Premium Information is available for this item - Upgrade for $1 a day
3020-01-316-7397
Bevel Gear
3020013167397 013167397 26M68-310-03 26M68-310-3 26M68-310
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL. View more Bevel Gear
May 2023
5
Marketplace 3020-01-316-7397
Request a Quotation from participating marketplace vendors
Related Documents 3020-01-316-7397 5+ Documents (More...)
/fsg-47/fsc-4730/us
-02 26M68-310-2 26M68-310 A gear in the form of a frustum of a cone, with straight, skewed, or curved
https//www.nsnlookup.com /fsg-30/fsc-3020/us 3020-01-316-7397 Bevel Gear 3020013167397 013167397 -03
Bevel Gear 3020013167397 013167397 -03 26M68-310-3 26M68-310 A gear in the form of a frustum of
a cone, with straight, skewed, or curved -02 26M68-310-2 26M68-310 A gear in the form of a frustum of
Bevel Gear 3020013167397 013167397 3020-01-316-7397 3020013167397 013167397 is a gear in the form
| RNVC: 2 | DAC: 5 13 Feb 1990 3120-01-315-2373 https//www.nsnlookup.com /fsg-30/fsc-3020/us 3020-01-316-7397
Bevel Gear 3020013167397 013167397 3020-01-314-9348 Bevel Gear 26M68-310 Loop Clamp G375381RNCC
314-5510 Flat Washer 26M68-331-8RNCC: 5 | RNVC: 9 | DAC: 5 1 Feb 1990 3020-01-314-9348 Bevel Gear 26M68-310
Loop Clamp G375381RNCC: 5 | RNVC: 2 | DAC: 5 13 Feb 1990 3120-01-315-2373 Thrust Washer Bearing 26M68-310
Restrictions 3020-01-316-7397
3020-01-316-7397 is a Bevel Gear that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3020-01-316-7397
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-01-316-7397
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- JB
Approved Sources 3020-01-316-7397
- Part Number
- Manufacturer
- Status
- 26M68-310-3
- Manufacturer
- 96169 - Electric Boat Corporation (Active)
- Primary Buy
- Primary Buy
- 26M68-310-3
- 1D309 - At And T Document Development (Obsolete)
- Canceled/Obsolete
- Canceled/Obsolete
- 26M68-310-03
- 96169 - Electric Boat Corporation (Active)
- Advisory Reference
- Advisory Reference
- 26M68-310
- 96169 - Electric Boat Corporation (Active)
- Informational Drawing
- Informational Drawing
Datasheet 3020-01-316-7397
- Characteristic
- Specifications
- FIIG
- Specifications
- A27300
- Material [MATT]
- Copper Alloy Overall
- Material Document And Classification [MDCL]
- Mil-B-21230 Alloy 1 Mil Spec Single Material Response Overall
- Teeth Quantity [AJLA]
- 52
- Teeth Type [CWMW]
- Straight
- Pressure Angle [CWPP]
- 20.0000 Degrees
- Pitch Angle [CWQD]
- 66.1333 Degrees
- Style Designator [STYL]
- Side Face, Front Hub Recessed, Back Hub Protruding
- Pitch Diameter [AGJS]
- 10.4000 Inches Nominal
- Nominal Overall Length [CWFR]
- 2.788 Inches
- Nominal Outside Diameter [CWCD]
- 10.502 Inches
- Face Nominal Width [CWRM]
- 1.250 Inches
- Nominal Distance Between Body Face And Protruding Hub End [CWQL]
- 2.315 Inches Second End
- Nominal Distance Between Body Face And Recessed Hub End [CWQR]
- 0.538 Inches First End
- Bore Style [ANTP]
- W/ 2 Keyways Both Ends
- Bore Nominal Diameter [CWRS]
- 0.754 Inches Both Ends
- Keyway Nominal Width [CWSN]
- 0.189 Inches Both Ends
- Nominal Distance From Bore Center To Keyway Bottom [CWSR]
- 0.477 Inches Both Ends
- Hub Style Designator [CWTR]
- Plain Both Ends
- Hub Nominal Diameter [CWTX]
- 2.000 Inches Both Ends
- Body Style [AAQL]
- Webbed, Offset, With Lightening Holes
DLA Procurement Analysis 3020-01-316-7397
Management Data 3020-01-316-7397
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3020-01-316-7397
Freight Information 3020-01-316-7397
3020-01-316-7397 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 121870. A Sub NMFC of X. It has a NMFC Description of GEAR/SPEED INCREASING/REDUCING MACH. 3020-01-316-7397 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64910 which rates the freight between FCL and LCL. 3020-01-316-7397 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 586 for ocean manifesting and military sealift. 3020-01-316-7397 is not classified as a special type of cargo when transported by water. 3020-01-316-7397 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3020-01-316-7397 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: