Premium Information is available for this item - Upgrade for $1 a day
3010-01-506-4140
Nonvehicular Universal Joint
3010015064140 015064140 SS650M/BN52521
A flexible connection designed for nonvehicular applications which permits rotary motion to be transmitted between two shafts located at an angle to each other. The angle between the shafts may be continually varied within certain limits; the connecting ends must have either a flange, hub, or splined stub shaft; the plain portion of a splined stub shaft must not exceed the length of the splines. Excludes drive or propeller shafts with joint(s) at one or both ends. See UNIVERSAL JOINT,GEARED. View more Nonvehicular Universal Joint
June 2023
1
Marketplace 3010-01-506-4140
Request a Quotation from participating marketplace vendors
Related Documents 3010-01-506-4140 2+ Documents (More...)
Restrictions 3010-01-506-4140
3010-01-506-4140 is a Nonvehicular Universal Joint that does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. Demilitarization of this item has been confirmed and is not currently subject to changes. This item is considered a low risk when released from the control of the Department of Defense. The item may still be subject to the requirements of the Export Administration Regulations (EAR) and the Code of Federal Regulations (CFR). This item is not suspected to be hazardous. This item does not contain a precious metal.
Import and Export 3010-01-506-4140
- Schedule B
- Subscribe to View Schedule B
- HTS Code
- Subscribe to View HTS Code
End Users 3010-01-506-4140
- US Air Force (FGGC)
- Effective Date:
- 1 Oct 2005
- US Navy (N9BC)
- Effective Date:
- 1 Jul 2005
- Supplementary Collaborators:
- KE
Approved Sources 3010-01-506-4140
- Part Number
- Manufacturer
- Status
- SS650M/BN52521
- Manufacturer
- 83529 - Lovejoy, Llc (Active)
- Primary Buy
- Primary Buy
Datasheet 3010-01-506-4140
- Characteristic
- Specifications
- FIIG
- Specifications
- A521W0
- End Item Identification [AGAV]
- Lifting Assy Ground Support Equip, V-22Acft
- Connection End Type [BYRC]
- Hub,Bored First End
- Connection End Type [BYRC]
- Hub,Bored Second End
- Design Type [APGF]
- Block And Pin
- Hub Bore Diameter [BDDS]
- 0.753 Inches Minimum First End And 0.751 Inches Maximum First End
- Hub Bore Diameter [BDDS]
- 0.753 Inches Minimum Second End And 0.751 Inches Maximum Second End
- Overall Length [ABHP]
- 3.750 Inches Nominal
- Part Name Assigned By Controlling Agency [CXCY]
- Modified 1-1/2" Ss650 303 Stainless Steel U-Joint
- Special Features [FEAT]
- Ball Spring Oiler; Both Ends Chamfered.
DLA Procurement Analysis 3010-01-506-4140
Management Data 3010-01-506-4140
Air Force
- Fund:
- SF
- Stock fund applicable to items managed for the Air Force by the respective Inventory Control Point
- Budget:
- 9
- 57X4921.070 - General Support DIV - Air Force decentralized managed expense items (ERRC XB3, XF3) with a unit cost of less than $250,000 that are requisitioned/procured at base (retail) level from DLA, GSA, Army, Navy, Depot Maintenance Service, Air Force Industrial Fund (AFMC), local manufacture and commercial vendors
- Price Validation Code:
- N
- The current standard price in Catalog Management Data (CMD) has not analyzed or coded for LP/LM.
The price has not been analyzed or reviewed for accuracy.
ZOP or Standard price challenges are permissible but must be supported with adequate justification. However, if coded for Local Purchase (LP) or Fabrication/Manufacture as indicated with an (LM) Acquisition Advice Code of “L” or “F”, then it must be evaluated locally where purchased or fabricated.
- Expendability
Recoverability
Repairability: - N
- Expendable. Condemn at User. Stock Fund (except Munitions).
Navy
- Cognizance:
- 9B
- Navy-owned stocks of DLA material
Naval Inventory Control Point, Mechanicsburg
NATO Stock Numbers Related to 3010-01-506-4140
Freight Information 3010-01-506-4140
3010-01-506-4140 has freight characteristics.It has a National Motor Freight Classification (NMFC) of 123800. A Sub NMFC of X. It has a NMFC Description of JOINTS,UNIVERSAL,IN BXS/CRATES. 3010-01-506-4140 is rated as class 85 when transported by Less-Than Truckload (LTL) freight. It has a Uniform Freight Classification (UFC) number of 64100 which rates the freight between FCL and LCL. 3010-01-506-4140 has a variance between NMFC and UFC when transported by rail and the description should be consulted. It has a Water Commodity Code (WCC) of 593 for ocean manifesting and military sealift. 3010-01-506-4140 is not classified as a special type of cargo when transported by water. 3010-01-506-4140 is not a consolidation and does not exceed 84" in any dimension. It should be compatible with a standard 72" Aircraft Cargo Door when transported by air.
Packaging Data 3010-01-506-4140
- Responsible Activity
- Packaging Data Source
- Primary Inventory Control Activity (PICA)
- --
Item Pack Level (Unpackaged)
- Item Size
- Item Weight
- Characteristics
- Weight/Dimensions Category
- Fragility
- Item Preservation
- Item Weight
- --
- --
- Bare Metal Item
- Over 10lb
- Less than 85G
- Special Requirement
- --
Unit Pack Level (Packaged)
- Quantity per Pack
- Unit Size
- Unit Weight
- Unit Cube
- Preservation Method
- Cleaning/Drying
- Unit Size
- 1
- 3.8" H x -- W x -- L
- --
- --
- --
- Any Suitable Process
- 3.8" H x -- W x -- L
- Preservation Material
- Wrapping Material
- Cushioning/Dunnage
- Cushioning Thickness
- Container
- Special Marking
- Wrapping Material
- --
- --
- --
- --
- --
- No special marking
- --
Intermediate Pack Level
- Quantity of Unit Packs
- Container
- Any Suitable Fiber Box
Contracting Technical Data File (CTDF) 3010-01-506-4140 October 2021
Criticality and Quality
- Critical Item Code:
- Flight Safety:
- Life Support:
- Certified Samples:
- Serialization:
- First Article Test (FAT):
- Certificate of Quality Compliance:
- Production Lot Testing:
- Special Testing:
- Qualified Products List (QPL):
Commercial Properties
- Government Furnished Material:
- Government Furnished Tooling:
- Government Furnished Property:
- Price Evaluation Code:
- Diminshing Manufacturing Sources:
- Warranty:
- Commerical Off The Shelf (COTS):
- End Item Application:
- Auctioning Candidate:
- Source of Procurement:
- Contract Option:
Restrictions
- Boeing Rights Guard:
- Export Controlled:
- Controlled Technical Data Package (TDP):
- Restricted Technical Data Package (TDP):
- Contains Classified Material
- Weapons System Indicator Code (WSIC):
- Z
Packaging Requirements
- Packaging Determination Table:
- Packaging Review Code:
- Special Packaging Instruction Number (SPIN):
- Special Packaging Instruction Number Revision:
- Special Packaging Instruction Number Date:
- Pallet Reference Number Required: