Premium Information is available for this item - Upgrade for $1 a day
3020-00-930-4267
Spur Gear
3020009304267 009304267 354331
A gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. See also GEAR, ANTIBACKLASH, SPUR. For bulk material, see ROD, PINION. View more Spur Gear
November 2023
3
Marketplace 3020-00-930-4267
Request a Quotation from participating marketplace vendors
Related Documents 3020-00-930-4267 1+ Documents (More...)
Restrictions 3020-00-930-4267
3020-00-930-4267 is a Spur Gear that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3020-00-930-4267
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-00-930-4267
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Supplementary Collaborators:
- KE
Approved Sources 3020-00-930-4267
- Part Number
- Manufacturer
- Status
- 354331
- Manufacturer
- 59364 - Honeywell International Inc. (Active)
- Primary Buy
- Primary Buy
- 354331
- 99193 - Honeywell International Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3020-00-930-4267
- Characteristic
- Specifications
- FIIG
- Specifications
- A27300
- Body Style [AAQL]
- Webbed, Offset, Solid
- Bore Nominal Diameter [CWRS]
- 0.250 Inches Both Ends
- Bore Style [ANTP]
- W/ Keyway Both Ends
- Face Nominal Width [CWRM]
- 0.192 Inches
- Hub Style Designator [CWTR]
- Plain Both Ends
- Hub Nominal Diameter [CWTX]
- 0.400 Inches Second End
- Hub Nominal Diameter [CWTX]
- 0.440 Inches First End
- Material Document And Classification [MDCL]
- Mil-S-5000 Mil Spec Single Material Response Overall
- Nominal Distance Between Body Face And Protruding Hub End [CWQL]
- 0.100 Inches First End
- Nominal Distance Between Body Face And Recessed Hub End [CWQR]
- 0.008 Inches Second End
- Nominal Distance From Bore Center To Keyway Bottom [CWSR]
- 0.165 Inches Both Ends
- Nominal Outside Diameter [CWCD]
- 1.442 Inches
- Hardness Rating [CQFM]
- 34.0 Rockwell C Minimum And 38.0 Rockwell C Maximum Hub
- Hardness Rating [CQFM]
- 34.0 Rockwell C Minimum And 38.0 Rockwell C Maximum Teeth
- Material [MATT]
- Steel Overall
- Keyway Nominal Width [CWSN]
- 0.062 Inches Both Ends
- Pitch Diameter [AGJS]
- 1.3415 Inches Nominal
- Pressure Angle [CWPP]
- 20.0000 Degrees
- Tooth Form [CWNH]
- Standard
- Style Designator [STYL]
- One Protruding Hub, One Recessed Hub
- Teeth Quantity [AJLA]
- 27
Weapon Systems (WSDC) 3020-00-930-4267
DLA Procurement Analysis 3020-00-930-4267
- Last Stock Position:
- 18 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3020-00-930-4267
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of āLā or āFā, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3020-00-930-4267
Freight Information 3020-00-930-4267
3020-00-930-4267 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 062070. A Sub NMFC of Z. It has a NMFC Description of GEAR MOTORS/PARTS NOI. 3020-00-930-4267 is rated as a variable freight class when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64910 which rates the freight between FCL and LCL. 3020-00-930-4267 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3020-00-930-4267 is not classified as a special type of cargo when transported by water. 3020-00-930-4267 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3020-00-930-4267
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- 2lb or less, one dimension over 2", but less than 24"
- Above 110G
- MIL-PRF-16173, Cosmoline, Grade 2, Soft Film
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 2.0" H x 2.0" W x 1.0" L
- --
- --
- Preservative Coating Only
- Any Suitable Process
- 2.0" H x 2.0" W x 1.0" L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- MIL-PRF-16173, Grade 2, Corrosion Preventive, Solvent Cutback, Cold Application, Soft Film
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
- No Requirement
- Not Applicable
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
- No special marking
- MIL-PRF-121, Type II, Light Duty, Greaseproof, Waterproof Barrier
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3020-00-930-4267 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- F
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Y
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: