Premium Information is available for this item - Upgrade for $1 a day
3020-00-870-8146
Spur Antibacklash Gear
3020008708146 008708146 1755256 555-00-200000000
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required. View more Spur Antibacklash Gear
May 2023
9
Marketplace 3020-00-870-8146
Request a Quotation from participating marketplace vendors
Related Documents 3020-00-870-8146 1+ Documents (More...)
United States (US) 4. 3020-00-870-8146 Marketplace Restrictions Approved Sources Datasheet Management
BUY NE FedMall Updated Every Day 3020-00-870-8146 RQST NE Updated Every Day 3020-00-870-8146 RQST
Restrictions 3020-00-870-8146
3020-00-870-8146 is a Spur Antibacklash Gear that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3020-00-870-8146
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-00-870-8146
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
Approved Sources 3020-00-870-8146
- Part Number
- Manufacturer
- Status
- 1755256
- Manufacturer
- 56232 - Lockheed Martin Corporation (Active)
- Primary Buy
- Primary Buy
- 555-00-200000000
- D0078 - Diehl Defence Gmbh & Co. Kg (Active)
- Secondary Buy
- Secondary Buy
Datasheet 3020-00-870-8146
- Characteristic
- Specifications
- FIIG
- Specifications
- A27300
- Bore Nominal Diameter [CWRS]
- 0.094 Inches Both Ends
- Bore Style [ANTP]
- Plain Both Ends
- Face Nominal Width [CWRM]
- 0.157 Inches
- Hub Nominal Diameter [CWTX]
- 0.218 Inches Both Ends
- Hub Style Designator [CWTR]
- Plain Both Ends
- Material Document And Classification [MDCL]
- Qq-A-225/6 Fed Spec Single Material Response Teeth
- Material Document And Classification [MDCL]
- Qq-S-763 Fed Spec Single Material Response Hub
- Nominal Distance Between Body Face And Protruding Hub End [CWQL]
- 0.062 Inches Both Ends
- Nominal Outside Diameter [CWCD]
- 0.618 Inches
- Nominal Overall Length [CWFR]
- 0.280 Inches
- Material [MATT]
- Aluminum Alloy 2024 Teeth
- Material [MATT]
- Steel Comp 303 Hub
- Pitch Diameter [AGJS]
- 0.6000 Inches Nominal
- Pressure Angle [CWPP]
- 14.0000 Degrees
- Tooth Form [CWNH]
- Standard
- Style Designator [STYL]
- Protruding Hubs
- Surface Treatment [SFTT]
- Anodize Teeth
- Surface Treatment [SFTT]
- Passivate Hub
- Teeth Quantity [AJLA]
- 60
DLA Procurement Analysis 3020-00-870-8146
Management Data 3020-00-870-8146
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- NT
- AIRCRAFT INSTRUMENTS
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3020-00-870-8146
Freight Information 3020-00-870-8146
3020-00-870-8146 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 121870. A Sub NMFC of X. It has a NMFC Description of GEAR/SPEED INCREASING/REDUCING MACH. 3020-00-870-8146 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64910 which rates the freight between FCL and LCL. 3020-00-870-8146 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3020-00-870-8146 is not classified as a special type of cargo when transported by water. 3020-00-870-8146 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Contracting Technical Data File (CTDF) 3020-00-870-8146 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- N
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- N
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: