3020-01-297-4500

3356 https//www.nsnlookup.com /cage General Motors Corp (CAGE Code 61928) | DAC: 6 3 Jun 1982 3020-01-297-4500

3110-22-626-1795 3110226261795 226261795 is a nonadjustable roller bearing consisting of a single or multiple-row of hardened cylindrical rollers and a retainer used with or without inner or oute r rings. excludes bearing, roller, airframe.

5305-00-626-1795 5305006261795 006261795 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

5970-01-626-1795 5970016261795 016261795 is an insulator having flat surfaces, with or without holes, whose thickness does not exceed 25 percent of its length or width, whichever is smaller, and whose shape is other than round. excludes insulator (1), spacer; insulator (1), washer; mounting pad, electrical-electronic component; plate, electrical shield; and terminal board.

5365-99-626-1795 5365996261795 996261795 is a resilient metal item, circular or nearly circular, which is designed to be inserted into an internal or external groove and retained by its own spring action, or it may have external prongs or projections designed to be inserted into a hole and retained by spring action of the prongs which grip by imbedding into the material. for items having internal prongs which perform the same function, see push on nut. it is used to keep and/or lock a part(s) in position, as a ball bearing on a shaft or in a housing. see also clip, retaining and pin, lock. excludes ring, connecting, round.