2995-01-673-3729

https//www.nsnlookup.com /nato/nato-stock-numbers/inc Aircraft Engine Tube Assembly (INC 53364) 2995-01-673-3729

2995-01-673-3738 Aircraft Engine Tube Assembly 4118047RNCC: D | RNVC: 9 | DAC: D 12 Jun 2018 2995-01-673-3729

3439-00-411-7950 3439004117950 004117950 is an item consisting of a handle, an electrical cord, an integral electrical heating element, and a soldering tip. it is designed to transmit heat from an integral electrical heating element to a soldering tip for the purpose of soldering. it may include a case, extra soldering tips, and the like. excludes soldering gun. see also soldering pencil, electric.

5320-01-411-7950 5320014117950 014117950 is a metallic or nonmetallic item, headed at one end, with a cylindrically shaped shank which may be tapered, grooved, or threaded. a locking collar or sleeve may be provided to perform the same holding action as the clinching portion of a conventional rivet. the shank may include an external wrenching facility which breaks off at a predetermined applied torque.

5310-99-411-7950 5310994117950 994117950 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.