3010-12-181-5577

4820-33-160-7103 4820331607103 331607103 is a self sensored actuating regulator designed to automatically regulate the flow of liquid or steam through a valve to maintain a predetermined temperature. designed to close or open a valve when a change in temperature is detected to avoid overheating of controlled unit. valve body not included. see also regulator (1), temperature and pressure.

5905-01-160-7103 5905011607103 011607103 is a resistor whose ohmic value cannot be adjusted or varied. the resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. the item must have inherent characteristics of inducing self-inductance. opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. exclut s suppressor, ignition interference. see also resistor (1), fixed, wire wound, noninductive.

5310-66-160-7103 5310661607103 661607103 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

5330-37-160-7103 5330371607103 371607103

8455-25-160-7103 8455251607103 251607103 is a device to be worn in conjunction with a shoulder sleeve insignia.