3020-01-379-3480

Documents 7710-15-236-8397 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3020/us 3020-01-379-3480
Gear Cluster 3020013793480 013793480,072400 mounted on the engine, see generator, direct current

5998-15-188-7216 5998151887216 151887216 is a grouping of two or more physically connected or related electrical an/or electronic parts capable of dissassemblage. each component of the assemblage must be capable of functioning in accordance with its own item name. consists of a single printed circuit board or terminal board upon which are mounted separately manufactured electronic components such as capacitors, inductors, resistors, and the like. it may also include printed electronic components. the item is generally part of a subassembly and cannot be assigned a more definite item name. for items having a complete individual electrical/electronic function, use applicable item name such as amplifier (as modified); power supply; or the like. for items not having a complete individual electrical/electronic function, see applicable subassembly name, such as amplifier subassembly; power supply subassembly; or the like. for an assembly of electrical/electronic components mounted on other than a single printed wiring board, see electronic components assembly. excludes printed circuit boar

Oct 1993 5985-01-381-4193 Diplexer 064579RNCC: 3 | RNVC: 2 | MEDALS: Y | DAC: A 15 Oct 1993 3020-01-379-3480

2920-14-320-9420 2920143209420 143209420 is a generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. may also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. includes alternating current generators designed for use with a rectifier. excludes the major generator of "generating sets". for generators specifically designed for aircraft use and not mounted on the engine, see generator, direct current.

5310-99-654-3258 5310996543258 996543258 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.