What is Federal Supply Class 3040?

FSC 3040 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.

What is NATO Supply Classification Class 3040?

NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.

Which Federal Supply Group is FSC 3040 in?

FSC 3040 is in Federal Supply Group (FSG) 30 which contains Mechanical Power Transmission Equipment.

Which NATO Supply Classification Group is NSC 3040 in?

NSC 3040 is in NATO Supply Classification Group (NSG) 30 which contains Mechanical Power Transmission Equipment.

What is a Push-Pull Control Assembly?

A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.

What is a Transmission Fluid Cooler?

A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.

What is a Dual Disk Brake?

A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is a Single Disk Brake?

A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.

What is an Expander Tube Brake?

An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.

What is a Multiple Disk Brake?

A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.

What is a Segmented Rotor Brake?

A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.

What is a Shoe Type Brake?

A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.

What is a Flexible Shafting?

A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.

What is a Flexible Shaft Assembly Core?

A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.

What is a Flexible Shaft Assembly Casing?

A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.

What is a Differential Spider?

A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.

A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).

What is a Brake Drum?

A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).

What is a Friction Lining?

A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.

What is a Piston Ring?

A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.

What is a Shaft Collar?

A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.

What is a Brake Lining Kit?

A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.

What is a Piston Ring Set?

A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.

What is a Ball Joint?

A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.

What is a Double Ball Joint?

A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.

What is a Hydraulic Control Receiver-Transmitter?

A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.

What is a Worm Shaft?

A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.

A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.

What is a Control Pedal?

A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.

What is a Friction Lining Material?

A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.

What is an Extension Shaft?

An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.

What is a Flexible Core End Fitting?

A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.

What is a Flexible Casing End Fitting?

A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.

What is a Flexible Casing Coupling Nut?

A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.

What is a Flexible Shaft Assembly?

A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.

What is a Shaft Retaining Plate?

A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.

What is a Flexible Drive Shaft?

A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.

What is a Flexible Control Casing?

A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.

What is a Hydraulic Accumulator?

A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.

What is a Pneumatic Accumulator?

A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.

What is a Rigid Connecting Link?

A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).

What is a Linear Actuating Cylinder?

A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.

What is a Nonrotating Shaft Eye Bracket?

A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.

What is a Rotating Shaft Eye Bracket?

A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).

What is a Brake Backing Plate?

A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.

What is a Remote Control Lever?

A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.

A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).

What is a Straight Shaft?

A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.

What is a Detent Plate?

A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.

What is a Bell Crank?

A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).

What is a Grease Cap?

A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.

✨ Tired of ads? Register and login for a clean, ad-free experience!

Miscellaneous Power Transmission Equipment

Federal Supply Class (FSC): 3040

NATO Supply Classification Class (NSC): 3040

Group Description: Mechanical Power Transmission Equipment

Federal Supply Group (FSG): 30

NATO Supply Classification Group (NSG): 30

Page 1 of 575

NSN Format for Miscellaneous Power Transmission Equipment

30	40	XX	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

FSC 3040 Miscellaneous Power Transmission Equipment

Includes Shafts and Shafting; Collars; Gearshafts; Ball Joints; Actuating Cylinders.

Additional Information for Miscellaneous Power Transmission Equipment

NATO Supply Class 3040 is a classification within NATO Supply Group 30, which is dedicated to Mechanical Power Transmission Equipment. Specifically, Class 3040 focuses on Miscellaneous Power Transmission Equipment.

Miscellaneous Power Transmission Equipment refers to a wide range of components and devices used in mechanical power transmission systems. These components are responsible for transmitting power from a power source to various machinery and equipment.

Examples of items that fall under NATO Supply Class 3040 include:

1. Gears: These are toothed wheels that mesh with each other to transmit power and motion between rotating shafts.

2. Pulleys: Pulleys are used to change the direction or speed of a rotating shaft by means of a belt or chain.

3. Sprockets: Similar to pulleys, sprockets are toothed wheels that engage with a chain or a toothed belt to transmit power.

4. Clutches: Clutches are used to engage or disengage power transmission between two rotating shafts.

5. Couplings: Couplings are used to connect two shafts together, allowing for the transmission of power and motion.

6. Bearings: Bearings are used to support and reduce friction between moving parts in a power transmission system.

7. Shafts: Shafts are the rotating elements that transmit power from the power source to the driven machinery.

8. Housings and Casings: These are protective enclosures that house and protect the various components of a power transmission system.

NATO Supply Class 3040 encompasses a wide range of miscellaneous power transmission equipment, ensuring that all necessary components for efficient power transmission are included.

NSN by Country

US
United States
149442 Items

FR
France
43199 Items

UK
United Kingdom
31329 Items

DE
Germany
16659 Items

AU
Australia
2837 Items

Frequently Asked Questions(FAQ) for Federal Supply Class 3040

What is Federal Supply Class 3040?: FSC 3040 is the Federal Supply Class(formally known as NATO Supply Classification Class NSC 3040) in the USA for supply items codified in the category of Miscellaneous Power Transmission Equipment.
What is NATO Supply Classification Class 3040?: NSC 3040 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 3040 in the USA) for supply items codified in the category of Miscellaneous Power Transmission Equipment.
Which Federal Supply Group is FSC 3040 in?: FSC 3040 is in Federal Supply Group(FSG) 30 which contains .
Which NATO Supply Classification Group is NSC 3040 in?: NSC 3040 is in NATO Supply Classification Group(NSG) 30 which contains .

Supply Items Included in Federal Supply Class 3040

What is a Push-Pull Control Assembly? 2424 Items: A Push-Pull Control Assembly (CONTROL ASSEMBLY,PUSH-PULL) is a control consisting of a wire, wire rope, or a center load rail with ball bearings, within a flexible conduit. One end must have a threaded sleeve for mounting to a wall, bulkhead, or handle, or clevis. It is used to operate or control, either manually or mechanically a mechanical device. It may include such attaching devices as nut(s), washer(s), clevis, bracket(s), and/or the like. For items designed to transmit rotary motion, see SHAFT ASSEMBLY, FLEXIBLE.
What is a Transmission Fluid Cooler? 239 Items: A Transmission Fluid Cooler (COOLER,FLUID,TRANSMISSION) is an apparatus designed to lower the temperature of the fluid in power transmission equipment by bringing it into proximity with another fluid of lower temperature so that heat transfer is effected by conduction through the walls of separating chambers. Excludes air conditioning equipment, refrigeration equipment, and radiators.
What is a Dual Disk Brake? 46 Items: A Dual Disk Brake (BRAKE,DUAL DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. Two DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is a Single Disk Brake? 139 Items: A Single Disk Brake (BRAKE,SINGLE DISK) is a brake consisting essentially of the following: a. A single piece or divided cylinder housing designed to be mounted on the torque flange of an axle. The cylinder housing has a slot or groove through which the DISK, BRAKE passes. It contains a piston(s) or push rod(s) which provides the hydraulic or mechanical force to press the LINING, FRICTION against the DISK, BRAKE. b. LINING, FRICTION. c. A DISK, BRAKE designed to be keyed or rigidly attached to a wheel or rotating shaft.
What is an Expander Tube Brake? 14 Items: An Expander Tube Brake (BRAKE,EXPANDER TUBE) is a brake consisting essentially of the following: a. A frame designed to fit over and be attached to the torque flange of the axle, and having provisions for housing an expander tube and brake blocks. b. An expander tube which is a flat rubber tube designed to be filled with brake fluid and thereby force brake blocks against the brake drum. c. Brake blocks which may be cemented to the expander tube or fitted into the frame above the expander tube.
What is a Multiple Disk Brake? 226 Items: A Multiple Disk Brake (BRAKE,MULTIPLE DISK) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Metallic disks keyed to rotate with the wheel alternated with nonrotating disks keyed to the anchor bracket. See also BRAKE, SEGMENTED ROTOR.
What is a Segmented Rotor Brake? 39 Items: A Segmented Rotor Brake (BRAKE,SEGMENTED ROTOR) is a brake consisting essentially of the following: a. A brake anchor bracket, also called a carrier assembly, which is the basic unit of the brake. It is designed to be attached to the torque flange of the axle and is also the part upon which the other components of the brake are assembled. b. A floating hydraulically actuated annular piston, or an equivalent mechanical device, used for applying braking pressure. c. Segments of brake lining attached to the nonrotating disks.
What is a Shoe Type Brake? 163 Items: A Shoe Type Brake (BRAKE,SHOE TYPE) is a brake consisting essentially of the following: a. A torque spider which is a disklike metal part designed to fit over and be attached to the torque flange of the axle. b. One or more brake shoes with brake lining attached. c. A hydraulic cylinder(s) or mechanical linkage to provide the force by which the brake shoe is pressed against the brake drum.
What is a Flexible Shafting? 203 Items: A Flexible Shafting (SHAFTING,FLEXIBLE) is an item consisting of consecutive layers of wire, wound in opposite directions, one upon the other, to obtain extreme flexibility, either with or without an inclosing casing. It is designed to transmit power or to operate remote controls by rotary motion. This is bulk shafting only and does not include flexible shafts with attachments or special terminations.
What is a Flexible Shaft Assembly Core? 348 Items: A Flexible Shaft Assembly Core (CORE,FLEXIBLE SHAFT ASSEMBLY) is a specific length of SHAFTING, FLEXIBLE with squared end(s) and/or crimped on tip(s) with or without fittings attached, designed so as to function inside the pliable protective casing of a SHAFT ASSEMBLY, FLEXIBLE.
What is a Flexible Shaft Assembly Casing? 505 Items: A Flexible Shaft Assembly Casing (CASING,FLEXIBLE SHAFT ASSEMBLY) is a round, hollow, flexible item made of closely wound wire, plastic, or other flexible material with connections to permit stationary attachment of each end. It is used to protect and guide the core of a SHAFT ASSEMBLY, FLEXIBLE or CONTROL ASSEMBLY, PUSH-PULL.
What is a Differential Spider? 118 Items: A Differential Spider (SPIDER,DIFFERENTIAL) is a spider with four radiating arms, designed to form a connection between two shafts, which allows one shaft to rotate while the other is stopped or rotates at a different speed or direction.
What is a Breather? 469 Items: A Breather is a mechanical device designed to permit a free flow of air into and out of an enclosure, usually used on engine crankcase, vehicular differentials and transmissions, pumps, compressors, and the like. See also CAP, VENT, FUEL STORAGE TANK. excludes VENTALATOR (as modified).
What is a Brake Drum? 227 Items: A Brake Drum is a circular shaped metal item designed to be connected to a machine or vehicle shaft or wheel and used to retard, stop or prevent motion by the application of pressure exerted by brake(s) or band(s).
What is a Friction Lining? 849 Items: A Friction Lining (LINING,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds, cut or molded to a specific size. It may be a segment or a complete lining. It is usually designed to be fastened to a shoe, disk, band, cone, or the like, but may be installed without fastening. It provides a friction surface for transmitting, retarding, or stopping motion. Excludes LINING MATERIAL, FRICTION.
What is a Piston Ring? 1096 Items: A Piston Ring (RING,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition, designed to be fitted in a circumferential groove in a piston and to spring outward against the cylinder wall to function as a seal or wiper. It is supplied in various cross-sectional shapes and is cut through at one point to allow for installation in the piston ring groove. It may include an expander. Excludes PACKING, PREFORMED; RETAINER, OIL SEAL; RETAINER, PACKING; RING, RETAINING; RING WIPER; and SEAL RING, METAL.
What is a Shaft Collar? 5323 Items: A Shaft Collar (COLLAR,SHAFT) is an item designed to be mounted around a shaft to limit axial movement of the shaft and/or its assembled parts. It is secured directly to the shaft by use of a setscrew(s), pin(s), or the like, which may be a part of the item of supply. A pilot hole drilled in or through the wall(s) for drilling and pinning at application may be considered a method of securing. Solid items have a bearing surface on one or both end(s) perpendicular to the axis. For items designed to be mounted around the extended hub portion of a mounted item on a shaft or clamp around a shaft, see CLAMP, HUB. See also BEARING, SLEEVE; BUSHING, SLEEVE; SPACER, SLEEVE; and COUPLING, SHAFT, RIGID.
What is a Brake Lining Kit? 44 Items: A Brake Lining Kit is a collection of items consisting of brake linings of specific size(s) together with rivets and/or bolts for fastening the lining to the original brake shoes. Excludes brake shoe kits containing the assembled brake shoes complete with linings, and also brake lining packaged in sheets or rolls.
What is a Piston Ring Set? 91 Items: A Piston Ring Set (RING SET,PISTON) is two or more complete RING, PISTON grouped for a single piston or for all pistons of an internal combustion engine, air compressor, or the like.
What is a Ball Joint? 2498 Items: A Ball Joint is an item in which the end of one member is partly spherical and fits into a corresponding spherical cavity in the other member, thus permitting a relative angular movement. Excludes items specifically designed for vehicular steering and torsion application.
What is a Double Ball Joint? 56 Items: A Double Ball Joint (BALL JOINT,DOUBLE) is an assembly consisting of two (2) BALL JOINT. Excludes items specifically designed for vehicular steering and torsion application.
What is a Hydraulic Control Receiver-Transmitter? 46 Items: A Hydraulic Control Receiver-Transmitter (RECEIVER-TRANSMITTER,HYDRAULIC CONTROL) is an item consisting of one or more hydraulic receivers and transmitters designed to transmit hydraulic pressure from the transmitter to the receiver, for control of mechanical action.
What is a Worm Shaft? 1573 Items: A Worm Shaft is a drive shaft having helical thread(s) on a portion of its outer surface, machined bearing surface(s) and facilities for driving (other than a hub) on one or both ends of shaft. Designed to mate with a cam, gear sector, worm wheel, etc. Includes items with bearings. Excludes items having more than one worm complement of helical threads, items with a separate complement of gear teeth, and GEAR, WORM.
What is a Pedal Pad? 28 Items: A Pedal Pad (PAD,PEDAL) is an item mounted on a PEDAL, CONTROL or other linkage and designed to prevent slipping during actuation by the foot. The item usually consists of a rubber-like material, conforms in shape and size to the item to be covered, and can be replaced if worn.
What is a Control Pedal? 222 Items: A Control Pedal (PEDAL,CONTROL) is an item designed for attachment to a control lever, rod, shaft or the like to facilitate foot movement of the control device. Excludes pedals with integral or attached shafts or arms; PAD, PEDAL; PEDAL, BICYCLE; PEDAL, BASS DRUM; and PEDAL, SOCK, HIGH HAT CYMBAL.
What is a Friction Lining Material? 72 Items: A Friction Lining Material (LINING MATERIAL,FRICTION) is a fibrous and/or metallic material with or without binders and/or compounds woven or molded into roll or sheet form of uniform width and thickness and may be fabricated with or without cork inserts. It is intended as the bulk material from which LINING, FRICTION may be fabricated for use on disks, shoes, or bands to provide a friction surface for transmitting, retarding, or stopping motion.
What is an Extension Shaft? 721 Items: An Extension Shaft is an item consisting of a length of rigid shafting designed to be coupled to the shaft of items such as variable capacitors, switches, hand cranks and the like. It is specifically designed to increase the length of the original shaft and may also effect a change in the shaft diameter. Includes coupling(s) or has processed end(s) to facilitate the attachment of a coupling device. May have provision for electrically insulating the extension shaft from the other shaft.
What is a Flexible Core End Fitting? 92 Items: A Flexible Core End Fitting (END FITTING,FLEXIBLE CORE) is an item designed to be permanently secured to the end of a CORE, FLEXIBLE SHAFT ASSEMBLY to provide a means for attaching or engaging with a driving or driven member.
What is a Flexible Casing End Fitting? 259 Items: A Flexible Casing End Fitting (END FITTING,FLEXIBLE CASING) is a fitting designed to be secured to the ends of a CASING, FLEXIBLE SHAFT ASSEMBLY to provide a means by which the casing can be attached to the housing of the driving or driven members, either directly or by a coupling nut, or the like. See also FERRULE, ELECTRICAL CONDUIT.
What is a Flexible Casing Coupling Nut? 85 Items: A Flexible Casing Coupling Nut (NUT,COUPLING,FLEXIBLE CASING) is an item of metallic composition with internal threads and an internal seat or shoulder designed for the purpose of joining a flexible casing, such as a CASING, FLEXIBLE SHAFT ASSEMBLY capped with a ferrule and fitting. See also NUT, COUPLING, ELECTRICAL CONDUIT.
What is a Flexible Shaft Assembly? 1302 Items: A Flexible Shaft Assembly (SHAFT ASSEMBLY,FLEXIBLE) is an item consisting of a casing with fittings and attachments on each end and a spirally wound wire core with formed end(s) and/or crimped on end fittings. It is designed to transmit rotary motion around bends from a motor or other power source to drive various types of equipment, such as tachometers, speedometers, remote controls, instruments, and the like, which are located at an angle and/or distance from the power source. See also CONTROL ASSEMBLY, PUSH-PULL.
What is a Shaft Retaining Plate? 2591 Items: A Shaft Retaining Plate (PLATE,RETAINING,SHAFT) is a round, square, or rectangular comparatively flat item having a centrally located hole, designed to accommodate and/or support a shaft. It must have drilled and/or tapped holes for mounting purposes. Excludes RETAINER, PACKING; END BELL, ELECTRICAL ROTATING EQUIPMENT.
What is a Flexible Drive Shaft? 1072 Items: A Flexible Drive Shaft (SHAFT,DRIVE,FLEXIBLE) is an item consisting of a flexible metal rod or SHAFTING, FLEXIBLE with specific terminations, specifically designed to transmit power, operate remote controls, and the like. For items designed to be inclosed in a casing, see CORE, FLEXIBLE SHAFT ASSEMBLY; see also COUPLING, SHAFT, FLEXIBLE.
What is a Flexible Control Casing? 363 Items: A Flexible Control Casing (CASING,FLEXIBLE CONTROL) is a round, hollow, flexible item made of closely wound wire which may have a covering. It is used to serve as a guide and support for push-pull or rotating types of controls for various devices. See also HOSE, METAL. For items with end connections, see CASING, FLEXIBLE SHAFT ASSEMBLY.
What is a Hydraulic Accumulator? 667 Items: A Hydraulic Accumulator (ACCUMULATOR,HYDRAULIC) is an accumulator in which liquids are stored under pressure for momentary energy in a hydraulic system. Excludes ACCUMULATOR, HYDRAULIC, SQUIB ACTUATED.
What is a Pneumatic Accumulator? 108 Items: A Pneumatic Accumulator (ACCUMULATOR,PNEUMATIC) is an accumulator in which gases are stored under pressure for momentary energy in a pneumatic system.
What is a Rigid Connecting Link? 27690 Items: A Rigid Connecting Link (CONNECTING LINK,RIGID) is an item of various cross-sectional shapes which may be of solid or hollow construction. It is specifically designed for attachment to a lever(s) and/or control(s) to actuate various remote mechanisms. It is one of the following: (1) A one-piece item with or without eyes and/or holes in each end which may have bushings or bearings pressed in the eyes; (2) A one-piece item with both ends processed for terminations, excluding threaded end(s); (3) A two-piece construction type item consisting of a body with both ends processed for terminations and a single end attachment; or (4) A three-piece construction type item consisting of a body and two end attachments. Excludes internal combustion engine type piston connecting rods; DRAG LINK, STEERING; LINK, ANCHOR, BRAKE SHOE; TIE ROD, STEERING; and TURNBUCKLE. For cylindrical shaped externally threaded items without end attachments, see ROD, THREADED END and STUD (as modified).
What is a Linear Actuating Cylinder? 3189 Items: A Linear Actuating Cylinder (CYLINDER,ACTUATING,LINEAR) is a cylinder designed to house a piston and other necessary component parts of a CYLINDER ASSEMBLY, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Nonrotating Shaft Eye Bracket? 2276 Items: A Nonrotating Shaft Eye Bracket (BRACKET,EYE,NONROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a nonrotating mechanical shaft. It has mounting holes for fastening to a supporting member or main body. It may have provision to accommodate a pin or threaded fastener to hold the shaft in a fixed position.
What is a Rotating Shaft Eye Bracket? 1909 Items: A Rotating Shaft Eye Bracket (BRACKET,EYE,ROTATING SHAFT) is a rigid metal item usually fabricated from steel castings and/or welded steel pieces and designed with one or more hole(s) in line to accompany and hold, align, or support a mechanical shaft that rotates through an arc not to exceed 360 degrees (6.282 radians). It may have provision to accommodate a bushing or sleeve but usually it has a straight drilled shaft-support hole. Mounting holes are provided for attaching to a supporting member or main body. Excludes HOUSING, BEARING UNIT (as modified).
What is a Brake Backing Plate? 196 Items: A Brake Backing Plate (PLATE,BACKING,BRAKE) is a rigid circular shaped metal item with a centrally located aperture. It has mounting holes and is specifically designed to mount and position the components of a BRAKE (as modified). It also serves to prevent dirt and other foreign matter from entering the braking mechanism. Excludes items which are used as a dust shield only.
What is a Remote Control Lever? 8947 Items: A Remote Control Lever (LEVER,REMOTE CONTROL) is a rigid item usually in the form of an arm of various shapes and cross sections, containing two or more holes so spaced that one serves as a pivot with or without hubs and must have a definite means for securing to a shaft (such as threaded hole for set-screw, keyway(s), splines, serrations or some clamping device). The other hole(s) connect(s) to CONNECTING LINK, RIGID; WIRE ROPE ASSEMBLY, SINGLE LEG; or CLEVIS, ROD END; to provide transmission of movement to other parts of the mechanism. See also BELL CRANK. For manually operated items see LEVER, MANUAL CONTROL.
What is a Pawl? 3100 Items: A Pawl is a catching device of various shapes and cross sections, which permits motion in only one direction. Designed to engage the teeth or notches of a sector, quadrant, ratchet wheel, or the like. Item is so pivoted that the angle of approach to the interdental engagement causes it to rest more firmly as the reverse load is increased. Item may be spring actuated to cause engagement. Excludes CAM (as modified).
What is a Straight Shaft? 15829 Items: A Straight Shaft (SHAFT,STRAIGHT) is a straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.o25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items designed to support rotating members see AXLE(1), STRAIGHT. For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Detent Plate? 343 Items: A Detent Plate is a metallic item usually flat, having toothlike projections on the periphery, specifically designed to engage a PAWL for the purpose of regulating and/or locking a brake, clutch lever, or the like, in a definite position.
What is a Bell Crank? 3727 Items: A Bell Crank is an item in the form of two arms at an angle, having its fulcrum at the apex of the angle, and used to provide a means of changing the direction or varying the intensity of a pushing or pulling force. See also ARM (as modified); and LEVER (as modified).
What is a Grease Cap? 205 Items: A Grease Cap (CAP,GREASE) is a cap, usually of metal, designed to retain lubricant and excludes foreign matter from bearings. It is normally used as an end closure on items designed to rotate on a shaft,such as a wheel hub, or fit into a housing at the end of a rotating shaft, or the like. Do not use if a more specific name applies. For items mounted by bolt holes, see COVER, ACCESS.
What is a Shouldered Shaft? 29810 Items: A Shouldered Shaft (SHAFT,SHOULDERED) is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
What is a Brake Drum Adapter? 22 Items: A Brake Drum Adapter (ADAPTER,BRAKE DRUM) is a rigid circular shaped metal item, with a centrally located aperture. It is specifically designed to mount or secure a brake drum to a wheel hub. It is a component of a brake drum. Excludes PLATE, BACKING, BRAKE.
What is a Hydraulic Accumulator Cylinder? 173 Items: A Hydraulic Accumulator Cylinder (CYLINDER,HYDRAULIC ACCUMULATOR) is a cylinder designed to house a piston and other necessary component parts of a hydraulic accumulator.
What is a Hub Clamp? 1266 Items: A Hub Clamp (CLAMP,HUB) is an item designed to be mounted around the extended hub portion of a gear, wheel, or the like, to retain it securely to a shaft by compressing the slotted hub body. The item may also be used to clamp around a shaft, or the like, to prevent end motion or to retain it in position. Its compression quality is derived from a screw(s) or bolt(s) which may be a part of the item of supply. For items designed to secure directly to a shaft by use of setscrews, pins, or the like, see COLLAR, SHAFT. Excludes CLAMP, LOOP.
What is a Body Hub? 2588 Items: A Body Hub (HUB,BODY) is a cylindrical shoulder type item designed to be mounted and secured directly on a shaft or axle to position and retain on its body a gear(s), wheel(s), or the like. Items must have a method of securing directly to the shaft; however, a pilot hole drilled in or through the wall of the shoulder may be considered a method of securing; or by compressing the slotted hub end on the shaft by a hub clamp, which may or may not be included. Excludes BEARING, SLEEVE; BUSHING, SLEEVE; and COLLAR, SHAFT.
What is a Linear Actuating Cylinder Assembly Parts Kit? 1699 Items: A Linear Actuating Cylinder Assembly Parts Kit (PARTS KIT,LINEAR ACTUATING CYLINDER ASSEMBLY) is a collection of various o-rings, seals, sleeves, wear rings and gaskets to repair actuating cylinders. May include cylinder and mounting hardware.
What is a Hydraulic Accumulator Bladder? 113 Items: A Hydraulic Accumulator Bladder (BLADDER,ACCUMULATOR,HYDRAULIC) is an item fabricated from a flexible material, to be used in conjunction with an ACCUMULATOR, HYDRAULIC for the purpose of alleviating line shock and to equalize and maintain a predetermined pressure. It may include an integrally molded valve.
What is a Friction Lining Set? 73 Items: A Friction Lining Set (LINING SET,FRICTION) is two or more friction linings grouped together for a clutch, brake, or the like. For items whose component parts do not have the same basic name, see PARTS KIT (as modified). See also BRAKE LINING KIT.
What is a Brake Shoe? 414 Items: A Brake Shoe is a metal item in the shape of an arc, with or without a replaceable friction lining on the surface of the shoe arc. When actuated by a cam, lever and/or hydraulic cylinder, it exerts pressure on a drum or wheel. Also, see BRAKE, SHOE TYPE.
What is a Linear Actuating Cylinder Assembly? 10869 Items: A Linear Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,LINEAR) is a cylinder containing a piston and other component parts designed to develop linear motion required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). See also CYLINDER, ACTUATING, LINEAR. Do not use if a more specific name applies.
What is a Brake Band And Lining? 325 Items: A Brake Band And Lining is a circular shaped flexible steel device, having a replaceable friction lining, designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion.
What is a Disk Brake Shoe? 151 Items: A Disk Brake Shoe is a replaceable metal plate, usually affixed with a fabric friction lining as the contact pad surface. It may be of circular, kidney, or rectangular shape. When mounted in a caliper cylinder housing, between brake disk and hydraulic or pneumatic piston(s), or wheel and caliper lever, it is so designed that actuated pressure, on the shoe friction pad, will retard or stop motion. Excludes BRAKE, DUAL DISK; BRAKE, SINGLE DISK; BRAKE SHOE; and DISK, BRAKE.
What is a Disk Brake Shoe Set? 56 Items: A Disk Brake Shoe Set is a group of replacement components consisting of two or more DISK BRAKE SHOE, usually affixed with a fabric friction lining as the contact pad surface. They may be of circular, kidney, or rectangular shape. They are so designed that, when mounted in a caliper cylinder housing, actuated pressure on the shoe friction pad will retard or stop motion. Excludes: BRAKE, DUAL DISK; BRAKE, SINGLE DISK.
Parts Kit,Ball Joint 19 Items
What is a Brake Shoe Parts Kit? 20 Items: A Brake Shoe Parts Kit (PARTS KIT,BRAKE SHOE) is a collection of items consisting of one or more LINING, FRICTION and brake shoe frame(s) with or without fastening devices such as rivets, bolts, nuts, bonding agents, and the like. For kits with additional items, see PARTS KIT, SHOE BRAKE. For assembled items, see BRAKE SHOE; BRAKE SHOE SET, INTERNALLY ACTUATED. See also LINING SET, FRICTION; BRAKE LINING KIT.
Parts Kit,Gearbox 91 Items
Parts Kit,Oil Pan 16 Items
What is a Counterbalance Weight? 4446 Items: A Counterbalance Weight (WEIGHT,COUNTERBALANCE) is a weight designed to overcome static and/or dynamic unbalance of a rotating part or a rotating assembly. It may be of various shapes and designs.
What is a Pneumatic Actuator Cylinder Housing? 191 Items: A Pneumatic Actuator Cylinder Housing (HOUSING,CYLINDER,PNEUMATIC ACTUATOR) is a housing designed to support and/or protect the driving mechanism of a pneumatic actuator cylinder. It may include a shaft, bearings, seals, snap-rings, and the like.
What is a Belt-Chain Tension Adjusting Device? 272 Items: A Belt-Chain Tension Adjusting Device (ADJUSTING DEVICE,BELT-CHAIN TENSION) is a device designed to facilitate the adjustment of drive belt or roller chain tension on belt or chain driven accessories through a hydraulic or spring actuated mechanism. It consists of an adjusting arm, idler pulley or sprocket wheel and other structural parts.
What is a Bell Crank Support? 233 Items: A Bell Crank Support (SUPPORT,BELL CRANK) is an item used to maintain the position of the pivot point of one or more BELL CRANK by the use of pins or studs. Consists of body and pins or studs. Excludes BELL CRANK.
What is a Disc Brake Caliper Assembly? 67 Items: A Disc Brake Caliper Assembly (CALIPER ASSEMBLY,DISC BRAKE) is a U-shaped device with a floating, sliding or fixed mounting design. A device by which force is applied by mechanical, hydraulic, vacuum, or pneumatic actuation to slow or bring to a stop, a rotating rotor disc. It may contain any number of associated parts, such as pistons which may be offset or opposed to each other, caliper housings, bolts, support springs, bushings, sleeves, shields, bleed screws, dust boot, shoe retainers and the like. May also include brake-pads with assembled linings. Excludes rotor discs.
What is a Disc Brake Caliper? 61 Items: A Disc Brake Caliper (CALIPER,DISC BRAKE) is a U-shaped device designed to house associated parts such as pistons, support springs, bushings, sleeves, shields, bleed screw, dust boot, shoe retainers, brake pads/linings, and the like. Excludes any repair parts or components.
What is a Rotary Actuating Cylinder Assembly? 254 Items: A Rotary Actuating Cylinder Assembly (CYLINDER ASSEMBLY,ACTUATING,ROTARY) is a cylinder containing a piston and other component parts designed to develop rotary motion (limited to less than 360 degrees) required to operate a given object(s) with energy generated from either pneumatic or hydraulic pressure(s). Do not use if a more specific name applies.
What is an Electrical-Fluid Pressure Connector Assembly? 163 Items: An Electrical-Fluid Pressure Connector Assembly (CONNECTOR ASSEMBLY,ELECTRICAL-FLUID PRESSURE) is an item which has integral connections for electrical power and fluid pressure. It provides a continuation of power and pressure during the rotation of a bucket, cupola or turret. It usually is mounted in the axial center below the center line of the rotating unit. It may provide passages for fluid in the non-power state, such as ventilatory air in a closed system. It may not provide separate functions if disassembled. Excludes RING, ELECTRICAL CONTACT.
What is a Push-Pull Control Assembly Parts Kit? 26 Items: A Push-Pull Control Assembly Parts Kit (PARTS KIT,PUSH-PULL CONTROL ASSEMBLY) is a parts kit used to repair a CONTROL ASSEMBLY, PUSH-PULL.
Wheel Assembly,Brake,Hose Reel 31 Items
Shaft And Spring Assembly,Pressure Regulator 33 Items
End Cap,Outer Shaft,Air Clutch 17 Items
Hub,Range Clutch,Transmission 58 Items
Shaft,Clutch,Transfer Drive 122 Items
Pivot Shaft Assembly 427 Items
What is a Shaft Idler? 214 Items: A Shaft Idler (IDLER,SHAFT) is a straight or shouldered shaft specifically designed to provide mounting facilities or used in conjunction with an idler pulley gear, sprocket or the like.
What is a Piston Rod Ring? 611 Items: A Piston Rod Ring (RING,ROD,PISTON) is a circular, single or multipiece item, metallic or nonmetallic in composition. Designed for sealing, wiping and/or supporting a ROD, PISTON. It may have different sectional shapes.
Housing,Alteration 63 Items
Sleeve,Transmission 209 Items
Fitting,Lever 139 Items
Cup,Piston Follower 34 Items
What is a Piston Rod Guide? 264 Items: A Piston Rod Guide (GUIDE,PISTON ROD) is an item with an axial hole through which a piston rod slides. It may have coaxial holes to permit the free flow of hydraulic fulid, and the like. The fluid flow holes may permit the use of a spanner wrench to install the item. Excludes BUSHING, MACHINE THREAD.
What is a Shoe Brake Parts Kit? 39 Items: A Shoe Brake Parts Kit (PARTS KIT,SHOE BRAKE) is any group of BRAKE SHOE components which may include rollers, pins, springs, bushings, and the like, with or without BRAKE SHOE(s) or LINING FRICTION. See also PARTS KIT, BRAKE SHOE.
What is a Straight Axle? 2615 Items: A Straight Axle (AXLE,STRAIGHT) is a straight axle having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (0.025 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. It is not designed for use in aliging by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see GEARSHAFT (as modified). For items not having the above conditions see PIN, STRAIGHT, HEADLESS. For items used to transmit motion see SHAFT, STRAIGHT. For items having machined ends which constitute steps see AXLE(1), SHOLDERED. Excludes SHAFT(1), SHOULDERED; and BOLT, FLUID PASSAGE.
What is a Shouldered Axle? 1620 Items: A Shouldered Axle (AXLE,SHOULDERED) is an axle having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers), periphersl flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or sholders may be machined to accommodate bearings couplings and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to transmit motion see SHAFT(1), SHOULDER. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1),STRAIGHT; and AXLE(1), STRAIGHT.
What is a Shouldered Shaft Assembly? 935 Items: A Shouldered Shaft Assembly (SHAFT ASSEMBLY,SHOULDERED) is an assembly which consists of a SHAFT, SHOULDERED and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Brake Shoe Set? 46 Items: A Brake Shoe Set is a group of replacement parts consisting of two or more BRAKE SHOE. It may include retaining springs, washers, shoe guide pins and the like. Excludes items furnished with backing plate, spider and/or hydraulic wheel cylinder(s), shoe segment sets for brake expander tubes, and BRAKE (as modified).
What is a Disc Brake Caliper Parts Kit? 21 Items: A Disc Brake Caliper Parts Kit (PARTS KIT,CALIPER,DISC BRAKE) is a group of parts used for the repair or replacement of worn or damaged parts of a CALIPER, DISC BRAKE.
What is a Control Cable Assembly? 526 Items: A Control Cable Assembly (CABLE ASSEMBLY,CONTROL) is an assembly of wire cables fitted to runners, guides, levers and the like to remotely operate controls.
What is a Control Pedal Assembly? 57 Items: A Control Pedal Assembly (PEDAL ASSEMBLY,CONTROL) is a device consisting of several PEDAL, CONTROL which are mechanically interconnected and/or have a common mounting. A bracket may be included. Excludes CONVERSION KIT, VEHICLE, DRIVING SCHOOL; PEDAL, CONTROL.
What is a Ballscrew Assembly? 40 Items: A Ballscrew Assembly is a self-contained power transmitting device designed to convert rotary motion to linear (straight line) mechanical movement. Must be comprised of a ball nut, pillow block(s), screw shaft and such accessories as required for the specific moving and positioning of other components.
What is a Housing Adapter? 664 Items: A Housing Adapter (ADAPTER,HOUSING) is an item which allows another item to be attached to one of a different size or to a mount, bulkhead, wall, and the like. It may protect the joint/union formed by shafts or connectors which project beyond the respective items. Different mounting hole arrangements permit attachment to each item.
What is a Manual Control Lever Assembly? 458 Items: A Manual Control Lever Assembly (LEVER ASSEMBLY,MANUAL CONTROL) is two or more LEVER, MANUAL CONTROL on a common mounting designed to manually actuate and/or regulate a variety of mechanisms.
What is a Cylinder Support? 317 Items: A Cylinder Support (SUPPORT,CYLINDER) is an item used to support and align one or more CYLINDER ASSEMBLY, ACTUATING, LINEAR. It may have facilities to be attached to the item(s) supported. It is with or without mounting devices such as flanges, etc.
What is a Multiple Gears Gearshaft? 1028 Items: A Multiple Gears Gearshaft (GEARSHAFT,MULTIPLE GEARS) is a gearshaft with more than one complement of teeth.
What is a Mechanically Actuated Spindle? 935 Items: A Mechanically Actuated Spindle (SPINDLE,MECHANICALLY ACTUATED) is a drive shaft with external thread(s) and with machined bearing surface(s) and/or drive mechanisms other than a hub at one or both ends. The item mates with a cam, gear segment or lead nut and the like and may be used for actuating and power transmission purposes. Bearings may be included. Excludes GEAR RACK and WORM SHAFT. (Replaces SPINDLE, ACTUATOR, MECHANICAL)
Arm,Brake 45 Items
What is a Shaft-Hub Clamp-Bushing Assembly? 129 Items: A Shaft-Hub Clamp-Bushing Assembly (CLAMP-BUSHING ASSEMBLY,SHAFT-HUB) is a detachable clamping connection between a shaft and a hub. The connection is effected by friction and transmits high torque ratings without backlash. The item usually consists of a slotted conical inner and outer ring, clamp screws, thrust collar and the like. It may have an adjustable nonpositive connection and is not suitable as a sliding clutch. Excludes CLUTCH ASSEMBLY, FRICTION; COUPLING, SHAFT, FLEXIBLE; and COUPLING, SHAFT, RIGID.
What is a Mechanical Drive Housing Part? 508 Items: A Mechanical Drive Housing Part (HOUSING PART,MECHANICAL DRIVE) is a rigid item of differing shape which together with at least one other housing section forms a HOUSING, MECHANICAL DRIVE.
What is a Clutch Torsion Bar? 15 Items: A Clutch Torsion Bar (TORSION BAR,CLUTCH) is a straight metal item having a solid or tubular/circular cross section with serrations, flats, or the like on each end. It is designed to withstand a severe twisting action along its longitudinal axis while being held fast at the ends. It is used in heavy duty marine type clutches. Excludes TORSION BAR, SUSPENSION.
What is a Helical Gear And Shaft Assembly? 129 Items: A Helical Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,HELICAL) is an unenclosed assembly of a helical gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEAR SHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Bevel Gear And Shaft Assembly? 110 Items: A Bevel Gear And Shaft Assembly (GEAR AND SHAFT ASSEMBLY,BEVEL) is an unenclosed assembly of a bevel gear(s) and a shaft(s). The gear(s) and shaft(s) must be capable of being separated from each other. Excludes GEARSHAFT (as modified) and GEAR CLUSTER (as modified).
What is a Spline Adapter? 208 Items: A Spline Adapter (ADAPTER,SPLINE) is an item for connecting two sets of grooves/keys (as of different diameters), changing groove/key size and/or spacing, or for changing groove/key configuration for uses not originally intended.
What is a Control Cam Assembly? 112 Items: A Control Cam Assembly (CAM ASSEMBLY,CONTROL) is two or more CAM,CONTROL having a common mounting or mounted on each other. Excludes CAMSHAFT (as modified).
What is a Straight Shaft Assembly? 670 Items: A Straight Shaft Assembly (SHAFT ASSEMBLY,STRAIGHT) is an assembly which consists of a SHAFT, STRAIGHT and components such as couplings, flanges, and the like. The shaft and components are usually welded together.
What is a Shaft And Tube Support Assembly? 41 Items: A Shaft And Tube Support Assembly is an item consisting of a metallic rod which is welded or permanently attached to a metallic tube. It holds and/or supports a reel rack for wire rope or the like.
What is an Oil Distribution Box Shaft Assembly? 23 Items: An Oil Distribution Box Shaft Assembly (SHAFT ASSEMBLY,OIL DISTRIBUTION BOX) is an item which consists of an outer telescope shaft extension which are precision ground matched. It distributes hydraulic oil throughout the propulsion system.
What is a Power Transmission Equipment Brake Band? 46 Items: A Power Transmission Equipment Brake Band (BRAKE BAND,POWER TRANSMISSION EQUIPMENT) is a circular shaped flexible metallic device used in miscellaneous power transmission equipment. It is designed to contract upon the outer surface or expand against the inner surface of a drum to retard or stop motion. Does not include the lining.
What is a Nonvehicular Propeller Shaft? 307 Items: A Nonvehicular Propeller Shaft (PROPELLER SHAFT,NONVEHICULAR) is a nonvehicular item with a yoke on one or both ends. The yoke(s) may include a spider. If only one yoke, the opposite end may have a shaft or tube. For items with a universal joint see PROPELLER SHAFT WTIH UNIVERSAL JOINT (as modified). Also see YOKE, UNIVERSAL JOINT (as modified). For fixed wing aircraft see PROPELLER, SHAFT, FIXED WING AIRCRAFT.
What is a Planetary Gears Carrier? 160 Items: A Planetary Gears Carrier (CARRIER,PLANETARY GEARS) is an item designed to support and position the rotating planet gears while transmitting torque in a mechanical or hydraulic type power transmission. Excludes: CARRIER,PLANETARY REDUCTION GEAR,NONAIRCRAFT GAS TURBINE ENGINE; CARRIER PLANETARY REDUCTION GEAR,AIRCRAFT GAS TURBINE ENGINE; CARRIER,GEAR ASSEMBLY; CARRIER,PLANETARY REDUCTION GEAR, TURBINE ENGINE.
What is a Nonaircraft Mechanical Actuator? 1028 Items: A Nonaircraft Mechanical Actuator (ACTUATOR,MECHANICAL,NONAIRCRAFT) is a mechanical power-transmiting device, not for aircraft application, designed to create controlled force in the form of linear or rotational movement. Excludes ACTUATOR, MECHANICAL, AIRCRAFT
What is a Hydraulic Control Assembly? 216 Items: A Hydraulic Control Assembly (CONTROL ASSEMBLY,HYDRAULIC) is an item consisting of (a) control lever(s) and (an) hydraulic block(s) containing a distribution slide, a regulating spring, a pusher and the like. They are designed to control hydraulic components such as pumps, motors and distributors and the like.
What is a Control Cam? 7048 Items: A Control Cam (CAM,CONTROL) is an irregularly shaped item, that revolves around an axis, or slides within limits, which actuates other parts by contact to change the direction, speed and/or timing of a part in motion. A shaft is not included. It usually is part of a CAMSHAFT (as modified).
What is an Inertia Damper? 257 Items: An Inertia Damper (DAMPER,INERTIA) is an item specifically designed to be attached to an electrically or mechanically driven shaft for the purpose of retarding speed, and minimizing oscillation, vibration and free spinning.
What is a Brake Disc? 738 Items: A Brake Disc (DISC,BRAKE) is a flat circular metallic item, a component of a disk type brake used primarily for frictional purposes.
What is a Bevel Gearshaft? 1352 Items: A Bevel Gearshaft (GEARSHAFT,BEVEL) is a gearshaft with a single complement of bevel gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1),MULTIPLE GEARS. For items specifically designed for an AXLE ASSEMBLY,AUTOMOTIVE DRIVING see SHAFT,AXLE,AUTOMOTIVE.
What is a Bevel-Spur Gearshaft? 120 Items: A Bevel-Spur Gearshaft (GEARSHAFT,BEVEL-SPUR) is a gearshaft with one or more complements of bevel gear teeth and one or more complements of spur gear teeth.
What is a Helical Gearshaft? 1470 Items: A Helical Gearshaft (GEARSHAFT,HELICAL) is a gearshaft with a single complement of helical gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Helical-Spur Gearshaft? 216 Items: A Helical-Spur Gearshaft (GEARSHAFT,HELICAL-SPUR) is a gearshaft with one or more complements of helical gear teeth and one or more complements of spur gear teeth.
What is a Spur Gearshaft? 10210 Items: A Spur Gearshaft (GEARSHAFT,SPUR) is a gearshaft with a single complement of spur gear teeth. For items with more than one complement of teeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Worm Wheel Gearshaft? 445 Items: A Worm Wheel Gearshaft (GEARSHAFT,WORM WHEEL) is a gearshaft with a single complement of worm wheel gear teeth. For items with more than one complement of theeth, see GEARSHAFT (1), MULTIPLE GEARS.
What is a Mechanical Drive Housing? 6038 Items: A Mechanical Drive Housing (HOUSING,MECHANICAL DRIVE) is an item fabricated from a single, internally cored casting, or composed of two or more separate castings, and designed to position and protect bearings, shafts, gears, and/or other components required for a mechanical drive. Includes items having access hole(s) to facilitate machining and assembling of components. It may include the access hole cover plate(s).
What is a Controllable Swashplate? 117 Items: A Controllable Swashplate (SWASHPLATE,CONTROLLABLE) is an item designed for mounting on a shaft and having controllable universal action with respect to the shaft. It is used for receiving and transferring camlike action parallel to the shaft.
What is a Manual Control Lever? 7610 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Linear Actuating Cylinder Cap? 804 Items: A Linear Actuating Cylinder Cap (CAP,LINEAR ACTUATING CYLINDER) is an item designed to attach to and enclose the cylinder bore of a linear actuating cylinder opposite the actuating end. It may have facilities for mounting the actuating cylinder assembly. The item may include ports, valves, and the like. For items on the actuating end, see HEAD, LINEAR ACTUATING CYLINDER.
What is a Linear Actuating Cylinder Piston? 3479 Items: A Linear Actuating Cylinder Piston (PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item which moves or reciprocates in a linear actuating cylinder to convert fluid energy to mechanical force. It may include an integral rod.
What is a Linear Actuating Cylinder Piston Rod? 1850 Items: A Linear Actuating Cylinder Piston Rod (ROD,PISTON,LINEAR ACTUATING CYLINDER) is a cylindrical item with one end designed to mate with the piston of a linear actuating cylinder. The external end is designed for the attachment of a connection or the connection may be an integral part of the rod. The rod is designed to extend through a linear actuating cylinder cap, or the like.
What is an Accumulator Cap? 102 Items: An Accumulator Cap (CAP,ACCUMULATOR) is a cap having inlet and/or outlet ports. It is designed to mate with the end(s) of a hydraulic or pneumatic accumulator cylinder.
What is a Linear Actuating Cylinder Head? 678 Items: A Linear Actuating Cylinder Head (HEAD,LINEAR ACTUATING CYLINDER) is an item designed to attach to the actuating end of a linear cylinder. It has an orifice to accommodate a piston rod and packing, bearing, or the like to retain fluid in the cylinder assembly. The item may include ports, valves, and the like. For items opposite the actuating end, see CAP, LINEAR ACTUATING CYLINDER.
What is a Differential Gear Unit? 253 Items: A Differential Gear Unit is an arrangement of gears in an epicyclic train that connects two shafts in the same line. The driving force is equally divided between the shafts which rotate in different directions with one shaft permitted to revolve faster than the other.
What is a Hydraulic Accumulator Piston Rod? 78 Items: A Hydraulic Accumulator Piston Rod (ROD,PISTON,HYDRAULIC ACCUMULATOR) is a basically cylindrical item designed to mate with the piston(s) of a hydraulic accumulator.
What is a Speedometer-Tachometer Drive Adapter? 253 Items: A Speedometer-Tachometer Drive Adapter (ADAPTER,SPEEDOMETER-TACHOMETER DRIVE) is an adapter designed to attach the speedometer or tachometer drive shaft to the vehicle transmission, engine, or the like.
What is a Band Type Brake? 21 Items: A Band Type Brake (BRAKE,BAND TYPE) is a circular shaped flexible or hinged device, and an attached replaceable friction lining with associated engagement and release linkage. It stops or slows the motion of revolving elements by contracting upon the outer surface or expanding upon the inner surface of a drum.
What is a Tension Spring Assembly? 71 Items: A Tension Spring Assembly is a device that exerts constant mechanical tension or pressure against anothe r item by means of a spring, nut and bolt, arm, roller and the like. This item may include a quick release handle or lever to release tension and allow free travel when necessary for manual operation, adjustment or maintenance.
What is a Pneumatic Control Assembly? 38 Items: A Pneumatic Control Assembly (CONTROL ASSEMBLY,PNEUMATIC) is a item generally consisting of a control lever and an pneumatic block containing a distribution slide, a regulating spring, a pusher and the like. It is designed to control pneumatic components such as pumps, motors and distributors and the like.
What is a Mechanical Power Transmission Equipment Installation Kit? 14 Items: A Mechanical Power Transmission Equipment Installation Kit (INSTALLATION KIT,MECHANICAL POWER TRANSMISSION EQUIPMENT) is a collection of items which is designed to install power transmission equipment.

Stock Items From Supply Class 3040 Page 1of 575

3040-01-009-3814
Manual Contro Lever

010093814
01009403: RNCC: 3 | RNVC: 2
1-5907: RNCC: 3 | RNVC: 2
1-5904: RNCC: 3 | RNVC: 2
160034: RNCC: 3 | RNVC: 2
ES0160: RNCC: 5 | RNVC: 2
68005: RNCC: 5 | RNVC: 2
1-5919: RNCC: 5 | RNVC: 9
68005: RNCC: 5 | RNVC: 9
73173900: RNCC: 5 | RNVC: 9
88101325FIND2: RNCC: 5 | RNVC: 9

11 Sep 1975

3040-00-394-6380
Shouldered Shaft

003946380
SMS-BS5-1708: RNCC: 3 | RNVC: 2
UM1: RNCC: 3 | RNVC: 2
11268: RNCC: 5 | RNVC: 2
A-0598: RNCC: 5 | RNVC: 2
394-6380: RNCC: 5 | RNVC: 2
2073PC66T068: RNCC: 5 | RNVC: 9
BS1193PC79T081: RNCC: 5 | RNVC: 9
BS5-1788PC84: RNCC: 5 | RNVC: 9
BS5-1791PC84: RNCC: 5 | RNVC: 9
BS5-1711PC79T081: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-627-2728
Hub Clamp

006272728
503755: RNCC: 3 | RNVC: 2
SC313: RNCC: 3 | RNVC: 2
E105632PC13: RNCC: 3 | RNVC: 2
CG125: RNCC: 3 | RNVC: 2
L4-3: RNCC: 3 | RNVC: 2
134375-003: RNCC: 5 | RNVC: 2
843990-1: RNCC: 5 | RNVC: 2
215-002-0005: RNCC: 5 | RNVC: 2
41245-1: RNCC: 5 | RNVC: 2
SC-313: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-574-8314
Diese Cylinder Head

015748314
3096663: RNCC: 3 | RNVC: 2
CV180484: RNCC: 5 | RNVC: 2
309-6663: RNCC: 5 | RNVC: 2

10 Jun 2009

3040-01-670-2703
Tandem A Torque Rod

016702703
5238-1: RNCC: 3 | RNVC: 2

13 Feb 2018

3040-01-700-7113
Controll Swashplate

017007113
SB1570-101: RNCC: 3 | RNVC: 2

8 Apr 2022

3040-01-353-0746
Pu Control Assembly

013530746
410-M-3IN X 62IN LG: RNCC: 3 | RNVC: 2
211059461: RNCC: 5 | RNVC: 2
593-6405224 PIECE 88: RNCC: 5 | RNVC: 2
593-6405224-88: RNCC: 5 | RNVC: 2
410M003-063: RNCC: 5 | RNVC: 2
410-M-3-5-3: RNCC: 5 | RNVC: 2
211059461: RNCC: 5 | RNVC: 2
593-6405224 ITEM 88: RNCC: 5 | RNVC: 2
211037715: RNCC: 5 | RNVC: 2
593-6405225 PIECE 88: RNCC: 5 | RNVC: 2

5 Feb 1992

3040-01-483-4568
Control Cam

014834568
845-7108907 ITEM 14: RNCC: 3 | RNVC: 2
845-7108906 ITEM 19: RNCC: 5 | RNVC: 2
845-7108535 ITEM 15: RNCC: 5 | RNVC: 2
2643-825-89 ITEM 14: RNCC: 5 | RNVC: 2
2643-825-91 ITEM 39: RNCC: 5 | RNVC: 2
2643-825-85 ITEM 15: RNCC: 5 | RNVC: 2
2643-744-01 ITEM 19: RNCC: 5 | RNVC: 2
845-7286651 ITEM 39: RNCC: 5 | RNVC: 2
7108535: RNCC: D | RNVC: 9
7108907: RNCC: D | RNVC: 9

29 Mar 2001

3040-01-545-4134
Aile Balance Weight

015454134
65-1091-2: RNCC: 3 | RNVC: 2

13 Nov 2006

3040-01-600-4014
Shouldered Stud

016004014
120-233-3N: RNCC: 3 | RNVC: 2
120-233-3N: RNCC: 5 | RNVC: 2
120-233-3N: RNCC: 5 | RNVC: 2
120-233-3N: RNCC: 5 | RNVC: 2

27 Nov 2011

3040-00-614-6953
Remote Contro Lever

006146953
69-8976: RNCC: 3 | RNVC: 2

1 Jan 1963

3040-00-275-7024
Ball Joint

002757024
115-002: RNCC: 3 | RNVC: 9
16727: RNCC: 5 | RNVC: 2
192227: RNCC: 5 | RNVC: 2
192227: RNCC: 5 | RNVC: 9
192227: RNCC: 5 | RNVC: 9
62A46014: RNCC: 5 | RNVC: 9
329765: RNCC: 5 | RNVC: 9
23882: RNCC: 5 | RNVC: 9
329765: RNCC: 5 | RNVC: 9
CCB23882: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-065-2021
Breather

010652021
K1103007: RNCC: 3 | RNVC: 2
445416C2: RNCC: 3 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9
A11422: RNCC: 5 | RNVC: 9
ZAJ9006001P: RNCC: 5 | RNVC: 9
445416C1: RNCC: 5 | RNVC: 9
9006001: RNCC: 5 | RNVC: 9

10 Sep 1978

3040-01-566-9590
Brake Drum

015669590
E72012052: RNCC: 3 | RNVC: 2
SA72012052: RNCC: 5 | RNVC: 9

15 Sep 2008

3040-01-124-3810
Manual Contro Lever

011243810
1011628: RNCC: 3 | RNVC: 2
55755C101: RNCC: 5 | RNVC: 9
755C101: RNCC: 5 | RNVC: 9
1FM: RNCC: 5 | RNVC: 9
910-168PC 20: RNCC: 5 | RNVC: 9
410B008: RNCC: 5 | RNVC: 9
1C F91363 8INCH: RNCC: C | RNVC: 1
1F3: RNCC: C | RNVC: 1
410-009: RNCC: C | RNVC: 1
1C: RNCC: C | RNVC: 1

1 Jan 1982

3040-01-438-4886
A Cylinder Assembly

014384886
NZ10EEXX3KW120RS-HB102F0: RNCC: 3 | RNVC: 2
7A8-08506: RNCC: 3 | RNVC: 2
7D3-05185 IT NO 5: RNCC: 5 | RNVC: 2
7D3-04979 IT NO 5: RNCC: 5 | RNVC: 2
7D3-04987 IT NO 5: RNCC: 5 | RNVC: 2
7D3-04940 IT NO 5: RNCC: 5 | RNVC: 2
NZ10EEXX3KW120RS-HB102F0: RNCC: 5 | RNVC: 2
TG10EWXX3AACA950: RNCC: 5 | RNVC: 9
CA950: RNCC: 5 | RNVC: 9
NZ10EWXX3AACA950: RNCC: 5 | RNVC: 9

8 Nov 1996

3040-01-301-4284
Wiper Ring

013014284
5032-5/8: RNCC: 3 | RNVC: 2

27 May 1989

3040-01-284-6310
Straight Shaft

012846310
196B8945-2: RNCC: 3 | RNVC: 2
196B8945-2: RNCC: 5 | RNVC: 2

26 Aug 1988

3040-01-600-4020
Shouldered Stud

016004020
120-216P40K: RNCC: 3 | RNVC: 2
120-216P40K: RNCC: 5 | RNVC: 2
120-216P40K: RNCC: 5 | RNVC: 2
120-216P40K: RNCC: 5 | RNVC: 2

27 Nov 2011

3040-01-599-4749
Universal Join Yoke

015994749
170-82-21X: RNCC: 3 | RNVC: 2
2500661C91: RNCC: 5 | RNVC: 2

29 Sep 2011

3040-13-120-5391
Straight Axle

131205391
3634891420: RNCC: 3 | RNVC: 2

16 Feb 2009

3040-01-159-3395
Elev Balance Weight

011593395
50-6237-3010: RNCC: 3 | RNVC: 2

6 Aug 1983

3040-01-257-8896
Propeller Shaft Wit

012578896
416 337 21 10: RNCC: 3 | RNVC: 2
SA000083455301001: RNCC: 5 | RNVC: 2
042-194-96250: RNCC: 5 | RNVC: 2
416 337 21 10: RNCC: 5 | RNVC: 2
416 337 08 00: RNCC: 5 | RNVC: 2
416 337 08 00: RNCC: 5 | RNVC: 9
416 337 21 10: RNCC: 5 | RNVC: 9

25 Jun 1987

3040-01-135-3055
Aile Balance Weight

011353055
50-2477-17: RNCC: 3 | RNVC: 2

21 Jul 1982

3040-00-741-8491
Flexible Shaft Core

007418491
M10215-1F409: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
7418491: RNCC: 5 | RNVC: 1
1582034: RNCC: 5 | RNVC: 1
418049-77: RNCC: 5 | RNVC: 9
MIL-S-10215: RNCC: 5 | RNVC: 9
418049-77 1-2: RNCC: 5 | RNVC: 9
MS51072-9: RNCC: 5 | RNVC: 9
1582034: RNCC: 5 | RNVC: 9
SPS1012W: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-567-0518
Hub Clamp

005670518
9360130-2: RNCC: 3 | RNVC: 2
L1-11: RNCC: 3 | RNVC: 2
711699-040: RNCC: 5 | RNVC: 2
711699-40: RNCC: 5 | RNVC: 2
9147C5035-2: RNCC: 5 | RNVC: 9
3040PL0733101: RNCC: 6 | RNVC: 9
3040005670518: RNCC: 6 | RNVC: 9
9360130: RNCC: 7 | RNVC: 1
9147C5035-2: RNCC: 7 | RNVC: 2
59127-2: RNCC: C | RNVC: 1

1 Jan 1961

3040-00-338-3409
Shaft Retaining Plate

003383409
S4700H3114129PC3: RNCC: 3 | RNVC: 2
R136-35: RNCC: 5 | RNVC: 2
10042CC4: RNCC: 5 | RNVC: 2
53509-0070: RNCC: 5 | RNVC: 2
266276: RNCC: 5 | RNVC: 2
DD927S5801-765256ITEM24: RNCC: 5 | RNVC: 2
H3115277PC35: RNCC: 5 | RNVC: 2
A3114155: RNCC: 5 | RNVC: 2
H3115277PC35: RNCC: 5 | RNVC: 9
R140PC35: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-01-005-3280
Shouldered Shaft

010053280
664-27518-000: RNCC: 3 | RNVC: 2
376L602/AE902 ITEM 20: RNCC: 5 | RNVC: 2
005418321/20: RNCC: 5 | RNVC: 2
664-27518: RNCC: 5 | RNVC: 2
376L602/AE902/20: RNCC: 5 | RNVC: 2
005418321 ITEM 20: RNCC: 5 | RNVC: 2
064-27518D: RNCC: 5 | RNVC: 9
664-27518: RNCC: 5 | RNVC: 9
064-27518-000: RNCC: 5 | RNVC: 9
364-37846PC61: RNCC: 5 | RNVC: 9

23 Jun 1975

3040-00-895-2363
Aile Balance Weight

008952363
65-1091-18: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-895-2362
Aile Balance Weight

008952362
65-1091-16: RNCC: 3 | RNVC: 2

1 Jan 1962

3040-00-791-2744
Rig Connecting Link

007912744
3-73054-1: RNCC: 3 | RNVC: 2
SR10587A1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2
3-73054-1: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-766-2959
Straight Shaft

007662959
12298086: RNCC: 3 | RNVC: 2
1064486G001: RNCC: 5 | RNVC: 2
319918-1: RNCC: 5 | RNVC: 2
1064486: RNCC: 5 | RNVC: 2
5800334-2150-012: RNCC: 5 | RNVC: 2
A1-10: RNCC: 5 | RNVC: 2
319918-1: RNCC: 5 | RNVC: 9
1064486: RNCC: 5 | RNVC: 9
1064486: RNCC: 5 | RNVC: 9
3040PL0664069: RNCC: 6 | RNVC: 9

1 Jan 1962

3040-01-426-2466
Pu Control Assembly

014262466
CCX63311: RNCC: 3 | RNVC: 2
301947-003-132: RNCC: 3 | RNVC: 9
CC23011: RNCC: 5 | RNVC: 2
6893071 PC 219: RNCC: 5 | RNVC: 2
301947-003-11FT: RNCC: 5 | RNVC: 9
301947-003-11FT: RNCC: 5 | RNVC: 9
33C-003-11FT: RNCC: 5 | RNVC: 9
33C-003-132: RNCC: 5 | RNVC: 9
33C-003-132: RNCC: 5 | RNVC: 9
D044194-003-11FT: RNCC: 5 | RNVC: 9

7 Mar 1996

3040-01-566-6001
Mounting Bracket

015666001
820410: RNCC: 3 | RNVC: 2
3684390C3: RNCC: 5 | RNVC: 2
3684390C1: RNCC: 5 | RNVC: 9

4 Sep 2008

3040-00-383-6757
Lever Shoe

003836757
T756000: RNCC: 3 | RNVC: 2
74ND6074: RNCC: 3 | RNVC: 9
T756000: RNCC: 5 | RNVC: 9
74ND6074: RNCC: 5 | RNVC: 9
74ND6047: RNCC: 5 | RNVC: 9
756005: RNCC: 5 | RNVC: 9
ND6534PC74: RNCC: 5 | RNVC: 9
74ND6047: RNCC: 5 | RNVC: 9
756005: RNCC: 5 | RNVC: 9
ND6534PC74: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-233-1103
Elev Balance Weight

002331103
50-6237-3009: RNCC: 3 | RNVC: 2
50-6237-3009: RNCC: 5 | RNVC: 2
50-6237-3009: RNCC: 5 | RNVC: 2
50-6237-3009: RNCC: 5 | RNVC: 2
50-6237-3009: RNCC: 5 | RNVC: 2
50-6237-3009: RNCC: 5 | RNVC: 2
50-6237-3009: RNCC: 5 | RNVC: 2
50-6237-3009: RNCC: 5 | RNVC: 2
50-6237-3009: RNCC: 5 | RNVC: 2
50-6237-3009: RNCC: 5 | RNVC: 2

24 Oct 1970

3040-01-575-6462
Linear Actuatin Cap

015756462
STM 343-4249: RNCC: 3 | RNVC: 2
WWS 7003942: RNCC: 3 | RNVC: 9

10 Jul 2009

3040-01-598-9024
Pump Shaft Sleeve

015989024
N20020C: RNCC: 3 | RNVC: 2

31 Aug 2011

3040-01-589-6349
Rig Connecting Link

015896349
3897891: RNCC: 3 | RNVC: 2
3897891: RNCC: 5 | RNVC: 9

1 Nov 2010

3040-01-482-2936
Bell Crank

014822936
L6410380-005: RNCC: 3 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2
L6410380-005: RNCC: 5 | RNVC: 2

14 Feb 2001

3040-00-390-8843
Straight Shaft

003908843
PT-822: RNCC: 3 | RNVC: 2
5192251: RNCC: 5 | RNVC: 2
519225: RNCC: 5 | RNVC: 9
266663R1: RNCC: 5 | RNVC: 9
266663R1: RNCC: 5 | RNVC: 9
K3307: RNCC: 5 | RNVC: 9
5192251: RNCC: 5 | RNVC: 9
4-410-140 ITEM 014: RNCC: 5 | RNVC: 9
2-778-998-06431: RNCC: 5 | RNVC: 9
5192251: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-256-7161
Clutch Cy Diaphragm

012567161
1139G34-7: RNCC: 3 | RNVC: 2
1105-0036: RNCC: 5 | RNVC: 2
D1704ADF ITEM 14: RNCC: 5 | RNVC: 9
DGR4350B PT70F: RNCC: 5 | RNVC: 9
D1704ADF: RNCC: D | RNVC: 9

8 Jun 1987

3040-01-608-4963
Axle Weldment

016084963
3847835: RNCC: 3 | RNVC: 2
3847835: RNCC: 5 | RNVC: 9

28 Jun 2012

3040-01-426-2463
Pu Control Assembly

014262463
301947-003-17FT: RNCC: 3 | RNVC: 2
D044194-003-17FT: RNCC: 5 | RNVC: 2
316832-3-204: RNCC: 5 | RNVC: 2
301947-003-17FT: RNCC: 5 | RNVC: 2
33C-003-17FT: RNCC: 5 | RNVC: 2
D044194-003-204: RNCC: 5 | RNVC: 2
6893071 PC 218: RNCC: 5 | RNVC: 2
301947-003-204: RNCC: 5 | RNVC: 2
33C-003-204: RNCC: 5 | RNVC: 2
33C-003-17FT: RNCC: 5 | RNVC: 9

7 Mar 1996

3040-99-956-0289
Piston Ring Set

999560289
STD845-2: RNCC: 3 | RNVC: 2
STD845-2: RNCC: 5 | RNVC: 2
STD845-2: RNCC: 5 | RNVC: 2
S32152-7001-99PH: RNCC: 5 | RNVC: 9
STD845-2: RNCC: 5 | RNVC: 9

19 Sep 1991

3040-99-667-5604
Straight Shaft

996675604
PE30013: RNCC: 3 | RNVC: 2

27 Jan 2010

3040-01-440-5402
Pu Control Assembly

014405402
CCX63340: RNCC: 3 | RNVC: 2
301947-003-40FT: RNCC: 5 | RNVC: 2
33C-480 IN.: RNCC: 5 | RNVC: 9
301947-003-480: RNCC: 5 | RNVC: 9
33C-480 IN.: RNCC: 5 | RNVC: 9
D044194-003-40FT: RNCC: 5 | RNVC: 9
301947-003-480: RNCC: 5 | RNVC: 9
301947-003-40FT: RNCC: 5 | RNVC: 9
D044194-003-40FT: RNCC: 5 | RNVC: 9
D044194-003-480: RNCC: 5 | RNVC: 9

16 Jan 1997

3040-01-589-1993
Adjustment Spider

015891993
R190,622: RNCC: 3 | RNVC: 9

20 Oct 2010

3040-01-546-4146
Por Liquid Dispensing Tank And Pump Unit

015464146
061477-100: RNCC: 3 | RNVC: 2

14 Dec 2006

3040-00-709-3693
Rig Connecting Link

007093693
2-73224-1: RNCC: 3 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
2-73224-1: RNCC: 5 | RNVC: 2
SR10721A501: RNCC: 5 | RNVC: 9
14-73909-1: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-99-740-6180
Cont Cable Assembly

997406180
3-A-077-0365: RNCC: 3 | RNVC: 2
3A077-0365: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-01-563-5139
Hexagon H Cap Screw

015635139
3944679: RNCC: 3 | RNVC: 2

13 May 2008

3040-01-135-3054
Aileron Balance Weight

011353054
65-2312-8: RNCC: 3 | RNVC: 2

21 Jul 1982

3040-01-729-0576
Hydra Bleeder Valve

3040-00-388-0944
Steam Turbine Shaft

003880944
KMC-SG3709-114: RNCC: 3 | RNVC: 2
11319: RNCC: 3 | RNVC: 2
S2819JA: RNCC: 3 | RNVC: 2
SG2956PC107: RNCC: 5 | RNVC: 2
SG2802PC111: RNCC: 5 | RNVC: 2
SG3709PC114: RNCC: 5 | RNVC: 2
G9695PC110: RNCC: 5 | RNVC: 2
G9696PC107: RNCC: 5 | RNVC: 2
SG2881APC78: RNCC: 5 | RNVC: 2
SG3973PC110: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-544-9130
Aile Balance Weight

015449130
65-1091-3: RNCC: 3 | RNVC: 2

26 Oct 2006

3040-01-600-4016
Shouldered Stud

016004016
120-194P25K: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-524-7622
Diesel Engine Cylinder Head

015247622
300-9551: RNCC: 3 | RNVC: 2
2195845: RNCC: 5 | RNVC: 9

15 Oct 2004

3040-99-470-6532
Lever And Pad Assem

994706532
1731-3040: RNCC: 3 | RNVC: 2
1731-3040: RNCC: 5 | RNVC: 9

20 Feb 1990

3040-01-546-4129
Tank And Pump Unit

015464129
061475-100: RNCC: 3 | RNVC: 2
061475-100: RNCC: 5 | RNVC: 2

14 Dec 2006

3040-01-595-3766
Intern Piston Crown

015953766
238-2701: RNCC: 3 | RNVC: 2

26 Apr 2011

NSN 3040-01-186-3718 011863718 CONNECTING LINK,RIG

3040-01-186-3718
Rig Connecting Link

011863718
12338323: RNCC: 3 | RNVC: 2
0723224: RNCC: 5 | RNVC: 2
5569941-C: RNCC: 5 | RNVC: 2
EC12338323: RNCC: 5 | RNVC: 9
947130: RNCC: 5 | RNVC: 9
940150: RNCC: 5 | RNVC: 9
5569941: RNCC: 5 | RNVC: 9
3040011863718: RNCC: 5 | RNVC: 9
12338323: RNCC: 5 | RNVC: 9
3040PL0645426: RNCC: 6 | RNVC: 9

10 Aug 1984

3040-12-162-2482
Counterbalan Weight

121622482
18575-01: RNCC: 3 | RNVC: 2
800060: RNCC: 3 | RNVC: 2

30 May 1969

3040-01-572-3890
Clutch Shaft Piston

015723890
29542815: RNCC: 3 | RNVC: 2

10 Mar 2009

3040-01-570-7966
Spur Gearshaft

015707966
12488586: RNCC: 1 | RNVC: 2
3-080-041-36: RNCC: 3 | RNVC: 2
3-080-041-36: RNCC: 3 | RNVC: 2
3040015707966: RNCC: 6 | RNVC: 9
3-080-041-04: RNCC: E | RNVC: 8
3-080-041-23: RNCC: E | RNVC: 8
3-080-041-35: RNCC: E | RNVC: 8
3-080-041-35: RNCC: E | RNVC: 8
3-080-041-23: RNCC: E | RNVC: 8
3-080-041-35: RNCC: E | RNVC: 8

14 Jan 2009

3040-01-719-0108
Key Torsion Spring

017190108
60177725: RNCC: 3 | RNVC: 2

3040-17-115-3428
Marine Door Wear Plate

171153428
945367: RNCC: 3 | RNVC: 2
C945367: RNCC: 5 | RNVC: 2

23 Dec 2002

3040-13-120-5392
Headed Straight Pin

131205392
3634981420: RNCC: 3 | RNVC: 2

16 Feb 2009

3040-00-152-2458
Mechanicall Spindle

001522458
CO2306-001: RNCC: 3 | RNVC: 2
CO2306-001: RNCC: 3 | RNVC: 9
AC2306-1: RNCC: 5 | RNVC: 9
3N112PC72: RNCC: 5 | RNVC: 9
NN76PC72: RNCC: 5 | RNVC: 9
NN100PC72: RNCC: 5 | RNVC: 9
3N111PC72: RNCC: 5 | RNVC: 9
3N82PC72: RNCC: 5 | RNVC: 9
NN-19-1 SYMBOL 72: RNCC: 5 | RNVC: 9
NN84PC72: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-99-776-5702
Manual Contro Lever

997765702
75A427220-1001: RNCC: 3 | RNVC: 2
75A427220: RNCC: 5 | RNVC: 1

25 Apr 1991

3040-01-154-6944
Rig Connecting Link

011546944
74A450996-1003: RNCC: 3 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
74A450996-1003: RNCC: 5 | RNVC: 2
PL74A450996 REV A: RNCC: 5 | RNVC: 9
74A450996-1003: RNCC: 5 | RNVC: 9
74A450996-1003: RNCC: 5 | RNVC: 9
74A450996-1003: RNCC: 5 | RNVC: 9

29 May 1983

3040-00-084-6729
Aile Balance Weight

000846729
69-21080-3: RNCC: 3 | RNVC: 2
69-21080-3: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-251-9948
Lever Bracket

012519948
5148884: RNCC: 3 | RNVC: 2
002162T: RNCC: 5 | RNVC: 2

27 Mar 1987

3040-01-600-4002
Shouldered Stud

016004002
120-237-1J: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-4010
Shouldered Stud

016004010
120-237-3M: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-4013
Shouldered Stud

016004013
120-233-3J: RNCC: 3 | RNVC: 2
120-233-3J: RNCC: 5 | RNVC: 2
120-233-3J: RNCC: 5 | RNVC: 2
120-233-3J: RNCC: 5 | RNVC: 2

27 Nov 2011

3040-01-594-3665
Electrical Swi Stop

015943665
12041-6124-01: RNCC: 3 | RNVC: 2
12041-6084-01: RNCC: 5 | RNVC: 9

25 Apr 2011

3040-00-017-9539
Ammunition Fee Pawl

000179539
8448543: RNCC: 3 | RNVC: 2
CF62269: RNCC: 5 | RNVC: 2
62269: RNCC: 5 | RNVC: 2
1005000179539: RNCC: 6 | RNVC: 9
10050179539: RNCC: 6 | RNVC: 9

1 Jan 1961

3040-00-360-3902
Hub Clamp

003603902
4B4715: RNCC: 3 | RNVC: 2
117: RNCC: 3 | RNVC: 2
X117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
117: RNCC: 5 | RNVC: 2
18Z94: RNCC: 5 | RNVC: 2
0P691: RNCC: 5 | RNVC: 2
TDC117: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-00-239-4823
Shaft Collar

002394823
10188086-001: RNCC: 3 | RNVC: 2
AD-2331062-017: RNCC: 5 | RNVC: 1
SC150: RNCC: 5 | RNVC: 2
52E768-40: RNCC: 5 | RNVC: 2
SC-1 1/2: RNCC: 5 | RNVC: 2
32X117: RNCC: 5 | RNVC: 2
67719: RNCC: 5 | RNVC: 2
D1489C: RNCC: 5 | RNVC: 9
M19383: RNCC: 5 | RNVC: 9
M21375: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-067-9045
Hub Clamp

000679045
L1-6: RNCC: 3 | RNVC: 1
CG73: RNCC: 5 | RNVC: 1
1596848P1: RNCC: 5 | RNVC: 9
10399487: RNCC: 6 | RNVC: 9
5267293-003: RNCC: C | RNVC: 1
409708-4: RNCC: C | RNVC: 1
2673205-3: RNCC: C | RNVC: 1
1596848P1REV1: RNCC: C | RNVC: 1
832 00019 00: RNCC: C | RNVC: 1
1596848: RNCC: D | RNVC: 9

5 Jul 1967

3040-00-163-0400
Spur Gearshaft

001630400
99121620: RNCC: 3 | RNVC: 2
A1259PC56: RNCC: 5 | RNVC: 9
A1279PC56: RNCC: 5 | RNVC: 9
A1280PC56: RNCC: 5 | RNVC: 9
A1354MPC56: RNCC: 5 | RNVC: 9
A1351PC56: RNCC: 5 | RNVC: 9
A1352PC56: RNCC: 5 | RNVC: 9
A1353MPC56: RNCC: 5 | RNVC: 9
A1990PC56: RNCC: 5 | RNVC: 9
A2045PC56: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-055-3739
Straight Shaft

000553739
4840915H05: RNCC: 3 | RNVC: 2
A3-17: RNCC: 3 | RNVC: 2
AAS-A4-7: RNCC: 3 | RNVC: 2
967: RNCC: 3 | RNVC: 2
SS121: RNCC: 5 | RNVC: 2
G4-14: RNCC: 5 | RNVC: 2
GS-306: RNCC: 5 | RNVC: 2
4840915H05: RNCC: 5 | RNVC: 2
S4-17: RNCC: 5 | RNVC: 9
S4-17: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-233-1119
Elev Balance Weight

002331119
50-6237-3043: RNCC: 3 | RNVC: 2

24 Oct 1970

3040-00-149-2515
Shouldered Shaft

001492515
99121609: RNCC: 3 | RNVC: 2
A1338PC55: RNCC: 5 | RNVC: 2
A1354MP55: RNCC: 5 | RNVC: 2
A1250PC55: RNCC: 5 | RNVC: 2
A1353MP55: RNCC: 5 | RNVC: 2
A1353MPC55: RNCC: 5 | RNVC: 2
A1232PC69: RNCC: 5 | RNVC: 2
A1736MPC55: RNCC: 5 | RNVC: 2
A1249PC55: RNCC: 5 | RNVC: 2
A1354MPC55: RNCC: 5 | RNVC: 2

1 Jan 1961

3040-01-600-4004
Shouldered Stud

016004004
120-237-1N: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-4005
Shouldered Stud

016004005
120-237-2J: RNCC: 3 | RNVC: 2
120-237-2J: RNCC: 3 | RNVC: 2
120-237-2J: RNCC: 3 | RNVC: 2
120-237-2J: RNCC: 5 | RNVC: 9

27 Nov 2011

3040-01-600-4009
Shouldered Stud

016004009
120-237-2N: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-4000
Shouldered Stud

016004000
120-230-1K: RNCC: 1 | RNVC: 2
120-230-1K: RNCC: 3 | RNVC: 2
120-230-1K: RNCC: 3 | RNVC: 2
120-230-1K: RNCC: 3 | RNVC: 2
120-230-1K: RNCC: 3 | RNVC: 9

27 Nov 2011

3040-01-284-6311
Straight Shaft

012846311
196B8945-5: RNCC: 3 | RNVC: 2
196B8945-5: RNCC: 5 | RNVC: 2

26 Aug 1988

3040-01-600-4019
Shouldered Stud

016004019
120-216P40L: RNCC: 3 | RNVC: 2
120-216P40L: RNCC: 5 | RNVC: 2
120-216P40L: RNCC: 5 | RNVC: 2
120-216P401: RNCC: 5 | RNVC: 2

27 Nov 2011

3040-01-231-6955
Spur Gearshaft

012316955
0435020: RNCC: 3 | RNVC: 2
0435020: RNCC: 3 | RNVC: 9
5004938: RNCC: 5 | RNVC: 2
435020: RNCC: 5 | RNVC: 9
5004216: RNCC: 5 | RNVC: 9
391289: RNCC: 5 | RNVC: 9
5004216: RNCC: 5 | RNVC: 9
434026: RNCC: 5 | RNVC: 9
435020: RNCC: 5 | RNVC: 9
391289: RNCC: 5 | RNVC: 9

2 May 1986

3040-01-556-6258
Vehicular C Bracket

015566258
3613733C1: RNCC: 3 | RNVC: 2

3 Oct 2007

3040-00-695-7189
Flexible Shaft Core

006957189
M10215-1F410: RNCC: 2 | RNVC: 2
MIL-DTL-10215: RNCC: 4 | RNVC: 1
MS51072-10: RNCC: 5 | RNVC: 9
MIL-S-10215: RNCC: 5 | RNVC: 9
7527481: RNCC: 5 | RNVC: 9
1580833: RNCC: 5 | RNVC: 9
1580833: RNCC: 5 | RNVC: 9
418049-85: RNCC: 5 | RNVC: 9
914173: RNCC: 5 | RNVC: 9
6680006957189: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-128-9332
Rig Connecting Link

011289332
1534AS286: RNCC: 3 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 2
1534AS286: RNCC: 5 | RNVC: 9
1534AS286: RNCC: 5 | RNVC: 9
D013537-501: RNCC: 5 | RNVC: 9
D013537-501: RNCC: 5 | RNVC: 9
10143581: RNCC: 6 | RNVC: 9

27 Mar 1982

3040-01-311-7458
Aile Balance Weight

013117458
69-17040-4: RNCC: 3 | RNVC: 2

5 Dec 1989

3040-01-182-6298
Spur Gear

011826298
305-101-603-0: RNCC: 3 | RNVC: 2

22 Sep 2011

3040-01-526-2941
A Cylinder Assembly

015262941
200-0996: RNCC: 3 | RNVC: 2
200996: RNCC: 5 | RNVC: 9

14 Dec 2004

3040-01-545-9466
A Cylinder Assembly

015459466
37393: RNCC: 3 | RNVC: 2
2000927: RNCC: 5 | RNVC: 2

30 Nov 2006

3040-01-426-0770
Nonrota Eye Bracket

014260770
212-011-701-125: RNCC: 3 | RNVC: 2

4 Mar 1996

3040-01-600-4001
Shouldered Stud

016004001
120-230-1L: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-384-1141
Stop-Check Valve

013841141
3818849: RNCC: 3 | RNVC: 2
3818849: RNCC: 5 | RNVC: 2
10431152: RNCC: 6 | RNVC: 9

8 Dec 1993

3040-01-600-4023
Shouldered Stud

016004023
120-161P25K: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-00-843-4388
Straight Shaft

008434388
A3-20: RNCC: 3 | RNVC: 2
12282301-3: RNCC: 3 | RNVC: 2
4188809-1: RNCC: 5 | RNVC: 2
4188809-1: RNCC: 5 | RNVC: 2
888-9541: RNCC: 5 | RNVC: 9
S4-20: RNCC: 5 | RNVC: 9
S4-20: RNCC: 5 | RNVC: 9
3040008434388: RNCC: 5 | RNVC: 9
G4-16: RNCC: 5 | RNVC: 9
G4-16: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-611-4133
Detachable Link

016114133
45215: RNCC: 3 | RNVC: 2

13 Sep 2012

3040-01-080-9587
Wiper Ring

010809587
D95142: RNCC: 3 | RNVC: 2

5 Aug 1979

3040-00-315-0549
Control Tube Assemb

003150549
90-1468-4: RNCC: 3 | RNVC: 2
90-1468-4: RNCC: 5 | RNVC: 2
90-1468-4: RNCC: 5 | RNVC: 2
90-1468-4: RNCC: 5 | RNVC: 2
90-1468-4: RNCC: 5 | RNVC: 2
90-1468-4: RNCC: 5 | RNVC: 2
90-1468-4: RNCC: 5 | RNVC: 2
90-1468-4: RNCC: 5 | RNVC: 2
90-1468-4: RNCC: 5 | RNVC: 2
90-1468-4: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-298-8624
Wiper Ring

012988624
119-B2238: RNCC: 3 | RNVC: 2

22 Apr 1989

3040-01-600-4011
Plain Stud

016004011
120-237-3N: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-600-4003
Shouldered Stud

016004003
120-237-1M: RNCC: 3 | RNVC: 2
120-237-1M: RNCC: 5 | RNVC: 2
120-237-1M: RNCC: 5 | RNVC: 2

27 Nov 2011

3040-00-354-6873
Rig Connecting Link

003546873
020040651/2-04651: RNCC: 3 | RNVC: 2
CL8557: RNCC: 5 | RNVC: 2
DDE 05 05193421: RNCC: 5 | RNVC: 2
266696R1: RNCC: 5 | RNVC: 9
5193421: RNCC: 5 | RNVC: 9
266696R1: RNCC: 5 | RNVC: 9
P28797: RNCC: 5 | RNVC: 9
P28797: RNCC: 5 | RNVC: 9
266696R1: RNCC: 5 | RNVC: 9
K3301: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-375-8523
Rig Connecting Link

003758523
524605: RNCC: 3 | RNVC: 2
62472: RNCC: 5 | RNVC: 2
62646-2PC31: RNCC: 5 | RNVC: 2
62669-2PC31: RNCC: 5 | RNVC: 2
62472: RNCC: 5 | RNVC: 2
A62472PCALL: RNCC: 5 | RNVC: 2
62654-2PC31: RNCC: 5 | RNVC: 2
62669-6ITEM2: RNCC: 5 | RNVC: 2
62644-2PC53: RNCC: 5 | RNVC: 2
62644-2PC53: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-00-233-1101
Elev Balance Weight

002331101
50-6237-3033: RNCC: 3 | RNVC: 2
50-6237-3033: RNCC: 5 | RNVC: 2

24 Oct 1970

3040-99-609-2451
Brake Disc Rim

996092451
N199879: RNCC: 3 | RNVC: 2
N199879: RNCC: 5 | RNVC: 2

25 Apr 1991

3040-00-233-1127
Elev Balance Weight

002331127
50-6237-3022: RNCC: 3 | RNVC: 2

24 Oct 1970

3040-01-590-8100
Motional Transducer

015908100
AS4CM15117: RNCC: 3 | RNVC: 2
24KP397: RNCC: 5 | RNVC: 2
24KP397: RNCC: 5 | RNVC: 9

22 Dec 2010

3040-01-140-0266
Rig Connecting Link

011400266
74A450913-2003: RNCC: 3 | RNVC: 2
74A450913-2003: RNCC: 5 | RNVC: 2
74A450913-2003: RNCC: 5 | RNVC: 2
74A450913-2003: RNCC: 5 | RNVC: 2
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9
74A450913-2003: RNCC: 5 | RNVC: 9

7 Oct 1982

3040-00-734-7714
Multiple Gearshaft

007347714
10092R1: RNCC: 3 | RNVC: 2
62-30-9: RNCC: 5 | RNVC: 2
T406-3: RNCC: 5 | RNVC: 2
100092R1: RNCC: 5 | RNVC: 2
7347714: RNCC: 5 | RNVC: 2
62-30-9: RNCC: 5 | RNVC: 2
2345414: RNCC: 5 | RNVC: 9
100092R1: RNCC: 5 | RNVC: 9
316696: RNCC: 5 | RNVC: 9
801E679: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-600-4008
Shouldered Stud

016004008
120-237-3J: RNCC: 1 | RNVC: 2
120-237-3J: RNCC: 3 | RNVC: 2
120-237-3J: RNCC: 5 | RNVC: 2
120-237-3J: RNCC: 5 | RNVC: 9

27 Nov 2011

3040-01-600-4006
Shouldered Stud

016004006
120-237-2M: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-107-6785
Straight Shaft

011076785
74A450966-2005: RNCC: 3 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 2
74A450966-2005: RNCC: 5 | RNVC: 9
74A450966-2005: RNCC: 5 | RNVC: 9
74A450966-2005: RNCC: 5 | RNVC: 9
74A450966-2005: RNCC: 5 | RNVC: 9

11 Feb 1981

3040-01-284-6312
Straight Shaft

012846312
196B8945-7: RNCC: 3 | RNVC: 2
196B8945-7: RNCC: 5 | RNVC: 2

26 Aug 1988

3040-01-107-5697
Rig Connecting Link

011075697
74A450993-1001: RNCC: 3 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 2
74A450993-1001: RNCC: 5 | RNVC: 9
74A450993-1001: RNCC: 5 | RNVC: 9
74A450993-1001: RNCC: 5 | RNVC: 9

8 Feb 1981

3040-01-195-6125
Governor Va Adapter

011956125
106048: RNCC: 3 | RNVC: 2
900005: RNCC: 3 | RNVC: 2
106035: RNCC: 3 | RNVC: 2
106035: RNCC: 5 | RNVC: 2
106035: RNCC: 5 | RNVC: 9
106048: RNCC: 5 | RNVC: 9
106035: RNCC: 5 | RNVC: 9
106048: RNCC: 5 | RNVC: 9
106035: RNCC: 5 | RNVC: 9
106048: RNCC: 5 | RNVC: 9

30 Nov 1984

3040-01-442-2357
Rudd Balance Weight

014422357
66-8335-13: RNCC: 3 | RNVC: 2

8 Mar 1997

3040-13-120-5385
Straight Axle

131205385
3634851420: RNCC: 3 | RNVC: 2

16 Feb 2009

3040-01-286-0306
Lever Bracket

012860306
6289588: RNCC: 3 | RNVC: 2
0740581: RNCC: 5 | RNVC: 2

24 Sep 1988

3040-00-734-0816
Carrier As Gear Set

007340816
6837507: RNCC: 3 | RNVC: 2
3021218: RNCC: 5 | RNVC: 2
73021218: RNCC: 5 | RNVC: 2
L35636: RNCC: 5 | RNVC: 2
6773610: RNCC: 5 | RNVC: 9
6768808: RNCC: 5 | RNVC: 9
6773610: RNCC: 5 | RNVC: 9
3021218: RNCC: 5 | RNVC: 9
3021218-7: RNCC: 5 | RNVC: 9
6837507: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-723-1336
Mirror As Parts Kit

017231336
84724663: RNCC: 3 | RNVC: 2

3040-01-131-1903
Straight Shaft

011311903
9350018: RNCC: 3 | RNVC: 2
3000021021: RNCC: 5 | RNVC: 2
711531509301: RNCC: 5 | RNVC: 9

6 May 1982

3040-01-600-4021
Shouldered Stud

016004021
120-161P25L: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-722-1450
Headed Straight Pin

017221450
845-6655309-19-2: RNCC: 3 | RNVC: 2
2640-682-09-19-2: RNCC: 5 | RNVC: 2
6655309 SHEET 10A FIND 19-2: RNCC: C | RNVC: 1
6655309 REV B: RNCC: D | RNVC: 9

3040-01-483-5429
A Cylinder Assembly

014835429
335-6220: RNCC: 3 | RNVC: 2
201-4257: RNCC: 3 | RNVC: 9
3172440: RNCC: 5 | RNVC: 9
101-0830: RNCC: 5 | RNVC: 9

2 Apr 2001

3040-00-388-2945
Shouldered Shaft

003882945
P16 608 831N: RNCC: 3 | RNVC: 9
16608831: RNCC: 5 | RNVC: 2
AFC5041A: RNCC: 5 | RNVC: 9
CAFB5041A: RNCC: 5 | RNVC: 9
AFB5041A: RNCC: 5 | RNVC: 9
MAFB2435DPC15: RNCC: 5 | RNVC: 9
MAAFB2435APC15-24: RNCC: 5 | RNVC: 9
NAFB5041A: RNCC: 5 | RNVC: 9
16608831: RNCC: 5 | RNVC: 9
16608831: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-115-5585
Rig Connecting Link

011155585
74A410765-1001: RNCC: 3 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 2
74A410765-1001: RNCC: 5 | RNVC: 9
74A410765-1001: RNCC: 5 | RNVC: 9
74A410765-1001: RNCC: 5 | RNVC: 9
74A410765-1001: RNCC: 5 | RNVC: 9
74A410765-1001: RNCC: 5 | RNVC: 9

9 Jul 1981

3040-00-892-2506
Shaft Collar

008922506
G67-4: RNCC: 3 | RNVC: 2
SC0-4-6: RNCC: 3 | RNVC: 2
032804: RNCC: 3 | RNVC: 2
C1-3: RNCC: 3 | RNVC: 2
EH2-3: RNCC: 5 | RNVC: 2
100006-01: RNCC: 5 | RNVC: 2
378A151G01: RNCC: 5 | RNVC: 2
378A151G01: RNCC: 5 | RNVC: 2
A302-14-3: RNCC: 5 | RNVC: 2
9072114: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-00-528-1997
Friction Lining

005281997
6479E: RNCC: 3 | RNVC: 2
9488: RNCC: 5 | RNVC: 2
6B0187: RNCC: 5 | RNVC: 2
45550-009-02: RNCC: 5 | RNVC: 9
6B187: RNCC: 5 | RNVC: 9
XA5079PC6479S: RNCC: 5 | RNVC: 9
C108PC6479S: RNCC: 5 | RNVC: 9
CL108PC6479S: RNCC: 5 | RNVC: 9
TD6479S: RNCC: 5 | RNVC: 9
6479S: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-400-3077
Hub Clamp

004003077
AC250: RNCC: 3 | RNVC: 2
SM-B-890008-1: RNCC: 5 | RNVC: 2
S3501Y-C066: RNCC: 5 | RNVC: 2
L4-5: RNCC: 5 | RNVC: 9
P1-8: RNCC: 5 | RNVC: 9
C66: RNCC: 5 | RNVC: 9
LU-2 SPECIAL ALUMINUM: RNCC: 5 | RNVC: 9
CG1-9A: RNCC: 5 | RNVC: 9
AC250: RNCC: 5 | RNVC: 9
5189113-002: RNCC: 7 | RNVC: 2

12 Mar 1969

3040-01-107-7543
Rig Connecting Link

011077543
74A450920-2001: RNCC: 3 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 2
74A450920-2001: RNCC: 5 | RNVC: 9

12 Feb 1981

3040-01-344-6404
Elev Balance Weight

013446404
69-4627-802: RNCC: 3 | RNVC: 2

4 Sep 1991

3040-01-442-1737
Pu Control Assembly

014421737
CC23022: RNCC: 3 | RNVC: 2
3009-075-0671: RNCC: 5 | RNVC: 2
D032377-003-22FT: RNCC: 5 | RNVC: 9
D032377-003-264IN: RNCC: 5 | RNVC: 9
32377-003-264IN: RNCC: 5 | RNVC: 9
32377-003-264IN: RNCC: 5 | RNVC: 9
33C-264IN: RNCC: 5 | RNVC: 9
032377-003-264.0: RNCC: 5 | RNVC: 9
33C-22FT: RNCC: 5 | RNVC: 9
D032377-003-264IN: RNCC: 5 | RNVC: 9

6 Mar 1997

3040-00-903-4942
Ball Socket Seat

009034942
522-5489289 ITEM 25: RNCC: 3 | RNVC: 2
76682-47X11PC6: RNCC: 5 | RNVC: 2
125-2119057PC6: RNCC: 5 | RNVC: 2
H8832416: RNCC: C | RNVC: 1

10 Jun 1966

3040-01-600-4012
Shouldered Stud

016004012
120-233-3M: RNCC: 3 | RNVC: 2
120-233-3M: RNCC: 5 | RNVC: 2
120-233-3M: RNCC: 5 | RNVC: 2
120-233-3M: RNCC: 5 | RNVC: 2

27 Nov 2011

3040-00-528-8736
Flexible Shaft Core

005288736
1581430: RNCC: 3 | RNVC: 9
581430: RNCC: 5 | RNVC: 2
100730R91: RNCC: 5 | RNVC: 2
111576R91: RNCC: 5 | RNVC: 2
7355825: RNCC: 5 | RNVC: 2
7413487: RNCC: 5 | RNVC: 2
G418049-87-1-2: RNCC: 5 | RNVC: 9
100730R91: RNCC: 5 | RNVC: 9
111576R91: RNCC: 5 | RNVC: 9
KC8721: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-159-3399
Elev Balance Weight

011593399
50-6237-3035: RNCC: 3 | RNVC: 2

6 Aug 1983

3040-01-160-1115
Elev Balance Weight

011601115
50-6237-3027: RNCC: 3 | RNVC: 2

17 Aug 1983

3040-01-236-1295
Electric Brake

012361295
1-087-632-00-MLB: RNCC: 3 | RNVC: 2

12 Jul 1986

3040-01-600-4015
Shouldered Stud

016004015
120-182P20L: RNCC: 1 | RNVC: 2
120-182P20L: RNCC: 3 | RNVC: 2
120-182P20L: RNCC: 3 | RNVC: 2
120-182P20L: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-156-0575
Manual Control Lever

011560575
0P9011EY: RNCC: 3 | RNVC: 2
2246260: RNCC: 5 | RNVC: 2
0P90011EY: RNCC: 5 | RNVC: 9
40397A-005: RNCC: 5 | RNVC: 9
2246260: RNCC: 5 | RNVC: 9
138-1: RNCC: 5 | RNVC: 9
15003: RNCC: 5 | RNVC: 9
45A212: RNCC: 5 | RNVC: 9
40397A: RNCC: 5 | RNVC: 9
10550-2: RNCC: 5 | RNVC: 9

18 Jun 1983

3040-01-566-9783
Automoti Axle Shaft

015669783
0943-PP2-260: RNCC: 3 | RNVC: 2
0943-PP2-260: RNCC: 5 | RNVC: 2
0928-PP2-260: RNCC: 5 | RNVC: 9
0943-PP2: RNCC: D | RNVC: 9

15 Sep 2008

3040-01-242-3076
Universal Join Yoke

012423076
2-3-7691X: RNCC: 3 | RNVC: 2
90970F1: RNCC: D | RNVC: 9

9 Oct 1986

3040-01-227-7171
Wiper Ring

012277171
920256-15: RNCC: 3 | RNVC: 2
920256-15: RNCC: 5 | RNVC: 9
S30395-15G5: RNCC: 5 | RNVC: 9
S30395-15G5: RNCC: 5 | RNVC: 9
920256-15: RNCC: 5 | RNVC: 9

7 Mar 1986

3040-01-292-1710
Universal Join Yoke

012921710
4-4-2051-1: RNCC: 3 | RNVC: 2
L116944: RNCC: 5 | RNVC: 2

12 Jan 1989

3040-01-311-7457
Aile Balance Weight

013117457
60-2641-3002: RNCC: 3 | RNVC: 2

5 Dec 1989

3040-01-361-2508
Straight Spacer

013612508
2W-7381: RNCC: 3 | RNVC: 2
2W-7381: RNCC: 5 | RNVC: 2
CV134201: RNCC: 5 | RNVC: 2
2W7381: RNCC: 5 | RNVC: 2
2W7381: RNCC: 5 | RNVC: 2
23KP288: RNCC: 7 | RNVC: 2

11 Jul 1992

3040-01-114-3011
Wiper Ring

011143011
CEC401-341-01: RNCC: 3 | RNVC: 2

16 Jun 1981

3040-01-497-6850
Mechanical Housing

014976850
845-4687404 ASSY 223: RNCC: 3 | RNVC: 2
2641-792-03 ASSY 223: RNCC: 3 | RNVC: 2
501-7066644-1: RNCC: 5 | RNVC: 2
501-7066649-6: RNCC: 5 | RNVC: 2
H525-7606-1: RNCC: 5 | RNVC: 2
H525-7611-6: RNCC: 5 | RNVC: 2
845-4687407 ASS: RNCC: C | RNVC: 1
H525-7606: RNCC: D | RNVC: 9
4687404: RNCC: D | RNVC: 9
2641-792-03: RNCC: D | RNVC: 9

30 May 2002

3040-00-419-5816
Manual Contro Lever

004195816
02324100: RNCC: 3 | RNVC: 2
D40687: RNCC: 5 | RNVC: 2
01020306: RNCC: 5 | RNVC: 9
95000521: RNCC: 5 | RNVC: 9
01191200: RNCC: 5 | RNVC: 9
01020300: RNCC: 5 | RNVC: 9
14580: RNCC: 5 | RNVC: 9
95000521: RNCC: 5 | RNVC: 9
6110C42-682: RNCC: 5 | RNVC: 9
01-020300: RNCC: 5 | RNVC: 9

2 Dec 1970

3040-00-499-3479
Shouldered Shaft

004993479
A5783: RNCC: 3 | RNVC: 2
5164460: RNCC: 5 | RNVC: 9
18438PCA5783: RNCC: 5 | RNVC: 9
X8708APC81: RNCC: 5 | RNVC: 9
N32250PC81: RNCC: 5 | RNVC: 9
5164460: RNCC: 5 | RNVC: 9
5164460: RNCC: 5 | RNVC: 9
N1062PCA5783: RNCC: 5 | RNVC: 9
5164460: RNCC: 5 | RNVC: 9
X8708APCA5783: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-196-0070
Rig Connecting Link

011960070
74A410593-2001: RNCC: 3 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 2
74A410593-2001: RNCC: 5 | RNVC: 9
74A410593-2001: RNCC: 5 | RNVC: 9
74A410593-2001: RNCC: 5 | RNVC: 9

5 Dec 1984

3040-01-101-9831
Rig Connecting Link

011019831
70400-01250-043: RNCC: 3 | RNVC: 2
700400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
1100010-043: RNCC: 5 | RNVC: 9
2012-1: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9
70400-01250-043: RNCC: 5 | RNVC: 9

10 Oct 1980

3040-01-461-9970
Sleeve Bushing

014619970
5883679-102: RNCC: 3 | RNVC: 2
5883679-102: RNCC: 5 | RNVC: 2

14 Jan 1999

3040-01-252-5865
Universal Jo Spider

012525865
212-011-704-105: RNCC: 3 | RNVC: 2

5 Apr 1987

3040-01-544-9128
Aile Balance Weight

015449128
65-1091-1: RNCC: 3 | RNVC: 2

26 Oct 2006

3040-01-179-3042
Linear A Piston Rod

011793042
101A821AA PIECE 1: RNCC: 3 | RNVC: 2
501E457AA PIECE 37: RNCC: 3 | RNVC: 2
3133849: RNCC: 5 | RNVC: 2
501E457AA PIECE 37: RNCC: 5 | RNVC: 9
101A821AA PIECE 1: RNCC: 5 | RNVC: 9
101A821AA1: RNCC: 5 | RNVC: 9
E-3288508 PIECE 37: RNCC: 5 | RNVC: 9
101A821AA PIECE 1: RNCC: 5 | RNVC: 9
501E457AA PIECE 37: RNCC: 5 | RNVC: 9
101A821AA: RNCC: D | RNVC: 9

16 May 1984

3040-01-156-5804
Shouldered Shaft

011565804
4G13665-103A: RNCC: 3 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2
4G13665-103A: RNCC: 5 | RNVC: 2

22 Jun 1983

3040-01-442-2356
Rudd Balance Weight

014422356
66-8335-12: RNCC: 3 | RNVC: 2

8 Mar 1997

3040-01-370-5523
Bell Crank

013705523
1534AS205: RNCC: 3 | RNVC: 2
1534AS205: RNCC: 5 | RNVC: 2
1534AS205: RNCC: 5 | RNVC: 2
1534AS205: RNCC: 5 | RNVC: 2
1534AS205: RNCC: 5 | RNVC: 2
1534AS205: RNCC: 5 | RNVC: 2
1534AS205: RNCC: 5 | RNVC: 2
1534AS205: RNCC: 5 | RNVC: 9
10384393: RNCC: 6 | RNVC: 9

24 Jan 1993

3040-00-895-2364
Aile Balance Weight

008952364
65-1091-19: RNCC: 3 | RNVC: 2
65-1091-19: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-039-5767
Aile Balance Weight

010395767
5-87421-2052: RNCC: 3 | RNVC: 2

23 Apr 1977

3040-01-091-3841
Rig Connecting Link

010913841
70400-02252-120: RNCC: 3 | RNVC: 2
SR11719A: RNCC: 3 | RNVC: 9
2005-1: RNCC: 5 | RNVC: 2
1100070-120: RNCC: 5 | RNVC: 9
2005-Y120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
70400-02252-120: RNCC: 5 | RNVC: 9
SR11719A: RNCC: 5 | RNVC: 9

7 Mar 1980

3040-00-965-7391
Linear Actuating Cylinder Assembly

009657391
65D35396-1: RNCC: 1 | RNVC: 2
91200-236: RNCC: 3 | RNVC: 2
65D35396-1: RNCC: 5 | RNVC: 9
65D35396-1: RNCC: 5 | RNVC: 9
65D35396-1: RNCC: 5 | RNVC: 9
65D35396-1: RNCC: 5 | RNVC: 9
65D35396-1 98750: RNCC: 5 | RNVC: 9
65D35396-1: RNCC: 5 | RNVC: 9
3A68E-1: RNCC: 5 | RNVC: 9
3A68E-60: RNCC: 5 | RNVC: 9

1 Jun 1966

3040-00-446-7551
Thrust Bearing Shoe

004467551
W5935773PC95: RNCC: 3 | RNVC: 2
9-2445-5: RNCC: 5 | RNVC: 2
T4973963PC120: RNCC: 5 | RNVC: 2
T5992990PC27: RNCC: 5 | RNVC: 2
W5329773PC72: RNCC: 5 | RNVC: 2
W5329790PC70: RNCC: 5 | RNVC: 2
W5938161PC28: RNCC: 5 | RNVC: 2
W5938162PC70: RNCC: 5 | RNVC: 2
W5938253PC82: RNCC: 5 | RNVC: 2
W5939495PC59: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-714-2636
Shaft Collar Device

017142636
HST1570ZBWT8: RNCC: 3 | RNVC: 2
HST1570: RNCC: D | RNVC: 9

3040-01-719-0082
Rotary Switch

017190082
FX8014: RNCC: 3 | RNVC: 2

3040-00-731-3069
Ammunition Fee Pawl

007313069
7313069: RNCC: 3 | RNVC: 2
A10335: RNCC: 5 | RNVC: 2
201010019: RNCC: 5 | RNVC: 2
3662001682: RNCC: 5 | RNVC: 2
3040PL0911505: RNCC: 6 | RNVC: 9
366-200-1682: RNCC: 6 | RNVC: 9
1005007313069: RNCC: 6 | RNVC: 9
10092523: RNCC: 6 | RNVC: 9
75F6095: RNCC: 8 | RNVC: 2
ARMYDWG7313069: RNCC: C | RNVC: 1

1 Jan 1963

3040-01-195-3663
Ball Joint

011953663
88911387: RNCC: 3 | RNVC: 2
9767112: RNCC: 5 | RNVC: 9
3986009: RNCC: 5 | RNVC: 9
9764615: RNCC: 5 | RNVC: 9
10268: RNCC: 5 | RNVC: 9
9762023: RNCC: 5 | RNVC: 9
339781: RNCC: 5 | RNVC: 9
339781: RNCC: 5 | RNVC: 9
9764615: RNCC: 5 | RNVC: 9
9767112: RNCC: 5 | RNVC: 9

28 Nov 1984

3040-00-061-0799
Hub Clamp

000610799
CG112: RNCC: 3 | RNVC: 2
C75: RNCC: 3 | RNVC: 2
YC15-2S: RNCC: 5 | RNVC: 2
10179123-2: RNCC: 5 | RNVC: 2
P1753-1: RNCC: 5 | RNVC: 2
321794-2: RNCC: 5 | RNVC: 2
10539417: RNCC: 5 | RNVC: 2
7527335P2: RNCC: 5 | RNVC: 9
7527335P0002: RNCC: 5 | RNVC: 9
321794-2: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-563-2659
Lever Bracket

015632659
3964908: RNCC: 3 | RNVC: 2
02/911856: RNCC: 5 | RNVC: 2
3964908: RNCC: 5 | RNVC: 2

7 May 2008

3040-00-364-3307
Shouldered Shaft

003643307
23500714: RNCC: 3 | RNVC: 2
1DD467: RNCC: 5 | RNVC: 2
FP23500714: RNCC: 5 | RNVC: 2
5150322: RNCC: 5 | RNVC: 9
5150322: RNCC: 5 | RNVC: 9
5150322: RNCC: 5 | RNVC: 9
1DD467: RNCC: 5 | RNVC: 9
002080T: RNCC: 5 | RNVC: 9
K23500714: RNCC: 5 | RNVC: 9
5105322: RNCC: 5 | RNVC: 9

1 Jan 1961

3040-01-553-1328
Helical Co Retainer

015531328
544T1: RNCC: 3 | RNVC: 2
RV51-160 ITEM NO.2: RNCC: 5 | RNVC: 2

9 Jul 2007

3040-01-551-1224
St Tubing Connector

015511224
1932-585: RNCC: 3 | RNVC: 2

8 May 2007

3040-01-600-4022
Shouldered Stud

016004022
120-161P26K: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-01-159-3396
Elev Balance Weight

011593396
50-6237-3011: RNCC: 3 | RNVC: 2
50-6237-3011: RNCC: 5 | RNVC: 9

6 Aug 1983

3040-01-284-5375
Straight Shaft

012845375
196B8945-6: RNCC: 3 | RNVC: 2
196B8945-6: RNCC: 5 | RNVC: 2

25 Aug 1988

3040-00-767-3599
Ball Joint

007673599
R-109: RNCC: 3 | RNVC: 2
653867C1: RNCC: 5 | RNVC: 2
D121417: RNCC: 5 | RNVC: 2
AM1924T: RNCC: 5 | RNVC: 2
11657355: RNCC: 5 | RNVC: 2
158397: RNCC: 5 | RNVC: 9
R109: RNCC: 5 | RNVC: 9
653867C1: RNCC: 5 | RNVC: 9
R109RH: RNCC: 5 | RNVC: 9
SPG1004CPA: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-306-3357
Hook Bolt

013063357
10504335: RNCC: 3 | RNVC: 2
3040V0742: RNCC: 5 | RNVC: 2

23 Aug 1989

3040-00-292-2296
Pu Control Assembly

002922296
MA86-72G: RNCC: 3 | RNVC: 2
000-36324-0001: RNCC: 5 | RNVC: 2
A5907-004: RNCC: 5 | RNVC: 2
272603-72: RNCC: 5 | RNVC: 9
AIM-16U06-72: RNCC: 5 | RNVC: 9
A1M-16U06-72: RNCC: 5 | RNVC: 9
A5907-004: RNCC: 5 | RNVC: 9
2177-16U06-72: RNCC: 5 | RNVC: 9
006-16U06-72: RNCC: 5 | RNVC: 9
2177-16U06-72: RNCC: 5 | RNVC: 9

19 Sep 1973

3040-00-632-2332
Control Tube Assemb

006322332
69-9400: RNCC: 3 | RNVC: 2
69-9400: RNCC: 5 | RNVC: 2
69-9400: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-779-4020
Wiper Ring

007794020
051-WP001-300: RNCC: 3 | RNVC: 9
A54-30-3: RNCC: 5 | RNVC: 9

1 Jan 1962

3040-01-600-4018
Shouldered Stud

016004018
120-182P20K: RNCC: 3 | RNVC: 2

27 Nov 2011

3040-00-233-1129
Elev Balance Weight

002331129
50-6237-3049: RNCC: 3 | RNVC: 2
50-6237-3049: RNCC: 5 | RNVC: 2

24 Oct 1970

3040-01-600-4017
Shouldered Stud

016004017
120-194P25L: RNCC: 1 | RNVC: 2
120-194P25L: RNCC: 3 | RNVC: 2
120-194P25L: RNCC: 3 | RNVC: 2
120-194P25L: RNCC: 3 | RNVC: 2
120-182P20L: RNCC: 5 | RNVC: 9

27 Nov 2011

3040-01-600-4024
Shouldered Stud

016004024
120-161P26L: RNCC: 1 | RNVC: 2
120-161P26L: RNCC: 3 | RNVC: 2
120-161P26L: RNCC: 3 | RNVC: 2
120-161P26L: RNCC: 3 | RNVC: 2
120-161P26L: RNCC: 3 | RNVC: 2
120-161P26L: RNCC: 5 | RNVC: 9

27 Nov 2011

3040-01-377-3959
Bell Crank

013773959
1534AS179: RNCC: 3 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 2
1534AS179: RNCC: 5 | RNVC: 9
1534AS179: RNCC: 5 | RNVC: 9
D013406-501: RNCC: 5 | RNVC: 9
1534AS179: RNCC: 5 | RNVC: 9
D013406-501: RNCC: 5 | RNVC: 9

15 Jul 1993

3040-01-203-4222
Lever Bracket

012034222
1801-001: RNCC: 3 | RNVC: 2
1801-001: RNCC: 3 | RNVC: 9

14 Mar 1985

3040-99-403-4380
Veh Propeller Shaft

3040-01-545-4136
Aile Balance Weight

015454136
65-1091-4: RNCC: 3 | RNVC: 2

13 Nov 2006

3040-01-114-4553
Wiper Ring

011144553
CEC401-337-01: RNCC: 3 | RNVC: 2

17 Jun 1981

3040-01-096-5547
Rig Connecting Link

010965547
70400-01250: RNCC: 1 | RNVC: 2
70400-01250-053: RNCC: 3 | RNVC: 2
70400-01250-053: RNCC: 5 | RNVC: 9
70400-01250-053: RNCC: 5 | RNVC: 9
70400-01250-053: RNCC: 5 | RNVC: 9
2018-1: RNCC: 5 | RNVC: 9
70400-01250-053: RNCC: 5 | RNVC: 9
AS4-1030-053: RNCC: 5 | RNVC: 9
1100030-053: RNCC: 5 | RNVC: 9
70400-01250-053: RNCC: 5 | RNVC: 9

24 Jun 1980

3040-01-074-8144
Hydraulic Accumulator Piston

010748144
4687550-0003: RNCC: 3 | RNVC: 2
845-4687550-0003: RNCC: 5 | RNVC: 2
2642-693-03ITEM3: RNCC: 5 | RNVC: 2
4687550-3: RNCC: 5 | RNVC: 2
845-4687550: RNCC: D | RNVC: 9
4687550: RNCC: D | RNVC: 9

7 Apr 1979

3040-00-690-0642
Shouldered Shaft

006900642
415ND6282: RNCC: 3 | RNVC: 9
900171: RNCC: 5 | RNVC: 2
F-8278 PC1X: RNCC: 5 | RNVC: 9
NH7182PC415: RNCC: 5 | RNVC: 9
737120: RNCC: 5 | RNVC: 9
ND6282BPC415: RNCC: 5 | RNVC: 9
415ND6282: RNCC: 5 | RNVC: 9
H-8205PIECE 46: RNCC: 5 | RNVC: 9
ND6282PC415: RNCC: 5 | RNVC: 9
H-8188 PIECE 38: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-233-1106
Elev Balance Weight

002331106
50-6237-3012: RNCC: 3 | RNVC: 2

24 Oct 1970

3040-00-559-5003
Crank Breech R Left

005595003
5595003: RNCC: 3 | RNVC: 2
200820275-01: RNCC: 3 | RNVC: 2
298683PC1: RNCC: 5 | RNVC: 2
323915PC1: RNCC: 5 | RNVC: 2
6395-14-48: RNCC: 5 | RNVC: 2
5595003: RNCC: 5 | RNVC: 2
5595003: RNCC: 5 | RNVC: 2
200820275-01: RNCC: 5 | RNVC: 2
200820275-01: RNCC: 5 | RNVC: 2
200820275-01: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-01-251-8945
Bell Crank

012518945
65-13005-8: RNCC: 3 | RNVC: 2
65-13005-8: RNCC: 5 | RNVC: 2
65-13005-8: RNCC: 5 | RNVC: 2
65-13005-8: RNCC: 5 | RNVC: 2
65-13005-8: RNCC: 5 | RNVC: 2
65-13005-8: RNCC: 5 | RNVC: 2
65-13005-8: RNCC: 5 | RNVC: 2
65-13005-8: RNCC: 5 | RNVC: 2
65-13005-8: RNCC: 5 | RNVC: 2
65-13005-8: RNCC: 5 | RNVC: 2

25 Mar 1987

3040-01-593-9700
Shouldered Shaft

015939700
3930380: RNCC: 3 | RNVC: 2
3930380: RNCC: 5 | RNVC: 9

22 Apr 2011

3040-01-600-9124
Tension Spring Asse

016009124
43019373: RNCC: 3 | RNVC: 2

29 Dec 2011

3040-01-543-4063
Aile Balance Weight

015434063
50-2477-19: RNCC: 3 | RNVC: 2

12 Sep 2006

3040-01-044-3250
Elev Balance Weight

010443250
69-1433-806: RNCC: 3 | RNVC: 2
69-1433-806: RNCC: 5 | RNVC: 2

10 Jul 1977

3040-01-248-1571
Compressor Piston

012481571
MLH53826G1: RNCC: 3 | RNVC: 2
MLH53826G1: RNCC: 3 | RNVC: 9
MLH53826G1: RNCC: 5 | RNVC: 9
MLH53826G1: RNCC: 5 | RNVC: 9
34052522: RNCC: C | RNVC: 1

16 Jan 1987

3040-01-459-0023
Rigid Connecting Link

014590023
167-6926161 PC87: RNCC: 3 | RNVC: 2
LH5167609 PC87: RNCC: 5 | RNVC: 2
167-6926161: RNCC: D | RNVC: 9

17 Sep 1998

3040-01-457-9329
Manu Lever Assembly

014579329
9HR296: RNCC: 3 | RNVC: 2
13230E5450: RNCC: 5 | RNVC: 2
9HR296: RNCC: 5 | RNVC: 9

7 Aug 1998

3040-01-457-3066
Remote Contro Lever

014573066
4W-0687: RNCC: 3 | RNVC: 2
4W-0687: RNCC: 5 | RNVC: 2
4W-0687: RNCC: 5 | RNVC: 2
4P-7028 IT 8: RNCC: 5 | RNVC: 2

18 Jul 1998

3040-01-457-0525
Linear Actuating Cylinder

014570525
128-4119: RNCC: 3 | RNVC: 2
128-4119: RNCC: 5 | RNVC: 9

9 Jul 1998

3040-01-457-0460
Flexible Drive Shaft

014570460
12976082-1: RNCC: 1 | RNVC: 2
12976082-1: RNCC: 3 | RNVC: 2
12976082: RNCC: D | RNVC: 9

9 Jul 1998

3040-01-456-8738
Linear Ac Parts Kit

014568738
RG2HLTS201: RNCC: 3 | RNVC: 2
RG2HTLS201: RNCC: 3 | RNVC: 9
RGHLTS201: RNCC: 5 | RNVC: 9

29 Jun 1998

3040-01-456-0544
Actuating Cylinder

014560544
9383155-1: RNCC: 3 | RNVC: 9
9383166-1: RNCC: 5 | RNVC: 2

28 May 1998

3040-01-455-9891
Shouldered Shaft

014559891
1876-01: RNCC: 3 | RNVC: 2
P2667B-03: RNCC: 5 | RNVC: 9
NAP 929 ITEM 13: RNCC: 5 | RNVC: 9
P2667B-01: RNCC: C | RNVC: 1
P2667B-02: RNCC: C | RNVC: 1
NAP 929: RNCC: D | RNVC: 9

26 May 1998

3040-01-455-2629
Stra Shaft Assembly

014552629
2741164-1-1: RNCC: 3 | RNVC: 2
74-660056-211: RNCC: 5 | RNVC: 9

27 Apr 1998

3040-01-454-5829
Housing Connection

014545829
250-D0057: RNCC: 3 | RNVC: 2
218-C0105: RNCC: 5 | RNVC: 9

6 Apr 1998

3040-01-454-5336
Shouldered Shaft

014545336
006-NGC-011-300: RNCC: 3 | RNVC: 2
99-NGC-0-03 ITEM 11-R: RNCC: 5 | RNVC: 9
006-NGC-0-11-30: RNCC: C | RNVC: 1

3 Apr 1998

3040-01-454-3533
Linear Actuating Cylinder Assembly

014543533
A23280Q9819: RNCC: 3 | RNVC: 2
A2-3280K9449: RNCC: 5 | RNVC: 9

27 Mar 1998

3040-01-454-3531
Linear Actuating Cylinder Assembly

014543531
A1-3280Q9819: RNCC: 3 | RNVC: 2
A1-3280K9449: RNCC: 5 | RNVC: 9

27 Mar 1998

3040-01-454-1937
Shouldered Shaft

014541937
9325C02-1233-01: RNCC: 3 | RNVC: 2
60002361: RNCC: 5 | RNVC: 2
60001007: RNCC: 5 | RNVC: 9
60002381: RNCC: 5 | RNVC: 9

23 Mar 1998

3040-01-453-8753
Straight Shaft

014538753
A4810055: RNCC: 3 | RNVC: 9
A4810055: RNCC: 5 | RNVC: 2
A4810055: RNCC: 5 | RNVC: 9

12 Mar 1998

3040-01-453-8706
Straight Shaft

014538706
A4809149: RNCC: 3 | RNVC: 2
A4809149: RNCC: 5 | RNVC: 2

12 Mar 1998

3040-01-453-8146
Mechanical Actuator

014538146
18356N SIZE 85 WITH HOD 135 BASE: RNCC: 3 | RNVC: 2
18356N GROUP 4: RNCC: 5 | RNVC: 9
22502N PIECE 1: RNCC: 5 | RNVC: 9
21506N PIECE 1: RNCC: C | RNVC: 1

11 Mar 1998

3040-01-453-7807
Rig Connecting Link

014537807
4609-543-G: RNCC: 3 | RNVC: 2
4609-543: RNCC: 5 | RNVC: 2
17B9F1112-543: RNCC: 5 | RNVC: 2

10 Mar 1998

3040-01-452-6913
Retainer Collar

014526913
EJ20006: RNCC: 3 | RNVC: 2
EJ-51117: RNCC: 5 | RNVC: 2
EJ5117B ITEM NO. 13: RNCC: 5 | RNVC: 9

4 Feb 1998

3040-01-452-6193
Rigid Connecting Link

014526193
167-6926161 PC47: RNCC: 3 | RNVC: 2
LH5167609 PC47: RNCC: 5 | RNVC: 2
167-6926161: RNCC: D | RNVC: 9

2 Feb 1998

3040-01-452-5918
Rigid Connecting Link

014525918
167-6926161 PC41: RNCC: 3 | RNVC: 2
LH5167609 PC41: RNCC: 5 | RNVC: 2
167-6926161: RNCC: D | RNVC: 9

30 Jan 1998

3040-01-452-5025
Stra Shaft Assembly

014525025
6181435-1: RNCC: 3 | RNVC: 2
6181435-1: RNCC: 5 | RNVC: 2

28 Jan 1998

3040-01-452-2164
Shouldered Shaft

014522164
H306-240: RNCC: 3 | RNVC: 2
N5691 PC 63: RNCC: 5 | RNVC: 2
N5691: RNCC: D | RNVC: 9

21 Jan 1998

3040-01-452-0650
A Cylinder Assembly

014520650
AG191617B0: RNCC: 3 | RNVC: 2
2.50CC-2HLTVS14C X 3.000: RNCC: 5 | RNVC: 9

14 Jan 1998

3040-01-451-9840
Straight Shaft

014519840
EJ-21281: RNCC: 3 | RNVC: 2
EJ51121 ITEM NO. 9: RNCC: 5 | RNVC: 2
EJ51121: RNCC: D | RNVC: 9

12 Jan 1998

3040-01-451-8937
Rig Connecting Link

014518937
PDA-1-12: RNCC: 3 | RNVC: 2
PDA-1 ITEM 15: RNCC: 5 | RNVC: 2

8 Jan 1998

3040-01-451-6487
A Cylinder Assembly

014516487
52C9105-1: RNCC: 3 | RNVC: 2

23 Dec 1997

3040-01-451-2405
Mechanicall Spindle

014512405
8100-1251-0192 PC 50: RNCC: 3 | RNVC: 2
8100-1251-0192 PC 50: RNCC: 5 | RNVC: 2
8100-1251-0192 PC 50: RNCC: 5 | RNVC: 9
8100-1251-0285 PT NO 15: RNCC: C | RNVC: 1
8100-1251-0192: RNCC: D | RNVC: 9

10 Dec 1997

3040-01-451-2402
Manual Contro Lever

014512402
8100-1251-0192 PC 146: RNCC: 3 | RNVC: 2
8100-1251-0285 PT NO 82: RNCC: C | RNVC: 1
8100-1251-0192: RNCC: D | RNVC: 9

10 Dec 1997

3040-01-450-5117
Mechanical Actuator

014505117
2512804: RNCC: 3 | RNVC: 2
5265533: RNCC: 5 | RNVC: 2

13 Nov 1997

3040-01-450-2030
Differential Spider

014502030
130-4743: RNCC: 3 | RNVC: 2
131-2510 ITEM 12: RNCC: 5 | RNVC: 9
131-2510: RNCC: D | RNVC: 9

30 Oct 1997

3040-01-449-2323
Spur Gearshaft

014492323
1395F06H01: RNCC: 3 | RNVC: 2
1395F01G01 PC 13: RNCC: 5 | RNVC: 2

24 Sep 1997

3040-01-449-1443
Shouldered Shaft

014491443
21196-1004-1: RNCC: 3 | RNVC: 2
21196 FIND 31: RNCC: 5 | RNVC: 9
21196-1004: RNCC: 5 | RNVC: 9
21196: RNCC: D | RNVC: 9

22 Sep 1997

3040-01-447-8040
Shouldered Shaft

014478040
10245-2: RNCC: 3 | RNVC: 2

14 Aug 1997

3040-01-447-6888
Piston Rod Guide

014476888
21196-1007-1: RNCC: 3 | RNVC: 2
21071-1003-1: RNCC: 3 | RNVC: 2
21071-1003: RNCC: 5 | RNVC: 2
21196 FIND 8: RNCC: 5 | RNVC: 9
21196-1007: RNCC: 5 | RNVC: 9
21196: RNCC: D | RNVC: 9

12 Aug 1997

3040-01-447-6110
Shouldered Shaft

014476110
21198-1000-1: RNCC: 3 | RNVC: 2
21198-5: RNCC: 5 | RNVC: 9
21198: RNCC: D | RNVC: 9

11 Aug 1997

3040-01-447-6108
Shouldered Shaft

014476108
21140-1003-1: RNCC: 3 | RNVC: 2
21140-9: RNCC: 5 | RNVC: 9
21140: RNCC: D | RNVC: 9

11 Aug 1997

3040-01-447-3034
Disc Brake Caliper Assembly

014473034
PD143351: RNCC: 3 | RNVC: 2
1103G62-5: RNCC: 5 | RNVC: 9
959E468-003: RNCC: 5 | RNVC: 9
GB9640451: RNCC: 5 | RNVC: 9
PD143351: RNCC: 5 | RNVC: 9
4-61928 REV F: RNCC: 5 | RNVC: 9
PD 1433-5-1: RNCC: 5 | RNVC: 9
PD1433-4: RNCC: 5 | RNVC: 9
9640451: RNCC: C | RNVC: 1

1 Aug 1997

3040-01-447-1823
Counterbalance Weight

014471823
70219-01045-105: RNCC: 3 | RNVC: 2

29 Jul 1997

3040-01-446-9988
Shouldered Shaft

014469988
21140-1002-1: RNCC: 3 | RNVC: 2
21140-8: RNCC: 5 | RNVC: 9
21140: RNCC: D | RNVC: 9

23 Jul 1997

3040-01-446-3790
Shouldered Shaft

014463790
0311-961280: RNCC: 3 | RNVC: 2
AIN/0311 960280: RNCC: 5 | RNVC: 2
AIN/0311 961280: RNCC: 5 | RNVC: 2

1 Jul 1997

3040-01-446-3620
Linear Actuating Cylinder Assembly

014463620
403236: RNCC: 3 | RNVC: 2
1643482: RNCC: 5 | RNVC: 2
CMG/403236: RNCC: 5 | RNVC: 2

1 Jul 1997

3040-01-445-9110
Helical Gearshaft

014459110
12469188: RNCC: 3 | RNVC: 2
12469188: RNCC: 3 | RNVC: 2
2538941: RNCC: 3 | RNVC: 2
RCSK17252: RNCC: 5 | RNVC: 9
RCSK17252: RNCC: 5 | RNVC: 9

17 Jun 1997

3040-01-445-5602
A Cylinder Assembly

014455602
RG-CY-1: RNCC: 3 | RNVC: 2
CY-1: RNCC: 5 | RNVC: 9
RG-CY-1: RNCC: 5 | RNVC: 9
6913712-C: RNCC: 5 | RNVC: 9

5 Jun 1997

3040-01-444-8578
Rig Connecting Link

014448578
901-364-202-101: RNCC: 1 | RNVC: 2
901-364-202-101: RNCC: 3 | RNVC: 2

19 May 1997

3040-01-444-3239
Shouldered Shaft

014443239
901-047-580-107: RNCC: 3 | RNVC: 2

5 May 1997

3040-01-444-2410
Shouldered Shaft

014442410
901-011-464-103: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-444-1997
Shouldered Shaft

014441997
901-011-464-104: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-444-1990
Control Cam

014441990
901-011-316-101: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-444-1988
Control Cam

014441988
901-011-316-102: RNCC: 3 | RNVC: 2

1 May 1997

3040-01-443-6018
Rigid Connecting Link

014436018
5110T29G01: RNCC: 3 | RNVC: 2

14 Apr 1997

3040-01-443-5134
Rig Connecting Link

014435134
4643-675-G: RNCC: 3 | RNVC: 2
4643-675: RNCC: 3 | RNVC: 9
17B9F1112-675: RNCC: 5 | RNVC: 2

11 Apr 1997

3040-01-442-9069
Transm Fluid Cooler

014429069
5-036-10-066-001: RNCC: 3 | RNVC: 2
5-036-10-066-001: RNCC: 5 | RNVC: 9

26 Mar 1997

3040-01-441-9082
Shouldered Shaft

014419082
21346-1003-1: RNCC: 3 | RNVC: 2
21220-8: RNCC: 5 | RNVC: 9
21346-1003: RNCC: 5 | RNVC: 9
21220: RNCC: D | RNVC: 9
21346: RNCC: D | RNVC: 9

26 Feb 1997

3040-01-441-3421
Mechanical Housing

014413421
26012862: RNCC: 3 | RNVC: 2
12479062: RNCC: 3 | RNVC: 2
12479062: RNCC: 5 | RNVC: 2
26012862: RNCC: 5 | RNVC: 9
26060243: RNCC: 5 | RNVC: 9
12479062: RNCC: 5 | RNVC: 9

10 Feb 1997

3040-01-440-6098
Linear Actuating Cylinder

014406098
6623296: RNCC: 3 | RNVC: 2
6623296: RNCC: 5 | RNVC: 9
6615014: RNCC: 5 | RNVC: 9

21 Jan 1997

3040-01-440-5669
Breather

014405669
DC-2: RNCC: 3 | RNVC: 2
92239641: RNCC: 5 | RNVC: 2
738042: RNCC: 5 | RNVC: 2

16 Jan 1997

3040-01-440-4904
A Cylinder Assembly

014404904
2HHFF6CC: RNCC: 3 | RNVC: 2

15 Jan 1997

3040-01-439-7868
Shaft Collar

014397868
8100-1256-0303-PC32: RNCC: 3 | RNVC: 2
8100-1256-0303: RNCC: D | RNVC: 9

19 Dec 1996

3040-01-439-7504
C Wire Brush Holder

014397504
875 17203-001: RNCC: 3 | RNVC: 2
100.932-4: RNCC: 5 | RNVC: 9
414 5895-002: RNCC: 5 | RNVC: 9

18 Dec 1996

3040-01-439-5574
A Cylinder Assembly

014395574
7L-G-1.50-11.50-NC-0.625-1: RNCC: 3 | RNVC: 2
23059167: RNCC: 5 | RNVC: 2
23059068 ITEM 5: RNCC: 5 | RNVC: 9

12 Dec 1996

3040-01-439-5046
Nonrota Eye Bracket

014395046
23051356: RNCC: 3 | RNVC: 2
23059004 ITEM 3: RNCC: 5 | RNVC: 2
23059004 ITEM 3: RNCC: 5 | RNVC: 9
23051356: RNCC: 5 | RNVC: 9
23059004: RNCC: D | RNVC: 9

10 Dec 1996

3040-01-439-0610
Breather

014390610
NBF-2015: RNCC: 3 | RNVC: 2
2D3-05192 ITEM NO. 16: RNCC: 5 | RNVC: 2
2D3-05193 ITEM 6: RNCC: 5 | RNVC: 2

26 Nov 1996

3040-01-439-0182
Shaft Collar

014390182
C37-3250-028-1800: RNCC: 3 | RNVC: 2
NSP-00192 PC 14: RNCC: 5 | RNVC: 2
NSP-00192: RNCC: D | RNVC: 9

25 Nov 1996

3040-01-438-8050
Linear Actuating Cylinder Assembly

014388050
6623297: RNCC: 3 | RNVC: 2
6615023: RNCC: 5 | RNVC: 9
6623297: RNCC: 5 | RNVC: 9

20 Nov 1996

3040-01-438-7795
Pawl

014387795
7115372: RNCC: 3 | RNVC: 2
7115372: RNCC: 5 | RNVC: 9

19 Nov 1996

3040-01-438-6187
Shouldered Shaft Assembly

014386187
3131602: RNCC: 3 | RNVC: 2

13 Nov 1996

3040-01-438-1888
Rigid Connecting Link

014381888
3V-9399: RNCC: 3 | RNVC: 2

1 Nov 1996

3040-01-437-8315
Shaft Collar

014378315
SC3040-0011-1: RNCC: 3 | RNVC: 9
6436K23: RNCC: 5 | RNVC: 2
SC3040-0011: RNCC: 7 | RNVC: 9

24 Oct 1996

3040-01-437-5481
Shouldered Shaft Assembly

014375481
80053-2: RNCC: 3 | RNVC: 2
20003 ITEM NO. 30: RNCC: 5 | RNVC: 2
80053 ASSY 2: RNCC: 5 | RNVC: 2
20003: RNCC: D | RNVC: 9
80053: RNCC: D | RNVC: 9

17 Oct 1996

3040-01-436-9056
Shouldered Shaft

014369056
12364517: RNCC: 3 | RNVC: 2
12364517: RNCC: 5 | RNVC: 2
12364517: RNCC: 5 | RNVC: 2

30 Sep 1996

3040-01-436-8549
A Cylinder Assembly

014368549
1764AS165-1: RNCC: 3 | RNVC: 2
TH6011540SA-01: RNCC: 3 | RNVC: 2
1764AS165-1: RNCC: 3 | RNVC: 9
1764AS165-1: RNCC: 7 | RNVC: 2

30 Sep 1996

3040-01-436-6203
Straight Shaft

014366203
029256-1: RNCC: 3 | RNVC: 2
029256-1: RNCC: 5 | RNVC: 9
029256-1: RNCC: C | RNVC: 1
029256: RNCC: D | RNVC: 9

24 Sep 1996

3040-01-436-5803
Rig Connecting Link

014365803
4609-545: RNCC: 3 | RNVC: 2
17B9F1112-545: RNCC: 5 | RNVC: 2
17B9F1112: RNCC: 7 | RNVC: 1
4609: RNCC: D | RNVC: 9

23 Sep 1996

3040-01-436-4951
Straight Shaft

014364951
93300559-1: RNCC: 3 | RNVC: 2
93300559: RNCC: D | RNVC: 9

20 Sep 1996

3040-01-435-7170
Rig Connecting Link

014357170
92-AV101-N-SYM-53A: RNCC: 3 | RNVC: 2
92-AV101-N: RNCC: D | RNVC: 9

30 Aug 1996

3040-01-435-6207
Shouldered Shaft

014356207
211036217: RNCC: 3 | RNVC: 2
211036217: RNCC: 3 | RNVC: 2
801-6405530 FIND 1: RNCC: 5 | RNVC: 2
801-6405530-1: RNCC: 5 | RNVC: 2
6405530: RNCC: D | RNVC: 9

29 Aug 1996

3040-01-435-0360
Mechanical Drive Housing

014350360
5-57244-3: RNCC: 3 | RNVC: 2

12 Aug 1996

3040-01-434-7407
A Cylinder Assembly

014347407
2037392: RNCC: 3 | RNVC: 2
2037392: RNCC: 5 | RNVC: 9
2014712: RNCC: 5 | RNVC: 9

6 Aug 1996

3040-01-434-2406
Manual Control Lever

014342406
306E64F2: RNCC: 3 | RNVC: 2

24 Jul 1996

3040-01-434-0927
A Cylinder Assembly

014340927
X-600: RNCC: 3 | RNVC: 2

19 Jul 1996

3040-01-432-8239
Rig Connecting Link

014328239
7-311511130-15: RNCC: 3 | RNVC: 2
7-311511130-15: RNCC: 3 | RNVC: 9
7-311511130: RNCC: E | RNVC: 8

14 Jun 1996

3040-01-430-4130
Shouldered Shaft

014304130
12543756: RNCC: 3 | RNVC: 2
715530: RNCC: 5 | RNVC: 2
DAX16227: RNCC: 5 | RNVC: 2

29 Apr 1996

3040-01-430-2615
Brake Shoe

014302615
M615: RNCC: 3 | RNVC: 2
92-AV101-N-SYM-108: RNCC: 5 | RNVC: 2
92-AV101-N: RNCC: D | RNVC: 9

25 Apr 1996

3040-01-429-8360
Hub Clamp

014298360
SPH-76-SS: RNCC: 3 | RNVC: 2
6894422: RNCC: 5 | RNVC: 1
6894422 ITEM 28: RNCC: 5 | RNVC: 2
5363388: RNCC: 5 | RNVC: 2
SP76SS: RNCC: 5 | RNVC: 9

19 Apr 1996

3040-01-429-0813
Shouldered Axle

014290813
4P-3538: RNCC: 3 | RNVC: 2

4 Apr 1996

3040-01-428-9704
Mechanical Actuator

014289704
22002-6: RNCC: 3 | RNVC: 2
22002-6: RNCC: 5 | RNVC: 2

4 Apr 1996

3040-01-428-7181
Cylinder Support

014287181
3141AS298-1: RNCC: 3 | RNVC: 9

1 Apr 1996

3040-01-428-2247
Brake Backing Plate

014282247
LOC155078: RNCC: 3 | RNVC: 2
EX155078: RNCC: 3 | RNVC: 2
EX155078: RNCC: 5 | RNVC: 9

22 Mar 1996

3040-01-428-2246
Brake Backing Plate

014282246
LOC155079: RNCC: 3 | RNVC: 2
EX155079: RNCC: 5 | RNVC: 9
EX155079: RNCC: 5 | RNVC: 9

22 Mar 1996

3040-01-424-1472
Linear Ac Parts Kit

014241472
904843: RNCC: 3 | RNVC: 2
D-1455 MK REF: RNCC: 5 | RNVC: 2

22 Jan 1996

3040-01-424-0785
Rig Connecting Link

014240785
3168617-1: RNCC: 3 | RNVC: 2
3168617-1: RNCC: 5 | RNVC: 9
3168617-1: RNCC: 5 | RNVC: 9
3168617-1: RNCC: 5 | RNVC: 9
10107298: RNCC: 6 | RNVC: 9

19 Jan 1996

3040-01-423-7802
Nonrota Eye Bracket

014237802
WCC442 RIGHT: RNCC: 3 | RNVC: 2
2-4005-C FIND NO. 15: RNCC: 5 | RNVC: 2
2-4005-A FIND NO. 15: RNCC: 5 | RNVC: 2
2-4005-B FIND NO. 15: RNCC: 5 | RNVC: 2
2-4312-9 FIND NO 13: RNCC: C | RNVC: 1
WCC442: RNCC: D | RNVC: 9
2-4005-A: RNCC: D | RNVC: 9
2-4005-B: RNCC: D | RNVC: 9

10 Jan 1996

3040-01-423-4358
Shouldered Shaft

014234358
74031-46: RNCC: 3 | RNVC: 2
404-602NM ITEM NO. 9: RNCC: 5 | RNVC: 2
404-602NM: RNCC: D | RNVC: 9

27 Dec 1995

3040-01-422-7128
Shouldered Shaft

014227128
28222: RNCC: 3 | RNVC: 2
28222: RNCC: 3 | RNVC: 9

6 Dec 1995

3040-01-422-7124
Straight Shaft

014227124
28234: RNCC: 3 | RNVC: 9
28234: RNCC: 5 | RNVC: 2
28234: RNCC: 5 | RNVC: 2

6 Dec 1995

3040-01-422-5931
Shouldered Shaft

014225931
408Z0019J026Z: RNCC: 3 | RNVC: 2
PL-D4680 PIECE 88: RNCC: 5 | RNVC: 9

5 Dec 1995

3040-01-422-2833
Shouldered Shaft

014222833
21234-1012-1: RNCC: 3 | RNVC: 2
21234 FIND 11: RNCC: 5 | RNVC: 9
21234: RNCC: D | RNVC: 9

28 Nov 1995

3040-01-420-8632
Manual Contro Lever

014208632
D1VLB8NN72X4397: RNCC: 3 | RNVC: 2
DIVLB8NX4397: RNCC: 5 | RNVC: 9

26 Oct 1995

3040-01-420-8447
Thrust Bearing Shoe

014208447
11.12-1007-1: RNCC: 3 | RNVC: 2
11.12-5385-1: RNCC: 5 | RNVC: 2
471007-1: RNCC: 5 | RNVC: 2

26 Oct 1995

3040-01-420-2511
Shaft Collar

014202511
064-48000C000: RNCC: 3 | RNVC: 2
364-47668-000-169: RNCC: 5 | RNVC: 2

12 Oct 1995

3040-01-420-1942
Shouldered Shaft

014201942
21141-1001-1: RNCC: 3 | RNVC: 2
21141 FIND 9: RNCC: 5 | RNVC: 9
21141: RNCC: D | RNVC: 9

11 Oct 1995

3040-01-420-1195
Rig Connecting Link

014201195
25039-1025-1: RNCC: 3 | RNVC: 2
25039-35: RNCC: 5 | RNVC: 9
25039: RNCC: D | RNVC: 9

6 Oct 1995

3040-01-420-1192
Rig Connecting Link

014201192
25039-1005-1: RNCC: 3 | RNVC: 2
25039-10: RNCC: 5 | RNVC: 9
25039: RNCC: D | RNVC: 9

6 Oct 1995

3040-01-420-1191
Rig Connecting Link

014201191
25039-1021-1: RNCC: 3 | RNVC: 2
25039-34: RNCC: 5 | RNVC: 9
25039: RNCC: D | RNVC: 9

6 Oct 1995

3040-01-420-1190
Rig Connecting Link

014201190
25039-1004-1: RNCC: 3 | RNVC: 2
25039-9: RNCC: 5 | RNVC: 9
25039: RNCC: D | RNVC: 9

6 Oct 1995

3040-01-419-7104
Shouldered Shaft

014197104
20660-1003-1: RNCC: 3 | RNVC: 2
21213-12: RNCC: 5 | RNVC: 9
20660-1003: RNCC: D | RNVC: 9

28 Sep 1995

3040-01-419-7097
Nonrotating Shaft Eye Bracket

014197097
12366200: RNCC: 3 | RNVC: 2
12366200: RNCC: 5 | RNVC: 2
12366200: RNCC: 5 | RNVC: 2

28 Sep 1995

3040-01-419-6368
Flexibl Drive Shaft

014196368
7575404-002: RNCC: 3 | RNVC: 2
757404-2: RNCC: 5 | RNVC: 2
7575404-2: RNCC: 5 | RNVC: 9
7575404: RNCC: D | RNVC: 9

27 Sep 1995

3040-01-419-4687
Remote Control Lever

014194687
12365627: RNCC: 3 | RNVC: 2
12365627: RNCC: 5 | RNVC: 2
12365627: RNCC: 5 | RNVC: 9
12365627: RNCC: D | RNVC: 9

22 Sep 1995

3040-01-419-3616
Piston Rod Ring

014193616
064-47720-000: RNCC: 3 | RNVC: 2
364-47668-000-55: RNCC: 5 | RNVC: 2
064-47720C000: RNCC: 5 | RNVC: 9

20 Sep 1995

3040-01-419-1656
Linear A Piston Rod

014191656
3253531-1: RNCC: 3 | RNVC: 2
3253531-1: RNCC: 5 | RNVC: 2
3798326 FIND 8: RNCC: 5 | RNVC: 2
3798326: RNCC: D | RNVC: 9

14 Sep 1995

3040-01-418-9500
Rig Connecting Link

014189500
4668655: RNCC: 3 | RNVC: 9
4668655: RNCC: 5 | RNVC: 2
4668655: RNCC: C | RNVC: 1

8 Sep 1995

3040-01-418-6588
Control Cam

014186588
16L322-10: RNCC: 3 | RNVC: 2
16L322-10: RNCC: 8 | RNVC: 2

31 Aug 1995

3040-01-418-4066
Shouldered Shaft

014184066
12366654: RNCC: 3 | RNVC: 2
B713H: RNCC: 5 | RNVC: 9

25 Aug 1995

3040-01-418-3407
Shouldered Shaft

014183407
21126-21: RNCC: 3 | RNVC: 9
21126-1001-1: RNCC: 5 | RNVC: 2
21126: RNCC: D | RNVC: 9

24 Aug 1995

3040-01-418-2996
Clutch Shaft

014182996
12524545: RNCC: 3 | RNVC: 2
12524545: RNCC: 3 | RNVC: 9
12524545: RNCC: 5 | RNVC: 2
465-4545: RNCC: 5 | RNVC: 2
12524545: RNCC: 5 | RNVC: 9
465-4545: RNCC: 5 | RNVC: 9
10126897: RNCC: 6 | RNVC: 9

24 Aug 1995

3040-01-418-2108
Inertia Damper

014182108
21072-801-1: RNCC: 3 | RNVC: 2
21070 FIND NO. 8: RNCC: 5 | RNVC: 9
21070-8: RNCC: 5 | RNVC: 9
21070: RNCC: D | RNVC: 9

22 Aug 1995

3040-01-417-9409
Shouldered Shaft

014179409
21199-1000-1: RNCC: 3 | RNVC: 2
21199-5: RNCC: 5 | RNVC: 9
21199-1000: RNCC: D | RNVC: 9

17 Aug 1995

3040-01-417-6191
Linear Actuating Cylinder Assembly

014176191
58497: RNCC: 3 | RNVC: 2
NN17680A: RNCC: 3 | RNVC: 2
12420793: RNCC: 5 | RNVC: 9
12420793: RNCC: 5 | RNVC: 9
12420793: RNCC: 7 | RNVC: 2

10 Aug 1995

3040-01-417-2726
Rig Connecting Link

014172726
SW33962: RNCC: 3 | RNVC: 2
SW33437: RNCC: 5 | RNVC: 9

3 Aug 1995

3040-01-417-2330
Control Cam

014172330
07209001128: RNCC: 3 | RNVC: 2
SW142-16: RNCC: 5 | RNVC: 2
B07209.001.128: RNCC: 5 | RNVC: 9
B07209.001.128: RNCC: 5 | RNVC: 9
SW142-16: RNCC: 5 | RNVC: 9
MP8353 FIND NO: RNCC: C | RNVC: 1
SW144 FIND 25: RNCC: C | RNVC: 1
SW122 FIND 25: RNCC: C | RNVC: 1
SW142: RNCC: D | RNVC: 9

3 Aug 1995

3040-01-416-0632
Sha Retaining Plate

014160632
12364681: RNCC: 3 | RNVC: 2
12364681: RNCC: 5 | RNVC: 2
12364681: RNCC: 5 | RNVC: 9

12 Jul 1995

3040-01-415-9465
Shouldered Shaft Assembly

014159465
318F1894D2: RNCC: 3 | RNVC: 2

10 Jul 1995

3040-01-415-7404
Linear Actuatin Cap

014157404
002-9223-969: RNCC: 3 | RNVC: 2
1Q8901-0010-01A ITEM 2: RNCC: 5 | RNVC: 2
1Q8901-0010-01A: RNCC: D | RNVC: 9

5 Jul 1995

3040-01-415-6640
Mechanical Actuator

014156640
B-800-22002-11: RNCC: 3 | RNVC: 2
22002-11: RNCC: 5 | RNVC: 2
22002-11: RNCC: 5 | RNVC: 2

30 Jun 1995

3040-01-415-4332
Straight Shaft

014154332
12366652: RNCC: 3 | RNVC: 2
B713F: RNCC: 5 | RNVC: 9

27 Jun 1995

3040-00-162-5186
Manual Contro Lever

001625186
A7556-001-259: RNCC: 3 | RNVC: 1
8721REVFPC19: RNCC: 5 | RNVC: 1
A7556.001.147: RNCC: 5 | RNVC: 2
9636PC19: RNCC: 5 | RNVC: 2
20277PC31: RNCC: 5 | RNVC: 2
20278PC31: RNCC: 5 | RNVC: 2
07556001259: RNCC: 5 | RNVC: 2
20235PC33: RNCC: 5 | RNVC: 9
20275PC31: RNCC: 5 | RNVC: 9
9636PC19: RNCC: 5 | RNVC: 9

5 Nov 1971

3040-01-030-4435
Rig Connecting Link

010304435
60-7208: RNCC: 3 | RNVC: 2
60-7208: RNCC: 5 | RNVC: 2
60-7208: RNCC: 5 | RNVC: 2
60-7208: RNCC: 5 | RNVC: 2
60-7208: RNCC: 5 | RNVC: 2
60-7208: RNCC: 5 | RNVC: 2
60-7208: RNCC: 5 | RNVC: 2
60-7208: RNCC: 5 | RNVC: 2
60-7208: RNCC: 5 | RNVC: 2
60-7208: RNCC: 5 | RNVC: 2

5 Nov 1976

3040-00-359-4445
Shouldered Shaft

003594445
8486316: RNCC: 3 | RNVC: 2
8486316: RNCC: 3 | RNVC: 2
7D116644: RNCC: 5 | RNVC: 2
116-209: RNCC: 5 | RNVC: 2
TL7623: RNCC: 5 | RNVC: 2
116644: RNCC: 5 | RNVC: 2
16T209: RNCC: 5 | RNVC: 9
9045734: RNCC: 5 | RNVC: 9
116644: RNCC: 5 | RNVC: 9
503093: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-135-3053
Aile Balance Weight

011353053
65-2312-6: RNCC: 3 | RNVC: 2

21 Jul 1982

3040-01-135-3056
Aile Balance Weight

011353056
50-2477-20: RNCC: 3 | RNVC: 2

21 Jul 1982

3040-00-965-7394
A Cylinder Assembly

009657394
65C35397-3: RNCC: 1 | RNVC: 2
3A18D4: RNCC: 3 | RNVC: 9
91200-243: RNCC: 5 | RNVC: 2
65C35397-3: RNCC: 5 | RNVC: 9
91200-243: RNCC: 5 | RNVC: 9
2614256-2: RNCC: 5 | RNVC: 9
3A18D4: RNCC: 5 | RNVC: 9
000993-269: RNCC: 5 | RNVC: 9
65C35397-3: RNCC: 5 | RNVC: 9
3040PL0893350: RNCC: 6 | RNVC: 9

1 Jun 1966

3040-01-033-8038
Bell Crank

010338038
65-38934-501: RNCC: 3 | RNVC: 2
65-38934-1: RNCC: 5 | RNVC: 2

10 Jan 1977

3040-00-756-1070
Hub Clamp

007561070
L1-3: RNCC: 3 | RNVC: 2
10392450-1: RNCC: 3 | RNVC: 2
C85: RNCC: 3 | RNVC: 2
SMB209513-3: RNCC: 5 | RNVC: 2
NGX14760-3: RNCC: 5 | RNVC: 2
342B17232-1: RNCC: 5 | RNVC: 9
SM-A-948058-8: RNCC: 7 | RNVC: 2
CG3-32: RNCC: C | RNVC: 1
L1-3: RNCC: C | RNVC: 1
L1-3: RNCC: C | RNVC: 1

1 Jan 1960

3040-00-768-1853
Worm Shaft

007681853
737121: RNCC: 3 | RNVC: 2
737121: RNCC: 3 | RNVC: 9
NH6714PC415: RNCC: 5 | RNVC: 9
NF6095PC415: RNCC: 5 | RNVC: 9
NH7407PC415: RNCC: 5 | RNVC: 9
NH6357PC415: RNCC: 5 | RNVC: 9
737121: RNCC: 5 | RNVC: 9
F3179389REVDPC415: RNCC: 5 | RNVC: 9
737121: RNCC: 5 | RNVC: 9
NH6688PC415: RNCC: 5 | RNVC: 9

1 Jan 1962

NSN 3040-00-040-2401 000402401 LEVER,MANUAL CONTRO

3040-00-040-2401
Manual Contro Lever

000402401
01166202: RNCC: 3 | RNVC: 2
0F9-01003400: RNCC: 5 | RNVC: 2
33-103538R91: RNCC: 5 | RNVC: 2
802-646-15: RNCC: 5 | RNVC: 2
8365663: RNCC: 5 | RNVC: 2
115086H1: RNCC: 5 | RNVC: 9
1500C4-180K2: RNCC: 5 | RNVC: 9
01003400: RNCC: 5 | RNVC: 9
15001H: RNCC: 5 | RNVC: 9
1500IH: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-102-7147
Flexibl Drive Shaft

011027147
FA GEN 13AX1: RNCC: 3 | RNVC: 2
312-16202X: RNCC: 5 | RNVC: 9
3XR2306: RNCC: 5 | RNVC: 9
A-200-4050: RNCC: 5 | RNVC: 9
3XR23: RNCC: 5 | RNVC: 9
312-16202X: RNCC: 5 | RNVC: 9
3XR23: RNCC: 5 | RNVC: 9
3XR2306: RNCC: 5 | RNVC: 9
12273191: RNCC: 5 | RNVC: 9
3040011027147: RNCC: 6 | RNVC: 9

25 Oct 1980

3040-01-151-3755
Straight Shaft

011513755
006-7100030-302: RNCC: 3 | RNVC: 2
L-2184: RNCC: 5 | RNVC: 2
55-22015-15: RNCC: 5 | RNVC: 2
728-0030-237: RNCC: 5 | RNVC: 2
KMC-286-0337-000 PC.6: RNCC: 5 | RNVC: 2
RAC-5MMX50N: RNCC: 5 | RNVC: 2
722-0150-000 PIECE 4: RNCC: 5 | RNVC: 9
722-0150-000 PIECE 4: RNCC: 5 | RNVC: 9
728-0030-237: RNCC: 5 | RNVC: 9
728-0030-237: RNCC: 5 | RNVC: 9

16 Apr 1983

3040-01-281-9884
Aile Balance Weight

012819884
90-5044-1: RNCC: 3 | RNVC: 2

6 Jul 1988

3040-00-469-1100
Brake Band And Lining

004691100
AC2103-1: RNCC: 3 | RNVC: 2
AC2103-1: RNCC: 3 | RNVC: 9
3N170PC64: RNCC: 5 | RNVC: 9
59-13: RNCC: 5 | RNVC: 9
3N135PC64: RNCC: 5 | RNVC: 9
1761: RNCC: 5 | RNVC: 9
3N76PC59: RNCC: 5 | RNVC: 9
59-4: RNCC: 5 | RNVC: 9
NN76PC59: RNCC: 5 | RNVC: 9
3N177PC64: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-00-036-3082
Thrust Bearing Shoe

000363082
43-8-2511-3: RNCC: 3 | RNVC: 2
N6021PC919: RNCC: 3 | RNVC: 2
462511BPC3T05: RNCC: 5 | RNVC: 2
462511CPC3T05: RNCC: 5 | RNVC: 2
462511MPC3T05: RNCC: 5 | RNVC: 2
N6040PC919: RNCC: 5 | RNVC: 2
463722PC4T06: RNCC: 5 | RNVC: 2
464083PC1T03: RNCC: 5 | RNVC: 2
H3113288PC919: RNCC: 5 | RNVC: 2
D010-223: RNCC: 5 | RNVC: 2

1 Jan 1963

3040-00-371-5584
Ball Joint

003715584
7372734: RNCC: 3 | RNVC: 2
7418397: RNCC: 3 | RNVC: 2
150-0638: RNCC: 3 | RNVC: 2
1111691: RNCC: 3 | RNVC: 2
08525ABI: RNCC: 5 | RNVC: 2
3H1902J2: RNCC: 5 | RNVC: 2
S12414: RNCC: 5 | RNVC: 2
191474: RNCC: 5 | RNVC: 2
527641: RNCC: 5 | RNVC: 2
109415: RNCC: 5 | RNVC: 2

1 Jan 1961

NSN 3040-00-363-8052 003638052 BRACKET,EYE,ROTATIN

3040-00-363-8052
Rotatin Eye Bracket

003638052
5103903: RNCC: 3 | RNVC: 2
FP5103903: RNCC: 3 | RNVC: 2
5103903: RNCC: 5 | RNVC: 1
6207389: RNCC: 5 | RNVC: 2
2AE53: RNCC: 5 | RNVC: 2
5150324: RNCC: 5 | RNVC: 9
5150324: RNCC: 5 | RNVC: 9
2AE53: RNCC: 5 | RNVC: 9
PC5103903: RNCC: 5 | RNVC: 9
2815003638052: RNCC: 5 | RNVC: 9

1 Jan 1963

3040-01-414-0374
Shou Shaft Assembly

014140374
15261010-111: RNCC: 3 | RNVC: 9
15261004 FIND NO 33: RNCC: 5 | RNVC: 9
15261004: RNCC: D | RNVC: 9
15261010: RNCC: D | RNVC: 9

30 May 1995

3040-01-556-6259
Nonaircraft Mechanical Actuator

015566259
3613734C1: RNCC: 3 | RNVC: 2

3 Oct 2007

3040-01-543-4080
Aile Balance Weight

015434080
50-2477-21: RNCC: 3 | RNVC: 2

12 Sep 2006

3040-00-460-2512
Wiper Ring

004602512
E104459PC32: RNCC: 3 | RNVC: 2
E104459PC32: RNCC: 5 | RNVC: 9

14 Jan 1970

3040-00-756-1770
Hub Clamp

007561770
L1-5: RNCC: 3 | RNVC: 2
711699-012: RNCC: 5 | RNVC: 2
NGX14760-5: RNCC: 5 | RNVC: 2
409708-3: RNCC: 5 | RNVC: 2
CG72: RNCC: 5 | RNVC: 2
7423227P5: RNCC: 5 | RNVC: 2
SMB617463-2: RNCC: 5 | RNVC: 2
711699-12: RNCC: 5 | RNVC: 2
9195487: RNCC: 5 | RNVC: 2
9950824: RNCC: 5 | RNVC: 2

1 Jan 1962

3040-01-182-7252
Actuating Cylinder

011827252
743563-1: RNCC: 3 | RNVC: 2
743563-1: RNCC: 5 | RNVC: 2
743563-1: RNCC: 5 | RNVC: 9

27 Jun 1984

3040-01-270-7917
Lever Bracket

012707917
12340958: RNCC: 3 | RNVC: 2
12340958: RNCC: 3 | RNVC: 2
5592012: RNCC: 5 | RNVC: 9
5592012-B: RNCC: D | RNVC: 9

13 Jan 1988

3040-01-562-6359
Steering Parts Kit

015626359
E75750216: RNCC: 3 | RNVC: 2
SA75750216: RNCC: 5 | RNVC: 9
E75750216: RNCC: 5 | RNVC: 9
SA75750216: RNCC: 5 | RNVC: 9

15 Apr 2008

3040-01-556-4187
Headle Straight Pin

015564187
4286869: RNCC: 3 | RNVC: 2
4286869: RNCC: 5 | RNVC: 2

2 Oct 2007

3040-01-129-1949
Rig Connecting Link

011291949
1534AS412: RNCC: 3 | RNVC: 2
1534AS412: RNCC: 5 | RNVC: 2
1534AS412: RNCC: 5 | RNVC: 2
1534AS412: RNCC: 5 | RNVC: 2
1534AS412: RNCC: 5 | RNVC: 2
C013428-1: RNCC: 5 | RNVC: 9
1534AS412: RNCC: 5 | RNVC: 9
C013428-1: RNCC: 5 | RNVC: 9
C013428-1: RNCC: 5 | RNVC: 9
C013428-1: RNCC: 5 | RNVC: 9

1 Apr 1982

3040-01-524-2538
Vehicular Parts Kit

015242538
DQ6013: RNCC: 3 | RNVC: 2

27 Sep 2004

3040-01-497-5183
Metallic Pipe

014975183
D101790-11: RNCC: 3 | RNVC: 9
D101790-00 ITEM 14: RNCC: D | RNVC: 9

22 May 2002

3040-01-413-7712
Mechanical Housing

014137712
7T3279: RNCC: 3 | RNVC: 2

22 May 1995

NSN 3040-01-413-5999 014135999 BALL JOINT

3040-01-413-5999
Ball Joint

014135999
39006: RNCC: 3 | RNVC: 2
RCSK14735: RNCC: 5 | RNVC: 2
RCSK14735: RNCC: 5 | RNVC: 2

17 May 1995

3040-01-412-9610
Flex Shaft Assembly

014129610
B-416-8897-102X20FT: RNCC: 3 | RNVC: 2
8897-102X20FT: RNCC: 3 | RNVC: 2
500-6574890 FIND NO.69 20FT: RNCC: 5 | RNVC: 2
8897 ASSY B-416-8897-102X20FT: RNCC: 5 | RNVC: 2

3 May 1995

3040-01-412-9609
Flex Shaft Assembly

014129609
B-416-8897-103X15FT: RNCC: 3 | RNVC: 2
8897-103X15FT: RNCC: 3 | RNVC: 2
500-6574890 FIND NO.70 15FT: RNCC: 5 | RNVC: 2
8897 ASSY B-416-8897-103X15FT: RNCC: 5 | RNVC: 2

3 May 1995

3040-01-412-9588
Shouldered Shaft

014129588
36-155-053: RNCC: 3 | RNVC: 2
1023-02-D P 4: RNCC: 5 | RNVC: 2
1023-02-D: RNCC: D | RNVC: 9

3 May 1995

3040-01-412-6839
Linear Actuati Head

014126839
001-9223-968: RNCC: 3 | RNVC: 2
1Q8901-0010-01A ITEM 1: RNCC: 5 | RNVC: 9
1Q8901-0010-01A: RNCC: D | RNVC: 9

26 Apr 1995

3040-01-412-6825
Friction Lining

014126825
566841500: RNCC: 3 | RNVC: 2
N-1190-A PC NO 13: RNCC: 3 | RNVC: 9
5668411500: RNCC: 5 | RNVC: 9
8-004-105-00: RNCC: 5 | RNVC: 9
N-1190-A: RNCC: D | RNVC: 9

26 Apr 1995

3040-01-412-2701
Piston Rod Guide

014122701
21105-1012-1: RNCC: 3 | RNVC: 2
21103 FIND 23: RNCC: 5 | RNVC: 9
21105 FIND 47: RNCC: 5 | RNVC: 9
21105-47: RNCC: 5 | RNVC: 9
21837 FIND 29: RNCC: C | RNVC: 1
21103-23: RNCC: C | RNVC: 1
21105: RNCC: D | RNVC: 9

14 Apr 1995

3040-01-412-2665
Straight Shaft

014122665
12364817: RNCC: 3 | RNVC: 2
12364817: RNCC: 5 | RNVC: 2

14 Apr 1995

3040-01-412-2660
Straight Shaft

014122660
12364818: RNCC: 3 | RNVC: 2
12364818: RNCC: 5 | RNVC: 2

14 Apr 1995

3040-01-411-8480
Shouldered Shaft

014118480
12365639: RNCC: 3 | RNVC: 2
12365639: RNCC: 5 | RNVC: 2
12365639: RNCC: 5 | RNVC: 2

3 Apr 1995

3040-01-411-6249
Housing Adapter

014116249
R1223-20SH12C141A: RNCC: 3 | RNVC: 2
R1223-20: RNCC: 5 | RNVC: 9
PL-999F0815-20: RNCC: 5 | RNVC: 9
999F0815: RNCC: D | RNVC: 9
998F3429: RNCC: D | RNVC: 9

28 Mar 1995

3040-01-411-5714
Shouldered Shaft

014115714
3041053: RNCC: 3 | RNVC: 2

28 Mar 1995

3040-01-411-4886
A Cylinder Assembly

014114886
AG172707BB: RNCC: 3 | RNVC: 2
8.00 CBB-2ATVS14AC X 8.500: RNCC: 5 | RNVC: 9

25 Mar 1995

3040-01-411-2143
Rigid Connecting Link

014112143
12365743: RNCC: 3 | RNVC: 2
12365743: RNCC: 5 | RNVC: 2
12365743: RNCC: 5 | RNVC: 2

20 Mar 1995

3040-01-411-0675
Rigid Connecting Link

014110675
12365428: RNCC: 3 | RNVC: 2
12365428: RNCC: 5 | RNVC: 2
12365428: RNCC: 5 | RNVC: 2

16 Mar 1995

3040-01-411-0672
Rig Connecting Link

014110672
12365763: RNCC: 3 | RNVC: 2
12365763: RNCC: 5 | RNVC: 2
12365763: RNCC: 5 | RNVC: 2

16 Mar 1995

3040-01-410-9965
Remote Control Lever Assembly

014109965
12447182: RNCC: 1 | RNVC: 2
12447182: RNCC: 3 | RNVC: 2
6003172: RNCC: 5 | RNVC: 9
52826: RNCC: 5 | RNVC: 9
000-52826-0001: RNCC: 5 | RNVC: 9
52826-1: RNCC: 5 | RNVC: 9
3040PL1944671: RNCC: 6 | RNVC: 9

16 Mar 1995

3040-01-410-9204
Rig Connecting Link

014109204
L3400104-009: RNCC: 3 | RNVC: 2

15 Mar 1995

3040-01-410-8113
Shouldered Shaft

014108113
12364672: RNCC: 3 | RNVC: 2
12364672: RNCC: 3 | RNVC: 2
12364672: RNCC: 5 | RNVC: 2

12 Mar 1995

3040-01-408-5698
Hub Clamp

014085698
RE40048: RNCC: 3 | RNVC: 2
RE40048: RNCC: 5 | RNVC: 2
RE40048: RNCC: 5 | RNVC: 2
RE40048: RNCC: 5 | RNVC: 9
RE40048: RNCC: 5 | RNVC: 9

21 Feb 1995

3040-01-408-1504
Linear Actuating Cylinder Asse Parts Kit

014081504
9-752-100810: RNCC: 3 | RNVC: 2
9-752-100810: RNCC: 5 | RNVC: 2
9-752-100810: RNCC: 5 | RNVC: 2

10 Feb 1995

3040-01-408-1025
Manual Control Lever

014081025
75192-01A: RNCC: 3 | RNVC: 2
75192-01A: RNCC: 5 | RNVC: 2
75192-01A: RNCC: 5 | RNVC: 2
2HS283: RNCC: C | RNVC: 1

10 Feb 1995

3040-01-408-1012
Housing Adapter

014081012
29513126: RNCC: 3 | RNVC: 2
29513126: RNCC: 5 | RNVC: 2
29513126: RNCC: 5 | RNVC: 2

10 Feb 1995

3040-01-406-7759
Remote Control Lever

014067759
70302-02147-042: RNCC: 3 | RNVC: 2
3040PL1938563: RNCC: 6 | RNVC: 9

12 Jan 1995

3040-01-400-6065
Piston Rod Guide

014006065
21128-1002-1: RNCC: 3 | RNVC: 2
21128-7: RNCC: 5 | RNVC: 9
21128-1002: RNCC: 5 | RNVC: 9
21128: RNCC: D | RNVC: 9

16 Dec 1994

3040-01-400-6064
Mechanical Housing

014006064
1979898: RNCC: 3 | RNVC: 2
1979898: RNCC: 5 | RNVC: 9

16 Dec 1994

3040-01-399-5702
Shouldered Shaft

013995702
36-155-051: RNCC: 3 | RNVC: 2
1020-02-D P 4: RNCC: 5 | RNVC: 2
1021-02-D P 4: RNCC: 5 | RNVC: 2

30 Nov 1994

3040-01-399-5695
Shouldered Shaft

013995695
36-155-052: RNCC: 3 | RNVC: 2
1022-02-D P 4: RNCC: 5 | RNVC: 2

30 Nov 1994

3040-01-399-1016
Straight Shaft

013991016
92-AV101-N-SYM-104: RNCC: 3 | RNVC: 2
92-AV101-N SHT 13 ITEM 104: RNCC: 5 | RNVC: 9
M611-SYM-65: RNCC: 5 | RNVC: 9

16 Nov 1994

3040-01-398-5575
Flexible Sha Casing

013985575
8407-301: RNCC: 3 | RNVC: 2
B409-8407-301: RNCC: 5 | RNVC: 9

5 Nov 1994

3040-01-398-5574
Flexible Shaft Core

013985574
8407-201: RNCC: 3 | RNVC: 2
B409-8407-201: RNCC: 5 | RNVC: 9

5 Nov 1994

3040-01-397-8795
Shaft Collar

013978795
2300227-3: RNCC: 3 | RNVC: 2
3040013978795: RNCC: 6 | RNVC: 9

21 Oct 1994

3040-01-397-2336
Shouldered Shaft

013972336
40095-1: RNCC: 3 | RNVC: 2
40076 ITEM NO. 2: RNCC: 5 | RNVC: 2
40095 ASSY 1: RNCC: 5 | RNVC: 2
40095: RNCC: D | RNVC: 9
40076: RNCC: D | RNVC: 9

6 Oct 1994

3040-01-396-7881
Spur Gearshaft

013967881
387-3786-3: RNCC: 3 | RNVC: 2
387-3786-3: RNCC: 3 | RNVC: 9
387-3786-3: RNCC: 5 | RNVC: 9

24 Sep 1994

3040-01-394-9691
Control Cam

013949691
406-071-110-107: RNCC: 3 | RNVC: 2

18 Aug 1994

3040-01-394-9685
Control Cam

013949685
406-071-110-105: RNCC: 3 | RNVC: 2

18 Aug 1994

3040-01-393-9895
Counterbalan Weight

013939895
9443164AA-7: RNCC: 3 | RNVC: 2
9443164AA-7: RNCC: 3 | RNVC: 9
9443164AA-7: RNCC: 5 | RNVC: 9
K-9443164AA-7: RNCC: 5 | RNVC: 9
K-9443164AA-7: RNCC: 5 | RNVC: 9
K-9443164AA-7: RNCC: 5 | RNVC: 9
9443164AA-7: RNCC: C | RNVC: 1
K-9443164AA: RNCC: D | RNVC: 9

1 Aug 1994

3040-01-393-9890
Counterbalance Weight

013939890
9443164AA-6: RNCC: 3 | RNVC: 9
K-9443164AA-6: RNCC: 5 | RNVC: 9
K-9443164AA-6: RNCC: 5 | RNVC: 9
9443164AA-6: RNCC: 5 | RNVC: 9
K-9443164AA-6: RNCC: 5 | RNVC: 9
9443164AA-6: RNCC: C | RNVC: 1
9443164AA-6: RNCC: C | RNVC: 1
K-9443164AA: RNCC: D | RNVC: 9

1 Aug 1994

3040-01-393-8375
Brake Backing Plate

013938375
73164: RNCC: 3 | RNVC: 2
74814: RNCC: 5 | RNVC: 9
54487: RNCC: 5 | RNVC: 9
58232: RNCC: 5 | RNVC: 9
58232: RNCC: C | RNVC: 1

28 Jul 1994

3040-01-393-7529
A Cylinder Assembly

013937529
8D00145-1: RNCC: 3 | RNVC: 2
8D00145-1: RNCC: 5 | RNVC: 9
8D00145: RNCC: D | RNVC: 9

26 Jul 1994

3040-01-393-4528
Shaft Collar

013934528
ASP-LC-MV08: RNCC: 3 | RNVC: 2
5PTV1501-8C: RNCC: 7 | RNVC: 2

20 Jul 1994

3040-01-393-3667
Spline Adapter

013933667
40020-1: RNCC: 3 | RNVC: 2
10002 ITEM 2: RNCC: 5 | RNVC: 2
40020 PART 40020-1: RNCC: 5 | RNVC: 2
10001 ITEM 2: RNCC: 5 | RNVC: 2

19 Jul 1994

3040-01-392-3875
Straight Axle

013923875
3202-Z-9932: RNCC: 3 | RNVC: 2
3202-Z-9932: RNCC: 5 | RNVC: 2
3202-Z-9932: RNCC: 5 | RNVC: 2

29 Jun 1994

3040-01-392-3874
Straight Axle

013923874
3202-Y-9931: RNCC: 3 | RNVC: 2
3202-Y-9931: RNCC: 5 | RNVC: 2
3202-Y-9931: RNCC: 5 | RNVC: 2

29 Jun 1994

3040-01-392-2463
Worm Shaft

013922463
50004-1: RNCC: 3 | RNVC: 2
40010 ITEM NO.12: RNCC: 5 | RNVC: 2
40010-12: RNCC: 5 | RNVC: 2
40010: RNCC: D | RNVC: 9

26 Jun 1994

3040-01-392-2427
Straight Shaft

013922427
11301-226: RNCC: 3 | RNVC: 2

26 Jun 1994

3040-01-391-9966
Shouldered Shaft

013919966
8D0054-1: RNCC: 3 | RNVC: 2
8W0184 ITEM 27-4: RNCC: 5 | RNVC: 9
8D0054: RNCC: 5 | RNVC: 9

21 Jun 1994

3040-01-391-3206
Pu Control Assembly

013913206
VCGT3100X06: RNCC: 3 | RNVC: 2
VCGR3100X06: RNCC: 3 | RNVC: 9
47105 ITEM 72: RNCC: 5 | RNVC: 2
47105 ITEM 72: RNCC: 5 | RNVC: 9

8 Jun 1994

3040-01-391-0732
Pu Control Assembly

013910732
89162-402: RNCC: 3 | RNVC: 2
NO 58R: RNCC: 5 | RNVC: 9
NO 58R5: RNCC: 5 | RNVC: 9

3 Jun 1994

3040-01-390-8212
Mechanicall Spindle

013908212
A-3213-P-1758S: RNCC: 3 | RNVC: 2
A-3213-P-1758: RNCC: 5 | RNVC: 2
A-3213-P-1758: RNCC: 5 | RNVC: 2
A-3213-P-1758: RNCC: 5 | RNVC: 2
A-3213-P-1758: RNCC: 5 | RNVC: 9

27 May 1994

3040-01-389-8967
Extension Shaft

013898967
G276872-1: RNCC: 3 | RNVC: 2
G276872-1: RNCC: 5 | RNVC: 2
G276872-1: RNCC: 5 | RNVC: 9

6 May 1994

3040-01-388-4686
Linear Actuating Cylinder Assembly

013884686
5WHP30KA: RNCC: 3 | RNVC: 2
5WHP30KAOU29137-4: RNCC: 5 | RNVC: 9

31 Mar 1994

3040-01-387-9257
Spur Gearshaft

013879257
6429518-1: RNCC: 3 | RNVC: 2
6429518-1: RNCC: 5 | RNVC: 9
6429518: RNCC: C | RNVC: 1

16 Mar 1994

3040-01-387-7257
Flexible Shaft Assembly Core

013877257
57353-103: RNCC: 3 | RNVC: 2

10 Mar 1994

3040-01-387-7224
Flexible Shaft Assembly Core

013877224
57353-65: RNCC: 3 | RNVC: 2
573-65: RNCC: 5 | RNVC: 9

10 Mar 1994

3040-01-387-4048
Rigid Connecting Link

013874048
D1046-03-G: RNCC: 3 | RNVC: 2
KTI-387-4048: RNCC: 5 | RNVC: 2
138K0080: RNCC: 5 | RNVC: 2
SPN00464: RNCC: 5 | RNVC: 2
CTC-1012-23-1: RNCC: 5 | RNVC: 2
138K0080: RNCC: 5 | RNVC: 9

4 Mar 1994

3040-01-386-8338
A Cylinder Assembly

013868338
81614: RNCC: 3 | RNVC: 2

16 Feb 1994

3040-01-385-1184
Remote Control Lever

013851184
370462-4: RNCC: 3 | RNVC: 9
370462-4: RNCC: 5 | RNVC: 9
370462: RNCC: D | RNVC: 9

4 Jan 1994

3040-01-385-1125
Remote Contro Lever

013851125
3341154-4: RNCC: 3 | RNVC: 2
3341154: RNCC: D | RNVC: 9

4 Jan 1994

3040-01-384-8912
Spline Adapter

013848912
0618620B: RNCC: 3 | RNVC: 2
GR2079A-: RNCC: D | RNVC: 9

23 Dec 1993

3040-01-384-6218
Shouldered Shaft

013846218
2499846: RNCC: 3 | RNVC: 2

19 Dec 1993

3040-01-384-1013
Shouldered Shaft

013841013
2499844: RNCC: 3 | RNVC: 2
2499844: RNCC: 3 | RNVC: 9
2499844: RNCC: 5 | RNVC: 9

8 Dec 1993

3040-01-384-0888
Remote Contro Lever

013840888
6534C592-1: RNCC: 3 | RNVC: 2
6534C592-1: RNCC: 5 | RNVC: 2
6534C592-1: RNCC: 5 | RNVC: 2

8 Dec 1993

3040-01-383-8645
Linear Actua Piston

013838645
87621-0105 ITEM 3: RNCC: 3 | RNVC: 2
518-4674751 ITEM 3MOD: RNCC: 5 | RNVC: 9
4674751-0003A: RNCC: 5 | RNVC: 9
518-4674751 ITE: RNCC: C | RNVC: 1

4 Dec 1993

3040-01-383-5928
Shaft Collar

013835928
808642001: RNCC: 3 | RNVC: 2
2650-3240 ITEM 44: RNCC: 3 | RNVC: 9
808642001: RNCC: 5 | RNVC: 9
2650-3240: RNCC: D | RNVC: 9
808642: RNCC: D | RNVC: 9

25 Nov 1993

3040-01-383-5016
Pneumat Accumulator

013835016
2V02250011: RNCC: 3 | RNVC: 2
351-002-000-0: RNCC: 5 | RNVC: 9
2V02250006 ITEM 73: RNCC: 5 | RNVC: 9

25 Nov 1993

3040-01-382-6660
Nonrota Eye Bracket

013826660
523122-1: RNCC: 3 | RNVC: 2
523122-1: RNCC: 5 | RNVC: 2
523122: RNCC: D | RNVC: 9

5 Nov 1993

3040-01-382-6572
Piston Ring

013826572
3177980-2: RNCC: 3 | RNVC: 2
10107291: RNCC: 6 | RNVC: 9

5 Nov 1993

3040-01-382-6522
Linear Ac Parts Kit

013826522
S26060: RNCC: 3 | RNVC: 2
4-181J-SB-M: RNCC: 5 | RNVC: 2
4-181J-SB-M: RNCC: 5 | RNVC: 9
6227763: RNCC: D | RNVC: 9

5 Nov 1993

3040-01-382-2814
Spline Adapter

013822814
1593588-9: RNCC: 3 | RNVC: 2
7-311B11134-3: RNCC: 3 | RNVC: 2
94-31300-01: RNCC: 5 | RNVC: 2
1588848-1: RNCC: 5 | RNVC: 9
1593588-9: RNCC: 5 | RNVC: 9
7-311811134-3: RNCC: 5 | RNVC: 9
7-311B11134-3: RNCC: 5 | RNVC: 9
7-311B11134: RNCC: C | RNVC: 1

29 Oct 1993

3040-01-381-0325
Counterbalan Weight

013810325
265353901: RNCC: 3 | RNVC: 2
2650-3240 ITEM 54: RNCC: 5 | RNVC: 9
2650-3245 ITEM 54: RNCC: 5 | RNVC: 9
265353901: RNCC: 5 | RNVC: 9
2650-3539: RNCC: 5 | RNVC: 9
265353901: RNCC: C | RNVC: 1

5 Oct 1993

3040-01-381-0197
Counterbalan Weight

013810197
265353801: RNCC: 3 | RNVC: 2
26535301: RNCC: 5 | RNVC: 2
2650-3240 ITEM 53: RNCC: 5 | RNVC: 9
2650-3245 ITEM 53: RNCC: 5 | RNVC: 9
265353801: RNCC: 5 | RNVC: 9
2650-3538: RNCC: 5 | RNVC: 9
265353801: RNCC: C | RNVC: 1

5 Oct 1993

3040-01-378-8302
Grease Cap

013788302
186-6290: RNCC: 3 | RNVC: 2

21 Aug 1993

3040-01-377-6805
Mechanical Actuator

013776805
12417482: RNCC: 1 | RNVC: 2
12417482: RNCC: 3 | RNVC: 2
85.62680.5701: RNCC: 5 | RNVC: 2
115200340061: RNCC: 5 | RNVC: 2
115200340061: RNCC: 5 | RNVC: 9
12417482: RNCC: 5 | RNVC: 9
12417482: RNCC: 5 | RNVC: 9

23 Jul 1993

3040-01-377-6615
Pawl

013776615
12389439: RNCC: 3 | RNVC: 2
12389439: RNCC: 5 | RNVC: 2

23 Jul 1993

3040-01-377-4222
Pu Control Assembly

013774222
D-43820-003-60.0: RNCC: 3 | RNVC: 9
3020-075-0152 AND 3021100-075: RNCC: 5 | RNVC: 2
D5540-545-09: RNCC: 5 | RNVC: 2
43820-003-60: RNCC: 5 | RNVC: 9
D-43820-003-60.0: RNCC: 5 | RNVC: 9
43820-003-60: RNCC: 5 | RNVC: 9
1034-B287: RNCC: D | RNVC: 9

15 Jul 1993

3040-01-377-3129
Mechanical Drive Housing

013773129
02-773291: RNCC: 3 | RNVC: 2
877221: RNCC: 5 | RNVC: 9
2HS659: RNCC: C | RNVC: 1

12 Jul 1993

3040-01-375-1516
Shouldered Shaft

013751516
792871-2: RNCC: 3 | RNVC: 2
792871-1: RNCC: 5 | RNVC: 9

6 May 1993

3040-01-374-2095
Remote Contro Lever

013742095
12389438: RNCC: 3 | RNVC: 2
12389438: RNCC: 5 | RNVC: 2

17 Apr 1993

3040-01-374-0204
Pu Control Assembly

013740204
56L32-2-88: RNCC: 3 | RNVC: 2
56L32-2-88: RNCC: 3 | RNVC: 9
56L-32-2-88: RNCC: 5 | RNVC: 2
22526-000-00: RNCC: 5 | RNVC: 9

14 Apr 1993

3040-01-372-8300
Camlock Assembly

013728300
9-163-010005: RNCC: 3 | RNVC: 2
9-163-010005: RNCC: 5 | RNVC: 2
9-163-010005: RNCC: 5 | RNVC: 2

19 Mar 1993

3040-01-372-7046
Shaft Collar

013727046
2HL808: RNCC: 3 | RNVC: 2
2HL808: RNCC: 5 | RNVC: 9
2000003: RNCC: 5 | RNVC: 9

17 Mar 1993

3040-01-372-1486
Control Cam

013721486
12417905: RNCC: 3 | RNVC: 2
12417905: RNCC: 5 | RNVC: 2
12417905: RNCC: 5 | RNVC: 2
12417905: RNCC: 5 | RNVC: 2

3 Mar 1993

3040-01-370-5485
Linear Actuating Cylinder Assembly

013705485
6-372-003474: RNCC: 3 | RNVC: 2
6-372-003474: RNCC: 5 | RNVC: 2
6-372-003474: RNCC: 5 | RNVC: 2

24 Jan 1993

3040-01-370-2889
Linear A Piston Rod

013702889
6-768-002503: RNCC: 3 | RNVC: 2
6-768-002503: RNCC: 5 | RNVC: 2
6-768-002503: RNCC: 5 | RNVC: 2

17 Jan 1993

3040-01-370-0231
Linear Actuating Cylinder Assembly

013700231
6-372-003475: RNCC: 3 | RNVC: 2
6-372-003475: RNCC: 5 | RNVC: 2
6-372-003475: RNCC: 5 | RNVC: 2

11 Jan 1993

3040-01-370-0225
Linear Actuating Cylinder

013700225
6-372-004235: RNCC: 3 | RNVC: 2
6-372-004235: RNCC: 5 | RNVC: 2
6-372-004235: RNCC: 5 | RNVC: 2
6-372-004335: RNCC: 5 | RNVC: 9

11 Jan 1993

3040-01-369-6635
Pawl

013696635
12524523: RNCC: 3 | RNVC: 2
465-4523: RNCC: 5 | RNVC: 2
465-4523: RNCC: 5 | RNVC: 9

31 Dec 1992

3040-01-369-5233
Straight Shaft

013695233
5N5129: RNCC: 3 | RNVC: 2

24 Dec 1992

3040-01-368-7672
A Cylinder Assembly

013687672
2-195-2-00021: RNCC: 3 | RNVC: 2
2-195-2-00021: RNCC: 5 | RNVC: 2
2-195-2-00021: RNCC: 5 | RNVC: 2

8 Dec 1992

3040-01-368-6569
A Cylinder Assembly

013686569
1H000006043: RNCC: 3 | RNVC: 2
CYSR 5000 HY84T2B15075063990: RNCC: 3 | RNVC: 9
89156937: RNCC: 5 | RNVC: 9

5 Dec 1992

3040-01-368-1354
Linear Actuating Cylinder Piston

013681354
8-C2830: RNCC: 3 | RNVC: 2
8-C2126: RNCC: 5 | RNVC: 9
C2126: RNCC: 5 | RNVC: 9

26 Nov 1992

3040-01-367-5494
Linear Actua Piston

013675494
8018-06: RNCC: 3 | RNVC: 2
8018-06: RNCC: 5 | RNVC: 9
6961-TA: RNCC: D | RNVC: 9

14 Nov 1992

3040-01-367-5492
Controllable Swashplate

013675492
38-D2228: RNCC: 3 | RNVC: 2
D2223: RNCC: 5 | RNVC: 9

14 Nov 1992

3040-01-366-9410
Shouldered Shaft

013669410
364-47127-000: RNCC: 3 | RNVC: 2
376-67954-000 ITEM 3: RNCC: 5 | RNVC: 2
376-67966-000 ITEM 3: RNCC: 5 | RNVC: 2
364-47127C: RNCC: 5 | RNVC: 9
364-48756-000 ITEM 3: RNCC: C | RNVC: 1
364-48946-000 ITEM 97: RNCC: C | RNVC: 1
376-67954-000: RNCC: D | RNVC: 9
376-67966-000: RNCC: D | RNVC: 9

4 Nov 1992

3040-01-366-0779
Pu Control Assembly

013660779
12351252-3: RNCC: 3 | RNVC: 2
12351252-3: RNCC: 5 | RNVC: 2
12351252-3: RNCC: 5 | RNVC: 2
12351252: RNCC: D | RNVC: 9

21 Oct 1992

3040-01-365-9172
Accumulator Bladder

013659172
E703001: RNCC: 3 | RNVC: 2
700405: RNCC: 5 | RNVC: 9
703001: RNCC: 5 | RNVC: 9

19 Oct 1992

3040-01-364-5402
Linear Actuating Cylinder Assembly

013645402
B-WK-406-C-1-B: RNCC: 3 | RNVC: 2
B-WK-406-C-1-B ITEM 1: RNCC: 5 | RNVC: 9
B-WK-406-C-1-B: RNCC: 5 | RNVC: 9

22 Sep 1992

3040-01-364-2195
Remote Contro Lever

013642195
14-017: RNCC: 3 | RNVC: 2
14-017: RNCC: 3 | RNVC: 9

14 Sep 1992

3040-01-363-8785
Dual Slave Winch Un

013638785
KR520: RNCC: 3 | RNVC: 2
KR760215: RNCC: C | RNVC: 1

8 Sep 1992

3040-01-363-4362
Mechan Housing Part

013634362
3883492-1: RNCC: 3 | RNVC: 2
3883492: RNCC: D | RNVC: 9

29 Aug 1992

3040-01-363-3766
Spline Adapter

013633766
3860791-1: RNCC: 3 | RNVC: 2

28 Aug 1992

3040-01-363-2541
Pawl

013632541
P1429-208B: RNCC: 3 | RNVC: 2
53X-02-174: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-363-2476
Spur Gearshaft

013632476
3882601-2: RNCC: 3 | RNVC: 2
3882601-2: RNCC: 5 | RNVC: 2
3882601: RNCC: D | RNVC: 9

27 Aug 1992

3040-01-362-1951
Push-Pull Control Assembly

013621951
29507766: RNCC: 3 | RNVC: 2
80036760: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 2
29507766: RNCC: 5 | RNVC: 9
10046147: RNCC: 6 | RNVC: 9

1 Aug 1992

3040-01-361-6180
Single Disk Brake

013616180
10C-0001SP ITEM 26: RNCC: 3 | RNVC: 2
610-5730: RNCC: 5 | RNVC: 2
5729: RNCC: 5 | RNVC: 9
5700-H: RNCC: C | RNVC: 1
10C-0001SP: RNCC: D | RNVC: 9

23 Jul 1992

3040-01-361-3279
Actuating Cylinder

013613279
1-1/8HHSL4CCVY: RNCC: 3 | RNVC: 2
1-1/SHHSL4CCVY: RNCC: 5 | RNVC: 9
1-1/8HH-A009A: RNCC: 5 | RNVC: 9
SER NO. 1009369: RNCC: 5 | RNVC: 9
1 1/8HHSL4CCAKY: RNCC: 5 | RNVC: 9
1009369-1 1/8HH-A009: RNCC: 5 | RNVC: 9
1 1-8HHSL4CCAKY: RNCC: 5 | RNVC: 9

14 Jul 1992

3040-01-361-0360
Manual Control Lever

013610360
6I0482: RNCC: 3 | RNVC: 2
7E9429: RNCC: 3 | RNVC: 9
3040013610360: RNCC: 5 | RNVC: 9
7E9429: RNCC: 5 | RNVC: 9

8 Jul 1992

3040-01-360-7952
Straight Shaft

013607952
319629: RNCC: 3 | RNVC: 2
319629: RNCC: 5 | RNVC: 9

1 Jul 1992

3040-01-360-6523
Mechanically Actuated Spindle

013606523
29537934: RNCC: 3 | RNVC: 2
29501574: RNCC: 5 | RNVC: 2
29501574: RNCC: 5 | RNVC: 2
29501574: RNCC: 5 | RNVC: 9
029200T: RNCC: C | RNVC: 1

28 Jun 1992

3040-01-360-4719
Pawl Peg Cushion

013604719
0480B0180: RNCC: 3 | RNVC: 2
0480B0180: RNCC: 5 | RNVC: 9

24 Jun 1992

3040-01-360-4448
Mechanical Drive Housing

013604448
16221: RNCC: 3 | RNVC: 2
5938679: RNCC: 5 | RNVC: 2

24 Jun 1992

3040-01-359-9870
Pu Control Assembly

013599870
5544224: RNCC: 3 | RNVC: 2
5544224: RNCC: 5 | RNVC: 2
5544224: RNCC: 5 | RNVC: 9

17 Jun 1992

3040-01-359-8464
Rigid Connecting Link

013598464
1873060 W: RNCC: 3 | RNVC: 2
1873060 W: RNCC: 5 | RNVC: 9

13 Jun 1992

3040-01-359-8367
Linear Actuating Cylinder Assembly

013598367
1873470: RNCC: 3 | RNVC: 2
1873470: RNCC: 5 | RNVC: 9

13 Jun 1992

3040-01-359-0634
Shou Shaft Assembly

013590634
89030-1: RNCC: 3 | RNVC: 9
89020 FIND 51: RNCC: 5 | RNVC: 9
89020 FIND 51: RNCC: C | RNVC: 1
89030-1: RNCC: C | RNVC: 1
89030: RNCC: D | RNVC: 9

28 May 1992

3040-01-358-6317
Rig Connecting Link

013586317
17P1A4554-1: RNCC: 3 | RNVC: 2

16 May 1992

3040-01-357-8642
Linear Actuating Cylinder Cap

013578642
23437: RNCC: 3 | RNVC: 2
23437: RNCC: 5 | RNVC: 2

3 May 1992

3040-01-357-5952
Shaft Collar

013575952
65363-06006-102: RNCC: 3 | RNVC: 2

27 Apr 1992

3040-01-357-5851
Shouldered Shaft

013575851
53X-01-147: RNCC: 3 | RNVC: 2
53X-01-147: RNCC: 5 | RNVC: 9
53X-01-147: RNCC: 5 | RNVC: 9

27 Apr 1992

3040-01-357-5850
Straight Shaft

013575850
53X-01-155: RNCC: 3 | RNVC: 9
53X-01-155: RNCC: C | RNVC: 1

27 Apr 1992

3040-01-357-5849
Straight Shaft

013575849
53X-01-153: RNCC: 3 | RNVC: 9
53X-01-153: RNCC: 5 | RNVC: 9
53X-01-153: RNCC: C | RNVC: 1

27 Apr 1992

3040-01-356-8877
Shouldered Shaft

013568877
2179-3429-050: RNCC: 3 | RNVC: 2
2179-3429-050: RNCC: 5 | RNVC: 2
2179-3429-010: RNCC: 5 | RNVC: 9
2179-3429-010: RNCC: 5 | RNVC: 9
2179-3429-010: RNCC: C | RNVC: 1

13 Apr 1992

3040-01-356-8674
Shouldered Shaft

013568674
50-470-0872-2: RNCC: 3 | RNVC: 9

12 Apr 1992

3040-01-356-6988
Shou Shaft Assembly

013566988
53-5282-4: RNCC: 3 | RNVC: 2
53-5282-4: RNCC: 5 | RNVC: 2
53-5282-4: RNCC: 5 | RNVC: 2
53-5282-4: RNCC: 5 | RNVC: 2
53-5282-4: RNCC: 5 | RNVC: 2
53-5282-4: RNCC: 5 | RNVC: 9
53-5282-4: RNCC: 5 | RNVC: 9
53-5282-4: RNCC: 5 | RNVC: 9
53-5282-4: RNCC: 5 | RNVC: 9
53-5282-4: RNCC: 5 | RNVC: 9

9 Apr 1992

3040-01-356-6837
Shouldered Shaft

013566837
12681865: RNCC: 3 | RNVC: 2
1862690W: RNCC: 5 | RNVC: 2
1862690W: RNCC: 5 | RNVC: 9

9 Apr 1992

3040-01-356-4589
Shouldered Shaft

013564589
12701506: RNCC: 3 | RNVC: 2
1863010W: RNCC: 5 | RNVC: 2
1863010W: RNCC: 5 | RNVC: 9

4 Apr 1992

3040-01-356-2707
Linear Actuating Cylinder Assembly

013562707
150235B: RNCC: 3 | RNVC: 2
1860860: RNCC: 3 | RNVC: 2
150235B: RNCC: 5 | RNVC: 2
1860860: RNCC: 5 | RNVC: 9

1 Apr 1992

3040-01-355-5042
Connector Assembly

013555042
4101103001: RNCC: 3 | RNVC: 2
4101-103-000: RNCC: 5 | RNVC: 9

19 Mar 1992

3040-01-354-8235
Dual Disk Brake

013548235
6-188-000174: RNCC: 3 | RNVC: 2
6-188-000174: RNCC: 5 | RNVC: 2
6-188-000174: RNCC: 5 | RNVC: 2
2HE971: RNCC: C | RNVC: 1

6 Mar 1992

3040-01-354-7287
Shouldered Shaft

013547287
114C2866-4: RNCC: 3 | RNVC: 2

5 Mar 1992

3040-01-354-5564
Remote Contro Lever

013545564
50322: RNCC: 3 | RNVC: 2

29 Feb 1992

NSN 3040-01-354-2800 013542800 IDLER,SHAFT

3040-01-354-2800
Shaft Idler

013542800
GS-2906: RNCC: 3 | RNVC: 2
1728090: RNCC: 5 | RNVC: 2
1728090: RNCC: 5 | RNVC: 9

26 Feb 1992

Load More Results