3030-12-341-9222

7810-25-134-0613 7810251340613 251340613 STARTNUMMER

5910-00-134-0613 5910001340613 001340613 is a capacitor whose capacitance value cannot be adjusted or varied having paper, plastic, or any combination of paper and plastic as the dielectric material with a metallic film deposited thereon. it may be a single unit or consist of two or more units which cannot be separated.

2520-12-134-0613 2520121340613 121340613 is a shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. it must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. the ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. it is not designed for use in aligning by fitting into corresponding holes of another item. for items used to support rotating members see axle(1), shouldered. for items not having any of the above conditions see pin, shoulder, headless. excludes shaft(1), straight; and axle(1), straight.

2540-15-134-0613 2540151340613 151340613 FLAP PRINCIPALE

6130-66-134-0613 6130661340613 661340613 is a component which converts available alternating current or direct current electrical power into a form required to operate another component or set. the item may consist of a combination of an invertor, vibrator; vibrator, interrupter; vibrator, self-rectifying; invertor, power, static; with a transformer and rectifier(s) employing electron tubes, semiconductor diode or metallic (dry disc) type components, or the synchronized secondary contact(s) of a vibrator, self-rectifying; or may consist of electron tubes, semiconductor diode or metallic (dry disc) type rectifiers and capacitors in transformerless (alternating current-direct current type) circuits which may be of the voltage-multiplier type. the item may incorporate a filter, direct current power and provisions for regulation of input and/or output voltage. the item may have special input, output, control or other facilities for applications in specialized environments such as medical, dental or other operations. excludes battery chargers and rotating machinery types of items, such as motor generators and dynamotors.