3030-12-326-0437

8405-12-121-1700 8405121211700 121211700

5985-17-121-1700 5985171211700 171211700 SPLITTER

5310-01-121-1700 5310011211700 011211700 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

4820-66-121-1700 4820661211700 661211700 is a valve permitting flow in one direction only. it does not have a stem, except when equipped with a lever and weight and has no pressure adjustment. it may be inline or cartridge (manifold) design.

5945-15-121-1700 5945151211700 151211700 is a relay switch which is actuated by the effect of internal heat generated by the current in its energizing circuit. for items actuated by ambient, rather than internal temperature changes, see switch, thermostatic.