

3040-01-653-4453
Shaft Splined Kc 46

016534453
729861: RNCC: 3 | RNVC: 1

23 Mar 2016

3040-01-654-5540
Straight Shaft Assembly

016545540
256T5710-117: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-654-5550
Straight Shaft Assembly

016545550
256T5710-129: RNCC: 3 | RNVC: 1

2 May 2016

3040-01-655-3102
Breather

016553102
AB-1000-3-M: RNCC: 3 | RNVC: 2
AB-1000-3 M3: RNCC: 3 | RNVC: 9

24 May 2016

3040-01-655-6604
Shaft Collar

016556604
125329AM-74: RNCC: 3 | RNVC: 1

4 Jun 2016

3040-01-654-7464
Shouldered Shaft

016547464
12592-26-A-801: RNCC: 3 | RNVC: 2
A-801-12592-26: RNCC: 5 | RNVC: 1
805-12348ITEM4: RNCC: C | RNVC: 1

9 May 2016

3040-01-656-0577
Remote Control Lever

016560577
1592150W: RNCC: 3 | RNVC: 2

15 Jun 2016

3040-01-656-4673
Differential Gear Unit

016564673
6690M/3-442-000: RNCC: 3 | RNVC: 2
6690-3-442-000: RNCC: 5 | RNVC: 9
6600 PL REV L FIND NO.11: RNCC: D | RNVC: 9

5 Jul 2016

3040-01-656-6293
Cylinder Support

016566293
ZF1296312042: RNCC: 3 | RNVC: 9
ZF1296312042: RNCC: 5 | RNVC: 2
1296.312.042: RNCC: 5 | RNVC: 9

12 Jul 2016

3040-01-656-9784
Linear Actuating Cylinder

016569784
EP-0021831: RNCC: 3 | RNVC: 2

26 Jul 2016

3040-01-659-3724
Nonaircraft Mechanical Actuator

016593724
6250-101: RNCC: 3 | RNVC: 2
6250-101: RNCC: 5 | RNVC: 2

22 Nov 2016

3040-01-660-2769
Push-Pull Control Assembly

016602769
68314: RNCC: 3 | RNVC: 2

13 Jan 2017

3040-01-661-3244
Straight Shaft

016613244
5122105-017-5: RNCC: 3 | RNVC: 2

27 Feb 2017

3040-01-662-1131
Nonaircraft Mechanical Actuator

016621131
S753300076-02: RNCC: 3 | RNVC: 2

27 Mar 2017

3040-01-663-1920
Belt-Chain Tension Adjusting Device

016631920
IDL-0010: RNCC: 3 | RNVC: 2
38131: RNCC: 5 | RNVC: 9
HBPAC-ASY-0003 ITEM 14: RNCC: D | RNVC: 9

1 May 2017

3040-01-666-9845
Straight Shaft

016669845
449-040-075-105: RNCC: 3 | RNVC: 2

28 Sep 2017

3040-01-667-6875
Spur Gearshaft

016676875
14001339: RNCC: 3 | RNVC: 2

26 Oct 2017

3040-01-683-1371
Double Rod Cylinder

016831371
SEF6466: RNCC: 3 | RNVC: 2
SEF6466: RNCC: 5 | RNVC: 2

10 Sep 2019

3040-01-687-1188
Linear Actuating Cylinder Piston

016871188
R5-508-16-HA046AA: RNCC: 3 | RNVC: 2
DWG-1Q8901-0010-01A REVD,IETM 6A: RNCC: D | RNVC: 9

19 Mar 2020

3040-01-687-2858
Linear Actuating Cylinder Assembly

016872858
RAC-306: RNCC: 3 | RNVC: 2
RAC-306: RNCC: 3 | RNVC: 9

26 Mar 2020

3040-01-687-8661
Manual Control Lever

016878661
JBIPR-209: RNCC: 3 | RNVC: 9
PR-209: RNCC: 5 | RNVC: 2

22 Apr 2020

3040-01-688-7458
Pawl

016887458
8198945: RNCC: 3 | RNVC: 2
8198945: RNCC: 5 | RNVC: 2

26 May 2020

3040-01-689-3144
Actuator Rod

016893144
4952361-68: RNCC: 3 | RNVC: 2
4952447/SHEET 2: RNCC: 5 | RNVC: 1

15 Jun 2020

3040-12-305-2617
Grease Cap

123052617
6.463-020.0: RNCC: 3 | RNVC: 2
6-463-020: RNCC: 5 | RNVC: 9
6.463-020: RNCC: 5 | RNVC: 9
F300 0T 001 4242: RNCC: 6 | RNVC: 9

15 Oct 1985

3040-12-345-9318
Ball Joint

123459318
160.33.0001: RNCC: 3 | RNVC: 2

19 May 1998

3040-01-669-6269
Rigid Connecting Link

016696269
BB-8002407-01: RNCC: 3 | RNVC: 2

17 Jan 2018

3040-01-669-7131
Worm Shaft

016697131
BB-8002475-1: RNCC: 3 | RNVC: 2

18 Jan 2018

3040-01-670-6820
Control Cam

016706820
904215-01: RNCC: 3 | RNVC: 2

1 Mar 2018

3040-12-356-3475
Bell Crank

123563475
027500402: RNCC: 3 | RNVC: 2

18 Feb 2002

3040-12-356-3618
Rigid Connecting Link

123563618
027017601: RNCC: 3 | RNVC: 2

19 Feb 2002

3040-12-357-7883
Linear Actuating Cylinder Assembly

123577883
904060538: RNCC: 3 | RNVC: 2

24 Jul 2002

3040-12-370-7107
Push-Pull Control Assembly

123707107
304262-003-120: RNCC: 3 | RNVC: 2

12 Dec 2006

3040-12-384-5768
Linear Actuating Cylinder Assembly

123845768
X51214400001: RNCC: 3 | RNVC: 2

9 Mar 2011

3040-13-120-5371
Shouldered Axle

131205371
3632451530: RNCC: 3 | RNVC: 2

13 Feb 2009

3040-01-672-8152
Linear Actuating Cylinder Cap

016728152
ACC71720D45: RNCC: 3 | RNVC: 2
AEC71720 ITEM 29: RNCC: C | RNVC: 1
AEC71720: RNCC: D | RNVC: 9

17 May 2018

3040-01-678-4117
Shouldered Shaft Assembly

016784117
4381044: RNCC: 3 | RNVC: 2
N7295: RNCC: 5 | RNVC: 9

5 Feb 2019

3040-01-678-5980
Straight Shaft

016785980
11-PTR-9RBU: RNCC: 3 | RNVC: 9
11-PTR-9RBU: RNCC: C | RNVC: 1

14 Feb 2019

3040-14-490-1380
Control Cam

144901380
034-59050: RNCC: 3 | RNVC: 9
S1-ML055-A ITEM POS8: RNCC: 5 | RNVC: 9

17 Sep 1997

3040-15-068-5663
Shaft Straight

150685663
75379F01: RNCC: 3 | RNVC: 2
75379F01: RNCC: 5 | RNVC: 2

10 Apr 1986

3040-21-878-7291
Special Shaft

218787291
10501059: RNCC: 3 | RNVC: 2
24017300-16: RNCC: 3 | RNVC: 2

28 Feb 1978

3040-21-914-2322
Shaft Collar

3040-21-910-1892
Mechanical Drive Housing

219101892
10501169: RNCC: 3 | RNVC: 2
2402-7610-00: RNCC: 5 | RNVC: 2

15 Sep 1994

3040-21-914-2347
Mechanical Drive Housing

219142347
10555940: RNCC: 3 | RNVC: 2

30 Jul 1997

3040-21-920-5026
Linear Actuating Cylinder Assembly

31 Jan 2000

3040-21-920-2793
Linear Actuating Cylinder Assembly Parts Kit

20 Aug 1999

3040-22-269-0760
Shouldered Shaft

222690760
191467124: RNCC: 3 | RNVC: 2
PL 27.115 POS210/524: RNCC: 5 | RNVC: 2

7 May 1996

3040-01-609-9947
Rigid Connecting Link

016099947
803-6397268 REV-PC NO. 120: RNCC: 3 | RNVC: 2
6397268: RNCC: D | RNVC: 9

7 Aug 2012

3040-01-610-4624
Weldment

016104624
9302102: RNCC: 3 | RNVC: 2

17 Aug 2012

3040-01-610-7459
Nonaircraft Mechanical Actuator

016107459
646266: RNCC: 3 | RNVC: 2

28 Aug 2012

3040-01-617-5473
Mechanical Drive Housing

016175473
JGV3830: RNCC: 3 | RNVC: 2

26 Mar 2013

3040-01-617-6941
Hub Clamp

016176941
AX0772-32-SP: RNCC: 3 | RNVC: 2
LN0000316: RNCC: C | RNVC: 1

1 Apr 2013

3040-01-696-6710
Piston Ring

016966710
F11.43455-0024: RNCC: 3 | RNVC: 2

10 Aug 2021

3040-12-324-8076
Flexible Drive Shaft

123248076
6.431-032.0: RNCC: 3 | RNVC: 2
6.431-032: RNCC: 5 | RNVC: 9

25 Mar 1991

3040-20-010-4309
A Cylinder Assembly

3040-58-000-8690
Brake Sho Parts Kit

3040-20-009-1675

3040-20-010-4258
Straight Shaft

3040-01-615-4078
Belt-Chain Tension Adjusting Device

016154078
70-89913: RNCC: 3 | RNVC: 2
136979: RNCC: 5 | RNVC: 2

10 Jan 2013

3040-01-615-7112
Housing Adapter

016157112
MTM-10116: RNCC: 3 | RNVC: 2

22 Jan 2013

3040-01-609-9797
Spider Assy

016099797
391407-3-JP5: RNCC: 3 | RNVC: 2
MIL-R-15917-IV-BR-MILGP IT NO 20: RNCC: 5 | RNVC: 2

7 Aug 2012

3040-01-617-4990
Breather

016174990
03246445: RNCC: 3 | RNVC: 2

25 Mar 2013

3040-01-618-3217
Shaft Collar

016183217
102425: RNCC: 3 | RNVC: 2

19 Apr 2013

3040-01-612-4042
Shouldered Shaft

016124042
4026652: RNCC: 3 | RNVC: 2
4026652: RNCC: 5 | RNVC: 9

10 Oct 2012

3040-01-612-5291
Manual Control Lever

016125291
TAHL2.250-12: RNCC: 3 | RNVC: 2

13 Oct 2012

3040-01-622-2635
Hydraulic Accumulator Cylinder

016222635
061871: RNCC: 3 | RNVC: 2

2 Oct 2013

3040-01-615-0279
Control Cam

016150279
M4304-06: RNCC: 3 | RNVC: 2
M4304 PC NO 6: RNCC: 5 | RNVC: 1

21 Dec 2012

3040-01-615-1277
Counterbalance Weight

016151277
7-5R2430112-017: RNCC: 3 | RNVC: 2

31 Dec 2012

3040-01-608-7556
Rotary Actuating Cylinder Assembly

016087556
347/20623: RNCC: 3 | RNVC: 2

10 Jul 2012

3040-01-609-1356
Flexible Drive Shaft

016091356
6070083: RNCC: 3 | RNVC: 2

17 Jul 2012

3040-01-617-1521
Manual Control Lever

016171521
WAF4: RNCC: 3 | RNVC: 2
WAF4: RNCC: 5 | RNVC: 2

13 Mar 2013

3040-01-610-5297
Aero-Caster

016105297
23541: RNCC: 3 | RNVC: 2

21 Aug 2012

3040-01-610-0110
Grease Cap

016100110
1859087: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-618-7515
Pad W Rtd

016187515
380402-002: RNCC: 3 | RNVC: 2

3 May 2013

3040-01-610-0728
Grease Cap

016100728
1978828: RNCC: 3 | RNVC: 2

9 Aug 2012

3040-01-618-9263
Rigid Connecting Link

016189263
MC-012021-01: RNCC: 3 | RNVC: 2

10 May 2013

3040-01-611-4457
Ball Joint

016114457
458/20810: RNCC: 3 | RNVC: 2

14 Sep 2012

3040-01-620-2825
Krankkart 24V 18L

016202825
STMIL0022: RNCC: 3 | RNVC: 2

16 Jul 2013

3040-01-621-6066
Rigid Connecting Link

016216066
70400-01250-055: RNCC: 1 | RNVC: 2
2072-1: RNCC: 3 | RNVC: 2
3040PL1941494: RNCC: 6 | RNVC: 9

12 Sep 2013

3040-01-612-7501
Linear Actuating Cylinder Cap

016127501
8-B9092: RNCC: 3 | RNVC: 2

19 Oct 2012

3040-01-613-4472
Manual Control Lever

016134472
12545861: RNCC: 3 | RNVC: 2

7 Nov 2012

3040-01-613-9777
Brake Disc

016139777
TCR426325430: RNCC: 3 | RNVC: 2

21 Nov 2012

3040-01-614-6612
Extension Shaft

016146612
4D09175-019: RNCC: 3 | RNVC: 2

12 Dec 2012

3040-01-614-7055
Remote Control Lever

016147055
6D69470H07: RNCC: 3 | RNVC: 2
6D69470-7: RNCC: 5 | RNVC: 9

12 Dec 2012

3040-01-624-1821
Rotating Shaft Eye Bracket

016241821
1028-A3: RNCC: 3 | RNVC: 2

18 Dec 2013

3040-01-625-7284
Straight Shaft

016257284
3977522: RNCC: 3 | RNVC: 2
3977522: RNCC: 5 | RNVC: 9

12 Feb 2014

3040-01-626-5447
Linear Actuating Cylinder Assembly

016265447
L15S0225AN118D: RNCC: 3 | RNVC: 9
20933DJ001 REV G FIND NO. 70: RNCC: 5 | RNVC: 2
J184675: RNCC: 5 | RNVC: 2
L15S0225AN11D8: RNCC: 5 | RNVC: 9
BM-2069: RNCC: 5 | RNVC: 9
1D-1336-PL: RNCC: D | RNVC: 9

13 Mar 2014

3040-01-626-7856
Multiple Gears Gearshaft

016267856
14002187: RNCC: 3 | RNVC: 2
14002187: RNCC: 3 | RNVC: 9

20 Mar 2014

3040-01-627-5581
Sliding Pad

016275581
PG-5029-00: RNCC: 3 | RNVC: 2

17 Apr 2014

3040-01-626-9400
Linear Actuating Cylinder Assembly

016269400
SUB-GAS SHOCK: RNCC: 3 | RNVC: 2

26 Mar 2014

3040-01-631-8149
Counterbalance Weight

016318149
8475531: RNCC: 3 | RNVC: 2
8595531: RNCC: 5 | RNVC: 9

26 Sep 2014

3040-01-633-6689
Shouldered Shaft

016336689
13055111: RNCC: 3 | RNVC: 2

28 Nov 2014

3040-01-642-2804
Mechanically Actuated Spindle

016422804
D-WK-879-92-9: RNCC: 3 | RNVC: 2
D-WK-879-92 REV H PC# 9: RNCC: C | RNVC: 1

19 Feb 2015

3040-01-643-0318
Control Cam

016430318
149B2016-2: RNCC: 3 | RNVC: 2

17 Mar 2015

3040-01-644-6086
Flexible Shaft Assembly

016446086
VCFX-1300-84: RNCC: 3 | RNVC: 2

13 May 2015

3040-01-644-3693
Clevis Hook

016443693
F167046: RNCC: 3 | RNVC: 2
F167039 REV A ITEM NO. 5: RNCC: C | RNVC: 1

1 May 2015

3040-01-646-0516
Shaft Collar

016460516
8A100: RNCC: 3 | RNVC: 2

10 Jul 2015

3040-01-647-0405
Rigid Connecting Link

016470405
W2T409804: RNCC: 3 | RNVC: 2

10 Aug 2015

3040-01-648-5131
Control Cam

016485131
153C6875P1: RNCC: 3 | RNVC: 2
153C6875: RNCC: D | RNVC: 9

28 Sep 2015

3040-01-649-1165
Rigid Connecting Link

016491165
311T4735-4: RNCC: 3 | RNVC: 1

19 Oct 2015

3040-01-650-3436
Rigid Connecting Link

016503436
12580280-3: RNCC: 3 | RNVC: 2
12580280: RNCC: D | RNVC: 9

30 Nov 2015

3040-01-651-0391
Nonaircraft Mechanical Actuator

016510391
EB6.1.SYD: RNCC: 3 | RNVC: 2
4164811: RNCC: 7 | RNVC: 2

30 Dec 2015

3040-01-653-3881
Linear Actuating Cylinder

016533881
EP-0021835: RNCC: 3 | RNVC: 2

22 Mar 2016

3040-01-654-4207
Straight Shaft Assembly

016544207
256T5710-505: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-654-4245
Straight Shaft Assembly

016544245
256T5710-133: RNCC: 3 | RNVC: 1

27 Apr 2016

3040-01-655-1950
Spur Gearshaft

016551950
41657T: RNCC: 3 | RNVC: 2

20 May 2016

3040-01-657-2348
Rigid Connecting Link

016572348
4F61085-103A: RNCC: 3 | RNVC: 2

4 Aug 2016

3040-01-657-2424
Control Cable Assembly

016572424
CC34310: RNCC: 3 | RNVC: 2

4 Aug 2016

3040-01-659-5853
Linear Actuating Cylinder

016595853
PA12652913: RNCC: 3 | RNVC: 2
PA12652913: RNCC: 3 | RNVC: 9

5 Dec 2016

3040-01-660-2784
Transmission Fluid Cooler

016602784
FC18158: RNCC: 3 | RNVC: 2
FC18158: RNCC: 5 | RNVC: 2

13 Jan 2017

3040-01-662-1023
Spur Gearshaft

016621023
4977246-4: RNCC: 3 | RNVC: 2

27 Mar 2017

3040-01-663-1403
Straight Shaft Assembly

016631403
12581485: RNCC: 3 | RNVC: 2

27 Apr 2017

3040-01-665-6673
Worm Shaft

016656673
5400/8-999-000: RNCC: 3 | RNVC: 2
0511 PL REV T FIND NO. 32: RNCC: C | RNVC: 1

8 Aug 2017

3040-01-668-6709
Mechanical Drive Housing

016686709
7662491: RNCC: 3 | RNVC: 2
04080432: RNCC: 5 | RNVC: 2
7662491: RNCC: 5 | RNVC: 2
SW325-AC-IPB-010 FIG/INDEX 36-22: RNCC: C | RNVC: 1

1 Dec 2017

3040-01-669-3379
Shouldered Shaft

016693379
882T2700102-003: RNCC: 3 | RNVC: 2

5 Jan 2018

3040-01-670-2263
Rigid Connecting Link

016702263
12581897: RNCC: 3 | RNVC: 2

12 Feb 2018

3040-01-669-7355
Shouldered Shaft

016697355
BB-8002563-1: RNCC: 3 | RNVC: 2

19 Jan 2018

3040-01-674-2224
Nonaircraft Mechanical Actuator

016742224
40106: RNCC: 3 | RNVC: 2
40106: RNCC: 5 | RNVC: 9

17 Jul 2018

3040-01-674-2683
Spur Gearshaft

016742683
1712610: RNCC: 3 | RNVC: 2
1712610: RNCC: 5 | RNVC: 2

19 Jul 2018

3040-01-676-9786
Shaft Idler

016769786
GS-5251-4: RNCC: 3 | RNVC: 2
4367632: RNCC: 7 | RNVC: 2

20 Nov 2018

3040-01-682-4768
Rigid Connecting Link

016824768
74A671314-2001: RNCC: 3 | RNVC: 2
74A671314: RNCC: D | RNVC: 9

8 Aug 2019

3040-01-688-8108
Shouldered Shaft

016888108
810201-4: RNCC: 3 | RNVC: 2

27 May 2020

3040-01-689-0359
Power Transmission Components Boot

016890359
1125 BOOT: RNCC: 3 | RNVC: 2

3 Jun 2020

3040-01-689-0441
Flexible Shaft Assembly

016890441
22001-100X7FT6IN: RNCC: 3 | RNVC: 2
22001-100X90IN: RNCC: 5 | RNVC: 2
22001: RNCC: D | RNVC: 9

3 Jun 2020

3040-01-693-7902
Spline Adapter

016937902
AKS4T-420-165: RNCC: 3 | RNVC: 2

5 Mar 2021

3040-01-694-7425
Linear Actuating Cylinder Piston

016947425
300-40507-2: RNCC: 3 | RNVC: 2

21 Apr 2021

3040-01-696-4820
Mechanically Actuated Spindle

016964820
2059-3429-000: RNCC: 3 | RNVC: 2

29 Jul 2021

3040-12-357-7873
Remote Control Lever

123577873
867011909: RNCC: 3 | RNVC: 2

24 Jul 2002

3040-12-363-7972
Straight Shaft

123637972
04203318: RNCC: 3 | RNVC: 2

24 Jul 2004

3040-13-118-8995
Shouldered Axle

131188995
3632321510: RNCC: 3 | RNVC: 2

3 Jun 2004

3040-12-369-3076
Manual Control Lever

123693076
867011913: RNCC: 3 | RNVC: 2

20 Jun 2006

3040-14-552-9385
Body Hub

145529385
44040461: RNCC: 3 | RNVC: 2

14 Feb 2007

3040-14-553-5095
Pawl

145535095
4310668: RNCC: 3 | RNVC: 2

11 Apr 2007

3040-15-121-3360
Shouldered Shaft

151213360
149022 FIND NO.27: RNCC: 3 | RNVC: 2
149166: RNCC: 3 | RNVC: 2
21490166: RNCC: 3 | RNVC: 2

7 Nov 1995

3040-15-068-5660
Depth Bomb

150685660
75085F01: RNCC: 3 | RNVC: 2
75085F01: RNCC: 5 | RNVC: 2

10 Apr 1986

3040-15-180-1857
Straight Shaft

151801857
00/1090 POS 3: RNCC: 3 | RNVC: 2
31111221000: RNCC: 3 | RNVC: 2

15 Feb 2008

3040-15-180-2419
Worm Wheel Gearshaft

151802419
S9233-DS-MMC-010 FIGURE 7-66-2: RNCC: 3 | RNVC: 2
706-249-635: RNCC: 3 | RNVC: 2
706-249-635: RNCC: 3 | RNVC: 2

18 Feb 2008

3040-17-113-5868
Rigid Connecting Link

171135868
945111: RNCC: 3 | RNVC: 2
C945111: RNCC: 5 | RNVC: 2

29 Sep 2000

3040-17-113-5603
Rigid Connecting Link

171135603
949975: RNCC: 3 | RNVC: 2
C949975: RNCC: 5 | RNVC: 2

15 Sep 2000

3040-17-120-2189
Rigid Connecting Link

171202189
9452401: RNCC: 3 | RNVC: 2
C9452401: RNCC: 5 | RNVC: 2

13 Mar 2007

3040-17-125-1472
Nonaircraft Mechanical Actuator

171251472
AB550N: RNCC: 3 | RNVC: 2
D03N-001: RNCC: 5 | RNVC: 2

22 Oct 2013

3040-17-115-2911
Manual Control Lever

171152911
945510: RNCC: 3 | RNVC: 2
C945510: RNCC: 5 | RNVC: 2

26 Nov 2002

3040-20-001-7486
Linear Actuating Cylinder Assembly Parts Kit

200017486
C20-125: RNCC: 3 | RNVC: 2
C20-125S: RNCC: 5 | RNVC: 9

4 Dec 2004

3040-20-005-6494
Rigid Connecting Link

200056494
HO6003: RNCC: 3 | RNVC: 2

1 Jun 2010

3040-20-007-0087
Bell Crank Support

200070087
AC86895-14-01: RNCC: 3 | RNVC: 2

9 Jul 2012

3040-21-907-6670
Remote Control Lever

219076670
10501028: RNCC: 3 | RNVC: 2
DIN17200 CK45: RNCC: 3 | RNVC: 2
2402-7000.31: RNCC: 3 | RNVC: 2

14 Sep 1990

3040-25-120-9561
Shouldered Shaft

251209561
46751: RNCC: 3 | RNVC: 2
46751: RNCC: 5 | RNVC: 2

26 Jul 1989

3040-25-160-0045
Linear Actuating Cylinder Piston

251600045
3316: RNCC: 3 | RNVC: 2

20 Aug 2007

3040-15-017-4043
A Cylinder Assembly

3040-41-003-1022
Transm Fluid Cooler

3040-58-000-8679
Piston Ring

3040-58-000-8649
Piston Ring

3040-58-000-8747
Shouldered Axle

3040-20-010-4264
A Cylinder Assembly

3040-01-615-0881
Counterbalance Weight

016150881
7-5R2430112-003: RNCC: 3 | RNVC: 2

27 Dec 2012

3040-01-616-4179
Body Hub

016164179
12087-5038-02: RNCC: 3 | RNVC: 2

13 Feb 2013

3040-01-608-6048
Grease Cap

016086048
BB2328P: RNCC: 3 | RNVC: 2

3 Jul 2012

3040-01-618-5063
Spur Gearshaft

016185063
42093E289: RNCC: 3 | RNVC: 2
42093E289: RNCC: 3 | RNVC: 9

25 Apr 2013

3040-01-609-6575
Hydraulic Accumulator

016096575
2ASF12006: RNCC: 3 | RNVC: 2
2ASF12006: RNCC: 3 | RNVC: 9

31 Jul 2012

3040-01-632-1777
Pawl

016321777
0338335: RNCC: 3 | RNVC: 2

9 Oct 2014

3040-01-621-8750
Shouldered Shaft

016218750
12539191: RNCC: 3 | RNVC: 2
12539191: RNCC: 5 | RNVC: 2
12539191: RNCC: D | RNVC: 9

20 Sep 2013

3040-12-181-8563
Shouldered Shaft

121818563
5500500931: RNCC: 2 | RNVC: 2
5500500931: RNCC: 3 | RNVC: 2
5500500931: RNCC: 5 | RNVC: 2
5500500531: RNCC: 5 | RNVC: 2
5505000931: RNCC: 5 | RNVC: 2
5500500531: RNCC: 5 | RNVC: 2
5500500531: RNCC: 5 | RNVC: 2
5505000931: RNCC: 5 | RNVC: 2
5500500531: RNCC: 5 | RNVC: 2
5500500531: RNCC: 5 | RNVC: 9

21 Dec 1979

3040-12-316-8514
Shouldered Shaft

123168514
5552020006: RNCC: 3 | RNVC: 2
5552020006: RNCC: 5 | RNVC: 2
5552020006: RNCC: 5 | RNVC: 2

17 Feb 1989

3040-12-347-5397
Bell Crank

123475397
5205.230.052.000: RNCC: 3 | RNVC: 2

5 Jan 1999

3040-12-351-0939
Body Hub

123510939
6300.150.090.002: RNCC: 3 | RNVC: 2

26 Jun 2000

3040-12-356-3617
Rigid Connecting Link

123563617
027011201: RNCC: 3 | RNVC: 2

19 Feb 2002

3040-12-356-3859
Remote Control Lever

123563859
027000602: RNCC: 3 | RNVC: 2

21 Feb 2002

3040-12-356-3471
Bell Crank

123563471
027500401: RNCC: 3 | RNVC: 2

18 Feb 2002

3040-12-369-3075
Manual Control Lever

123693075
867011914: RNCC: 3 | RNVC: 2

20 Jun 2006

3040-12-357-9067
Shouldered Shaft

123579067
865344601: RNCC: 3 | RNVC: 2

13 Aug 2002

3040-12-379-4621
Linear Actuating Cylinder

123794621
5360980218: RNCC: 3 | RNVC: 2

27 Jul 2009

3040-15-162-4173
Outboard Spring Can

151624173
D121871: RNCC: 3 | RNVC: 2
7377714: RNCC: 5 | RNVC: 2

25 Sep 2001

3040-15-180-0034
Flexible Shaft Assembly Core

151800034
B40/21: RNCC: 3 | RNVC: 2

16 Nov 2007

3040-17-116-0644
Mechanically Actuated Spindle

171160644
945882: RNCC: 3 | RNVC: 2
C945882: RNCC: 5 | RNVC: 2

7 Oct 2003

3040-20-000-3019
Push-Pull Control Assembly Parts Kit

200003019
2016-0901: RNCC: 3 | RNVC: 2
A2016-0901: RNCC: 5 | RNVC: 2

26 Jul 2002

3040-20-002-2121
Linear Actuating Cylinder Assembly

200022121
25260C: RNCC: 3 | RNVC: 2

19 Aug 2005

3040-20-005-6532
Bell Crank

200056532
AC86395-04-07: RNCC: 3 | RNVC: 2

2 Jun 2010

3040-21-907-6812
Shouldered Shaft

219076812
10500509: RNCC: 3 | RNVC: 2

24 Oct 1990

3040-21-914-2346
Remote Control Lever

219142346
10501028-PW: RNCC: 3 | RNVC: 2

4 Jul 1997

3040-21-921-7701
Linear Actuating Cylinder

219217701
JA931000-1: RNCC: 5 | RNVC: 2

18 Mar 2002

3040-22-269-0762
Shaft Retaining Plate

222690762
96080326: RNCC: 3 | RNVC: 2
96080326: RNCC: 5 | RNVC: 2
PL 27.115 POS506: RNCC: 5 | RNVC: 2

7 May 1996

3040-25-160-7417
Rigid Connecting Link

251607417
68110063-00: RNCC: 3 | RNVC: 2

6 Oct 2011

3040-01-685-6627
Ball Joint

016856627
39-501: RNCC: 3 | RNVC: 2
39-501: RNCC: 5 | RNVC: 9

7 Jan 2020

3040-01-689-5208
Pivot Shaft Assembly

016895208
CMS151053: RNCC: 3 | RNVC: 2

25 Jun 2020

3040-01-692-0839
Rigid Connecting Link

016920839
3847AS137-3: RNCC: 3 | RNVC: 2

18 Nov 2020

3040-01-693-8286
Shaft Retaining Plate

016938286
SP-24: RNCC: 3 | RNVC: 2

8 Mar 2021

3040-01-614-9710
Helical Gearshaft

016149710
41012325-103: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-614-9861
Rigid Connecting Link

016149861
29-8078-1: RNCC: 3 | RNVC: 2

20 Dec 2012

3040-01-617-6315
Remote Control Lever

016176315
2ABR12006: RNCC: 3 | RNVC: 2
2ABR12006: RNCC: 3 | RNVC: 9

28 Mar 2013

3040-01-609-1645
Shaft Idler

016091645
02/912527: RNCC: 3 | RNVC: 2

18 Jul 2012

3040-01-610-0108
Flexible Drive Shaft

016100108
1859086: RNCC: 3 | RNVC: 2

8 Aug 2012

3040-01-611-8636
Shouldered Shaft Assembly

016118636
GS-5086-2: RNCC: 3 | RNVC: 2

26 Sep 2012

3040-01-612-9325
Body Hub

016129325
0011-2001: RNCC: 3 | RNVC: 2

24 Oct 2012

3040-01-613-6828
Planetary Gears Carrier

016136828
3412: RNCC: 3 | RNVC: 2

14 Nov 2012

3040-01-613-8033
Extension Shaft

016138033
4D09175-002: RNCC: 3 | RNVC: 2
388B109: RNCC: 5 | RNVC: 1

19 Nov 2012

Load More Results