Premium Information is available for this item - Upgrade for $1 a day
3020-00-298-7735
Bevel Gear
3020002987735 002987735 117D2058
A gear in the form of a frustum of a cone, with straight, skewed, or curved teeth, cut on the external face. See also GEAR, ANTIBACKLASH, BEVEL. View more Bevel Gear
November 2023
5
Marketplace 3020-00-298-7735
Request a Quotation from participating marketplace vendors
Related Documents 3020-00-298-7735 2+ Documents (More...)
Restrictions 3020-00-298-7735
3020-00-298-7735 is a Bevel Gear that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. This item has been confirmed as a Critical Munitions List Item or a Sensitive Commerce Control List Item and cannot be in the possession of any party anywhere in the World who is not an authorized NATO Government. Any other possessor of this item should mutilate it now as possession violates international and local laws. This item is a confirmed Commerce Control List Item (CCLI). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3020-00-298-7735
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-00-298-7735
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- Republic of Korea (ZH01)
- Effective Date:
- 1 May 2011
Approved Sources 3020-00-298-7735
- Part Number
- Manufacturer
- Status
- 117D2058
- Manufacturer
- 05606 - General Dynamics-Ots, Inc. (Active)
- Primary Buy
- Primary Buy
Datasheet 3020-00-298-7735
- Characteristic
- Specifications
- FIIG
- Specifications
- A27300
- Body Style [AAQL]
- Plain, Solid
- Bore Nominal Diameter [CWRS]
- 0.6500 Inches Both Ends
- Bore Style [ANTP]
- Involute Spline Both Ends
- End Nominal Length [CWWH]
- 1.7290 Inches Second End
- End Nominal Diameter [CWWN]
- 0.9834 Inches Second End
- Face Nominal Width [CWRM]
- 0.5650 Inches
- First Step Nominal Diameter [CWXB]
- 1.1500 Inches Second End
- First Step Nominal Length [CWWS]
- 0.3500 Inches Second End
- Hardness Rating [CQFM]
- 35.0 Rockwell C Nominal Hub
- Hardness Rating [CQFM]
- 60.0 Rockwell C Nominal Teeth
- Hub Style Designator [CWTR]
- 1 Step Second End
- Nominal Distance Between Body Face And Protruding Hub End [CWQL]
- 2.0790 Inches Second End
- Nominal Outside Diameter [CWCD]
- 2.4640 Inches
- Material [MATT]
- Steel Comp E9310 Overall
- Material Document And Classification [MDCL]
- 66 Fed Std Single Material Response Overall And Aisi/Sae 9310 Assn Std Single Material Response Overall
- Pressure Angle [CWPP]
- 20.0000 Degrees
- Precision Classification [CWWK]
- Quality Number 9
- Pitch Diameter [AGJS]
- 2.3333 Inches Nominal
- Pitch Angle [CWQD]
- 38.2499 Degrees
- Special Features [FEAT]
- Counterbore On Second End,0.750 In. Dia,0.630 In. Deep
- Spline Pitch Diameter [BDTX]
- 0.6000 Inches Nominal Both Ends
- Spline Quantity [ABSA]
- 12 Both Ends
- Style Designator [STYL]
- Peripheral Face, Back Hub Protruding
- Surface Treatment Document And Classification [STDC]
- 171,Finish 5.3.1.2 Or 5.3.2.2 Mil Std Single Treatment Response Overall
- Surface Treatment [SFTT]
- Phosphate Overall
- Teeth Quantity [AJLA]
- 28
- Teeth Type [CWMW]
- Straight
Weapon Systems (WSDC) 3020-00-298-7735
DLA Procurement Analysis 3020-00-298-7735
- Last Stock Position:
- 14 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3020-00-298-7735
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
NATO Stock Numbers Related to 3020-00-298-7735
Freight Information 3020-00-298-7735
3020-00-298-7735 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 121870. A Sub NMFC of X. It has a NMFC Description of GEAR/SPEED INCREASING/REDUCING MACH. 3020-00-298-7735 is rated as class 77.5 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64910 which rates the freight between FCL and LCL. 3020-00-298-7735 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 586 for ocean manifesting and military sealift. 3020-00-298-7735 is not classified as a special type of cargo when transported by water. 3020-00-298-7735 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3020-00-298-7735
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- Physical Protection
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- --
- --
- MIL-DTL-117, Type II, Class C, Style 1, Heavy Duty, Waterproof, Greaseproof, Opaque Bag
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM-D5118, Type CF, Class Weather-Resistant, Corrugated Fiberboard Box
Procurement History 3020-00-298-7735 5 Records
- Contract
- Date
- CAGE
- Quantity
- Net Price
- Std Price
- CAGE
- SPE7L516M0198
- 13 Nov 2015
- Subscribe
- 8
- Subscribe
- Subscribe
- Subscribe
- SPE7L215M0889
- 06 Feb 2015
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE7L214V4881
- 27 Aug 2014
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE7L014V3212
- 14 Apr 2014
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
- SPE7L214M0860
- 30 Jan 2014
- Subscribe
- 1
- Subscribe
- Subscribe
- Subscribe
Contracting Technical Data File (CTDF) 3020-00-298-7735 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: