What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 114 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149518 Items

FR
France
43199 Items

UK
United Kingdom
31327 Items

DE
Germany
16657 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2425 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 240 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 509 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 472 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 226 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 854 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1114 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5325 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2503 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1574 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 739 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2593 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1075 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 364 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 668 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27701 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3192 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2279 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1910 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8989 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3103 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15830 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 344 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3734 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29858 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 174 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1267 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2589 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 415 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10867 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 326 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4494 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 192 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 273 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 255 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 47 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 525 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 666 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 459 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 318 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1029 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Brake Shoe Push Rod? 10 Items: A Brake Shoe Push Rod (PUSH ROD,BRAKE SHOE) is a rod or strut used in a two-leading-shoe type brake assembly. Designed to transmit through the medium of bellcranks, the force applied by the expander unit resulting in a leading shoe action on the second shoe which would otherwise have a trailing shoe action.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 209 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 671 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 313 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 161 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1038 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 217 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7053 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 261 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6041 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 118 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3488 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1860 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 257 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 70 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 39 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 114of 575

3040-01-710-6061
Counterbalance Weight

017106061
23087713-6: RNCC: 3 | RNVC: 2

9 Jun 2023

3040-01-707-9146
Straight Axle

017079146
206-011-125-001: RNCC: 3 | RNVC: 2

3 Mar 2023

3040-01-706-6384
Shouldered Shaft

017066384
7E-7061: RNCC: 3 | RNVC: 2

9 Dec 2022

3040-01-707-1723
Counterbalance Weight

017071723
SLS-011-191-001: RNCC: 3 | RNVC: 2

20 Jan 2023

3040-01-706-4948
Rigid Connecting Link

017064948
4P-3135: RNCC: 3 | RNVC: 2

30 Nov 2022

3040-01-706-4279
Straight Shaft

017064279
161-0071: RNCC: 3 | RNVC: 2

23 Nov 2022

3040-01-709-1645
Linear Actuating Cylinder

017091645
CC99699-001: RNCC: 3 | RNVC: 2
CC73592-6: RNCC: 5 | RNVC: 2
CC73592/SHEET 1 ITEM 6: RNCC: C | RNVC: 1
CC73592: RNCC: D | RNVC: 9

15 May 2023

3040-01-708-4371
Rigid Connecting Link

017084371
SLS-010-220-102: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-708-7300
Nonaircraft Mechanical Actuator

017087300
SE 70002-3: RNCC: 3 | RNVC: 2
7519432-3: RNCC: 5 | RNVC: 2
0SE70002-3: RNCC: D | RNVC: 9
7519432 REV F: RNCC: D | RNVC: 9

19 Apr 2023

3040-01-705-5138
Shouldered Shaft

017055138
37032: RNCC: 3 | RNVC: 2
37032: RNCC: 5 | RNVC: 9

23 Sep 2022

3040-01-705-6048
Counterbalance Weight

017056048
1639M67P03: RNCC: 3 | RNVC: 2

28 Sep 2022

3040-01-709-1149
Shouldered Shaft

017091149
00-971868: RNCC: 3 | RNVC: 2

11 May 2023

3040-01-710-6382
Piston Ring

017106382
00-997696: RNCC: 3 | RNVC: 2

12 Jun 2023

3040-01-708-4366
Rigid Connecting Link

017084366
SLS-010-220-101: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-708-4235
Rigid Connecting Link

017084235
SLS-060-104-001: RNCC: 3 | RNVC: 2

5 Apr 2023

3040-01-546-7930
Shaftzshoulderedzzz

015467930
7550477-264234303-1: RNCC: 3 | RNVC: 2
4558718-0001: RNCC: 5 | RNVC: 1
G547-0001-264234303-1: RNCC: 5 | RNVC: 1
2642-343-03 ITEM 1: RNCC: 5 | RNVC: 1
264234303-1: RNCC: 5 | RNVC: 1
845-4558718 ITEM 1: RNCC: 5 | RNVC: 1
2642-343-03 ITEM 1D4: RNCC: 5 | RNVC: 2
4558718-0001D4: RNCC: 5 | RNVC: 2
264234303-1D4: RNCC: 5 | RNVC: 2
845-4558718 ITEM 1D4: RNCC: 5 | RNVC: 2

3 Jan 2007

3040-01-702-9321
Push-Pull Control Assembly

017029321
60178-170-03: RNCC: 3 | RNVC: 2
PL 60178-100-02: RNCC: 5 | RNVC: 2

8 Aug 2022

3040-01-702-8134
Spline Adapter

017028134
187117-1: RNCC: 3 | RNVC: 2

30 Jul 2022

3040-01-703-3961
Hub

017033961
LG-955-A: RNCC: 3 | RNVC: 2
1806700011 REV 02 ITEM 8: RNCC: 5 | RNVC: 2
A816700011 REV 03 ITEM 8: RNCC: D | RNVC: 9

2 Sep 2022

3040-01-067-3856
Manual Control Lever

010673856
520252: RNCC: 3 | RNVC: 2
24047: RNCC: 5 | RNVC: 9
507710: RNCC: 5 | RNVC: 9
507710: RNCC: 5 | RNVC: 9

29 Oct 1978

3040-01-231-6955
Spur Gearshaft

012316955
0435020: RNCC: 3 | RNVC: 2
0435020: RNCC: 3 | RNVC: 9
5004938: RNCC: 5 | RNVC: 2
435020: RNCC: 5 | RNVC: 9
5004216: RNCC: 5 | RNVC: 9
391289: RNCC: 5 | RNVC: 9
5004216: RNCC: 5 | RNVC: 9
434026: RNCC: 5 | RNVC: 9
435020: RNCC: 5 | RNVC: 9
391289: RNCC: 5 | RNVC: 9

2 May 1986

3040-01-568-7992
Linear Actuating Cylinder Assembly

015687992
604-9020: RNCC: 3 | RNVC: 2
210-7082: RNCC: 5 | RNVC: 9

10 Nov 2008

3040-01-184-8912
Rigid Connecting Link

011848912
7514-6020: RNCC: 3 | RNVC: 2
SR10784A-6020: RNCC: 5 | RNVC: 2
KSL125700BX6020: RNCC: 5 | RNVC: 2
LE162-0002-6020: RNCC: 7 | RNVC: 2

24 Jul 1984

3040-01-181-0999
Remote Control Lever

011810999
9M7394: RNCC: 3 | RNVC: 2
9M7394: RNCC: 5 | RNVC: 2
9M-7394: RNCC: 5 | RNVC: 2

6 Jun 1984

3040-01-170-6754
Ball Joint

011706754
21844002-013: RNCC: 3 | RNVC: 2
90930-991: RNCC: 3 | RNVC: 9
21844002-013: RNCC: 5 | RNVC: 2
2184 4002-013: RNCC: 5 | RNVC: 2
21844002-013: RNCC: 5 | RNVC: 9
90930-991: RNCC: 5 | RNVC: 9
90930-991: RNCC: 5 | RNVC: 9

27 Jan 1984

3040-01-477-3197
Nonaircraft Mechanical Actuator

014773197
Y008557125K1: RNCC: 3 | RNVC: 2
Y008557125 WITH N24299: RNCC: 3 | RNVC: 9
18356N 85 WITH H.O.D.: RNCC: 5 | RNVC: 9
34362N 85 WITH H.O.D.: RNCC: 5 | RNVC: 9
85 WITH H.O.D.: RNCC: 5 | RNVC: 9
85HOD/CD34362N: RNCC: C | RNVC: 1
34362N: RNCC: D | RNVC: 9
18356N: RNCC: D | RNVC: 9

7 Aug 2000

3040-01-702-1165
Rigid Connecting Link

017021165
96350-09: RNCC: 3 | RNVC: 2
49-12-01 REV 0: RNCC: D | RNVC: 9
49-12-01 FIG 4: RNCC: D | RNVC: 9

22 Jun 2022

3040-01-183-2343
Straight Shaft

011832343
A2-17: RNCC: 3 | RNVC: 2
G3-14: RNCC: 3 | RNVC: 2
SS64: RNCC: 3 | RNVC: 2
GS-06: RNCC: 3 | RNVC: 2
7X1-06-017: RNCC: 3 | RNVC: 2
SCD10300: RNCC: 5 | RNVC: 2
120376-007: RNCC: 5 | RNVC: 2
S3-17: RNCC: 5 | RNVC: 9
644: RNCC: 5 | RNVC: 9
AAS-A3-7: RNCC: 5 | RNVC: 9

4 Jul 1984

3040-00-246-4530
Rigid Connecting Link

002464530
206-001-123-5: RNCC: 3 | RNVC: 2
206-001-123-005: RNCC: 5 | RNVC: 2

26 Feb 1969

3040-01-585-2627
Manual Control Lever Assembly

015852627
6V7190: RNCC: 3 | RNVC: 2
6V-7190: RNCC: 5 | RNVC: 2

20 May 2010

3040-01-502-9271
Transmission Fluid Cooler

015029271
314760-902: RNCC: 3 | RNVC: 2
12386405: RNCC: 3 | RNVC: 2
2886: RNCC: 5 | RNVC: 9
10474907: RNCC: 6 | RNVC: 9

25 Nov 2002

3040-01-698-2664
Brake Disc

016982664
7029735: RNCC: 3 | RNVC: 2
7029735: RNCC: 3 | RNVC: 9

5 Nov 2021

3040-01-698-1506
Straight Shaft

016981506
197K2712-5: RNCC: 3 | RNVC: 2
197K2712-5: RNCC: 5 | RNVC: 9

1 Nov 2021

3040-01-697-8173
Brake Backing Plate

016978173
HC3Z-4831-B: RNCC: 3 | RNVC: 2
HC3Z-4831-B: RNCC: 3 | RNVC: 9

13 Oct 2021

3040-01-698-0636
Straight Shaft

016980636
526188-1: RNCC: 3 | RNVC: 2

27 Oct 2021

3040-01-697-8180
Brake Backing Plate

016978180
DC3Z-2B582-A: RNCC: 3 | RNVC: 2
DC3Z-2B582-A: RNCC: 3 | RNVC: 9

13 Oct 2021

3040-01-698-5297
Linear Actuating Cylinder Cap

016985297
001390-000PC12: RNCC: 3 | RNVC: 2
B-0595-032257-000: RNCC: 3 | RNVC: 2

22 Nov 2021

3040-01-187-2977
Rigid Connecting Link

011872977
7514-6018: RNCC: 3 | RNVC: 2
SR10784A-6018: RNCC: 5 | RNVC: 2
125700BX-6018: RNCC: 5 | RNVC: 2
KSL125700BX-6018: RNCC: 5 | RNVC: 2
LE162-0002-6018: RNCC: 7 | RNVC: 2

21 Aug 1984

3040-01-700-7573
Nonaircraft Mechanical Actuator

017007573
HD24B045-1000EXX1EESD: RNCC: 3 | RNVC: 2
HD24B045-1000EXX1EES: RNCC: 5 | RNVC: 9

12 Apr 2022

3040-01-392-8861
Breather

013928861
A-15347: RNCC: 3 | RNVC: 2
52B9243-1: RNCC: 3 | RNVC: 2
52B9243-1: RNCC: 5 | RNVC: 2
303186: RNCC: 5 | RNVC: 2

11 Jul 1994

3040-01-693-1348
Multiple Gears Gearshaft

016931348
8000-0364: RNCC: 3 | RNVC: 2
8592276-001: RNCC: 3 | RNVC: 9
311-8592276: RNCC: D | RNVC: 9

27 Jan 2021

3040-01-648-6932
Control Cable Assembly

016486932
CC34310: RNCC: 3 | RNVC: 2
307060: RNCC: 5 | RNVC: 2
000-33072-0375: RNCC: 5 | RNVC: 2
000-33072-0325: RNCC: 5 | RNVC: 2
307060: RNCC: 5 | RNVC: 9

2 Oct 2015

3040-01-707-5498
Linear Actuating Cylinder

017075498
380-5284: RNCC: 3 | RNVC: 2

8 Feb 2023

3040-01-706-6893
Spur Gearshaft

017066893
7W-2401: RNCC: 3 | RNVC: 2

13 Dec 2022

3040-01-706-8220
Rigid Connecting Link

017068220
437-4030: RNCC: 3 | RNVC: 2

21 Dec 2022

3040-01-706-9212
Control Cam

017069212
16104410: RNCC: 3 | RNVC: 2

3 Jan 2023

3040-01-706-5031
Shaft Retaining Plate

017065031
4P-0294: RNCC: 3 | RNVC: 2

1 Dec 2022

3040-01-706-2034
Shouldered Shaft Assembly

017062034
125329B7: RNCC: 3 | RNVC: 2

8 Nov 2022

3040-01-698-8263
Nonrotating Shaft Eye Bracket

016988263
HC3Z-1104-F: RNCC: 3 | RNVC: 2

13 Dec 2021

3040-01-703-2135
Straight Shaft

017032135
3031879-001: RNCC: 3 | RNVC: 2

23 Aug 2022

3040-01-702-9017
Mechanical Drive Housing

017029017
3867AS1021-3: RNCC: 3 | RNVC: 2
3867AS1021: RNCC: D | RNVC: 9

4 Aug 2022

3040-01-702-5925
Shouldered Shaft

017025925
187244-1: RNCC: 3 | RNVC: 2

16 Jul 2022

3040-01-554-2453
Linear Actuating Cylinder Assembly

015542453
AHC18997: RNCC: 3 | RNVC: 2
AHC17123: RNCC: 5 | RNVC: 2
AHC17123: RNCC: 5 | RNVC: 2
AHC17123: RNCC: 5 | RNVC: 9
AHC17123: RNCC: 5 | RNVC: 9
AH208631: RNCC: 5 | RNVC: 9
AH208631: RNCC: 5 | RNVC: 9
AHC17123: RNCC: 5 | RNVC: 9
AHC17123: RNCC: 5 | RNVC: 9

2 Aug 2007

3040-01-702-2483
Flexible Shaft Assembly Core

017022483
341B11220PF2230-205: RNCC: 3 | RNVC: 2

23 Jun 2022

3040-99-731-2479

3040-12-420-0265

3040-01-195-6125
Governor Valve Adapter

011956125
106048: RNCC: 3 | RNVC: 2
900005: RNCC: 3 | RNVC: 2
106035: RNCC: 3 | RNVC: 2
106035: RNCC: 5 | RNVC: 2
106035: RNCC: 5 | RNVC: 9
106048: RNCC: 5 | RNVC: 9
106035: RNCC: 5 | RNVC: 9
106048: RNCC: 5 | RNVC: 9
106035: RNCC: 5 | RNVC: 9
106048: RNCC: 5 | RNVC: 9

30 Nov 1984

3040-01-493-6858
Straight Shaft

014936858
387 4933-001: RNCC: 3 | RNVC: 9
387 9433-001: RNCC: 5 | RNVC: 2
387 9433-001: RNCC: 5 | RNVC: 2
387 4933-001: RNCC: 5 | RNVC: 9
387 4933-001: RNCC: 5 | RNVC: 9
387 4933-001 TA: RNCC: C | RNVC: 1

15 Jan 2002

3040-01-703-3637
Straight Shaft Assembly

017033637
5-13-10202-2: RNCC: 3 | RNVC: 2
5-13-10202: RNCC: D | RNVC: 9

1 Sep 2022

3040-01-704-3603
Straight Shaft Assembly

017043603
5-13-10203-3: RNCC: 3 | RNVC: 2
5-13-10203-3: RNCC: 5 | RNVC: 2
5-13-10203: RNCC: D | RNVC: 9

9 Sep 2022

3040-01-703-2950
Straight Shaft

017032950
717405174-001: RNCC: 3 | RNVC: 2
717405174: RNCC: D | RNVC: 9

27 Aug 2022

3040-01-189-1198
Rotating Shaft Eye Bracket

011891198
5-45-3310: RNCC: 3 | RNVC: 2
C5-45-3310: RNCC: 5 | RNVC: 9

11 Sep 1984

3040-01-680-6871
Rigid Connecting Link

016806871
2733732: RNCC: 3 | RNVC: 2
2741586: RNCC: 5 | RNVC: 9
2733732: RNCC: 5 | RNVC: 9

16 May 2019

3040-64-001-6418

3040-98-209-0288

3040-01-705-3892
Straight Shaft

017053892
72246: RNCC: 3 | RNVC: 2

19 Sep 2022

3040-01-704-3937
Straight Shaft Assembly

017043937
5-13-10203-2: RNCC: 3 | RNVC: 2
5-13-10203-2: RNCC: 5 | RNVC: 2
5-13-10203: RNCC: D | RNVC: 9

9 Sep 2022

3040-01-677-3780
Rigid Connecting Link

016773780
8592250-001: RNCC: 3 | RNVC: 2
561-8592250 FN 2: RNCC: 5 | RNVC: 2
8592750-001: RNCC: 5 | RNVC: 9

11 Dec 2018

3040-01-703-1891
Mechanical Drive Housing

017031891
415848-1: RNCC: 3 | RNVC: 2
415848: RNCC: D | RNVC: 9

22 Aug 2022

3040-01-140-0781
Straight Shaft

011400781
12012176: RNCC: 3 | RNVC: 2
P-ZLAB-0000524: RNCC: 5 | RNVC: 2
12012176: RNCC: 5 | RNVC: 2

7 Oct 1982

3040-01-433-2597
Linear Actuating Cylinder Assembly

014332597
1H2H0A00348949: RNCC: 3 | RNVC: 2
FG209302A0: RNCC: 3 | RNVC: 9
2.50CBB-2HLTVS14 X 78.00: RNCC: 5 | RNVC: 9

25 Jun 1996

3040-01-700-8018
Housing Adapter

017008018
5802076651: RNCC: 3 | RNVC: 2

14 Apr 2022

3040-01-700-8211
Straight Shaft

017008211
595-8544603-PN-10: RNCC: 3 | RNVC: 2
H684-8001-PN-10: RNCC: 5 | RNVC: 2
8544603: RNCC: 5 | RNVC: 2

15 Apr 2022

3040-01-700-6428
Spur Gearshaft

017006428
06351-08268-103: RNCC: 3 | RNVC: 2

5 Apr 2022

3040-01-699-6936
Straight Shaft

016996936
22405-01: RNCC: 1 | RNVC: 2
22405-01: RNCC: 3 | RNVC: 2

18 Feb 2022

3040-01-701-8230
Shouldered Shaft

017018230
B19157-1: RNCC: 3 | RNVC: 2

10 Jun 2022

3040-01-701-9511
Counterbalance Weight

017019511
6539582: RNCC: 3 | RNVC: 2

17 Jun 2022

3040-01-699-3965
Control Cam

016993965
47739-4: RNCC: 3 | RNVC: 2
5075 SHT 9 IT NO 9: RNCC: C | RNVC: 1
5075/REV C SHEET 9 FIND NO 9: RNCC: C | RNVC: 1

27 Jan 2022

3040-01-699-4165
Linear Actuating Cylinder Cap

016994165
CC49810-001: RNCC: 3 | RNVC: 2
CC49816-ITEM NO-7: RNCC: D | RNVC: 9

28 Jan 2022

3040-01-698-8748
Bell Crank Support

016988748
06208-02106-069: RNCC: 3 | RNVC: 2

16 Dec 2021

3040-01-702-4167
Linear Actuating Cylinder Piston

017024167
01135793: RNCC: 3 | RNVC: 2

5 Jul 2022

3040-01-701-0090
Hydraulic Accumulator Cylinder

017010090
71881800: RNCC: 3 | RNVC: 2
P009852 ITEM NO 2: RNCC: C | RNVC: 1
P010195: RNCC: D | RNVC: 9

22 Apr 2022

3040-01-701-0688
Lever Fitting

017010688
2007653-1: RNCC: 3 | RNVC: 2
2007653: RNCC: D | RNVC: 9

26 Apr 2022

3040-01-700-9609
Shouldered Shaft Assembly

017009609
8600117-03-001: RNCC: 3 | RNVC: 2
8600117-03/SHEET 1: RNCC: D | RNVC: 9

21 Apr 2022

3040-01-702-1497
Shaft Idler

017021497
4349010: RNCC: 3 | RNVC: 2

22 Jun 2022

3040-01-698-7229
Nonaircraft Mechanical Actuator

016987229
42442: RNCC: 3 | RNVC: 2
D-WK-879-3 / REV N PC 9 NOTE 11: RNCC: D | RNVC: 9
42442/ REV A: RNCC: D | RNVC: 9

3 Dec 2021

3040-01-702-3791
Helical Gearshaft

017023791
187123-1: RNCC: 3 | RNVC: 2

30 Jun 2022

3040-01-699-9088
In Pinion Assembly

016999088
06351-08260-042: RNCC: 3 | RNVC: 2

6 Mar 2022

3040-01-701-5695
Manual Control Lever Assembly

017015695
12582022: RNCC: 3 | RNVC: 2

24 May 2022

3040-01-698-5659
Actuator Rod

016985659
2238-5-66: RNCC: 3 | RNVC: 2
2238-5 ITEM NO 66: RNCC: 5 | RNVC: 1

24 Nov 2021

3040-01-699-9621
Detent Plate

016999621
5-13-10478-1: RNCC: 3 | RNVC: 2
5-13-10478: RNCC: 7 | RNVC: 2

8 Mar 2022

3040-01-699-8738
Straight Shaft

016998738
213747-00: RNCC: 3 | RNVC: 2

3 Mar 2022

3040-01-699-9085
Main Rotor Shaft

016999085
06351-08110-043: RNCC: 3 | RNVC: 2

6 Mar 2022

3040-01-710-6058
Counterbalance Weight

017106058
23087713-4: RNCC: 3 | RNVC: 2

9 Jun 2023

3040-01-710-6383
Piston Ring

017106383
00-997697: RNCC: 3 | RNVC: 2

12 Jun 2023

3040-01-708-7286
Straight Shaft

017087286
412-040-620-103FM: RNCC: 3 | RNVC: 2

19 Apr 2023

3040-01-710-5845
Rigid Connecting Link

017105845
752-7068433-PN-263: RNCC: 3 | RNVC: 2
H832-0399-PN-263: RNCC: 5 | RNVC: 2
752-7068433: RNCC: D | RNVC: 9

8 Jun 2023

3040-01-710-6165
Nonaircraft Mechanical Actuator

017106165
0511/15-S793-100: RNCC: 3 | RNVC: 2
OPC0511: RNCC: D | RNVC: 9

12 Jun 2023

3040-01-708-5057
Spur Gearshaft

017085057
406-040-028-101: RNCC: 3 | RNVC: 2

11 Apr 2023

3040-01-281-1101
Linear Actuating Cylinder Assembly

012811101
1H2H0A00070694: RNCC: 3 | RNVC: 2
GG112762A0: RNCC: 5 | RNVC: 9
2.00CBB-2HLTS14ACX18.500: RNCC: 5 | RNVC: 9
AG160854A0: RNCC: 5 | RNVC: 9

17 Jun 1988

3040-01-475-7149
Linear Actuating Cylinder Piston Rod

014757149
CC92854-001: RNCC: 3 | RNVC: 2
41137: RNCC: 3 | RNVC: 9
CC89964 IT 2: RNCC: 5 | RNVC: 2
LA95-41135 ITEM 2: RNCC: 5 | RNVC: 9

12 Jun 2000

3040-01-710-6763
Extension Shaft

017106763
113247006: RNCC: 3 | RNVC: 2

15 Jun 2023

3040-01-710-6032
Nonaircraft Mechanical Actuator

017106032
0511/15-S793-143: RNCC: 3 | RNVC: 2
OPC0511: RNCC: D | RNVC: 9

9 Jun 2023

3040-01-415-1700
Straight Shaft

014151700
CF646176: RNCC: 3 | RNVC: 2
646176: RNCC: 3 | RNVC: 9
643689: RNCC: 5 | RNVC: 9

21 Jun 1995

3040-01-189-4715
Linear Actuating Cylinder Cap

011894715
27191X01-001: RNCC: 3 | RNVC: 2
27191: RNCC: 5 | RNVC: 9
14-27030 ITEM 5: RNCC: 5 | RNVC: 9
14-27030: RNCC: D | RNVC: 9

15 Sep 1984

3040-01-588-0939
Shouldered Shaft

015880939
GS2AE8: RNCC: 3 | RNVC: 2
GS1AE8: RNCC: 3 | RNVC: 9

1 Sep 2010

3040-01-546-0716
Linear Actuating Cylinder Assembly

015460716
9241490001: RNCC: 3 | RNVC: 2
MP-0002720G: RNCC: 3 | RNVC: 2
924149.0001: RNCC: 5 | RNVC: 2
CV185419: RNCC: 5 | RNVC: 2
924149.0001: RNCC: 5 | RNVC: 2

5 Dec 2006

3040-01-161-1264
Shouldered Shaft

011611264
402-04-50-0064-0C2N: RNCC: 3 | RNVC: 9
2620-926X10: RNCC: 5 | RNVC: 2
SS845-2110229 PIECE 17-5IN: RNCC: 5 | RNVC: 9
2620-926X10PC17 5 IN: RNCC: 5 | RNVC: 9
2620-926X10 PIECE 16-17-5- IN: RNCC: 5 | RNVC: 9
SS845-2110229 PIECE 16-17-5-IN: RNCC: 5 | RNVC: 9
55845-2110229: RNCC: 5 | RNVC: 9
2620-926X10PC17 5 IN: RNCC: 5 | RNVC: 9
402-35-50-0054-0C2N: RNCC: 5 | RNVC: 9
SS845-2110229 PC 16 AN 17-5IN: RNCC: 5 | RNVC: 9

1 Sep 1983

3040-01-501-8589
Linear Actuating Cylinder Assembly

015018589
861659A 1: RNCC: 3 | RNVC: 2
861659T 1: RNCC: 3 | RNVC: 9

18 Oct 2002

3040-00-394-8447
Turbine Shaft

003948447
4953: RNCC: 3 | RNVC: 2
4953: RNCC: 5 | RNVC: 9
4953: RNCC: 5 | RNVC: 9
4953: RNCC: 5 | RNVC: 9
4953: RNCC: 5 | RNVC: 9
D15-664APC527T0531-574: RNCC: 5 | RNVC: 9
D15-664-0PC527T0531-574: RNCC: 5 | RNVC: 9
D15-664FPC574T0577: RNCC: 5 | RNVC: 9
D15-664EPC527T0531-574: RNCC: 5 | RNVC: 9
D15-664MPC527T0531-574: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-420-2009
Positioning Shoe

004202009
S805ED: RNCC: 3 | RNVC: 2
SG1968PC33: RNCC: 5 | RNVC: 9
SG1976PC33: RNCC: 5 | RNVC: 9
SG2042PC33: RNCC: 5 | RNVC: 9
SG1809PC33: RNCC: 5 | RNVC: 9
SG1749PC33: RNCC: 5 | RNVC: 9
SG1973PC33: RNCC: 5 | RNVC: 9
SG2039PC33: RNCC: 5 | RNVC: 9
SG2089PC33: RNCC: 5 | RNVC: 9
SG1728PC33: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-6780
Helical Gearshaft

007346780
62-8-40: RNCC: 3 | RNVC: 2
1001Z767: RNCC: 5 | RNVC: 2
62-8-40: RNCC: 5 | RNVC: 2
SQAP7346780: RNCC: 5 | RNVC: 2
495200C1: RNCC: 5 | RNVC: 2
7346780: RNCC: 5 | RNVC: 2
100077R1: RNCC: 5 | RNVC: 9
T406-18: RNCC: 5 | RNVC: 9
316679: RNCC: 5 | RNVC: 9
100077R1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-495-9385
Shaftzshoulderedzzz

014959385
7383858-H5471721-060: RNCC: 3 | RNVC: 1
167-7108111-60: RNCC: 5 | RNVC: 1
H547-0001-H5471721-060: RNCC: 5 | RNVC: 1
H547-1721-60: RNCC: 5 | RNVC: 1
7383858-7108111-60L1: RNCC: 5 | RNVC: 1
H5470001-H5471721-60: RNCC: 5 | RNVC: 1
167-7108111-60L1: RNCC: 5 | RNVC: 2
7383858-H5471721-060L1: RNCC: 5 | RNVC: 2
H547-0001-H5471721-060L1: RNCC: 5 | RNVC: 2
H547-1721-60L1: RNCC: 5 | RNVC: 2

28 Mar 2002

3040-01-703-0163
Mechanical Drive Housing

017030163
29549763: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-01-276-2851
Ball Joint

012762851
23-7003-00: RNCC: 3 | RNVC: 2
23-7000-00: RNCC: 5 | RNVC: 2

6 Apr 1988

3040-01-141-4011
Pump Shaft

011414011
737228: RNCC: 3 | RNVC: 2
NF7055-507: RNCC: 3 | RNVC: 2
NF-7055 PC 507: RNCC: 5 | RNVC: 2
507NF-7055: RNCC: 5 | RNVC: 9
NH-7034 PC 507: RNCC: 5 | RNVC: 9
737228: RNCC: 5 | RNVC: 9
NF-7055 PC 507: RNCC: 5 | RNVC: 9
NF-7055 PC 507: RNCC: 5 | RNVC: 9
737228: RNCC: 5 | RNVC: 9
507NF-7055: RNCC: 5 | RNVC: 9

28 Oct 1982

3040-00-337-1018
Helical Gearshaft

003371018
355154: RNCC: 3 | RNVC: 2
800520PC58: RNCC: 5 | RNVC: 2
800524PC58: RNCC: 5 | RNVC: 2
800503PC58: RNCC: 5 | RNVC: 2
801068PC58: RNCC: 5 | RNVC: 2
6887: RNCC: 5 | RNVC: 2
LST1S4200-253054: RNCC: 5 | RNVC: 2
LST1S4200-253067: RNCC: 5 | RNVC: 2
LST511S4200-2554: RNCC: 5 | RNVC: 2
801069PC58: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-475-1231
Linear Actuating Cylinder Assembly

014751231
3798328-1: RNCC: 3 | RNVC: 2
751-6402404 ITEM15: RNCC: 5 | RNVC: 2
751-6402405 ITEM15: RNCC: 5 | RNVC: 2
751-6402405-15: RNCC: 5 | RNVC: 2
751-6402406 FIND15: RNCC: 5 | RNVC: 2
751-6402406 ITEM15: RNCC: 5 | RNVC: 2
751-6402406-15: RNCC: 5 | RNVC: 2
751-6402407 FIND15: RNCC: 5 | RNVC: 2
751-6402407 ITEM15: RNCC: 5 | RNVC: 2
751-6402407-15: RNCC: 5 | RNVC: 2

23 May 2000

3040-01-701-4126
Straight Shaft

017014126
251T0101-503: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-701-4131
Straight Shaft

017014131
251T0100-504: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-699-8311
Breather

016998311
1700291257: RNCC: 3 | RNVC: 2

1 Mar 2022

3040-00-388-0944
Steam Turbine Shaft

003880944
KMC-SG3709-114: RNCC: 3 | RNVC: 2
11319: RNCC: 3 | RNVC: 2
S2819JA: RNCC: 3 | RNVC: 2
SG2956PC107: RNCC: 5 | RNVC: 2
SG2802PC111: RNCC: 5 | RNVC: 2
SG3709PC114: RNCC: 5 | RNVC: 2
G9695PC110: RNCC: 5 | RNVC: 2
G9696PC107: RNCC: 5 | RNVC: 2
SG2881APC78: RNCC: 5 | RNVC: 2
SG3973PC110: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-3822
Spur Gearshaft

016993822
3030678-001: RNCC: 3 | RNVC: 2

26 Jan 2022

3040-01-699-1570
Nonaircraft Mechanical Actuator

016991570
CTORVO-000294: RNCC: 3 | RNVC: 2
505-8787568 REV A (F3): RNCC: 5 | RNVC: 2
505-8787568 REV A: RNCC: D | RNVC: 9

12 Jan 2022

3040-01-700-8071
Controllable Swashplate

017008071
06100-08114-102: RNCC: 3 | RNVC: 2
06100-08114: RNCC: D | RNVC: 9

14 Apr 2022

3040-01-700-3065
Straight Shaft

017003065
12644201: RNCC: 3 | RNVC: 2
BS.2318.00.00.027: RNCC: 5 | RNVC: 9

23 Mar 2022

3040-01-699-0339
Shaft Collar

016990339
3890AS004706-01: RNCC: 3 | RNVC: 2

4 Jan 2022

3040-01-701-4601
Worm Wheel Gearshaft

017014601
506-30-51: RNCC: 3 | RNVC: 2
506-30-51: RNCC: 5 | RNVC: 9
241-8592072 REV C SHEET 2 OF 2: RNCC: D | RNVC: 9

17 May 2022

3040-01-699-0223
Shaft Idler

016990223
8418365: RNCC: 3 | RNVC: 1
8418365: RNCC: 5 | RNVC: 1

3 Jan 2022

3040-01-701-6079
Counterbalance Weight

017016079
952B928-5: RNCC: 3 | RNVC: 2

26 May 2022

3040-01-701-6078
Counterbalance Weight

017016078
952B928-6: RNCC: 3 | RNVC: 2

26 May 2022

3040-01-701-5056
Shaft Retaining Plate

017015056
8287874: RNCC: 3 | RNVC: 2
8288670PC01: RNCC: C | RNVC: 1
8288670: RNCC: D | RNVC: 9

19 May 2022

3040-01-698-8357
Nonvehicular Propeller Shaft

016988357
HC3Z-4A376-B: RNCC: 3 | RNVC: 2
HC3Z-4A376-B: RNCC: 5 | RNVC: 2
HC3Z-4A376-A: RNCC: 5 | RNVC: 9

14 Dec 2021

3040-01-701-7604
Air Clutch Outer Shaft End Cap

017017604
8287870: RNCC: 3 | RNVC: 2
8287862PC08: RNCC: C | RNVC: 1
8287862: RNCC: D | RNVC: 9

7 Jun 2022

3040-01-700-6352
Shaft Retaining Plate

017006352
607989-241-CA: RNCC: 3 | RNVC: 2
801635-541 PIECE 7: RNCC: 5 | RNVC: 1
801635-541: RNCC: D | RNVC: 9

5 Apr 2022

3040-01-701-3814
Mechanically Actuated Spindle

017013814
167-7569488 / PC NO 143: RNCC: 3 | RNVC: 2
SP002107 / PC NO 65: RNCC: 5 | RNVC: 1
7569488 / PC NO 143: RNCC: C | RNVC: 1

13 May 2022

3040-01-701-5254
Shouldered Shaft

017015254
8287636: RNCC: 1 | RNVC: 2
P3860-005C: RNCC: 3 | RNVC: 2

20 May 2022

3040-01-701-7124
Straight Shaft Assembly

017017124
8287954: RNCC: 3 | RNVC: 2
8287862PC33: RNCC: D | RNVC: 9

2 Jun 2022

3040-01-700-6445
Multiple Gears Gearshaft

017006445
06361-08004-101: RNCC: 3 | RNVC: 2

5 Apr 2022

3040-01-702-6816
Spline Adapter

017026816
03E-95164-0: RNCC: 3 | RNVC: 2

20 Jul 2022

3040-01-700-6624
Shaft Collar

017006624
10092067: RNCC: 3 | RNVC: 2
10091884 ITEM 9: RNCC: C | RNVC: 1

6 Apr 2022

3040-01-702-2816
Pawl

017022816
19009A0112: RNCC: 3 | RNVC: 2

27 Jun 2022

3040-01-701-4127
Straight Shaft

017014127
251T0100-130: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-701-4293
Shaft Idler

017014293
506-30-23: RNCC: 3 | RNVC: 2
241-8592072 REV C SHEET 1 OF 2: RNCC: D | RNVC: 9

16 May 2022

3040-01-701-7879
Linear Actuating Cylinder Cap

017017879
930-31553: RNCC: 3 | RNVC: 1

8 Jun 2022

3040-01-700-4174
Remote Control Lever

017004174
TEC-R11-MAN-TC: RNCC: 3 | RNVC: 2
TO 36A12-12-49-4: RNCC: D | RNVC: 9

28 Mar 2022

3040-01-702-0090
Straight Shaft

017020090
12617855: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-700-8385
Shouldered Shaft

017008385
7262200336: RNCC: 3 | RNVC: 2

15 Apr 2022

3040-01-702-1824
Counterbalance Weight

017021824
717407166-002: RNCC: 3 | RNVC: 2

22 Jun 2022

3040-01-701-0306
Linear Actuating Cylinder

017010306
R5-314-16-014.375A-MC: RNCC: 3 | RNVC: 2
IQ8901-0010-01A REV 3 ITEM 3: RNCC: D | RNVC: 9

22 Apr 2022

3040-01-701-9117
Rigid Connecting Link

017019117
1TD13G1H00003-1001: RNCC: 3 | RNVC: 2
22555-1: RNCC: 3 | RNVC: 2

15 Jun 2022

3040-01-703-0556
Shaft Collar

017030556
456-7822: RNCC: 3 | RNVC: 2

15 Aug 2022

3040-01-703-3962
Assembly Hub

017033962
A80090036M-A: RNCC: 3 | RNVC: 2
A816700011 REV 03 ITEM 1: RNCC: 5 | RNVC: 2
1806700011 REV 02 ITEM 1: RNCC: D | RNVC: 9

2 Sep 2022

3040-01-701-0754
Remote Control Lever

017010754
725-8837478-A9: RNCC: 3 | RNVC: 2
LOA017170-A9: RNCC: 5 | RNVC: 2
725-8837478: RNCC: D | RNVC: 9

26 Apr 2022

3040-01-700-8052
Rigid Connecting Link

017008052
0953SA119: RNCC: 3 | RNVC: 2
70016718: RNCC: 5 | RNVC: 9

14 Apr 2022

3040-01-702-9647
Counterbalance Weight

017029647
6539583: RNCC: 3 | RNVC: 2

9 Aug 2022

3040-01-698-1090
Disc Brake Caliper

016981090
HC3Z-2B292-B: RNCC: 3 | RNVC: 2
HC3Z-2B292-B: RNCC: 3 | RNVC: 9

28 Oct 2021

3040-01-699-5064
Linear Actuating Cylinder Cap

016995064
332/E7798: RNCC: 3 | RNVC: 2

4 Feb 2022

3040-01-698-0172
Ball Joint

016980172
BC3Z-3049-B: RNCC: 3 | RNVC: 2
BC3Z-3049-B: RNCC: 3 | RNVC: 9

22 Oct 2021

3040-01-543-3361
Linear Actuating Cylinder Piston

015433361
3W0640: RNCC: 3 | RNVC: 2
3W-0640: RNCC: 5 | RNVC: 2

8 Sep 2006

3040-01-698-0015
Body Hub

016980015
5-16-2103-00: RNCC: 3 | RNVC: 2

22 Oct 2021

3040-01-698-0146
Friction Lining

016980146
7B1-06492: RNCC: 3 | RNVC: 2
7B1-06492 REV A: RNCC: 5 | RNVC: 2
P008486 REV D ITEM NO 36: RNCC: C | RNVC: 1

22 Oct 2021

3040-01-699-2072
Transmission Sleeve

016992072
3030441-001: RNCC: 3 | RNVC: 2

15 Jan 2022

3040-01-699-1569
Nonaircraft Mechanical Actuator

016991569
CTORVO-000285: RNCC: 3 | RNVC: 2
505-8787566 REV A (F4): RNCC: 5 | RNVC: 2
505-8787566 REV A: RNCC: D | RNVC: 9

12 Jan 2022

3040-01-641-1212
Body Hub

016411212
7550479-DF331473-0002: RNCC: 3 | RNVC: 1
801-6406788 FIND 2: RNCC: 5 | RNVC: 1
DF331473 FIND 2: RNCC: 5 | RNVC: 1
211061327: RNCC: 5 | RNVC: 1
DF331473-0002: RNCC: 5 | RNVC: 1
G547-0003-DF331473-0002: RNCC: 5 | RNVC: 1
7383858-DF331473-0002: RNCC: 5 | RNVC: 1
H547-0001-DF331473-0002: RNCC: 5 | RNVC: 1
801-6406788 FIND 2D4: RNCC: 5 | RNVC: 2
7383858-DF331473-0002D4: RNCC: 5 | RNVC: 2

9 Jan 2015

3040-01-700-0137
Straight Shaft

017000137
MX00017: RNCC: 3 | RNVC: 9

11 Mar 2022

3040-01-696-4356
Linear Actuating Cylinder Assembly

016964356
D24008022FHAZ: RNCC: 3 | RNVC: 2
D240008022FHAZ: RNCC: 5 | RNVC: 9
3730487: RNCC: 7 | RNVC: 2

27 Jul 2021

3040-01-698-6433
Straight Shaft

016986433
8592552-046: RNCC: 3 | RNVC: 2
251-8592097 REV F FN 505: RNCC: 5 | RNVC: 2

1 Dec 2021

3040-01-697-7213
Straight Shaft

016977213
10017335-001-001: RNCC: 3 | RNVC: 2

6 Oct 2021

3040-01-699-8007
Linear Actuating Cylinder Cap

016998007
CC49812-001: RNCC: 3 | RNVC: 2

25 Feb 2022

3040-00-421-4791
Rigid Connecting Link

004214791
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-490: RNCC: 3 | RNVC: 2

9 Dec 1970

3040-01-699-5085
Linear Actuating Cylinder Cap

016995085
332/G8463: RNCC: 3 | RNVC: 2

4 Feb 2022

3040-01-698-5300
Linear Actuating Cylinder Cap

016985300
001390-000PC18: RNCC: 3 | RNVC: 2
B-0595-032055-000: RNCC: 3 | RNVC: 2

22 Nov 2021

3040-01-698-6444
Actuation Rod

016986444
8592097-013: RNCC: 3 | RNVC: 2
251-8592097 REV F FN 514: RNCC: 5 | RNVC: 2

1 Dec 2021

3040-00-118-8685
Manual Control Lever

001188685
XG8383984: RNCC: 3 | RNVC: 9
8754003: RNCC: 5 | RNVC: 2
XG8383984: RNCC: 5 | RNVC: 9
2520001188685: RNCC: 5 | RNVC: 9

14 Oct 1968

3040-00-420-2017
Positioning Shoe

004202017
SG1732PC16: RNCC: 3 | RNVC: 2
S805GE: RNCC: 3 | RNVC: 2
SG2632PC16: RNCC: 3 | RNVC: 2
SG1938PC16: RNCC: 3 | RNVC: 2
SG2053PC16: RNCC: 3 | RNVC: 2
SG2073PC16: RNCC: 3 | RNVC: 2
SG2635PC16: RNCC: 3 | RNVC: 2
SG1735PC16: RNCC: 3 | RNVC: 2
SG2050PC16: RNCC: 3 | RNVC: 2
SG1941PC16: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-704-3912
Straight Shaft Assembly

017043912
5-13-10202-3: RNCC: 3 | RNVC: 2
5-13-10202-3: RNCC: 5 | RNVC: 2
5-13-10202: RNCC: D | RNVC: 9

9 Sep 2022

3040-01-692-8446
Multiple Gears Gearshaft

016928446
8000-0367: RNCC: 3 | RNVC: 2
8592275-001: RNCC: 3 | RNVC: 9
311-8592275: RNCC: D | RNVC: 9

14 Jan 2021

3040-01-479-4853
Linear Actuating Cylinder Piston

014794853
CB29098-001: RNCC: 3 | RNVC: 2
CC79492-001: RNCC: 3 | RNVC: 2
30078-41470 ITEM 11: RNCC: 5 | RNVC: 2
30096-41450 ITEM 11: RNCC: 5 | RNVC: 2
41461: RNCC: 5 | RNVC: 9
30078-41470: RNCC: D | RNVC: 9
30096-41450: RNCC: D | RNVC: 9

23 Oct 2000

3040-01-702-0101
Rigid Connecting Link

017020101
12618214: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-702-7807
Shouldered Shaft

017027807
184937-1: RNCC: 3 | RNVC: 2

27 Jul 2022

3040-01-703-1348
Nonrotating Shaft Eye Bracket

017031348
510479-10: RNCC: 3 | RNVC: 2
510479: RNCC: D | RNVC: 9

18 Aug 2022

3040-01-073-5563
Straight Shaft

010735563
2241322-5: RNCC: 3 | RNVC: 2
2241322-5: RNCC: 3 | RNVC: 9
2241322-4: RNCC: 5 | RNVC: 9
2241322-2: RNCC: C | RNVC: 1

17 Mar 1979

3040-12-179-1082
Ball Joint

121791082
0732 107 018: RNCC: 3 | RNVC: 2
42485639: RNCC: 5 | RNVC: 2
42485639EY5013-53: RNCC: 5 | RNVC: 2
0732107018: RNCC: 5 | RNVC: 2
0732107018: RNCC: 5 | RNVC: 2
(241)A39630-114670: RNCC: 5 | RNVC: 2
7394146: RNCC: 5 | RNVC: 2
0002684689: RNCC: 5 | RNVC: 2
90900989010: RNCC: 5 | RNVC: 9
81.95301-6130: RNCC: 5 | RNVC: 9

6 Jun 1979

3040-01-702-6534
Rigid Connecting Link

017026534
212A1125-31: RNCC: 3 | RNVC: 2

19 Jul 2022

3040-00-121-6391
Rigid Connecting Link

001216391
206-040-192-001: RNCC: 3 | RNVC: 2
206-040-192-1: RNCC: 5 | RNVC: 2

25 Oct 1968

3040-01-384-1054
Push-Pull Control Assembly

013841054
3009-075-1615: RNCC: 3 | RNVC: 2
032377-003-53FT: RNCC: 5 | RNVC: 9
32377-003-53FT: RNCC: 5 | RNVC: 9
33-C-636IN: RNCC: 5 | RNVC: 9
33C53FT: RNCC: 5 | RNVC: 9
D032377-003-53FT: RNCC: 5 | RNVC: 9
032377-003-53FT: RNCC: 5 | RNVC: 9
33C53FT: RNCC: 5 | RNVC: 9
D032377-003-53FT: RNCC: 5 | RNVC: 9
32377-003-53FT: RNCC: 5 | RNVC: 9

8 Dec 1993

3040-01-578-7519
Shaft Collar

015787519
790673-001 OXYGEN CLEAN: RNCC: 3 | RNVC: 1
790542 ITEM NO 5CP: RNCC: 5 | RNVC: 1
790673-001: RNCC: 5 | RNVC: 1
790673-001 OXYGEN CLEANCP: RNCC: 5 | RNVC: 2
790542 ITEM NO 5CP: RNCC: 5 | RNVC: 2
790673-001CP: RNCC: 5 | RNVC: 2

19 Oct 2009

3040-01-168-1488
Rigid Connecting Link

011681488
12255720: RNCC: 3 | RNVC: 2
2540011681488: RNCC: 6 | RNVC: 9

13 Dec 1983

3040-01-552-3749
Rigid Connecting Link

015523749
1821428: RNCC: 3 | RNVC: 2
1821428: RNCC: 5 | RNVC: 2
10466173: RNCC: 6 | RNVC: 9

12 Jun 2007

3040-01-257-8906
Remote Control Lever

012578906
T63652: RNCC: 3 | RNVC: 2
T11701: RNCC: 5 | RNVC: 9

25 Jun 1987

3040-01-326-3187
Body Hub

013263187
C109046: RNCC: 3 | RNVC: 2
E105860 PIECE 66: RNCC: 5 | RNVC: 2
D305450 PIECE 66: RNCC: 5 | RNVC: 2
E108165 PIECE 66: RNCC: 5 | RNVC: 2
E108186 PIECE 66: RNCC: 5 | RNVC: 2
E108186 PIECE 66: RNCC: 5 | RNVC: 9
C109046: RNCC: 5 | RNVC: 9
D305450 PIECE 66: RNCC: 5 | RNVC: 9
E105860 PIECE 66: RNCC: 5 | RNVC: 9
E108165 PIECE 66: RNCC: 5 | RNVC: 9

21 Sep 1990

3040-01-597-2326
Pawl

015972326
3W9208: RNCC: 3 | RNVC: 2
3W-9208: RNCC: 5 | RNVC: 2
343-9606: RNCC: D | RNVC: 9

2 Jun 2011

3040-01-706-4891
Shaft Idler

017064891
4W-6862: RNCC: 3 | RNVC: 2

30 Nov 2022

3040-01-706-6749
Cylinder Support

017066749
576-9689: RNCC: 3 | RNVC: 2

12 Dec 2022

3040-01-707-8045
Shouldered Shaft

017078045
031537: RNCC: 3 | RNVC: 2
309846: RNCC: 5 | RNVC: 2
031537: RNCC: 5 | RNVC: 9

23 Feb 2023

3040-01-705-8221
Counterbalance Weight

017058221
603862-0: RNCC: 3 | RNVC: 2

14 Oct 2022

3040-01-555-1058
Sun Gear

015551058
7T9370: RNCC: 3 | RNVC: 2
7T-9370: RNCC: 5 | RNVC: 2

29 Aug 2007

3040-01-565-0315
Hub (Pinion)

015650315
401-02329: RNCC: 3 | RNVC: 2
401-02297(K) POS 6: RNCC: 5 | RNVC: 2
401-02297(K): RNCC: D | RNVC: 9

9 Jul 2008

3040-00-567-0518
Hub Clamp

005670518
9360130-2: RNCC: 3 | RNVC: 2
L1-11: RNCC: 3 | RNVC: 2
711699-040: RNCC: 5 | RNVC: 2
711699-40: RNCC: 5 | RNVC: 2
9147C5035-2: RNCC: 5 | RNVC: 9
3040PL0733101: RNCC: 6 | RNVC: 9
3040005670518: RNCC: 6 | RNVC: 9
9360130: RNCC: 7 | RNVC: 1
9147C5035-2: RNCC: 7 | RNVC: 2
59127-2: RNCC: C | RNVC: 1

1 Jan 1961

3040-12-420-3080

3040-15-030-8360

NSN 3040-01-467-2856 014672856 FLEXIBLE SHAFT

3040-01-467-2856
Flexible Shaft

014672856
225-01: RNCC: 3 | RNVC: 9
0350624119185: RNCC: 5 | RNVC: 2
225: RNCC: 5 | RNVC: 9

23 Aug 1999

3040-01-442-1737
Push-Pull Control Assembly

014421737
CC23022: RNCC: 3 | RNVC: 2
3009-075-0671: RNCC: 5 | RNVC: 2
D032377-003-22FT: RNCC: 5 | RNVC: 9
D032377-003-264IN: RNCC: 5 | RNVC: 9
32377-003-264IN: RNCC: 5 | RNVC: 9
32377-003-264IN: RNCC: 5 | RNVC: 9
33C-264IN: RNCC: 5 | RNVC: 9
032377-003-264.0: RNCC: 5 | RNVC: 9
33C-22FT: RNCC: 5 | RNVC: 9
D032377-003-264IN: RNCC: 5 | RNVC: 9

6 Mar 1997

3040-00-035-9407
Manual Control Lever

000359407
B5468402004: RNCC: 3 | RNVC: 9
22360501: RNCC: 5 | RNVC: 9
S3998LPC12: RNCC: 5 | RNVC: 9
S4004LPC12: RNCC: 5 | RNVC: 9
S5163LPC12: RNCC: 5 | RNVC: 9
11722: RNCC: 5 | RNVC: 9
S3534L2PC12: RNCC: 5 | RNVC: 9
S3535L1PC12: RNCC: 5 | RNVC: 9
S3488L2PC12: RNCC: 5 | RNVC: 9
S3681LPC12: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-702-8619
Shouldered Shaft

017028619
184723-1: RNCC: 3 | RNVC: 2

2 Aug 2022

3040-01-702-9324
Push-Pull Control Assembly

017029324
60178-002-05: RNCC: 3 | RNVC: 2
60178-000-97: RNCC: 5 | RNVC: 2

8 Aug 2022

3040-01-702-7196
Straight Shaft

017027196
12309/5-151-000: RNCC: 3 | RNVC: 2
12151/ PL/ REV C FN 9: RNCC: 5 | RNVC: 2

22 Jul 2022

3040-01-702-0573
Spur Gearshaft

017020573
12617359: RNCC: 3 | RNVC: 2

21 Jun 2022

3040-01-701-6359
Spur Gearshaft

017016359
256T5527-1: RNCC: 3 | RNVC: 1

27 May 2022

3040-01-701-6081
Counterbalance Weight

017016081
952B928-10: RNCC: 3 | RNVC: 2

26 May 2022

3040-01-701-1582
Spur Gearshaft

017011582
0693-10002-101: RNCC: 3 | RNVC: 2

29 Apr 2022

3040-01-698-3901
Worm Wheel Gearshaft

016983901
50500-0200/50135-0222: RNCC: 3 | RNVC: 2

15 Nov 2021

3040-01-700-9226
Piston Ring

017009226
137698: RNCC: 3 | RNVC: 2
71881800 PL: RNCC: D | RNVC: 9
71881800 REV- POS 0024: RNCC: D | RNVC: 9

20 Apr 2022

3040-01-699-1579
Nonaircraft Mechanical Actuator

016991579
CTORVO-000328: RNCC: 3 | RNVC: 2
505-8787572 REV A (F11): RNCC: 5 | RNVC: 2
505-8787572 REV A: RNCC: D | RNVC: 9

12 Jan 2022

3040-01-701-4118
Straight Shaft

017014118
251T0101-504: RNCC: 3 | RNVC: 1

16 May 2022

3040-01-219-4795
Shouldered Shaft

012194795
656C0200K091A: RNCC: 3 | RNVC: 2
8656C0200K091A: RNCC: 3 | RNVC: 2
999R0178 PC 2-1: RNCC: 5 | RNVC: 2

26 Oct 1985

3040-01-700-7074
Brake Disc

017007074
HC3Z-1125-A: RNCC: 3 | RNVC: 9

8 Apr 2022

3040-01-700-7864
Housing Adapter

017007864
5802076648: RNCC: 3 | RNVC: 2

13 Apr 2022

3040-01-700-8485
Gearbox Parts Kit

017008485
2502000010: RNCC: 3 | RNVC: 2

16 Apr 2022

3040-01-699-7385
Gearshaft Set

016997385
14008886: RNCC: 3 | RNVC: 2
14000093: RNCC: C | RNVC: 1

23 Feb 2022

3040-01-698-7754
Nonaircraft Mechanical Actuator

016987754
30096-CC36605: RNCC: 3 | RNVC: 2
CC36605: RNCC: D | RNVC: 9

7 Dec 2021

3040-01-699-4534
Shouldered Axle

016994534
4360297: RNCC: 3 | RNVC: 2

1 Feb 2022

3040-01-699-3507
Shifter Shoe

016993507
185694: RNCC: 3 | RNVC: 2
20809078 REVISION C PIECE 6: RNCC: C | RNVC: 1
20809068: RNCC: D | RNVC: 9

25 Jan 2022

3040-01-700-0056
Multiple Gears Gearshaft

017000056
4525016: RNCC: 3 | RNVC: 2

11 Mar 2022

3040-01-699-8870
Rigid Connecting Link

016998870
123BM97139-3: RNCC: 3 | RNVC: 2

4 Mar 2022

3040-01-686-8658
Rigid Connecting Link

016868658
444-001-002-105: RNCC: 3 | RNVC: 2
444-001-002-101: RNCC: 5 | RNVC: 9

9 Mar 2020

3040-01-682-4341
Nonaircraft Mechanical Actuator

016824341
721-8541919-24: RNCC: 3 | RNVC: 2
721-8541924-A2TR: RNCC: 5 | RNVC: 2
R8611501-24: RNCC: C | RNVC: 1
R8611506-A2: RNCC: C | RNVC: 1
721-8541924-A2: RNCC: C | RNVC: 1

7 Aug 2019

3040-01-691-4828
Tongue Cylinder

016914828
936538: RNCC: 1 | RNVC: 2
100210B: RNCC: 3 | RNVC: 2
100298B: RNCC: 3 | RNVC: 2

13 Oct 2020

3040-01-424-7594
Linear Actuating Cylinder

014247594
USN01419: RNCC: 3 | RNVC: 2
22-07168: RNCC: 3 | RNVC: 9
USN01419: RNCC: 5 | RNVC: 2
USN01419: RNCC: 5 | RNVC: 2
USN01419: RNCC: 5 | RNVC: 2
589-6953106: RNCC: 5 | RNVC: 9
22-07168: RNCC: C | RNVC: 1
589-6953106: RNCC: C | RNVC: 1

5 Feb 1996

3040-00-945-6397
Rigid Connecting Link

009456397
NAS356: RNCC: 3 | RNVC: 1
NAS356-81-1050: RNCC: 3 | RNVC: 2

1 Mar 1966

3040-01-641-5830
Latch Interlock Assembly

016415830
100-7108435-B1: RNCC: 3 | RNVC: 1
H547-0290-B1: RNCC: 5 | RNVC: 1
H547-1720-1: RNCC: 5 | RNVC: 1
7383858-H5470290-0B1: RNCC: 5 | RNVC: 1
H547-0001-H5470290-0B1: RNCC: 5 | RNVC: 1
167-7107409-1: RNCC: 5 | RNVC: 1
167-7107409-1L1: RNCC: 5 | RNVC: 2
7383858-H5470290-0B1L1: RNCC: 5 | RNVC: 2
H547-0001-H5470290-0B1L1: RNCC: 5 | RNVC: 2
H547-0290-B1L1: RNCC: 5 | RNVC: 2

27 Jan 2015

3040-01-543-3358
Straight Shaft

015433358
3T4011: RNCC: 3 | RNVC: 2
3T-4011: RNCC: 5 | RNVC: 2

8 Sep 2006

3040-00-541-1560
Ball Joint

005411560
109408: RNCC: 3 | RNVC: 9
5164321: RNCC: 5 | RNVC: 2
D346-261: RNCC: 5 | RNVC: 2
109408: RNCC: 5 | RNVC: 2
109408: RNCC: 5 | RNVC: 2
G109408: RNCC: 5 | RNVC: 2
109408: RNCC: 5 | RNVC: 9
135X7: RNCC: 5 | RNVC: 9
5164321: RNCC: 5 | RNVC: 9
109408: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-224-9917
Shouldered Shaft

012249917
968251-00PH: RNCC: 3 | RNVC: 2
968251-00PH: RNCC: 3 | RNVC: 2
968251-00: RNCC: 3 | RNVC: 2
968251-00: RNCC: 3 | RNVC: 2
968251-00PH: RNCC: 3 | RNVC: 9
RY-167693 PC2: RNCC: 5 | RNVC: 1
RY-167693 PC2: RNCC: 5 | RNVC: 9
S6226-JZ-MMA-010 7-15-24: RNCC: 5 | RNVC: 9

25 Jan 1986

3040-01-641-7316
Shaft Collar

016417316
7550479-DF331473-0006: RNCC: 3 | RNVC: 1
7383858-DF331473-0006: RNCC: 5 | RNVC: 1
801-6406768 FIND 6: RNCC: 5 | RNVC: 1
G547-0003-DF331473-0006: RNCC: 5 | RNVC: 1
H547-0001-DF331473-0006: RNCC: 5 | RNVC: 1
DF331473 FIND 6: RNCC: 5 | RNVC: 1
211060922: RNCC: 5 | RNVC: 1
DF331473-0006: RNCC: 5 | RNVC: 1
211060922D4: RNCC: 5 | RNVC: 2
801-6406768 FIND 6D4: RNCC: 5 | RNVC: 2

30 Jan 2015

3040-01-542-7623
Linear Actuating Cylinder

015427623
NP0623-1: RNCC: 3 | RNVC: 2
NP0623-1 (AUTH.DISTRIB.FOR 830Q4: RNCC: 3 | RNVC: 2
NP-623 PC 1: RNCC: 5 | RNVC: 9
NP-623-1: RNCC: 5 | RNVC: 9
NP-622 PC 103: RNCC: 5 | RNVC: 9

17 Aug 2006

3040-01-433-8324
Push-Pull Control Assembly

014338324
32377-003-27FT: RNCC: 3 | RNVC: 2
D038038-003-27FT: RNCC: 5 | RNVC: 2
33C-003-324IN: RNCC: 5 | RNVC: 2
5105638 PC 125: RNCC: 5 | RNVC: 2
32377-003-324: RNCC: 5 | RNVC: 2
33C-003-27FT: RNCC: 5 | RNVC: 2
D038038-003-324IN: RNCC: 5 | RNVC: 2
32377-003-324: RNCC: 5 | RNVC: 9
33C-003-324IN.: RNCC: 5 | RNVC: 9
33C-003-27FT: RNCC: 5 | RNVC: 9

11 Jul 1996

3040-01-643-9925
Shaft Operator

016439925
7383858-H5471721-053: RNCC: 3 | RNVC: 1
167-7108111-53: RNCC: 5 | RNVC: 1
H547-0001-H5471721-053: RNCC: 5 | RNVC: 1
H547-1721-53: RNCC: 5 | RNVC: 1
7383858-7108111-53: RNCC: 5 | RNVC: 1
H5470001-H5471721-53: RNCC: 5 | RNVC: 1
167-7108111-53D4: RNCC: 5 | RNVC: 2
7383858-H5471721-053D4: RNCC: 5 | RNVC: 2
H547-0001-H5471721-053D4: RNCC: 5 | RNVC: 2
H547-1721-53D4: RNCC: 5 | RNVC: 2

17 Apr 2015

3040-01-642-4489
Ball Joint

016424489
167-7384258-91: RNCC: 3 | RNVC: 1
H5471905-091: RNCC: 5 | RNVC: 1
H547-1905-91: RNCC: 5 | RNVC: 1
7383858-H5471905-091: RNCC: 5 | RNVC: 1
H547-0001-H5471905-091: RNCC: 5 | RNVC: 1
7383858-H5471905-091D4: RNCC: 5 | RNVC: 2
H547-0001-H5471905-091D4: RNCC: 5 | RNVC: 2
H547-1905-91D4: RNCC: 5 | RNVC: 2
H5471905-091D4: RNCC: 5 | RNVC: 2
111-B-0027-2D4: RNCC: 5 | RNVC: 2

25 Feb 2015

3040-01-546-0718
Linear Actuating Cylinder Assembly

015460718
9241500001: RNCC: 3 | RNVC: 2
MP-0002721G: RNCC: 3 | RNVC: 2
924150.0001: RNCC: 5 | RNVC: 2
924150.0001: RNCC: 5 | RNVC: 2
CV185420: RNCC: 5 | RNVC: 2
A354530100: RNCC: E | RNVC: 8

5 Dec 2006

3040-00-446-7560
Thrust Bearing Shoe

004467560
462754PC1T03: RNCC: 3 | RNVC: 2
DD5781PC13: RNCC: 5 | RNVC: 2
27-29-19APC2T04: RNCC: 5 | RNVC: 2
27-29-19BPC2T04: RNCC: 5 | RNVC: 2
29-2754-1: RNCC: 5 | RNVC: 2
61098PC140MT140P: RNCC: 5 | RNVC: 2
801523PC1T03: RNCC: 5 | RNVC: 2
27-29-19BITEM2T04: RNCC: 5 | RNVC: 2
29-2754-1: RNCC: 5 | RNVC: 2
462754PC1T03: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-12-401-6128

3040-01-674-2367
Rigid Connecting Link

016742367
EB3Z5808A: RNCC: 3 | RNVC: 2
7423179364: RNCC: 5 | RNVC: 2
EB3C4264AB: RNCC: 5 | RNVC: 9

17 Jul 2018

3040-01-453-8976
Straight Shaft

014538976
211068971: RNCC: 3 | RNVC: 1
751-6402302 FIND6: RNCC: 5 | RNVC: 1
751-6402316 ITEM1: RNCC: 5 | RNVC: 1
751-6402301 ITEM6: RNCC: 5 | RNVC: 1
751-6402301 FIND 6: RNCC: 5 | RNVC: 1
211068971L1: RNCC: 5 | RNVC: 2
751-6402301 FIND 6L1: RNCC: 5 | RNVC: 2
751-6402302 FIND6L1: RNCC: 5 | RNVC: 2
751-6402302 ITEM 6L1: RNCC: 5 | RNVC: 2
751-6402301 ITEM6L1: RNCC: 5 | RNVC: 2

13 Mar 1998

3040-00-229-9000
Linear Actuating Cylinder Piston Rod

002299000
305475030: RNCC: 3 | RNVC: 2
20-07475-02: RNCC: 5 | RNVC: 9

28 Dec 1971

3040-01-702-8583
Straight Shaft

017028583
4003910: RNCC: 3 | RNVC: 2

2 Aug 2022

3040-00-216-8776
Worm Shaft

002168776
11-2LALT1PC28: RNCC: 3 | RNVC: 2
11-2DALT1PC28: RNCC: 3 | RNVC: 2
12-1FALT1PC28: RNCC: 3 | RNVC: 2
12-3EPC30: RNCC: 3 | RNVC: 2
12-3HALT1PC30: RNCC: 3 | RNVC: 2
12-3JPC30: RNCC: 3 | RNVC: 2
12-1KALT1PC28: RNCC: 3 | RNVC: 2
11-4DPC30: RNCC: 3 | RNVC: 2
12-3BPC30: RNCC: 3 | RNVC: 2
12-1HPC28: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-544-3389
Straight Shaft

015443389
751-7072601-7: RNCC: 3 | RNVC: 1
H821-0603-7: RNCC: 5 | RNVC: 1
751-7072604-7: RNCC: 5 | RNVC: 1
H821-0601-7: RNCC: 5 | RNVC: 1
H821-0602-7: RNCC: 5 | RNVC: 1
H821-0604-7: RNCC: 5 | RNVC: 1
7072614-1: RNCC: 5 | RNVC: 1
751-7072614-1: RNCC: 5 | RNVC: 1
751-7072602-7: RNCC: 5 | RNVC: 1
751-7072603-7: RNCC: 5 | RNVC: 1

11 Oct 2006

3040-01-670-4079
Shouldered Shaft

016704079
7550477-G5254201-04: RNCC: 3 | RNVC: 1
7384908 PN 4: RNCC: 5 | RNVC: 1
G5254201-04: RNCC: 5 | RNVC: 1
G547-0001-G5254201-04: RNCC: 5 | RNVC: 1
G525-4201 PN 4: RNCC: 5 | RNVC: 1
12100M501A: RNCC: 5 | RNVC: 1
G547-0001-G5254201-04D4: RNCC: 5 | RNVC: 2
G525-4201 PN 4D4: RNCC: 5 | RNVC: 2
12100M501AD4: RNCC: 5 | RNVC: 2
7384908 PN 4D4: RNCC: 5 | RNVC: 2

22 Feb 2018

3040-01-669-1420
Linear Actuating Cylinder Assembly

016691420
400/L7886: RNCC: 3 | RNVC: 2
332/F7185: RNCC: 5 | RNVC: 9

22 Dec 2017

3040-00-163-0371
Spur Gearshaft

001630371
19609: RNCC: 3 | RNVC: 2
A1210PC45: RNCC: 5 | RNVC: 2
A1211PC45: RNCC: 5 | RNVC: 2
A907PC45: RNCC: 5 | RNVC: 2
A914PC45: RNCC: 5 | RNVC: 2
A915PC45: RNCC: 5 | RNVC: 2
A906PC45: RNCC: 5 | RNVC: 2
99119609: RNCC: 5 | RNVC: 2
A1116PC45: RNCC: 5 | RNVC: 2
A1126PC45: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-216-0944
Spur Gearshaft

012160944
2642-343-12 ITEM 6: RNCC: 3 | RNVC: 2
845-5765823-0006: RNCC: 5 | RNVC: 2
845-5765824-0004: RNCC: 5 | RNVC: 2
2642-343-13 ITEM 6: RNCC: 5 | RNVC: 2
2642-343-12 ITEM 6: RNCC: 5 | RNVC: 9
2642-343-12 ITEM 6: RNCC: 5 | RNVC: 9
576584-0006: RNCC: C | RNVC: 1
2642-343-12: RNCC: D | RNVC: 9
2642-343-13: RNCC: D | RNVC: 9
845-5765824: RNCC: D | RNVC: 9

6 Sep 1985

3040-00-149-2170
Thrust Bearing Shoe

001492170
8-3153-7: RNCC: 3 | RNVC: 2
8-3153-7: RNCC: 5 | RNVC: 2
41J245PC7T09: RNCC: 5 | RNVC: 2
19F234PC1: RNCC: 5 | RNVC: 2
463152PC7T09: RNCC: 5 | RNVC: 2
M19F234PC1: RNCC: 5 | RNVC: 2
362848PC7T09: RNCC: 5 | RNVC: 2
41J244PC7T09: RNCC: 5 | RNVC: 2
463153PC7T09: RNCC: 5 | RNVC: 2
10G301PC1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-454-3221
Linear Actuating Cylinder Assembly

014543221
3798328-2: RNCC: 3 | RNVC: 2
751-6402401-66: RNCC: 5 | RNVC: 2
211076068: RNCC: 5 | RNVC: 2
751-6402402 ITEM 66: RNCC: 5 | RNVC: 2
751-6402409 ITEM 1: RNCC: 5 | RNVC: 2
751-6402402-66: RNCC: 5 | RNVC: 2
751-6402408-66: RNCC: C | RNVC: 1
751-6402403-66: RNCC: C | RNVC: 1
751-6402401 FIND 66: RNCC: C | RNVC: 1
751-6402406 ITEM 66: RNCC: C | RNVC: 1

26 Mar 1998

3040-01-580-1294
Rigid Connecting Link

015801294
9W2822: RNCC: 3 | RNVC: 2
9W-2822: RNCC: 5 | RNVC: 2

4 Dec 2009

3040-01-474-3767
Rotary Electro-Mechanical Actuator

014743767
4086390: RNCC: 1 | RNVC: 3
442043: RNCC: 3 | RNVC: 3
442043-2: RNCC: 5 | RNVC: 3

2 May 2000

3040-01-398-5289
Linear Actuating Cylinder Assembly Parts Kit

013985289
211052018: RNCC: 3 | RNVC: 1
6401267 IT 136: RNCC: 5 | RNVC: 1
6401440-1: RNCC: 5 | RNVC: 1
595-6401440 ITEM 1: RNCC: 5 | RNVC: 1
595-6401440-1: RNCC: 5 | RNVC: 1
595-6401267 ITEM 136: RNCC: 5 | RNVC: 1
595-6401440-1L1: RNCC: 5 | RNVC: 2
6401267IT 136L1: RNCC: 5 | RNVC: 2
6401440-1L1: RNCC: 5 | RNVC: 2
595-6401440 ITEM 1L1: RNCC: 5 | RNVC: 2

4 Nov 1994

3040-01-220-5429
Shouldered Shaft

012205429
J180818: RNCC: 3 | RNVC: 2
C20035D135: RNCC: 5 | RNVC: 9
C20035D135A: RNCC: C | RNVC: 1

16 Nov 1985

3040-00-146-9143
Spur Gearshaft

001469143
6005: RNCC: 3 | RNVC: 2
D15-600UPC528: RNCC: 3 | RNVC: 2
D15-648AAPC608: RNCC: 3 | RNVC: 2
D15-648BPC608: RNCC: 3 | RNVC: 2
D15-548PPC528: RNCC: 3 | RNVC: 2
D15-548SPC528: RNCC: 3 | RNVC: 2
D15-548TPC528: RNCC: 3 | RNVC: 2
D15-600BPC528: RNCC: 3 | RNVC: 2
D15-600WPC528: RNCC: 3 | RNVC: 2
D15-648XPC608: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-145-2769
Pawl

001452769
1278B: RNCC: 3 | RNVC: 2
1278B: RNCC: 3 | RNVC: 9
1278B: RNCC: 5 | RNVC: 9
111211PC126: RNCC: 5 | RNVC: 9
111023PC123: RNCC: 5 | RNVC: 9
111111PC126: RNCC: 5 | RNVC: 9
101028PC126: RNCC: 5 | RNVC: 9
101011PC126: RNCC: 5 | RNVC: 9
107224PC123: RNCC: 5 | RNVC: 9
107511PC126: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-129-6353
Bell Crank Support

001296353
318208: RNCC: 3 | RNVC: 2
70357HPC70966C: RNCC: 5 | RNVC: 2
NP71922ESPC28: RNCC: 5 | RNVC: 2
331320SH1ITEM15: RNCC: 5 | RNVC: 2
70327PC70966C: RNCC: 5 | RNVC: 2
70329PC70966C: RNCC: 5 | RNVC: 2
70966C: RNCC: 5 | RNVC: 2
NP71920ESPC28: RNCC: 5 | RNVC: 2
NP71921ESPC28: RNCC: 5 | RNVC: 2
70329PC70966C: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-407-6063
Linear Actuating Cylinder Assembly

014076063
SR-503-DV: RNCC: 3 | RNVC: 2
SR-503-D-V: RNCC: 3 | RNVC: 9
35916: RNCC: 5 | RNVC: 9

31 Jan 1995

3040-00-097-0983
Shaft Collar

000970983
Y10: RNCC: 3 | RNVC: 2
55-22381-72: RNCC: 5 | RNVC: 2
R136PC26: RNCC: 5 | RNVC: 9
R390PC26: RNCC: 5 | RNVC: 9
R140PC26: RNCC: 5 | RNVC: 9
R142PC26: RNCC: 5 | RNVC: 9
R143ITEM6A: RNCC: 5 | RNVC: 9
R129PC26: RNCC: 5 | RNVC: 9
R131PC26: RNCC: 5 | RNVC: 9
R138PC26: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-186-3356
Single Disk Brake

011863356
108766200HLB: RNCC: 3 | RNVC: 2
1087766200HLB: RNCC: 5 | RNVC: 9
1087662H0HLB: RNCC: 5 | RNVC: 9
1-087-662-H0-HL: RNCC: C | RNVC: 1

9 Aug 1984

3040-01-675-7500
Shaft Lower

016757500
E541-0252-62: RNCC: 3 | RNVC: 1
36-37-7818KS: RNCC: 5 | RNVC: 1
167-8483300-62: RNCC: 5 | RNVC: 1
8483300-62-MOD36-37-7818KS: RNCC: 5 | RNVC: 1
167-8483300-62L1: RNCC: 5 | RNVC: 2
36-37-7818KSL1: RNCC: 5 | RNVC: 2
8483300-62-MOD36-37-7818KSL1: RNCC: 5 | RNVC: 2
E541-0252-62L1: RNCC: 5 | RNVC: 2

25 Sep 2018

3040-01-454-5123
Straight Shaft

014545123
751-6402951 ITEM 1: RNCC: 3 | RNVC: 2
751-6402401-52: RNCC: C | RNVC: 1
751-6402402 ITEM 52: RNCC: C | RNVC: 1
751-6402403-52: RNCC: C | RNVC: 1
751-6402407 FIND 52: RNCC: C | RNVC: 1
751-6402406 ITEM 52: RNCC: C | RNVC: 1
751-6402407-52: RNCC: C | RNVC: 1
751-6402404 ITEM 52: RNCC: C | RNVC: 1
751-6402405-52: RNCC: C | RNVC: 1
751-6402403 FIND 52: RNCC: C | RNVC: 1

2 Apr 1998

3040-01-669-1028
Rigid Connecting Link

016691028
140442: RNCC: 3 | RNVC: 2
140442: RNCC: 5 | RNVC: 2
62400-0017E01: RNCC: 5 | RNVC: 9
62400-0017E01: RNCC: 7 | RNVC: 2

20 Dec 2017

3040-01-614-9782
Breather

016149782
339-1048: RNCC: 3 | RNVC: 2
339-1048: RNCC: 5 | RNVC: 2
10464058: RNCC: 6 | RNVC: 9

20 Dec 2012

3040-01-474-3768
Rotary Electro-Mechanical Actuator

014743768
4086391: RNCC: 1 | RNVC: 3
442044: RNCC: 3 | RNVC: 3
442044-4: RNCC: 5 | RNVC: 3

2 May 2000

3040-01-703-1445
Straight Shaft

017031445
4011-6: RNCC: 3 | RNVC: 2

19 Aug 2022

3040-01-703-0200
Planetary Gears Carrier

017030200
29501047: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-00-036-3415
Turbine And P Shaft

000363415
29163: RNCC: 3 | RNVC: 9
CA6463PC532: RNCC: 5 | RNVC: 2
CA6877PC532: RNCC: 5 | RNVC: 2
CA6466PC532: RNCC: 5 | RNVC: 2
CA6461-532: RNCC: 5 | RNVC: 2
E3133PC191: RNCC: 5 | RNVC: 9
CA6877PC532: RNCC: 5 | RNVC: 9
CA6463PC532: RNCC: 5 | RNVC: 9
E2810PC191: RNCC: 5 | RNVC: 9
E2802PC191: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-702-4926
Control Cam

017024926
1159LM51032-11: RNCC: 3 | RNVC: 2

11 Jul 2022

3040-01-707-5257
Straight Shaft Assembly

017075257
LAN-11-803-WAD: RNCC: 3 | RNVC: 2

7 Feb 2023

3040-01-707-5993
Spur Gearshaft

017075993
X0606-01036-101: RNCC: 3 | RNVC: 2
X0606-01036: RNCC: D | RNVC: 9
PL X0606-01036: RNCC: D | RNVC: 9

10 Feb 2023

3040-01-706-3066
Piston Ring

017063066
F.US200208.25.3: RNCC: 3 | RNVC: 2

15 Nov 2022

3040-01-707-5238
Straight Shaft Assembly

017075238
LAN-11-802-WAD: RNCC: 3 | RNVC: 2

7 Feb 2023

3040-01-706-8530
Ball Joint

017068530
7082422: RNCC: 3 | RNVC: 2

23 Dec 2022

3040-01-706-8485
Push-Pull Control Assembly

017068485
21V42DF-3-84: RNCC: 3 | RNVC: 2

22 Dec 2022

3040-01-701-5227
Shouldered Shaft

017015227
4000-6182: RNCC: 3 | RNVC: 2
798C-10017 SHEET 2 OF 4: RNCC: 5 | RNVC: 2
506-90-23: RNCC: 5 | RNVC: 9

20 May 2022

3040-01-706-0026
Manual Control Lever Assembly

017060026
725-8838197-A4: RNCC: 3 | RNVC: 2
LOA007265-A4: RNCC: 5 | RNVC: 2

24 Oct 2022

3040-01-707-4500
Pawl

017074500
474622200171: RNCC: 3 | RNVC: 2

2 Feb 2023

3040-01-707-6453
Shaft Collar

017076453
W211323-625: RNCC: 3 | RNVC: 2
KGW211323-625: RNCC: 5 | RNVC: 2
AP00192-14: RNCC: 5 | RNVC: 2

14 Feb 2023

3040-01-707-4656
Straight Shaft

017074656
13071333: RNCC: 3 | RNVC: 2

3 Feb 2023

3040-01-706-7927
Counterbalance Weight

017067927
6539155-2: RNCC: 3 | RNVC: 2

19 Dec 2022

3040-00-385-9483
Worm Shaft

003859483
1503398: RNCC: 3 | RNVC: 2
G7852PC84: RNCC: 5 | RNVC: 2
W65N7X1: RNCC: 5 | RNVC: 2
26J291PC120: RNCC: 5 | RNVC: 2
26J295PC103: RNCC: 5 | RNVC: 2
800840PC84: RNCC: 5 | RNVC: 2
1503398: RNCC: 5 | RNVC: 2
700404PC84: RNCC: 5 | RNVC: 2
800836PC84: RNCC: 5 | RNVC: 2
800840PC84: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-153-7662
Straight Shaft

001537662
W1223-3: RNCC: 3 | RNVC: 9
AB0070101401: RNCC: 5 | RNVC: 2
07-811H163: RNCC: 5 | RNVC: 2
W1223-3: RNCC: 5 | RNVC: 2
07-101401: RNCC: 5 | RNVC: 2
101401: RNCC: 5 | RNVC: 2
07-811H163: RNCC: 5 | RNVC: 9
AB0070101401: RNCC: 5 | RNVC: 9
62-2: RNCC: 5 | RNVC: 9
101401: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-614-7677
Remote Control Lever

016147677
6D69470H08: RNCC: 3 | RNVC: 2
6D69470-8: RNCC: 5 | RNVC: 9
6D69470H083: RNCC: 5 | RNVC: 9

14 Dec 2012

3040-01-613-2293
Shaft Retaining Plate

016132293
31.03.12.024H: RNCC: 3 | RNVC: 2
310312024H: RNCC: 3 | RNVC: 9
31.03.12.024H: RNCC: 5 | RNVC: 9

2 Nov 2012

3040-00-360-3902
Hub Clamp

003603902
4B4715: RNCC: 3 | RNVC: 2
117: RNCC: 3 | RNVC: 2
X117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
18Z94: RNCC: 5 | RNVC: 2
0P691: RNCC: 5 | RNVC: 2
TDC117: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-422-5622
Shouldered Shaft

004225622
AC3263-1: RNCC: 3 | RNVC: 9
3N82ALT1PC637: RNCC: 5 | RNVC: 9
3N83ALT1PC637: RNCC: 5 | RNVC: 9
3N111PC637: RNCC: 5 | RNVC: 9
3N112PC637: RNCC: 5 | RNVC: 9
3N21-2PC637: RNCC: 5 | RNVC: 9
3N40PC637: RNCC: 5 | RNVC: 9
3N73PC637: RNCC: 5 | RNVC: 9
3N77PC637: RNCC: 5 | RNVC: 9
3N80PC637: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-193-4614
Reduction Wormshaft

011934614
10308/40/1 SDO: RNCC: 3 | RNVC: 2
R22-4RD01/40-1: RNCC: 3 | RNVC: 2
RW1/820358 PC 36: RNCC: 5 | RNVC: 2

3 Nov 1984

3040-01-352-3837
Flexible Shaft Assembly Casing

013523837
446900-1E-44: RNCC: 3 | RNVC: 2
5818152-44: RNCC: 5 | RNVC: 2
HXOSH12AZ1: RNCC: 5 | RNVC: 2
3040013523837: RNCC: 5 | RNVC: 9
1867920: RNCC: 7 | RNVC: 2
1867920: RNCC: 7 | RNVC: 9

25 Jan 1992

3040-00-976-4718
Linear Actuating Cylinder Piston

009764718
607024: RNCC: 3 | RNVC: 2
607024: RNCC: 3 | RNVC: 9
291ND5063: RNCC: 5 | RNVC: 2
ND5063PC291: RNCC: 5 | RNVC: 2
291ND5063: RNCC: 5 | RNVC: 9
607024: RNCC: 5 | RNVC: 9
ND5063PC291: RNCC: 5 | RNVC: 9
607024: RNCC: 5 | RNVC: 9
ND5063PC291: RNCC: 5 | RNVC: 9
291ND5063: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-201-6160
Manual Control Lever

012016160
3750AS700-14: RNCC: 3 | RNVC: 2
PDG7846-1: RNCC: 3 | RNVC: 9

20 Feb 1985

3040-01-538-4889
Straight Shaft

015384889
5133806: RNCC: 3 | RNVC: 2
5133806: RNCC: 5 | RNVC: 2
5133806-NP: RNCC: 5 | RNVC: 2
10366844: RNCC: 6 | RNVC: 9

23 Mar 2006

3040-01-553-0488
Linear Actuating Cylinder

015530488
3005482: RNCC: 3 | RNVC: 2
3005482 REV L: RNCC: 5 | RNVC: 2
3007968 REV N/CFIND NO.7: RNCC: 5 | RNVC: 2
3008022 REV A PC7: RNCC: 5 | RNVC: 2
3005484/FIND 6: RNCC: 5 | RNVC: 9
3005487/FIND 15: RNCC: 5 | RNVC: 9
3005482: RNCC: 5 | RNVC: 9

3 Jul 2007

3040-01-516-2390
Nonaircraft Mechanical Actuator

015162390
924012: RNCC: 3 | RNVC: 2
924012 (DISTRIBUTOR): RNCC: 3 | RNVC: 2
924012: RNCC: 3 | RNVC: 2
V5D10038-01: RNCC: 5 | RNVC: 2
V1E10526 ITEM 35: RNCC: 5 | RNVC: 2
924012: RNCC: 5 | RNVC: 9

24 Dec 2003

3040-01-702-7090
Rigid Connecting Link

017027090
1001-0201-500-001: RNCC: 3 | RNVC: 2
27-01-03 FIG 1 ITEM 1: RNCC: D | RNVC: 9
27-01-03 REV 0: RNCC: D | RNVC: 9

21 Jul 2022

3040-01-700-9527
Straight Shaft

017009527
470M132-1: RNCC: 3 | RNVC: 2

21 Apr 2022

3040-01-595-6486
Ballscrew Assembly

015956486
7383858-H5471906-002: RNCC: 3 | RNVC: 1
H547-0001-H5471906-002: RNCC: 5 | RNVC: 1
H5471906-002: RNCC: 5 | RNVC: 1
H547-1906-2: RNCC: 5 | RNVC: 1
167-7384259-2: RNCC: 5 | RNVC: 1
H547-0001-H5471906-002D4: RNCC: 5 | RNVC: 2
H547-1906-2D4: RNCC: 5 | RNVC: 2
H5471906-002D4: RNCC: 5 | RNVC: 2
167-7384259-2D4: RNCC: 5 | RNVC: 2
7383858-H5471906-002D4: RNCC: 5 | RNVC: 2

4 May 2011

3040-01-648-6931
Control Cable Assembly

016486931
CC34315: RNCC: 3 | RNVC: 2
307062: RNCC: 5 | RNVC: 2
000-33072-0375: RNCC: 5 | RNVC: 2
307062: RNCC: 5 | RNVC: 9

2 Oct 2015

3040-00-740-9781
Remote Control Lever

007409781
5239504: RNCC: 3 | RNVC: 2
PGF8938A: RNCC: 3 | RNVC: 2
0003436527: RNCC: 5 | RNVC: 2
3436527: RNCC: 5 | RNVC: 2
7409781: RNCC: 5 | RNVC: 2
5239504: RNCC: 5 | RNVC: 9
PGF8938: RNCC: 5 | RNVC: 9
PGF8938A: RNCC: 5 | RNVC: 9
1775N2: RNCC: 5 | RNVC: 9
KC9452: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-793-5151
Shouldered Shaft

007935151
737044: RNCC: 3 | RNVC: 2
12ND5014: RNCC: 5 | RNVC: 9
12ND6792: RNCC: 5 | RNVC: 9
ND6792PC12: RNCC: 5 | RNVC: 9
H-8413 PIECE 1: RNCC: 5 | RNVC: 9
NC-4215: RNCC: 5 | RNVC: 9
NH-6585 PIECE 12: RNCC: 5 | RNVC: 9
NH7407PC12: RNCC: 5 | RNVC: 9
737044: RNCC: C | RNVC: 1
12ND5014: RNCC: C | RNVC: 1

1 Jan 1962

3040-01-302-6683
Rigid Connecting Link

013026683
353 7646-002: RNCC: 3 | RNVC: 2
92048-991: RNCC: 3 | RNVC: 9
353 7646-002: RNCC: 5 | RNVC: 2
3537646-002: RNCC: 5 | RNVC: 2
012301: RNCC: 5 | RNVC: 2
HE012301: RNCC: 5 | RNVC: 2
92048-991: RNCC: 5 | RNVC: 9
3537646-002: RNCC: 5 | RNVC: 9

17 Jun 1989

3040-01-451-5800
Straight Shaft

014515800
211068972: RNCC: 3 | RNVC: 1
751-6402302 ITEM 5: RNCC: 5 | RNVC: 1
751-6402315-1: RNCC: 5 | RNVC: 1
751-6402301 ITEM5: RNCC: 5 | RNVC: 1
751-6402315 ITEM1: RNCC: 5 | RNVC: 1
211068972L1: RNCC: 5 | RNVC: 2
751-6402301 FIND 5L1: RNCC: 5 | RNVC: 2
751-6402302 FIND5: RNCC: 5 | RNVC: 2
751-6402302 ITEM 5L1: RNCC: 5 | RNVC: 2
751-6402301 ITEM5L1: RNCC: 5 | RNVC: 2

21 Dec 1997

3040-00-385-9488
Helical Gearshaft

003859488
W98AS: RNCC: 3 | RNVC: 9
G7613PC72: RNCC: 5 | RNVC: 2
G7939PC84: RNCC: 5 | RNVC: 2
G7988PC84: RNCC: 5 | RNVC: 2
G5965PC72: RNCC: 5 | RNVC: 2
G6628PC84: RNCC: 5 | RNVC: 2
G6634PC84: RNCC: 5 | RNVC: 2
G6726PC84: RNCC: 5 | RNVC: 2
G7641PC72: RNCC: 5 | RNVC: 2
G7657PC82: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-388-3733
Straight Shaft

003883733
72512: RNCC: 3 | RNVC: 2
130893: RNCC: 5 | RNVC: 2
842964: RNCC: 5 | RNVC: 2
8MTH7111: RNCC: 5 | RNVC: 9
71860R1: RNCC: 5 | RNVC: 9
72512: RNCC: 5 | RNVC: 9
D76036: RNCC: 5 | RNVC: 9
T98-3: RNCC: 5 | RNVC: 9
SK4444-3: RNCC: 5 | RNVC: 9
53704: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-476-0511
Linear Actuating Cylinder Assembly

014760511
9264717: RNCC: 3 | RNVC: 2
PG200674J: RNCC: 3 | RNVC: 9
9173705EX: RNCC: 5 | RNVC: 9
9173705JEK: RNCC: 5 | RNVC: 9
AT250456: RNCC: 5 | RNVC: 9

23 Jun 2000

3040-01-195-3663
Ball Joint

011953663
88911387: RNCC: 3 | RNVC: 2
9767112: RNCC: 5 | RNVC: 9
3986009: RNCC: 5 | RNVC: 9
9764615: RNCC: 5 | RNVC: 9
10268: RNCC: 5 | RNVC: 9
9762023: RNCC: 5 | RNVC: 9
339781: RNCC: 5 | RNVC: 9
339781: RNCC: 5 | RNVC: 9
9764615: RNCC: 5 | RNVC: 9
9767112: RNCC: 5 | RNVC: 9

28 Nov 1984

3040-00-420-2023
Positioning Shoe

004202023
S805JE3464: RNCC: 3 | RNVC: 2
SG2003PC16: RNCC: 5 | RNVC: 2
SG2185: RNCC: 5 | RNVC: 2
SG2188: RNCC: 5 | RNVC: 2
SG2191: RNCC: 5 | RNVC: 2
SG2194: RNCC: 5 | RNVC: 2
SG1736PC16: RNCC: 5 | RNVC: 2
SG1739PC16: RNCC: 5 | RNVC: 2
SG1741PC16: RNCC: 5 | RNVC: 2
SG1744PC16: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-706-3523
Flexible Drive Shaft

017063523
92361-05801-113: RNCC: 3 | RNVC: 2

17 Nov 2022

3040-01-706-3706
Gearbox Parts Kit

017063706
128-9691: RNCC: 3 | RNVC: 2

18 Nov 2022

3040-01-706-8385
Ball Joint

017068385
BH-40 LR II: RNCC: 3 | RNVC: 2

22 Dec 2022

3040-01-707-5488
Linear Actuating Cylinder

017075488
109-8832: RNCC: 3 | RNVC: 2

8 Feb 2023

3040-01-701-7482
Rigid Connecting Link

017017482
B001262L01003-1: RNCC: 3 | RNVC: 2

6 Jun 2022

3040-00-499-7145
Friction Lining

004997145
514510: RNCC: 3 | RNVC: 2
54J762ITEM3: RNCC: 5 | RNVC: 2
714798ITEM2: RNCC: 5 | RNVC: 2
S514510: RNCC: 5 | RNVC: 2
1JH624ITEM3: RNCC: 5 | RNVC: 2
35J738ITEM3: RNCC: 5 | RNVC: 2
35J739ITEM3: RNCC: 5 | RNVC: 2
45J684ITEM3: RNCC: 5 | RNVC: 2
S6307H3121098ITEM3: RNCC: 5 | RNVC: 2
AV14S2000-399218ITEM3: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-01-377-7423
Push-Pull Control Assembly

013777423
3009-075-1372: RNCC: 3 | RNVC: 2
032377-003-45FT: RNCC: 5 | RNVC: 9
33C45FT: RNCC: 5 | RNVC: 9
32377-003-45FT: RNCC: 5 | RNVC: 9
33-C-540IN: RNCC: 5 | RNVC: 9
D032377-003-45FT: RNCC: 5 | RNVC: 9
032377-003-45FT: RNCC: 5 | RNVC: 9
33C45FT: RNCC: 5 | RNVC: 9
D032377-003-45FT: RNCC: 5 | RNVC: 9
32377-003-45FT: RNCC: 5 | RNVC: 9

24 Jul 1993

3040-01-256-2255
Flexible Shaft Assembly

012562255
57714-02: RNCC: 3 | RNVC: 2
57714-2: RNCC: 5 | RNVC: 9

3 Jun 1987

3040-00-367-8843
Friction Lining

003678843
071Z8A: RNCC: 3 | RNVC: 2
6B1204: RNCC: 3 | RNVC: 2
112B10: RNCC: 3 | RNVC: 2
112B10: RNCC: 5 | RNVC: 2
07128: RNCC: 5 | RNVC: 2
07128A: RNCC: 5 | RNVC: 2
835107: RNCC: 5 | RNVC: 2
R14161-112B10: RNCC: 5 | RNVC: 9
112B10: RNCC: 5 | RNVC: 9
112B10: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-367-0174
Shaft Collar

003670174
A1A156A100PC39: RNCC: 3 | RNVC: 2
17Y2388PC39: RNCC: 5 | RNVC: 2
5000S4803-529926: RNCC: 5 | RNVC: 2
5000S4803-529926PC39: RNCC: 5 | RNVC: 2
S4803-465689PC39: RNCC: 5 | RNVC: 2
A1A156A103PC39: RNCC: 5 | RNVC: 2
A1A222A46PC39: RNCC: 5 | RNVC: 2
D6A27A: RNCC: 5 | RNVC: 2
A1A222A38PC39: RNCC: 5 | RNVC: 2
A1A156A100PC39: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-01-325-9081
Manual Control Lever

013259081
D305450 PIECE 87: RNCC: 3 | RNVC: 9
E108496 PIECE 87: RNCC: 5 | RNVC: 2
E108860 PIECE 87: RNCC: 5 | RNVC: 2
E108165 PIECE 87: RNCC: 5 | RNVC: 2
E108186 PIECE 87: RNCC: 5 | RNVC: 2
E108496 PIECE 87: RNCC: 5 | RNVC: 9
E108860 PIECE 87: RNCC: 5 | RNVC: 9
D105873: RNCC: 5 | RNVC: 9
E108165 PIECE 87: RNCC: 5 | RNVC: 9
E108186 PIECE 87: RNCC: 5 | RNVC: 9

13 Sep 1990

3040-00-820-1719
Shaft Collar

008201719
SC87MODIFIED: RNCC: 3 | RNVC: 1
7064165P1: RNCC: 3 | RNVC: 2
7064165P1: RNCC: 5 | RNVC: 9
7064165: RNCC: D | RNVC: 9
504-009: RNCC: E | RNVC: 8

1 Jan 1962

3040-01-395-4626
Control Cam

013954626
211051287: RNCC: 3 | RNVC: 1
211090179L1: RNCC: 5 | RNVC: 1
211051287L1: RNCC: 5 | RNVC: 1
211090179: RNCC: 5 | RNVC: 1
595-6401267 ITEM 82: RNCC: 5 | RNVC: 1
595-6401641 ASSEMBLY 99: RNCC: 5 | RNVC: 1
595-6401641-AY99: RNCC: 5 | RNVC: 1
6401267ITEM82: RNCC: 5 | RNVC: 1
595-6401267ITEM82L1: RNCC: 5 | RNVC: 1
595-6401641-AY99L1: RNCC: 5 | RNVC: 1

30 Aug 1994

3040-00-334-3751
Thrust Shoe

003343751
SG1034PC16: RNCC: 3 | RNVC: 2
SG1947PC16: RNCC: 3 | RNVC: 2
S805BB: RNCC: 3 | RNVC: 2
SG1791PC16: RNCC: 3 | RNVC: 2
SG1916PC16: RNCC: 3 | RNVC: 2
SG1919PC16: RNCC: 3 | RNVC: 2
SG1351PC16: RNCC: 3 | RNVC: 2
SG1788PC16: RNCC: 3 | RNVC: 2
S805BE: RNCC: 3 | RNVC: 2
3315A: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-700-4779
Counterbalance Weight

017004779
5127T65P01: RNCC: 3 | RNVC: 2

29 Mar 2022

3040-00-036-4010
Friction Lining

000364010
327461: RNCC: 3 | RNVC: 2
321225: RNCC: 5 | RNVC: 2
332407SH2ITEM3: RNCC: 5 | RNVC: 2
332366SH1ITEM46: RNCC: 5 | RNVC: 2
322044PC48: RNCC: 5 | RNVC: 2
322660PC71: RNCC: 5 | RNVC: 2
322661PC71: RNCC: 5 | RNVC: 2
322661PC71: RNCC: 5 | RNVC: 9
327461: RNCC: 5 | RNVC: 9
332366SH1ITEM46: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-768-1853
Worm Shaft

007681853
737121: RNCC: 3 | RNVC: 2
737121: RNCC: 3 | RNVC: 9
NH6714PC415: RNCC: 5 | RNVC: 9
NF6095PC415: RNCC: 5 | RNVC: 9
NH7407PC415: RNCC: 5 | RNVC: 9
NH6357PC415: RNCC: 5 | RNVC: 9
737121: RNCC: 5 | RNVC: 9
F3179389REVDPC415: RNCC: 5 | RNVC: 9
737121: RNCC: 5 | RNVC: 9
NH6688PC415: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-071-1228
Rigid Connecting Link

010711228
16K2857-3: RNCC: 3 | RNVC: 2
3040PL1960302: RNCC: 6 | RNVC: 9

29 Jan 1979

3040-00-398-8546
Shaft Retaining Plate

003988546
SK133650: RNCC: 3 | RNVC: 2
SL7774PC20: RNCC: 3 | RNVC: 2
SL7487PC75: RNCC: 3 | RNVC: 2
SL5683PC75: RNCC: 5 | RNVC: 2
SL4629PC75: RNCC: 5 | RNVC: 2
SL4630PC75: RNCC: 5 | RNVC: 2
SL5686PC75: RNCC: 5 | RNVC: 2
SL5840PC75: RNCC: 5 | RNVC: 2
SL5843PC75: RNCC: 5 | RNVC: 2
SL4201PC75: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-668-9050
Rigid Connecting Link

016689050
NAS356: RNCC: 3 | RNVC: 1
NAS356-84-1041: RNCC: 3 | RNVC: 2

12 Dec 2017

3040-00-395-0150
Shifter Shoe

003950150
V308PC241: RNCC: 3 | RNVC: 2
477-16F: RNCC: 3 | RNVC: 2
477-16F: RNCC: 5 | RNVC: 9
477-35PC477-16F: RNCC: 5 | RNVC: 9
478-124PC478-30T: RNCC: 5 | RNVC: 9
478-141PC478-30T: RNCC: 5 | RNVC: 9
478-143PC478-30T: RNCC: 5 | RNVC: 9
477-52PC477-16F: RNCC: 5 | RNVC: 9
477-58PC477-16F: RNCC: 5 | RNVC: 9
478-96PC478-30T: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-394-8718
Handwheel Shaft

003948718
25J553PC119: RNCC: 3 | RNVC: 2
28J373PC81: RNCC: 3 | RNVC: 2
28J398PC172: RNCC: 3 | RNVC: 2
1387578: RNCC: 3 | RNVC: 2
25J427PC119: RNCC: 3 | RNVC: 2
25J485PC81: RNCC: 3 | RNVC: 2
25J488PC26: RNCC: 3 | RNVC: 2
28J375PC26: RNCC: 3 | RNVC: 2
1387578: RNCC: 3 | RNVC: 2
25J641PC119: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-99-781-6230
Shouldered Shaft

997816230
001214168 SHEET 05: RNCC: 3 | RNVC: 2
001214168: RNCC: 5 | RNVC: 1
Z/520/0000/3023 SHEET 05: RNCC: 5 | RNVC: 1
Z/520/0000/3023/005: RNCC: 5 | RNVC: 1
Z/520/0000/3023 PART 203: RNCC: 5 | RNVC: 1
Z/520/0000/3023/05: RNCC: 5 | RNVC: 1
Z/520/0000/3023/203: RNCC: 5 | RNVC: 1
SSN13/Z/520/0000/3023 PART 203: RNCC: 5 | RNVC: 2
001214168/05: RNCC: 5 | RNVC: 2
001214168/201: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-01-220-0685
Disk Brake Shoe

012200685
J213204: RNCC: 3 | RNVC: 2
F520C001: RNCC: 5 | RNVC: 9

8 Nov 1985

3040-00-413-4243
Control Cam

004134243
N3-19851-196FM5101: RNCC: 3 | RNVC: 2
G9B3-45PC24: RNCC: 5 | RNVC: 2
N3-11336PC425: RNCC: 5 | RNVC: 2
N3-11337PC425: RNCC: 5 | RNVC: 2
N3-11372PC428: RNCC: 5 | RNVC: 2
N3-11382PC428: RNCC: 5 | RNVC: 2
N3-11386PC428: RNCC: 5 | RNVC: 2
N3-11479PC423: RNCC: 5 | RNVC: 2
N3-11695PC421: RNCC: 5 | RNVC: 2
N3-12285PC428: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-463-6970
Remote Control Lever

004636970
37341D: RNCC: 3 | RNVC: 2
4B4703: RNCC: 3 | RNVC: 2
103F: RNCC: 3 | RNVC: 2
XTD103F: RNCC: 5 | RNVC: 2
0P682: RNCC: 5 | RNVC: 2
11182: RNCC: 5 | RNVC: 2
3H0436: RNCC: 5 | RNVC: 2
NDP1011PC13: RNCC: 5 | RNVC: 2
1-366: RNCC: 5 | RNVC: 2
TD103F: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-399-4095
Thrust Bearing Shoe

003994095
28-2757-1: RNCC: 3 | RNVC: 2
462757BPC1T03: RNCC: 3 | RNVC: 2
462772BPC1T03: RNCC: 3 | RNVC: 2
462772PC1T03: RNCC: 3 | RNVC: 2
462772PC1T03: RNCC: 3 | RNVC: 2
700242PC1T03: RNCC: 5 | RNVC: 2
28-2757-1: RNCC: 5 | RNVC: 2
462757PC1T03: RNCC: 5 | RNVC: 2
28-2757-1: RNCC: 5 | RNVC: 2
462772BPC1T03: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-291-5847
Straight Shaft

012915847
A-15252: RNCC: 3 | RNVC: 2
A15252: RNCC: 3 | RNVC: 9
10-3010 ITEM 24: RNCC: 5 | RNVC: 9

30 Dec 1988

3040-01-451-5802
Straight Shaft

014515802
211033414: RNCC: 3 | RNVC: 1
751-6402313-1: RNCC: 5 | RNVC: 1
751-6402301 ITEM3: RNCC: 5 | RNVC: 1
751-6402302 ITEM 3: RNCC: 5 | RNVC: 1
751-6402302 FIND3: RNCC: 5 | RNVC: 1
751-6402313 ITEM1: RNCC: 5 | RNVC: 1
211033414L1: RNCC: 5 | RNVC: 2
751-6402301 FIND 3L1: RNCC: 5 | RNVC: 2
751-6402301 ITEM3L1: RNCC: 5 | RNVC: 2
751-6402302 FIND3L1: RNCC: 5 | RNVC: 2

21 Dec 1997

3040-01-451-3531
Shouldered Shaft

014513531
211033411: RNCC: 3 | RNVC: 1
751-6402301 FIND 7: RNCC: 5 | RNVC: 1
751-6402302 FIND 7: RNCC: 5 | RNVC: 1
751-6402301 ITEM 7: RNCC: 5 | RNVC: 1
751-6402317 ITEM1: RNCC: 5 | RNVC: 1
751-6402301 FIND 7L1: RNCC: 5 | RNVC: 2
211033411L1: RNCC: 5 | RNVC: 2
751-6402317 ITEM1: RNCC: 5 | RNVC: 2
751-6402317 ITEM1L1: RNCC: 5 | RNVC: 2
751-6402302 ITEM 7L1: RNCC: 5 | RNVC: 2

13 Dec 1997

3040-00-337-6979
Mechanical Drive Housing

003376979
8364436: RNCC: 3 | RNVC: 2
2530003376979: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-01-451-5798
Straight Shaft

014515798
211033415: RNCC: 3 | RNVC: 1
751-6402302-2: RNCC: 5 | RNVC: 1
751-6402301 ITEM 2: RNCC: 5 | RNVC: 1
751-6402302 ITEM 2: RNCC: 5 | RNVC: 1
751-6402312-1: RNCC: 5 | RNVC: 1
751-6402301-2: RNCC: 5 | RNVC: 1
751-6402302 FIND 2: RNCC: 5 | RNVC: 1
751-6402312 ITEM1: RNCC: 5 | RNVC: 1
751-6402312 ITEM1L1: RNCC: 5 | RNVC: 2
751-6402312-1L1: RNCC: 5 | RNVC: 2

21 Dec 1997

3040-00-399-4093
Thrust Bearing Shoe

003994093
21-2839-1: RNCC: 3 | RNVC: 2
261733: RNCC: 3 | RNVC: 2
32J645PC48: RNCC: 3 | RNVC: 2
462839A1T03: RNCC: 3 | RNVC: 2
462839A1T03: RNCC: 5 | RNVC: 2
462839PC1T03: RNCC: 5 | RNVC: 2
21-2839-1: RNCC: 5 | RNVC: 2
21-2839-1: RNCC: 5 | RNVC: 2
32J645PC48: RNCC: 5 | RNVC: 2
21-2839-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-127-3964
Thrust Bearing Shoe

001273964
175B46CX1: RNCC: 3 | RNVC: 2
175B46CX1: RNCC: 3 | RNVC: 9
217302PC46: RNCC: 5 | RNVC: 9
W156NT500X17PC46: RNCC: 5 | RNVC: 9
W156NT500X7PC46: RNCC: 5 | RNVC: 9
W254RTM500X5PC46: RNCC: 5 | RNVC: 9
215183PC66: RNCC: 5 | RNVC: 9
216878PC46: RNCC: 5 | RNVC: 9
217301ITEM4: RNCC: 5 | RNVC: 9
217301PC46: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-394-8357
Thrust Bearing Shoe

003948357
D15-621PPC640T0643: RNCC: 3 | RNVC: 2
461966BPC2T04: RNCC: 5 | RNVC: 2
461966CPC2T04: RNCC: 5 | RNVC: 2
462246BPC2T04: RNCC: 5 | RNVC: 2
462246CPC2T04: RNCC: 5 | RNVC: 2
462246PC2T04: RNCC: 5 | RNVC: 2
462752PC2T04: RNCC: 5 | RNVC: 2
462973PC732T0734: RNCC: 5 | RNVC: 2
5-2222-2: RNCC: 5 | RNVC: 2
5-2222-2: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-374-6076
Manual Control Lever

003746076
CA530: RNCC: 3 | RNVC: 9
4108P11: RNCC: 5 | RNVC: 2
10S0938: RNCC: 5 | RNVC: 2
1SJ15: RNCC: 5 | RNVC: 2
8B2205: RNCC: 5 | RNVC: 2
32430H: RNCC: 5 | RNVC: 9
2092229: RNCC: 5 | RNVC: 9
153404: RNCC: 5 | RNVC: 9
C530: RNCC: 5 | RNVC: 9
C530: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-391-6301
Wiper Shaft

003916301
KS1385WD5PC15A: RNCC: 3 | RNVC: 2
KS1385PD12-15: RNCC: 3 | RNVC: 2
KS1150DCSPC15: RNCC: 5 | RNVC: 2
KS1250APC15: RNCC: 5 | RNVC: 2
KS1381PC15: RNCC: 5 | RNVC: 2
KS1385PD10PC15: RNCC: 5 | RNVC: 2
KS1385PD11PC15A: RNCC: 5 | RNVC: 2
KS1350HPC15: RNCC: 5 | RNVC: 2
KS1350MPC15: RNCC: 5 | RNVC: 2
KS1285PD4PC15: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-454-2263
Bell Crank

004542263
007852670: RNCC: 3 | RNVC: 2
007852670: RNCC: 3 | RNVC: 9
533K316: RNCC: 5 | RNVC: 2
07-852670: RNCC: 5 | RNVC: 2
852670: RNCC: 5 | RNVC: 2
852670: RNCC: 5 | RNVC: 2
07-852670: RNCC: 5 | RNVC: 9
852670: RNCC: 5 | RNVC: 9
852670: RNCC: 5 | RNVC: 9
155960: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-388-6888
Manual Control Lever

003886888
D15-655P123: RNCC: 3 | RNVC: 2
D15-661BPC123: RNCC: 3 | RNVC: 2
D15-661IPC123: RNCC: 3 | RNVC: 2
D15-661JPC123: RNCC: 3 | RNVC: 2
34816: RNCC: 3 | RNVC: 2
D15-661FPC123: RNCC: 5 | RNVC: 2
D15-394IPC123: RNCC: 5 | RNVC: 9
D15-394JPC123: RNCC: 5 | RNVC: 9
D15-443BPC123: RNCC: 5 | RNVC: 9
D15-443FPC123: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-447-8831
Shaft Retaining Plate

004478831
A1181: RNCC: 3 | RNVC: 2
321792: RNCC: 5 | RNVC: 2
62995D: RNCC: 5 | RNVC: 2
C107SP5PCA1181: RNCC: 5 | RNVC: 2
A1181: RNCC: 5 | RNVC: 2
X8317PCA1181: RNCC: 5 | RNVC: 9
X8317SPCA1181: RNCC: 5 | RNVC: 9
Z433PCA1181: RNCC: 5 | RNVC: 9
321792: RNCC: 5 | RNVC: 9
Z92: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-374-3899
Body Hub

003743899
676240: RNCC: 3 | RNVC: 9
5520E5004: RNCC: 5 | RNVC: 2
07-863624: RNCC: 5 | RNVC: 2
4C5031: RNCC: 5 | RNVC: 2
863624: RNCC: 5 | RNVC: 2
676240: RNCC: 5 | RNVC: 9
1121706: RNCC: 5 | RNVC: 9
1121706: RNCC: 5 | RNVC: 9
07-863624: RNCC: 5 | RNVC: 9
1121706: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-432-1945
Remote Control Lever

004321945
3048296: RNCC: 3 | RNVC: 2
AR51324: RNCC: 5 | RNVC: 9
AR6414: RNCC: 5 | RNVC: 9
AR-06413: RNCC: 5 | RNVC: 9
173718: RNCC: 5 | RNVC: 9
BM94851: RNCC: 5 | RNVC: 9
3024165: RNCC: 5 | RNVC: 9
AR51323: RNCC: 5 | RNVC: 9
173709: RNCC: 5 | RNVC: 9
3025539: RNCC: 5 | RNVC: 9

3 May 1971

3040-00-420-2011
Positioning Shoe

004202011
S805EE: RNCC: 3 | RNVC: 2
SG2154PC16: RNCC: 5 | RNVC: 9
S805EE: RNCC: 5 | RNVC: 9
SG1973PC16: RNCC: 5 | RNVC: 9
SG2042PC16: RNCC: 5 | RNVC: 9
SG2092PC16: RNCC: 5 | RNVC: 9
SG1746PC16: RNCC: 5 | RNVC: 9
SG1971PC16: RNCC: 5 | RNVC: 9
SG1881PC16: RNCC: 5 | RNVC: 9
SG1937PC16: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-12-419-7895

3040-01-393-7690
Linear Actuating Cylinder Assembly Parts Kit

013937690
211050269: RNCC: 3 | RNVC: 1
595-6401267 ITEM 141: RNCC: 5 | RNVC: 1
595-6401441 ITEM 1: RNCC: 5 | RNVC: 1
6401267 ITEM 141: RNCC: 5 | RNVC: 1
595-6401441-1: RNCC: 5 | RNVC: 1
6501267 IT 141: RNCC: 5 | RNVC: 1
6401441-1: RNCC: 5 | RNVC: 1
211050269L1: RNCC: 5 | RNVC: 2
595-6401441 ITEM 1L1: RNCC: 5 | RNVC: 2
595-6401441-1L1: RNCC: 5 | RNVC: 2

27 Jul 1994

3040-00-528-1998
Friction Lining

005281998
40-641: RNCC: 3 | RNVC: 2
SN3557PCDD5936: RNCC: 5 | RNVC: 2
NP4016-1PC4D: RNCC: 5 | RNVC: 2
NP4016-1PC51: RNCC: 5 | RNVC: 2
NP4016PC4D: RNCC: 5 | RNVC: 2
14U1466PCDD5936: RNCC: 5 | RNVC: 2
27U6421PC4D: RNCC: 5 | RNVC: 2
27U6421PC51: RNCC: 5 | RNVC: 2
27U6538PC51: RNCC: 5 | RNVC: 2
27U6420PC4D: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-532-3862
Linear Actuating Cylinder Piston

005323862
8689336: RNCC: 3 | RNVC: 2
3040005323862: RNCC: 6 | RNVC: 9
1015005323862: RNCC: 6 | RNVC: 9

1 Jan 1963

3040-01-666-8243
Worm Shaft

016668243
P00060-1BT: RNCC: 3 | RNVC: 2
P 00060-1BT: RNCC: 5 | RNVC: 2

21 Sep 2017

3040-01-388-7101
Linear Actuating Cylinder Assembly

013887101
509E211RY/GP6 FACTORY ENGINEERIN: RNCC: 3 | RNVC: 2
509E211RY/GP6: RNCC: 3 | RNVC: 2
AS509E211RYG-6: RNCC: 3 | RNVC: 2
509E211RY/GP1: RNCC: 3 | RNVC: 9

6 Apr 1994

3040-00-410-9601
Remote Control Lever

004109601
B7TZ7A256A: RNCC: 3 | RNVC: 9
1797494: RNCC: 5 | RNVC: 2
897337R91: RNCC: 5 | RNVC: 2
6757361: RNCC: 5 | RNVC: 2
10863146: RNCC: 5 | RNVC: 2
4234T2: RNCC: 5 | RNVC: 9
897337R91: RNCC: 5 | RNVC: 9
897337R91: RNCC: 5 | RNVC: 9
867669: RNCC: 5 | RNVC: 9
B7TZ7A256A: RNCC: 5 | RNVC: 9

15 Aug 1969

3040-01-703-0913
Planetary Gears Carrier

017030913
29544813: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-01-701-8578
Remote Control Lever

017018578
6147085: RNCC: 3 | RNVC: 2

13 Jun 2022

3040-00-127-3965
Set Shoe

001273965
Y175B47CX1-142/165-002: RNCC: 3 | RNVC: 2
Y175B47CX1-142/165-002: RNCC: 3 | RNVC: 9
W254RTM500X5PC47: RNCC: 5 | RNVC: 9
W254RTM500X6PC47: RNCC: 5 | RNVC: 9
Y175B47CX1-229: RNCC: 5 | RNVC: 9
216850PC47: RNCC: 5 | RNVC: 9
Y242302: RNCC: 5 | RNVC: 9
W156NT500X17PC47: RNCC: 5 | RNVC: 9
W242316PC47: RNCC: 5 | RNVC: 9
217301ITEM5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-7714
Multiple Gears Gearshaft

007347714
10092R1: RNCC: 3 | RNVC: 2
62-30-9: RNCC: 5 | RNVC: 2
T406-3: RNCC: 5 | RNVC: 2
100092R1: RNCC: 5 | RNVC: 2
7347714: RNCC: 5 | RNVC: 2
62-30-9: RNCC: 5 | RNVC: 2
2345414: RNCC: 5 | RNVC: 9
100092R1: RNCC: 5 | RNVC: 9
316696: RNCC: 5 | RNVC: 9
801E679: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-216-9286
Thrust Bearing Shoe

002169286
462503BPC5T07: RNCC: 3 | RNVC: 2
6 1-4-2503-5: RNCC: 3 | RNVC: 2
61-4-2503-5: RNCC: 3 | RNVC: 2
462503AP5: RNCC: 5 | RNVC: 2
W5928159PC5T07: RNCC: 5 | RNVC: 2
6 1-4 2503-5: RNCC: 5 | RNVC: 2
W5938253PC35: RNCC: 5 | RNVC: 2
262629CPC5T07: RNCC: 5 | RNVC: 2
462503DPC5T07: RNCC: 5 | RNVC: 2
462504CPC5T07: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-499-3479
Shouldered Shaft

004993479
A5783: RNCC: 3 | RNVC: 2
5164460: RNCC: 5 | RNVC: 9
18438PCA5783: RNCC: 5 | RNVC: 9
X8708APC81: RNCC: 5 | RNVC: 9
N32250PC81: RNCC: 5 | RNVC: 9
5164460: RNCC: 5 | RNVC: 9
5164460: RNCC: 5 | RNVC: 9
N1062PCA5783: RNCC: 5 | RNVC: 9
5164460: RNCC: 5 | RNVC: 9
X8708APCA5783: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-177-9293
Rigid Connecting Link

001779293
8754274: RNCC: 3 | RNVC: 2
3040001779293: RNCC: 5 | RNVC: 9

29 Jan 1969

3040-01-702-4547
Control Cam

017024547
1159LM51032-12: RNCC: 3 | RNVC: 2
1159LM51032-16: RNCC: 3 | RNVC: 2
1159LM51032-15: RNCC: 3 | RNVC: 2

7 Jul 2022

3040-00-467-9846
Shouldered Shaft

004679846
232-49: RNCC: 3 | RNVC: 9
4801-521854PC27: RNCC: 5 | RNVC: 2
4801-593942PC27: RNCC: 5 | RNVC: 2
4801-877643PC27: RNCC: 5 | RNVC: 2
S4801-593942PC27: RNCC: 5 | RNVC: 2
S4801-877643PC27: RNCC: 5 | RNVC: 2
232-49KM0NEL: RNCC: 5 | RNVC: 9
232-20PC27: RNCC: 5 | RNVC: 9
232-49PCALL: RNCC: 5 | RNVC: 9
236-20PC27: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-176-0588
Rigid Connecting Link

011760588
LA64012PIECE8.44: RNCC: 3 | RNVC: 2
LA-64120: RNCC: 3 | RNVC: 2
LA64012-25PIECE8.44: RNCC: 5 | RNVC: 2
LA64012-25PIECE8.44: RNCC: 5 | RNVC: 9
LA-64120: RNCC: 5 | RNVC: 9
LA64012PIECE8.44: RNCC: 5 | RNVC: 9
LA64012-25PIECE8.44: RNCC: 5 | RNVC: 9
LA64012PIECE8.44: RNCC: 5 | RNVC: 9
LA-64120: RNCC: 5 | RNVC: 9
LA64012-25PIECE8.44: RNCC: 5 | RNVC: 9

7 Apr 1984

3040-00-469-1106
Shaft Collar

004691106
1503: RNCC: 3 | RNVC: 2
AB4651-1: RNCC: 3 | RNVC: 9
3N46PC1503: RNCC: 5 | RNVC: 9
3N47ALT6PC1503: RNCC: 5 | RNVC: 9
3N48ALT6PC1503: RNCC: 5 | RNVC: 9
3N69PC1503: RNCC: 5 | RNVC: 9
3N75PC1503: RNCC: 5 | RNVC: 9
3N82PC1503: RNCC: 5 | RNVC: 9
SG1771PC12: RNCC: 5 | RNVC: 9
SG1773PC12: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-097-5927
Shouldered Shaft

000975927
291B: RNCC: 3 | RNVC: 2
291B: RNCC: 3 | RNVC: 9
111214PC286: RNCC: 5 | RNVC: 2
107028PC286: RNCC: 5 | RNVC: 9
107414PC286: RNCC: 5 | RNVC: 9
91027PC286: RNCC: 5 | RNVC: 9
91127PC286: RNCC: 5 | RNVC: 9
110927PC286: RNCC: 5 | RNVC: 9
111228PC286: RNCC: 5 | RNVC: 9
113414PC286: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-752-1685
Helical Gearshaft

007521685
3891B730: RNCC: 3 | RNVC: 2
7521685: RNCC: 3 | RNVC: 2
801E562: RNCC: 5 | RNVC: 9
913747: RNCC: 5 | RNVC: 9
2658D5: RNCC: 5 | RNVC: 9
25207521685: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-703-0911
Multiple Gears Gearshaft

017030911
29535216: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-01-700-0837
Flexible Drive Shaft

017000837
7183-225H: RNCC: 3 | RNVC: 2

16 Mar 2022

3040-01-700-8642
Linear Actuating Cylinder Piston

017008642
HC5330-3: RNCC: 3 | RNVC: 2

18 Apr 2022

3040-01-701-1311
Shouldered Shaft

017011311
90.1353.00: RNCC: 3 | RNVC: 2

28 Apr 2022

3040-12-419-8004

3040-00-375-8523
Rigid Connecting Link

003758523
524605: RNCC: 3 | RNVC: 2
62472: RNCC: 5 | RNVC: 2
62646-2PC31: RNCC: 5 | RNVC: 2
62669-2PC31: RNCC: 5 | RNVC: 2
62472: RNCC: 5 | RNVC: 2
A62472PCALL: RNCC: 5 | RNVC: 2
62654-2PC31: RNCC: 5 | RNVC: 2
62669-6ITEM2: RNCC: 5 | RNVC: 2
62644-2PC53: RNCC: 5 | RNVC: 2
62644-2PC53: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-740-9644
Shouldered Shaft

007409644
5215794: RNCC: 3 | RNVC: 9
5215794: RNCC: 5 | RNVC: 2
7409644: RNCC: 5 | RNVC: 2
HCF1278: RNCC: 5 | RNVC: 9
HCF1278B: RNCC: 5 | RNVC: 9
HCF1278A: RNCC: 5 | RNVC: 9
HCF1278C: RNCC: 5 | RNVC: 9
HCF1278D: RNCC: 5 | RNVC: 9
HCF1278E: RNCC: 5 | RNVC: 9
HCF1278G: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-371-5003
Straight Shaft

003715003
005974: RNCC: 3 | RNVC: 2
007851138: RNCC: 5 | RNVC: 2
851138: RNCC: 5 | RNVC: 2
25606: RNCC: 5 | RNVC: 9
F218L-204: RNCC: 5 | RNVC: 9
5974: RNCC: 5 | RNVC: 9
5620E9116: RNCC: 5 | RNVC: 9
851138: RNCC: 5 | RNVC: 9
007851138: RNCC: 5 | RNVC: 9
09-5974: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-734-0153
Pump Plunger Shoe

007340153
11136: RNCC: 3 | RNVC: 2
73516: RNCC: 5 | RNVC: 2
205-2: RNCC: 5 | RNVC: 2
6945: RNCC: 5 | RNVC: 2
40934: RNCC: 5 | RNVC: 2
368804R1: RNCC: 5 | RNVC: 9
368804R1: RNCC: 5 | RNVC: 9
11136: RNCC: 5 | RNVC: 9
73025173: RNCC: 5 | RNVC: 9
25173: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-4439
Alignment Disk

016994439
AF-216445: RNCC: 3 | RNVC: 2

31 Jan 2022

3040-00-368-9971
Shouldered Shaft

003689971
8409PC24: RNCC: 3 | RNVC: 2
389887PCRS: RNCC: 5 | RNVC: 2
1760-381PC24: RNCC: 5 | RNVC: 2
7503PC120: RNCC: 5 | RNVC: 2
1762-381PC24: RNCC: 5 | RNVC: 2
25951PCRS: RNCC: 5 | RNVC: 2
8402PC24: RNCC: 5 | RNVC: 2
8404PC24: RNCC: 5 | RNVC: 2
375911ALT2PCRS: RNCC: 5 | RNVC: 2
1767-381PC24: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-148-5373
Ball Joint

001485373
1388630: RNCC: 3 | RNVC: 9
WW8453905PC14: RNCC: 5 | RNVC: 2
WW8453309PC18: RNCC: 5 | RNVC: 2
WW8454631PC10: RNCC: 5 | RNVC: 2
WW5547588PC26: RNCC: 5 | RNVC: 2
W6680743PC27: RNCC: 5 | RNVC: 2
WW5547587PC12: RNCC: 5 | RNVC: 2
WW5547597PC65: RNCC: 5 | RNVC: 2
WW8453310PC6T09: RNCC: 5 | RNVC: 2
3713131-75: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-123-0666
Rigid Connecting Link

001230666
NAS356: RNCC: 3 | RNVC: 1
NAS356-63-590: RNCC: 3 | RNVC: 2

1 Nov 1968

3040-00-389-8586
Turbine Shaft

003898586
4987: RNCC: 3 | RNVC: 2
D15-631GPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-631PPC523-524-525-534: RNCC: 5 | RNVC: 2
D15-631BPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-631QPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-631RPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-640QPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-640BPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-640GPC523-524-526-534: RNCC: 5 | RNVC: 2
D15-640PPC523-524-526-534: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-343-7361
Thrust Bearing Shoe

003437361
DD381S41-292ALT2PC2T04: RNCC: 3 | RNVC: 2
262234PC5T07: RNCC: 5 | RNVC: 2
461884APC2T04: RNCC: 5 | RNVC: 2
461884BPC2T04: RNCC: 5 | RNVC: 2
461884PC2T04: RNCC: 5 | RNVC: 2
461885APC5T07: RNCC: 5 | RNVC: 2
461885BPC5T07: RNCC: 5 | RNVC: 2
461885CPC5T07: RNCC: 5 | RNVC: 2
461885PC5T07: RNCC: 5 | RNVC: 2
461886CPC2T04: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-517-0117
Flexible Control Casing

005170117
AN8016-3-61: RNCC: 2 | RNVC: 2
MIL-C-5638: RNCC: 4 | RNVC: 1

1 Jan 1963

3040-00-339-4544
Governor Shaft

003394544
1429174: RNCC: 3 | RNVC: 9
40J31PC8: RNCC: 5 | RNVC: 2
40J94PC163: RNCC: 5 | RNVC: 2
206DD0856LPC42: RNCC: 5 | RNVC: 2
LSD1S6100-650992PC8: RNCC: 5 | RNVC: 2
1429174: RNCC: 5 | RNVC: 2
12E947PC42: RNCC: 5 | RNVC: 2
1429174: RNCC: 5 | RNVC: 2
15E214PC42: RNCC: 5 | RNVC: 2
8G475PC1: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-499-3808
Friction Lining

004993808
48-338-13: RNCC: 3 | RNVC: 2
503-4-2M1ALT1PC4: RNCC: 5 | RNVC: 2
503-4-3M1ALT1ITEM4: RNCC: 5 | RNVC: 2
503-4-3M1ALT1PC4: RNCC: 5 | RNVC: 2
503-4-5X1ALT2ITEM4: RNCC: 5 | RNVC: 2
5173ALT1PC5: RNCC: 5 | RNVC: 2
5306-14: RNCC: 5 | RNVC: 2
83221W1ITEM4: RNCC: 5 | RNVC: 2
287044PC5: RNCC: 5 | RNVC: 2
96804S6307-1897ALT1ITEM4: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-317-2522
Friction Lining

003172522
A989PC52: RNCC: 3 | RNVC: 2
15733: RNCC: 3 | RNVC: 2
A1115PC61: RNCC: 3 | RNVC: 2
A1161PC52: RNCC: 3 | RNVC: 2
A1210PC52: RNCC: 3 | RNVC: 2
A1065PC52: RNCC: 3 | RNVC: 2
A914PC52: RNCC: 3 | RNVC: 2
A975PC61: RNCC: 3 | RNVC: 2
A2038PC52: RNCC: 3 | RNVC: 2
A995PC61: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-353-0642
Manual Control Lever

003530642
FWX308: RNCC: 3 | RNVC: 2
F539-7: RNCC: 3 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
5328463: RNCC: 5 | RNVC: 2
A328463: RNCC: 5 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
FWX308: RNCC: 5 | RNVC: 2
5328463: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-336-9613
Intermediate Shaft

003369613
NAVY1245APC30: RNCC: 3 | RNVC: 2
NAVY1245B1PC30: RNCC: 3 | RNVC: 2
NAVY1245BPC30: RNCC: 3 | RNVC: 2
NAVY1245PC30: RNCC: 3 | RNVC: 2
NAVY1250BPC11: RNCC: 3 | RNVC: 2
NAVY1250CPC11: RNCC: 3 | RNVC: 2
NAVY1250PC11: RNCC: 3 | RNVC: 2
NAVY1289PC30: RNCC: 3 | RNVC: 2
NAVY2332PC73: RNCC: 3 | RNVC: 2
NAVY2347PC16: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-318-6223
Shaft Collar

003186223
CL55S47-6ALT1PC27: RNCC: 3 | RNVC: 2
CL55S47-9ALT2PC27: RNCC: 3 | RNVC: 2
BB61S47-085PC27: RNCC: 3 | RNVC: 2
G96PC27: RNCC: 3 | RNVC: 2
BB61S47-087PC27: RNCC: 3 | RNVC: 2
G86PC27: RNCC: 3 | RNVC: 2
G86PC27: RNCC: 5 | RNVC: 2
C86PC27: RNCC: 5 | RNVC: 9
31: RNCC: 5 | RNVC: 9
1-7528: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-218-6183
Controla Shaft Assy

002186183
521131: RNCC: 3 | RNVC: 2
SN575013PC70T075-107: RNCC: 5 | RNVC: 9
SN575029PC29T030-42: RNCC: 5 | RNVC: 9
X1075A1PC72-73-83: RNCC: 5 | RNVC: 9
X1018A1PC70T075-107: RNCC: 5 | RNVC: 9
X1036A1PC51T056-162T0164: RNCC: 5 | RNVC: 9
Y1025A2PC25T030-42: RNCC: 5 | RNVC: 9
X1076A1PC72T074-83: RNCC: 5 | RNVC: 9
Y1025A1PC25T030-42: RNCC: 5 | RNVC: 9
Y1025A3PC25T030-42: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-420-2006
Positioning Shoe

004202006
SG1251PC16: RNCC: 3 | RNVC: 2
SG1264PC16: RNCC: 3 | RNVC: 2
SG1039PC16: RNCC: 3 | RNVC: 2
SG1266PC16: RNCC: 3 | RNVC: 2
SG1282PC16: RNCC: 3 | RNVC: 2
SG1545PC16: RNCC: 3 | RNVC: 2
SG1041PC16: RNCC: 3 | RNVC: 2
SG1165PC16: RNCC: 3 | RNVC: 2
SG1248PC16: RNCC: 3 | RNVC: 2
SG1366PC16: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-179-9605
Shouldered Shaft

001799605
ADG8646A: RNCC: 3 | RNVC: 2
ADG8646A: RNCC: 3 | RNVC: 9
MADG8660APC10: RNCC: 5 | RNVC: 9
10ADE8660BPC10: RNCC: 5 | RNVC: 9
13ADD8660BPC10: RNCC: 5 | RNVC: 9
10ADE8660APC10: RNCC: 5 | RNVC: 9
13ADD8660APC10: RNCC: 5 | RNVC: 9
15ADD8660APC10: RNCC: 5 | RNVC: 9
7ADD8660APC10: RNCC: 5 | RNVC: 9
ADE8646A: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-218-3710
Shouldered Shaft

002183710
4258P: RNCC: 3 | RNVC: 2
4258P: RNCC: 3 | RNVC: 9
171624D: RNCC: 5 | RNVC: 2
SL4276PC33: RNCC: 5 | RNVC: 2
SL4279PC33: RNCC: 5 | RNVC: 2
SL4637PC33: RNCC: 5 | RNVC: 2
AD14-S47-57PC33: RNCC: 5 | RNVC: 2
SL4276PC33: RNCC: 5 | RNVC: 9
SL4637PC33: RNCC: 5 | RNVC: 9
SL4279PC33: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-181-2931
Bell Crank

001812931
206-061-742-3: RNCC: 3 | RNVC: 2
206-061-742-003: RNCC: 5 | RNVC: 2

25 May 1970

3040-01-698-4166
Brake Shoe Set

016984166
4725398: RNCC: 3 | RNVC: 2

16 Nov 2021

3040-00-126-3362
Shouldered Shaft

001263362
X-242351: RNCC: 3 | RNVC: 2
X-242351: RNCC: 3 | RNVC: 9
X300B144X37: RNCC: 5 | RNVC: 2
300B144X37-430N: RNCC: 5 | RNVC: 9
Y300B144X31: RNCC: 5 | RNVC: 9
300B144X31-113N: RNCC: 5 | RNVC: 9
217470PC68: RNCC: 5 | RNVC: 9
215557PC68: RNCC: 5 | RNVC: 9
215176PC68: RNCC: 5 | RNVC: 9
215183PC68: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-700-8092
Flexible Shaft Assembly Casing

017008092
209-001-196-101: RNCC: 3 | RNVC: 2

14 Apr 2022

3040-01-699-3318
Straight Shaft

016993318
373583-1: RNCC: 3 | RNVC: 2

24 Jan 2022

3040-01-699-0306
Shouldered Shaft

016990306
00-693448: RNCC: 3 | RNVC: 2

4 Jan 2022

3040-01-675-3246
Rigid Connecting Link

016753246
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-1101: RNCC: 3 | RNVC: 2

5 Sep 2018

3040-00-150-7320
Mechanical Drive Housing

001507320
8754337: RNCC: 3 | RNVC: 2
2920001507320: RNCC: 5 | RNVC: 9
29201507320: RNCC: 5 | RNVC: 9

30 Jul 1970

3040-12-132-7551
Linear Actuating Cylinder Assembly

121327551
4214100000: RNCC: 3 | RNVC: 2
0154-15-20-07: RNCC: 5 | RNVC: 2
0154-15-20.07: RNCC: 5 | RNVC: 2
615B4-02: RNCC: 5 | RNVC: 2
062250969: RNCC: 5 | RNVC: 2
250969: RNCC: 5 | RNVC: 2
0154-15-20-07: RNCC: 5 | RNVC: 2
0336 9394: RNCC: 5 | RNVC: 2
3369394EE0154-15: RNCC: 5 | RNVC: 2
3369394: RNCC: 5 | RNVC: 9

30 May 1969

3040-00-146-4491
Shoe

001464491
107772PC170: RNCC: 3 | RNVC: 2
114972PC170: RNCC: 3 | RNVC: 2
114960PC170: RNCC: 3 | RNVC: 2
107672PC170: RNCC: 3 | RNVC: 2
107760PC170: RNCC: 3 | RNVC: 2
107660PC170: RNCC: 3 | RNVC: 2
11B: RNCC: 3 | RNVC: 2
107772PC170: RNCC: 5 | RNVC: 9
114960PC170: RNCC: 5 | RNVC: 9
11B: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-146-1111
Pump Shaft

001461111
1111800: RNCC: 3 | RNVC: 2
39J763PC103: RNCC: 5 | RNVC: 2
40J442PC480T0483: RNCC: 5 | RNVC: 2
25J123PC557T0560: RNCC: 5 | RNVC: 2
25J98PC432T0435: RNCC: 5 | RNVC: 2
40J414PC104T0107: RNCC: 5 | RNVC: 2
39J762PC607-610-611-616: RNCC: 5 | RNVC: 2
25J114PC132: RNCC: 5 | RNVC: 9
40J414PC104T0107: RNCC: 5 | RNVC: 9
40J442PC480T0483: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-147-0468
Shouldered Shaft

001470468
ADD8499A: RNCC: 3 | RNVC: 2
ADD8499A: RNCC: 3 | RNVC: 9
13ADD8491BPC5: RNCC: 5 | RNVC: 9
7ADD8491APC5: RNCC: 5 | RNVC: 9
MAADG8491APC5: RNCC: 5 | RNVC: 9
MADG8491APC5: RNCC: 5 | RNVC: 9
MADG8491CPC5: RNCC: 5 | RNVC: 9
13ADD8491APC5: RNCC: 5 | RNVC: 9
15ADD8491BPC5: RNCC: 5 | RNVC: 9
15ADD8491CPC5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-700-4778
Counterbalance Weight

017004778
5127T65P02: RNCC: 3 | RNVC: 2

29 Mar 2022

3040-01-699-3040
Bell Crank Support

016993040
990209-1: RNCC: 3 | RNVC: 2

22 Jan 2022

3040-01-698-4956
Spur Gearshaft

016984956
5165T73P01: RNCC: 3 | RNVC: 2
5165T73P01: RNCC: 5 | RNVC: 2

19 Nov 2021

3040-01-699-2763
Straight Shaft

016992763
50426-1: RNCC: 3 | RNVC: 2

21 Jan 2022

3040-00-213-0334
Shouldered Shaft

002130334
A909PC29: RNCC: 3 | RNVC: 2
A882PC27: RNCC: 3 | RNVC: 2
A924PC57: RNCC: 3 | RNVC: 2
A982PC27: RNCC: 3 | RNVC: 2
A1063PC57: RNCC: 3 | RNVC: 2
A890PC29: RNCC: 3 | RNVC: 2
A891PC29: RNCC: 3 | RNVC: 2
A917PC57: RNCC: 3 | RNVC: 2
A908PC29: RNCC: 3 | RNVC: 2
A925PC57: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-01-703-0196
Planetary Gears Carrier

017030196
29535986: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-01-702-6536
Rigid Connecting Link

017026536
212A1125-35: RNCC: 3 | RNVC: 2

19 Jul 2022

3040-00-216-9281
Thrust Bearing Shoe

002169281
47-16-2175-2: RNCC: 3 | RNVC: 2
1111506: RNCC: 3 | RNVC: 2
462175BPC2T04: RNCC: 5 | RNVC: 2
462175CPC2T04: RNCC: 5 | RNVC: 2
462175EPC2T04: RNCC: 5 | RNVC: 2
462175FPC2T04: RNCC: 5 | RNVC: 2
462585CPC2T04: RNCC: 5 | RNVC: 2
462585DPC2T04: RNCC: 5 | RNVC: 2
462585EPC2T04: RNCC: 5 | RNVC: 2
462585FPC2T04: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-703-4300
Hydraulic Accumulator

017034300
AKB25B-12P-NT: RNCC: 3 | RNVC: 2

7 Sep 2022

3040-00-126-8862
Shouldered Shaft

001268862
55-22404-15: RNCC: 3 | RNVC: 2
9354: RNCC: 3 | RNVC: 2
CA6781-14-1: RNCC: 5 | RNVC: 2
CA6660PC14-9354: RNCC: 5 | RNVC: 9
CA6782-14-1: RNCC: 5 | RNVC: 9
CA6782PC14-1: RNCC: 5 | RNVC: 9
CA6854PC14-1: RNCC: 5 | RNVC: 9
CA6856PC14-1: RNCC: 5 | RNVC: 9
9354-46M7: RNCC: 5 | RNVC: 9
9354P14-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-125-7848
Drive Shaft

001257848
FS26N: RNCC: 3 | RNVC: 2
FS0-26-2PC56: RNCC: 5 | RNVC: 9
FS0-262BPC56: RNCC: 5 | RNVC: 9
FSE26APC32: RNCC: 5 | RNVC: 9
FSE26PC32: RNCC: 5 | RNVC: 9
FSL26-3APC39: RNCC: 5 | RNVC: 9
FSL26-3PC39: RNCC: 5 | RNVC: 9
FSC26BPC28: RNCC: 5 | RNVC: 9
FSC26PC28: RNCC: 5 | RNVC: 9
FSN26PC5: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-1646
Shouldered Shaft

016991646
00-972588: RNCC: 3 | RNVC: 2

13 Jan 2022

3040-00-177-3168
Straight Shaft

001773168
4953-4500-10: RNCC: 3 | RNVC: 2
4500-10F581PC16: RNCC: 5 | RNVC: 2
4500-10F692PC17: RNCC: 5 | RNVC: 2
4500-10F693PC17: RNCC: 5 | RNVC: 2
4080-4500-10V2036: RNCC: 5 | RNVC: 9
4080-4500-10V2036: RNCC: 5 | RNVC: 9
4500-10F581PC16: RNCC: 5 | RNVC: 9
4500-10F692PC17: RNCC: 5 | RNVC: 9
4953-4500-10: RNCC: 5 | RNVC: 9
4500-10F693PC17: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-175-8894
Ball Joint

001758894
3713131-55: RNCC: 3 | RNVC: 9
WW6666560SH5PC58-60: RNCC: 5 | RNVC: 2
WW6666560SH1PC58-60: RNCC: 5 | RNVC: 2
WW8454512PC2: RNCC: 5 | RNVC: 2
WW8454513PC2: RNCC: 5 | RNVC: 2
WW6683539PC45: RNCC: 5 | RNVC: 2
WW8454437PC45: RNCC: 5 | RNVC: 2
WW8497158PC45: RNCC: 5 | RNVC: 2
3713131-55: RNCC: 5 | RNVC: 2
WW6666560SH1PC58-60: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-152-2431
Mechanically Actuated Spindle

001522431
3N9PC20: RNCC: 3 | RNVC: 9
3N103PC20: RNCC: 5 | RNVC: 9
3N101PC20: RNCC: 5 | RNVC: 9
NN16-8PC20: RNCC: 5 | RNVC: 9
3N37PC20: RNCC: 5 | RNVC: 9
NN11-17PC20: RNCC: 5 | RNVC: 9
AC2308-1: RNCC: 5 | RNVC: 9
NN16-3PC20: RNCC: 5 | RNVC: 9
1749: RNCC: 5 | RNVC: 9
20-11: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-698-5983
Shouldered Shaft

016985983
8656C0200K091A: RNCC: 3 | RNVC: 1

29 Nov 2021

3040-14-216-7458
Ball Joint

142167458
ROTULE V T6X100F6X100L: RNCC: 3 | RNVC: 2
VT06F06: RNCC: 3 | RNVC: 2
T6F6LMLEV: RNCC: 5 | RNVC: 2
T6F6LV: RNCC: 5 | RNVC: 2
7046227804: RNCC: 5 | RNVC: 2
0948250022: RNCC: 5 | RNVC: 2
0948250023: RNCC: 5 | RNVC: 2
0948250027: RNCC: 5 | RNVC: 2
0052956: RNCC: 5 | RNVC: 2
0948250022: RNCC: 5 | RNVC: 9

1 Jan 1965

3040-12-304-5240
Ball Joint

123045240
0117 5511: RNCC: 3 | RNVC: 2
4062590: RNCC: 5 | RNVC: 2
H3603-CSL10/2: RNCC: 5 | RNVC: 2
K0001175511: RNCC: 5 | RNVC: 2
4786602: RNCC: 5 | RNVC: 2
89233075: RNCC: 5 | RNVC: 2
0117 2734: RNCC: 5 | RNVC: 9
0117 3699: RNCC: 5 | RNVC: 9
01175511ES8936-03: RNCC: 5 | RNVC: 9
H3603CSD10: RNCC: 5 | RNVC: 9

26 Jul 1985

3040-01-673-9906
Control Cam

016739906
AB3Z5K751A: RNCC: 3 | RNVC: 2
7423203657: RNCC: 5 | RNVC: 2
AB315K751AA: RNCC: 5 | RNVC: 9

9 Jul 2018

3040-99-051-6034
Shouldered Shaft

990516034
3597/C6B: RNCC: 3 | RNVC: 2
20577 ITEM 6: RNCC: 5 | RNVC: 2
20577 PART 6: RNCC: 5 | RNVC: 2
20577/6: RNCC: 5 | RNVC: 2
3597 PART 6: RNCC: 5 | RNVC: 2
3597/6: RNCC: 5 | RNVC: 2
J/MD5/210/3597 PART 6: RNCC: 5 | RNVC: 2
J/MD5/210/3597/6: RNCC: 5 | RNVC: 2
3597 PART 6: RNCC: 5 | RNVC: 2
3597/6: RNCC: 5 | RNVC: 2

7 Nov 1992

3040-99-052-4558
Straight Shaft

990524558
SST/Y/573/20/A002/107 SHEET 001-: RNCC: 3 | RNVC: 1
001292371: RNCC: 5 | RNVC: 1
001292371 PART 107: RNCC: 5 | RNVC: 1
001292371 SHEET 002: RNCC: 5 | RNVC: 1
001292371/002: RNCC: 5 | RNVC: 1
001292371/107: RNCC: 5 | RNVC: 1
SST/Y/573/20/A002/000: RNCC: 5 | RNVC: 1
SST/Y/573/20/A002/000 PART 107: RNCC: 5 | RNVC: 1
SST/Y/573/20/A002/000 SHEET 002: RNCC: 5 | RNVC: 1
SST/Y/573/20/A002/000/002: RNCC: 5 | RNVC: 1

8 Mar 1995

3040-99-730-1793
Rigid Connecting Link

997301793
001280309 SHEET 32: RNCC: 3 | RNVC: 2
001280309: RNCC: 5 | RNVC: 1
M/701/97/0001 PART 225: RNCC: 5 | RNVC: 1
M/701/97/0001 SHEET 32: RNCC: 5 | RNVC: 1
M/701/97/0001/225: RNCC: 5 | RNVC: 1
M/701/97/0001/32: RNCC: 5 | RNVC: 1
001280309 PART 225: RNCC: 5 | RNVC: 2
001280309/225: RNCC: 5 | RNVC: 2
001280309/32: RNCC: 5 | RNVC: 2
SSK/M/701/97/0001 PART 225: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-00-218-3374
Shouldered Shaft

002183374
2377P: RNCC: 3 | RNVC: 2
2377P: RNCC: 3 | RNVC: 9
254881-2: RNCC: 5 | RNVC: 9
SL4881PC32: RNCC: 5 | RNVC: 9
SL6411PC32: RNCC: 5 | RNVC: 9
SL6451PC32: RNCC: 5 | RNVC: 9
SL7650PC32: RNCC: 5 | RNVC: 9
SL8132PC4: RNCC: 5 | RNVC: 9
SL4879PC32: RNCC: 5 | RNVC: 9
SL6413PC32: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-699-0548
Shaft Shouldered

016990548
990199-1: RNCC: 3 | RNVC: 2

5 Jan 2022

3040-01-697-7776
Manual Control Lever

016977776
13-13-598-002: RNCC: 3 | RNVC: 2

8 Oct 2021

3040-00-204-3268
Friction Lining

002043268
214-7039: RNCC: 3 | RNVC: 2
454400ITEM5: RNCC: 5 | RNVC: 2
97804S6307-506591ALT1PC4: RNCC: 5 | RNVC: 2
4188ALT1ITEM5: RNCC: 5 | RNVC: 2
503-5-2M1ALT1ITEM4: RNCC: 5 | RNVC: 2
78818W1PC15: RNCC: 5 | RNVC: 2
94977W1PC4: RNCC: 5 | RNVC: 2
A50-73: RNCC: 5 | RNVC: 2
90929W1PC4: RNCC: 5 | RNVC: 2
PUB6393-21ITEM15: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-697-9180
Pneumatic Accumulator

016979180
4053709: RNCC: 3 | RNVC: 2
4222122: RNCC: 5 | RNVC: 2
4222122: RNCC: 5 | RNVC: 9
4222122: RNCC: 7 | RNVC: 2

19 Oct 2021

3040-01-699-1139
Housing Adapter

016991139
2004181-1: RNCC: 3 | RNVC: 2

8 Jan 2022

3040-01-699-0500
Cam Control

016990500
2005232-1: RNCC: 3 | RNVC: 2

5 Jan 2022

3040-01-698-2122
Straight Shaft Assembly

016982122
111153009: RNCC: 3 | RNVC: 2

3 Nov 2021

3040-01-698-4767
Shaft Collar

016984767
143031978E: RNCC: 3 | RNVC: 2

18 Nov 2021

3040-01-174-6004
Remote Control Lever

011746004
LA64012PIECE8.9: RNCC: 3 | RNVC: 2
LA64012PIECE8.9: RNCC: 3 | RNVC: 9
LA64012 SHEET 22: RNCC: 5 | RNVC: 2
LB-64089: RNCC: 5 | RNVC: 2
LA64012 SHEET 22: RNCC: 5 | RNVC: 9
LA64012PIECE8.9: RNCC: 5 | RNVC: 9
LA64012 SHEET 22: RNCC: 5 | RNVC: 9
LA64012PIECE8.9: RNCC: 5 | RNVC: 9
LB-64089: RNCC: 5 | RNVC: 9
SPI-LB64089: RNCC: 5 | RNVC: 9

21 Mar 1984

3040-01-552-3748
Rigid Connecting Link

015523748
1821430: RNCC: 3 | RNVC: 2
1821430: RNCC: 5 | RNVC: 2
10466172: RNCC: 6 | RNVC: 9

12 Jun 2007

3040-01-698-2207
Linear Actuating Cylinder

016982207
E-7417: RNCC: 3 | RNVC: 2

3 Nov 2021

3040-01-700-9557
Rigid Connecting Link

017009557
251A1673-3: RNCC: 3 | RNVC: 2

21 Apr 2022

3040-01-698-9769
Shouldered Shaft

016989769
00-848722: RNCC: 3 | RNVC: 2

28 Dec 2021

3040-01-699-1136
Pawl

016991136
990322-1: RNCC: 3 | RNVC: 2

8 Jan 2022

3040-12-191-5960
Push-Pull Control Assembly

121915960
TVH-NI: RNCC: 3 | RNVC: 2
2,72-31847 ITEM 6200: RNCC: 5 | RNVC: 2
5-197886: RNCC: 5 | RNVC: 2
2.72-37896/7201: RNCC: 5 | RNVC: 2
2.72-37896/7201: RNCC: 5 | RNVC: 2
330-697: RNCC: 5 | RNVC: 2
N7172: RNCC: 5 | RNVC: 2
2.72-31846 ITEM 6200: RNCC: 5 | RNVC: 2
BA35-3040-244: RNCC: 5 | RNVC: 9
TV7,92: RNCC: 5 | RNVC: 9

15 Feb 1982

3040-99-732-6776
Ball Joint

997326776
48000149: RNCC: 3 | RNVC: 2
GSJ 204: RNCC: 5 | RNVC: 2
RHF500110: RNCC: 5 | RNVC: 2
A-108-00: RNCC: 5 | RNVC: 2
ANR1799: RNCC: 5 | RNVC: 2
GSJ204: RNCC: 5 | RNVC: 2
TRE76R: RNCC: 5 | RNVC: 2
NRC7661: RNCC: 5 | RNVC: 9
NTC9932: RNCC: 6 | RNVC: 9
ANR1799: RNCC: 8 | RNVC: 2

25 Apr 1991

3040-00-528-8736
Flexible Shaft Assembly Core

005288736
1581430: RNCC: 3 | RNVC: 9
581430: RNCC: 5 | RNVC: 2
100730R91: RNCC: 5 | RNVC: 2
111576R91: RNCC: 5 | RNVC: 2
7355825: RNCC: 5 | RNVC: 2
7413487: RNCC: 5 | RNVC: 2
G418049-87-1-2: RNCC: 5 | RNVC: 9
100730R91: RNCC: 5 | RNVC: 9
111576R91: RNCC: 5 | RNVC: 9
KC8721: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-787-7250
Straight Shaft

007877250
SS117: RNCC: 3 | RNVC: 2
A3-12: RNCC: 3 | RNVC: 2
9188646: RNCC: 3 | RNVC: 2
13029362: RNCC: 3 | RNVC: 2
G4-10: RNCC: 5 | RNVC: 2
966290-403: RNCC: 5 | RNVC: 2
G4-10: RNCC: 5 | RNVC: 2
S3-12: RNCC: 5 | RNVC: 9
412581-3: RNCC: 7 | RNVC: 2
Z8-40: RNCC: C | RNVC: 1

1 Jan 1960

3040-25-163-1979

3040-00-513-5786
Linear Actuating Cylinder Assembly

005135786
M2022790: RNCC: 3 | RNVC: 2
8327979: RNCC: 3 | RNVC: 2
AID968: RNCC: 5 | RNVC: 2
2297549: RNCC: 5 | RNVC: 2
648E17: RNCC: 5 | RNVC: 9
KC9668: RNCC: 5 | RNVC: 9
A4020: RNCC: 5 | RNVC: 9
2297549: RNCC: 5 | RNVC: 9
3040005135786: RNCC: 5 | RNVC: 9
2297549: RNCC: C | RNVC: 1

1 Jan 1963

3040-66-164-8476

3040-00-036-3080
Thrust Bearing Shoe

000363080
27-1866-2: RNCC: 3 | RNVC: 2
461868FPC2T04: RNCC: 3 | RNVC: 2
27-1866-2: RNCC: 3 | RNVC: 2
461866FPC2T04: RNCC: 3 | RNVC: 2
461866KPC2T04: RNCC: 5 | RNVC: 9
461866EPC2T04: RNCC: 5 | RNVC: 9
461866GPC2T04: RNCC: 5 | RNVC: 9
461866HPC2T04: RNCC: 5 | RNVC: 9
461866FPC2T04: RNCC: 5 | RNVC: 9
461868FPC2T04: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-499-2476
Shaft Retaining Plate

004992476
S4105-441657PC8715: RNCC: 3 | RNVC: 2
8715: RNCC: 3 | RNVC: 2
87911S4105-441767PC59: RNCC: 3 | RNVC: 2
87911S4105-441782PC8715: RNCC: 3 | RNVC: 2
N1072PC8715: RNCC: 5 | RNVC: 2
N32400PC8715: RNCC: 5 | RNVC: 2
N32250PC59: RNCC: 5 | RNVC: 2
X8715: RNCC: 5 | RNVC: 9
18438PC8715: RNCC: 5 | RNVC: 9
14247PC8715: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-648-6929
Control Cable Assembly

016486929
CCX43326: RNCC: 3 | RNVC: 2
308726: RNCC: 5 | RNVC: 2
45101-26: RNCC: 5 | RNVC: 2
45101-0792: RNCC: 5 | RNVC: 2
308726: RNCC: 5 | RNVC: 9

2 Oct 2015

3040-12-419-8005

3040-01-472-4006
Rigid Connecting Link

014724006
NAS356: RNCC: 3 | RNVC: 1
NAS356-61-846: RNCC: 3 | RNVC: 2

1 Mar 2000

3040-01-703-0909
Planetary Gears Carrier

017030909
29545366: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-01-703-0921
Linear Actuating Cylinder Piston

017030921
29544956: RNCC: 3 | RNVC: 2

16 Aug 2022

3040-00-152-2430
Mechanically Actuated Spindle

001522430
AC2307-1: RNCC: 3 | RNVC: 9
3N21-2PC20: RNCC: 5 | RNVC: 9
3N23-5PC20: RNCC: 5 | RNVC: 9
3N6PC20: RNCC: 5 | RNVC: 9
3N6PC21: RNCC: 5 | RNVC: 9
3N73PC20: RNCC: 5 | RNVC: 9
3N74PC20: RNCC: 5 | RNVC: 9
3N91PC20: RNCC: 5 | RNVC: 9
3N51PC20: RNCC: 5 | RNVC: 9
3N67PC20: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-673-6834
Rigid Connecting Link

016736834
146T7245Y112: RNCC: 3 | RNVC: 1
146T7245-112: RNCC: C | RNVC: 1

21 Jun 2018

3040-99-730-1855
Control Cam

997301855
001280309 SHEET 070: RNCC: 3 | RNVC: 1
001280309: RNCC: 5 | RNVC: 1
001280309/070: RNCC: 5 | RNVC: 1
M/701/97/0001 PART 281: RNCC: 5 | RNVC: 1
M/701/97/0001 SHEET 070: RNCC: 5 | RNVC: 1
M/701/97/0001/070: RNCC: 5 | RNVC: 1
M/701/97/0001/281: RNCC: 5 | RNVC: 1
M/701/97/0001/70: RNCC: 5 | RNVC: 1
SSK/M/701/97/0001 SHEET 070: RNCC: 5 | RNVC: 1
SSK/M/701/97/0001/070: RNCC: 5 | RNVC: 1

25 Apr 1991

3040-00-119-3239
Air Compressor Shoe

001193239
1569B: RNCC: 3 | RNVC: 2
1569B: RNCC: 3 | RNVC: 9
107427PC182: RNCC: 5 | RNVC: 9
110928PC182: RNCC: 5 | RNVC: 9
111128PC182: RNCC: 5 | RNVC: 9
118227PC182: RNCC: 5 | RNVC: 9
116312PC182: RNCC: 5 | RNVC: 9
11692PC182: RNCC: 5 | RNVC: 9
116927PC182: RNCC: 5 | RNVC: 9
118228PC182: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-99-818-5220
Shaft Collar

998185220
13/Y/275/0020/E001/110: RNCC: 3 | RNVC: 2
Y/275/0020/E001/110: RNCC: 5 | RNVC: 1
Y2750020E001000 PART 110: RNCC: 5 | RNVC: 1
Y2750020E001000-110: RNCC: 5 | RNVC: 1
13Y2750020E001000 PART 110: RNCC: 5 | RNVC: 2
13Y2750020E001000-110: RNCC: 5 | RNVC: 2
001207341 PART 110: RNCC: 5 | RNVC: 2
001207341-110: RNCC: 5 | RNVC: 2
13Y2750020E001000: RNCC: 6 | RNVC: 9
001207341: RNCC: 6 | RNVC: 9

15 May 1997

3040-01-670-3843
Shouldered Axle

016703843
7550477-G5254201-060: RNCC: 3 | RNVC: 1
G5254201-060: RNCC: 5 | RNVC: 1
G547-0001-G5254201-060: RNCC: 5 | RNVC: 1
7384908 PN 60D4: RNCC: 5 | RNVC: 1
12159M501E: RNCC: 5 | RNVC: 1
G525-4201 PN 60: RNCC: 5 | RNVC: 1
12-36-3010: RNCC: 5 | RNVC: 1
7384908 PN 60D4: RNCC: 5 | RNVC: 2
G5254201-060D4: RNCC: 5 | RNVC: 2
12-36-3010D4: RNCC: 5 | RNVC: 2

21 Feb 2018

3040-01-670-0726
Control Cam

016700726
7550479-264375101-27: RNCC: 3 | RNVC: 1
845-7285216 ITEM 27: RNCC: 5 | RNVC: 1
2643-820-12 ITEM 24: RNCC: 5 | RNVC: 1
264375101-27: RNCC: 5 | RNVC: 1
2643-751-01 ITEM 27: RNCC: 5 | RNVC: 1
G547-0003-264375101-27: RNCC: 5 | RNVC: 1
2643-820-12 ITEM 24D4: RNCC: 5 | RNVC: 2
7550479-264375101-27D4: RNCC: 5 | RNVC: 2
G547-0003-264375101-27D4: RNCC: 5 | RNVC: 2
264375101-27D4: RNCC: 5 | RNVC: 2

5 Feb 2018

3040-99-016-0766
Shouldered Shaft

990160766
SSK/M/541/40/0002 SHEET 019 ISS-: RNCC: 3 | RNVC: 1
001280333: RNCC: 5 | RNVC: 1
001280333 PART 231: RNCC: 5 | RNVC: 1
001280333 SHEET 004: RNCC: 5 | RNVC: 1
001280333 SHEET 019: RNCC: 5 | RNVC: 1
001280333/004: RNCC: 5 | RNVC: 1
001280333/019: RNCC: 5 | RNVC: 1
001280333/231: RNCC: 5 | RNVC: 1
SSK/M/541/40/0002: RNCC: 5 | RNVC: 1
SSK/M/541/40/0002 PART 231: RNCC: 5 | RNVC: 1

11 Dec 1992

3040-00-640-4880
Shaft Collar

006404880
SC31: RNCC: 3 | RNVC: 2
67700: RNCC: 3 | RNVC: 2
504-003: RNCC: E | RNVC: 8

1 Jan 1963

3040-00-364-4261
Shaft Collar

003644261
N21141PC7: RNCC: 3 | RNVC: 2
N21141PC7: RNCC: 5 | RNVC: 9
N12808PC34: RNCC: 5 | RNVC: 9
N21141PC7: RNCC: 5 | RNVC: 9
N29941PC7: RNCC: 5 | RNVC: 9
N30741PC7: RNCC: 5 | RNVC: 9
N8808PC34: RNCC: 5 | RNVC: 9
N38841PC7: RNCC: 5 | RNVC: 9
N4835PC34: RNCC: 5 | RNVC: 9
N5808PC34: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-071-5505
Thrust Bearing Shoe

000715505
26J819PC1T03: RNCC: 3 | RNVC: 2
37-2590-1: RNCC: 3 | RNVC: 2
462590CPC1T03: RNCC: 3 | RNVC: 2
26J291PC160T0162: RNCC: 3 | RNVC: 2
26J820PC1T03: RNCC: 3 | RNVC: 2
462591CPC1T03: RNCC: 3 | RNVC: 2
37-4716-2: RNCC: 3 | RNVC: 2
462590CPC1T03: RNCC: 3 | RNVC: 2
26J820PC1T03: RNCC: 5 | RNVC: 2
464717PC2T04: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-615-6760
Shouldered Shaft

006156760
2843E57: RNCC: 3 | RNVC: 2
2843E57: RNCC: 5 | RNVC: 2
6156760: RNCC: 5 | RNVC: 2
2843E57: RNCC: 5 | RNVC: 2
187310R1: RNCC: 5 | RNVC: 2
364931: RNCC: 5 | RNVC: 2
2150054: RNCC: 5 | RNVC: 2
367SP36: RNCC: 5 | RNVC: 9
2843E57: RNCC: 5 | RNVC: 9
2150054: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-398-5780
Shouldered Shaft

003985780
728-7260-623: RNCC: 3 | RNVC: 9
220-5-6ASS: RNCC: 5 | RNVC: 9
50387-191: RNCC: 5 | RNVC: 9
50387PC191: RNCC: 5 | RNVC: 9
728-0234-104: RNCC: 5 | RNVC: 9
50376-1-191: RNCC: 5 | RNVC: 9
50376-1PC191: RNCC: 5 | RNVC: 9
50376PC191: RNCC: 5 | RNVC: 9
50387-191: RNCC: 5 | RNVC: 9
50387PC191: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-398-8930
Rigid Connecting Link

003988930
297882-01: RNCC: 3 | RNVC: 2
297882-01: RNCC: 3 | RNVC: 9
SL8675PC22: RNCC: 5 | RNVC: 2
5587P: RNCC: 5 | RNVC: 2
10700: RNCC: 5 | RNVC: 2
SL9032PC29: RNCC: 5 | RNVC: 2
SL8907PC29: RNCC: 5 | RNVC: 2
DR82989PC343-343A: RNCC: 5 | RNVC: 9
SL5720PC343: RNCC: 5 | RNVC: 9
SL5738PC343: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-698-2474
Differential Gear Unit

016982474
4242-0001-1: RNCC: 3 | RNVC: 2

4 Nov 2021

3040-01-697-7513
Spur Gearshaft

016977513
5036T84P04: RNCC: 3 | RNVC: 2

7 Oct 2021

3040-01-699-0137
Shouldered Shaft

016990137
00-293963: RNCC: 3 | RNVC: 2

31 Dec 2021

3040-01-699-1137
Housing Adapter

016991137
2004180-1: RNCC: 3 | RNVC: 2

8 Jan 2022

3040-01-699-2660
Bell Crank Support

016992660
980110-1: RNCC: 3 | RNVC: 2

20 Jan 2022

3040-01-700-8079
Flexible Shaft Assembly Core

017008079
209-001-195-101: RNCC: 3 | RNVC: 2

14 Apr 2022

3040-01-698-8772
Shouldered Shaft

016988772
00-248821: RNCC: 3 | RNVC: 2

16 Dec 2021

3040-01-698-4987
Bevel Gearshaft

016984987
6034T39G04: RNCC: 3 | RNVC: 2
6034T39G04: RNCC: 5 | RNVC: 2

19 Nov 2021

3040-01-699-0919
Shouldered Axle

016990919
00-855520: RNCC: 3 | RNVC: 2

6 Jan 2022

3040-01-577-4115
Mechanical Drive Housing

015774115
1341428: RNCC: 3 | RNVC: 2
1341428: RNCC: 5 | RNVC: 2
1341428: RNCC: 5 | RNVC: 2
10466175: RNCC: 6 | RNVC: 9

3 Sep 2009

3040-01-658-7378
Ball Joint

016587378
BC3Z-3050-A: RNCC: 3 | RNVC: 9
BC3Z3050D: RNCC: 5 | RNVC: 2

14 Oct 2016

3040-00-423-0801
Spur Gearshaft

004230801
TG07: RNCC: 3 | RNVC: 2
8B8119: RNCC: 3 | RNVC: 2
193-13: RNCC: 3 | RNVC: 2
7994328: RNCC: 3 | RNVC: 2
666947: RNCC: 3 | RNVC: 9
7EQ7113A: RNCC: 5 | RNVC: 9
3446: RNCC: 5 | RNVC: 9
DU3441: RNCC: 5 | RNVC: 9
7EQ7113: RNCC: 5 | RNVC: 9
2073114: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-666-8245
Worm Shaft

016668245
P00356-1: RNCC: 3 | RNVC: 2
P000356-1: RNCC: 5 | RNVC: 2

21 Sep 2017

3040-12-419-7898

3040-01-703-0166
Mechanical Drive Housing

017030166
29544592: RNCC: 3 | RNVC: 2

11 Aug 2022

3040-12-419-8006

3040-01-507-1608
Linear Actuating Cylinder Assembly

015071608
180-4239: RNCC: 3 | RNVC: 2
206-0514: RNCC: 5 | RNVC: 2

21 Apr 2003

3040-00-546-5146
Rigid Connecting Link

005465146
NAS356: RNCC: 3 | RNVC: 1
NAS356-64-1240: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-398-9892
Friction Lining

003989892
2262527: RNCC: 3 | RNVC: 2
WW2265910PC41: RNCC: 5 | RNVC: 2
WW2265918PC33: RNCC: 5 | RNVC: 2
WW2265942PC26: RNCC: 5 | RNVC: 2
2262527REFAM24: RNCC: 5 | RNVC: 2
226252REFAM24: RNCC: 5 | RNVC: 2
WW2265970PC33: RNCC: 5 | RNVC: 2
WW2265975PC33: RNCC: 5 | RNVC: 2
WW2265941PC26: RNCC: 5 | RNVC: 2
WW2265965PC33: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-698-5281
Spur Gearshaft

016985281
5034T78P04: RNCC: 3 | RNVC: 2
5034T78P04: RNCC: 5 | RNVC: 2

22 Nov 2021

3040-01-699-1673
Rigid Connecting Link

016991673
2005228-1: RNCC: 3 | RNVC: 2

13 Jan 2022

3040-01-697-6578

4 Oct 2021

Load More Results