Premium Information is available for this item - Upgrade for $1 a day
3020-00-232-0908
Worm Wheel Antibacklash Gear
3020002320908 002320908 WE10S 927005-1
An item having one fixed gear and one free gear, both having the same complement of worm wheel gear teeth, mounted on a common hub. The free gear is attached to the fixed gear by springs and operates as one gear. Upon installation with the mating gear, the teeth of the free moving gear are preset to mesh with teeth other than those of the fixed gear. This spring tension between the fixed gear and the free gear eliminates any free motion between the driver and the driven gear. The gear is used where identical and accurate transmitted motion between gears is required. View more Worm Wheel Antibacklash Gear
May 2023
19
Marketplace 3020-00-232-0908
Request a Quotation from participating marketplace vendors
Related Documents 3020-00-232-0908 5+ Documents (More...)
RQST NE Updated Every Day 3020-00-232-0908 RQST Updated Every Day 3020-00-232-0908 RQST NE Related Documents
3020-00-232-0908 5+ Documents ( More... ) https//www.nsnlookup.com /fsg-30/fsc-3020/us 3020-00-232-0908
Day 4730-00-160-8228 RQST NE Related Documents https//www.nsnlookup.com /fsg-30/fsc-3020/us 3020-00-232-0908
Worm Wheel Antibacklash Gear 3020002320908 day Upgrade your Account Upgrade 3020-00-232-0908Worm
Worm Wheel Antibacklash Gear 3020002320908 Upgrade your Account Upgrade 3020-00-232-0908Worm Wheel
Antibacklash Gear3020002320908 002320908 WE10S 927005 Upgrade your Account Upgrade 3020-00-232-0908Worm
6130014355321014355321 day Upgrade your Account Upgrade 6130-01-435-5321Power Supply6130014355321 014355321259180-002320908
$1 a day Upgrade your Account Upgrade 6130-01- 435-5321Power Supply6130014355321 014355321259180 -002320908
Worm Wheel Antibacklash Gear 3020002320908 014355321 www.nsnlookup.com /fsg-61/fsc-6130/us 6130
Restrictions 3020-00-232-0908
3020-00-232-0908 is a Worm Wheel Antibacklash Gear that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3020-00-232-0908
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3020-00-232-0908
- US Air Force (FGGC)
- Effective Date:
- 1 Jul 2005
- Former MOE Rule:
- FGAX
- Spain (YB01)
- Effective Date:
- 1 Jun 1999
- Republic of Korea (ZH01)
- Effective Date:
- 1 Apr 1991
- Netherlands (ZN01)
- Effective Date:
- 1 Apr 1991
- Portugal (ZP01)
- Effective Date:
- 1 Jul 1999
- Denmark (ZS01)
- Effective Date:
- 1 Apr 1991
- Greece (ZU01)
- Effective Date:
- 1 Mar 2008
- Turkey (ZW01)
- Effective Date:
- 1 Nov 2005
Approved Sources 3020-00-232-0908
- Part Number
- Manufacturer
- Status
- WE10S
- Manufacturer
- 00328 - Designatronics Incorporated (Active)
- Primary Buy
- Primary Buy
- 927005-1
- 09205 - Lockheed Martin Corp Electronics And (Active)
- Vendor Drawing
- Vendor Drawing
Datasheet 3020-00-232-0908
- Characteristic
- Specifications
- FIIG
- Specifications
- A27300
- Attachment Method [ABSX]
- Clamp
- Bore Nominal Diameter [CWRS]
- 0.250 Inches Both Ends
- Bore Style [ANTP]
- Plain Both Ends
- Clamping Surface Nominal Length [CWWC]
- 0.215 Inches First End
- Face Nominal Width [CWRM]
- 0.187 Inches
- Face Type [ALPN]
- Concave
- Helix Angle [CWPZ]
- 7.0000 Degrees
- Hub Nominal Diameter [CWTX]
- 0.312 Inches First End
- Hub Style Designator [CWTR]
- Split First End
- Material Document And Classification [MDCL]
- Qq-S-764 Fed Spec Single Material Response Hub
- Mating Thread Lead Quantity [CWPL]
- 2
- Nominal Distance Between Body Face And Protruding Hub End [CWQL]
- 0.215 Inches First End
- Nominal Outside Diameter [CWCD]
- 2.070 Inches
- Nominal Overall Length [CWFR]
- 0.402 Inches
- Material [MATT]
- Steel Comp 303 Hub
- Pressure Angle [CWPP]
- 20.0000 Degrees
- Pitch Diameter [AGJS]
- 1.8740 Inches Minimum And 1.8750 Inches Maximum
- Style Designator [STYL]
- Protruding Hub
- Surface Treatment [SFTT]
- Passivate Hub
- Teeth Quantity [AJLA]
- 90
- Throat Nominal Radius [CWNP]
- 0.155 Inches
- Tooth Direction [CWNM]
- Right
Weapon Systems (WSDC) 3020-00-232-0908
DLA Procurement Analysis 3020-00-232-0908
Management Data 3020-00-232-0908
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Aggregation Code:
- AB
- AIM-9 (SIDE WINDER)
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Similar Supply Items to 3020-00-232-0908
Freight Information 3020-00-232-0908
3020-00-232-0908 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 197339. A Sub NMFC of X. It has a NMFC Description of WHEELS COG/GEAR/PINION I/S. 3020-00-232-0908 is rated as class 65 when transported by Less-Than Truckload (LTL) freight. 3020-00-232-0908 is rated as class 60 when transported by Less-Than Carload (LCL) rail or ocean freight. It has a Uniform Freight Classification (UFC) number of 96710 which rates the freight between FCL and LCL. 3020-00-232-0908 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3020-00-232-0908 is not classified as a special type of cargo when transported by water. 3020-00-232-0908 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3020-00-232-0908
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- --
- --
- --
- --
- Any Suitable Process
- --
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- No Requirement
- No Requirement
- --
- --
- Vendor's Fiberboard Box
- No special marking
- No Requirement
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- ASTM - D5118, Fiberboard Box
Contracting Technical Data File (CTDF) 3020-00-232-0908 October 2021
Criticality and Quality
- Critical Item Code:
- X
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- T
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: