Premium Information is available for this item - Upgrade for $1 a day
3020-00-240-9919
Spur Antibacklash Gear
3020002409919 002409919 S9702AR0021 S9702AR021 116C3676
An item having one fixed gear and one free gear, both having the same complement of spur gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required. View more Spur Antibacklash Gear
November 2023
8
Marketplace 3020-00-240-9919
Request a Quotation from participating marketplace vendors
Related Documents 3020-00-240-9919 3+ Documents (More...)
RQST NE Updated Every Day 3020-00-240-9919 RQST Updated Every Day 3020-00-240-9919 RQST NE Related Documents
3020-00-240-9919 3+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3020/us 3020-00-240-9919
Spur Antibacklash Gear 3020002409919 United States (US) 4. 3020-00-240-9919 Marketplace Restrictions
Approved Sources Datasheet Management RQST NE Updated Every Day 3020-00-240-9919 RQST Updated Every
Updated Every Day 3040-01-240-9919 RQST Updated Every https//www.nsnlookup.com /fsg-30/fsc-3020/us 3020-00-240-9919
Spur Antibacklash Gear 3020002409919 vendors Request Updated Every Day 3020-00-240-9919 https//
Restrictions 3020-00-240-9919
3020-00-240-9919 is a Spur Antibacklash Gear that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. The precious metals content of this item is unknown.
Import and Export 3020-00-240-9919
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-00-240-9919
- US Army (A920)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- A181
- Supplementary Receivers:
- BF
- US Air Force (FXGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FXAX
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- N9CD
- Supplementary Collaborators:
- GTKE
- Republic of Korea (ZH01)
- Effective Date:
- 1 Aug 1995
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3020-00-240-9919
- Part Number
- Manufacturer
- Status
- S9702AR0021
- Manufacturer
- 00328 - Designatronics Incorporated (Active)
- Primary Buy
- Primary Buy
- S9702AR021
- 00328 - Designatronics Incorporated (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- S9702AR021
- 51381 - Butler Precision Belting Inc Dba Bpb (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- S9702AR021
- 9U847 - Shefford-Meade Inc, Judith M. Wayne, (Active)
- Canceled/Obsolete
- Canceled/Obsolete
- 116C3676
- 05606 - General Dynamics-Ots, Inc. (Active)
- Canceled/Obsolete
- Canceled/Obsolete
Datasheet 3020-00-240-9919
- Characteristic
- Specifications
- FIIG
- Specifications
- A27300
- Material [MATT]
- Steel Corrosion Resisting Overall
- Surface Treatment [SFTT]
- Passivate Overall
- Teeth Quantity [AJLA]
- 90
- Tooth Form [CWNH]
- Standard
- Pressure Angle [CWPP]
- 20.0000 Degrees
- Style Designator [STYL]
- Protruding Hub
- Pitch Diameter [AGJS]
- 1.4062 Inches Nominal
- Nominal Outside Diameter [CWCD]
- 1.4375 Inches
- Face Nominal Width [CWRM]
- 0.106 Inches
- Nominal Distance Between Body Face And Protruding Hub End [CWQL]
- 0.219 Inches First End
- Bore Style [ANTP]
- Plain Both Ends
- Bore Nominal Diameter [CWRS]
- 0.120 Inches Both Ends
- Hub Style Designator [CWTR]
- Split First End
- Hub Nominal Diameter [CWTX]
- 0.188 Inches First End
- Clamping Surface Nominal Length [CWWC]
- 0.172 Inches First End
Weapon Systems (WSDC) 3020-00-240-9919
DLA Procurement Analysis 3020-00-240-9919
- Last Stock Position:
- 16 In Stock
- DLA Administrative Lead Time:
- Subscribe
- DLA Production Lead Time:
- Subscribe
Management Data 3020-00-240-9919
Army
- Materiel Category and Inventory Manager:
- J
- Ground Forces Support Materiel (DLA/GSA Items)
- Appropriation and Budget Activity:
- 2
- Stock Fund Secondary Items
- Management Inventory Segment:
- 2
- Non-Repairable Items(Exclusive of Insurance and Provisioning Items)
This code will be used to identify items, which are not reparable.
- Weapons System / End Item / Homogeneous Group:
- 00
- DLA/GSA Material
DLA/GSA-Managed Items that cannot be identified to a specific Army Weapons Systems/End Item
- Accounting Requirements:
- X
- Expendable item.An item of Army property coded with an ARC of X in the AMDF. Expendable items require no formal accountability after issue from a stock record account.Commercial and fabricated items similar to items coded X in the AMDF are considered expendable items.
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- SX
- SICA RESIDUAL MMAC-OC-ALC
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
Similar Supply Items to 3020-00-240-9919
Freight Information 3020-00-240-9919
3020-00-240-9919 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 197339. A Sub NMFC of X. It has a NMFC Description of WHEELS COG/GEAR/PINION I/S. 3020-00-240-9919 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 96710 which rates the freight between FCL and LCL. 3020-00-240-9919 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3020-00-240-9919 is not classified as a special type of cargo when transported by water. 3020-00-240-9919 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3020-00-240-9919
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- No Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- --
- No Requirement
- Not Applicable
- PPP-B-566, PPP-B-676, or ASTM-D5118, Folding, Setup or Fiberboard Box
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Procurement History 3020-00-240-9919 3 Records
Contracting Technical Data File (CTDF) 3020-00-240-9919 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: