Premium Information is available for this item - Upgrade for $1 a day
3020-01-083-6974
Internal Gear
3020010836974 010836974 42292E77
A gear with teeth formed on the inner surface of a cylinder or cone. View more Internal Gear
November 2023
4
Marketplace 3020-01-083-6974
Request a Quotation from participating marketplace vendors
Related Documents 3020-01-083-6974 1+ Documents (More...)
BUY NE FedMall Updated Every Day 3020-01-083-6974 RQST NE Updated Every Day 3020-01-083-6974 RQST
Updated Every Day 3020-01-083-6974 RQST NE Related Documents 3020-01-083-6974 1+ Documents ( More...
Restrictions 3020-01-083-6974
3020-01-083-6974 is a Internal Gear that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3020-01-083-6974
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-01-083-6974
- US Air Force (FUGC)
- Effective Date:
- 1 Nov 2009
- Former MOE Rule:
- FUU5
Approved Sources 3020-01-083-6974
- Part Number
- Manufacturer
- Status
- 42292E77
- Manufacturer
- 82402 - Triumph Gear Systems Inc (Active)
- Primary Buy
- Primary Buy
Datasheet 3020-01-083-6974
- Characteristic
- Specifications
- FIIG
- Specifications
- A27300
- Body Style [AAQL]
- Webbed, Offset, With Lightening Holes
- Bore Nominal Diameter [CWRS]
- 0.760 Inches Both Ends
- Bore Style [ANTP]
- Plain Both Ends
- End Nominal Length [CWWH]
- 0.780 Inches First End
- End Nominal Diameter [CWWN]
- 1.180 Inches First End
- Face Nominal Width [CWRM]
- 0.930 Inches
- First Step Nominal Diameter [CWXB]
- 1.312 Inches First End
- First Step Nominal Length [CWWS]
- 0.900 Inches First End
- Hub Style Designator [CWTR]
- 3 Steps First End
- Material Document And Classification [MDCL]
- Mil-S-5000 Mil Spec Single Material Response Overall
- Nominal Distance Between Body Face And Protruding Hub End [CWQL]
- 3.340 Inches Both Ends
- Nominal Overall Length [CWFR]
- 3.440 Inches
- Nominal Outside Diameter [CWCD]
- 4.670 Inches
- Material [MATT]
- Steel Comp 4340 Overall
- Pitch Diameter [AGJS]
- 4.2000 Inches Nominal
- Pressure Angle [CWPP]
- 25.0000 Degrees
- Second Step Nominal Diameter [CWXL]
- 1.378 Inches First End
- Second Step Nominal Length [CWXG]
- 0.600 Inches First End
- Tooth Direction [CWNM]
- Right
- Tooth Form [CWNH]
- Standard
- Style Designator [STYL]
- Solid Back Ring, Protruding Hub, Recessed Hub
- Teeth Quantity [AJLA]
- 84
- Teeth Type [CWMW]
- Spur
- Third Step Nominal Diameter [CWXT]
- 1.500 Inches First End
- Third Step Nominal Length [CWXP]
- 0.060 Inches First End
Weapon Systems (WSDC) 3020-01-083-6974
DLA Procurement Analysis 3020-01-083-6974
- Last Stock Position:
- 2 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3020-01-083-6974
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- LE
- LANDING GEAR SYSTEMS AND COMPONENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3020-01-083-6974
Freight Information 3020-01-083-6974
3020-01-083-6974 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 197339. A Sub NMFC of X. It has a NMFC Description of WHEELS COG/GEAR/PINION I/S. 3020-01-083-6974 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 96710 which rates the freight between FCL and LCL. 3020-01-083-6974 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3020-01-083-6974 is not classified as a special type of cargo when transported by water. 3020-01-083-6974 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3020-01-083-6974 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: